09.07.2015 Views

Title Reference Design Report for a 12.6 W, TRIAC ... - ThomasNet

Title Reference Design Report for a 12.6 W, TRIAC ... - ThomasNet

Title Reference Design Report for a 12.6 W, TRIAC ... - ThomasNet

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RDR-347 <strong>12.6</strong> W Dimmable LED Driver Using LYT4313E11-Feb-1317 Alternate EMI Configuration <strong>for</strong> Leading Edge <strong>TRIAC</strong> Dimming withReduced Audible NoiseAudible Noise with Leading Edge <strong>TRIAC</strong> Dimmer operation can be reduced by replacingthe differential chokes L2 and L3 with a high saturation type inductor. On the schematicbelow, L2 and L3 were replaced with a single differential choke L3. Common mode chokeL1 was also replace to compensate <strong>for</strong> the reduced filtering caused by removing L2.The active pre-load were also adjusted to give 1% dimming at 30 V RMS input voltage.17.1 SchematicFigure 84 – Schematic with Reduced Audible Noise and 1% Dimming at 30 V RMS Input.Power Integrations, Inc.Tel: +1 408 414 9200 Fax: +1 408 414 9201www.powerint.comPage 70 of 78

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!