Download Aprilia Parts Catalogue - Pacific Motosports
Download Aprilia Parts Catalogue - Pacific Motosports
Download Aprilia Parts Catalogue - Pacific Motosports
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2011 CATALOGUE
INTRODUCTION<br />
INTRODUCTION<br />
<strong>Aprilia</strong> Racing is the only official supplier of Racing<br />
<strong>Parts</strong> for <strong>Aprilia</strong> motorcycles.<br />
Each component is strictly derived from the long<br />
term and winning experience made by <strong>Aprilia</strong><br />
Racing on the toughest racetracks in the world,<br />
from the Superbike World Championship to the<br />
Dakar to the Motocross and Supermoto World<br />
Championship, and is designed and manufactured<br />
aiming to the maximum performances and reliability<br />
with the support of the best specialists available.<br />
SALES CONDITIONS<br />
• <strong>Aprilia</strong> Racing <strong>Parts</strong> are made in accordance with FIM technical<br />
race regulations and are NOT street legal<br />
• Before fitting any <strong>Aprilia</strong> Racing Part customers should check<br />
the technical regulation of their race class to ensure conformity<br />
• All the <strong>Aprilia</strong> Racing <strong>Parts</strong> can be used exclusively on closed<br />
circuits. <strong>Aprilia</strong> Racing declines any responsability in case of<br />
improper use<br />
• Prices and specifications are subject to changes without notice<br />
• Prices are intended to be paneuropean retail VAT excluded,<br />
any installation cost is not included. Installation by an<br />
<strong>Aprilia</strong> Official Dealer is recommended<br />
• <strong>Aprilia</strong> Racing <strong>Parts</strong> are dedicated to racing use and<br />
are sold without warranty<br />
• Be sure to carefully follow installation instructions<br />
and compatibility warnings<br />
track CROSS MOTARD RALLY<br />
HOW TO ORDER<br />
<strong>Aprilia</strong> Racing <strong>Parts</strong> can be ordered at any <strong>Aprilia</strong> Dealership in 3<br />
different moments, these ordering dates and their relative delivery<br />
dates are shown below:<br />
ORDERING DATES DELIVERY DATES<br />
January 2011 March 2011<br />
February 2011 May 2011<br />
June 2011 September 2011<br />
For further information and technical support please visit<br />
the following website:<br />
www.serviceaprilia.com/public/racing
RSV4 FACTORY<br />
RSV4 FACTORY<br />
| handling | electronic | engine |<br />
| handling | electronic | engine |<br />
BREMBO RACING PADS<br />
COT090186<br />
rear wheel<br />
FORGED MAGNESIUM BY MARCHESINI<br />
COT100172<br />
track<br />
track<br />
• Z04 racing compound<br />
• 16,5”x 6,50”<br />
• Supplied with valves, spacers and bearings<br />
front wheel<br />
FORGED MAGNESIUM BY MARCHESINI<br />
COT100171<br />
• 16,5”x 3,50”<br />
• Supplied with valves, spacers and bearings<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
RSV4 FACTORY<br />
RSV4 FACTORY<br />
| handling | electronic | engine |<br />
| handling | electronic | engine |<br />
TITANIUM SCREWS KIT<br />
WITH CRASH PADS INCLUDED<br />
COT100251<br />
CRASH PADS WITH TITANIUM SCREWS COT100250 SBK CLIPON BARS WITH TITANIUM SCREWS COT100252<br />
FG399 OHLINS RACING PRESSURIZED CARTRIDGE<br />
FOR FRONT SUSPENSION FORKS<br />
COS08160<br />
track<br />
track<br />
• For OEM Ohlins FG616 fork<br />
TITANIUM SCREWS KIT<br />
COT100249<br />
WHEELBASE +/-1,5 mm<br />
STEERING BUSHES wheelbase +/-3,0 mm<br />
WHEELBASE +/-4,5 mm<br />
RAKE +/-0,35 °<br />
COT090053<br />
COT090054<br />
COT090055<br />
COT090433<br />
CNC top YOKE SBK REPLICA<br />
COT100253<br />
• Wheelbase +/- 1,5/3/4,5 mm<br />
• Rake +/- 0,35°<br />
• Not suitable for ignition switch<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
RSV4 FACTORY<br />
RSV4 FACTORY<br />
| handling | electronic | engine |<br />
| handling | electronic | engine |<br />
APX STEP1 ECU AND<br />
RACING WIRE HARNESS SET<br />
COE10045<br />
ENGINE SETUP PALMTOP COE10046 RACING DASHBOARD/INSTRUMENT PANEL COE09042<br />
DATA ACQUISITION SENSORS KIT<br />
COE10048<br />
APX STEP2 ECU AND<br />
RACING WIRE HARNESS SET<br />
COE10047<br />
track<br />
• Traction-control push buttons included<br />
• Dedicated software<br />
• Lightweight needle<br />
track<br />
• Suspension gauges<br />
• Lambda sondes and controllers<br />
• Thermo couples<br />
• Oil temperature / pressure gauges<br />
ARES – ENGINE SETUP / MANAGEMENT SOFTWARE COE10022 AD VIEWER – DATA ANALYSIS SOFTWARE COE10027<br />
Allows adjustment of:<br />
• Injection/ignition mapping • Traction control<br />
• Quickshifter • Engine braking<br />
• Anti-wheeling • Position base (turn-by-turn management)<br />
• To check and manage all the information coming from the sensor set<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
RSV4 FACTORY<br />
RSV4 FACTORY<br />
| handling | electronic | engine |<br />
| handling | electronic | engine |<br />
RACING TITANIUM COMPLETE EXHAUST<br />
BY AKRAPOVIC<br />
COMS090024<br />
SEL +0.000<br />
HIGH COMPRESSION PISTON SET SEL +0.010<br />
SEL +0.020<br />
SEL +0.030<br />
COMS100031<br />
COMS100032<br />
COMS100033<br />
COMS100034<br />
RACING CAMSHAFT KIT COMS100035 STM SLIPPER CLUTCH COMS100036<br />
track<br />
• Titanium pipes<br />
• CNC aluminium flanges<br />
• Titanium muffler<br />
• Carbon fiber outershell<br />
• Carbon fiber bracket<br />
track<br />
• CNC machined forged aluminium<br />
• CR 14:1<br />
• Complete with segments<br />
• Available in 4 tolerance classes: +0,00, +0,010, +0,020 and +0,030mm<br />
• Complete with sprockets<br />
SLAVE AIR INDUCTION CAPS<br />
COMS100037<br />
OIL SUMP RACING GASKET AND FILTER KIT COMS100040 RADIATOR RACING PIPES COT100495<br />
• CNC Aluminium<br />
• Racing gasket<br />
• High flow oil filter<br />
• Special joint<br />
• Silicon rubber and aluminium<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
RSV4 FACTORY<br />
APRILIA & MAX BIAGGI<br />
| handling | electronic | engine |<br />
CARBON FIBER ENGINE COVERS - RIGHT<br />
COMS100038<br />
track<br />
CARBON FIBER ENGINE COVERS - LEFT<br />
COMS100039<br />
closedcircuit<br />
use only
MXV 4.5<br />
MXV 4.5<br />
| handling | engine |<br />
| handling | engine |<br />
RADIATOR KIT<br />
COT100359<br />
Alpina REAR spokeD wheel<br />
COT100358<br />
MOTARD<br />
MOTARD<br />
• H 2<br />
O aluminium radiators<br />
• With silicon pipes and brackets<br />
• Supplied with bearings, spacers and rear sprocket<br />
Alpina FRONT spokeD wheel<br />
COT100357<br />
• Supplied with bearings, spacers and rear sprocket<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
MXV 4.5<br />
MXV 4.5<br />
| handling | engine |<br />
| handling | engine |<br />
Titanium screws kit (78 pcs) COT100355 Motard fairing kit COT100356<br />
MXV Replica clutch kit<br />
MXV Replica CLUTCH DISK KIT<br />
COM100054<br />
COM100053<br />
Cylinders and distribution kit<br />
COM100056<br />
MOTARD<br />
Includes:<br />
• DallaValle saddle<br />
• Carbon fiber fueltank<br />
• Fenders<br />
• Carbon fiber air-filter cover<br />
MOTARD<br />
• CNC machined clutch drum<br />
• Modified hub (for better lubrication)<br />
• New washer and racing disk<br />
• Includes plates, collets, lifters, conrod screws, machined cylinders<br />
and cast iron piston rings (Racing ECU required)<br />
CROSS<br />
Hinson clutch kit<br />
COM100060<br />
Titanium conrods AND MACHINED CRANKSHAFT<br />
COM100058<br />
• CNC machined clutch drum<br />
• Modified hub (for better lubrication)<br />
• New washer and racing disk<br />
• Titanium conrods<br />
• Machined / lightweight crankshaft<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
MXV 4.5<br />
MXV 4.5<br />
| handling | engine |<br />
| handling | engine |<br />
Titanium complete exhaust by Arrow<br />
COT100367<br />
Titanium screws kit FOR ENGINE (136 pcs) COM100059 Overpressure valve kit COM100057<br />
MOTARD<br />
• Racing ECU required<br />
MOTARD<br />
• Requires crankcase machining in <strong>Aprilia</strong> Racing with specific machining tool<br />
CROSS<br />
CROSS<br />
Wallbro ECU UNIT<br />
COE10101<br />
• Wallbro ECU 13.200 rpm - necessary for:<br />
• Arrow exhaust<br />
• Distribution/cylinders kit<br />
• Conrods/crankshaft kit<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
MXV 4.5<br />
MXV 4.5<br />
| handling | engine |<br />
| handling | engine |<br />
Titanium footrest<br />
COT100360<br />
Titanium rear damper link kit<br />
COT100361<br />
RADIATOR KIT - aluminium H 2<br />
O RADIATORS<br />
with silicon Pipes and FIXING brackets<br />
COT100359<br />
CROSS<br />
CROSS<br />
• H 2<br />
O aluminium radiators<br />
• With silicon pipes and brackets<br />
FRONT WHEEL KIT<br />
COT100362<br />
REAR WHEEL KIT<br />
COT100363<br />
• Supplied with bearings, spacers and rear sprocket<br />
• Supplied with bearings, spacers and rear sprocket<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
MXV 4.5<br />
MXV 4.5<br />
| handling | engine |<br />
| handling | engine |<br />
Handlebar command kit<br />
COT100365<br />
Titanium screws kit (78 pcs)<br />
COT100368<br />
Cross fairing kit<br />
COT100366<br />
front Wave Braking disk SET<br />
COT100364<br />
CROSS<br />
Includes:<br />
• Throttle cables<br />
• Clutch lever and cable<br />
• Grips<br />
CROSS<br />
Includes:<br />
• DallaValle saddle<br />
• Carbon fiber fuel tank<br />
• Fenders<br />
• Number plate<br />
• Carbon fiber air-filter cover<br />
Complete with:<br />
• Wheelspindle<br />
• CNC brake caliper bracket<br />
• Carbon fiber brake cover<br />
Carbon fiber belly pan<br />
and dedicated gear pedal<br />
COT100369<br />
closedcircuit<br />
use only<br />
closedcircuit<br />
use only
EVOLUZIONE RALLY RAID KIT - RXV 450<br />
EVOLUZIONE RALLY RAID KIT - RXV 450<br />
| ENGINE | VEHICLE |<br />
| ENGINE | VEHICLE |<br />
ENGINE<br />
RALLY<br />
<strong>Aprilia</strong> Racing offers those who like to take part to desert<br />
rallies the opportunity to buy the 450cc engine “ready to<br />
race” and assembled by the <strong>Aprilia</strong> Racing department<br />
technicians.<br />
The engine is characterized by a long list of dedicated<br />
parts, developed by <strong>Aprilia</strong> Racing to improve performance<br />
and make it suitable for the extremely intense use in<br />
long African rallies, characterized by extremely hot air<br />
temperatures and never-ending straights ridden at full gas.<br />
RALLY<br />
COMPLETELY MODIFIED ENGINE<br />
C/O APRILIA RACING<br />
• Clutch kit<br />
• Plates<br />
• Collets<br />
• Pads<br />
• Pankl conrods screws<br />
• Oil tank inlet cap<br />
• Oil tank outlet magnetic cap<br />
• Rear cylinder head cover<br />
• Blow-by flange<br />
• Kokusan flywheel<br />
• Manpower<br />
The modifications allow longest maintenance routines, which is<br />
mandatory when races are thousands kilometres long.<br />
The new clutch kit with lightweight hub and drum, together with<br />
the new disk kit, gives a better feeling and it is more efficient in the<br />
worst conditions.<br />
The new distribution kit (plates, collets, pads) and the new<br />
conrods screws, gives a major reliability and allow to increase the<br />
rpm limiter from 12.500 to 13.200.<br />
A different blow-by circuit gives a better lubrication of the rear<br />
cylinder and a major affordability, while the new, heavier, flywheel<br />
gives a smoother throttle response to improve traction and<br />
rideability on hard surfaces.<br />
To complete the kit, aluminium oil tank caps with magnetic inserts<br />
to keep metal impurities far from the crankshaft.<br />
A tuning up service is also available on the standard<br />
RXV 450 engine. By sending a standard engine to <strong>Aprilia</strong><br />
Racing it will be updated and modified by <strong>Aprilia</strong> Racing<br />
technicians to make it suitable for the hardest desert races.<br />
Note: engines, engine kits and vehicle kits are exclusively<br />
distributed by Giofil Team<br />
More info at: www.giofil.com
EVOLUZIONE RALLY RAID KIT - RXV 450<br />
RXV RALLY<br />
| ENGINE | VEHICLE |<br />
| ENGINE | VEHICLE |<br />
VEHICLE KIT<br />
RALLY<br />
Nothing is missing in the vehicle kit to transform a<br />
standard RXV 450 into a “desert race ready” bike.<br />
<strong>Aprilia</strong> Racing technicians have done everything necessary<br />
to ensure the very best performance.<br />
Starting from the new frame, reinforced and modified to house<br />
4 aluminium hand-made fuel tanks, with internal anti-rinse<br />
bulkheads and fast joints, where new, larger and more resistant<br />
billet aluminium footrests and new risers are installed.<br />
The new front frame houses the completely modified wiring to<br />
match dedicated push buttons and dashboard (not included),<br />
2 polyellipsoidal headlights and an oil radiator, while the new rear<br />
frame houses an aluminium tools store.<br />
Another tool store and a 1,5 litres water tank are housed in the<br />
new engine guard, made of carbon fibre as the whole fairing kit<br />
and fenders.<br />
The new rims have tangential reinforced spokes and reinforced<br />
nipples and a new rear anti-jerk, to face any kind of stress. A<br />
rotational steering damper gives the best vehicle control even in<br />
the worst situations, thanks also to the new carbon fibre saddle.<br />
Moreover, a new titanium 2into1into2 complete exhaust is<br />
supplied, together with new silicone rubber radiator pipes.<br />
RALLY<br />
COMPLETE VEHICLE KIT<br />
• Modified frame<br />
• Complete footrests<br />
• Side stand<br />
• Risers<br />
• Ohlins steering damper<br />
• Gear pedal<br />
• Engine guard with tools store<br />
• Drinkable water tank<br />
• Rear wheel with brake disk<br />
• Brake lever<br />
• Right front fuel tank<br />
• Left front fuel tank<br />
• Right rear fuel tank<br />
• Left rear fuel tank<br />
• Fuel tank cap<br />
• Gearbox oil tank inlet cap<br />
• Dalla Valle saddle<br />
• Carbon fibre saddle support<br />
• Front fender<br />
• Rear fender<br />
• Headlight<br />
• Tail light<br />
• Complete exhaust system<br />
• Racing wiring<br />
• Dashboard support frame<br />
• Oil cooler<br />
• Tools store<br />
• Silicone rubber cooler pipes<br />
• Full fairing<br />
• Fast joints<br />
Note: engines, engine kits and vehicle kits are exclusively<br />
distributed by Giofil Team<br />
More info at: www.giofil.com
<strong>Aprilia</strong> Racing<br />
Via Marconi, 9<br />
30033 Noale (VE)<br />
Italy<br />
racing_sales@aprilia.It