Wood Oak Tech Data Sheet - Iris US

MANUFACTURERIris U.S.1360 S Vernon Street,Anaheim, CA 92805Telephone: 800.323.9906Fax: 866.398.4747Web: www.irisus.com1. PRODUCT NAME2. PRODUCT DESCRIPTIONWood Oak CollectionWashed OakSize/thickness:6” x 24” x 3/8” nominalWengeNote to Specifier: Click on color with Internet Connection tohyperlink directly to product color data at the Iris US website.Recommended Grout Joint: 3/32″ or greaterGrout joints of 1/8″ inch or less, especially withlarger format tiles or running bond patterns, mayrequire floor flatness values in excess of the 1/4″in 10’ (or 1/16” in 1.0’) standard required byANSI.See ANSI A108.01 2.6.2.2For patterns with running bond/brick jointspatterns Iris US recommends a maximum of 33%offset.See ANSI A108.02 section 4.3.8

3. TECHNICAL DATA4. INSTALLATIONPhysicalPropertiesASTMTestIndustry Standards Iris US ResultsWater Absorption C373 0.5% Maximum ≤ 0.1%Thickness Dimension C499 Range 0.04 Maximum ≤ 0.04Facial Dimension C499 ±0.25% ≤ 0.25%Warpage Average C485 ± 0.40% on any edge ≤ ± 0.40%Warpage Average C485 ± 0.40% on diagonal ≤ ± 0.40%Wedging Average C502 ± 0.25% ≤ ± 0.25%Bond Strength C482 50 psi or greater > 200 psiHardness (Mohs) No Requirement ≥ 7Frost ResistanceNo sample must show No cracking or(Freeze/Thaw)C1026 alterations to surface spalling occurredChemical Resistance C650 No Requirement Class ABreaking Strength C648 250 lbf or greater ≥ 400 lbfCoefficient of≥ 0.80 DryFriction (Static) C1028 No requirement ≥ 0.60 WetCoefficient ofFriction (Dynamic)DCOF Acutest sm(wet) ≥ 0.42* ≥ 0.50Data taken from representative glazed collection. Individualproduct testing can be conducted by request.Coefficient of Friction: All values given are for matte or honedmaterial. No values are given for polished material. Iris U.S.does not recommend polished surfaces in area subject toexposure from grease, oil or water.* For level interior spaces to be walked upon when wet (seeANSI A137.1 section 6.2.2.1.10 – Section 9.6 for testprocedure)All installation work using Iris US tiles will conformto the standards set forth in the latest version ofANSI A108/118 and/or the TCNA Handbookfor Ceramic Tile installations.Installation or setting materials:Movement joints shall be provided throughout thetile and work will conform to ANSI SpecificationA108.01-3.7; A108.02 – 4.4. and TCNA DetailsEJ171.Setting materials used will conform to the ANSI118.4 standard or greater and berecommended by the selected manufacturer forthe installation & setting materials for ceramic orporcelain tile based on the applicationrequirements.5. WARRANTYIris US guarantees that its products will be freeof manufacturing defects and they will meet orexceed the performance specifications set forthin ANSI 137.1.6. MAINTENANCECare and Maintenance RecommendationsGuidePlease refer to Iris US Care and MaintenanceRecommendations Guide for all technicalinformation as to the care of this collection.7. TECHNICAL SERVICESTechnical AssistanceGuide Specifications, literature, MSDS, tilesamples, details and installation procedures areall available for your use or libraries.Please contact your nearest Iris USrepresentative for catalogues, physical samples,or architectural binders.