Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MS BOLT ACCESSORIES<br />
8650<br />
4015<br />
4085<br />
4089<br />
MS4043<br />
MS1880<br />
1870 1877<br />
ADAMS RITE<br />
6<br />
4015 Threshold Bolt<br />
Adding the 4015 Threshold Bolt to a pivoted bolt MS deadlock allows maximum security<br />
for pairs of doors by the turn of a single key. The two-point lock secures the<br />
entire double door entrance.<br />
Item<br />
4015-18-A<br />
Description<br />
Zinc<br />
Additional cost for cylinder height over 53”<br />
4085 Header Bolt<br />
4085 was designed to add a top-of-door third locking point for pairs of doors with<br />
a MS pivoted bolt deadlock and 4015 threshold bolt in the active leaf. It saves the<br />
keyholder from the difficulty of lining up the doors with three separate strikes.<br />
Item<br />
4085-01-IB<br />
4085-02-IB<br />
Description<br />
Up to 7’ Door Height, Inactive Leaf<br />
7’1” - 10” Door Height, Inactive Leaf<br />
4089 Exit Indicator<br />
Provides unmistakable notification to building occupants of an exit’s “locked” or<br />
“open” condition. Includes permanently adhesive header sign that reads “This Door<br />
Must Remain Unlocked During Business Hours”.<br />
Item<br />
4089-01-A<br />
4089-01-B<br />
Description<br />
Exit indicator and Sign, Satin Aluminum<br />
Exit indicator and Sign, Bronze<br />
MS4043 Cylinder Guard<br />
MS4043 offers superior protection against burglary. It is made with a heavy steel<br />
plate making unwanted entry impossible.<br />
Item<br />
MS4043-00-A<br />
MS4043-00-B<br />
Description<br />
1/8” Stile Wall, 5 or 6 Pin, Aluminum<br />
1/8” Stile Wall, 5 or 6 Pin, Dark Bronze<br />
Replaces<br />
4501 & 4502<br />
4901 4902<br />
4901 & 4902 Series Deadlatch Strikes<br />
Designed for use in conjunction with 4300, 4500, 4700 or 4900 Series deadlatches,<br />
these strikes offer a choice of mounting methods: a back-up mounting plate is included<br />
to allow installation flush in a hollow section jamb. All strikes are unhanded<br />
and include stainless steel finish plate and molded black plastic dust box.<br />
Item Description Finish<br />
4901-01-A Long Type Strike, Flat, With Dust Box/Mounting Plate 630<br />
4901-01-B Long Type Strike, Flat, With Dust Box/Mounting Plate 313<br />
4901-02-A Long Type Strike, Radiussed, With Dust Box/Mounting Plate 630<br />
4901-02-B Long Type Strike, Radiussed, With Dust Box/Mounting Plate 313<br />
4902-01-A Short Type Strike, Flat, With Dust Box/Mounting Plate 630<br />
4902-01-B Short Type Strike, Flat, With Dust Box/Mounting Plate 313<br />
4902-02-A Short Type Strike, Radiussed, With Dust Box/Mounting Plate 630<br />
4902-02-B Short Type Strike, Radiussed, With Dust Box/Mounting Plate 313<br />
8650 Escutcheon<br />
Required to mount any standard mortise cylinder on concealed rod exit devices.<br />
Item Description Finish<br />
8650-A Escutcheon Aluminum<br />
8650-B Escutcheon Bronze<br />
1870 Cylinder Operated Flushbolt Series<br />
Designed for use instead of conventional flip-lever operated flushbolts, the 1870<br />
gives building management key control of the inactive leaf of paired doors. Recommended<br />
for installation at both top and bottom of inactive door with MS1851A<br />
in active door for greatest security. Use 1877-A for wood doors.<br />
Item Description Faceplate Finish<br />
1870-30-A 1-1/8” Backset Flat Aluminum<br />
1870-30-B 1-1/8” Backset Flat Dark Bronze<br />
1877-A 1-1/4” Backset Flat Aluminum<br />
MS1880 Two Way Bolt with Indicator<br />
The MS1880 bolt offers greater convenience: one operation instead of two. An aluminum-letters-on-red<br />
indicator notifies occupants that the door is locked. Operated<br />
in conjunction with any pivoted bolt MS deadlock. MS cannot be unlocked when<br />
pivoted bolt is in locked position.<br />
Item Description Finish<br />
MS1880 Hourglass, Two Guides Chrome<br />
For cylinder height over 53” and/or door height an additional fee applies.<br />
Indicate cylinder and door height.<br />
4036<br />
4000 4001<br />
4036<br />
Deadbolt Strikes<br />
4000 Trim Strike is a simple strike plate that can be surface mounted on a wood<br />
or metal jamb or mortised flush. Furnished with wood and machine screws.<br />
4001 Box Strike has the same trim plate as the 4000 but with dust box added. Customarily<br />
used only for wood construction where the dust box prevents chips, sawdust<br />
and other debris from entering the strike. Furnished with wood and machine<br />
screws. MS4002 Armored Strike has the same trim plate as 4000 and 4001, but<br />
backed up by a massive steel doubler designed to prevent the method of forced<br />
entry known as “jamb peeling.” Fits within aluminum or other hollow jamb sections<br />
with trim face flush, the steel completely hidden. Available flat or radiused, for pairs<br />
of doors (can be used with two-point and three-point MS locks), and to fit all MS<br />
deadbolts including the hookbolt version in sliding doors.<br />
Item<br />
Description<br />
4000 Series Trim Strike Satin AL, Bronze or Black Anodized<br />
4001 Series Trim & Box Strike<br />
MS4002 Armored Trim Strike<br />
MS4002<br />
4036 & 4066 Cylinders<br />
4036 mortise cylinder is designed to operate any Adams Rite lock or latch requiring<br />
a mortise cylinder.<br />
4066 mortise thumbturn can be used without keys to operate latch or lock.<br />
Item Description Finish<br />
4036-A Mortise Cylinder Aluminum<br />
4066-A 1” Mortise Thumbturn Aluminum<br />
Michigan 800-522-2940 • North Carolina 800-768-6050 • Texas 877-347-5117
Change language