Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HEATER<br />
On<br />
• Turn ON DC MAIN breaker on the<br />
DC panel.<br />
• Turn ON the HEATER breaker on the<br />
DC panel.<br />
• Be certain that the propane is on.<br />
On the thermostat, move the white<br />
switch on the bottom to the right for<br />
ON.<br />
• Set thermostat to desired<br />
temperature.<br />
• The fan will come on and run for 2-5<br />
minutes before you feel heat come<br />
out of the vents.<br />
• Turn OFF HEATER breaker at DC<br />
panel.<br />
• The fan will continue to run for 2-3<br />
minutes after you have shut down<br />
the heating system.<br />
NOTE: The fan draws a lot of DC<br />
power. You must run the generator<br />
whenever you run the heater. Be<br />
sure to have the Battery Charger<br />
breaker ON.<br />
• Generator should be running with<br />
battery charger on as the heater<br />
draws a lot power from the battery.<br />
Off<br />
• At thermostat, move white switch at<br />
button to OFF.<br />
COMMON TROUBLESHOOTING<br />
PROBLEM POSSIBLE CAUSES REMEDIES<br />
Heater won’t light<br />
Heat pump won’t<br />
work<br />
DC main is Off<br />
Heater breaker is off<br />
Thermostat is off<br />
Low battery<br />
Thermostat not set to<br />
heat.<br />
Breaker not turned on.<br />
Turn on DC MAIN<br />
Turn on the HEATER<br />
breaker<br />
Turn on the thermostat<br />
Charge the battery<br />
Set control to heat setting.<br />
Turn breaker on.<br />
21