How to Scribe a Countertop - LE Smith
How to Scribe a Countertop - LE Smith
How to Scribe a Countertop - LE Smith
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 5:<br />
Set a pencil compass <strong>to</strong> it’s widest distance.<br />
Without moving the counter<strong>to</strong>p, place the point<br />
of the compass on the wall and the pencil on<br />
the backsplash. Run the compass along the<br />
entire length of the counter<strong>to</strong>p.<br />
Step 6:<br />
Place the counter<strong>to</strong>p back on<strong>to</strong> the saw horses, again with the laminate<br />
side facing up. Precisely sand the pine stick and laminate up <strong>to</strong> the line you<br />
drew with the compass, while conserving the angle you sanded previously<br />
in step two. Be sure you are sanding so that the belt on the sander is<br />
cutting <strong>to</strong>ward the pine stick. By doing this, you will avoid chipping the<br />
laminate surface.<br />
Step 7:<br />
Now that your scribing is complete, place the counter<strong>to</strong>p back on the<br />
cabinet. Look for any gaps. If there are gaps, fill them in with caulk that<br />
matches the color of your laminate counter<strong>to</strong>p.<br />
Your scribing is complete!<br />
You are now ready <strong>to</strong> install your brand new counter<strong>to</strong>p!<br />
<strong>How</strong> <strong>to</strong> <strong>Scribe</strong> Your New Counter<strong>to</strong>ps - www.lesmith.com