Data Sheet - SPINDLE COOLANT SF

www.Oil18.ru, t/faks(3412)902-313, 902313@inbox.ruSPINDLE COOLANT SFIssue Number 202/06/2008Machine Tool CoolantDESCRIPTIONCastrol Spindle Coolant SF is a water based spindle coolant formulated to provideexcellent corrosion protection, for extended service intervals.APPLICATIONCastrol Spindle Coolant SF is a pre-mixed long life coolant providing low temperatureprotection, ensuring free circulation if the equipment is subjected to temperatureextremes.Castrol Spindle Coolant SF is a combination of carefully balanced corrosion inhibitors,that ensure optimum cooling and corrosion protection.Mixing Spindle Coolant SF with different products may lead to loss of protection.FEATURESBENEFITSMulti - Metal compatibilitySuitable for use in cast ironand aluminium machinesHigh performance corrosioninhibitorsExcellent corrosion protectioneven in sensitive systemsHigh thermal capacityEnsures machines operatewithin temperature limitsPre-Mixed, ready for useDilution and mixing not required,ensuring optimum performanceBoron and Silicate freePrevents formation of depositsduring serviceAll reasonable care has been taken to ensure that the information contained in this publication is accurate as at the date of printing . It should benoted however that the information above may be affected by changes occurring subsequent to the date of printing in the blend formulation ormethods of application of any of the products referred to or in the requirements of any specification approval relating to any such products . 1 of 2

SPINDLE COOLANT SFTYPICAL PHYSICAL CHARACTERISTICSAppearanceColourless mobile liquidRelative Density @ 20ºC 1.040Refractive Index 18 - 20pH 7.0Pour point, ºC -15Health and Safety information sheets are available for all Castrol products from the address below:Castrol (U.K.) Limited, Pipers Way, Swindon, Wiltshire SN3 1RE, England, Telephone:Orders/Enquiries (08459)645111, Technical Enquiries (01793)452111, Fax (01793)486083All reasonable care has been taken to ensure that the information contained in this publication is accurate as at the date of printing . It should benoted however that the information above may be affected by changes occurring subsequent to the date of printing in the blend formulation ormethods of application of any of the products referred to or in the requirements of any specification approval relating to any such products . 2 of 2