SERVO-DRIVE for AVENTOS HK

More documents

Recommendations

Info

Power supply set C Set includes: ■ Power supply ■ Wall mount bracket ■ Three-prong power cord ■ Cable connector ■ Cable end protector (qty 3) ■ Cable clips (qty 10) ■ 19' universal cable ■ Technical information Power supply set Part no. Z10NE02UG10 15
Electrical components SERVO-DRIVE power supply Components Supplies power to the drive units ■ UL certified ■ Can power up to 18 drive units ■ Connect to switched GFCI outlet ■ Cable length six feet NOTE: Three-prong power cord required Specifications Input specifications Input voltage Input frequency Input current Inrush current Protection class Earth leakage current Power factor 100-240 VAC 50-60 Hz 2.00 A 100 A maximum at 230 VAC Class I 1.5 mA maximum compliant with EN61000-3-2 General specifications Efficiency 85% typical Isolation 3000 VAC input to output, 2000 VAC input to groud — negative output is connected to ground Switching frequency 60 kHz ± 10 kHz Output specifications Output voltage 24 VDC Output power max. 100 W Minimum load none Load regulation 2% Ripple and noise 1% peak-to-peak maximum measured with additional external capacitors at output: 0.1 µF and 10 µF (electrolytic capacitor) Over voltage protection Overload protection Short circuit protection at 33 VDC 120-150% hiccup trip and restart mode with auto recovery continuous Environmental information Operating temprature 32 °F to 149 °F Storage temperature -4 °F to 185° F Protection IP40 Space requirements and safety distance for power supply A safety distance of 30 mm must be maintained for air circulation. Subject to technical modifications without notice. © 2011 16
Page 1: SERVO-DRIVE for AVENTOS HK C A B B

SERVO-DRIVE for AVENTOS HK

Create successful ePaper yourself

Delete template?

Save as template?