EQUIPMENTS FOR LIQUID CHROMATOGRAPHY

HPLC2007 - 2008EQUIPMENTS FOR LIQUID CHROMATOGRAPHYwww.chromatography-hplc.com ISO 9001:2000

HPLC SYSTEMSSE01Isocratic Analytical SystemSystem contains:P/NALPHA 10 Isocratic PumpPE000000OPAL UV-VIS Fixed Wavelength 6500000Interference filterof choiceAnalytical Injection Loop Valve D UNI 54500000External sample loop 20 µl SS 54293000Column 250x4.6mm Kromasil 100-7 µm C18 CO-C25A7Box for Bottles MF1ZA000000Mobil phase reservoir LCT 02, 1L 56940000SS Mobile Phase Filter 2 µm, 1/8"JR-367008-2705NR 50 µl Hamilton Syringe 80565ECOMAC Chromatographic software AF0000002x Crossed serial cable 9pin RS 232 EKAB-0242x Cable with converter RS232 - USB EKAB-025Panda 30 Start+Mark -USBSA020000Accessories for analytical systemSE010100High effective system for routine analysis by constant flow rate of mobilephase (0.01 - 10 ml/min) at one wavelength given used interference filter.Sample is injected using manual injector, controlling and record of analysisis done by Chromatographic software ECOMAC.SE01 Isocratic Analytical SystemP/N: SE010000SE03Gradient Analytical SystemSystem contains:P/NBETA 10 Gradient PumpPC000000SAPPHIRE 800 UV-VIS Variable Wav. Detector 67000000Column oven LCO 102 SINGLE 64000000Degasser DG 3014 on-line, four channels 49000000Analytical Injection Loop Valve D UNI 54500000External sample loop 20 µl SS 54293000Column 250x4.6mm Kromasil 100-7 µm C18 CO-C25A7Box for Bottles MF1ZA0000003x Mobil phase reservoir LCT 02, 1L 569400003x SS Mobile Phase Filter 2 µm, 1/8" JR-367008-2705NR 50 µl Hamilton Syringe 80565ECOMAC Chromatographic software AF000000Clarity - Station for 1 instrumentC50A/D Converter Board INT7, 1 channel I71LC Direct Control of LC Pumps Clarity A243x Crossed serial cable 9pin RS 232 EKAB-0243x Cable with converter RS232 - USB EKAB-025Panda 30 Start+Mark -USBSA020000Accessories for analytical systemSE010100High effective system for sophisticated analysis by constant flow rate0.01 - 10 ml/min at wavelengths 190 up to 800 nm allow: gradient elution,wavelength changing during analysis, continual mobile phase degassing,column temperature stabilization, manual sample injecting using loop injector.Analysis controling, recording and evaluation is provided using Clarity withLC Direct control and A/D converter.Controlling of analysis is possible to provided by means ofChromatographic software ECOMAC too.SE03 Gradient Analytical SystemP/N: SE0300002

HPLC SYSTEMSSE02Isocratic Preparative SystemSystem contains:P/NALPHA 100 Isocratic PumpPH000000TOPAZ Dual UV Detector73E000000Inject system for valve B (set) 54107001Preparative Injection Valve B UNI 54900000External sample loop 1 ml SS 54298000Box for Bottles MF1ZA000000Mobil phase reservoir LCT 02, 1L 56940000SS Mob Phase Filter 25 µm 1/8"Pipe OD JR-3678-25PEEK Union 1/8" (1/4"-28) without Fittings JR0652x PEEK Nut 1/8", 1/4"-28 threads 000004502x KEL-F Ferrule 1/8" 00000470ECOMAC Chromatographic software AF0000002x Crossed serial cable 9pin RS 232 EKAB-0242x Cable with converter RS232 - USB EKAB-025Panda 30 Start+Mark - USBSA020000Accessories for preparative systemSE020100It is ideal system for preparative and flash chromatography by constantflow rate of mobile phase (0.1 - 100 ml/min). Detection at two wavelengthssimultaneously allow verification of separated sample. Manual sampleinjection is provided using Valve B, system controlling and recording ofanalysis is done by means of ECOMAC chromatographic software.SE02 Isocratic Preparative SystemP/N: SE020000SE04Isocratic Analytical System with Variable DetectorSystem contains:P/NALPHA 10 Isocratic PumpPE000000SAPPHIRE 600 UV-VIS Variable Wav. Detector 67SH000000Analytical Injection Loop Valve D UNI 54500000External sample loop 20 µl SS 54293000Column 250x4.6mm Kromasil 100-7 µm C18 CO-C25A7Box for Bottles MF1ZA000000Mobil phase reservoir LCT 02, 1L 56940000SS Mobile Phase Filter 2 µm, 1/8"JR-367008-2705NR 50 µl Hamilton Syringe 80565ECOMAC Chromatographic software AF0000002x Crossed serial cable 9pin RS 232 EKAB-0243x Cable with converter RS232 - USB EKAB-025Panda 30 Start+Mark - USBSA020000Accessories for analytical systemSE010100High effective system for routine analysis by constant flow rate of mobilephase (0.01 - 10 ml/min) at variable wavelength from 190 up to 600 nm. Itis possible to pre-set wavelength change during analysis. Sample is injectedusing manual injector, controlling and record of analysis is done byChromatographic software ECOMAC.SE04 Isocratic Analytical System with Variable DetectorP/N: SE0300003

PUMPSALPHA 10 Isocratic PumpThis pump is suited for analytical applications in liquid chromatography.A flow rate is 0.01 - 10 ml/min and a pressure limit is 40 MPa. It is designedwith main and auxiliary pump heads connected in series with a pistondiameter of 1/8".Alpha 10 has a quite innovative concept of electronic control, pump drive,piston suspension, cams shape, pressure transducer and check valves.ALPHA 10 Isocratic PumpP/N: PE000000ALPHA 50 and ALPHA 100 Isocratic PumpThese pumps are suited for semi-preparative and preparativeapplications in liquid chromatography. ALPHA 50 is possible to also use foranalytical applications because it has very stable operation at low flow rates.It is designed with two parallel connected pump heads (piston diameteris 3/8").Alpha 50 and Alpha 100 has a quite innovative concept of electronic control,pump drive, cams shape and pressure transducer.ALPHA 50 Isocratic Pump (flow rate 0.05 - 50 ml/min, max. pressure 30 MPa)ALPHA 100 Isocratic Pump (flow rate 0.1 - 100 ml/min, max. pressure 15 MPa)P/N: PF000000P/N: PH000000KAPPA 10 Isocratic One Piston PumpSingle piston pump with flow rate 0.01 - 10 ml/min and limit of pressure40 MPa is suited for washing process of chromatographic columnsin HPLC. It is designed with piston diameter of 1/8".Quite new concept of electronic and pump drive allow to useit as standalone unit, just as in PC controlled systems. New pistonsuspensions and its easy replacement prolong working life and simplifymaintenance.KAPPA 10 Isocratic One Piston PumpP/N: PK000000BETA 10 Gradient PumpWith a flow rate of 0.01 - 10 ml/min and a pressure limit of 40 MPa, thispump is suited for analytical applications in liquid chromatography.It is designed with main and auxiliary pump heads connected in series witha piston diameter of 1/8".Beta 10 has a quite innovative concept of electronic control, pump drive,piston suspension, cams shape, pressure transducer and check valves.BETA 10 Gradient PumpP/N: PC000000BETA 50 Gradient PumpWith a flow rate 0.05 - 50 ml/min and a pressure limit of 30 MPa, this pumpis suited for semi-preparative applications in liquid chromatography. Dueto its very stable operation at low flow rates, it is also possible to use thepump for analytical applications. It is designed with two parallel connectedpump heads (piston diameter is 3/8").Beta 50 has a quite innovative concept of electronic control, pump drive,cams shape and pressure transducer.BETA 50 Gradient pumpP/N: PD0000004

SAPPHIRE UV-VIS Variable Wavelenght DetectorDETECTORSis a detector with continuously variable wavelength in the range of190 - 800 nm (190 - 600 nm) and a noise level ± 0.5 x 10 -5 AU.The unit may be used for routine analytical chromatography as well as forpreparative chromatography, according to the selected cell.The unit is easy to operate, reference and sample signals are available fordetector diagnostics as well as information on lamp operating hours.Output signal is available in both digital and analogue form on the outputconnector. It is possible to control the unit using the keypad or an RS232interface. Connecting capillaries are led from the detector's right side panel.The detector is equipped with a high standard deuterium lamp in a special socket that enables easy changing.Wavelength can be programmatically changed during the performance of an analysis. The detector performsautomatic wavelength calibration after the lamp has been switched on. A HPLC 04 analytical cell is includedas a component of the detector.SAPPHIRE 800 UV-VIS Variable Wavelength Detector (190 - 800 nm) P/N: 67000000SAPPHIRE 600 UV-VIS Variable Wavelength Detector (190 - 600 nm)P/N: 67SH000000APPLICATIONS:SAPPHIRE CE for Capillary electrophoresisSAPPHIRE EXTERNAL CELL with optical connectors for fiber optic connectionsP/N: 67CE000000P/N: 67EX000000OPAL UV-VIS Fixed Wavelenght Detectoris a detector with an interference filter. By means of this filter and deuteriumlamp spectrum can be this unit adjusted at one fixed wavelength in rangeof 190 - 800 nm. Noise level at 254 nm is ± 0.5 x 10 -5 AU with an empty cell.The unit may be used for routine analytical chromatography as well as forpreparative chromatography, according to the selected cell.The unit is easy to operate, reference and sample signals are available fordetector diagnostics as well as information on lamp operating hours.Output signal is available in both digital and analogue form on the outputconnector. It is possible to control the unit using the keypad or an RS232interface.OPAL UV-VIS Fixed Wavelength Detector (190 - 800 nm) P/N: 65000000APPLICATIONS:OPAL EXTERNAL CELL with optical connectors for fiber optic connectionsP/N: 65EX000000OPAL VIS Fixed Wavelength Detector with LED (360 - 900 nm)P/N: 65LD000000For VIS applications we offer OPAL VIS Fixed Wavelength Detector with LED, where is used LED diode as lightsource instead deuterium lamp. Thanks higher light energy it has lower noise.TOPAZ Dual UV Detectoris a new type of UV detector, which allows measuring absorbance of twowavelengths simultaneously in one cell in range 200 - 320 nm (increments1 nm). This unit is used in liquid chromatography to verify analyzed samplesby means of a second wavelength or in situations when some peaks absorbon different wavelengths. It is possible to use the detector in analytical,preparative or flash applications by using different cells. Noise level at254 nm is ±1x10 -4 AU with an empty cell.The unit is easy to operate, reference and sample signals are available fordetector diagnostics as well as information on lamp operating hours.Output signal is available in both digital and analogue form on the outputconnector. It is possible to control the unit using the keypad, externallogic signals or an RS232 interface.TOPAZ Dual UV Detector (200 - 320 nm)APPLICATIONS:TOPAZ Dual UV Detector External Cell with optical connectors for fiber optic connectionsP/N: 73E000000P/N: 73EX0000005

LCD 2073A Dual UV DetectorThis unit has the same features as the TOPAZ Dual UV Detector but it doesnot have a keypad and display thus it is possible to control it by usingexternal logic signals or an RS232 interface only.LCD 2073A Dual UV DetectorP/N: 73A000000FLASH 06 SINGLE and DUAL Detectoris an OEM build-in detector with one interference filter (FLASH 06 SingleDetector) or two interference filters (FLASH 06 Dual Detector).The FLASH 06 Dual Detector makes to possible measuring of twowavelenghs simultaneously.Detector can be adjusted using interference filter at one or two fixedwavelength in range of 200 - 600 nm. Noise level at 254 nm is ± 2 x 10 -5 AUwith an empty cell.High standard deuterium lamp in a special socket enables easy changing.Lamp work hours are counted using the built-in counter.This unit is used in liquid chromatography in flash and preparativeapplications. By using analytical cell can be detector used also for analyticalpurpose. The cell is easy to replace from the side of the detector.The unit is designed as build-in unit with 24 V power supply and RS 232controlling. On request can be sold in classical case with 230/115 V powering.FLASH 06 Single Detector P/N: 2048000000FLASH 06 Dual Detector P/N: 2047000000FLASH 06 DAD Detectoris an OEM build-in type of UV diode array detector (DAD), which allowsmeasuring absorbance of four wavelengths simultaneously in one cell justas measuring of whole spectrum (scan). Scan of whole spectrum ispossible in each time.This unit is used in liquid chromatography to verify analyzed samples bymeans of four wavelengths or in situations when some peaks absorb ondifferent wavelengths. It is possible to use the detector in flash andpreparative applications. By using analytical cell can be detector used alsofor analytical purpose. The cell is easy to replace from the side of thedetector.Noise level at 254 nm is ± 5 x 10 -5 AU with an empty cell.Wavelength setting is from 200 up to 400 nm in increments of 1 nm.Lamp work hours are counted using the built-in counter.The unit is designed as build-in unit with 24 V power supply and RS 232controlling. On request can be sold in classical case with 230/115 V powering.FLASH 06 DAD Detector P/N: 204600006

Shodex RI-101 Refractive Index Detector analyticalDifferential Refractive Index Detectors are used for detecting littleor no UV active samples such as sugars or polymers. The Shodex RI-101,employs a number of improvements for shortening the time forstabilization. By using a micro-processor it is capable of automatic start-upfrom eluent replacement to checking the base-line stabilization. Thedetector is fitted with external input and output terminals as wellas RS232C communication ports, permitting advanced automationby linking the detector with various HPLC systems, enabling advancedautomation by combining the detector with various chromatographs.Main features:- superior base line stability- intuitive operating using- easily overview of operational conditions and baseline trend- automatic start-up function for reference cell filling and baseline stabilization checking- HELP function for easy validation and calibration- control mode (by keypad, or RS232)- optimized temperature control method guarantee quick base line stabilization- leak sensor stop the pump by solvent leakage- various automated functionShodex RI-101 Refractive Index Detector analyticalP/N: F4010101We produce several types cells for our detectors:CELLS FOR DETECTORSAnalytical cells Preparative cells Microcells Test cellsHPLC 04, PLCC 04, PLCC 05, PLCC 08, PLCC 09, PLCC 11, MLCC 02, ZK02, ZK03,HPLC 08 PLCC 13, PLCC 14, PLCC 15, PLCC 3L, PLCC 20 MLCC 03 ZK 04Cells type A - occurrence in detectorsl (mm) V (µl) OD Vm (ml/min) Sapphire Opal LED LCD 2084 LCD 2083HPLC 04 5 10 1/16" 10 x x x xPLCC 04 0.3* 40** 1/16" 200 x x x xPLCC 05 0.3* 40** 1/8" 500 x x x xMLCC 02 0.8 0.5 1/16" 5 x x x xZK 02 - - - - x x x xCells type B - occurrence in detectorsl (mm) V (µl) thread OD Vm (ml/min) Topaz Opal LCD 2073 Flash 06 xx LCD 2071.x LCD 2083.4 EX typeHPLC 08 5 10 - 1/16" 10 x x x x x - -PLCC 08 0.1* 40** UNF 10-32 1/16" 200 - - - - - x -PLCC 09 0.1* 40** UNF 10-32 1/16" 200 - - - - x x -PLCC 11 0.1* 40** UNF 1/4"-28 1/8" 500 - - - - x x -PLCC 13 0.3* 40** UNF 1/4"-28 1/8" 500 - - - - x - -PLCC 14 0.1* 40** UNF 1/4"-28 1/8" 500 x x x x - - -PLCC 15 0.3* 40** UNF 1/4"-28 1/8" 500 x x x x - - -PLCC 3L 0.1* 80*** UNF 5/16"-24 3/16" 3000 x x x x - - -PLCC 20 0.1* 150*** NPT 1/4"-18 1/4" 15000 - - - - - - xMLCC 03 0.8 0.5 - 1/16" 5 x x x x x - -ZK 04 - - - - - x x x x - x -ZK 05 - - - - - - - - - x - -l - cell optical path length in mmV - cell volume in µlOD - capillaries or tubing outside diameter- maximal flow rate in milliliters per minuteV m* basic optical path length which can be stepwise prolonged up to 1.1 mm, or 2.4 mm** basic cell volume which expand up to 55 µl, or 70 µl by optical path length extension*** according to the prolonged path lengthAB7

COLUMN OVENS AND CONCENTRATORSLCO 102 Column Oven SerieColumn oven is important to achieve better temperature stability of HPLCcolumns by analysis.Using it we get: - Better reproducibility- Higher separation performance- Reduced analysis timeRange of temperature regulation is from ambient temperature up to 99°C.Actual oven temperature is shown on display. Temperature stability is ± 0.1°C.This unit is great at its small dimensions. The heated part is separatedfrom the controlling unit, allowing it to be easily installed in a chromatographyconfiguration.Setting the required temperature is also made simple by means of arrowbuttons and storing. After the unit is turned off, the oven retains the last usedtemperature in memory and thus there is no need to reenter it during repetitiveanalyses.An independent safety circuit turns the heater off and transmits an acoustic signal when the set temperatureis exceeded by 10°C.The unit is supplied with four types of heated parts with different internal dimensions as follow:Type Discription Dimensions P/NColumn oven LCO 102 SINGLE for one column of 250mm 21 x 23 x 310 mm 64000000Column oven LCO 102 SHORT for one column of 150mm 21 x 23 x 205 mm 64000001Column oven LCO 102 DOUBLE for two columns of 250mm, or one 34 x 27 x 310 mm 64000002column and guard column side by sideColumn oven LCO 102 LONG for column of 250mm and guard column 21 x 23 x 454 mm 64000003TV 10+ TERMOVAP Sample ConcentratorConcentrating of samples is widely used in combination with solid phaseextraction (SPE) in analyses of environmental samples (determinationof polycyclic aromatic hydrocarbons, biphenyls, chlorophenols, pesticides,etc.). It is used method of concentrating dissolved samples by solventevaporation using introduction of controlled gas flow above the level of thesolution with temperature control.Main features:- simultaneous treatment of up to twelve samples- gas supply to each vial equipped with a valve- easy handle- height adjustable gas distribution part- usually are used 10 ml reactions vials with conical bottom (P/N: 099451)- for smaller and non standard vials are supplied reductions- Termovap is equipped by safety fuse „ +10°C "- unit is controlled by keyboard or using RS232- concentrating with temperature control and gas introduction above solution surfaceTV 10+ TERMOVAP Sample ConcentratorP/N: TV100000EV 01 EVAP Sample ConcentratorThis is a sample concentrator used for concentrating up to 12 samplessimultaneously by the evaporation of a solvent by blowing a controlledflow of gas over a solution surface at ambient temperature. Vials arelocated in a stand manufactured according to each customer's individualrequest; there is also a valve and a needle above each of the vials servingas the gas inlet. Distribution of gas is height adjustable and can easilybe connected to the reduction valve of a gas cylinder by silicon tubing.EV 01 EVAP Sample Concentrator P/N: 576000008

VIALS and ACCESSORIES for TERMOVAP TV 10+10 ml Reaction VialsReaction vials with thick walls, a cone bottom and graduation, PTFE-siliconsealing and open-hole threaded caps. They are designed for Termovaps.5 ml Reaction VialsReaction vials with thick walls, a cone bottom and graduation, PTFE-siliconsealing and open-hole threaded caps. They are designed for Termovapswhen using a reducing adapter P/N: 57050530.Reducing Adapters to TermovapsThe reducing adapters make possible to use 5 ml reaction vials or othervials or tubes with Termovaps.5 ml Reaction vials (package of 12) P/N: 09944010 ml Reaction vials (package of 12) P/N: 099451Reducing Adapter for 5 ml Vials to TV 10+ (for reaction vials P/N: 099440) P/N: 57050530Reducing Adapter for 12x32 mm Vials to TV 10+ (for standard vials 12 x 32 mm) P/N: 57050590Non-Standard Reducing Adapter to TV 10+ (please specify vial or tube external sizes) P/N: 57050990DEGASSERS on-line, four channelThe Vacuum Degasser is a high-efficiency, on-line module that removesdissolved gasses from HPLC solvents. Its unique design assures reliablecontinuous operation and the highest level of continuous performanceavailable without the need for helium degassing. Up to four solvent lines maybe degassed by one unit simultaneously. Very short startup times.We offer stand-alone unit DG 3014 and in-built type DG 4014. The typeDG 4014 is degasser built in box for mobile phase reservoirs and it makesit possible to place it on top of pump.OTHER ACCESSORIESDegasser DG 3014 on-line, four channels P/N: 49000000Box with Degasser DG 4014 four channelsP/N: ZA100001SS Pulse DamperThis pulse damper enables dramatic reduction of residual pulsationcaused by a pulse pump. Internal volume is low (max. 0.9 ml). High pressureresistance is up to 41 MPa (6 000 psi). A non-metal version is possible (PTFEand PPS).SS Pulse Damper MTG Kit 120527 P/N: 20527Bioclean Pulse Damper MTG Kit 120537 P/N: 20537KNAUER Dynamic Mixing ChamberThe Dynamic Mixing Chamber is used during gradient elutionto homogenize different solvents with the smallest possible volume. It canbe employed in micro as well as in analytical and semi-preparative HPLCranges by moving or combining the intermediate pieces. It is unimportantif this is a high or low pressure gradient.Dynamic Mixing Chamber, SSDynamic Mixing Chamber, preparative version, SSDynamic Mixing Chamber, titaniumP/N: A0285P/N: A0581P/N: A02759

DATA COLLECTIONS AND SOFTWARECLARITY CHROMATOGRAPHY STATION for WindowsTMAdvanced Chromatography Station - a universal solution forany commercially available chromatograph: multi instrumentalversion with multidetector measurement, data acquisition,evaluation and instrument control.Clarity is designed to acquire and evaluate data from anycommercially available chromatograph with standard analogoutput and from selected chromatographs with digital output.Up to four independent chromatography systems, eachof which can be equipped with up to four detectors, canbe simultaneously connected.Clarity is possible extend by Direct control of LC Pumps,Direct control of Autosamplers and Direct controlof GC chromatographs.CLARITY LITETMClarity Lite is inexpensive version of Clarity designed to be usedwith only single instrument in a non-regulated environment.Clarity Lite is easily upgradeable to full version of Clarity.A/D Converter Board INT7The INT7 is an internal 24-bit A/D converter board for use witha PCI bus and is equipped for easy Plug-and-Play installation.It contains 1 to 4 fully independent sigma delta integrating A/Dconverters for processing positive and negative voltages.TypeP/NClarity - Station for 1 instrumentC50Clarity Add-on (add 1 instrument)C55Clarity Offline - Off line Evaluation Station C59Clarity LiteC40A/D Converter Board INT7, 1 channel * I71A/D Converter Board INT7, 2 channels * I72A/D Converter Board INT7, 4 channels * I74U-PAD, external USB A/D converter, 2 channels U2SST System Suitability Test ClarityA22GC Direct Control of GC Chromatographs Clarity A23LC Direct Control of LC Pumps Clarity A24AS Direct Control of Autosamplers Clarity A26Control Board for LC Gradient CB20A27* for internal PCI slotHAMILTON SYRINGES FOR HPLC700 Series Cemented NeedleSyringes1700 Series GASTIGHT R SyringesTypeP/N701 NR 10 µl Hamilton syringe (22s/51/3) 80365702 NR 25 µl Hamilton syringe (22s/51/3) 80465705 NR 50 µl Hamilton syringe (22s/51/3) 80565710 NR 100 µl Hamilton syringe (22s/51/3) 80665725 NR 250 µl Hamilton syringe (22/51/3) 80765750 NR 500 µl Hamilton syringe (22/51/3) 80865Specification of needles:- length 2" (51 mm), point style #3, gauge 22 or 22sTypeP/N1701 RNR 10 µl Hamilton syringe (22s/51/3) 800651702 RNR 25 µl Hamilton syringe (22s/51/3) 802651705 RNR 50 µl Hamilton syringe (22s/51/3) 809651710 RNR 100 µl Hamilton syringe (22s/51/3) 810651725 NR 250 µl Hamilton syringe (22s/51/3) 811651750 NR 500 µl Hamilton syringe (22/51/3) 81265RNR Needle 2.5 µl -100 ml (22s/51/3) 6/pk 7770-01RNR Needle 250 µl-10 ml (22/51/3) 6/pk 7780-04LUER needles are designed for injectionof a sample to a sample loop by means of a syringecapable of accommodating the needle. Kel-F ® hub foruse with LT or TLL syringes or connectors.TypeP/NLuer Hub Needle KF 722 (22/51/3) 90134Note: DataApex TM , CSW TM , Clarity TM and Clarity Lite TM are Trademarks of DataApex s.r.o. company.13

FILTERSSS Mobile Phase Filters and Helium SpargersCThe mobile phase filters protect your HPLC system fromsmall particles in the mobile phase. Helium spargers offeran inexpensive way of preparing and maintaining themobile phase free of dissolved gases (10 um porosity).The filters consist of a metal porous section and an endtip with a PEEK screw. The filter can be connected to thepump inlet by a PTFE or FEP O.D. 1/8" or 1/16" tube.DBMobile Phase Filter and Helium Spargers Porosity Flow rate* Fitting ID P/NSS Mobile phase filter B 2 µm 8 mL/min 1/16" Fitting ID (1/16" tube OD) 367016-2SS Mobile phase filter/Helium sparger B 10 µm 20 mL/min 1/16" Fitting ID (1/16" tube OD) 367016-10SS Mobile phase filter B 20 µm 20 mL/min 1/16" Fitting ID (1/16" tube OD) 367016-20SS Mobile phase filter C 2 µm 8 mL/min 1/8" Fitting ID (1/8" tube OD) 367008-2SS Mobile phase filter/Helium sparger C 10 µm 20 mL/min 1/8" Fitting ID (1/8" tube OD) 367008-10SS Mobile phase filter C 20 µm 20 mL/min 1/8" Fitting ID (1/8" tube OD) 367008-20SS Mobile phase filter D 2 µm 50 mL/min 1/8" Pipe OD (1/8" tube ID) 3678-2SS Mobile phase filter D 25 µm 100 mL/min 1/8" Pipe OD (1/8" tube ID) 3678-25* Suggested max. flow rateNo-Met Bio-compatible Mobile Phase FilterThe No-Met filters are designed from inert polymeric components, whicheffectively eliminate metal contamination of the fluid path.DescriptionP/NNo-Met Mobile phase filter PTFE 5 µm, 1/8" 32171Replacement PTFE Filter Element 5 µm 32172DescriptionP/NNo-Met Mobile phase filter PE 20 µm, 1/8" 32178Replacement PE Filter Element 20 µm 32179Filter body made trom Polyethylene orPTFE. Fitting detail made of PEEK.Ferrule made of Tefzel.Inline Filters/Pre-column FiltersThe Inline Solvent Filter is placed between the pump and the sampleinjection valve and traps particles that normally pass through standard pistonseal ware. The 2 µm replaceable filter element provides effective protectionwithout increasing system back pressure. The PEEK filter has a hand-tightdesign that and requires no wrenches.The Pre-column Inlet Filter is connected between the injector and thecolumn to protect your expensive columns from particles from samples,mobile phases or instrument seals, which are factors contributing to the shortlife of your column.DescriptionP/NIn-line Filter SS with 2 µm SS Frit (1/16" threads) 624200In-line Filter PEEK with 2 µm PEEK Frit (1/16" threads) 624201Pre-column Filter SS with 0.5 µm SS Frit (1/16" threads) 624210DescriptionP/NReplacement Inline Frit, 2 µm, SS (1/16" threads) 624230Replacement Inline Frit, 2 µm, PEEK (1/16" threads) 624231Replacement Pre-column Frit, 0.5 µm SS (1/16" threads) 62425014

FITTINGSNUTSFittings Description P/NSS Nut 1/16", 10-32 threads High pressure, for 1/16" tubing, 5 mm head 00000120SS Nut 1/16", long head, 10-32 threads High pressure, for 1/16" tubing, 5 mm head 00000122PEEK One-Piece Hand-tight Nut 1/16", 10-32 High pressure, for 1/16" tubing 00000121Flangeless Nut 1/16", 1/4"-28, PPS Low pressure, for 1/16" tubing JR-55070-10PEEK Nut 1/8", 1/4"-28 threads Low pressaure, for 1/8" tubing 00000450PLUGSFittings Description P/NPEEK One-Piece Handtight Nut 1/16", 10-32 with plug High pressure, for 1/16" tubing 00000123Column End Plug (Black), Nylon, 10-32 Low pressure, for 1/16" tubing JR-4072White nylon Plug 1/4" - 28 UNF Low pressure, for 1/8" tubing 00WTR001FERRULESFittings Description P/NSS Ferrule 1/16" High pressure, for 1/16" tubing 00000080PEEK Ferrule 1/16" High pressure, for 1/16" tubing 00000086PTFE Ferrule 1/16" High pressure, for 1/16" tubing 00000084Tefzel Ferrule 1/16" big High pressure, for 1/16" tubing JR-041-10KEL-F Ferrule 1/8" Low pressure, for 1/8" tubing 00000470OTHERSFittings Description P/NSS Union 1/16" (10-32) 0.5mm bore* High pressure, for 1/16" tubing 00000201PEEK Union 1/16" (10-32), 0.3mm bore * High pressure, for 1/16" tubing JR-061PEEK Union 1/8" (1/4"-28), 1.3mm bore * Low pressure, for 1/8" tubing JR-065SS Tee 1/16" (120°), 10-32 threads * High pressure, for 1/16" tubing 00000400* without fittingsTUBINGSFittings Description P/NSS Tubing OD 1/16" mm x ID 0.25 mm 990215SS Tubing OD 1/16" x ID 0.5 mm 990217SS Tubing OD 1/16" x ID 1 mm 990218PEEK Tubing OD 1/16" x ID 0.13 mm Red Striped Color Coded JR-T-5999PEEK Tubing OD 1/16" x ID 0.18 mm Yellow Striped Color Coded JR-T-6000PEEK Tubing OD 1/16" x ID 0.25 mm Blue Striped Color Coded JR-T-6001PEEK Tubing OD 1/16" x ID 0.50 mm Orange Striped Color Coded JR-T-6002PEEK Tubing OD 1/16" x ID 0.75 mm Green Striped Color Coded JR-T-6003PEEK Tubing OD 1/16" x ID 1 mm Grey Striped Color Coded JR-T-60031PTFE Tubing OD 1/16" x ID 0.50 mmJR-T-4183PTFE Tubing OD 1/16" x ID 0.75 mmJR-T-4036PTFE Tubing OD 2.1mm x ID 1.5 mm S1810-20FEP Tubing OD 1/8" x ID 1/16" S1815-08TOOLSTerry Tool Tubing Cutter 1/16"This cutter is designed for easy cutting of 1.5 mm and 1/16" capillaries and the cut depth can be adjustedby a screw depending on capillary wall thickness. The capillary is cut along its perimeter and subsequently easilybroken off. The break formed in this manner is even and the 0.2 mm I.D. capillaries do not get clogged.Ferrule remover 1/16", 10-32This tool is designed for the simple removal of a ferrule (not heavily deformed) from 1.5 mm and 1/16" O.D.capillaries with a 10-32 threads nut.FittingsP/NTerry Tool Tubing Cutter 1/16" 460008Spare cutting wheel 460009Ferrule Remover 1/16", 10-32 60000000Open End Wrench 5.5 - 7 mm 990403Open End Wrench 8 - 10 mm 990383Open End Wrench 11 - 12 mm 990389Open End Wrench 13 - 15 mm 99039015

ECOM spol. s r.o.Americka 3CZ 120 35 Praha 2Czech RepublicPhone: +420 221 511 310Fax: +420 242 498 212E-mail: info@ecomsro.czwww.chromatography-hplc.com