Locca Multi User and Installation Guide

Other menu options
Range settings
The Locca system has a built-in patent-pending
range setting system that allows the installer to
set up in seconds the different ranges that each
receiver will receive signals from the keys.
Key Point
This is major feature of the Locca system and
one of the reasons the system is so versatile.
This means that one Locca Remote Key can
be programmed into multiple Locca Receivers
in a building/area. The Locca Remote Key will
then only operate the Receiver that it is
programmed to work near to.
One Locca Remote Key can therefore be
programmed into an infinite number of receivers
(i.e. different doors in a building, garages, front
doors, gates, barriers etc.)
Setting the time delay function
Please Note: The Time Delay function is
the amount of time the electric door release
will remain unlocked (i.e. the amount of time
the relay is triggered). This can be cancelled
before the delay period ends with a second
press of the Locca Key.
Setting default sound
There are three sound functions that can be
tailored for each account:
i. Full Sound
ii. Beep
iii Sound off
Setting Language
Set the language to the territory that you require.
The range settings are as follows:
i. Full Range (around 40 metres)
ii. Medium Range (around 15 metres)
iii. Medium Short Range (around 5 metres)
iv. Short Range (around 1.5 metres)
Please note: these ranges can vary depending
on the situation: interference, materials etc.
6 | Locca Multi User Guide