Rope - True Radius Marketing
Rope - True Radius Marketing
Rope - True Radius Marketing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ROPES | ACCESSORIES<br />
<strong>Rope</strong> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1<br />
<strong>Rope</strong> Accessories . . . . . . . . . . . . . . . . . . . . . . .8<br />
BIGshot, Throwline and Throw Weights . . . . .10<br />
Friction Savers and Split Tails . . . . . . . . . . . . .14<br />
SADDLES | ACCESSORIES<br />
Saddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15<br />
Safety Belts and Harnesses . . . . . . . . . . . . . .22<br />
Saddle Accessories . . . . . . . . . . . . . . . . . . . .23<br />
CLIMBERS<br />
Climbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25<br />
Replacement Gaffs and Accessories . . . . . . .28<br />
Climber Straps and Pads . . . . . . . . . . . . . . . .29<br />
HARDWARE<br />
Lanyards, Fliplines, and Positioning Straps . .32<br />
Carabiners . . . . . . . . . . . . . . . . . . . . . . . . . . .36<br />
Ascenders and Descenders . . . . . . . . . . . . . .41<br />
Pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44<br />
RIGGING | GEAR<br />
Rigging Slings, Blocks, and Straps . . . . . . . . .47<br />
Port-A-Wrap . . . . . . . . . . . . . . . . . . . . . . . . . .48<br />
SAWS | PRUNERS<br />
Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49<br />
Scabbards . . . . . . . . . . . . . . . . . . . . . . . . . . .53<br />
Pruners . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54<br />
SAFETY<br />
Helmets and Face Shields . . . . . . . . . . . . . . .60<br />
Hearing Protection . . . . . . . . . . . . . . . . . . . . .61<br />
Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . .63<br />
Arborist DVD and Books . . . . . . . . . . . . . . . . .66<br />
FORESTRY<br />
Chain, Bars, and Bar/Chain Combos . . . . . . .68<br />
Chainsaw Accessories . . . . . . . . . . . . . . . . . .74<br />
<strong>Rope</strong> and Cable Pullers . . . . . . . . . . . . . . . . .77<br />
Logging Supplies . . . . . . . . . . . . . . . . . . . . . .78<br />
Carabiner Quick Reference Chart . . . . . . . . . . . . . . . .79<br />
<strong>Rope</strong> Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .80
Velocity Cool ➤ CLIMBING ROPE<br />
7/16" - 24-Strand - 6,000 lbs. tensile - 5.6 lbs./100 ft.<br />
Premium grade climbing line designed to offer tree care professionals<br />
quick and easy access to the tops of trees. Arborists who<br />
prefer that “broken in” feeling will appreciate Samson’s proprietary<br />
“Sure Grip” technology which gives Velocity that broken-in<br />
feeling the first time used. The lightweight and firm construction<br />
offers the arborist exceptional footlocking capabilities, quick<br />
access, excellent knot holding ability and a spliced strength of<br />
6,000 lbs.<br />
ArborMaster ® ➤ CLIMBING ROPE<br />
1/2" - 16-Strand - 8,100 lbs. tensile - 7.7 lbs./100 ft.<br />
World-class champion climbers and professionals at<br />
ArborMaster ® Training worked closely with Samson engineers to<br />
develop the ultimate climbing line. ArborMaster ropes are<br />
premium quality 16-strand ropes offering a smooth durable<br />
surface to optimize footlocking. They are non-milking, making<br />
them spliceable at both ends right out of the bag. This allows<br />
you to alternate the working end of the rope from the first use<br />
maximizing the service life of the rope.<br />
• 11mm (7/16”) diameter<br />
• “Sure Grip” Technology<br />
• Lightweight<br />
• Quicker climbing<br />
• Less fatigue<br />
• Throws higher with greater<br />
accuracy<br />
• Excellent knot holding ability<br />
• Works well with hardware<br />
• Exceptional access line<br />
• Great for footlocking<br />
• Maximum firmness for all<br />
climbing techniques<br />
• High visibility in trees<br />
•Low stretch<br />
• Full size 1/2" diameter makes<br />
for an easy grip<br />
• Excellent knot-heat resistance<br />
• Available in spliced units<br />
• No milking<br />
• Maintains excellent service<br />
flexibility<br />
• Spliceable at both ends<br />
Velocity Cool<br />
B1SV50120PB 120'<br />
B1SV50150PB 150'<br />
B1SV50150PBS<br />
150' w/spliced eye<br />
B1SV50600RE 600'<br />
ArborMaster ® Blue Streak<br />
B1BS50120PB 120'<br />
B1BS50150PB 150'<br />
B1BS50150PBS<br />
150' w/spliced eye<br />
B1BS50600RE 600'<br />
Velocity Hot<br />
B1SVH50120PB 120'<br />
B1SVH50150PB 150'<br />
B1SVH50150PBS<br />
150' w/spliced eye<br />
B1SVH50600RE 600'<br />
ArborMaster ® Gold Streak<br />
B1GS50120PB 120'<br />
B1GS50150PB 150'<br />
B1GS50150PBS<br />
150' w/spliced eye<br />
B1GS50600RE 600'<br />
ArborMaster ® Multi-Color<br />
B1MC50120PB 120'<br />
B1MC50150PB 150'<br />
B1MC50150PBS<br />
150' w/spliced eye<br />
B1MC50600RE 600'<br />
REGULATION ANSI Z133.1-2006 requires that all climbing rope be made<br />
from synthetic fibers and have a minimum breaking strength of 5,400 pounds<br />
(24.02 kN) when new. At a load of 540 pounds (2.402 kN), the maximum working<br />
elongation shall not exceed 7%.<br />
Accessories<br />
2 ROPES | ACCESSORIES<br />
<strong>Rope</strong>s
<strong>True</strong>-Blue ➤ CLIMBING ROPE<br />
1/2" - 12-Strand - 7,300 lbs. tensile - 8.8 lbs./100 ft.<br />
<strong>True</strong>-Blue is an all polyester climbing rope with high strength, low<br />
stretch, excellent abrasion resistance and a long service life. It’s<br />
got a great feel with good flexibility and knot holding abilities.<br />
The single braid construction eliminates the need for milking<br />
and stays firm and round in use. <strong>True</strong>-Blue can also be used for<br />
light duty rigging applications. <strong>True</strong>-Blue braided climbing line is<br />
a unique combination of solution dyed blue polyester fiber<br />
wrapped over white polyester in a Samson 12-Strand braid.<br />
The result is permanent color that won’t fade or run, with high<br />
visibility in trees, that allows easy detection of cover wear.<br />
• 100% polyester<br />
• Low stretch, high strength<br />
• No milking necessary<br />
• Stays firm and round in use<br />
• Maintains excellent flexibility<br />
• Maximum service life<br />
• Single braid<br />
• Light/medium duty rigging<br />
operations<br />
Arbor-Plex ➤ CLIMBING ROPE<br />
1/2" - 12-Strand - 6,000 lbs tensile - 6.8 lbs./100 ft.<br />
The unique construction of Arbor-Plex wraps tough polyester<br />
jacket fibers around polyolefin center fibers creating a lightweight,<br />
high-strength rope with maximum resistance to wear and<br />
fiber fusing. Arbor-Plex uses a proprietary construction to tighten<br />
the braid and keep the rope round and firm for knot control and<br />
snag resistance. Arbor-Plex was the first synthetic rope designed<br />
specifically for the arborist industry and remains one of the best<br />
values in climbing lines today.<br />
• Excellent wear and snag<br />
resistance<br />
• Excellent knot holding ability<br />
• Works well when wet<br />
• Economical - good value<br />
• Single braid<br />
• No twist stripe<br />
<strong>True</strong>-Blue<br />
B1TB50120PB 120'<br />
B1TB50150PB 150'<br />
B1TB50200PB 200'<br />
B1TB50600RE 600'<br />
Arbor-Plex<br />
B1AP50120PB 120'<br />
B1AP50150PB 150'<br />
B1AP50600RE 600'<br />
when your office is 50 ft. up…<br />
SAMSON WON’T LET YOU DOWN<br />
Ask the experts what they prefer. Chances are they'll say Samson.<br />
The names you have come to trust, come from Samson.<br />
www.samsonrope.com<br />
ArborMaster<br />
Tenex<br />
Zing-It<br />
Velocity<br />
Arbor-Plex<br />
<strong>True</strong>-Blue<br />
Tree-Master<br />
Stable Braid<br />
Pro-Master<br />
ROPES | ACCESSORIES<br />
3
Safety Blue ➤ CLIMBING ROPE<br />
1/2" - 16-Strand - 7,700 lbs. tensile - 7.0 lbs./100 ft.<br />
Braided Safety Blue is designed to stay round and firm while<br />
providing an important indicator for retiring if the cover<br />
becomes abraded or cut. The construction significantly reduces<br />
weight without compromising firmness and roundness while<br />
maintaining excellent durability and grip. Cover yarns are treated<br />
with a special formula enhancing abrasion resistance and<br />
extending the service life of<br />
the rope. Available in standard<br />
white, Hi-Vee orange<br />
and Ultra-Vee green.<br />
Safety Pro 12 ➤ CLIMBING ROPE<br />
1/2" - 12-Strand - 6,600 lbs. tensile - 7.55 lbs./100 ft.<br />
Designed for applications where a fixed spliced eye is not necessary,<br />
Safety Pro 12 gives you performance never before available.<br />
Its unique construction creates a rope that has low elongation<br />
with very little bounce and is easy to knot, yet resists flattening<br />
and glazing.<br />
• Excellent knot holding<br />
capabilities<br />
• Resists glazing and flattening<br />
• Very low bounce<br />
• High visibility cover patterns<br />
available<br />
• Perfect choice for critical<br />
safety line<br />
• Blue safety core acts as a<br />
wear and damage indicator<br />
warning<br />
• Abrasion resistant<br />
• Extended useful life<br />
Safety Pro 12<br />
B1NESP50120PB 120'<br />
B1NESP50150PB 150'<br />
B1NESP50600RE 600'<br />
Braided Safety Blue<br />
B1NESB50120PB 120'<br />
B1NESB50150PB 150'<br />
B1NESB50600RE 600'<br />
KM-III Statis Kernmantle ➤ CLIMBING ROPE<br />
• Stronger than standard<br />
arborist rope<br />
• Perfect for Single <strong>Rope</strong><br />
Technique (SRT) systems like<br />
the Petzl Sequoia<br />
7/16" – 8,000 lbs. tensile – 6.2 lbs./100 ft.<br />
• More responsive<br />
• Meets standards associated<br />
with rescue climbing and<br />
rappelling operations<br />
• Dual certified (CE and NFPA)<br />
Hi-Vee<br />
B1NEHV50120PB 120'<br />
B1NEHV50150PB 150'<br />
B1NEHV50600RE 600'<br />
B1NEKM716150PB<br />
B1NEKM716200PB<br />
B1NEKM716600RE<br />
150' Poly Bag<br />
200' Poly Bag<br />
600' Reel<br />
Ultra-Vee<br />
B1NEUV50120PB 120'<br />
B1NEUV50150PB 150'<br />
B1NEUV50600RE 600'<br />
REGULATION ANSI Z133.1-2006 (8.1.4) - Arborists shall<br />
inspect climbing lines, worklines, lanyards, and other climbing<br />
equipment for damage, cuts, abrasion, and/or deterioration<br />
before each use and shall remove them from service if signs of<br />
excessive wear or damage are found. (Copyright International Society<br />
of Arboriculture. Used with permission.)<br />
4 ROPES | ACCESSORIES
Diamond Back ➤ CLIMBING ROPE<br />
1/2" - 16-Strand - 8,000 lbs. tensile - 7.73 lbs./100 ft.<br />
This rope features a non-rotational construction that leads to<br />
fewer snags and minimal abrasion for longer rope life.<br />
• Non-rotational<br />
• Abrasion resistant<br />
• Excellent flexibility<br />
• Excellent knot holding ability<br />
• Minimal cover milking<br />
Diamond Back/Bag Combo<br />
This rope/bag combination comes with 150' of our Diamond<br />
Back climbing rope in a deluxe bag. The bag is constructed of<br />
strong nylon canvas with a waterproof vinyl inner lining. There<br />
are two heavy-duty handles made of nylon webbing for easy<br />
transportation. It also has two exterior pockets with flaps that<br />
snap shut and nickel-plated hardware.<br />
A large grommet in the top of<br />
the bag allows for easy rope<br />
access without opening the<br />
zippered top flap.<br />
B1PDB50150BAG 150'<br />
Diamond Back<br />
B1PDB50120PB 120'<br />
B1PDB50150PB 150'<br />
B1PDB50600RE 600'<br />
ROPES | ACCESSORIES<br />
5
Stable Braid ➤ RIGGING ROPE<br />
Double Braid Firm Polyester<br />
Stable Braid is a polyester double braid with high strength, low<br />
stretch, snag resistance and excellent durability. Bright Samthane<br />
coating improves visibility and<br />
resistance to abrasion.<br />
•Low stretch<br />
• Excellent abrasion resistance<br />
• High strength-to-weight ratio<br />
• Flexible and easy to handle<br />
• Minimal UV degradation<br />
• Torque-free<br />
• Spliceable<br />
• Durable<br />
Tenex ➤ RIGGING ROPE<br />
12-Strand Samthane-Coated Polyester<br />
Tenex is a 12-strand construction with a single end per carrier. It<br />
offers high strength and abrasion resistance in a low stretch<br />
rope. The 12-strand construction with Samson’s proprietary<br />
Samthane coating keeps Tenex round and firm - perfect for use<br />
in blocks and around sheaves for stringing or pulling lines.<br />
1/2" - Double Braid - 10,400 lbs. tensile - 8.2 lbs./100 ft.<br />
B1SB50150PB 150' π<br />
B1SB50600RE 600'<br />
9/16" - Double Braid - 13,300 lbs. tensile - 11.0 lbs./100 ft.<br />
B1SB916150PB 150'<br />
5/8" - Double Braid - 16,300 lbs. tensile - 14.0 lbs./100 ft.<br />
B1SB58150PB 150'<br />
B1SB58200PB 200'<br />
B1SB58600RE 600'<br />
3/4" - Double Braid - 20,400 lbs. tensile - 18.0 lbs./100 ft.<br />
B1SB34150PB 150'<br />
B1SB34600RE 600'<br />
3/4" - Double Braid - 20,400 lbs. tensile - 18.0 lbs./100 ft.<br />
B1SB34150PBS<br />
Tenex-TEC ➤ RIGGING ROPE<br />
150' w/spliced eye<br />
Single Braid Polyester Sling Construction<br />
Tenex-TEC is a 12-strand polyester rope with Two Ends per<br />
Carrier (TEC). This allows the rope to conform better to surfaces<br />
and enhances its holding capability. It is easily spliced and<br />
perfect for slings.<br />
3/8" - 12-Strand - 5,800 lbs. tensile - 4.2 lbs./100 ft.<br />
B1T38100PB 100'<br />
1/2" - 12-Strand - 11,800 lbs. tensile - 8.5 lbs./100 ft.<br />
B1T50100PB 100'<br />
5/8" - 12-Strand - 17,100 lbs. tensile - 13.1 lbs./100 ft.<br />
B1T58100PB 100'<br />
3/4" - 12-Strand - 22,400 lbs. tensile - 17.2 lbs./100 ft.<br />
B1T34100PB 100'<br />
AmSteel ➤ RIGGING ROPE<br />
12-Strand Braided Dyneema Fiber<br />
AmSteel is an unbelievably strong 12-strand braided rope of<br />
Dyneema ® fiber with Samson’s proprietary Samthane coating. It<br />
is a non-rotational rope that yields extremely high strength and<br />
low stretch; equivalent to wire rope with one-seventh the weight.<br />
It is flexible, spliceable and resists flex-fatigue and abrasion.<br />
• Equivalent strength of wire<br />
• Extremely light (it floats)<br />
• Highly abrasion resistant<br />
• Non-rotational<br />
• Equivalent stretch properties<br />
of wire<br />
• 12-strand Samthane coated<br />
polyster<br />
• Enhanced wear life<br />
• Easy 12-strand splice<br />
• Effective alternative to double<br />
braid when splicing is a<br />
consideration<br />
AmSteel Black: 1/4" - 12-Strand - 7,400 lbs. tensile - 1.6 lbs./100 ft.<br />
B1AS14150PBS<br />
150' w/spliced eye<br />
3/8" - 12-Strand - 6,100 lbs. tensile - 4.3 lbs./100 ft.<br />
B1T38100TECPB 100'<br />
1/2" - 12-Strand - 13,100 lbs. tensile - 10.0 lbs./100 ft.<br />
B1T50100TECPB 100'<br />
5/8" - 12-Strand - 18,800 lbs. tensile - 14.8 lbs./100 ft.<br />
B1T58100TECPB 100'<br />
3/4" - 12-Strand - 24,800 lbs/ tensile - 19.2 lbs./100 ft.<br />
B1T34100TECPB 100'<br />
AmSteel Blue: 3/8" - 12-Strand - 19,600 lbs. tensile - 3.6 lbs./100 ft.<br />
B1ASB38600RE 600'<br />
Accessories<br />
6 ROPES | ACCESSORIES<br />
<strong>Rope</strong>s
Arbor-Plex ➤ RIGGING ROPE<br />
12-Strand Braided Polyester/Polyolefin<br />
Arbor-Plex is an economical, torque-balanced twelve strand<br />
rope. The tightly braided construction of Arbor-Plex holds its<br />
shape with use. It has excellent wear resistance, is lightweight<br />
and has high rigging line products strength. It is widely known<br />
and trusted as a “workhorse” for virtually all uses. Arbor-Plex is<br />
easily identified by a green stripe assuring any twist in the line<br />
is easily detectable.<br />
• Excellent wear and snag<br />
resistance<br />
• Excellent knot holding ability<br />
• Works well when wet<br />
• Economical<br />
• No twist stripe<br />
• Single braid<br />
Treeline ➤ RIGGING ROPE<br />
12-Strand Braided Polyester<br />
Treeline has a tough, durable cover treated with a protective<br />
finish that minimizes abrasion<br />
and extends rope life.<br />
Perfect for use as a bull<br />
rope or speedline.<br />
•Low stretch<br />
• Good chemical resistance<br />
• Torque-free, non-rotating<br />
• Easy to coil and belay<br />
• Good UV resistance<br />
5/8" - 12-Strand - 9,000 lbs. tensile - 12.0 lbs./100 ft.<br />
B1AP58150PB 150'<br />
B1AP58600RE 600'<br />
3/4" - 12-Strand - 12,000 lbs. tensile - 16.2 lbs./100 ft.<br />
B1AP34150PB 150'<br />
B1AP34600RE 600'<br />
Pro-Master ➤ RIGGING ROPE<br />
3-Strand Twisted Polyester/Polyolefin<br />
A firm and balanced three-strand rope offering reliability as well<br />
as economy. Pro-Master is lightweight, holds its shape even<br />
under heavy use and the spun fiber on the surface offers excellent<br />
grip, handling and knot holding. It is identified by a green<br />
surface tracer. For performance and price, it is one of the finest<br />
three-strand rigging lines in the marketplace.<br />
5/8" - 12-Strand - 8,600 lbs. tensile - 11.0 lbs./100 ft.<br />
B1NEBT58150PB 150'<br />
B1NEBT58600RE 600'<br />
3/4" - 12-Strand - 12,200 lbs. tensile - 15.0 lbs./100 ft.<br />
B1NEBT34150CL 150'<br />
Rigger’s Choice ➤ RIGGING ROPE<br />
Double Braid Polyester/Nylon - Urethane Coated<br />
Rigger’s Choice is a double-braid/composite construction of<br />
polyester cover over nylon core for higher tensile strength and<br />
better shock load performance. It is urethane coated for abrasion<br />
resistance.<br />
• High tensile strength<br />
• Good abrasion resistance<br />
• Good knot control<br />
• Moderate stretch<br />
• Keeps shape under load<br />
• Better shock load performance<br />
• Soft touch<br />
• Excellent abrasion resistance<br />
• High strength-to-weight ratio<br />
• Flexible and easy to handle<br />
• Minimal UV degradation<br />
• Easy to splice<br />
5/8"<br />
1/2" - 3-Strand - 6,300 lbs. tensile - 6.5 lbs./100 ft.<br />
B1PM50150PB 150'<br />
B1PM50600RE 600'<br />
5/8" - 3-Strand - 8,500 lbs. tensile - 9.6 lbs./100 ft.<br />
B1PM58150PB 150'<br />
B1PM58600RE 600'<br />
3/4" - 3-Strand - 10,900 lbs. tensile - 13.9 lbs./100 ft.<br />
B1PM34150PB 150'<br />
B1PM34600RE 600'<br />
3/4"<br />
5/8" - Double Braid - 15,320 lbs. tensile - 12.0 lbs./100 ft.<br />
B1PRC58150PB 150'<br />
B1PRC58600RE 600'<br />
3/4" - Double Braid - 25,730 lbs. tensile - 16.6 lbs./100 ft.<br />
B1PRC34150PB 150'<br />
B1PRC34600RE 600'<br />
ROPES | ACCESSORIES<br />
7
Static Kernmantle Composite <strong>Rope</strong>s ➤ FIRE AND RESCUE ROPE<br />
These life lines are among the finest for fire and rescue services.<br />
<strong>Rope</strong>s feature a block creel static kernmantle construction of<br />
polyester cover over a nylon core and are firm and flexible<br />
enough to be tied. This rope features resistance to most chemicals<br />
and has excellent retention in extreme conditions. U.L. certified<br />
to NFPA 2001 standards. <strong>Rope</strong> comes with a waterproof<br />
ID tape.<br />
• Firm and flexible<br />
• Resistance to most chemicals<br />
• Excellent retention in extreme conditions<br />
• 15:1 WLL safety factor<br />
7/16" - Kernmantle - 6,900 lbs. tensile - 6.4 lbs./100 ft.<br />
B1PKR716200PB 200'<br />
B1PKR716600SP 600'<br />
1/2" - Kernmantle - 10,500 lbs. tensile - 8.7 lbs./100 ft.<br />
B1PKR50200PB 200'<br />
B1PKR50600SP 600'<br />
<strong>Rope</strong> Accessories<br />
All Purpose Gear Bag<br />
This convenient 630-denier polyester bag<br />
allows you to carry your positioning saddle,<br />
helmet, hand saw, rope and all<br />
accessories.<br />
• Zipper down the side for easy access<br />
• Roomy, zippered outside compartment<br />
• Hand saw pouch measuring<br />
5" wide x 13" high x 2" deep<br />
• Keeps your saw away from your rope<br />
• Designed with mesh for breathability<br />
• Padded shoulder straps for hands-free<br />
carrying<br />
• Padded for comfort to back<br />
• 15" in diameter x 29" high<br />
B1AB0807185<br />
Deluxe <strong>Rope</strong> Bag with Shoulder<br />
Straps<br />
Similar to the deluxe bag but with shoulder<br />
straps.<br />
B1AB1215<br />
Basic <strong>Rope</strong> Bag<br />
Spiral wire prevents bag from collapsing<br />
when rope is fed into it. Snaps and Dees<br />
keep the bag collapsed when not in use.<br />
There is a convenient drawstring top closure<br />
for quick and easy access. Holds 150'<br />
of 1/2" rope. 12" in diameter x 14" high.<br />
B1AB0807151<br />
8 ROPES | ACCESSORIES<br />
Bull <strong>Rope</strong> Deployment Bag<br />
Holds 200' of 5/8" lowering line. Padded<br />
shoulder strap for easy and comfortable<br />
carrying with two roomy outside pockets<br />
for storage of block and rope.<br />
15" in diameter x 18" high.<br />
B1AB0807161<br />
Deluxe<br />
Mesh<br />
Carry All<br />
Perfect for carrying<br />
arborist<br />
gear to the job<br />
site with a<br />
combination<br />
of nylon cloth<br />
and mesh for<br />
durability. Drawstring top for easy access.<br />
Zipper runs length of the bag. 15" in<br />
diameter x 28" high.<br />
B1AB36154<br />
Accessories<br />
<strong>Rope</strong>s
Double End <strong>Rope</strong> Bag<br />
Perfect when you need easy access to<br />
more than one rope. Holds a 200' 1/2"<br />
rope and a 150' 1/2" rope. There are convenient<br />
drawstring closures at both ends<br />
with quick, easy access to both ropes.<br />
12" in diameter x 20" high.<br />
B1AB0807175<br />
Deluxe <strong>Rope</strong> Bag<br />
Holds 150' of 1/2" or 9/16" rope. Bag has<br />
2 outside pockets with handy snaps.<br />
11" in diameter x 15" high.<br />
B1AB0807156<br />
Samson <strong>Rope</strong> Splicing Manual<br />
Over 160 pages of instructions for splicing<br />
Class I and Class II splices for 3-Strand,<br />
6-Strand, 8-Strand, 12-Strand, 16-Strand,<br />
8x3 Strand, Core Dependent, Double<br />
Braid, and Round Plait <strong>Rope</strong>s.<br />
B1AMAN<br />
Samson <strong>Rope</strong> Splicing Kit<br />
This splicing kit includes an instruction<br />
sheet, small pusher, and the following<br />
fids: 1/4" (5mm), 5/16" (8mm), 3/8"<br />
(9mm), 7/16" (10mm), and 1/2" (12mm).<br />
B1ABKIT<br />
Anchor Bridge<br />
Climbing System<br />
This system modifies<br />
the split tail system in<br />
order to give it a self<br />
tending capability. It<br />
allows the climber to<br />
be much safer and<br />
more efficient in a<br />
tree. Adaptable to any<br />
harness, climbing line,<br />
climbing hitch, and hitch cord, the Anchor<br />
Bridge greatly reduces the upper body<br />
stress associated with tree climbing and<br />
eliminates slack in a climber’s system. The<br />
set includes 2 custom spliced eye-and-eye<br />
tails and #3 bronze swivel eye boat snap.<br />
B1ABR7102<br />
<strong>Rope</strong> Burner<br />
Melts through all types of synthetic<br />
rope. Automatically seals ends<br />
to prevent unraveling. 5' power<br />
cord 120-volt AC.<br />
B1AB84<br />
<strong>Rope</strong> Counter<br />
Fits 1/4" to 3/4" <strong>Rope</strong> (6mm -<br />
20mm). Cordage is visible and<br />
accessible during its travel<br />
through the measurer.<br />
B1AB1430<br />
ROPE STRENGTH<br />
Standards for <strong>Rope</strong> Strength and Usage<br />
New <strong>Rope</strong> Tensile Strengths: New <strong>Rope</strong> tensile strengths are based on tests of new and unused rope of standard construction in accordance<br />
with manufacturer’s Standard Test Methods. It can be expected that strengths will decrease as soon as a rope is put into use. Because of<br />
the wide range of rope use, changes in rope conditions, exposure to many factors affecting rope behavior, and the possibility of risk to life<br />
and property, it is impossible to cover all aspects of rope applications or to make blanket recommendations as to working loads.<br />
Working Loads: Working loads are the loads that a rope is subject to in everyday activity. They are normally expressed as a percentage of<br />
new rope strength and should not exceed 10% unless specified by the manufacturer. A point to remember is that a rope may be severely<br />
overloaded or shock loaded without breaking. However, damage and strength loss may have occurred without any visible indication. The<br />
next time the rope is used under normal working loads, the acquired weakness may cause it to break.<br />
ROPES | ACCESSORIES<br />
9
Professional Tree Care Tools<br />
Throwline<br />
Dynaglide by New England <strong>Rope</strong>s<br />
This highly visible snag free throwline is made from 100% HMPE<br />
(High Modulus Polyethylene) that is pre-stretched and tensile-set<br />
then treated with an abrasion resistant vinyl coating that easily<br />
glides over bark. The compact design glides easily over branches<br />
allowing lighter throw weights.<br />
2 mm - 1,000 lbs. tensile – 0.1 lbs./100 ft.<br />
Dynaglide<br />
B1ABDG150GR 150' Fluorescent Green<br />
B1ABDG150OR 150' Fluorescent Orange<br />
B1ABDG200GR 200' Fluorescent Green<br />
B1ABDG200OR 200' Fluorescent Orange<br />
Accessories<br />
<strong>Rope</strong>s ROPES | ACCESSORIES 11
Throwline BIGshot<br />
The BIGshot has been redesigned and is more accurate and 25% lighter than before! Thanks to computeraided<br />
design (CAD), Jameson was able to reduce excess bulk and weight from the head assembly while<br />
keeping the same wide-fork dimension that has made this such a popular throwline accessory. While they<br />
were at it, Jameson redesigned the launch pad to reduce in-air projectile rotation by 50%, greatly improving<br />
accuracy (also available as a sling replacement for older models). Jameson improved the leading and most<br />
effective means of accurately launching a throw weight into tree canopies and over targets up to 200 feet.<br />
BIGshot<br />
B1ABSET1027<br />
B1AB16421<br />
B1FG4<br />
B1FG4F<br />
B1REC125<br />
BIGshot with Two 4' Poles<br />
Replacement Pouch with Tubing<br />
4' Extension Pole<br />
4' Base Pole<br />
Rubber End Cap<br />
10 ROPES | ACCESSORIES
Throwline<br />
Throwline Bucket Bag<br />
Zing-It<br />
The first throwline line designed specifically for the professional<br />
arborist. Samson’s Zing-It offers high strength, low stretch, and<br />
excellent abrasion resistance to enhance durability - all in a<br />
small diameter, lightweight throwing line.<br />
Zing-It helps you achieve higher throws with lighter weights,<br />
greater control due to its low stretch, and the ability to pull down<br />
“hangers” due to its high strength. The special coating reduces<br />
abrasion and allows Zing-It to glide easily over the roughest<br />
bark. Zing-It’s low coefficient of friction allows the bag to easily<br />
reach the ground on the first throw. Use for either hand or<br />
mechanical throwing.<br />
Zing-It<br />
B1AB811017 1.75 mm 180'<br />
B1AB811022 2.2 mm 180'<br />
FreeThrow Line<br />
1.75 mm - 400 lbs. tensile - 0.12 lbs./100 ft.<br />
2.2 mm - 580 lbs. tensile - 0.16 lbs./100 ft.<br />
FreeThrow is the ultimate<br />
in throwline and<br />
utility line. FreeThrow is<br />
a 1/8" diameter. 100%<br />
polyethylene monofilament<br />
diamond braid<br />
line.<br />
Unique bag features inside pouches with Velcro ® separators<br />
that allow you to store and protect multiple throwlines and<br />
weights in one bag. There are four interior rings to manage<br />
throwline ends. This bag has a 12" diameter and is 8" tall with<br />
two exterior pockets for further storage.<br />
B1AB0807165<br />
Throwline Storage Bags<br />
Conveniently store and protect<br />
throwlines and weights. Drawstring<br />
allows for quick and easy access.<br />
The bags have interior rings to<br />
secure running end of the throwline<br />
and exterior rings to secure the bag<br />
to a rope, saddle, etc. Rings are<br />
nickel-plated to help prevent rusting.<br />
4" diameter x 9" high<br />
B1AB0807140 Small Red<br />
7" diameter x 9" high<br />
B1AB0897142 Medium Blue<br />
9" diameter x 12" high<br />
B1AB0807141 Large Orange<br />
REGULATION ANSI Z133.1-2006 (8.1.13). All load-bearing<br />
components of the climbing system shall meet the minimum standards<br />
for arborist climbing equipment. (Copyright International Society of<br />
FreeThrow<br />
B1AB025 150'<br />
B1AB030 200'<br />
B1AB026 1000'<br />
Arboriculture. Used with permission.)<br />
Accessories<br />
12 ROPES | ACCESSORIES<br />
<strong>Rope</strong>s
Weaver Throw Weights<br />
Weaver’s new Cordura ® Throw Weights are their strongest yet. Cordura ® is a highperformance<br />
fabric resistant to abrasions, tears, and scuffs and is twice as durable<br />
as standard nylon. In addition to the Cordura ® exterior, Weaver has coated the #8<br />
shot to protect it from moisture and wrapped it in a balloon to keep the shot encapsulated<br />
and compacted for better trajectories. The new D-ring at the top of the bag<br />
is nickel-plated die-cast zinc to prevent rusting. Available in traditional single color<br />
and new two-color bags with bottom loop and redesigned aerodynamic design.<br />
(Cordura ® is a registered trademark for durable fabrics.)<br />
Cordura ® 2-Color Design<br />
These premium Cordura ® throw weights<br />
from Weaver have a new aerodynamic<br />
design to go along with the highly visible<br />
2-color cover. There is a loop on the bottom<br />
of the weight to attach an accessory<br />
carabiner. The nickel-plated D-ring<br />
prevents rusting.<br />
Cordura ® 2-Color<br />
B1AB2006 6 oz. Purple/Black<br />
B1AB2008 8 oz. Lime Green/Black<br />
B1AB2010 10 oz. Blue/Black<br />
Cordura ® 1-Color Design<br />
These Cordura ® weights from Weaver<br />
have the same popular design as our<br />
vinyl bags. They also come in bright<br />
colors and have a nickel-plated stainless<br />
steel ring to prevent rusting.<br />
Cordura ® 1-Color<br />
B1AB1006 6 oz. Purple<br />
B1AB1008 8 oz. Lime Green<br />
B1AB1010 10 oz. Blue<br />
B1AB1012 12 oz. Red<br />
B1AB1014 14 oz. Orange<br />
B1AB1016 16 oz. Yellow<br />
FreeThrow Combos<br />
Buy our most popular throw weight and line combinations and save even<br />
more! All of our combos come with a Weaver Throw Weight and<br />
150' of FreeThrow.<br />
COMBO Size/Material 6 oz. 8 oz. 10 oz. 12 oz. 14 oz. 16 oz.<br />
Throw Weight<br />
FreeThrow<br />
Throw Weight<br />
FreeThrow<br />
Storage Bag<br />
Throw Weight<br />
FreeThrow<br />
Storage Bag<br />
BIGshot<br />
Cordura ® 1-Color B1AB1006C B1AB1008C B1AB1010C B1AB1012C B1AB1014C B1AB1016C<br />
Cordura ® 1-Color B1AB1006CB B1AB1008CB B1AB1010CB B1AB1012CB B1AB1014CB B1AB1016CB<br />
Cordura ® 1-Color B1AB1106CB B1AB1108CB B1AB1110CB B1AB1112CB B1AB1114CB B1AB1116CB<br />
ROPES | ACCESSORIES<br />
13
Arbormaster ® Friction Savers<br />
Buckingham’s Friction Saver is the only product of its kind to<br />
have a patent and the ArborMaster ® name. This product has<br />
been redesigned to make installation and retrieval from the<br />
ground easier. In addition, the large diameter cross-section<br />
Friction Saver minimizes friction by limiting the sharp bend in<br />
your climbing line. This makes climbing easier, reduces premature<br />
wear to your climbing line, and eliminates damage to the<br />
cambium caused by excess friction. It offers minimal friction when<br />
working from different positions in the tree and can be wrapped<br />
around a stem for use as a false crotch where no natural crotch<br />
exists. Rated to 5,000 lbs.<br />
Split Tails<br />
The Split Tail climbing system is gaining popularity among<br />
climbers. Our Split Tails come in lengths from 5' to 6' and are<br />
made from our most popular 1/2" 16-strand Samson and New<br />
England lines.<br />
Factory Spliced Eye<br />
• 1/2" 16-Strand <strong>Rope</strong>s<br />
• Perfect for use in the following: Blake’s Hitch, Tautline Hitch,<br />
Prusik Hitch<br />
16 Strand Split Tail<br />
B1AB1655 Blue Streak Split Tail 60"<br />
B1NESB6ST Safety Blue Split Tail 72"<br />
B1NEHV6ST Hi-Vee Split Tail 72"<br />
B1AB5736<br />
B1AB5760<br />
Arbormaster ® Friction Savers<br />
3 ft.<br />
5 ft.<br />
CMI Micro Pulley<br />
Use a micro pulley and swivel<br />
leash snap to mind your friction<br />
hitch.<br />
B1ABRP110<br />
Swivel Leash Snap<br />
B1AB2232<br />
Eye and Eye Tails<br />
The Eye and Eye system is similar to the<br />
one eye split tail system. This system<br />
offers the climber the benefits of having<br />
both ends attached to the saddle as<br />
well as a balanced hitch that can not<br />
roll out. These Eye and Eye Tails are<br />
made from Samson’s 12-strand Tenex<br />
and Blue Streak.<br />
• Excellent snag and abrasion resistance<br />
• High strength per diameter<br />
• Perfect for use in the following: Distel<br />
Hitch, Schwaebish Hitch, Valdótain Hitch<br />
3/8" Tenex<br />
B1T34ST 34"<br />
Add a carabiner to create your own hip prusik. Carabiners sold<br />
separately (page 36)<br />
1/2" Blue Streak<br />
B1BS5026ST 26"<br />
14 ROPES | ACCESSORIES
Positioning Saddles. Selecting the correct<br />
positioning saddle size is very important for optimum comfort<br />
and confidence in the saddle. The following sizing applies to all<br />
our saddles and uses a Dee to Dee<br />
Measurement. (Point A to Point B) to<br />
help determine the correct and best<br />
fitting saddle size by ensuring the<br />
Dees are properly located in front of<br />
the hip bones.<br />
A<br />
B<br />
To get the perfect fit, drop approximately 4" from the top of each hipbone and<br />
measure the distance around the back from hipbone to hipbone using a tape<br />
measure. Add 2" to this measurement. This is the Dee to Dee measurement.<br />
Use the Dee to Dee measurement to find the correct saddle size:<br />
Saddle Size Dee to Dee Measurement Approximate Waist Size<br />
Small 20" 30" - 34"<br />
Medium 22" 34" - 40"<br />
Large 24" 40" - 44"<br />
X-Large 26" 44" - 48"<br />
TO ORDER THE APPROPRIATE SIZE, PLEASE ADD AN S, M, L OR XL TO<br />
THE END OF THE PART NUMBER.<br />
4-Dee Single Thick Cotton Saddles<br />
Four Dees offer more positioning options and help add stability<br />
• Cotton webbing reinforced with nylon provides comfort<br />
and strength<br />
• Chrome brass 200 snap on each side<br />
• 2" nickel-plated ring on each side<br />
• Not intended for fall arrest<br />
Front Back Front Back<br />
Without Straps<br />
1" Neoprene Straps<br />
B1AB0801005<br />
S, M, L, XL<br />
B1AB0801010<br />
S, M, L, XL<br />
Front<br />
Back<br />
B1AB0801034<br />
2" Nylon Straps<br />
S, M, L, XL<br />
Accessories<br />
Saddles
4-Dee Extra Wide Back Saddles<br />
Extra wide back provides extra comfort and support<br />
Extra wide back provides extra comfort and support where it is<br />
needed most.<br />
• Extra wide 6" foam filled waist back<br />
• Floating seat strap for easy positioning<br />
• 5 nylon accessory loops on saddle back<br />
• Chrome brass 200 snap on each side<br />
• 2" nickel-plated ring on each side<br />
• Available in the following configurations: Without leg straps,<br />
1" neoprene leg straps, 2" nylon leg straps<br />
Front<br />
Back<br />
B1AB0801035<br />
1" Neoprene Straps<br />
S, M, L, XL<br />
Front<br />
Back<br />
B1AB0801033<br />
2" Nylon Straps<br />
S, M, L, XL<br />
Weaver Cougar<br />
We are proud to introduce the newest saddle from Weaver<br />
Leather. This saddle combines years of experience in saddle<br />
production with the most innovative designs in modular saddles.<br />
This saddle includes memory foam padding in the back and leg<br />
straps to allow for a custom fit feeling in every saddle. The waist<br />
secures with Weaver’s famous tongue buckle and the leg straps<br />
have secure, quick-connect buckles. There are Dee rings at the<br />
hips and the strongest rope suspension bridge on the marketplace,<br />
perfect for use with our B1ABRP140 pulley from CMI. The<br />
Cougar comes complete with attachment snaps for attaching<br />
our B1AB0807133 ditty bag for easy access to gloves, tools,<br />
accessories, and personal items. The unique design allows easy<br />
one hand access yet still closes to secure belongings in place.<br />
Front<br />
Cougar Wide Back Saddle<br />
B1AB0801075<br />
S, M, L, XL<br />
Ditty Bag<br />
B1AB0807133<br />
Back<br />
SADDLES | ACCESSORIES<br />
17
To get the perfect fit, drop approximately 4" from the top of each hipbone and<br />
measure the distance around the back from hipbone to hipbone using a tape<br />
measure. Add 2" to this<br />
measurement. This is the<br />
Dee to Dee measurement.<br />
Use the Dee to Dee measurement to find the correct saddle size:<br />
Saddle Size Dee to Dee Measurement Approximate Waist Size<br />
Small 20" 30" - 34"<br />
Medium 22" 34" - 40"<br />
Large 24" 40" - 44"<br />
X-Large 26" 44" - 48"<br />
TO ORDER THE APPROPRIATE SIZE, PLEASE ADD AN S, M, L OR XL TO<br />
THE END OF THE PART NUMBER.<br />
Floating Dee Extra Wide Back Saddles<br />
Easily maneuvers with floating Dees<br />
Floating Dees offer freedom of movement along with an extra<br />
wide back for comfort and support.<br />
• Floating Dees provide easy maneuverability<br />
• Reinforced neoprene front strap<br />
• Extra wide 6" foam filled waist back<br />
• 2" wide nylon leg straps for added comfort<br />
• 5 nylon accessory loops on saddle back<br />
• Chrome brass 200 snap on each side<br />
• 2" nickel-plated ring on each side<br />
• Available in the following configurations: 1 Dee, 2 Dee,<br />
2 Dee with foam filled leather lined leg straps<br />
• Not intended for fall arrest<br />
Front<br />
B1AB0801040<br />
Back<br />
Nylon Straps with Floating Dee<br />
S, M, L, XL<br />
Front<br />
Back<br />
B1AB0801041<br />
Nylon Straps with 2 Floating Dees<br />
S, M, L, XL<br />
Front<br />
Back<br />
B1AB0801038<br />
Padded Straps with 2 Floating Dees<br />
S, M, L, XL<br />
Accessories<br />
Saddles
ArborMaster ® Saddle Series<br />
World-class professionals at ArborMaster ® Training worked closely with Buckingham to develop the ultimate<br />
positioning saddles. Buckingham’s ArborMaster ® Tree Saddles are some of the best in the business.<br />
They continually redesign these products to meet the changing demands of the arborist industry.<br />
• Heavier duty accessory snaps with a more reliable spring<br />
• Accessory loops now have nylon binder filler for added strength (not to be used to suspend a chainsaw)<br />
• High strength polymer clips to eliminate the possibility of legs straps loosening while working aloft<br />
• New friction buckle<br />
Master<br />
The Master offers greater comfort and versatility than previous<br />
versions. Buckingham reduced the amount of material in the<br />
groin and repositioned the leg straps to provide the wearer<br />
more comfort while suspended on an overhead line. A firm filler<br />
is used in the backpad for added support. Floating leg pads<br />
allow the user to position them where they are most comfortable.<br />
• Attachment points for overhead suspension<br />
• Work positioning Dee rings<br />
• Polymer clips to prevent leg straps from loosening<br />
• Friction buckle to adjust waist strap<br />
• Multiple accessory loops<br />
• Handsaw snaps<br />
• Chainsaw carabiner loop<br />
• Floating leg pads<br />
• Step in waist belt (Deluxe)<br />
All Buckingham saddles are available in the following sizes<br />
Saddle Size<br />
Approximate Waist Size<br />
Small 28" - 32"<br />
Medium 32" - 36"<br />
Large 36" - 40"<br />
X-Large 40" - 44"<br />
TO ORDER THE APPROPRIATE SIZE, PLEASE ADD AN S, M, L OR XL TO<br />
THE END OF THE PART NUMBER.<br />
ArborMaster ® Deluxe Saddle Series<br />
Drilex liner on Deluxe back pad wicks moisture away from the body.<br />
Quick connect buckle on leg straps<br />
Front<br />
B1AB13902<br />
Master II<br />
S, M, L, XL<br />
Back<br />
This new series from the professionals at Buckingham and<br />
ArborMaster ® emphasize safety, versatility, and comfort for the<br />
professional arborist. Both experience and customer feedback<br />
were used in the development and manufacturing of the newest<br />
generation of the Master, Traverse, and Versatile arborist saddles.<br />
In addition to the features listed above, all Deluxe series saddles<br />
have the following enhancements:<br />
Front<br />
B1AB11290<br />
Deluxe Master<br />
S, M, L, XL<br />
Back<br />
• Drilex ® lined 2-layer back support: one layer for rigidity;<br />
one layer for comfort<br />
• Quick connect buckle leg straps<br />
• New friction buckles are easy to adjust and positive locking<br />
• Two upper and five lower accessory rings<br />
• Three accessory loops<br />
• Rugged and versatile handsaw snaps<br />
• Medium size Dee rings (5,000 lbs.)<br />
• ArborMaster ® Positioning Saddles meet or exceed OSHA,<br />
ANSI (A10.14 Type II) and other regulations<br />
SADDLES | ACCESSORIES<br />
19
Traverse<br />
The Traverse Saddle is similar to a traditional-style saddle but<br />
utilizes two sliding Dee rings for overhead suspension, offering the<br />
user superior lateral movement. Buckingham uses a 6-ply neoprene<br />
impregnated nylon suspension strap for added wear resistance.<br />
The two sliding Dee rings, adjustable center of balance,<br />
and batten seat makes this saddle a favorite among workers.<br />
All Buckingham saddles are available in the following sizes<br />
Saddle Size<br />
Approximate Waist Size<br />
Small 28" - 32"<br />
Medium 32" - 36"<br />
Large 36" - 40"<br />
X-Large 40" - 44"<br />
TO ORDER THE APPROPRIATE SIZE, PLEASE ADD AN S, M, L OR XL TO<br />
THE END OF THE PART NUMBER.<br />
• Two sliding Dee rings for overhead suspension<br />
• Extra firm back pad for support<br />
• Batten seat for comfort/support<br />
• Polymer leg clips to prevent leg straps from loosening up<br />
• Elastic keepers to contain excess strap material<br />
• Multiple accessory loops<br />
• Handsaw snaps<br />
• Chainsaw carabiner loop<br />
• Tongue buckle with multiple adjustment grommets (standard)<br />
• Positive locking friction buckle (Deluxe)<br />
Front Back Front Back<br />
Traverse<br />
Deluxe Traverse<br />
B1AB1392T<br />
S, M, L, XL<br />
B1AB11292<br />
S, M, L, XL<br />
20 SADDLES | ACCESSORIES
Versatile<br />
The Versatile Saddle is exactly what its name implies - versatile. With the addition of<br />
two extra loops, there are even more ways to suspend oneself or tie off. Use double<br />
locking carabiners or rope snaps with any of the seven loops or attach a double locking<br />
carabiner with our B1ABM20R high density roller and use as a sliding Dee ring type<br />
of saddle. The batten seat is comfortable and adjustable to your personal preference.<br />
All Buckingham saddles are available in the<br />
following sizes<br />
Saddle Size<br />
Approximate Waist Size<br />
Small 28" - 32"<br />
Medium 32" - 36"<br />
Large 36" - 40"<br />
X-Large 40" - 44"<br />
• Five attachment loops for overhead<br />
suspension<br />
• Extra form pad for added back support<br />
• Batten seat for superior comfort and<br />
support<br />
• Polymer clips to prevent leg straps from<br />
loosening up<br />
• Elastic keepers to contain excess strap<br />
• Multiple accessory loops<br />
• Handsaw snaps<br />
• Chainsaw carabiner loop<br />
• Tongue buckle with multiple adjustment<br />
grommets (standard)<br />
• Positive locking friction buckle (Deluxe)<br />
TO ORDER THE APPROPRIATE SIZE, PLEASE<br />
ADD AN S, M, L OR XL TO THE END OF THE<br />
PART NUMBER.<br />
Reduce wear and<br />
tear on the suspension<br />
strap while<br />
providing easy,<br />
consistent side to<br />
side movement.<br />
B1ABM20R<br />
Front Back Front Back<br />
Versatile<br />
Deluxe Versatile<br />
B1AB1393T<br />
S, M, L, XL<br />
B1AB11293<br />
S, M, L, XL<br />
Glide<br />
Buckingham and ArborMaster ® developed the Glide saddle with the professional tree climber in mind. Its modular design and ease<br />
of use ensures comfort, ultimate adjustability, versatility and safety. Glide advantages include multiple adjustments to make a custom<br />
fit, the ability to replace worn parts, and a lightweight padded support design. Exceeds ANSI standards.<br />
• Ring assembly and leg straps for better weight distribution and<br />
added durability<br />
• Warp Speed rope suspension bridge<br />
• Accessory snap on right and mini carabiner on left<br />
• Drilex ® liners to wick moisture<br />
• Quick connect buckles with friction bar adjustment<br />
• Three easy to use gear loops<br />
Front<br />
B1AB16902W1<br />
Glide<br />
S, M, L, XL<br />
Back<br />
Ideal for use on<br />
the Glide’s Warp<br />
Speed Suspension<br />
Bridge.<br />
B1ABRP140<br />
Similar to B1AB140<br />
but with the two<br />
independent tie-in<br />
spots.<br />
B1ABRP141<br />
4 Dee Single Thick<br />
Cotton Back Saddles<br />
These saddles are lightweight<br />
in design and economical<br />
without sacrificing quality.<br />
• 4 Dee rings<br />
• 3" single thick cotton webbing<br />
• 1-3/4" nylon reinforced back<br />
and seat<br />
B1AB1383<br />
4 Dee Single Thick<br />
S, M, L, XL<br />
• Accessory snap<br />
• 1-3/4" steel ring<br />
SADDLES | ACCESSORIES<br />
21
Sequoia. Specifically designed for the tree-care industry, Sequoia is constructed from rugged yet lightweight materials and<br />
weighs less than three pounds. The wide waist belt and padded leg loops provide comfort, support, and ventilation. Gated<br />
apositioning rings can be opened to allow easy adjustment, insertion of accessories, and replacement of worn parts.<br />
Front<br />
Back<br />
B1ABP11<br />
B1ABC16<br />
Sequoia: B1ABC69CF0<br />
Secur Shoulder Strap: B1ABC74<br />
Croll Chest Ascender: B1ABC16<br />
Delta Link: B1ABP11<br />
B1ABC74<br />
Aerial Safety Belts<br />
B1AB2202<br />
This aerial belt is designed to provide the user with maximum mobility.<br />
• Premium model<br />
• Floating Dee ring<br />
• 5-1/2" pad and waist strap<br />
• Neoprene impregnated nylon<br />
• Tongue buckle with nine adjustment holes<br />
• ANSI A10.14 Type I<br />
B1AB2202<br />
• Economy model<br />
• Floating Dee ring<br />
• 1-3/4" woven nylon<br />
• 3" wide soft woven pad<br />
• Tongue buckle with seven adjustment<br />
holes<br />
B1AB3852<br />
To order the appropriate size, please add an S, M, L or XL to the end of the part number.<br />
B1AB3852<br />
Centurion Positioning Lanyard<br />
• 1" x 10' w/Centurion Auto-lock, Fall<br />
Rated Snaphook<br />
B1AB3307<br />
ConstructionPlus ® Harnesses<br />
This one-size fits most series and brings the economical quality alternative to the fall protection<br />
harness market. This is an excellent harness for wear under a positioning saddle.<br />
• One sliding steel Dee-ring<br />
center of back<br />
• Parachute mating buckles<br />
on chest and leg straps<br />
• Made of polyester<br />
B1AB5400<br />
• Three Dee-rings: one sliding<br />
steel ring center of back;<br />
one steel ring each hip<br />
• Parachute mating buckles<br />
on chest strap<br />
• Tongue buckles on leg straps<br />
• Made of polyester and nylon<br />
B1AB54002<br />
•NoPac ® Energy Absorbing<br />
Lanyard<br />
• 1" x 6' with Centurion <br />
Auto-lock, fall rated snap hook<br />
B1AB31104<br />
B1AB5400<br />
B1AB54002<br />
B1AB31104<br />
Roofer’s Kit<br />
Kit includes:<br />
• CP+ B1AB5400 Harness<br />
• 5/8" x 50' CP+ Lifeline with attached<br />
rope grab and attached 2' Zorber ® web<br />
lanyard with Centurion Auto-lock,<br />
fall rated snap hook<br />
• Single-use roof anchor with fasteners<br />
• Bucket<br />
• Certified ANSI/CSA<br />
• Meets OSHA requirements for fall arrest<br />
B1ABK5025<br />
22 SADDLES | ACCESSORIES
Saddle Accessories<br />
Accessory Straps<br />
Nylon straps with a half twist help keep<br />
equipment hanging straight.<br />
B1AB0898212<br />
B1AB0898213<br />
B1AB0898211<br />
• 1" wide double box-stitched nylon<br />
webbing<br />
• Heat-sealed ends to prevent fraying<br />
• Welded nickel-plated rings 1-1/2"<br />
diameter<br />
• Non-rust manganese bronze 225 snaps<br />
B1AB0898212<br />
B1AB0898213<br />
B1AB0898211<br />
Accessory Straps<br />
10" with ring<br />
13" with 2" ring<br />
15" with snap<br />
Tool Belt Loops<br />
Conveniently attach small tools to a belt with these tool belt loops.<br />
• 1" wide nylon<br />
• Double box-stitched webbing<br />
• Will fit over belt up to 2" wide<br />
• Ends are heat-sealed to prevent fraying<br />
• 2" nickel-plated ring<br />
• 3-1/2" chrome brass 200 snap<br />
Bungee Chainsaw Strap<br />
Stretches when in use, retracts when<br />
hanging at your side.<br />
B1AB0898217<br />
B1AB0898218<br />
Tool Belt Loops<br />
2" nickel-plated ring<br />
3-1/2" chrome brass snap<br />
• 1-3/16" wide double box-stitched nylon<br />
• Heat-sealed ends to prevent fraying<br />
• Half twist in loop to keep equipment<br />
hanging straight<br />
• 30" long - 45-1/2" when fully extended<br />
• 2" diameter welded nickel ring<br />
• 4-1/4" long non-rust bronze 225 snap<br />
B1AB0898225<br />
Adjustable Chainsaw Lanyards<br />
• Convenient adjustable design<br />
• 1" wide nylon<br />
• Double box-stitched webbing<br />
• Ends are heat-sealed to prevent fraying<br />
• Half twist in loop help keeps equipment<br />
hanging straight<br />
• 2" welded nickel-plated rings<br />
• 49" long with 4-1/4" non-rust manganese<br />
bronze 225 snap<br />
B1AB0898219<br />
Loop End<br />
Adjustable<br />
Chainsaw Lanyards<br />
• Customize your favorite hardware<br />
• Nylon webbing easily adjusts<br />
• Half twist in loop end keeps equipment<br />
hanging straight<br />
• Double box-stitched for added strength<br />
• Ends are heat-sealed to prevent fraying<br />
• Welded nickel-plated ring 2" diameter<br />
• 3/4" x 50" - Blaze Orange<br />
B1AB0898222<br />
SADDLES | ACCESSORIES<br />
23
Patented Tear Away Bungee Chainsaw Lanyard<br />
The Buckingham Tear Away Chainsaw Lanyard with the built-in bungee is designed for safety and convenience. It is constructed with<br />
a tear away safety pack that activates when 200 lbs. of force is applied. This feature eliminates the possibility of the user being<br />
pulled out of a tree if the saw gets hung up on a falling limb. Comes in easy to see Hi-Vis Yellow.<br />
• Tear away safety pack<br />
• 6" loop to half-hitch to saw handle<br />
• Elastic bungee minimizes lanyard<br />
length when not in use<br />
• 1-3/4" steel ring suspends saw when<br />
not in use<br />
• 32" standard length (stretches to 50")<br />
B1AB25Y1250A<br />
• #2 bronze boat snap<br />
B1AB25Y1350A<br />
Chainsaw Lanyard<br />
• 5/16" 16-strand Kernmantle construction<br />
• 36" long with 3-1/2" brass swivel snap<br />
• 10" loop<br />
B1AB601<br />
Tool Holsters<br />
• Slip onto belt to keep<br />
tools handy<br />
• Durable polypropylene construction<br />
• Loop for attachment to belt<br />
• Chap leather chainsaw file holder<br />
• 2" wide pocket for chainsaw wrench<br />
B1AB0897230<br />
Deluxe Tool<br />
Holster<br />
• Slide through belt slots or clip to belt<br />
• Chap leather chainsaw file and<br />
wrench holders<br />
• 3" wide pocket for either a small or<br />
large wedge<br />
B1AB0897231<br />
Buckingham Equipment Tool Bag<br />
A heavy duty equipment bag with a reinforced bottom makes this a popular choice<br />
among arborists. A large inside pocket accommodates miscellaneous parts.<br />
• Heavy duty construction<br />
• Reinforced bottom<br />
• Large inside pocket<br />
• 24" w x 19" h x 11" d<br />
B1AB45331<br />
24 SADDLES | ACCESSORIES<br />
Accessories<br />
Saddles
Buckingham Climbers<br />
BuckLite Titanium<br />
Buckingham has been making climbers since 1896. Since then, materials<br />
have gotten stronger and lighter. The BuckLite Titanium climber<br />
is the result of over 110 years of materials and process improvements.<br />
It is the lightest and strongest climber yet from Buckingham.<br />
They are 11% lighter than traditional steel climbers (1-1/2 lbs. per<br />
pair) and are strong enough to provide years of service. They are<br />
available with 3-1/2" permanent tree gaffs or 2-3/4" replaceable<br />
tree gaffs. Replacement 1-3/4" pole gaffs are sold separately. Replacement gaffs are<br />
screw-style making gaff replacement in the field quick and easy. The BuckLite Titanium is<br />
available as a complete set with padded leather pads and nylon straps or without pads<br />
and straps so that you can build your perfect set.<br />
• Strong and lightweight Titanium<br />
• Lighter than traditional steel climbers by<br />
1-1/2 lbs. per pair<br />
• Contoured shank<br />
• Straight stirrup<br />
• Sleeve adjusts from 16-1/4" to 18-3/4"<br />
• Leather pads and nylon straps<br />
• Rated to 350 lbs. per pair<br />
2-3/4” Replaceable Tree Gaff (Screw type gaff)<br />
B1ABTB93059 Complete set<br />
B1ABTB9309 Climbers only (no pads<br />
or straps)<br />
3-1/2" Permanent Tree Gaff<br />
B1ABTB81429R Complete set<br />
B1ABTB9142R Climbers only (no pads<br />
or straps)<br />
Buckingham Steel<br />
The traditional steel climber is an ideal economical climber. The replaceable gaff climbers<br />
come with the straight shank standard, but are available with a twisted shank to help<br />
reduce chafing for those who have a problem with climbers moving to the back of their<br />
heels. The Buckingham Steel climbers are available with either 3-1/2" permanent tree gaffs<br />
or 2-3/4" replaceable tree gaffs. Replacement pole gaffs are sold separately. Replacement<br />
gaffs are screw-style making gaff replacement in the field quick and easy. This climber is<br />
available as a complete set with padded leather pads and nylon straps or without pads<br />
and straps so that you can build your perfect set.<br />
•Strong steel construction<br />
•Sleeve adjusts from 16-1/4" to 18-3/4"<br />
by 1-1/2 lbs. per pair<br />
• Contoured shank<br />
• Straight stirrup<br />
• Leather pads and nylon straps<br />
• Rated to 350 lbs. per pair<br />
2-3/4" Replaceable Tree Gaff<br />
B1AB93059 Complete set–straight shank<br />
B1AB93059T Complete set–twisted shank<br />
B1AB9309 Climbers only (no pads or<br />
straps)<br />
3-1/2" Permanent Tree Gaff<br />
B1AB81429R Complete set<br />
B1AB9142R Climbers only (no pads<br />
or straps)<br />
26 CLIMBERS<br />
Climbers
Klein Tools<br />
Replaceable Gaff Tree Climbers<br />
Klein manufactures rugged and durable tree climbers that incorporate all of the features<br />
that professional users have found most desirable over the years. These adjustable<br />
climbers have contoured leg irons that help position gaffs securely and steel sleeves that<br />
move in 1/4" increments for maximum comfort and fit. All climbers come with large, cushioned,<br />
high-grade leather climbing pads and Neoprene-impregnated nylon upper and<br />
lower straps for longer lasting life.<br />
•Complete set<br />
•2-3/4" replaceable tree gaff<br />
•Leather pads and nylon straps<br />
Regular<br />
B1AB1907AR Adjusts from 15" - 19"<br />
•Contoured leg irons<br />
•Adjustable sleeves<br />
•Steel split rings<br />
Long<br />
B1AB1907AL Adjusts from 17" - 21"<br />
Climb Right Aluminum<br />
Aluminum Replaceable Gaff Stirrups<br />
Climb Right’s aluminum climbers are manufactured<br />
from aircraft grade aluminum making them<br />
lighter than traditional steel climbers. The 2-5/8"<br />
tree gaffs are made from quenched and tempered<br />
steel leading to a breaking strength of 40,000<br />
pounds. Sleeves are adjustable from 15-3/4" to<br />
18-3/4" to fit a wide variety of users. All these features<br />
result in a lightweight, yet incredibly strong<br />
climber that is manufactured to ASTM F887-97<br />
standards.<br />
•Complete set includes leather pads and neoprene<br />
impregnated nylon straps<br />
•Steel tree gaffs are 2-5/8" long<br />
•Strong lightweight aluminum<br />
•Sleeves adjust from 15-3/4" to 18-3/4"<br />
•Meets all ASTM standards<br />
2-5/8” Replaceable Tree Gaff<br />
B1AB9999 Complete set<br />
CLIMBERS<br />
27
Buckingham Replacement Gaffs and Accessories<br />
Screw Style Replaceable<br />
Tree Gaffs<br />
• 2-3/4" long screw style replacement<br />
tree gaffs<br />
• Fits all BuckLite climbers and new<br />
screw-style steel climbers.<br />
Important! Please check your climbers to see whether<br />
your gaffs are pin-style or screw style before ordering!<br />
B1ABTB9306<br />
Replacement Pole Gaffs<br />
• 1-3/4" long screw style replacement<br />
pole gaffs<br />
• Fits all BuckLite climbers and new<br />
screw-style steel climbers<br />
B1ABTB9206<br />
Gaff Screws<br />
• Black grade 8 gaff screws<br />
B1AB11T<br />
Pin-Style Replaceable Gaffs<br />
• Steel tree gaff<br />
• 2-3/4" long pin style replacement tree<br />
gaffs for old steel climbers<br />
Important! Please check your climbers to see whether<br />
your gaffs are pin-style or screw style before ordering!<br />
B1AB9306<br />
Replacement Pole Gaffs<br />
• Steel pole gaff<br />
• 1-3/4" long spin style replacement pole<br />
gaffs for old steel climbers<br />
B1AB9206<br />
Drive-Lock Pins<br />
•Replacement drivelock<br />
pins<br />
B1AB11<br />
Sleeve Fasteners<br />
• For Buckingham Climbers with sleeve<br />
holes that are not threaded.<br />
Check the sleeve holes on your climbers before ordering.<br />
B1AB9215<br />
Sleeve Fasteners<br />
• For Buckingham Climbers with sleeve<br />
holes that are threaded.<br />
B1AB996<br />
CLIMBING SPURS Climbing spurs provide an efficient means of entering the tree<br />
but are a valid choice only when climbing and working in trees that are to be removed. The<br />
only exception to this is in the event of an emergency to expedite an aerial rescue. These<br />
limitations are due to the potential for causing injury to the tree from wounds left by the<br />
gaffs, or spurs, particularly on thin barked trees. (from The Tree Climber's Companion, 2nd Edition<br />
by Jeff Epson, Copyright 2000 - Used with permission. See page 86 for details)<br />
Split Rings<br />
• 1-1/8" split ring<br />
• Easily attaches to climber stirrup<br />
B1AB9218<br />
Replacement Tree Gaff<br />
• 2-3/4" long<br />
B1AB07<br />
Replacement Pole Gaff<br />
• 1-1/2" long<br />
B1AB72<br />
28 CLIMBERS<br />
Replacement Gaff Screws<br />
• Long (1 each)<br />
B1AB244<br />
• Short (1 each)<br />
B1AB247<br />
Replacement Sleeve Fastener<br />
• Screw with lock washer (set of 4)<br />
B1AB34910<br />
Climb Right Replacement<br />
Tree Gaffs<br />
B1AB120T<br />
Replacement Pole Gaffs<br />
B1AB120P<br />
Climbers
Straps, Pads, Accessories<br />
We carry a wide variety of replacement straps, pads and accessories designed to fit our complete line of climbers (except where<br />
noted). Our manufacturers use the finest materials and the highest caliber of workmanship.<br />
Top Climber<br />
Straps<br />
Neoprene Top Climber<br />
Straps 26"<br />
Leather Split Ring Lower<br />
Climber Straps<br />
• 26" x 1" top grain leather<br />
• Comfortable and pliable<br />
• 10 holes for size adjustment<br />
• Sold in pairs<br />
B1AB0897001<br />
• 26" x 1" neoprene impregnated nylon<br />
• Resist moisture, mildew and rot<br />
• 10 holes for size adjustment<br />
• Sold in pairs<br />
B1AB0898001<br />
• 26" x 1" top grain latigo steer<br />
hide leather<br />
• Split rings allow for greater flexibility<br />
• Sold in pairs<br />
B1AB0897050<br />
Neoprene Split Ring Lower<br />
Climber Straps<br />
Leather L-Shaped Climber Pads<br />
• Foam cushioned comfort for leg and calf<br />
• 1" thick, soft foam liner<br />
• Securely lockstitched for durability<br />
• Sold in pairs<br />
B1AB0897158<br />
• 26" x 1" neoprene<br />
impregnated nylon<br />
• Resist moisture, mildew and rot<br />
• Split rings allow for greater flexibility<br />
• Sold in pairs<br />
B1AB0898050<br />
Gaff Guards<br />
• Velcro ® straps for easy on and off<br />
• Nickel-plated rivets<br />
• Sold in pairs<br />
• One size fits all<br />
B1AB0897100<br />
Leg Strap Padded Covers<br />
• Slide over climbers or 1" wide saddle leg straps for<br />
added comfort<br />
• 1/2" thick foam padding<br />
• 2" wide heavy red webbing and soft brown leather liner<br />
• Two loops secure these covers to climbers or saddle<br />
• 2" wide x 8" long<br />
• Sold in pairs<br />
B1AB0898100<br />
REGULATION OSHA regulation part 1910.268(G)(3)(i) requires that<br />
gaffs be covered when climbers are not in use.<br />
CLIMBERS<br />
29
T-Shaped Climber Pads with Felt Liner<br />
• No tabs - these pads<br />
thread onto straps and<br />
climber shank for extra<br />
stability<br />
• 1/2" thick felt is securely<br />
lockstitched and riveted to<br />
the pad<br />
• Nickel-plated rivets<br />
• Sold in pairs<br />
B1AB0897156<br />
Super Climber Pads<br />
• Extra large 9" x 12" design<br />
• Distributes pressure evenly<br />
for comfort<br />
• Weather-resistant top grain<br />
steer hide<br />
• 1/2" thick felt back<br />
• Tunnel for climber shank and<br />
1-1/4" slots for straps<br />
• Requires two 26" straps<br />
• Sold in pairs<br />
B1AB0897157<br />
Velcro ® Cushion Wrap Pads<br />
These pads from Buckingham are easy to put on and more comfortable<br />
than conventional climber pads. They are a 4" wide<br />
and have a generous 3/4" of padding. The rolled edge prevents<br />
chafing and the stitched tunnel provides a secure fit. They are<br />
available with or without cinch loops and with or without metal<br />
inserts. The metal insert is designed to keep the climber shank<br />
stationary and reduce chafing to the leg. Fits Buckingham,<br />
Bashlin, and Klein* climbers.<br />
*Pads with metal inserts do not fit Klein climbers.<br />
• For straight stirrup<br />
• Metal insert<br />
• Cinch loop<br />
• For angled stirrup<br />
• Metal insert<br />
• No cinch loop<br />
• For angled stirrup<br />
• Metal insert<br />
• Cinch loop<br />
•No metal insert<br />
• Cinch loop<br />
• Fits Klein climbers<br />
B1AB3504C<br />
B1AB3502<br />
B1AB3502C<br />
B1AB3500C<br />
30 CLIMBERS
Lanyards<br />
2-End Lanyards<br />
• 1/2" 3-strand twisted polyester<br />
• Locking snap hook on both ends<br />
• Non-adjustable<br />
Adjustable<br />
Lanyards<br />
• 1/2" 3-strand polyester<br />
• Locking snap hook each end<br />
• Adjusts 3' to 6'<br />
B1AB3846<br />
2-End Lanyards<br />
B1AB3833 3'<br />
B1AB3834 4'<br />
B1AB3835 5'<br />
B1AB3836 6'<br />
B1AB3837 10'<br />
• 1/2" double-braid polyester<br />
• Locking snap hook each end<br />
• Adjusts 3' to 6'<br />
B1AB180<br />
• 1/2" double-braid polyester<br />
• Locking snap hook each end<br />
• Adjusts 4' to 9'<br />
B1AB188<br />
2–in–1 Safety Lanyard<br />
The 2–in–1 Safety Lanyard is an upgrade to the adjustable lanyard<br />
in many ways. First, it keeps the prusik on the climbers hip<br />
allowing for easy access at all times. Second, the user has the<br />
ability to adjust the prusik with just one hand making adjustments<br />
much faster and safer. Finally, the third snap hook allows<br />
the climber to stay securely attached to the tree at all times,<br />
even while crossing a limb.<br />
• 1/2" 3-strand twisted polyester<br />
• Locking snap hook each end<br />
• Includes prusik loop<br />
B1AB6890<br />
Hip Prusiks<br />
Add a hip prusik to transform your steel core flipline or traditional<br />
rope lanyard into a 2–in–1 Safety Lanyard.<br />
• 3/8" 12-strand Samthane coated Tenex<br />
• 24" long for extra wraps<br />
• Locking snap hook rated to 5,000 lbs.<br />
• 15/16" gate opening<br />
B1T24STS<br />
B1T24STS<br />
• 1/2" 3-strand twisted nylon<br />
• 20" long<br />
• Locking snap hook<br />
B1AB6950<br />
B1AB6950<br />
32 HARDWARE<br />
Hardware
Fliplines<br />
Fliplines are yet another improvement over the traditional rope lanyard. Our fliplines have a locking snap on one end and a fixed<br />
eye on the other. Used in combination with the a twisted clevis and mechanical ascender, the climber can easily tighten the slack<br />
in the line with one hand while climbing. Our fliplines are available in 1/2" 16-strand Hi-Vee line from New England <strong>Rope</strong>s and 1/2"<br />
and 5/8" Steel Core from Pelican <strong>Rope</strong> Works. These fliplines are designed to meet the demands of any professional arborist.<br />
Hi-Vee Flipline<br />
Braided Safety Blue is the premier offering from New England<br />
<strong>Rope</strong>s. It is designed to stay round and firm while providing an<br />
important indicator for retiring if the cover becomes abraded or<br />
cut. The construction significantly reduces weight without compromising<br />
firmness and roundness while maintaining excellent durability<br />
and grip. Cover yarns are treated with a special formula<br />
that enhances abrasion resistance and extends service life.<br />
B1ABB54<br />
B1ABG3S<br />
• 1/2" 16-strand Braided Safety Blue Hi-Vee<br />
• Blue safety core acts as a wear and damage indicator warning<br />
• Abrasion resistant<br />
• Extended useful life<br />
• Locking snap hook and rubber boot at ends<br />
• Use with Gibbs #3 Ascender (B1ABG3/B1AG3S) or Petzl<br />
(B1ABB53/B1ABB54)<br />
Fliplines<br />
B1ABFL08 8'<br />
B1ABFL10 10'<br />
B1ABFL12 12'<br />
Steel Core Flipline<br />
Pelican <strong>Rope</strong> Works uses a bright, tightly braided 16-strand polyester<br />
cover over flexible heavy-duty galvanized aircraft cable.<br />
Available in 1/2" and 5/8" diameter.<br />
• Available in 1/2" or 5/8"<br />
• 16-strand polyester polypropylene<br />
composite cover over<br />
galvanized steel aircraft<br />
cable core<br />
• Abrasion resistant<br />
• Extended useful life<br />
• Locking snap hook and<br />
galvanized thimble at ends<br />
Fliplines<br />
B1AB1306 1/2" x 6'<br />
B1AB1308 1/2" x 8'<br />
B1AB1310 1/2" x 10'<br />
B1AB1312 1/2" x 12'<br />
Use with Gibbs #3 Ascender (B1ABG3/B1AG3S) or Petzl (B1ABB53/B1ABB54)<br />
Fliplines<br />
B1AB306 5/8" x 6'<br />
B1AB308 5/8" x 8'<br />
B1AB310 5/8" x 10'<br />
B1AB312 5/8" x 12'<br />
Use with Gibbs #4 Ascender (B1ABG4/B1ABG4S) or Petzl (B1ABB52/B1ABG45)<br />
HARDWARE<br />
33
<strong>Rope</strong> Clamps<br />
Mini Cam-loaded <strong>Rope</strong> Clamps/Ascenders<br />
Cam-loaded rope clamps are mainly used in hauling systems and to build adjustable lanyards. Cam-loaded clamps apply the load<br />
directly to the cam so that they will engage even if the rope is muddy, wet or icy. We carry them in a number of sizes and materials<br />
with both fixed and removable cams so that you can construct the ultimate flipline perfectly suited to your needs.<br />
Gibbs Ascenders<br />
Strength and durability along with a proven record of operation<br />
under all conditions make Gibbs ascenders some of the best in<br />
the industry. They come in two sizes and are available in lightweight<br />
aluminum or stainless steel for extra wear. All four Gibbs<br />
ascenders have a tensile strength of over 5,000 lbs. meaning that<br />
your rope will break before your ascender does. Arrows on the<br />
clamp ensure accurate installation every time.<br />
• Cam-loaded<br />
• Non slip<br />
• Aluminum or stainless steel<br />
• Available for ropes from 7/16" to 3/4"<br />
• Quick release pins for easy installation and removal<br />
Petzl Ascenders<br />
Petzl rope clamps come in two sizes and are available with<br />
either a removable axle or fixed axle. The removable spindles on<br />
the Microcender and Macrocender offer easy installation anywhere<br />
on the rope and easy removal for use in other tasks. The<br />
locking pin and axle are attached to the body of the clamp to<br />
prevent loss. The axle on the Micrograb and Macrograb is bolted<br />
to the device to prevent involuntary removal. To install this rope<br />
clamp, the rope must be passed through<br />
the device from one of the ends.<br />
• Cam-loaded<br />
• Available for ropes from 7/16" to 3/4"<br />
• Available with quick release pins or fixed axle bolt<br />
B1ABG3S<br />
B1ABG4<br />
B1ABB53<br />
B1ABB54<br />
Gibbs<br />
Gibbs #3<br />
B1ABG3 7/16" - 1/2" rope Aluminum<br />
B1ABG3S<br />
Stainless Steel<br />
Gibbs #4<br />
B1ABG4 5/8" - 3/4" rope Aluminum<br />
B1ABG4S<br />
Stainless Steel<br />
B1ABB52<br />
B1ABG45<br />
Twisted Clevis<br />
These locking twisted shackles are ideal for attaching directly to<br />
your rope clamp. When the twisted clevis is used between your<br />
rope clamp and your saddle, it holds the clamp parallel to the<br />
direction of the rope allowing for quick and easy one-handed<br />
tightening of your flipline.<br />
Ascenders<br />
Micrograb<br />
B1ABB53 7/16" - 1/2" rope Fixed cam axle<br />
Macrograb<br />
B1ABB52 5/8" - 3/4" rope Fixed cam axle<br />
Microcender<br />
B1ABB54 7/16" - 1/2" rope Quick-release cam<br />
Macrocender<br />
B1ABG45 5/8" - 3/4" rope Quick-release cam<br />
Twisted Clevis<br />
B1ABK1610 6600 lbs. tensile 5/16"<br />
B1ABK1612 11465 lbs. tensile 3/8"<br />
34 HARDWARE<br />
Hardware
Grillon Hook<br />
The Grillon (pronounced gree-yawn) is the most advanced positioning lanyard that we<br />
have. Like traditional rope clamps and ascenders, this device allows the climber to<br />
take up slack quickly and easily with one hand. The breakthrough is that it allows the<br />
climber to release the line in a controlled manner, even under tension. This self-braking<br />
descender has a pivoting cam that feeds the lanyard as necessary, but grips when<br />
a load is applied. In addition, there is a handle that allows a controlled release of line<br />
even under tension. Not to be used on wire core lines.<br />
• Pivoting cam acts as both rope<br />
grab and descender<br />
• Locks under tension<br />
• Handle for controlled release,<br />
even under tension<br />
• Sliding protective sheaths protects<br />
contact points on rope<br />
• Sewn splices have a clean finish<br />
• Plastic sheath on splices hold the<br />
connectors in place<br />
• Generous 9' length<br />
• Locking snap hook one end fixed<br />
splice at the other<br />
• Requires one carabiner (not included)<br />
B1ABL523H<br />
Positioning Straps<br />
Buckingham Woven<br />
Nylon Strap<br />
• 1-3/4" woven nylon<br />
• Extremely pliable<br />
• Center layers contrasting color for<br />
visual indicator of excess wear<br />
• Friction buckle for easy adjustment<br />
• Locking snap hook rated to<br />
5,000 lbs.<br />
B1AB496099E 4' - 6'<br />
B1AB497099E 4' - 7'<br />
Buckingham Nybuck Strap<br />
• 1-3/4" nylon filament impregnated<br />
with neoprene (Nybuck)<br />
• Edges permanently sealed to<br />
prevent moisture penetration<br />
• Center layers contrasting color for<br />
visual indicator of excess wear<br />
• Tongue buckle for maximum security<br />
• Locking snap hook rated to<br />
5,000 lbs.<br />
B1AB386099E 4' - 6'<br />
B1AB388099E 4' - 8'<br />
Centurion Positioning<br />
Lanyard<br />
• 1" x 10' woven nylon<br />
• Locking snaps rated to 5,000 lbs.<br />
• Fall arrest protection up to 1,800 lbs.<br />
of force<br />
• Complies with ANSI A10.32-2004<br />
B1AB3307<br />
REGULATION ANSI Z133.1-2006 (8.1.18) - Arborists shall have available a climbing<br />
line and at least one other means of being secured while working aloft; for example, an<br />
arborist climbing line and a work positioning lanyard.<br />
(Copyright International Society of Arboriculture. Used with permission.)<br />
HARDWARE<br />
35
Climbing Carabiners<br />
The carabiners and attachment tools listed in this section meet ANSI Z133.1 standards<br />
for climbing or life support. These tools are extremely useful for other tasks including<br />
light-duty rigging, tool attachment and storage, line redirection, and many others.<br />
Am'D<br />
• Ball lock<br />
• Tensile: 6295 lbs. (28 kN)<br />
• Gate opening: 15/16"<br />
• Material: Aluminum<br />
• ANSI/CE<br />
B1ABM18<br />
Am'D<br />
• Triact lock<br />
• Tensile: 6295 lbs. (28 kN)<br />
• Gate opening: 15/16"<br />
• Material: Aluminum<br />
• ANSI/CE<br />
B1ABM34TL<br />
High Density Roller<br />
This high density roller is designed<br />
for use with our Weaver Floating<br />
Dee and Buckingham Versatile and<br />
Traverse saddles. It eliminates virtually<br />
all wear and tear on the suspension<br />
strap while providing easier<br />
and more consistent side to side<br />
movement. Constructed of nearly<br />
indestructible polyethylene, it is an<br />
invaluable addition to any arborist's<br />
tool kit. It is 2" wide and 1-1/2" in<br />
diameter making it a perfect fit for<br />
the Petzl William carabiners. Roller<br />
only - carabiner not included.<br />
B1ABM20R<br />
William<br />
• Ball lock<br />
• Tensile: 5620 lbs. (25 kN)<br />
• Gate opening: 7/8"<br />
• Material: Aluminum<br />
• ANSI/CE<br />
B1ABM25<br />
Rock<br />
Exotica<br />
• Auto lock<br />
• Tensile: 8992 lbs. (40 kN)<br />
• Gate opening: 1"<br />
• Material: Stainless steel<br />
• ANSI<br />
• NFPA<br />
B1ABM32<br />
William<br />
• Triact lock<br />
• Tensile: 5620 lbs. (25 kN)<br />
• Gate opening: 13/16"<br />
• Material: Aluminum<br />
• ANSI/CE<br />
B1ABM36TL<br />
Kador<br />
• Triact lock<br />
• Tensile: 8992 lbs. (40 kN)<br />
• Gate opening: 13/16"<br />
• Material: Steel<br />
• ANSI/CE<br />
B1AB21002<br />
REGULATION ANSI Z133.1-2006<br />
(8.1.11) - Carabiners used in climbing<br />
shall be self-closing and self-locking,<br />
with a minimum tensile strength of<br />
5,000 pounds (22.24 kN). Carabiners<br />
shall be designed to release the load by<br />
requiring at least two consecutive,<br />
deliberate actions to prepare the gate<br />
for opening.<br />
(Copyright International Society of Arboriculture.<br />
Used with permission.)<br />
36 HARDWARE<br />
Hardware
Rescue<br />
Aluminum<br />
• Kong<br />
• Twist lock<br />
• Tensile: 6744 lbs. (30 kN)<br />
• Gate opening: 1-1/16"<br />
• Material: Aluminum<br />
• ANSI/CE<br />
B1AB912<br />
Rescue<br />
Steel<br />
• Kong<br />
• Twist lock<br />
• Tensile: 11240 lbs. (50 kN)<br />
• Gate opening: 1-1/16"<br />
• Material: Stainless steel<br />
• ANSI/CE<br />
B1AB412<br />
H.M.S.<br />
• Climb Right<br />
• Triple lock<br />
• Tensile: 5620 lbs. (25 kN)<br />
• Gate opening: 7/8"<br />
• Material: Aluminum<br />
• ANSI<br />
B1AB85221<br />
Fixed Eye<br />
• Climb Right<br />
• Triple lock<br />
• Tensile: 5620 lbs. (25 kN)<br />
• Gate opening: 7/8"<br />
• Material: Aluminum<br />
• ANSI<br />
B1AB85221<br />
Triple D<br />
• Climb Right<br />
• Triple lock<br />
•Tensile: 6070 lbs. (27 kN)<br />
• Gate opening: 7/8"<br />
• Material: Aluminum<br />
• ANSI<br />
B1AB85250<br />
HARDWARE<br />
37
Accessory Carabiners and Attachment Tools<br />
The carabiners and attachment tools listed in this section do not meet ANSI Z133.1 standards for climbing or life support. These tools<br />
are extremely useful for other tasks including light-duty rigging, tool attachment and storage, line redirection, and many others.<br />
Am'D<br />
• Petzl<br />
• Screw lock<br />
• Tensile: 6295 lbs. (28 kN)<br />
• Gate opening: 1"<br />
• Material: Aluminum<br />
•CE<br />
B1ABM34SL<br />
William<br />
• Petzl<br />
• Screw lock<br />
• Tensile: 5620 lbs. (25 kN)<br />
• Gate opening: 13/16"<br />
• Material: Aluminum<br />
•CE<br />
B1ABM36SL<br />
Attache<br />
• Petzl<br />
• Screw lock<br />
• Tensile: 5171 lbs. (23 kN)<br />
• Gate opening: 13/16"<br />
• Material: Aluminum<br />
•CE<br />
B1ABM20<br />
Spirit<br />
• Petzl<br />
• Non locking<br />
• Tensile: 5171 lbs. (23 kN)<br />
• Gate opening: 13/16"<br />
• Material: Aluminum<br />
•CE<br />
B1ABM15<br />
Caritool<br />
• Petzl<br />
• Non locking<br />
• Tensile: 11 lbs.<br />
• Gate opening: 3/4"<br />
• Material: Plastic<br />
B1ABP42<br />
B1ABP42L - Large<br />
Paddle<br />
• Kong<br />
• Non locking<br />
• Tensile: 5000 lbs. (22.3 kN)<br />
• Gate opening: 1-1/4"<br />
• Material: Aluminum<br />
•CE<br />
B1AB266<br />
Paddle Wire<br />
• Kong<br />
• Non locking<br />
• Tensile: 5000 lbs. (22.3 kN)<br />
• Gate opening: 1-1/4"<br />
• Material: Aluminum<br />
•CE<br />
B1AB901<br />
Speed Line<br />
• Kong<br />
• Non locking<br />
• Tensile: 5395 lbs. (24 kN)<br />
• Gate opening: 1-1/16"<br />
• Material: Stainless steel<br />
•CE<br />
B1AB563<br />
38 HARDWARE<br />
Hardware
Rescue Steel<br />
• Kong<br />
• Screw Lock<br />
• Tensile: 11240 lbs. (50 kN)<br />
• Gate opening: 1"<br />
• Material: Stainless steel<br />
•CE<br />
B1AB411<br />
Delta<br />
• Petzl<br />
• Screw Lock<br />
• Tensile: 5620 lbs. (25 kN)<br />
• Gate opening: 7/16"<br />
• Material: Stainless steel<br />
•CE<br />
B1ABP11<br />
Quick Link<br />
• Screw lock<br />
• WLL: 1200 lbs (5.3 kN)<br />
• Gate opening: 3/16"<br />
• Material: Stainless steel<br />
B1ABQL06<br />
Quick Link<br />
• Screw lock<br />
• WLL: 2400 lbs. (10.6 kN<br />
• Gate opening: 5/16"<br />
• Material: Stainless steel<br />
B1ABQL10<br />
Locking Twist Clevis (small)<br />
• Tensile: 13800 lbs.<br />
• Gate opening: 5/8"<br />
• Material: Stainless steel<br />
B1ABK1610<br />
Locking Twist Clevis (large)<br />
• Tensile: 20000 lbs.<br />
• Gate opening: 13/16"<br />
• Material: Stainless steel<br />
B1ABK1612<br />
Petzl Swivel<br />
With the addition of this handy accessory from Petzl, your line will never get twisted<br />
again. The Swivel's sealed ball bearings and meticulous design make this a valuable<br />
addition for any climber. The swivel is available in two sizes. The large swivel can be<br />
used in light duty rigging applications.<br />
Swivel Dog Leash Snap<br />
• Tensile: 500 lbs. (2.2 kN)<br />
• Material: Bronze<br />
B1AB2232<br />
• Small<br />
• Tensile: 5000 lbs<br />
(23 kN)<br />
•CE<br />
B1ABP58S<br />
• Large<br />
• Tensile: 8000 lbs.<br />
(36 kN)<br />
•CE<br />
• NFPA<br />
B1ABP58L<br />
HARDWARE<br />
39
Snap Hooks<br />
Locking Snap Hook<br />
• Forged aluminum<br />
• Tensile: 7000 lbs. (31 kN)<br />
• Gate opening: 7/8"<br />
• ANSI<br />
• NFPA<br />
B1ABHW105<br />
Locking Snap Hook<br />
• Forged alloy steel<br />
• Tensile: 5000 lbs. (22.24 kN)<br />
• Gate opening: 3/4"<br />
• ANSI<br />
B1AB1703<br />
Locking Swivel Snap Hook<br />
• Forged alloy steel<br />
• Tensile: 5000 lbs. (22.24 kN)<br />
• Gate Opening: 3/4"<br />
• ANSI<br />
B1AB3154<br />
Locking Spreader Butterfly Hook<br />
• Zinc coated<br />
• Forged alloy steel<br />
• Tensile: 5000 lbs. (22.24 kN)<br />
• Gate Opening: 3/4"<br />
• ANSI<br />
REGULATION ANSI Z133.1-2006 (8.1.10) - Snap hooks (rope snaps)<br />
used in climbing shall be self-closing and self-locking, with a minimum<br />
tensile strength of 5,000 pounds (22.42 kN).<br />
(Copyright International Society of Arboriculture. Used with permission.)<br />
B1AB3032
Ascenders are one way rope clamps. We offer two types of ascenders: frame-loaded rope clamps and cam-loaded rope<br />
clamps. Frame-loaded clamps are most commonly used for climbing while cam-loaded clamps are used for light-duty rigging and<br />
building adjustable lanyards (see page 34 for more information).<br />
Climbing Ascenders are specifically designed for climbing rope. They are easy-to-use and the spring loaded catch allows onehanded<br />
installation and removal at any point on the rope. Each of these ascenders are ergonomically designed and created for a<br />
specific use.<br />
Petzl Ascension<br />
This hand-held ascender has an ergonomically designed handle<br />
that is contoured and coated with thermal insulation. Ascension<br />
is specifically designed for use with our B1ABC49 FootPro.<br />
Simply use the Speedy quick link that comes with the FootPro.<br />
Additional holes can be used to attach lanyards and carabiners<br />
for self-belaying. Available in left and right-handed versions. For<br />
use with single ropes 3/8" to 1/2" (8mm - 13mm) in diameter.<br />
B1AB17L Left Gold<br />
B1AB17R Right Blue<br />
Petzl Croll<br />
Croll is a chest-mounted rope clamp<br />
designed to be used with the<br />
Ascension (B1AB17) for climbing. It is<br />
engineered to lay flat against the<br />
chest when clipped in. The catch is<br />
shaped to facilitate installation and<br />
removal of rope while the Croll is<br />
already attached to the climber. For<br />
use with single ropes 3/8" to 1/2"<br />
(8mm - 13mm) in diameter.<br />
B1ABC16<br />
Petzl FootPro<br />
When used in conjunction with a hand-held ascender,<br />
the FootPro can save the climber considerable<br />
amounts of energy and effort. Simply attach<br />
the included Speedy quick link to the hand-held<br />
ascender and save your strength for working in the<br />
canopy rather than working to get to the canopy.<br />
B1ABC49<br />
B1AB17L<br />
B1AB17R<br />
Petzl Pantin<br />
This foot-mounted rope clamp, used in conjunction with the Croll<br />
and Ascension, completes the Petzl personal climbing system.<br />
The Pantin makes climbing faster, easier, and less tiring. It’s<br />
DoubleBack buckle and Dyneema reinforced strap make this<br />
ascender easy to put on and incredibly durable. It can be<br />
removed from the rope with a simple twist of the leg. The Pantin<br />
is for the right foot only and is<br />
not PPE. For use with single<br />
ropes 3/8" to 1/2" (8mm -<br />
13mm) in diameter.<br />
Kong Twin<br />
• Twin ascender for double rope<br />
techniques<br />
B1B02<br />
B1ABK874<br />
Adjustable Lanyard Clamps are mainly used in hauling systems and to build adjustable lanyards. Cam-loaded clamps apply<br />
the load directly to the cam so that they will engage even if the rope is muddy, wet or icy. We carry them in a number of sizes and<br />
materials with both fixed and removable cams so that you can construct the ultimate flipline perfectly suited to your needs.<br />
Gibbs<br />
Gibbs #3<br />
B1ABG3 7/16" - 1/2" <strong>Rope</strong> Aluminum<br />
B1ABG3S<br />
Stainless Steel<br />
Gibbs #4<br />
B1ABG4 5/8" - 3/4" <strong>Rope</strong> Aluminum<br />
B1ABG4S<br />
Stainless Steel<br />
B1ABG3S<br />
B1ABG4<br />
HARDWARE<br />
41
Adjustable Lanyard Clamps - continued<br />
Petzl<br />
Micrograb<br />
B1ABB53 7/16" - 1/2" <strong>Rope</strong> Fixed cam axle<br />
Macrograb<br />
B1ABB52 5/8" - 3/4" <strong>Rope</strong> Fixed cam axle<br />
Microcender<br />
B1ABB54 7/16" - 1/2" <strong>Rope</strong> Quick-release cam<br />
Macrocender<br />
B1ABG45 5/8" - 3/4" <strong>Rope</strong> Quick-release cam<br />
B1ABB53 B1ABB52 B1ABB54 B1ABG45<br />
Descenders are designed to regulate friction and control descent on a fixed rope. When used as a personal belay device,<br />
they can control the speed of descent. We offer two types of descenders: standard and self-braking. Standard descenders (Straight<br />
8 and Rescue 8) require constant friction to regulate speed. Self-braking descenders (Grigri) provide breaking force when the<br />
handle is not actuated.<br />
The Figure 8 is the simplest descender on the market. With no moving parts, it is easy-to-nstall, use and inspect for wear. Their design<br />
allows for a fast yet controlled descent. Figure 8's may also be used as a belay device when a more appropriate tool is not available.<br />
The Rescue 8 has ears for extra friction on heavier loads and is available in both steel and aluminum (the Straight 8 is available<br />
in aluminum only). Use the aluminum 8's for personal descent and the steel 8's in conjunction with a sling for light-duty rigging.<br />
Straight 8<br />
• Aluminum<br />
• Tensile: 7868 lbs.<br />
(35 kN)<br />
B1AB81805<br />
Rescue 8<br />
• Aluminum<br />
• Tensile: 8992 lbs.<br />
(40 kN)<br />
B1AB802<br />
Rescue 8<br />
• Stainless steel<br />
• Tensile: 11240 lbs.<br />
(50 kN)<br />
B1AB462<br />
Grigri<br />
The Grigri is the future of descenders.<br />
Its self-braking design allows for<br />
comfort and safety when descending<br />
on moving and fixed ropes. The selfbraking<br />
system is designed to allow<br />
the line to run freely through the cam<br />
at controlled speeds. If a shock is<br />
applied to the line, the cam locks<br />
down on the rope. Tension can be<br />
released using the handle. For ropes<br />
3/8" - 7/16" (10mm - 11mm).<br />
B1ABD14<br />
42 HARDWARE<br />
Hardware
Carabiner Reference Chart<br />
Part No. Manuf. Name Lock Material Major Axis Minor Axis Open Gate Gate Opening ANSI<br />
B1ABM18 Petzl Am’D Ball Lock Aluminum 6295 lbs. 28 kN 1574 lbs. 7 kN 1798 lbs. 8 kN 15/16" 24mm Yes Yes<br />
B1ABM34SL Petzl Am’D Screw Lock Aluminum 6295 lbs. 28 kN 1574 lbs. 7 kN 1798 lbs. 8 kN 1" 25mm Yes<br />
B1ABM34TL Petzl Am’D Triact Lock Aluminum 6295 lbs. 28 kN 1798 lbs. 8 kN 1574 lbs. 7 kN 15/16" 24mm Yes Yes<br />
B1ABM25 Petzl William Ball Lock Aluminum 5620 lbs. 25 kN 1574 lbs. 7 kN 1574 lbs. 7 kN 7/8" 22mm Yes Yes<br />
B1ABM36SL Petzl William Screw Lock Aluminum 5620 lbs. 25 kN 1574 lbs. 7 kN 1574 lbs. 7 kN 13/16" 21mm Yes<br />
B1ABM36TL Petzl William Triact Lock Aluminum 5620 lbs. 25 kN 1574 lbs. 7 kN 1574 lbs. 7 kN 13/16" 21mm Yes Yes<br />
B1ABM32 Petzl Rx Auto Lock Steel 8992 lbs. 40 kN 2698 lbs. 12 kN 3147 lbs. 14 kN 1" 25mm Yes<br />
B1ABM20 Petzl Attache Screw Lock Aluminum 5171 lbs. 23 kN 1574 lbs. 7 kN 1349 lbs. 6 kN 13/16" 20mm Yes<br />
B1AB21002 Petzl Kador Triact Lock Steel 8992 lbs. 40 kN 2248 lbs. 10 kN 2698 lbs. 12 kN 13/16" 23.5mm Yes Yes<br />
B1ABM15 Petzl Spirit Non Locking Aluminum 5171 lbs. 23 kN 2248 lbs. 10 kN 2023 lbs. 9.5 kN 13/16" 20mm Yes<br />
B1ABP42 Petzl Caritool Non Locking Plastic 11 lbs. – – – – – 3/4" 19mm<br />
B1ABP11 Petzl Delta Screw Lock Steel 5620 lbs. 25 kN 2248 lbs. 10 kN – – 7/16" 11mm Yes<br />
B1AB266 Kong Paddle Non Locking Aluminum 5000 lbs. 22.3 kN 1798 lbs. 8 kN 1574 lbs. 7 kN 1-1/4" 32mm Yes<br />
B1AB901 Kong Paddle Wire Non Locking Aluminum 5000 lbs. 22.3 kN 1798 lbs. 8 kN 1574 lbs. 7 kN 1-1/4" 32mm Yes<br />
B1AB563 Kong Speed Line Non Locking Steel 5395 lbs. 24 kN 1574 lbs. 7 kN 1798 lbs. 8 kN 1-1/16" 27mm Yes<br />
B1AB912 Kong Rescue Aluminum Twist Lock Aluminum 6744 lbs. 30 kN 2023 lbs. 9 kN 2023 lbs. 9 kN 1-1/16" 27mm Yes Yes<br />
B1AB411 Kong Rescue Steel Screw Lock Steel 11240 lbs. 50 kN 2923 lbs. 13 kN 4496 lbs. 20 kN 1" 27mm Yes<br />
B1AB412 Kong Rescue Steel Twist Lock Steel 11240 lbs. 50 kN 2923 lbs. 13 kN – – 1-1/16" 27mm Yes Yes<br />
B1AB962 Kong Rombo Twist Lock Aluminum 5000 lbs. 22.3 kN 1798 lbs. 8 kN – – 15/16" 25mm Yes Yes<br />
B1ABQL06 US Rigging Quick Link Twist Lock Steel 6000 lbs. 26.6 kN – – – – 1/4" 7mm<br />
B1ABQL10 US Rigging Quick Link Twist Lock Steel 12000 lbs. 53.3 kN – – – – 3/8" 10mm<br />
B1AB85221 Climb Right Fixed Eye Triple Lock Aluminum 5620 lbs. 25 kN 1798 lbs. 8 kN 1798 lbs. 8 kN 7/8" 22mm Yes<br />
B1AB85250 Climb Right Triple D Triple Lock Aluminum 6070 lbs. 27 kN 1798 lbs. 8 kN 1798 lbs. 8 kN 7/8" 22mm Yes<br />
REGULATION ANSI Z133.1-2006 (8.1.11) - Carabiners used in climbing shall be self-closing and selflocking,<br />
with a minimum tensile strength of 5,000 pounds (22.24 kN). Carabiners shall be designed to release<br />
the load by requiring at least two consecutive, deliberate actions to prepare the gate for opening.<br />
(Copyright International Society of Arboriculture. Used with permission.)<br />
ANSI refers<br />
to ANSI<br />
Standard<br />
Z133.1-2006
Pulleys<br />
Max <strong>Rope</strong> Sheave<br />
Part No. Tensile (lbs.) WLL (lbs.) Diameter Height Material Sideplate Mechanics Weight (oz.) Manufacturer<br />
B1ABP05 4945 494 1/2" 5/6" Aluminum Aluminum Bushing 3.2 oz. Petzl<br />
B1ABP50 7193 719 1/2" 1-1/2" Aluminum Aluminum Bearings 6.6 oz. Petzl<br />
B1ABRP110 7000 700 1/2" 1-1/4" Aluminum Aluminum Bushing 2.4 oz. CMI<br />
B1ABRP140 7000 700 1/2" 1-1/4" Aluminum Aluminum Bushing 3.2 oz. CMI<br />
B1ABRP141 7000 700 1/2" 1-1/4" Aluminum Aluminum Bushing 3.2 oz. CMI<br />
B1ABRP102 6000 600 5/8" 2-3/8" Aluminum Aluminum Bushing 7.2 oz. CMI<br />
B1ABRP104 8500 850 5/8" 2-3/8" Aluminum Stainless Steel Bearing 10.4 oz. CMI<br />
B1ABRP105 16000 1600 5/8" 3" Aluminum Stainless Steel Bushing 1.35 lbs. CMI<br />
B1ABP60 16000 1600 5/8" 3" Aluminum Stainless Steel Bearing 1.35 lbs. CMI<br />
B1ABP70 16000 1600 5/8" 4" Aluminum Stainless Steel Bushing 1.8 lbs. CMI<br />
B1ABRP124 25000 2500 5/8" 4" Aluminum Stainless Steel Bushing 3.95 lbs. CMI<br />
Warning! Pulleys with aluminum sheaves are not designed for use with wire ropes or cables.<br />
B1ABP05 B1ABP50 B1ABRP110<br />
B1ABRP140<br />
B1ABRP141<br />
B1ABRP102<br />
B1ABRP104<br />
B1ABRP105<br />
B1ABP60<br />
B1ABRP124<br />
B1ABP70<br />
44 HARDWARE<br />
Hardware
Slings<br />
Samson ➤ WHOOPIE SLING<br />
The Whoopie Sling is an adjustable lifting sling with a permanent<br />
eye at one end and an adjustable eye at the other that allows it<br />
to easily adapt to a variety of tasks and loads. The adjustment<br />
allows snug lifting control and minimizes the number of fixed<br />
length slings required. The sling is a braided non-torquing polyester<br />
rope with Samthane coating. This coating provides<br />
increased sling durability. Each sling has a permanent rating tag<br />
attached.<br />
Port-A-Wrap<br />
not included<br />
Sling Permanent Rated Capacity<br />
Material Part No. Diameter Length Eye Size Single Leg Choker Basket<br />
B1ABW462 1/2" 2-1/2' - 4' 5" 2,220 lbs. 1,760 lbs. 4,400 lbs.<br />
B1ABW562 5/8" 3' - 5' 6" 3,200 lbs. 2,560 lbs. 6,400 lbs.<br />
Tenex B1ABW662 3/4" 3-1/2' - 6' 7" 4,200 lbs. 3,380 lbs. 8,400 lbs.<br />
Samson ➤ FIXED EYE<br />
B1AB1062 3/4" 3-1/2' - 10' 7" 4,200 lbs. 3,380 lbs. 8,400 lbs.<br />
B1AB1262 3/4" 3-1/2' - 12' 7" 4,200 lbs. 3,380 lbs. 8,400 lbs.<br />
B1AB1462 3/4" 3-1/2' - 14' 7" 4,200 lbs. 3,380 lbs. 8,400 lbs.<br />
TreeRig slings are everything that you expect from Samson:<br />
strong and tough. The Tenex version is designed for strength<br />
and better conformity to any surface while the Stable Braid is<br />
low-stretch and abrasion resistant, while still maintaining high<br />
strength.<br />
Tenex<br />
Stable Braid<br />
Sling<br />
Material Part No. Diameter Length Eye Size Choker<br />
Tenex B1T5810SL 5/8" 10' 6" 3,800 lbs.<br />
B1T3412SL 3/4" 12' 6" 5,000 lbs.<br />
Stable Braid B1SB5810SL 5/8" 10' 6" 3,300 lbs.<br />
B1SB3414SL 3/4" 14' 6" 4,100 lbs.<br />
Pelican ➤ FIXED EYE<br />
Double-braid/composite construction of polyester cover over<br />
nylon core results in higher tensile strength and better shock load<br />
performance. These slings are urethane coated for abrasion<br />
resistance and have a Cordura ® sleeve spliced into the eye for<br />
added sling life.<br />
Sling<br />
Material Part No. Diameter Length Eye Size Choker<br />
B1AB120 5/8" 10' 8" 2,900 lbs.<br />
Double Braid B1AB140 5/8" 12' 8" 2,900 lbs.<br />
B1AB160 5/8" 14' 8" 2,900 lbs.<br />
B1AB205 3/4" 16' 8" 4,880 lbs.<br />
46 RIGGING | GEAR<br />
Rigging
Weaver ➤ EYE AND EYE<br />
This eye and eye web sling is great for all manner of rigging<br />
work. They are compact, lightweight, and strong. Each sling<br />
comes with its own tag indicating the safe Working Load Limit.<br />
Sling Permanent Rated Capacity<br />
Material Part No. Diameter Length Eye Size Single Leg Choker Basket<br />
B1ABSL30 1" 30" 3" 1,200 lbs. 960 lbs. 2,400 lbs.<br />
Nylon Web B1ABSL40 1" 40" 3" 1,200 lbs. 960 lbs. 2,400 lbs.<br />
B1ABSL62 1" 62" 3" 1,200 lbs. 960 lbs. 2,400 lbs.<br />
Rigging<br />
CMI Stainless Steel Rigging Blocks<br />
These blocks were designed by CMI specifically for use in false<br />
crotch systems to help save wear and tear on bull ropes. The<br />
upper bushing maximizes sling strength and wide sideplates protect<br />
the rope from contact with rough bark. Convenient milled<br />
knobs allow for easy rigging of the upper bushing. Fabricated<br />
from stainless steel and aluminum for lasting durability in outdoor<br />
conditions.<br />
ISC Aluminum Rigging Blocks<br />
These rigging blocks from ISC combine the convenience of a<br />
spring loaded upper pin with a captive bushing, and a lightweight<br />
aluminum design. Simply push and twist the upper pin,<br />
and the cheekplates will swing open. Best of all, the bushing and<br />
pin can not fall out of the block. The sheave and bushing pins are<br />
stainless steel.<br />
5/8" Stainless Steel Block<br />
Capacity Tensile WLL Weight<br />
B1ABRP130 5/8" 28000 lbs. 2800 lbs. 2.3 lbs.<br />
3/4" Stainless Steel Block<br />
Capacity Tensile WLL Weight<br />
B1ABRP131 3/4" 40000 lbs. 4000 lbs. 5.6 lbs.<br />
5/8" Aluminum Block<br />
Capacity Tensile WLL Weight<br />
B1AB5007S 5/8" 22000 lbs. 4400 lbs. 3.5 lbs.<br />
3/4" Aluminum Block<br />
Capacity Tensile WLL Weight<br />
B1AB5007L 3/4" 33000 lbs. 6600 lbs. 5.1 lbs.<br />
False Crotch Block<br />
and Sling<br />
This combination comes with a<br />
16' x 3/4" double-braided rigging<br />
sling with Cordura ® collar<br />
and steel block for 4,880 lbs. of<br />
rigging capability.<br />
B1AB125<br />
Rigging Plate<br />
This lightweight aluminum rigging<br />
plate allows expert arborists to create<br />
multiple anchor systems and<br />
advanced rigging systems while<br />
maintaining easy organization.<br />
Even though it is lightweight, it is<br />
incredibly strong with a tensile<br />
strength of over 6,700 lbs. (30 kN).<br />
B1AB8645<br />
RIGGING | GEAR<br />
47
Slings and Runners<br />
Petzl Anchor Straps<br />
This device can be used as either an anchor strap<br />
or a sling for lifting heavy loads. Made of highstrength<br />
webbing, that is resistant to abrasion. It<br />
is 1-3/4" wide and has a forged steel D-rings at<br />
each end for 7,800 lbs. of strength.<br />
Petzl Anchor Strap<br />
B1ABC42100 40"<br />
B1ABC42150 60"<br />
B1ABC42200 80"<br />
CMI Sewn Runners<br />
CMI doesn't make any wild claims about their sewn runners.<br />
They simply use the best material and have incredibly strong<br />
bar-tacks. All that matters is that your bar-tacks are stronger than<br />
your webbing and CMI's are strong enough to withstand up to<br />
an amazing 6,800 lbs. All runners are 1" wide.<br />
Port-A-Wrap III<br />
The Port-A-Wrap is the strongest, easiest friction lowering device<br />
on the market. Commonly used with one of our Whoopie slings,<br />
this device can lower even the heaviest of trees safely and easily<br />
to the ground. The wide diameter of the centerpiece creates more<br />
surface area for your rope creating even more friction with fewer<br />
wraps. In addition, this design decreases the bend in your line<br />
increasing the lifespan of your line. The Port-A-Wrap is heavy-duty<br />
steel and comes in two sizes accommodating rope up to 3/4" in<br />
diameter. Safe working load of up to 2,000 lbs.<br />
For ropes up to 9/16"<br />
CMI Sewn Runners<br />
B1ABAAS26 26"<br />
B1ABAAS30 30"<br />
B1ABAAS36 36"<br />
B1ABAAS40 40"<br />
B1ABAAS42 42"<br />
B1ABAAS48 48"<br />
B1AB6011<br />
For ropes up to 3/4"<br />
B1AB601L<br />
Rescue 8<br />
With a tensile strength of over<br />
11,000 lbs., our steel Rescue 8<br />
is perfect for light-duty rigging<br />
while working in the canopy. It<br />
is easy to install and lighter<br />
than the Port-A-Wrap.<br />
B1AB462<br />
Maasdam Pow’R-Pull ®<br />
With more than 50 years of experience<br />
making pullers, Maasdam produces one<br />
of the best there is.<br />
CMI Daisy Chain<br />
CMI’s daisy chain can be used to haul numerous items into the<br />
canopy. End-to-end strength is an incredible 6,800 lbs. while individual<br />
loops are rated to 2,900 lbs.<br />
B1ABDC001<br />
• 3/4 ton capacity<br />
• Aluminum alloy ratchet wheel<br />
• High-strength electro-plated<br />
steel parts<br />
• "Notch-at-a-time" letdown<br />
• Drop forged steel hook<br />
• Uses 1/2" 3-strand<br />
twisted rope (rope not<br />
included)<br />
B1ABAO<br />
48<br />
RIGGING | GEAR<br />
Rigging
Silky Saws<br />
Silky Saws are created to meet the requirements of professionals who demand the finest tools for<br />
each and every application. Silky Saws are designed and manufactured to the highest quality<br />
standards currently available. These saws should not be confused with low priced products sold<br />
for occasional, general purpose use. These are premium quality tools for the professional user.<br />
Gomboy<br />
Gomboy is a multi-purpose folding saw with a very smooth cutting<br />
action. This distinctive saw has earned a reputation as the<br />
finest folding saw on the market. Aggressive teeth cut with amazing<br />
speed in green or dry wood. Securely textured rubberpadded<br />
handle and reliable spring-loaded blade lock make<br />
sawing safe and comfortable. Comes with a plastic carrying<br />
case for storage and carrying.<br />
• 8.5 teeth per inch<br />
• 11.8" (300mm) blade<br />
• Chrome-plated, taper<br />
ground blade<br />
• Exceptional strength/balance<br />
• Precision ground, razor sharp<br />
teeth with 4 cutting angles<br />
along their length<br />
• Weighs 0.7 lbs.<br />
Zubat<br />
Zubat is a best-selling professional, heavy-duty, curved blade<br />
hand saw suitable for all pruning tasks and cutting large<br />
branches. A soft, molded-rubber handle holds the high-performance,<br />
curved, fast cutting blade. It fits securely inside a custom<br />
fitted scabbard with detachable belt holder. A curved blade<br />
means greater cutting speed with less effort. The hard chrome<br />
plated blade has over 6 teeth per inch, resists rust and the<br />
effects of tree resin, and easily wipes clean.<br />
• 6.35 teeth per inch<br />
• 13" (330mm) blade<br />
• Chrome-plated, taper<br />
ground blade<br />
• Precision ground, razor sharp<br />
teeth with 4 cutting angles<br />
along their length<br />
• Low effort triple edge,<br />
non-set tooth design<br />
• Heavy-duty, durable pivoting<br />
sheath for the curved blade<br />
• Weighs 1.02 lbs.<br />
B1AB12130<br />
B1AB12230<br />
Gomboy<br />
Folding saw<br />
Replacement blade<br />
Gomtaro<br />
A beautifully balanced straight pruning saw with sheath. When<br />
the cutting gets tough, the Gomtaro gets cutting! Great combination<br />
of high performance blade with a comfortable and<br />
durable sure-grip rubber handle that really sticks in your hands.<br />
Ideal for all pruning tasks.<br />
• 6.77 teeth per inch<br />
• 11.81" (300mm) blade<br />
• Chrome-plated, taper<br />
ground blade<br />
• Precision ground, razor sharp<br />
teeth with 4 cutting angles<br />
along their length<br />
• Low effort triple edge, non-set<br />
tooth design<br />
• Convenient climbing sheath<br />
has a hinged belt loop with<br />
carabiner hole<br />
• Weighs 0.93 lbs.<br />
B1AB27033<br />
B1AB27133<br />
Natanoko<br />
Zubat<br />
Saw with scabbard<br />
Replacement blade<br />
This is a balanced, ultra-durable straight hand saw. Mono construction<br />
gives strength and flexibility to the full length of the<br />
saw. Superbly designed rubber hand-grip encases the blade<br />
extension to absorb vibration while cutting. Ideal for cutting<br />
large branches.<br />
• 6.35 teeth per inch<br />
• 13" (330mm) blade<br />
• Perfectly balanced, rugged,<br />
one piece construction<br />
• Large, precision cut tooth<br />
pattern<br />
• Curved back adds depth and<br />
strength<br />
• Blade can be sharpened<br />
with file<br />
• Weighs 1.25 lbs.<br />
B1AB10230<br />
B1AB10330<br />
Gomtaro<br />
Saw with scabbard<br />
Replacement blade<br />
Natanoko<br />
50 SAWS | PRUNERS<br />
B1AB12933<br />
B1AB13033<br />
Saw with scabbard<br />
Replacement blade
Sugoi<br />
State-of-the-art, must have professional arborist saw with a razorsharp,<br />
ultra-fast, curved blade measuring over 14". Nicknamed<br />
by arborists "Tree Tiger" due to its super aggressive tooth pattern<br />
and yellow-orange tiger stripes on the rubber handle. Ideal<br />
for aggressive cutting and efficient chip removal. A large and<br />
comfortable sure-grip handle gives strength and flexibility to the<br />
full length of the saw. The curved blade increases strength and<br />
performance. Comes with a custom high-visibility plastic scabbard<br />
that can be attached to a belt or lower leg. Ideal for pruning<br />
large limbs on the ground or in the canopy.<br />
• 5.5 teeth per inch<br />
• 14.2" (360mm) blade<br />
• Low effort triple edge, non-set<br />
tooth design<br />
• Precision ground, razor sharp<br />
teeth with 4 cutting angles<br />
along their length<br />
• Chrome-plated blade<br />
• Curved back adds depth<br />
and strength<br />
• Blade can be sharpened<br />
with a file<br />
• Weighs 0.8 lbs.<br />
B1AB39036<br />
B1AB39136<br />
Sugoi<br />
Saw with scabbard<br />
Replacement blade<br />
Ibuki: Saw with Scabbard<br />
Truly professional heavy-duty curved hand saw - Silky‘s alternative<br />
to a chain saw. Ideal for the toughest pruning jobs. Ibuki has<br />
the biggest, thickest and largest toothed blade of all the Silky‘s<br />
saws. The heavy-duty blade is over 15" long; its teeth are<br />
designed to cut on the pull stroke for fast, efficient cutting. Ibuki<br />
is most suitable for pruning large branches and is ideal for<br />
aggressive cutting and efficient chip removal.<br />
• 5.5 teeth per inch<br />
• 15.35" (390mm) blade<br />
• Chrome-plated blade<br />
• Large, precision cut tooth<br />
pattern<br />
• Four rows of teeth for rip-cut,<br />
cross-cut and slant-cut<br />
•Curved back adds depth<br />
and strength<br />
• Blade can be sharpened<br />
with a file<br />
• Weighs 1.1 lbs.<br />
B1AB27539<br />
B1AB27639<br />
Ibuki<br />
Saw with scabbard<br />
Replacement blade<br />
SAWS | PRUNERS<br />
51
Fanno Saws<br />
Fanno Saw Works is a family-owned and operated business, and has been for over 75 years.<br />
Their focus on quality and innovation has taken the Fanno name from the fields of California<br />
to one of the most recognized in the industry today. Each saw is designed for a specific need,<br />
with the professional in mind. Fanno saws are manufactured from the finest materials and with<br />
the best available technology.<br />
6" Folding Saw<br />
19" Lance Tooth Saw<br />
• 6" cutting edge<br />
• 7 Tri-Edge teeth per inch<br />
• Easy-grip plastic handle<br />
• Safety lock closure<br />
• 19" cutting edge<br />
• 5 points per inch with<br />
Lance teeth<br />
• Curved, pull cutting tree saw<br />
designed for close work<br />
• Self-feeding, self-cleaning<br />
tooth design<br />
6" Folding Saw<br />
B1AB91280<br />
Saw<br />
B1AB91487<br />
Leather Sheath<br />
19" Lance Tooth Saw<br />
B1AB20<br />
Saw<br />
13" Tri-Edge Saw<br />
• Fanno's most popular<br />
Tri-Edge saw<br />
• 13" cutting edge<br />
• 6 teeth per inch<br />
• Contoured laminated<br />
hardwood handle<br />
23" Pro-Edge Saw<br />
• 21" cutting edge<br />
• 4.5 points per inch Pro Edge<br />
• Curved, pull cutting tree saw<br />
• Designed for close work<br />
• Self-feeding, self-cleaning<br />
tooth design<br />
B1AB1311<br />
13" Tri-Edge Saw<br />
Saw<br />
B1AB22<br />
23" Pro-Edge<br />
Saw<br />
B1AB135B<br />
Replacement Blade<br />
15" Tri-Edge Saw<br />
• 15" cutting edge<br />
• 5.5 points per inch with Tri-Edge teeth<br />
B1AB17<br />
B1AB17SB<br />
15" Tri-Edge Saw<br />
Saw<br />
Replacement Blade<br />
Pruners<br />
52 SAWS | PRUNERS<br />
Saws
Weaver Scabbards<br />
Weaver Leather scabbards are constructed of top grain steer hide harness leather or durable,<br />
weather-resistant rubberized belting. All scabbards are sewn with heavy weather and mildewresistant<br />
bonded nylon thread and riveted at the stress points. They are designed to be more<br />
convenient as well as give years of service in daily use.<br />
B1AB0802010 B1AB0803010 B1AB0802011 B1AB0803011 B1AB0802012 B1AB0803012 B1AB080300125 B1AB080300127<br />
• Straight back leather<br />
• For saws with blades up<br />
to 14-1/2" long<br />
B1AB0802010<br />
• Curved back leather<br />
• For saws with blades up<br />
to 14-1/2" long<br />
B1AB0802011<br />
• Straight back leather<br />
• For saws with blades up<br />
to 14-1/2" long<br />
B1AB0802012<br />
• Curved back with black<br />
rubberized belting<br />
• Fits saws up to 21-1/2" long<br />
B1AB080300125<br />
• Black rubberized belting<br />
B1AB0803010<br />
• Black rubberized belting<br />
B1AB0803011<br />
• Black rubberized belting<br />
B1AB0803012<br />
• Curved back with black<br />
rubberized belting<br />
• Fits saws up to 24-3/4" long<br />
B1AB080300127<br />
SAWS | PRUNERS<br />
53
Pole Pruner and Saw Combos<br />
Jameson Pole Pruner and Saw Combos<br />
The Jameson Pole Saw and Pruner kit comes with the best of the Jameson product line. Jameson's heavy-duty pruners, are designed<br />
for the professional arborist. They use forged steel components for added strength and durability along with an enhanced spring pin<br />
to reduce bending and breaking. Pole heads are rust resistant, lightweight aluminum and feature a low profile design to maneuver<br />
easily in dense foliage. The saw has the Tri-Edge blade, preferred by arborists. This blade provides a quicker, cleaner cut with less<br />
wear on the blade than traditional single edge blades. Jameson's blades are hard-chrome plated with impulse hardened teeth for<br />
increased wear resistance. Jameson's light duty poles for landscapers are made of the same quality construction as the Jameson Big<br />
Shot poles, but are lighter and slightly more flexible. These sets are available with an 8' single pole or a 6' - 12' telescoping pole.<br />
•8' Landscaping pole<br />
•Pruner head with<br />
rope<br />
•Saw head<br />
•Jameson 13"<br />
Tri-Edge blade<br />
B1PKG8<br />
• 6' - 12' Double Lock<br />
telescoping pole<br />
• Pruner head with rope<br />
• Saw head<br />
• Jameson 13"<br />
Tri-Edge blade<br />
B1PKG12T<br />
Professional Landscaping Tools<br />
Jameson introduced the first<br />
fiberglass poles in 1956 and<br />
continues to set the standard<br />
for innovative tree care and<br />
landscape products.<br />
54 SAWS | PRUNERS
Fred Marvin Pole Pruner and Saw Combos<br />
Marvin pruners are designed to make your job easy. Their powerful blades cut limbs up to 1-1/4" in diameter with ease. The cutting<br />
blade is made from high-grade steel to permit several resharpenings. Marvin Fiberglass poles are lightweight and extremely<br />
durable. The wall thickness is 25% thicker than the average pole to ensure a rigid feel.<br />
• 8' Landscaping pole<br />
• Pruner head with rope<br />
• Saw head<br />
• Marvin 330 Tri-Edge<br />
blade<br />
B1PKG20A<br />
• 6' fiberglass base pole<br />
• 6' fiberglass mid pole<br />
• Pruner head with rope<br />
• Saw head<br />
• Marvin 330 Tri-Edge<br />
blade<br />
B1PKG23<br />
Fred Marvin Telescoping Pruner<br />
• 6' - 12' Telescoping Pole<br />
• Pruner head with rope<br />
B1PKG25<br />
SAWS | PRUNERS<br />
55
Pole Pruner, Saw Parts and Accessories<br />
Razor Tooth (Bi-Cut) Replacement<br />
Blade<br />
B1S19<br />
Quick Change Pruner Head<br />
and Adapter<br />
B1QCP<br />
14' <strong>Rope</strong><br />
B1Z125A<br />
Tri-Edge 330 Replacement Blade<br />
B1S20<br />
Quick Change Saw Head<br />
B1QCS<br />
Saw Head Only<br />
B1U1R<br />
Tri-Edge 330 Replacement Blade<br />
with Hook<br />
B1S21<br />
B16FB<br />
6' Fiberglass Base Pole<br />
B16FM<br />
6' Fiberglass Mid Pole<br />
B16PB<br />
6' Wood Base Pole<br />
B16PM<br />
6' Wood Mid Pole<br />
B18FBJ<br />
8' Jameson Fiberglass Base Pole<br />
B112FTJ<br />
56<br />
6' - 12' Jameson Fiberglass Telescoping Pole<br />
SAWS | PRUNERS<br />
Pruners<br />
Saws
1 Block Bolt Washer & Nut B1Z124<br />
2 Lower Spring Pin B1Z110<br />
3 Spring B1Z104<br />
4 Upper Spring Pin B1Z106<br />
5 Pulley Trunnion Pin B1Z116<br />
6 Steel Rivet B1Z130<br />
7 Pulley Assembly B1Z115<br />
8 Lever (Z-110 attached) B1Z102<br />
10 Blade B1Z101<br />
11 Cap Screw, Washer, Nut B1Z105<br />
13 Link Pin B1Z108<br />
16 Pole Bolt & Nut (PH-4) B1Z117C<br />
SAWS | PRUNERS 57
Fred Marvin Pruners and Loppers<br />
All-Purpose Pruning Shear<br />
• 1" diameter cutting capacity<br />
• Forged steel alloy construction<br />
B1AS08<br />
Marvin Lopper<br />
• 1-3/4" diameter cutting capacity<br />
• 30" overall length<br />
B1LB2030<br />
Professional Heavy-Duty Bypass Lopper<br />
• 2-1/4" diameter cutting capacity<br />
• 32" overall length<br />
B1LB3032<br />
Pruners<br />
58<br />
SAWS | PRUNERS<br />
Saws
Petzl Vertex Vent<br />
The Vertex Vent by Petzl is designed for maximum comfort, customization,<br />
and durability. The five ventilation holes can be<br />
quickly opened and closed with sliding shutters to meet changing<br />
environmental conditions. The polycarbonate shell is lightweight<br />
(16.4 oz.) yet strong enough to meet applicable industry<br />
and mountaineering standards for impact and wear resistance.<br />
The complete and simple three-way adjustment system ensures<br />
a perfect fit for any wearer.<br />
• Vent holes easily open and close<br />
• Strong yet lightweight construction<br />
• Three-way size adjustments<br />
• Comfortable webbing<br />
suspension system<br />
• CE EN 12492<br />
• ANSI Z89.1-2003<br />
• Type I class C<br />
Kong “Magic” Helmets<br />
Kong's Magic helmets are lightweight, comfortable and durable.<br />
This helmet has a rugged polycarbonate shell with adjustable<br />
chin straps and an adjustable headband. Magic helmets are<br />
perfect for climbing and fall protection applications.<br />
• Strong and lightweight<br />
• Comfortable fit<br />
• Easily adjustable<br />
• 14.5 oz.<br />
• CE EN 12492<br />
Kong “Magic“ Helmets<br />
B1KNG997R<br />
B1KNG997W<br />
Red<br />
White<br />
Petzel Vertex Vent<br />
B1ABA02R Red<br />
B1ABA02W White<br />
Safety Cap<br />
ProGuard safety caps are designed for general industry, construction<br />
and utility use. They have a lightweight shell made from<br />
tough polyethylene and an adjustable suspension and soft brow<br />
pad for added comfort. ProGuard caps have 30mm accessory<br />
slots for hearing and face protection products. These caps comply<br />
with relevant ANSI and CE standards. Available in orange,<br />
red and yellow.<br />
• Lightweight and tough<br />
• Pin-lock suspension<br />
• ANSI Z89.1-2003 type I<br />
Safety Cap<br />
B1AC175 Orange<br />
B1AC174<br />
B1AC177<br />
Yellow<br />
Red<br />
• Class E*, G and C<br />
• EN 397, CE 0086<br />
*Tested to 20,000 volts<br />
Forestry Helmet, Visor and Muffs<br />
• Four point ratchet suspension<br />
• Medium profile ear muffs (24 dB NRR)<br />
• Visor bracket<br />
• Steel visor<br />
B1AC172<br />
BrushGuard Visor<br />
and Muffs<br />
• Equalizer SuperSeal muff<br />
(27 dB NRR)<br />
• Nylon mesh visor<br />
B1HB7000<br />
REGULATION ANSI Z87.1-2003 (9.1) - Face shields are protective devices<br />
designed to shield the wearer's face, or portions thereof, in addition to the eyes,<br />
from certain hazards. Face shields shall be worn only in conjunction with spectacles<br />
or goggles. American National Standard for Personal Occupational and<br />
Educational Eye and Face Protection Devices, ANSI Z87.1-2003. (Copyright 2003<br />
International Safety Equipment Association. Used with permission.)<br />
60<br />
SAFETY<br />
Safety
Three Position Ear Muff<br />
• Economical muff with<br />
23 dB NRR.<br />
• Weighs only 4.4 oz.<br />
B1AC169<br />
Ear Muffs with Built In Radio (Rechargeable)<br />
These ear muffs with built-in FM stereo radio offer 25 db NRR.<br />
Electronic controls limit the sound produced inside the headset<br />
to 82 dB, keeping headset at an OSHA mandated safe level. An<br />
auto off switch will turn the headset off after four hours of continuous<br />
use to avoid accidental battery drain. Included charger<br />
gives 40+ hours of use with the overnight charge. Connect your<br />
favorite music player, CD player or communication radio to the<br />
connection port for added use.<br />
• 25 dB NRR<br />
• Noise limited to OSHA limits<br />
• ANSI S3.19-1974<br />
• Rechargeable<br />
B1AC181<br />
Ear Plugs<br />
• Reusable silicone ear plug<br />
• Safety neck cord<br />
B1AC5605<br />
• Reusable foam ear plug<br />
• Safety neck cord<br />
B1AC5604<br />
Ear Muffs with Built In Radio (AA)<br />
This deluxe version of the B1AC181 offers both FM and AM<br />
receivers, better comfort, and better electronics. Improved internal<br />
components offer better reception and station lock. Two AA<br />
batteries will last up to 150 hours. An automatic shut-off switch<br />
will turn these off after four consecutive hours of use to prevent<br />
accidental battery use. 3.5mm input jack has been added in<br />
order to make it possible to listen to auxiliary devices such as<br />
portable music devices, CD players, and communication radios.<br />
• 22 dB NRR<br />
• 27 dB SNR<br />
• Noise limited to<br />
OSHA limits<br />
• ANSI S3.19-1974<br />
• CE EN-352-1:2002<br />
• Requires two AA batteries<br />
B1AC660<br />
SAFETY<br />
61
Chainsaw Chaps<br />
Our ProChaps and ProVest are made with Prolar protective<br />
padding and are essential safety equipment for anyone<br />
using a chainsaw. The Prolar pads have been tested in accordance<br />
with the APA and ASTM standards by Underwriters<br />
Laboratories. This amazing material is capable of jamming a<br />
saw running at 3,000 feet per minute!<br />
• Conform to ASTM and<br />
APA Class A requirements<br />
• Lightweight, flexible and<br />
strong material<br />
• Easy on/easy off apronstyle<br />
design<br />
• Quick release buckles for<br />
waist and legs<br />
• Zippered front pocket<br />
• Blaze Orange<br />
B1AC9034<br />
B1AC9037<br />
B1AC9042<br />
Chainsaw Chaps<br />
33" (waist to bottom)<br />
36" (waist to bottom)<br />
39" (waist to bottom)<br />
Forestry Safety Vest<br />
ProVest is the first genuine chainsaw resistant upper body protection.<br />
It is intended to offer limited protection from chainsaw<br />
kick back injuries. Arborists, landscapers and utility company<br />
employees are potential beneficiaries of this protection.<br />
B1ACJE50M<br />
B1ACJE50L<br />
B1ACJE50XL<br />
Forestry Safety Vest<br />
Medium<br />
Large<br />
Extra Large<br />
REGULATION<br />
ANSI Z133.1-2006 (3.4.8) - Chainsaw-resistant leg protection shall be worn while operating<br />
a chainsaw during ground operations. (Copyright International Society of Arboriculture. Used with permission.)<br />
Shin Guards<br />
• Washable vinyl<br />
• One size fits all<br />
•Easy to put on and<br />
take off<br />
• Protects against light<br />
trimming debris<br />
• NOT intended to replace<br />
cutting protection such<br />
as chainsaw chaps<br />
B1WE8<br />
Loggers First<br />
Aid Kit<br />
Sturdy, resealable<br />
box with hinged<br />
handle. This kit meets<br />
the acceptable<br />
number and type of<br />
first-aid supplies for<br />
first aid kits required by<br />
OSHA 1910.266 Appendix A.<br />
B182065<br />
62<br />
SAFETY<br />
Safety
Safety Glasses<br />
Brigade<br />
Crafted of high-grade nylon material. Ultra light, flexible frame<br />
design for comfort fit. Comfort fit rubber nose piece. Adjustable<br />
temple ends. Lenses provide 99.9% protection from harmful UVA<br />
and UVB rays. Meets and exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG1731 Matte Black Smoke<br />
B1SG17312 Black Soft Touch Gold Revo<br />
B1SG1733 Black/Red Silver Mirror<br />
B1SG1734 Matte Black Clear<br />
Cobra<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. Comfort fit rubber nose piece. Soft non-slip<br />
rubber temple ends. Lenses provide 99.9% protection from harmful<br />
UVA and UVB rays. Meets and exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG15117 Crystal Brown Brown w/ light flash mirror<br />
B1SG1524 Shiny Black Clear<br />
B1SG1528 Matte Black Red Revo<br />
B1SG1541 Black Crystal Smoke<br />
Concept<br />
TR-90 Utraflex, ultra light frame technology. These glasses feature<br />
removable surgical grade foam insert for maximum eye protection.<br />
Comfort fit rubber nose piece. Soft, non-slip rubber temple<br />
ends. Lenses provide 99.9% protection from harmful UVA and<br />
UVB rays. Meets and exceeds ANSI Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG828 Black Matte Blue Revo<br />
B1SG867 Shiny Black Brown Flash Mirror<br />
B1SG873 Orange-Black Flash Mirror<br />
Eclipse<br />
Crafted of high-grade nylon material. Ultra light, flexible frame<br />
design for comfort fit. Comfort fit rubber nose piece. Adjustable<br />
temple ends. Lenses provide 99.9% protection from harmful UVA<br />
and UVB rays. Meets and exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG331 Soft Touch Black Smoke<br />
B1SG3312 Soft Touch Black Gold Revo<br />
B1SG333 Soft Touch Black Silver Mirror<br />
B1SG334 Soft Touch Black Clear<br />
SAFETY 63
Infinity<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. NO-SLIP temple ends. Lenses provide 99.9%<br />
protection from harmful UVA and UVB rays. Meets and exceeds<br />
ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG224 Matte Black Clear<br />
B1SG241 Black Crystal Smoke<br />
B1SG263 Shiny Black Silver Mirror<br />
B1SG2812 Orange/Black Gold Revo<br />
Predator<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. Comfort fit rubber nose piece. Soft non-slip<br />
rubber temple ends. Lenses provide<br />
99.9% protection from harmful UVA<br />
and UVB rays. Meets and exceeds<br />
ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG221 Fog Black Smoke<br />
B1SG229 Fog Black Red Revo<br />
Raptor<br />
EVA FOAM LINED for maximum protection. Ultra light frame<br />
design for comfort fit. Adjustable temple ends. Lenses provide<br />
99.9% protection from harmful UVA<br />
and UVB rays. Meets and exceeds<br />
ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG1124 Fog Black Clear<br />
B1SG1161 Pearl Black Smoke<br />
Shield<br />
Crafted of high-grade polycarbonate material. EVA FOAM LINED<br />
for maximum eye protection. Ultra light frame design for comfort<br />
fit. Lenses provide 99.9% protection from harmful UVA and UVB<br />
rays. Meets and exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG541 Black Crystal Smoke<br />
B1SG546 Black Crystal Brown<br />
B1SG548 Black Crystal Blue Revo<br />
B1SG554 Crystal Clear<br />
Sniper<br />
TR-90 ULTRAFLEX, ultra light frame technology. Comfort fit rubber<br />
nose piece. Soft, non-slip rubber temple ends. Lenses provide<br />
99.9% protection from harmful UVA and UVB rays. Meets and<br />
exceeds ANSI-Z87 + specifications.<br />
Product No. Frames Lens<br />
B1SG9117 Liquid Brown Brown Flash Mirror<br />
B1SG921 Fog Black Smoke<br />
B1SG924 Fog Black Clear<br />
B1SG925 Fog Black Yellow<br />
B1SG969 Shiny Black Red Revo<br />
64<br />
SAFETY
Talon<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. Comfort fit rubber nose piece. Soft non-slip<br />
rubber temple ends. Lenses provide 99.9% protection from harmful<br />
UVA and UVB rays. Meets and exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG119 Orange Red Revo<br />
B1SG121 Black Smoke<br />
B1SG124 Black Clear<br />
B1SG126 Fog Black Brown<br />
Velocity<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. Soft, non-slip rubber temple ends. Lenses<br />
provide 99.9% protection from harmful UVA and UVB rays. Meets<br />
and exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG10117 Crystal Brown Brown w/ light flash mirror<br />
B1SG1021 Matte Black Smoke<br />
B1SG1024 Matte Black Clear<br />
B1SG10410 Crystal Black Green Revo<br />
Viper<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. Adjustable temple ends. Lenses provide<br />
99.9% protection from harmful UVA and UVB rays. Meets and<br />
exceeds ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG741 Crystal Black Smoke<br />
B1SG743 Crystal Black Silver Mirror<br />
B1SG745 Crystal Black Yellow<br />
B1SG754 Crystal Clear<br />
Yukon<br />
Crafted of high-grade polycarbonate material. Ultra light frame<br />
design for comfort fit. Non-slip temple ends. Lenses provide 99.9%<br />
protection from harmful UVA and UVB rays. Meets and exceeds<br />
ANSI-Z87+ specifications.<br />
Product No. Frames Lens<br />
B1SG621 Fog Black Smoke<br />
B1SG624 Fog Black Clear<br />
B1SG628 Fog Black Blue Revo<br />
B1SG6912 Black/Orange Gold Revo<br />
Cords<br />
Product No.<br />
B1SGG3<br />
B1SGG4<br />
Frames<br />
Thin rope-style<br />
Thick woven-style<br />
SAFETY<br />
65
Printed Materials<br />
Sunbelt<br />
Arborist DVD<br />
• Great arborist parts training video for dealer<br />
sales personnel<br />
• Menu navigational tool included<br />
• Taught by professional arborist<br />
B1AB2V<br />
Tree Climber’s Handbook<br />
• Written by Jeff Jepson<br />
• Single pack<br />
• Order in multiples<br />
of one<br />
B1AB100 English<br />
B1AB101 Spanish<br />
Climbing Knots<br />
Tautline Hitch and Blake’s Hitch<br />
These are used as the “climbers knot” to tie in. They must be kept<br />
tight to be effective. Extreme care must be taken to minimize heat<br />
build up in these hitches<br />
caused by fast descents. It<br />
is likely that a “bail out”<br />
descent will create sufficient<br />
heat to melt completely<br />
through the climbing<br />
line.<br />
Prusik Loop<br />
Used to “self-belay” when using the “footlock”,<br />
it allows the climber to rest during<br />
the ascent. It must be tight to be effective<br />
and must never be used to descend a tree<br />
because it has little holding power in the<br />
direction it is pushed.<br />
Mounter Hitch<br />
The Mounter Hitch is used with a carabiner to<br />
control a descent and is considered more effective<br />
than a Figure “8” descender. It is easy to tie<br />
and is known as a running knot. It should not be<br />
used to rappel because heat build up can damage<br />
the rope.<br />
Double Fisherman’s Knot<br />
Normally used to tie two ropes of equal size together.<br />
Most commonly used by arborist to create a Prusik Loop.<br />
Bowline<br />
The Bowline will not slip or jam and is easily<br />
untied. It is generally used to attach the climbing<br />
line to saddle D-rings and to attach snaps<br />
or hooks to ropes. The Bowline creates about<br />
40% rope strength reduction.<br />
Clove Hitch with Half Hitch<br />
The Clove Hitch is easy to tie and untie.<br />
It is often used to send equipment to<br />
climbers in a tree or in combination with<br />
a half hitch to tie limbs. The Clove Hitch<br />
creates approximately 40% rope strength<br />
reduction.<br />
Timber Hitch<br />
The Timber Hitch is sometimes used to attach a<br />
false crotch to a tree or to lower or hoist limbs. It<br />
should be considered somewhat unreliable<br />
because it has a tendency to slip or come<br />
undone. The Timber Hitch creates approximately<br />
50% rope strength reduction.<br />
The Figure ”8“<br />
Figure “8” is tied in the ends of lines to stop them<br />
from running out through blocks or other knots. It is<br />
easily untied even when cinched down tight and<br />
should be tied at least four inches from the bitter end<br />
so it has room to slip.<br />
66<br />
SAFETY<br />
Safety
Chain Saw Loops<br />
WHEN ORDERING…<br />
PART NUMBER GUIDE<br />
B1 N 1 BL 44 E<br />
®<br />
SUNBELT<br />
PREFIX<br />
PITCH GAUGE TYPE LINK LOOP<br />
Semi-Chisel: Low Profile 3/8" Extended Pitch<br />
A low profile 3/8" extended pitch chain for consumer applications. Offset type depth gauge for faster cutting, smoother cutting, less<br />
chain wear and less vibration. Unlike the competitors, the components are made from nickel alloy steel which gives the chain<br />
toughness, abrasive resistance and ductility. Proven semi-chisel cutter design which is the best compromise of speed and durability.<br />
Chain Length/ Chain Length/<br />
Part No. Oregon Cross Drive Links Drive Links<br />
N1C / N1CBL 91VS / 91VG 39 54<br />
Magna Chisel: 3/8" Pitch<br />
40 55<br />
41 56<br />
44 57<br />
45 58<br />
49 59<br />
50 60<br />
52 62<br />
53 64<br />
A 3/8" pitch chain ideal chain for loggers who like the speed, aggressiveness and smooth cutting of the chisel cutter style. High<br />
cutter profile for fast chip clearance. Chisel cutter style for fast cutting. Ramped depth gauge for reduced kickback.<br />
Chain Length/ Chain Length/<br />
Part No. Oregon Cross Drive Links Drive Links<br />
A1LMBL, A2LMBL, A3LMBL 72, 73, 75 LP 59 71<br />
A1LM, A2LM, A3LM 72, 73, 75 LG 60 72<br />
66 81<br />
68 84<br />
70<br />
Chisel: .325 Pitch<br />
A professional .325 pitch chain with an aggressive cutter which out performs the competition. The chain comes with a ramp style depth<br />
gauge and is available in the most popular dealer style. Without a bumper link or ANSI approved with bumper link. Unlike the competitors,<br />
the components are made from nickel alloy steel which gives the chain toughness, abrasive resistance and ductility.<br />
Chain Length/ Chain Length/<br />
Part No. Oregon Cross Drive Links Drive Links<br />
K1LBL, K2LBL, K3LBL 20, 21, 22 LP / 33, 34, 35 SL 62 74<br />
K1L, K2L, K3L 33, 34, 35 LG 66 78<br />
67 81<br />
72<br />
68<br />
FORESTRY
Semi-Chisel: .325 Pitch<br />
.325 pitch semi-Chisel narrow kerf with bumper link. Takes less wood with cut which helps increase engine performance.<br />
Chain Length/<br />
Part No. Oregon Cross Drive Links<br />
K1NKBL 95VP 66<br />
72<br />
Semi Chisel: Low Profile 3/8" Extended Pitch Chain<br />
A low profile 3/8" extended pitch chain. Unlike the competitors, the components are made from nickel alloy steel which gives the<br />
chain toughness, abrasive resistance and ductility. Proven semi-chisel cutter design which is the best compromise of speed and<br />
durability. This chisel has a radical narrow gauge that utilizes a narrow drive tang but uses standard gauge for the other components.<br />
This allows ease of breaking and spinning the chain unlike the competitors which bend and twist. It also means fewer components<br />
that a dealer must stock since the majority of components interchange with N1C.<br />
Chain Length/ Chain Length/<br />
Part No. Oregon Cross Drive Links Drive Links<br />
N4CBL 90SG 39 50<br />
40 52<br />
44 55<br />
Chain Saw Reels<br />
Part No. Features Oregon Cross Length<br />
B1N1C25R 3/8" Lo Pro .050", Semi Chisel Chain 91VS 25'<br />
B1N1C100R 3/8" Lo Pro .050", Semi Chisel Chain 91VS 100'<br />
B1N1CBL25R 3/8" Lo Pro .050", Semi Chisel Chain w/bumper link 91VG 25'<br />
B1N1CBL100R 3/8" Lo Pro .050", Semi Chisel Chain w/bumper link 91VG 100'<br />
B1K1L25R .325", .050" Chisel Chain 33LG 25'<br />
B1K1L100R .325", .050" Chisel Chain 33LG 100'<br />
B1K2L25R .325", .058" Chisel Chain 34LG 25'<br />
B1K2L100R .325", .058" Chisel Chain 34LG 100'<br />
B1K3L25R .325", .063" Chisel Chain 35LG 25'<br />
B1K3L100R .325", .063" Chisel Chain 35LG 100'<br />
B1K1LBL100R .325", .050" Chisel Chain w/bumper link 20LP 100'<br />
B1K2LBL100R .325", .058" Chisel Chain w/bumper link 21LP 100'<br />
B1K3LBL100R .325", .063" Chisel Chain w/bumper link 22LP 100'<br />
B1K1NKBL100R .325", .050" Narrow Kerf bumper link chain 95VP 100'<br />
B1A1LMBL25R 3/8", .050" Chisel Chain w/bumper link 72LP 25'<br />
B1A1LMBL100R 3/8", .050" Chisel Chain w/bumper link 72LP 100'<br />
B1A2LMBL100R 3/8", .058" Chisel Chain w/bumper link 73LP 100'<br />
B1A3LMBL100R 3/8", .063" Chisel Chain w/bumper link 75LP 25'<br />
B1A1LM25R 3/8", .050" Chisel Chain 72LG 100'<br />
B1A1LM100R 3/8", .050" Chisel Chain 72LG 100'<br />
B1A2LM25R 3/8", .058" Chisel Chain 73LG 25'<br />
B1A2LM100R 3/8", .058" Chisel Chain 73LG 100'<br />
B1A3LM25R 3/8", .063" Chisel Chain 75LG 25'<br />
B1A3LM100R 3/8", .063" Chisel Chain 75LG 100'<br />
B1N4CBL100R 3/8", .043" Semi-Chisel low profile w/bumper link 90SG 100'<br />
B1G7S50R 3/4", .122" Harvester Chain 11BC 50'<br />
FORESTRY<br />
69
Bars<br />
Mini Hobby Champ<br />
Laminated bar. Designed specifically for consumer use. Available in 10" to 18" lengths. Perfect for today's smaller chain saws. Alloy<br />
steel nose components. Small nose radius helps minimize kickback. Hardened sprocket and bearings. Recommended for saw sizes<br />
2.3 cu. in. (33cc).<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B11010N4MHC 10" 10 3/8" LP .043" 104MLEA041<br />
B11022N1MHC 10" 22 3/8" LP .050" 100SDEA218<br />
B11201N1MHC 12" 01 3/8" LP .050" 120SDEA095<br />
B11210N1MHC 12" 10 3/8" LP .050" 120SDEA041<br />
B11222N1MHC 12" 22 3/8" LP .050" 120SDEA218<br />
B11222N4MHC 12" 22 3/8" LP .043" 124MLEA218<br />
B11226N1MHC 12" 26 3/8" LP .050" 120SDEA074<br />
B11226N4MHC 12" 26 3/8" LP .043" 124MLEA074<br />
B11228N1MHC 12" 28 3/8" LP .050" 120DGEA061<br />
B11410N1MHC 14" 10 3/8" LP .050" 140SDEA041<br />
B11410N4MHC 14" 10 3/8" LP .043" 144MLEA041<br />
B11426N1MHC 14" 26 3/8" LP .050" 140SDEA074<br />
B11426N4MHC 14" 26 3/8" LP .043" 144MLEA074<br />
B11428N1MHC 14" 28 3/8" LP .050" 140DGEA061<br />
B11429N1MHC 14" 29 3/8" LP .050" 140SDEA318<br />
B11610N1MHC 16" 10 3/8" LP .050" 160SDEA041<br />
B11626N1MHC 16" 26 3/8" LP .050" 160SDEA074<br />
B11628N1MHC 16" 28 3/8" LP .050" 160DGEA061<br />
B11629N1MHC 16" 29 3/8" LP .050" 160SDEA318<br />
B11810N1MHC 18" 10 3/8" LP .050" 180SDEA041<br />
B11829N1MHC 18" 29 3/8" LP .050" 180SDEA318<br />
Narrow Kerf<br />
Laminated bar. Designed for professional, semi-professional, and consumer use. Narrow kerf cutting system requires less horsepower.<br />
Hardened alloy steel construction. Replaceable alloy steel nose components. Hardened sprocket and bearings. Recommended for saw<br />
sizes 2.3 to 4.0 cu. in. (38cc to 68cc).<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B11601WK1NKC 16" 01 .325" .050" 160MLBK095<br />
B11801WK1NKC 18" 01 .325" .050" 180MLBK095<br />
®<br />
70 FORESTRY<br />
Forestry
Hobby Champ<br />
Laminated bar. Designed for professional, semi-professional, and consumer uses. Available in 12" to 18" lengths. Perfect for today's<br />
smaller chainsaws. Replaceable alloy steel nose components. Hardened sprocket and bearings. Recommended for saw sizes 2.3<br />
to 4.0 cu. in. (38cc to 68cc).<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B11201N1HC 12" 01 3/8" LP .050" 120SPEA095<br />
B11210N145HC 12" 10 3/8" LP .050" 120GPEA041<br />
B11401N152HC 14" 01 3/8" LP .050" 140SPEA095<br />
B11410N152HC 14" 10 3/8" LP .050" 140GPEA041<br />
B11426N150HC 14" 26 3/8" LP .050" 140SPEA074<br />
B11428N153HC 14" 28 3/8" LP .050" 140GPEA061<br />
B11429N150HC 14" 29 3/8" LP .050" 140SPEA318<br />
B11601N157HC 16" 01 3/8" LP .050" 160SPEA095<br />
B11610N156HC 16" 10 3/8" LP .050" 160GPEA041<br />
B11626N155HC 16" 26 3/8" LP .050" 160SPEA074<br />
B11628N159HC 16" 28 3/8" LP .050" 160GPEA061<br />
B11629N154HC 16" 29 3/8" LP .050" 160SPEA318<br />
B11652N156HC 16" 52 3/8" LP .050" 160SPEA064<br />
B11810WK1HC 18" 10 .325" .050" 180GDBK041<br />
Timber Champ<br />
Laminated bar. Designed for professional and semi-professional use. Available in 13" to 20" lengths. Hardened alloy steel construction.<br />
Replaceable alloy steel nose components. Hardened sprocket and bearings. Recommended for saw sizes 2.3 to 4.0 cu in. (38 cc to 68cc).<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B11301WK2TC12 13" 01 .325" .058" 138SLBK095<br />
B11601WK166TC12 16" 01 .325" .050" 160SLGK095<br />
B11601WK2TC12 16" 01 .325" .058" 168SLGK095<br />
B11609K166TC12 16" 09 .325" .050" 160GLGK041<br />
B11610WK1TC 16" 10 .325" .050" 160PXBK041<br />
B11621A160TC11 16" 21 3/8" .050" 160GLHD196<br />
B11626K162TC 16" 26 .325" .050" 160SLBA074<br />
B11626K362TC 16" 26 .325" .063" 163SLBA074<br />
B11641A160TC 16" 41 3/8" .050" 160GLHD176<br />
B11642A160TC 16" 42 3/8" .050" 160SLHD025<br />
B11642K167TC12 16" 42 .325" .050" 160SLGD025<br />
B11642K367TC12 16" 42 .325" .063" 163SLGD025<br />
B11801WA164TC11 18" 01 3/8" .050" 180SLHK095<br />
B11801WK1TC12 18" 01 .325" .050" 180SLGK095<br />
B11801WK2TC12 18" 01 .325" .058" 188SLGK095<br />
B11809K1TC12 18" 09 .325" .050" 180GLGK041<br />
B11810WK1TC 18" 10 .325" .050" 180PXBK041<br />
B11826K368TC 18" 26 .325" .063" 183SLBA074<br />
B11841A166TC 18" 41 3/8" .050" 180PXDD176<br />
B11842A166TC11 18" 42 3/8" .050" 180SLHD025<br />
FORESTRY<br />
71
Bars: Timber Champ - continued<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B11842K174TC12 18" 42 .325" .050" 180SLGD025<br />
B11842K374TC12 18" 42 .325" .063" 183SLGD025<br />
B11881A168TC11 18" 81 3/8" .050" 180SLHD009<br />
B12001WA172TC11 20" 01 3/8" .050" 200SLHK095<br />
B12001WK178TC12 20" 01 .325" .050" 200SLGK095<br />
B12001WK1TC12 20" 01 .325" .050" 200RNBK095<br />
B12001WK278TC12 20" 01 .325" .058" 208SLGK095<br />
B12009A170TC 20" 09 3/8" .050" 200SLDK041<br />
B12009K178TC 20" 09 .325" .050" 200PXBK041<br />
B12010WK178TC12 20" 10 .325" .050" 200GLGK041<br />
B12021A170TC11 20" 21 3/8" .050" 200GLHD196<br />
B12024A170TC 20" 24 3/8" .050" 200PXDD176<br />
B12041A170TC 20" 41 3/8" .050" 200GLHD176<br />
B12042A172TC11 20" 42 3/8" .050" 200SLHD025<br />
B12042K381TC12 20" 42 .325" .063" 203SLGD025<br />
B12081A172TC11 20" 81 3/8" .050" 200SLHD009<br />
Premium Sprocket Tip<br />
Solid Bar. Professional quality guide bar. Available in 16" to 36" lengths. Solid steel sprocket nose bar for .325" and 3/8" pitch chains.<br />
Replaceable sprocket nose assembly. Through hardened bar body. Ground and polished finish. Recommended for saw sizes<br />
3.5 cu. in. (57cc).<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B11601WA160PS 16" 01 3/8" .050" 160RNDK095<br />
B11601WK166PS 16" 01 .325" .050" 160RNBK095<br />
B11601WK266PS 16" 01 .325" .058" 168RNBK095<br />
B11641A160PS 16" 41 3/8" .050" 160RNDD176<br />
B11642A160PS 16" 42 3/8" .050" 160RNDD025<br />
B11642K167PS 16" 42 .325" .050" 160RNBD025<br />
B11681A160PS 16" 81 3/8" .050" 160RNDD009<br />
B11801WA164PS 18" 01 3/8" .050" 180RNDK095<br />
B11801WA264PS 18" 01 3/8" .058" 188RNDK095<br />
B11801WK172PS 18" 01 .325" .050" 180RNBK095<br />
B11801WK272PS 18" 01 .325" .058" 188RNBK095<br />
B1841A164PS 18" 41 3/8" .050" 180RNDD176<br />
B11842A166PS 18" 42 3/8" .050" 180RNDD025<br />
B11842A366PS 18" 42 3/8" .063" 183RNDD025<br />
B11842K174PS 18" 42 .325" .050" 180RNBD025<br />
B11842K374PS 18" 42 .325" .063" 183RNBD025<br />
B11881A168PS 18" 81 3/8" .050" 180RNDD009<br />
®<br />
72 FORESTRY<br />
Forestry
Bars: Premium Sprocket - continued<br />
Part No. Length Mount Pitch Gauge Oregon<br />
B12001WA172PS 20" 01 3/8" .050" 200RNDK095<br />
B12001WA272PS 20" 01 3/8" .058" 208RNDK095<br />
B12021A170PS 20" 21 3/8" .050" 200RNDD196<br />
B12041A170PS 20" 41 3/8" .050" 200RNDD176<br />
B12041A172PS 20" 42 3/8" .050" 200RNDD025<br />
B12042A372PS 20" 42 3/8" .063" 203RNDD025<br />
B12081A172PS 20" 81 3/8" .050" 200RNDD009<br />
B12081A272PS 20" 81 3/8" .058" 208RNDD009<br />
B12081A372PS 20" 81 3/8" .063" 203RNDD009<br />
B12401WA184PS 24" 01 3/8" .050" 240RNDK095<br />
B12441A181PS 24" 41 3/8" .050" 240RNDD176<br />
B12442A184PS 24" 42 3/8" .050" 240RNDD025<br />
B12442A384PS 24" 42 3/8" .063" 243RNDD025<br />
B12481A184PS 24" 81 3/8" .050" 240RNDD009<br />
B12481A284PS 24" 81 3/8" .058" 248RNDD009<br />
B12481A384PS 24" 81 3/8" .063" 243RNDD009<br />
B12842A191PS 28" 42 3/8" .050" 280RNDD025<br />
B12822A391PS 28" 22 3/8" .063" 283RNDD025<br />
B12881A193PS 28" 81 3/8" .050" 280RNDD009<br />
B12881A393PS 28" 81 3/8" .063" 283RNDD009<br />
B13042A198PS 30" 42 3/8" .050" 300RNDD025<br />
B13081A198PS 30" 81 3/8" .050" 300RNDD009<br />
B13242A1105PS 32" 42 3/8" .050" 320RNDD025<br />
B13281A1105PS 32" 81 3/8" .050" 320RNDD009<br />
B13281A3105PS 32" 81 3/8" .063" 323RNDD009<br />
B13442A3110PS 34" 42 3/8" .063" 343RNDD025<br />
B13681A3115PS 36" 81 3/8" .063" 363RNDD009<br />
PREMIUM HARD TIP<br />
Solid bar. Professional quality guide bar. Available in 16" to 24"<br />
lengths. Hard nosed solid steel bar with extra long stellite weld<br />
for use in dirty or abrasive conditions. Through hardened bar<br />
body. Special alloy steel for strength. Ground polished finish.<br />
Part No. Length Mount Gauge Oregon Part No. Length Mount Gauge Oregon<br />
B1601W050PH 16" 01 .050" 160ATMK095<br />
B11641050PH 16" 41 .050" 160ATMD176<br />
B11642050PH 16" 42 .050" 160ATMD025<br />
B11642063PH 16" 42 .063" 160ATMD025<br />
B11681050PH 16" 81 .050" 160ATMD00<br />
B11781063PH 17" 81 .063" 173ATMD009<br />
B11842050PH 18" 42 .050" 180ATMD025<br />
B11842063PH 18" 42 .063" 183ATMD025<br />
B11881050PH 18" 81 .050" 180ATMD009<br />
B11881058PH 18" 81 .058" 188ATMD009<br />
B12001W050PH 20" 01 .050" 200ATMK095<br />
B120211050PH 20” 21 .050" 200ATMD196<br />
B12041050PH 20" 41 .050" 200ATMD176<br />
B12042050PH 20" 42 .050" 200ATMD025<br />
B12042063PH 20" 42 .063" 203ATMD025<br />
B12081050PH 20" 81 .050" 200ATMD009<br />
B12081058PH 20" 81 .058" 208ATMD009<br />
B12081063PH 20" 81 .063" 203ATMD009<br />
B12441050PH 24" 41 .050" 240ATMD176<br />
B12442050PH 24" 42 .050" 240ATMD025<br />
B12442063PH 24" 42 .063" 243ATMD025<br />
B12481050PH 24" 81 .050" 240ATMD009<br />
B12481063PH 24" 81 .063" 243ATMD009<br />
FORESTRY<br />
73
Bar Chain Combos<br />
®<br />
Part No. Description Oregon<br />
B1600553 14" Mini Hobby Champ Bar with 3/8" LP chain, 52DL. 105699, A041 Mount<br />
Poulan-Sears, Echo, Homelite, Husquvarna<br />
B1600547 14" Hobby Champ Bar with 3/8" LP Chain, 49DL. McCulloch 108764, A318 Mount<br />
B1600546 16" Hobby Champ Bar with 3/8" LP Chain, 54DL. McCulloch 108763, A318 Moun<br />
B1600557 16" Mini Hobby Champ Bar with 3/8" LP chain, 56DL. Remington A089 Mount<br />
B1600554 16" Mini Hobby Champ Bar with 3/8" LP chain, 57DL. Echo A041 Mount<br />
B1600550 16" Mini Hobby Champ Bar with 3/8" LP chain, 56DL. 105700, A041 Mount<br />
Poulan-Sears, Homelite, Husquvarna<br />
B1600551 18" Mini Hobby Champ Bar with 3/8" LP chain, 62DL. A041 Mount<br />
Poulan, Homelite<br />
B1600555 18" Hobby Champ Bar with .325" chain, 72DL. 105715, K041 Mount<br />
Poulan-Sears, Echo, Homelite<br />
B1600552 20" Hobby Champ Bar with .325" chain, 78DL. Poulan K095 Mount<br />
Chain Saw Accessories<br />
Round Files<br />
Carlton Pferd Oregon<br />
Part No. Description Part No. Size Cross Reference<br />
B175060 7/32'' B1PF8732 7/32'' 70502<br />
B175070 3/16'' B1PF8316 3/16'' 70503<br />
B175090 13/64'' B1PF81364 13/64'' 70505<br />
B1CA75080 11/64" B1PF81164 11/64'' 70511<br />
B175050 5/32'' B1PF8532 5/32'' 70504<br />
B1PF814 1/4'' 70501<br />
File Guides<br />
• Contains 1 handle, 1 round file and 1 file guide<br />
Oregon Cross<br />
Part No. Description Reference<br />
B19732CA 7/32'' 31686<br />
B19316CA 3/16'' 31690<br />
B19164CA 11/64'' 31692<br />
B19532CA 5/32'' 37534<br />
Plastic Wedges<br />
• Strong, tough and lightweight<br />
• Serrations hold wedge in the tree securely<br />
Oregon Cross<br />
Part No. Description Reference<br />
B179002 5-1/2'' 23562<br />
B179003 8'' 23561<br />
B179004 10'' 23560<br />
B179005 12'' 26782<br />
High-Quality Chain Saw Wrenches<br />
• Our 4 most popular wrenches<br />
Part No. Dimensions Fits<br />
B112116 16mm (5/8") x 13mm (1/2") x 2-3/4" McCulloch<br />
B112125 19mm (3/4") x 13mm (1/2") x 2-9/16" Poulan<br />
B112126 19mm (3/4") x 13mm (1/2") x 2-3/16" Husky/Echo<br />
B112127 19mm (3/4") x 16mm (5/8") x 3-3/16" Homelite/Stihl<br />
74<br />
FORESTRY<br />
Forestry
Replacement Breaker Punch<br />
• EFFCO Punch<br />
B138594<br />
Bar Covers<br />
•16"- 20" bar cover 28933<br />
B178031<br />
Pocket Chain Breaker<br />
• Assembly includes: Punch Anvil for: 1/4",<br />
.325", 3/8", .404", 1/2" pitch chains<br />
B110900<br />
Universal Starter Handles<br />
B1SP13 B1SP22 B1SP24<br />
3-Pack Sharpening Stones<br />
• These stones leave an excellent<br />
cutting edge<br />
• Available in packs of 3<br />
• Choice of diameters<br />
• Threaded ends<br />
Part No. Pitch<br />
B1G417 5/32"<br />
B1G418 3/16"<br />
B1G419 7/32"<br />
Electric Granberg<br />
12V Grinder<br />
• 25,000 RPM motor<br />
• 30 degree and 35 degree angle guides<br />
Heavy-Duty Rechargeable<br />
Saw Chain Grinder<br />
• Quickly and easily maintains saw chain for optimum<br />
performance<br />
• Heavy-duty grinder features, variable speed motor<br />
• Rechargeable battery with extended battery life<br />
• LED work light<br />
• AC outlet battery charger<br />
• Convenient carrying case<br />
B1CS100<br />
Hydraulic Bench Chain Grinder<br />
• A durable machine built with the quality and features<br />
needed for frequent, high-volume chain sharpening<br />
• Sharpens round-ground 1/4", .325", 3/8" and .404"<br />
pitch chains<br />
• Powerful motor<br />
• Easy-to-use controls, hydraulic vise lock and unlock<br />
• Internal light and excellent safety features<br />
• Single phase, 110 V-AC, 60 Hz, 3 amp, 285 watt<br />
electric motor<br />
• .38 horsepower motor<br />
• Chain rails lock together automatically when grinding<br />
• Used for most popular size chain<br />
B1SU166<br />
B1SU136R<br />
FORESTRY<br />
75
11H/11BC 3/4 Pitch Chain Grinder<br />
• Durable machine built for high-volume chain sharpening<br />
• Powerful motor, easy-to-use controls<br />
• Replacement Grinding Wheel available - B1OR534516<br />
• Replacement parts available separately<br />
• Specifications: Single phase, 110 V-AC, 60 Hz, 3 amp,<br />
285 watt, 3400 RPM direct-drive motor, 0.38 horsepower,<br />
• Net weight 16 lbs.<br />
B1SU156<br />
Complete Bench Grinder<br />
• Non-reversible motor<br />
B1SU136R<br />
Carlton Bench Chain Breaker<br />
• Specialty designed cam for more<br />
punching leverage<br />
• Unique anvil for driving bar nose rivets<br />
• Made with welded construction<br />
B175310<br />
Spencer Original Logging Tape<br />
• 75'<br />
B1975<br />
Wood File Handle<br />
• 35 degree filing bevel<br />
B1FH1<br />
Plastic File Handle<br />
• Use with 5/32", 3/16", 13/16" and<br />
7/32" files<br />
• Large handle design<br />
• Order in multiples of ten<br />
B1FH2<br />
Plastic File Handle<br />
• Use with 5/32", 3/16", 13/16" and<br />
7/32" files<br />
• Small handle design<br />
B1FH3<br />
76<br />
FORESTRY<br />
Windsor Loggers Tape<br />
• 50'<br />
• High impact case will not dent or rust<br />
• Rubber return bumper and spring<br />
loaded hook<br />
B12601<br />
B1FH1<br />
B1FH2<br />
Adjustable File Handle<br />
• Plastic handle with screw-on collar<br />
• Adjust to fit all six files<br />
• Unique "ears" for correct filing angle<br />
• Order in multiples of ten<br />
B1FH4<br />
Carlton Rivet Spinner Assembly<br />
• Built to fit all pitches<br />
• Tough enough for 3/4" chain<br />
• Features an adaptor to attach an<br />
electric drill for high speed rivet<br />
spinning<br />
• Welded steel construction<br />
B175320<br />
B1FH3<br />
B1FH4<br />
Forestry
Professional Rigging Products<br />
Quality solid steel construction with a dual-ratchet drive design.<br />
Tote-Tugger<br />
The compact Come-A-Long in a carrying case.<br />
• Folds in a compact carrying<br />
case<br />
• Stores behind seat or in trunk<br />
• Convenient, easy-to-use<br />
B1TT1500<br />
• Heavy-duty, dual ratchet<br />
design<br />
• 750 lbs. lift/1,500 lbs. pull<br />
• 15' single cable line reach<br />
<strong>Rope</strong> Hoist/Block and Tackle<br />
• 4:1 mechanical advantage<br />
• 350 lb. maximum lift capacity<br />
• 700 lb. maximum pull capacity<br />
• 12' reach (50' rope)<br />
• Cam lever load lock<br />
• Safety latched hooks<br />
B1TTRH70050<br />
Commercial Grade Cable and Web Hoist/<br />
Pullers (Small Frame)<br />
Professional Grade Cable Hoist/Pullers<br />
(Medium Frame)<br />
• Cable hoist<br />
• 1,000 lbs. lift/<br />
2,000 lbs. pull<br />
• 15' single line<br />
reach<br />
• Cable hoist<br />
• 2,000 lbs./<br />
4,000 lbs. pull<br />
• 7-1/2" double<br />
reach line<br />
• Web hoist<br />
• 1,000 lbs. lift/<br />
2,000 lbs. pull<br />
• 8' single line<br />
reach<br />
• Cable hoist<br />
• 1,500 lbs. lift/<br />
3,000 lbs. pull<br />
• 6' double line<br />
reach<br />
• Cable hoist<br />
• 2,000 lbs. lift/<br />
4,000 lbs. pull<br />
• 6' double line<br />
reach<br />
B1TT115C<br />
B1TT275C<br />
B1TT18W<br />
B1TT30006C<br />
B1TT40006C<br />
FORESTRY<br />
77
Heavy-Duty Industrial (Large Frame)<br />
• Cable hoist<br />
• 1,500 lbs. lift/<br />
3,000 lbs. pull<br />
• 12' single line<br />
reach<br />
B1TT300012C<br />
• Cable hoist<br />
• 2,500 lbs. lift/<br />
5,000 lbs. pull<br />
• 20' single line<br />
reach<br />
• 10' double line<br />
reach<br />
B1TT2550<br />
• Cable hoist<br />
• 3,000 lbs. lift/<br />
6,000 lbs. pull<br />
• 6' double line<br />
reach<br />
B1TT60006C<br />
Logging Supplies<br />
Peavies - Solid Socket<br />
• Duckbill hook<br />
• Hardwood handle<br />
•Tubular steel socket<br />
• Driven pick<br />
Part No. Diameter Length Approx, Weight Packaged Quantity<br />
B185042 2-1/2" 4' 7.5 lbs. (each) 2<br />
B185043 2-1/2" 4-1/2" 8.33 lbs. (each) 2<br />
B185044 2-1/2" 5' 9.5 lbs. (each) 2<br />
Peavies<br />
Cant Hooks<br />
Hookaroons<br />
Cant Hooks<br />
• Duckbill hook and extension toe ring<br />
• Supreme hardwood handle<br />
Part No.<br />
Description<br />
Hookaroons<br />
• 24 oz. curved head<br />
• Supreme 36" hardwood handle<br />
B112320<br />
B106100<br />
B106120<br />
B106130<br />
B106140<br />
2-1/4" x 2' handle<br />
2-1/4" x 3' handle<br />
2-1/4" x 3-1/2' handle<br />
2-1/4" x 4' handle<br />
78 FORESTRY<br />
Forestry
Carabiner Reference Chart<br />
Part No. Manuf. Name Lock Material Major Axis Minor Axis Open Gate Gate Opening ANSI<br />
B1ABM18 Petzl Am’D Ball Lock Aluminum 6295 lbs. 28 kN 1574 lbs. 7 kN 1798 lbs. 8 kN 15/16" 24mm Yes Yes<br />
B1ABM34SL Petzl Am’D Screw Lock Aluminum 6295 lbs. 28 kN 1574 lbs. 7 kN 1798 lbs. 8 kN 1" 25mm Yes<br />
B1ABM34TL Petzl Am’D Triact Lock Aluminum 6295 lbs. 28 kN 1798 lbs. 8 kN 1574 lbs. 7 kN 15/16" 24mm Yes Yes<br />
B1ABM25 Petzl William Ball Lock Aluminum 5620 lbs. 25 kN 1574 lbs. 7 kN 1574 lbs. 7 kN 7/8" 22mm Yes Yes<br />
B1ABM36SL Petzl William Screw Lock Aluminum 5620 lbs. 25 kN 1574 lbs. 7 kN 1574 lbs. 7 kN 13/16" 21mm Yes<br />
B1ABM36TL Petzl William Triact Lock Aluminum 5620 lbs. 25 kN 1574 lbs. 7 kN 1574 lbs. 7 kN 13/16" 21mm Yes Yes<br />
B1ABM32 Petzl Rx Auto Lock Steel 8992 lbs. 40 kN 2698 lbs. 12 kN 3147 lbs. 14 kN 1" 25mm Yes<br />
B1ABM20 Petzl Attache Screw Lock Aluminum 5171 lbs. 23 kN 1574 lbs. 7 kN 1349 lbs. 6 kN 13/16" 20mm Yes<br />
B1AB21002 Petzl Kador Triact Lock Steel 8992 lbs. 40 kN 2248 lbs. 10 kN 2698 lbs. 12 kN 13/16" 23.5mm Yes Yes<br />
B1ABM15 Petzl Spirit Non Locking Aluminum 5171 lbs. 23 kN 2248 lbs. 10 kN 2023 lbs. 9.5 kN 13/16" 20mm Yes<br />
B1ABP42 Petzl Caritool Non Locking Plastic 11 lbs. – – – – – 3/4" 19mm<br />
B1ABP11 Petzl Delta Screw Lock Steel 5620 lbs. 25 kN 2248 lbs. 10 kN – – 7/16" 11mm Yes<br />
B1AB266 Kong Paddle Non Locking Aluminum 5000 lbs. 22.3 kN 1798 lbs. 8 kN 1574 lbs. 7 kN 1-1/4" 32mm Yes<br />
B1AB901 Kong Paddle Wire Non Locking Aluminum 5000 lbs. 22.3 kN 1798 lbs. 8 kN 1574 lbs. 7 kN 1-1/4" 32mm Yes<br />
B1AB563 Kong Speed Line Non Locking Steel 5395 lbs. 24 kN 1574 lbs. 7 kN 1798 lbs. 8 kN 1-1/16" 27mm Yes<br />
B1AB912 Kong Rescue Aluminum Twist Lock Aluminum 6744 lbs. 30 kN 2023 lbs. 9 kN 2023 lbs. 9 kN 1-1/16" 27mm Yes Yes<br />
B1AB411 Kong Rescue Steel Screw Lock Steel 11240 lbs. 50 kN 2923 lbs. 13 kN 4496 lbs. 20 kN 1" 27mm Yes<br />
B1AB412 Kong Rescue Steel Twist Lock Steel 11240 lbs. 50 kN 2923 lbs. 13 kN – – 1-1/16" 27mm Yes Yes<br />
B1AB962 Kong Rombo Twist Lock Aluminum 5000 lbs. 22.3 kN 1798 lbs. 8 kN – – 15/16" 25mm Yes Yes<br />
B1ABQL06 US Rigging Quick Link Twist Lock Steel 6000 lbs. 26.6 kN – – – – 1/4" 7mm<br />
B1ABQL10 US Rigging Quick Link Twist Lock Steel 12000 lbs. 53.3 kN – – – – 3/8" 10mm<br />
B1AB85221 Climb Right Fixed Eye Triple Lock Aluminum 5620 lbs. 25 kN 1798 lbs. 8 kN 1798 lbs. 8 kN 7/8" 22mm Yes<br />
B1AB85250 Climb Right Triple D Triple Lock Aluminum 6070 lbs. 27 kN 1798 lbs. 8 kN 1798 lbs. 8 kN 7/8" 22mm Yes
<strong>Rope</strong> Specifications<br />
Climbing Line<br />
Average Weight Cover Available Length<br />
Page <strong>Rope</strong> Manufacturer Size Strength WLL Per 100' Material Construction 100' 120' 150' 200' 600'<br />
2 Velocity• Samson 7/16" (11mm) 6,000 lbs. 600 lbs. 5.6 lbs. Polyester 24-Strand Double Braid x x x<br />
2 Blue Streak• Samson 1/2" (12mm) 8,100 lbs. 810 lbs. 7.7 lbs. Polyester 16-Strand Kernmantle x x x<br />
2 Gold Streak• Samson 1/2" (12mm) 8,100 lbs. 810 lbs. 7.7 lbs. Polyester 16-Strand Kernmantle x x x<br />
2 Multi-Color• Samson 1/2" (12mm) 8,100 lbs. 810 lbs. 7.7 lbs. Polyester 16-Strand Kernmantle x x x<br />
3 <strong>True</strong>-Blue Samson 1/2" (12mm) 7,300 lbs. 730 lbs. 8.8 lbs. Polyester 12-Strand Single Braid x x x<br />
3 Arbor-Plex Samson 1/2" (12mm) 6,000 lbs. 600 lbs. 6.8 lbs. Polyester 12-Strand Single Braid x x x<br />
4 Safety Blue New England 1/2" (12mm) 7,700 lbs. 770 lbs. 7.0 lbs. Poly Blend 16-Strand Kernmantle x x x<br />
4 Hi-Vee New England 1/2" (12mm) 7,700 lbs. 770 lbs. 7.0 lbs. Poly Blend 16-Strand Kernmantle x x x<br />
4 Ultra-Vee New England 1/2" (12mm) 7,700 lbs. 770 lbs. 7.0 lbs. Poly Blend 16-Strand Kernmantle x x x<br />
4 Safety Pro 12 New England 1/2" (12mm) 6,600 lbs. 660 lbs. 7.55 lbs. Poly Blend 12-Strand Kernmantle x x x<br />
5 Diamond Back Pelican 1/2" (12mm) 8,000 lbs. 800 lbs. 7.73 lbs. Polyester 16-Strand Parallel Core x x x<br />
Rigging Line<br />
Average Weight Cover Available Length<br />
Page <strong>Rope</strong> Manufacturer Size Strength WLL Per 100' Material Construction 100' 120' 150' 200' 600'<br />
6 Stable Braid Samson 1/2" (12mm) 10,400 lbs. 2,080 lbs. 8.2 lbs. Polyester Double Braid x x<br />
6 Stable Braid Samson 9/16" (14mm) 13,300 lbs. 2,660 lbs. 11.0 lbs. Polyester Double Braid x<br />
6 Stable Braid Samson 5/8" (16mm) 16,300 lbs. 3,260 lbs. 14.0 lbs. Polyester Double Braid x x<br />
6 Stable Braid Samson 3/4" (18mm) 20,400 lbs. 4,080 lbs. 18.0 lbs. Polyester Double Braid x x<br />
6 Tenex-TEC Samson 3/8" (9mm) 6,100 lbs. 1,200 lbs. 4.3 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex-TEC Samson 1/2" (12mm) 13,100 lbs. 2,600 lbs. 10.0 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex-TEC Samson 5/8" (16mm) 18,800 lbs. 3,800 lbs. 14.8 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex-TEC Samson 3/4" (18mm) 24,800 lbs. 5,000 lbs. 19.2 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex Samson 3/8" (9mm) 5,800 lbs. 580 lbs. 4.2 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex Samson 1/2" (12mm) 11,800 lbs. 1,180lbs. 8.5 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex Samson 5/8" (16mm) 17,100 lbs. 1,710 lbs. 13.1 lbs. Polyester 12-Strand Hollow Braid x<br />
6 Tenex Samson 3/4" (18mm) 22,400 lbs. 2,240 lbs. 17.2 lbs. Polyester 12-Strand Hollow Braid x<br />
6 AmSteel Black• Samson 1/4" (6mm) 7,400 lbs. 1,480 lbs. 1.6 lbs. Dyneema 12-Strand Hollow Braid x<br />
6 AmSteel Blue Samson 3/8" (9mm) 19,600 lbs. 3,920 lbs. 3.6 lbs. Dyneema 12-Strand Hollow Braid x<br />
7 Arbor-Plex Samson 5/8" (16mm) 9,000 lbs. 1,800 lbs. 12.0 lbs. Polyester 12-Strand Single Braid x x<br />
7 Arbor-Plex Samson 3/4" (18mm) 12,000 lbs. 2,400 lbs. 16.2 lbs. Polyester 12-Strand Single Braid x x<br />
7 Pro-Master Samson 1/2" (12mm) 6,300 lbs. 1,300 lbs. 6.5 lbs. Poly Blend 3-Strand Twisted x x<br />
7 Pro-Master Samson 5/8" (16mm) 8,500 lbs. 1,700 lbs. 9.6 lbs. Poly Blend 3-Strand Twisted x x<br />
7 Pro-Master Samson 3/4" (18mm) 10,900 lbs. 2,200 lbs. 13.9 lbs. Poly Blend 3-Strand Twisted x x<br />
7 Treeline New England 5/8" (16mm) 8,600 lbs. 860 lbs. 11.0 lbs. Poly Blend 12-Strand Single Braid x x<br />
7 Treeline New England 3/4" (18mm) 12,200 lbs. 1,220 lbs. 15.0 lbs. Poly Blend 12-Strand Single Braid x<br />
7 Rigger’s Choice Pelican 5/8" (16mm) 15,320 lbs. 1,532 lbs. 12.0 lbs. Polyester Double Braid x x<br />
7 Rigger’s Choice Pelican 3/4" (18mm) 25,730 lbs. 2,573 lbs. 16.6 lbs. Polyester Double Braid x x<br />
Fire and Rescue Fall Protection<br />
Average Weight Cover Available Length<br />
Page <strong>Rope</strong> Manufacturer Size Strength WLL Per 100' Material Construction 100' 120' 150' 200' 600'<br />
8 Rescue <strong>Rope</strong> Pelican 7/16" (11mm) 6,900 lbs. 690 lbs. 6.4 lbs. Polyester Kernmantle x x<br />
8 Rescue <strong>Rope</strong> Pelican 1/2" (12.5mm) 10,500 lbs. 1,050 lbs. 8.7 lbs. Polyester Kernmantle x x<br />
• These ropes are available with a factory splice in 150' lengths