scorpa tys 125 f
scorpa tys 125 f
scorpa tys 125 f
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SCORPA S.A. USER MANUAL<br />
2. Lift the wheel up within the two front fork arms, and make sure the brake disk<br />
is situated within the brake pads.<br />
3. Thread the wheel axle through the two front fork arms, the speedometer<br />
mechanism, and the wheel hub.<br />
4. Tighten the axle to the recommended torque: 30 Nm (3,0 m.Kgf).<br />
5. Tighten the screws on the bottom of the front fork arms.<br />
6. Connect the speedometer cable with its mechanism on the wheel-axle.<br />
Rear wheel removal:<br />
1. Loosen the wheel axle nut.<br />
2. Turn the two chain tension eccentrics in the direction which allows the wheel to<br />
move towards the front of the bike.<br />
3. Lift the rear wheel, by using a raising stand or by putting a jack under the<br />
engine protection. Take care the bike is stalled enough to prevent it from<br />
overturning.<br />
4. Remove successively the axle nut and the axle.<br />
5. Make the wheel move to the front of the bike, and remove the chain from the<br />
rear sprocket.<br />
6. Remove the rear wheel from the swinging arm.<br />
SCORPA TYS <strong>125</strong> F 53
Change language