MSDS - Bioneer

To the best of our knowledge, the chemical, physical, and toxicological propertied have not been thoroughlyinvestigated.Indication of any immediate medical attention and special treatment needed : N/A5. Fire fighting measuresSuitable extinguishing mediaUse water spray, alcohol-resistant foam, dry chemical or carbon dioxide.Special hazards arising from the substance or mixture : N/AAdvice for fire fighters : Wear self contained breathing apparatus for firefighting if necessary.Further information : N/A6. Accidental release measuresPersonal precautions, protective equipment and emergency proceduresAvoid breathing vapors, mist or gas. Ensure adequate ventilation.Environmental precautionsPrevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environmentmust be avoided.Methods and materials for containment and cleaning upPick up and arrange disposal without creation dust. Sweep up and shovel. Keep in suitable, closedcontainers for disposal7. Handling and storagePrecautions for safe handlingAvoid all direct contact and wear protective clothing, respirator, goggles, gloves.Provide appropriate exhaust ventilation at places where dust is formed.Conditions for safe storageStore in a cool place. Keep container tightly closed in a dry and well-ventilated place.Recommended storage temperature : below -10 °C8. Exposure controls/personal protectionControl parameters : Components with workplace control parametersExposure controlsAppropriate engineering controls : Handle in accordance with good industrial hygiene and safety practice.Wash hands before breaks and at the end of workday.Personal protective equipmentEye/Face protection : Use equipment for eye protection tested and approved under appropriate governmentstandards such as NIOSH(US) or EN 166(EU)Skin protection : Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal (withouttouching glove’s outer surface) to avoid skin contact with this product. Dispose ofcontaminated gloves after use in accordance with applicable laws and good laboratorypractices. Wash and dry hands. The selected protective gloves have to satisfy thespecifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.Body protection : Choose body protection in relation to its type, to the concentration and amount of dangeroussubstances, and to the specific work-place. The type of protective equipment must be2www.bioneer.comBQ-042-101-06Revision : 0(2012-11-29)