Road Tar Layer Thickness Tester - Test and Measurement ...

StratoTest 4100http://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zahttp://www.instrumentsgroup.co.zaTechnical dataMeasuring principle:Measurable layers:Reflectors:Measuring ranges:Resolutionof standard probe:Display:eddy current testingall non-metallic road layer materialsaluminium foils or sheets of different sizes0…40 cm (N400ST standard probe);0…10 cm (N100ST optional probe); 0…80 cm (N800ST optional probe)0.01 cm from 0…5 cm, 0.02 cm from 5…10 cm, 0.1 cm from 10…30 cm0.2 cm from 30…35 cm, 0.4 cm from 35…40 cmTolerance Reflector Measuring range/(cm) Toleranceof standard probe:0.7 m x 0.3 m0…30 ± (0.1 cm +2 % of reading)1.0 m x 0.3 mdigital on LCD30…35 ± 2 % of reading35…40 ± 3 % of reading0…30 ± (0.1 cm +2 % of reading)30…35 ± 2 % of reading35…40 ± 2 % of readingData storage: DIRECT mode: approx. 500 single readings and statistical valuesSITE mode: approx. 6,000 single readings incl. statistics;5 site memories available with 300 stations each; 4 measuring spots per station;5 layer material types per measuring spotPower supply:Battery life:Ambient temperature:Delivery scheduleElektroPhysikPasteurstr. 15D-50735 KölnTel.: (0221)75204-0Fax: (0221)75204-67www.elektrophysik.cominfo@elektrophysik.com1x 9 V alkaline batteryapprox. 20 hoursGauge: 0°C…50°C, probe: 0°C…70°CDolly with weather protection boxand carrying case including■❙ StratoTest 4100 gaugeincl. alkaline battery■❙ N400ST probe■❙ Connecting cablefor probe and gauge■❙ Calibration plate■❙ Headphones■❙ Instruction manualOptional probes0.6 m x 0.6 m1.0 m x 1.0 m steel■❙ N100ST probe, up to 10 cm■❙ N800ST probe, up to 80 cmRecommended accessories■❙ Portable data printer MiniPrintwith built-in storage battery,connecting cable and batterycharger■❙ Foil dispenser for easy andaccurate cutting of self-adhesivealuminium reflector foils■❙ Thickness standards accordingto TPD StB 89 incl. 6 distancepieces from 10 mm to 220 mmthickness and soft bag fortransportation and storage■❙ 9 Volt storage batteryincl. chargerOther gauges from our rangeof products■❙ Coating thickness &Wall thickness gauges■❙ Porosity detectors■❙ Gloss measuring gauges■❙ Hardness & Roughness testers■❙ On-line systems for continuousthickness measurement of filmsand sheets■❙ Continuous pinhole detectorsSupplied by :ElektroPhysik USA770 West Algonquin Rd.Arlington Heights IL 60005Phone: www.instrumentsgroup.co.za(847)437-6616Fax: (847)437-0053www.elektrophysik.comt.m.i@iafrica.com Tel: 0027 (011) 683 4365epusa@aol.comThe following example showsthe print-out with MiniPrintin SITE mode:ElektroPhysikStratoTest16-Jan-01 15:30Probe N400STSITE 1234Coating 2No. of pos. 3OFFSET 0.0 cmSTAT POS COAT0.000 1 8.1 cm0.000 2 8.0 cm0.000 3 8.2 cm0.050 1 8.1 cm0.050 2 7.9 cm0.050 3 7.9 cm0.100 1 8.0 cm0.100 2 8.1 cm0.100 3 7.9 cm8.300 1 8.2 cm8.300 2 8.1 cm8.300 3 8.2 cmSTATISTICNumber 498Mean 8.1 cmSt. dev. 0.3 cmKvar 3.7%Max. 8.6 cmMin. 7.6 cmTest and Measurement Instruments C.C.____ date and time of print-out____ type of probe in use____ no. of site____ kind of layer 2 = binder____ 3 measuring positions:left, middle, right____ constant value (here 0.0 cm)add or substractstation 1 measuring position 2coating thickness 31max. 300 stations/site2max. 4 positions/station3relative readings(max. 500 readings/site)(max. 6,000 readings in total)statistics from all readingsof one siteEPK 11/01 937-N Specifications subject to change without notice