HiQnet Third Party Programmers Guide - Architectural Media Systems
HiQnet Third Party Programmers Guide - Architectural Media Systems
HiQnet Third Party Programmers Guide - Architectural Media Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>HiQnet</strong> <strong>Third</strong> <strong>Party</strong> Programmer Documentation<br />
1 Overview<br />
1.1 References<br />
1.2 Scope<br />
This document provides the publicly available means for controlling <strong>HiQnet</strong><br />
products. Included are the following:<br />
<br />
<br />
<br />
<br />
<br />
<strong>HiQnet</strong> product architecture<br />
All formatting of messages<br />
Network specific information for implemented transports<br />
Open-loop and closed loop control methodologies<br />
Examples utilizing System Architect to facilitate message formation<br />
Although examples are given using specific Devices, detailed documentation is<br />
not provided for every <strong>HiQnet</strong> Device. Instead, methods of using System<br />
Architect to glean that information are provided. It is assumed that readers are<br />
familiar with System Architect, the basics of Ethernet networking, and RS232.<br />
Note that it is not intended that third-party control Devices implement all of the<br />
methods detailed in this document. It is assumed that in most cases only a subset<br />
of these messages will be implemented. Some of the information presented is for<br />
explanatory reasons only, such that a person desiring to control a <strong>HiQnet</strong> Device<br />
may understand the underlying behavior. Lastly, control of USB products is<br />
beyond the scope of this document.<br />
© HARMAN 19 February 2013<br />
Page 6 of 91