Mini clamping system 4000 N - kopal

2.5
7.5
B
10.5
7.5
5
20
KOPAL
4000 NEWTON
The mini clamping system with tightening via
eccentric, resulting in a very low space
requirement.
The eccentric ensures precise, fast and powerful
clamping (4000 N).
With a height of less than 6 mm and a width of
20 mm, the plate clamps leave a maximum of space
for tool clearance.
HORIZONTAL MINI-CLAMPING
MINI-CLAMP SYSTEM
Multi-Clamping
Low clamping
High clamping
Compact
Ultra-quick clamping
High clamping power
Cylindrical parts
Clamp (1 single rigid stop)
Firmly presses the workpiece
onto the stops.
Single stop (1 single rigid stop)
2 stops are necessary to position a
workpiece along an axis.
Double stop (2 rigid stops)
1 stop is sufcient to position
a small workpiece along an axis.
Clamping force :
Clamping torque :
Clamping range :
6000 N
9 N.m
1.2 mm
Using the eccentric
Clamp-slot for T-slot tables
Clamp-slot
Equipment includes :
1 clamping element
1 stop element
for slots : A B Ref.
10 mm 46 18 25-260
12 mm 48 18 25-262
14 mm 52 22 25-264
16 mm 48 25 25-266
18 mm 48 25 25-268
70°
30°
Fast 1/4 turn clamping
15
15
SW 4
4
Workpiece supported on the table or raised with a wedge.
(for through-hole machining)
A
1.2
A

HORIZONTAL MINI-CLAMPING
4000 NEWTON
KOPAL
Mini-clamping for specific assembly
Clamping elements
Ref.
The moving clamp/locators pivot around an eccentric
axis, which carries out the clamping. They can clamp
in all directions.
Pillar-type moving clamp/locator 25-210
clamping height 2.5 mm
Raised pillar-type moving clamp/locator 25-215
clamping height 7.5mm
Clamping key (sold sepatately) 25-980
T-shaped, 4mm hexagonal
25-210 25-215
25-105
25-110
Stops
Ref.
Ground xed stops are xed in position with special
screws ensuring high precision mounting.
Fixed clamp/locator 25-105
clamping height 2.5 mm
Double xed clamp/locator 25-110
clamping height 2.5 mm
25-115
25-120
Raised xed clamp / locator 25-115
clamping height 7.5 mm
Raised double xed clamp / locator 25-120
clamping height 7.5 mm
25-125
25-130
The ground swivel xed stops are held in position with
special screws ensuring high precision mounting.
Swivel xed clamp-locator 25-125
clamping height 2.5 mm
Raised swivel xed clamp / locator 25-130
clamping height 7.5 mm
15.0
2 holes
15.0
1 hole
15.0
1 hole
Ø 4.2 H7
depth 3.5
M 4
depth 12.0
Ø 8.0 H7
depth 6.0
M 6
depth 14.0
Ø 12.0 H7
depth 18.5
minimum
The distance of 15.0
is reduced to 14.0 for
elements with round grinding.
Fixed
clamp-locator
2.5
5
2.5
20
25-115
25-105
15
22
10
5
6.5
18
25
Double xed
clamp-locator
2.5
5
2.5
25
25-120
25-110
15
22
10
5
18
6.5
Swivel xed
clamp-locator
2.5
5
2.5
20
25-130
25-125
15
25
10
5
Moving
clamp-locator
2.5 5 2.5
20
25-215
25-210
15
25
5 10
5