Firmware Update Instructions For [Model: D2-751G] - D2 PAD

1.4 Click [Make]. When the process finishes, the Success window will pop up.1.5 Now drag [aml_autoscript] file from aml_autoscript folder to your micro SD card.Open the [D2-751G_FirmwareUpdateTool] folder and copy [recovery.img], [update.zip] and[factory_update_param.aml] onto your micro SD card as well.1.6 You may now disconnect/eject your micro SD card from the computer/card reader.2. To update the firmware on your D2-751G Platinum Tablet2.1 Turn off the tablet.2.2 Insert the micro SD card containing the required files as illustrated in 1.5.2.3 Plug in the power adapter.2.4 Wait until a “battery charging” icon displays on the screen.2.5 Click the Power button 6 to 8 times.2.6 The battery charging icon will freeze on display for up to 3 minutes, then an Androidrobot logo (see figure A), with a loading bar on the bottom, will appear.2.7 Once the firmware installation is complete (approximately 2 to 3 minute) the Digital2Logo will appear automatically.2.8 The Android setup screen will appear after the Digital2 logo disappears. Pleasecomplete the setup with your desired settings. Once finished, the firmware update iscomplete and you can remove the micro SD card.2Password Unlock Instruction for [Model No. : D2-751G]Figure A