Price Book 72 - LV Sales Inc

Price Book 72AEffective July 18, 2011EffectiveJuly 18, 2011

Schlage Price Book 72AEffective July 18, 2011This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.Administrative Offices11819 North Pennsylvania StreetCarmel, IN 46032(800) 847-1864FAX (800) 452-0663Customer CareCommercial3899 Hancock ExpresswayColorado Springs, CO 80911Residential2119 E. Kansas City RoadOlathe, KS 66061CanadaIR Security & Safety1076 Lakeshore Road EastMississauga, Ontario L5E 1E4Canada(905) 403-1800FAX (905) 278-1413Internethttp://www.schlage.com(877) 671-7011FAX (800) 452-0663FAX (650) 616-6086Order EntryFAX (800) 452-0665Certifications:Schlage products, as noted in our catalog, are tested by independent laboratories for compliance with UL andANSI standards. Any field modification or alteration of product will void certification.For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see theIngersoll Rand Security Technologies BAA/ARRA catalog.Disclaimer:The Schlage Lock Company reserves the right to make changes in designs and specifications, to make addition or improvementson its products or to discontinue products without incurring any obligation. The Schlage Lock Company is not responsiblefor any modification, addition or alteration to our products by others.Copyright 2010, Ingersoll RandAll rights reserved, printed in USAUnited States CommercialSSC CarolinaDavidson, NC 28036ssccarolina@irco.com704-549-1999SSC CentralOlathe, KS 66061ssccentral@irco.com913-393-8700SSC ChicagoAddison, IL 60101sscchicago@irco.com877-282-1721SSC FloridaOrlando, FL 32750sscflorida@irco.com407-571-2000SSC Great LakesPittsford, NY 14534sscupstatenewyork@irco.com585-248-1520SSC Metro New YorkHawthorne, NY 10532sscmetronewyork@irco.com914-742-2760SSC MichiganLivonia, MI 48150sscmichigan@irco.com734-655-8181SSC Mid-AtlanticWilmington, DE 19809sscmidatlantic@irco.com800-996-2961SSC MidwestIndianapolis, IN 46250sscindiana@irco.com317-715-4500SSC Mountain StatesCentennial, CO 80111ssccolorado@irco.com720-279-5600Salt Lake City, UT 84115801-401-5400SSC New EnglandNeedham Heights, MA 02494sscnewengland@irco.com781-453-5300SSC North CentralEden Prairie, MN 55346sscnorthcentral@irco.com952-674-4940SSC Northern CaliforniaPleasanton, CA 94588sscnortherncalifornia@irco.com925-462-4777SSC NorthwestBothell, WA 98011sscnorthwest@irco.com425-686-3615Vancouver, WA 98661306-356-3035SSC SouthNorcross, GA 30071sscsouth@irco.com678-906-2103SSC Southern CaliforniaArcadia, CA 91006sscsoutherncalifornia@irco.com626-359-5555SSC SouthwestTempe, AZ 85281sscarizona@irco.com480-377-6700SSC TexasPlano, TX 75024ssctexas@irco.com972-378-1191Houston, TX 77086713-683-6400CanadaSSC Western CanadaBritish ColumbiaRichmond, BC V7A 4V4sscbritishcolumbia@irco.com604-272-5222AlbertaCalgary, AB T2E 7T1ssccalgary@irco.com403-287-1190Edmonton, AB T5V 1J7sscedmonton@irco.com780-451-1641Saskatchewan/ManitobaWinnipeg, MB R3E 2V2sscwinnipeg@irco.com204-786-6355OntarioMississauga, ON L5E 1E4sscontario@irco.com905-403-1800877-590-4734SSC Western CanadaQuebecMontreal, PQ H2B 1Z5sscquebec@irco.com514-385-0005Price Book 72AEffective July 18, 2011 • Rev. 7/11

Table of ContentsTerms & ConditionsTerms-1Standard Terms . . . . . . . . . . . . . . . . . . . Terms-2Freight Weight Chart . . . . . . . . . . . . . . Terms-4Schlage . . . . . . . . . . . . . . . . . . . . . . . Terms-4Portable Security . . . . . . . . . . . . . . . . Terms-5General Terms and Conditionsfor Sales and Service . . . . . . . . . . . . . . Terms-6Product Warranties . . . . . . . . . . . . . . . . Terms-8Commercial Applications . . . . . . . . . . . . Terms-8Residential Applications . . . . . . . . . . . . . Terms-8Distributor Function and Location Policy . . Terms-9Cylinder Policies . . . . . . . . . . . . . . . . . . Terms-10Primus ® Sales Policy . . . . . . . . . . . . . . . Terms-10Everest ® Sales Policy . . . . . . . . . . . . . . Terms-11Everest Small Format InterchangeableCore Key Control Policies . . . . . . . . . . . Terms-12Restricted Keyway Policy . . . . . . . . . . . Terms-12Construction Core Program Policy . . . . Terms-12Door Labeling Policy . . . . . . . . . . . . . . . Terms-13Master Key Shipment Policy . . . . . . . . . Terms-13Hardware Finishes . . . . . . . . . . . . . . . . . Terms-14Parts IndexIndex-1Forms & ExamplesForms-1Where to Send Orders . . . . . . . . . . . . . Forms-1How to Determine Hand of Door . . . . . . Forms-1How to Determine Hand of Parts(Handed Levers) . . . . . . . . . . . . . . . . . . Forms-1How To Order . . . . . . . . . . . . . . . . . . . . Forms-2Ordering Examples . . . . . . . . . . . . . . . . Forms-3Order Forms . . . . . . . . . . . . . . . . . . . . . Forms-4Using Order Forms . . . . . . . . . . . . . . . . Forms-4Sequential List of Order Forms . . . . . . . Forms-4COMMERCIALA-Series . . . . . . . . . . . . . . . . . . . . . . . . . A-1Functions . . . . . . . . . . . . . . . . . . . . . . A-2Complete Locks . . . . . . . . . . . . . . . . . . A-3Options . . . . . . . . . . . . . . . . . . . . . . . . A-4Parts . . . . . . . . . . . . . . . . . . . . . . . . . . A-7AL-Series . . . . . . . . . . . . . . . . . . . . . . . . AL-1Functions . . . . . . . . . . . . . . . . . . . . . . AL-2Complete Locks . . . . . . . . . . . . . . . . . AL-3Options . . . . . . . . . . . . . . . . . . . . . . . . AL-4Parts . . . . . . . . . . . . . . . . . . . . . . . . . . AL-8B250-Series . . . . . . . . . . . . . . . . . . . . . . B250-1Functions . . . . . . . . . . . . . . . . . . . . . B250-2Complete Locks . . . . . . . . . . . . . . . B250-3Options . . . . . . . . . . . . . . . . . . . . . . . B250-4Parts . . . . . . . . . . . . . . . . . . . . . . . . B250-8B500-Series . . . . . . . . . . . . . . . . . . . . . . B250-1Functions . . . . . . . . . . . . . . . . . . . . . B250-2Complete Locks . . . . . . . . . . . . . . . B250-3Options . . . . . . . . . . . . . . . . . . . . . . . B250-4Parts . . . . . . . . . . . . . . . . . . . . . . . . B250-8B600/700/800-Series . . . . . . . . . . . . . . . B600-1Functions . . . . . . . . . . . . . . . . . . . . . . B600-2Complete Locks . . . . . . . . . . . . . . . . . B600-3Options . . . . . . . . . . . . . . . . . . . . . . . . B600-5Parts . . . . . . . . . . . . . . . . . . . . . . . . . . B600-8D-Series Knobs . . . . . . . . . . . . . . . . . . . DK-1Functions . . . . . . . . . . . . . . . . . . . . . . DK-2Complete Locks . . . . . . . . . . . . . . . . . DK-4Options . . . . . . . . . . . . . . . . . . . . . . . . DK-5Parts . . . . . . . . . . . . . . . . . . . . . . . . . . DK-8ND-Series Levers . . . . . . . . . . . . . . . . . ND-1Functions . . . . . . . . . . . . . . . . . . . . . . ND-2Complete Locks . . . . . . . . . . . . . . . . . ND-5Options . . . . . . . . . . . . . . . . . . . . . . . . ND-6Parts . . . . . . . . . . . . . . . . . . . . . . . . . . ND-12H-Series . . . . . . . . . . . . . . . . . . . . . . . . . H-1Functions . . . . . . . . . . . . . . . . . . . . . . . H-2Complete Locks . . . . . . . . . . . . . . . . . H-3Options . . . . . . . . . . . . . . . . . . . . . . . . H-4Parts . . . . . . . . . . . . . . . . . . . . . . . . . . H-9L-Series . . . . . . . . . . . . . . . . . . . . . . . . . L-1Functions . . . . . . . . . . . . . . . . . . . . . . L-2Complete Locks . . . . . . . . . . . . . . . . . L-8Options . . . . . . . . . . . . . . . . . . . . . . . . L-20Distributor Pack Program . . . . . . . . . . L-27Parts . . . . . . . . . . . . . . . . . . . . . . . . . . L-32S-Series . . . . . . . . . . . . . . . . . . . . . . . . . S-1Functions . . . . . . . . . . . . . . . . . . . . . . . S-2Complete Locks . . . . . . . . . . . . . . . . . S-3Options . . . . . . . . . . . . . . . . . . . . . . . . S-4Parts . . . . . . . . . . . . . . . . . . . . . . . . . . S-7CS210-Series . . . . . . . . . . . . . . . . . . . . . CS210-1Functions . . . . . . . . . . . . . . . . . . . . . . CS210-2Complete Locks . . . . . . . . . . . . . . . . . CS210-3Options . . . . . . . . . . . . . . . . . . . . . . . . CS210-5Parts . . . . . . . . . . . . . . . . . . . . . . . . . . CS210-7S200-Series . . . . . . . . . . . . . . . . . . . . . . S200-1Functions . . . . . . . . . . . . . . . . . . . . . . S200-2Complete Locks . . . . . . . . . . . . . . . . . S200-3Options . . . . . . . . . . . . . . . . . . . . . . . . S200-5Parts . . . . . . . . . . . . . . . . . . . . . . . . . . S200-8ElectronicsSchlage Electronic Security Price Book 23Price Book 72AEffective July 18, 2011 • Rev. 7/11i

Table of ContentsCYLINDER/KEYS/PORTABLE SECURITY/CABINET LOCKSCylindersCYL-1Schlage Cylinder & Keyway Terminology CYL-2Multiple Tailpiece Cylinders . . . . . . . . . . CYL-3Bulk Pack Cylinders . . . . . . . . . . . . . . . CYL-4Primus Cylinders-Sub-Assembled . . . . CYL-5A & H, AL, CL, D, ND, F, FA, PL,S & S200 . . . . . . . . . . . . . . . . . . . . . . . . CYL-6B500 . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-14B100, B250, B400, E/B, F100, H,MD, S200 . . . . . . . . . . . . . . . . . . . . . . . . . CYL-16B300, BA300, F300, FA300 . . . . . . . . . CYL-20B600/700/800 . . . . . . . . . . . . . . . . . . . . CYL-22BC100 . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-26Mortise . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-28Schlage cylinders for Falcon &Von Duprin . . . . . . . . . . . . . . . . . . . . . . . CYL-38Rim Cylinders . . . . . . . . . . . . . . . . . . . . CYL-39Interchangeable Cores . . . . . . . . . . . . . CYL-41Competitor Retrofit Cylinders . . . . . . . . CYL-43Letter/Mail Box . . . . . . . . . . . . . . . . . . . . CYL-47Special Cylinders . . . . . . . . . . . . . . . . . . CYL-48Pins, Springs & Pinning Components . . CYL-49Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-51Shells . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-52Competitive Keying Kit Refills . . . . . . . . CYL-53Keys & KeyingKeys-1Keys Ordered Separately . . . . . . . . . . . Keys-2Key Stamping . . . . . . . . . . . . . . . . . . . . Keys-12Cylinder Stamping . . . . . . . . . . . . . . . . . Keys-13Construction Core Program . . . . . . . . . . Keys-14Keying Charges . . . . . . . . . . . . . . . . . . . Keys-16QuicKey Program . . . . . . . . . . . . . . . . . Keys-21SITEMASTER 200 ® . . . . . . . . . . . . . . . Keys-23Portable SecurityPS-1PL Series Cross Reference . . . . . . . . . . PS-3Key-In-Knob with Cylinder . . . . . . . . . PS-4Key-In-Knob Less Cylinder . . . . . . . . PS-5SFIC Less Cylinder . . . . . . . . . . . . . . . . PS-6Full Size IC Core . . . . . . . . . . . . . . . . . PS-7Custom Engraving Brass Padlocksand Chrome Plated Brass Padlocks . . PS-8Parts and Accessories . . . . . . . . . . . . . . PS-9Flex Security . . . . . . . . . . . . . . . . . . . . . PS-12CL-SeriesCL-1Complete Locks . . . . . . . . . . . . . . . . . . CL-2Options . . . . . . . . . . . . . . . . . . . . . . . . . CL-3Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-4MISCELLANEOUSTools & KitsTool-1Keying Tools & Kits . . . . . . . . . . . . . . . Tool-2Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-6Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-8Merchandising AidsMerch-1Display Mounts . . . . . . . . . . . . . . . . . . . Merch-3Miscellaneous . . . . . . . . . . . . . . . . . . . . Merch-4GlossaryiiPrice Book 72AEffective July 18, 2011 • Rev. 7/11

How to Use the Price BookOrdering Options Form Name and Number NotesCommercial Products *Keys *1. Express Stock OrdersThese orders are for products shown under the StockProducts tab and qualify for 10-day order processing. Thisprogram is only for Schlage branded commercial products.2. Non-Stock OrdersThese orders are for the comprehensive listing of thecurrent product offering shown in this price book.3. Custom Orders (RFQ)These orders are for Request For Quote (RFQ) orderswhich are not covered in the price book and are subject tolonger lead times. These orders may not be combined withany Master Keyed or Non-Master Keyed products.4. Fast Track OrdersThese orders are for products in the Fast Track price bookand qualify for expedited order processing. This programincludes Schlage and Ingersoll Rand Security Technologiesbrand products. Please consult your sales representative forFast Track program availability in your area.1. Master Keyed OrdersThese orders are subject to standard lead time and process.Please attach the necessary forms if a restricted key systemor Primus order.2. Non-Master Keyed OrdersThese orders are subject to standard lead time and process.If you are ordering a restricted key system or Primus order,please attach the necessary forms.3. Primus Face SheetOriginal signed form must accompany any Primus orPrimus XP level 3, 4, or 9 order.4. Primus Signature CardOriginal signed form must accompany any NEW Primus orPrimus XP level 3, 4, or 9 order.5. Key System SummaryPlease fill in all appropriate fields. Contact your localIngersoll Rand Security Technologies sales office for help.Stock Productsms-i500.1 Rev. 05/03ms-i500.2 Rev. 05/03Your Purchase Ordersee information requiredon your order in "Forms &Examples" price book tab.Schlage Custom ProductRequest Formms-s100 5/03Refer to Fast TrackPrice BookMaster Keyed Order Formms-i100.01 Rev. 3/01ms-i100.02 Rev. 3/01ms-i150 Rev. 2/01Non-Master KeyedOrder Formms-i250 Rev. 2/01ms-i300 Rev. 2/01Primus Face Sheetms-e120 7/02Primus Signature Formms-e130 Rev 09/07Key System Summaryms-i200 Rev 5/03All 4 Pages10-day order processing is measured in businessdays from complete order entry throughfactory production and shipment. In some casesorder entry time may be affected by seasonalvolume and order complexity. Your shippingchoice adds to total delivery time.All orders will be processed based on normalfactory lead times. An anticipated ship date willbe included with each orderacknowledgement.These products are not in the price book andmust be requested for consideration.Instructions are included in the Custom ProductRequest Process section of this book.See current Fast Track price book.Phone number 1-866-I Call IR (422-5547) orfax number 1-800-288-4242Use of order forms other than Schlage orderforms can result in an increased lead time. Ananticipated ship date will be included with eachorder acknowledgement.Use of order forms other than Schlage orderforms can result in an increased lead time.Must submit original forms, copies are notaccepted.Must submit original forms, copies are notaccepted.Please make sure the form identifies the key systemas NEW or EXISTING If removeable cores,make sure control keys are ordered. Do not forgetto mark the type of keys, stamping information,etc.Residential1. Standard Order PlanAll residential Schlage, and Dexter by Schlage productscurrently listed in this price book.Your Purchase Ordersee information required onyour order in "Forms &Examples" price book tab.All orders will be processed based onnormal factory lead times. An anticipatedship date will be included with each orderacknowledgement.Portable1. Custom Logo Request (CLR)This request is for the inclusion of a Customer's specificlogo onto the Portable Security Padlocks through the use oflaser engraving.Custom Logo Request(CLR) FormRev. 8/30/05Please submit the custom product requestform available in the "Forms & Examples"section. There is a one-time coining dieset-up charge. The charge varies dependingon the art work requested.* Please note that commercial order processing dates reflect manufacturing time only and do not include order processing or shipment times,which are variable.Price Book 72AEffective July 18, 2011 • Rev. 7/11iii

How to Use the Price BookNon-Stock ProductsIn each tabbed section of Price Book 72 you will find a comprehensive listing of our current offering per product series.Products should be ordered via the traditional method by designating the product, design, finish, handing, and options for eachline item (refer to "How to Order" in the Forms & Examples section of the price book). All orders will be processed based onnormal factory lead times. These lead times vary throughout the year and are affected by production volumes, supplier schedulesand quantity demands. An anticipated ship date will be included with each order acknowledgement.Some of the products listed in these sections require extended lead times. You will find the hourglass symbol (⧖) associated withproducts that require extended lead times so that you are aware of this condition prior to placing your order. Products includedin this classification are those items that represent a unique combination of product attributes (i.e. finish, trim, function, etc.) thattypically require additional manufacturing care and attention. Products marked “⧖” will routinely exceed normal factory leadtimes and anticipated ship dates will be indicated with each order acknowledgement.Commercial Custom Product Request ProcessWhat are Custom Products?Custom Products are products that are not in the price book and are formally requested through the Custom Product RequestProcess. Examples of these products include:• Products which at one time were offered for sale by Schlage but are no longer available in the current price book.• Custom finishes, as distinct from non-standard finishes which are clearly marked in the Price Book.• “True” Custom products, which are new variations on current or past products.How does the Custom Product Request Process work?• Complete and fax the Schlage Custom Product Request Form located in Forms & Examples to your Ingersoll Rand Security &Safety Consultant. Fax numbers are on the reverse side of the form.• Upon receipt, your Ingersoll Rand Security & Safety Consultant will determine if current Price Book items will satisfy yourneed instead of Custom Products.• If Custom Products are necessary, your Ingersoll Rand Security & Safety Consultant will forward the form to the factory forconsideration as a formal Request for Quotation (RFQ).• Upon receipt, the RFQ Coordinator at the factory will clarify the requests. Once clarified, your request is assigned an RFQnumber and forwarded to Product Management for consideration.• Within 5-working days, your request is either denied or acknowledged through your Ingersoll Rand Security & SafetyConsultant. If acknowledged, Schlage agrees to pursue the request and will advise a time to expect a firm quotation of pricingand lead-time. Acknowledgment of the request does not guarantee that Schlage will bid or fulfill this RFQ. It simply meansSchlage will give your request further evaluation.• Upon further evaluation of acknowledged requests by a cross-functional team dedicated to this process, a decision is made toeither approve and bid on your request or to decline to bid. You will be advised by your Ingersoll Rand Security & SafetyConsultant at that time if it is not approved and the reason for declining to bid.• If the request is approved, you will be advised of the non-negotiable net price, lead time and RFQ number, which must beprominently marked on your purchase order for the Custom Product. Custom Product orders may not be mixed with currentPrice Book items.• Orders submitted for Custom Products without a valid RFQ number will be rejected by Order Entry, and you will be referred toyour IR Security & Safety Consultant to start this process.ivPrice Book 72AEffective July 18, 2011 • Rev. 7/11

How to Use the Price BookCommercial Master Keyed OrdersMASTER KEYED ORDERSLEAD TIMESSchlage Forms (MS-I200, MS-I100, MS-I150)Non-Schlage FormsFactory Lead TimeExtended Lead TimeAdditional 5 WorkingDays MinimumIn an effort to expedite the process of managing our growing volume of Master Keyed order requests, Master Keyed orders submittedin the following choice of formats will receive factory lead times based on the following criteria:• Orders submitted on the Key System Summary form (MS-I200) and the Master Keyed Order forms (MS-I100 and MS-I150)OR• Orders submitted on the Key System Summary form (MS-I200) and your purchase order with information specified in thefollowing sequence:Qty Product Design Finish Hand Latch Strike Addʼl DetailsDoor Detail InformationDHI Key SymbolLead times for Master Keyed orders in any other format will be extended at least 5 additional working days. In all cases, allowadditional lead time for clarifications and complex keying requirements. The Master Keyed order forms are located in theForms & Examples/Keys and Keying sections of the price book. For your convenience you can download the Master Keyedorder forms from our web site at http://professional.schlage.com/sales_service/sss_forms.aspCommercial QuicKey ProgramOur QuicKey Program is designed to help you get the key blanks and Everest ® small format interchangeable cores you needwith the shortest possible lead time. All standard bow and embossed key blanks, including restricted and Primus ® blanks areincluded in this program with the exception of those key blanks that already appear in our Stock Products listing. The followingguidelines must be adhered to in order to take advantage of this program:• All orders must be prominently marked "QuicKey" on the top of your order and/or use our QuicKey Order Form found in theForms & Examples section.• QuicKey orders must be comprised of 100% qualifying key blanks and/or cores (i.e. not combined with orders for anyother products).• When ordering Primus or other restricted key blanks, the appropriate face sheets and letters of authorization must accompanyyour order.QuicKey key blanks are available only in boxes of 50 with exception of control keys. Primus and Everest key blanks ordered viathis program will ship in 5-days and Classic and competitive replacement key blanks will ship in 10-days. Mixed QuicKeyorders will revert to the longer lead time. For complete program details and product availability refer to the QuicKey listing inthe Keys & Keying section of the price book.Residential KeyingResidential Master Key (RMK): RMK is a single key that will grant access to all opening with in the facility (i.e. master key).Additionally, each tenant would need to be provided with a key that will grant them access to their apartment only. The samekeying situation would exist in any form of a multi family housing complex.Residential Construction Keying (RCK): RCK (also referred to as loss ball) by design allows the use of a temporary masterkey during the construction phase of a project. At the end of the construction phase, the use of the homeowner key will triggerthe lost ball construction device, thus eliminating the temporary master key used during construction.Price Book 72AEffective July 18, 2011 • Rev. 7/11v

NotesviPrice Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTERMS & CONDITIONSTable of ContentsGeneral Terms and Conditionsfor Sales and ServiceTerms-2Standard Schlage ProductTerms and ConditionsTerms-4Freight Weight ChartTerms-7Schlage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terms-7Portable Security . . . . . . . . . . . . . . . . . . . . . . . . . Terms-9Product WarrantiesTerms-10Commercial Applications . . . . . . . . . . . . . . . . . . Terms-10Residential Applications . . . . . . . . . . . . . . . . . . . Terms-11Distributor Function and Location Policy Terms-11Cylinder PoliciesTerms-12Schlage Key Systems . . . . . . . . . . . . . . . . . . . . Terms-12Restricted Keyway Policy . . . . . . . . . . . . . . . . . . Terms-13Construction Core Program Policy . . . . . . . . . . . Terms-14Primus ® Sales Policy . . . . . . . . . . . . . . . . . . . . . .Terms-14Door Labeling PolicyTerms-16Master Key Shipment PolicyTerms-16Hardware FinishesTerms-17How To OrderForms and ExamplesPrice Book 72AEffective July 18, 2011 • Rev. 7/11Terms-1

Complete Locks • TERMS & CONDITIONSworkmanship for a period of 12 months from the date of shipment of the Products. CO-Series locks,AD-Series locks, AD-Series Reader Modules, WPR400, WRI400, WSM400 TK400, CT5000,PIM400, PIM401, PIB300, and PIB301 will be warranted for a period of 12 months from thedate of installation, not to exceed 24 months from the date of shipment from the factory.Company’s sole obligation under this warranty is limited to repairing or replacing, at its option,the defectiveProducts. (ii) The provisions of this limited Product warranty do not apply to Products: (A) usedfor the purposes for which they are not designed or intended;(B) which have been repaired or altered without Company's prior written consent; (C) whichhave been subjected to misuse, abuse, negligence, or accident; (D) which have been improperlystored, installed, maintained, or operated; (E) which have been used in violation of writteninstructions provided by Company to Customer; (F) which have subjected to improper temperature,humidity, or other environmental conditions; (G) which have been affected by normal wearand tear; or (H) which, based on Company's examination, do not disclose to Company's satisfactionnonconformance to the warranty.(c) (i) In the event that certain Service warranties are not attached to this Agreement or separatelyfurnished, Company warrants only to Customer that the Services will be free from defects inmaterial and workmanship for a period of 6 months from the date of completion of the particularitems of Service.Company’s sole obligation under this warranty is limited to repairing or replacing, atits option, the defective Products. (ii) The provisions of this limited Product warranty do not apply toProducts: (A) used for the purposes for which they are not designed or intended; (B) which have beenrepaired or altered without Company's prior written consent; (C) which have been subjected to misuse,abuse, negligence, or accident; (D) which have been improperly stored, installed, maintained, oroperated; (E) which have been used in violation of written instructions provided by Company toCustomer; (F) which have subjected to improper temperature, humidity, or other environmentalconditions; (G) which have been affected by normal wear and tear; or (H) which, based on Company'sexamination, do not disclose to Company's satisfaction nonconformance to the warranty.(c) (i) In the event that certain Service warranties are not attached to this Agreement or separatelyfurnished, Company warrants only to Customer that the Services will be free from defects in materialand workmanship for a period of 6 months from the date of completion of the particular items ofService. Company’s sole obligation under this warranty is limited to repairing or reperformance, at itsoption, of the Service; provided however, if repair or reperformance is either impractical or impossible,the Company will refund to Customer that portion of the price paid to the Company for the defectiveitem of Service. This warranty only applies if the company is given written notice of the defect ornonconformance by the Customer within 30 days of discovery. (ii) The provisions of this limitedService warranty does not apply to any defects or issues with the design or performance of equipmentor products not manufactured by Company, nor does it apply to any code compliance or permitrequirements for the assembly, installation, erection, or construction of any goods.(d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TOTHE PRODUCTS OR SERVICES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.(e) The following costs and expenses are not covered by the provisions of these limited warranties:(i) labor costs for the removal and reinstallation of Products or other manufacturer’s products;(ii) shipping and freight expenses required to return Products to Company; (iii) normal maintenance;and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anythingother than defects in Company’s material (products only) or workmanship.11. CUSTOMER'S REMEDIES. THE CUSTOMER'S EXCLUSIVE AND SOLE REMEDYON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF PRODUCTS ORSERVICES THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO (A) SECUREREPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR ORREPERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICEPAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENTWILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FORTHE PRODUCTS OR ITEM OF SERVICE.12. LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE FORINCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGESINCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICEINTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, INTEREST, LOSTGOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BYREASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OFOPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, WHETHER BASED ONCONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICTLIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGES.13. STATUTE OF LIMITATIONS. NO ACTION ARISING OUT OF ANY CLAIMEDBREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMERMORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.14. CONSUMER PRODUCTS. With respect to “consumer products” as defined under theMagnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states donot allow limitations on how long an implied warranty lasts, so the above limitation may not apply toyou. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITEDTO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 10 ABOVE. (b) Somestates do not allow the exclusion or limitation of incidental or consequential damages, so the abovelimitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and youmay also have other rights which vary from state to state.15. FORCE MAJEURE. Any delay or failure of Company to perform its obligations hereunder willbe excused to the extent that it is caused by an event or occurrence beyond its control such as, by wayof example and not by way of limitation, acts of God, actions by any governmental authority (whethervalid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms,explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, but not limitedto, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inabilityto obtain power, material, labor equipment, or transportation, or court injunction or order. The deliverydate will be extended for a time equal to that of the delay and the schedule for Company’s performancewill be deemed adjusted in the individual order(s) to that effect.16. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with any attachmentsor supplements specifically referenced in this Agreement, constitutes the entire agreement between theparties hereto and supersedes all previous communications, representations, or agreements, either oralor written, between the parties hereto with respect to the subject matter hereof. No agreement orunderstanding varying or expanding this Agreement will be binding upon either party hereto unlessit is in writing and signed by a duly authorized representative thereof.17. TERMINATION. (a) This Agreement may be terminated by either party by giving 30 days'written notice to the other party in the event of failure by such other party to fulfill any of itsobligations hereunder. However, if during the period of such notice, such other party remedies suchfailure, this Agreement will continue with the same force and effect as if such notice had not beengiven. (b) This Agreement may be terminated upon the written mutual consent of the parties. (c) Eitherparty may immediately terminate this Agreement by giving written notice to the other party in the eventof the happening of any of the following or any other comparable event: (i) insolvency of the otherparty; (ii) filing of a petition in bankruptcy by or against the other party; (iii) appointment of a receiveror trustee for the other party; or (iv) execution of an assignment for the benefit of creditors by the otherparty, all of which will allow Company to demand reclamation of all affected orders. (d) Except as providedin this section 17, Customer may not terminate this Agreement, in whole or in part, unlessCompany’s prior written consent is obtained and Customer agrees to pay all of Company’s cancellationcharges.18. GOVERNING LAW; VENUE; AND EXPENSES. (a) This Agreement and any disputes orcontroversies arising hereunder will be governed by and construed according to the internal laws ofthe State of Indiana, United States of America, without regard to its conflict of law principles, and notincluding the United Nations Convention on Contracts for the International Sale of Goods. (b)Jurisdiction and venue with respect to any action, proceeding, or suit in connection with this Agreementwill reside in the courts of the State of Indiana. (c) Customer agrees to pay for all expenses (includingattorney’s fees) incurred by Company in enforcing the obligations of Customer under this Agreement.19. COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, ANDNUCLEAR LIABILITY. (a) This Agreement is subject to, and Company and Customer willcomply with, all laws and export controls, regulations, rules, orders, licenses, requirements, andgovernmental requests now or hereafter in effect in the United States of America that pertain to theProducts or the initial sale of the Products or that pertain to Services. Provided however, Company isnot responsible for obtaining or maintaining any permits for the performance of Services or theverification or compliance with any code requirements relative to the performance of Services. To theextent any sale of Products or Services pursuant to this Agreement may require approval of the U.S.Government, Company’s obligations under this Agreement are conditioned upon the grant of suchapproval and upon compliance by Customer with any restrictions imposed by the U.S. Government inconnection with such approval. (b) Certain Products are noted by Company as tested by independentlaboratories for compliance with UL and/or ANSI standards. Any and all modifications or alterationsto such Products will void such certification, and Company is not liable to Customer to certify anymodified or altered Product. (c) In the event the Products are to be used in a nuclear facility, theCustomer shall, prior to such use, arrange for insurance or governmental indemnity protectingCompany against liability. The Customer hereby releases and agrees to indemnify Company and itssuppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out ofthe nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.20. NO INDUCEMENTS. The parties hereto represent to each other and each agrees that, neither itnor any person acting on its behalf has, in contravention of any applicable law, given or offered to give,or will give or offer to give, any sum of money or other material consideration to any person, directly orindirectly, as an inducement to obtain business hereunder or to influence the granting of licenses orother governmental permissions to enter into this Agreement or perform obligations hereunder.21. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, orunenforceable under any statute, regulation, ordinance, executive order, or other rule of law, thatprovision will be deemed severed to the extent necessary to comply with such statute, regulation,ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate ingood faith to arrive at an alternative arrangement approximating the original business objective of theparties. The remaining terms and conditions of this Agreement will remain in effect.22. NO IMPLIED WAIVER. The failure of either party at any time to require performance by theother party of any provision of this Agreement will in no way affect the right to require suchperformance at any time thereafter, nor will the waiver of either party of a breach of any provision ofthis Agreement constitute a waiver of any succeeding breach of the same or any other provision.23. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent or legalrepresentative of the other party. Neither party is authorized to create any obligation on behalf of theother party including, but not limited to, the obligation for payment of any service or warrantyobligation hereunder. (b) Neither this Agreement nor any right or obligation hereunder may betransferred or assigned by either party without the prior written approval of the other party, except thatCompany can transfer or assign this Agreement or any right or obligation (including, but not limited tothe right to receive payments for any orders) to Ingersoll-Rand Company or an Ingersoll-RandCompany entity without first obtaining Customer’s consent. (c) The rights and remedies herein reservedto Company will be cumulative and additional to any other or further rights and remedies provided atlaw or equity. (d) Customer does not have the right to setoff or to back charge against any amountswhich become payable to Company under this Agreement or otherwise. (e) The official text of thisAgreement is in the English language. If this Agreement is translated into another language, the Englishtext will govern any question with respect to interpretation. (f) The headings in this Agreement are forconvenience of reference only and do not affect the meaning of this Agreement in any manner.24. DEFINITIONS. (a) “Agreement” means Ingersoll-Rand Company, Security Technologies SectorTerms and Conditions of Sale and Service. (b) “Company” means Ingersoll-Rand Company, SecurityTechnologies Sector. (c) “Customer” means the Buyer. (d) “Buyer” means the purchaser of productsor Services from Company. (e) “U.S.” means United States of America.11-5/2Price Book 72AEffective July 18, 2011 • Rev. 7/11Terms-3

TERMS & CONDITIONS • Standard Schlage Product Terms and ConditionsCommercialThe following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditionscontained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of productsidentified in this Price Book.Commercial Patent Numbers:4884835507071551525585308131553336855669965604970562821656576535683127569765357157175718468572227657694725782118580981658815905947537603889660424176131966618935165166446553800656872566121416615629661970568691166905773698875170368567051562706336371594247248836D372417D372854D397993D400348D411732D426452D428324D493089This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.All prices may be subject to discount. Products considered “Specials” (“X” designated part numbers) fall outside ofstandard discount terms. Contact Customer Service for clarification.Minimum Order Size for Channel Discount:All orders less than $500.00 list shall be discounted at book net.Claims and Returns:Claims and Returns:Due to Schlage error:• Claims for shortages and/or incorrectly filled orders must be filed withCustomer Service within 30-days of receipt of material.• Incorrect order acknowledgments must be changed by faxing request toCustomer Service @ (800) 452-0665 upon receipt of acknowledgment.• Invoice adjustments must be faxed to Credit Adjustments @ (317) 810-3048within 30-days of receipt of invoice.• Returned goods will not be accepted without prior written approval fromSchlage. Credit will be based upon the Return Material Authorization (RMA)issued by Customer Service or the Ingersoll Rand Security & SafetyConsultant and final acceptance by Schlage. Returns must be prominentlymarked with the RMA number and follow return guidelines on the RMAform. Return freight cost is prepaid by the customer and reimbursed at UPSground rate.• Product considered being defective after review by the Ingersoll RandSecurity & Safety Consultant must be returned to the Schlage Lock Companyfacility in Security, Colorado accompanied by an RMA. Replacement ordersfor defective product will be entered by Customer Service at the time ofnotification.Due to Customer error:• It is the policy of the Schlage Lock Companyto not accept returns of any materials that arecorrectly furnished as per the dealer’s purchaseorder.• Return of product due to customer order erroror accommodation must be pre-arranged withthe Ingersoll Rand Security & SafetyConsultant and approved by Business UnitManager.• Returns are subject to a minimum restockingcharge of 35% for unopened cases.• Materials are not returnable.• Product must be received in original factorycondition and certified as such by SchlageReceiving.• No return freight charges will be credited.Under no circumstances is Schlage liable for incidental or consequential damages. Charge-backs will not be allowed.Freight Policy:Customer orders in excess of $7,000 Net will be shipped freight prepaid by Schlage to a single destination point in the U.S. Orders lessthan this amount will ship UPS/RPS prepaid and actual freight will be indicated on the customer’s invoice. All goods are shipped F.O.B.factory or DSC and become the customer’s property when they pass into the hands of the transportation company. Schlage reserves theright to use our choice of carrier. Schlage will ship as requested, freight collect, if the customer is willing to bear the entire expense and soindicates on the order. Other delivery options include Next Day, 2-day, and 3-day shipping.Terms-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Standard Schlage Product Terms and Conditions • TERMS & CONDITIONSCommercialDelivery:For the following:Non-Master Keyed ordersMaster Keyed ordersorNon-Master Keyed orders prominently marked on theorder to "Ship Complete"Expect this delivery:Factory items will individually be assigned ship dates based oncurrent lead times.The entire order will be assigned ship dates grouped byfactory location. Items with longest current lead times determineship date for other items from that location.All orders will be acknowledged with scheduled ship dates. Specific scheduled ship dates are not guaranteed by Schlage because of thenature of product, labor, availability of product or manufacturing conditions that might be beyond our control. Schlage will not be liablefor back charges incurred based on availability of product in accordance with acknowledged ship dates. Selected Products are availableto specific channels of distribution for 1 and 5-day delivery through the Ingersoll Rand Fast Track Program. The Ingersoll Rand FastTrack Program is subject to separate terms andconditions.Order Changes or Cancellations:Type of Product• Primus ® Keys Normal Factory ⧖ Extended FactoryType of Change • QuicKey Lead Time Items Lead Time Items1. Change to: • OK within first 5-days • OK within first 10-daysfrom receipt of order. from receipt of order.– Product, creating adifferent SKU number Not Accepted • If after 5-days, item must • If after 10-days, item must– Keying* be deleted from order(see 3, 25% handlingbe deleted from order(see 3, 50% handlingcharge will apply) and charge will apply) andentered as a new order entered as a new order(see 2). (see 2).2. Change to: • New order with normal lead-time must be generated foradditions. Same terms & conditions will be applied if– Increase quantity of Not Accepted requested so long as the original order has not beenexisting item(s)shipped.• Additions received after the original order ships must be– Add new item(s) entered as a new order and will stand-alone for lead-timeand terms & conditions.3. Change to: • OK within first 5-days • OK within first 10-days– Delete item(s)from receipt of order. from receipt of order.Not Accepted • If after 5-days, subject to • If after 10-days, subject to– Reduce quantity of handling charge of 25% of handling charge of 50% ofexisting item(s) the net price of the deleted the net price of the deleteditem(s).**item(s).**– Cancel order* Includes any change to key symbol, door identification and/or cylinder pinning.** Handling charges are billed on the original order.Notes: 1) Change orders must be faxed to Customer Care @ (800) 452-0665. Please prominently mark fax as a change orderrequest. For questions call (877) 671-7011.2) Customer Service will acknowledge receipt of change orders and action taken.3) Change orders resulting in handling charges require customer review prior to change being made.Price Book 72AEffective July 18, 2011 • Rev. 7/11Terms-5

TERMS & CONDITIONS • Standard Schlage Product Terms and ConditionsResidentialThe following specific product terms and conditions supersede the general terms and conditions of sale and service only to the extentprovided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in thisPrice Book will govern the sale of products identified in this Price Book.Residential Patent Numbers:507071551525585308131539514455931935598726564086356831275715717576541257694725809816581608658202905881590591891662863476297725652337565333366540274658142668025466905773692631971434777159424D372417D372854D406056D406528D426452D428324D450558D457048D457049D458829D467155D472788D487388D520331D520332D537702D541620D543435The price list in this price book supersedes and cancels all previous price lists contained in any other price books orversions thereafter. Prices shown are subject to change without notice. All prices are subject to discount. Productsconsidered “Specials” (“X” designated part numbers) fall outside of standard discount terms. Contact customerservice for clarification.Service Charges:Service charges on past due invoices (except validly disputed items) will be assessed as follows: 1 1/2% per month or the maximum allowableby law on past due amounts open as of the last day of each calendar month until the past due amounts are paid.Changes or Cancellations:Changes or cancellations to an order must be in writing and may result in additional charges for labor and/or materials. Changes may resultin a delay in the scheduled ship date. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms ofsale, including discounts, on an individual basis. Changes or deletions resulting in an order size of less than our minimum will not beaccepted. Orders for non-cataloged, special or nonstandard items may not be canceled. Factory orders may not be changed within 7 days.Claims and Returns:Claims for shortages and/or incorrectly filled orders must be filed with Customer Service within 10 days of receipt of material.Price adjustments must also be made in writing to Customer Service within 30 days from receipt of invoice. No returned goods will beaccepted without written approval from Schlage. Credit will be based upon the written authorization of the IR Schlage representative andfinal acceptance by Schlage. Such returns must be prominently marked with the return goods authorization number and shipped prepaid.Returns, if approved, will be subject to a minimum restocking charge of 35% for unopened cases received in the same condition as whensold by Schlage. Materials are not returnable. Charge-backs will not be allowed.Freight Policy:Customer orders in excess of $1,000 Net will be shipped freight prepaid by Schlage to a single destination point in the U.S. Orders lessthan this amount will ship UPS/RPS prepaid and actual freight will be indicated on the customer’s invoice. All goods are shipped F.O.B.factory or DSC and become the customer’s property when they pass into the hands of the transportation company. Schlage reserves theright to use our choice of carrier. Schlage will ship as requested, freight collect, if the customer is willing to bear the entire expense and soindicates on the order. Other delivery options include Next Day, 2-day, and 3-day shipping.Taxes:Prices do not include any present or future Federal, State or local property, license, privilege, sales, use, excise, gross receipts or other liketaxes or assessments which may result from transactions or any services performed in connection therewith.Delivery:Orders will be assigned ship dates and acknowledged accordingly, based on estimates of availability of products. Specific scheduled shipdates are not guaranteed by Schlage because of the nature of product, labor, availability of material or manufacturing conditions that mightbe beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowledgedship dates.Certifications:Schlage products, as noted in our catalog, are produced and tested by independent laboratories for compliance with UL and ANSI standards.Any field modification or alteration of product will void certification.Copyright 2008, Ingersoll-Rand CompanyAll rights reserved. Printed in U.S.A.Terms-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

SchlageFreight Weight Chart • TERMS & CONDITIONSStandard PackLock Case Avg. Wt. Cubic Case Dimensions (inches)Series Functions Quantity per Case Feet Length Width DepthKeyed 20 36 1.4 8.88 15.75 17.88A Non-keyed 20 28 1.4 8.88 15.75 17.88Dummy trim 20 8 0.6 4.75 14.38 14.55Lever designs 20 36 1.7 9 13 25.5ALKeyed & non-keyedDummy trim6625.99.31.5116.613.815.213.610.29.6B560 20 33.5 1.0 6.5 15.25 18.25B562 20 41 1.0 6.5 15.25 18.25B250PD 20 28 1.0 6.5 15.25 18.25B B252PD 20 37 1.0 6.5 15.25 18.25B600/700/800 12 36.5 0.6 6.5 12.12 13.75BABA360BA362121222250.60.66.56.512.1212.1213.7513.75BE BE365 6 33 1.0 9.25 13.5 14.125D KnobsKeyed & non-keyedDummy trim101031170.70.38.884.758.757.7515.3814.38Keyed & non-keyed 6 34 1.5 17 14 10.6ND LeversDummy trim 6 9.3 1 13.8 13.6 9.6Keyed knobs (non Orbit) 20 0 1.4 8.88 15.75 17.88Keyed levers 20 41.6 2 9 12 32Keyed Orb 20 41.6 1.4 8.88 15.75 17.88Keyless knobs (non Orbit) 20 30 1.4 8.88 15.75 17.88Keyless levers 20 41.6 2 9 12 32F Keyless Orb 20 41.6 1.4 8.88 15.75 17.88Dummy knobs 20 7.6 0.6 4.75 14.38 14.55Dummy levers 30 11.4 0.9 4.75 14.5 22.25F360 & F255E 4 23 1.4 8.5 16 17.25F362 4 24 1.4 8.5 16 17.25F393 4 22 1.4 8.5 16 17.25Keyed knobs 10 18.5 0.7 8.88 8.75 15.38Keyed levers 16 41 1.7 9 13 25.5Keyless knobs 10 18.5 0.7 8.88 8.75 15.38FA Keyless levers 16 36.2 1.7 9 13 25.5Dummy knobs 10 5 0.3 4.75 7.75 14.38Dummy levers 20 16 1.0 6.5 15.25 18.25FA360 4 33 2.1 9 16 26.25FA362 4 35 2.1 9 16 26.25FEFE395FE3756630.325.51.51.510.610.614141717H110 10 40 1.7 21.1 14.5 9.4HH153H170102043281.71.921.123.114.516.19.48.9H172 20 38 1.9 23.1 16.1 8.9Freight Weight ChartShipping weightsshown represent anapproximation of theaverage weight for anylock and are intendedonly for use inestimating transportationand tariff charges. Theyare subject to variationsdue to changes inmanufacturing ormethods of packing.continued on next pagePrice Book 72AEffective July 18, 2011 • Rev. 7/11Terms-7

TERMS & CONDITIONS • Freight Weight ChartSchlageStandard Pack (continued)Lock Case Avg. Wt. Cubic Case Dimensions (inches)Series Functions Quantity per Case Feet Length Width DepthJD60 24 35.85 0.93 13.58 12.01 8.46JD62 24 44.66 0.93 13.58 12.01 8.46JD80 24 21.04 0.55 10.87 9.73 7.48JD80 24 25.30 0.58 12.28 10.35 7.87JH60 4 20.24 0.80 11.81 7.68 13.19JH62 4 21.34 0.80 11.81 7.68 13.19JH193 4 16.06 0.80 11.02 15.35 17.91JH58 4 13.86 0.80 11.81 7.68 13.19JH59 24 26.77 1.20 16.54 13.39 8.27JI58 24 30.36 1.56 21.18 17.8 6.38Dexter JI59 12 33.88 1.10 13.58 12.8 9.84JI18 24 29.04 1.56 21.18 17.8 6.38JI19 12 34.32 1.10 13.58 12.8 9.84JT58 20 27.72 1.83 14.96 13.39 14.17Keyed Levers 24 43.12 2.24 18.11 13.39 14.17Non-keyed Levers 24 32.56 2.24 22.44 18.9 6.69Dummy Trim LeversKeyed Knobs502428.1631.461.461.2314.4112.2013.3110.6311.6514.57Non-keyed (J40) Knobs 24 31.02 1.23 12.20 10.63 14.57Non-keyed (J10) Knobs 24 25.52 1.23 12.20 10.63 14.57Dummy Trim Knobs 50 17.82 0.98 14.37 14.17 7.09Keyed Stratus knob 24 29.04 1.23 12.20 10.63 14.57Non-keyed (J40) Stratus 24 25.96 1.23 12.20 10.63 14.57Non-keyed (J10) Stratus 24 23.98 1.23 12.20 10.63 14.57Dummy Trim Stratus knob 50 15.40 0.98 14.37 14.17 7.09L400 1 1.7 0.1 6.5 5.5 3L9000 6 45 1.3 16.4 11.8 11.3S 6 18 1.5 17 14 10.6S200 6 24.5 1.5 17 14 10.6CL CL100 20 16.6 0.6 4.75 14.38 14.55CL200 20 16.6 0.6 4.75 14.38 14.55Freight Weight ChartShipping weightsshown represent anapproximation of theaverage weight for anylock and are intendedonly for use inestimating transportationand tariff charges. Theyare subject to variationsdue to changes inmanufacturing ormethods of packing.Key BlanksBox Avg. Wt. Case Avg. Wt. CaseProduct Quantity per Box Quantity per Case Cubic Feet5-Pin 50 1.5 1000 23.5 .26-Pin Classic 50 1.2 1000 24.6 .2Everest ® 50 1.75 500 17.9 .2Terms-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Portable SecurityFreight Weight Chart • TERMS & CONDITIONSPortable Security Case Case Cubic Case Dimensions (inches)Product Description Qty. Wt. Feet Length Width Depth810223 Cinch Ring Security Chain - 4' 3" 1 7.49 0.14 2.5 10 10810230 Cinch Ring Security Chain - 2' 3" 1 4.29 0.07 4.5 4.25 6.25SecurityChainsCableSecurityPadlocksHaspsKKX16 Security Chain & Padlock - 3' 5" 1 6.69 0.07 4.5 4.25 6.25KKY16 Security Chain & Padlock - 5' 6" 1 9.97 0.14 2.5 10 10KC215E130 Locking Cable SFIC (Less Cylinder) 6' x 5/8" 1 3.97 0.16 2.8 10.4 9.5KC215E220 Locking Cable KNK Cylinder 6' x 5/8" KD 1 3.93 0.16 2.8 10.4 9.5KC220E220 Locking Cable KNK Cylinder 6' x 3/4" KD 1 5.47 0.16 2.8 10.4 9.5KC215E230 Locking Cable KNK (Less Cylinder) 6' x 5/8" 1 4.1 0.16 2.8 10.4 9.5KC220E230 Locking Cable KNK (Less Cylinder) 6' x 3/4" 1 5.25 0.16 2.8 10.4 9.5KC215A230 Locking Cable KNK (Less Cylinder) 2' x 3/4" 1 2.1 0.16 2.8 10.4 9.5KC215B230 Locking Cable KNK (Less Cylinder ) 4' x 3/4" 1 4.2 0.16 2.8 10.4 9.5KC215A130 Locking Cable SFIC (Less Cylinder) 2' x 3/4" 1 2.1 0.16 2.8 10.4 9.5KC215B130 Locking Cable SFIC (Less Cylinder) 4' x 3/4" 1 4.2 0.16 2.8 10.4 9.5999201 Rekeyable Locking Cable - 6' x 5/8" (15mm) 5 17.14 1.02 12.75 8 17.25999218 Locking Key Cable - 5' x 1/2" (12mm) 5 5.71 0.29 11 5 9999225 Resettable Combination Cable - 5' x 3/8" (10mm) 5 6.66 0.31 10 6 9820406 Heavy Duty Double Loop Steel Cable - 7' x 5/8" (15mm) 5 15.01 0.84 11.25 12 10.75820413 Heavy Duty Double Loop Steel Cable - 15' x 5/8" (15mm) 4 21.12 1.14 13.13 12.25 12.25999249 Double Loop Flexible Steel Cable - 4' x 3/8" (10mm) 5 4.49 0.24 11 6.5 5.75999256 Double Loop Flexible Steel Cable - 7' x 3/8" (10mm) 5 7.01 0.32 13.75 6 6.75999263 Double Loop Flexible Steel Cable - 15' x 3/8" (10mm) 5 12.65 0.67 12.25 9.5 10999270 Double Loop Flexible Steel Cable - 30' x 3/8" (10mm) 5 22.81 0.89 10.25 11.5 13994800 Double Loop Cable (4' x 3/8") & Weather Cover Padlock 5 7.75 0.6 11 9 10.5994862 Double Loop Cable (15' x 3/8") & Weather Cover Padlock 5 15.15 0.88 12 10.75 11.75999232 Extra Large Padlock 5 14.59 0.6 14 8.25 9851226KA Round Body Solid Steel Padlock - 2" shackle 6 8.69 0.41 10.25 6.5 10.75994831 Round Body Solid Steel Padlock 2pk Keyed Alike - 2" shackle 4 13.65 0.33 8.5 9.5 7850465 Dial Combination Padlock 6 2.82 0.16 6 4.5 10.25850410 Covered Laminated Padlock 2pk Keyed Alike - 1 1/2" (40mm) 6* 7.14 0.28 6.25 8 9.75855156 Shackle-less Padlock 6 14.11 0.33 8.66 5.9 11.22KS11A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4" shackle 6 5.08 0.05 2.76 7.76 3.94KS11D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2" shackle 6 5.52 0.06 2.76 7.76 4.53KS11F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2" shackle 6 5.52 0.06 2.76 7.76 5.00KS11G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4" shackle 6 6.18 0.09 2.76 7.76 7.05KS13A2300 Brass Padlock KNK Cylinder 3/4" shackle, KD 6 6.18 0.05 2.76 7.76 3.94KS13D2300 Brass Padlock KNK Cylinder 1 1/2" shackle, KD 6 6.18 0.06 2.76 7.76 4.53KS13F2300 Brass Padlock KNK Cylinder 2" shackle, KD 6 6.62 0.06 2.76 7.76 5.00KS13G2300 Brass Padlock KNK Cylinder 4" shackle, KD 6 7.28 0.09 2.76 7.76 7.05KS21A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4" shackle 6 5.52 0.05 2.76 7.76 3.94KS21D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2" shackle 6 5.52 0.06 2.76 7.76 4.53KS21F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2" shackle 6 5.52 0.06 2.76 7.76 5.00KS21G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4" shackle 6 6.62 0.09 2.76 7.76 7.05KS23A2300 Brass Padlock KNK Cylinder 3/4" shackle, KD 6 6.18 0.09 2.76 7.76 7.05KS23D2300 Brass Padlock KNK Cylinder 1 1/2" shackle, KD 6 6.62 0.06 2.76 7.76 4.53KS23F2300 Brass Padlock KNK Cylinder 2" shackle, KD 6 6.62 0.06 2.76 7.76 5.00KS23G2300 Brass Padlock KNK Cylinder 4" shackle, KD 6 7.28 0.09 2.76 7.76 7.05KS41A1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 3/4" shackle 6 6.18 0.09 2.76 7.76 7.05KS41D1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 1 1/2" shackle 6 6.18 0.06 2.76 7.76 4.53KS41F1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 2" shackle 6 6.62 0.06 2.76 7.76 5.00KS41G1200 Chrome Plated Brass Padlock SFIC (Less Cylinder) 4" shackle 6 7.73 0.09 2.76 7.76 7.05KS43A2300 Brass Padlock KNK Cylinder 3/4" shackle, KD 6 6.62 0.09 2.76 7.76 7.05KS43A3200 Brass Padlock Full Size IC (Less Cylinder) 3/4" shackle 6 6.62 0.09 2.76 7.76 7.05KS43D2300 Brass Padlock KNK Cylinder 1 1/2" shackle, KD 6 7.28 0.06 2.76 7.76 4.53KS43D3200 Brass Padlock Full Size IC (Less Cylinder) 1 1/2" shackle 6 7.28 0.06 2.76 7.76 4.53KS43F2300 Brass Padlock KNK Cylinder 2" shackle, KD 6 7.28 0.06 2.76 7.76 5.00KS43F3200 Brass Padlock Full Size IC (Less Cylinder) 2" shackle 6 7.28 0.06 2.76 7.76 5.00KS43G2300 Brass Padlock KNK Cylinder 4" shackle, KD 6 8.39 0.09 2.76 7.76 7.05KS43G3200 Brass Padlock Full Size IC (Less Cylinder) 4" shackle 6 8.39 0.09 2.76 7.76 7.05KS72F1200 Steel Padlock SFIC (Less Cylinder) 2" shackle 6 10.6 0.10 3.27 9.29 5.59KS72F2300 Steel Padlock KNK Cylinder 2" shackle, KD 6 5.08 0.10 3.27 9.29 5.59KS72F3200 Steel Padlock Full Size IC (Less Cylinder) 2" shackle 6 5.08 0.10 3.27 9.29 5.59KS72M1200 Steel Padlock SFIC (Less Cylinder) 1" shackle 6 9.93 0.09 3.27 9.29 4.88KS72M2200 Steel Padlock KNK (Less Cylinder) 1" shackle 6 9.93 0.09 3.27 9.29 4.88KS72M3200 Steel Padlock Full Size IC (Less Cylinder) 1" shackle 6 9.93 0.09 3.27 9.29 4.88KS72F2200 Steel Padlock KNK (Less Cylinder) 2" shackle 6 10.6 0.10 3.27 9.29 5.59KS82M1200 Steel Padlock SFIC (Less Cylinder) 1" shackle 6 7.73 0.07 3.27 8.82 4.29KS82M2200 Steel Padlock KNK (Less Cylinder) 1" shackle 6 7.73 0.07 3.27 8.82 4.29KS92M1200 Steel Padlock SFIC (Less Cylinder) 1" shackle 6 9.93 0.07 3.27 8.82 4.29KS92M2200 Steel Padlock KNK (Less Cylinder) 1" shackle 6 9.93 0.07 3.27 8.82 4.29KS92M3200 Steel Padlock Full Size IC (Less Cylinder) 1" shackle 6 9.93 0.07 3.27 8.82 4.29855101 Vehicle Hasp 3 10.04 0.43 10.38 8.5 8.5855118 Flexible Steel Hasp 6 5.95 0.44 10.43 5.31 13.58855125 Center Hole Hasp 6 8.82 0.52 9.45 5.31 17.91855132 90 Degree Hasp 6 8.59 0.45 9.45 5.7 14.37855149 Steel Bar Hasp - 7 1/4" 6 9.03 0.44 10.43 5.31 13.58994848 Steel Bar Hasp - 4 1/2" 6 2.7 0.26 10 4.75 9.5* Case is 6 each 2-packs.Price Book 72AEffective July 18, 2011 • Rev. 7/11Terms-9

TERMS & CONDITIONS • Complete LocksProduct Warranties: Commercial ApplicationsLimited WarrantySchlage Lock Company, LLC (the “Company”) extends a three year limited warranty to the original user of the products manufactured by the Company (the“Products”) against defects in material and workmanship from the date of purchase. Certain Products contain restrictions to this limited warranty, additionalwarranties, or different warranty periods. Please see below for specific Product warranty information.What The Company Will Do: Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens andencumbrances and accompanied by the statement of defects of proof of purchase, the Company will replace the Product.Original User: These warranties only apply to the Original User of Products. These warranties are not transferable.What Is Not Covered: The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but notlimited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the Company; or (iii) anyother incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to strictliability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion orlimitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have beensubjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained, repaired oroperated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature,humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not disclose to the Company’ssatisfaction non-conformance to the warranties. Additionally, the Company will not warrant ANSI A156.2 Grade 2 lever Product installed ineducational facilities and student housing.Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximumliability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by theCompany may be brought by the Original User more than one (1) year after the cause of action has arisen.How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state.SPECIFIC PRODUCT WARRANTY RESTRICTIONS/ADDITIONAL WARRANTIES:ND-Series Levers 7-Year Mechanical WarrantyThe limited warranty is for a period of seven (7) years from the date of purchase and is subject to the restrictions of these limited warranties.Small Format Interchangeable Core (SFIC) WarrantyThe limited warranty also applies to Schlage locks and housings when used with another manufacturer’s cores, or to Schlage cores (i.e, SFIC) when used in anothermanufacturer’s locks and housings. The use of unauthorized cylinder cams or other components with the Products shall void these warranties.Everest ® Primus ® and Everest Primus XP Limited Lifetime Key Breakage WarrantyA limited lifetime warranty is provided to the original user against breakage and is subject to the restrictions of these limited warranties.Portable Security Limited Lifetime WarrantyA limited lifetime warranty is provided to the original user and is subject to the restrictions of these limited warranties.Product Warranties: Residential ApplicationsLifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics WarrantySubject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronicswarranty to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as theOriginal User occupies the residential premises upon which the Product was originally installed.What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refundthe original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable.What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limitedto, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental,consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability ornegligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidentalor consequential damages, so the above exclusion or limitation may not apply to you.The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes forwhich they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored,installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to impropertemperature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfactionnon-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or otherchemicals.Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus,finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability inconnection with the Product. Schlage’s maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimedbreach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen.How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product isconsidered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warrantylasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty.Terms-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Product Warranties and Distribution Policy • TERMS & CONDITIONSProduct Warranties: Residential Applications (Cont.)Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks andpreparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product’s performance,the Original User may simply contact Schlage Customer Service at 888-805-9837 in the U.S. and Canada or 800-506-7866 in Mexico for assistance.Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under thiswarranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product toSchlage.Lifetime Mechanical Warranty and 5-year Finish WarrantybySubject to the terms and conditions of this warranty, Schlage Lock Company (“Schlage”) extends a lifetime limited mechanical and 5-year finish warranty to theoriginal consumer user (“Original User”) of Dexter by Schlage products (“Product”) against defects in material and workmanship, as long as the Original User occupiesthe residential premises upon which the Product was originally installed.What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refundthe original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable.What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limitedto, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental,consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patentinfringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequentialdamages, so the above exclusion or limitation may not apply to you.The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes forwhich they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored,installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to impropertemperature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction non-conformanceto the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals.Product Warranties, Additional Terms & Conditions: Commercial andResidential ApplicationsAdditional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’smaximum liability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by theCompany may be brought by the Original User more than one (1) year after the cause of action has arisen.How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state.Note:Should the Product be considered a consumer product as may be covered by the Magnusson Moss Federal Warranty Act, please be advised that:(1) Some states do not allow limitations or incidental consequential damages or how long an implied warranty lasts so that the above limitationsmay not fully apply; and (2) This warranty gives specific legal rights and a user may have other rights which may vary from state to state.For warranty service and shipping instructions contact:Schlage and Portable SecurityCommercial CustomersSchlageCustomer Care3899 Hancock ExpresswayColorado Springs, CO 80911Schlage and Portable SecurityResidential and Retail CustomersSchlageCustomer Service2119 East Kansas City RoadOlathe, KS 66061(877) 671-7011Fax (800) 452-0665(877) 671-7011(888) 805-9837 ConsumerFax (800) 366-5625The Schlage Lock Company reserves the right to make changes in designs and specifications or to make additions or improvements on itsproducts without notice and without incurring any obligation to incorporate them on products previously manufactured. The Schlage LockCompany is not responsible for any modification, addition or alteration to our products by others.Distribution Function and Location PolicyThe Schlage customer relationship includes the nonexclusive area of primary sales responsibility and the channel of distribution assigned bySchlage. It is vital to our success and for the effective management of the distribution of our products that the Schlage customer relationship, onceit is satisfactorily established between us, should not be changed without our approval. Therefore, after selection by Schlage as a distributor of oneor more of Schlage products, a customer should continue to perform that distribution function from the location of its business at the place orplaces utilized at the time of selection. A customer should not change its Schlage distribution function or establish a different or additional locationwithout the prior written consent of Schlage.Schlage reserves the right to discontinue, after appropriate notice, sale of its products to any customer which refuses to adhere tothis policy. Schlage also reserves the right to change, in its sole discretion, the number and locations of the distributors authorizedto distribute its products in any area. This determination will be based upon, among other considerations, the success or failure in developing themarket for Schlage products.Price Book 72AEffective July 18, 2011 • Rev. 7/11Terms-11

TERMS & CONDITIONS • Cylinder PoliciesSchlage Key Systems Sales PolicyDefinition-Standard keyways are C, CE, E, EF, F, FG, G, H, J, K, L. All other keyways are considered restricted.Everest, Everest Primus, Classic Primus and all other restricted keyway products (Quad, Reversed, Numbered) manufactured by theSchlage Lock Company are offered for sale by policies set forth per product type and security levels through specific channels ofdistribution. Possession of this price book or any other Schlage price book does not constitute “the right to purchase” these products.Please refer to the sales policy below for terms and condition. The term keyway(s) refer(s) to keyway, key sections or side bit milling.Standard Classic (Obverse) Key Sections- no restrictionStandard keyways are Classic (Obverse) C, CE, E, EF, F, FG, G, H, J, K, L.Everest Open (C Key Sections)Everest Open (C keyway) includes non-Primus products with Everest C keyways or key sections. Schlage only sells Everest Openproducts to commercial security professionals. Commercial security professionals purchasing Everest Open products from Schlage arepermitted to stock and to originate or duplicate keys without signature verification.Purchasers of Everest open (C) are permitted to resell the products in accordance with their distribution agreement to end users and toother commercial security dealers who have a professional locksmith on staff but are expressly prohibited from selling to:i) Any residential retail outlet.ii) Any individual or entity purchasing or selling products through any method of auction.End User Keyways - Primus / Primus XP levels 3, 4 & 9, Everest D, Everest B, Quad, Reversed, Numbered.End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer orlocksmith’s use or distribution. The facilities are described as the “ship-to” address pre-authorized by the end user via a letter ofauthorization (LOA) or face sheet (depending upon the key system type).End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Everynew end user system, using these restricted keyways, requires prior approval from the local Ingersoll Rand Security Technologies salesoffice management.Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlageaccount as the time of the sale, unless authorization has been granted in writing by the the local Ingersoll Rand Security Technologiessales office management where the end user reside.Locksmiths/ dealers’ keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235.Locksmith/ dealer key section can be sold to commercial locksmiths/ dealers only.Right to stock and sell locksmiths/ dealers restricted keyways requires the appropriate written agreement with Schlage and approval bythe local Ingersoll Rand Security Technology sale office management. Please contact you local Ingersoll Rand sale office for a copy ofthese contracts and additional information.Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy.Terms-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Cylinder Policies • TERMS & CONDITIONSRestricted Keyway PolicyEverest BAll Everest SFIC (Everest B Family) keyways are restricted.When ordering a new keying system, include the following:• Job (end-user) name, city, state and zip code.• Letter of Authorization (LOA) – Authorized ship-to address for key blanks, cores and cut keys on end-user’s official stationery.See Forms & Examples for sample letter of authorization.• Numerically defined specifications for expansion of all branches of the key system.The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to anexisting keying system, include the following:• Job (end-user) name, city, state and zip code.• Facility code previously assigned by Schlage and stamped on all existing keys and blanks.• Registry number of the keying system as established by Schlage.• Letter of authorization on end-user’s official stationery is required when:- End-user places order with new dealer.- Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.See Forms & Examples for sample letter of authorization.Bitting list (transcript) orders require a letter of authorization on the end-user’s official stationery. Prevailing prices apply.Everest DAll Everest D keyways are restricted.When ordering a new keying system, include the following:• Job (end-user) name, city, state and zip code.• Letter of Authorization (LOA) – Authorized ship-to address for all products on end-user’s official stationery. See Forms &Examples for sample letter of authorization.• Numerically defined specifications for expansion of all branches of the key system.The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to anexisting keying system, include the following:• Job (end-user) name, city, state and zip code.• Facility code previously assigned by Schlage and stamped on all existing keys and blanks.• Registry number of the keying system as established by Schlage.• Letter of authorization on end-user’s official stationery is required when:- End-user places order with new dealer.- Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.See Forms & Examples for sample letter of authorization.Quad, Numbered (“Paracentric”) and Reverse Keyway Family PolicyA letter of authorization from the end-user is required for all orders for restricted keyway plugs, 0-bitted and 1-bitted products andall key blanks. Restricted keyway products are not available keyed random. The letter of authorization must indicate the quantity,product and keyway, and be dated with six month of requested order..Allowable End User Authorizations for Restricted Keyways:The end user can authorize a dealer or distributor to order and inventory products if they so choose. This authorization requires thesubmission of a fully completed “Letter of Authorization” or “Signature Card”, depending on the product type requirements, by the enduser to Schlage.Construction Core Program PolicyFull size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less thehandling charge, will be issued upon their return to the factory. Please contact customer service for return authorization. Customers maynot deduct payment for construction cores prior to completion of their authorized return.Price Book 72AEffective July 18, 2011 • Rev. 7/11Terms-13

TERMS & CONDITIONS • Cylinder PoliciesPrimus ® / Primus XP Sales PolicyPrimus High Security cylinder products manufactured by the Schlage Lock Company are offered for sale through specific channels of distribution, basedon stocking requirements and security levels. Possession of this price book or any other Schlage price book does not constitute “the right to purchase”Primus products.Important: In stocking levels where purchase agreements are required, a fully executed purchase agreement, including initial minimum inventoryorder, must be in place before any Primus products may be quoted or purchased. Contact your Ingersoll Rand Security Technologies Consultant forspecific details.The prices contained herein apply to Primus Levels 1 through 9 with respect to the actual product. Availability of product is subjectto additional conditions as follows:PRIMUS/PRIMUS XP LEVEL 1: For retail locksmiths and Schlage dealers. Standard nationwide side bitting by keyway. Stocking level requires aseparate Primus agreement. Initial buy-in required for distributors but not for participating locksmiths. Obverse keyways only. HP, JP and LP sectionkeys are not available.PRIMUS LEVEL 1 PLUS: For retail locksmiths. A side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesaledistributor. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the wholesaler and thelocksmith. Obverse keyways only. HP, JP and LP section keys are not available. Cylinders are always furnished less key blanks (LKB).PRIMUS XP LEVEL 1 PLUS: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of the dealer physicallocation zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initialminimum inventory purchase. Obverse keyways only. Cylinders can be ordered LKB, KD, KA or MK.PRIMUS/PRIMUS XP LEVEL 2: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned todealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and aninitial minimum inventory purchase. Obverse keyways only.PRIMUS/PRIMUS XP LEVEL 3: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within 2-digit zip code(Level 3G) for orders of 60 - 1,999 Primus cylinders. Orders of fewer than 60 Primus cylinders are randomly assigned a side bitting froma small nationwide pool of side bittings (Level 3U). Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keywaysonly.PRIMUS/PRIMUS XP LEVEL 4: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within a time zone(Level 4Z) for orders of 2,000 - 3,999 Primus cylinders. A nationwide exclusive side biting (Level 4N) is assigned to key systems of 4,000 or morePrimus cylinders. This exclusivity can be purchased for a separate fee for smaller quantities of cylinders. This price book does not contain the feeschedule. Contact your Ingersoll Rand Security & Safety Consultant for specific information. Distribution through Schlage dealers and Schlagewholesale distributors. Obverse and Quad keyways only.PRIMUS LEVEL 7: For retail locksmiths. Side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor.Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the Schlage wholesaler and thelocksmith. Same as Level 1 PLUS above, but with Everest C Family keyways only.PRIMUS XP LEVEL 7: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of of the dealerphysical location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and aninitial minimum inventory purchase. All Everest key sections. Cylinders can be ordered MK, KA, KD or LKB.PRIMUS/PRIMUS XP LEVEL 8: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned todealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and aninitial minimum inventory purchase. Equivalent to Level 2 above, but with Everest C Family keyways only.PRIMUS/PRIMUS XP LEVEL 9: End user level not stocked by dealers. Key systems are assigned varying degrees of geographicallyexclusive side bittings based on a sliding scale of purchase commitment or separate fees. This price book does not contain the fee schedule. Contactyour Ingersoll Rand Security & Safety Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors.Level 9U, 9G, 9Z, and 9N are equivalent to Levels 3U, 3G, 4Z, and 4N above, but with Everest C and D Family keyways.The following side bit milling exclusivity criteria apply to both levels 3, 4 & 9:• 1- 60 cylinders-Random assignment• 61-1999 cylinders-First two digits of zip-code• 2000-3999 cylinders-Time-Zone Exclusivity (Also available for $10,000 fee for an organization whowould like this exclusivity and doesn't not meet cylinders quantity requirement).• 4000 + cylinders-Nation Wide Exclusivity.(Also available for $40,000 fee for an organization who wouldlike this exclusivity and doesn't not meet cylinders quantity requirement).Important Ordering InformationSee Forms & Examples: Primus and Everest Primus Ordering Checklist for a checklist of information required to process a Primus order. Note that, forsecurity reasons, all end user Primus levels (Level 3, 4 and 9) require a Facesheet (MS-E120) bearing an original signature. Opening orders for end userPrimus levels also require a Signature Card (MS-E130) bearing original signatures. Facesheets and signature cards are used to authenticate the end userrequest for product, therefore orders received without the correct supporting documents (or without original signatures) are subject to delays or cancellations.Blank Facesheets and Signature Cards are included in the Forms & Examples section of this price book for your reference. Additionally, electronicversion of these forms are available at www.schlage.com.The Schlage Lock Company reserves the right to make changes in designs and specifications, to make additions or improvements on its products, or todiscontinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition, or alteration to ourproducts by others.Classic KeywaysEverest ® KeywaysBuy-in Requirements-Commercial Locksmiths LevelsPrimus XPEverest Primus XPLevel 1 None N/A N/ALevel 1+ $7,500 Level 7 XP $7,500Level 2 25,000 Level 8 $25,000Terms-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

Cylinder Policies • TERMS & CONDITIONSNational Non-ExclusiveStocked by distributors and resold toend users via commercial locksmiths;All Level 1 Locksmiths have the sameside bittings.PrimusWholesaler/LocksmithExclusiveLocksmiths resellwholesaaler’s sidebitting to endusers; keys bearlocksmith IDnumber.XP DealerExclusiveOwned andstocked bydealers thenresold to endusers. Keys bearunique ID basedupon three digitszip-codeexclusivity of sidebitting.Dealer ExclusiveOwned and stocked by dealers thenresold to end users. Keys bear a uniqueID based upon time-zone exclusivity ofside-bitting.End User ExclusiveExclusivity is based on either randomassignment or on the first 2 digits of thezip code, depending on end usercommitment.End User ExclusiveExclusivity is based on either a timezone or nationwide basis, depending onend user commitment.T ypical Applications• Strip Mall Shops• Small Businesses• Upscale Homes• Small Businesses• Restaurants• Doctor's Offices• Office Buildings• Banks• Private Schools• Healthcare Residences• Educational Facilities• Healthcare Facilities• Large Office Complexes• Government Buildings• Detention Centers• FranchisesConsider Everest Open forCommercial ExclusivityPrimusWholesaler/LocksmithExclusiveLocksmiths resellwholesaaler’s sidebitting to endusers; keys bearlocksmith IDnumber.XP DealerExclusiveOwned andstocked bydealers thenresold to endusers. Keys bearunique ID basedupon three digitszip-codeexclusivity of sidebitting.Dealer ExclusiveOwned and stocked by dealers thenresold to end users. Keys bear a uniqueID based upon time-zone exclusivity ofside-bitting.End User ExclusiveExclusivity is based on either randomassignment, on the first 2 digits of thezip code, on time zone, or on anationwide basis, depending on enduser commitment.Price Book 72Effective January 31, 2011 • Rev. 1/11Terms-15

TERMS & CONDITIONSDoor Labeling Policy,Master Key Shipment Policy, E-Bolt Sales PolicyDoor Labeling PolicyNon-Master Keyed OrdersDoor labeling is NOT provided unless this service is specifically requested in writing.If requested:• Door number (and Heading, if specified) is provided on keyed and keyless product.• "To" and "From" description is NOT provided.• Lead times will be extended at least 5 additional working daysMaster Keyed OrdersDoor Labeling is provided as standard.• Door number (and Heading, if specified) is provided on keyed and keyless product.• "To" and "From" description is NOT provided.EXCEPTION: Door labeling is not provided on orders specifying Residential Master Keying (RMK) and/or Residential ConstructionKeying (RCK). If door labeling is required, Contract Master Keying and/or Contract Construction Keying charges will apply.Master Key Shipment PolicyUnless otherwise requested on the purchase order, master keys and special function keys furnished on master keyed orders (i.e. controlkeys, emergency keys, construction keys, extractor tools, lockout keys, etc.) are packed separate from the balance of the order and shippedto the location specified on the order as follows:Keyway Family of Master Key System• Classic Restricted (Numbered, Quad and Reverse)• Classic Primus (Obverse and Quad)• Everest Restricted (B and D Family)• Everest Primus (C and D Family)• Classic Open (Obverse)• Everest Open (C Family)Standard Method of Shipment2-Day Air• Tracking number is assigned to shipment• Recipient’s signature is required upon deliveryNote: Standard shipping policies do not require thesignature to be that of the individual to whom thepackage is addressed. If the addressee’s signature isrequired, please request on the purchase order to "shipmaster keys via USPS Certified, Return Receipt,Restricted Delivery". Due to its logistical requirementsfor the carrier and addressee, shipping via certifiedmail with restricted delivery will delay receipt ofmaster keys and special function keys.All goods are shipped F.O.B. factory and become the customer’s property when they pass into the hands of the transportation company.Schlage reserves the right to use our choice of carrier.Schlage Commercial products (excluding Portable Security)Default keyway is Everest C123For other optional keyways, please specifyLockneticsDefault keyway is Everest C123For other optional keyways, please specifyPortable Security - Kryptonite:default to C keyway KDFor made to order products, please specify the keying and keywaySchlage Residential: (F, B300, Dexter)Default keyway is CTerms-16Price Book 72AEffective July 18, 2011 • Rev. 7/11

Hardware Finishes • TERMS & CONDITIONSHardware Finishes:Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel orother materials. Where required, a protective clear coating is applied and cured under high temperature. It is important that climaticconditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strongcorrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity andpreservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organicfinishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not becleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap andbuffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaningor preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance,regardless of base metal of finishing process. A, AL, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based materialand are plated to match finishes indicated. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar inappearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders Hardware ManufacturersAssociation) industry standard.Finish Codes and Descriptions:The nearest old U.S. equivalent code designations are shown in parenthesis ( ).Symbol Description505 Bright Brass605 (3) BRIGHT BRASS, Clear Coated606 (4) SATIN BRASS, Clear Coated609 (5) ANTIQUE BRASS, Satin Brass, Blackened,Satin Relieved, Clear Coated610 (7) BRIGHT BRASS, Blackened,Bright Relieved, Clear Coated611 (9) BRIGHT BRONZE, Clear Coated612 (10) SATIN BRONZE, Clear Coated613* (10B) OIL RUBBED BRONZE, Oxidized SatinBronze, Oil Rubbed, No Coating616 (11) ANTIQUE BRONZE, Satin Bronze, Blackened,Satin Relieved, Clear Coated619 (15) SATIN NICKEL, Satin Nickel Plated,Clear CoatedSymbol Description620 (15A) ANTIQUE PEWTER, Satin Nickel Plated, Blackened,Satin Relieved, Clear Coated622 MATTE BLACK, Coated625 (26) BRIGHT CHROMIUM PLATED, No Coating626 (26D) SATIN CHROMIUM PLATED, No Coating629 (32) BRIGHT STAINLESS STEEL, No Coating630 (32D) SATIN STAINLESS STEEL, No Coating716 AGED BRONZE, Clear Coated643e AGED BRONZE, Clear Coated* Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloysand forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbedbronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.Standard Finishes:Refer to each lock series section for standard finish availability. Standard finish availability varies depending on the function, design andoptions ordered.Price Book 72AEffective July 18, 2011 • Rev. 7/11Terms-17

TERMS & CONDITIONSNotesTerms-18Price Book 72AEffective July 18, 2011 • Rev. 7/11

Part Number Page Number Part Number Page Number Part Number Page NumberIndexNumerics21415 . . . . . . . . . .Tool-7820406 . . . . . . . . .PS-13850410 . . . . . . . . .PS-12855101 . . . . . . . . .PS-14855118 . . . . . . . . .PS-14855125 . . . . . . . . .PS-14855132 . . . . . . . . .PS-14855149 . . . . . . . . .PS-14855156 . . . . . . . . .PS-12994800 . . . . . . . . .PS-13994848 . . . . . . . . .PS-14994862 . . . . . . . . .PS-13995418 . . . . . . . . .PS-12996958 . . . . . . . . .PS-11996965 . . . . . . . . .PS-11996972 . . . . . . . . .PS-11997665 . . . . . . . . .PS-11997771 . . . . . . . . .PS-11997795 . . . . . . . . .PS-11997801 . . . . . . . . .PS-11997894 . . . . . . . . .PS-11998136 . . . . . . . . .PS-11998143 . . . . . . . . .PS-11998150 . . . . . . . . .PS-11998167 . . . . . . . . .PS-11998174 . . . . . . . . .PS-11998198 . . . . . . . . .PS-11998228 . . . . . . . . .PS-11998235 . . . . . . . . .PS-11998242 . . . . . . . . .PS-11998273 . . . . . . . . .PS-11998280 . . . . . . . . .PS-11998297 . . . . . . . . .PS-11998327 . . . . . . . . .PS-11998334 . . . . . . . . .PS-11998341 . . . . . . . . .PS-11998358 . . . . . . . . .PS-11998365 . . . . . . . . .PS-11998372 . . . . . . . . .PS-11998389 . . . . . . . . .PS-11998396 . . . . . . . . .PS-11998402 . . . . . . . . .PS-11998419 . . . . . . . . .PS-11998426 . . . . . . . . .PS-11998433 . . . . . . . . .PS-11998440 . . . . . . . . .PS-11999201 . . . . . . . . .PS-13999218 . . . . . . . . .PS-13999225 . . . . . . . . .PS-13999232 . . . . . . . . .PS-12999249 . . . . . . . . .PS-13999256 . . . . . . . . .PS-13999263 . . . . . . . . .PS-13999270 . . . . . . . . .PS-13999461 . . . . . . . . .PS-4, PS-13999478 . . . . . . . . .PS-4, PS-1323446339 . . . . . . .CYL-4223446347 . . . . . . .CYL-4323538077 . . . . . . .CYL-1423538085 . . . . . . .CYL-9, CYL-1446929456 . . . . . . .CYL-43006-224 . . . . . . . .CS210-701-001 . . . . . . . . .A-7, H-901-002 . . . . . . . . .A-701-008 . . . . . . . . .A-7, H-901-009 . . . . . . . . .A-7, H-901-018 . . . . . . . . .A-7, H-901-026 . . . . . . . . .A-7, H-901-053 . . . . . . . . .A-7, H-901-054 . . . . . . . . .A-7, H-901-055 . . . . . . . . .A-1101-056 . . . . . . . . .A-1101-057 . . . . . . . . .A-1101-058 . . . . . . . . .A-1101-060 . . . . . . . . .A-11, H-1301-063 . . . . . . . . .A-11, H-1301-081 . . . . . . . . .H-901-126 . . . . . . . . .AL-802-037 . . . . . . . . .CYL-2003-000 . . . . . . . . .ND-1203-030 . . . . . . . . .ND-1203-031 . . . . . . . . .ND-1203-032 . . . . . . . . .ND-1203-042 . . . . . . . . .ND-1203-044 . . . . . . . . .ND-1403-055 . . . . . . . . .ND-1403-066 . . . . . . . . .ND-14030730-001 . . . . .CYL-39030730-002 . . . . .CYL-3903-077 . . . . . . . . .ND-1404-001 . . . . . . . . .DK-804-002 . . . . . . . . .DK-804-006 . . . . . . . . .DK-804-007 . . . . . . . . .DK-804-020 . . . . . . . . .DK-1204-021 . . . . . . . . .DK-1204-022 . . . . . . . . .DK-1204-023 . . . . . . . . .DK-1204-025 . . . . . . . . .DK-1204-026 . . . . . . . . .DK-1204-030 . . . . . . . . .DK-804-031 . . . . . . . . .DK-804-032 . . . . . . . . .DK-1004-033 . . . . . . . . .DK-804-034 . . . . . . . . .DK-804-060 . . . . . . . . .AL-806-231 . . . . . . . . .CS210-707-035 . . . . . . . . .H-907-057 . . . . . . . . .H-908-000 . . . . . . . . .S200-1208-020 . . . . . . . . .S-7, S200-808-021 . . . . . . . . .S-708-027 . . . . . . . . .S-7, S200-808-030 . . . . . . . . .S-7, S200-808-032 . . . . . . . . .S200-808-033 . . . . . . . . .S200-1208-034 . . . . . . . . .S200-908-035 . . . . . . . . .S200-909-019 . . . . . . . . .CYL-609-155 . . . . . . . . .L-4009-156 . . . . . . . . .L-4009-157 . . . . . . . . .L-4009-158 . . . . . . . . .L-40Price Book 72AEffective July 18, 2011 • Rev. 7/1109-159 . . . . . . . . .L-4009-195 . . . . . . . . .CYL-609-196 . . . . . . . . .CYL-609-197 . . . . . . . . .CYL-609-198 . . . . . . . . .CYL-609-199 . . . . . . . . .CYL-609-200 . . . . . . . . .CYL-609-401 . . . . . . . . .L-3209-402 . . . . . . . . .L-3209-403 . . . . . . . . .L-3209-404 . . . . . . . . .L-3209-409 . . . . . . . . .CYL-509-410 . . . . . . . . .CYL-509-411 . . . . . . . . .CYL-509-412 . . . . . . . . .CYL-509-416 . . . . . . . . .CYL-609-418 . . . . . . . . .CYL-609-446 . . . . . . . . .L-2909-447 . . . . . . . . .L-2909-449 . . . . . . . . .L-2909-451 . . . . . . . . .L-2909-454 . . . . . . . . .L-2909-455 . . . . . . . . .L-2909-456 . . . . . . . . .L-2909-473 . . . . . . . . .L-3009-474 . . . . . . . . .L-3009-475 . . . . . . . . .L-3009-477 . . . . . . . . .L-3009-483 . . . . . . . . .L-3109-484 . . . . . . . . .L-3009-485 . . . . . . . . .L-3009-488 . . . . . . . . .L-3109-493 . . . . . . . . .L-3109-494 . . . . . . . . .L-3009-506 . . . . . . . . .L-3409-508 . . . . . . . . .L-3209-509 . . . . . . . . .L-3609-550 . . . . . . . . .L-3409-551 . . . . . . . . .L-3409-552 . . . . . . . . .L-3409-553 . . . . . . . . .L-3409-554 . . . . . . . . .L-3409-555 . . . . . . . . .L-3409-611 . . . . . . . . .L-3609-632 . . . . . . . . .L-3309-633 . . . . . . . . .L-3309-634 . . . . . . . . .L-3309-635 . . . . . . . . .L-3309-636 . . . . . . . . .L-3309-637 . . . . . . . . .L-3309-638 . . . . . . . . .L-3309-639 . . . . . . . . .L-3309-640 . . . . . . . . .L-3309-641 . . . . . . . . .L-3309-655 . . . . . . . . .L-3409-661 . . . . . . . . .L-20, L-3409-662 . . . . . . . . .L-20, L-3409-663 . . . . . . . . .L-20, L-3409-664 . . . . . . . . .L-20, L-3409-665 . . . . . . . . .L-20, L-3409-666 . . . . . . . . .L-20, L-3409-667 . . . . . . . . .L-20, L-34Bold page numbers reflect pages with pricingIndex-1

IndexPart Number Page Number Part Number Page Number Part Number Page Number09-668 . . . . . . . . .L-20, L-3409-669 . . . . . . . . .L-20, L-3409-670 . . . . . . . . .L-20, L-3409-671 . . . . . . . . .L-20, L-3409-672 . . . . . . . . .L-20, L-3409-713 . . . . . . . . .L-20, L-3409-717 . . . . . . . . .L-3409-751 . . . . . . . . .CYL-509-752 . . . . . . . . .CYL-509-753 . . . . . . . . .CYL-509-754 . . . . . . . . .CYL-509-756 . . . . . . . . .CYL-609-757 . . . . . . . . .CYL-609-764 . . . . . . . . .CYL-509-765 . . . . . . . . .CYL-509-766 . . . . . . . . .CYL-509-767 . . . . . . . . .CYL-509-774 . . . . . . . . .ND-12, CYL-4309-833 . . . . . . . . .CYL-509-834 . . . . . . . . .CYL-509-835 . . . . . . . . .CYL-509-836 . . . . . . . . .CYL-509-900 . . . . . . . . .L-3609-904 . . . . . . . . .L-3609-905 . . . . . . . . .L-3609-907 . . . . . . . . .L-3609-992 . . . . . . . . .CYL-5509-993 . . . . . . . . .CYL-5509-994 . . . . . . . . .CYL-5509-995 . . . . . . . . .CYL-5509-996 . . . . . . . . .CYL-5509-997 . . . . . . . . .CYL-5509-998 . . . . . . . . .CYL-5510-001 . . . . . . . . .A-4, A-8, AL-4,AL-9, B250-4,B250-7, CS210-5,CS210-9, H-5,H-11, S-4, S-9,S200-5, S200-1110-004 . . . . . . . . .A-4, A-8, AL-4,AL-9, B250-4,B250-7, H-5, H-11,S-4, S-910-013 . . . . . . . . .ND-6, ND-13, DK-5, DK-910-016 . . . . . . . . .ND-6, ND-13, DK-5, DK-910-025 . . . . . . . . .ND-6, ND-13, A-4,A-8, AL-4, AL-9,B250-4, B250-7,DK-5, DK-9, S-4,S-910-026 . . . . . . . . .A-4, A-8, AL-4,AL-9, CS210-5,CS210-9, H-5,H-11, S-4, S-9,S200-5, S200-1110-027 . . . . . . . . .A-4, A-8, AL-4,AL-9, CS210-5,CS210-9, H-5,H-11, S-4, S-9,S200-5, S200-11Bold page numbers reflect pages with pricingIndex-210-042 . . . . . . . . .ND-13, A-8, AL-9,B250-7, DK-9, S-910-055 . . . . . . . . .H-5, H-1110-058 . . . . . . . . .A-4, A-8, AL-4,AL-9, CS210-5,CS210-9, H-5,H-11, S200-5,S200-1110-064 . . . . . . . . .B500-4, B500-9,B600-5, B600-9,CS210-5, CS210-9,H-5, H-11, S200-5,S200-1110-072 . . . . . . . . .L-20, L-3510-073 . . . . . . . . .L-20, L-3510-075 . . . . . . . . .L-20, L-3510-078 . . . . . . . . .L-21, L-3510-079 . . . . . . . . .L-21, L-3510-087 . . . . . . . . .B500-4, B500-9,B600-5, B600-910-091 . . . . . . . . .L-3510-092 . . . . . . . . .B500-4, B500-9,B600-5, B600-9,CS210-5, CS210-9,H-5, H-11, S200-5,S200-1110-094 . . . . . . . . .B500-4, B500-9,B600-5, B600-9,CS210-5, CS210-9,S200-5, S200-1110-095 . . . . . . . . .B500-4, B500-9,B600-5, B600-9,CS210-5, CS210-9,H-5, H-11, S200-5,S200-1110-103 . . . . . . . . .B500-4, B500-9,B600-5, B600-910-104 . . . . . . . . .B500-4, B500-9,B600-5, B600-910-108 . . . . . . . . .B500-4, B500-910-109 . . . . . . . . .CS210-9, S200-5,S200-1110-110 . . . . . . . . .CS210-9, S200-5,S200-1110-111 . . . . . . . . .CS210-9, S200-5,S200-1110-112 . . . . . . . . .B500-9, B600-9,CS210-9, S200-1110-121 . . . . . . . . .CS210-510-122 . . . . . . . . .CS210-510-123 . . . . . . . . .CS210-510-124 . . . . . . . . .CS210-510-250 . . . . . . . . .H-5, H-1110-251 . . . . . . . . .CS210-9, H-5,H-11, S200-5,S200-1110-252 . . . . . . . . .H-5, H-1110-253 . . . . . . . . .CS210-9, H-5,H-11, S200-5,S200-1110-255 . . . . . . . . .H-5, H-11Price Book 72AEffective July 18, 2011 • Rev. 7/1110-256 . . . . . . . . .CS210-9, H-5,H-11, S200-5,S200-1110-257 . . . . . . . . .CS210-9, H-5,H-11, S200-5,S200-1110-258 . . . . . . . . .CS210-9, H-5,H-11, S200-5,S200-1110-259 . . . . . . . . .CS210-9, H-5,H-11, S200-5,S200-1111-068 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-069 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-085 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-088 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-091 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-092 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-096 . . . . . . . . .A-4, A-8, AL-4,AL-911-103 . . . . . . . . .A-4, A-8, AL-4,AL-911-104 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-105 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-110 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-111 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-112 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-113 . . . . . . . . .A-4, A-8, AL-4,AL-9, H-4, H-1011-116 . . . . . . . . .A-4, A-8, AL-4,AL-911-118 . . . . . . . . .A-4, A-8, AL-4,AL-912-100 . . . . . . . . .B250-4, B250-712-103 . . . . . . . . .B250-4, B250-712-237 . . . . . . . . .H-4, H-1012-238 . . . . . . . . .H-4, H-1012-239 . . . . . . . . .H-4, H-1012-240 . . . . . . . . .H-4, H-1012-287 . . . . . . . . .B500-4, B500-812-288 . . . . . . . . .B500-4, B500-8,CS210-8, S200-4,S200-1012-289 . . . . . . . . .B500-4, B500-8,CS210-8, S200-4,S200-1012-290 . . . . . . . . .B500-4, B500-812-291 . . . . . . . . .B500-4, B500-8,CS210-8, S200-4,S200-1012-294 . . . . . . . . .B500-4

Part Number Page Number Part Number Page Number Part Number Page NumberIndex12-297 . . . . . . . . .B600-5, B600-812-317 . . . . . . . . .B600-5, B600-812-617 . . . . . . . . .B600-812-618 . . . . . . . . .B600-812-625 . . . . . . . . .B600-812-626 . . . . . . . . .B500-8, B600-812-627 . . . . . . . . .B600-912-628 . . . . . . . . .B600-912-630 . . . . . . . . .B600-5, B600-812-631 . . . . . . . . .B600-5, B600-812-632 . . . . . . . . .B600-5, B600-812-633 . . . . . . . . .B500-4, B500-8,B600-5, B600-8,CS210-8, S200-4,S200-1012-640 . . . . . . . . .B600-5, B600-812-641 . . . . . . . . .B600-5, B600-812-642 . . . . . . . . .B600-5, B600-812-643 . . . . . . . . .B600-5, B600-812-650 . . . . . . . . .B600-912-651 . . . . . . . . .B600-912-652 . . . . . . . . .B600-912-653 . . . . . . . . .B600-913-047 . . . . . . . . .ND-6, ND-1313-048 . . . . . . . . .ND-6, ND-1314-001 . . . . . . . . .DK-5, DK-914-010 . . . . . . . . .ND-6, ND-13,DK-5, DK-914-019 . . . . . . . . .DK-5, DK-914-028 . . . . . . . . .ND-6, ND-13,DK-5, DK-914-042 . . . . . . . . .ND-6, ND-13,DK-5, DK-914-047 . . . . . . . . .ND-6, ND-13,DK-5, DK-914-048 . . . . . . . . .ND-6, ND-13,DK-5, DK-916-132 . . . . . . . . .CS210-8, S-4, S-9,S200-4, S200-1016-203 . . . . . . . . .S-4, S-916-204 . . . . . . . . .CS210-8, S-4, S-9,S200-4, S200-1016-228 . . . . . . . . .CS210-8, S200-4,S200-1016-480 . . . . . . . . .CS210-8, S200-4,S200-1016-481 . . . . . . . . .S200-1016-482 . . . . . . . . .S200-1016-483 . . . . . . . . .S200-1016-484 . . . . . . . . .S200-1019-055 . . . . . . . . .H-1019-056 . . . . . . . . .H-1019-057 . . . . . . . . .H-1019-058 . . . . . . . . .H-1019-059 . . . . . . . . .H-1019-060 . . . . . . . . .H-1019-061 . . . . . . . . .H-1019-062 . . . . . . . . .H-1019-063 . . . . . . . . .H-1019-064 . . . . . . . . .H-1019-065 . . . . . . . . .H-1019-066 . . . . . . . . .H-1019-067 . . . . . . . . .H-1019-068 . . . . . . . . .H-1019-069 . . . . . . . . .H-1019-070 . . . . . . . . .H-1020-001 . . . . . . . . .CYL-28, CYL-3620-002 . . . . . . . . .CYL-2820-009 . . . . . . . . .CYL-4620-013 . . . . . . . . .CYL-2920-021 . . . . . . . . .CYL-4020-022 . . . . . . . . .CYL-4020-057 . . . . . . . . .CYL-4120-059 . . . . . . . . .CYL-3220-060 . . . . . . . . .CYL-3320-061 . . . . . . . . .CYL-3220-062 . . . . . . . . .CYL-3320-071 . . . . . . . . .CYL-1620-071-XP . . . . . .CYL-1620-072 . . . . . . . . .CYL-1620-072-XP . . . . . .CYL-1620-079 . . . . . . . . .CYL-4120-090 . . . . . . . . .CYL-3320-091 . . . . . . . . .CYL-3320-188 . . . . . . . . .CYL-1620-188-XP . . . . . .CYL-1620-189 . . . . . . . . .CYL-1620-189-XP . . . . . .CYL-1620-190 . . . . . . . . .CYL-1620-190-XP . . . . . .CYL-1620-191 . . . . . . . . .CYL-1620-191-XP . . . . . .CYL-1620-200 . . . . . . . . .CYL-720-201 . . . . . . . . .CYL-720-202 . . . . . . . . .CYL-720-203 . . . . . . . . .CYL-720-204 . . . . . . . . .CYL-720-205 . . . . . . . . .CYL-720-206 . . . . . . . . .CYL-720-207 . . . . . . . . .CYL-720-208 . . . . . . . . .CYL-720-209 . . . . . . . . .CYL-720-210 . . . . . . . . .CYL-720-211 . . . . . . . . .CYL-720-212 . . . . . . . . .CYL-720-213 . . . . . . . . .CYL-720-214 . . . . . . . . .CYL-720-215 . . . . . . . . .CYL-720-216 . . . . . . . . .CYL-720-217 . . . . . . . . .CYL-720-218 . . . . . . . . .CYL-720-219 . . . . . . . . .CYL-720-220 . . . . . . . . .CYL-720-221 . . . . . . . . .CYL-720-222 . . . . . . . . .CYL-720-223 . . . . . . . . .CYL-720-224 . . . . . . . . .CYL-720-225 . . . . . . . . .CYL-720-226 . . . . . . . . .CYL-720-227 . . . . . . . . .CYL-720-228 . . . . . . . . .CYL-720-229 . . . . . . . . .CYL-720-500 . . . . . . . . .CYL-2820-500-XP . . . . . .CYL-28Price Book 72AEffective July 18, 2011 • Rev. 7/1120-501 . . . . . . . . .CYL-2820-501-XP . . . . . .CYL-2820-505 . . . . . . . . .CYL-4620-505-XP . . . . . .CYL-4620-506 . . . . . . . . .CYL-2920-506-XP . . . . . .CYL-2920-508 . . . . . . . . .CYL-2920-508-XP . . . . . .CYL-2920-509 . . . . . . . . .CYL-4020-509-XP . . . . . .CYL-4020-510 . . . . . . . . .CYL-4020-510-XP . . . . . .CYL-4020-515 . . . . . . . . .CYL-2820-515-XP . . . . . .CYL-2820-516 . . . . . . . . .CYL-4020-516-XP . . . . . .CYL-4020-517 . . . . . . . . .CYL-2820-517-XP . . . . . .CYL-2820-518 . . . . . . . . .CYL-2920-518-XP . . . . . .CYL-2920-529 . . . . . . . . .CYL-1820-529-XP . . . . . .CYL-1820-530 . . . . . . . . .CYL-1820-530-XP . . . . . .CYL-1820-531 . . . . . . . . .CYL-1820-531-XP . . . . . .CYL-1820-545 . . . . . . . . .CYL-1620-545-XP . . . . . .CYL-1620-546 . . . . . . . . .CYL-1620-546-XP . . . . . .CYL-1620-587 . . . . . . . . .CYL-2820-587-XP . . . . . .CYL-2820-589 . . . . . . . . .CYL-3020-589-XP . . . . . .CYL-3020-593 . . . . . . . . .CYL-2820-593-XP . . . . . .CYL-2820-700 . . . . . . . . .CYL-2820-700-XP . . . . . .CYL-2820-701 . . . . . . . . .CYL-2820-701-XP . . . . . .CYL-2820-705 . . . . . . . . .CYL-4620-705-XP . . . . . .CYL-4620-706 . . . . . . . . .CYL-2920-706-XP . . . . . .CYL-2920-708 . . . . . . . . .CYL-2920-708-XP . . . . . .CYL-2920-709 . . . . . . . . .CYL-4020-709-XP . . . . . .CYL-4020-710 . . . . . . . . .CYL-4020-710-XP . . . . . .CYL-4020-715 . . . . . . . . .CYL-2820-715-XP . . . . . .CYL-2820-716 . . . . . . . . .CYL-4020-716-XP . . . . . .CYL-4020-717 . . . . . . . . .CYL-2820-717-XP . . . . . .CYL-2820-718 . . . . . . . . .CYL-2920-718-XP . . . . . .CYL-2920-722 . . . . . . . . .CYL-3320-722-XP . . . . . .CYL-3320-729 . . . . . . . . .CYL-1820-729-XP . . . . . .CYL-18Bold page numbers reflect pages with pricingIndex-3

IndexPart Number Page Number Part Number Page Number Part Number Page Number20-730 . . . . . . . . .CYL-1820-730-XP . . . . . .CYL-1820-731 . . . . . . . . .CYL-1820-731-XP . . . . . .CYL-1820-740 . . . . . . . . .CYL-4220-740-XP . . . . . .CYL-4220-741 . . . . . . . . .CYL-4220-741-XP . . . . . .CYL-4220-745 . . . . . . . . .CYL-1620-745-XP . . . . . .CYL-1620-746 . . . . . . . . .CYL-1620-746-XP . . . . . .CYL-1620-757 . . . . . . . . .CYL-4120-757-XP . . . . . .CYL-4120-763 . . . . . . . . .CYL-3220-763-XP . . . . . .CYL-3220-766 . . . . . . . . .CYL-3320-766-XP . . . . . .CYL-3320-771 . . . . . . . . .CYL-3220-771-XP . . . . . .CYL-3220-776 . . . . . . . . .CYL-3220-776-XP . . . . . .CYL-3220-782 . . . . . . . . .CYL-3220-782-XP . . . . . .CYL-3220-783 . . . . . . . . .CYL-3220-783-XP . . . . . .CYL-3220-787 . . . . . . . . .CYL-2820-787-XP . . . . . .CYL-2820-789 . . . . . . . . .CYL-3020-789-XP . . . . . .CYL-3020-793 . . . . . . . . .CYL-2820-793-XP . . . . . .CYL-2820-798 . . . . . . . . .CYL-3220-798-XP . . . . . .CYL-3222-001 . . . . . . . . .CYL-1822-002 . . . . . . . . .CYL-1822-003 . . . . . . . . .CYL-1622-004 . . . . . . . . .CYL-1622-017 . . . . . . . . .CYL-1822-018 . . . . . . . . .CYL-1822-019 . . . . . . . . .CYL-1822-020 . . . . . . . . .CYL-1822-061 . . . . . . . . .CYL-1922-062 . . . . . . . . .CYL-1922-069 . . . . . . . . .CYL-1622-081 . . . . . . . . .CYL-1822-082 . . . . . . . . .CYL-1822-645 . . . . . . . . .CYL-1622-646 . . . . . . . . .CYL-1623-030 . . . . . . . . .CYL-4223-030-ICX . . . . . .Keys-1423-031 . . . . . . . . .CYL-4223-037 . . . . . . . . .CYL-2223-038 . . . . . . . . .CYL-2223-039 . . . . . . . . .CYL-2223-040 . . . . . . . . .CYL-2223-041 . . . . . . . . .CYL-2223-042 . . . . . . . . .CYL-2223-045 . . . . . . . . .CYL-222-339 . . . . . . . . . .CS210-824-567 . . . . . . . . .CYL-30Bold page numbers reflect pages with pricing24-567-XP . . . . . .CYL-3024-569 . . . . . . . . .CYL-1824-569-XP . . . . . .CYL-1824-570 . . . . . . . . .CYL-1824-570-XP . . . . . .CYL-1824-767 . . . . . . . . .CYL-3024-767-XP . . . . . .CYL-3024-769 . . . . . . . . .CYL-1824-769-XP . . . . . .CYL-1824-770 . . . . . . . . .CYL-1824-770-XP . . . . . .CYL-1825-019 . . . . . . . . .CYL-2226-021 . . . . . . . . .CYL-28, CYL-3626-023 . . . . . . . . .CYL-30, CYL-3626-064 . . . . . . . . .CYL-3226-072 . . . . . . . . .CYL-2926-073 . . . . . . . . .CYL-2926-091 . . . . . . . . .CYL-3226-094 . . . . . . . . .CYL-3226-098 . . . . . . . . .CYL-3330-001 . . . . . . . . .CYL-28, CYL-3630-002 . . . . . . . . .CYL-28, CYL-3630-004 . . . . . . . . .CYL-30, CYL-3630-005 . . . . . . . . .CYL-30, CYL-3630-007 . . . . . . . . .CYL-3230-008 . . . . . . . . .CYL-3230-010 . . . . . . . . .CYL-3230-016 . . . . . . . . .CYL-3230-021 . . . . . . . . .CYL-28, CYL-3630-022 . . . . . . . . .CYL-28, CYL-3630-030 . . . . . . . . .CYL-3230-032 . . . . . . . . .CYL-3230-120 . . . . . . . . .CYL-4230-121 . . . . . . . . .CYL-4230-137 . . . . . . . . .CYL-3230-138 . . . . . . . . .CYL-3230-140 . . . . . . . . .CYL-3233-005 . . . . . . . . .CYL-8, CYL-5333-005-R1 . . . . . .CYL-5633-007 . . . . . . . . .CYL-44, CYL-45,CYL-5333-058 . . . . . . . . .CYL-5333-059 . . . . . . . . .CYL-5333-059-149 . . . . . .CYL-5333-059-R1 . . . . . .CYL-5633-059-R1-149 . . .CYL-5633-060 . . . . . . . . .CYL-44, CYL-5333-065 . . . . . . . . .CYL-5333-065-R1 . . . . . .CYL-5633-080 . . . . . . . . .CYL-44, CYL-5333-081 . . . . . . . . .CYL-44, CYL-5333-085 . . . . . . . . .CYL-5633-086 . . . . . . . . .CYL-5633-087 . . . . . . . . .CYL-5633-088 . . . . . . . . .CYL-5633-089 . . . . . . . . .CYL-5633-119 . . . . . . . . .CYL-8, CYL-10,CYL-11, CYL-13,CYL-16, CYL-24,CYL-39, CYL-44,CYL-5333-133 . . . . . . . . .CYL-5333-134 . . . . . . . . .CYL-933-134-118 . . . . . .CYL-3933-136 . . . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-24, CYL-39,CYL-44, CYL-5333-137 . . . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-39, CYL-44,CYL-48, CYL-5333-137-R1 . . . . . .CYL-5633-138 . . . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-24, CYL-39,CYL-44, CYL-48,CYL-5333-139 . . . . . . . . .CYL-5333-154 . . . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-25, CYL-39,CYL-44, CYL-5333-155-118 . . . . . .CYL-3933-159-118 . . . . . .CYL-3933-160 . . . . . . . . .CYL-5333-162 . . . . . . . . .CYL-44, CYL-45,CYL-5333-163 . . . . . . . . .CYL-44, CYL-45,CYL-5333-167 . . . . . . . . .CYL-2433-216 . . . . . . . . .CYL-8, CYL-10,CYL-11, CYL-5333-220-118 . . . . . .CYL-3933-221 . . . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-25, CYL-39,CYL-44, CYL-5333-222 . . . . . . . . .CYL-44, CYL-5333-223 . . . . . . . . .CYL-44, CYL-5333-224 . . . . . . . . .CYL-44, CYL-45,CYL-5333-225 . . . . . . . . .CYL-44, CYL-45,CYL-5333-229-118 . . . . . .CYL-3933-231 . . . . . . . . .CYL-44, CYL-45,CYL-5333-232 . . . . . . . . .CYL-44, CYL-5333-233 . . . . . . . . .CYL-48, CYL-5333-234 . . . . . . . . .CYL-48, CYL-5333-235 . . . . . . . . .CYL-8, CYL-10,CYL-11, CYL-5333-236 . . . . . . . . .CYL-5333-406-118 . . . . . .CYL-3933-616 . . . . . . . . .CYL-48, CYL-5333-806 . . . . . . . . .CYL-48, CYL-5334-001 . . . . . . . . .CYL-50Index-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Part Number Page Number Part Number Page Number Part Number Page NumberIndex34-002 . . . . . . . . .CYL-5034-003 . . . . . . . . .CYL-5034-004 . . . . . . . . .CYL-5034-005 . . . . . . . . .CYL-5034-006 . . . . . . . . .CYL-5034-007 . . . . . . . . .CYL-5034-034 . . . . . . . . .CYL-5634-035 . . . . . . . . .CYL-5634-036 . . . . . . . . .CYL-5634-037 . . . . . . . . .CYL-5634-058 . . . . . . . . .CYL-5034-067 . . . . . . . . .CYL-5634-068 . . . . . . . . .CYL-5634-069 . . . . . . . . .CYL-5634-070 . . . . . . . . .CYL-5634-071 . . . . . . . . .CYL-5634-072 . . . . . . . . .CYL-5634-073 . . . . . . . . .CYL-5634-074 . . . . . . . . .CYL-5634-075 . . . . . . . . .CYL-5634-076 . . . . . . . . .CYL-5634-077 . . . . . . . . .CYL-5634-078 . . . . . . . . .CYL-5634-079 . . . . . . . . .CYL-5634-101 . . . . . . . . .CYL-5034-102 . . . . . . . . .CYL-5034-103 . . . . . . . . .CYL-5034-202 . . . . . . . . .CYL-5034-203 . . . . . . . . .CYL-5034-204 . . . . . . . . .CYL-5034-205 . . . . . . . . .CYL-5034-206 . . . . . . . . .CYL-5034-207 . . . . . . . . .CYL-5034-208 . . . . . . . . .CYL-5034-209 . . . . . . . . .CYL-5034-300 . . . . . . . . .CYL-5034-301 . . . . . . . . .CYL-5034-302 . . . . . . . . .CYL-5034-303 . . . . . . . . .CYL-5034-304 . . . . . . . . .CYL-5034-305 . . . . . . . . .CYL-5034-306 . . . . . . . . .CYL-5034-307 . . . . . . . . .CYL-5034-308 . . . . . . . . .CYL-5034-309 . . . . . . . . .CYL-5034-401 . . . . . . . . .CYL-50, Tool-834-800 . . . . . . . . .CYL-5134-801 . . . . . . . . .CYL-5134-802 . . . . . . . . .CYL-5134-803 . . . . . . . . .CYL-5134-804 . . . . . . . . .CYL-5134-805 . . . . . . . . .CYL-5134-806 . . . . . . . . .CYL-5134-807 . . . . . . . . .CYL-5134-808 . . . . . . . . .CYL-5134-809 . . . . . . . . .CYL-5134-902 . . . . . . . . .CYL-5134-903 . . . . . . . . .CYL-5134-904 . . . . . . . . .CYL-5134-905 . . . . . . . . .CYL-5134-906 . . . . . . . . .CYL-5134-907 . . . . . . . . .CYL-5134-908 . . . . . . . . .CYL-5134-909 . . . . . . . . .CYL-5134-910 . . . . . . . . .CYL-5134-911 . . . . . . . . .CYL-5134-912 . . . . . . . . .CYL-5134-913 . . . . . . . . .CYL-5134-914 . . . . . . . . .CYL-5134-915 . . . . . . . . .CYL-5134-916 . . . . . . . . .CYL-5134-917 . . . . . . . . .CYL-5134-918 . . . . . . . . .CYL-5134-919 . . . . . . . . .CYL-5134-950 . . . . . . . . .CYL-5134-952 . . . . . . . . .CYL-5135-000 . . . . . . . . .Keys-1035-001 . . . . . . . . .Keys-1035-002 . . . . . . . . .Keys-4, Keys-2135-003 . . . . . . . . .Keys-4, Keys-2135-004 . . . . . . . . .Keys-8, Keys-2135-004-XP . . . . . .Keys-935-005 . . . . . . . . .Keys-8, Keys-2135-005-XP . . . . . .Keys-935-006 . . . . . . . . .Keys-835-006-XP . . . . . .Keys-935-007 . . . . . . . . .Keys-435-008 . . . . . . . . .Keys-1035-009 . . . . . . . . .Keys-4, Keys-2135-012 . . . . . . . . .Keys-835-012-XP . . . . . .Keys-935-013 . . . . . . . . .Keys-835-013-XP . . . . . .Keys-935-015 . . . . . . . . .Keys-435-016 . . . . . . . . .Keys-435-019 . . . . . . . . .Keys-835-019-XP . . . . . .Keys-935-021 . . . . . . . . .Keys-5, Keys-2235-052 . . . . . . . . .Keys-635-052-XP . . . . . .Keys-735-053 . . . . . . . . .Keys-635-053-XP . . . . . .Keys-735-056 . . . . . . . . .Keys-2, Keys-2135-057 . . . . . . . . .Keys-1035-076 . . . . . . . . .Keys-235-077 . . . . . . . . .Keys-235-079 . . . . . . . . .Keys-235-100 . . . . . . . . .Keys-2, Keys-2135-101 . . . . . . . . .Keys-2, Keys-2135-102 . . . . . . . . .Keys-235-104 . . . . . . . . .Keys-1035-110 . . . . . . . . .Keys-1035-111 . . . . . . . . .Keys-1035-115 . . . . . . . . .Keys-635-115-XP . . . . . .Keys-735-116 . . . . . . . . .Keys-635-116-XP . . . . . .Keys-735-130 . . . . . . . . .Keys-235-131 . . . . . . . . .Keys-235-135-C . . . . . . .Keys-1835-140 . . . . . . . . .Keys-235-141 . . . . . . . . .Keys-235-143 . . . . . . . . .Keys-235-144 . . . . . . . . .Keys-2Price Book 72AEffective July 18, 2011 • Rev. 7/1135-157 . . . . . . . . .Keys-6, Keys-2135-157-XP . . . . . .Keys-735-158 . . . . . . . . .Keys-6, Keys-2135-158-XP . . . . . .Keys-735-159 . . . . . . . . .Keys-635-159-XP . . . . . .Keys-735-223 . . . . . . . . .Keys-1135-224 . . . . . . . . .Keys-1135-227 . . . . . . . . .Keys-1135-228 . . . . . . . . .Keys-1135-229 . . . . . . . . .Keys-1135-250 . . . . . . . . .Keys-1035-251 . . . . . . . . .Keys-1035-310 . . . . . . . . .Keys-5, Keys-2235-401 . . . . . . . . .Keys-5, Keys-2236-031 . . . . . . . . .CL-636-056 . . . . . . . . .H-9, S200-836-066 . . . . . . . . .CYL-20, CYL-4136-067 . . . . . . . . .CYL-2036-068 . . . . . . . . .CYL-2036-069 . . . . . . . . .CYL-2036-070 . . . . . . . . .CYL-2036-071 . . . . . . . . .CYL-2036-072 . . . . . . . . .CYL-2036-079 . . . . . . . . .CYL-3736-080 . . . . . . . . .L-3936-082 . . . . . . . . .CYL-3736-083 . . . . . . . . .CYL-3736-085 . . . . . . . . .CYL-2036-086 . . . . . . . . .CYL-17, CYL-19,CYL-2037-001 . . . . . . . . .A-9, AL-10, DK-10,H-12, ND-1437-015 . . . . . . . . .L-20, L-3537-016 . . . . . . . . .B500-4, B500-9,B500-10, B600-5,B600-9, B600-10,B250-838-017 . . . . . . . . .B250-838-018 . . . . . . . . .A-9, DK-10, S-1038-031 . . . . . . . . .B250-8, B500-1038-032 . . . . . . . . .B250-838-033 . . . . . . . . .CYL-4638-034 . . . . . . . . .B500-8, B600-838-064 . . . . . . . . .DK-1038-065 . . . . . . . . .DK-1038-070 . . . . . . . . .CYL-3138-076 . . . . . . . . .DK-1238-090 . . . . . . . . .L-4138-091 . . . . . . . . .L-4138-092 . . . . . . . . .L-4138-093 . . . . . . . . .L-4138-094 . . . . . . . . .L-4138-095 . . . . . . . . .L-4139-029 . . . . . . . . .Merch-439-030 . . . . . . . . .A-8, AL-9, B250-7,B500-8, B600-8,DK-9, ND-13, S-9,S200-1039-034 . . . . . . . . .L-4139-042 . . . . . . . . .L-39, Merch-439-234 . . . . . . . . .L-41Bold page numbers reflect pages with pricingIndex-5

IndexPart Number Page Number Part Number Page Number Part Number Page Number40-015 . . . . . . . . .Tool-740-017 . . . . . . . . .Tool-740-026 . . . . . . . . .Tool-740-029 . . . . . . . . .Tool-740-030 . . . . . . . . .Tool-740-031 . . . . . . . . .Tool-740-032 . . . . . . . . .Tool-740-035 . . . . . . . . .Tool-740-049 . . . . . . . . .Tool-740-050 . . . . . . . . .Tool-740-054 . . . . . . . . .Tool-840-060 . . . . . . . . .Keys-840-060-XP . . . . . .Keys-940-061 . . . . . . . . .Keys-640-061-XP . . . . . .Keys-740-062 . . . . . . . . .Keys-640-062-XP . . . . . .Keys-740-065 . . . . . . . . .Keys-640-065-XP . . . . . .Keys-740-066 . . . . . . . . .Tool-340-070 . . . . . . . . .Tool-240-071 . . . . . . . . .Tool-440-074 . . . . . . . . .Tool-340-075 . . . . . . . . .Tool-340-090 . . . . . . . . .Tool-540-094 . . . . . . . . .Tool-540-097 . . . . . . . . .Tool-840-099 . . . . . . . . .Tool-340-100 . . . . . . . . .CYL-440-104 . . . . . . . . .Tool-340-112 . . . . . . . . .Tool-740-116 . . . . . . . . .Tool-340-119 . . . . . . . . .Tool-240-128 . . . . . . . . .Tool-440-129 . . . . . . . . .Tool-440-132 . . . . . . . . .Tool-240-133 . . . . . . . . .Tool-240-134 . . . . . . . . .Tool-240-147 . . . . . . . . .Tool-940-148 . . . . . . . . .Tool-940-149 . . . . . . . . .Tool-740-152 . . . . . . . . .Tool-740-153 . . . . . . . . .Tool-740-154 . . . . . . . . .Tool-740-155 . . . . . . . . .Tool-740-157 . . . . . . . . .Tool-740-158 . . . . . . . . .Tool-740-159 . . . . . . . . .Tool-740-160 . . . . . . . . .Tool-1040-161 . . . . . . . . .Tool-1040-162 . . . . . . . . .Tool-1040-163 . . . . . . . . .Tool-1040-164 . . . . . . . . .Tool-1040-165 . . . . . . . . .Tool-1040-166 . . . . . . . . .Tool-1040-167 . . . . . . . . .Tool-1040-168 . . . . . . . . .Tool-1040-169 . . . . . . . . .Tool-1040-170 . . . . . . . . .Tool-1040-171 . . . . . . . . .Tool-440-172 . . . . . . . . .Tool-440-173 . . . . . . . . .Tool-4Bold page numbers reflect pages with pricingIndex-640-175 . . . . . . . . .Tool-740-176 . . . . . . . . .Tool-740-177 . . . . . . . . .Tool-740-178 . . . . . . . . .Tool-740-179 . . . . . . . . .Tool-740-181 . . . . . . . . .Tool-440-500 . . . . . . . . .CYL-440-500-XP . . . . . .CYL-440-700 . . . . . . . . .CYL-440-700-XP . . . . . .CYL-441-005 . . . . . . . . .A-4, A-9, AL-4,AL-1043-005 . . . . . . . . .ND-6, ND-13, DK-5, DK-1044-070 . . . . . . . . .Merch-344-104 . . . . . . . . .Merch-344-105 . . . . . . . . .Merch-344-106 . . . . . . . . .Merch-344-107 . . . . . . . . .Merch-344-108 . . . . . . . . .Merch-344-109 . . . . . . . . .Merch-344-110 . . . . . . . . .Merch-344-111 . . . . . . . . .Merch-344-112 . . . . . . . . .Merch-344-113 . . . . . . . . .Merch-344-115 . . . . . . . . .Merch-344-119 . . . . . . . . .Merch-344-120 . . . . . . . . .Merch-344-121 . . . . . . . . .Merch-344-132 . . . . . . . . .Merch-344-133 . . . . . . . . .Merch-344-157 . . . . . . . . .Merch-344-161 . . . . . . . . .Merch-344-162 . . . . . . . . .Merch-348-000 . . . . . . . . .Keys-1048-001 . . . . . . . . .Keys-1048-002 . . . . . . . . .Keys-448-003 . . . . . . . . .Keys-448-004 . . . . . . . . .Keys-848-004-XP . . . . . .Keys-948-005 . . . . . . . . .Keys-848-005-XP . . . . . .Keys-948-006 . . . . . . . . .Keys-848-006-XP . . . . . .Keys-948-007 . . . . . . . . .Keys-448-008 . . . . . . . . .Keys-1048-009 . . . . . . . . .Keys-448-012 . . . . . . . . .Keys-848-012-XP . . . . . .Keys-948-013 . . . . . . . . .Keys-448-015 . . . . . . . . .Keys-448-016 . . . . . . . . .Keys-448-019 . . . . . . . . .Keys-848-019-XP . . . . . .Keys-948-020 . . . . . . . . .Keys-848-020-XP . . . . . .Keys-948-021 . . . . . . . . .Keys-5, Keys-2248-052 . . . . . . . . .Keys-648-052-XP . . . . . .Keys-748-053 . . . . . . . . .Keys-648-053-XP . . . . . .Keys-748-056 . . . . . . . . .Keys-3Price Book 72AEffective July 18, 2011 • Rev. 7/1148-056-ICX . . . . . .Keys-1448-076 . . . . . . . . .Keys-348-100 . . . . . . . . .Keys-3, Keys-1748-101 . . . . . . . . .Keys-348-101-ICX . . . . . .Keys-1448-102 . . . . . . . . .Keys-348-104 . . . . . . . . .Keys-1048-113 . . . . . . . . .Keys-1048-114 . . . . . . . . .Keys-1048-115 . . . . . . . . .Keys-648-115-XP . . . . . .Keys-748-116 . . . . . . . . .Keys-648-116-XP . . . . . .Keys-748-130 . . . . . . . . .Keys-348-131 . . . . . . . . .Keys-348-140 . . . . . . . . .Keys-348-141 . . . . . . . . .Keys-348-143 . . . . . . . . .Keys-348-144 . . . . . . . . .Keys-348-157 . . . . . . . . .Keys-648-157-XP . . . . . .Keys-748-158 . . . . . . . . .Keys-648-158-XP . . . . . .Keys-748-159 . . . . . . . . .Keys-648-159-XP . . . . . .Keys-748-171 . . . . . . . . .Keys-648-171-XP . . . . . .Keys-748-172 . . . . . . . . .Keys-648-172-XP . . . . . .Keys-748-223 . . . . . . . . .Keys-1148-224 . . . . . . . . .Keys-1148-227 . . . . . . . . .Keys-1148-228 . . . . . . . . .Keys-1148-229 . . . . . . . . .Keys-1148-310 . . . . . . . . .Keys-1548-311 . . . . . . . . .Keys-1548-401 . . . . . . . . .Keys-5, Keys-2249-002 . . . . . . . . .Keys-449-003 . . . . . . . . .Keys-449-004 . . . . . . . . .Keys-849-004-XP . . . . . .Keys-949-005 . . . . . . . . .Keys-849-005-XP . . . . . .Keys-949-007 . . . . . . . . .Keys-449-009 . . . . . . . . .Keys-449-012 . . . . . . . . .Keys-849-012-XP . . . . . .Keys-949-015 . . . . . . . . .Keys-449-016 . . . . . . . . .Keys-449-020 . . . . . . . . .Keys-849-020-XP . . . . . .Keys-949-021 . . . . . . . . .Keys-549-021 . . . . . . . . .Keys-2249-022 . . . . . . . . .Keys-5, Keys-2249-052 . . . . . . . . .Keys-649-052-XP . . . . . .Keys-749-053 . . . . . . . . .Keys-649-053-XP . . . . . .Keys-749-056 . . . . . . . . .Keys-349-076 . . . . . . . . .Keys-349-100 . . . . . . . . .Keys-3, Keys-1749-101 . . . . . . . . .Keys-3

Part Number Page Number Part Number Page Number Part Number Page NumberIndex49-102 . . . . . . . . .Keys-349-115 . . . . . . . . .Keys-649-115-XP . . . . . .Keys-749-116 . . . . . . . . .Keys-649-116-XP . . . . . .Keys-749-130 . . . . . . . . .Keys-349-131 . . . . . . . . .Keys-349-140 . . . . . . . . .Keys-349-141 . . . . . . . . .Keys-349-143 . . . . . . . . .Keys-349-144 . . . . . . . . .Keys-349-157 . . . . . . . . .Keys-649-157-XP . . . . . .Keys-749-158 . . . . . . . . .Keys-649-158-XP . . . . . .Keys-749-171 . . . . . . . . .Keys-649-171-XP . . . . . .Keys-749-172 . . . . . . . . .Keys-649-172-XP . . . . . .Keys-749-223 . . . . . . . . .Keys-1149-224 . . . . . . . . .Keys-1149-227 . . . . . . . . .Keys-1149-228 . . . . . . . . .Keys-1149-229 . . . . . . . . .Keys-1149-356 . . . . . . . . .Keys-549-356 . . . . . . . . .Keys-2249-401 . . . . . . . . .Keys-5, Keys-2250-001 . . . . . . . . .Keys-1650-002 . . . . . . . . .Keys-1350-003 . . . . . . . . .Keys-1250-110 . . . . . . . . .Tool-850-120 . . . . . . . . .Keys-1950-121 . . . . . . . . .Keys-1950-122 . . . . . . . . .Keys-1950-123 . . . . . . . . .Keys-1950-210 . . . . . . . . .Keys-1650-211 . . . . . . . . .Keys-1650-212 . . . . . . . . .Keys-1650-213 . . . . . . . . .Keys-1650-214 . . . . . . . . .Keys-2050-215 . . . . . . . . .Keys-2050-216 . . . . . . . . .Keys-1350-217 . . . . . . . . .Keys-1250-219 . . . . . . . . .Keys-1250-220 . . . . . . . . .Keys-1250-221 . . . . . . . . .Keys-1250-223 . . . . . . . . .Keys-1750-224 . . . . . . . . .Keys-1750-227 . . . . . . . . .Keys-2050-228 . . . . . . . . .Keys-2050-230 . . . . . . . . .Keys-1850-231 . . . . . . . . .Keys-14, Keys-1550-232 . . . . . . . . .Keys-2050-233 . . . . . . . . .Keys-1250-280 . . . . . . . . .Keys-2350-281 . . . . . . . . .Keys-2350-600 . . . . . . . . .Keys-1951-021 . . . . . . . . .AL-851-022 . . . . . . . . .AL-851-023 . . . . . . . . .AL-851-024 . . . . . . . . .AL-851-025 . . . . . . . . .AL-851-026 . . . . . . . . .AL-851-037 . . . . . . . . .AL-1251-038 . . . . . . . . .AL-1251-039 . . . . . . . . .AL-1251-040 . . . . . . . . .AL-1251-041 . . . . . . . . .AL-1260-000 . . . . . . . . .Keys-2060-001 . . . . . . . . .Keys-2061-500 . . . . . . . . .B500-1261-501 . . . . . . . . .B500-1261-502 . . . . . . . . .B500-1261-503 . . . . . . . . .B500-1261-504 . . . . . . . . .B500-1261-505 . . . . . . . . .B500-1261-506 . . . . . . . . .B500-1261-507 . . . . . . . . .B500-1261-509 . . . . . . . . .B500-1061-509 . . . . . . . . .Keys-1061-510 . . . . . . . . .B500-10, Keys-1068-001 . . . . . . . . .S-8, S200-968-002 . . . . . . . . .S-868-003 . . . . . . . . .S-868-003 . . . . . . . . .S200-968-004 . . . . . . . . .S-8, S200-968-011 . . . . . . . . .S-868-012 . . . . . . . . .S-868-013 . . . . . . . . .S-880-033 . . . . . . . . .CYL-4380-035 . . . . . . . . .Keys-1580-036 . . . . . . . . .CYL-43, Keys-2280-037 . . . . . . . . .CYL-43, Keys-2280-043 . . . . . . . . .CYL-4380-101 . . . . . . . . .CYL-3480-102 . . . . . . . . .CYL-3480-103 . . . . . . . . .CYL-3580-104 . . . . . . . . .CYL-3480-105 . . . . . . . . .CYL-3580-108 . . . . . . . . .CYL-3480-109 . . . . . . . . .CYL-3480-110 . . . . . . . . .CYL-3480-111 . . . . . . . . .CYL-3580-112 . . . . . . . . .CYL-3480-113 . . . . . . . . .CYL-3580-115 . . . . . . . . .CYL-3480-116 . . . . . . . . .CYL-4180-129 . . . . . . . . .CYL-4180-131 . . . . . . . . .CYL-3480-132 . . . . . . . . .CYL-3480-133 . . . . . . . . .CYL-3580-134 . . . . . . . . .CYL-3480-135 . . . . . . . . .CYL-3580-138 . . . . . . . . .CYL-3480-159 . . . . . . . . .CYL-4180-301 . . . . . . . . .CYL-3480-302 . . . . . . . . .CYL-3480-303 . . . . . . . . .CYL-3580-304 . . . . . . . . .CYL-3480-305 . . . . . . . . .CYL-3580-308 . . . . . . . . .CYL-3480-329 . . . . . . . . .CYL-41Price Book 72AEffective July 18, 2011 • Rev. 7/11AA09894-001-00 . .CYL-38A09894-021-00 . .CYL-38A09897-024-00 . .CYL-38A100-045 . . . . . . .CYL-44, CYL-55A100-046 . . . . . . .CYL-44, CYL-55A100-047 . . . . . . .CYL-55A100-048 . . . . . . .CYL-44, CYL-55A100-049 . . . . . . .CYL-44, CYL-55A100-050 . . . . . . .CYL-44, CYL-55A100-051 . . . . . . .CYL-48, CYL-55A100-052 . . . . . . .CYL-44A100-053 . . . . . . .AL-11A100-054 . . . . . . .AL-11A12667-003-00 . .CYL-38A201-330 . . . . . . .A-10A201-370 . . . . . . .A-10, AL-11, H-13A201-377 . . . . . . .A-10A201-399 . . . . . . .A-10, H-13A201-406 . . . . . . .A-10, H-13A201-558 . . . . . . .A-10A201-684 . . . . . . .A-10A201-688 . . . . . . .A-10A201-690 . . . . . . .CYL-44, CYL-55A201-691 . . . . . . .CYL-55A201-698 . . . . . . .CYL-48A201-811 . . . . . . .A-12A201-812 . . . . . . .A-12A201-814 . . . . . . .A-12A201-848 . . . . . . .CYL-8, CYL-55A201-849 . . . . . . .CYL-48A201-934 . . . . . . .CYL-14A301-043 . . . . . . .CYL-45A301-337 . . . . . . .CYL-8, CYL-10,CYL-14A301-338 . . . . . . .CYL-8, CYL-14,CYL-45A301-339 . . . . . . .CYL-8, CYL-14A301-386 . . . . . . .A-10, H-13A301-387 . . . . . . .A-10, H-13A301-391 . . . . . . .A-10A301-402 . . . . . . .A-10, AL-11, H-13A301-403 . . . . . . .A-10A301-404 . . . . . . .A-10A301-405 . . . . . . .A-10A301-406 . . . . . . .A-10A301-409 . . . . . . .A-10A301-410 . . . . . . .A-10A500-001 . . . . . . .A-10A500-002 . . . . . . .A-10A501-161 . . . . . . .A-12A501-167 . . . . . . .A-10, AL-11,DK-11A501-171 . . . . . . .AL-13, DK-13,ND-16A501-305 . . . . . . .A-10, AL-11, H-13A501-311 . . . . . . .AL-11A501-498 . . . . . . .A-10A501-499 . . . . . . .A-10Bold page numbers reflect pages with pricingIndex-7

IndexPart Number Page Number Part Number Page Number Part Number Page NumberA501-565 . . . . . . .A-9, AL-10,B250-8, B500-10,B600-10, DK-10,H-12,ND-14A501-566 . . . . . . .A-9, AL-10,B250-8, B500-10,B600-10, DK-10,H-12,ND-14A501-567 . . . . . . .A-9, AL-10, DK-10A501-615 . . . . . . .A-10, AL-11, H-13A501-633 . . . . . . .A-10A501-693 . . . . . . .CYL-8, CYL-14A501-710 . . . . . . .A-10, H-13A501-721 . . . . . . .A-10, AL-11A501-746 . . . . . . .AL-13, DK-13A501-766 . . . . . . .A-10A501-767 . . . . . . .A-10A501-768 . . . . . . .A-10A501-769 . . . . . . .A-12A501-770 . . . . . . .A-12A501-783 . . . . . . .CYL-45A501-791 . . . . . . .A-10, AL-11A501-818 . . . . . . .A-12, H-14A501-874 . . . . . . .A-10, AL-11A501-901 . . . . . . .A-10, AL-11, H-13A501-941 . . . . . . .A-7, H-9A501-991 . . . . . . .CYL-8, CYL-14A508-399 . . . . . . .A-10, H-13A508-597 . . . . . . .A-10, AL-11, H-13A508-598 . . . . . . .A-11, H-13A508-600 . . . . . . .A-11, H-13A508-605 . . . . . . .A-11, H-13A508-606 . . . . . . .CYL-8, CYL-14A508-614 . . . . . . .CYL-14A508-637 . . . . . . .CYL-44A508-640 . . . . . . .A-11A508-641 . . . . . . .A-11A508-649 . . . . . . .A-12A508-650 . . . . . . .A-12A508-653 . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-24, CYL-39,CYL-44, CYL-45,CYL-54, CYL-55A508-655 . . . . . . .CYL-8, CYL-9,CYL-10, CYL-11,CYL-13, CYL-16,CYL-24, CYL-39,CYL-44, CYL-45,CYL-54, CYL-55A590-158 . . . . . . .A-11, AL-11, H-13A590-159 . . . . . . .A-11, AL-11, H-13A590-180 . . . . . . .A-11, AL-11A590-181 . . . . . . .A-11, AL-11, H-13A700-003 . . . . . . .AL-11A700-004 . . . . . . .AL-11A700-014 . . . . . . .AL-11A700-015 . . . . . . .AL-11A700-016 . . . . . . .AL-11Bold page numbers reflect pages with pricingIndex-8A700-017 . . . . . . .A-10, AL-11A700-019 . . . . . . .AL-8A700-021 . . . . . . .AL-8A700-023 . . . . . . .CYL-10, CYL-14A700-028 . . . . . . .AL-12A700-029 . . . . . . .AL-12A700-030 . . . . . . .AL-12A700-031 . . . . . . .CYL-10, CYL-14,CYL-39A700-032 . . . . . . .AL-13A700-033 . . . . . . .AL-12A700-034 . . . . . . .AL-12A700-036 . . . . . . .AL-11A700-039 . . . . . . .AL-11A700-041 . . . . . . .AL-11A700-043 . . . . . . .AL-12A700-044 . . . . . . .AL-11A700-045 . . . . . . .AL-11A700-046 . . . . . . .AL-11A700-047 . . . . . . .AL-11A700-048 . . . . . . .AL-12A700-049 . . . . . . .AL-12A700-050 . . . . . . .AL-12A700-051 . . . . . . .AL-12A700-056 . . . . . . .AL-11A700-057 . . . . . . .AL-11A710-001 . . . . . . .AL-11A710-004 . . . . . . .AL-11A710-007 . . . . . . .AL-11A710-008 . . . . . . .AL-11A710-011 . . . . . . .AL-11A710-012 . . . . . . .AL-11A710-020 . . . . . . .AL-11BB202-267 . . . . . . . CYL-20, CYL-21B202-269 . . . . . . .CYL-20, CYL-21B202-328 . . . . . . .CYL-41B202-339 . . . . . . .CYL-46B202-369 . . . . . . .CYL-20, CYL-21B202-370 . . . . . . .CYL-20, CYL-21,CYL-27B202-453 . . . . . . .CYL-20, CYL-21,CYL-27B202-509 . . . . . . .B250-10B202-517 . . . . . . .AL-13, B250-10,DK-13, ND-16B202-557 . . . . . . .CYL-20, CYL-27B202-558 . . . . . . .CYL-20, CYL-21B202-560 . . . . . . .B250-10B202-580 . . . . . . .CYL-17, CYL-20,CYL-21B202-671 . . . . . . .B250-6B202-672 . . . . . . .B250-6B202-824 . . . . . . .CYL-18B202-825 . . . . . . .CYL-18B202-957 . . . . . . .CYL-17, CYL-20,CYL-21B220-001 . . . . . . .CYL-41B220-006 . . . . . . .CYL-55B220-032 . . . . . . .CYL-20, CYL-21,CYL-27Price Book 72AEffective July 18, 2011 • Rev. 7/11B220-036 . . . . . . .CYL-20B220-043 . . . . . . .B250-10B220-050 . . . . . . .CYL-35B220-117 . . . . . . .CYL-55B220-122 . . . . . . .CYL-39B220-280 . . . . . . .CYL-55B220-282 . . . . . . .CYL-55B220-284 . . . . . . .CYL-55B220-300 . . . . . . .CYL-39B220-312 . . . . . . .CYL-39B250PD . . . . . . . .B250-3B252PD . . . . . . . .B250-3B300-108 . . . . . . .CYL-23B300-111 . . . . . . .CYL-23B300-118 . . . . . . .CYL-23B300-120 . . . . . . .CYL-23B300-130 . . . . . . .CYL-23B300-203 . . . . . . .CYL-23B300-210 . . . . . . .CYL-23B300-211 . . . . . . .CYL-23B302-001 . . . . . . .CYL-23B302-002 . . . . . . .CYL-23B302-020 . . . . . . .CYL-22B302-041 . . . . . . .B500-8B302-043 . . . . . . .CYL-17B302-045 . . . . . . .B500-8B302-220 . . . . . . .CYL-22B302-420 . . . . . . .CYL-22B302-430 . . . . . . .CYL-22B500-304 . . . . . . .CYL-23B500-305 . . . . . . .CYL-23B500-306 . . . . . . .CYL-23B502-191 . . . . . . .CYL-31, CYL-38,CYL-47B502-200 . . . . . . .CYL-41B502-209 . . . . . . .CYL-41B502-292 . . . . . . .CYL-31B502-310 . . . . . . .CYL-3B502-310-604 . . .CYL-41B502-380 . . . . . . .CYL-31B502-468 . . . . . . .CYL-31, CYL-48B502-486 . . . . . . .CYL-46B502-711 . . . . . . .B250-6B502-815 . . . . . . .B250-6B502-899 . . . . . . .CYL-3, CYL-41B502-907 . . . . . . .CYL-38, CYL-39B502-942 . . . . . . .CYL-31, CYL-48B502-943 . . . . . . .CYL-31B502-944 . . . . . . .CYL-31B502-945 . . . . . . .CYL-31B502-946 . . . . . . .CYL-46B502-948 . . . . . . .CYL-31, CYL-38,CYL-39, CYL-47B502-998 . . . . . . .S200-12B502-999 . . . . . . .CYL-20, CYL-21B520-086 . . . . . . .B250-9B520-087 . . . . . . .B250-9B520-153 . . . . . . .CYL-41B520-191 . . . . . . .CYL-47B520-223 . . . . . . .CYL-47B520-235 . . . . . . .CYL-19B520-236 . . . . . . .CYL-20, CYL-21

Part Number Page Number Part Number Page Number Part Number Page NumberIndexB520-237 . . . . . . .CYL-20, CYL-21B520-240 . . . . . . .CYL-19, CYL-27B520-242 . . . . . . .CYL-20, CYL-21B520-243 . . . . . . .CYL-20, CYL-21B520-253 . . . . . . .CYL-47B520-254 . . . . . . .CYL-47B520-256 . . . . . . .CYL-47B520-267 . . . . . . .B250-9B520-268 . . . . . . .B250-9B520-269 . . . . . . .B250-9B520-271 . . . . . . .B250-9B520-283 . . . . . . .B500-9, B600-9B520-295 . . . . . . .CYL-47B520-296 . . . . . . .CYL-47B520-298 . . . . . . .B500-11, CYL-18,CYL-26B520-309 . . . . . . .CYL-47B520-329 . . . . . . .CYL-47B520-360 . . . . . . .CYL-47B520-361 . . . . . . .CYL-41B520-366 . . . . . . .CYL-47B520-367 . . . . . . .CYL-47B520-378 . . . . . . .CYL-33, CYL-35B520-407 . . . . . . .CYL-45B520-408 . . . . . . .CYL-45B520-409 . . . . . . .CYL-45B520-483 . . . . . . .CYL-35B520-484 . . . . . . .CYL-35B520-541 . . . . . . .CYL-17, CYL-19,CYL-20B520-622 . . . . . . .B500-10, B600-10B520-648 . . . . . . .CYL-17B520-649 . . . . . . .B500-10B520-650 . . . . . . .B500-10B520-651 . . . . . . .CYL-17B520-652 . . . . . . .CYL-17B520-653 . . . . . . .CYL-17B520-662 . . . . . . .B500-11B520-663 . . . . . . .B500-11B520-667 . . . . . . .CYL-17B520-685 . . . . . . .CYL-19B520-690 . . . . . . .CYL-3, CYL-31,CYL-52, CYL-54B520-691 . . . . . . .CYL-3, CYL-31,CYL-52, CYL-54B520-692 . . . . . . .CYL-3, CYL-31,CYL-52, CYL-54B520-693 . . . . . . .CYL-31, CYL-54B520-721 . . . . . . .CYL-3, CYL-52,CYL-54B520-722 . . . . . . .CYL-3, CYL-52,CYL-54B520-723 . . . . . . .CYL-3, CYL-52,CYL-54B520-724 . . . . . . .CYL-3, CYL-52,CYL-54B520-725 . . . . . . .CYL-3, CYL-52,CYL-54B520-726 . . . . . . .CYL-3, CYL-52,CYL-54B520-727 . . . . . . .CYL-3, CYL-54B520-728 . . . . . . .CYL-46B520-729 . . . . . . .CYL-46B520-730 . . . . . . .CYL-47B520-731 . . . . . . .CYL-47B520-732 . . . . . . .CYL-47B520-733 . . . . . . .CYL-47B520-734 . . . . . . .CYL-47B520-735 . . . . . . .CYL-47B520-736 . . . . . . .CYL-47B520-737 . . . . . . .CYL-47B520-740 . . . . . . .CYL-31, CYL-38B520-741 . . . . . . .CYL-31, CYL-38B520-743 . . . . . . .CYL-31B520-744 . . . . . . .CYL-31B560BD . . . . . . . .B500-6B560BDF . . . . . . .B500-6B560GD . . . . . . . .B500-6B560GDF . . . . . . .B500-6B560J . . . . . . . . . .B500-5B560JF . . . . . . . . .B500-5B560P . . . . . . . . . .B500-3B560PF . . . . . . . . .B500-3B560R . . . . . . . . . .B500-5B560RF . . . . . . . . .B500-5B561BD . . . . . . . .B500-6B561BDF . . . . . . .B500-6B561GD . . . . . . . .B500-6B561GDF . . . . . . .B500-6B561J . . . . . . . . . .B500-5B561JF . . . . . . . . .B500-5B561P . . . . . . . . . .B500-3B561PF . . . . . . . . .B500-3B561R . . . . . . . . . .B500-5B561RF . . . . . . . . .B500-5B562BD . . . . . . . .B500-6B562GD . . . . . . . .B500-6B562J . . . . . . . . . .B500-5B562P . . . . . . . . . .B500-3B562R . . . . . . . . . .B500-5B563BD . . . . . . . .B500-6B563BDF . . . . . . .B500-6B563GD . . . . . . . .B500-6B563GDF . . . . . . .B500-6B563J . . . . . . . . . .B500-5B563JF . . . . . . . . .B500-5B563P . . . . . . . . . .B500-3B563PF . . . . . . . . .B500-3B563R . . . . . . . . . .B500-5B563RF . . . . . . . . .B500-5B571 . . . . . . . . . . .B500-3B580 . . . . . . . . . . .B500-3B580F . . . . . . . . . .B500-3B581 . . . . . . . . . . .B500-3B581F . . . . . . . . . .B500-3B590-295 . . . . . . .CYL-31B590-298 . . . . . . .CYL-3, CYL-54B590-299 . . . . . . .CYL-3, CYL-54B590-443 . . . . . . .CYL-20B600-015 . . . . . . .CYL-26B600-016 . . . . . . .CYL-26, CYL-27B600-017 . . . . . . .B600-8B600-018 . . . . . . .B500-8, B600-8Price Book 72AEffective July 18, 2011 • Rev. 7/11B600-029 . . . . . . .CYL-17, CYL-19,CYL-27B600-032 . . . . . . .CYL-19B600-040 . . . . . . .CYL-17B600-041 . . . . . . .CYL-17, CYL-19B600-045 . . . . . . .CYL-17B600-046 . . . . . . .CYL-17B600-047 . . . . . . .B500-11B600-048 . . . . . . .B500-11B600-053 . . . . . . .B500-11B600-066 . . . . . . .B500-11B600-071 . . . . . . .CYL-17, CYL-19B600-078 . . . . . . .B500-11B600-085 . . . . . . .CYL-17B600-086 . . . . . . .CYL-17B600-090 . . . . . . .CYL-26B600-092 . . . . . . .CYL-17, CYL-26B600-100 . . . . . . .B500-11B600-106 . . . . . . .CYL-17, CYL-27B600-107 . . . . . . .CYL-17, CYL-27,CYL-41B600-108 . . . . . . .CYL-17, CYL-27B610-014 . . . . . . .CYL-17, CYL-27B610-024 . . . . . . .CYL-26B610-025 . . . . . . .CYL-26B610-027 . . . . . . .CYL-27B610-028 . . . . . . .CYL-17, CYL-27B610-031 . . . . . . .CYL-17, CYL-27B610-032 . . . . . . .CYL-17, CYL-27B610-035 . . . . . . .B600-8B610-040 . . . . . . .CYL-17, CYL-27B610-041 . . . . . . .CYL-17, CYL-26,CYL-27B610-042 . . . . . . .CYL-26B610-049 . . . . . . .B600-10B610-050 . . . . . . .B600-10B610-051 . . . . . . .B600-10B610-053 . . . . . . .B600-10B610-054 . . . . . . .B600-10B610-055 . . . . . . .B600-10B610-056 . . . . . . .B600-10B610-059 . . . . . . .B600-11B610-061 . . . . . . .B600-11B610-062 . . . . . . .B600-11B610-063 . . . . . . .B600-11B610-064 . . . . . . .B600-11B610-065 . . . . . . .B600-11B610-065 . . . . . . .B600-11B610-066 . . . . . . .B600-10B610-071 . . . . . . .CYL-26B610-082 . . . . . . .CYL-24, CYL-25,CYL-26B610-083 . . . . . . .CYL-24, CYL-25,CYL-26B610-084 . . . . . . .CYL-24, CYL-25,CYL-26B610-085 . . . . . . .CYL-24B610-085 . . . . . . .CYL-24, CYL-25,CYL-26B610-086 . . . . . . .CYL-24, CYL-25,CYL-26B610-203 . . . . . . .CYL-17Bold page numbers reflect pages with pricingIndex-9

IndexPart Number Page Number Part Number Page Number Part Number Page NumberB610-204 . . . . . . .CYL-17B610-205 . . . . . . .CYL-17B610-281 . . . . . . .CYL-17, CYL-27B610-282 . . . . . . .CYL-27CC100-059 . . . . . . . DK-11C100-062 . . . . . . .DK-11C102-522 . . . . . . .DK-11C102-524 . . . . . . .DK-11C102-540 . . . . . . .DK-11C102-541 . . . . . . .DK-11C102-542 . . . . . . .DK-11C102-570 . . . . . . .DK-11C102-572 . . . . . . .DK-11C102-837 . . . . . . .DK-11C102-840 . . . . . . .DK-11C203-034 . . . . . . .DK-11C203-311 . . . . . . .A-12, AL-13,B250-10, B600-11,DK-13, ND-16,S-10, S200-12C203-312 . . . . . . .A-12, AL-13,B250-10, B600-11,DK-13, ND-16,S-10C203-376 . . . . . . .DK-11C203-390 . . . . . . .DK-11C203-391 . . . . . . .DK-11C203-411 . . . . . . .DK-11C203-726 . . . . . . .CYL-48, CYL-55C203-733 . . . . . . .DK-11C203-736 . . . . . . .AL-13, DK-13,L-42, ND-16C203-858 . . . . . . .DK-11C203-947 . . . . . . .DK-11C203-948 . . . . . . .DK-11C303-006 . . . . . . .DK-11C303-007 . . . . . . .DK-13C303-028 . . . . . . .DK-13C303-029 . . . . . . .AL-13C303-400 . . . . . . .DK-11C303-421 . . . . . . .AL-13C303-437 . . . . . . .CYL-44, CYL-45C303-438 . . . . . . .AL-13C303-439 . . . . . . .DK-11, ND-15,C503-008 . . . . . . .A-11, DK-11, H-13C503-019 . . . . . . .DK-11, ND-15C503-113 . . . . . . .CYL-50C503-115 . . . . . . .CYL-42, CYL-50C503-116 . . . . . . .CYL-50C503-118 . . . . . . .CYL-42, CYL-50C503-308 . . . . . . .AL-11, DK-11C503-314 . . . . . . .DK-11C503-324 . . . . . . .DK-11C503-331 . . . . . . .ND-15C503-334 . . . . . . .DK-11C503-335 . . . . . . .DK-11C503-339 . . . . . . .DK-11C503-346 . . . . . . .CYL-48C503-359 . . . . . . .DK-11Bold page numbers reflect pages with pricingIndex-10C503-360 . . . . . . .DK-11C503-361 . . . . . . .DK-11C503-362 . . . . . . .DK-11C503-368 . . . . . . .DK-11C503-371 . . . . . . .DK-12C503-400 . . . . . . .DK-12C503-403 . . . . . . .DK-8C503-737 . . . . . . .DK-12C503-746 . . . . . . .DK-8C503-767 . . . . . . .CYL-14C503-768 . . . . . . .DK-12C503-775 . . . . . . .DK-12C503-833 . . . . . . .CYL-50C503-940 . . . . . . .DK-8C503-965 . . . . . . .DK-12C504-114 . . . . . . .CYL-51C504-116 . . . . . . .CYL-51C603-098 . . . . . . .CYL-26C603-195 . . . . . . .CYL-14C603-256 . . . . . . .A-12, AL-13,B250-9, B600-10,DK-13, ND-16,S-10C603-262 . . . . . . .DK-8C603-500 . . . . . . .DK-12C603-524 . . . . . . .CYL-14C603-569 . . . . . . .DK-8C603-623 . . . . . . .B250-7C603-827 . . . . . . .CYL-42, CYL-50C603-897 . . . . . . .A-12, AL-13,B250-9, B500-11,B600-10, DK-13,ND-16, S-10,S200-12C603-936 . . . . . . .CYL-51C603-950 . . . . . . .CYL-50C603-951 . . . . . . .CYL-50C603-952 . . . . . . .CYL-50C603-956 . . . . . . .CYL-42C603-964 . . . . . . .CYL-42C603-967 . . . . . . .CYL-42C604-050 . . . . . . .CYL-48C604-051 . . . . . . .CYL-48C604-052 . . . . . . .CYL-48C604-053 . . . . . . .CYL-48C604-088 . . . . . . .CYL-48C604-088 . . . . . . .CYL-48C604-089 . . . . . . .CYL-48C604-106 . . . . . . .CYL-10, CYL-14C604-107 . . . . . . .CYL-10, CYL-14C604-144 . . . . . . .CYL-14C604-187 . . . . . . .DK-12, ND-15C604-188 . . . . . . .DK-12, ND-15C604-191 . . . . . . .DK-12, ND-15C604-204 . . . . . . .DK-12C604-205 . . . . . . .DK-12C604-226 . . . . . . .CYL-48C604-234 . . . . . . .CYL-48C604-243 . . . . . . .CYL-9, CYL-10,CYL-11, CYL-14,CYL-39, CYL-44,CYL-45Price Book 72AEffective July 18, 2011 • Rev. 7/11C604-268 . . . . . . .CYL-48C604-269 . . . . . . .CYL-48C604-271 . . . . . . .CYL-48C604-273 . . . . . . .AL-11, DK-12C604-307 . . . . . . .A-7, H-9C604-312 . . . . . . .DK-12C604-333 . . . . . . .DK-8C604-334 . . . . . . .CYL-33C604-340 . . . . . . .ND-15C604-348 . . . . . . .CYL-11, CYL-14C604-354 . . . . . . .AL-11C604-362 . . . . . . .CYL-14C604-368 . . . . . . .CYL-14C604-369 . . . . . . .CYL-14C604-371 . . . . . . .CYL-14C604-372 . . . . . . .CYL-14C604-381 . . . . . . .AL-8C604-395 . . . . . . .AL-13C604-400 . . . . . . .AL-11C604-402 . . . . . . .AL-11C604-419 . . . . . . .CYL-48C604-524 . . . . . . .CYL-9, CYL-10,CYL-14, CYL-39C607-062 . . . . . . .CYL-45CL10-301 . . . . . . .CL-6, CYL-15CL10-350 . . . . . . .CL-6CL10-352 . . . . . . .CL-6CL10-354 . . . . . . .CL-5, CL-6CL10-355 . . . . . . .CL-5, CL-6CL10-360 . . . . . . .CL-7, CYL-13CL10-360 . . . . . . .CYL-15CL10-361 . . . . . . .CL-7, CYL-15CL10-362 . . . . . . .CL-7, CYL-15CL154PB . . . . . . .CL-2CL154PB-XP . . . .CL-2CL174PB . . . . . . .CL-2CL174PB-XP . . . .CL-2CL200PB . . . . . . .CL-2CL254PB . . . . . . .CL-2CL254PB-XP . . . .CL-2CL274PB . . . . . . .CL-2CL274PB-XP . . . .CL-2CL720-3-1 . . . . . .CL-7CL720-3-2 . . . . . .CL-7CL720-3-3 . . . . . .CL-7CL720-3-4 . . . . . .CL-7CL720-3-5 . . . . . .CL-7CL720G . . . . . . . .CL-4CL721G . . . . . . . .CL-4CL725-1 . . . . . . . .CL-7CL725G . . . . . . . .CL-4CL725-SP . . . . . . .CL-7CL728G . . . . . . . .CL-4CL729G . . . . . . . .CL-4CL729S-2 . . . . . . .CL-7CL729S-3 . . . . . . .CL-7CL771G . . . . . . . .CL-4CL774R . . . . . . . . .CL-3CL774R-XP . . . . . .CL-3CL775G . . . . . . . .CL-4CL775-SP . . . . . . .CL-7CL777R . . . . . . . . .CL-3

Part Number Page Number Part Number Page Number Part Number Page NumberIndexCL7788-PA-D . . . .CL-7CL874R . . . . . . . . .CL-3CL874R-XP . . . . . .CL-3CL888R . . . . . . . . .CL-3CL920R . . . . . . . . .CL-3CL974R . . . . . . . . .CL-3CL974R-XP . . . . . .CL-3CL-ETS1 . . . . . . . .CL-7CLTR78 . . . . . . . . .CL-7CS210PD . . . . . . .CS210-4DD500-000 . . . . . . .AL-8, ND-12EE205-204 . . . . . . .CYL-20, CYL-21E505-315 . . . . . . .H-14E505-366 . . . . . . .H-14FF306-139 . . . . . . .CYL-22F506-237 . . . . . . .S-10F506-278 . . . . . . .S-10F506-359 . . . . . . .B500-11F506-868 . . . . . . .A-9, AL-10,B500-10, DK-10,S-10F506-878 . . . . . . .H-12F605-038 . . . . . . .CYL-15GG105-209 . . . . . . .H-13G105-232 . . . . . . .H-13G105-249 . . . . . . .H-13G506-815 . . . . . . .A-9, AL-10, DK-10,H-12, S-10,S200-12G570-159 . . . . . . .CYL-20, CYL-21G570-160 . . . . . . .CYL-20, CYL-21G570-232 . . . . . . .A-11, H-13JJ250-028 . . . . . . .B500-4, B500-11,B600-5KK110-020 . . . . . . .L-42K110-480 . . . . . . .CYL-54K110-550 . . . . . . .L-39K110-947 . . . . . . .L-42K510-045 . . . . . . .CYL-50K510-053 . . . . . . .L-35K510-066 . . . . . . .A-4, A-8, AL-4,AL-9, B250-4,B250-7, B600-9,DK-5, DK-9, L-35,ND-6, ND-13, S-4,S-9K510-320 . . . . . . .L-39K510-330 . . . . . . .L-36K510-389 . . . . . . .L-37K510-390 . . . . . . .L-37K510-434 . . . . . . .CYL-50K510-474 . . . . . . .CYL-33K510-680 . . . . . . .CYL-33, CYL-35,CYL-38K510-711 . . . . . . .CYL-33, CYL-35K510-730 . . . . . . .CYL-33, CYL-35,CYL-38, CYL-47K510-842 . . . . . . .L-39KC215A130 . . . . .PS-6KC215B130 . . . . .PS-6KC215E220 . . . . .PS-4KS11D1200 . . . . .PS-6KS11F1200 . . . . . .PS-6KS21D1200 . . . . .PS-6KS21F1200 . . . . . .PS-6KS23D2200 . . . . .PS-3, PS-5KS23D2300 . . . . .PS-4KS23F2200 . . . . . .PS-3, PS-3, PS-5KS23F2300 . . . . . .PS-4KS41D1200 . . . . .PS-6KS41F1200 . . . . . .PS-6KS43D2200 . . . . .PS-3KS43D2200 . . . . .PS-5KS43D2300 . . . . .PS-4KS43D3200 . . . . .PS-3, PS-7KS43F2200 . . . . . .PS-3, PS-5KS43F2300 . . . . . .PS-4KS43F3200 . . . . . .PS-3, PS-7KS72F2300 . . . . . .PS-4KZ11A10 . . . . . . . .PS-10KZ11A20 . . . . . . . .PS-10KZ11A40 . . . . . . . .PS-10KZ11D10 . . . . . . .PS-10KZ11D20 . . . . . . .PS-10KZ11D40 . . . . . . .PS-10KZ11F10 . . . . . . . .PS-10KZ11F20 . . . . . . . .PS-10KZ11F40 . . . . . . . .PS-10KZ11G10 . . . . . . .PS-10KZ11G20 . . . . . . .PS-10KZ11G40 . . . . . . .PS-10KZ12A10 . . . . . . . .PS-10KZ12A20 . . . . . . . .PS-10KZ12A40 . . . . . . . .PS-10KZ12D10 . . . . . . .PS-10KZ12D20 . . . . . . .PS-10KZ12D40 . . . . . . .PS-10KZ12F10 . . . . . . . .PS-10KZ12F20 . . . . . . . .PS-10KZ12F40 . . . . . . . .PS-10KZ12G10 . . . . . . .PS-10KZ12G20 . . . . . . .PS-10KZ12G40 . . . . . . .PS-10KZ200AL . . . . . . . .PS-9KZ31CB1 . . . . . . .PS-9KZ31CB2 . . . . . . .PS-9KZ31DA0 . . . . . . .PS-9KZ32BB0 . . . . . . .CYL-15KZ32CB1 . . . . . . .PS-9KZ32CB2 . . . . . . .PS-9Price Book 72AEffective July 18, 2011 • Rev. 7/11KZ32DA0 . . . . . . .CYL-13, CYL-15,PS-9KZ33DC0 . . . . . . .CYL-15KZ34CA0 . . . . . . .CYL-15KZ34ED0 . . . . . . .CYL-15KZ38BA1 . . . . . . .CYL-15KZ38BA2 . . . . . . .CYL-15KZ390AL . . . . . . . .PS-9, Tool-8KL0170 . . . . . . . . . . L-9, L-11, L-13,L-15L0172 . . . . . . . . . .L-9, L-11, L-13,L-15, L-17L283-003 . . . . . . .L-39L283-004 . . . . . . .L-39L283-006 . . . . . . .L-39L283-008 . . . . . . .L-39L283-010 . . . . . . .L-39L283-029 . . . . . . .L-39L283-030 . . . . . . .L-39L283-031 . . . . . . .L-39L283-039 . . . . . . .L-38L283-040 . . . . . . .L-39, L-41L283-049 . . . . . . .L-39L283-053 . . . . . . .L-37L283-055 . . . . . . .L-39L283-056 . . . . . . .L-36L283-057 . . . . . . .L-39L283-060 . . . . . . .L-37L283-061 . . . . . . .L-37L283-062 . . . . . . .L-38L283-064 . . . . . . .L-37L283-065 . . . . . . .L-37L283-075 . . . . . . .L-39L283-085 . . . . . . .L-38L283-086 . . . . . . .L-38L283-099 . . . . . . .L-38L283-100 . . . . . . .L-42L283-101 . . . . . . .L-42L283-112 . . . . . . .L-39L283-121 . . . . . . .L-42L283-122 . . . . . . .L-42L283-123 . . . . . . .L-42L283-124 . . . . . . .L-36L283-126 . . . . . . .L-38L283-127 . . . . . . .L-39L283-128 . . . . . . .L-39L283-131 . . . . . . .L-38L283-132 . . . . . . .L-38L283-133 . . . . . . .L-38L283-134 . . . . . . .L-38L283-137 . . . . . . .L-38L283-138 . . . . . . .L-38L283-139 . . . . . . .L-38L283-140 . . . . . . .L-38L283-141 . . . . . . .L-38L283-142 . . . . . . .L-38L283-143 . . . . . . .L-38L283-144 . . . . . . .L-38L283-145 . . . . . . .L-38L283-146 . . . . . . .L-38Bold page numbers reflect pages with pricingIndex-11

IndexPart Number Page Number Part Number Page Number Part Number Page NumberL283-150 . . . . . . .L-39L283-170 . . . . . . .L-38L283-171 . . . . . . .L-38L283-172 . . . . . . .L-38L283-173 . . . . . . .L-38L283-174 . . . . . . .L-38L283-175 . . . . . . .L-38L283-176 . . . . . . .L-38L283-177 . . . . . . .L-38L283-178 . . . . . . .L-38L283-180 . . . . . . .L-38L283-181 . . . . . . .L-38L283-182 . . . . . . .L-38L283-198 . . . . . . .L-37L283-199 . . . . . . .L-37L460P . . . . . . . . . .L-19L462P . . . . . . . . . .L-19L463P . . . . . . . . . .L-19L464P . . . . . . . . . .L-19L480 . . . . . . . . . . .L-19L496P . . . . . . . . . .L-19L583-004 . . . . . . .L-39L583-015 . . . . . . .L-39L583-019 . . . . . . .L-39L583-020 . . . . . . .L-39L583-021 . . . . . . .L-39L583-022 . . . . . . .L-39L583-023 . . . . . . .L-39L583-024 . . . . . . .L-39L583-025 . . . . . . .L-39L583-026 . . . . . . .L-39L583-027 . . . . . . .L-39L583-028 . . . . . . .L-39L583-029 . . . . . . .L-39L583-030 . . . . . . .L-39L583-031 . . . . . . .L-39L583-035 . . . . . . .L-39L583-038 . . . . . . .L-39L583-043 . . . . . . .L-39L583-044 . . . . . . .L-39L583-045 . . . . . . .L-39L583-047 . . . . . . .L-39L583-048 . . . . . . .L-39L583-049 . . . . . . .L-39L583-050 . . . . . . .L-40L583-051 . . . . . . .L-40L583-053 . . . . . . .L-40L583-056 . . . . . . .L-40L583-057 . . . . . . .L-40L583-058 . . . . . . .L-40L583-063 . . . . . . .L-40L583-064 . . . . . . .L-40L583-065 . . . . . . .L-40L583-066 . . . . . . .L-40L583-119 . . . . . . .L-37L583-120 . . . . . . .L-37L583-121 . . . . . . .L-37L583-122 . . . . . . .L-37L583-123 . . . . . . .L-37L583-133 . . . . . . .AL-13, L-37L583-153 . . . . . . .CYL-31, CYL-38L583-156 . . . . . . .L-40Bold page numbers reflect pages with pricingIndex-12L583-174 . . . . . . .L-40L583-187 . . . . . . .L-33L583-192 . . . . . . .L-40L583-195 . . . . . . .CYL-37L583-196 . . . . . . .L-40L583-197 . . . . . . .CYL-31L583-198 . . . . . . .CYL-31L583-200 . . . . . . .CYL-33L583-211 . . . . . . .L-37L583-212 . . . . . . .L-37L583-213 . . . . . . .L-37L583-214 . . . . . . .L-37L583-215 . . . . . . .L-37L583-216 . . . . . . .L-37L583-217 . . . . . . .L-37L583-218 . . . . . . .L-37L583-219 . . . . . . .L-37L583-233 . . . . . . .L-36L583-233-458 . . . .Keys-10L583-245 . . . . . . .L-36L583-254 . . . . . . .CYL-31, CYL-38L583-255 . . . . . . .CYL-33, CYL-35,CYL-38L583-286 . . . . . . .L-40L583-290 . . . . . . .L-40L583-291 . . . . . . .L-40L583-321 . . . . . . .L-40L583-322 . . . . . . .L-40L583-426 . . . . . . .L-40L583-427 . . . . . . .L-40L583-446 . . . . . . .CYL-31L583-447 . . . . . . .CYL-31L583-454 . . . . . . .L-40, ND-15L583-468 . . . . . . .L-40L583-474 . . . . . . .CYL-3, CYL-31,CYL-38L583-475 . . . . . . .CYL-3, CYL-31,CYL-38L583-476 . . . . . . .CYL-31, CYL-38,CYL-47, CYL-48L583-477 . . . . . . .CYL-31, CYL-38,CYL-47L583-481 . . . . . . .L-40L583-485 . . . . . . .L-40L583-490 . . . . . . .L-40L583-492 . . . . . . .L-40L583-494 . . . . . . .L-40L583-496 . . . . . . .L-40L583-497 . . . . . . .L-37L583-498 . . . . . . .L-37L583-499 . . . . . . .L-37L583-500 . . . . . . .L-37L583-501 . . . . . . .L-37L583-502 . . . . . . .L-37L583-503 . . . . . . .L-37L583-504 . . . . . . .L-37L9010 . . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9010B . . . . . . . . .L-28L9040 . . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9040B . . . . . . . . .L-28Price Book 72AEffective July 18, 2011 • Rev. 7/11L9044 . . . . . . . . . .L-9, L-11, L-13,L-17L9050LB . . . . . . . .L-28L9050P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9056P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9060P . . . . . . . . .L-9, L-11, L-13L9070LB . . . . . . . .L-28L9070P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9071P . . . . . . . . .L-9, L-11, L-13,L-17L9076P . . . . . . . . .L-9, L-11, L-13,L-15L9077P . . . . . . . . .L-9, L-11, L-13L9080LB . . . . . . . .L-28L9080P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9080PEL . . . . . . .L-9, L-11, L-13,L-15, L-17L9080PEU . . . . . .L-9, L-11, L-13,L-15, L-17L9082P . . . . . . . . .L-9, L-11, L-13L9082PEL . . . . . . .L-9, L-11, L-13,L-17L9082PEU . . . . . .L-9, L-11, L-13,L-17L9175 . . . . . . . . . .L-9, L-11, L-13,L-15L9176 . . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9440 . . . . . . . . . .L-9, L-11, L-13,L-15L9444 . . . . . . . . . .L-9L9453LB . . . . . . . .L-28L9453P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9456LB . . . . . . . .L-28L9456P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9457P . . . . . . . . .L-9, L-11, L-13L9458P . . . . . . . . .L-9, L-11, L-13L9460P . . . . . . . . .L-19L9462P . . . . . . . . .L-19L9463P . . . . . . . . .L-19L9464P . . . . . . . . .L-19L9465LB . . . . . . . .L-28L9465P . . . . . . . . .L-9, L-11, L-13,L-15L9466P . . . . . . . . .L-9, L-11, L-13L9473LB . . . . . . . .L-28L9473P . . . . . . . . .L-9, L-11, L-13,L-15L9480P . . . . . . . . .L-9, L-11, L-13,L-15L9485P . . . . . . . . .L-9, L-11, L-13,L-15, L-17L9486P . . . . . . . . .L-9, L-11L9496P . . . . . . . . .L-9, L-11, L-15,L-17

Part Number Page Number Part Number Page Number Part Number Page NumberIndexMM204-152 . . . . . . .Keys-15M204-168 . . . . . . .Tool-3M204-198 . . . . . . .Tool-7M204-200 . . . . . . .Tool-3M204-201 . . . . . . .Tool-3M504-271 . . . . . . .Keys-10, Tool-7M504-306 . . . . . . .Tool-7M504-347 . . . . . . .Tool-7M504-413 . . . . . . .Tool-7M504-424 . . . . . . .Tool-7M504-425 . . . . . . .Tool-7M504-426 . . . . . . .Tool-7M504-427 . . . . . . .Tool-7M504-428 . . . . . . .Tool-7M504-435 . . . . . . .Tool-5M504-439 . . . . . . .Tool-5M504-497 . . . . . . .Tool-9M540-000 . . . . . . .Tool-3, Tool-4M540-051 . . . . . . .Tool-3M540-056 . . . . . . .Tool-3MS-J175 . . . . . . . .Keys-18NN123-007 . . . . . . .ND-15N123-008 . . . . . . .ND-15N123-009 . . . . . . .ND-15N123-010 . . . . . . .ND-15N123-011 . . . . . . .ND-15N123-012 . . . . . . .ND-15N123-013 . . . . . . .ND-15N123-017 . . . . . . .ND-14N123-020 . . . . . . .ND-16N123-021 . . . . . . .ND-15N123-022 . . . . . . .ND-15N123-024 . . . . . . .ND-15N123-025 . . . . . . .ND-15N123-028 . . . . . . .ND-14N123-032 . . . . . . .ND-15N123-034 . . . . . . .ND-14N123-035 . . . . . . .ND-14N123-040 . . . . . . .ND-16N123-043 . . . . . . .ND-15N123-045 . . . . . . .ND-15N123-054 . . . . . . .ND-15N123-055 . . . . . . .ND-15N123-056 . . . . . . .ND-15N123-057 . . . . . . .ND-15N123-059 . . . . . . .ND-15N123-062 . . . . . . .ND-11N123-064 . . . . . . .ND-14N123-065 . . . . . . .ND-14N123-066 . . . . . . .ND-14N123-067 . . . . . . .ND-14N123-068 . . . . . . .ND-14N123-069 . . . . . . .ND-14N123-097 . . . . . . .ND-15N523-000 . . . . . . .ND-14N523-001 . . . . . . .ND-14N523-002 . . . . . . .ND-12N523-013 . . . . . . .ND-15N523-014 . . . . . . .ND-15N523-015 . . . . . . .ND-15N523-016 . . . . . . .ND-15N523-017 . . . . . . .ND-15N523-018 . . . . . . .ND-15N523-019 . . . . . . .ND-15N523-020 . . . . . . .ND-15N523-021 . . . . . . .ND-16N523-022 . . . . . . .CYL-11, CYL-14N523-023 . . . . . . .CYL-14N523-025 . . . . . . .ND-15N523-026 . . . . . . .ND-15N523-027 . . . . . . .ND-15N523-028 . . . . . . .ND-15N523-029 . . . . . . .ND-15N523-031 . . . . . . .ND-15N523-033 . . . . . . .ND-15N523-041 . . . . . . .ND-15N523-054 . . . . . . .ND-15N523-055 . . . . . . .ND-15N523-056 . . . . . . .ND-15N523-057 . . . . . . .ND-15N523-063 . . . . . . .ND-15N523-064 . . . . . . .ND-15N523-065 . . . . . . .ND-15N523-066 . . . . . . .ND-15N523-067 . . . . . . .ND-15N523-069 . . . . . . .ND-15N523-091 . . . . . . .ND-12, CYL-43N523-092 . . . . . . .ND-16N523-105 . . . . . . .ND-15N523-108 . . . . . . .Tool-7N523-123 . . . . . . .CYL-11N523-123 . . . . . . .CYL-14N523-124 . . . . . . .ND-14N523-127 . . . . . . .ND-12N523-146 . . . . . . .ND-14N523-147 . . . . . . .ND-14N523-148 . . . . . . .ND-14N523-149 . . . . . . .ND-15N583-133 . . . . . . .ND-16PP513-023 . . . . . . .Tool-8P513-024 . . . . . . .Tool-8PL1001J . . . . . . . .PS-3PL1002J . . . . . . . .PS-3PL1003J . . . . . . . .PS-3PL2001J . . . . . . . .PS-3PL2002J . . . . . . . .PS-3PL2003J . . . . . . . .PS-3PL3001J . . . . . . . .PS-3PL3002J . . . . . . . .PS-3PL4001J . . . . . . . .PS-3PL4002J . . . . . . . .PS-3PL4003J . . . . . . . .PS-3QQ330-165 . . . . . . .CYL-39Q330-252 . . . . . . .CYL-39Price Book 72AEffective July 18, 2011 • Rev. 7/11RR525-256 . . . . . . .B500-11SS306-105 . . . . . . .S200-12S306-106 . . . . . . .S200-12S306-135 . . . . . . .CYL-19S306-151 . . . . . . .S200-12S306-180 . . . . . . .S-10S306-182 . . . . . . .S-10S306-183 . . . . . . .S-10S605-064 . . . . . . .S200-12S605-192 . . . . . . .CYL-15S605-228 . . . . . . .CYL-14, CYL-15S605-231 . . . . . . .CYL-12, CYL-14S605-241 . . . . . . .AL-8, S-7, S200-8S605-242 . . . . . . .S-7, S200-8S605-289 . . . . . . .S200-12S605-297 . . . . . . .S200-12SM01-210 . . . . . . .Keys-23SM01-287 . . . . . . .Keys-23TTR200A . . . . . . . . .CL-7TR201 . . . . . . . . . .CL-7TR202 . . . . . . . . . .CL-7TR203 . . . . . . . . . .CL-7XXA10-594 . . . . . . .CYL-15XA11-297 . . . . . . .A-6, AL-7XB03-330 . . . . . . .B250-6XB03-418 . . . . . . .CYL-49XB03-427 . . . . . . .B250-6XB04-618 . . . . . . .CYL-49XB09-062 . . . . . . .B250-6XB09-195 . . . . . . .CYL-49XB09-795 . . . . . . .CYL-49XB11-475 . . . . . . .CYL-49XB11-638 . . . . . . .CYL-49XB11-720 . . . . . . .L-26, L-42XB11-789 . . . . . . .CYL-49XB11-790 . . . . . . .CYL-49XB11-825 . . . . . . .CYL-46XB11-916 . . . . . . .B600-11XB11-917 . . . . . . .B600-11XB11-918 . . . . . . .B600-11XB11-919 . . . . . . .B600-11XB11-920 . . . . . . .B600-11XB11-921 . . . . . . .B600-11XB11-922 . . . . . . .B600-11XB11-923 . . . . . . .B600-11XB11-958 . . . . . . .CYL-49XB12-046 . . . . . . .CYL-38, CYL-47XC03-069 . . . . . . .DK-13, ND-16XC03-543 . . . . . . .DK-7XC03-928 . . . . . . .DK-7XC07-960 . . . . . . .DK-7XC11-577 . . . . . . .DK-7XK10-992 . . . . . . .L-42XL11-422 . . . . . . .L-26Bold page numbers reflect pages with pricingIndex-13

IndexPart Number Page Number Part Number Page Number Part Number Page NumberXL11-422 . . . . . . .L-42XL11-446 . . . . . . .L-26XL11-463 . . . . . . .L-26XL11-515 . . . . . . .L-42XL11-543 . . . . . . .L-26XL11-557 . . . . . . .L-26XL11-634 . . . . . . .L-42XL11-635 . . . . . . .L-26XL11-636 . . . . . . .L-42XL11-741 . . . . . . .L-26XL11-743 . . . . . . .L-26XL11-743 . . . . . . .L-42XL11-778 . . . . . . .L-42XL11-806 . . . . . . .Merch-3XL11-820 . . . . . . .L-20XL11-820 . . . . . . .L-42XL11-821 . . . . . . .L-20XL11-821 . . . . . . .L-42XL11-848 . . . . . . .L-42XL11-886 . . . . . . .L-26XL11-895 . . . . . . .CYL-31XL11-897 . . . . . . .L-26XL11-907 . . . . . . .L-26XL12-196 . . . . . . .L-42XN12-001 . . . . . . .ND-11XN12-002 . . . . . . .ND-11XN12-003 . . . . . . .ND-11XN12-004 . . . . . . .ND-11XN12-005 . . . . . . .ND-11XN12-006 . . . . . . .ND-11XN12-007 . . . . . . .ND-11XN12-012 . . . . . . .ND-16XN12-035 . . . . . . .ND-10XN12-035 . . . . . . .ND-12XN12-045 . . . . . . .ND-10, ND-12XN12-292 . . . . . . .ND-14XQ02-309 . . . . . . .DK-13, ND-16XQ02-309 . . . . . . .DK-13XQ03-493 . . . . . . .B250-10XQ03-494 . . . . . . .DK-13, ND-16XQ06-878 . . . . . . .Keys-12XQ07-351 . . . . . . .A-12, AL-13, ND-16XQ07-351 . . . . . . .B250-10, DK-13,S-10XQ11-804 . . . . . . .CYL-49XQ11-935 . . . . . . .CYL-31XQ11-947 . . . . . . .CYL-38XQ11-948 . . . . . . .CYL-38XQ11-949 . . . . . . .CYL-38Bold page numbers reflect pages with pricingIndex-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

NotesBold page numbers reflect pages with pricingPrice Book 72AEffective July 18, 2011 • Rev. 7/11Index-15

NotesIndex-16Price Book 72AEffective July 18, 2011 • Rev. 7/11

NotesPrice Book 72AEffective July 18, 2011 • Rev. 7/11Index-17

NotesIndex-18Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionFORMS & EXAMPLESTable of ContentsWhere to Send Orders . . . . . . . . . . . . . Forms-1How to Determine Hand of Door . . . . . . Forms-1How to Determine Hand of Parts(Handed Levers) . . . . . . . . . . . . . . . . . . Forms-1How To OrderForms-2Ordering ExamplesForms-3Sample Letter of Authorizationfor Everest ® Restricted Products Forms-4Order FormsForms-6Using Order Forms . . . . . . . . . . . . . . . . Forms-6Sequential List of Order Forms . . . . . . . Forms-6Where to Send OrdersType of Order Fax No. Mailing AddressSchlage Commercial 800-452-0665 Schlage CommercialProducts3899 Hancock ExpresswayColorado Springs, CO 80911E-mail: Order_Entry_Schlage_Commercial@irco.comFast Track 800-288-4242 866-I Call IR (866-422-5547)Primus ® / Primus XP 800-452-0665* Primus Ordering ProcessingSchlage Commercial3899 Hancock ExpresswayColorado Springs, CO 80911Schlage Residential 800-366-566 Schlage ResidentialProducts2119 E. Kansas City RoadOlathe, KS 66061* Primus facesheets and signature cards must be mailed to Primus Order Processing.Note: 1)Failure to use the above fax numbers or mailing addresses will delayprocessing of your order.Price Book 72AEffective July 18, 2011 • Rev. 7/11Forms-1

FORMS & EXAMPLES • How To OrderTo order Schlage products, descriptive data should be in the same sequence as shown:LINE OUTSIDE INSIDE DRITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM ADDITIONAL DETAILS1 2 3 4 5 6 7 8 9 10 11 12 13 141. LINE ITEM: Line item number2. QTY: Quantity3. PRODUCT: Complete lock product or part number4. OUTSIDE DES: Outside design code5. OUTSIDE FIN: Outside finish code6. INSIDE DES: Inside design code. Leave blank if same as outside design code.7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code.8. HAND: Hand of door. Only one hand allowed per line item.Example: RH=Right Hand, LH=Left Hand, RR=Right Reverse, LR=Left Reverse.How to Determine Hand of DoorHow to Determine Hand of Parts (Handed Levers)9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL=Less Latch.10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. LLL=Less Strike.11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4", 212=2 1/2".12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified:EE = Extended EquallyEI = Extended InsideEO = Extended OutsideED = Extended DifferentlyEI or EO assumes the latch will be centered on a 1 3/4" door, to which material has been added.13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.012 = 1/8" 118 = 1 1/8"018 = 3/16" 114 = 1 1/4"025 = 1/4" 138 = 1 3/8"031 = 5/16" 112 = 1 1/2"037 = 3/8" 158 = 1 5/8"050 = 1/2" 134 = 1 3/4"078 = 7/8" 200 = 2"100 = 1" 400 = 4"14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements.Forms-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Ordering Examples • FORMS & EXAMPLESLINE OUTSIDE INSIDE DRITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM ADDITIONAL DETAILSOne A or F-Series passage lock with a Georgian knob & rose in 609 on the outside and a Plymouth knob & rose in 605 onthe inside, drive-in latch and strike.1 1 A10S GEO 609 PLY 605 11-110 10-058One D-Series classroom lock with Orbit interchangeable core knob for a 2 1/4˝ thick door, extended equally, E keyway.Also furnish one control key blank.2 1 D70RD ORB 626 RH 214 EE 138 E-1111113 1 35-056 E sectionTwo AL-Series entrance locks with Saturn levers in US 10B with knurling on the outside, tamper resistant screws andkeyed alike.4 2 AL53PD 8SA 613 SAT KA, Torx screwsOne S-Series storeroom lock with Saturn levers in 612, four keys per lock.5 1 S80PD SAT 612 4 keys total6 2 50-215 Charge for extra cut keysOne L-Series passage lock with 05L 630 trim, with lead lined chassis.7 1 L9010 05L 630 RH Lead lined per XL11-515One B600-Series single cylinder deadbolt in US 26D outside, US 3 inside, less the strike, with construction core. No controlor change keys.8 1 B660T 626 LLL ICX9 1 50-231 Handling ChargeOne ND-Series lever lock in RHO 612, classroom function on the outside, storeroom on the inside. Construction and masterkeyed to new system. Furnish one master key and one construction master key.*10 1 ND70x80PD RHO 612 Per XN12-00611 1 49-101 Master Key12 1 48-104 Construction Master key13 2 50-210 Master keying charge (1/cyl)14 2 50-211 Constr. keying charge (1/cyl)One A-Series lock with an Orbit knob in US 3, entrance function, and Primus level 1 cylinder, CP keyway, 0-bitted, no keys.15 1 A53LD ORB 60516 1 20-724 606 122 Primus #000367,CP-000000, LKBOne mortise cylinder, 1 1/4˝ long, which will operate a Von Duprin exit device17 1 20-001 626 114One hotel function L-Series lock with 17B trim in 625, large bow change keys and one large bow emergency key,F section, 0-bitted. Left hand door.18 1 L9485P 17B 625 LH F-000000, 35-141 Keys19 2 50-228 Charge for large bowkeys substituted forstandard bow keys20 1 35-101 F section* Use Master Keyed order form and Key System Summary when ordering.Price Book 72AEffective July 18, 2011 • Rev. 7/11Forms-3

FORMS & EXAMPLES •Sample Letter of AuthorizationFor All Restricted Key ProductsDISTRICT 10End UserLetterhead -REQUIREDDistrict 10 Schools555 Main StreetEnd User City, State 55555(555) 555-5555May 1, 2003Date - REQUIREDTo:Schlage Dealer100 East AvenueDealer City, State 11111RE: District 10, Jones Elementary SchoolDealer Name -RECOMMENDEDFacility Name - REQUIREDPlease consider this authorization to ship product for the above-referenced project.Include RegistryNumber &Facility Code(stamped on keys)for existing keysystemsJones Elementary School is to be keyed using a new Everest D Restricted Key System. For securityreasons, we would like to have all keys for this facility shipped to a location other than the job site. Masterkeyed products, however, can be shipped directly to the site. This letter authorizes Schlage to ship ourrestricted products to the following addresses:Master Keyed Products, Construction Keys, Locks LessCylinders, and Locks with Construction CoresAttn: Building Project ManagerDistrict 10 Schools555 Main StreetEnd User City, State 55555Master Keys, Change Keys, Control Keys, and Key BlanksAttn: LocksmithDistrict 10 Lockshop1201 Fifth AvenueEnd User City, State 55555Authorized Ship-To Addresses -REQUIREDThese two addresses above serve as our only authorized shipment addresses for all orders placed for ourfacility. We understand that this letter will be kept on file and referenced for our future orders and that anew letter is only required to add, remove, or change authorized shipping locations.Sincerely,End User RepresentativeFacilities ManagerEnd UserRepresentativeSignature -REQUIREDLetter may be mailed or faxed to SchlageSchlage Restricted Order Processing3899 Hancock ExpresswayColorado Springs, CO 80911Forms-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Primus Checklist • FORMS & EXAMPLESPRIMUS AND EVEREST PRIMUS ORDERING CHECKLISTTO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDSIMPORTANT NOTESTo expedite processing of all Primus orders, it is highly recommended that Primusproducts be ordered separatelyFor Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS UnlessOtherwise SpecifiedFor All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS UnlessOtherwise SpecifiedFOR LEVEL ONEPRIMUSFOR LEVEL SEVENEVEREST PRIMUS✓ The Distributorʼs Primus number MUST beprovided✓ The Sequence number MUST be providedFOR LEVEL ONE PLUS✓✓✓The Distributorʼs Primus number MUST beprovidedThe Locksmithʼs Facility code MUST beprovidedThe Keyway MUST be provided✓✓✓The Distributorʼs Primus number MUST beprovidedThe Sequence number MUST be providedThe Locksmith number MUST be providedFOR LEVEL TWOFOR LEVEL EIGHT✓✓The Dealerʼs Primus number MUST beprovidedThe Sequence number and/or Section MUSTbe Provided✓✓The Distributorʼs Primus number MUST beprovidedThe Keyway MUST be providedFOR LEVELS THREE & FOURFOR LEVEL NINE✓✓✓✓Orders Originating a System MUST includeboth an Original Facesheet and a SignatureCardAn Original Facesheet MUST accompany allsucceeding ordersThe Primus number MUST be indicated onthe FacesheetALL fields on the Facesheet MUST becompleted where applicable✓✓✓✓Orders Originating a System MUST includeboth an Original Facesheet and a SignatureCardAn Original Primus Facesheet MUSTaccompany all succeeding ordersThe Primus number MUST be indicated onthe FacesheetALL fields on the Facesheet MUST becompleted where applicableAll Primus Orders & Supporting Documentation Should be Sent To:SchlageAttn: Primus Order Processing3899 Hancock ExpresswayColorado Springs, CO 80911Price Book 72AEffective July 18, 2011 • Rev. 7/11Forms-5

FORMS & EXAMPLES • Order FormsUsing Order FormsWe recommend using the order forms included with this price bookwhen placing purchase orders for Schlage products. The following14 pages of order forms are available for copying prior to placing yourorder. Bulk supplies of blank forms are also available upon request.Contact Customer Service to order bulk supplies of forms. Specifyform number.Sequential List of Order FormsDescriptionFormNumberRevDateTotalPagesAvailable onwww.schlage.comNon-Master Keyed Order Form, First Page MS-I250 2/01 1 page •Non-Master Keyed Order Form, Additional Page MS-I300 2/01 1 page •Master Keyed Order Form, First Page MS-I100 3/01 1 page •Master Keyed Order Form, Additional Page MS-I150 2/01 1 page •Key System Summary MS-I200 5/03 4 pages •Primus ® Facesheet MS-E120 7/02 1 page •Primus ® Signature Card MS-E130 8/05 1 page •Schlage Custom Product Request Form MS-S100 5/03 1 pageCommercial Portable Security Custom Logo Request Form CLR 8/05 1 page •Forms-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

QUOTE # PRICE BOOK #SHIPPING INSTRUCTIONSNon-Master KeyedORDERREQUESTED SHIPDATE MARK CARTONS: ACCOUNT NO. P.O. NO. DATEORDER WRITTEN BYCUSTOMER NAME AND ADDRESS: SHIP TO:FOR FURTHER INFORMATION, CONTACT:Name:Phone:Fax:LINEOUTSIDE INSIDEITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKEDRTHK EXT DIMADDITIONAL DETAILSUse for Key Section and Bitting Information,KA Groups, Primus® No., Locksmith ID No., etc.Page 1 of1 Ingersoll-Rand250 21

LINEOUTSIDE INSIDEDRADDITIONAL DETAILSITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM Use for Key Section and Bitting Information,KA Groups, Primus® No., Locksmith ID No., etc.Account No. P.O. No. Page of© 2001 Ingersoll-RandNon-Master Keyed Order Add’l PageMS- I 300 Rev. 2/01

Ingersoll-Rand Company3 11

Notes:➨1Ingersoll-Rand Company231

1 Ingersoll-RandMaster Keyed Order Add'l PageMS-I150 2 1

Account # P.O. #PART 1Job InformationHELPFUL HINTS• Fill in blanks for faster order processing.PART 2System DefinitionHELPFUL HINTS• If you do not know the Facility Code,Primus number, Registry number (R#),or the original factory order number foran existing system, contact CustomerService prior to placing the order:Tel. 1-800-847-1864Fax 1-800-452-0663• New systems for 7-pin Small Format ICEverest B Family require priorapproval by IR Security and SafetyConsultant.• Only compatible system types may beordered on the same purchase order.See Compatability Chart.• Classic refers to Obverse, Numbered(Paracentric), Quad, and Reverse keysection families.• Classic Primus refers to Primus Obverseand Primus Quad key section families.Page __________ of __________KEY SYSTEM SUMMARYJob NameCity State ZipCountrySYSTEM TYPE NEW EXISTINGMASTER KEYINGClassic Master Keyed Original Order # R #Classic Primus ® Master Keyed Original Order # R #Facesheet attached (All level 3 & 4 orders)Signature Card attached (New level 3 & 4 orders) Primus # LevelEverest ® B Family Master Keyed – Small Format IC Original Order # R #Letter of authorized ship-to address attached(New systems & change of address on existing systems) Facility CodeEverest C Family Master Keyed – Open Original Order # R #Everest D Family Master Keyed – Restricted Original Order # R #Letter of authorized ship-to address attached(New systems & change of address on existing systems) Facility CodeEverest Primus Master Keyed Original Order # R #Facesheet attached (All level 9 orders)Signature Card attached (New level 9 orders) Primus # LevelResidential Master Keyed – RMK Original Order # R #CONSTRUCTION KEYINGFull Size Construction Cores IC (A, B or C)(For Full Size IC locks and cylinders)Small Format Construction Cores (B or G) RN(For Small Format IC locks and cylinders)Construction Keyed – CK Original Order # R #(Split Key Method, not available for Primus and IC)Residential Construction Keyed – RCK Original Order # R #(Lost Ball Method, 5 pin C only)COMPATIBILITY CHARTKEY SECTION FAMILYCLASSIC CLASSIC EVEREST EVEREST PRIMUSSYSTEM TYPES 5-PIN 6-PIN PRIMUS B FAMILY C FAMILY D FAMILY C FAMILY D FAMILYMaster KeyingClassicPrimusEverest B FamilyEverest C FamilyEverest D FamilyEverest PrimusResidential, 5-Pin C Keyway OnlyConstruction KeyingFull Size Construction CoresSmall Format Construction CoresSplit KeyResidential, 5-Pin C Keyway Only© 2003 Ingersoll-Rand CompanyMS-I200.01 Rev 5/03

PART 3Common DataHELPFUL HINTS• Unless otherwise specified, 2 changekeys are furnished per lock or cylinder.• Unless otherwise specified key in boldtype is furnished.• RMK and/or RCK systems must beestablished in 5-pin, “C” key section.• Schlage Commercial’s Master KeyDepartment makes the final decision in theselection of key sections.• Schlage Commercial’s default keysection for new Master Key Systems isEverest C145 in the C Family.• Unless otherwise specified, industrystandard key symbols are stampedon Everest and Primus keys.• Bitting is only stamped as standard forClassic key sections and is not availablefor Everest or Primus Keys.PART 4Construction Key QuantitiesHELPFUL HINTS• Construction keys are packed in lockcarton containing packing slip.• Construction keys are not furnishedunless specified.• Split key construction keying is not availablefor Classic Primus or Everest PrimusPage __________ of __________CHANGE KEY QUANTITYFurnish: __________ Classic or Everest ® keys per lock or cylinder key symbol__________ Classic Primus ® or Everest Primus keys per lock or cylinder key symbolKEY TYPEKEY SECTION FAMILYCLASSIC CLASSIC EVERESTEVEREST PRIMUSDESCRIPTION 5-Pin 6-Pin PRIMUS B Family C Family D Family C & D FamilyStandard Bow 48-100 48-101 N/A N/A 48-009 N/A N/AStandard Bow, unembossed 48-130 48-131 48-053 N/A 48-015 48-015 48-012Standard Bow, stamped DND see Note see Note 48-157 48-401 48-002 48-002 48-004Access Bow 48-143 48-144 48-115 N/A N/A N/A N/ALarge Bow 48-140 48-141 48-116 N/A N/A N/A N/ANote: Specify key type and Do Not Duplicate in stamping instructions below.KEY SECTIONSpecial RequestCHANGE KEY PACKAGING AND SHIPPING INSTRUCTIONSPack keys independently (PKI) of lock or cylinder (Furnished standard at no charge with split-key construction keying)?Yes NoIf PKI, ship change keys to: Dealer (default) See Primus facesheet OtherSTAMPING INSTRUCTIONSStamp keys: With industry standard key symbol Do Not Duplicate (DND) With key stamping die XQNon standard codeStamp cylinder: With industry standard key symbol Non standard codeCylinder stamping location: Plug face (Not available for Primus) – VKC Concealed – CKCSYSTEM TYPE DESCRIPTION QUANTITY PART #RCK (Lost Ball) Residential Construction Key 48-100CK (Split Key) Everest C Family and D Family Construction Key 48-008Classic Construction Key 48-104Everest and Classic Extractor Tool 35-057Full Size Construction Cores Construction Key 48-101Control Key 48-056Small Format Construction Cores Construction Key 48-310(Best ® Style)Control Key 48-311© 2003 Ingersoll-Rand CompanyMS-I200.02 Rev 5/03

PART 5Change Key Definition forExisting SystemsPART 6Master Key QuantitiesHELPFUL HINTS• Select the appropriate part number(s)from the Key Selection Table.• Unless otherwise specified, key in boldtype is furnished.Page __________ of __________THE CHANGE KEYS BEING USED ON THIS ORDER ARE:All existing in the system All new exceptAll existing in the system exceptKEY SELECTION TABLEKEY SECTION FAMILYCLASSIC CLASSIC EVEREST ® EVEREST PRIMUSDESCRIPTION 5-Pin 6-Pin PRIMUS ® B Family C Family D Family C & D FamilyMaster KeysStandard Bow 49-100 49-101 N/A N/A 49-009 N/A N/AStandard Bow, unembossed 49-130 49-131 49-053 N/A 49-015 49-015 49-012Standard Bow, stamped DND see Note see Note 49-157* 49-401 49-002 49-002 49-004Access Bow 49-143 49-144 49-115 N/A N/A N/A N/ALarge Bow 49-140 49-141 49-116 N/A N/A N/A N/AControl KeysControl Key (except Hotel) N/A 49-056 49-158** N/A 49-003 49-003 49-005Control Key, unembossed (except Hotel) N/A 49-076 49-052 49-356 N/A N/A 49-020Control Key, Hotel N/A 49-056 N/A N/A 49-016 49-016 N/AEmergency KeysEmergency Key, Standard Bow N/A 49-102 N/A N/A 49-007 49-007 N/AEmergency Key, Large Bow N/A 49-142 N/A N/A N/A N/A N/A* For LP section, specify 49-171. **For LP section, specify 49-172.Note: Specify key type and check box Do Not Duplicate.Classic or Classic Primus orEverest Everest PrimusPart # Part # Level Qty. Per Master Key Symbol(s) = Total Quantity49-______ 49-______ GGMK . . . . . . . . . _____ ________________________________ ___________49-______ 49-______ GMK. . . . . . . . . . . _____ ________________________________ ___________49-______ 49-______ MK or RMK. . . . . . _____ ________________________________ ___________49-______ 49-______ Control . . . . . . . . . _____ ________________________________ ___________49-______ 49-______ Emergency . . . . . . _____ ________________________________ ___________49-______ 49-______ Other _____ ________________________________ __________Ship Master Keys to: Dealer See Primus Facesheet Other© 2003 Ingersoll-Rand CompanyMS-I200.03 Rev 5/03

PART 7Master Key Definition andFuture ExpansionHELPFUL HINTS• Do not use the letters “I”, “O”,“CK”, “KA, “KD” for any masterkey symbols.• Unless otherwise specified,the control key has the samecut as the highest-level keyin the system (Except SFICsystems).• Alter existing master keysymbols, as necessary, toreflect your system.Example:x AA AC thru AG (includes AC,AD, AE, AF & AG).• Attach additional sheets asnecessary.PART 8Operating InstructionsHELPFUL HINTS• Cross keying reduces thesecurity and expansion ofkey systems.• Unless otherwise specified,all hierarchical master keyswill operate cross-keyedcylinders.Page __________ of __________MASTER KEYS USED ON THIS ORDER PLANNED FUTURE EXPANSIONApprox. # of ChangeLevel Existing Master Keys New Master Keys List Future MK Key Symbols UnderSymbols Each New or Future MKExample:MK . . . . . . . . . . BA thru BE BF thru BH BJ, BK 40 eachx x x xGGMK . . . . . . . GGM GGMGMK . . . . . . . . . A thru thruMK . . . . . . . . . . AA thru thruMK . . . . . . . . . . BA thru thruMK . . . . . . . . . . CA thru thruMK . . . . . . . . . . DA thru thruMK . . . . . . . . . . EA thru thruMK . . . . . . . . . . FA thru thruMK . . . . . . . . . . GA thru thruMK . . . . . . . . . . HA thru thruCK . . . . . . . . . . CK CKControl . . . . . . . CONL CONLEmergency . . . EM EMOthers . . . . . . .RMK . . . . . . . . . AA thru thruRCK . . . . . . . . . RCK RCKCross-keyed Cylinder is operated by these change keys Cross-keyed Cylinder is operated by these change keysX ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________© 2003 Ingersoll-Rand CompanyMS-I200.04 Rev 5/03

QUOTE#PRICE BOOK#SHIPPING INSTRUCTIONSREQUESTED SHIP DATEORDER WRITTEN BYFOR MORE INFORMATION, CONTACT:NAME:PHONE:FAX:MARK CARTONS: ACCOUNT NO. P.O. NUMBERCUSTOMER NAME AND ADDRESS:QUICK KEY ORDERSHIP TO:Fax: (800) 452-0665E-mail: Order_Entry_Schlage_Commercial@irco.comMail: Schlage Order Entry3899 Hancock ExpresswayColorado Springs, CO 80911DATECustomer: P.O # InformationLINEITEM QTY PRODUCT DIMENSION KEYWAY FINISH DESCRIPTION Lead Time35-100 Classic Key Blank 5 Pin 10 Days35-101 Classic Key Blank 6 Pin 10 Days35-056 Classic Key Blank Control 10 Days35-002 Everest Conventional Do Not Duplicate 5 Days(Everest D requires Letter of Authorization)35-009 Everest Conventional Standard 5 Days(Everest D requires Letter of Authorization)35-003 Everest Conventional Control 5 Days(Everest D requires Letter of Authorization)35-157 Classic Primus Standard -Levels 3 & 4 Requires Original 5 DaysPrimus Face Sheet. Levels 1, 1+ & 2 requires Primus Number,35-158 Classic Primus Control-Levels 3 & 4 Requires Original Primus 5 DaysFace Sheet. Levels 1, 1+ & 2 requires Primus Number,35-004 Everest Primus Standard-Level 9 Requires Primus Original 5 DaysFace Sheet. Levels 7 & 8 Requires Primus Number35-005 Everest Primus Control-Level 9 Requires Primus Original 5 DaysFace Sheet. Levels 7 & 8 Requires Primus Number35-310 Best Key Section Key Blanks 10 Days35-401 Everest B SFIC Key Blanks Embossed- 5 DaysRequires Letter of Authorization35-021 Everest B SFIC Key Blanks Unembossed- 5 DaysRequires Letter of Authorization48-401 Everest B SFIC Cut Key Embossed- 5 DaysRequires Letter of Authorization48-021 Everest B SFIC Cut Key Unembossed- 5 DaysRequires Letter of Authorization49-401 Everest Cut Key Embossed-Master 5 DaysRequires Letter of Authorization49-021 Everest Cut Key unembossed-Master 5 DaysRequires Letter of Authorization49-356 Everest Cut Key Embossed-Control 5 DaysRequires Letter of Authorization49-022 Everest Cut Key unembossed-Control 5 DaysRequires Letter of Authorization80-036 Everest SFIC Uncombinated Cores 5 DaysRequires Letter of Authorization80-037 Everest SFIC Combinated Cores 5 DaysRequires Letter of AuthorizationSC-5236

IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:

Ingersoll Rand Security TechnologiesSchlageAttn.: Primus Order Processing3899 Hancock ExpresswaySecurity, CO. 80911© 2009 Ingersoll RandMS-E120 Rev. 6/09

PRIMUS®Signature CardPrimus#For Internal Use OnlyOrder#G/Z/ES/MLevel 3, 4, and 9 Order AuthorizationTHIS SIGNATURE CARD ESTABLISHES AUTHORIZATION TO PURCHASE ADDITIONALPRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INSTALLED AT THE ADDRESS BELOW.THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER– FAXED COPIES NOT ACCEPTABLE –PRIMUS SECURITY LEVEL:3U (no exclusivity)3G (2-digit zip exclusivity)4Z (time exclusivity)4N (nationwide exclusivity)9U (no exclusivity)9G (2-digit zip exclusivity)9Z (time exclusivity)9N (nationwide exclusivity)PROJECT INFORMATIONClassic KeywaysEverest ®KeywaysProject Name (please print or type)Street Address (no P.O. Box)City State Zip CodeAUTHORIZED OWNER SIGNATURE(S):If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authority able to controlother signers on this form.1.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number2.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number3.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number4.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number5.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number— OVER —

DEALER OF LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)Dealer or Locksmith Account # Primus #Address (no P.O. Box)Dealer or Locksmith Company NameCity State Zip CodePhone NumberFax NumberContact 2 (Please print or type)Contact 1 (Please print or type)Contact 2 SignatureContact 1 SignatureEffective From:DatetoDateOwners Authorization By (Please print or type)Owners Authorization SignatureDateSPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signatureauthorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibilityfor validating the owner’s signature as identified on the Primus Signature Card before orderingthe material.SPECIAL INSTRUCTIONS:Please indicate any restrictions to authorized individuals listed on this form when purchasingadditional Primus product or duplicating keys.Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letterrequesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributorsand Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax ofthis card will not be accepted.Please mail the original copy to:IR Schlage SchlageAttn: Attn.: Master Master Key Key Control Department2315 3899 Briargate Hancock Parkway, Expressway Suite 700Colorado Springs, CO CO 80920 80911– FAXED COPIES WILL NOT BE ACCEPTED –© 2002 Ingersoll-RandMS-E130 Rev. 8/05

SCHLAGE CUSTOM PRODUCT REQUEST FORMPlease fax this request to your IR Security & Safety Consultant (see other side)Ingersoll Rand Security & Safety Consultant (see other side)Date:Phone:Company Name:Address:Requester:Fax:E-mail:Product Type and Features Required (elaborate below):Item Product Des. Fin. Options Custom Features Required123456Product Application:Building Type: Medical Educational Hospitality OfficeQuantity required on this order:Delivery date required:Will requirements for this Custom Product be ongoing? (please select from the options below)No Yes: Qty. required beyond this order: Year 1 Yr. 2 Yr. 3Does product give Schlage a proprietary specification advantage? No YesCompeting vendor and competing product:Competitor’s pricing:Other products pulled through on order:Acknowledgement of this request will be given within 10 business days© 2003 Ingersoll-Rand CompanyMS-S100 Rev. 5/03

Ingersoll Rand Security Technologies ConsultantsUnited States CommercialSSC Northern CaliforniaPleasanton, CA 94566sscnortherncalifornia@irco.com925-462-4777SSC Southern CaliforniaArcadia, CA 91006sscsoutherncalifornia@irco.com626-359-5555SSC CarolinaDavidson, NC 28036ssccarolina@irco.com704-549-1999SSC CentralOlathe, KS 66062ssccentral@irco.com913-327-8600SSC ChicagoAddison, IL 60101sscchicago@irco.com877-282-1721SSC Mountain StatesCentennial, CO 80111ssccolorado@irco.com720-279-5600SSC FloridaLongwood, FL 32750sscflorida@irco.com407-571-2000SSC MidwestIndianapolis, IN 46250sscindiana@irco.com317-715-4500SSC MichiganFerndale, MI 48220sscmichigan@irco.com248-548-8900SSC Mid-AtlanticWilmington, DE 19809sscmidatlantic@irco.com800-996-2961SSC New EnglandNeedham Heights, MA 02494sscnewengland@irco.com781-449-2860SSC Metro New YorkHawthorne, NY 10532sscmetronewyork@irco.com914-742-2760SSC Great LakesPittsford, NY 14534sscupstatenewyork@irco.com585-248-1520SSC North CentralEdina, MN 55439sscnorthcentral@irco.com952-674-4940SSC NorthwestBothell, WA 98011sscnorthwest@irco.com425-686-3615SSC SouthNorcross, GA 30071sscsouth@irco.com678-906-2103SSC SouthwestTempe, AZ 85281sscarizona@irco.com866-494-7772SSC TexasPlano, TX 75024ssctexas@irco.com972-378-1191Canada and Latin AmericaBritish ColumbiaRichmond, BC V7A 4V4sscbritishcolumbia@irco.com604-272-5222AlbertaCalgary, AB T2E 7T1ssccalgary@irco.com403-287-1190AlbertaEdmonton, AB T5V 1J7sscedmonton@irco.com780-451-1641Saskatchewan/ManitobaWinnipeg, MB R3E 2V2sscwinnipeg@irco.com204-786-6355OntarioMississauga, ON L5E 1E4sscontario@irco.com905-403-1800877-590-4734QuebecMontreal, PQ H2B 1Z5sscquebec@irco.com514-385-0005© 2003 Ingersoll-Rand Company© 2005 Ingersoll Rand CompanyMS-S100 Rev. 11/05 Rev. 5/03

IntroductionTable of ContentsFunctions A-2Complete Locks A-3Options A-4Latches . . . . . . . . . . . . . . . . . . . . . . . . . . A-4Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . A-4Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . A-5Primus ® / Primus XP . . . . . . . . . . . . . . . . A-5Non-Standard Door Thickness . . . . . . . A-6Locks Less Components . . . . . . . . . . . . A-6Tamper Resistant Torx ® Screws . . . . . . . A-6Special Options . . . . . . . . . . . . . . . . . . . A-6Parts A-7Knobs and Levers, Standard . . . . . . . . A-7Knobs and Related Parts,Interchangeable Core . . . . . . . . . . . . . . . A-7Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7Latches . . . . . . . . . . . . . . . . . . . . . . . . . . A-8Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . A-8Accessories and Adapters . . . . . . . . . . . A-9Backset Links and Reinforcements . . . . A-9Miscellaneous Parts . . . . . . . . . . . . . . . A-10Plunger Units . . . . . . . . . . . . . . . . . . . . A-11Dimension Chart: Plunger Units . . . . . . A-11Screws . . . . . . . . . . . . . . . . . . . . . . . . . A-12Screw Packs, Standard . . . . . . . . . . . . A-12Screw Packs, Torx ® . . . . . . . . . . . . . . . A-12Special Parts . . . . . . . . . . . . . . . . . . . . A-12Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationA 53 P DFinish Codesand DescriptionsLatch SuffixD = DeadlatchS = SpringlatchACylinder SuffixP = 6-Pin CylinderL = Less 6-Pin CylinderR = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreFunctionLock SeriesCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel643e (US 11) Aged BronzeStandard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Latch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throwStrike 1 1/8" x 2 3/4", Square corner, T-strike, boxBackset 2 3/8"Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/8" – 1 7/8"Keys Two nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11A-1

A • FunctionsANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Non-Keyed LocksKeyed LocksSCHLAGEANSISCHLAGEANSIA10SA25DF75Passage LatchBoth knobs always unlocked.Exit LockBlank plate outside. Inside knobalways unlocked.A53PDF109Entrance LockTurn/push-button locking; pushingand turning button locks outsideknob, requiring use of key untilbutton is manually unlocked. Pushbuttonlocking; pushing button locksoutside knob until unlocked by keyor by turning inside knob.A30D F77 Patio LockPush-button locking. Turning insideknob or closing door releases button,preventing lock-out.A40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlockedfrom outside with small screwdriver.Turning inside knob or closing doorreleases button.A43D F79 Communicating LockTurn-button in outer knob locks andunlocks knob and inside thumbturn.A70PD F84 Classroom LockOutside knob locked andunlocked by key. Inside knobalways unlocked.A79PDCommunicating LockWith Blank PlateLocked or unlocked by key fromoutside. Blank plate inside.A80PD F86 Storeroom LockOutside knob fixed. Entrance by keyonly. Inside knob always unlocked.A170Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.A85PD * F93 Faculty Restroom Lock(with Indicator Cylinder)Outside knob fixed. Entrance by keyonly. Push-button in inside knobactivates visual occupancy indicator,allowing only emergency master keyto operate. Turning inside knob orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provideslock-out feature by keeping indicatoractivated.* 85 function locks are not available in Full Size& Small Format Interchangeable Cores.A-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

A-SeriesComplete Locks • AGeorgian (GEO)Levon (LEV) * Orbit (ORB) Plymouth (PLY)Tulip (TUL)* LEV lever is available asinside trim only ondeadlatching functions.A-SeriesKnob or Lever StylesORB TUL LEVPLY GEO Levon is not available with acylinder and with deadlatch-ing functions is only availableas inside trim.Only Plymouth isavailable in 629 or 630Finishes626 605 612 613 626 605 613 626 605 613625 643e 643e 612PLY only630⧖ Additional LeadtimeFunction Description606 609 PLY only625 629GEO only 606 609626 625KeylessA10S PassageA25D** Exit $101 $113 $131 $136 $148 $166 $166 $178 $196** Specify door thicknessA40S Privacy 108 120 138 146 158 176 194 206 224A30D Patio 146 158 176 188 200 218 226 238 256A43D CommunicatingA170 Single dummy 55 61 71 63 69 79 77 83 93Keyed, Single CylinderA53PD EntranceA70PD Classroom $193 $205 $223 $240 $252 $270 $269 $281 $299A80PD StoreroomA79PD Communicating 219 231 249 266 278 296 - - -A85PD*** Faculty Restroom 227 239 257 279 291 309 336 348 366*** Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified.Emergency keys must be ordered separatelyNotes:1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) Split finish not available on A25D, A43D, A79PD.Price Book 72AEffective July 18, 2011 • Rev. 7/11A-3

A • OptionsLatches, Strikes11-068Standard11-085Standard11-104 41-005LatchesSpecifyAdd toHsgLockBackset Description Dia Springlatch Deadlatch PriceSquare corner, 1" x 2 1/4", standard7/8"11-068 11-0852 3/8" 1/4" Radius round corner, 1" x 2 1/4" 11-069 11-088Circular, drive-in, 605 and 626 finish only 1" 11-110 11-104Square corner, 1" x 2 1/4"7/8"11-111 11-091 N/C2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 11-112 11-092Square corner, 1 1/8" x 2 1/4", standard for 2 3/4" backset 11-116 11-096Circular, drive-in, 605 and 626 finish only 1" 11-113 11-1053 3/4" Square corner, 1 1/8" x 2 1/4" 11-118 11-103 $9.705" Backset extension link 7/8" 41-005* 15.70* Backset extension link 41-005 must be used with 2 3/8" backset latches.Link 41-005 requires reinforcement when used in metal doors. See A Parts: Backset Links and Reinforcements.Link 41-005 installed in 1" latch holes require one G506-815 sleeve. See A Parts: Accessories and Adapters.** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-001Standard10-004 10-025 10-026 10-058StrikesAdd to LockDescription Lip Length Specify PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" 10-001 N/CSquare corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 1 1/2", 10-0011 3/4", 2"$5.801/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 10-004 N/CANSI, no box, 1 1/4" x 4 7/8"1 3/16"10-025N/C1 3/8", 1 1/2” 11.10Box for ANSI strike, must be specified — K510-066Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-0261/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-027N/CCircular, adjustable, 1 3/4" diameter, 605 and 626 finish only 1 7/32" 10-058Notes: 1) Electric strike (10-042) is available as a part. See A Parts: Strikes.2) Strikes with long lip lengths are sold as parts. See A Parts: Special Parts.Shaded items are standard components and arefurnished with locks unless otherwise specified.A-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeable Core, Full Size Construction Core,Locks Less ComponentsOptions • AOrbit (ORB)Full Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceExample: A53RD ORB $29.00Full size construction core** T suffix Add to Lock PriceExample: A53TD ORB 29.00Less full size core J suffix Deduct fromExample: A53JD ORBLock Price26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Notes:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Full size interchangeable core is not available for Faculty Restroom function (A85).3) Full size interchangeable core is available with ORB design only.Primus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionA-Series lock and Primus cylinderA-Series lock and Primus full size interchangeable corecylinderNote:4) Primus is not available for Faculty Restroom function (A85).SpecifyLock less cylinder (use L suffix). Order Primus cylinderseparately. See Cylinders.Example: 1 ea. A53LD1 ea. 20-724Lock less full size core (use J suffix). Order Primus coreseparately. See Cylinders: Interchangeable Core.Example: 1 ea. A70JD1 ea. 20-740Price Book 72AEffective July 18, 2011 • Rev. 7/11A-5

A • OptionsNon-Standard Door Thickness, Primus ® , Torx ® Screws,Special OptionsNon-Standard Door ThicknessDescription Specify Add to Lock PriceExtended Inside (EI), 2" thru 2 1/2" Door thickness and how door is extended.$49.30Example: 2 1/2", EINote:1) Locks with non-standard door thickness are available extended inside (EI) only.Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess each knob LLL for knob design $7.30Example: A53PD LLL/PLY x PLYLess each rose or turn LLL for rose design 5.80Example: A53PD PLY x PLY/LLLLess standard cylinder L suffix 50.00Example: A53LDLess indicator cylinder L suffix 74.00Faculty Restroom function (A85) Example: A85LDLess springlatch LLL for latch 9.40Example: A40S PLY 605 LLL 10-004Less deadlatch LLL for latch 15.70Example: A53PD PLY 626 LLL 10-025Less strike LLL for strike 3.50Example: A53PD PLY 612 11-096 LLLLock chassis only* Less all possible components Sum of applicableExample: A53LD LLL 626 LLL LLLdeducts, use PLYdesign for base price.* Chassis for non-ORB design is furnished unless ORB design is specified.Tamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceLatch and strike screws Torx screws $14.50Special Options⧖ Extended Factory Lead TimeNot subject to standard discount termsSpecifyDescription Lock Function "X" Number Add to Lock PriceA53PD with restoring slide A53PD XA11-297 $37.80Note:2) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.A-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Lock Trim: Knobs, Levers, Knobs and Related Parts,Interchangeable Core, RosesParts • AKnobs and Levers, StandardDesigns and FinishesGEO LEV ORB PLY TUL605606609Part 612 613Number Description 626 625 63001-008 Closed knob or lever $24.70 $27.70 $32.7001-009 Open knob or lever 24.70 27.70 32.7001-018 Cylinder knob and sleeve 35.50 38.50 43.5001-081 Sleeve for cylinder knob 7.00 7.00 7.00Note: 1) Use TUL design sleeve for GEO and PLY (except PLY 630).Knobs and Related Parts, Interchangeable CoreDesigns and FinishesORB605606Part 612Number Description 626 625 61301-026 Full size core knob $48.70 $51.50 $56.7001-054* Full size core knob, core, driver, and retainer (converts PD to RD) 110.00 113.00 118.0001-053** Full size core driver and retainer 9.00A501-941** Full size core retainer 2.90C604-307** Full size core driver, universal 6.50* Furnished 1-bitted with two 6-pin keys unless otherwise specified.** Design and finish not required.Note:2) Locks manufactured prior to March 1992 require installation of “universal driver” to accommodate Primus ® cores.RosesGEODesigns and FinishesPLY(use for LEV)TUL(use for ORB)605609Part 612 613Number Description 626 625* 63001-001 Outside Rose01-002 Inside Rose$17.90 $20.90 $25.90* Not available for 01-001 ORBPrice Book 72AEffective July 18, 2011 • Rev. 7/11A-7

A • PartsLatches, Strikes11-068 11-085 11-088 11-104LatchesPart Number Specify Hsg PriceSpringlatch Deadlatch Finish Backset Description Dia Each11-068 11-085 • Square corner, 1" x 2 1/4", standard11-069 11-088 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4"7/8"11-110 11-104 • 1" Circular drive-in, 605 and 626 only 1"11-111 11-091 • Square corner, 1" x 2 1/4"7/8"$39.7011-112 11-092 • 2 3/4" 1/4" Radius round corner, 1" x 2 1/4"11-116 11-096 • Square corner, 1 1/8" x 2 1/4"11-113 11-105 • 1" Circular drive-in, 605 and 626 only1"11-118 11-103 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 1" 42.7039-030* • — Rabbeted latch and strike kit, 605 and 626 only — 36.20* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-001 10-004 10-025 10-042 10-058StrikesSpecifyPricePart Number Finish Description Lip Length Each10-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" $7.2010-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10.201 1/2", 1 3/4", 2"10-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 7.8010-025* • ANSI, no box, 1 1/4" x 4 7/8"1 3/16" 12.001 3/8", 1 1/2” 30.00K510-066 Box for ANSI strike — 4.9010-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.0010-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.0010-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 193.0010-058 • Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 10.10* Specify lip length when ordering.A-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Accessories and Adapters,Backset Links and ReinforcementsParts • A38-018 F506-868 G506-815Accessories and AdaptersPart Specify PriceNumber Finish Description Each38-018 • Thin door extension ring (2 required per lock) $8.70F506-868 Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation Order inmultiples of 1000.50G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 5.1041-005 A501-565 A501-567Backset Links and ReinforcementsPartPriceNumber Description Each37-001* Metal door reinforcer kit, fits both 7/8" and 1" diameter housings $26.0041-005 5" Backset extension link 15.10A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. 13.10Fits both 7/8" and 1" diameter housings.A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. 13.10Fits both 7/8" and 1" diameter housings.A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold 8.10latch in metal doors.G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 5.10* Specify door thickness, includes A501-567 and A501-565 or A501-566.Notes: 1) 5" Backset extension links installed in 1" latch holes require G506-815 sleeve to join latch and link.2) Links installed in metal doors require reinforcement.Price Book 72AEffective July 18, 2011 • Rev. 7/11A-9

A • PartsMiscellaneous PartsMiscellaneous PartsPart Specify PriceNumber Finish Description EachA201-330 • Non-threaded chassis, less knob & rose - A170 $29.60A201-370 Cam & driver - A80 6.60A201-377 Mounting plate, ins. (except A43, A79) 6.70A201-399 • Hub & cap, out. (except A10, A25, A40, A43) 21.30A201-406 • Hub & cap, out. - A10, A40, A43 21.30A201-558 • Rose, out. - A25 36.20A201-684 • Threaded chassis, less knob & rose - A170 29.60A201-688 • Turn unit, ins. - A43 36.20A301-386* Spindle & catch, ins. (except A43, A79) 6.70A301-387 Spindle & catch, out. (except A25, A43) 6.70A301-391* Cam unit - A30 6.70A301-402 Cam unit, out. - A40, A53, A85 6.70A301-403 • Housing & cap, 1 3/8" thru 1 7/8" door (except A43, A79) 7.90A301-404 • Housing & cap, 1 7/8" thru 2 1/4" door, EI (except A43, A79) 7.90A301-405 • Housing & cap, 2 1/4" thru 2 1/2" door, EI (except A43, A79) 7.90A301-406 • Threaded housing & cap, ins. (except A43, A79) 8.00A301-409* Spindle, 1 7/8" thru 2 1/4" door, EI (except A43, A79) 27.40A301-410* Spindle, 2 1/4" thru 2 1/2" door, EI (except A43, A79) 27.40A500-001 Spindle, ins, 2" thru 2 1/4" door, EI - A43 11.20A500-002 Spindle, ins., 2 1/2" door, EI - A43 11.20A501-167 Threaded rod for mounting A170s as double dummy set 11.10A501-305 Hub plate, ins. (except A79) 5.20A501-498 Hub, 1 3/8" door - A25 7.80A501-499 Hub, 1 3/4" door - A25 7.90A501-615 Spindle wedge - A80, A85 4.90A501-633 Spindle, ins. - A43 5.70A501-710 Swivel sleeve - A85 (except ORB design) 5.00A501-721 Cam plug - A70, A79 15.10A501-766 • Rose, ins. - A79 32.60A501-767 Mounting plate - A79 5.00A501-768 Hub plate, ins. - A79 5.00A501-791 Cam & plug spacer - A70, A79 3.10A501-874 Hub plate, out. - A25 7.80A501-901 Plate, out. - A80, A85 3.50A508-399 Plate, out. (except A25, A80, A85) 6.80A508-597** Spring separator (except A10, A25, A40, A43) 5.00A700-017 Spiral cam - A70, A79 7.40* Parts that are not directly interchangeable with locks manufactured before 1984.** Parts that require frame A508-598.A-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous Parts (continued), Plunger UnitsParts • AMiscellaneous Parts (contʼd)Part Specify PriceNumber Finish Description EachA508-598 Frame $7.90A508-600 Housing - A43, A79 11.00A508-605 Slide spring 5.00A508-640 Spacer, ORB knob 5.50A508-641 Slide stop - A43 20.20A590-158* Slide, restoring - A30, A85 5.00A590-159 Slide, non-restoring - A43, A53, A70, A79, A80 5.00A590-180 Slide, restoring - A40 5.00A590-181 Slide, non-restoring - A10, A25 5.00C503-008 Cotter pin Order inmultiples of 1000.44G570-232 Plug, spindle, lever designs only - A10 9.20* Parts that are not directly interchangeable with locks manufactured before 1984.Plunger UnitsPart Specify PriceNumber Finish Description Each01-055 • Plunger unit, ins. - A3001-056 • Plunger unit, ins. - A4001-057 • Plunger unit, out. - A40 $10.6001-058 • Plunger unit, out. - A4301-060 • Plunger unit, ins. - A5301-063 • Plunger unit, ins. - A85 23.40Note:1) Specify dimension for all plunger units. See chart below for dimensions.Dimension Chart: Plunger UnitsPartNumber Design Door Range Dim Number Design Door Range Dim1 3/8" – 1 7/8" 36001-058Non-ORB1 3/8" – 2 5/8", EI281Non-ORB over 1 7/8" – 2 1/4", EI 424 ORB 34901-055 over 2 1/4" – 2 1/2", EI 449 1 3/8" – 1 7/8" 36301-0561 3/8" – 1 7/8" 428 Non-ORB over 1 7/8" – 2 1/4", EI 42701-060ORB over 1 7/8" – 2 1/4", EI 49201-063over 2 1/4" – 2 1/2", EI 452over 2 1/4" – 2 1/2", EI 517 1 3/8" – 1 7/8" 43101-057Non-ORB1 3/8" – 2 1/2", EI070 ORB over 1 7/8" – 2 1/4", EI 497ORB 135 over 2 1/4" – 2 1/2", EI 520Note: 2) Specify part number, finish, and dimension.Example: 01-060 626 Dim = 360, inside plunger unit for A53 PLY 626, 1 3/8" – 1 7/8" door.Price Book 72AEffective July 18, 2011 • Rev. 7/11A-11

A • PartsScrews, Standard Screw Packs,Torx ® Screw Packs, Special PartsScrewsPrice Each(Order inPart Specify multiplesNumber Finish Description Door Thickness Type Size of 100)A501-161 Mounting, All from 1 3/8" – 1 7/8" POH Mach 10-32 x 1 1/8" $0.68(except A43, A79)A501-769 Mounting, A79 from 1 3/8" – 2" POMH 1-way 10-32 x 1 1/8" 0.80A501-770 Mounting, A79 over 2" – 2 3/4", EI POMH 1-way 10-32 x 2" 0.82A501-818 Mounting, All from 2" – 2 1/2", EI POH Mach 10-32 x 2 1/16" 0.74(except A43, A79)A508-649 • Mounting, A43 from 1 3/8" – 1 7/8" Torx screw (T-20) 10-32 x 1 1/8" 1.50A508-650 • Mounting, A43 from 2" – 2 1/2", EI Torx screw (T-20) 10-32 x 2" 1.50C603-256 • ANSI strike — PFH Combo 12-24 x 1" 0.68C603-897 • Latch or standard strike — PFH Combo 8-32 x 3/4" 0.74Mounting, A170Screw Packs, StandardPart SpecifyNumber Finish Description Contents Price EachA201-811 • Mounting, latch and strike (2) A501-161 $5.60(except A43, A170) (4) C603-897A201-812 • Mounting, A170 (3) C603-897 4.20A201-814 • Mounting, A43 (2) A508-649 3.30Screw Packs, Torx ®Part SpecifyNumber Finish Description Contents Price EachC203-311 • Latch and standard strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $13.90(2) L583-371 (T-20)Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).Special Parts⧖ Extended Factory Lead TimeNot subject to standard discount termsPart SpecifyNumber Finish Description Price EachXQ07-351* • 10-025 Strike, 7/8" flat lip $19.7010-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8" and 1-1/2") 95.30* Specify lip length.Note:2) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.A-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctionsAL-2Complete LocksAL-3OptionsAL-4Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-4Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-4Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . AL-5Small Format Interchangeable CoreSmall Format Construction Core . . . . . . . . AL-5Locks Less Components . . . . . . . . . . . . . AL-6Non-Standard Door Thickness . . . . . . . . . AL-6Primus ® / Primus XP . . . . . . . . . . . . . . . . . AL-6Tactile Warning . . . . . . . . . . . . . . . . . . . . . AL-7Tamper Resistant Torx ® Screws . . . . . . . . AL-7Special Options . . . . . . . . . . . . . . . . . . . . . AL-7PartsAL-8Levers, Standard . . . . . . . . . . . . . . . . . . . . AL-8Levers and Related Parts,Interchangeable Core . . . . . . . . . . . . . . . . AL-8Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-8Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-9Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-9Accessories and Adapters . . . . . . . . . . . . AL-10Backset Links and Reinforcements . . . . . AL-10Miscellaneous Parts . . . . . . . . . . . . . . . . AL-11Parts for 2" Doors . . . . . . . . . . . . . . . . . . AL-12Plunger Units . . . . . . . . . . . . . . . . . . . . . . AL-12Hub, Frame and Housing Kits . . . . . . . . . AL-12 .Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-13Screw Packs, Standard . . . . . . . . . . . . . . AL-13Screw Packs, Torx ® . . . . . . . . . . . . . . . . . AL-13Special Parts . . . . . . . . . . . . . . . . . . . . . . AL-13Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationAL 53 P DLatch SuffixD = DeadlatchS = SpringlatchALCylinder SuffixP = 6-Pin CylinderL = Less 6-Pin CylinderR = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreB = Less SFICBDC = Disposable SFICG = Everest Patented SFICH = Construction SFICFunctionLock SeriesSFIC = Small Format (Best ® Style) Interchangeable CoreFinish Codesand DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated626AMAntimicrobial Coatingon Satin Chromium643e (US11) Aged BronzeStandard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throwStrike 1 1/4" x 4 7/8", ANSI, Square corner, no boxBackset 2 3/4"Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/8" – 1 7/8"Keys Two nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-1

AL • FunctionsANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Non-Keyed LocksKeyed LocksSCHLAGEANSISCHLAGEANSIAL10SF75Passage LatchBoth levers always unlocked.AL50PD F82 Entrance/Office LockPush-button locking. Push-buttonlocks outside lever until unlockedwith key or by rotating inside lever.AL25DExit LockBlank plate outside. Inside leveralways unlocked.AL53PD F109 Entrance LockTurn/push-button locking; pushingand turning button locks outside leverrequiring use of key until button ismanually unlocked. Push-buttonlocking; pushing button locks outsidelever until unlocked by key or byturning inside lever.AL40S F76 Bath/Bedroom Privacy LockPush-button locking. Can beunlocked from outside with smallscrewdriver, not included. Turninginside lever or closing door releasesbutton.AL70PD F84 Classroom LockOutside lever locked and unlocked bykey. Inside lever always unlocked.AL44SHospital Privacy LockPush-button locking. Unlockedfrom outside by turning emergencyturn-button. Turning inside lever orclosing door releases button.AL80PD F86 Storeroom LockOutside lever fixed. Entrance by keyonly. Inside lever always unlocked.AL170Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.AL85PD * F93 Faculty Restroom Lock(with Indicator Cylinder)Outside lever fixed. Entrance by keyonly. Push-button in inside leveractivates visual occupancy indicator,allowing only emergency masterkeyto operate. Turning inside lever orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lockoutfeature by keeping indicatoractivated.* 85 function locks are not available in Full Size& Small Format Interchangeable Cores.AL-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

AL-SeriesComplete Locks • ALJupiter (JUP)Neptune (NEP) Omega (OME) Saturn (SAT)AL-SeriesLever StylesJUP NEP SAT OMEFinishes626 605 606 613612 619625 643eAdditionalLeadtimeFunction Description 609KeylessAL10S Passage $175 $187 $205AL25D* Exit* Specify door thickness192 $204 $222AL40S PrivacyAL44S Privacy, hospital199 211 229AL170 Single dummy 100 106 116KeyedAL50PD Entrance/OfficeAL53PD EntranceAL70PD Classroom$255 $267 $285AL80PD StoreroomAL85PD** Faculty Restroom Lock** Faculty Restroom function locks are furnished 0-bitted withtwo 6-pin keys unless otherwise specified. Emergency keys295 307 325must be ordered separatelyNotes:1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) Split finish not available on AL25D.Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-3

AL • OptionsLatches, Strikes11-096Standard11-088 11-104LatchesHsg Specify Add toBackset Description Dia Springlatch Deadlatch Lock PriceSquare corner, 1" x 2 1/4"7/8"11-068 11-0852 3/8" 1/4" Radius round corner, 1" x 2 1/4" 11-069 11-088Circular, drive-in, 605 and 626 finishes only 1" 11-110 11-1042 3/4"Square corner, 1" x 2 1/4"7/8"11-111 11-091 N/C1/4" Radius round corner, 1" x 2 1/4" 11-112 11-092Square corner, 1 1/8" x 2 1/4", standard 11-116 11-096Circular, drive-in, 605 and 626 finishes only 1" 11-113 11-1053 3/4" Square corner, 1 1/8" x 2 1/4" 11-118 11-103 $9.705" Backset exension link 7/8" 41-005* 15.70* Backset extension link 41-005 must be used with 2 3/8" backset latches.Link 41-005 requires reinforcement when used in hollow metal doors. See AL Parts: Backset Links and Reinforcements.Link 41-005 installed in 1" latch holes require one G506-815 sleeve. See AL Parts: Accessories and Adapters.** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-025Standard10-001 10-027 10-058StrikesDescription Lip Length Specify Add to Lock Price1 1/8" N/CSquare corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10-0011 1/2", 1 3/4", 2"$10.201/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 10-004 N/CANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10-025 N/CANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2” 10-025 11.10Box for ANSI strike, must be specified — K510-066Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-0261/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-027N/CCircular, adjustable, 1 3/4" diameter, 605 and 626 finishes only 1 7/32" 10-058Notes:1) Electric strike (10-042) is available as a part. See AL Parts: Strikes.2) Strikes with long lip lengths are sold as parts. See AL Parts: Special Parts.Shaded items are standard components and arefurnished with locks unless otherwise specified.AL-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeable Core,Small Format Interchangeable CoreOptions • ALJupiter (JUP) Neptune (NEP) Saturn (SAT)Full Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceExample: AL53RD SAT $29.00Full size construction core** T suffix Add to Lock PriceExample: AL53TD SAT 29.00Less full size core J suffix Deduct fromExample: AL53JD SATLock Price26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Notes:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Full size interchangeable core is not available for Faculty Restroom function (AL85).3) Full size interchangeable core is not available with Omega.Jupiter (JUP) Neptune (NEP) Saturn (SAT)Small Format Interchangeable CoreSmall Format Construction CoreAdd to Lock PriceDescription Specify (per core)Everest ® patented core* G Suffix $62.00Example: AL53GD SATSmall format construction core** H Suffix 34.00Example: AL53HD SATLess small format core B Suffix N/CExample: AL53BD SATSmall format disposable core BDC Suffix N/CExample: AL53BDC SAT* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.Notes: 4) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying.5) Small format interchangeable core is not available for Faculty Restroom function (AL85).6) Small format interchangeable core is not available with Omega.Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-5

AL • OptionsLocks Less Components,Non-Standard Door Thickness, Primus ®Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess each lever LLL for lever design $8.00Example: AL53PD LLL/RHO x SATLess each rose LLL for rose design 10.00Example: AL53PD SAT x SAT/LLLLess standard cylinder L suffix 50.00Example: AL53LDLess cylinder, Faculty Restroom L suffix 74.00function (AL85)Example: AL85LDLess springlatch LLL for latch 10.00Example: AL40S SAT 605 LLL 10-004Less deadlatch LLL for latch 16.30Example: AL53PD SAT 626 LLL 10-025Less strike LLL for strike 3.90Example: AL53PD SAT 612 11-096 LLLLock chassis and spring cages only Less all possible components Sum of applicableExample: AL53LD LLL 626 LLL LLLdeductsNon-Standard Door ThicknessDescription Specify Add to Lock PriceExtended Equally (EE), over 1 7/8" – 2" Door thickness and how door is extended 3.90Example: 2", EEPrimus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels. SeeTerms & Conditions for more information.DescriptionAL-Series lock and Primus cylinderAL-Series lock and Primus full size interchangeable corecylinderSpecifyLock less cylinder (use L suffix). Order Primus cylinderseparately. See Cylinders.Example: 1 ea. AL50LD1 ea. 20-728Lock less full size core (use J suffix). Order Primus coreseparately. See Cylinders: Interchangeable Core.Example: 1 ea. AL80JD1 ea. 20-740Note:1) Primus is not available for Faculty Restroom function (AL85).AL-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Antimicrobial Coating, Tactile Warning, Torx ® Screws, Special OptionsOptions • ALAntimicrobial Coating⧖ Extended Factory Lead TimeDescription of Components CoatedFinish: 626AMAdd to Lock PriceRose TrimInside: Lever, RoseOutside: Lever, Rose $27.00Ordering notes for Antimicrobial Coatings:1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 daysfor manufacturing.2) Please specify 626AM on each line item requiring antimicrobial coating.3) For ease of identification, a sticker will be applied to a non-visible location on product.4) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Tactile Warning(SAT lever shown)Tactile WarningAdd to Lock PriceDescription Specify (per lever)Tactile Warning Preface the design code with 8 $35.60Available only on Sat designExample: 8SA for SATNote: 1) Outside lever only has tactile warning unless otherwise specified.Tamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceLatch and strike screws Torx screws $14.50Special Options⧖ Extended Factory Lead TimeNot subject to standard discount termsSpecifyDescription Lock Function "X" Number Add to Lock PriceAL50PD or AL53PD with restoring slide AL50PD or AL53PD XA11-297 $37.80Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-7

AL • PartsLock Trim: Levers, Levers and Related Parts, RosesLevers, StandardDesigns and FinishesJUP NEP OME SAT605 606 612619 625Part 626 Additional Leadtime 613Number Description 60951-021 Closed lever*51-023 Open lever*51-025 Closed lever**$57.20 $60.20 $65.2051-026 Open lever*** For locks manufactured before June 2003.* * For locks manufactured after June 2003.Levers and Related Parts, Interchangeable CoreDesigns and FinishesJUP NEP SAT605Part 606 612Number Description 626 619 625 61351-022 Full size core lever $48.70 $51.70 $56.7001-126* Full size core driver and retainer 8.90S605-241* Full size core retainer 2.90A700-019* Full size core driver, universal 6.3051-024** Small format core lever and lever insert 45.80 48.80 53.80A700-021* Small format core retainer 4.90C604-381* Small format core throw member 5.60D500-000*** Small format core spacer 1.00* Design and finish not required.** Also available in 609 finish.*** 2 spacers required for 6-pin, 1 spacer required for 7-pin.Note:1) To convert locks from full size to small format, chassis components are requiredin addition to small format core levers, retainers and throw members.RosesDesigns and FinishesRHO(use for JUP,OME(use for OMENEP & SAT designs)designs)605 606 612619 625PartAdditional LeadtimeNumber Description 626 609 61304-060 Rose $64.40 $67.40 $72.40AL-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Latches, StrikesParts • AL11-068 11-088 11-096 11-104 11-116LatchesPart Number Specify Hsg PriceSpringlatch Deadlatch Finish Backset Description Dia Each11-068 11-085 • Square corner, 1" x 2 1/4"11-069 11-088 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4"7/8"11-110 11-104 • 1" Circular drive-in, 605 and 626 finishes only 1"11-111 11-091 • Square corner, 1" x 2 1/4"$39.707/8"11-112 11-092 •2 3/4"1/4" Radius round corner, 1" x 2 1/4"11-116 11-096 • Square corner, 1 1/8" x 2 1/4", standard1"11-113 11-105 • 1" Circular drive-in, 605 and 626 finishes only11-118 11-103 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 1" 42.7039-030* • — Rabbeted latch and strike kit, 605 and 626 finishes only — 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-001 10-025 10-027 10-042 10-058StrikesPart Specify PriceNumber Finish Description Lip Length Each1 1/8" $7.2010-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10.201 1/2", 1 3/4", 2"10-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 7.8010-025* •* Specify lip length.ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 11.20ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2” 30.00K510-066 Box for ANSI strike — 4.9010-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.0010-027 • 1/4" Radius corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.0010-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 finish only — 193.0010-058 • Circular, adjustable, 1 3/4" diameter, 605 and 626 finishes only 1 7/32" 10.10Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-9

AL • PartsAccessories and Adapters,Backset Links and ReinforcementsF506-868G506-815Accessories and AdaptersPartPriceNumber Description EachF506-868 Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation Order inmultiples of 100$0.50G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 5.1041-005A501-565 A501-567Backset Links and ReinforcementsPartPriceNumber Description Each37-001* Metal door reinforcer kit, fits both 7/8" and 1" diameter housings $26.0041-005 5" Backset extension link 15.10A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. 13.10Fits both 7/8" and 1" diameter housings.A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. 13.10Fits both 7/8" and 1" diameter housings.A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to 8.10hold latch in metal doorsG506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 5.10* Specify door thickness, includes A501-567 and A501-565 or A501-566.Notes:1) 5" Backset extension links installed in 1" latch holes require one G506-815 sleeve to join latch and link.2) Links installed in metal doors require reinforcement.AL-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous PartsParts • ALMiscellaneous PartsPart Specify PriceNumber Finish Description EachA100-053 Spring cage, ins. - 4 prong for locks manufactured after May 2002 $44.30A100-054 Spring cage, out. - 4 prong for locks manufactured after May 2002 44.30A201-370 Cam - AL80 6.60A301-402 Cam - AL40, AL50, AL53, AL85 6.70A501-167 Threaded rod for mounting AL170s as double dummy set 11.10A501-305 Hub plate, ins. 5.20A501-311 Slide spring 5.00A501-615 Spindle wedge - AL80, AL85 4.90A501-721 Cam plug - AL70 15.10A501-791 Cam spacer - AL70 3.10A501-874 Hub plate, out. - AL25 7.80A501-901 Hub plate, out. - AL80, AL85 3.50A508-597 Spring seat - AL50, AL53, AL70, AL80, AL85 5.00A590-158 Slide - AL85 5.00A590-159 Slide - AL50, AL53, AL70, AL80 5.00A590-180 Slide, restoring - AL40 5.00A590-181 Slide, non-restoring - AL10, AL25 5.00A700-003 Spindle sleeve - AL85 5.00A700-004 Hub plate, out. (except AL25, AL80, AL85) 5.00A700-014 Hub, out. - AL70 - for locks manufactured after May 2003 22.40A700-015 Lever insert, 1 3/8" - 1 7/8" doors - for locks manufactured before May 2002 4.70A700-016 Hub, out., 1 3/8" – 1 7/8" doors - AL25 22.40A700-017 Spiral cam - AL70 7.80A700-036 Spring - AL40, AL44 6.70A700-039 Driver, 1 3/8" - 1 7/8" doors - for locks manufactured after May 2002 13.70A700-041 • Driver cap, 1 3/8" - 1 7/8" doors - for locks manufactured after May 2002 2.90A700-044 Lever insert, 1 3/8" - 1 7/8" doors - for locks manufactured after May 2002 4.70A700-045 Lever insert for SFIC 4.40A700-046 Hub, 1 3/8" - 1 7/8" doors - for locks manufactured after May 2003* 4.30A700-047 Interchangeable core lever insert, 1 3/8" - 1 7/8" doors 4.70A700-056 Frame, hub - for locks manufactured after May 2003 7.90A700-057 Housing - for locks manufactured after May 2003 7.90A710-001 Spindle & catch, out. (except AL10, AL40) 6.60A710-004 Spindle & catch, ins. 6.60A710-007 Spindle & hub - AL170 20.40A710-008 Small Format Interchangeable Core spindle & catch, outside - AL50, AL53, AL70, AL80 17.20A710-011 Spring cage, ins. - 2 prong for IC, 2” doors and locks manufactured before May 2002 44.30A710-012 Spring cage, out. - 2 prong for IC, 2” doors and locks manufactured before May 2002 44.30A710-020 Spindle & catch, out. - AL10, AL40 6.60C503-308 Anchor spring (except AL25) 5.00C604-273 Rose pin - AL25 1.10C604-354 Castle nut 11.80C604-400 Mounting plate - AL170 14.90C604-402 • Blank rose - AL25 64.10Note:1) A700-039 and A700-041 (Driver and Driver Cap) should be ordered together.Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-11

AL • PartsParts for 2" Doors, Plunger Units,Hub, Frame and Housing KitsParts for 2" DoorsPart Specify PriceNumber Finish Description EachA700-043 • Driver, 2" door $47.80A700-028 Hub, 2" door, for inside and outside - for locks manufactured after May 2003* 22.40A700-029 Hub, out., 2" doors - AL70 - for locks manufactured after May 2003* 27.80A700-030 Hub, out., 2" doors - AL25 27.80A700-033 Full size interchangeable core lever insert, 2" door 4.70A700-034 Lever insert, 2" door 4.70* For locks manufactured before May 2003, see AL: Hub, Frame and Housing Kits.Plunger UnitsPart Specify PriceNumber Finish Description Each51-037 • Plunger unit, ins. - AL5351-038 • Plunger unit, ins. - AL8551-039 • Plunger unit, ins. - AL40, AL44, AL50 $10.9051-040 • Plunger unit, out. - AL4051-041 • Plunger unit, out. - AL44Hub, Frame and Housing Kits — For Locks Manufactured before May, 2003Part Door PriceNumber Function Thickness Contents EachA700-048 All 1 3/8" - 1 7/8" (2) A700-032 Chassis screws (1) A700-056 Frame, hub $57.80(except AL25(2) A700-046 Hub (1) A700-057 HousingA700-050 and AL70) 2"(2) A700-032 Chassis screws (1) A700-056 Frame, hub(2) A700-028 Hub (1) A700-057 Housing(2) A700-032 Chassis screws (1) A700-056 Frame, hubA700-049 1 3/8" - 1 7/8" (1) A700-046 Hub (1) A700-057 Housing59.20(1) A700-014 HubAL70(2) A700-032 Chassis screws (1) A700-056 Frame, hubA700-051 2" (1) A700-028 Hub (1) A700-057 Housing(1) A700-029 HubAL-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Screws, Standard Screw Packs,Torx ® Screw Packs, Special PartsParts • ALScrewsPrice EachPart Specify (Order inNumber Finish Description Type Size multiples of 100)A501-171 • Washer, thru bolt - AL170 — — $0.74A501-746 • Mounting, thru bolt - AL170 POH Mach 1/4"-20 x 2 1/2" 0.74A700-032 Chassis PFH Cross Recess 10-32 x 3/8" 0.74C603-256 • ANSI strike PFH Combo 12-24 x 1" 0.68C603-897 • Latch and strike PFH Combo 8-32 x 3/4" 0.74C604-395 Spring cage screws PFH Mach 8-32 x 2 1/8" 1.10L583-133 Mounting surface - AL170 Sheet metal #8 x 1" 3.70Screw Packs, StandardPart Specify PriceNumber Finish Description Contents EachB202-517 • Latch and strike (4) C603-897 $5.40C203-736 • ANSI strike (2) C603-256 4.30C303-438 Spring cage screws (2) C604-395 3.20C303-029 • Mounting (4) C603-897 10.90(2) C604-395(2) C603-256(1) M504-271C303-421 • Mounting, AL170 (1) A501-167 8.00(1) A501-171(1) A501-746(2) L583-133(1) M504-271Screw Packs, Torx ®Part Specify PriceNumber Finish Description EachC203-311 • Latch and strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $13.90(2) L583-371 (T-20)Note:1) Torx screw packs are furnished with appropriate T-xx installation tool(s).Special Parts⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Description EachXQ07-351* •10-025 Strike, 7/8" flat lip $19.7010-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8", and 1 1/2") 91.60* Specify lip length.Note:2) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11AL-13

ALNotesAL-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctions B250-2Complete Locks B250-3Options B250-4Deadlatches . . . . . . . . . . . . . . . . . . . . . . . B250-4Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-4Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . B250-5Locks Less Components . . . . . . . . . . . . . B250-5Non-Standard Door Thickness . . . . . . . . . B250-5Tamper Resistant Screws andTorx ® Screws . . . . . . . . . . . . . . . . . . . . . . B250-6Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B250-6Special Options . . . . . . . . . . . . . . . . . . . . B250-6Parts B250-7Deadlatches . . . . . . . . . . . . . . . . . . . . . . . B250-7Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-7Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . B250-8Door Reinforcements . . . . . . . . . . . . . . . . B250-8Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-9Screw and Tailpiece Packs,Standard . . . . . . . . . . . . . . . . . . . . . . . . . B250-10Screw Packs, Torx ® . . . . . . . . . . . . . . . . B250-10Special Parts . . . . . . . . . . . . . . . . . . . . . B250-10Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationB2 50 P D XFinish Codesand DescriptionsB250Screw SuffixX = Cross Recess HeadMounting ScrewsLatch SuffixD = DeadlatchCylinder SuffixP = 5-Pin CylinderP6 = 6-Pin CylinderR = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreFunctionLock SeriesCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium PlatedStandard Features*Certification ANSI/BHMA Certified A156.5-2001, Grade 2 auxiliary lock.Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 9/16" throw deadlatchStrike 1 1/8" x 2 3/4", Square corner, T-strike, boxBackset 2 3/8"Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/8" – 1 3/4"Keys Two nickel silver cut keys per lock, 6-pin, C123 section**Trim Rings 7/16" and 1/8" Wrought brass or bronze, reinforced with security inserts* Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11B250-1

B250 • FunctionsANSI/BHMA Certified A156.5-2001, Grade 2 auxiliary lock.Bored Deadlatch LocksSCHLAGEANSIB250PD E2122 Single Cylinder Deadlatch (Night Latch)Deadlocking latchbolt retracted bykey from outside or by inside turnunit. Rotating turn unit and activatinghold-back feature keeps latchretracted.B252PD E2112 Double Cylinder Deadlatch*Deadlocking latchbolt retracted bykey from either side. No hold-backfeature.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.B250-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

B250-SeriesComplete Locks • B250Outside Cylinder TrimInside Cylinder TrimRose and TurnB250-SeriesFinishes626 605 613⧖ AdditionalLeadtime606 609Function Description 612 625Keyed, Single Cylinder FunctionsB250PD* Single cylinder outside, holdback turn inside $206 $212 $222* Available without holdback feature. See Special Options for detailsKeyed, Double Cylinder FunctionsCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.B252PD Double cylinder $227 $233 $243Notes:1) Split finishes are priced at the highest finish price.2) 6-Pin cylinders are available at no extra charge. Specify P6 suffix. Example: B250PD6.3) Specify door thickness for 6-pin cylinders used in 1 3/8" thick doors.4) Keying options: see Keys & Keying.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) Locks are not available less standard cylinderPrice Book 72AEffective July 18, 2011 • Rev. 7/11B250-3

B250 • OptionsDeadlatches, Strikes12-100StandardDeadlatchesHsgAdd toBackset Description Dia Specify Lock Price2 3/8" Square corner, 1 1/8" x 2 1/4", standard1"12-1002 3/4" Square corner, 1 1/8" x 2 1/4" 12-103N/C10-001Standard10-004 10-025StrikesLipAdd toDescription Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" 10-001 N/CSquare corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10-001 $5.601 1/2", 1 3/4",2"1/4" Radius round corner, T-strike, box, 1 18" x 2 3/4" 1 1/8" 10-004 N/CANSI, no box, 1 1/4 x 4 7/8"1 3/16"10-0255.801 3/8", 1 1/2" 11.10Box for ANSI strike, must be specified — K510-066 N/CNote:1) Electric strike (10-042) is available as a part. See B250 Parts: Strikes.Shaded items are standard components and arefurnished with locks unless otherwise specified.B250-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeble Core, Locks LessComponents, Non-Standard Door ThicknessOptions • B250Full Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceExample: B250RD $29.00Full size construction core** T suffix Add to Lock PriceExample: B250TD 29.00Less full size core J suffixExample: B250JDDeduct fromLock Price26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Note:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess deadlatch LLL for latch $14.70Example: B250PD 605 LLL 10-001Less strike LLL for strike 4.40Example: B250PD 605 12-100 LLLNote:2) Locks are not allowed to be ordered less standard cylinder (i.e., L suffix).Non-Standard Door ThicknessDescription Specify Add to Lock PriceOver 1 3/4" – 2 1/4" Door thickness N/COver 2 1/4" – 2 3/4" Door thickness $77.70Note:3) For doors over 2 3/4", see Special Options.Price Book 72AEffective July 18, 2011 • Rev. 7/11B250-5

B250 • OptionsTorx ® Screws, Trim, Special OptionsTamper Resistant Screws and Torx ® ScrewsAdd toDescription Specify Lock PriceCross recessed mounting screws and drive pins for X suffix N/CB250PDExample: B250PDXLatch and strike screws Torx screws $14.50Note:1) For parts specials, see B250 Parts: Special Parts.B202-671 B202-672TrimPart Specify PriceNumber Finish Description EachB202-671 • Rose and turn without holdback $33.30B202-672 • Rose and turn with holdback 50.50B502-711 Support (anchor) for turn mounting screws - B270 3.50B502-815 • Blank inside rose, exposed screws - B251, 19.00available 605 and 626 finshes onlyNote: 2) For trim rings and inserts, see Cylinders: B250.Special Options⧖ Extended Factory Lead TimeNot subject to standard discount termsSpecifyAdd toDescription Lock Function “X” Number Lock PriceB250PD for doors over 2 3/4" – 5 9/16" B250PD XB03-330* $88.40B252PD for doors over 2 3/4" – 5 9/16" B252PD XB03-427* 106.00B250PD less holdback (substitutes B400 turn) B250PD XB09-062 26.50* Specify door thickness.Note:3) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.B250-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadlatches, StrikesParts • B25012-100 39-030DeadlatchesPart Specify Hsg PriceNumber Finish Backset Description Dia Each12-100 • 2 3/8" Square corner, 1 1/8" x 2 1/4", standard1"$58.2012-103 • 2 3/4" Square corner, 1 1/8" x 2 1/4"39-030* • — Rabbeted latch and strike kit, 605 and 626 only — 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-001 10-004 10-025StrikesPart Specify PriceNumber Finish Description Lip Length Each10-001* • Square corner, box, T-strike, 1 1/8" x 2 3/4", standard 1 1/8" $7.2010-001* • Square corner, box, T-strike, 1 1/8" x 2 3/4" 1", 1 1/4", 10.201 1/2", 1 3/4",2"10-004 • 1/4" Radius round corner, box, T-strike, 1 1/8" x 2 3/4" 1 1/8" 7.8010-025* • ANSI, no box, 1 1/4" x 4 7/8"1 3/16" 11.201 3/8", 1 1/2" 30.0010-042 • Electric latch release, 606 and 626 only — 193.00C603-623 Box for T-strike — 0.44K510-066 Box for ANSI strike — 4.90* Specify lip length.Price Book 72AEffective July 18, 2011 • Rev. 7/11B250-7

B250 • PartsAdapters, Door Reinforcements38-031 38-032AdaptersPrice Each(per finish)Part SpecifyNumber Finish Description Contents 626 605 61338-016 • Adapter ring kit for double cylinder locks used in (2) 38-031 $19.20 $21.20 $23.202 1/8" hole38-017 • Adapter ring kit for single cylinder locks used in (1) 38-031 and 25.70 $27.20 29.702 1/8" hole (1) 38-03238-031 • 2 1/2" Diameter adapter ring for 2 1/8" door prep for — 9.10 $11.10 13.10under cylinder38-032 • 2 7/8" Diameter adapter ring for 2 1/8" door prep for — 16.50 $18.50 20.60under turn units/blank roses.A501-566Door ReinforcementsPartPriceNumber Description EachA501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings $13.10(2 required per lock)A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings 13.10(2 required per lock)B250-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

ScrewsParts • B250ScrewsDescription Application Price EachPart Specify (Order inNumber Finish Size Type Use with: Door Thickness multiples of 100)Single Cylinder, B250PD7/16" & 1/8" trim rings 5-Pin1 5/16" – under 1 11/16"B520-086 • 10-32 x 2 1/4" 7/16" trim ring 1 11/16" – 1 15/16"(2) 1/8" trim rings6-Pin1 5/16" – under 1 7/16"POH 7/16" & 1/8" trim rings 1 7/16" – 1 13/16"machine 7/16" trim ring5-Pinover 1 15/16" – 2 1/4" $0.701/8" trim ring over 2 1/4" – 2 9/16"B520-087 • 10-32 x 2 5/8" 7/16" & 1/8" trim rings over 1 13/16" – 1 15/16"7/16" trim ring 6-Pin over 1 15/16" – 2 9/16"1/8" trim ring over 2 9/16" – 2 3/4"Double Cylinder, B252PD7/16" & 1/8" trim rings 1 5/16" – under 1 11/16"B520-267 10-32 x 2 1/2" 7/16" trim ring 5-Pin 1 11/16" – 1 15/16"1/8" trim ring 2 7/16" – 2 11/16"7/16" & 1/8" trim rings over 1 7/16" – under 1 11/16"7/16" trim ring 5-Pin over 1 15/16" – under 2 7/16"B520-268 10-32 x 2 3/4" Cross 1/8" trim ring over 2 11/16" – 2 7/8"recess 7/16" & 1/8" trim rings 1 7/16" – under 1 9/16" $1.507/16" trim ring 6-Pin over 1 11/16" – 2 3/16"1/8" trim ring over 2 11/16" – 2 13/16"(4) 1/8" trim rings 1 3/16" – under 1 7/16"B520-269 10-32 x 3" 7/16" & 1/8" trim rings 6-Pin 1 9/16" – 1 15/16"7/16" trim ring over 2 13/16" – 2 11/16"1/8" trim ring over 2 13/16" – 3 1/8"B520-271 • Drive pin — — 0.70Interchangeable Core, Single Cylinder, B250RDB520-086 • 10-32 x 2 1/4"1" & 1/8" trim rings 1 5/16" – 1 1/2"POH 1" trim ring over 1 1/2" – 2 1/8"machine 1" trim ring over 2 1/8" – 2 3/8" $0.70B520-087 • 10-32 x 2 5/8" 7/16" & 1/8" trim rings over 2 3/8" – 2 5/8"7/16" trim ring over 2 5/8" – 3 1/8"Interchangeable Core, Double Cylinder, B252RD1" & 1/8" trim rings 15/16" – 1 5/8"B520-269 10-32 x 3"1" trim ring over 1 5/8" – 2 1/8"Cross 7/16" & 1/8" trim rings over 2 1/8" – 2 3/8"recess 1" trim ring over 2 3/8" – 2 5/8"$1.50B520-271 • Drive pin — — 0.70All FunctionsC603-256 • 12-24 x 1" PFH ANSI strike — $0.66C603-897 • 8 x 3/4" combo Latch and strike — 0.74Price Book 72AEffective July 18, 2011 • Rev. 7/11B250-9

B250 • PartsStandard Screw and Tailpiece Packs,Torx ® Screw Packs, Special PartsScrew and Tailpiece Packs, StandardPart Specify PriceNumber Finish Door Thickness Contents EachSingle Cylinder, B250PDB202-509 • 1 3/8" – 1 3/4" (1) B202-558 $6.10(2) B520-086Double Cylinder, B252PDB202-560 • 5-Pin: 1 1/2" – 1 3/4", 2 1/2" (2) B202-370(2) B202-580(2) B520-267(2) B520-271 $12.20B220-043 • 6-Pin: 1 5/8", 1 3/4", 3" (2) B202-369or 1 3/8", 1 3/4", 2 1/4", 2 1/2", 2" (2) B520-269All FunctionsB202-517 • — (4) C603-897 $5.40Note: 1) Tailpieces can be purchased separately: see Cylinders: B250.Screw Packs, Torx ®Part Specify PriceNumber Finish Description Contents EachC203-311 • Latch and strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $13.90(2) L583-371 (T-20)Note:2) Torx screw packs are furnished with appropriate T-xx installation tool(s).Special Parts⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Description EachXQ07-351* • 10-025 Strike, lips thru 6" (except 7/8", 1 3/16",1 3/8" and 1 1/2") $95.30XQ03-493* • 10-001 Strike, over 2" thru 6" lip 81.30* Specify lip length.Note: 3) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.B250-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctions B500-2Complete Locks B500-3Options B500-4Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . B500-4Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-4Full Size Interchangeable Core . . . . . . . . B500-5Less Full Size InterchangeableCore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-5Small Format InterchangeableCore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-6Less Small Format InterchangeableCore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-6Small Format Disposable Core . . . . . . . . .B500-6Locks Less Components . . . . . . . . . . . . . B500-7Primus ® . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-7Parts B500-8Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-8Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . B500-8Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . B500-9Adapters . . . . . . . . . . . . . . . . . . . . . . . . B500-10Door/Frame Reinforcements . . . . . . . . . B500-10Screws . . . . . . . . . . . . . . . . . . . . . . . . . . B500-11Screw Packs . . . . . . . . . . . . . . . . . . . . . . B500-11Special Screw and Tailpiece Packs . . . . B500-11Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationB5 60 P FB500UL Listing SuffixF = UL ListedCylinder SuffixP = 6-Pin CylinderL = Less 6-Pin CylinderR = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreBD = Less SFICBDC = Disposable SFICGD = Everest ® Patented SFICHD = Construction SFICFunctionLock SeriesSFIC = Small Format (Best ® Style) Interchangeable CoreFinish Codesand DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated626AMAntimicrobial Coatingon Satin Chromium643eAged BronzeStandard Features*Certification ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.Deadbolt 1" x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throwStrike 1 1/8" x 2 3/4", Square corner, boxBackset Adjustable for 2 3/8" or 2 3/4"Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/8" – 1 3/4" standard cylinder, 1 5/8" - 2" interchangeable core cylinderKeys Two cut keys per lock, 6-pin, C123 section**Reinforcement Metal dust box reinforcer with three - 3˝ screwsTrim Ring 1" Wrought brass or bronze, reinforced with security insert* Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11B500-1

B500 • FunctionsANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.Bored Deadbolt LocksSCHLAGEANSIB560P E0152 Single Cylinder Deadbolt LockDeadbolt thrown or retracted by keyfrom outside or by inside turn unit.Bolt automatically deadlocks whenfully thrown.B562P E0142 Double Cylinder Deadbolt Lock*Deadbolt thrown or retracted by keyfrom either side. Bolt automaticallydeadlocks when fully thrown.B580 E0192 Door BoltDeadbolt thrown or retracted by turnunit only. No outside trim. Boltautomatically deadlocks when fullythrown. Requires 1 1/2" cross bore prep.B581 E0112 Door Bolt with TrimDeadbolt thrown or retracted by turnunit only. Outside blank plate.Bolt automatically deadlocks whenfully thrown. Requires 1 1/2" cross bore prep.B563P E0172 Classroom Deadbolt LockDeadbolt thrown or retracted by keyoutside. Inside turn unit will retractbolt only. Bolt automaticallydeadlocks when fully thrown.B561P E0162 One-Way Deadbolt LockDeadbolt thrown or retracted by keyonly. Blank plate inside. Boltautomatically deadlocks when fullythrown.B571Door Bolt Occupancy IndicatorDeadbolt thrown or retracted by insideturn unit. Occupancy indicator onoutside (reads either in use or vacant).Requires 1 1/2" cross bore prep.Not UL Rated.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.B500-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

B500-SeriesComplete Locks • B500Outside Cylinder Trim Inside Cylinder Trim Rose and TurnB500-SeriesFinishes626 605 606 613609 612619 625Function Description 643eKeylessB580 No trim outside, Turn bolt inside $50 $56 $66B580F No trim outside, Turn bolt inside, Fire rated 57 63 73B581 Blank plate outside, Turn bolt inside 50 56 66B581F Blank plate outside, Turn bolt inside, Fire rated 57 63 73B571 Occupancy indicator outside, Turn bolt inside, 52 58 68One 61-509 Emergency Release Key includedNot UL RatedKeyed, Single CylinderB560P Single cylinder outside, Turn bolt inside $64 $70 $80B560PF Single cylinder outside, Turn bolt inside, Fire rated 70 76 86B561P One way cylinder outside, Blank plate inside 62 68 78B561PF One way cylinder outside, Blank plate inside, Fire rated 70 76 86B563P Classroom cylinder outside, Retraction turn bolt inside 67 73 83B563PF Classroom cylinder outside, Retraction turn bolt inside, Fire rated 73 79 89Keyed, Double CylinderCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.B562P Double cylinder $86 $92 $102Notes:1) Split finishes are priced at the highest finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.Price Book 72AEffective July 18, 2011 • Rev. 7/11B500-3

B500 • OptionsDeadbolts, Strikes12-288 Standard12-289 12-29012-287DeadboltsHsgAdd toBackset Description Dia Specify Lock PriceSquare corner, 1" x 2 1/4", standard 1" 12-2881/4" Radius round corner, 1" x 2 1/4" 1" 12-2892 3/8" Circular, drive-in, 626 only 1" 12-290orN/CTriple option, 1/4" radius round corner faceplate with 1" x 2 1/4" square 1" 12-2872 3/4" corner and circular faceplatesSquare corner, 1 1/8" 1" 12-2915" Square corner, 1 1/8" x 2 1/4" 1" 12-633 $18.50For UL Listed Locks2 3/8" Square corner, 1" x 2 1/4", standard 1" 12-294 N/Cor2 3/4"10-094Standard10-064 10-087 10-092 10-09510-108StrikesLipAdd toDescription Length Specify Lock PriceCircular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only — 10-064 N/CANSI, box, 1 1/4" x 4 7/8" 1 3/16" 10-087 $5.401/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-092Square corner, 1 1/8" x 2 3/4", standard — 10-094Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-095Round corner, 1 1/8" x 2 3/4" — 10-1081/4" Round corner, 1 1/4" x 3 5/8", 4 hole, 605, 609, 620, 630 only — 10-104 N/Cno reinforcement strike provided1/4" Round corner, 1" x 2 1/4", 605, 609, 630 only — 10-103no reinforcement strike provided2" strike reinforcing screws, 605, 609, 630, 643e only — J250-028Strike reinforcer, use with 10-094, 10-108 — 37-016Shaded items are standard components and arefurnished with locks unless otherwise specified.B500-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeable CoreOptions • B500Full SizeInterchangeable CoreFull Size Interchangeable Core, Doors 1 5/8" – 2"Finishes605 606609 612619 625Function Description 626 643e 613Keyed, Single CylinderB560R Single core outside, turn inside $127 $133 $143B560RF Single core outside, turn inside (UL listed) 132 138 148B561R Single core outside, blank plate inside 127 133 143B561RF Single core outside, blank plate inside (UL listed) 132 138 148B563R Single core outside, classroom turn inside 129 135 145B563RF Single core outside, classroom turn inside (UL listed) 135 141 151Keyed, Double CylinderB562R Double core $177 $183 $193Notes:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Locks are furnished 1-bitted, with two 6-pin keys, unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) For full size construction core, specify T suffix. Example: B560T. Available at no additional charge. Locks are assessedone non-refundable handling charge (50-231) per core. See Keys & Keying for details.5) For 1-3/8” to 1-5/8” door thickness, see page B500-7.Less Full Size Interchangeable Core, Doors 1 5/8" – 2"Finishes605 609612 619Function Description 626 625 643e 613Less Full Size Interchangeable Core, Single CylinderB560J Less single core outside, turn inside $87 $93 $103B560JF Less single core outside, turn inside (UL listed) 93 99 109B561J Single core outside, blank plate inside 87 93 103B561JF Single core outside, blank plate inside (UL listed) 93 99 109B563J Single core outside, classroom turn inside 89 95 105B563JF Single core outside, classroom turn inside (UL listed) 95 101 111Less Full Size Interchangeable Core, Double CylinderB562J Less double core $95 $101 $111Price Book 72AEffective July 18, 2011 • Rev. 7/11B500-5

B500 • OptionsSmall Format Interchangeable CoreSmall FormatInterchangeable CoreSmall Format Interchangeable Core, Doors 1 5/8" – 2"Finishes605 606609 612619 625Function Description 626 643e 613Keyed, Single CylinderB560GD Single core outside, turn inside $138 $144 $154B560GDF Single core outside, turn inside (UL listed) 144 150 160B561GD Single core outside, blank plate inside 138 144 154B561GDF Single core outside, blank plate inside (UL listed) 144 150 160B563GD Single core outside, classroom turn inside 140 146 156B563GDF Single core outside, classroom turn inside (UL listed) 146 152 162Keyed, Double CylinderB562GD Double core $191 $197 $207Notes:1) Key symbol must be specified. Everest ® B Family keyways are restricted. See Terms & Conditions for more information.2) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.3) For small format construction core, specify suffix HD. Example: B560HD. Available at no additional charge. Locksare assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Less Small Format Interchangeable Core, Doors 1 5/8" – 2"Finishes605 609612 619Function Description 626 625 643e 613Less Small Format Interchangeable Core, Single CylinderB560BD Less single core outside, turn inside $87 $93 $103B560BDF Less single core outside, turn inside (UL listed) 94 100 110B561BD Single core outside, blank plate inside 87 93 103B561BDF Single core outside, blank plate inside (UL listed) 94 100 110B563BD Single core outside, classroom turn inside 89 95 105B563BDF Single core outside, classroom turn inside (UL listed) 97 103 113Less Small Format Interchangeable Core, Double CylinderB562BD Less double core $97 $103 $113Notes:4) For small format disposable core, specify suffix BDC. Example: B560BDC. Available at no additional charge.B500-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Locks Less Components, Primus ® ,Non-Standard FinishesOptions • B500Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess deadbolt LLL for deadbolt $10.50Example: B560P 605 LLL 10-092Less strike LLL for strike 4.30Example: B560P 605 12-288 LLLLess standard cylinder, L suffix 14.00B560* Example: B560LLess standard cylinder, L suffix 28.00B562* Example: B562L* Locks are furnished less 22-003 cylinder(s) only.Primus ® XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionB500-Series lock and Primus cylinderB500-Series lock and Primus full sizeinterchangeable core cylinderAntimicrobial Coating⧖ Extended Factory Lead TimeNon Standard Door ThicknessSpecifyLock less cylinder (use L suffix). Order Primus cylinderseparately. See B500: Complete Cylinders.Example: 1 ea. B560L1 ea. 20-729Lock less full size core (use J suffix). Order Primus coreseparately. See Cylinders: Interchangeable Core.Example: 1 ea. B562J2 ea. 20-740Description of Components CoatedFinish: 626AMAdd to Deadbolt PriceInside Thumbturn, RoseOutside Trim Ring, Cylinder Faceplate $13.50Ordering notes for all Antimicrobial Coatings:1) Extended Factory Lead Times Apply.Please place antimicrobial coated orders separately, and allow 30 days for manufacturing.2) Please specify 626AM or 630AM on each line item requiring antimicrobial coating.3) For ease of identification, a sticker will be applied to a non-visible location on product.4) If you are unable to find your required hardware solution in this price book, please refer to our Custom Product RequestProcess on page iv.Add toDescription Specify Lock PriceExtended Equally (EE) Over 1 3/4" to 2 1/4"(except interchangeable core locks)Door thickness and how door is extendedExample 2", EE N/CExtended Equally (EE) 1 3/8" to 1 5/8"(for interchangeable core locks)Door thickness and how door is extendedExample 1 3/8", EE $7.00Note:5) For doors over 2 1/4" to 4" thick, please refer to our Custom Product Request Process.Price Book 72AEffective July 18, 2011 • Rev. 7/11B500-7

B500 • PartsTrim, DeadboltsB302-041 B600-018 12-626B302-045TrimPart Specify PriceNumber Finish Description EachB302-041 • Rose and turn $31.20B600-018 Mounting plate for rose and turn 6.9012-626 • Blank rose, exposed screws 17.1038-034 • Blank mounting plate kit for use on one side of B580 64.00B302-045 • Classroom rose and turn 31.20Note: 1) For trim rings and inserts, see Cylinders: B500.12-28812-289 12-290 12-287DeadboltsPart Specify Hsg PriceNumber Finish Backset Description Dia Each12-288 • Square corner, 1" x 2 1/4"1" $28.9012-289 • 2 3/8" 1/4" Radius round corner, 1" x 2 1/4"12-290 or 1" Circular drive-in, 626 only 1" 28.9012-287 • 2 3/4" Triple option, 1/4" radius round corner faceplate with 1" x 2 1/4"square corner and circular faceplates1" 36.2012-291 • Square corner, 1 1/8" x 2 1/4" 1" 28.9012-633 • 5" Fixed backset, square corner, 1 1/8" x 2 1/4" 1" 61.3039-030* • — Rabbeted deadbolt and strike kit, 605 and 626 only — 38.40*This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.B500-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

StrikesParts • B50010-064 10-087 10-092 10-094 10-095 10-108StrikesPart Specify PriceNumber Finish Description Lip Length Each10-064 Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only — $11.0010-087 • ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 15.0010-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.0010-094 • Square corner, no box, 1 1/8" x 2 3/4", standard — 11.3010-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.00B520-283 Plastic dust used with 10-094 and 10-108 — 0.4810-103 • 1/4" Round corner, 1" x 2 1/4", 605, 609, 630 only — 2.1010-104 • 1/4" Round corner, 1 1/4" x 3 5/8", 4 hole (605, 609, 630 only) — 2.5010-108 • Round corner, 1 1/8" x 2 3/4", no box — 12.1010-112 Metal dust box and 3 screws, use with 10-094, 10-108 — 12.1037-016 Strike reinforcer, use with 10-094, 10-108 — 10.50Price Book 72AEffective July 18, 2011 • Rev. 7/11B500-9

B500 • PartsAdapters, Door/Frame Reinforcements38-031 B520-649B520-650Accessories & AdaptersPrice Each605 609Part Specify 612 619Number Finish Description 626 625 643e 61338-031 • 2 1/2" Diameter adapter ring for 2 1/8" door preparation,for under cylinder $9.10 $11.10 $13.10B520-649 • Trim ring w/shield for B560 / B562 12.10 14.10 16.10B520-650 • Trim ring w/shield for IC functions 12.10 14.10 16.10F506-868 • Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation Order in multiples of 100$0.48JambA501-566B520-622MetalDust Boxreinforcer3˝ ScrewStrikeStudDoor/Frame ReinforcementsPartPriceNumber Description EachA501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings(2 required per lock)A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings$13.10(2 required per lock)37-016 Door frame strike reinforcer 10.50B520-622 Metal dust box reinforcer 10.50Occupancy Indicator Emergency KeyPartPriceNumber Description Each61-509* Emergency release key standard size, for B571 occupancy indicator deadbolts $6.4061-510* Emergency release key large size, for B571 occupancy indicator deadbolts 12.50* Includes one key, ring, and instruction tag.B500-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Screws, Screw Packs,Special Screw and Tailpiece PacksParts • B500ScrewsDescription Application Price Each(Order inPart Specify multiplesNumber Finish Size Type Use Door Thickness of 100)Keyless, B580B600-066 • 6-32 x 1/4" PH mach. Turn — $0.70B600-048 8-32 x 1/2" PH mach. Mounting plate — 0.70F506-359 8 x 3/4" RH wood Mounting plate — 0.62Keyed, Single Cylinder, B560P, B563PB600-100 1/4"-28 x 1 15/16" POH mach. Mounting 1 3/8" - 1 3/4" $1.50B600-101 1/4"-28 x 2 1/2" POH mach. Mounting over 1 3/4" - 2 1/4" 1.50B600-066 • 6-32 x 1/4" PH mach. Turn — 0.70B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 1.50Keyed, Single Cylinder, B560GD, B563GD, B560R, B563RB600-100 1/4"-28 x 1 15/16" POH mach. Mounting 1 3/8" - 2 1/4" $1.50B600-066 • 6-32 x 1/4" PH mach. Turn — 0.70Keyed, Double Cylinder, B562PB600-047 1/4"-28 x 3 13/64" PH mach. Mounting 1 3/8" - 1 3/4" $1.50B600-078 1/4"-28 x 3 29/64" PH mach. Mounting over 1 3/4" - 2 1/4" 1.50B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 1.50Keyed, Double Cylinder, B562GD, B562RB600-053 1/4"-28 x 2 61/64" PH mach. Mounting 1 3/8" - 2 1/4" $1.50B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 1.50Keyless, B571, B581B520-662 10-32 x 1 1/8" POH mach. Mounting 1 3/8" - 1 3/4" $1.50B520-663 10-32 x 1 3/4" POH mach. Mounting over 1 3/4" - 2 1/4" 1.50B600-066 • 6-32 x 1/4" PH mach. Turn — 0.70All FunctionsC603-897 • 8 x 3/4" PFH combo Deadbolt and strike screw — $0.74J250-028 8 x 2" PFH wood 2˝ strike screw — 0.70R525-256 12 x 3" PFH wood 3˝ Metal dust box screw — 0.70Price Book 72AEffective July 18, 2011 • Rev. 7/11B500-11

B500Screws, Screw Packs,Special Screw and Tailpiece PacksScrew PacksPart Specify PriceNumber Finish Door Thickness Contents EachKeyless, B58061-506 • 1 3/8" – 2 1/4" (2) B600-048(2) F605-359(4) C603-897 $11.30(1) B600-018(2) B600-066Keyed, Single Cylinder, B560P, B563P61-500 • 1 3/8" – 1 3/4" (1) B600-018(2) B600-100 $9.40(2) B600-066(4) C603-89761-501 • over 1 3/4" – 2 1/4" (1) B600-018(2) B600-101 9.40(2) B600-066(4) C603-897Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R61-500 • 1 3/8" – 2" (1) B600-018(2) B600-100 $9.40(2) B600-066(4) C603-897Keyed, Double Cylinder, B562P61-502 1 3/8" – 1 3/4" (2) B600-047 $6.60(4) C603-89761-503 over 1 3/4" – 2 1/4" (2) B600-078 6.60(4) C603-897Keyed, Double Cylinder, B562GD, B562R61-507 1 3/8" – 2" (2) B600-053 $6.60(4) C603-897Keyless, B581, B57161-504 • 1 3/8" – 1 3/4" (2) B520-662(4) C603-897 $14.80(2) B600-066(1) B600-01861-505 • over 1 3/4" – 2 1/4" (2) B520-663(4) C603-897 14.80(2) B600-066(1) B600-018Note: 1) For tailpieces and cylinders see Cylinders: B500.B500-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctions B600-2Complete Locks B600-3B600-Series . . . . . . . . . . . . . . . . . . . . . . . B600-3B700-Series: Primus ® ControlledAccess . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-4B800-Series: Primus High Security . . . . . B600-4Options B600-5Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . B600-5Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-5Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . B600-6Small Format Interchangeable CoreSmall Format Construction Core . . . . . . . B600-6Locks Less Components . . . . . . . . . . . . . B600-7Non-Standard Door Thickness . . . . . . . . . B600-7Tamper Resistant Torx ® Screws . . . . . . . B600-7Parts B600-8Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-8Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . B600-8Deadbolts, Less Faceplate . . . . . . . . . . . B600-9Faceplate Kits, Deadbolt . . . . . . . . . . . . . B600-9Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-9Door/Frame Reinforcements . . . . . . . . . B600-10Screws . . . . . . . . . . . . . . . . . . . . . . . . . B600-10Screw and Ball Bearing Packs . . . . . . . B600-10Screw Packs, Torx ® . . . . . . . . . . . . . . . . B600-11Special Parts . . . . . . . . . . . . . . . . . . . . . B600-11Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationB6 60P XB600/700/800Screw SuffixX =Torx ® screwsCylinder SuffixP = 6-Pin CylinderR = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreBD = Less SFICBDC = Disposable SFICGD = Everest ® Patented SFICHD = Construction SFICFunctionLock SeriesB6 = ConventionalB7 =Primus ® Controlled AccessB8 = Primus High SecuritySFIC = Small Format (Best ® Style) Interchangeable CoreFinish Codes and DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Satin Brass, Blackened612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US26D) Satin Chromium Plated626AMAntimicrobial Coatingon Satin Chromium643e (US11) Aged BronzeStandard FeaturesLocks are furnished with standard features unless otherwise specified.Certification ANSI/BHMA Certified A156.5-2001, Grade 1 auxiliary lock.UL Listed for 3-hour fire door, B800-Series is UL437 listed.Deadbolt 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throwStrike 1 1/8" x 2 3/4", Square corner, boxBackset 2 3/4"Door Range 1 5/8" – 2"Reinforcement Metal dust box reinforcer with two 3" screwsTrim Rings 7/8" Solid brass or bronzeCylinder* 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)Keys* Two nickel silver cut keys per lock, 6-pin, C123 section* Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11B600-1

B600/700/800 • FunctionsANSI/BHMA Certified A156.5-2001, Grade 1 auxiliary lock.UL Listed for 3-hour fire door, B800-Series is UL437 listed.Bored Deadbolt LocksSCHLAGEANSIB660PB760PB860P E2151 Single Cylinder Deadbolt LockDeadbolt thrown or retracted by keyfrom outside or by inside turn unit.Bolt automatically deadlocks whenfully thrown.B662PB762PB862P E2141 Double Cylinder Deadbolt Lock*Deadbolt thrown or retracted by keyfrom either side. Bolt automaticallydeadlocks when fully thrown.B661PB761PB861P E2161 One-Way Deadbolt LockDeadbolt thrown or retracted by keyonly. Blank plate inside. Boltautomatically deadlocks when fullythrown.B663PB763PB863P E2171 Classroom Deadbolt LockDeadbolt thrown or retracted by keyoutside. Inside turn unit will retractbolt only. Bolt automaticallydeadlocks when fully thrown.B664PB764PB864P E2101 Cylinder LockDeadbolt thrown or retracted by keyfrom one side. No inside trim. Boltautomatically deadlocks when fullythrown. Requires 1 1/2" cross bore only.B680 E2191 Door BoltDeadbolt thrown or retracted by turnunit only. No outside trim. Boltautomatically deadlocks when fullythrown. Requires 1 1/2" cross bore only.Door range is 1 3/8" - 2 1/2".* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.B600-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

B600Complete Locks • B600/700/800Outside Cylinder Trim Inside Cylinder Trim Rose and TurnB600-SeriesFinishes626 605 606 613609 612619 625Function Description 643eKeylessB680 No trim outside, Turn bolt inside $119 $125 $135Keyed, Single CylinderB660P Single cylinder outside, Turn bolt inside $151 $157 $167B661P One way cylinder outside, Blank plate insideB663P Classroom cylinder outside, Retraction turn bolt inside 157 163 173B664P Single cylinder outside, No trim inside 151 157 167Keyed, Double CylinderCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.B662P Double cylinder $193 $199 $209Notes:1) Split finishes are priced at the highest finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) B600 not available less cylinderPrice Book 72AEffective July 18, 2011 • Rev. 7/11B600-3

B600/700/800 • Complete LocksB700, B800Primus ® ControlledAccess Cylinder TrimB700-SeriesFinishes626 605 606 613609 612619 625Function Description 643eKeyed, Single CylinderB760P Single cylinder outside, Turn bolt inside $209 $215 $225B761P One way cylinder outside, Blank plate insideB763P Classroom cylinder outside, Retraction turn bolt inside 217 223 233B764P Single cylinder outside, No trim inside 209 215 225Keyed, Double CylinderCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.B762P Double cylinder $306 $312 $322Primus ® High SecurityCylinder TrimULB800-Series: Primus High SecurityNotes:Primus cylinders are offered for sale through specificchannels of distribution based on security levels.See Terms & Conditions for more information.Finishes626 605 606 613609 612619 625Function Description 643eKeyed, Single CylinderB860P Single cylinder outside, Turn bolt inside $227 $233 $243B861P One way cylinder outside, Blank plate insideB863P Classroom cylinder outside, Retraction turn bolt inside 241 247 257B864P Single cylinder outside, No trim inside 227 233 243Keyed, Double CylinderCAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.B862P Double cylinder $322 $328 $3381) Split finishes are priced at the highest finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) B700 and B800 not available less cylinderB600-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolts, StrikesOptions • B600/700/80012-631Standard12-64112-297 12-317DeadboltsHousingAdd toBackset Description Diameter Specify Lock Price2 3/8"Square corner, 1 1/8" x 2 1/4" 1" 12-630Circular, drive-in, 626 only 1 1/16" 12-6402 3/4"Square corner, 1 1/8" x 2 1/4", standard 1" 12-631Circular, drive-in, 626 only 1 1/16" 12-641N/C3 3/4"Square corner, 1 1/8" x 2 1/4" 1" 12-632Circular, drive-in, 626 only 1 1/16" 12-6425"Square corner, 1 1/8" x 2 1/4" 1" 12-633Circular, drive-in, 626 only 1 1/16" 12-643$18.502-3/8 or 2-3/4"Square corner, 1-1/8" x 2-1/4", adjustable backset 1" 12-297Circular, drive-in, 626 only, adjustable backset 1" 12-317N/C* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-094Standard10-064 10-087 10-092 10-095StrikesLipAdd toDescription Length Specify Lock PriceSquare corner, 1 1/8" x 2 3/4", standard10-094-Circular drive-in, thimble-strike, 1 3/16" diameter, 494 (for 626) only 10-064ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 1 3/16" 10-0871/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8"10-0921 1/8"Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-095 N/C1/4" Round corner, 1 1/4" x 3 5/8", 4 hole, metal dust box, 605, 609, 620, 630 10-1041/4" Round corner, 1" x 2 1/4", 605, 609, 630 only10-103-Strike reinforcer, use with 10-094 37-0162" mounting screws, 605, 609, 630 only J250-028Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11B600-5

B600/700/800 • OptionsFull Size Interchangeable Core,Small Format Interchangeable CoreFull SizeInterchangeable CoreFull Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceExample: B660R $29.00Full size construction core** T suffix, B600-Series only Add to Lock PriceExample: B660T 29.00Less full size core J suffix, B600-Series only Deduct fromExample: B660JLock Price26.00* B600R locks are furnished 1-bitted, with two 6-pin keys, unless otherwise specified. B600R locks are not available with0-bitted interchangeable cores.B700R locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Notes:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Full size interchangeable core is not available for B664, B764, and B800-Series lock functions.Small FormatInterchangeable CoreSmall Format Interchangeable CoreSmall Format Construction CoreAdd to Lock PriceDescription Specify (per core)Everest ® patented core* GD Suffix $62.00Example: B660GDSmall format construction core** HD Suffix 34.00Example: B660HDLess small format core BD Suffix N/CExample: B660BDSmall format disposable core BDC suffix N/CExample: B660BDC* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.Notes:3) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying.4) Small format interchangeable core is not available for B664, B700-Series and B800-Series lock functions.B600-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Locks Less Components, Non-Standard Door Thickness,Torx ® ScrewsOptions • B600/700/800Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess deadbolt LLL for deadbolt $13.90Example: B660P 605 LLL 10-064Less strike LLL for strike 4.40Example: B660P 605 12-630 LLLLess key blanks, B700 and B800 only LKB 10.40Note: 1) Less cylinder option not available.Non-Standard Door ThicknessDescription Specify Add to Lock Price1 3/8"* 1 3/8" Thick door $7.40Extended Equally (EE), over 2" – 2 1/2" (except Door thickness and how door is extendedsmall format interchangeable core locks)** Example: 2 1/4", EE* Not available for interchangeable core locks.** For small format interchangeable core locks, see Special Parts for conversion kits.Note: 2) For doors over 2 1/2" – 4" thick, see Special Parts for conversion kits.N/CTamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceLatch, strike, and mounting screws X suffix $14.70Example: B660PXNote:3) Tamper resistant screws not available for small format interchangeable core locks.4) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Antimicrobial Coating⧖ Extended Factory Lead TimeDescription of Components CoatedFinish: 626AMAdd to Deadbolt PriceInside Thumbturn, RoseOutside Trim Ring, Cylinder Faceplate $13.50Ordering notes for Antimicrobial Coatings:1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 daysfor manufacturing.2) Please specify 626AM on each line item requiring antimicrobial coating.3) For ease of identification, a sticker will be applied to a non-visible location on product.4) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11B600-7

B600/700/800 • PartsTrim, Deadbolts12-617B600-017TrimPart Specify PriceNumber Finish Description Each12-617 • Rose and turn $31.3012-618 • Rose and turn, classroom 34.9012-625 Classroom driver kit 7.0012-626 • Blank inside rose, exposed screws, B661 16.9038-034 • Blank mounting plate kit for use on one side of B664, B680 64.00B600-017 Security shield, 2 1/8" door preparation 7.00B600-018 Mounting plate, turn 7.00B610-035 Support (anchor) and mounting screws, B664 18.20Note:1) For trim rings and cylinders see Cylinders: B600/700/800.12-297 12-31712-631 12-641DeadboltsPart Specify Hsg PriceNumber Finish Backset Description Dia Each12-297 • 2-3/8 or Square corner, 1-1/8" x 2-1/4", adjustable backset12-317 2-3/4" Circular, drive-in, 626 only, adjustable backset1" $39.6012-630 •2 3/8"Square corner, 1 1/8" x 2 1/4" 1"12-640 Circular, drive-in, 626 only 1 1/16"12-631 •2 3/4"Square corner, 1 1/8" x 2 1/4", standard 1"12-641 Circular, drive-in, 626 only 1 1/16"35.1012-632 •3 3/4"Square corner, 1 1/8" x 2 1/4" 1"12-642 Circular, drive-in, 626 only 1 1/16"12-633 •5"Square corner, 1 1/8" x 2 1/4" 1"12-643 Circular, drive-in, 626 only 1 1/16"61.3039-030* • — Rabbeted deadbolt and strike kit, 605 and 626 only — 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.B600-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolts, Faceplate Kits, StrikesParts • B600/700/800Deadbolts, Less FaceplatePart Hsg PriceNumber Backset Description Dia Each12-650 2 3/8"12-651 2 3/4"12-652 3 3/4"12-653 5"Deadbolt unit less faceplate 1" $27.70Deadbolt unit less faceplate 1" 54.10Faceplate Kits, DeadboltPart Specify PriceNumber Finish Description Each12-627 • Square corner faceplate, 1 1/8" x 2 1/4", backplate and screws12-628 Circular drive-in faceplate and collar, 626 only$7.1010-094Standard10-064 10-087 10-092 10-095StrikesPart Specify Lip PriceNumber Finish Description Length Each10-094 • Square corner, 1 1/8" x 2 3/4", standard $11.3010-064 • Circular drive-in, thimble-strike, 1 3/16" diameter,494 (for 626) only—11.0010-087 • ANSI, box, 1 1/4" x 4 7/8" 1 3/16" 15.0010-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"10-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8" 6.80B520-283 Box for standard strike 0.50K510-066 Box for ANSI strike 4.9010-103 • 1/4" Round corner, 1" x 2 1/4", metal dust box, 605, 609, 630 only — 2.1010-104 • 1/4" Round corner, 1 1/4" x 3 5/8", 4 hole, 605, 609, 620, 630 only 2.5010-112 Metal dust box and 3 screws, use with 10-094 12.1037-016 Strike reinforcer, use with 10-094 10.60Price Book 72AEffective July 18, 2011 • Rev. 7/11B600-9

B600/700/800 • PartsDoor/Frame Reinforcements, Screws,Screw and Ball Bearing PacksA501-566JambMetalDustBox3˝ ScrewStrikeStudDoor/Frame ReinforcementsPartPriceNumber Description EachA501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings $13.10(2 required per lock)A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors; fits both 7/8" and 1" diameter housings 13.10(2 required per lock)37-016 Door frame strike reinforcer 10.60B520-622 Metal dust box reinforcer 10.60ScrewsDescriptionPrice EachPart Specify (Order in multiplesNumber Finish Size Type Application of 100)C603-256 • 12-24 x 1" PFH ANSI strike $0.70C603-897 • 8 x 3/4" combo Deadbolt and strike 0.74Screw and Ball Bearing PacksPart Specify PriceNumber Finish Door Thickness Contents EachKeylessB610-066 • Rose trim, B680 (2) Mounting screws $5.50Keyed, Single CylinderB610-049 1 3/8" – 2 1/2", B664 (2) Mounting screwsB610-050 1 3/8" – 2", B660, 661, 663 Mounting screwsB610-051 over 2" – 2 1/2", B660, 661, 663 (2) Ball bearings12.90B610-066 • Rose trim, B660, 661, 663 (2) Mounting screws 5.50Keyed, Double Cylinder (except Interchangeable Core)B610-053 1 3/8" – 2", B662P (2) Mounting screwsB610-055 over 2" – 2 1/2", B662P (2) Ball bearings12.90Keyed, Double Cylinder, Interchangeable CoreB610-054 1 5/8" – 2", B662R (2) Mounting screwsB610-056 over 2" – 2 1/2", B662R (2) Ball bearingsNote:1) Above screw packs are also used for B700 and B800-Series locks.12.90B600-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Torx ® Screw Packs, Special PartsParts • B600/700/800Screw Packs, Torx ®Part Specify PriceNumber Finish Door Thickness Contents EachKeylessB610-065 • Rose trim, B680 (2) Mounting screws (T-10) $6.50Keyed, Single CylinderB610-059 1 3/8" – 2 1/2", B664 (2) Mounting screws (T-30) $13.70B610-065 • Rose trim, B660, 661, 663 (2) Mounting screws (T-10) 6.50Keyed, Double Cylinder (except Interchangeable Core)B610-061 1 3/8" – 2", B662P (2) Mounting screws (T-30)B610-063 over 2" – 2 1/2", B662P (2) Ball bearingsKeyed, Double Cylinder, Interchangeable CoreB610-062 1 5/8" – 2", B662R (2) Mounting screws (T-30)$13.70B610-064 over 2" – 2 1/2", B662R (2) Ball bearings$13.70All FunctionsC203-311 • Deadbolt and strike (4) C503-766 (1) T-15 size Torx Bit8-32 x 1/2"C203-312 • Deadbolt and ANSI strike (2) C503-7668-32 x 1/2"(1) T-15 size Torx Bit $13.90(2) L583-371 (1) T-20 size Torx Bit12-24 x 1/2"Notes:1) Torx screw packs are furnished with appropriate T-xx installation tool(s).2) Above screw packs are also used for B700 and B800-Series locks.Special Parts⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Function Description EachXB11-916 B660P, B663P $97.70XB11-917 B662P 114.00XB11-918 B760P, B763P B860P, B863P Screw and tailpiece conversion kit for B600/ 97.70XB11-919 B762P, B862P 700/800-Series locks to fit doors Extended 114.00XB11-920 B660R, B660J, B660T, B663R, Equally (EE), over 2 1/2" – 4" thick. Specify 97.70B663J, B663T, B760R, B763R door thickness.XB11-921 B662R, B662J, B662T, B762R 114.00XB11-922 B660BD, B660GD, B660HD, Screw and tailpiece conversion kit for 97.70B663BD, B663GD, B663HD B600-Series locks to fit doors ExtendedXB11-923 B662BD, B662GD, B662HD Equally (EE), over 2" – 4" thick. Specify doorthickness.114.00Note:3) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11B600-11

B600/700/800NotesB600-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctionsDK-2Complete LocksDK-4OptionsDK-5Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . DK-5Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DK-5Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . . . DK-6Locks Less Components . . . . . . . . . . . . . . . DK-6Non-Standard Door Thickness . . . . . . . . . . DK-7Primus ® / Primus XP . . . . . . . . . . . . . . . . . . DK-7Tamper Resistant Torx ® Screws . . . . . . . . . DK-7Special Options . . . . . . . . . . . . . . . . . . . . . . DK-7PartsDK-8Knobs, Standard . . . . . . . . . . . . . . . . . . . . . DK-8Knobs and Related Parts,Interchangeable Core . . . . . . . . . . . . . . . . . DK-8Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DK-8Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . DK-9Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DK-9Accessories and Adapters . . . . . . . . . . . . . DK-10Backset Links and Reinforcements . . . . . . DK-10Electrified Lock Kits . . . . . . . . . . . . . . . . . . DK-10Miscellaneous Parts . . . . . . . . . . . . . . . . . . DK-11Plunger Units . . . . . . . . . . . . . . . . . . . . . . . DK-12Classroom Security FunctionConversion Kit . . . . . . . . . . . . . . . . . . . . . . DK-12Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . DK-13Screw Packs, Standard . . . . . . . . . . . . . . . DK-13Screw Packs, Torx ® . . . . . . . . . . . . . . . . . . DK-13Special Parts . . . . . . . . . . . . . . . . . . . . . . . DK-13Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationD 53 P DFinish Codesand DescriptionsD KnobsLatch SuffixD = DeadlatchS = SpringlatchCylinder SuffixP = 6-Pin CylinderL = Less 6-Pin CylinderC = Less 6-Pin Cylinder*R = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreFunctionLock Series* Used for double cylinder functions.CodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel643e (US 11) Aged BronzeStandard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throwStrike 1 1/4" x 4 7/8", ANSI, Square corner, no boxBackset 2 3/4"Cylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/8" – 2"Keys Two nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-1

D Knobs • FunctionsANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Non-Keyed LocksKeyed LocksSCHLAGEANSID10S F75 Passage LatchBoth knobs always unlocked.D25DExit LockBlank plate outside. Inside knobalways unlocked.D40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be openedfrom outside with small screwdriver.Turning inside knob or closing doorreleases button.D44SD170Hospital Privacy LockPush-button locking. Unlocked fromoutside by turning emergency turnbutton.Turning inside knob or closingdoor releases button.Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.SCHLAGEANSID53PD F109 Entrance LockTurn/push-button locking; pushingand turning button locks outside knob,requiring use of key until button ismanually unlocked. Push-buttonlocking; pushing button locks outsideknob until unlocked by key or byturning inside knob.D60PD F88 Vestibule/Classroom SecurityLockLatch retracted by key from outsidewhen outside knob is locked by key ininside knob. Inside knob is alwaysunlocked.D66PD F91 Store Lock*Key in either knob locks or unlocksboth knobs.D70PD F84 Classroom LockOutside knob locked and unlocked bykey. Inside knob always unlocked.D72PD F80 Communicating Lock*Key in either knob locks or unlockseach knob independently.D73PD F90 Corridor LockLocked or unlocked by key fromoutside. Push-button locking frominside. Turning inside knob or closingdoor releases button.D80PD F86 Storeroom LockOutside knob fixed. Entrance by keyonly. Inside knob always unlocked.D80PDELElectrically Locked (Fail Safe)Outside knob continuously lockedelectrically. Unlocked by key outsideor by switch or power failure.Auxiliary latch deadlocks latchboltwhen door is closed. Inside knobalways free for immediate exit.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.DK-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Functions • D KnobsANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Keyed LocksSCHLAGED80PDEUANSIElectrically Unlocked (FailSecure)Outside knob continuously lockeduntil unlocked by key or electriccurrent. Auxiliary latch deadlockslatchbolt when door is closed. Insideknob always free for immediate exit.D82PD F87 Institution Lock*Both knobs fixed. Entrance by key ineither knob.D85PD** F93 Faculty Restroom Lock(with Indicator Cylinder)Outside knob fixed. Entrance by keyonly. Push-button in inside knobactivates visual occupancy indicator,allowing only emergency masterkeyto operate. Turning inside knob orclosing door releases visualoccupancy indicator. Rotation ofinside spanner-button provides lockoutfeature by keeping indicatorthrown.** 85 function locks are not available in Full Size& Small Format Interchangeable Cores.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-3

D Knobs • Complete LocksD-KnobsOrbit (ORB) Plymouth (PLY) Tulip (TUL)D-KnobsKnob StylesPLY ORB TULFinishes626 605 613 626 605 613609 612 630 609 612625 643e 625 643e⧖Additional ⧖Additional⧖AdditionalLeadtime Leadtime LeadtimeFunction Description 606 629 606KeylessD10SPassageD25DExit$359 $371 $389 $389 $401 $419D40SPrivacyD44SPrivacy, hospital445 457 475 475 487 505D170 Single dummy 162 168 178 192 198 208Keyed, Single CylinderD53PD EntranceD70PD ClassroomD73PD Corridor$517 $529 $547 $547 $559 $577D80PD StoreroomD80PDEL* Electrically lockedD80PDEU* Electrically unlocked827 839 857 857 869 887*AC locks: 24V, 0.35 Amps. DC locks: 24V, 0.15 Amps, Intermittent or continuous duty.D85PD** Faculty Restroom 623 635 653 653 665 683** Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unless otherwise specified.Emergency keys must be ordered separately.Keyed, Double CylinderD60PD Vestibule/Classroom SecurityD66PD *** Store$619 $631 $649 $649 $661 $679D72PD CommunicatingD82PD *** Institution*** CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.Notes:1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) Split finish not available for ND25D.DK-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Latches, StrikesOptions • D Knobs14-019Standard43-005LatchesHsg Specify Add toBackset Description Dia Springlatch Deadlatch Lock Price2 3/8"Square corner, 1 1/8" x 2 1/4" — 14-047Square corner, 1" x 2 1/4" — 14-048 N/CSquare corner, 1 1/8" x 2 1/4", standard 14-001 14-0192 3/4" Anti-friction fire door latch 1" — 14-042 $137.00Square corner, 1 1/8" x 2 1/4", 3/4" throw3 3/4" Square corner, 1 1/8" x 2 1/4" 14-010 14-028 8.205" Backset extension link 43-005* 21.80* Must be used with 2 3/4" backset latches.Notes:1) Links installed in hollow metal doors require reinforcement. See D-Knobs Parts: Backset Links and Reinforcements.2) Links for backsets over 5" are sold as parts. See D-Knobs Parts: Special Parts.10-025Standard10-013 10-016StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4"1 1/8"10-013N/C1 1/2" $6.00Square corner, T-strike, deep box; used with fire door latch 1 1/8" 10-016 N/CANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10-025 N/CANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 10-025 11.10Box for ANSI strike, must be specified — K510-066 N/CNote: 3) Electric strike (10-042) is available as a part. See D-Knobs Parts: Strikes.Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-5

D Knobs • OptionsFull Size Interchangeable Core,Locks Less ComponentsOrbit (ORB)Full Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceExample: D53RD ORB $29.00Full size construction core** T suffix Add to Lock PriceExample: D53TD ORB 29.00Less full size core *** J suffix Deduct fromExample: D53JD ORB Lock Price26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details.*** Double cylinder functions are furnished with construction cores to preserve lock timing. Construction core handlingcharges are waived. Cores may be returned for credit. One control key is furnished at no charge. Locks are acknowledgedwith T suffix.Notes:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Full size interchangeable core is not available for Faculty Restroom function (D85).Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess each knob LLL for knob design $15.70Example: D53PD LLL/TUL x ORBLess each rose LLL for rose design 11.10Example: D53PD PLY x PLY/LLLLess standard cylinder, L suffix 50.00single cylinder functionsExample: D53LD TULLess standard cylinder, C suffix 100.00double cylinder functions only Example: D66CD PLYLess indicator cylinder L suffix 73.00Faculty Restroom function (D85) Example: D85LD ORBLess springlatch LLL for latch 19.20Example: D40S TUL 605 LLL 10-025Less deadlatch LLL for latch 25.40Example: D53PD ORB 626 LLL 10-025Less strike LLL for strike 3.60Example: D53PD PLY 612 14-019 LLLLock chassis only* Less all possible components Sum of all applicableExample: D53LD LLL 626 LLL LLLdeducts* Knob chassis furnished unless otherwise specified. Use PLY design for base price.DK-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Non-Standard Door Thickness, Primus ® ,Torx ® Screws, Special OptionsOptions • D KnobsNon-Standard Door ThicknessDescription Specify Add to Lock PriceExtended Inside (EI), over 2" – 4"RFQExtended Outside (EO), over 2" – 4"RFQExtended Equally (EE), over 2" – 2 1/2" Door thickness and how door is extended. $52.30Extended Equally (EE), over 2 1/2" – 6" Example: 3", EOExtended Inside (EI), over 2 1/2" – 6"RFQExtended Outside (EO), over 2 1/2" – 6"Extended Differently (ED), over 2" – 2 1/2" 244.00Extended Differently (ED), over 2 1/2" – 6"RFQNote:1) Locks are furnished extended equally (EE) unless otherwise specified.2) Beyond 2-1/2" please use the RFQ form on page iv.Primus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionSpecifyD-Series Knob single cylinder lock and Primus Lock less cylinder (use L suffix). Order Primus cylinder separately.cylinderSee CylindersExample: 1 ea. D53LD1 ea. 20-548D-Series Knob double cylinder lock and Primus Lock less cylinders (use C suffix). Order Primus cylinders separately.cylinderSee D Knobs: Complete Cylinders.Example: 1 ea. D82CD2 ea. 20-748D-Series Knob lock and Primus full sizeLock less full size core (use J suffix). Order Primus core(s) separately.interchangeable core cylinder(s)*See Cylinders: Interchangeable Core.Example: 1 ea. D80JD1 ea. 20-740* Double cylinder functions are furnished with construction cores to preserve lock timing. Construction core handling chargesare waived. Cores may be returned for credit. One control key is furnished at no charge. Locks are acknowledged with T suffix.Note:3) Primus is not available for Faculty Restroom function (D85).Tamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceLatch and strike screws Torx Screws $14.50Special Options⧖ Extended Factory Lead TimeNot subject to standard discount termsSpecifyDescription Lock Function “X” Number Add to Lock PriceD25x80. Blank plate outside, fixed knob inside. D25x80 XC03-543 $92.70Key in knob retracts latch.Added to D80D60 with closed outside knob. D60 XC03-928 N/CD70x80. Key locks or unlocks outside knob. Key D70x80 XC07-960 47.00in fixed inside knob retracts latch.Added to D82D25x70. Blank plate outside. Key locks or D25x70 XC11-577 92.70unlocks inside knob.Added to D70Note:4) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-7

D Knobs • PartsKnobs, StandardKnobs; Knobs and Related Parts,Interchangeable Core; RosesDesigns and FinishesORB PLY TUL605 605 605Part 612 613 612 613 612Number Description 626 625 630 626 625 630 626 625 61304-006 Closed knob $72.60 $74.60 $76.60 $72.60 $74.60 $76.60 $72.60 $74.60 $76.6004-007 Open knob or Cylinder knobC503-403 — — — 7.80 7.80 7.80 — — —C503-746 Cylinder sleeve — — — — — — — — 7.80C503-940 — — 7.80 — — — — — —C603-262 7.80 7.80 — — — — 7.80 7.80 —Knobs and Related Parts, Interchangeable CoreDesigns and FinishesORB605Part 612 613Number Description 626 626 63004-030 Full size core knob, driver, retainer $59.80 $61.80 $63.80(converts PD to JD)04-031 Full size core knob 50.70 52.70 54.7004-034* Full size core knob, core, driver, and retainer 112.00 114.00 116.00(converts PD to RD)04-033** Full size core driver and retainer 9.10C603-569** Full size core retainer 3.10C604-333** Full size core driver, universal 6.10* Furnished 1-bitted with two 6-pin keys unless otherwise specified.** Design and finish not required.Note:1) Locks manufactured prior to March 1992 require installation of universal driverin chassis to accommodate Primus ® cores.RosesDesigns and FinishesTUL(Use for ORB) PLY605Part 612 613Number Description 626 625 63004-001 Outside rose04-002 Inside rose$66.90 $68.90 $70.90DK-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Latches, StrikesParts • D Knobs14-00114-019LatchesPart Number Specify Hsg PriceSpringlatch Deadlatch Finish Backset Description Dia Each— 14-047 •2 3/8"Square corner, 1 1/8" x 2 1/4"$77.60— 14-048 • Square corner, 1" x 2 1/4"14-001 14-019 • Square corner, 1 1/8" x 2 1/4", standard59.601"— 14-0422 3/4" Anti-friction Fire Door Latch•237.00Square corner, 1 1/8" x 2 1/4", 3/4" Throw14-010 14-028 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 71.5039-030* • — Rabbeted latch and strike kit, 605 and 626 only — 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-025 10-01310-016 10-042StrikesPart Specify PriceNumber Finish Description Lip Length Each10-013* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" $7.701 1/2" 10.7010-016 • Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8" 15.80Use with fire door latch10-025*•ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 11.2010-025 ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 30.00K510-066 Box for ANSI strike — 4.9010-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 193.00* Specify lip length.Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-9

D Knobs • PartsAccessories & Adapters,Backset Links & Reinforcements, Electrified Lock Kits04-032Accessories and AdaptersPart Specify PriceNumber Finish Description Each04-032 Retrofit lever, plastic, fits on ORB, PLY and TUL knobs $21.6038-018 • Thin door extension ring (2 required per lock) 8.70F506-868 Latch front adapter (use with 1" faceplate in 1 1/8" door prep) Order inmultiples of 1000.52G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 5.1037-001 43-005 G506-815Backset Links and ReinforcementsPartPriceNumber Description Each37-001* Metal door reinforcer kit, fits both 7/8" and 1" diameter housings $26.0043-005** 5" Backset extension link 21.00A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors; fits both 7/8" and 1" diameter housings 13.10A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors; fits both 7/8" and 1" diameter housings 13.10A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold 8.10latch in metal doors; fits both 7/8" and 1" diameter housingsG506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 5.10* Specify door thickness, includes A501-567 and A501-565 or A501-566.** Must be used with 2 3/4" backset latches.Notes:1) Backsets 5" and longer require extension links. D-Series locks with long backsets are furnished with 1 1/8" faceplatesand 1" housings. For backsets over 5", see Special Parts.2) Links installed in metal doors require reinforcement.Electrified Lock KitsPartPriceNumber Description Each38-064 Solenoid and rectifier, EL38-065 Solenoid and rectifier, EU$289.00Note:3) AC locks: 24V, 0.35 Amps. DC locks: 24V, 0.15 Amps. Intermittent or continuous duty.DK-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous PartsParts • D KnobsMiscellaneous PartsPart Specify PriceNumber Finish Description EachA501-167 Threaded rod for mounting D170s as double dummy set $11.10C100-059 Spindle unit, out and ins - D66 111.00C100-062 Spindle unit, out - D70, out and ins - D72 111.00C102-522 • Hub and cap, out (except D80, D80 EL/EU, D82, D85) 66.10C102-524 • Hub and cap, ins (except D82) 49.50C102-540 Hub and frame - D25 37.40C102-541 • Hub and cap, ins - D170 36.20C102-542 • Hub and cap, out - D80 EL/EU 66.10C102-570 • Hub and cap, out - D80, D82, D85 105.00C102-572 • Hub and cap, ins - D82 105.00C102-837 Locking plug, out - D73 53.40C102-840 Key spindle - D40, D44, D53, D60 46.30C203-034 Spindle and catch, ins (except D60, D66, D72, D80EL/EU, D82) 45.80C203-376 Plug - D85 11.90C203-390 Spindle and key cam, out - D70, D72 46.30C203-391 Spindle and key cam - D60 46.30C203-411 Key spindle and spring - D85 37.90C203-733 Locking plug - D70, D72 37.90C203-858 Spindle and hammer, ins - D85 46.30C203-947 Spindle and catch, out - D40, D44 37.90C203-948 Spindle and catch, out - D53, D60, D73, D80 37.90C303-006 Slide and roller 43.90C303-400 Spindle and catch, ins - D80EL/EU 41.30C303-439 AC Rectifier 48.60C503-008 Cotter pin Order inmultiples of 1000.44C503-019 Slide spring 4.70C503-308 Anchor spring (except D25, D170) 5.00C503-314 Slide spring seat 5.10C503-324 Spindle washer - D60, D70, D72, D85 5.00C503-334 Plunger hammer - D85 10.80C503-335 Plunger hammer spring - D85 4.90C503-339 Key spindle - D80, D82, D85 20.00C503-359 Key cam - D60 10.90C503-360 Key cam rider - D60 11.20C503-361 Key cam pin - D60 4.90C503-362 Plunger - D60 5.10C503-368 Key cam sleeve, out - D70, D72 4.90Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-11

D Knobs • PartsMiscellaneous Parts (continued), Plunger Units,Classroom Security Function Conversion KitMiscellaneous Parts (contʼd)Part Specify PriceNumber Finish Description EachC503-371 Plunger - D66 $5.10C503-400 Key cam pin - D70, D72 4.90C503-737 Slide spring - CRO, ELL, YOR designs 5.10C503-775 • Blank rose, out - D25 33.40C503-768 Spacer - D80 EL/EU 2.40C503-965 Plunger sleeve, out - D40, D44 11.00C603-500 Housing 10.80C604-187 Slide catch, restoring - D40, D44, D73, D85 5.20C604-188 Slide catch, non-restoring - D53 5.20C604-191 Slide catch spring - D40, D44, D53, D73, D85 4.90C604-204 Spindle, keyed - D80 EL/EU 20.00C604-205 Solenoid retaining clip - D80 EL/EU 6.30C604-273 Rose pin - D25 1.10C604-312 Anchor (except D25) 5.10Plunger UnitsPartPriceNumber Description Each04-020 Plunger, ins - D40, D44 $58.7004-021 Plunger unit, out - D40 46.4004-022 Plunger unit, out - D44 57.6004-023 Plunger unit, ins - D53 46.3004-025 Plunger unit, ins - D73 46.3004-026 Plunger unit, ins - D85 106.00Note: 1) Specify finish and dimension for all plunger units.See Dimension Chart for dimension required.Example: 04-022 626 Dim = 195Outside plunger unit for D44 ORB 626,over 2" – 2 1/2" door, EEDimension Chart: Plunger UnitsPartNumber Door Range Dim04-0201 3/8" – 2" 443over 2" – 2 1/2", EE 46804-021 1 3/8" – 2" 17004-022 over 2" – 2 1/2", EE 19504-023 1 3/8" – 2" 44304-02504-026over 2" – 2 1/2", EE 468Classroom Security Function Conversion KitPartPriceNumber Converts Contents Conversion Instructions Each38-076 D70PD (1) Chassis Replace existing chassis. $233.00to (1) 23-001 Cylinder Replace existing inside knob.D60PD (1) 04-007 Knob Add cylinder to inside.Notes:2) Specify design, finish and keying.3) Subject to same discount as D-Series Locks.4) Schlage recommends using this kit and does not endorse converting existing locks by replacing parts in the chassis.DK-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Screws, Standard Screw Packs,Torx ® Screw Packs, Special PartsParts • D KnobsScrewsPrice Each(Order inPart Specify multiplesNumber Finish Description Door Thickness Type Size of 100)A501-171 • D170, washer — Washer — $0.74A501-746 • D170, mounting screw 1 1/2" – 2" POH Machine 1/4" 20 x 2 1/2" 0.74C603-256 • ANSI strike — PFH Combo 12-24 x 1" 0.66C603-897 • Latch and strike — PFH Combo #8 x 3/4" 0.74Screw Packs, StandardPart Specify PriceNumber Finish Description Contents EachB202-517 • Latch and strike (4) C603-897 $5.40C303-007 • Mounting, D170 (1) A501-171 6.50(1) A501-746(3) C603-897C203-736 • ANSI strike (2) C603-256 4.30C303-028 • Mounting, all except D170 (4) C603-897 8.00(2) C603-256Screw Packs, Torx ®Part Specify PriceNumber Finish Description Contents EachC203-311 • Latch and strike (4) C503-766 (T-15) $13.90C203-312 • Latch and ANSI strike (2) C503-766 (T-15) 13.90(2) L583-371 (T-20)Note: 1) Torx screw packs are furnished with appropriate T-xx installation tool(s).Special Parts⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Description EachXC03-069 Extension links, backsets over 5" – 42" $373.00XQ02-309* • 10-013 Strike, 7/8" flat lip 19.70XQ03-494* •10-013 Strike, 1 5/8" – 6" lip 83.2010-013 Strike, 6 1/8" – 12" lip 106.00XQ07-351* •10-025 Strike, 7/8" flat lip 19.7010-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8", 1 1/2") 95.30* Specify lip length.Note: 2) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11DK-13

D Knobs • PartsNotesDK-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctionsND-2Complete LocksND-5OptionsND-6Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-6Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-6Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . . ND-7Small Format Interchangeable CoreSmall Format Construction Core . . . . . . . . . ND-7Competitive Cores . . . . . . . . . . . . . . . . . . . .ND-8Locks Less Components . . . . . . . . . . . . . . . ND-9Non-Standard Door Thickness . . . . . . . . . . ND-9Primus ® / Primus XP . . . . . . . . . . . . . . . . . ND-10Tactile Warning . . . . . . . . . . . . . . . . . . . . . ND-10Tamper Resistant Torx ® Screws . . . . . . . . ND-10Special Options . . . . . . . . . . . . . . . . . . . . . ND-11Request to Exit . . . . . . . . . . . . . . . . . . . . . ND-11PartsND-12Levers and Related Parts . . . . . . . . . . . . . .ND-12Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-12Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-13Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-13Reinforcements . . . . . . . . . . . . . . . . . . . . . ND-14Miscellaneous Parts . . . . . . . . . . . . . . . . . ND-14Miscellaneous Parts . . . . . . . . . . . . . . . . . ND-15Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-16Screw Packs, Standard . . . . . . . . . . . . . . . ND-16Screw Packs, Torx ® . . . . . . . . . . . . . . . . . . ND-16Special Parts . . . . . . . . . . . . . . . . . . . . . . ND-16Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationND 53 P DND LeversLatch SuffixD = DeadlatchS = SpringlatchCylinder SuffixP = 6-Pin CylinderL = Less 6-Pin CylinderC = Less 6-Pin Cylinder*R = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreB = Less SFICBDC = Disposable SFICG = Everest ® Patented SFICH = Construction SFICFunctionLock SeriesSFIC = Small Format (Best ® Style) Interchangeable Core* Used for double cylinder functions.Finish Codesand DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chrome626AMAntimicrobial Coatingon Satin Chromium643e (US 11) Aged BronzeStandard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throwStrike 1/4" x 4 7/8", ANSI, Square corner, no boxBackset 2 3/4"Cylinder**** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 5/8" – 2 1/8" ***Keys Two nickel silver cut keys per lock, 6-pin, C123 section**BAA/ARRA For a list of available BAA/ARRA compliant products please contact your local SSC or salesrepresentative to see the Ingersoll Rand Security Technologies BAA/ARRA catalog.* Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** 1 3/4" – 2" for ND85**** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-1

ND Levers • FunctionsANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Non-Keyed LocksSCHLAGEANSIND10S F75 Passage LatchBoth levers always unlocked.Inside lever is always free forimmediate egress.Keyed LocksSCHLAGE ANSIND50PD F82 Entrance/Office Lock †Push-button locking. Push-buttonlocks outside lever until unlocked withkey or by turning inside lever. Inside leveris always free for immediate egress.ND12D F89 Exit LockOutside lever always fixed. Insidelever always unlocked. Inside lever isalways free for immediate egress. Alsoavailable with Request to Exit (RX)function.ND12DELElectrically Locked (Fail Safe)Outside lever continuously lockedelectrically. Unlocked by switch or powerfailure. Auxiliary latch deadlocks latchboltwhen door is closed. Inside lever alwaysfree for immediate exit. Inside lever isalways free for immediate egress. Also availablewith Request to Exit (RX) functionND53PD F109 Entrance Lock †Turn/push-button locking; pushing and turningbutton locks outside lever, requiring use ofkey until button is manually unlocked. Pushbuttonlocking; pushing button locks outsidelever until unlocked by key or by turninginside lever. Inside lever is always free forimmediate egress.ND60PD F88 Vestibule Lock †Latch retracted by key from outsidewhen outside lever is locked by key ininside lever. Inside lever is alwaysunlocked. Inside lever is always free forimmediate egress.ND12DEUND25DElectrically Unlocked (Fail Secure)Outside lever continuously lockeduntil unlocked by electric current.Auxiliary latch deadlocks latchbolt whendoor is closed. Inside lever always free forimmediate exit. Inside lever is always freefor immediate egress. Also available withRequest to Exit (RX) functionExit LockBlank plate outside. Inside leveralways unlocked. Inside lever is alwaysfree for immediate egress.ND66PD F91 Store Lock † *Key in either lever locks or unlocksboth levers.ND70PD F84 Classroom Lock †Outside lever locked and unlocked bykey. Inside lever always unlocked. Insidelever is always free for immediate egress.ND40S F76 Bath/Bedroom Privacy LockPush-button locking. Can be openedfrom outside with small screwdriver.Turning inside lever or closing doorreleases button. Inside lever is alwaysfree for immediate egress.ND44SHospital Privacy LockPush-button locking. Unlockedfrom outside by turning emergencyturn-button. Turning inside lever orclosing door releases button. Inside leveris always free for immediate egress.ND73PD F90 Corridor Lock †Locked or unlocked by key from outside.Push-button locking from inside. Turninginside lever or closing door releases button.When outside lever is locked by key it canonly be unlocked by key. Inside lever isalways unlocked. Inside lever is always freefor immediate egress.ND75PD F110 Classroom Security Lock †Key in either lever locks or unlocksoutside lever. Inside lever is alwaysunlocked. Inside lever is always free forimmediate egress.ND170Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.† Keyed functions available with 6-pin (PD/LD),SFIC(GD/BD), or FSIC(RD/JD) cylinder.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.Safe School LocksND-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

ANSI/BHMA Certified A156.2-2003, Series 4000,Grade 1, UL Listed for 3-hour fire door.Keyed Locks SCHLAGE ANSIFunctions • ND LeversVandlgard Functions: Designed to disengage outside spindlefrom latch when in locked condition.Inside lever is always free forimmediate egress.SCHLAGEANSIND80PD F86 Storeroom Lock †Outside lever fixed. Entrance by key only.Inside lever always unlocked. Inside leveris always free for immediate egress.Also available with Request to Exit (RX)functionND80PDEL Electrically Locked (Fail Safe) †Outside lever continuously lockedelectrically. Unlocked by key outsideor by switch or power failure.Auxiliary latch deadlocks latchboltwhen door is closed. Inside leveralways free for immediate exit. Insidelever is always free for immediateegress. Also available with Request toExit (RX) functionND80PDEUElectrically Unlocked (FailSecure) †Outside lever continuously lockeduntil unlocked by key or electriccurrent. Auxiliary latch deadlockslatchbolt when door is closed. Insidelever always free for immediate exit.Inside lever is always free for immediateegress. Also available with Requestto Exit (RX) functionND82PD F87 Institution Lock † *Both levers fixed. Entrance by key ineither lever.ND85PD F93 Faculty Restroom Lock **Outside lever fixed. Entrance by keyonly. Push-button in inside leveractivates visual “occupancy” indicator,allowing only emergency master key tooperate. Turning inside lever or closingdoor releases visual occupancy indicator.Rotation of inside spinner-buttonprovides lock-out feature by keepingindicator thrown. Inside lever is alwaysfree for immediate egress.Safe School Locks† Keyed functions available with 6-pin (PD/LD),SFIC(GD/BD), or FSIC(RD/JD) cylinders.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.** 85 function locks are not available in Full Size& Small Format Interchangeable Cores.ND91PD F82 Entrance/Office Lock †Push-button locking. Push-buttondisengages outside lever untilunlockedwith key or by turning inside lever.ND92PD F109 Entrance Lock †Turn/push-button locking; pushing andturning button disengages outside lever,requiring use of key until button ismanually unlocked. Push-button locking;pushing button disengages outside leveruntil unlocked by key or by turninginside lever.ND93PD F88 Vestibule Lock †Latch retracted by key from outside whenoutside lever is disengaged by key ininside lever. Inside lever is alwaysunlocked.ND94PD F84 Classroom Lock †Outside lever disengaged and unlockedby key. Inside lever always unlocked.ND95PD F110 Classroom Security Lock †Key in either lever locks or unlocksoutside lever. Inside lever is alwaysunlocked.ND96PD F86 Storeroom Lock †Outside lever always disengaged. Entranceby key only. Inside lever always unlocked.ND96PDEL Electrically Locked (Fail Safe) †Outside lever continuouslydisengaged electrically. Unlocked by keyoutside or by switch or power failure.Auxiliary latch deadlocks latchbolt whendoor is closed. Inside lever always free forimmediate exit.ND96PDEUElectrically Unlocked(Fail Secure) †Outside lever continuously disengageduntil unlocked by key or electric current.Auxiliary latch deadlocks latchbolt whendoor is closed. Inside lever always free forimmediate exit.ND97PD F90 Corridor Lock †Locked or unlocked by key from outside.Push-button locking from inside. Turninginside lever or closing door releasesbutton. When outside lever is locked bykey it can only be unlocked by key. Insidelever is always unlocked.Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-3

ND Levers • FunctionsSpecialty FunctionsANSI/BHMA Certified A156.2-2003, Series 4000, Grade 1, UL Listed for 3-hour fire door.Pricing for all Speciality functions can be found on ND-11Non-Keyed LocksSCHLAGEANSIND30DPatio LockPush button locking. Turning insidelever or closing door releases button,preventing a lock-out. Inside leveralways free for immediate egress.Specify per XN12-007.ND45Time Out LockCaretaker SidePushing and holding button will lockinside lever (detention side) untilreleased. Lever always retracts latch.Detention SideLever retracts latch unless outside buttonis depressed. Vandlgard allowsinside spindle to disengage from latchwhen locked.Keyed LocksSCHLAGEANSIND25 x 80PDStoreroom Exit LockBlank plate outside. Key in fixed inside leverretracts latch. Specify per XN12-005.ND70 x 80PD Classroom by Storeroom LockKey locks and unlocks outside lever.Key in fixed inside lever retracts latch.Specify per XN12-006.ND25 x 70PDClassroom Exit LockBlank plate outside. Key locks or unlocksinside lever. Specify per XN12-004.ND72PDCommunicating LockKey in either lever locks andunlocks own lever. Specify perXN12-002.ND60PDVestibule with Closed Outside LeverSame as ND60 except outside lever is closed.Inside lever always free for immediate egress.Specify per XN12-001.Keyed LocksSCHLAGEANSIVandlgard Functions: Designed to disengage outside spindlefrom latch when in locked condition.Inside lever is always free forimmediate egress.ND72PDVandlgard Communicating LockCommunicating, ND72, lock withVandlgard. Key in either lever locksand unlocks own lever. Both insideand outside levers are clutching.Specify per XN12-003.ND-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

ND-LeversComplete Locks • ND LeversAthens (ATH) Omega (OME) Sparta (SPA) Rhodes (RHO)Tubular (TLR)ND LeversDesigns and FinishesATH OME RHO SPA TLR626 605 606 613612 619Function Description 625 643eKeylessND10S PassageND12DExit, lever x lever$339 $351 $369ND12D EL or EU* Electrically locked or unlocked 528 540 558*AC locks: use 24V, 0.35 Amps. DC locks: use 24V, 0.15 Amps. Intermittent or continuous duty.ND25D Exit, blank plate x lever 339 351 369ND40S PrivacyND44SPrivacy, hospital391 403 421ND170 Single dummy 146 152 162Keyed, Single CylinderND50PDEntrance/OfficeND53PDEntranceND70PD Classroom $463 $475 $493ND73PDCorridorND80PDStoreroomND85PD** Faculty Restroom Lock** Emergency keys must be ordered separately.561 573 591ND91PDVandlgard ® Entrance/OfficeND92PDVandlgard ® EntranceND94PD Vandlgard ® Classroom 505 517 535ND96PDVandlgard ® StoreroomND97PDVandlgard ® CorridorND80PD EL or EU* Electrically locked or unlocked 619 631 649ND96PD EL or EU* Vandlgard ® Electrically locked or unlocked*AC locks: use 24V, 0.35 Amps. DC locks: use 24V, 0.15 Amps. Intermittent or continuous duty.679 691 709Keyed, Double CylinderND60PDVestibuleND66PD*StoreND75PD Classroom Security $550 $562 $580ND82PD*InstitutionND93PDVandlgard ® Vestibule Classroom SecurityND95PDVandlgard ® Classroom Security593 605 623* CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.Notes:1) Split designs and/or finishes are available. Split finishes are priced at the highest finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) For ND30, ND72 and other special functions pricing, see page ND-11.5) Split finish not available for ND25DPrice Book 72AEffective July 18, 2011 • Rev. 7/11ND-5

ND Levers • OptionsLatches, Strikes13-048Standard13-047Standard43-005LatchesHsg Specify Add toBackset Description Dia Springlatch Deadlatch Lock Price2 3/8" Square corner, 1 1/8" x 2 1/4" – 14-047 N/CSquare corner, 1 x 2 1/4" – 14-048 N/C2 3/4" Square corner, 1 1/8" x 2 1/4", standard 1" 13-048 13-047 N/C2 3/4" Anti-friction fire door latch1"Square corner, 1 1/8" x 2 1/4", 3/4" throw– 14-042 $137.003 3/4" Square corner, 1 1/8" x 2 1/4" 14-010 14-028 8.205" Backset extension link 43-005 21.80Notes:1) ND-Series backset links must be used with 2 3/4" backset latches.2) Backset links require reinforcement when used in hollow metal doors. See ND-Levers Parts: Accessories.3) Backset links over 5" are sold as parts. See ND-levers Parts: Special Parts.4) All ND-Series latches require reinforcement when used on hollow metal doors. See ND-levers Parts: Accessories.10-025Standard10-013 10-016StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4"1 1/8"10-013N/C1 1/2" $6.00Square corner, T-strike, deep box, fire door latch 1 1/8" 10-016 N/CANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 10-025 N/CANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 10-025 11.10Box for ANSI strike, must be specified — K510-066 N/CNote:5) Electric strike (10-042) is available as a part.6) Strikes with long lip lengths are sold as parts. See ND Parts: Special Parts.Shaded items are standard components and arefurnished with locks unless otherwise specified.ND-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeable CoreSmall Format Interchangeable CoreOptions • ND LeversAthens (ATH)Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR)Full Size Interchangeable CoreFull Size Construction Core(ND85 not available with these options)Lever StylesATH RHO SPA OME TLRFinishes626 605 606 612 619625 643e 613Description Specify Price (per core)Full size core* R suffix Add to Lock PriceExample: ND53RD RHO $29.00Full size construction core** T suffix Add to Lock PriceExample: ND53TD ATH 29.00Less full size core J suffix Deduct fromExample: ND53JD ATHLock Price26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details.Athens (ATH) Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR)Small Format Interchangeable CoreSmall Format Construction Core(ND85 not available with these options)Lever StylesATH RHO SPA OME TLRFinishes626 605 606 612 619625 643e 613Description Specify Price (per core)Everest ® patented core* G Suffix $62.00Example: ND53GD RHOSmall format construction core** H Suffix 34.00Example: ND53HD RHOLess small format core B Suffix N/CExample: ND53BD RHOSmall format disposable core BDC Suffix N/CExample: ND53BDC RHO* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys and Keying for details.Note:1) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying.Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-7

ND Levers • OptionsCompetitor Core CompatiblityCompetitor Core CompatibilityLever StylesATH RHO SPA TLRFinishes626 613⧖ Additional Leadtime605 606 612 619 625 643eDescription Specify Deduct from Lock PriceSargent Key in lever (similar to the one LD-SAR suffix $50.00used in 10L & 11L, etc)Example: ND53LD-SAR RHOSargent Full Size Removable Core JD-SAR suffix 26.00Example: ND53JD-SAR ATHCorbin Russwin Full Size removable Core JD-CO6 suffix 26.00(6 pins) Example: ND53JD-CO6 SPAYale Full Size removable core (6 pins) JD-YA6 sufix 26.00or Medeco 31*0100 FSIC typeExample: ND53JD-YA6 TLRND-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Locks Less Components,Non-Standard Door ThicknessOptions • ND LeversLocks Less ComponentsDeduct fromDescription Specify Lock PriceLess each lever LLL for lever design $18.20Example: ND53PD LLL/RHO x ATHLess each rose LLL for rose design 10.30Example: ND53PD RHO x RHO/LLLLess standard cylinder, single cylinder functions L suffix 50.00Example: ND53LD SPALess standard cylinder, double cylinder functions C suffix 100.00Example: ND66CD ATHLess indicator cylinder L suffix 73.00Faculty restroom function (ND85)Example: ND85LD RHOLess springlatch LLL for latch 19.20Example: ND40S RHO 605 LLL 10-025Less deadlatch LLL for latch 25.40Example: ND53PD SPA 626 LLL 10-025Less strike LLL for strike 3.60Example: ND53PD ATH 612 13-047 LLLLock chassis and spring cages only Less all possible components Sum of all applicableExample: ND53LD LLL 626 LLL LLL, lever chassis deductsNon-Standard Door ThicknessDescription Specify Add to Lock Price1 3/8" thick doors* $46.10Extended Inside (EI), over 2" – 6" Door thickness and how door is extended. 237.00Extended Outside (EO), over 2" – 6" Example: 3", EO 237.00Extended Equally (EE), over 2 1/8" – 6" 389.00Extended Differently (ED), over 2" – 6" 389.00* To retrofit existing locks, 2 chassis spacers (XN12-012) are required. See ND-16.Notes: 1) For ND85, EE range is from over 2" to 6". EI, EO, and ED ranges are from over 1 7/8" to 6".2) Control keys are not furnished with locks and must be ordered separately. See Keys and Keying.3) Locks are furnished extended equally (EE) unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-9

ND Levers • OptionsPrimus ® / Primus XP, Tactile Warning,Tamper Resistant Torx ® ScrewsPrimus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionSpecifyND-Series Lever single cylinder lock and Lock less cylinder (use L suffix). Order Primus cylinder separately.Primus cylinderSee CylindersExample: 1 ea. ND91LD1 ea. 20-765ND-Series Lever double cylinder lock and Lock less cylinders (use C suffix). Order Primus cylinders separately.Primus cylinderSee D Levers: Complete Cylinders.Example: 1 ea. ND82CD2 ea. 20-565ND-Series Lever lock and Primus full size Lock less full size core (use J suffix). Order Primus core(s) separately.interchangeable core cylinder(s)*See Cylinders: Interchangeable Core.Example: 1 ea. ND73JD1 ea. 20-740Tamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceLatch and strike screws Torx Screws $13.90Tactile Warning (knurling)(RHO lever shown)Tactile WarningTactile WarningAdd to Lock PriceDescription Specify (per lever)Preface design code 8AT for Athens,8RO For Rhodes, trim 8SP for Sparta $35.60(Not available on Omega )Notes:1) Tactile warning is applied to outside ever only unless otherwise specified.2) 643e finish is not available for tactile offeringsXN12-035Engraved Rose (word “LOCK” engraved on inside rose)PartNumber Description Add to Lock PriceXN12-035* Engraved “LOCK” on inside rose (Rhodes) $26.30XN12-045* Engraved “LOCK” on inside rose (Omega) 26.30* Available in 626 on the inside of a double cylinder function. Available on ND60, ND75 and ND95ND-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Special Options,Request to ExitOptions • ND LeversSpecial Functions⧖ Extended Factory Lead TimeNot subject to standard discount termsSpecifyAdd toDescription Lock Function “X” Number Lock PriceND25x80. Blank plate outside, fixed lever inside. Key in lever ND25x80 XN12-005 add $92.70 toretracts latch.ND80ND60 with closed outside lever. ND60 XN12-001 N/CND70x80. Key locks or unlocks outside lever. Key in fixed inside ND70x80 XN12-006 add 48.60 tolever retracts latch.ND82ND25x70. Blank plate outside. Key locks or unlocks inside lever. ND25x70 XN12-004 add 92.70 toND70ND72. Double cylinder communicating lock. ND72 XN12-002 add 130.00 toND70ND30D. Patio lock. ND30D XN12-007 add 130.00 toND40SND72 with Vandlgard ® . (Clutching levers on inside and ND72 Vandlgard ® XN12-003 add 130.00 tooutside levers.)ND94ND45 - Time out lock ND45 XN12-317 add 50.00 toND91LDNotes:1) All above functions are available in standard cylinder, full-size interchangeable core or small formatinterchangeable cylinders. See page ND-4.Antimicrobial Coating⧖ Extended Factory Lead TimeFinish: 626Description of Components Coated Add to Lock PriceInside and Outside Lever and Rose Trim $27.00Ordering notes for Antimicrobial Coatings:1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 daysfor manufacturing.2) Please specify 626AM on each line item requiring antimicrobial coating.3) For ease of identification, a sticker will be applied to a non-visible location on product.4) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Request to Exit (RX) FeatureDescription Specify Add to Lock PriceRequest to Exit Feature (Available on the ND80, ND12 and ND96 families)Ready to be used in a Normally Open or Normally N123-062 $152.00Closed application.Lead LiningDescription Specify Add to Lock PriceLead Lining XN12-307 $208.00Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-11

ND Levers • PartsLock Trim: Levers,Levers and Related Parts, RosesLevers and Related Parts, StandardDesigns and FinishesATH OME RHO SPA TLR626 605 606 613Part 612 619Number Description 625 643e03-030 Closed lever03-031 Open lever $88.50 $90.50 $92.5003-032 Full size core leverN523-127* Full size core driver, universal 1.90 1.90 1.9003-000 Small format core lever, all functions 88.50 90.50 92.50N523-091* Small format core driver 8.9009-774* Small format core driver and spacer 9.90D500-000** Small format core spacer 1.00* Design and finish not required.** 1 spacer required for 6-pin, no spacer required for 7-pin.Note: 1) To convert locks from full size to small format, components are required in addition to small format core leversand drivers.RosesDesigns and Finishes626 605 606 613Part 612 619Number Description 625 643e03-042 Outside or inside rose $66.90 $68.90 $70.90N523-002 Blank plate, ND25 64.20 66.20 68.20XN12-035* Word “LOCK” engraved on inside rose (Rhodes) 82.90XN12-045* Word “LOCK” engraved on inside rose (Omega) 82.90* Available in 626 on the inside of a double cylinder function. Available on ND60, ND75 and ND95ND-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Latches, StrikesParts • ND Levers13-048 13-047LatchesPart Number Specify Hsg PriceSpringlatch Deadlatch Finish Backset Description Dia Each— 14-047 •2 3/8"Square corner, 1 1/8" x 2 1/4"— 14-048 • Square corner, 1" x 2 1/4"$77.6013-048 13-047 • Square corner, 1 1/8" x 2 1/4", standard 59.60— 14-042 • 2 3/4" Anti-friction Fire Door Latch 1"Square corner, 1 1/8" x 2 1/4", 3/4" Throw237.0014-010 14-028 • 3 3/4" Square corner, 1 1/8" x 2 1/4" 71.50— 43-005 • 5" Backset extension link 21.0039-030* • — Rabbeted latch and strike kit, 605 and 626 only — 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.10-025 10-013 10-016StrikesPart Specify PriceNumber Finish Description Lip Length Each10-013* • Square corner, T-strike, box, 1 1/8" x 2 3/4"* Specify lip length.1 1/8" $7.701 1/2" 10.8010-016 • Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8" 15.80Use with fire door latch10-025* • ANSI, no box, 1 1/4" x 4 7/8", standard 1 3/16" 11.3010-025* • ANSI, no box, 1 1/4" x 4 7/8" 1 3/8", 1 1/2" 30.00K510-066 Box for ANSI strike — 4.9010-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 193.00Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-13

ND Levers • PartsReinforcements, Plunger PartsReinforcements — Must be used for hollow metal doorsPartPriceNumber Description Each37-001* Metal door reinforcer kit, fits both 7/8" and 1" diameter housings $26.00A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors.Fits both 7/8" and 1" diameter housings.A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors.13.10Fits both 7/8" and 1" diameter housings.* Specify door thickness, includes A501-567 and A501-565 or A501-566.Plunger PartsPart Specify PriceNumber Finish Description EachN123-017 Push and Turn Plunger Bar (ND53, ND85, ND92) $8.20N123-028 Push Button Plunger Bar (ND30, ND40, ND44 inside, ND50, ND73, ND91, ND97) 44.50N123-034 • Emergency Button and Plunger (ND40 outside) 46.00N123-035 • Emergency Turn Button and Plunger (ND44 outside) 86.20N523-000 • Push Button (ND30, ND40, ND44 inside, ND50, ND73, ND91, ND97) 6.50N523-001 • Push and Turn Button (ND53, ND92) 12.30N523-124 • Push Button w/Spanner Access (ND85) 7.20Competitor Core Compatability PartsPartPriceNumber Description EachN123-064 Outside spring cage for Sargent key in lever $208.0003-044 Open lever for Sargent key in lever03-055 Open lever for Yale full size removable core (6 pins)03-066 Open lever for Corbin Russwin full size removable core (6 pins)167.0003-077 Open lever for Sargent full size removable coreN123-065 Outside spring cage for Yale (6 pins)full size removable coreN123-066 Outside spring cage for Corbin-Russwin (6 pins) or Sargent full size removable coreN123-067 Inside spring cage for Sargent key in lever 208.00N123-068 Inside spring cage for Yale (6 pins) full size removable coreN123-069 Inside spring cage for Corbin-Russwin (6 pins) or Sargent full size removable coreN523-146 Tail piece for Sargent key in lever (not available in Omega design) 1.80N523-147 Tail piece for Yale FSIC (not available in Omega design) 15.80N523-148 Tail piece for Sargent and Corbin FSIC (not available in Omega design)XN12-292 Tail piece for use with Sargent XC SFIC8.50ND-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous PartsParts • ND LeversMiscellaneous PartsPartNumber DescriptionPriceEachKeycam AssembliesN123-024 Electrified Keycam Assembly ND12EL/EU and ND80EL/EU $22.10N123-025 Electrified Keycam Assembly ND96EL/EU 23.30N123-045 Keycam Assembly ND40, ND44 4.70N123-007 Keycam Assembly ND50, ND53, ND60 11.20N123-009 Keycam Assembly ND66, ND75 Outside 65.50N123-010 Keycam Assembly ND73, ND70, ND72, ND25x70, ND70x80 Outside 11.30N123-059 Keycam Assembly ND75 Inside, ND95 Inside 48.80N123-008 Keycam Assembly ND82, ND12, ND80, ND25x80, ND70x80 Inside 13.50N123-055 Keycam Assembly ND85 65.50N123-011 Keycam Assembly ND91, ND92, ND93 15.30N123-012 Keycam Assembly ND94 15.30N123-054 Keycam Assembly ND95 Outside 65.50N123-013 Keycam Assembly ND96 12.50N123-097 Keycam assembly ND97 12.70N523-065 Cam pin for ND60 and ND93 3.50N523-066 Cam for inside ND60 and ND93 37.30Spring CagesN123-021 Inside spring cage for all double cylinder functions except SFIC $46.00N123-022 Outside spring cage for all functions except SFIC and ND10 46.00N123-032 Inside Spring Cage for all functions except double cylinder functions 33.10N123-043 Outside spring cage ND10 39.00N123-056 Outside spring cage for all SFIC functions 47.20N123-057 Inside spring cage for all SFIC double cylinder functions 30.40Slide & Related PartsC503-019 Slide Spring $4.70C604-187 Slide Catch Restoring 5.20C604-188 Slide Catch Non-restoring 5.20C604-191 Slide Catch Spring 4.90N523-025 Slide Clip 3.00N523-149 Slide (previous part number was N523-024) 13.90Spindles & Related PartsC604-340 Spindle Pin for ND170 $4.90N523-013 Outside Spindle 7.80N523-019 Outside Electrified Spindle 7.80N523-056 Inside Spindle 2.50N523-057 Inside Electrified Spindle 11.80Miscellaneous PartsC303-439 AC Rectifier $48.60C503-331 Plunger Spring (order in multiples of 50) 0.12L583-454 Chassis Screw 1.00N523-014 Outside Housing 7.70N523-015 Inside Hub for all Non-electrified functions except the ND66 and ND82 3.40N523-016 Inside Hub for ND66 & ND82 Functions 3.40N523-017 Outside Electrified Housing 8.10N523-018 Inside Electrified Hub 4.50N523-020 Emergency cylinder for ND40 & ND44 functions 3.70N523-026 Solenoid-EU 108.00N523-027 Solenoid-EL 94.30N523-028 Solenoid Retaining Clip for Electrified Functions 2.50N523-029 Wire Clamp for Electrified Functions 20.80N523-031 Sleeve for Electrified Functions 2.50N523-033 Screw for Electrified Functions 1.80N523-041 Catch stop 3.60N523-054 Adjustment Plate 3.60N523-055 Anti-rotation plate 3.60N523-063 Plunger Sleeve for ND60 and ND93 2.50N523-064 Plunger for ND60 and ND93 8.50N523-067 Plunger Bar for ND66 2.50N523-069 Dummy Insert for ND170 8.90N523-105 Threaded rod for mounting ND170s as double dummy set 11.10Price Book 72AEffective July 18, 2011 • Rev. 7/11ND-15

ND Levers • PartsScrews, Standard Screw Packs,Torx ® Screw Packs, Special PartsScrewsPrice EachPart Specify Door (Order in multiplesNumber Finish Description Thickness Type Size of 100)A501-171 • ND170, washer — Washer — $0.74N523-092 • ND170, mounting screw 1 1/2" – 2" POH Machine 1/4" 20 x 2 1/2" 0.80L583-133 • ND170, mounting surface — Sheet Metal 1#8 x 1” 0.60C603-256 • ANSI strike — PFH Combo 12-24 x 1" 0.70C603-897 • Latch and strike — PFH Combo #8 x 3/4" 0.74N523-021 Spring cage screws 1 3/8" – 2" PFH Machine #10 x 32 x 2 1/8" 1.10Screw Packs, StandardPart Specify PriceNumber Finish Description Contents EachB202-517 • Latch and strike (4) C603-897 $5.40N123-020 • Mounting, all except ND170 (4) C603-897 6.00(2) C603-256(2) N523-021(1) M504-271N123-040 • Mounting, ND170 (2) L583-133 6.80(1) N523-092(1) A501-171(1) M504-271C203-736 • ANSI strike (2) C603-256 4.50Screw Packs, Torx ®Part Specify PriceNumber Finish Description Contents EachC203-311 • Latch and strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15)(2) L583-371 (T-20)Note:1) Torx screw packs are furnished with appropriate T-xx installation tool(s).Special Parts$13.90⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Description EachXQ02-309* • 10-013 Strike, 7/8" flat lip $18.50XQ03-494* •10-013 Strike, 1 5/8" – 6" lip 83.4010-013 Strike, 6 1/8" – 12" lip 106.00XQ07-351* •10-025 Strike, 7/8" flat lip 19.7010-025 Strike, lips thru 6" (except 7/8", 1 3/16", 3/8" and 1 1/2") 95.30XC03-069 • Extension links, backsets over 5" – 42" 374.00XN12-012 • Chassis Spacer for 1 3/8" door (2 required) 21.00* Specify lip length.Note:2) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.ND-16Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctions H-2Complete Locks H-3H-Series Knob and Lever Designs . . . . . . . . H-3Options H-4Deadbolt/Latch Combinations . . . . . . . . . . . . H-4Deadbolt Strikes . . . . . . . . . . . . . . . . . . . . . . . H-5Latch Strikes . . . . . . . . . . . . . . . . . . . . . . . . . H-5Strike Combinations . . . . . . . . . . . . . . . . . . . . H-5Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . . . . H-6Locks Less Components . . . . . . . . . . . . . . . . H-7Non-Standard Door Prep . . . . . . . . . . . . . . . . H-8Non-Standard Door Thickness . . . . . . . . . . . .H-8Primus ® / Primus XP . . . . . . . . . . . . . . . . . . . H-8Parts H-9Knobs and Levers, Standard . . . . . . . . . . . . . H-9Knobs and Related Parts,Interchangeable Core . . . . . . . . . . . . . . . . . . H-9Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-9Escutcheons . . . . . . . . . . . . . . . . . . . . . . . . . H-9Deadbolt/Latch Combinations . . . . . . . . . . . H-10Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . H-10Deadbolt Strikes . . . . . . . . . . . . . . . . . . . . . H-11Latch Strikes . . . . . . . . . . . . . . . . . . . . . . . . H-11Deadbolt/Latch Strike Combinations . . . . . . H-11Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-12Backset Links and Reinforcements . . . . . . H-12Miscellaneous Parts . . . . . . . . . . . . . . . . . . . H-13Plunger Units . . . . . . . . . . . . . . . . . . . . . . . H-13Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-14Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationH 153 6 HHDoor Prep. SuffixNo suffix =1 1/2" Dia DeadboltHoleH = 2 1/8" Dia Deadbolt HoleCylinder SuffixNo suffix = 5-Pin Upper Cylinder6 = 6-Pin Cylinder(s)L = Less Standard Cylinder(s)L6 = Less 6-Pin Cylinder(s)R = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreFunctionLock SeriesFinish Codes and DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium PlatedStandard Features*H Knobs and LeversCertification ANSI A156.12 1999. UL Listed for 3-hour fire door.Deadbolt 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1" throwLatch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throwStrikes 1 1/8" x 2 3/4" Square corner, box (deadbolt) and 1 1/8" x 2 3/4", square corner T-strike, box (latch)Reinforcement Door frame strike reinforcer with 3" screwsBackset 2 3/8"Cylinder(s)*** 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, C123 keyway,keyed different (KD), upper and lower cylinders are keyed alike**Door Range 1 3/8" – 1 3/4"Keys Two nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with 5-pin upper cylinder, with upper and lower cylinders keyed 5-pinand with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11H-1

H • FunctionsANSI A156.12 1999. UL Listed for 3-hour fire door.Interconnected LocksSCHLAGEANSIH110 F95 Entrance, Single LockingDeadbolt thrown or retracted by keyin upper lock from outside or byinside turn unit. Bolt automaticallydeadlocks when fully thrown.Latchbolt retracted by knob/leverfrom either side. Inside knob/leverretracts deadbolt and deadlatchsimultaneously for immediate exit.H153 F97 Entrance, Double LockingDeadbolt thrown or retracted by keyin upper lock from outside or byinside turn unit. Bolt automaticallydeadlocks when fully thrown.Deadlatch retracted by key in outerknob when locked by pushing turnbuttonin inner knob/lever. Outer knobmay be fixed in locked position byrotating turn-button. Inside knob/leverretracts deadbolt and deadlatchsimultaneously for immediate exit.Interconnected LocksSCHLAGEH170ANSIH185 F100 Hotel-Motel Lock*Deadbolt thrown or retracted by keyin upper lock from outside or byinside turn unit. Bolt automaticallydeadlocks when fully thrown.Deadlatch retracted by key in outerfixed knob. Push-button in inner knob/lever activates visual occupancyindicator, allowing only emergencymasterkey to operate. Turning insideknob/lever or closing door releasesvisual occupancy indicator. Rotationof inside spanner-button provideslockout feature by keeping indicatorthrown. Turning inside knob/leverretracts deadbolt simultaneously forimmediate exit.Single Dummy Inside TrimSnap-on rose and knob/lever.Concealed mounting screws.H180 F98 Storeroom LockDeadbolt thrown or retracted by keyfrom outside or by inside turn unit.Bolt automatically deadlocks whenfully thrown. Outside knob is fixed.Entrance by key only. Turning insideknob/lever retracts deadbolt and latchsimultaneously for immediate exit.H-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

H-SeriesComplete Locks • HLevon (LEV) * Orbit (ORB) Plymouth (PLY)* LEV lever is available as inside trim only on keyed, double locking functions.H-SeriesDesigns and FinishesORB PLY LEV*605 609 619Function Description 626 625 643e 613KeylessH170 Single dummy $238 $250 $268Keyed, Single and Double LockingH110 EntranceH153** EntranceH180** Storeroom$364 $376 $394H185** Hotel-Motel* Levon (LEV) only available as inside trim on double locking functions** Double Locking functions (Lever and Deadbolt)Notes:1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.Price Book 72AEffective July 18, 2011 • Rev. 7/11H-3

H • OptionsDeadbolt/Latch Combinations19-071Standard19-077StandardDeadbolt/Latch CombinationsSpecifyHsg Combo Add toBackset Description Dia Latch Deadbolt Number Lock PriceDeadbolt/Springlatch Combinations for Single Locking Functions (H110 )Square corner , 1" X 2-1/4" 11-068 12-288 19-0712-3/8" Round corner , 1" X 2-1/4" 11-069 12-289 19-072Circular, drive-in, 626 only for bolt, 60511-110 12-290 19-073and 626 only for latch 1"N/CSquare corner , 1" X 2-1/4" 11-111 12-288 19-0742-3/4" Round corner , 1" X 2-1/4" 11-112 12-289 19-075Circular, drive-in, 626 only for bolt, 605 and626 only for latch11-113 12-290 19-076Deadbolt/Deadlatch Combinations for Double Locking Functions (H153, H180, H185)Square corner , 1" X 2-1/4" 11-085 12-288 19-0772-3/8" Round corner , 1" X 2-1/4" 11-088 12-289 19-078Circular, drive-in, 626 only for bolt, 605 and626 only for latch 1" 11-104 12-290 19-079 N/CSquare corner , 1" X 2-1/4" 11-091 12-288 19-0802-3/4" Round corner , 1" X 2-1/4" 11-092 12-289 19-081Circular, drive-in, 626 only for bolt, 605 and626 only for latch11-105 12-290 19-082* Latch has a fixed backset; Deadbolt is adjustable between 2-3/8" to 2-3/4" out of the boxShaded items are standard components and arefurnished with locks unless otherwise specified.H-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolt Strikes, Latch Strikes, Strike CombinationsOptions • H10-055Standard10-064 10-092 10-095Deadbolt StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, box, 1 1/8" x 2 3/4", standard—10-055Circular drive-in, thimble-strike, 1 3/16" diameter, 494 (for 626) only 10-0641/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8"10-092Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-095N/C10-001Standard10-026 10-027 10-058Latch StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4", standard 10-0011/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4"1 1/8"10-004Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-026 N/C1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 10-058Strike CombinationsSpecifyLatch Deadbolt Combo Add toStrike Strike Number Lock Price10-001, 1 1/8" Lip 10-055 10-25010-001, 1 1/8" Lip 10-064 10-25110-026 10-055 10-25210-026 10-064 10-25310-027 10-055 10-255 N/C10-027 10-064 10-25610-027 10-092 10-25710-058 10-064 10-25810-026 10-095 10-259Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11H-5

H • OptionsFull Size Interchangeable Core,Full Size Construction CoreOrbit (ORB)Available in:605 606609 612613 625626Full Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceAll interchangeable core(s) $29.00Example: H153R ORBR1 suffixLower interchangeable core with 6-pin upper cylinderExample: H153R1 ORBR2 suffixUpper interchangeable core with 6-pin lower cylinderExample: H153R2 ORBFull size construction core** T suffix Add to Lock PriceAll construction core(s) 29.00Example: H110T ORBLess full size core J suffix Deduct fromLess all interchangeable core(s)Lock PriceExample: H153J ORB 26.00J1 suffixLess lower interchangeable core with 6-pin upper cylinderExample: H153J1 ORBJ2 suffixLess upper interchangeable core with 6-pin lower cylinderExample: H153J2 ORB* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Available ORB design only for all functions except H110. All designs available for H110 function.3) Full size interchangeable core is not available for H185.H-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Locks Less ComponentsOptions • HLocks Less ComponentsDescription Specify Deduct from Lock PriceLess each knob or lever LLL for knob or lever design $7.30Example: H153 LLL/PLY x PLYLess each rose or escutcheon LLL for rose or escutcheon design 5.70Example: H153 PLY x PLY/LLLLess 5-Pin upper and 6-Pin lower L suffix 50.00 each cylcylinder(s)Example: H153L PLYLess 6-Pin upper and lower cylinder(s) L6 suffix 50.00 each cylExample: H153L6 PLYLess cylinders, Hotel function (H185) L suffix 124.00Example: H185L PLYLess deadbolt LLL for deadbolt 11.20Example: H153 PLY 626 LLL/11-085 10-250Less springlatch LLL for springlatch 9.40Example: H110 PLY 605 12-237/LLL 10-250Less deadlatch LLL for deadlatch 15.70Example: H153 PLY 626 12-237/LLL 10-250Less deadbolt strike LLL for deadbolt strike 4.30Example: H153 PLY 613 19-057 LLL/10-001Less latch strike LLL for latch strike 3.50Example: H153 PLY 613 19-057 10-055/LLLLock chassis only* LLL for all possible components Sum of all applicableExample: H153L LLL 626 LLL LLLdeducts, use PLY designfor base price* Chassis for non-ORB designs is furnished unless ORB design is specified. Includes housing and linkage.Price Book 72AEffective July 18, 2011 • Rev. 7/11H-7

H • OptionsNon-Standard Door Prep., Non-StandardDoor Thickness, Primus ® / Primus XP, Non-Standard FinishesNon-Standard Door Prep.Description Specify Add to Lock PricePreparation for 2 1/8" diameter deadbolt hole H suffix* $11.50Example: H110H ORB 626* Includes 38-031 adapter ring and G570-130 plate.Non-Standard Door ThicknessDescription Specify Add to Lock PriceExtended Inside (EI), from 2" – 2 1/2" Door thickness and how door is extended $51.90Example: 2", EINote:1) Locks are furnished extended inside (EI) only.Primus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionSpecifyH-Series keyed single locking lock and Primus Lock less cylinder (use L6 suffix). Order Primus cylinder separately.cylinderSee CylindersExample: 1 ea. H110L61 ea. 20-729H-Series keyed double locking lock and PrimuscylindersH-Series lock and Primus full size interchangeablecore cylinder(s)Note:2) Primus is not available for Hotel-Motel function (H185).Lock less cylinders (use L6 suffix). Order Primus cylinders separately.See CylindersExample: 1 ea. H153L61 ea. 20-5291 ea. 20-524Lock less full size core(s) (use J suffix). Order Primus core(s)separately. See Cylinders: Interchangeable Core.Example: 1 ea. H180J2 ea. 20-740H-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Lock Trim: Knobs and Levers, Knobs and Related Parts,Interchangeable Core, Roses, EscutcheonsParts • HKnobs and Levers, StandardDesigns and FinishesLEV ORB* PLYPartNumberDescription626 605 61301-008 Closed knob or lever01-009 Open knob or lever$24.70 $27.70 $32.7001-018 Cylinder knob and sleeve 35.50 38.50 43.5001-081 Sleeve for cylinder knob 7.00 — —* ORB knob requires modified chassis.Knobs and Related Parts, Interchangeable CoreDesigns and FinishesORBPartNumberDescription626 605 61301-026 Full size core knob $48.70 $51.50 $56.7001-054* Full size core knob, core, driver and retainer 110.00 113.00 118.00(converts PD to RD)01-053** Full size core driver and retainer 9.00A501-941** Full size core retainer 2.90C604-307** Full size core driver, universal 6.50* Furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with0-bitted interchangeable cores.** Design and finish not required.Note:1) Locks manufactured prior to March 1992 require installation of universal driver in chassisto accommodate Primus ® cores.RosesDesigns and FinishesPLY (use for LEV) TUL (use for ORB)PartNumberDescription626 605 61301-001 Outside Rose $17.90 $20.90 $25.90EscutcheonsDesigns and FinishesMETPartNumber Description 626 605 61307-057 Inside escutcheon and turn $80.50 $82.50 $84.5007-035 Inside escutcheon, dummy - H170 56.10 58.10 60.1036-056* Outside trim, tie-in escutcheon 26.90 28.90 30.90* Also available in 606, 609, 612, and 625 finishes.Price Book 72AEffective July 18, 2011 • Rev. 7/11H-9

H • PartsDeadbolt/Latch Combinations, Deadbolts19-071 19-077 19-079Deadbolt/Latch CombinationsCombo Specify Hsg PriceNumber Finish Backset Description Dia Latch Deadbolt EachDeadbolt/Springlatch Combinations for Single Locking Functions (H110)19-071 * Square corner , 1" X 2-1/4" 11-068 12-28819-072 * 2-3/8" Round corner , 1" X 2-1/4" 11-069 12-28919-073 * Circular, drive-in, 626 only for bolt11-110 12-290 $68.6019-074 * Square corner , 1" X 2-1/4"1"11-111 12-28819-075 * 2-3/4" Round corner , 1" X 2-1/4" 11-112 12-28919-076 * Circular, drive-in, 626 only for bolt 11-113 12-290Deadbolt/Deadlatch Combinations for Double Locking Functions (H153, H185)19-077 * Square corner , 1" X 2-1/4" 11-085 12-28819-078 * 2-3/8" Round corner , 1" X 2-1/4" 11-088 12-28919-079 * Circular, drive-in, 626 only for bolt 1" 11-104 12-290 $68.6019-080 * Square corner , 1" X 2-1/4" 11-091 12-28819-081 * 2-3/4" Round corner , 1" X 2-1/4" 11-092 12-28919-082 * Circular, drive-in, 626 only for bolt 11-105 12-290* Includes A506-868 latch front adapter and G506-815 housing sleeve for latch** Latch has a fixed backset; Deadbolt is adjustable between 2-3/8" to 2-3/4" out of the boxNote:1) To price latches separately, see A: Parts. To price deadbolts separately, see below.DeadboltsPart Specify Hsg PriceNumber Finish Backset Description Dia Each12-288 * 2-3/8" Square corner , 1" X 2-1/4"12-289 * to Round corner , 1" X 2-1/4" 1" $28.9012-290 * 2-3/4" Circular, drive-in, 626 only for bolt* Includes A506-868 latch front adapter and G506-815 housing sleeve.H-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolt Strikes, Latch Strikes, Deadbolt/LatchStrike CombinationsParts • H10-055 10-064 10-092 10-095Deadbolt StrikesPart Specify Lip PriceNumber Finish Description Length Each10-055 • Square corner, box, 1 1/8" x 2 3/4", standard—$13.0010-064 • Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 11.0010-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8" 7.1010-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"10-001 10-026 10-027 10-058Latch StrikesPart Specify Lip PriceNumber Finish Description Length Each10-001 • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard $7.2010-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4"1 1/8"7.8010-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4"7.0010-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"10-058 • Circular, adjustable, 1 3/4” diameter, 605 or 626 only 1 7/32" 10.10Deadbolt/Latch Strike CombinationsPart Specify PriceNumber Finish Deadbolt Strike Latch Strike Each10-250 • 10-055 10-001, 1 1/8" Lip $20.0010-251 • 10-064 10-001, 1 1/8" Lip 19.0010-252 • 10-055 10-026 19.8010-253 • 10-064 10-026 17.6010-255 • 10-055 10-027 19.8010-256 • 10-064 10-027 18.8010-257 • 10-092 10-027 14.7010-258 • 10-064 10-058 22.1010-259 • 10-095 10-026 14.70Price Book 72AEffective July 18, 2011 • Rev. 7/11H-11

H • PartsAdapters, Backset Links and ReinforcementsF506-868 G506-815AdaptersPartPriceNumber Description EachF506-868 Latch front adapter (use with 1" faceplate in 1 1/8" door prep.) Order in multiples of 100$0.50G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 5.10A501-565Backset Links and ReinforcementsPartPriceNumber Description Each37-001* Metal door reinforcer kit, fits both 7/8" and 1" diameter housings $26.00A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors.Fits both 7/8" and 1" diameter housings.A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors.13.10Fits both 7/8" and 1" diameter housings.G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 5.10* Specify door thickness; includes A501-567 and A501-565 or A501-566.H-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous Parts, Plunger Units,Dimension Chart: Plunger UnitsParts • HMiscellaneous PartsPartPriceNumber Description EachA201-370 Cam & driver - H180 $6.60A201-399 Hub & cap, out. - H153, H180, H185A201-406 Hub & cap, out. - H11021.30A301-386 Spindle & catch, ins.A301-387 Spindle & catch, out. 6.70A301-402 Cam unit, out. - H153, H185A501-305 Hub plate, ins. 5.20A501-615 Spindle wedge - H180, H185A501-710 Swivel sleeve - H1855.00A501-901 Plate, out. - H180, H185A508-399 Plate, out. - H110, H1533.50A508-597 Spring separator - H153, H180, H185 5.00A508-598 Frame 7.90A508-600 Housing 11.00A508-605 Slide springA590-158 Slide, restoring - H185A590-159 Slide, non-restoring - H153, H1805.00A590-181 Slide, non-restoring - H110C503-008 Cotter pin Order inmultiples of 1000.44G105-209 Housing and spindle, RH inside, dummy - H170 19.80G105-232 Housing and linkage 77.60G105-249 Housing and spindle, LH inside, dummy - H170 19.80G570-232 Plug, spindle - H110 9.20Plunger UnitsPart Specify PriceNumber Finish Description Each01-060 • Plunger unit, ins. - H153 $10.6001-063 • Plunger unit, ins. - H185 23.40Note:1) Specify dimension for all plunger units. See chart below for dimension.Dimension Chart: Plunger UnitsNumber Design Door Range DimNon-ORB 1 3/8" – 1 7/8" 36001-06001-063over 1 7/8" – 2 1/4", EI 424over 2 1/4" – 2 1/2", EI 449ORB 1 3/8" – 1 7/8" 428over 1 7/8" – 2 1/4", EI 492over 2 1/4" – 2 1/2", EI 517Non-ORB 1 3/8" – 1 7/8" 363over 1 7/8" – 2 1/4", EI 427over 2 1/4" – 2 1/2", EI 452ORB 1 3/8" – 1 7/8" 431over 1 7/8" – 2 1/4", EI 497over 2 1/4" – 2 1/2", EI 520Price Book 72AEffective July 18, 2011 • Rev. 7/11H-13

H • PartsScrewsScrewsPrice EachPart Door (order inNumber Description Thickness Type Size multiples of 100)A501-818 Mounting screw, upper cylinder 5-pin, — POH 10-32 x 2 1/16" $0.742 required Mach.E505-315 Mounting screw, lower chassis 2 required — POH 10-32 x 1 1/2" 0.88Mach.E505-366 Mounting screw, upper cylinder 6-pin, — POH 10-32 x 2 5/16" 0.722 required Mach.H-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctions L-2Complete Locks L-8A or B Rose Trim, Anti-Ligature . . . . . . . . . . . . . . . .L-8Anti-Ligature Knob . . . . . . . . . . . . . . . . . . . . . . . . . .L-8L Escutcheon Trim . . . . . . . . . . . . . . . . . . . . . . . . .L-10N Escutcheon Trim . . . . . . . . . . . . . . . . . . . . . . . . .L-12Decorative Trim . . . . . . . . . . . . . . . . . . . . . . . . . . .L-14danmark Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L-16Commercial Lever Suites . . . . . . . . . . . . . . . . . . . .L-18L9000 & L400-Series Deadbolt Locks . . . . . . . . . .L-19Options L-20Armor Fronts, L9000-Series . . . . . . . . . . . . . . . . . .L-20Strikes, L9000-Series . . . . . . . . . . . . . . . . . . . . . . .L-20Strikes, L400-Series . . . . . . . . . . . . . . . . . . . . . . . .L-21ADA Thumbturn . . . . . . . . . . . . . . . . . . . . . . . . . . .L-21Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . . . . . . . .L-22Small Format Interchangeable CoreSmall Format Construction Core . . . . . . . . . . . . . .L-22Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L-22Locks Less Components . . . . . . . . . . . . . . . . . . . . . .L-23Non-Standard Door Thickness . . . . . . . . . . . . . . . .L-24Primus ® / Primus XP . . . . . . . . . . . . . . . . . . . . . . . .L-24Request to Exit (RX) Feature . . . . . . . . . . . . . . . .L-24Vandlgard Option . . . . . . . . . . . . . . . . . . . . . . . . . .L-25Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . .L-25Tamper Resistant Torx ® Screws . . . . . . . . . . . . . . .L-25Folger Adam ® Lever Trak . . . . . . . . . . . . . . . . . . .L-25Special Options . . . . . . . . . . . . . . . . . . . . . . . . . . . L-26Distributor Pack Program L-27Lock Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-28Trim Set Combinations . . . . . . . . . . . . . . . . . . . . . L-29Armor Fronts, Strikes, Cylinders . . . . . . . . . . . . . . L-30Escutcheon Bolts, Mounting Posts,Mounting Screws . . . . . . . . . . . . . . . . . . . . . . . . . . L-31Parts L-32Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-32Outside Knob/Lever and Rose/EscutcheonAssemblies, Armor Fronts . . . . . . . . . . . . . . . . . . . L-34Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-35Buttons & Thumbturns, Cylinder Turns . . . . . . . . . L-36Occupancy Indicators . . . . . . . . . . . . . . . . . . . . . . L-36Escutcheon Thru-Bolts . . . . . . . . . . . . . . . . . . . . . L-37Mounting Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . L-37Spindles and Springs . . . . . . . . . . . . . . . . . . . . . . .L-37Electrified Lock Kits . . . . . . . . . . . . . . . . . . . . . . . . L-37Lock Cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-38Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . . L-39Anti-Ligature Conversion Kits . . . . . . . . . . . . . . . . .L-40Classroom Security Function Conversion Kits . . . . .L-41Screw Packs, Standard . . . . . . . . . . . . . . . . . . . . . L-42Screw Packs, Torx ® , Special Parts . . . . . . . . . . . . L-42Complete CylindersSee Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationL/LV 94 53 PCylinder SuffixP = 6-Pin Full Face MortiseCylinder with Schlage Logo*L = Less Full Face CylinderC =Concealed Mortise CylinderW = Less Concealed CylinderR = Full Size InterchangeableCore with Schlage LogoJ = Less Full SizeInterchangeable CoreF = Full Size InterchangeableCore Less Schlage LogoT = Full Size Construction CoreBD = Less SFICBDC = Disposable SFICGD = Everest ® Patented SFICHD = Construction SFICFunction0 = No Deadbolt1 = Dummy Trim4 = With Deadbolt0 = Dummy Trim without Lock Case9 = Functions with Lock CaseLock Series PrefixL = StandardLV = VandlgardSFIC = Small Format (Best ® Style) Interchangeable CoreFinish Codes and DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated626AMAntimicrobial Coating on Satin Chromium629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel630AMAntimicrobial Coating onSatin Stainless Steel643e (US 11) Aged BronzeLStandard Features*Certifications L/LV9000: ANSI/BHMA Certified A156.13-2005, Series 1000, Grade 1 Operational,Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077).With FSIC Interchangeable Core Cylinders: Grade 2 Security.With SFIC Interchangeable Core Cylinders: Grade 3 Security.L400: ANSI/BHMA Certified A156.5-2001, Grade 1, UL Listed for 3-hour fire door.Case Size L/LV9000: 4 7/16" x 6 1/16" x 1"; L400: 4 7/16" x 3 5/8" x 1"Armor Front L/LV9000: 1 1/4" x 8"; L400: 1 1/4" x 5 9/16"Deadbolt 1" Throw stainless steelLatchbolt 3/4" Throw stainless steel with anti-friction tongueStrike L/LV9000: 1 1/4" x 4 7/8" Square corner, 1 3/16" lip, box; L400: 1 1/8" x 3 5/8" square corner, boxBackset 2 3/4"Cylinder *** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/4"KeysTwo nickel silver cut keys per lock, 6-pin, C123 section**BAA/ARRA For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative tosee the Ingersoll Rand Security Technologies BAA/ARRA catalog.* Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-1

L • FunctionsANSI/BHMA Certified A156.13-2005, Series 1000, Grade 1 Operational, Grade 1 Security, UL Listedfor 3-hour fire door (except L9076 and L9077).Mortise Locks Non-KeyedMortise Locks Non-Keyed DummySCHLAGEANSIL9010 F01 Passage LatchLatchbolt retracted by knob/leverfrom either side at all times. Insidelever is always free for immediateegress.SCHLAGEL0170ANSIHalf Dummy TrimKnob/lever on one side fixed bymounting bar. Not for use on wooddoors, recommend L9175.L9040LV9040L9044LV9044F22Bath/Bedroom Privacy LockLatchbolt retracted by knob/leverfrom either side unless outside islocked by inside thumbturn.Turninginside knob/lever or closing doorunlocks outside knob/lever. Tounlock from outside, removeemergency button, insert emergencythumbturn(furnished) in access holeand rotate. Inside lever is always freefor immediate egress.Privacy With Coin TurnOutsideLatchbolt retracted by knob/leverfrom either side unless outside islocked by inside thumbturn oroutside coin turn. Operating insideknob/lever, closing door, rotatinginside thumbturn or rotating outsidecointurn unlocks outside knob/lever.Specify per L283-056 for Torx ®screws. Available with rose trimonly.L0172L9175L9176Full Dummy TrimKnob/lever on both sides fixed bymounting bar.Half Dummy Trim w/ LockCaseFixed knob/lever on one sideinoperable. Includes lock caseand armored front.Options same as L9176 below.Full Dummy Trim w/ Lock Case*Fixed knob/lever on both sides.Includes lock case and blank armorfront. May be ordered with optionalXL11-743 armored front with cutoutto receive deadbolt.L9440LV9440L9444LV9444F19Privacy With DeadboltLatchbolt retracted by knob/leverfrom either side. Deadbolt thrownor retracted by inside thumbturn.Throwing deadbolt locks outsideknob/lever. Rotating insideknob/lever simultaneously retractsdeadbolt and latchbolt, and unlocksoutside knob/lever. To unlock fromoutside, remove emergency button,insert emergency thumbturn inaccess hole and rotate. Inside leveris always free for immediate egress.Privacy With Deadbolt andCoin Turn OutsideLatchbolt retracted by knob/leverfrom either side. Deadbolt thrown orretracted by inside thumbturn oroutside coin turn. Throwing deadboltlocks outside knob/lever. Rotatinginside knob/lever simultaneouslyretracts deadbolt and latchbolt, andunlocks outside knob/lever. Rotatingoutside coin turn retracts deadboltand unlocks outside knob/lever.Specify per L283-056 for Torxscrews. Available with rose trimonly. Inside lever is always free forimmediate egress.LV- Vandlgard function allowsexterior lever to rotate freelydown, while remainingsecurely locked.* In a double door application wherethe dummy will be used as thestrike, order 10-091 ArmoredFront Strike separately.L-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Functions • LMortise Locks-KeyedMortise Locks-KeyedSCHLAGEL9050LV9050L9056LV9056L9060LV9060L9070LV9070L9071LV9071L9076LV9076ANSIF04F09F05F32F06Office and Inner Entry LockLatchbolt retracted by knob/lever fromeither side unless outside is madeinoperative by key outside or byturning inside thumbturn. Whenoutside is locked, latchbolt is retractedby key outside or by knob/lever inside.Outside knob/lever remains lockeduntil thumbturn is returned to verticalor unlocked by key. Auxiliary latchdeadlocks latchbolt when door islocked. Inside lever is always free forimmediate egress.L9050 With Automatic UnlockingLatchbolt retracted by knob/lever fromeither side unless outside is made inoperativeby key outside or by rotating insidethumbturn. Outside knob/lever unlockedby key outside or thumbturn. Rotatinginside knob/lever simultaneously retractslatchbolt and unlocks outside knob/lever.Auxiliary latch deadlocks latchbolt whendoor is locked. Inside lever is always freefor immediate egress.Apartment Entrance LockLatchbolt retracted by knob/lever fromeither side unless outside is locked bykey from inside. When locked, latchboltretracted by key outside or knob/leverinside. Auxiliary latch deadlocks latchboltwhen door is locked. Inside lever isalways free for immediate egress.Classroom LockLatchbolt retracted by knob/lever fromeither side unless outside is locked by key.Unlocked from outside by key. Insideknob/lever always free for immediate exit.Auxiliary latch deadlocks latchbolt whendoor is locked. Inside lever is always freefor immediate egress.Classroom Security LockLatchbolt retracted by knob/lever fromeither side unless outside is locked by keyfrom either side. Auxiliary latch deadlockslatchbolt when door is locked. Inside leveris always free for immediate egress.Available with lock indicator on insideper XL11-986.Classroom Holdback LockLatchbolt retracted by knob/lever fromeither side unless outside is locked bykey. When locked, latchbolt retracted bykey outside or knob/lever inside.Auxiliary latch deadlocks latchbolt whendoor is locked. Depress inside knob/leverand turn key 360º for holdback feature.Inside lever is always free forimmediate egress.SCHLAGEL9077LV9077L9080LV9080L9080ELLV9080ELL9080EULV9080EUPrice Book 72AEffective July 18, 2011 • Rev. 7/11ANSIF07L9080EL-RXL9080EU-RXLV9080EL-RXLV9080EU-RXClassroom SecurityHoldback LockLatchbolt retracted by knob/leverfrom either side unless outside islocked by key from either side.When locked, latchbolt retracted bykey outside or knob/lever inside.Auxiliary latch deadlocks latchboltwhen door is locked. Depress insideknob/lever and turn key 360º forholdback feature. Inside lever isalways free for immediate egress.Storeroom LockLatchbolt retracted by key outside or byknob/lever inside. Outside knob/leveralways inoperative. Auxiliary latchdeadlocks latchbolt when door islocked. Inside lever is always free forimmediate egress.Electrically Locked (Fail Safe)Outside knob/lever continuously lockedby 24V AC or DC. Latchbolt retractedby key outside or by knob/lever inside.Switch or power failure allows outsideknob/lever to retract latchbolt. Auxiliarylatch deadlocks latchbolt when door islocked. Inside knob/lever always freefor immediate exit. Inside lever isalways free for immediate egress.Electrically Unlocked (Fail Secure)Outside knob/lever unlocked by24V AC or DC. Latchbolt retracted by keyoutside or knob/lever inside. Auxiliarylatch deadlocks latchbolt when door islocked. Inside knob/lever always free forimmediate exit. Inside lever is always freefor immediate egress.Request To Exit (RX)Electrified LockSame as L9080EL and L9080EUfunctions. In addition, a micro switchpositioned inside the lock case monitors theretractor crank, and is actuated whenrotation of the inside or outside knob/leverrotates the retractor hub. The switch signalsthe use of that opening to security systems,allowing a non-disruptive means ofimmediate egress. Specify L283-263 withL fuctions. Specify L283-239 with LVfunctions. Inside lever is always free forimmediate egress.LV- Vandlgard function allows exterior lever to rotate freelydown, while remaining securely locked.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.L-3

L • FunctionsMortise Locks-KeyedMortise Locks-KeyedSCHLAGEANSISCHLAGEANSIL9082LV9082L9082ELL9082EUL9082EL-RXL9082EU-RXF30Institution Lock*Latchbolt retracted by key fromeither side. Knob/lever on bothsides always inoperative.Auxiliary latch deadlockslatchbolt when door is locked.L9082 Electrically Locked orElectrically Unlocked BothSides*EL: Outside and inside knob or levercontinually locked electrically.Latchbolt retracted by key eitherside. Switch or power failure allowsoutside and inside knob/lever toretract latchbolt. Auxiliary latchdeadlocks latchbolt when door isclosed. EU: Outside and insideknob/lever unlocked electrically.Latchbolt retracted by key eitherside. Switch or power failure keepsinside and outside knob/lever locked.Auxiliary latch deadlocks latchboltwhen door is locked.(Previously XL11-452)Request To Exit (RX)Electrified LockSame as L9080EL and L9080EUfunctions. In addition, a micro switchpositioned inside the lock case monitorsthe retractor crank, and is actuatedwhen rotation of the inside or outsideknob/lever rotates the retractor hub.The switch signals the use of thatopening to security systems, allowinga non-disruptive means of immediateegress. Specify L283-263. Inside leveris always free for immediate egress.L9456LV9456L9457LV9457L9458LV9458L9465F13F33F34Corridor LockLatchbolt retracted by knob/leverfrom either side. Deadbolt thrownor retracted by key outside or insidethumbturn. Throwing deadbolt locksoutside knob/lever. Turning insideknob/lever simultaneously retractsdeadbolt and latchbolt and unlocksoutside knob/lever. Inside lever isalways free for immediate egress.Classroom Security Lock w/ DeadboltLatchbolt retracted by knob/leverfrom either side. Deadbolt thrownor retracted by key from either side.Throwing deadbolt locks outside knob/lever.Turning inside knob/lever simultaneouslyretracts deadbolt and latchbolt and unlocksoutside knob/lever. Inside lever is alwaysfree for immediate egress. Available withlock indicator on inside per XL11-986Classroom Security Lock w/Deadbolt and Auxiliary LatchLatchbolt operated by lever fromeither side except when outside leveris lock from inside or outside by key.Deadbolt retracted by key frominside or outside. Operating insidelever retracts both bolts and unlocksoutside. Auxiliary deadlatch whendoor is locked. Inside lever is alwaysfree for immediate egress.Closet/Storeroom LockLatchbolt retracted by knob/leverfrom either side. Deadbolt thrownor retracted by key outside.L9453LV9453L-4F20Entrance LockLatchbolt retracted by knob/leverfrom either side unless outside islocked by 20° rotation of thumbturn.Deadbolt thrown or retracted by 90°rotation of thumbturn. When locked,key outside or knob/lever insideretracts deadbolt and latchboltsimultaneously. Outside knob/leverremains locked until thumbturn isrestored to vertical position.Throwing deadbolt automaticallylocks outside knob/lever. Auxiliarylatch deadlocks latchbolt whendoor is locked. Inside lever is alwaysfree for immediate egress.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.L9466 F14 Store/Utility Room Lock*Latchbolt retracted by knob/leverfrom either side. Deadbolt thrown orretracted by key from either side.L9473 F21 Dormitory/Bedroom LockLatchbolt retracted by knob/leverfrom either side. Deadbolt thrownor retracted by key outside orthumbturn inside.Price Book 72AEffective July 18, 2011 • Rev. 7/11LV- Vandlgard function allowsexterior lever to rotate freelydown, while remainingsecurely locked.

Functions • LMortise Locks-KeyedMortise Locks-KeyedSCHLAGE ANSI SCHLAGE ANSIL9480LV9480L9485LV9485Storeroom Lock With DeadboltLatchbolt retracted by key outsideor by lever or knob inside. Outsideknob/lever always fixed. Deadboltthrown or retracted by key outsideor thumbturn inside. Turning insideknob/lever simultaneously retractsboth deadbolt and latchbolt.Auxiliary latch deadlocks latchboltwhen door is locked. Inside lever isalways free for immediate egress.Faculty Restroom LockLatchbolt retracted by key outsideor by knob/lever inside. Outsideknob/lever always fixed. Deadboltthrown or retracted by insidethumbturn. When deadbolt is thrown,all keys become inoperative exceptemergency or display keys.Turning inside knob/lever retractsboth deadbolt and latchboltsimultaneously. Auxiliary latchdeadlocks latchbolt when dooris locked. Inside lever is always freefor immediate egress.L9486LV9486DO NOT DISTURBF15L9486 x L583-375LV9486 x L583-375OCCUPIEDFaculty Restroom Lock with“Do Not Disturb” IndicatorLatchbolt retracted by key outsideor by knob/lever inside. Outsideknob/lever always fixed. Deadboltthrown or retracted by insidethumbturn. When deadbolt is thrown,“DO NOT DISTURB” plate isdisplayed. All keys becomeinoperative except emergency ordisplay keys. Turning insideknob/lever retracts both deadboltand latchbolt simultaneously.Auxiliary latch deadlocks latchboltwhen door is locked. Inside lever isalways free for immediate egress.L9486 With “OCCUPIED”IndicatorLatchbolt retracted by key outsideor by knob/lever inside. Outsideknob/lever always fixed. Deadboltthrown or retracted by insidethumbturn. When deadbolt is thrown,“OCCUPIED” plate is displayedand all keys become inoperativeexcept emergency keys. Turninginside knob/lever simultaneouslyretracts both deadbolt and latchbolt.Auxiliary latch deadlocks latchboltwhen door is locked. Inside lever isalways free for immediate egress.L9496LV9496OCCUPIEDPrivacy With “OCCUPIED”IndicatorKnob/lever retracts latchbolt fromeither side. Deadbolt thrown orretracted by key outside (retractionby key required in the event of anemergency) or inside thumbturn.Throwing deadbolt locks outsideknob/lever and displays“OCCUPIED” plate. Rotatinginside knob/lever simultaneouslyretracts both deadbolt and latchboltand unlocks outside knob/lever.Inside lever is always free forimmediate egress.LV- Vandlgard function allowsexterior lever to rotate freelydown, while remainingsecurely locked.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-5

L • FunctionsANSI/BHMA Certified A156.5-2001, Grade 1,UL Listed for 3-hour fire door.Mortise Locks-Keyed DeadboltsSCHLAGEANSIL9460 F17 Cylinder x Thumbturn LockDeadbolt thrown or retracted by keyoutside or thumbturn inside.Mortise Locks-Small Case DeadboltsSCHLAGE ANSIL460 E06071 Cylinder x Thumbturn LockDeadbolt thrown or retracted bykey outside or thumbturn inside.L9462 F16 Double Cylinder Lock*Deadbolt operated by keyfrom either side.L462 E06061 Double Cylinder Lock*Deadbolt operated by keyfrom either side.L9463 F29 Classroom LockDeadbolt thrown or retracted bykey from outside. Inside thumbturncylinder retracts deadbolt butcannot project it.L463 E06091 Classroom LockDeadbolt thrown or retracted bykey from outside. Inside thumbturncylinder retracts deadbolt but cannotproject it.L9464 F18 Cylinder LockDeadbolt thrown or retracted bykey from one side. No trim onopposite side.L464 E06081 Cylinder LockDeadbolt thrown or retracted bykey from one side. No trim onopposite side.L480Door BoltDeadbolt thrown or retracted bythumbturn from one side. No trimon opposite side.L496OCCUPIEDDeadbolt With “OCCUPIED”IndicatorDeadbolt thrown or retracted bykey outside or thumbturn inside.When deadbolt is thrown“OCCUPIED” plate is displayed.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.L-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Functions • LSpecial FunctionsSpecial FunctionsSCHLAGEL9110 x XL11-741Double Dummy With Active TrimKnob/lever both sides always active.Includes lock case and armor front.Specify per XL11-741. May beordered with optional XL11-743armor front with cutout to receivedeadbolt only.SCHLAGEL9482 x XL11-543LV9482Institution Lock With Deadbolt*Latchbolt retracted by key from eitherside. Knob/lever on both sides alwaysinoperative. Deadbolt thrown orretraced by key either side. Auxiliarylatch deadlocks latchbolt when door islocked. Specify per XL11-543.L9040 x XL11-446LV9040L9066 x XL11-897Privacy With Turns Both SidesLatchbolt retracted by knob/leverfrom either side unless outside islocked by inside or outsidethumbturn. Operating inside knob/lever, closing door or rotating eitherthumbturn unlocks outside knob/lever.Specify per XL11-446.Storeroom Lock*Key in either cylinder locks or unlocksboth levers. Specify per XL11-897.L9485 x XL11-557Prison Function LockLatch retracted by key outside or knobinside. Outside knob always freespinning. Deadbolt only thrown orretracted by guard’s key. Inside knobbecomes fixed when deadbolt isthrown. Auxiliary latch deadlockslatchbolt when door is locked.Prisoner’s key only retractslatchbolt. Furnished standard withtamper resistant Torx ® screws. Specifyper XL11-557.L9412 x XL11-907Exit Lock With DeadboltLatchbolt retracted by knob/leverinside. Outside knob/lever alwaysfixed. Deadbolt thrown or retractedby inside thumbturn. Turning insideknob/lever retracts both deadboltand latchbolt simultaneously. Auxiliarylatch deadlocks latchbolt when door islocked. Specify per XL11-907.L9460 x XL11-635L9460 With Fixed Dummy TrimKnob/lever both sides fixed. Deadboltthrown or retracted by key outside orthumbturn inside. Specify perXL11-635.L9460, L9462, L9464 Deadbolt With Retraction ByInside Lever or KnobL9460: Deadbolt thrown or retractedby key outside or thumbturn inside.Outside knob/lever always fixed.Inside knob/lever active whendeadbolt is extended. Rotating insideknob/lever will retract deadbolt.L9462: Same as above, exceptdeadbolt thrown or retracted by keyfrom either side.L9464 (shown): Same as above,except deadbolt thrown or retracted bykey from one side. Specify desiredfunction per XL11-886.Note:1) For pricing on special functions,see “Special Options” pageLV- Vandlgard function allowsexterior lever to rotate freelydown, while remainingsecurely locked.* Caution: Double cylinder locks on residences and anydoor in any structure which is used for egress are a lifesafety hazard in times of emergency and their use is notrecommended. Installation should be in accordance withexisting codes only.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-7

L • Complete LocksA or B Rose Trim, Anti-LigatureCast or Forged Lever Designs with Wrought Roses0102 0305 06 071217 18OME(Specify door hand)Anti-Ligature LeverSL1For AdditionalLever DesignsSee PagesL-14 and L-16Anti-Ligature KnobSK1Wrought Knob Designs41 42Wrought Rose DesignsAB(2 1/8" Diameter)(2 9/16" Diameter)L-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

A or B Rose TrimComplete Locks • LL-Series (A or B Rose Trim) and Anti-ligatureLever or Knob Designs and FinishesStandard Leadtime03 06 07 03 06 07 12 17 Anti- Anti-12 17 OME Ligature LigatureOME SK1 SL1⧖Additional Leadtime:01 02 05 18 41 42626 626 605 606 613 630 630609 612 629Add $76 for Vandlgard Option619 625 630Function Description 643eKeyless FunctionsL9010 Passage $427 $526 $538 $556 $1,363 $1,613L9040 • Privacy 501 604 616 634 1,438 1,688L9044 • Privacy w/ coin turn 549 655 667 685 - -L9440 • Privacy w/ deadbolt 587 694 706 724 1,525 1,775L9444 • Privacy w/ deadbolt and coin turn 633 745 757 775 - -L0170 Single dummy 141 187 193 203 - -L0172 Double dummy 287 380 392 410 - -L9175 Single dummy with case 232 281 287 297 - -L9176 Double dummy with case 367 463 475 493 1,302 1,552Keyed Single Cylinder FunctionsL9050P • Office and inner entry $566 $673 $685 $703 $1,504 $1,754L9056P • Office w/ simult. Retraction 624 733 745 763 1,562 1,812L9070P • ClassroomL9076P • Classroom holdback 566 673 685 703 1,504 1,754L9080P • StoreroomL9080PEL • Electrically lockedL9080PEU • Electrically unlocked900 974 986 1,004 1,794 2,044L9453P • Entrance w/ deadboltL9456P • Corridor w/ deadbolt 586 694 706 724 1,524 1,774L9465P Closet/Storeroom w/ deadboltL9473P Dorm/Bedroom w/ deadboltL9480P • Storeroom w/ deadbolt 650 761 773 791 1,589 1,839L9485P** • Faculty Restroom 624 733 745 763 1,562 1,812L9486P** • Faculty Restroom w/ 'Do Not Disturb' indicatorL9496P • Privacy w/ deadbolt & Occupied Ind.679 791 803 821 - -Keyed Double Cylinder FunctionsL9060P • Apartment entranceL9071P • Classroom securityL9077P • Classroom security holdback$629 $739 $751 $769 $1,568 $1,818L9082P • InstitutionL9082PEL Electrically locked 953 1,028 1,040 1,058 1,845 2,095L9082PEU Electrically unlockedL9457P • Classroom security w/ deadboltL9458P • Classroom security w/ deadbolt & aux latch 629 739 751 769 1,568 1,818L9466P Storeroom w/ deadbolt* Specify door hand for 12 lever design.** Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unlessotherwise specified. Emergency keys must be ordered separately. L9486 also available with “Occupied” indicator option. SpecifyL583-375 and add $14.60.# Specify XL11-000 when ordering anti-ligature knob and XL12-482 when ordering anti-ligature lever. Includes levers, knobs, roses,thumbturn and cylinder ring as appropriate per function. Not available less components or cylinders; less core is available.Anti-ligature mixed trim available with SK1 anti-ligature knob and SL1 anti-ligature lever only; specify both XL11-000 andXL12-482 when ordering.Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information4) Add $76.00 for Vandlgard option. ( LV = Prefix ) Not available with 41 and 42 knobs.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-9

L • Complete LocksL Escutcheon TrimCast or Forged Lever Designs with Forged Escutcheons01L 02L 03L05L06L 07L 12L 17L(Specifydoor hand)18LOMEFor AdditionalLever DesignsSee PagesL-14 and L-16Wrought Knob Designs41L42LConcealed CylinderLFull Face CylinderLL-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

L Escutcheon TrimComplete Locks • LL-Series (L Escutcheon Trim)Add $76 for Vandlgard OptionLever or Knob Designs and FinishesStandard Leadtime: 03 06 07 12 17 OME⧖ Additional Leadtime: 01 02 05 18 41 42626 605 606 609 613 629 630612 619 625Function Description 643eKeylessL9010 Passage $558 $570 $588L9040 • Privacy 636 648 666L9440 • Privacy w/ deadbolt 726 738 756L0172 Double dummy 412 424 442L9175 Single dummy with case 313 319 329L9176 Double dummy with case 495 507 525Keyed Single Cylinder FunctionsL9050P • Office and inner entry $705 $717 $735L9056P • Office w/ simult. Retraction 765 777 795L9070P • ClassroomL9076P • Classroom holdback 705 717 735L9080P • StoreroomL9080PEL • Electrically lockedL9080PEU • Electrically unlocked1,006 1,018 1,036L9453P • Entrance w/ deadboltL9456P • Corridor w/ deadboltL9465P Closet/Storeroom w/ deadbolt726 738 756L9473P Dorm/Bedroom w/ deadboltL9480P • Storeroom w/ deadbolt 793 805 823L9485P** • Faculty Restroom 765 777 795L9486P** • Faculty Restroom w/ 'Do Not Disturb' indicatorL9496P • Privacy w/ deadbolt & Occupied Ind.823 835 853Keyed Double Cylinder FunctionsL9060P • Apartment entranceL9071P • Classroom securityL9077P • Classroom security holdback$771 $783 $801L9082P • InstitutionL9082PEL Electrically lockedL9082PEU Electrically unlocked1,060 1,072 1,090L9457P • Classroom security w/ deadboltL9458P • Classroom security w/ deadbolt & aux latch 771 783 801L9466P Storeroom w/ deadbolt* Specify door hand for 12 lever design.** Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pin keys unlessotherwise specified. Emergency keys must be ordered separately. L9486 also available with “Occupied” indicator option. SpecifyL583-375 and add $14.60.Notes:1) Prices listed are for both full face and concealed cylinder escutcheon trim.2) Split designs and/or finishes are priced at the highest design and/or finish price.3) Keying options: see Keys & Keying.4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information5) Add $18.00 per cylinder for the concealed cylinder (C: Suffix).6) Add $76.00 for Vandlgard option. ( LV = Prefix ) Not available with 41 and 42 knobs.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-11

L • Complete LocksN Escutcheon TrimCast or Forged Lever Designs with Wrought Escutcheons01N 02N 03N 05N06N 07N 12N17N(Specifydoor hand)18NOMEFor AdditionalLever DesignsSee PagesL-14 and L-16Wrought Knob Designs41N42NL-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

N Escutcheon TrimComplete Locks • LL-Series (N Escutcheon Trim)Add $76 for Vandlgard OptionLever or knob Designs and FinishesStandard Leadtime: 03 06 07 12 17 OME⧖ Additional Leadtime: 01 02 05 18 41 42626 605 606 609 613 629 630612 619 625Function Description 643eKeylessL9010 Passage $548 $560 $578L9040 • Privacy 626 638 656L9440 • Privacy w/ deadbolt 716 728 746L0170 Single dummy 209 215 225L0172 Double dummy 402 414 432L9175 Single dummy with case 303 309 319L9176 Double dummy with case 485 497 515Keyed Single Cylinder FunctionsL9050P • Office and inner entry $695 $707 $725L9056P • Office w/ simult. Retraction 755 767 785L9070P • ClassroomL9076P • Classroom holdback 695 707 725L9080P • StoreroomL9080PEL • Electrically locked 996 1,008 1,026L9080PEU • Electrically unlockedL9453P • Entrance w/ deadboltL9456P • Corridor w/ deadboltL9465P Closet/Storeroom w/ deadbolt716 728 746L9473P Dorm/Bedroom w/ deadboltL9480P • Storeroom w/ deadbolt 783 795 813L9485P** • Faculty Restroom 755 767 785Keyed Double Cylinder FunctionsL9060P • Apartment entranceL9071P • Classroom securityL9077P • Classroom security holdback$761 $773 $791L9082P • InstitutionL9082PEL Electrically lockedL9082PEU Electrically unlocked1,050 1,062 1,080L9457P • Classroom security w/ deadboltL9458P • Classroom security w/ deadbolt & aux latch 761 773 791L9466P Storeroom w/ deadbolt* Specify door hand for 12 lever design.** Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two 6-pinkeys unless otherwise specified. Emergency keys must be ordered separately.Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information4) Add $76.00 for Vandlgard option. ( LV = Prefix ) Not available with 41 and 42 knobs.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-13

L • Complete LocksDecorative TrimDecorative Levers (For suites with F/FA Residential Decorative Levers, see page 18.)Asti(AST/AVA)Merano(MER/MER)Accent(ACC)St. Annes(STA)Unless otherwise specified,default rose is the Avanti RoseUnless otherwise specified,default rose is the Merano RoseLatitude(LAT)Longitude(LON)Decorative RosesABAvanti (AVA)Merano (MER)(2 1/8" Diameter) (2 9/16" Diameter) (2 5/8" Diameter) (2 5/8" Diameter)Decorative Levers and L EscutcheonsAsti(AST/00L)Merano(MER/00L)Accent(ACC/00L)St. Annes(STA/00L)L-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

Decorative TrimComplete Locks • LDecorative TrimLever Designs and FinishesAST MER ACC STALAT LON (LAT & LON NOT IN 605)Add $76 Rose 00L Rose 00Lfor 626 626 605 605Vandlgard 619 625 619 625Function Option Description 643e 643eKeylessL9010 Passage $602 $702 $614 $714L9040 • Privacy 692 792 704 804L9440 • Privacy w/ deadbolt 790 890 802 902L0170 Single dummy 214 – 220 –L0172 Double dummy 435 535 447 547L9175 Single dummy w/ case 321 421 327 427L9176 Double dummy w/ case 523 623 535 635Keyed Single CylinderL9050P • Office $767 $867 $779 $879L9056P • Office w/ simult. retraction 838 938 850 950L9070P • ClassroomL9076P • Classroom Holdback 768 868 780 880L9080P • StoreroomL9080PEL • Electrically locked 1,066 1,166 1,078 1,178L9080PEU • Electrically unlockedL9453P • Entrance w/ deadboltL9456P • Corridor w/ deadbolt 791 891 803 903L9465PCloset/Storeroom w/ deadboltL9473PDorm/Bedroom w/ deadboltL9480P • Storeroom w/ deadbolt 861 961 873 973L9485P* • Faculty Restroom 838 938 850 950L9496P • Privacy w/ deadbolt and 904 1,004 916 1,016Occupied Indicator* Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two6-pin keys unless otherwise specified. Emergency keys must be ordered separately.Notes: 1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Split rose trim by escutcheon trim is not available.3) Specify door hand for all lever designs.4) Keying options: see Keys & Keying.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information6) Add $18.00 per cylinder for the concealed cylinder (C: Suffix).7) Add $76.00 for Vandlgard option. ( LV = Prefix )Price Book 72AEffective July 18, 2011 • Rev. 7/11L-15

L • Complete Locksdanmark Satin Stainless Steel LeversStyle 611 Style 615Style 621danmark Stainless Steel LeversStyle 640(Specify door hand)Style 650Style 660 Style 690Style 695Style 696danmark StainlessSteel Rose(2 1/8" Diameter)All lever styles are available in Satin Stainless Steel finish (630) only.L-16Price Book 72AEffective July 18, 2011 • Rev. 7/11

danmark Stainless Steel LeversComplete Locks • Ldanmark Satin Stainless Steel LeversLever Designs⧖ Extended Factory Lead TimeAdd $76 611 621 615 640for 660 690 650 695 696VandlgardFinishFunction Option Description 630 630KeylessL9010 Passage $652 $791L9040 • Privacy 748 887L9044 • Privacy w/ cointurn 811 950L0172 Double dummy 470 609L9176 Double dummy w/ case 583 722Keyed Single CylinderL9050P • Office $833 $972L9056P • Office w/ simult retraction 904 1,043L9070PL9080P••ClassroomStoreroom833 972L9080PELL9080PEU••Electrically lockedElectrically unlocked1,249 1,388L9456P • Corridor w/ deadboltL9453P • Entrance w/ deadbolt858 997L9485P* • Faculty Restroom 907 1,046L9496P • Privacy w/ deadbolt andOccupied Ind.907 1,046Keyed Double CylinderL9071P • Classroom Security $912 $1,051L9082PELElectrically lockedL9082PEUElectrically unlocked1,316 1,455* Specify door hand for faculty restroom locks. Faculty Restroom function locks are furnished 0-bitted with two6-pin keys unless otherwise specified. Emergency keys must be ordered separately.Notes:1) Split designs not available.2) Escutcheon trim is not available.3) Keying options: see Keys & Keying.4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information5) Add $76.00 for Vandlgard option. ( LV = Prefix )6) Tactile warning (Knurling) not available.7) Trim only available with complete lock.8) Must specify door hand for trim style 640.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-17

L • Complete LocksCommercial Lever SuitesCommercial Lever SuitesL-18Price Book 72AEffective July 18, 2011 • Rev. 7/11

L9000-Series Deadbolt Locks,L400-Series Deadbolt LocksComplete Locks • LL9000-Series Deadbolt LocksAnti-ligature Trim**Finishes605 606 609626 612 619 625 613 629 630 630Function Description 643eKeyedL9460P Single cylinder outside, turn inside $333 $339 $349 $751L9462P Double cylinder 404 410 420 606L9463P* Single cylinder outside, classroom turn inside 404 410 420 -L9464P Single cylinder outside, blank inside 275 281 291 379* Specify door hand.** Specify XL11-000, SK1. Not available in less cylinder or less components.Notes:1) Keying options: See Keys & Keying.2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more informationL400-Series Deadbolt LocksAnti-ligature Trim**Finishes605 606 609626 612 619 625 613 629 630 630Function Description 643eKeyedL460P Single cylinder outside, turn inside $220 $226 $236 $643L462P Double cylinder 259 265 275 467L463P* Single cylinder outside, classroom turn inside 259 265 275 -L464P Single cylinder outside, blank inside 213 219 229 320L496P L460 with “Occupied” indicator 318 324 334 -KeylessL480 Door bolt $184 190 $200 $608* Specify door hand.** Specify XL11-000, SK1. Available in FSIC and SFIC, not available in less cylinder or less components.Notes:3) Keying options: See Keys & Keying.4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more informationPrice Book 72AEffective July 18, 2011 • Rev. 7/11L-19

L • OptionsArmor Fronts and Strikes, L9000-SeriesArmor Fronts, L9000-Series1 1/4" Wide Square 1 1/16" Wide Add toDescription Corner, Standard Square Corner Lock PriceL9175, L9176 Blank 09-661 09-667L9010, L9040, L9044 Latch 09-662 09-668L9050, L9056, L9060, L9070, L9071, L9080, L9082, 09-663 09-669Latch x auxiliary latchL9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496, 09-664 09-670 N/CLatch x deadboltL9460, L9462, L9463, L9464, Deadbolt 09-665 09-671L9453, L9458, L9480, L9485, L9486,Latch x auxiliary latch x deadbolt09-666 09-672L9076, L9077, Latch x auxiliary latch (non-UL) 09-713 —Note:1) 1 1/16" Wide armor fronts are recommended for use on 1 3/8" thick doors.10-072Standard10-073Deadbolt StandardStrikes, L9000-SeriesAdd toDescription Lip Length Specify Lock Price1 1/4" x 4 7/8" Square corner, box, standard 1 3/16" 10-072 N/C1 1/4" x 4 7/8" Square corner, box7/8", 1", 1 1/2"10-072N/C1 3/4", 2" $23.20Deadbolt lock strike, L9460, L9462, L9463, L9464, standard — 10-073 N/C1/2" Rabbeted — 10-075* 80.60Strike frame reinforcer — 37-015 N/COne hole for latching functions, RH & LHR doors 1 3/16" XL11-820 ⧖ 9.90One hole for latching functions, LH & RHR doors 1 3/16" XL11-821 ⧖ 9.90⧖ Extended Factory Lead Time* For 1 3/4" thick doors, use with 1 1/16" wide armor fronts. For over 1 3/4" – 2 1/4" thick doors extended equally (EE), usewith 1 1/4" wide armor fronts.Shaded items are standard components and arefurnished with locks unless otherwise specified.L-20Price Book 72AEffective July 18, 2011 • Rev. 7/11

L400-Series Strikes, ADA ThumbturnOptions • L10-079Standard10-078Strikes, L400-SeriesAdd toDescription Specify Lock Price1 1/4" x 4 7/8" Square corner, box 10-0781 1/8" x 3 1/2" Square corner, box, standard 10-079 N/CANSI A115.5 preparationL583-363ADA Thumbturn(Rose trim shown)ADA ThumbturnDescription Specify Add to Lock PriceDisability turn (ADA) option Lock function and L583-363 (Previously XL11-800) $12.60Notes:1) Available with all thumbturn functions except L9463 and L463. For L463 and L9463 see special parts.2) ADA thumbturn must be ordered with 09-509, 09-633 or 09-634 as a complete unit. (See L-33 and L-36)3) Not available with anti-ligature knob (SK1, XL11-000 option) or anti-ligature lever (SL1, XL12-482 option).Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-21

L • OptionsFull Size Interchangeable Core, Small FormatInterchangeable Core, Lead LiningFull SizeInterchangeable CoreFull Size Interchangeable CoreFull Size Construction CoreAdd to Lock PriceDescription Specify (per core)Full size core*R suffixExample: L9050R $55.00Full size construction core**T suffixExample: L9050T 55.00Less full size coreJ suffixExample: L9453JN/C* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Use same price for F suffix. Locks are not availablewith 0-bitted interchangeable cores.** Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying for details.Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Not available with concealed cylinders.Small FormatInterchangeable CoreSmall Format Interchangeable CoreSmall Format Construction CoreAdd to Lock PriceDescription Specify (per core)Everest patented core* GD Suffix $62.00Example: L9050GDSmall format construction core** HD Suffix 34.00Example: L9050HDLess small format core BD Suffix N/CExample: L9050BDSmall format disposable core BDC Suffix N/CExample: L9050BDCNotes:(Everest ® patented core shown)* Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.3) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.4) Small format interchangeable cores are not available for Hotel functions (L9485, L9486).5) Not available with concealed cylinders.Lead LiningDescription Specify Add to Lock Price1/8" Thick lead plate installed on case cover, L9000 Lock function, door hand and XL11-515 ⧖ $264.001/8" Thick lead plate installed on case cover, L400 Lock function, door hand and XL12-216 ⧖ 264.00⧖ Extended Factory Lead TimeNotes: 6) Buyer should verify that this preparation meets local installation requirements or regulations.L-22Price Book 72AEffective July 18, 2011 • Rev. 7/11

Locks Less Components, Locks Less Lock CaseOptions • LLocks Less ComponentsDeduct fromDescription Specify Lock PriceLess each knob or lever LLL for knob/lever design $20.60Example: L9050P LLL/03A x 03ALess each rose or escutcheon LLL for rose/escutcheon design 20.60Example: L9050P 03A x 03A/LLLLess complete trim one side* LLL for complete trim outside 41.20Example: L9050P LLL x 03ALess full face cylinder (rose trim) L suffix 63.00Example: L9050L 03Aper cylinderLess full face cylinder L suffix 55.00Example: L9050L 03Lper cylinderLess concealed cylinder W suffix 55.00(L escutcheon only) Example: L9050W 03L per cylinderLess hotel cylinder (rose trim) L suffix, Faculty Restroom Function (L9485 or L9486) 94.00Example: L9485L 03ALess hotel cylinder L suffix, Faculty Restroom Function (L9485 or L9486) 88.00(escutcheon trim)Example: L9485L 03LLess armor front LLL for armor front 12.60Example: L9050P 03A 626 LLL 10-072Less strike LLL for strike 9.80Example: L9050P 03A 612 09-663 LLLLess complete trim both sides LLL for complete trim both sides Sum of applicableNote:Example: L9050L LLL 626 09-663 LLLLock case and armor front onlydeducts, use 06Adesign andspecified finish forbase price.* L283-150 furnished to mount inside trim when lock is ordered less outside trim for rose designs only. Add $26.70 per lock.1) L-Series locks ordered less all components are furnished as lock cases. See L Parts: Lock Cases.2) Not available with anti-ligature knob (SK1, XL11-000 option) or anti-ligature lever (SL1, XL12-482 option).Locks Less Lock Case (Knob to Lever Conversion Kits)Deduct fromFunction Specify Lock PriceL9010 $134.00L9040, L9044, L9440, L9444Function, design, finish, LLL for armor, LLL for strike and “less lockcase”Example: L9010 O3A 626 LLL LLL, less lock case167.00L9050, L9056, L9070, L9076, 226.00L9080L9453, L9456, L9465, L9473, Function less cylinder (use L suffix), design, finish, LLL for armor, 244.00L9480, L9485, L9486, LLL for strike, and “less lock case”L9486 “Occupied”, L9496 Example: L9050L O6L 613 LLL LLL, less lock caseL9060, L9071, L9077, L9082, 282.00L9457, L9466Notes:3) Locks less lock case are furnished less cylinder(s), armor front, and strike. Included are complete sets of outside andinside trim with spring cages, spindles, mounting screws and thru-bolts as required for the function specified.4) Deductions are applied to complete lock prices.5) Not available with SK1, XL11-000 anti-ligature knob trim or SL1, XL12-482 anti-ligature lever trim.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-23

L • OptionsNon-Standard Door Thickness, Primus ® , Request To ExitNon-Standard Door ThicknessFunctionSingle DoubleKeyless Cylinder CylinderDescription Specify Add to Lock Price1 3/8" Thick doors (not available with LV) 1 3/8" door* N/C N/C N/CExtended Inside (EI)Over 1 3/4" – 2 1/2" Extended Outside (EO)thick doors**Extended Equally (EE)N/C N/C N/CExtended Differently (ED) Door thickness and howOver 2 1/2" – 4" thick Extended Inside (EI) door is extended $76.30 $76.30 $373.00doorsExtended Outside (EO)Example: 2 7/8", EO76.30 373.00 373.00(for these thicknesses, must Extended Equally (EE) 76.30 373.00 667.00contact technical support forassistance)Extended Differently (ED) 76.30 373.00 667.00* 1 1/16" Wide armor fronts are recommended for use on 1 3/8" thick doors. See page L-16 to specify.** Cylinder may have to be ordered separately and additional charges may apply. See page CYL-46.Notes: 1) Price keyed locks furnished less cylinder(s) (L or W suffix) same as keyless.2) Locks are furnished extended equally (EE) unless otherwise specified.3) Locks with N Escutcheons are available only for 1 3/4" – 2 3/8" thick doors.4) L400-Series locks are available only for 1 3/4" – 3" thick doors extended equally (EE) at no additional charge.5) Locks with small format interchangeable core, suffixes BD, BDC, GD and HD are available only for 1 3/8" – 2 1/4" thickdoors extended equally (EE).6) L583-363 ADA thumbturn is only available for extended equally (EE) doors up to 2 1/8" thick for escutcheon trim and2 3/8" thick for rose trim.7) L9463 Function is only available for doors up to 3 5/8" thick extended equally (EE).8) LV option only available for 1 3/4" – 3" thick doors.9) Anti-ligature knob (SK1) and anti-ligature lever (SL1) only available on 1 3/4" thick doors.Primus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionSpecifyL-Series lock and full face Primus cylinder(s)Lock less full face cylinder (use L suffix). Order Primuscylinder(s) separately. See Cylinders.Example: 1 ea. L9080L 03A1 ea. 20-787L-Series lock and concealed Primus cylinder(s)Lock less concealed cylinder (use W suffix). Order Primuscylinder(s) separately. See Cylinders.Example: 1 ea. L9453W1 ea. 20-589L-Series lock and Primus full size interchangeable core Lock less full size core (use J suffix). Order Primus core(s)cylinder(s)separately. See Cylinders: Interchangeable Core.Example: 1 ea. L9466J2 ea. 20-740Note: 10) Primus is not available for Faculty Restroom function (L9485, L9486).Request to Exit (RX) Feature and Latch MonitoringAdd toFunctions Available Specify Lock PriceLocks available with Request to Exit (RX) feature.Functions L9010, L9050, L9070, L9071, L9076, L9077,L283-263$238.00L9080, L9080EL, L9080EU, L9082EL, L9082EU, L9056,L9060, L9496, L9453, L9456, L9457, L9485Locks available with Request to Exit (RX) feature.Functions LV9050, LV9070, LV9071, LV9076, LV9077,LV9080, LV9080EL, LV9080EU, LV9056, LV9060,LV9071, LV9453, LV9456, LV9457, LV9485Latch monitoring with RX (Request to exit) Must orderin addition to RX feature. Only available withL9080EL/EUNote: 11) Prices include RX.L-24L283-239XL12-245 for L9080PELXL12-246 for L9080PEU.Price Book 72AEffective July 18, 2011 • Rev. 7/11238.00443.00

Vandlgard Option, Tactile Warning, Tamper Resistant Torx ® Screws,Folger Adam Co ® Lever Trak Options • LTactile Warning(06 lever shown)Tactile Warning or KnurlingAdd to Lock PriceDescription Specify (per lever)Tactile Warning Preface lever design code with 8. $35.70803 for 03, 806 for 06, etc. Available on01, 03, 05, 06, 07, 12 and 17 lever designs.Notes:2) Tactile warning is applied to outside lever only unless otherwise specified.Tamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceArmor and strike screws for rose trim without Torx screws $13.90thumbturnArmor, strike, and thumbturn screws for rose trim Torx screws 14.60with thumbturn*Armor, strike, and mounting screws for L Torx screws 14.60Escutcheon trim (1 3/4" thick doors only)Armor, strike, and mounting screws for NEscutcheon trim (1 3/4" thick doors only)Torx screws and XL11-848 ⧖ 14.60⧖ Extended Factory Lead Time* For L9044 and L9444 specify Torx screws and L283-056. Add $6.10.** Not available with Anti-ligature knob (SK1) or anti-ligature lever (SL1).Folger Adam Co ® Lever Trak Description Specify Add to Lock PriceModified inside and outside 03 Lever forFolger Adam Co. ® Lever Trak 503 design(Available with rose trim only. Example: L9080P 503/03A $77.80Not available in 629 & 630 finishes)(Previously XL11-832)Anti-Ligature TrimDescription Specify RestrictionsAnti-Ligature Trim is intended for patient or For knob, SK1 for Only available for 1-3/4" door thicknessdetention applications. trim and XL11-000 Not available with torx screws, lock lessas optioncomponents, standard ADA thumbturn(L583-363), tactile or knurling, lock lessFor levers, SL1 for cylindertrim and XL12-482as optionFor mixedanti-ligature trim,specify both SK1and SL1 alongwith XL11-000and XL12-482as options.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-25

L • OptionsSpecial Options, Non-Standard FinishesSpecial Options⧖ Extended Factory Lead TimeNot subject to standard discount termsSpecifyDescription Lock Function “X” Number Add to Lock PriceSolid latchbolt (nylon insert), for use with electric strikes As required XL11-422 $51.70L9040 with thumbturn both sides (not available with L9040 XL11-446 57.00N Escutcheon trim).L9482* (L9082 with deadbolt). L9482 XL11-543 95.30Added to L9082L9485 prison function lock. Latch retracted by key outside or L9485 XL11-557 154.00knob inside. Outside knob always free-spinning. Deadbolt onlyAdded to L9485thrown or retracted by guardʼs key. Inside knob becomes fixedwhen deadbolt is thrown. Prisonerʼs key only retracts latchbolt.Furnished standard with Torx ® screws.L9460 with fixed double dummy trim. L9460 XL11-635 Same price as L9456L9463 or L463 with B100-Series style thumbturn. L9463/L463 XB11-720 29.90L9110 active double dummy trim. L9110 XL11-741 Same price as L9010Armor front with cutout to receive deadbolt only, for use with L9110, L9175, XL11-743 63.70dummy functions.L9176L9460 with trim. Inside knob or lever retracts deadbolt. L9460 XL11-886 Same price as L9456Outside knob or lever fixed.L9462 with trim. Inside knob or lever retracts deadbolt. L9462 XL11-886 Same price as L9082Outside knob or lever fixed.L9464 with trim. Inside knob or lever retracts deadbolt. L9464 XL11-886 Same price as L9456Outside knob or lever fixed.L9412 Exit lock with deadbolt for escutcheon designs only. L9412 XL11-907 Same price as L9080Special function, L9066 Store Lock, both levers locked or L9060 XL11-897unlocked by key in either lever.* Add $73.00 for Vandlgard option. ( LV = Prefix ).15.20Note:1) If you are unable to find your required hardware solution in this price book, please refer to our RFQ Form on page iv.Antimicrobial CoatingDescription of Components CoatedRose TrimA or BEscutcheon TrimL or NInside: Lever, Bushing, Rose, and ThumbturnOutside: Lever, Bushing, Rose, DeadboltInside: Lever, Bushing, Escutcheon, ThumbturnOutside: Lever, Bushing, Escutcheon, Face plateFinishes: 626AM or 630AMAdd to Lock Price$38.00Ordering notes for Antimicrobial Coatings:1) Extended Factory Lead Times Apply. Please place antimicrobial coated orders separately, and allow 30 daysfor manufacturing.2) Please specify 626AM or 630AM on each line item requiring antimicrobial coating.3) For ease of identification, a sticker will be applied to a non-visible location on product.4) For additional product finishes or styles, please use the RFQ Form.L-26Price Book 72AEffective July 18, 2011 • Rev. 7/11

Distributor Pack Program • LFeaturesThe Schlage Distributor Pack stocking program provides“flexible inventory” for the L-Series mortise lock. TheDistributor Pack combines the versatile Schlage mortiselock with a variety of knob or lever options and finishes allfor the same list price as a complete lockset. This allowsyou to maximize your mortise lock inventory dollars andmeet your changing customer requirements.The Distributor Pack is also easy to use. By combining afew different component parts, you can build a completeSchlage mortise lock.How to Build a Mortise Lock withthe Schlage Distributor PackSTEP 1: Choose lock case required. Schlage mortisecases must be ordered in multiples of 10 unitseach. (Quantity of 1 = 1 lock case.)STEP 2: Choose the knob/lever and rose/escutcheon trimdesigns and finishes. Order one design andfinish in multiples of 10 units each. (Quantity of1 = 1 set of outside and inside trim.)STEP 3: Choose the armor fronts and strikes required.Now that you have decided on the lock casefunction, trim designs, and finishes required,both armor fronts and strikes can be easilyadded. (Quantity of 1 = 10 armor fronts orstrikes. Packed 10 to a box.)STEP 4: Choose cylinder option. If the lock functionsordered require cylinders, you must add theappropriate quantity of cylinders to your order.(Quantity of 1 = 10 cylinders. Packed 10 to abox.)These are the only component parts required to build aSchlage mortise lock. With four easy steps you can buildyour mortise inventory to be flexible and to respond quicklyto your customers.Miscellaneous parts in bulk quantities are also available forSchlage mortise locks with the Distributor Pack Program.(See page L-31 for availability.)Product IdentificationFunctions AvailableFunction DescriptionL9010B PassageL9040B PrivacyL9050LB OfficeL9070LB ClassroomL9080LB StoreroomL9453LB EntranceL9456LB CorridorL9465LB Closet/StoreroomL9473LB Dormitory/BedroomSuffixB = Distributor Pack Lock CaseL = Less Full Face CylinderDesigns and Finishes AvailableRose orKnob/Lever EscutcheonDesigns Designs Finishes03, 06, 07, 12, 17, A, B, or L 605, 606, 612,41, 42, 18, 613, 625, 626,OME 629, 630Pricing and DiscountingDistributor Pack Program lock cases, trim sets, armorfronts, strikes, cylinders, and miscellaneous parts willreceive the same discount as applied to L-Series locks.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-27

L • Distributor Pack ProgramLock CasesSTEP 1: Choose lock case.Lock CasesOrder in multiples of 10VandlgardPriceFunction Option Available Description EachL9010B Passage $123.00L9040B • Privacy 180.00L9050LB • OfficeL9070LB • Classroom 199.00L9080LB • StoreroomL9453LB • EntranceL9456LB • CorridorL9465LBCloset/Storeroom224.00L9473LBDormitory/BedroomNotes:1) Distributor Pack lock cases must be ordered with B suffix.2) Order lock cases less cylinder, design, finish, latch, and strike.3) Lock cases must be ordered in multiples of 10 per each lock function.(Quantity of 1 = 1 lock case.)4) Lock cases are furnished with mounting screws and templates only.5) Lock cases are furnished right hand only.6) Lock trim, armors, strikes and cylinders must be ordered separately.7) Add $76.00 for Vandlgard option. ( LV = Prefix )L-28Price Book 72AEffective July 18, 2011 • Rev. 7/11

Outside and Inside Trim SetsDistributor Pack Program • LSTEP 2: Choose knob/lever and rose/escutcheon trim designs and finishes.Distributor Pack Program L-Series (A or B Rose Trim Sets)Lever or Knob StylesStandard Leadtime:03 06 07 03 06 07 12 1712 17 OMEOME⧖ Additional Leadtime:Please order in multiples of 10 18 41 42Prices shown are per lock bodyFinishes626 626 605 606 613Distributor 609 612 629Pack 619 625 630Function Number Part Number 643eL9010, L9070, L9080, L9465 09-454 $271 $364 $376 $394L9040 09-455 279 383 395 413L9050, L9453, L9456, L9473 09-456 272 366 378 396* Specify door hand for 12 leverNotes:1) Trim sets must be ordered in multiples of 10 units per design and finish. (Quantity of 1 = 1 set of outside and inside trim.)2) Split designs and/or finishes are not available.3) Outside and inside trim sets include mounting screws, mounting plate, spring cages, and strike box. Order mountingposts (page L-31) as appropriate for either L or LV function.4) Components are for 1 3/4" thick doors only.Distributor Pack Program L-Series (L Escutcheon Trim Sets)Lever or Knob Design and FinishesPlease order in multiples of 10Standard Leadtime: 03 06 07 12 17 OMEPrices shown are per lock body ⧖ Additional Leadtime: 18 41 42Distributor 626 605 606 609Pack 612 619 625 613 629Function Number Part Number 643e 630L9010 09-446 $400 $412 $430L9040 09-447 410 422 440L9070, L9080, L9465 09-449L9050, L9453, L9456, L9473 09-451395 407 425* Specify door hand for 12 leverNotes: 5) Trim sets must be ordered in multiples of 10 units per design and finish. (Quantity of 1 = 1 set of outside and inside trim.)6) Split designs and/or finishes are not available.7) Outside and inside trim sets include mounting screws, mounting plate, spring cages, and strike box. Order mountingposts (page L-31) as appropriate for either L or LV function.8) Components are for 1 3/4" thick doors only.9) Concealed cylinder escutcheons are not available in the Distributor Pack Program.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-29

L • Distributor Pack ProgramArmor Fronts, Strikes, Cylinders,Cylinder Length RequirementsSTEP 3: Choose armor fronts and strikes.Armor Fronts — 1 1/4" Wide Square CornerDistributor Pack Part PriceDescription Number (box of 10) (per box)10 each 09-662 for L9010, L9040, latch 09-47310 each 09-663 for L9050, L9070, L9080, latch x auxiliary latch 09-47410 each 09-664 for L9456, L9465, L9473, latch x deadbolt 09-475$245.0010 each 09-666 for L9453, latch x auxiliary latch x deadbolt 09-477Notes: 1) Specify finish.2) Mounting screws are included with armor fronts.StrikesDistributor Pack Part PriceDescription Lip Length Number (box of 10) (per box)1"10 each 10-072, 1 1/4" X 4 7/8", Square corner, no box 1 3/16" 09-494 $149.001 1/2"Notes:3) Specify finish and lip length. 1 3/16" lip strike will be furnished unless otherwise specified.4) Strike box included with Distributor Pack trim sets.STEP 4: Choose cylinders.CylindersCylinder Distributor Pack Part PriceDescription Length Number (box of 10) (per box)1 1/8"20-001 1 1/4" 09-48410 each Standard full face mortise 1 3/8"cylinders with compression rings 1 1/8"$630.0030-001 1 1/4" 09-4851 3/8"Notes:5) Specify finish, key section and cylinder length. 1 1/8" long cylinders in C keyway will be furnished unless otherwisespecified.6) Cylinders are 5-pin furnished with two 5-pin 0-bitted keys.L-Series Cylinder Length RequirementsCylinder LengthDoor Thickness Rose Trim Escutcheon Trim1 3/8" 1 1/8" 1 1/8"1 3/4" 1 1/8" 1 1/4"2" 1 1/8" 1 3/8"L-30Price Book 72AEffective July 18, 2011 • Rev. 7/11

Escutcheon Thru-Bolts, Mounting Posts,Mounting ScrewsDistributor Pack Program • LThese miscellaneous parts in bulk quantities may be ordered under the Distributor Pack Program. Part numbersrepresent bulk quantities as shown below.Escutcheon Thru-BoltsDistributor PackPart NumberPriceDescription (box of 50) (per box)50 each L Escutcheon thru-bolts 09-483 $203.00Notes: 1) Specify finish.2) Specify door thickness: 1 3/8", 1 3/4", 2", 2 1/4", or 2 1/2".3) Escutcheon thru-bolts are packed 50 units to a box.(Quantity of 1 = box of 50 thru-bolts.)Mounting PostsDistributor PackPart NumberPriceDescription (box of 50) (per box)50 each Mounting posts for L 09-488 $406.0050 each Mounting posts for LV Contact Technical SupportNotes: 4) Specify door thickness: 1 3/8", 1 3/4", 2", 2 1/4", or 2 1/2".5) Mounting posts are packed 50 units to a box.(Quantity of 1 = box of 50 mounting posts.)6) LV mounting posts are required for all Vandlgard ® applications. See page L-37.Mounting ScrewsDistributor PackPart NumberPriceDescription (box of 100) (per box)100 each Mounting screws (L583-066) 09-493 $31.20Note: 6) Mounting screws are packed 100 units to a box.(Quantity of 1 = box of 100 mounting screws.)Price Book 72AEffective July 18, 2011 • Rev. 7/11L-31

L • PartsLock Trim: Levers, Knobs, RosesLeversDesigns and Finishes01⧖ 02⧖ 05⧖ 03** 06 0718 12* 17 OME † AST* ACC LAT***MER* STA LON***605 605606 612 613 619Part 619 625 629 625Number Description 626 643e 630 62609-401 Outside lever09-402 Inside lever & bushing$114.00 $126.00 $130.00 $145.00⧖ Extended Factory Lead Time* When ordering levers as parts, specify hand of lever.** Available modified for Folger Adam Co. ® Lever Trak . Specify 503 design and add $37.30. Not available in 629 and 630 finishes.*** LAT and LON not available in 605.Note:Knobs1) Specify part number, complete design application, and finish.Example: 09-401 03A 626, outside 03 lever for use with an A Rose.Designs and Finishes41⧖ 42⧖613Part 605 606 612 629Number Description 626 619 625 643e 63009-401 Outside knob09-402 Inside knob & bushing$80.30 $92.30 96.30⧖ Extended Factory Lead TimeNote: 2) Specify part number, complete design application, and finish.Example: 09-402 42L 605, inside 42 knob for use with an L Escutcheon.RosesDesigns and FinishesA B MER AVA605 605606 606612 612 605619 619 619Part 625 625 625Number Description 626 643e 613 626 643e 613 626 643e09-403 Inside rose $62.00 $64.00 $66.00 $70.90 $72.90 $74.90 $88.40 $90.4009-404 Outside rose & bushing 67.20 69.20 71.20 78.30 80.30 82.30 96.90 98.9009-508 Blank outside rose 83.50 85.50 87.50 87.00 89.00 91.00 – –Note:3) Specify part number, complete design application, and finish.Example: 09-403 03B 625, inside B rose for use with an 03 lever.L-32Price Book 72AEffective July 18, 2011 • Rev. 7/11

Lock Trim: Outside and Inside L and N EscutcheonsParts • LL EscutcheonsFinishes605 606 613Part 612 619 629Number Description 626 625 643e 630Outside Escutcheon & Bushing09-636 Blank x knob or lever09-637 Emergency turn x knob or lever09-638 Concealed cylinder x knob or lever$131.00 $137.00 $147.0009-639 Full face cylinder x knob or lever09-640** Concealed cylinder x occupancy indicator x knob or lever09-641** Full face cylinder x occupancy indicator x knob or lever142.00 148.00 158.00Inside Escutcheon09-632 Blank x knob or lever09-633* Thumbturn x knob or lever09-634* Thumbturn x blank $128.00$134.00$144.0009-635 Full face cylinder x knob or leverL583-187 Concealed cylinder x knob or lever* Specify door thickness: 1 3/8" or 1 3/4". Available with disability turn (ADA) option. Specify L583-363 and add $12.10.** Available with “Occupied” indicator option. Specify with L583-375 and add $14.00.Notes:1) Specify part number, complete design application and finish. Design not required for L583-187.Examples: 09-636 03L 626, outside L Escutcheon for use with an 03 lever.09-633 AST/00L, inside L Escutcheon for use with AST lever.2) For special escutcheons, see Special Parts.3) Thru-bolts are furnished with inside escutcheons, except L583-187.N EscutcheonsFinishes605 606 613Part 612 619 629Number Description 626 625 643e 630Outside Escutcheon & Bushing09-636 Blank x knob or lever09-637 Emergency turn x knob or lever $97.00 $103.00 $113.0009-639 Full face cylinder x knob or leverInside Escutcheon09-632 Blank x knob or lever09-633* Thumbturn x knob or lever $93.00 $99.00 $109.0009-635 Full face cylinder x knob or lever* Specify door thickness: 1 3/8" or 1 3/4". Available with disability turn (ADA) option. Specify L583-363 and add $12.10.Notes:4) Specify part number, complete design application and finish.Example: 09-636 42N 626, N Escutcheon for use with a 42 knob.5) For blank N Escutcheons, see Special Parts.6) Thru-bolts are furnished with inside escutcheons.Price Book 72AEffective July 18, 2011 • Rev. 7/11L-33

L • PartsOutside Knob/Lever and Rose/EscutcheonAssemblies, Armor FrontsOutside Knob/Lever and Rose/Escutcheon AssembliesDesigns and Finishes01⧖ 02⧖ 03 05⧖ 06AST*07 12* 17 18 OME † 41⧖ 42⧖ MER*605 606 605612 619 613 606 612 605Part 625 629 625 629 619 625Number Description 626 643e 630 626 643e 630 626 643eWith A Rose09-506 — $128.00 $140.00 $144.00 $128.00 $140.00 $144.00 — —09-655 — — — — — — — $152.00 $164.00With B Rose09-506 — $128.00 $140.00 $144.00 $128.00 $140.00 $144.00 — —09-655 — — — — — — — — $164.00With L Escutcheon09-550 Blank09-551 Emergency turn09-552 Concealed cyl.09-553 Full face cyl.$170.00 $182.00 $186.00 $170.00 $182.00 $186.00 $184.00 $196.0009-554** Concealed cyl. w/indicator09-555** Full face cyl. w/indicatorWith N Escutcheon09-550 Blank09-551 Emergency turn $152.00 $164.00 $168.00 $152.00 $164.00 $168.00 —09-553 Full face cyl.⧖ Extended Factory Lead Time* Specify hand of lever.** Available with “Occupied” indicator. Specify with L583-375 and add $14.00.Notes:1) Specify part number, complete design application and finish.Armor Fronts, L9000-Series1 1/4" Wide, Specify Pricestandard 1 1/16" Wide Finish Description Each09-661 09-667 • L9175, L9176, Blank09-662 09-668 • L9010, L9040, L9044, Latch09-663 09-669 • L9050, L9056, L9060, L9070, L9071, L9080, L9082, Latch x auxiliary latch09-664 09-670 • L9444, L9456, L9457, L9465, L9466, L9473, L9496, Latch x deadbolt $24.5009-665 09-671 • L9460, L9462, L9463, L9464, Deadbolt09-666 09-672 • L9453, L9458, L9480, L9485, L9486, Latch x auxiliary latch x deadbolt09-713 — • L9076, L9077, Latch x auxiliary latch (non-UL)Note:3) 1 1/16" Wide armor fronts are recommended for use on 1 3/8" thick doors.Armor Front, L400-Series1 1/4" Wide, Specify Pricestandard Finish Description Each09-717 • L460, L462, L463, L464, L480, L496 Deadbolt $24.50L-34Price Book 72AEffective July 18, 2011 • Rev. 7/11

StrikesParts • L10-072 10-073 10-091Strikes, L9000-SeriesPart Specify Lip PriceNumber Finish Description Length Each10-072* • 1 1/4" x 4 7/8" Square corner, box, standard 1 3/16" $14.9010-072* • 1 1/4" x 4 7/8" Square corner, box7/8", 1", 1 1/2" 14.901 3/4", 2" 38.0010-073 • Deadbolt lock strike, L9460, L9462, L9463, L9464, standard — 18.2010-075** • 1/2" Rabbeted — 98.3010-091*** • 1 1/4" x 8" Square corner, armor strike, no box 1 3/16" 66.40K510-066 Strike box — 4.9037-015 Door frame strike reinforcer — 16.50* Specify lip length.** For 1 3/4" thick doors, use with 1 1/16" wide armor fronts. For over 1 3/4" – 2 1/4" thick doors extended equally (EE), usewith 1 1/4" wide armor fronts.*** Specify hand of inactive door.Note:1) For special strikes, see Special Parts.10-078 10-079Strikes, L400-SeriesPart Specify PriceNumber Finish Description Each10-078 • 1 1/4" x 4 7/8" Square corner, box10-079 • 1 1/8" x 3 1/2" Square corner, box, standard $14.90ANSI A115.5 preparationK510-053 Strike box for 10-079 strikeK510-066 Strike box for 10-078 strike5.00Price Book 72AEffective July 18, 2011 • Rev. 7/11L-35

L • PartsButtons, Thumbturns & Coin Turns, Cylinder Turns,Occupancy IndicatorsK510-330 09-509 09-509 L283-124Buttons, Thumbturns & Coin TurnsPart Specify PriceNumber Finish Description EachK510-330 • Emergency button, L9040 and L9440 $10.10L583-233 458 Emergency turn, L9040 and L9440 12.7009-509* • Thumbturn for rose trim 46.00L283-124** • Coin turn, L9044 and L9444 81.30L283-056** • Coin turn with Torx screws, L9044 and L9444 88.20* Specify dimension for 09-509 thumbturn. See chart below for dimensions. Available with disability turn (ADA) option for1 3/8" – 1 7/8" thick doors. Specify L583-363 and add $12.10.** Specify dimensios for L283-124 and L283-056.09-900 Dimension Chart: 09-509 ThumbturnPart Number Door Range Dim1 3/8" – 1 7/8" 02709-509 over 1 7/8" – 2 3/8" 033over 2 3/8" – 2 7/8" 040over 2 7/8" – 3 5/8" 047Cylinder TurnsPart Specify PriceNumber Finish Description Dimension Each09-900 • Classroom turn 1 1/8", 1 1/4", 1 3/8" $79.001 1/2", 1 5/8", 1 3/4" 122.0009-904 • Classroom turn with compression ring 1 1/8", 1 1/4", 1 3/8" 86.001 1/2", 1 5/8", 1 3/4" 129.0009-905 • Classroom turn with compression ring and 1/8" blocking 1 1/8" 94.40ring, 1 3/4" doors09-907 • Classroom turn with compression ring and 1/4" blocking 1 1/8" 94.40ring, 1 3/8" doorsNotes:with ADA thumbturn(L583-363)1) Specify dimension for cylinder turns, and door hand if for use with L463 or L9463. If handing is not required, specifyNH (non-handed).2) For special cylinder turn, see Special Parts.3) Not available in 629 and 630 finish.Occupancy IndicatorsPart Specify PriceNumber Finish Description Each09-611 • Occupancy indicator for rose trim reading “DO NOT DISTURB”, $75.50includes the L583-245 driver barL583-245 Occupancy indicator driver bar sold separate 3.80Note: 4) Available with “Occupied” indicator option. Specify with L583-375 and add $14.00.5) Available with lock indicator function. Specify with XL11-986 and add $14.00.L-36Price Book 72AEffective July 18, 2011 • Rev. 7/11

Escutcheon Thru-Bolts, Mounting Posts,Spindles & Springs, Electrified Lock KitsParts • LEscutcheon Thru-BoltsPart Specify Door PriceNumber Finish Description Thickness EachL583-119 • 1 3/8"L583-120 • 1 3/4"L583-121 • L Escutcheon thru-bolts 2"$4.10L583-122 • 2 1/4"L583-123 • 2 1/2" 4.40K510-389 •N Escutcheon thru-bolts1 3/4"4.80K510-390 • 2" – 2 1/4"L583-133 • N Escutcheon mounting screws, L0170 single dummy — 3.70Note:1) Two required per lock.Mounting PostsPartPriceNumber Door Thickness EachL583-211 1 3/8"L583-212 1 3/4"L583-213 2"L583-214 2 1/4" $8.10L583-215 2 1/2"L583-216 2 3/4"L583-217 3"L583-218 3 1/4"L583-219 3 1/2"20.90LV Mounting PostsPartPriceNumber Door Thickness EachL583-497 1 3/4"L583-498 2"L583-499 2 1/4" $16.10L583-500 2 1/2"L583-501 2 3/4"L583-502 3"L583-503 3 1/4" 21.60L583-504 3 1/2"Note: 2) Two required per lock. Note: 3) LV mounting posts are required for all Vandlgard ®applications.Spindles and SpringsPartPriceNumber Description EachL283-060* Spindle & spring, 1 3/8" – 1 7/8" $5.20doorsL283-061* Spindle & spring, 2" – 3 1/2" doors 6.60L283-064 Spindle & spring, L0172 double 9.40dummyL283-065 Spindle & spring, L0170 single 5.00dummy* Two required per lock.Spindle and Spring KitWhen ordered SEPARATELY from locks.Parts PriceL283-198 (2) Spindles & springs, for 1-3/8" - 1-7/8" doors $10.40L283-199 (2) Spindles & springs, for 2" - 3-1/2" doors 12.50Electrified LockPartPriceNumber Description EachL283-053 Solenoid and diode, EL or EU $321.00Price Book 72AEffective July 18, 2011 • Rev. 7/11L-37

L • PartsLock CasesPartPriceNumber Lock Function and Description EachL283-039L9076, Classroom holdbackL9077, Classroom security holdback$246.00L283-062L9440, Privacy with deadboltL9444, Privacy with deadbolt and coin turn222.00L283-085 L9082 EL, Electrically locked 797.00L283-086 L9082 EU, Electrically unlocked 797.00L283-099 L460, L462, L463, L464, L480, L496, Deadbolt 149.00L283-126 L9056, Entrance w/ simultaneous retraction 246.00L283-131 L9010, Passage 141.00L283-132L9040, PrivacyL9044 Privacy with Coin turn209.00L9050, OfficeL283-133L9060, Apartment entranceL9070, Classroom246.00L9071, Classroom securityL283-134 L9080, Storeroom 246.00L283-137 L9453, Entrance 271.00L9456, CorridorL283-138 L9457, Classroom security 271.00L9496, Privacy w/ “Occupied” indicatorL283-139 L9460, L9462, L9463, L9464, Deadbolt 186.00L9465, ClosetL283-140 L9466, Storeroom 271.00L9473, DormitoryL9480, Storeroom with deadboltL283-141 L9485, Faculty Restroom 340.00L9486, Faculty RestroomL283-142 L9080 EL, Electrically locked (Fail Safe) 797.00L283-143 L9080 EU, Electrically unlocked (Fail Secure) 797.00L283-144 L9175, Single dummy 211.00L283-145 L9176, Double dummy 211.00L283-146 L9082, Institution 246.00L283-310 L9458, Classroom security w/ deadbolt and aux latch 271.00Note: 1) Includes lock case only. Armors, strikes, mounting screws, and cylinders must be ordered separately.2) All lock cases are shipped right hand.LV Lock CasesPartPriceNumber Lock Function and Description EachL283-170 LV9050, Office and Inner Entry LockLV9060, Apartment Entrance Lock$308.00LV9070, Classroom LockLV9071, Classroom Security LockL283-171 LV9040, Bath/Bedroom Privacy LockLV9044, Privacy Lock With Coin Turn Outside271.00L283-172 LV9076, Classroom Holdback LockLV9077, Classroom Security Holdback Lock308.00L283-173 LV9080, Storeroom Lock 308.00L283-174 LV9080EL, Electrically Locked (Fail Safe) 832.00L283-175 LV9080EU, Electrically Unlocked (Fail Secure) 832.00L283-176 LV9453, Entrance Lock 332.00L283-177 LV9456, Corridor LockLV9457, Classroom Security Lock 332.00LV9496, L9486 Lock With "OCCUPIED" IndicatorL283-178 LV9480, Storeroom Lock With DeadboltLV9485, Faculty Restroom 397.00LV9486, Faculty Restroom w/"Do Not Disturb" IndicatorL283-180 LV9056, L9050 Lock With Simultaneous Retraction 308.00L283-181 LV9440, Privacy Lock With DeadboltLV9444, Privacy Lock With Deadbolt and Coin Turn Outside284.00L283-182 LV9082, Institution Lock 308.00L283-310 w/ deadbolt and aux latch LV9458, Classroom security 332.00Lock CasesL-38Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous PartsParts • LMiscellaneous PartsPartPriceNumber Description Each36-080 O-ring, L9080 EL/EU $2.0039-042 Plastic lock case cover for display - for locks manufactured after January, 1998 62.80K110-550 Pack of truarc ring (1), spacer (2), knobs 5.60K510-320 Wood plug, dummy, L0170, L0172 5.80K510-842 Electrified lock bushing, L9080 EL/EU .74L283-003 Deadbolt (except L9453, L9465, L9466, L9473) 38.30L283-004 Entrance deadbolt, L9453 38.30L283-006 Auxiliary latchbolt assembly 12.10L283-008 Latchbolt assembly (except L9076) 38.30L283-010 Locking link, L9076 12.40L283-029 (2) Spacers for ANSI A115.1 metal door preparations 24.50L283-030 Pack of 20 truarc rings, levers 14.40L283-031 Mounting plate, inside lever 13.30L283-040 Spring cage (1 required per lever) 6.60L283-049 Latchbolt assembly, L9076 38.30L283-055 Cylinder retainer plate and screw - for locks manufactured after April, 1994 12.10L283-057 (2) Mounting Post, (2) Screws, L-series, OSU 19.00L283-075 Deadbolt, L9465, L9466, L9473 38.40L283-112 Lock case, L9000-Series - for locks manufactured after January, 1998. 38.40L283-127 Lock case and cover, L400-Series 55.10L283-128 Lock case, L400-Series. See L283-127 for sellable part. —L283-150 Mounting plate for inside rose trim on one side of door only 26.70L583-004 Standoff post 1.50L583-015 Latchbolt guide 2.50L583-019 Retractor hub (2 required per lock) 5.70L583-020 Retractor hub spacer 3.00L583-021 Retractor lever 2.60L583-022 Retractor rocker 2.00L583-023 Blocking plates 2.50L583-024 Retractor link 5.20L583-025 Retractor crank 5.20L583-026 Hub spring 1.10L583-027 Fire door fuse 1.50L583-028 Fire door catch 2.00L583-029 Turn hub 13.00L583-030 Entrance hub 18.20L583-031 Cam follower 7.10L583-035 Turn hub spring 2.50L583-038 Auxiliary bar guide 1.90L583-043 Locking catch, L9080 EL/EU 13.00L583-044 Stop spring 1.20L583-045 Locking catch (except L9080 EL/EU) 13.30L583-047 Catch spring 3.00L583-048 Locking link (except L9076) 3.00L583-049 Entrance link 5.00L583-050 Link pin $1.20L583-051 Transfer lever 1.20L583-053 Simultaneous retractor (except L9040 and L9056) 5.20L583-056 Catch pin 2.60L583-057 Spindle anchor 20.80L583-058 Simultaneous retractor, L9040, L9056 5.50L583-063 Spring retainer, L9080 EL/EU 5.70L583-064 Solenoid spring, L9080 EL/EU 1.80Price Book 72AEffective July 18, 2011 • Rev. 7/11L-39

L • PartsMiscellaneous Parts (continued)Miscellaneous Parts (cont’d)PartPriceNumber Description EachL583-065 Electrified link, L9080 EL/EU $8.00L583-066 Mounting plate screw (2 required per lock) 0.90L583-156 Transfer lifter 4.90L583-174 Holdback dog, L9076 4.10L583-192 Dog spring, L9076 0.40L583-196 Auxiliary stop 4.00L583-286 Mounting bar, L0170, L0172 16.10L583-290 Mounting plate screw, knob dummy trim, L0170, L9175 1.00L583-291 Mounting plate screw, lever dummy trim, L0170, L9175 1.00L583-321 Mounting plate, inside knob 4.90L583-322 Spacer for fixed levers 2.60L583-426 Faceplate tab 1 1/4" - for locks manufactured after July, 1994 3.50L583-427 Faceplate tab 1 1/16" - for locks manufactured after July, 1994 4.00L583-454 Case cover screw (4 required per L9000-Series lock case; 3 required per L400-Series lock case) 1.00L583-468 Dummy spindle anchor 88.70L583-481 Cylinder retainer screw - for locks manufactured after April, 1994 1.80L583-485 Lock handing screw - for locks manufactured after April, 1994 1.10L583-490 Cylinder retainer - for locks manufactured after January, 1998 4.70L583-492 Cylinder retainer screw plate - for locks manufactured after April, 1994 2.30L583-494 Lock case cover, L400-Series. See L283-127 for sellable part. 17.00L583-496 Lock case cover, L9000-Series - for locks manufactured after January, 1998 17.00Anti-Ligature Conversion Kits - for 1-3/4" thick doors onlyPart Conversion PriceNumber Converts Contents Instructions EachConvert to Anti-Ligature Knob09-155 L9010, L9060, L9070, L9071, L9076, (2) anti-ligature knob assemblies$827.00L9077, L9080, L9080EL, L9080EU, L9082, (2) anti-ligature blocking ringsL9082EL, L9082EU, L9176, L9457, L9458,L9465, L9466, L9482, to anti-ligature09-156 L9050, L9056, L9412, L9453, L9456, L9460 (2) anti-ligature knob assemblies Seew/ pull, L9473, L9480, L9485, to anti-ligature (1) anti-ligature blocking ring instruction$1,035.00(1) anti-ligature thumbturn assembly sheet09-159 L9040, L9440 to anti-ligature(2) anti-ligature knob assemblies$1,035.00(1) anti-ligature thubturn assembly(1) emergency ADA turn(1) emergency buttonConvert to Anti-Ligature Lever09-138 L9010, L9060, L9070, L9071, L9076,L9077, L9080, L9080EL, L9080EU, L9082,L9082EL, L9082EU, L9176, L9457, L9458,L9465, L9466, L9482, to anti-ligature(2) anti-ligature lever assemblies(2) anti-ligature blocking rings(2) trim ferrules$1,077.0009-139 L9050, L9056, L9412, L9453, L9456, L9460 (2) anti-ligature lever assemblies See $1,285.00w/ pull, L9473, L9480, L9485, to anti-ligature(1) anti-ligature blocking ring(1) anti-ligature thumbturn assembly(2) trim ferrules09-189 L9040, L9440 to anti-ligatureanti-ligature lever assemblies(1) anti-ligature thubturn assembly(1) emergency ADA turn(1) emergency button (2) trim ferrulesDeadbolt conversion to anti-ligature09-157 L462, L464, L9462, L9464 to anti-ligature (2) anti-ligature blocking rings09-1578 L460, L480, L9460 to anti-ligature(1) anti-ligature blocking ring(1) anti-ligature thumbturn assemblyinstructionsheet$1,285.00$99.00515.00Notes:L-401) For 1 3/4" doors w/ sectional trim only2) Available in 630 (Satin Stainless Steel) or 630AM (Satin Stainless Steel Anti-Microbial) finish only3) If applicable please specify "P" for (P) cylinder types, "R" for (R,J,F,T) cylinder types, and "BD" for (BD, BDC, GD, HD)cylinder types following the part number. Not available with the "L" cylinder option (lock less cylinder).Price Book 72AEffective July 18, 2011 • Rev. 7/11

Classroom Security Function Conversion KitsVandlegard Retrofit kitParts • LClassroom Security Function Conversion KitsPartPriceNumber Converts Contents Conversion Instructions EachRose Trim38-090 L9070P to L9071P (1) 30-001-118 Cylinder Add cylinder and 1 blocking ring $79.40L9076P to L9077P (2) 36-082-018 Blocking Ring to inside. Add 1 blocking ring to outside.38-091 L9070R to L9071R (1) 30-008 Cylinder Add cylinder and 1 blocking ring 127.00L9076R to L9077R (2) 36-082-050 Blocking Ring to inside. Use 1 blocking ring to replace38-092 L9070BD to L9071BD (1) 80-108 Cylinder existing outside blocking ring. 79.40L9076BD to L9077BD (2) 36-082-050 Blocking RingL Escutcheon Trim38-093 L9070P to L9071P (1) 30-001-118 Cylinder Replace existing inside escutcheon. $177.00L9076P to L9077P (includes Compression Add cylinder and compression springSpring and Ring)only to inside. Add compression ring(1) 36-082-012 Blocking Ring only to outside.*(1) 09-635 Escutcheon38-094 L9070R to L9071R (1) 30-008 Cylinder Replace existing inside escutcheon. 177.00L9076R to L9077R (1) 36-082-012 Blocking Ring Add cylinder and blocking ring to inside.(1) 09-635 Escutcheon38-095 L9070BD to L9071BD (1) 80-108 Cylinder Replace existing inside escutcheon. 127.00L9076BD to L9077BD (1) 09-635 Escutcheon Add cylinder to inside.* Also add blocking ring to outside of 1 5/8” doors. Use compression spring only on outside of 1 7/8” doors.Notes: 1) Specify finish and keying.2) Subject to same discount as L-Series Locks.3) Use of these kits requires drilling hole in door for inside cylinder.Vandlgard Retrofit Kit - Specify door thickness (1 3/4" - 3 5/8") when orderingPart Conversion PriceNumber Converts Contents Instructions Note Each39-034 L to LV (1) L283-200 Mounting Post Pack(1) L583-345 Catch RetractorL9040L9044L9440L9444L9050L9056L9070L9076L9080L9453L9456L9480L9485L9486L9496L9060L9071L9077L9082L9457(1) L283-147 Retractor Assembly(1) L583-383 Crank Retractor For first time users, and L9486(1) L583-386 Bottom Hub functions, $42.10(1) L583-387 Top Hub(1) P515-528 Handing Label(1) P515-683 Instruction SheetPlease refer toinstruction sheet.an instructionalvideo is available.For L9080,L9480, L9485add to kit(1) L283-040Spring Cage.39-234 L9082 and L9482 to (1) L283-200 Mounting Post PackPlease refer to Add to kitLV9082 and LV9482 (1) L583-346 Spacer 38.60instruction sheet. (2) L283-040(1) L583-386 Bottom HubFor first time users, Spring Cages(1) L583-387 Top Huban instructional(1) P515-528 Handing Labelvideo is available.(1) P515-683 Instruction SheetMiscellaneous PartsPartPriceNumber Description EachL283-040 Spring Cage (1 required per lever) $6.60Price Book 72AEffective July 18, 2011 • Rev. 7/11L-41

L • PartsStandard Screw Packs, Torx ® Screw Packs,Special PartsScrew Packs, StandardPart Specify PriceNumber Finish Description Contents EachC203-736 455 Lock case mounting (2) C603-256, #12-24 WMS PFHC203-736 • Strike Screws (2) C603-256, #12-24 WMS PFH$4.50K110-020 • Armor mounting (2) K510-210, #8-32 x 1/4" PFHMS .56K110-947 • Rose trim thumbturn screw pack (2) K510-445, #4 x 1/2" POH AB 5.30L283-100 Trim mounting screws and (2) L583-066, #8-32 x 1/2" PFH 19.00posts, 1 3/4" doors(2) L583-212, 1 3/4" Mounting PostsL283-101 • L Escutcheon thru-bolts, 1 3/4" (2) L583-120 7.40doorsScrew Packs, Torx ®Part Specify PriceNumber Finish Description Contents EachL283-121 • Rose trim without thumbturn (2) Armor screws, #8-32 x 1/4" (T-15) $13.90(2) Strike screws, #12-24 x 1/2" (T-20)L283-123 • L Escutcheon trim for 1 3/4" (2) Armor screws, #8-32 x 1/4" (T-15) 14.60doors(2) Strike screws, #12-24 x 1/2" (T-20)(2) Esc. mtg. screws, 1/4- 28 x 2 1/8" (T-30)L283-122 • Rose trim with thumbturn (2) Armor screws, #8-32 x 1/4" (T-15) 14.60(2) Strike screws, #12-24 x 1/2" (T-20)(2) Thumbturn screws, #4 x 1/2" (T-8)XL11-848*⧖ • N Escutcheon trim for 1 3/4" (2) Armor screws, #8-32 x 1/4" (T-15) 14.60doors⧖ Extended Factory Lead Time* Not subject to standard discount terms.Note: 1) Torx screw packs are furnished with appropriate T-xx installation tools.Special Parts(2) Strike screws, #12-24 x 1/2" (T-20)(2) Esc. mtg. screws, #8-32 x 1 1/2" (T-20)⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Description EachXL11-422 Solid latchbolt (nylon insert), for use with electric strikes $49.60XB11-720 • Mortise cylinder turn unit with ADA compliant style thumbturn 27.80Added to 09-900,09-904, 09-905 or09-907XL12-196 • Mortise cylinder turn unit with coin turn 26.50Added to 09-900XK10-992* • 10-072 Strike over 2" thru 6" lip 95.30XL11-515 1/8" Thick lead plate. Also specify lock function and door hand 254.00XL11-634 • Blank inside L Escutcheon 146.00XL11-636 • Blank outside L or N Escutcheon 200.00XL11-743 • Armor front with cutout to receive deadbolt only, for use with L9110, L9175 and 61.10L9176 dummy functions.XL11-778 Locked/Unlocked sign for rose trim thumbturns 9.40XL11-820 • Strike, 1 3/16" lip, one hole for latching functions, RH & LHR doorsXL11-821 • Strike, 1 3/16" lip, one hole for latching functions, LH & RHR doors19.70* Specify lip length. 625 used for 629 finish and 626 used for 630 finish.Note:2) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.L-42Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsFunctions S-2Complete Locks S-3Options S-4Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . . S-4Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-4Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . . . . . . . S-5Locks Less Components . . . . . . . . . . . . . . . . S-5Primus ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-6Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . . S-6Tamper Resistant Torx ® Screws . . . . . . . . . . . S-6Parts S-7Levers, Standard . . . . . . . . . . . . . . . . . . . . . . S-7Levers and Related Parts,Interchangeable Core . . . . . . . . . . . . . . . . . . . S-7Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-7Trim Combinations . . . . . . . . . . . . . . . . . . . . . S-8Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . . S-9Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-9Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-10Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-10Screw Packs, Standard . . . . . . . . . . . . . . . . S-10Screw Packs, Torx ® . . . . . . . . . . . . . . . . . . . S-10Special Parts . . . . . . . . . . . . . . . . . . . . . . . . S-10Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationS 51 P DLatch SuffixD = DeadlatchSCylinder SuffixP = 6-Pin CylinderL = Less 6-Pin CylinderR = Full Size InterchangeableCoreJ = Less Full SizeInterchangeable CoreT = Full Size Construction CoreFunctionLock SeriesFinish Codes and DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium PlatedStandard Features*Certification ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Latch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throwStrike 1 1/8" x 2 3/4", Square corner, T-strike, boxBackset Dual backset latch, fits either 2 3/8" or 2 3/4" backsetsCylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range 1 3/8" – 2" (except S40D: 1 3/8" – 1 7/8")Keys Two nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11S-1

S • FunctionsNotesANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.Non-Keyed LocksSCHLAGEANSIS10D F75 Passage LatchBoth levers always unlocked.S40D F76 Bath/Bedroom Privacy LockPush-button locking. Can be unlockedfrom outside with small circular tool.Turning inside lever releases button.Closing the door does not releasebutton (restoring).S170Single Dummy TrimDummy trim for one side of door.Used for door pull or as matchinginactive trim.Keyed LocksSCHLAGEANSIS51PD F81 Entrance LockUnlocked by key from outside whenoutside lever is locked by turn-buttonin inside lever. Inside lever alwaysunlocked.S70PD F84 Classroom LockOutside lever locked and unlocked bykey. Inside lever always unlocked.S80PD F86 Storeroom LockOutside lever fixed. Entrance by keyonly. Inside lever always unlocked.S-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Complete Locks • SFlair (FLA)* Jupiter (JUP) Neptune (NEP) Saturn (SAT)* Specify door hand when ordering FLA design.S-SeriesLever StyleFLA* SAT JUP NEPFinishes626 605 606 613619 625⧖AdditionalLeadtimeFunction Description 609KeylessS10D Passage $161 $173 $191S40D Privacy 200 212 230S170 Single dummy 77 83 93KeyedS51PD EntranceS70PD Classroom $253 $265 $283S80PD Storeroom* Specify door hand when ordering FLA design.Notes:1) Split designs and/or finishes are priced at the highest design and/or finish price.2) Keying options: see Keys & Keying.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.Price Book 72AEffective July 18, 2011 • Rev. 7/11S-3

S - OptionsNotes16-203Standard16-204DeadlatchesHsgAdd toBackset Description Dia Specify Lock Price2 3/8" or Square corner, 1" x 2 1/4", standard 16-203*2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8" 16-204N/C5" Square corner, 1" x 2 1/4" 16-132* $8.00* Latch includes F506-868 latch front adapter for 1 1/8" preparation, and G506-815 housing sleeve for 1" housing.Note: 1) Failure to use the above referenced latches and fire cup S605-206 included with the lockset will invalidate theUL Listing.10-001Standard10-025 10-027StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" 10-001 N/CSquare corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10-001 $6.001 1/2", 1 3/4", 2"1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 10-004 N/CANSI, no box, 1 1/4" x 4 7/8" 1 3/16"10-025N/C1 3/8", 1 1/2" 10.90Box for ANSI strike, must be specified — K510-066Square corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8"10-026 N/C1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027Notes:2) Electric strike (10-042) is available as a part. See S Parts: Strikes.3) Strikes with long-lip lengths are sold as parts. See S Parts: Special Parts.Shaded items are standard components and arefurnished with locks unless otherwise specified.S-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeable Core, Full Size Construction Core,Locks Less ComponentsOptions • SJupiter (JUP) Neptune (NEP) Saturn (SAT)Full Size Interchangeable CoreFull Size Construction CoreLock PriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceExample: S51RD SAT $29.00Full size construction core** T suffix Add to Lock PriceExample: S51TD SAT 29.00Less full size core J suffix Deduct fromExample: S51JD SATLock Price26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.Notes:1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Full size interchangeable core is available with JUP, NEP, and SAT designs only.Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess standard cylinder L suffix $50.00Example: S51LDLess deadlatch LLL for latch 15.80Example: S51PD SAT 626 LLL 10-025Less strike LLL for strike 3.50Example: S51PD SAT 612 16-204 LLLPrice Book 72AEffective July 18, 2011 • Rev. 7/11S-5

S • OptionsPrimus ® , Tactile Warning, Torx ® Screws,Non-Standard FinishesPrimus ®Primus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms& Conditions for more information.DescriptionS-Series lock and Primus cylinderS-Series lock and Primus full size interchangeable corecylinderSpecifyLock less cylinder (use L suffix). Order Primus cylinderseparately. See S: Complete Cylinders.Example: 1 ea. S51LD1 ea. 20-752Lock less full size core (use J suffix). Order Primus coreseparately. See Cylinders: Interchangeable Core.Example: 1 ea. S80JD1 ea. 20-740Tactile Warning (knurling)(SAT lever shown)Tactile WarningAdd to Lock PriceDescription Specify (per leverKnurling Preface the design code with 8 $35.60Example: 8SA for SATNotes:1) Knurling is available in SAT design only.2) Outside lever only is knurled unless otherwise specified.Tamper Resistant Torx ® ScrewsDescription Specify Add to Lock PriceLatch and strike screws Torx screws $13.90S-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Lock Trim: Levers, Levers and Related Parts,Interchangeable Core, RosesParts • SLevers, StandardDesigns and FinishesJUP NEP SAT FLA*605 606626 619 625 613⧖ Additional LeadtimeNumber Description 60908-020 Cylinder lever $46.50 $52.50 $62.50* Specify hand of lever when ordering FLA design.Levers and Related Parts, Interchangeable CoreDesigns and FinishesJUP NEP SAT FLA*605 606626 619 625 613⧖ Additional LeadtimeNumber Description 60908-027 Full size core lever $46.80 $42.80 $62.8008-030 Full size core lever, driver, retainer (converts PD to JD) 55.40 61.40 71.40S605-242* Full size core driver 6.10S605-241* Full size core retainer 2.70* Specify hand of lever when ordering FLA design.RosesDesigns and FinishesSAT(use for all designs)605606626 619 613625Part⧖ Additional LeadtimeNumber Description 60908-021 Inside rose $17.10 $19.10 $21.10Price Book 72AEffective July 18, 2011 • Rev. 7/11S-7

S • PartsLock Trim: Trim CombinationsLevers and Related Parts, Interchangeable CoreDesigns and FinishesJUP NEP SAT FLA*626 605 606 613619 625⧖ Additional LeadtimeNumber Description 609Inside Chassis and Lever68-011 S10, S70, S80 $72.60 $78.60 $88.6068-012 S40 81.00 87.00 97.0068-013 S51 81.00 87.00 97.00Outside Chassis, Rose and Lever68-001 S10 $67.80 73.80 $83.8068-002 S40 70.60 76.80 86.80Outside Chassis and Rose68-003** S51, S70 $51.60 57.60 $67.6068-004** S80 51.60 57.60 57.60* Specify hand of lever when ordering FLA design.** Available in SAT design only.S-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadlatches, StrikesParts • S16-203 16-204 39-030DeadlatchesSpecifyHsgPart Number Finish Backset Description Dia Price Each16-203* • 2 3/8" or Square corner, 1" x 2 1/4", standard16-204 • 2 3/4" 1/4" Radius round corner, 1" x 2 1/4" 7/8"$25.1016-132* • 5" Square corner, 1" x 2 1/4" 32.0039-030** • — Rabbeted latch and strike kit, 605 and 626 only — 38.40* Latch includes F506-868 latch front adaper for 1 1/8" preparation and G506-815 housing sleeve for 1" housing.** This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations.Note:1) Failure to use the above referenced latches and fire cup S605-206 included with the lockset will invalidate the ULListing.10-001 10-025 10-027 10-042StrikesPartNumberSpecifyFinish Description Lip LengthPriceEach10-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard 1 1/8" $7.2010-001* • Square corner, T-strike, box, 1 1/8" x 2 3/4" 1", 1 1/4", 10.201 1/2", 1 3/4", 2"10-004 • 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" 7.8010-025* • ANSI, no box, 1 1/4" x 4 7/8"1 3/16" 11.201 3/8" 30.00K510-066 Box for ANSI strike — 4.9010-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.1010-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 7.1010-042 • Electric strike, 1 1/4" x 4 7/8", 606 and 626 only — 193.00* Specify lip length.Price Book 72AEffective July 18, 2011 • Rev. 7/11S-9

S • PartsAdapters, Screws, Standard Screw Packs,Torx ® Screw Packs, Special Parts38-018 F506-868 G506-815AdaptersPart Specify PriceNumber Finish Description Each38-018 • Thin door extension ring (2 required per lock) $8.70F506-868 Latch front adapter (use with 1" faceplate in 1 1/8" door prep.) Order in multiples of 1000.50G506-815 1" Long latch housing sleeve to adapt 7/8" diameter housing to 1" bore 5.10ScrewsPrice EachPart Specify (Order inNumber Finish Description Type Size multiples of 100)C603-256 • ANSI strike PFH Combo 12-24 x 1" $0.70C603-897 • Latch or standard strike PFH Combo 8-32 x 3/4"F506-278 Mounting RPH Mach. 8-32 x 1 1/2"0.74F506-237 Mounting Wood #8 x 3/4" 0.52Screw Packs, StandardPart Specify PriceNumber Finish Description Contents EachS306-180 Mounting, S170 (2) S506-960 $3.50S306-182 • Mounting, latch and strike (2) F506-278 (4) C603-897(1) M504-271S306-183 • Mounting, latch and ANSI strike (2) F506-278 (2) C603-256(2) C603-897 (1) M504-2718.007.80Screw Packs, Torx ®Part Specify PriceNumber Finish Description EachC203-311 • Latch and standard strike (4) C503-766 (T-15)C203-312 • Latch and ANSI strike (2) C503-766 (T-15) $13.90(2) L583-371 (T-20)Note:1) Torx screw packs are furnished with appropriate T-xx installation tool(s).Special Parts⧖ Extended Factory Lead TimeNot subject to standard discount termsPart Specify PriceNumber Finish Description EachXQ07-351 •10-025 Strike, 7/8" flat lip $19.7010-025 Strike, lips through 6" (except 7/8",1 3/16",1 3/8" and 1 1/2") 95.30Notes: 2) Specify lip length.3) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.S-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionCS210Table of ContentsFunctionsCS210-2Complete LocksCS210-3OptionsCS210-5Deadbolts/Deadlatches . . . . . . . . . . CS210-5Deadbolt Strikes . . . . . . . . . . . . . . . CS210-5Deadlatch Strikes . . . . . . . . . . . . . . CS210-5Strike Combinations . . . . . . . . . . . . CS210-5Locks Less Components . . . . . . . . . CS210-6PartsCS210-7Levers, Standard . . . . . . . . . . . . . . . CS210-7Deadbolts . . . . . . . . . . . . . . . . . . . . CS210-8Deadlatches . . . . . . . . . . . . . . . . . . CS210-8Deadbolt/Deadlatch Combinations CS210-8Deadbolt Strikes . . . . . . . . . . . . . . . CS210-9Deadlatch Strikes . . . . . . . . . . . . . . CS210-9Deadbolt/Deadlatch StrikeCombinations . . . . . . . . . . . . . . . . . CS210-9Adapters . . . . . . . . . . . . . . . . . . . . CS210-10Screw Packs . . . . . . . . . . . . . . . . . CS210-10Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationCS2 10 P DLatch SuffixD = DeadlatchCylinder SuffixP = 6-Pin Cylinder(s)L = Less 6-Pin Cylinder(s)FunctionFinish Codesand DescriptionsLock SeriesCodeDescription605 (US 3) Bright Brass609 (US 5) Antique Brass619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated643e (US 11) Aged BronzeStandard FeaturesCertification: ANSI/BHMA Certified A156.12-2005, Grade 2, UL listed for 3-hour fire doorDeadbolt: 1 X 2-1/4", dual option faceplate, (square corner standard, round corner included in package),1" housing diameter, 1" throwLatch 1" x 2-1/4" dual option faceplate (square corner standard, round corner included in package). 1" edgebore requiredStrikes: 1-1/8" X 2-3/4", Square corner (deadbolt) and 1-5/8" X 2-1/4", Square corner, full lip (deadlatch)Backset: Adjustable backset, fits 2-3/8" or 2-3/4"Cylinders: 6-pin upper cylinder, solid brass, keyed 6-pin, C123 keyway, keyed different (KD)Door Range: 1-3/4" to 2"Keys: Nickel silver cut keys, 6-pin, C123 sectionCenter to Center: Fits 4" or 5-1/2" center to center door preps ** 5-1/2" center-to-center default set-up from factoryPrice Book 72AEffective July 18, 2011 • Rev. 7/11CS210-1

CS210 • FunctionsANSI/BHMA Certified A156.12-2005, Grade 2, UL Listed for 3-hour fire door.SCHLAGE ANSICS210PD F95Entrance, Single LockingDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fullythrown. Latch retracted by lever fromeither side. Turning inside lever retractsdeadbolt and latch simultaneously forimmediate exit.CS210-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

CS210-SeriesComplete Locks • CS210CS210-Series Lever DesignsAccent (ACC) Avanti (AVA) Elan (ELA) Flair (FLA)Jazz (JAZ) Manhattan (MNH) Callington (CLT) Champagne (CHP)Merano (MER)St. Annes (STA) Saturn (SAT) Neptune (NEP)Jupiter (JUP)Latitude (LAT)Avila (VLA)CS210-Series EscutcheonCamelot (CAM)Plymouth (PLY)Price Book 72AEffective July 18, 2011 • Rev. 7/11CS210-3

CS210 • Complete LocksCS210-Series Complete Locks, Deadbolts/DeadlatchesCS210-SeriesEscutcheonsCAM PLYDesigns and FinishesACC AVA CLT CHP ELA FLA JAZJUP LAT MER MHN NEP SATSTA VLAFunction Description 626 605 609 619 625 643eKeyed, Single LockingCS210PD Entrance $325 $337Notes:1) Split designs and/or finishes are priced at the higher design and/or finish price.2) Upper and lower cylinders will be keyed alike unless otherwise specified.3) Keying options: see Keys & Keying.4) For Everest D or Master Keying product must be ordered less cylinder.Cylinders will need to be ordered on a separate line.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.Deadbolts/DeadlatchesSpecifyBackset DescriptionHsgDia Deadbolt DeadlatchComboNumberAdd toLock Price2 3/8" Dual Option, 1" x 2 1/4", standardor (square corner standard, round corner included 1" 12-340 16-260 12-339 N/C2 3/4" in the package)CS210-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolt Strikes, Deadlatch Strikes,Strike CombinationsOptions • CS21010-094Standard10-064 10-092 10-095 10-116Deadbolt StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, box, 1 1/8" x 2 3/4", standard—10-094Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 10-0641/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8"10-092 N/CSquare corner, full lip, no box, 1 5/8" x 2 1/4" 10-095Round corner strike, no lip, 1 1/8" X 2 3/4" – 10-11610-001 10-026Standard10-027 10-058Deadlatch StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4", standard 10-001Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-0261/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027N/CCircular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 10-058Strike CombinationsSpecifyDeadbolt Combo Add toStrike Deadlatch Strike Number Lock Price10-094 10-026 10-12110-116 10-027 10-122 N/C10-092 10-027 10-12310-095 10-026 10-124Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11CS210-5

CS210 • OptionsFull Size Interchangeable Core,Locks Less ComponentsLocks Less ComponentsDeduct fromDescription Specify Lock PriceLess standard cylinder(s) L suffix $50.00Example: CS210LDeach cylLess deadbolt strike LLL for deadbolt strike 4.10Example: CS210PD SAT 12-339 LLL/10-001Less deadlatch strike LLL for deadlatch strike 3.40Example: CS210PD SAT 12-339 LLL/10-094CS210-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolts, Deadlatches, CombinationsParts • CS21012-340DeadboltsPart Specify PriceNumber Finish Backset Description Hsg Dia Each12-340 •Square corner, 1" x 2 1/4", standard2 3/8" or$28.90Round corner, 1"x 2 1/4", included2 3/4"1"12-291 •Square corner, 1 1/8" x 2 1/4" 28.9012-633 • 5" Square corner, 1 1/8" x 2 1/4" 61.3016-260DeadlatchesPart Specify PriceNumber Finish Backset Description Hsg Dia Each16-260 •Square corner, 1" x 2 1/4", standard2 3/8" or$24.80Round corner, 1" x 2 1/4", included2 3/4"1"16-228 • Square corner, 1 1/8" x 2 1/4" 24.8016-132 • 5" Square corner, 1" x 2 1/4" 32.00Deadbolt/Deadlatch CombinationsCombo Specify PriceNumber Finish Backset Description Deadbolt Deadlatch Each12-339 • 2-3/8" or Dual Option, 1" x 2-1/4" 12-340 16-260 $51.6016-483 • 2-3/4" Square corner, 1-1/8" x 2-1/4" 12-291 16-228 51.6016-484 • 5" Square corner, 1-1/8” x 2-1/4”, deadbolt 12-633 16-132 89.70and square corner, 1" x 2-1/4", deadlatchNote:1) Failure to use the above referenced deadlatches and deadbolts with the lockset will invalidate UL Listings and the ANSIGrade 2 certification.Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11CS210-7

CS210 • PartsDeadbolt Strikes, Deadlatch Strikes, Combinations10-094 10-064 10-092 10-09510-116Deadbolt StrikesPart Specify Lip PriceNumber Finish Description Length Each10-094 • Square corner, box, 1 1/8" x 2 3/4", standard—$11.3010-064 • Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 11.0010-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8" 7.0010-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"10-116 round corner strike, no lip, 1 1/8" X 2 3/4" - 12.1010-001 10-026 10-027 10-058Deadlatch StrikesPart Specify Lip PriceNumber Finish Description Length Each10-001 • Square corner, T-strike, box, 1 1/8" x 2 3/4" $6.9010-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4", standard 1 1/8" 6.7010-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 6.7010-058 • Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 9.60Deadbolt/Deadlatch Strike CombinationsCombo Specify PriceNumber Finish Deadbolt Strike Deadlatch Strike Each10-109 • 10-094 10-001, 1 1/8" Lip $20.0010-251 • 10-064 10-001, 1 1/8" Lip 19.0010-110 • 10-094 10-026 19.8010-253 • 10-064 10-026 18.8010-111 • 10-094 10-027 19.8010-256 • 10-064 10-027 18.8010-257 • 10-092 10-027 14.7010-258 • 10-064 10-058 22.0010-259 • 10-095 10-026 14.70Shaded items are standard components and arefurnished with locks unless otherwise specified.CS210-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionS200Table of ContentsFunctions S200-2Complete Locks S200-3Options S200-5Deadbolts/Deadlatches . . . . . . . . . . . S200-5Deadbolt Strikes . . . . . . . . . . . . . . . . S200-5Deadlatch Strikes . . . . . . . . . . . . . . . S200-5Strike Combinations . . . . . . . . . . . . . S200-5Full Size Interchangeable CoreFull Size Construction Core . . . . . . . . S200-6Locks Less Components . . . . . . . . . . S200-6Primus ® / Primus XP . . . . . . . . . . . . . S200-7Parts S200-8Levers, Standard . . . . . . . . . . . . . . . . S200-8Levers and Related Parts,Interchangeable Core . . . . . . . . . . . . S200-8Escutcheons . . . . . . . . . . . . . . . . . . . S200-8Trim Combinations . . . . . . . . . . . . . . . S200-9Deadbolts . . . . . . . . . . . . . . . . . . . . . S200-10Deadlatches . . . . . . . . . . . . . . . . . . . S200-10Deadbolt/Deadlatch Combinations . S200-10Deadbolt Strikes . . . . . . . . . . . . . . . S200-11Deadlatch Strikes . . . . . . . . . . . . . . S200-11Deadbolt/Deadlatch StrikeCombinations . . . . . . . . . . . . . . . . . . S200-11Adapters . . . . . . . . . . . . . . . . . . . . . S200-12Miscellaneous Parts . . . . . . . . . . . . S200-12Screws . . . . . . . . . . . . . . . . . . . . . . . S200-12Screw Packs . . . . . . . . . . . . . . . . . . S200-12Screw Pack, Torx ® . . . . . . . . . . . . . . S200-12Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationS2 51 P DLatch SuffixD = DeadlatchCylinder SuffixP = 6-Pin Cylinder(s)L = Less 6-Pin Cylinder(s)R = Full Size InterchangeableCore(s)J = Less Full SizeInterchangeable Core(s)T = Full Size Construction Core(s)FunctionFinish Codesand DescriptionsLock SeriesCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium PlatedStandard Features*Certification UL Listed for 3-hour fire door.Deadbolt 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throwDeadlatch 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throwStrikes 1 1/8" x 2 3/4", Square corner, box (deadbolt) and 1 1/8" x 2 3/4", Square corner, T-strike, box(deadlatch)Reinforcement Metal dust box reinforcer with three – 3" screwsBackset Adjustable for 2 3/8" or 2 3/4"Cylinder(s)*** 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, C123 keyway, keyed different(KD) — upper and lower cylinders are keyed alike**Door Range 1 3/8" – 2"KeysTwo nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11S200-1

S200 • FunctionsUL Listed for 3-hour fire door.SCHLAGEANSISCHLAGEANSIS210PDF95Entrance, Single LockingDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks when fullythrown. Latch retracted by lever fromeither side. Turning inside lever retractsdeadbolt and latch simultaneously forimmediate exit.S280PD F98 Storeroom LockDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks whenfully thrown. Outside lever is fixed.Entrance by key only. Turning insidelever retracts deadbolt and latchsimultaneously for immediate exit.Latch automatically deadlocks whendoor is closed.S251PDF97Entrance, Double LockingDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks whenfully thrown. Outside lever unlockedby key from outside when locked byturn button in inside lever. Turninginside lever retracts deadbolt and latchsimultaneously for immediate exit.Latch automatically deadlocks whendoor is closed.S290Single Dummy TrimDummy trim for inside of door.Used for door pull or as matchinginactive trim.S270PDClassroom LockDeadbolt operated by key fromoutside or by turn unit from inside.Bolt automatically deadlocks whenfully thrown. Outside lever is locked andunlocked by key from outside. Turninginside lever retracts deadbolt and latchsimultaneously for immediate exit.Latch automatically deadlocks whendoor is closed.S200-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

S200-SeriesComplete Locks • S200S200-Series Lever Designs and Inside EscutcheonSaturn (SAT)* Jupiter (JUP) Neptune (NEP) Saturn (SAT)* Saturn Escutcheon used for Jupiter, Neptune and Saturn designs.S200-Series FLAIR (FLA) Lever Designs and Inside EscutcheonFlair (FLA)Flair (FLA)(Specify door hand)Price Book 72AEffective July 18, 2011 • Rev. 7/11S200-3

S200 • Complete LocksS200-Series Complete Locks, Deadbolts/DeadlatchesS200-SeriesLever StyleFLA* SAT JUP NEPFinishes626 605 606 613619 625⧖ AdditionalLeadtimeFunction Description 609KeylessS290 Single dummy $213 $219 $229Keyed, Single LockingS210PD Entrance $326 $338 $356Keyed, Double LockingS251PD EntranceS270PD Classroom $426 $438 $456S280PD Storeroom* Specify door hand when ordering FLA design.Notes:1) Split designs and/or finishes are priced at the higher design and/or finish price.2) Upper and lower cylinders will be keyed alike unless otherwise specified.3) Keying options: see Keys & Keying.4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.16-481StandardDeadbolts/DeadlatchesSpecifyBackset DescriptionHsgDia Deadbolt DeadlatchComboNumberAdd toLock Price2 3/8" Square corner, 1" x 2 1/4", Standard 12-288 16-480 16-481or Round corner, 1" x 2 1/4" 12-289 16-204 16-482 N/C2 3/4" Square corner, 1 1/8" x 2 1/4" 1" 12-291 16-228 16-4835"Square corner, 1 1/8" x 2 1/4", deadbolt,and square corner, 1" x 2 1/4", deadlatch12-633 16-132* 16-484 $21.60* Includes G506-815 housing sleeve for latch and bolt for 1 1/8" preparation.Shaded items are standard components and arefurnished with locks unless otherwise specified.S200-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolt Strikes, Deadlatch Strikes,Strike CombinationsOptions • S20010-094Standard10-064 10-092 10-095Deadbolt StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, box, 1 1/8" x 2 3/4", standard—10-094Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 10-0641/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8"10-092Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-095N/C10-001Standard10-026 10-027 10-058Deadlatch StrikesAdd toDescription Lip Length Specify Lock PriceSquare corner, T-strike, box, 1 1/8" x 2 3/4", standard 10-001Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 10-0261/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-027N/CCircular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 10-058Strike CombinationsSpecifyDeadbolt Combo Add toStrike Deadlatch Strike Number Lock Price10-094 10-001, 1 1/8" Lip 10-10910-064 10-001, 1 1/8" Lip 10-25110-094 10-026 10-11010-064 10-026 10-25310-094 10-027 10-111 N/C10-064 10-027 10-25610-092 10-027 10-25710-064 10-058 10-25810-095 10-026 10-259Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11S200-5

S200 • OptionsFull Size Interchangeable Core,Locks Less ComponentsJupiter (JUP) Neptune (NEP) Saturn (SAT)Full Size Interchangeable CoreFull Size Construction CorePriceDescription Specify (per core)Full size core* R suffix Add to Lock PriceAll interchangeable core(s) $29.00Example: S251RD SATFull size construction core** T suffix Add to Lock PriceAll construction core(s) 29.00Example: S210TD JUPLess full size core J suffix Deduct fromLess interchangeable core(s)Lock PriceExample: S251JD JUP 26.00* Locks are furnished 1-bitted with two 6-pin keys unless otherwise specified. Locks are not available with 0-bittedinterchangeable cores.** Locks are assessed one non-refundable handling charge (50-231) per core. See for details.Notes: 1) Control keys are not furnished with locks and must be ordered separately. See Keys & Keying.2) Full size interchangeable core is available with JUP, NEP, and SAT designs only. FLA design available for S210function.Locks Less ComponentsDeduct fromDescription Specify Lock PriceLess standard cylinder(s) L suffix $50.00Example: S210LDeach cylLess deadbolt LLL for deadbolt 13.90Example: S251PD NEP 626 LLL/16-480 10-109Less deadlatch LLL for deadlatch 16.00Example: S251PD NEP 626 12-288/LLL 10-109Less deadbolt strike LLL for deadbolt strike 4.30Example: S251PD NEP 626 16-481 LLL/10-001Less deadlatch strike LLL for deadlatch strike 3.50Example: S251PD NEP 626 16-481 10-094/LLLS200-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Options • S200Primus ® S200-7Primus ® / Primus XPPrimus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.DescriptionSpecifyS200-Series keyed single locking lock and Primus cylinder Lock less cylinder (use L suffix). Order Primus cylinderseparately. See CylindersExample: 1 ea. S210LD1 ea. 20-569S200-Series keyed double locking lock and Primus cylinders Lock less cylinder (use L suffix). Order Primus cylinder(s)separately. See CylindersExample: 1 ea. S251LD1 ea. 20-7691 ea. 20-752S200-Series lock and Primus full size interchangeable core Lock less full size core(s) (use J suffix). Order Primus core(s)cylinder(s)separately. See Cylinders: Interchangeable Core.Example: 1 ea. S280JD2 ea. 20-740Price Book 72AEffective July 18, 2011 • Rev. 7/11

S200 • PartsLock Trim: Standard Levers, Levers and Related Parts,Interchangeable Core, EscutcheonsLevers, StandardDesigns and FinishesJUP NEP SAT FLA*626 605 606 609 613619 625Number Description08-020 Cylinder lever $50.80 $56.80 $66.80* Specify hand of lever when ordering FLA design.Levers and Related Parts, Interchangeable CoreDesigns and FinishesJUP NEP SAT FLA*605 606 613626 619 625⧖ Additional LeadtimeNumber Description 60908-027 Full size core lever $48.70 $54.70 $64.7008-030 Full size core lever, driver, retainer (converts PD to JD) 57.60 63.60 73.60S605-242* Full size core driver 6.40S605-241* Full size core retainer 2.80* Specify hand of lever when ordering FLA design.EscutcheonsDesigns and FinishesFLA SATFLAFLA MET (use for JUP and NEP) MET SAT MET605 605606 606609 609Part 619 619Number Description 626 626 625 625 613 61308-032 Inside escutcheon assembly $78.30 — $84.30 — $94.30 —36-056 Outside trim, tie-in escutcheon — $28.10 — $34.10 — $44.10S200-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Lock Trim: Trim CombinationsParts • S200Trim CombinationsDesigns and FinishesJUP NEP SAT FLA*605 606626 619 625 613Part⧖ Additional LeadtimeNumber Description 609Outside Chassis, Rose and Lever68-001 S210 $70.50 $76.50 $86.50Outside Chassis and Rose68-003** S251, S270 $53.70 $59.70 $69.7068-004** S280 53.70 59.70 69.70Inside Chassis and Lever08-034 S210, S270, S280 $72.50 $78.50 $88.5008-035 S251 80.70 86.70 $96.70* Specify hand of lever when ordering FLA design.** Available in SAT design only.Price Book 72AEffective July 18, 2011 • Rev. 7/11S200-9

S200 • PartsDeadbolts, Deadlatches, Combinations12-288DeadboltsPart Specify PriceNumber Finish Backset Description Hsg Dia Each12-288 •Square corner, 1" x 2 1/4", Standard $28.902 3/8" or12-289 • Round corner, 1"x 2 1/4"28.901"12-291 • 2 3/4" Square corner, 1 1/8" x 2 1/4" 28.9012-633 • 5" Square corner, 1 1/8" x 2 1/4" 61.3039-030* • - Rabbeted latch and strike kit, 605 and 626 only - 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/4" rabbeted door and frame preparations.16-480DeadlatchesPart Specify PriceNumber Finish Backset Description Hsg Dia Each16-480 •Square corner, 1" x 2 1/4", Standard $24.802 3/8" or16-204 •Round corner, 1" x 2 1/4"2 3/4"1” 24.8016-228 • Square corner, 1 1/8" x 2 1/4" 24.8016-132 • 5" Square corner, 1" x 2 1/4" 32.0039-030* • - Rabbeted latch and strike kit, 605 and 626 only - 38.40* This kit adapts square corner latches and 2 3/4" high square corner strikes to 1/4" rabbeted door and frame preparations.Deadbolt/Deadlatch CombinationsCombo Specify PriceNumber Finish Backset Deadbolt Deadlatch Each16-481 •12-288 16-480 $53.702 3/8"16-482 • or 2 3/4" 12-289 16-204 53.7016-483 •12-291 16-228 53.7016-484 • 5" 12-633 16-132* 93.30* Includes G506-815 housing sleeve for latch and bolt for 1 1/8" preparation.Note:1) Failure to use the above referenced deadlatches and deadbolts with the lockset will invalidate UL Listings.S200-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Deadbolt Strikes, Deadlatch Strikes, CombinationsParts • S20010-094 10-064 10-092 10-095 10-112Deadbolt StrikesPart Specify Lip PriceNumber Finish Description Length Each10-094 • Square corner, box, 1 1/8" x 2 3/4", standard—$11.3010-064 • Circular drive-in, thimble strike, 1 3/16" diameter, 494 (for 626) only 11.0010-092 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"1 1/8" 7.0010-095 • Square corner, full lip, no box, 1 5/8" x 2 1/4"10-112 Metal dust box with screws - 12.1010-001 10-026 10-027 10-058Deadlatch StrikesPart Specify Lip PriceNumber Finish Description Length Each10-001 • Square corner, T-strike, box, 1 1/8" x 2 3/4", standard $6.9010-026 • Square corner, full lip, no box, 1 5/8" x 2 1/4" 1 1/8" 6.7010-027 • 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 6.7010-058 • Circular, adjustable, 1 3/4" diameter, 605 and 626 only 1 7/32" 9.60Deadbolt/Deadlatch Strike CombinationsCombo Specify PriceNumber Finish Deadbolt Strike Deadlatch Strike Each10-109 • 10-094 10-001, 1 1/8" Lip $20.0010-251 • 10-064 10-001, 1 1/8" Lip 19.0010-110 • 10-094 10-026 19.8010-253 • 10-064 10-026 18.8010-111 • 10-094 10-027 19.8010-256 • 10-064 10-027 18.8010-257 • 10-092 10-027 14.7010-258 • 10-064 10-058 22.0010-259 • 10-095 10-026 14.70Price Book 72AEffective July 18, 2011 • Rev. 7/11S200-11

S200 • PartsAdapters, Miscellaneous Parts, Screws,Screw Packs, Torx ® Screw PackG506-815AdaptersPartPriceNumber Description EachG506-815 1" Long bolt or latch housing sleeve to adapt 7/8" diameter housing to 1" bore $5.10Miscellaneous PartsPartPriceNumber Description Each08-033 Interconnect assembly (For locks purchased BEFORE February 2008) $72.1008-000 Interconnect assembly (For locks purchased AFTER February 2008) 72.10S605-064 Rotational stop 3.10ScrewsPriceEachPart Specify (Order inNumber Finish Description Type Size multiples of 100)B502-998 Mounting, upper cylinder PFH Recess 10-32 x 2 1/4" $0.78C603-897 • Latch or standard strike PFH Combo 8-32 x 3/4" 0.74S605-289 Mounting, lower chassis PFH 8-32 x 1 1/4" 1.00S605-297 • Escutcheon (2 req.) POH 6-32 x 3/8" 1.10Screw PacksPartPriceNumber Description Contents EachS306-105 Mounting screws and tailpiece (2) S605-289(For locks purchased BEFORE February 2008) (2) B502-998 $6.70S306-106 Mounting screws and tailpieces, interchangeable core (2) S605-289(For locks purchased BEFORE February 2008) (2) B502-998(1) B520-24214.80(1) B520-243S306-151 Mounting screws and tailpiece (2) S605-289(For locks purchased AFTER February 2008) (2) B502-998 6.70Screw Pack, Torx ®Part Specify PriceNumber Finish Description Contents EachC203-311 • Latch and standard strike (2 req.) (4) C503-766 (T-15) $13.90Note:1) Torx ® screw packs are furnished with appropriate T-xx installation tool(s).S200-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsSchlage Cylinder & Keyway Terminology CYL-2Transformation and PIN CylindersCYL-3Multiple Tailpiece CylindersCYL-4Bulk Pack CylindersCYL-5Primus Cylinders-Sub-AssembledCYL-7A & H, AD, AL, CL, D, ND, PL, S & S200 CYL-8Tailpieces & Actuators . . . . . . . . . . . . . . . . .CYL-14Miscellaneous Parts . . . . . . . . . . . . . . . . . . .CYL-15B500CYL-16Standard Cylinders & Housings . . . . . . . . . .CYL-16Tailpieces, Drivers & Parts . . . . . . . . . . . . . . CYL-17B100, B250, B400, E/B, F100, H, MD, S200 CYL-18Deadbolt Cylinders . . . . . . . . . . . . . . . . . . . .CYL-18IC Cylinders & Miscellaneous Parts . . . . . . . .CYL-19Collars, Tailpieces and Reference Tables . . .CYL-20B300, BA300, F300, FA300 CYL-22Standard Cylinders & Housings . . . . . . . . . .CYL-22Tailpieces, Drivers & Parts . . . . . . . . . . . . . . CYL-23B600/700/800CYL-24Reference Table . . . . . . . . . . . . . . . . . . . . . .CYL-24Miscellaneous Parts and Tailpieces . . . . . . .CYL-26IC Housings and Parts . . . . . . . . . . . . . . . . .CYL-27MortiseCYL-28Standard Cylinders, L-Series . . . . . . . . . . . .CYL-28Standard Cylinders for Adams Rite,Adams Rite, Lori & Corbin Russwin . . . . . . .CYL-29Concealed Shell Cylinders . . . . . . . . . . . . . .CYL-30Cams, Cam Screws, Dummy Cylinder . . . .CYL-31Full Size Interchangeable Core . . . . . . . . . .CYL-32Small Format Interchangeable Core . . . . . . .CYL-34Cylinder Lengths and Collars By Application .CYL-36Schlage cylinders for Falcon & Von Duprin CYL-39Rim CylindersCYL-40Interchangeable CoresCYL-42Full Size Interchangeable Cores . . . . . . . . . .CYL-42Small Format Interchangeable Cores . . . . .CYL-43Competitor Retrofit CylindersCYL-44Corbin Russwin, Sargent,Yale Key-in-Knob/Lever . . . . . . . . . . . . . . . . CYL-44Reference Tables . . . . . . . . . . . . . . . . . . . . . CYL-44Corbin Russwin Master Ring . . . . . . . . . . . . CYL-46Cams to Operate Competitor Locks . . . . . . CYL-47Letter/Mail BoxCYL-48Special CylindersCYL-49Pins, Springs & Pinning Components CYL-50Full Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-50Small Format . . . . . . . . . . . . . . . . . . . . . . . . CYL-51PlugsCYL-53ShellsCYL-55Competitive Keying Kit RefillsCYL-56Product Identification20-001 118 XXXXKeywayDimensionCylinder AssemblyCYLINDERSFull Size Cylinders and CoresWhen ordering full size cylinders, specify the conventionalor Primus ® cylinder number, dimension (where required),keyway (e.g. C, CP, C123, etc.) or keyway family(e.g. Obverse, Everest ® C Family, Everest D Family) andfinish. If no keyway is specified, master keyed products willdefault to Everest C145 and non-master keyed productswill default to C123.Small Format Interchangeable CoresSmall format cores are available only in Everest restrictedkeyways and certain Best ® keyways. Small format corescannot be keyed into the same system as full size cylindersand cores because the keyways are different.See Schlage Cylinder & Keyway Terminology for moredetails on Schlage’s terminology.Finish Codesand DescriptionsCodeDescription605 (US 3) Bright Brass606 (US 4) Satin Brass609 (US 5) Antique Brass612 (US 10) Satin Bronze613 (US 10B) Oil Rubbed Bronze619 (US 15) Satin Nickel625 (US 26) Bright Chromium Plated626 (US 26D) Satin Chromium Plated629 (US 32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel643e (US11) Aged BronzeStandard Features*Certification BHMA certified to ANSI A156.5, 2001, Grade 1 OperationalKey Patents Primus XP keys are protected against unauthorized duplication by U.S. utility patents 7.159.424Everest and Everest Primus XP keys are protected by U.S. utility patents 5,715,717 andStandardCylinder5,809,816 and by U.S. design patents 428,324 and 426,452.Solid Brass 6 pin plugs and shells. Mortise and Rim cylinders utilize a two piece Stainless Steelsintered housing secured by 2 Torx ® screws. Standard keyway is Everest ® C123, furnished KeyedDifferent (KD) with two 6 pin nickel silver keys (except F series knobs and levers). Mortise cylinderstandard lengths are 1 1/8" for conventional cylinders, 1 1/2" for large format interchangeable coreand 1 3/8" for small format interchangeable core.SFIC Everest B combinated cores includes 2 change keys.ICFull size conventional cores are furnished 1-bitted. Primus cores are furnished 0-bitted. Small formatcores are available either uncombinated or combinated. Control keys must be ordered separately.Primus Primus XP cylinders are furnished MK, KA, KD, or Less Key Blank (LKB). See Terms & Conditions:Primus Sales Policy for additional details.Note: 1) For all master key cylinders and cores, key blanks can be substituted for cut keys at no additional charge.* Cylinders are furnished with standard features unless otherwise specifiedPrice Book 72AEffective July 18, 2011 • Rev. 7/11CYL-1

CYLINDERS • Schlage Cylinder & Keyway TerminologyPatented until 2014Patented until 2024Commercial ApplicationsMaximum Key Duplication RestrictionsSome Key Duplication RestrictionsNo Key Duplication RestrictionsSFIC AvailableCheck PinFinger Pins/Side Bar Configuration#7 finger pin used for added securityBulk Pack AvailableMaster keying available for Levels 2,3 and 4Master keying available for Levels 1+, 2,3 and 4Master keying available for all LevelsClassic Keyway• • • •• • • • •• • • • • • •Everest Keyway• • • • • • •• • • • • •• • • • • • •EverestCylinders and keys which incorporate all new keyways with thepatented undercut groove on the right side of the key section. CFamily is the name of the open family of keyways. B Family (forSFIC) and D Family keyways are restricted.Primus XP CylindersSchlage’s high security sidebar cylinder mechanism. Patentedkey control, geographical exclusivity, and pick resistance arestandard. UL437 drill resistance is optional. Primus keys operateconventional cylinders.Restricted KeywaysSpecial non-stock keyways set aside for limited use and a higherdegree of key control. A letter of authorization from the end useris requiredto process orders for keys, blanks and cylinders.Small Format Interchangeable Core (SFIC)A core completely interchangeable with Best, Falcon, etc. NoPrimus version exists. Pins, springs, keys and keyways are basedon a plug diameter smaller than the standard 1/2".KeywaysOpposingTermsCylinder MechanismsOpposingTermsKey ControlOpposingTermsCylinder CategoryOpposingTermsClassicSchlage pin tumbler keyways which existed beforeEverest keyways. Obverse is the name of the open familyof keyways (C, E, etc.) and there are three other families ofrestricted keyways: Reverse, Numbered and Quad.Conventional CylindersNormal, standard cylinders.Open KeywaysStandard keyways available without any ordering formalities.C Family (Everest Conventional) and Obverse (ClassicConventional) keyways are open. All others are restricted.Full SizePertaining to cylinders (including interchangeable cores),keys and keyways based on the industry standard plugdiameter of about 1/2".CYL-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Transformation and PIN • CYLINDERSModular Key-In-Knob CylinderModular Mortise CylinderModular Rim CylinderModular Rim Cylinder PartsHousing Tailpiece DriverB520-727 B502-899 B502-310CamL583-474 or L583-475Cam Screw, 1”B520-692Plug ExtensionB590-299Cam Screw, ³⁄₄”B520-6911³⁄₄"1⁵⁄₈"CamL583-474 or L583-475Plug ExtensionB590-298Cam Screw, ¹⁄₂”B520-690Modular Housing InterchangeablilityHousing Cam Cam Screw Plug ExtensonPart SizeNumberPart NumberB520-721 1-1/8” L583-474 B520-690 –B520-722 1-1/4” L583-475 B520-690 –B520-723 1-3/8” L583-474 B520-691 B590-298B520-724 1-1/2” L583-475 B520-691 B590-298B520-725 1-5/8” L583-474 B520-692 B590-299B520-726 1-3/4” L583-475 B520-692 B590-2991¹⁄₂"1³⁄₈"1¹⁄₄"1¹⁄₈" housingCamL583-474 orL583-475Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-3

CYLINDERS • Multiple TailpieceKey-in Knob/LeverReduce Cylinder InventoryMultiple tailpiece cylinders allow high inventory flexibilitywith low investment. Included with each cylinder aretailpieces to suit these locks:• A-Series (all designs)• AL-Series• D-Series Knobs• D-Series Levers• H-Series Knobs (all designs)• ND-Series LeversCylinders are furnished 0-bitted. Conventional cylindersare furnished with two (2) blank keys.Multiple Tailpiece Key-in-Knob/Lever CylindersPartPriceKeyway Contents Number Each(1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 $50.00(1) A301-338 tailpiece, A & H-Series OrbitAll Keyways Everest ® (1) A700-031 tailpiece, A, AL, H-Series (except Orbit)and Classic (1) C603-524 tailpiece, D-Series Knobs and LeversFamilies (1) N523-022 tailpiece, ND-Series Levers (black)(2) C503-115 cap pin springs(2) C503-116 cap pins(2) 35-009 key blanks(1) Pre-assembled cylinder 0-bitted, less tailpiece and keys(1) A301-338 tailpiece, A & H-Series Orbit 40-700* / 40-700-XP 92.00Primus ® / Primus XP (1) A700-031 tailpiece, AL-Series Controlled AccessAll Keyways (1) C603-524 tailpiece, D-Series Knobs and Levers(Classic & Everest) (1) N523-022 tailpiece, ND-Series Levers (black)(2) C503-115 cap pin springs40-500* / 40-500-XPUL437 Listed 112.00(2) C503-116 cap pins* Primus key blanks must be ordered separately.Notes: 1) Specify keyway and finish: 606 or 626.2) Cylinders are only available 0-bitted.3) Multiple tailpiece cylinders are not available for hotel function locks.CYL-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Key-in-Knob/LeverInterchangeable CoresBulk Pack • CYLINDERSKey Large Jobs Faster!Bulk Packs are kits that contain all of the components needed to build 10 cylinders. For addedconvenience the shells are pre-loaded with pins and springs and slid onto a follower. Cams andtailpieces are sold separately in economical 10-packs to maximize flexibility. Keys and Primuscomponents are also sold separately.The unit price of the unassembled cylinder is up to 15% less than buying it completelyassembled. In addition to this savings, labor time is reduced since cylinders don’thave to be taken apart before being pinned in the field.09-764*Everest ® Primus ® Bulk Pack(Includes 10 of each item shown)10-Piece Bulk Pack Key-in-Knob/Lever CylindersCylinder Keyway Bulk Pack Price EachContents (10 each) Mechanism Type Number PackLoaded shells Cap pins Check pinsConventionalClassic 09-409 $381.00Plugs Cap pin springs (Everest conventional only) Everest Family 09-751 381.00Caps Check pin springs Primus /(Everest conventional only) Everest 09-764 628.00Primus XPPrimus / Classic 09-833 628.00Primus XP10-Piece Bulk Pack Mortise CylindersCylinder Keyway Bulk Pack Price EachContents (10 each) Mechanism Type Number PackLoaded shells Check pinsConventionalClassic 09-412 $428.00Plugs (Everest ® conventional only) Everest Family 09-754 428.00Cam screws Check pin springs Primus ® / Primus XP Everest 09-767 688.00(Everest conventional only) Primus / Primus XP Classic 09-835 688.0010-Piece Bulk Pack Rim CylindersCylinder Keyway Bulk Pack Price EachContents (10 each) Mechanism Type Number PackClassic 09-410 $442.00ConventionalLoaded shells Collars Screws & back plate packsPlugs Tailpieces Check pins Everest Family 09-752 442.00Caps Drivers (Everest conventional only) Primus / Everest 09-765 712.00Cap Pins Cap pin springs Check pin springs Primus XP(Everest conventional) Primus /Primus XPClassic 09-834 682.0010-Piece Bulk Pack Interchangeable CoresCylinder Keyway Bulk Pack Price EachContents (10 each) Mechanism Type Number PackLoaded shells Actuating rings Check pinsConventionalClassic 09-411 $460.00Plugs Actuating pins (Everest conventional only) Everest Family 09-753 460.00Caps Control pins Check pin springs Primus /Cap pins & springs (Everest conventional only) Primus XPPrimus /Primus XPEverest 09-766 752.00Classic 09-836 752.00Notes: 1) Specify finish, keyway, and 118 or 114 length.2) Order cam and collar 10-packs separately. See below.3) Bulk pack cylinders are not available for hotel function locks.4) Key blanks must be ordered separately.5) For Everest D family and restricted keyways (Quad, Numbered, and reversed) add $10.00 per cylinder. This does not apply to Primus.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-5

CYLINDERS • Bulk PackKey-in-Knob/LeverInterchangeable CoresBulk Pack Modular Cylinder Cams and CollarsKeyway Contents Bulk Pack Price EachType Description (10 each) Part Number PackStraight Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-476 09-195 $20.00All Straight Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-477 09-196 20.00(Classic/ L-Series Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-474 09-197 20.00Everset & L-Series Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-475 09-198 20.00Primus, etc) Adam’s Rite Kit - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-446 09-199* 116.00Adam’s Rite Kit - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-447 09-200* 119.00* Specify finish 605, 606, 612, 613, 625 or 626, includes 10 each 36-079-037 and B220-050.10-Piece Tailpiece Packs for Bulk Pack CylindersCylinder Contents Bulk Pack Price EachMechanism Description (10 each) Part Number PackAll Modular A-Series (except Orbit) A301-337 with C603-098 security disc 09-756Cylinders A-Series Orbit (except A73) A301-338 09-757(Classic,Everest & AL-Series A700-031 09-416 $10.40Primus) D-Series Knob and Levers C604-243 09-418ND-Series Levers N523-022 (black) 09-019Note:10-piece tailpiece packs are not available for hotel function cylinders.CYL-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Mortise, Rim,Primus Cylinder-SubBulk Pack • CYLINDERSPrimus Cylinders-Sub-AssembledPart Description PriceNumberEach20-200 Primus classic Key in Lever sub-assembled multiple tailpiece. $65.00(A & H series Orbit A301-338, AL Series A700-031, D levers and knobsC604-243, ND Series N523-022). *20-201 Primus classic Mortise Cylinder (specify 1 ¼” or 1 1/8”) sub assembled. Multiple 68.00cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Standard(L583-446 or L583-447)*20-202Primus ClassicPrimus classic Rim Cylinder sub-assembled. * 68.0020-203 Primus Everest Mortise Cylinder (specify 1 ¼” or 1 1/8”) sub assembled. Multiple 68.00or Everest (Specifycams – Schlage (L583-474 or L583-475), AR (L583-476 0r L583-477) and Standardkeyway)(L583-446 or L583-447)*20-204 Primus Everest Key in Lever sub-assembled . multiple tailpiece. (A & H series 68.00Orbit A301-338, AL Series A700-031, D levers and knobs C604-243,ND Series N523-022). *20-205 Primus Everest Mortise Cylinder (1 1/4" or 1 1 /8") sub-assembled. Multiple 68.00cams-Schlage AR, Standard *20-206 Primus Everest Rim Cylinder sub-assembled. * 68.0020-207 Primus Everest FSIC sub-assembled. * 70.0020-208 Primus classic UL437 Key in Lever sub-assembled . multiple tailpiece. (A & H series 81.00Orbit A301-338, AL Series A700-031, D levers and knobsC604-243,ND Series N523-022). *20-209 Primus classic UL437 Mortise Cylinder (specify 1 ¼” or 1 1/8”) sub assembled. 91.00Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 0r L583-477) andPrimus Classic Standard (L583-446 or L583-447)*20-210 or Everest UL437 Primus classic UL 437 Rim Cylinder sub-assembled. * 91.0020-211 (Specify Keyway) Primus Everest UL 437 Key in Lever sub-assembled . multiple tailpiece (A & H series 81.00Orbit A301-338, AL Series A700-031, D levers and knobs C604-243,ND Series N523-022) *20-212 Primus Everest UL437 Mortise Cylinder (specify 1 ¼” or 1 1/8”) sub assembled. 91.00Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 0r L583-477) andStandard (L583-446 or L583-447)*20-213 Primus Everest UL 437 Rim Cylinder sub-assembled. * 91.00* Please order separately: Keys, plug pins, Primus finger pins and finger pins springs, side bar and side bar springs.Primus Competitor Cylinders-Sub-AssembledPartPriceNumber Description Each20-221 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CL3300 C20-219 Primus Classic Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CL3400, CL360020-218 or Everest Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CK420020-214 (Specify keyway) Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 10 Line Levers $68.0020-215 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs20-21620-220Primus, sub-assy, key-in-knob cylinder for Sargent 6 Line Except B KnobPrimus, sub-assy, key-in-knob for Yale 5300LN, 5400LN Levers20-217 Primus, sub-assy, key-in-knob Yale 5300, 5400, 6200 Knobs20-222 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 10 Line Levers20-223 Primus, sub-assy, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs20-224 Primus Classic Primus, sub-assy, key-in-knob cylinder for Sargent 6 Line Except B Knob20-225 or Everest UL437 Primus, sub-assy, key-in-knob Yale 5300, 5400, 6200 Knobs20-228 (Specify Keyway) Primus, sub-assy, key-in-knob for Yale 5300LN, 5400LN Levers89.0020-226 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CK420020-227 Primus, sub-assy, key-in-knob cylinder for Corbin RusswinCL3400, CL360020-229 Primus, sub-assy, key-in-knob cylinder for Corbin Russwin CL3300Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-7

CYLINDERS • Key-in-Knob/LeverReference TablesA, AD, H-SeriesKnobsHorizontalTailpieceNon-HotelFunctionsAGEOPLY A A73C, D TUL ORB ORBHotel FunctionDDthickdoorA, HA, HORBAll Modular CylinderKey FamiliesLeversVerticalTailpieceNon-HotelFunctionsDALNDHotel FunctionD, NDALAll Modular CylinderKey FamiliesA & H-Series Knob Cylinder Reference TableCylinder Complete Price Keyway Plug Shell TailpieceFunction Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14)5-Pin Knobs Conventional Discontinued - Classic 33-005 A201-848 A508-606Conventional 21-002 $50.00Classic 33-137 A508-653 A301-337Everest 33-138 A508-653 A301-337Except OrbitPrimus ® 20-72492.00Classic 33-136Primus-XP 20-724-XP Everest 33-119A508-655 A301-337Primus UL437 20-524112.00Classic 33-154Primus UL437-XP 20-524-XP Everest 33-221Conventional 21-002-122 50.00Classic 33-137 A508-653 A301-338Non-Hotel Everest 33-138 A508-653 A301-338Functions Orbit Except Primus 20-724-12292.00Classic 33-136A73Function Primus-XP 20-724-122-XP Everest 33-119A508-655 A301-338Primus UL437 20-524-122112.00Classic 33-154Primus UL437-XP 20-524-122-XP Everest 33-221CompleteConventionalClassic 33-137 A508-653 A301-339cylinderEverest 33-138 A508-653 A301-339Primus discontinuedClassic 33-136A73 OrbitPrimus-XP but may be - Everest 33-119A508-655 A301-339Primus UL437 assembled inClassic 33-154the field.Primus UL437-XP Everest 33-221A85, H185 Except Orbit 21-003 74.00Classic 33-216 A508-653A501-991*HotelConventionalEverest 33-235 A508-653Function Orbit 21-003-168 74.00Classic 33-216 A508-653A501-693*Everest 33-235 A508-653* Requires C503-767 driver.CYL-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Reference TablesAD-SeriesKey-in-Knob/Lever • CYLINDERSAD-Series Cylinder Reference TableCylinder Complete Price Keyway Plug Shell TailpieceFunction Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14)Conventional 23-013 $50.00 Classic 33-137AllEverest 33-138C604-524 C604-524cylindricalPrimus 20-750 92.00 Classic 33-136ExitEverest 33-134(993R, All Primus XP 20-750-XP 92.00 Classic 33-136993S,Everest 33-134993M) withPrimus UL 437 20-550 112.00 Classic 33-154 A508-655 C604-243ATH, 8ATEverest 33-221designonlyPrimus UL 437 XP 20-550-XP 112.00 Classic 33-154Everest 33-221Conventional 23-118 50.00 Classic 33-137Everest 33-138A508-653 23538085Primus 20-854 92.00 Classic 33-136Everest 33-134MS, MD All Primus XP 20-854-XP 92.00 Classic 33-136Everest 33-134Primus UL 437 20-554 112.00 Classic 33-154 A508-655 23538085Everest 33-221Primus UL 437 XP 20-554-XP 112.00 Classic 33-154Everest 33-221Conventional 23-118 50.00 Classic 33-137Everest 33-138A508-653 23538085Primus 20-854 92.00 Classic 33-136993R Except Everest 33-134993S ATH,8AT Primus XP 20-854-XP 92.00 Classic 33-136993M Everest 33-134 A508-655 23538085Primus UL 437 20-554 112.00 Classic 33-154Everest 33-221Primus UL 437 XP 20-554-XP 112.00 Classic 33-154Everest 33-221Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-9

CYLINDERS • Key-in-Knob/LeverReference TablesAL, D-Series KnobAL-Series Cylinder Reference TableCylinder Complete Price Keyway Plug Shell TailpieceFunction Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14)Conventional 21-020 $50.00Classic 33-137 A508-653 A700-031Everest 33-138 A508-653Non-Hotel Primus 20-72892.00Classic 33-136FunctionsAllPrimus-XP 20-728-XP Everest 33-119Primus UL437 20-528A508-655 A700-031112.00Classic 33-154Primus UL437-XP 20-528-XP Everest 33-221AL85 HotelConventional 21-021 74.00Classic 33-216 A508-653Function A700-023*Everest 33-235 A508-653D-Series Knob Cylinder Reference TableDoorFunction ThicknessCylinderMechanismCompleteCylinderPriceEachKeywayTypePlug(See CYL-53)Shell(See CYL-55)Tailpiece(See CYL-14)Conventional 23-001 $50.00Classic 33-137 A508-653 C604-524Everest 33-138 A508-653 C604-524StandardPrimus ® 20-74892.00Classic 33-136Primus XP 20-748-XP Everest 33-119Primus UL437 20-548112.00Classic 33-154Non-Hotel Primus XP UL437 20-548-XP Everest 33-221A508-655 C604-243FunctionsConventional 21-002 50.00Classic 33-137 A508-653 A301-337Everest 33-138 A508-653 A301-3372" – 2 1/2"Primus 20-72492.00Classic 33-136Primus XP 20-724-XP Everest 33-119Primus UL437 20-524112.00Classic 33-154Primus XP UL437 20-524-XP Everest 33-221A508-655 A301-337Standard Conventional 23-003 74.00Classic 33-216 A508-653D85 Hotel Everest 33-235 A508-653C604-106*Function 2" – 2 1/2" Conventional 23-003-098 74.00Classic 33-216 A508-653Everest 33-235 A508-653C604-107** Requires C503-767 driver.Notes: See next page.CYL-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Reference TablesD-Series, ND-SeriesKey-in-Knob/Lever • CYLINDERSD-Series Lever Cylinder Reference TableCylinder Complete Price Keyway Plug Shell TailpieceFunction Design Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14)Conventional 23-013 $50.00Classic 33-137 A508-653 C604-243Everest 33-138 A508-653 C604-243Non-Hotel Primus 20-75092.00Classic 33-136FunctionsAllPrimus XP 20-750-XP Everest 33-119Primus UL437 20-550112.00Classic 33-154Primus XP UL437 20-550-XP Everest 33-221A508-655 C604-243D85 HotelConventional 23-014 74.00Classic 33-216 A508-653Function Everest 33-235 A508-653C604-348*ND-Series Lever Cylinder Reference TableDoor Cylinder Complete Price Keyway Plug Shell TailpieceFunction Thickness Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14)Conventional 23-065 $50.00Classic 33-137 A508-653 N523-022Everest 33-138 A508-653 N523-022Non-HotelPrimus 20-76592.00Classic 33-136Functions StandardPrimus XP 20-765-XP Everest 33-119Primus UL437 20-565112.00Classic 33-154Primus XP UL437 20-565-XP Everest 33-221A508-655 N523-022ND85 HotelConventional 23-000 74.00Classic 33-216 A508-653Function Everest 33-235 A508-653N523-123* Requires C503-767 driver.Notes: 1) Finishes: 606 and 626.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs.C123 (Everest).3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.4) For Everest ® D Family restricted keyways (Quad, Numbered, Reversed), add $10.00 per cylinder or core.See Terms & Conditions for more information.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-11

CYLINDERS • Key-in-Knob/LeverReference TablesS, S200-SeriesS & S200-Series Lever Cylinder Reference TableCylinder Complete Price Keyway Plug Shell TailpieceMechanism Design Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-14)Conventional 21-059 $50.00Classic 33-137 A508-653 S605-231Everest 33-138 A508-653 S605-231Primus ®Keyed Levers20-752 92.00 Classic 33-136Primus -XP 20-752-XP 92.00 Everest 33-119Primus UL437 20-552 112.00 Classic 33-154A508-655 S605-231Primus UL437-XP 20-552-XP 112.00 Everest 33-221Notes: 1) Finishes: 606 and 626.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).3) Hotel function cylinders are furnished 0-bitted and emergency keys must be ordered separately.4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) S and S200-Series cylinders require sleeve S605-192.For pins, springs, etc.,see CYL-50.CYL-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Reference TablesCL and Portable SecurityKey-in-Knob/Lever • CYLINDERSDoorDrawerCL-Series Cabinet Lock Cylinder Reference TableCylinder Complete Price Keyway Plug Shell ActuatorApplication Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-15)Conventional 20-172 $50.00Classic 33-137 A508-653Everest 33-138 A508-653Primus ® 20-77292.00Classic 33-136DoorPrimus XP 20-772-XP Everest 33-119A508-655Primus UL437 20-572112.00Classic 33-154Primus XP UL437 20-572-XP Everest 33-221CL10-360Conventional 20-174 50.00Classic 33-137 A508-653Everest 33-138 A508-653DrawerPrimus 20-77492.00Classic 33-136Primus XP 20-774-XP Everest 33-119A508-655Primus UL437 20-574112.00Classic 33-154Primus XP UL437 20-574-XP Everest 33-221Note: 1) Use tailpiece CL10-361 for 7/8” -1 1/8” thickness and CL10-362 for 1 3/8” thick door or drawer.3) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) S and S200-Series cylinders require sleeve S605-192.KS-Full Size Removable CoreKS-Series PadlocksKC-Series CablesPortable Security CylindersCylinder Complete Price Keyway Plug Shell ActuatorSeries Mechanism Cylinder Each Type (See CYL-53) (See CYL-55) (See CYL-15)Conventional 47-413 $50.00Classic 33-137A508-653Everest 33-138KS-Series*Primus 47-74392.00Classic 33-136 KZ32DA0Primus XP 47-743-XP Everest 33-119A508-655Primus UL437 47-542112.00Classic 33-154Primus XP UL437 47-542-XP Everest 33-221Conventional 47-414 50.00Classic 33-137 A508-653Everest 33-138KC-SeriesPrimus 47-74492.00Classic 33-136 KZ34DA0Primus XP 47-744-XP Everest 33-119A508-655Primus UL437 47-543112.00Classic 33-154Primus XP UL437 47-543-XP Everest 33-221* For FSIC options please see page CYL-44For pins, springs, etc.,see CYL-50.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-13

CYLINDERS • Key-in-Knob/LeverPartsA, AD, AL, L, D, H, ND, S, S200-SeriesTailpieces and ActuatorsPartNumber Lockset DescriptionPriceEachA201-934 A73 Orbit Classic conventional non modular cylinders $6.10A301-337* A, H Modular cylinders all keyway families5.50A301-338 A, H Orbit (Classic, Everest & Primus)1.10A301-339 A73 Orbit 6.10A501-693* A85,H185 OrbitFaculty Restroom function 2.00A501-991* A85, H185 Faculty Restroom function 2.00A508-606 A, H Classic conventional non modular 1.10A508-614 Orbit Classic conventional non modular 1.10A700-031 AL All except hotel function 1.10A700-023* AL85 Faculty Restroom function for Modular Cylinder 4.00C604-243 DKnobs & levers,see reference table1.10C604-106* D85 Knobs, hotel function 4.00C604-107* D85 Knobs, hotel function, thick door 7.00C604-348* D85 Levers, hotel function 4.10N523-022 ND Modular cylinders all keyway families 1.10(Classic, Everest & Primus)N523-023 ND Classic conventional (silver) non modular 1.10N523-123* ND85 Faculty Restroom Function 3.80S605-228 S, S200 Classic conventional non modular 1.70S605-231 S, S200 Modular cylinders all keyway families 6.30(Classic, Everest & Primus)* Requires C503-767 driver.Hotel Function Indicator Pins, Etc.PartPriceNumber Description EachC503-767 Driver for hotel tailpieces $1.20C603-195* Obstruction pin, Classic 0.98C604-144Indicator pin spring, Classic(order in multiples of 100)0.12C604-362 Obstruction pin, Everest 0.98C604-368 Indicator pin, Everest 3.30C604-369Indicator pin spring, Everest(order in multiples of 100)0.12C604-371Indicator pin, Classic(except Reverse sections)3.30C604-372Indicator pin, Classic(Reverse sections)3.30* Not compatible with Quad keyway cylinders manufactured before 1999.AD Series Lock - TailpiecesPart Lever PriceNumber Description Keyway Style EachC603-524 All AD Cylindrical Locks - CY Classic All $0.98AD Exit -993R, 993S, 993M non modular ATH, 8ATC604-243 All AD Cylindrical Locks Modular Cylinders all keyway families All 0.98AD Exit - 993R, 993S, 993M (Classic, Everest 4 Primus) ATH, 8AT23538077 All AD Mortise locks - MS, MD Classic All 1.10AD Exit - 993R, 993S, 993M non modular Except ATH, 8AT23538085 All AD Mortise locks - MS, MD Modular Cylinders all keyway families All 1.10AD Exit - 993R, 993S, 993M (Classic, Everest 4 Primus) Except ATH, 8ATFor pins, springs, etc.,see CYL-50.CYL-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

Miscellaneous PartsComplete Locks • CYLINDERSMiscellaneous PartsPartNumber DescriptionPriceEachCL10-301 CL-Series cylinder retaining screw $0.32CL10-360 CL-Series driver 2.60CL10-361 CL Series actuator, 7/8" to 1 1/8" door or drawer 1.90CL10-362 CL-Series actuator, 1 3/8" door or drawer 1.90F605-038 F Series plug retainer (order in multiples of 100) 0.14KZ32BB0 KS Padlocks-Series cylinder housing screw (order in multiples of 30) 1.00KZ32DA0 KS Padlocks-Series cylinder driver(order in multiples of 30) 2.20KZ33DC0 KC Cable-Series driver mounting screw (order in multiples of 30) 2.30KZ34CA0 KC Cable-Series cylinder cap (order in multiples of 30) 1.80KZ34ED0 KC Cable-Series cylinder cap pin (order in multiples of 30) 0.06KZ34DA0 KC Cable -Series driver (order in multiples of 30) 2.30KZ38BA1** KS Padlocks 20, 40, 70, 80, 90 and KC-Series cylinder housing 7.80(order in multiples of 20)KZ38BA2** KS Padlock10 and KC-Series cylinder housing (order in multiples of 20) 7.80S605-192 S, S200 sleeve 1.10S605-228 S, S200 driver 1.70XA10-594* Spacer for 5-pin cyl. in 6-pin A or H-Series knob 5.00* Subject to Specials discounting and extended factory lead time.** KC-Series Cables accept both the KZ38BA1 and the KZ38BA2 cylinder housings.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-15

CYLINDERS • DeadboltsB500-SeriesCylinders, PartsB500 Series Cylinders - Single Cylinder DeadboltsPart Door PriceNumber Description Thickness Each22-003 Conventional 1 3/8" - 1 3/4" $50.0022-004 Conventional 1 3/4" - 2 1/4"20-188 Primus 1 3/8" – 1 7/8"20-188-XP Primus XP 1 3/8" – 1 7/8" 92.0020-189 Primus 1 7/8" – 2 1/4"20-189-XP Primus XP 1 7/8" – 2 1/4"20-190 Primus UL 1 3/8" – 1 7/8"20-190-XP Primus XP UL 1 3/8" – 1 7/8" 112.0020-191 Primus UL 1 7/8" – 2 1/4"20-191-XP Primus XP UL 1 7/8" – 2 1/4"Notes: 1) Finishes: 606 and 626 only.2) Specify keyway to distinguishbetween Everest and Classic.Example: C or CP (Classic) vs.C123 (Everest).3) Specify LKB if 0-bitted Primuscylinders are required less keyblanks. Deduct $9.80 percylinder.4) For Everest D Family restrictedkeyways in conventionalcylinders, add $10.00.See Terms & Conditions formore information.B500 Series Cylinders - Double Cylinder Deadbolts*Part Door PriceNumber Description Thickness Each22-645 Conventional 1 3/8" - 1 3/4" $50.0022-646 Conventional 1 3/4" - 2 1/4"20-745 Primus 1 3/8" – 1 7/8"20-745-XP Primus XP 1 3/8" – 1 7/8"20-746 Primus 1 7/8" – 2 1/4" 92.0020-746-XP Primus XP 1 7/8" – 2 1/4"20-545 Primus UL 1 3/8" – 1 7/8"20-545-XP Primus XP UL 1 3/8" – 1 7/8" 112.0020-546 Primus UL 1 7/8" – 2 1/4"20-546-XP Primus XP UL 1 7/8" – 2 1/4"* Part numbers for double sided cylinders represent one cylinder only.B500 Series Cylinders - B561 One-Way DeadboltPart Door PriceNumber Description Thickness Each22-069 Conventional 1 3/8" - 2 1/4" $50.0020-071 Primus 1 3/8" - 2 1/4" 92.0020-071-XP Primus XP 1 3/8" - 2 1/4" 92.0020-072 Primus UL 1 3/8" - 2 1/4" 112.0020-072-XP Primus XP UL 1 3/8" - 2 1/4" 112.00B500 Series Cylinder PartsCylinder Mechanism Complete Cylinder Keyway Type Plug ShellConventional Classic 33-137 A508-653Everest 33-138See single & double cylinder partPrimus/Primus XP Classic 33-136numbers listed aboveEverest 33-119Primus UL/Primus XP UL Classic 33-154 A508-655Everest 33-221CYL-16Price Book 72AEffective July 18, 2011 • Rev. 7/11

B500-SeriesCylinders, PartsDeadbolts • CYLINDERSTailpiecesPart Number Description Door Thickness Price EachSingle Cylinder, B560P, B563PB520-651 1 3/8" - 1 3/4"B520-652

CYLINDERS • DeadboltsCylinders Only, B100, B250, B400 E/B, H, MDand S200-Series (S200 ordered before Feb, 2008)Description Part Number Price Each5-Pin C, CE, E, F only 22-001 $50.006-Pin Conventional 22-002 50.00Primus ® 20-729* 92.00Primus XP 20-729-XP 92.00Primus UL437 20-529* 112.00Primus XP UL437 20-529-XP 112.00B100, B250, B400, E/B,H, MD, S200-SeriesCylinder Only* Must be used in locks with universalhousings (B202-824 or B202-825).Cylinders S200-Series(For Locks after Feb 26, 2008)Description Part Number Price Each6-Pin Conventional 22-081 $50.00Primus ® 24-769 92.00Primus XP 24-769-XP 92.00Primus UL437 24-569 112.00Primus XP UL437 24-569-XP 112.00Single CylinderNotes: 1) Finishes: 606 and 626.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.UniversalHousing(steel)UniversalHousing(steel)5-Pin Cylinder Retaining Screw Location6-Pin Cylinder Retaining Screw LocationHousings With and Without Cylinders (S200 ordered before Feb, 2008)PriceSeries Housing Description Outside Inside Each5-Pin C, CE, E, F 22-017 22-018 $73.00B250, B400, E/B (Primus 6-Pin Conventional 22-019 22-020 73.00only), H (except H160), Primus 20-730 20-731 115.00S200 Universal (steel) Primus XP 20-730-XP 20-731-XP 115.00Primus UL437 20-530 20-531 136.00Primus UL437 XP 20-530-XP 20-531-XP 136.00Housing only B202-824 B202-825 21.40Cylinders & Housings, S200-Series (For Locks after Feb 26, 2008)Description Part Number Price Each6-Pin Conventional 22-082 $73.00Primus ® 24-770 115.00Primus XP 24-770-XP 115.00Primus UL437 24-570 136.00Primus XP UL437 24-570-XP 136.00Housing Only B202-824 21.40Notes: 5) Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings. Cylinders available 606 and 626 only.6) Specify keyway to distinguish between Everest and Classic. Example: C or CP (Classic) vs. C123 (Everest).7) Certain functions of H and S200-Series locksets require a key-in-knob/lever cylinder as well.8) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.9) For Everest ® D Family restricted keyways (Quad, Numbered, Reversed), add $10.00 per cylinder or core.See Terms & Conditions for more information.Cylinder Retaining ScrewPart Number Description Price EachB520-298 Retaining screw for all models above $0.52CYL-18Price Book 72AEffective July 18, 2011 • Rev. 7/11

B250, H, S200-SeriesFull Size Interchangeable CoreDeadbolts • CYLINDERSFull Size ICLow, 10-32 BoltsB250, H and S200-Series Interchangeable Core CylindersPart PriceSeries Core Mechanism Side Number EachB250, H, S200 Housing Less CoreOutside 22-061Inside 22-06253.00Cylinders S200-Series(For Locks after Feb 26, 2008)Description Part Number Price EachHousing Less Core S306-135 $54.5010-32 Bolts,Angled DriverNotes: 1) Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores and cylinders only.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.4) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.5) Control keys are not furnished with IC cylinders and must be ordered separately.6) For construction cores, see Keys & Keying: Construction Core Program.7) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.Miscellaneous Parts for B250 Style IC CylindersPartPriceNumber Description Each36-086* Collar (trim ring) $6.30B520-235 Driver 3.30B520-240 Waldes retainer (order in multiples of 100) 0.32B520-541 Security insert for collar 7.00* Specify finish: 605, 609, 612, 613, 625, 626.Miscellaneous S200-Series (For Locks after after Feb 26, 2008)Part Number Description Price Each36-086* Collar (Trim ring) $6.60B520-541 Security insert for collar 7.00B600-029 Driver 3.30B600-032 Cotter Pin (order in multiples of 100) 0.32B600-041 Tailpiece (IC) 1.70B520-685 Tailpiece 1.70B600-071 Washer 0.52For cores,see CYL-42Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-19

CYLINDERS • DeadboltsB100, B250, B450, E/B, H, MD, S200-SeriesCollars and TailpiecesCollars (Trim Rings and Security Inserts), B100, B250, B400, E/B,H, MD and S200-SeriesPart Number Specify Finish Description Price Each02-037 • MD160 Series decorative cylinder rose, specify design $7.0036-066 • Trim ring, 1/8" 6.0036-067 • Trim ring, 7/16" 8.3036-068 Security insert, 1/8" 3.7036-069 Security insert, 7/16" 7.2036-070 Security insert pack, 36-068 1/8" and 36-069 7/16" 11.0036-071 • Trim ring and security insert pack, 36-066 and 36-068 1/8" 9.5036-072 • Trim ring and security insert pack, 36-067 and 36-069 7/16" 15.40B520-541* Security insert, 1" for interchangeable core 11.4036-085 • Trim ring and security insert pack, B520-541 and 36-086 1" 17.8036-086 • Trim ring, 1" 6.30* B520-541 was 36-084Lazy Tailpieces, B100, B250, B400, E/B, H, MD and S200-SeriesPart Number Description Price Each Part Number Description Price EachB202-267 Single cylinder 1.180" $1.50 B220-036 Double cylinder 1.375" $4.60B202-269 Double cylinder 0.810" 1.50 B502-999 S200 2.500" 2.40B202-369 Double cylinder 0.685" 1.50 B520-236 Double cylinder 1.325" 3.40B202-370 Double cylinder 0.550" 1.50 B520-237 Double cylinder 1.100" 3.40B202-453 Double cylinder 0.622" 5.60 B520-242 Single cylinder 2.200" 8.00B202-557 Single cylinder 1.850" 1.50 B520-243 Single cylinder 2.600" 8.00B202-558 Single cylinder 2.000" 1.50 B590-443 Single cylinder 1.470" 1.70B202-580 Double cylinder 0.450" 1.60 E205-204 Single cylinder 3" breakoff 5.60B202-957 Single cylinder 1.410" 1.50 G570-159 H160 2.250" 8.10B220-032 Double cylinder 1.031" 1.50 G570-160 H160 2.500" 5.60Drivers for Lazy TailpiecesPart Number Description Price EachB520-375 Classic Non Modular $1.70B502-949 Modular Cylinder All Keyway Families (Classic, Everest & Primus) 0.98Tailpieces and Collars Application Chart, B100, B250, B400, E/B,H, MD and S200-SeriesTailpieceFunction Cylinder Door Thickness (See Above) Collar(s)B160, F160 (discontinued)5-Pin1 3/8" – 1 3/4" B202-5571 13/16" – 2 1/4" B202-5586-Pin1 5/8" – 1 3/4" B202-5571 13/16" – 2 1/4" B202-5581"5-Pin1 5/16" – 1 5/8" B202-2691 5/8" – 1 13/16" B220-032B162, F162 (discontinued) 1 5/8" – 1 11/16" B202-269 1"6-Pin 1 11/16" – 2" B220-0322" – 2 1/4" B220-036B180 (discontinued) — 1 3/8" – 2 1/4" B590-443 1"CYL-20Price Book 72AEffective July 18, 2011 • Rev. 7/11

B100, B250, B450, E/B, F100, H, MD, S200-SeriesTailpiece and Collar Application ChartDeadbolts • CYLINDERSTailpieces and Collars Application Chart, B100, B250, B400, E/B,F100, H, MD and S200-Series (Continued)TailpieceCollar(s)Model/Function Cylinder Door Thickness (See CYL-20) (See CYL-20)1 5/16" – 1 5/8" B202-558 7/16" + 1/8"5-Pin 1 11/16" – 2 1/4" B202-558 7/16"over 2 1/4" – 2 9/16" B202-558 1/8"1 5/16" – 1 3/8" B202-558 Two 1/8" & One 7/16"1 7/16" – 1 15/16" B202-558 7/16" + 1/8"B250 6-Pin 2" – 2 3/8" B202-558 7/16"B460 (discontinued) over 2 3/8" – 2 9/16" E205-204 7/16"2 5/8" – 2 3/4" B202-558 1/8"1 5/16" – 1 1/2" B520-242 1" + 1/8"over 1 1/2" – 2 1/8" B520-242IC over 2 1/8" – 2 3/8" B520-2431"over 2 3/8" – 2 5/8" B520-243 7/16" + 1/8"over 2 5/8" – 3 1/8" B520-242 7/16B251 (discontinued) N/A – B202-267 —1 5/16" – 1 3/8" B202-3701 1/2" – 1 5/8" B202-2697/16" + 1/8"5-Pin1 11/16" – 1 15/16" B202-5802" – 2 3/8" B202-2697/16"2 7/16" – 2 11/16" B202-4532 3/4" – 2 7/8" B202-2691/8"1 3/16" – 1 3/8" B202-269 Two 1/8"1 7/16" – 1 1/2" B202-370B252 1 9/16" – 1 15/16" B202-3697/16" + 1/8"B462 (discontinued) 6-Pin 2" – 2 3/16" B202-3702 1/4" – 2 11/16" B202-2697/16"2 3/4" – 2 13/16" B202-3702 7/8" – 3 1/8" B202-3691/8"1 5/16" – 1 5/8" B520-237 1" + 1/8"over 1 5/8" – 1 7/8" B520-237 1"IC over 1 7/8" – 2 1/8" B520-236 1"over 2 1/8" – 2 3/8" B520-236 7/16" + 1/8"over 2 5/8" – 3 1/8" B520-236 7/16"B460N, E(B)51N, EB52N lower(discontinued)6-Pin 1 3/4 – 2 1/4" E205-204 (by design)B462N, 1 3/4" B202-369EB52N upper, 6-Pin 2" B202-269 (by design)inside (discontinued) 2 1/4" B220-032B462N, 1 3/4" B202-370EB52N upper, 6-Pin 2" B202-369 (by design)outside (discontinued) 2 1/4" B202-2695-Pin1 3/8" 7/16" + 1/8"1 3/4"B202-5587/16"H except H1606-Pin1 3/8" 7/16" + two 1/8"1 3/4" 7/16" + 1/8"IC1 3/8"B520-2421" + 1/8"1 3/4" 1"H160 (discontinued)6-Pin1 3/4" G570-1592" G570-1607/16"MD160 (discontinued)5-Pin 1 5/8" – 2"B202-957MD162 (discontinued) B202-26902-0376-Pin1 3/8" – 1 5/8"B502-9991" + 1/8"S200 (for locks ordered before1 5/8" – 2" 1"February 2008)IC1 3/8" – 1 5/8" B520-242 1" + 1/8"1 5/8" – 2" B520-243 1"Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-21

CYLINDERS • DeadboltsB300, BA300, F300, FA300-SeriesComplete CylindersB360/F360 Cylinder and PartsBA360/FA360 Cylinder and PartsOutside cylinder housingFriction insertCylinder retaining screw(Position varies for 5 or 6-pin cylinder.)B362/F362 Cylinder and PartsBA362/FA362 Cylinder and PartsOutside cylinder housingFriction insertCylinder retaining screw (2)(Position varies for 5 or 6-pin cylinder.)CylinderCrank and pinCrank and pinCrank RetainerCrank RetainerCylindersInside cylinder housingCylinders Only, B300, F300 and BA300, FA300 SeriesDoor Part PriceFunction Pins Thickness Number EachB360 5-Pin 1 3/8" – 1 3/4" 23-037 $37.00B360, F360 6-Pin 1 5/8" – 2" 23-038 37.00BA360, FA360 5-Pin 1 3/8" – 1 3/4" 23-045 37.00B362 5-Pin 1 3/8" – 1 3/4"23-039(Matching Pair) 23-04074.00B362, F362 6-Pin 1 5/8" – 2"23-041(Matching Pair) 23-04274.00BA362, FA362(Matching Pair)5-Pin 1 3/8" – 1 3/4" 25-019 74.00F393 Dummy Cylinder & Housing N/A 1 5/8" – 2" B302-430 34.00FA393 Dummy Cylinder & Housing N/A 1 5/8" – 2" F306-139 34.00Notes: 1) Finishes: 606 and 626 only.2) Not available in Primus ® or Everest ® .Cylinder Housings, B300 and F300-SeriesPartPriceNumber Description EachB302-020 Outside, B360, B362B302-220 Inside, B362, F362 $12.20B302-420 Outside, F360, F362Note: 3) Finishes: 505, 605, 609, 613, 619, 620, 625 and 626.CYL-22Price Book 72AEffective July 18, 2011 • Rev. 7/11

B300, F300, BA300, FA300-SeriesPartsDeadbolts • CYLINDERSTailpieces and Drivers, B300, F300, BA300, FA300-SeriesPart Description PriceNumber Function Door Thickness Length EachTailpiecesB300-111 B360 5-Pin: 1 3/8" – 2" 1.895"B360, F360 6-Pin: 1 5/8" – 2 1/4"B362, BA362, FA362 outside 5-Pin: 1 3/8" – 1 3/4"B300-2100.970" $4.10B362, F362, outside 6-Pin: 1 5/8" – 2"B300-211 B362, BA360, FA360 outsideDrivers5-Pin: over 1 3/4" – 2" 1.470"6-Pin: over 2" – 2 1/4"B300-203 B362, BA362, FA362 inside 5-Pin: 1 3/8" – 2" 0.509" $1.30B362, F362 inside 6-Pin: 1 5/8" – 2 1/4"Miscellaneous Cylinder Parts, B300, BA300, F300 and FA300-SeriesPartPriceNumber Description EachB300-108 Cylinder retainer screw $1.00B500-306 Crank spacer for thick doors, B360, B362 (new style)B300-118 Friction insert, outside housing, B360, B362, F360, F362, BA360, BA362. FA360, FA362B300-120 Crank Spring, BA360, BA362, FA360, FA362B300-130 Washer, cylinder bar, B360, B362, F360, F362, BA360, BA362, FA360, FA3620.90B500-304 Crank retainer, B360, F360 (new style)B500-305 Crank retainer, B362, F362, BA362, FA362 (new style)B302-001 Crank and pin, B360, F360 4.60B302-002 Crank and pin, B362, F362, BA360, BA362, FA360, FA362 5.00Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-23

CYLINDERS • DeadboltsB600/700/800-SeriesNon-IC Reference TableSingle CylinderDouble CylinderB600/700/800-Series Cylinder Reference TableCylinderLess Plug ShellCylinder Door Housing Price Keyway (See (See TailpieceMechanism Function Thickness Each Type CYL-55) CYL-57) (See CYL-26)B660, B663 1 3/8" – 2 1/2" 22-644Classic 33-167 A508-653 B610-084Everest 33-138 A508-653 B610-0841 3/8" – 2" 22-642Classic 33-167 A508-653 B610-082Everest 33-138 A508-653 B610-082B661, B664B600-Series2" – 2 1/2" 22-643$50.00 Classic 33-167 A508-653 B610-083Conventional Everest 33-138 A508-653 B610-083B6621 3/8" – 2" 22-085Classic 33-167 A508-653 B610-085Everest 33-138 A508-653 B610-0852" – 2 1/2" 22-086Classic 33-167 A508-653 B610-086Everest 33-138 A508-653 B610-086B760, B763 1 3/8" – 2 1/2" 20-744Classic 33-136Everest 33-119B610-0841 3/8" – 2" 20-742Classic 33-136B610-082Everest 33-119B761, B764B700-Series2" – 2 1/2" 20-743Classic 33-136 A508-655B610-083Primus ® Everest 33-119B762Classic 33-1361 3/8" – 2" 20-745B610-085Everest 33-1192" – 2 1/2" 20-746Classic 33-136B610-08692.00 Everest 33-119B760-XP,1 3/8" – 2 1/2" 20-744-XPClassic 33-136B763-XP Everest 33-119B610-0841 3/8" – 2" 20-742-XPClassic 33-136B761-XP, Everest 33-119B610-082B700-Series B764-XP2" – 2 1/2" 20-743-XPClassic 33-136 A508-655Primus-XP Everest 33-119B610-083B762-XPClassic 33-1361 3/8" – 2" 20-745-XPB610-085Everest 33-1192" – 2 1/2" 20-746-XPClassic 33-136B610-086Everest 33-119CYL-24Price Book 72AEffective July 18, 2011 • Rev. 7/11

B600/700/800-SeriesNon-IC Reference TableDeadbolts • CYLINDERSB600/700/800-Series Cylinder Reference Table (continued)CylinderLess Plug ShellCylinder Door Housing Price Keyway (See (See TailpieceMechanism Function Thickness Each Type CYL-55) CYL-57) (See CYL-26)B860, B863 1 3/8" – 2 1/2" 20-544Classic 33-154Everest 33-2211 3/8" – 2" 20-542Classic 33-154Everest 33-221B800-SeriesB861, B8642" – 2 1/2" 20-543Classic 33-154 A508-655Primus UL437 Everest 33-2211 3/8" – 2" 20-545Classic 33-154Everest 33-221B8622" – 2 1/2" 20-546Classic 33-154$112.00 Everest 33-221B860-XP,1 3/8" – 2 1/2" 20-544-XPClassic 33-154B863-XP Everest 33-2211 3/8" – 2" 20-542-XPClassic 33-154B861-XP, Everest 33-221B800-Series B864-XP2" – 2 1/2" 20-543-XPClassic 33-154 A508-655Primus-XP UL437 Everest 33-2211 3/8" – 2" 20-545-XPClassic 33-154Everest 33-221B862-XP2" – 2 1/2" 20-546-XPClassic 33-154Everest 33-221Notes: 1) Finishes: 606 and 626 only.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.4) For Everest ® D Family restricted keyways (Quad, Numbered, Reversed), add $10.00 per cylinder or core.See Terms & Conditions for more information.B610-084B610-082B610-083B610-085B610-086B610-084B610-082B610-083B610-085B610-086Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-25

CYLINDERS • DeadboltsB600/700/800-SeriesNon-IC Cylinders, Parts and TailpiecesMiscellaneous Parts, B600/700/800-SeriesPartNumber DescriptionPriceEachB520-298 Cylinder retaining screw $0.52B600-015* 7/8" Collar (trim ring) for 1 5/8" – 2 1/2" door (standard) 41.20B600-016* 1 1/8" Collar (trim ring) for 1 3/8" – 1 5/8" door 42.20B600-090* Housing, inside 21.60B600-092* Inside snap-on face plate 1.70B610-024* Dummy cylinder faceplate and outside housing 34.00B610-025* Housing, outside 21.60B610-071 Washer 0.52C603-098 Security disc (Order in multiples of 100) 0.16* Specify finish: 605, 609, 612, 613, 625 and 626.Tailpiece and Retainer Packs, B600/700/800-SeriesPartNumber DescriptionPriceEachB610-041 B680 (non-keyed) $6.50B610-042 B661, B664 Classic Conventional Non Modular 4.90B610-083 B661, B664 Classic Conventional thick door Non Modular 4.90B610-085 B660, B663 Classic Conventional Non Modular 4.90B610-085 B662 Classic Conventional Non Modular 6.50B610-046 B662 Classic Conventional thick door Non Modular 6.50B610-082 4.50B610-083 5.50B610-084 Modular Cylinder All Keyway Families (Classic, Everest & Primus) 8.90B610-085 8.90B610-086 8.90* See reference table on CYL-24 and CYL-25.Note: 1) For interchangeable core tailpieces see CYL-27.For pins, springs, etc.,see CYL-50.CYL-26Price Book 72AEffective July 18, 2011 • Rev. 7/11

B600/700/800-SeriesIC Housings and PartsDeadbolts • CYLINDERSFull Size IC1/4-28 Bolts,Angled DriverSmall Format IC1/4-28 BoltsB600/700-Series IC Housings Less CorePart PriceCylinder Type Housing Number EachFull Size Outside B610-027*Interchangeable Core Inside B610-028$46.80Small Format Outside B610-282*Interchangeable Core Inside B610-28144.70* Specify finish: 605, 609, 612, 613, 625, 626.Notes: 1) SFIC housings do not include tailpieces.2) For cores see Interchangeable Cores.3) For construction cores, see Keys & Keying: Construction Core Program.4) Conventional full size cylinders are not available 0-bitted and if requested, will be converted to1-bitted cylinders. For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk PackInterchangeable Cores are recommended.Miscellaneous Parts for B600/700-Series IC CylindersPartPriceNumber Description EachB202-370 Tailpiece, B662BD $1.80B202-453 Tailpiece, B662BD thick door 6.00B202-557 Tailpiece, B660BD 1.80B220-032 Tailpiece, B661BD 1.80B600-016* 1 1/8" Collar, B600 all IC models 43.90B520-240 Waldes retaining ring B662J (order in multiples of 100) 0.33B600-029 Driver, B660/662J/663J 3.40B610-032 Cotter pin for tailpiece, B660/662J/663J (1 = pack of 50) 29.80B600-106 Driver, SFIC 11.60B600-107 Throw member for SFIC models 2.10B600-108 Waldes retaining ring B660/662BD (order in multiples of 100) 0.17B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks 6.60B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks 6.80B610-040 Tailpiece and cotter pin, B662J 9.80B610-041 Tailpiece and cotter pin, B660J, B661J, B663J 6.80* Specify finish: 605, 609, 612, 613, 625, 626.For pins, springs, etc.,see CYL-50.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-27

CYLINDERS • MortiseStandard Cylindersfor L-Series Locks, Exit DevicesCylinder OnlyCylinder with Compression Ring & SpringMortise CylindersComplete PriceCam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside)CYL-28L583-153L583-274Everest ® For cyl. length 1 1/8",& Primus ® 1 3/8", 1 5/8"YL583-254ClassicConventionalYXXDim.X = .252Y = .638Dim.X = .252Y = .638YL583-275For cyl. length 1 1/4",1 1/2", 1 3/4"YXDim. X = .261Y = .644XDim. X = .261Y = .644Schlage L9060 Outside and Other Straight Cam ApplicationsL583-476B502-948For cyl. length 1 1/8",Everest & Primus1 3/8", 1 5/8"YB502-191Classic ConventionalYXDim.X = .338Y = .71XDim.X = .338Y = .71YL583-477For cyl. length 1 1/4",1 1/2", 1 3/4"-477YXDim. X = .35Y = .72XDim. X = .35Y = .72Also for Schlage K-Series (discontinued), Falcon ® nondeadboltfunctions, Adams Rite ® 2331 deadlocks,Baldwin ® mortise locks, Corbin Russwin ® ML2242 insideand ML2255.Von Duprin ® exit devices use 1 1/4" cylinder (dim =114).To order dogging cylinders for Von Duprin ® exit devices,specify complete cylinder andXQ11-947** for Classic conventional cylinders orXQ11-949** for Everest and Primus cylinders.Available at no additional charge.Conventional 30-021 $55.00Cylinder Only: Primus Controlled Access 20-793 98.00L & N Primus XP Controlled Access 20-793-XP 98.00EscutcheonsPrimus UL437 20-593 124.00Primus XP UL437 20-593-XP 124.00Hotel Function (conventional) 30-022* 88.00Conventional 30-001 63.00Cylinder With Primus Controlled Access 20-787 104.00Compression Primus XP Controlled Access 20-787-XP 104.00Ring & Spring: Primus UL437 20-587 121.00Rose Trim Primus XP UL437 20-587-XP 121.00Primus Lockout 20-717 136.00Primus XP Lockout 20-717-XP 136.00Primus UL437 Lockout 20-517 149.00Primus XP UL437 Lockout 20-517-XP 149.00Hotel Function (conventional) 30-002* 94.00Cylinder Only: Conventional 26-021 $55.00L & N Primus Controlled Access 20-701 98.00Escutcheons Primus XP Controlled Access 20-701-XP 98.00Primus UL437 20-501 124.00Primus XP UL437 20-501-XP 124.00Conventional 20-001 63.00Cylinder With Primus Controlled Access 20-700 104.00Compression Primus XP Controlled Access 20-700-XP 104.00Ring & Spring:Rose TrimPrimus UL437 20-500 121.00Primus XP UL437 20-500-XP 121.00Primus Lockout 20-715 136.00Primus XP Lockout 20-715-XP 136.00Primus UL437 Lockout 20-515 149.00Primus XP UL437 Lockout 20-515-XP 149.00Cylinder WithComp. Ring &Conventional20-002 74.001/8" Blocking Ring:(available in 1-1/8” only)Adams Rite 2331Price Book 72AEffective July 18, 2011 • Rev. 7/11* Specify hand for hotel function cylinders. Not available in Primus. Furnished 0-bitted; emergency keys must be ordered separately.** Subject to Specials discounting and extended factory lead time.Notes: See facing page.

Standard Cylindersfor Adams Rite LocksMortise • CYLINDERSMortise Cylinders (cont’d)Complete PriceCam Description Cylinder Mechanism Cylinder EachAdams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 SeriesB502-944L583-446 Cylinder Only Conventional 26-072 $55.00Everest ® & Primus ® For cyl. length 1 1/8",Primus Lockout 20-718 136.001 3/8", 1 5/8"Cylinder With Primus XP Lockout 20-718-XP 136.00XYXYCompression Primus UL437 Lockout 20-518 149.00Ring and SpringPrimus XP UL437 Lockout 20-518-XP 149.00B502-292Classic ConventionalYDim.X = .187Y = .562Dim.X = .187Y = .562Adams Rite 4070 SeriesXDim. X = .19Y = .57L583-447For cyl. length 1 1/4",1 1/2", 1 3/4"7Cylinders with these cams include set screw packB220-050 for Adams Rite locks.YXDim. X = .19Y = .57Conventional 20-013 63.00Cylinder With Primus Controlled Access 20-706 104.003/8" Blocking Ring Primus XP Controlled Access 20-706-XP 104.00Primus UL437 20-506 121.00Primus XP UL437 20-506-XP 121.00B502-945Everest & PrimusYB502-380Classic ConventionalYXDim.X = .323Y = .627XDim.X = .323Y = .627B520-743For cyl. length 1 1/8",1 3/8", 1 5/8"YB520-744For cyl. length 1 1/4",1 1/2", 1 3/4"YXDim. X = .33Y = .63XDim. X = .33Y = .63Conventional 26-073 $55.00Cylinder Only Primus Controlled Access 20-708 98.00Primus XP Controlled Access 20-708-XP 98.00Primus UL437 20-508 121.00Primus XP UL437 20-508-XP 121.00Notes: 1) Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $31.80. Everest hotel function cylinders areavailable 1 1/8", 1 1/4" and 1 3/8" only. See Special Cylinders for 2" - 5" long cylinders.2) 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim anddoor thickness. See page CYL-36 for required dimension.3) Housing finishes: 605, 606, 612, 613, 619, 625 and 626.4) Plug finishes: 606 and 626 only.5) To order less Schlage logo specify cylinder “with K510-612 faceplate”.6) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.7) Lockout keys are not furnished with cylinders and must be ordered separately.8) Lockout cylinders are not available master keyed.9) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.10) For cams and other parts, see page CYL-31.11) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness.For keying in thefield, order 10-pieceBulk Pack Cylinders.Cylinders are sub-assembledto save time!See CYL-5Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-29

CYLINDERS • MortiseConcealed ShellL-SeriesConcealed Shell Mortise CylindersComplete PriceCam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside)L583-254L583-153ClassicEverest ®Conventional& Primus ®Conventional 30-004 $74.00XPrimus Controlled Access 20-789 108.00YSchlage L9060 OutsideB502-191ClassicConventionalYDim.X = .252Y = .638XYXDim.X = .252Y = .638B502-948EverestConventionalYXCylinder Only: Primus XP Controlled Access 20-789-XP 108.00L EscutcheonPrimus UL437 20-589 124.00Cylinder Only:L EscutcheonPrimus XP UL437 20-589-XP 124.00Hotel Function (conventional) 30-005* 97.00Conventional 26-023 $74.00Primus Controlled Acess 24-767 108.00Primus Controlled Acess-XP 24-767-XP 108.00Dim.X = .338Y = .71Dim.X = .338Y = .71Primus UL437 24-567 124.00Primus XP UL437 24-567-XP 124.00* Specify hand for hotel function cylinders. Not available in Primus. Emergency keys must be ordered separately.Notes: 1) Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $31.80. Extended lengths are available.See Special Cylinders. Everest hotel function cylinders are available 1 1/8", 1 1/4" and 1 3/8" only.2) 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim anddoor thickness. See page CYL-36 for required dimension.3) Finishes: 606 and 626.4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families.. See Terms & Conditions for more information.Cams for Competitors’ Cylinders in Schlage Locks*L583-197Sargent and Yale non-IC (was XL11-758)L583-198Corbin Russwin non-IC (was XL11-545)XL11-895Corbin Russwin* Sold separately only.CYL-30Price Book 72AEffective July 18, 2011 • Rev. 7/11

Non-IC Camsand Dummy CylinderMortise • CYLINDERSCams Non Modular CylindersPartPriceNumber Description EachB502-191 L9060 Straight Classic Conventional $2.30B502-292 Adams Rite MS Classic Conventional 2.30B502-380 Adams Rite 4070 Classic Conventional 8.10B502-944 Adams Rite MS Everest ® & Primus ® 2.30B502-945 Adams Rite 4070 Everest & Primus 8.10B502-948 L9060 Straight Everest & Primus 2.30L583-153 L-Series Everest & Primus 2.30L583-197 L-Series for Sargent and Yale non-IC cylinders 8.10L583-198 L-Series for Corbin Russwin non-IC cylinders 8.10L583-254 L-Series Classic Conventional 2.30XQ11-935* Inverted straight Everest and Primus (dogging) 2.30XL11-895 L-Series for Corbin Russwin 8.10* Subject to Specials discounting and extended factory lead time.Cams - Modular CylindersPartPriceNumber Description EachL583-476 L9060 for cyl. lengths 1-1/8”, 1-3/8” and 1-5/8” $2.30L583-477 L9060 for cyl. lengths 1-1/4”, 1-1/2” and 1-3/4” 2.30B520-743 Cam, Cyl, Mortise. A/R 4070 for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 8.10B520-744 Cam, Cyl, Mortise. A/R 4070 for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 8.10L583-446 Adams Rite MS for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 2.30L583-447 Adams Rite MS for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 2.30L583-474 L-Series for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 2.30L583-475 L-Series for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 2.30B520-740 Inverted Straight Cam (dogging) for cyl lengths 1-1/8”, 1-3/8” and 1-5/8” 2.30B520-741 Inverted Straight Cam (dogging) for cyl lengths 1-1/4”, 1-1/2” and 1-3/4” 2.30Cam Screws For Non Modular CylindersPartPrice EachNumber Description (Order in multiples of 100)B502-468 Classic conventional up to 1 3/8" $0.16B502-942 Everest & Primus up to 1 3/8" 0.30B502-943 Everest & Primus over 1 3/8" 0.42B590-295 Classic conventional over 1 3/8" 0.30Cam Screws For Modular CylindersPartPrice EachNumber Description (Order in multiples of 100)B520-690 Camscrew, (5-40 x 1/2”) for 1-1/8” & 1-1/4” cylinder length $0.12B520-691 Camscrew, (5-40 x 3/4”) for 1-3/8” & 1-1/2” cylinder length 0.28B520-692 Camscrew, (5-40 x 1”) for 1-5/8” & 1-3/4” cylinder length 0.38Modular Cylinder Housing ScrewsB520-693 Modular Housing Screw (8-32 x 7/8”) $1.00Dummy CylinderPartPriceNumber Description Length Each38-070 Dummy cylinder only, less ring and cam 1 1/8", 1 1/4", 1 3/8", 1 1/2" $46.00Note:1) For thumbturn cylinders see page L-36.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-31

CYLINDERS • MortiseFull Size Interchangeable Core,Full Size Interchangeable CoreComplete PriceCam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside)CYL-32L583-255Housing Only Housing Less Core 30-016 $46.00Conventional Core 30-008* 108.00Cylinder With Primus ® Core 20-798 151.00Compression Primus ® XP Core 20-798-XP 151.00Ring & Spring: Faculty Res. Function Core 30-010** 108.00L & N Escutcheons Housing Less Core 30-007 53.00Conventional Core 30-138* 117.00Cylinder With Primus Core 20-776 160.00Compression Ring, Primus XP Core 20-776-XP 160.00Spring, and 3/8" Blocking Faculty Res. Function Core 30-140** 117.00Ring: Rose Trim Housing Less Core 30-137 62.00Schlage L9060 OutsideK510-680Housing Only Housing Less Core 30-032 $46.00YXCylinder WithCompression Ring &Conventional Core 30-030* 108.00Spring: L & N Primus Core 20-782 151.00Escutcheons Primus XP Core 20-782-XP 151.00Cylinder WithDim.Compression Ring,Primus Core 20-783 160.00X = .338Spring, and 1/2" BlockingY = .778Primus XP Core 20-783-XPRing: Rose Trim***160.00Von Duprin, Monarch and Other Straight Cam ApplicationsK510-730Housing Only Housing Less Core 20-059 $46.00YXConventional Core 26-091* 108.00Cylinder WithCompression Primus Core 20-763 151.00Ring & Spring Primus XP Core 20-763-XP 151.00Dim.X = .338Y = .71Also for Schlage K-Series (discontinued), Falcon ® non-deadboltfunctions, Von Duprin & Monarch exit devices, Adams Rite ®2331 deadlocks, Baldwin ® mortise locks, Corbin Russwin ®ML2242 inside and ML2255, Best 30H latch function.For dogging cylinders for Von Duprin exit devices,specify complete cylinder (with core) andXQ11-948.**** Available at no additional charge.Housing Only Housing Less Core 26-064 54.00Conventional Core 20-061* 117.00Cylinder With Primus Core 20-771 160.00Compression Ring,Spring, and 3/8" Primus XP Core 20-771-XP 160.00Blocking Ring Housing Less Core 26-094 62.00* To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details.** Specify hand for hotel function cylinders. Not available in Primus. Emergency key must be ordered separately.*** For this configuration with conventional core, order 30-030 cylinder and 36-082-050 blocking ring.**** Subject to Specials discounting and extended factory lead time.Notes: See facing page.YXDim.X = .252Y = .638Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Interchangeable Core,Cams and PartsMortise • CYLINDERSFull Size Interchangeable Core (cont’d)Complete PriceCam Description Cylinder Mechanism Cylinder EachAdams Rite MS, 4500, 4700 SeriesK510-711Cylinder Only Housing Less Core 20-060 $46.00XYCylinder WithCompression Conventional Core 26-098* 108.00Ring & SpringDim.X = .187Y = .562Cylinders with this cam include set screw pack B220-050for Adams Rite locks.Adams Rite 4070 SeriesB520-378Cylinder WithCompression Ring, SpringConventional Core 20-062* 126.003/16" and 3/8"Blocking RingsPrimus ® Core 20-766 169.00Primus ® XP Core 20-766-XP 169.00Cylinder Only Housing Less Core 20-090 $46.00YXDim.X = .323Y = .627Cylinder WithCompression Ring, SpringConventional Core 20-091* 126.003/16" and 3/8"Blocking Rings Primus Core 20-722 169.00Primus XP Core 20-722-XP 169.00* To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details.Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.2) Core finishes: 606 and 626 only. For core only, see Interchangeable Cores.3) Control keys are not furnished with cylinders and must be ordered separately.4) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus cylinders are required less key blanks.Deduct $10.40 per cylinder.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) 2 1/4" through 5" cylinders are available. See Special Cylinders CYL-51 for more information.7) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Coresare recommended.8) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness.Interchangeable Core CamsPartPriceNumber Description EachB520-378 Adams Rite 4070 $8.10K510-680 L9060 Outside 2.30K510-711 Adams Rite MS 2.30K510-730 Straight cam 2.30L583-255 L-Series (except L9060 outside) 2.30B520-698 Falcon Series MA Mortise Lock 8.10Other Full Size IC Mortise Cylinder PartsPartPriceNumber Description EachL583-200 Cam screw (order in multiples of 100) $0.20C604-334* Driver, universal 4.00K510-474 Friction washer 1.70* Will upgrade housings manufactured before March 1992 to accept Everest and Primus cores.For plugs, shells, pins, springs, etc.,see CYL-51, CYL-52, CYL-53, CYL-55.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-33

CYLINDERS • MortiseSmall Format Interchangeable CoreSmall Format Interchangeable CoreComplete PriceCam Description Cylinder Mechanism Cylinder EachSchlage L-Series (except L9060 outside)L583-255Cylinder With Compression Everest® Restricted Combinated Core 80-308 $116.00Ring & Spring:Construction Disposable 80-115 54.00XCoreL & N EscutcheonsKeyed 80-138 83.00YHousing less Core 80-108 54.00Everest Restricted Combinated Core 80-301 118.00Cylinder With Compression Construction Disposable 80-109 61.00Dim.Ring, Spring, andX = .2521/4" Blocking Ring: Rose Trim Core Keyed 80-131 91.00Y = .638Housing less Core 80-101 61.00Schlage L9060 OutsideK510-680Everest Restricted Combinated Core 80-304 $116.00Cylinder WithConstruction Disposable 80-112 54.00Compression Ring Core Keyed 80-134 83.00& Spring:Housing Less Core 80-104 54.00Dim.L & N Escutcheons*X = .338Y = .778Von Duprin, Monarch and Other Straight Cam ApplicationsYYK510-730XXEverest Restricted Combinated Core 80-302 $123.00Dim.X = .338Y = .71Also for Schlage K-Series (discontinued),Falcon ® non-deadbolt functions, VonDuprin ® exit devices, Adams Rite ® 2331deadlocks, Baldwin ® mortise locks,Corbin Russwin ® ML2242 inside andML2255.Cylinder With Disposable 80-110 61.00Compression Ring, ConstructionSpring andCore1/4" Blocking RingKeyed 80-132 91.00Housing Less Core 80-102 61.00To order dogging cylinders for VonDuprin ® and Monarch ® exit devices,specify complete cylinder (with core)and XQ11-948**.Available at no additional charge.* For rose trim also order 36-082-050 blocking ring.** Subject to Specials discounting and extended factory lead time.Notes: See facing page.CYL-34Price Book 72AEffective July 18, 2011 • Rev. 7/11

Small Format Interchangeable Core,Cams and PartsMortise • CYLINDERSSmall Format Interchangeable Core (cont’d)Complete PriceCam Description Cylinder Mechanism Cylinder EachAdams Rite MS, 4500 and 4700-SeriesK510-711Everest ® Restricted Combinated Core 80-303 $123.00XYCylinder With CompressionRing, Spring andConstruction Disposable 80-111 61.00Core7/16" Blocking RingKeyed 80-133 91.00Dim.Housing less Core 80-103 61.00X = .187Y = .562Adams Rite 4070 SeriesB520-378YXDim.X = .323Y = .627Cylinder WithCompression Ring,Spring and 1/4"Blocking RingEverest Restricted Combinated Core 80-305 $123.00Construction Disposable 80-113 61.00Core Keyed 80-135 91.00Housing Less Core 80-105 61.00Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.2) Core finishes: 606 and 626 only. For core only, see Interchangeable Cores.3) Control keys are not furnished with cylinders and must be ordered separately.4) Key symbol must be specified. Everest B Family keyways are restricted.See Terms & Conditions for more information.5) All keys for construction cores must be ordered separately.6) Keyed construction cores are assessed a non-refundable handling charge (50-231) per core.See Keys and Keying: Small Format Construction Core Program for details.7) Specify GRN for green or BRN for brown if a specific construction combination is required.8) All SFIC cylinders with Adams Rite MS or 4070 cams are furnished with set screw pack B220-050.9) Cylinder and Blocking Ring combinations are based on 1-3/4” door thickness.Interchangeable Core CamsPartPriceNumber Description EachB520-378 Adams Rite 4070 $8.10K510-680 L9060 Outside 2.30K510-711 Adams Rite MS 2.30K510-730 Straight cam 2.30L583-255 L-Series (except L9060 outside) 2.30Other SFIC Mortise Cylinder PartsPartPriceNumber Description EachB520-484 Cam screw (order in multiples of 100) $0.22B520-483 Throw member (driver) 4.10B220-050 Adams Rite set screw pack 1.70For pins, springs, etc.,see CYL-50.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-35

CYLINDERS • MortiseHow to Measure Mortise Cylinder Lengths, LVFull Face and Interchangeable CoreLENGTHL-Series, LV-SeriesCylinder Length Reference TablesConcealedLENGTHCylinder and Length Requirements, L-SeriesL9050, L9056,L9070,L9076,L9080,L9080EL/EU, L9453,L9456, L9460 perXL11-886 or XL-635,L9464 per XL11-886,L9465, L9473,L9480,L9485 per XL11-557Door Thickness1 3/8" 1 3/4" 2" 2 1/4"Function Trim Cylinder DimensionL460, L464, L9460, L9464 Rose 30-001 118— Escutcheon 30-021 118 114 138 112— Concealed 30-004 118 114 138 112Rose 30-002 — 118L9485 — Escutcheon 30-022 — 114 138 112Concealed 30-005 — 114 138 112Rose 30-002 114 138 112 158L9486 — Escutcheon 30-022 118 114 138 112Concealed 30-005 118 114 138 112Rose 30-001 114 138 112 158L9496 — Escutcheon 30-021 118 114 138 112Concealed 30-004 118 114 138 112L462, L463, L9462, L9463 Rose 30-001 118L9060, L9071, L9077,L9082, L9082EL/EU*,L9457, L9462 perXL11-886, L9464,L9466, L9482—30-001 114 — — —Escutcheon— 30-021 — 118 114 138— Concealed 30-004 — 118 114 138Rose 20-001 118L9060 Outside — Escutcheon20-001 114 — — —26-021 — 118 114 138Concealed 26-023 — 118 114 138Note: 1) Blocking rings and/or compression rings may be required and must be ordered separately.Dimensions for Mortise CylindersCylinder LengthDimension1 1/8" 1181 1/4" 1141 3/8" 1381 1/2" 1121 5/8" 1581 3/4" 134CYL-36Price Book 72AEffective July 18, 2011 • Rev. 7/11

L-Series, LV-SeriesCollar Reference TablesMortise • CYLINDERSFull Size IC Cylinder Blocking Ring Requirements, L-Series, LV-SeriesDoor Thickness1 3/8" 1 3/4" 2" 2 1/4"Dimensions for Blocking RingsFunction Trim DimensionL9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453,L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886,L9465, L9473, L9480, L9485 per XL11-557Blocking RingLength Dimension1/8" 0123 /16" 0181/4" 0255/16" 0313/8" 0377/16" 0431/2" 050Rose 050 037 025 025Escutcheon 025 012 N/R N/RL9485 Rose — 037 025 025Escutcheon — 012 N/R N/RL9486, L9496 Rose 012 N/R N/R N/REscutcheon 025 012 N/R N/RL9060*, L9071*, L9077*, L9082*, L9457*, L9462* per XL11-886, Rose — 050 043 031L9466*, L9482* Escutcheon 025 012 N/R N/RL460, L464, L9460, L9464 Rose 050 037 025 025L462*, L463*, L9462*, L9463* Rose — 050 043 031* 2 Blocking rings required.Notes: 1) Specify blocking ring (36-082), finish and dimension.2) Blocking ring (36-082) must be used with compression ring (36-083).3) N/R = None Required.Small Format IC Cylinder Blocking Ring Requirements, L-Series, LV-SeriesDoor Thickness1 3/8" 1 3/4" 2" 2 1/4"Function Trim DimensionL9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453,L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886,L9465, L9473, L9480, L9485 per XL11-557Rose 037 025 012 N/REscutcheon** N/R N/R N/R N/RL9060*, L9071*, L9077*, l9082*, L9082EL/EU*, L9457*, L9462* Rose — 050 037 025per XL11-886, L9464*, L9466*, L9482*Escutcheon 018 N/R N/R N/RL9496 Rose 025 012 N/R N/REscutcheon N/R N/R N/R N/RL460, L464, L496, L9460, L9464 Rose 037 025 012 N/RL462*, L463*, L9462*, L9463* Rose — 050 037 025* 2 Blocking rings required.** Compression ring not required for doors over 1 9/16˝ thick.Notes: 4) Specify blocking ring (36-082), finish and dimension.5) Blocking ring (36-082) must be used with compression ring (36-083).6) N/R =None Required.Blocking and Compression RingsPart Specify PriceNumber Finish Description Each36-079* • Blocking ring for use without compression ring $9.2036-082* • Blocking ring for use with compression ring 8.0036-083 • Compression ring and spring 6.80L583-195 Compression ring spring 0.82* Specify dimension.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-37

CYLINDERSIngersoll Rand Compatible CamsIngersoll Rand Compatible CamsCams for Schlage CylindersClassic Modular Cyl Modular CylDescription Conventional Interchangeable Everest and Lengths: 1-1/8”, Lengths: 1-1/4”non-IC Core Primus non-IC 1-3/8”, 1-5/8” 1-1/2”, 1-3/4”Schlage L series,except L9060 outside L583-254 L583-255 L583-153 L583-474 L583-475Schlage L9060 outside B502-191 K510-680 B502-948 L583-476 L583-477Schlage K series (discontinued) B502-191 K510-730 B502-948 L583-476 L583-477Falcon M-Series Non-DeadboltFunctions (discontinued)B502-191 K510-730 B502-948 L583-476 L583-477Falcon M-Series deadboltfunctions (discontinued)A09894-001-00* XB12-046 B502-907 N/A N/AFalcon MA-SeriesAll functions except MA381B520-698Von Duprin mortise exit devices B502-191 K510-730 B502-948 L583-476 L583-477Von Duprin mortise exit devices B502-191 per K510-730 per B502-948 perwith dogging XQ11-947 XQ11-948 XQ11-949B520-740 B520-741Glynn-Johnson HL6,except 9060 outside L583-254 L583-255 L583-153 L583-476 L583-477Glynn-Johnson HL6, 9060 outside B502-191 K510-680 B502-948 L583-476 L583-477Schlage CM5500, CM5600,PRO5500, VIP5500, 650 keyswitch B502-191 K510-680 B502-948 L583-476 L583-477Falcon 24/25 exit Device all trimsbut 718C or 718NLA09897-024-00* A12667-003-00* A09897-024-00*Falcon 24/25 exit Device with trims718C or 718NL (Falcon #24 cam)A09894-021-00*A09894-021-00** These part numbers represent Falcon part numbers and are available to order through Falcon.CYL-38Price Book 72AEffective July 18, 2011 • Rev. 7/11

Ingersoll Rand Compatible Cams and TailpiecesRim • CYLINDERSFalcon Retrofit Cylinder Reference TableSide View Lock Cylinder Complete Price Keyway Plug Shell Tailpiece/Series Mechanism Cylinder Each Type CamB611, T381Conventional 21-020 $50.00 ClassicEverest33-13733-138A508-653A508-653IS & W, Primus 20-728 92.00 Classic 33-136all except 561 Primus XP 20-728-XP Everest 33-119 A700-031Primus UL 20-528 112.00 Classic 33-154 A508-655Primus XP UL 20-528-XP Everest 33-221Conventional 24-031 50.00 ClassicEverest33-13733-138A508-653A508-653T, all except381 IS & 571PrimusPrimus XP24-76124-761-XP92.00 ClassicEverest33-13633-119 A508-655 030730-001*Primus UL 24-561Primus XP UL 24-561-XP112.00 ClassicEverest33-15433-221Conventional 24-032 50.00 ClassicEverest33-13733-138A508-653A508-653T571 PrimusPrimus XP24-76224-762-XP92.00 ClassicEverest33-13633-119 A508-655 030730-002*Primus UL 24-562Primus XP UL 24-562-XP112.00 ClassicEverest33-15433-221Conventional 24-033 50.00 ClassicEverest33-13733-138A508-653A508-653W561, knobs PrimusPrimus XP24-76324-763-XP92.00 ClassicEverest33-13633-119 A508-655 Q330-252*Primus UL 24-563Primus XP UL 24-563-XP112.00 ClassicEverest33-15433-221Conventional 24-034 50.00 ClassicEverest33-13733-138A508-653A508-653W561, levers PrimusPrimus XP24-76424-764-XP92.00 ClassicEverest33-13633-119 A508-655 Q330-165*Primus UL 24-564Primus XP UL 24-564-XP112.00 ClassicEverest33-15433-221Conventional 24-035 63.00 ClassicEverest33-406-11833-229-118B220-300B220-122B502-907M, DBfunctionsPrimusPrimus XP24-76524-765-XP104.00 ClassicEverest33-159-11833-134-118 B220-312 B502-907Primus UL 24-565Primus XP UL 24-565-XP124.00 ClassicEverest33-155-11833-220-118Conventional 20-001 63.00 ClassicEverest33-406-11833-229-118B220-300B220-122B502-948M, Non DBfunctionsPrimusPrimus XP20-70020-700-XP104.00 ClassicEverest33-159-11833-134-118 B220-312 B502-948Primus UL 20-500Primus XP UL 20-500-XP124.00 Classic 33-155-118Everest 33-220-118Conventional 23-013 50.00 ClassicEverest33-13733-138A508-653A508-653C604 -524B, all except611PrimusPrimus XP20-75020-750-XP92.00 ClassicEverest33-13633-119 A508-655 C604-243Primus UL 20-550Primus XP UL 20-550-XP112.00 Classic 33-154Everest 33-221* These part numbers represent Falcon part numbers and are available to order through Falcon.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-39

CYLINDERS • RimComplete CylindersVerticle Tailpiece (No. 1 bar)Horizontal Tailpiece (No. 2 bar)Rim CylindersPriceType Cylinder Mechanism Tailpiece Complete EachConventionalHorizontal 20-022Vertical 20-021$55.00StandardHorizontal 20-710(non-IC) Primus ® Vertical 20-70998.00Primus XPHorizontal 20-710-XPVertical 20-709-XP98.00Primus UL437Horizontal 20-510Vertical 20-509124.00Primus XP UL437Horizontal 20-510-XPVertical 20-509-XP124.00LockoutPrimus 20-716Primus XPHorizontal20-716-XPPrimus UL437 20-516Primus XP UL43720-516-XP136.00149.00Notes: 1) Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.2) Plug finishes: 606 and 626 only.3) All items include collar, mounting screws and backplate.4) Tailpiece orientation may be changed in the field. For Von Duprin, Monarch and most other applications,tailpiece should be horizontal.5) Specify keyway to distinguish between Everest and Classic. Example: C or CP (Classic) vs. C123 (Everest).6) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.7) The following keys are not furnished with cylinders and must be ordered separately:• control keys• operating keys for construction cores• lockout keys8) Lockout cylinders are not available master keyed.9) To order less logo, specify:“with K510-612 faceplate” for standard cylinder.“with 23-031 core” for full size interchangeable core cylinder.10) Standard (non-IC) cylinders are available for application that is thicker than 3" ( combined door & device trim thickness)over 3" thick and available with special mounting screw locations for Sargent exit devices. See Special Cylinders CYL-51.11) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.12) Conventional full size IC cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.For keying in the field, order 10-pieceBulk Pack Cylinders.Cylinders are sub-assembled to save time!See CYL-5CYL-40Price Book 72AEffective July 18, 2011 • Rev. 7/11

PartsRim • CYLINDERS20-057Rim CylindersPriceType Cylinder Mechanism Tailpiece Complete EachFull SizeInterchangeable CoreConventional Core 20-057* $103.00Primus CoreConvertible20-757 144.00Small FormatInterchangeable CorePrimus XP Core 20-757-XP 144.00Housing only-less core 20-079 46.00Everest ® Restricted Combinated Core 80-329** 108.00Keyed Construction CoreHorizontal80-159*** 75.00Disposable Construct. Core 80-116 46.00Housing only-less core 80-129 46.00* To order with construction core, see Keys and Keying: Full Size Construction Core Program.** Key symbol must be specified. Everest B Family keyways are restricted. See Terms & Conditions for more information.*** Specify GRN for green or BRN for brown construction cores. A non-refundable handling charge (50-231) is assessed per core.See Keys and Keying: Small Format Construction Core Program for details.Rim Cylinder PartsPartPriceNumber Description Each36-066 Collar, IC cylinders $6.00B202-328 Screws and backplate pack 5.20B220-001* Tailpiece & driver, full size IC 8.70B502-200 Backplate 3.50B502-209 Mounting screw 1.00B502-310-604 Driver, standard (non-IC) cylinder .84B502-899 Tailpiece, standard (non-IC) cylinder 2.00B520-153 Ring, cylinder, NL 5.90B520-361* Tailpiece retainer, full size IC (order in mult. of 100) 0.16B600-107 Throw member for SFIC models 1.90* Not compatible with housings manufactured before July 1997.For replacement of older parts, order housings less core (20-079).Notes: See Previous PageFor plugs, shells, pins, springs, etc.,see CYL-50, CYL-52, CYL-53, CYL-55.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-41

CYLINDERS • Interchangeable CoresFull Size23-03023-031For keying in thefield, order 10-pieceBulk Pack Cores.Cores are sub-assembledto save time!See CYL-5Full Size CoresPart PriceDescription Number EachConventional core 23-030 $55.00Conventional core less logo 23-031 55.00Primus ® core 20-740 98.00Primus ® XP core 20-740-XP 98.00Primus core less logo 20-741 98.00Primus XP core less logo 20-741-XP 98.00Hotel function conventional core for L9485 and L9486 30-120* 55.00Hotel function conventional core, less logo, for L9485 and L9486 30-121* 55.00* Specify hand for hotel function cores. Emergency keys must be ordered separately.Notes: 1) Control keys must be ordered separately.2) Finishes: 606 and 626.3) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).4) Full size cores, both conventional and Primus, can be integrated into any Schlage key system with compatible Everest orClassic keyways.5) Primus cores are Controlled Access. Specify LKB if 0-bitted Primus cores are required less key blanks.Deduct $10.40 per core.6) For construction cores, see Keys & Keying: Full Size Construction Core Program.7) Split key construction not available for interchangeable cores.8) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.9) Conventional cylinders are not available 0-bitted and if requested, will be converted to 1-bitted cylinders.For applications where 1-bitting is not desired, 09-411 or 09-753 Bulk Pack Interchangeable Cores are recommended.Full Size Core PartsPartPriceNumber Description EachC503-115 Cap pin spring (Order in multiples of 100) $0.14C503-118 Cap (Order in multiples of 25) 1.10C603-827 Cap pin (Order in multiples of 100) 0.14C603-956 Actuating ring 4.60C603-964 Actuating pin (control top pin) 0.42C603-967 Control bottom pin (Order in multiples of 100) 0.1423446339 AD Series CY, MS, MD, 993R, 993 S, 993M 3.20For plugs, shells, pins, springs, etc.,see CYL-50, CYL-52, CYL-53, CYL-55.CYL-42Price Book 72AEffective July 18, 2011 • Rev. 7/11

Small Format(Best ® Style)Interchangeable Cores • CYLINDERS80-037For quick deliveryon SFIC EverestUncombinated Cores,see Keys & Keying:QuicKey ProgramEverest ® Patented Keyway Small Format Interchangeable CoresPart PriceDescription Number EachEverest combinated core, includes master keying 80-037 $62.00Everest uncombinated core 80-036 40.00Notes: 1) Control keys must be ordered separately.2) Finishes: 606, 626 and 613 (simulated).3) Everest B Family keyways are restricted. See Terms & Conditions for more information.4) Key symbol must be specified for combinated cores.5) Uncombinated cores are furnished less keys, pins and springs.6) For construction cores, see Keys & Keying: Small Format Construction Core Program.80-033Best ® Keyway Small Format Interchangeable CoresPart PriceDescription Number Each7-Pin uncombinated, specify keyway 80-033 $28.006-Pin uncombinated, specify keyway 80-043 28.00Notes: 7) Finishes: 606 and 626.8) Uncombinated cores are furnished less keys, pins and springs. Factory keying is not available.9) Specify keyway using B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H,JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB, TDB=TD, QB=Q.AD-Series Tailpiece for Small Format CorePriceChassis Lever Design Description Tailpiece EachSFIC Driver 23446347 $8.30CY, MS, MD All SFIC Driver, Spacer(for 6 pins core) and 46929456 9.20Instruction sheetSFIC Driver N523-091 8.30Except ATH, 8AT SFIC Driver, Spacer(for 6 pins core) and 09-774 9.90993R, 993S, 993M Instruction sheetSFIC Driver 23446347 8.30ATH, 8AT SFIC Driver, Spacer(for 6 pins core) and 46929456 9.20Instruction sheetFor pins, springs, etc.,see CYL-51.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-43

CYLINDERS • Competitive RetrofitCorbin Russwin andSargent Reference TableCorbin Russwin ® Retrofit Cylinder Reference TableLock Cylinder Price Complete Keyway Plug ShellSide View Series Mechanism Each Cylinder Type (See CYL-55) (See CYL-57) Tailpiece)Conventional $50.00 24-022Classic 33-137 A508-653Everest 33-138 A508-653CL3300 Primus 92.00 20-762 Classic 33-136Primus XP 20-762-XP Everest 33-119N523-022A508-655Primus UL437 112.00 20-562 Classic 33-154Primus XP UL437 20-562-XP Everest 33-221Conventional 50.00 24-139Classic 33-137 A508-653Everest 33-138 A508-653CL3400 Primus 92.00 20-739 Classic 33-136CL3600 Primus XP 20-739-XP Everest 33-119A301-338A508-655Primus UL437 112.00 20-539 Classic 33-154Primus XP UL437 20-539-XP Everest 33-221Conventional 50.00 24-127Classic 33-060 A201-690CK4200 Everest 33-232 A100-052UT5200 Primus 92.00 20-727 Classic 33-081None(since Primus XP 20-727-XP Everest 33-222A201-6901963) Primus UL437112.00 20-527 Classic 33-080Primus XP UL437 20-527-XP Everest 33-223Sargent ® Retrofit Cylinder Reference TableLock Cylinder Price Complete Keyway Plug ShellSide View Series Mechanism Each Cylinder Type (See CYL-55) (See CYL-57) TailpieceConventional $50.00 24-119Classic 33-007 A508-653 C604-243Everest 33-231 A508-653 C604-2437L, 8L, 10 Primus ® 92.00 20-719 Classic 33-163Line Levers Primus XP 20-719-XP Everest 33-224A508-655 C604-243Primus UL437 112.00 20-519 Classic 33-162Primus XP UL437 20-519-XP Everest 33-225Conventional 49.00 24-120Classic 33-007 A100-045Everest 33-231 A100-0497, 8, 9 Line Primus 92.00 20-720 Classic 33-163 C303-437Knobs Primus XP 20-720-XP Everest 33-224AssemblyA508-637 with capPrimus UL437 112.00 20-520 Classic 33-162Primus XP UL437 20-520-XP Everest 33-225Conventional 50.00 24-126Classic 33-007 A100-046 C604-2436 Line Everest 33-231 A100-050 C604-243Except Primus 92.00 20-726 Classic 33-163B Knob Primus XP 20-726-XP Everest 33-224A100-048 C604-243Primus UL437 112.00 20-526 Classic 33-162Primus XP UL437 20-526-XP Everest 33-225Notes: 1) Finishes: 606 and 626 only.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.4) Hotel/Faculty Restroon function cylinders are not supported by Schlage.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) For rim cylinders with Sargent ® mounting screw locations, see Special Cylinders CYL-51.For pins, springs, etc.,see CYL-51.CYL-44Price Book 72AEffective July 18, 2011 • Rev. 7/11

Yale Reference Table,Tailpieces and ActuatorsCompetitive Retrofit • CYLINDERSYale ® Retrofit Cylinder Reference TableLock Cylinder Complete Price Keyway Plug ShellSide View Series Mechanism Cylinder Each Type (See CYL-55) (See CYL-57) TailpieceConventional 24-147 $50.00 Classic 33-007 A508-653Everest 33-231 A508-6535300LN Primus 20-747 92.00 Classic 33-1635400LN Primus XP 20-747-XP Everest 33-224A301-043Levers A508-655Primus UL437 20-547 112.00 Classic 33-162Primus XP UL437 20-547-XP Everest 33-225Conventional 24-123 50.00 Classic 33-007 A508-6535300, 5400, Everest 33-231 A508-6536200 Series Primus 20-723 92.00Knobs Classic 33-163 B520-409Primus XP 20-723-XP Everest 33-224A508-655Primus UL437 20-523112.00 Classic 33-162Primus XP UL437 20-523-XP Everest 33-225Notes: 1) Finishes: 606 and 626 only.2) Specify keyway to distinguish between Everest ® and Classic. Example: C or CP (Classic) vs. C123 (Everest).3) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.4) Hotel/Faculty Restroon function cylinders are not supported by Schlage.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) For rim cylinders with Sargent ® mounting screw locations, see Special Cylinders CYL-51.Tailpieces and ActuatorsPartPriceNumber Locksets EachA301-043 Yale Levers $3.30A301-338 Corbin RusswinCL3400/CL36001.10B520-409 Yale Knobs 20.70C303-437 Sargent 7, 8, 9(Assembly with cap)9.10C604-243 Sargent 6, 7L, 8L, 10 Line 1.10C604-243 Sargent 6, 7L, 8L, 10 Line 1.10MiscellaneousPartPriceNumber Description EachA501-783 Blocking disc, Yale levers $3.50B520-408 Sleeve, Yale cylinders 4.10B520-407 Washer, Sargent 4.30C607-062 Spacer, Corbin Russwin CL3300 2.40For pins, springs, etc.,see CYL-51.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-45

CYLINDERS • Competitor RetrofitCorbin RusswinMaster Ring Mortise20-009, 20-505, 20-705For old black cast iron case mortise locks only.Mortise Cylinders, Corbin Russwin Master RingComplete PriceCam Description Cylinder Mechanism Cylinder EachCorbin Russwin Master RingB502-946B520-728Everest ® & Primus ® For cyl. length 1 1/8",1 3/8", 1 5/8"Conventional 20-009 $154.00B502-486Classic ConventionalYYDim.X = .328Y = .893XXYB520-729For cyl. length 1 1/4",1 1/2", 1 3/4"YXDim. X = .34Y = .90XMaster Ring Primus Controlled Access 20-705 197.00(includes bushing)Primus XP Controlled Access 20-705-XP 197.00Primus UL437 20-505 225.00Primus XP UL437 20-505-XP 225.00Dim.X = .328Y = .893Dim. X = .34Y = .90Notes: 1) Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" Primus add $31.70.For 1 1/2", 1 5/8" and 1 3/4" Conventional add $8.90.2) Finishes: 605, 606, 609, 612, 613, 625 and 626.3) To order less Schlage logo specify cylinder “with K510-612 faceplate”.4) Specify LKB if 0-bitted Primus cylinders are required less key blanks. Deduct $10.40 per cylinder.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.Bushing, Corbin Russwin Master RingPartPriceNumber Description EachB202-339 Reducing bushing and screws $60.80Cams, Corbin Russwin Master RingPartPriceNumber Description EachB502-486 Classic Conventional - Non Modular Cylinders $21.10B502-946 Everest & Primus ® - Non Modular Cylinders 24.70⧖ XB11-825* Interchangeable core - Non Modular Cylinders 21.80B520-728 Modular Cylinders (all keyways) length 1-1/8”, 1-3/8”, 1-5/8” 24.60B520-729 Modular Cylinders (all keyways) length 1-1/8”, 1-1/2”, 1-3/4” 24.60⧖ Extended Factory Lead Time* Not subject to standard discount terms.Trim Collars Corbin Russwin Master RingPart Specify PriceNumber Finish Description Each38-033 • Trim collar $7.20For plugs, shells, pins, springs, etc.,see CYL-50, CYL-52, CYL-53, CYL-55.CYL-46Price Book 72AEffective July 18, 2011 • Rev. 7/11

Cams for SchlageCompetitor Retrofit • CYLINDERSCams for Schlage Mortise Cylinders to Operate Other Manufacturers’ LocksModular Modular Classic Conventional Interchangeable Everest ® & Primus ®Cylinder Cylinder Non-IC Core Non-IC20-061, 20-771, 20-001Cyl. length Cyl. length 20-001 26-094, 80-102, Everest Conventional1 1/8", 1 3/8", 1 5/8" 1 1/4", 1 1/2", 1 3/4" 80-110, 80-132, 20-500 and80-302 20-700 PrimusCorbin Russwin ®DL4000 Series(Old Corbin 420andRusswin 1503)B520-730 B520-731YXYXB520-295(was XB11-458)YXB520-254(was XB11-426)B520-366(was XB11-656)Dim. X = .153Y = .761Dim. X = .153Y = .761Dim.X = .155Y = .775Corbin Russwin ®ML2200 Series(Old Corbin 7000-9000andRusswin 4000-5000)All functions exceptML2255 andML2242 inside(see straight cam)B520-732 B520-733YgXDim. X = .236Y = .731YXDim. X = .236Y = .731B520-233(was XB08-899)YXDim.X = .232Y = .729B520-253(was XB11-352)B520-309(was XB11-629)Corbin Russwin A65ML2200 master ringdeadbolt functionsmanufactured before6/10/93andold Russwin cast ironresidential locks.For all Best 40H Series& 30H Deadbolt functionYB520-734 B520-735XDim. X = .242Y = .757YXDim. X = .242Y = .757B520-223(was XB03-142)YXDim.X = .235Y = .729B520-360(was XB11-817)B520-367(was XB11-887)Yale ®2160Arrow ®#004Sargent ®13-0660All functionsexcept 16 insideand 50 outsideBest30Latch FunctionB520-736 B520-737YXDim. X = .187Y = .727L583-476 L583-477Yg , ,XDim. X = .187Y = .727B520-256(was XB11-430,replaces XB10-659)YXDim.X = .186Y = .718B502-191ClassicConventionalB520-296(was XB11-461,replaces XB11-484)K510-730B520-329(was XB11-631,replaces XB11-630)B502-948Everest& PrimusYXYXYXYXYXDim. X = .35Y = .72Dim. X = .35Y = .72Dim.X = .338Y = .71Dim.X = .338Y = .71Dim.X = .338Y = .71With SoldCam Cylinder SeparatelyB520-191 N/C $2.30B520-223 $8.40B520-233 8.40B520-253 N/CB520-254 N/CB520-256 8.10 8.10B520-295 8.10B520-296 N/CWith SoldCam Cylinder SeparatelyB520-309 N/CB520-329 N/CB520-360 N/C $8.10B520-366 N/CB520-367 N/CB502-948 N/C 2.30K510-730 N/C 2.30XB12-046 N/C 8.10With SoldCamCyl. SeparatelyB520-730 1-1/8”, 1-3/8”, 1-5/8” N/CB520-731 1-1/4”, 1-1/2”, 1-3/4” N/CB520-732 1-1/8”, 1-3/8”, 1-5/8” N/CB520-733 1-1/4”, 1-1/2”, 1-3/4” N/C $8.10B520-734 1-1/8”, 1-3/8”, 1-5/8” N/CB520-735 1-1/4”, 1-1/2”, 1-3/4” N/CB520-736 1-1/8”, 1-3/8”, 1-5/8” N/CB520-737 1-1/4”, 1-1/2”, 1-3/4” N/CPrice Book 72AEffective July 18, 2011 • Rev. 7/11CYL-47

CYLINDERS • Mail Box20-03320-067 20-066 20-06920-030 20-001Letter/Mail Box Cylinders and Application TableKeyway Cam Plug Shell Complete CompleteDescription Type (See Below) (See CYL-55) (See CYL-57) Cylinder Cyl. PriceAmerican DeviceClassic C604-268 33-616 C203-72620-066Everest ® C604-268 33-234 A100-051$73.00Auth, 466, 470, 480 seriesClassic C604-269 33-616 C203-72620-067Everest C604-269 33-234 A100-051Bommer vertical mail boxClassic L583-476 33-137 N/A 20-001-118 63.00Everest L583-476 33-138 N/ABommer & Florence, Cutler Mail Classic C604-269 33-616 C203-726Chute, Federal Equipment Everest C604-269 33-234 A100-051Corbin Wood ProductsClassic C604-271 33-616 C203-726Everest C604-271 33-234 A100-051Dura SteelClassic C604-088 33-806 A201-849Everest C604-419 33-233 A201-69820-06920-033 73.0020-030Notes: 1) Finishes: 606 and 626. 20-001 also available 605, 611, 612, 613 and 625.2) Federal law prohibits the master keying of a letter box cylinder.3) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.4) Not available in Primus ® .Miscellaneous PartsPartPriceNumber Description EachB502-468 Screw, 2 required, 20-030 $0.14Classic (order multiples of 100)B502-942 Screw, 20-030 Everest 0.30(order multiples of 100)C503-346 Spacer, 20-033, 20-066, 0.8420-067, 20-069C604-050 Mounting bracket, 20-033 9.00C604-051 Screw post, 2 req’d, 20-033 1.20C604-052 Screw, 2 req’d, 20-033 1.60C604-053 Lock washer, 2 req’d, 20-033 1.60Miscellaneous PartsPartPriceNumber Description EachC604-088 Cam, 20-030 Classic $23.70C604-089 Bracket, 20-030 17.70C604-226 Screw, 2 req’d, 20-033, 20-066, 0.1420-067, 20-069 (order mult. of 100)C604-234 Washer, 2 req’d, 20-033, 20-066, 0.1420-067, 20-069 (order mult. of 100)C604-268 Cam, 20-066 15.80C604-269 Cam, 20-067, 20-069 15.80C604-271 Cam, 20-033 19.30C604-419 Cam, 20-030 Everest 23.80For pins, springs, etc.,see CYL-51.CYL-48Price Book 72AEffective July 18, 2011 • Rev. 7/11

Cylinders,Non-Standard FinishesSpecial • CYLINDERSSpecial Cylinders⧖ Extended Factory Lead TimeNot subject to standard discount terms“X”PriceNumber Description EachExtra Long Mortise CylindersXB03-418 Mortise cylinder (20-001, 30-001 or 30-004), 1 7/8" – 5" long Classic or Everest $304.00Full size IC mortise cylinder (26-091 or 30-008), 2 1/4" – 5" long, Classic or Everest 415.00XB11-475* Primus ® full size IC mortise cylinder (20-763 or 20-798), 2 1/4" – 5" long 462.00Full size IC mortise cylinder housing less core (20-059 or 30-007) 2 1/4" – 5" long 364.00XB11-638 Primus mortise cylinder (20-700, 20-787 or 20-789), 1 7/8" – 5" long 353.00Mortise Cylinder with SwitchXB09-195Mortise cylinder (20-001) with “on” and “off” switch for key controlled electrical circuits,conventional$322.00XB09-795 Same as XB09-195, but double position, classic conventional only (no master keying available) 432.00XQ11-804Primus mortise cylinder (20-700) with “on” and “off” switch for key controlled electricalcircuits 364.00Rim CylindersXB04-618Conventional cylinder (20-021 or 20-022) for doors over 3" thick $381.00Insure device/ trim thickness is included in addition to door thicknessPrimus cylinder (20-710) for doors over 3" thick 353.00Insure device/ trim thickness is included in addition to door thicknessXB11-789 Conventional cylinder (20-022) with mounting holes for Sargent ® exit device 73.00XB11-790 Primus cylinder (20-710) with mounting holes for Sargent ® exit device 124.00Full size IC, conventional core (20-057) for doors over 3" thick 398.00Insure device/ trim thickness is included in addition to door thicknessXB11-958 Full size IC, Primus core (20-757) for doors over 3" thick 446.00Insure device/ trim thickness is included in addition to door thicknessFull size IC, housing less core (20-079) for doors over 3" thick 348.00Insure device/ trim thickness is included in addition to door thickness* Available in 1/4" increments. Order collars or blocking rings separately to fill any gaps.Notes: 1) Specify complete cylinder as required, then “X” number. Example: 20-001 per XB09-195.2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.3) Primus cylinders are Controlled Access. Specify LKB if 0-bitted Primus cylinders are required less key blanks.Deduct $10.40 per cylinder.4) If you are unable to find your required hardware solution in this price book, please refer to our RFQ Form on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-49

CYLINDERS • PartsPins & SpringsFull Size CylindersOriginal Manufacturer Nickel SilverPins-Full Size cylindersPart Description PriceNumber Type Size Each34-101 #134-102 Top pins #234-103 #334-202 #234-203 #334-204 #434-205 Master pins #534-206 #634-207 #7 Order in34-208 #8 multiples of 10034-209 #9 $0.0834-300 #034-301 #134-302 #234-303 #334-304 Bottom pins #434-305 #534-306 #634-307 #734-308 #834-309 #9Order in34-007 Everest ® check pin — multiples of 501.10Note:1) For Titan/Kwikset and Weiser reorder componentssee page Cyl-56.Construction Balls, RCKPrimus ® Finger Pins and SidebarsPartPriceNumber Description Each34-001 Finger pin #134-002 Finger pin #2 Order in34-003 Finger pin #3 multiples of 10034-004 Finger pin #4 $0.7834-005 Finger pin #534-006 Finger pin #634-058 Finger pin #7C603-950 Sidebar 2.90Cap and Cap PinPartPriceNumber Description EachOrder inC503-116* Cap pin (non-IC) multiples of 100$0.12Order inC503-118* Cap multiples of 251.10Order inC603-827 Full Size IC Cap Pin multiples of 1000.14* See CYL-13 for KC-Series cap and cap pinPartPriceNumber Description Each34-401 Pack of 1,000 ball bearings $30.50SpringsPartPriceNumber Description EachC503-113 Pin tumbler spring (including Primus)C503-115 Cap retainer pin spring (including Primus)Order inmultiples of 100C603-951 Primus finger pin spring and Everest check pin spring$0.12C603-952 Primus sidebar springWard RingsPartPriceNumber Description EachC503-833 Ward ring $0.82K510-045 Stop ring for hotel function Everest mortise cylinders 2.70K510-434 Stop ring for hotel function Classic mortise cylinders 2.70OrderingShaded prices arespecified in unitquantities (perpiece) and must beordered in multiples.Example:Order 100 34-300,Receive 1 bag of 100pins. Price = $8.00CYL-50Price Book 72AEffective July 18, 2011 • Rev. 7/11

Pins & SpringsSmall Format Interchangeable CoresOriginal Manufacturer Nickel Silver SFIC PinsPart Description PriceNumber Type Size Each34-902 #2B34-903 #3B34-904 #4B34-905 #5B34-906 #6B34-907 #7B34-908 #8B34-909 Master/ #9B34-910 build-up/ #10B34-911 top pins #11B34-912 #12B34-913 #13B34-914 #14B Order in34-915 #15B multiples of 10034-916 #16B $0.1034-917 #17B34-918 #18B34-919 #19B34-800 #0A34-801 #1A34-802 #2A34-803 #3A34-804 #4A34-805 Bottom pins #5A34-806 #6A34-807 #7A34-808 #8A34-809 #9A34-950 Everest ® check pin – 1.10Parts • CYLINDERSOrderingShaded prices arespecified in unitquantities (perpiece) and must beordered in multiples.Example:Order 100 34-800,Receive 1 bag of 100pins. Price = $10SFIC CapsPartPriceNumber Description EachOrder in34-952 21C Cap multiples of 500$0.08SFIC SpringsPartPriceNumber Description EachOrder inC504-114 20S Tumbler spring multiples of 500$0.08Order inC504-116 Everest check pin spring multiples of 1000.12SFIC Plug RetainerPartPriceNumber Description EachOrder inC603-936 Plug retainer multiples of 20$1.10Note:1) SFIC plug retainer is compatible with SFIC Everestproducts manufactured after October 18, 2002.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-51

CYLINDERS • PartsPlugs for Modular Housing.CamL583-474 or L583-475Cam Screw, 1”B520-692Plug ExtensionB590-299Cam Screw, ³⁄₄”B520-6911³⁄₄"1⁵⁄₈"CamL583-474 or L583-475Plug ExtensionB590-298Cam Screw, ¹⁄₂”B520-6901¹⁄₂"1³⁄₈"CamL583-474 orL583-4751¹⁄₄"1¹⁄₈" housingModular Housing InterchangeabilityHousing Cam Cam Screw Plug ExtensionPart Number Size Part NumberB520-721 1-1/8” L583-474 B520-690 –B520-722 1-1/4” L583-475 B520-690 –B520-723 1-3/8” L583-474 B520-691 B590-298B520-724 1-1/2” L583-475 B520-691 B590-298B520-725 1-5/8” L583-474 B520-692 B590-299B520-726 1-3/4” L583-475 B520-692 B590-299CYL-52Price Book 72AEffective July 18, 2011 • Rev. 7/11

Plugs for Key-in-Knob/Lever, etc.Parts • CYLINDERSPlugs, Key-in-Knob/Lever, Deadlock and Mail BoxPartPriceNumber Description Each33-005* 5-Pin (except F51 and F80), C, CE, E and F keyways only33-137 6-Pin Classic conventional $27.5033-007 Sargent & Yale, Classic conventional33-059* 5-Pin, F, FA-Series Knobs, BEL, GEO, PLY, AND, DNB (C keyway only)33-059-149* 5-Pin, F-Series Knobs, ORB, C keyway only19.9033-060 Corbin Russwin CK4200, UT5200 Classic conventional 27.6033-065* 5-Pin, F, FA-Series Levers, ACC, AVA, FLA, CLT, CHP, STA (C keyway only) 19.2033-080 Corbin Russwin CK4200, UT5200 Classic Primus ® UL437 / Classic Primus XP UL437 68.9033-081 Corbin Russwin CK4200, UT5200 Classic Primus / Classic Primus XP 49.0033-119 Everest ® Primus ® / Everest Primus XP 49.4033-154 Classic Primus UL437 / Classic Primus XP UL437 68.9033-136 Classic Primus / Class Primus XP 49.4033-162 Sargent & Yale, Classic Primus UL437 / Classic Primus XP UL437 68.9033-163 Sargent & Yale, Classic Primus / Classic Primus XP 49.4033-216 6-pin Classic, hotel function 38.9033-221 Everest Primus UL437 / Everest Primus XP UL437 68.9033-222 Corbin Russwin CK4200, UT5200, Everest Primus / Everest Primus XP 49.4033-223 Corbin Russwin CK4200, UT5200, Everest Primus UL437 / Everest Primus XP UL437 68.9033-224 Sargent & Yale, Everest Primus / Everest Primus XP 49.4033-225 Sargent & Yale, Everest Primus UL437 / Everest Primus XP UL437 68.9033-138 Everest conventional33-231 Sargent & Yale, Everest conventional33-232 Corbin Russwin CK4200, UT5200, Everest conventional 29.1033-233 Mail box 20-030 Everest conventional33-234 Mail box 20-033, 20-066, 20-067, 20-069 Everest conventional33-235 Everest hotel function 38.9033-616 Mail box 20-033, 20-066, 20-067, 20-069 Classic conventional33-806 Mail box 20-030 Classic conventional29.10* These plugs are pre-drilled for lost ball construction keying (33-005 is pre-drilled in C keyway only).Notes: 1) Specify finish: 606 (430 for F-Series Knobs & Levers) and 626 (429 for F-Series Knobs & Levers).2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.3) For Titan/Kwikset and Weiser reorder components see page Cyl-56.Modular Cylinders Plugs-Key In lever/ KnobPartPriceNumber Description Each33-137 6 Pins, Plug, Classic, $27.5033-13833-1366 Pins, Plug, Everest,6 Pins, Plug, Classic Primus / Primus XP29.1049.4033-119 6 Pins, Plug, Everest Primus / Primus XP 49.40Plugs, Full Size Interchangeable CorePartPriceNumber Description Each33-058* Classic conventional33-133 Everest conventional hotel function$28.9033-139 Everest Primus / Everest Primus XP33-160 Classic Primus / Classic Primus XP49.8033-236 Everest conventional 39.30* For L-Series Classic hotel cylinders, specify “warded.”Notes: 4) Specify 606 or 626 finish.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.6) IC cap pins and cap pin springs must be ordered separately.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-53

CYLINDERS • PartsShells/ bodiesKey in Lever/ knob -Modular Cylinders TypePartNumber DescriptionPriceEachA508-653 6 Pin, Body & Cover, Classic/Everest $19.90A508-655 6 Pin, Body & Cover, Primus / Primus XP 40.70Back Housings-Modular CylinderPartPriceNumber Description EachB520-721 Back Housing, Mortise 1-1/8" $6.00B520-722 Back Housing, Mortise 1-1/4" 6.00B520-723 Back Housing, Mortise 1-3/8" 6.00B520-724 Back Housing, Mortise 1-1/2" 24.00B520-725 Back Housing, Mortise 1-5/8" 24.00B520-726 Back Housing, Mortise 1-3/4" 24.00B520-727 Back Housing, Rim 6.00K110-480 316 Front housing 643e finish 6.00K110-480 605 Front housing 605 finish 6.00K110-480 606 Front housing 606 finish 6.00K110-480 609 Front housing 609 finish 6.00K110-480 612 Front housing 612 finish 6.00K110-480 613 Front housing 613 finish 8.00K110-480 619 Front housing 619 finish 6.00K110-480 625 Front housing 625 finish 6.00K110-480 626 Front housing 626 finish 4.00K110-480 629 Front housing 629 finish 6.00K110-480 630 Front housing 630 finish 6.00B520-690 Screw, Cam , 5-40 X 1/2" (for modular cylinders length 1 1/8" & 1 1/4") 0.12B520-691 Screw, Cam , 5-40 X 3/4" (for modular cylinders length 1 3/8" & 1 1/2") 0.28B520-692 Screw, Cam , 5-40 X 1"(for modular cylinders length 1 5/8" & 1 3/4") 0.38B520-693 Modular cylinder housings screws, 8-32 X 7/8" 1.00B590-298 Plug extension 1-3/8”, 1-1/2” 1.70B590-299 Plug extension 1-5/8”, 1-3/4” 1.70CYL-54Price Book 72AEffective July 18, 2011 • Rev. 7/11

ShellsParts • CYLINDERSShells, Key-in-Knob/Lever, Deadlock and Mail BoxPartPriceNumber Description EachA100-049 Sargent 8 Line Everest conventionalA100-050 Sargent 6 Line Everest conventionalA100-051 Mail box 20-033, 20-066, 20-067, 20-069 Everest conventional$23.80C203-726 Corbin Russwin CK4200, UT5200 Everest conventionalA508-655 Primus / Primus XP 42.30A201-690 Corbin Russwin CK4200, UT5200 Primus / Primus XP 41.40A201-691 Corbin Russwin CK4200, UT5200 Classic conventionalA508-653 Everest and mail box 20-030 Everest conventionalA201-848 5-Pin Classic (except F-Series Knobs & Levers) 20.70A508-653 6-Pin Classic and mail box 20-030 Classic conventionalA100-045 Sargent 8 Line Classic conventionalA100-046 Sargent vertical Classic conventionalA100-047 Sargent 8 Line Primus ® / Primus XPA100-048 Sargent vertical Primus / Primus XP42.30C203-726 Mail box 20-033, 20-066, 20-067, 20-069 Classic conventional 23.80Shells, Interchangeable CorePart Specify PriceNumber Finish Description EachB220-006 • Everest conventional$23.80B220-117 • Everest hotel function, Schlage logoB220-280 • Primus / Primus XP 48.70B220-282 • 6-Pin Classic conventional (except hotel function)23.80B220-284 • Classic hotel function, Schlage logoNote:1) Finishes: 606 and 626 only.Modular cylinders Mortise and Rim cylinders components & Service KitsPartPriceNumber Description Each09-992 Service kit- Back Housing for 1 1/8" lengthBack Housing B520-721 Mortise 1 1/8"", 2 Housing screws B520-693, cam screw B520-690 $6.10Order front housing and cam separately09-993 Service kit-Back Housing for 1 1/4" lengthB520-722 Mortise 1 1/4"", 2 Housing screws B520-693, cam screw B520-690 7.10Order front housing and cam separately09-994 Service kit -back housing for 1 3/8" lengthB520-723 Back Housing Mortise 1 3/8", plug extension B590-298, cam screw B520-691, 11.102 housing screws B520-693. Order front housing and cam separately09-995 Service kit- back housing for 1 1/2" length Back Housing,B520-724 Mortise 1 1/2", 2 Housing screws B520-693 , plug extension B590-298, 29.00cam screw B520-691. Order front housing and cam separately09-996 Service kit- back housing for 1 5/8" lengthBack Housing, B520-725 Mortise 1 5/8"", 2 Housing screws B520-693, plug extension 29.00B590-299, cam screw B520-692. Order front housing and cam separately09-997 Service kit-back housing for 1 3/4" lengthBack Housing, B520-726 Mortise 1 3/4"", 2 Housing screws B520-693 , 29.00plug extension B590-299, cam screw B520-692. Order front housing and cam separately09-998 Service kit-back housing Rim CylBack Housing Rim B520-727, housing screws B520-693, Tail piece B502-899, 14.40Driver B502-310, back plate & screws B202-328. Order front housing and cam separatelyNote: 2) Finishes: 605, 606, 609, 612, 613, 625 and 626.Price Book 72AEffective July 18, 2011 • Rev. 7/11CYL-55

CYLINDERS • Competitive Keying Kit RefillsCompetitive Keying Kit RefillsKeying Kit Description Part Number Price EachPinsPlugsTitan/KwiksetCompetitive KeyingConversion Kit40-090WeiserCompetitive KeyingConversion Kit40-094Titan/KwiksetCompetitive KeyingConversion Kit40-090WeiserCompetitive KeyingConversion Kit40-094* Specify finish: 556 (for 505) or 626.** Specify finish: 306 (for 505) or 381 (for 626).#1 Bottom pin (.1715”) 34-067#2 Bottom pin (.1955”) 34-068#3 Bottom pin (.2195”) 34-069#4 Bottom pin (.2405”) 34-070#5 Bottom pin (.2645”) 34-071#6 Bottom pin (.2885”) 34-072#7 Bottom pin (.3065”) 34-073#0 Bottom pin (.186”) 34-034#1 Bottom pin (.204”) 34-035#2 Bottom pin (.222”) 34-036#3 Bottom pin (.240”) 34-037#4 Bottom pin (.258”) 34-074#5 Bottom pin (.276”) 34-075#6 Bottom pin (.294”) 34-076#7 Bottom pin (.312”) 34-077#8 Bottom pin (.330”) 34-078#9 Bottom pin (.348”) 34-079Plug for Residential B, BA-Series Deadlocks 33-005-R1*Plug for F300, FA300-Series Deadlocks33-137-R1*Plug for F, FA-Series Knob designs (except ORB) 33-059-R1**Plug for F-Series ORB design33-059-R1-149**Plug for F, FA-Series Lever designs33-065-R1**Plug for F, FA-Series Knob designs (except ORB) 33-085**Plug for F-Series ORB design 33-086**Plug for F, FA-Series Lever designs 33-087**Plug for Residential B, BA-Series Deadlocks 33-088*Plug for F300, FA300-Series Deadlocks 33-089*Order inmultiples of 100$0.18$6.70Note:1) See Tools & Kits: Competitive Keying Kits for complete kits.OrderingShaded prices are specifiedin unit quantities(per piece) and must beordered in multiples.Example:Order 100 34-067,Receive 1 bag of 100 pins.Price = $18.00CYL-56Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionKEYS & KEYINGTable of ContentsKeys Ordered SeparatelyKeys-2Classic Conventional Key Blanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-2Classic Conventional Cut Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-3Everest ® Full Size Conventional Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . Keys-4Everest ® Small Format IC Key Blanks and Cut Keys . . . . . . . . . . . . . . . . . . . . . . . . Keys-5Key Blanks, Best ® Key Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-5Classic Primus ® Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . . . . Keys-6Classic Primus ® XP Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . Keys-7Everest ® Primus ® Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . . . . .Keys-8Everest ® Primus ® XP Key Blanks, Cut Keys and I.D. Cards . . . . . . . . . . . . . . . . . . .Keys-9Split Key Construction Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-10Special Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-10Presentation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-11Key StampingKeys-12Cylinder StampingKeys-13Construction Core ProgramKeys-14Full Size Construction Core Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-14Small Format Construction Core Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-15Keying ChargesKeys-16Contract Master Keying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-16Contract Construction Keying (CK)/Split Key Construction Keying . . . . . . . . . . . Keys-16Other Keying (Non-Master Keyed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-16Residential Master Keying (RMK) and/or Residential Construction Keying (RCK) . . Keys-17Bitting Lists (Transcripts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-18KSC Generic Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-18Keys Ordered with Locks or Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-19Pack Change Keys Independently (PKI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-19QuicKey ProgramKeys-21QuicKey Product Availability and Order Requirements- Full Size Key Blanks . . . Keys-21QuicKey Product Availability and Order Requirements-SFIC Keys and Cores . . . Keys-22SITEMASTER 200 ®Keys-23Key System Management Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keys-23How To OrderForms & ExamplesQuick Key order form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-25Letter of Authorization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-27Primus order check list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-28Master keyed order form and example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-29-31Master key system system summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-33Primus face sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-41Primus Signature Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Keys-43For detailed information on cylinder and keyway terms seeCylinders: Schlage Cylinder and Keyway Terminology.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-1

KEYS & KEYING • Keys Ordered SeparatelyClassic Conventional Key Blanks35-100 (5-Pin Standard)35-101 (6-Pin)35-130 (5-Pin)35-131 (6-Pin)35-102 35-056CONTROL35-140 (5-Pin)35-141 (6-Pin)35-143 (5-Pin)35-144 (6-Pin)Classic Conventional Key BlanksPrice EachPart Standard RestrictedNumber Description Sections SectionsStandard Bow35-100Order inStandard bow, embossed both sides5-Pin multiples of 5035-130 Standard bow, unembossed both sides $1.20 $3.2035-101Order inStandard bow, embossed both sides6-Pin multiples of 5035-131 Standard bow, unembossed both sides 1.80 4.4035-102 Emergency Standard bow, embossed both sides, notched for all ward positions 3.9035-056Standard bow, embossed both sidesControl35-076 Standard bow, unembossed both sides3.7035-077 Hotel Function, embossed both sides35-079 Hotel Function, unembossed both sidesLarge Bow35-140 5-Pin35-141 6-PinLarge bow, embossed both sides $5.40Access Bow35-143* 5-Pin35-144** 6-PinAccess bow, embossed both sides $5.40* Available with C, CE, E, and F key sections only.** Available with all sections except L and Y.Notes: 1) Specify key section. C, CE, E, EF, F, FG, G, H, J, K, and L are standard. Quad, Reverse, and Numbered(“Paracentric”) are restricted and require a letter of authorization from the end-user. See Terms & Conditions.2) Schlage recommends ordering L and Y section keys cut at the factory. L and Y sections are available only instainless steel, which will damage the cutters of most key machines in the field.3) Large bow custom logo keys are available as key blanks only. Cut keys are not available.Keys-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Classic Conventional Cut Keys,Classic Conventional Master KeysKeys Ordered Separately • KEYS & KEYING48-100 (5-Pin)48-101 (6-Pin)49-100 (5-Pin)49-101 (6-Pin)48-05649-05686776CCombinationSectionR492518AACRegistry #Master Key SymbolSectionCONTROLStandard markings unless otherwise specified. See page Keys-10 for additional key stamping information.Classic Conventional Cut KeysPrice EachStandard RestrictedPart Number Description Sections SectionsStandard Bow48-100 5-PinStandard bow, embossed both sides48-101 6-Pin$5.70 $10.0048-130 5-PinStandard bow, unembossed both sides48-131 6-Pin –48-102 Emergency Standard bow, embossed both sides, notched for all ward positions 10.00 10.0048-056Standard bow, embossed both sidesControl48-076 Standard bow, unembossed both sides10.00 10.00Large Bow48-140 5-Pin48-141 6-PinLarge bow, embossed both sides 8.30 –Access Bow48-143* 5-Pin48-144** 6-PinAccess bow, embossed both sides 8.30 –* Available with C, CE, E, and F key sections only.** Available with all sections except L and Y.Note: 1) For keys ordered with locks or cylinders see page Keys-16.Classic Conventional Master KeysPart Number Description Price EachStandard Bow49-100 5-Pin49-101 6-PinStandard bow, embossed both sides49-130 5-PinStandard bow, unembossed both sides49-131 6-Pin 10.0049-102 Emergency Standard bow, embossed both sides, notched for all ward positions49-056Standard bow, embossed both sidesControl49-076 Standard bow, unembossed both sidesLarge Bow49-140 5-Pin49-141 6-PinLarge bow, embossed both sides 13.50Access Bow49-143* 5-Pin49-144** 6-PinAccess bow, embossed both sides 13.50* Available with C, CE, E, and F key sections only.** Available with all sections except L and Y.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-3

KEYS & KEYING • Keys Ordered SeparatelyFull Size Everest ConventionalKey Blanks, Cut Keys, Master Keys35-009Standard forEverest C Family35-002Standard forEverest D Family35-015Unembossed35-003ControlBack ofAll Blanks(except 35-015)Facility Code(Everest D Family Only)Pat. 5,715,717DO NOT DUPLICATEPat. 5,715,717DO NOT DUPLICATEPat. 5,715,717DO NOT DUPLICATEPat. 5,715,717Section001426Full Size Everest ® Conventional Key BlanksPart C Family D FamilyDescription Number Open Sections Restricted SectionsStandard embossed key 35-009 Order in multiples of 50—DO NOT DUPLICATE embossed key 35-002 $2.10$4.40DO NOT DUPLICATE unembossed key 35-015Control key, DND embossed 35-0033.60 4.40Control key, DND, hotel function 35-016Emergency key blank, DND 35-007 3.80 4.40Note: 1) See page Keys-12 for key stamping options.35-009Standard forEverest C Family35-002Standard forEverest D Family35-015Unembossed35-003ControlBack ofAll Blanks(except 35-015)Facility Code(Everest D Family Only)Pat. 5,715,717DO NOT DUPLICATEPat. 5,715,717DO NOT DUPLICATEPat. 5,715,717DO NOT DUPLICATEPat. 5,715,717Section001426Full Size Everest ® Conventional Cut KeysPart C Family D FamilyDescription Number Open Sections Restricted SectionsStandard key 48-009 —DO NOT DUPLICATE key 48-002$5.70DO NOT DUPLICATE key, unembossed 48-015 $10.00Set-up key 48-013Master key 49-009 —Master key, DO NOT DUPLICATE 49-002Master key, DO NOT DUPLICATE, unembossed 49-015Control key DND std., non-factory system 48-003Control key DND std., factory system 49-003 10.00Control key DND, hotel function, non-factory 48-016 10.00Control key DND, hotel function, factory sys. 49-016Emergency key DND, non-factory system 48-007Emergency key DND, factory system 49-007Notes: 2) See page Keys-12 for key stamping options.3) For keys ordered with locks or cylinders see page Keys-20.Keys-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

SFIC Everest ® Restricted& Best ® Key SectionsKeys Ordered Separately • KEYS & KEYING35-401Key Blanks48-401Operating Keys49-356Control Keys49-401Master KeysRegistry No.AAR492518001426Key SymbolSectionFacility CodeStandard markings unless otherwise specified. See Keys-12 for additional key stamping information.Small Format Interchangeable CoreKeys, Everest ® Restricted Key SectionsPartPriceNumber Description EachKey Blanks35-401Embossed key blank(control and operating)Order inmultiples35-021Unembossed key blank of 50(control and operating) $4.20Cut Keys48-401 Embossed operating key 9.3048-021 Unembossed operating key49-401 Embossed master key49-021 Unembossed master key49-356 Embossed control key9.7049-022 Unembossed control keyNotes: 1) All Everest ® SFIC keyways are restricted. See Terms and Conditions for more information.2) For keys ordered with locks or cylinders see page Keys-20.35-310Key BlanksDUPLICATIONPROHIBITEDJKey Blanks, Best ® Key SectionsPartPriceNumber Description EachOrder in35-310 Key blank, 6 or 7-pin multiplesof 50$1.90Notes: 3) Specify keyway using B suffix: AB = A, BB=B, CB=C,DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H,JB = J, KB = K, LB = L, NB=N, MB = M, RB=R,TBB=TB, TBD=TD, QB=Q.4) Key stamping not available on 35-310 key blanks.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-5

KEYS & KEYING • Keys Ordered SeparatelyClassic Primus Keys,Classic Primus I.D. CardsKey BlanksCut Keys35-157Front35-053FrontBackof Both48-157, 49-157Front48-053, 49-053FrontBackof BothPRIMUSDO NOT DUPLICATEPRIMUSDO NOT DUPLICATEStandard markings unless otherwise specified. See page Keys-12 for additional key stamping information.Classic Primus ® Key Blanks and Cut KeysPart Number Description Price EachKey BlanksOrder in35-157 Standard bow, embossed both sides multiples of 5035-053 Standard bow, unembossed one side, “PRIMUS” logo on one side $5.1035-116 Large bow, embossed both sides35-115 Access bow, embossed both sides8.6035-158 Control key, standard bow, embossed both sides35-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side8.2035-159 Lockout key, standard bow, embossed both sides 8.20Cut Keys48-157 Standard bow, embossed both sides48-053 Standard bow, unembossed one side, “PRIMUS” logo on one side12.8048-171 Standard bow, stainless steel LP section key 49.4048-116 Large bow, embossed both sides48-115 Access bow, embossed both sides16.4048-158 Control key, standard bow, embossed both sides48-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side12.8048-172 Control key, stainless steel LP section control key 56.7048-159 Lockout key, standard bow, embossed both sides 12.80Master Keys49-157 Standard bow, embossed both sides49-053 Standard bow, unembossed one side, “PRIMUS” logo on one side12.8049-171 Standard bow, stainless steel LP section key 49.4049-116 Large bow, embossed both sides49-115 Access bow, embossed both sides16.4049-158 Control key, standard bow, embossed both sides49-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side12.8049-172 Control key, stainless steel LP section control key 56.70Notes: 1) When ordering Level 1 Plus key blanks, Locksmith I.D. number must be furnished.2) For keys ordered with locks or cylinders see page Keys-20.3) LP Section keys are only available in stainless steel. Schlage recommends having LP section keys cut at the factorysince stainless steel will damage the cutters of most field key machines.Classic Primus ® I.D. CardsPart Number Level Price Each40-061 1 Order in40-065 1 Plus multiples of 5040-062 2 $2.20Keys-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Classic Primus XP Keys,Classic Primus XP I.D. CardsKeys Ordered Separately • KEYS & KEYINGKey BlanksCut Keys35-157-XPFront35-053-XPFrontBackof Both48-157-XP, 49-157-XPFront48-053-XP, 49-053-XPFrontBackof BothPRIMUSDO NOT DUPLICATEPAT. NO. 7,159,424PRIMUSDO NOT DUPLICATEPAT. NO. 7,159,424Standard markings unless otherwise specified. See page Keys-12 for additional key stamping information.Classic Primus ® XP Key Blanks and Cut KeysPart Number Description Price EachKey BlanksOrder in35-157-XP Standard bow, embossed both sides multiples of 5035-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side $5.1035-116-XP Large bow, embossed both sides35-115-XP Access bow, embossed both sides8.6035-158-XP Control key, standard bow, embossed both sides35-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side8.2035-159-XP Lockout key, standard bow, embossed both sides 8.20Cut Keys48-157-XP Standard bow, embossed both sides48-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side12.8048-171-XP Standard bow, stainless steel LP section key 49.4048-116-XP Large bow, embossed both sides48-115-XP Access bow, embossed both sides16.4048-158-XP Control key, standard bow, embossed both sides48-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side12.8048-172-XP Control key, stainless steel LP section control key 56.7048-159-XP Lockout key, standard bow, embossed both sides 12.80Master Keys49-157-XP Standard bow, embossed both sides49-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side12.8049-171-XP Standard bow, stainless steel LP section key 49.4049-116-XP Large bow, embossed both sides49-115-XP Access bow, embossed both sides16.4049-158-XP Control key, standard bow, embossed both sides49-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side12.8049-172-XP Control key, stainless steel LP section control key 56.70Notes: 1) When ordering Level 1 Plus XP key blanks, Locksmith I.D. number must be furnished.2) For keys ordered with locks or cylinders see page Keys-20.3) LP Section keys are only available in stainless steel. Schlage recommends having LP section keys cut at the factorysince stainless steel will damage the cutters of most field key machines.Classic Primus ® I.D. CardsPart Number Level Price Each40-061-XP 1 Order in40-065-XP 1 Plus multiples of 5040-062-XP 2 $2.20Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-7

KEYS & KEYING • Keys Ordered SeparatelyEverest Primus Keys,Everest Primus I.D. Cards35-004EmbossedEverest Primus Key35-012 35-005Everest PrimusEmbossed ControlBack ofAll Keys(except unembossed)Facility orDealer ID NumberPRIMUSDO NOT DUPLICATEPat. 5,809,816DO NOT DUPLICATEPat. 5,809,816PRIMUSDO NOT DUPLICATEPat. 5,809,816Section001426Everest ® Primus ® Key Blanks and Cut KeysPart Number Description Price EachKey BlanksOrder in35-0046-PinStandard bow, embossed one side multiples of 5035-012 Standard bow, unembossed $5.2035-005ControlControl key, standard bow, embossed one side35-013 Control key, standard bow, unembossed35-006LockoutLockout key, standard bow, embossed one side35-019 Lockout key, standard bow, unembossed8.30Cut Keys48-0046-PinStandard bow, embossed one side48-012 Standard bow, unembossed48-005ControlControl key, standard bow, embossed one side48-020 Control key, standard bow, unembossed12.8048-006LockoutLockout key, standard bow, embossed one side48-019 Lockout key, standard bow, unembossedMaster Keys49-0046-PinStandard bow, embossed one side49-012 Standard bow, unembossed49-005ControlControl key, standard bow, embossed one side49-020 Control key, standard bow, unembossed12.80Everest Primus I.D. CardsPart Number Level Price EachOrder in40-060 7 or 8 multiples of 502.70Keys-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Everest Primus XP Keys,Everest Primus XP I.D. CardsKeys Ordered Separately • KEYS & KEYING35-004-XPEmbossedEverest Primus Key35-012-XP35-005-XPEverest PrimusEmbossed ControlBack ofAll Keys(except unembossed)Facility orDealer ID NumberPRIMUSDO NOT DUPLICATEPat. 5,809,816DO NOT DUPLICATEPat. 5,809,816PRIMUSDO NOT DUPLICATEPat. 5,809,816Section001426Everest ® Primus ® XP Key Blanks and Cut KeysPart Number Description Price EachKey BlanksOrder in35-004-XP6-PinStandard bow, embossed one side multiples of 5035-012-XP Standard bow, unembossed $5.2035-005-XPControlControl key, standard bow, embossed one side35-013-XPControl key, standard bow, unembossed35-006-XPLockoutLockout key, standard bow, embossed one side35-019-XPLockout key, standard bow, unembossed8.30Cut Keys48-004-XP6-PinStandard bow, embossed one side48-012-XPStandard bow, unembossed48-005-XPControlControl key, standard bow, embossed one side48-020-XPControl key, standard bow, unembossed$12.8048-006-XPLockoutLockout key, standard bow, embossed one side48-019-XPLockout key, standard bow, unembossedMaster Keys49-004-XP6-PinStandard bow, embossed one side49-012-XPStandard bow, unembossed49-005-XPControlControl key, standard bow, embossed one side49-020-XPControl key, standard bow, unembossed$12.80Everest Primus XP I.D. CardsPart Number Level Price EachOrder in40-060-XP 7 or 8 multiples of 502.70Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-9

KEYS & KEYING • Keys Ordered SeparatelySplit Key Construction Keys,Special KeysClassicEverest ®StandardHotel Cylindrical35-104 Key Blank48-104 Cut Key35-008 Key Blank48-008 Cut Key35-110 Classic Blank48-113 Classic Cut35-000 Everest Blank48-000 Everest Cut35-111 Classic Blank48-114 Classic Cut35-001 Everest Blank48-001 Everest Cut35-057Split Key Construction KeysPart Number PriceDescription Classic Everest EachKey BlanksConstruction key, standard bow, embossed 35-104 35-008 $5.40Construction insert 35-110 35-000Construction insert, A85, AL85, D85, ND85, or H185 function 35-111 35-0017.30Extractor tool 35-057 18.90Cut KeysConstruction key, standard bow, embossed 48-104 48-008 5.40Construction insert 48-113 48-000Construction insert, A85, AL85, D85, ND85, or H185 function 48-114 48-0017.30Notes:1) Split key construction keys are NOT available for interchangeable core cylinders.2) Split key construcion keys are ONLY available in L, Y, 0000 and ZZZZ Classic sections and C000 andD000 Everest sections35-250 35-251 L583-233-458 M504-271Special KeysPartPriceNumber Description Each35-250 Emergency key, A40, AL40, or D40 function35-251 Spanner key, A85, AL85, D85, ND85, or H185 function$3.30L583-233-458 Emergency turn, L9040 function 14.50M504-271 Emergency key, F40 or S40 function 1.6061-509* Emergency release key standard size, for occupancy deadbolts 7.2061-510* Emergency release key large, for occupancy deadbolts 14.00* Includes one key, ring, and instruction tag.Keys-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Presentation KeysKeys Ordered Separately • KEYS & KEYING35-22335-22435-22735-22835-229Presentation KeysPartPriceNumber Description EachKey Blanks35-223 5-Pin35-224 6-PinVelvet case with 2 standard bow Classic gold plated blanks, embossed both sides35-227 5-PinVelvet case with 1 large bow Classic gold plated blank, embossed both sides$113.0035-228 6-Pin35-229 6-Pin Velvet case with 1 Everest ® gold plated blankCut Keys48-223 5-Pin48-224 6-PinVelvet case with 2 standard bow Classic gold plated keys, embossed both sides48-227 5-PinVelvet case with 1 large bow Classic gold plated key, embossed both sides$124.0048-228 6-Pin48-229 6-Pin Velvet case with 1 Everest gold plated keyMaster Keys49-223 5-Pin49-224 6-PinVelvet case with 2 standard bow Classic gold plated keys, embossed both sides49-227 5-PinVelvet case with 1 large bow Classic gold plated key, embossed both sides$135.0049-228 6-Pin49-229 6-Pin Velvet case with 1 Everest gold plated keyNote:1) Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-11

KEYS & KEYING • Key StampingStamping AreaDO NOT DUPLICATEAA1765352CKey Symbol(Standard on Everestand Primus keysfor MK systems)Key SectionBitting(Not stamped on Everestor Primus keys)Key StampingPart Price EachDescription Key Type Specify Number KeyVisual Key Control (VKC) Classic conventional Stamp key symbol on key 50-217 $1.90with standard key symbols Everest ® & all Primus ® (furnished as standard)* — N/CNon-standard code***All conventional Non-standard code 50-233 5.20All Primus (6 characters maximum) 50-003 per sideClassic conventionalStamp key “Do Not Duplicate” XQ06-878DO NOT DUPLICATEEverest C Family conventional Use 35-002 blanks — N/CEverest B Family**,(furnished as standard)Everest D Family, all PrimusContact product support, new 50-219 3.50Custom die stamp*** Classic, Everest, all Primus dies are subject to a one timeper sidecharge that is quoted throughRFQ process; all new diesremain the property of SchlageLock companyClassic & Everest conventional,Delete key section50-220 3.50Delete key section from bow Everest PrimusClassic Primus (furnished as standard) — N/CBitting not stampedClassic conventional Delete key combination 50-221 3.50Everest & all Primus (furnished as standard) — N/CStamp bitting****Classic conventional (furnished as standard) — N/CEverest C Family conventional Stamp key bitting 50-233 5.20* Specify “delete key symbol on key” if VKC is not required. Available at no charge.** Everest B Family keys are stamped “RESTRICTED”.*** Only available on unembossed keys.**** Not available on Primus or Everest B and D Family keys or on keys with key symbols stamped (VKC).Note: 1) Key stamping locations may vary from those pictured above depending on key type and the amount of keystamping required.All 50-xxx charges are added as separate line itemsand priced separately.Keys-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Cylinder Stamping • KEYS & KEYINGAA1AA1Cylinder StampingPart PriceDescription Key Type Specify Number EachClassic conventional,50-216 $4.90Visual Key Control (VKC) orStamp key symbol.Concealed Key Control (CKC) Everest C & D conventionalSpecify face (VKC) or side (CKC).(standard key symbols only) Everest ® B Family (SFIC) — N/CAll Primus ® Stamp key symbol. Available side only. 50-002 4.90Non-standard codeAll Conventional Non-standard code (6 charactersmaximum). Specify face or side.50-216All Primus Non-standard code (6 charactersmaximum). Available side only.50-0024.90All 50-xxx charges are added as separate line itemsand priced separately.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-13

KEYS & KEYING • Construction Core ProgramFull SizeConstruction Core ProgramFull Size Construction Core ProgramTemporary construction cores may be ordered with full size interchangeable core locks, mortise cylinders and rim cylinders.These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge (50-231).See Terms & Conditions for more information.Features:• 6-Pin C keyway.• Construction cores have a two-tone face: the faceplate is a flat black finish (622) and the plug is unfinished brass.• Back of each core is marked with the letter that identifies the keyed alike group: A, B or C.• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately.• A control key is required to install and remove construction cores. Control keys must be ordered separately.If a control key is not ordered, one will be supplied at a charge of $10.00.• Construction cores may be returned for credit. Contact your Schlage representative for return authorization. Credit is issuedupon receipt of cores at our factory.23-030-ICX 48-101-ICX 48-056-ICXCONTROLFull Size Construction Core ProgramPartPriceNumber Description Specify Each23-030-ICX Construction core New jobs: Specify “ICX” $55.0048-101-ICX Cut key for construction phase (order separately) Existing jobs: Specify “ICA”, “ICB” or 5.8048-056-ICX Cut control key (order separately) “ICC”. 10.0050-231 Non-refundable handling charge (per core) 7.50Notes: 1) To order mortise and rim cylinders with full size construction cores for a new job, suffix ICX to non-Primus cylindernumber. Example: 30-008 ICX. For existing construction core combinations, specify ICA, ICB, or ICC.2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. OtherSchlage projects in the same area using the same or different contractors may use the same key. Where a higher degreeof security is desired, order a set of conventional or Primus ® cores in 606 or 626 finish keyed alike to a randomcombination. Specify “KA Group 1”. Such cores would not be assessed the handling fee and are not returnable toSchlage.Example:Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and onecontrol key. The following charges apply to this order:1. 23-030-ICX construction cores (150 units).2. 48-101-ICX cut keys (20 units).3. 48-056-ICX cut control key (1 unit).4. 50-231 Non-refundable handling charge (150 units-one per core ordered).Upon return of the cores to the factory the distributor will be credited for the following:1. 23-030-ICX construction cores (150 units).There is no credit for the keys or handling fee.Keys-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

Small FormatConstruction Core ProgramConstruction Core Program • KEYS & KEYINGSmall Format Construction Core ProgramTemporary construction cores may be ordered with small format interchangeable core locks, mortise cylinders and rimcylinders. These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge(50-231). See Terms & Conditions for more information.Features:• Best ® A keyway• Construction cores have a green or brown face. Each color is keyed alike to its own operating and control key.• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately.• A control key is required to install and remove construction cores. Control keys must be ordered separately.If a control key is not ordered, one will be supplied at a charge of $9.80.• Construction cores may be returned for credit. Contact your Schlage representative for return authorization. Credit is issuedupon receipt of cores at our factory.• Small format disposable cores may not be returned for credit.80-03548-310 48-311DUPLICATIONPROHIBITEDADUPLICATIONPROHIBITEDCONTROLASmall Format Construction CoresPartPriceNumber Description Specify Each48-310 Cut key for construction phase (order separately) Schlage assigns the color for each $5.3048-311 Cut control key (order separately) order at random. If a specific color is 9.80required, specify “GRN” for green and80-035 Construction core“BRN” for brown cores.34.0050-231 Non-refundable handling charge (per core) 7.50M204-152Small Format Disposable CoresPartPriceNumber Description EachM204-152 Disposable plastic construction core $4.00Example:Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys andone control key. The following charges apply to this order:1. 80-035 construction cores (150 units).2. 48-310 cut keys (20 units).3. 48-311 cut control key (1 unit).4. 50-231 Non-refundable handling charge (150 units-one per core ordered).Upon return of the cores to the factory the distributor will be credited for the following:1. 23-030-ICX construction cores (150 units).There is no credit for the keys or handling fee.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-15

KEYS & KEYING • Keying ChargesContract Master Keying, ContractConstruction Keying, OtherContract Master KeyingPartPriceNumber Description Each50-210 Cylinder Master keyed (MK), grand master keyed (GMK), Emergency Master keyed $14.10(EMK), and Single keyed (SKD) groups (charge does not apply to interchangeablecore)50-213 Primus ® Cylinder Master keyed (MK), grand master keyed (GMK), and Single keyed 14.10(SKD) groups (charge does not apply to interchangeable core)— Interchangeable core Master keyed (MK), grand master keyed (GMK), and Single N/Ckeyed (SKD) groupsNote: 1) Any cylinder operated by keys other than its own change key or Single keyed (SKD) groups within a master keysystem are subject to master keying charges. The Schlage Master Key Department determines and makes thefinal decision in the selection and use of key sections. 100% Expansion is allowed for new master key systemsunless otherwise specified.Contract Construction Keying (CK)/Split Key Construction KeyingPartPriceNumber Description Each50-211 Cylinder Construction keyed (CK) $8.20Notes: 2) Construction keyed cylinder charges are in addition to master keying charges.3) PKI packing is included at no extra charge.4) Construction keying not available with Primus cylinders or interchangeable core cylinders. Construction coresmay be ordered for interchangeable core locks, mortise cylinders and rim cylinders for use during construction.See Construction Core Program.5) Split key construction keying requires 6-pin cylinders.6) Construction keys must be ordered separately. See Split Construction Keys.Other Keying (Non-Master Keyed)PartPriceNumber Description Each— Cylinder keyed different (KD) or keyed alike to a Schlage selected combination (KA) N/Cin sets of 2 or more, include FSIC.— Cylinder 0-bitted or 1-bitted, as applicable* N/C50-212 Conventional cylinder keyed to a specified combination $7.4050-001 Primus cylinder keyed to a specified combination 7.40* Conventional non-IC cylinders: Available 0-Bitted. 1-Bitted is not available and if specified, 0-bitted is furnished.Conventional IC cylinders: Furnished 1-bitted. 0-Bitted is not available and if specified, 1-bitted is furnished.Primus cylinders: Furnished 0-bitted. 1-Bitted is not available and if specified, 0-bitted is furnished.Note: 7) Schlage locks and cylinders are furnished C123 keyway keyed different (KD) unless otherwise specified.All 50-xxx charges are added as separate line itemsand priced separately.Keys-16Price Book 72AEffective July 18, 2011 • Rev. 7/11

Residential Master & Construction KeyingKeying Charges • KEYS & KEYINGResidential Master Keying (RMK) and/or Residential ConstructionKeying (RCK)Qualifications:• Residential projects.• RMK and/or RCK must be specified on the order.• Systems are available in 5-Pin C keyway only.• Systems cannot be combined with Contract Master Key systems.• Two levels of keying maximum (Change Key and Master Key levels only).• Maison keying allowed.• No door detail labeling.Residential Master Keying (RMK)PartPriceNumber Description Each50-223 Cylinder Residential Master keyed (RMK) $2.3049-100 Residential Master Key - Not offered for commercial products 9.10Residential Construction Keying (RCK)/Lost Ball Construction KeyingPartPriceNumber Description Each50-224 Cylinder Residential Construction keyed (RCK) $2.3048-100 Residential Construction Master Key 5.20Notes: 1) Lost ball construction device is triggered by the highest level permanent key unless otherwise specified.2) Change keys packed in envelopes and packed in lock box. PKI packing available at no additional charge.3) Residential Construction keying charges are in addition to Residential Master keying charges.All 50-xxx charges are added as separate line itemsand priced separately.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-17

KEYS & KEYING • Keying ChargesCustom Presentation Keys,Homeowners Document Folders35-135-CMS-J175Builder LogoHOMEOWNER DOCUMENTSCustom Presentation KeysPartPriceNumber Description Each35-135-C* Large bow custom logo key (minimum order quantity: 400 keys) $1.9050-230 Die charge for key customization (one time charge on initial order) 190.00 net* Send Building Partnerships orders to address given at bottom of page.Notes: 1) Large bow custom logo keys are available as key blanks only. Cut keys are not available2) Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.Homeowners Document FoldersPartPriceNumber Description EachMS-J175* Document folder, plain $5.60MS-J175* Document folder, customized (minimum customized order quantity: 100 folders) 9.30* Send Building Partnerships orders to address given at bottom of page.Notes: 3) Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.Send Building Partnerships orders to:Trade MarketingSchlage Lock CompanyResidential Customer Service2119 E. Kansas City Rd.Olathe, KS 66061FAX: (800) 366-5625email: res_contact_center@irco.comKeys-18Price Book 72AEffective July 18, 2011 • Rev. 7/11

Bitting Lists, KSC Key ChartsKeying Charges • KEYS & KEYINGBitting Lists (Transcripts)PartPriceNumber Description Each50-123 Bitting list for factory master keyed products (requires written $177.00*authorization from end-user).50-120 Establish new master key system for field master keying (one-time 26.30charge). Each bitting is assessed a 50-121 or 50-122 charge below.50-121 New master key bitting for cylinders keyed in the field.50-120 charge assessed if this bitting establishes a new system.3.4050-122 New change key bitting for cylinders keyed in the field 2.60* Can be used for SiteMaster download (keying and bitting details) if ordered as such. Please specify SiteMasterdownload file if applicable in the details column. Information reequired: is Structure or original order number,end user name, city and state (used to verify the structure number). Also required is an email address for the enduser, include their full name to address the email and a “ Letter Of Authorization”.KSC Generic Key ChartsPartPriceNumber Description Each50-600 6-Pin system with 4096 change combinations furnished $975.00Notes: 1) KSC systems are for dealer or end-user maintained master key systems. KSC systems cannotbe converted or tied to factory established or factory maintained systems.2) KSC systems are furnished with instruction manual and binder.3) Not available for small format interchangeable cores.4) Number of valid change combinations provided is not guaranteed due to system constraints.4,096 is the theoretical number possible, actual number of changes will vary.All 50-xxx and 60-xxx charges are added asseparate line items and priced separately.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-19

KEYS & KEYING • Keying ChargesKeys Ordered with Locks or Cylinders, PKIKeys Ordered with Locks or CylindersPartPriceNumber Description Each50-215 Extra cut standard bow Classic or Everest ® C Family keys ordered with $3.40lock or cylinder50-214 Extra cut Primus ® keys ordered with lock or cylinder 8.1050-227 Extra cut large bow or access bow keys ordered with lock or cylinder 5.4050-228 Cut large bow or access bow keys substituted for standard bow Classic 2.60keys50-232 Extra cut restricted Everest B Family or Everest D Family keys ordered 5.80with lock or cylinder.Note: 1) Two standard bow keys are furnished as standard with each lock or cylinder.Pack Change Keys Independently (PKI)PartPriceNumber Description Per Key60-000 Pack change keys independently (PKI) for split keyconstruction keyingN/C60-001 Pack change keys independently (PKI) $0.42Note: 2) Split key construction keying: PKI packing is included at no extra charge.All 50-xxx and 60-xxx charges are added asseparate line items and priced separately.Keys-20Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Key BlanksQuicKey Program • KEYS & KEYINGQuicKey ProgramThe QuicKey Program may be used for quick delivery on keys and cores that are not part of stock products.Qualifications:• Orders must be for QuicKey products only and cannot be combined with any non-QuicKey item.• Orders must be accompanied by all required information. See Order Requirements in chart for complete details.• Incomplete orders or orders with product not qualifying for this program may be processed with standard delivery.• Orders must be with the QuicKey Order Form, see page Keys-25.Also available at Schlage.comQuicKey Product Availability and Order Requirements - Full Size Key BlanksAvailableTypicalProducts Key Family Order Requirements Lead TimeClassic - Key BlanksObverse None 10 Days*35-100 5-PinReverseEnd-user letter of authorization35-101 6-PinNumbered (Paracentric) indicating quantity, product and 10 Days35-056 ControlQuadkey sectionEverest Conventional Key BlanksEverest C Family single sections None35-002 DND Everest C Family multi-sections None35-009 Standard Existing facility code, job name and job 5 Days35-003 Control Everest D Familylocation. End-user letter of authorization ifshipping address is different thanoriginally authorized.Classic Primus Key Blanks• Level 1: Existing Primus number andsequence number or section.35-157 Standard Primus Obverse• Level 1+: Existing Primus number,35-157-XP Primus XP Obversesequence number or section and5 Dayslocksmith ID number.35-158 Control Primus Quad• Level 2S or 2M: Existing Primus number35-158-XP Primus XP Quadand section.• Levels 3 and 4: Existing Primus number,section and original signed Primusfacesheet (faxed copies not allowed).Everest Primus Key Blanks• Level 7: Existing Primus number, section35-004 Standard Everest C Familyand locksmith ID number.35-004-XP Everest XP C Family• Level 8: Existing Primus number, facilitycode and section.35-005 Control Everest D Family 5 Days• Level 9: Existing Primus number, facility35-005-XP Everest XP D Familycode, section and original signed Primusfacesheet (faxed copies not allowed).* Applies to all sections except the following; 35-100 = C and E; 35-101 = C, CE, E, EF, and F; 35-056 = C, CE, E, EF, H, and J.Notes: 1) Keyblanks (35-xxx) must be ordered in multiples of 50, except control keys. Cut keys can be ordered in any quantity.2) Key stamping is not available, except DO NOT DUPLICATE per XQ06-878 for Classic conventional sections.3) Longest lead-time prevails on orders with mixed lead-time product.4) Lead-time refers to the time between when the order is booked and acknowledged by Schlage and the shipment of anorder. Lead-times are subject to change.Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-21

KEYS & KEYING • QuicKey ProgramSFIC Everest and Best Key SectionKeys & CoresQuicKey Product Availability and Order Requirements - SFIC Keys and CoresAvailableTypicalProducts Key Family Order Requirements Lead TimeBest Key Section Key Blanks35-310 Best None 10 DaysEverest SFIC Key Blanks35-401 Embossed35-021 UnembossedEverest B Family5 DaysEverest SFIC Cut Keys48-401 Embossed48-021 Unembossed49-401 Embossed master Everest B FamilyExisting facility code, job name and job5 Days49-021 Unembossed master49-356 Embossed control49-022 Unembossed controlEverest SFIC Uncombinated CoresExisting facility code, job name and joblocation. End-user letter of authorization ifshipping address is different than originallyauthorized.location. End-user letter of authorization ifshipping address is different than originallyauthorized.80-036* Everest B FamilyExisting facility code, job name and joblocation. End-user letter of authorization ifshipping address is different than originally5 Daysauthorized.Everest SFIC Combinated CoresExisting facility code, job name and job80-037* Everest B Family location. End-user letter of authorization ifshipping address is different than originally5 Daysauthorized.* Specify 606, 626 and 613 (simulated) finish. Uncombinated cores are furnished less keys, pins and springs.Notes: 1) Keyblanks (35-xxx) must be ordered in multiples of 50, except control keys. Cut keys can be ordered in any quantity.2) Longest lead-time prevails on orders with mixed lead-time product.3) Lead-time refers to the time between when the order is booked and acknowledged by Schlage and the shipment of anorder. Lead-times are subject to change.Keys-22Price Book 72AEffective July 18, 2011 • Rev. 7/11

SITEMASTER 200 ® • KEYS & KEYING®Key System Management SoftwareDescription Part Number Price EachWindows Full Version on CD SM01-287 $2,556.00Upgrade SiteMaster 3.x Demo to Full Single User 50-280* 2,556.00Upgrade SiteMaster 3.x Full Single User to Multi-User 50-281** 1,060.00(Must have single user version to be able to upgrade)Notes: 1) For complimentary demonstration software please contact your local SSC sales rep. or free download at www.schlage.com.2) SiteMaster manuals have been replaced by an extensive help menu on the CD.3) SiteMaster comes without any information loaded. The download file needs to be ordered(see P/N50-123 ordering instructions) and Schlage is not responsible to load personnel information, etc.* Requires end user contact name, address, phone, and email (not yahoo or hotmail)** Require single user registration number.FormsDescription Part Number Price EachKey Record Form (order in multiples of 50) SM01-210 $0.36Download Free Demonstration Softwareat www.schlage.comPrice Book 72AEffective July 18, 2011 • Rev. 7/11Keys-23

KEYS & KEYINGNotesKeys-24Price Book 72AEffective July 18, 2011 • Rev. 7/11

QUOTE#PRICE BOOK#SHIPPING INSTRUCTIONSREQUESTED SHIP DATEORDER WRITTEN BYFOR MORE INFORMATION, CONTACT:NAME:PHONE:FAX:QUICK KEY ORDERACCOUNT NO.SHIP TO:Fax: (800) 452-0665E-mail: Order Entry Schlage Commercial@irco.comMail: Schlage Order Entry3899 Hancock ExpresswayColorado Springs, CO 80911P.O. NUMBERDATECustomer: #REF! P.O # InformationLINEITEM QTY PRODUCT KEYWAY FINISH DESCRIPTION Lead Time NOTES35-100 N/A Classic Key Blank 5 Pin * 10 Days35-101 N/A Classic Key Blank 6 Pin 10 Days35-056 N/A Classic Key Blank Control 10 Days35-002 N/A Everest Conventional Do Not Duplicate 5 Days(Everest D requires Letter of Authorization)35-009 N/A Everest Conventional Standard (Not available in Everest D) 5 Days35-003 N/A Everest Conventional Control 5 Days(Everest D requires Letter of Authorization)35-157 N/A Classic Primus Standard -Levels 3 & 4 Requires OriginalPrimus Face Sheet. Levels 1 & 2 requires Primus Number.5 DaysLevel 1+ requires Primus number & locksmith ID.35-157-XP N/A Classic Primus XP Standard -Levels 3 & 4 Requires OriginalPrimus Face Sheet. Levels 1 & 2 requires Primus Number.5 DaysLevel 1+ requires Primus number & locksmith ID.35-158 N/A Classic Primus Control-Levels 3 & 4 Requires OriginalPrimus Face Sheet. Levels 1 & 2 requires Primus Number,5 DaysLevel 1+ requires primus number & Locksmith ID.35-158-XP N/A Classic Primus XP Control-Levels 3 & 4 Requires OriginalPrimus Face Sheet. Levels 1 & 2 requires Primus Number.5 DaysLevel 1+ requires Primus number & locksmith ID.35-004 N/A Everest Primus Standard-Level 9 Requires Primus OriginalFace Sheet. Levels 8 Requires Primus Number, Level 75 Daysrequires Primus number & locksmith ID.35-004-XP N/A Everest Primus XP Standard-Level 9 Requires Primus OriginalFace Sheet. Levels 8 Requires Primus Number, Level 75 Daysrequires Primus number & locksmith ID.35-005 N/A Everest Primus Control-Level 9 Requires Primus Original FaceSheet. Levels 8 Requires Primus Number. Level 7 requires5 DaysPrimus number & locksmith ID.35-005-XP N/A Everest Primus XP Control-Level 9 Requires Primus OriginalFace Sheet. Levels 8 Requires Primus Number. Level 75 Daysrequires Primus number & locksmith ID.35-310 N/A Best Key Section Key Blanks 10 Days35-401 N/A Everest B SFIC Key Blanks Embossed-Requires Letter of Authorization 5 Days35-021 N/A Everest B SFIC Key Blanks Unembossed-Requires Letter of Authorization 5 Days48-401 N/A Everest B SFIC Cut Key Embossed-Requires Letter of Authorization 5 Days48-021 N/A Everest B SFIC Cut Key Unembossed-Requires Letter of Authorization 5 Days49-401 N/A Everest Cut Key Embossed-Master--Requires Letter of Authorization 5 Days49-022 N/A Everest Cut Key unembossed-Master--Requires Letter of Authorization 5 Days49-356 N/A Everest Cut Key Embossed-Control--Requires Letter of Authorization 5 Days49-022 N/A Everest Cut Key unembossed-Control--Requires Letter of Authorization 5 Days80-036 Everest SFIC Uncombinated Cores-Requires Letter of AuthorizationPlease provide keying schedule and master key summary form if 5 Daysordering master keyed products.80-037 Everest SFIC Combinated Cores-Requires Letter of Authorization.Please provide keying schedule and master key summary form if 5 Daysordering master keyed products.SC-5236

Sample Letter of AuthorizationFor All Restricted Key ProductsKEYS & KEYINGDISTRICT 10End UserLetterhead -REQUIREDDistrict 10 Schools555 Main StreetEnd User City, State 55555(555) 555-5555May 1, 2003Date - REQUIREDTo:Schlage Dealer100 East AvenueDealer City, State 11111RE: District 10, Jones Elementary SchoolDealer Name -RECOMMENDEDFacility Name - REQUIREDPlease consider this authorization to ship product for the above-referenced project.Include RegistryNumber &Facility Code(stamped on keys)for existing keysystemsJones Elementary School is to be keyed using a new Everest D Restricted Key System. For securityreasons, we would like to have all keys for this facility shipped to a location other than the job site.Master keyed products, however, can be shipped directly to the site. This letter authorizes Schlage toship our restricted products to the following addresses:Master Keyed Products, Construction Keys, Locks LessCylinders, and Locks with Construction CoresAttn: Building Project ManagerDistrict 10 Schools555 Main StreetEnd User City, State 55555Master Keys, Change Keys, Control Keys, and Key BlanksAttn: LocksmithDistrict 10 Lockshop1201 Fifth AvenueEnd User City, State 55555Authorized Ship-To Addresses -REQUIREDThese two addresses above serve as our only authorized shipment addresses for all orders placed forour facility. We understand that this letter will be kept on file and referenced for our future orders and thata new letter is only required to add, remove, or change authorized shipping locations.Sincerely,End User RepresentativeFacilities ManagerEnd UserRepresentativeSignature -REQUIREDLetter may be mailed or faxed to SchlageSchlage Restricted Order Processing3899 Hancock ExpresswayColorado Springs, CO 80911Price Book 72AEffective July 18, 2011 • Rev. 7/11Keys-27

KEYS & KEYING • Primus ChecklistPRIMUS AND EVEREST PRIMUS ORDERING CHECKLISTTO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDSIMPORTANT NOTESTo expedite processing of all Primus orders, it is highly recommended that Primusproducts be ordered separatelyFor Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS UnlessOtherwise SpecifiedFor All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS UnlessOtherwise SpecifiedPRIMUSEVEREST PRIMUSFOR LEVEL ONE✓✓The Distributor’s Primus number MUST beprovidedThe Sequence number MUST be providedFOR LEVEL ONE PLUSFOR LEVEL SEVEN✓✓✓The Distributor’s Primus number MUST beprovidedThe Locksmith’s Facility code MUST beprovidedThe Keyway MUST be provided✓✓✓The Distributor’s Primus number MUST beprovidedThe Sequence number MUST be providedThe Locksmith number MUST be providedFOR LEVEL TWOFOR LEVEL EIGHT✓✓The Dealer’s Primus number MUST beprovidedThe Sequence number and/or Section MUSTbe Provided✓✓The Distributor’s Primus number MUST beprovidedThe Keyway MUST be providedFOR LEVELS THREE & FOURFOR LEVEL NINE✓✓✓✓Orders Originating a System MUST includeboth an Original Facesheet and a SignatureCardAn Original Facesheet MUST accompany allsucceeding ordersThe Primus number MUST be indicated onthe FacesheetALL fields on the Facesheet MUST becompleted where applicable✓✓✓✓Orders Originating a System MUST includeboth an Original Facesheet and a SignatureCardAn Original Primus Facesheet MUSTaccompany all succeeding ordersThe Primus number MUST be indicated onthe FacesheetALL fields on the Facesheet MUST becompleted where applicableAll Primus Orders & Supporting Documentation Should be Sent To:SchlageAttn: Primus Order Processing3899 Hancock ExpresswayColorado Springs, CO 80911Keys-28Price Book 72AEffective July 18, 2011 • Rev. 7/11

Ingersoll-Rand Company3 11

Notes:➨1Ingersoll-Rand Company231

1 Ingersoll-RandMaster Keyed Order Add'l PageMS-I150 2 1

Account # P.O. #PART 1Job InformationHELPFUL HINTS• Fill in blanks for faster order processing.PART 2System DefinitionHELPFUL HINTS• If you do not know the Facility Code,Primus number, Registry number (R#),or the original factory order number foran existing system, contact CustomerService prior to placing the order:Tel. 1-800-847-1864Fax 1-800-452-0663• New systems for 7-pin Small Format ICEverest B Family require priorapproval by IR Security and SafetyConsultant.• Only compatible system types may beordered on the same purchase order.See Compatability Chart.• Classic refers to Obverse, Numbered(Paracentric), Quad, and Reverse keysection families.• Classic Primus refers to Primus Obverseand Primus Quad key section families.Page __________ of __________KEY SYSTEM SUMMARYJob NameCity State ZipCountrySYSTEM TYPE NEW EXISTINGMASTER KEYINGClassic Master Keyed Original Order # R #Classic Primus ® Master Keyed Original Order # R #Facesheet attached (All level 3 & 4 orders)Signature Card attached (New level 3 & 4 orders) Primus # LevelEverest ® B Family Master Keyed – Small Format IC Original Order # R #Letter of authorized ship-to address attached(New systems & change of address on existing systems) Facility CodeEverest C Family Master Keyed – Open Original Order # R #Everest D Family Master Keyed – Restricted Original Order # R #Letter of authorized ship-to address attached(New systems & change of address on existing systems) Facility CodeEverest Primus Master Keyed Original Order # R #Facesheet attached (All level 9 orders)Signature Card attached (New level 9 orders) Primus # LevelResidential Master Keyed – RMK Original Order # R #CONSTRUCTION KEYINGFull Size Construction Cores IC (A, B or C)(For Full Size IC locks and cylinders)Small Format Construction Cores (B or G) RN(For Small Format IC locks and cylinders)Construction Keyed – CK Original Order # R #(Split Key Method, not available for Primus and IC)Residential Construction Keyed – RCK Original Order # R #(Lost Ball Method, 5 pin C only)COMPATIBILITY CHARTKEY SECTION FAMILYCLASSIC CLASSIC EVEREST EVEREST PRIMUSSYSTEM TYPES 5-PIN 6-PIN PRIMUS B FAMILY C FAMILY D FAMILY C FAMILY D FAMILYMaster KeyingClassicPrimusEverest B FamilyEverest C FamilyEverest D FamilyEverest PrimusResidential, 5-Pin C Keyway OnlyConstruction KeyingFull Size Construction CoresSmall Format Construction CoresSplit KeyResidential, 5-Pin C Keyway Only© 2003 Ingersoll-Rand CompanyMS-I200.01 Rev 5/03

PART 3Common DataHELPFUL HINTS• Unless otherwise specified, 2 changekeys are furnished per lock or cylinder.• Unless otherwise specified key in boldtype is furnished.• RMK and/or RCK systems must beestablished in 5-pin, “C” key section.• Schlage Commercial’s Master KeyDepartment makes the final decision in theselection of key sections.• Schlage Commercial’s default keysection for new Master Key Systems isEverest C145 in the C Family.• Unless otherwise specified, industrystandard key symbols are stampedon Everest and Primus keys.• Bitting is only stamped as standard forClassic key sections and is not availablefor Everest or Primus Keys.PART 4Construction Key QuantitiesHELPFUL HINTS• Construction keys are packed in lockcarton containing packing slip.• Construction keys are not furnishedunless specified.• Split key construction keying is not availablefor Classic Primus or Everest PrimusPage __________ of __________CHANGE KEY QUANTITYFurnish: __________ Classic or Everest ® keys per lock or cylinder key symbol__________ Classic Primus ® or Everest Primus keys per lock or cylinder key symbolKEY TYPEKEY SECTION FAMILYCLASSIC CLASSIC EVERESTEVEREST PRIMUSDESCRIPTION 5-Pin 6-Pin PRIMUS B Family C Family D Family C & D FamilyStandard Bow 48-100 48-101 N/A N/A 48-009 N/A N/AStandard Bow, unembossed 48-130 48-131 48-053 N/A 48-015 48-015 48-012Standard Bow, stamped DND see Note see Note 48-157 48-401 48-002 48-002 48-004Access Bow 48-143 48-144 48-115 N/A N/A N/A N/ALarge Bow 48-140 48-141 48-116 N/A N/A N/A N/ANote: Specify key type and Do Not Duplicate in stamping instructions below.KEY SECTIONSpecial RequestCHANGE KEY PACKAGING AND SHIPPING INSTRUCTIONSPack keys independently (PKI) of lock or cylinder (Furnished standard at no charge with split-key construction keying)?Yes NoIf PKI, ship change keys to: Dealer (default) See Primus facesheet OtherSTAMPING INSTRUCTIONSStamp keys: With industry standard key symbol Do Not Duplicate (DND) With key stamping die XQNon standard codeStamp cylinder: With industry standard key symbol Non standard codeCylinder stamping location: Plug face (Not available for Primus) – VKC Concealed – CKCSYSTEM TYPE DESCRIPTION QUANTITY PART #RCK (Lost Ball) Residential Construction Key 48-100CK (Split Key) Everest C Family and D Family Construction Key 48-008Classic Construction Key 48-104Everest and Classic Extractor Tool 35-057Full Size Construction Cores Construction Key 48-101Control Key 48-056Small Format Construction Cores Construction Key 48-310(Best ® Style)Control Key 48-311© 2003 Ingersoll-Rand CompanyMS-I200.02 Rev 5/03

PART 5Change Key Definition forExisting SystemsPART 6Master Key QuantitiesHELPFUL HINTS• Select the appropriate part number(s)from the Key Selection Table.• Unless otherwise specified, key in boldtype is furnished.Page __________ of __________THE CHANGE KEYS BEING USED ON THIS ORDER ARE:All existing in the system All new exceptAll existing in the system exceptKEY SELECTION TABLEKEY SECTION FAMILYCLASSIC CLASSIC EVEREST ® EVEREST PRIMUSDESCRIPTION 5-Pin 6-Pin PRIMUS ® B Family C Family D Family C & D FamilyMaster KeysStandard Bow 49-100 49-101 N/A N/A 49-009 N/A N/AStandard Bow, unembossed 49-130 49-131 49-053 N/A 49-015 49-015 49-012Standard Bow, stamped DND see Note see Note 49-157* 49-401 49-002 49-002 49-004Access Bow 49-143 49-144 49-115 N/A N/A N/A N/ALarge Bow 49-140 49-141 49-116 N/A N/A N/A N/AControl KeysControl Key (except Hotel) N/A 49-056 49-158** N/A 49-003 49-003 49-005Control Key, unembossed (except Hotel) N/A 49-076 49-052 49-356 N/A N/A 49-020Control Key, Hotel N/A 49-056 N/A N/A 49-016 49-016 N/AEmergency KeysEmergency Key, Standard Bow N/A 49-102 N/A N/A 49-007 49-007 N/AEmergency Key, Large Bow N/A 49-142 N/A N/A N/A N/A N/A* For LP section, specify 49-171. **For LP section, specify 49-172.Note: Specify key type and check box Do Not Duplicate.Classic or Classic Primus orEverest Everest PrimusPart # Part # Level Qty. Per Master Key Symbol(s) = Total Quantity49-______ 49-______ GGMK . . . . . . . . . _____ ________________________________ ___________49-______ 49-______ GMK. . . . . . . . . . . _____ ________________________________ ___________49-______ 49-______ MK or RMK. . . . . . _____ ________________________________ ___________49-______ 49-______ Control . . . . . . . . . _____ ________________________________ ___________49-______ 49-______ Emergency . . . . . . _____ ________________________________ ___________49-______ 49-______ Other _____ ________________________________ __________Ship Master Keys to: Dealer See Primus Facesheet Other© 2003 Ingersoll-Rand CompanyMS-I200.03 Rev 5/03

PART 7Master Key Definition andFuture ExpansionHELPFUL HINTS• Do not use the letters “I”, “O”,“CK”, “KA, “KD” for any masterkey symbols.• Unless otherwise specified,the control key has the samecut as the highest-level keyin the system (Except SFICsystems).• Alter existing master keysymbols, as necessary, toreflect your system.Example:x AA AC thru AG (includes AC,AD, AE, AF & AG).• Attach additional sheets asnecessary.PART 8Operating InstructionsHELPFUL HINTS• Cross keying reduces thesecurity and expansion ofkey systems.• Unless otherwise specified,all hierarchical master keyswill operate cross-keyedcylinders.Page __________ of __________MASTER KEYS USED ON THIS ORDER PLANNED FUTURE EXPANSIONApprox. # of ChangeLevel Existing Master Keys New Master Keys List Future MK Key Symbols UnderSymbols Each New or Future MKExample:MK . . . . . . . . . . BA thru BE BF thru BH BJ, BK 40 eachx x x xGGMK . . . . . . . GGM GGMGMK . . . . . . . . . A thru thruMK . . . . . . . . . . AA thru thruMK . . . . . . . . . . BA thru thruMK . . . . . . . . . . CA thru thruMK . . . . . . . . . . DA thru thruMK . . . . . . . . . . EA thru thruMK . . . . . . . . . . FA thru thruMK . . . . . . . . . . GA thru thruMK . . . . . . . . . . HA thru thruCK . . . . . . . . . . CK CKControl . . . . . . . CONL CONLEmergency . . . EM EMOthers . . . . . . .RMK . . . . . . . . . AA thru thruRCK . . . . . . . . . RCK RCKCross-keyed Cylinder is operated by these change keys Cross-keyed Cylinder is operated by these change keysX ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________X ________ ____________________________________ X ________ ____________________________________© 2003 Ingersoll-Rand CompanyMS-I200.04 Rev 5/03

IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:

Ingersoll Rand Security TechnologiesSchlageAttn.: Primus Order Processing3899 Hancock ExpresswaySecurity, CO. 80911© 2009 Ingersoll RandMS-E120 Rev. 6/09

PRIMUS®Signature CardPrimus#For Internal Use OnlyOrder#G/Z/ES/MLevel 3, 4, and 9 Order AuthorizationTHIS SIGNATURE CARD ESTABLISHES AUTHORIZATION TO PURCHASE ADDITIONALPRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INSTALLED AT THE ADDRESS BELOW.THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER– FAXED COPIES NOT ACCEPTABLE –PRIMUS SECURITY LEVEL:3U (no exclusivity)3G (2-digit zip exclusivity)4Z (time exclusivity)4N (nationwide exclusivity)9U (no exclusivity)9G (2-digit zip exclusivity)9Z (time exclusivity)9N (nationwide exclusivity)PROJECT INFORMATIONClassic KeywaysEverest ®KeywaysProject Name (please print or type)Street Address (no P.O. Box)City State Zip CodeAUTHORIZED OWNER SIGNATURE(S):If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authority able to controlother signers on this form.1.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number2.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number3.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number4.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number5.Name (please print or type)Street (no P.O. Box)Title or Position City State Zip CodeSignature Date Phone Number— OVER —

DEALER OF LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)Dealer or Locksmith Account # Primus #Address (no P.O. Box)Dealer or Locksmith Company NameCity State Zip CodePhone NumberFax NumberContact 2 (Please print or type)Contact 1 (Please print or type)Contact 2 SignatureContact 1 SignatureEffective From:DatetoDateOwners Authorization By (Please print or type)Owners Authorization SignatureDateSPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signatureauthorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibilityfor validating the owner’s signature as identified on the Primus Signature Card before orderingthe material.SPECIAL INSTRUCTIONS:Please indicate any restrictions to authorized individuals listed on this form when purchasingadditional Primus product or duplicating keys.Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letterrequesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributorsand Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax ofthis card will not be accepted.Please mail the original copy to:IR Schlage SchlageAttn: Attn.: Master Master Key Key Control Department2315 3899 Briargate Hancock Parkway, Expressway Suite 700Colorado Springs, CO CO 80920 80911– FAXED COPIES WILL NOT BE ACCEPTED –© 2002 Ingersoll-RandMS-E130 Rev. 8/05

IntroductionPortable SecurityTable of ContentsPL Series Cross ReferencePS-3Key-In-Knob with CylinderPS-4Keyed Different . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-4Chain Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-4Key-In-Knob Less CylinderPS-5SFIC Less CylinderPS-6Full Size IC CorePS-7Less Cylinder - Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-7Custom Engraving Brass Padlocks and Chrome Plated Brass PadlocksPS-8Parts and AccessoriesPS-9Flex SecurityPS-12Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-12Security Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-13Security Cables and Locking Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-13Hasps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PS-14Price Book 72AEffective July 18, 2011 • Rev. 7/11PS-1

Portable SecurityIntroductionStandard Features for Commercial Series PadlocksCertification Meets or exceeds ASTM standards for standard steel shackle, shackle cutting andcorrosion resistanceLock Body Solid steel, brass and chrome plated brass - Solid steel resists impact, solid brass andchrome plated brass resist corrosionShackle Hardened alloy steel, double deadbolt locking mechanismCylinder* Conventional Key-In-Knob, 6-pin solid brass, pinned 5, C keyway, keyed different (KD) unlessotherwise specifiedCylinder Finish 606 Satin BrassKeysTwo nickel silver cut keys per lock, branded Schlage* Cylinders must be ordered as a separate line item for all products except conventional key in knob KD stocked.Standard Features for Commercial Series CablesLock Head Die-cast zinc, 407 satin finishCable Braided steel vinyl coated for greater cut resistance than twisted cablesCylinder* Conventional Key-In-Knob , 6-pin solid brass, pinned 5, C keyway, keyed different (KD)Cylinder Finish 606 Satin BrassKeysTwo nickel silver cut keys per lock, branded Schlage* Cylinders must be ordered as a separate line item for all products except conventional key in knob KD stocked.Standard Features for Commercial Series ChainsCertification Padlock meets or exceeds ASTM standards for tensile force, shock, shackle cutting,cycle test and corrosionPadlock* Recommended for use with KS72F2300 - Round style padlock with 2" shackleLock Body 2 5/8" Solid steel resists impactShackle Molybdenum hardened steel, patented interchangeable design, double deadbolt locking mechanismCylinder Conventional Key-In-Knob , 6-pin solid brass, pinned 5, C keyway, keyed different (KD)Cylinder Finish 606 Satin BrassKeysTwo nickel silver cut keys per lock, branded SchlageChain Triple heat treated Boron Manganese steel; unique six-sided chain links resist attack* Padlocks and chains must be ordered separately.Important Portable Security Ordering InformationAll products in this section are stocked and must be ordered in case quantities. Case quantity is listed with eachproduct. All prices listed are unit prices.Note: All cylinders will ship separately.PS-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

PL Series Cross Reference • Portable SecurityPL Part #/KS Part #PL Series Part # KS Series Part #PL1001J KS23D2200PL1002J KS23F2200PL1003J KS23F2200PL2001J KS43D2200PL2002J KS43F2200PL2003J KS43F2200PL3001J KS43D2200PL3002J KS43F2200PL4001J KS43D3200PL4002J KS43F3200PL4003J KS43F3200PL Series - DiscontinuedBody Size Shackle Dimension Shackle Dimension (metric)CylinderPart # Width Height Depth A B C A B C TypePL1001J 1 1/8" 29mmPL1002J 1 3/4" 2 1/8" 3/4" 5/16" 2" 3/4" 8mm 51mm 19mm KNKPL1003J 3" 76mmPL2001J 1 1/8" 29mmPL2002J 2" 2 1/8" 3/4" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNKPL2003J 3" 76mmPL3001J1 1/8"29mm2 1/4" 2 3/8" 7/8" 7/16"5/16" 11mmPL3002J 2" 51mm24mm KNKPL4001J 1 1/8" 29mmPL4002J 2" 2 1/4" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm ICPL4003J 3" 76mmKS Series - ReplacementBody Size Shackle Dimension Shackle Dimension (metric)CylinderPart # Width Height Depth A B C A B C TypeKS23D2200 1 1/2" 38mmKS23F2200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNKKS43D2200 1 1/2" 38mmKS43F2200 1 15/16" 2 3/16" 7/8" 3/8" 3/4" 9.5mm2"51mm 19mm KNKKS43D3200 1 1/2" 38mmKS43F3200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm ICNOTES: 1) Padlocks must be ordered and are shipped less cylinder– Keys & Keying must appear as a separate line item2) Reference Schlage Keys & Keying section for specific opitions and cylinders– All Key & Keying adders and deducts apply3) Key retaining cams for Classic KNK padlocks - KZ32CB1 - ordered as separate line item and ships separately4) Key retaining is not an option on Full Size IC productsShackle DimensionsPrice Book 72AEffective July 18, 2011 • Rev. 7/11PS-3

Portable Security • Key-in-Knob with CylinderKeyed Different - Key-In-KnobAvailable in:606 BrassAvailable in:652 SteelLocking Head is407 Satin FinishPadlock is 652 SteelKS23DKS43FKS72F KC Series KK SeriesBody Size Shackle ShackleDimension Dimension (metric)ListUPC Part # Width Height Depth A B C A B C Cylinder Case Master Price720018- Type Pack Pack EachKEYED DIFFERENT - BRASS997412 KS23D2300 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm KNK 6 24 $50.10997405 KS23F2300 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNK 6 24 50.30997290 KS43D2300 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm KNK 6 24 53.30997283 KS43F2300 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNK 6 24 53.60KEYED DIFFERENT - STEEL997764 KS72F2300 2 5/8˝ 2 3/8˝ 1 3/32˝ 7/16˝ 2˝ 7/8˝ 11mm 51mm 22mm KNK 6 18 $57.70NOTES:1) Ships with Key in Knob keyed different cylinders only. For other Key in Knob cylinder options order less cylinder padlocksfrom page PS-5 and cylinders separately.2) For Custom Engraving, see page PS-8.Cable Size Cable Size (metric)ListUPC Cylinder Case Master Price720018- Part # Length Diameter Length Diameter Type Pack Pack EachKEYED DIFFERENT997719 KC215E220 6' 5/8" 182cm 15mm KNK 1 5 $77.50NOTES: 3) Ships with Key in Knob keyed different cylinders only. For other Key in Knob cylinder options order less cylinder padlocksfrom page PS-5 and cylinders separately.Chain Size Chain Size Shackle Dimension Shackle Dimension(metric)(metric)ListUPC Part # Length Length A B C A B C Cylinder Case Master Price720018 - Type Pack Pack EachCHAIN ONLY999478 999478 5' 150 cm N/A N/A N/A 1 1 $75.30999461 999461 3' 3" 100 cm N/A N/A N/A 1 1 39.90NOTE:5) For master keyed or keyed alike product, order chain, padlocks and cylinders separately.Order chains #999478 or #999461 with padlock KS72F2300.Prices are for chains only.Chains and Padlocks must be ordered separately.Shackle DimensionsPS-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Key-In-KnobLess CylinderKey-in-Knob Less Cylinder • Portable SecurityAvailable in 606 BrassKS23DKS43FBody Size Shackle ShackleDimension Dimension (metric)ListUPC Part # Width Height Depth A B C A B C Cylinder Case Master Price720018- Type Pack Pack EachLESS CYLINDER 1 - BRASS000259 KS23D2200 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm KNK 6 24 $41.80000266 KS23F2200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNK 6 24 42.00000297 KS43D2200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm KNK 6 24 44.90000303 KS43F2200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNK 6 24 45.20NOTE:1) Key in Knob less cylinder padlocks ship with key stop, cylinder housing, and cylinder housing screw.2) For cylinder and keying options, refer to Cylinders and Keys & Keying sections.3) For customer engraving, see page PS-8.Price Book 72AEffective July 18, 2011 • Rev. 7/11PS-5

Portable Security • SFIC - Less CylinderLess Cylinder - SFICAvailable in 625Chrome PlatedBrassLocking Head is407 Satin FinishKS23DKS21FKC SeriesBody Size Shackle ShackleDimension Dimension (metric)ListUPC Part # Width Height Depth A B C A B C Cylinder Case Master Price720018- Type Pack Pack EachLESS CYLINDER - CHROME PLATED BRASS997658 KS11D1200 1 25/32" 2 3/16" 7/8" 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm SFIC 6 24 $24.90997641 KS11F1200 1 25/32" 2 3/16" 7/8˝ 1/4" 2" 3/4" 6.4mm 51mm 19mm SFIC 6 24 25.90997498 KS21D1200 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm SFIC 6 24 26.40997481 KS21F1200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm SFIC 6 24 27.70997375 KS41D1200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm SFIC 6 24 26.40997368 KS41F1200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm SFIC 6 24 27.70NOTES: 1) Product is shipped without cylinder. For cylinder and keying options, refer to Cylinders and Keys and Keying sections.2) For Custom Engraving, see page PS-8.Cable Size Cable Size (metric)ListUPC Cylinder Case Master Price720018- Part # Length Diameter Length Diameter Type Pack Pack EachLESS CYLINDER - SMALL FORMAT INTERCHANGEABLE CORE998747 KC215A130 2' 5/8" 60cm 15mm SFIC 1 5 $50.10998754 KC215B130 4' 5/8" 121cm 15mm SFIC 1 5 53.70NOTEs: 3) Key in Knob cables less cylinder ship with key stop, cylinder housing and cylinder housing screw.4) For cylinder and keying options, refer to Cylinders and Keys & Keying sections.PS-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Less Cylinder - IC CoreFull Size IC Core • Portable SecurityAvailable in 606 BrassKS43DKS43FBody Size Shackle ShackleDimension Dimension (metric)ListUPC Part # Width Height Depth A B C A B C Cylinder Case Master Price720018- Type Pack Pack EachLESS CYLINDER - BRASS999140 KS43D3200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm IC 6 24 $51.80999157 KS43F3200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm IC 6 24 54.00NOTES: 1) For cylinder and keying options, refer to Cylinders and Keys and Keying sections.2) For Custom Engraving, see page PS-8.Price Book 72AEffective July 18, 2011 • Rev. 7/11PS-7

Portable Security • Locking Cables, Security Chains and PadlocksCustom Engraving - OptionalKSxxxxxXKS-000-xxxCLR Assigned Number per Technical ServicesBrass Padlock/Chrome Plated Brass Padlock StockNOTES: 1) A one time set up cost of $85 net will be added to the first order under part number 50-020.2) A $2 net per piece engraving fee will be added to net product cost.3) Custom engraving requires submission of completed “Custom Logo Request” form (see Forms)and scaleable logo line art in DXF format to TSSEC@irco.com.4) Minimum order quantity is 6.5) XKS-000-XXX part number is assigned by Technical Services andis keyed in the accessory field as part of the product part number.Custom engraving is available on the following parts.Brass Padlocks - Listed on pageKS23D2300KS23F2300 PS-4KS43D2300KS43F2300KS23D2200KS23F2200 PS-5KS43D2200KS43F2200KS43D3200PS-7KS43F3200Chrome Plated Brass Padlocks - Listed on pageKS11D1200KS11F1200KS21D1200PS-6KS21F1200KS41D1200KS41F1200PS-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Stocked Parts and Accessories • Portable SecurityFEATURES & SPECIFICATIONS• Must be ordered in box quantity• Replacement parts and accessories discounted atfull lock discountListUPC Part # Description Box Carton Price720018- Quantity Quantity EachSERVICE REPAIR KIT - PADLOCK & CABLES - CONVENTIONAL KEY-IN-KNOB & SFIC997818 KZ390AL Service Repair Kit — Includes 10 of each part below except KZ35AC1, KZ35AC2, 1 6 $375.00KZ36EB0 - Qty 20; KZ37000 - Qty 1 and also includes pliersPADLOCK PARTS - CONVENTIONAL KEY-IN-KNOB998204 KZ32CB1 Key Retaining Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.90998211 KZ32CB2 Key Retaining Locking Cam, 70 Series 30 240 1.90997788 KZ32DA0 Driver 30 240 1.90PADLOCK PARTS - SFIC998259 KZ31CB1 Key Retaining Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.10998266 KZ31CB2 Key Retaining Locking Cam, 70 Series 30 240 1.10998303 KZ31DA0 Throw Member 30 240 2.20ACCESSORIES997900* KZ200AL 9" Nickel Plated Steel Retaining Chain 6 36 $6.40* Fits shackles diameters 1/4" - 3/8".Price Book 72Effective January 31, 2011 • Rev. 1/11PS-9

Portable Security • Parts and AccessoriesFEATURES & SPECIFICATIONS• Parts and Accessories discounted at full lock discount.• Must be ordered in box quantity.• While supplies last3/8" x 3/4" 5/16" x 2" 1/4" x 4"Shackle Dimension Shackle Dimension (metric)ListUPC Part # A B C A B C Box Carton Price720018- Quantity Quantity EachHARDENED STEEL SHACKLES - FOR USE WITH 10 SERIES PADLOCKS997214 KZ11A10 1/4" 3/4" 3/4" 6.4mm 19mm 19mm 6 36 $4.20997184 KZ11D10 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm 6 36 5.10997153 KZ11F10 1/4" 2" 3/4" 6.4mm 51mm 19mm 6 36 5.20997122 KZ11G10 1/4" 4" 3/4" 6.4mm 102mm 19mm 6 36 7.30HARDENED STEEL SHACKLES - FOR USE WITH 20 SERIES PADLOCKS997207 KZ11A20 5/16" 3/4" 3/4" 8mm 19mm 19mm 6 36 $5.10997177 KZ11D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 6.30997146 KZ11F20 5/16" 2" 3/4" 8mm 51mm 19mm 6 36 6.60997115 KZ11G20 5/16" 4" 3/4" 8mm 102mm 19mm 6 36 9.20HARDENED STEEL SHACKLES - FOR USE WITH 40 SERIES PADLOCKS997191 KZ11A40 3/8" 3/4" 3/4" 9.5mm 19mm 19mm 6 36 $6.40997160 KZ11D40 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm 6 36 8.00997139 KZ11F40 3/8" 2" 3/4" 9.5mm 51mm 19mm 6 36 8.20997108 KZ11G40 3/8" 4" 3/4" 9.5mm 102mm 19mm 6 36 11.40BRASS SHACKLES - FOR USE WITH 10 SERIES PADLOCKS997092 KZ12A10 1/4" 3/4" 3/4" 6.4mm 19mm 19mm 6 36 $4.20997061 KZ12D10 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm 6 36 5.10997030 KZ12F10 1/4" 2" 3/4" 6.4mm 51mm 19mm 6 36 5.20997009 KZ12G10 1/4" 4" 3/4" 6.4mm 102mm 19mm 6 36 7.30BRASS SHACKLES - FOR USE WITH 20 SERIES PADLOCKS997085 KZ12A20 5/16" 3/4" 3/4" 8mm 19mm 19mm 6 36 $4.10997054 KZ12D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 6.30997023 KZ12F20 5/16" 2" 3/4" 8mm 51mm 19mm 6 36 6.50996996 KZ12G20 5/16" 4" 3/4" 8mm 102mm 19mm 6 36 9.20BRASS SHACKLES - FOR USE WITH 40 SERIES PADLOCKS997078 KZ12A40 3/8" 3/4" 3/4" 9.5mm 19mm 19mm 6 36 $6.40997047 KZ12D40 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm 6 36 8.00997016 KZ12F40 3/8" 2" 3/4" 9.5mm 51mm 19mm 6 36 8.20996989 KZ12G40 3/8" 4" 3/4" 9.5mm 102mm 19mm 6 36 11.40Shackle DimensionsPS-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

Replacement PartsParts and Accessories • Portable SecurityFEATURES & SPECIFICATIONS• Must be ordered in box quantity• Replacement parts and accessories discounted atfull lock discount• While supplies lastListUPC Part # Description Box Carton Price720018- Quantity Quantity EachPADLOCK PARTS - CONVENTIONAL KEY-IN-KNOB & SFIC997801 KZ35AA1 Shackle Spring, 10 Series 30 240 $0.40997795 KZ35AA2 Shackle Spring, 20, 80 Series 30 240 0.40996972 KZ35AA3 Shackle Spring, 40, 90 Series 30 240 0.40996965 KZ35AA4 Shackle Spring, 70 Series 30 240 0.40996958 KZ35AB1 Shackle Mounting Screw, 10, 20, 40 Series 30 240 1.10997771 KZ35AB2 Shackle Mounting Screw, 70, 80, 90 Series 30 240 1.10997894 KZ35AC1 Locking Ball Bearing, 10, 20, 40, 80, 90 Series 30 240 0.86998136 KZ35AC2 Locking Ball Bearing, 70 Series 30 240 1.20998419 KZ35EC1 Bumper, 10, 20 Series 30 240 0.60998426 KZ35EC2 Bumper, 40 Series 30 240 0.60998402 KZ35EC3 Bumper, 80 Series 30 240 0.60998396 KZ35EC4 Bumper, 90 Series 30 240 0.60PADLOCK PARTS - CONVENTIONAL KEY-IN-KNOB998167 KZ32BB0 Cylinder Housing Screw 30 240 $0.86998174 KZ32CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 1.90998198 KZ32CA2 Locking Cam, 70 Series 30 240 1.90998228 KZ32CC0 Key Stop 30 240 0.40PADLOCK & CABLE PARTS - CONVENTIONAL KEY-IN-KNOB998143 KZ38BA1* Cylinder Housing, 20, 40, 70, 80, 90, KC Series 20 160 $6.80998150 KZ38BA2* Cylinder Housing, 10, KC Series 20 160 6.80PADLOCK PARTS - SFIC998235 KZ31CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.90998242 KZ31CA2 Locking Cam, 70 Series 30 240 1.90998273 KZ31CC1 Steel Retainer Plate, 10, 20, 40, 80, 90 Series 30 240 1.10998280 KZ31CC2 Steel Retainer Plate, 70 Series 30 240 1.10998297 KZ31CD0 Steel Retainer Plate Screw 30 240 1.40998433 KZ37000 Installation Tool 6 36 2.90CABLE PARTS998358 KZ33CA0 Throw Member, SFIC 30 240 $4.30998327 KZ33DB0 Washer, Key-In-Knob /SFIC 30 240 0.40998334 KZ33DC0 Driver Mounting Screw, Key-In-Knob 30 240 1.10998440 KZ34CA0 Cylinder Cap, Key-In-Knob 30 240 1.60998365 KZ34DA0 Driver, Key-In-Knob 30 240 2.00998341 KZ34DC0 Throw Member Mounting Screw, SFIC 30 240 1.10997665 KZ34ED0 Cylinder Cap Pin, Key-In-Knob 30 240 0.62998372 KZ36EA0 Dust Cover, Key-In-Knob /SFIC 30 240 2.10998389 KZ36EB0 Dust Cover Screw, Key-In-Knob /SFIC 30 240 0.62*Cable series can use either Cylinder Housing part KZ38BA1 or KZ38BA2.Price Book 72AEffective July 18, 2011 • Rev. 7/11PS-11

Portable Security • Flex SecurityPadlocksFLEX SECURITY FEATURES & SPECIFICATIONS• Non rekeyable• Retail vis-packed• Must be ordered in case quantity multiples999232 855156850410Special Use PadlocksShackle Dimension Shackle Dimension (metric) Padlock Case PriceUPC Part Number A B C A B C Width Qty. EachExtra Large Padlock720018999232 999232 1/2" 11" 4" 12mm 275mm 102mm 7 1/4" 5 $30.40Shackle-less Padlock720018855156 855156 – – – – – – 2 7/8" 6 $38.20Covered Laminated Steel PadlocksPart Shackle Dimension Padlock Case PriceUPC Number A B C Width Qty. EachCovered Laminated Steel Padlocks720018850410 * 850410 * 1/4" 1 1/8" 3/4" 1 1/2" 3 $20.90* 2 KA units per pack. 6 Packs keyed different per case.Shackle DimensionsPS-12Price Book 72AEffective July 18, 2011 • Rev. 7/11

Security Chains,Security Cables & Locking CablesFlex Security • Portable Security999461999478999201820406 999263999270 999249999256999218 999225 994800994862FLEX SECURITYFEATURES &SPECIFICATIONS• Non rekeyable• Retail vis-packed• Must be ordered incase quantity multiplesSecurity ChainsPart Link Dimension Chain Case PriceUPC Number A Length Qty. EachCinch Ring Security Chains720018999478 999478 1/2" 5' 1 $75.30720018999461 999461 1/2" 3' 3" 1 39.90Security Cables and Locking CablesPart Cable Dia. Loop Dimension Cable Case PriceNumber A B C Length Qty. EachHeavy Duty Locking Cable - Schlage Rekeyable720018999201 999201 5/8" – – 6' 5 $56.00Heavy Duty Flexible Steel Cables720018820406 820406 5/8" 3 3/8" 1 5/8" 7' 5 $34.50Flexible Steel Cables720018999270 999270 3/8" 2 1/4" 1 1/8" 30' 4 $44.00720018999263 999263 3/8" 2 1/4" 1 1/8" 15' 4 27.40720018999256 999256 3/8" 2 1/4" 1 1/8" 7' 4 16.20720018999249 999249 3/8" 2 1/4" 1 1/8" 4' 4 12.60Key Cable720018999218 999218 1/2" – – 5' 4 $23.10Resettable Combination Cable720018999225 999225 3/8" – – 5' 4 $23.80Flexible Steel Cable and Covered Laminated Steel Padlock720018994800 994800 3/8" 2 1/4" 1 1/8" 4' 4 $21.70720018994862 994862 3/8" 2 1/4" 1 1/8" 15' 4 34.20Link DimensionsLoop DimensionsPrice Book 72AEffective July 18, 2011 • Rev. 7/11PS-13

Portable Security • Flex SecurityHasps855101 855118 855125 855132855149 994848FLEX SECURITY FEATURES & SPECIFICATIONS• Non rekeyable• Retail vis-packed• Must be ordered in case quantity multiplesHaspsLocking CaseUPC Part Number Body Dimension Eye Dia. Qty. Price EachSecurity Hasps720018855101 855101 8 1/2" x 4 1/2" 5/8" 3 $31.40720018855118 855118 7 3/4" x 1 3/4" 1/2" 6 9.90720018855125 855125 5" x 2" 1/2" 6 9.60720018855132 855132 4 1/4" x 1 5/8" 9/16" 6 11.00720018855149 855149 7 1/4" x 1 5/8" 9/16" 6 9.90720018994848 994848 4 1/2" x 1 5/8 1/2" 6 5.10Shackle DimensionsPS-14Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTable of ContentsComplete LocksCL-2CL-Series: Conventional Offering . . . . . . CL-2CL-Series: Full Size Interchangeable CoreOffering . . . . . . . . . . . . . . . . . . . . . . . . . . .CL-3CL-Series: Small FormatInterchangeable Core Offering . . . . . . . . .CL-4Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .CL-5Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-5Non-Standard Door Thickness . . . . . . . . CL-5Special Locks . . . . . . . . . . . . . . . . . . . . . . CL-5PartsCL-6Trim Collars . . . . . . . . . . . . . . . . . . . . . . . CL-6Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-6Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . CL-6Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-6Drivers and Accessories . . . . . . . . . . . . . CL-7Cam Options . . . . . . . . . . . . . . . . . . . . . . CL-7Ratchet Lock Accessories . . . . . . . . . . . . .CL-7Trim Collar Options . . . . . . . . . . . . . . . . . .CL-7Complete Cylinders See Cylinders SectionHow To OrderForms & ExamplesProduct IdentificationCL 100 PBFinish Codesand DescriptionsCLCylinder SuffixPB = 6-Pin CylinderR = Full SizeInterchangeable CoeG = Everest Patented SFICFunction100 = Door Lock154 = Primus ® UL437 ListedDoor Lock174 = Primus ® ControlledAccess Door Lock200 = Drawer Lock254 = Primus ® UL437 ListedDrawer Lock274 = Primus ® ControlledAccess Drawer LockLock SeriesCodeDescription605 (US 3) Bright Brass626 (US 26D) Satin Chromium PlatedStandard Features*Certification ANSI A156.11, 1996, Series 4000, Grade 2BarCL100-Series 1" throw; CL200-Series 3/4" throwStrike 1/2" Bar strike and 1/4" bar strikeCylinder*** 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)**Door Range Spacers and strikes will accommodate doors 7/8", 1", and 1 1/8" thickKeys Two nickel silver cut keys per lock, 6-pin, C123 section*** Locks are furnished with standard features unless otherwise specified.** Items specified in C keyway will be furnished with cylinders keyed 5-pin and with 5-pin keys unless otherwise specified.*** For default keyway please see page TERM-16.Price Book 72AEffective July 18, 2011 • Rev. 7/11CL-1

CL • Complete LocksConventional OfferingCL100PBCL200PBCL-SeriesFinishes605Function Description 626KeyedCL100PB Door cabinet lock, 6-pin cylinder, 1" bolt throwCL200PB Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw$114.00Notes: 1) Keying options: see Keys & Keying.2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.CL-Series: Primus XP/ Primus Controlled AccessPrimus cylinders are offered for sale through specific channels of distribution based on security levelsSee Terms & Conditions for more information.Finishes605Function Description 626KeyedCL174PBCL174PB-XPCL274PBCL274PB-XPDoor cabinet lock, 6-pin cylinder, 1" bolt throwDoor cabinet lock, 6-pin cylinder, 1" bolt throwDrawer cabinet lock, 6-pin cylinder, 3/4" bolt throwDrawer cabinet lock, 6-pin cylinder, 3/4" bolt throwNotes: 3) Locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified.4) Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $10.40 per cylinder.5) Keying options: see Keys & Keying.Notes: 6) Locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified.7) Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $10.40 per cylinder.8) Keying options: see Keys & Keying.$132.00CL-Series: Primus XP/ Primus High Security UL 437Primus cylinders are offered for sale through specific channels of distribution based on security levels.See Terms & Conditions for more information.Finishes605Function Description 626KeyedCL154PBCL154PB-XPCL254PBCL254PB-XPDoor cabinet lock, 6-pin cylinder, 1" bolt throwDoor cabinet lock, 6-pin cylinder, 1" bolt throwDrawer cabinet lock, 6-pin cylinder, 3/4" bolt throwDrawer cabinet lock, 6-pin cylinder, 3/4" bolt throw$154.00CL-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Full Size Removable Core OfferingComplete Locks • CLCL777R CL888R CL920RCL-Series: Full-Size Interchangeable CoreFinishesFunction Description 605 626KeyedCL777R Door cabinet lock, FSIC, 1" bolt throwCL888R Drawer cabinet lock, FSIC, 3/4" bolt throw$139.00CL920R FSIC Cam Lock $107.00Notes: 1) Keying options: see Keys & Keying.2) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.CL-Series: Full-Size Interchangeable Core Primus XP/ Primus Controlled AccessFinishesFunction Description 605 626KeyedCL774RCL774R-XPCL874RCL874R-XPCL974RCL974R-XPDoor cabinet lock, FSIC, 1" bolt throwDoor cabinet lock, FSIC, 1" bolt throwDrawer cabinet lock, FSIC, 3/4" bolt throwDrawer cabinet lock, FSIC, 3/4" bolt throwFSIC Cam LockFSIC Cam LockNotes: 3) Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $10.40 per cylinder.4) Keying options: see Keys & Keying.$150.00$128.00CL-Series: Full Size Interchangeable Core Ratchet LockFinishesFunction Description 626KeyedCL929R Ratchet Lock, FSIC $137.00Full Size Interchangeable Core OptionDescription Specify PriceFull Size Construction Core * T suffix Example: N/CLess Full Size Core J suffix Example: Deduct $25.00from lock price* Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying .Price Book 72AEffective July 18, 2011 • Rev. 7/11CL-3

CL • Complete LocksSmall Format Interchangeable Core OfferingCL721G CL771G CL725G CL775GCL-Series: Everest Restricted Small Format Interchangeable CoreFinishesFunction Description 626KeyedCL721G Door cabinet lock, SFIC, 1" bolt throwCL771G Drawer cabinet lock, SFIC, 3/4" bolt throwCL725G Everest Patented SFIC Rim Latch Lock$108.00CL775G Everest Patented SFIC Rim Deadbolt LockNote:1) For small format construction core, specify suffix HD. Example: B560HD. Available at no additional charge. Locksare assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.CL720G CL728G CL729GCL-Series: Everest Restricted Small Format Interchangeable CoreFinishes605Function Description 626KeyedCL720G Everest Patented SFIC Cam Lock $102.00CL728G Everest Patented SFIC Mail Box Lock $84.00CL729G Everest Patented SFIC Ratchet Lock $138.00Note:2) Please refer to Everest small format interchangeable core key control policies, under the Terms & Condition Section.CL-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Strikes, Non-Standard Door Thickness,Special LocksOptions • CLCL10-355CL10-354StrikesAdd toDescription Specify Lock PriceBar strike, 3/4" x 1 31/32" x 1/2", standard CL10-355Bar strike, 3/4" x 1 31/32" x 1/4", standard CL10-354N/CNote: 1) For slotted strike (CL10-352), see CL Parts: Strikes.Non-Standard Door ThicknessAdd toDescription Specify Lock PriceLock for 1 3/8" door 1 3/8" door thickness $2.10Special Locks⧖ Extended Factory Lead TimeNot subject to standard discount termsPriceDescription Specify EachClassic Cabinet Lock for doors 1/8" to 3/4" thick XB03-232, door hand and door thickness $292.00Everest Cabinet Lock for doors 1/8" to 3/4" thick XB03-232EV, door hand and door thickness 292.00Primus Cabinet Lock for doors 1/8" to 3/4" thick XB03-232P, door hand and door thickness 292.00Everest Primus Cabinet lock for doors 1/8" to 3/4" thick XB03-232EP, door hand and door thickness 292.00Classic Cabinet Lock for doors over 7/8" to 2" thick XB06-530, door hand and door thickness 352.00Everest Cabinet Lock for doors over 7/8" to 2" thick XB06-530EV, door hand and door thickness 352.00Primus Cabinet Lock for doors over 7/8" to 2" thick XB06-530P, door hand and door thickness 352.00Everest Primus Cabinet Lock for doors over 7/8" to 2" thick XB06-530P, door hand and door thickness 352.00Notes: 2) Locking provided by swinging cam. Attached to door with hex nut.3) Keying options: see Keys & Keying4) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.5) For Everest D family and restricted keyways (Quad, Numbered, Reversed) add $10.00. This does not apply toPrimus families. See Terms & Conditions for more information.Shaded items are standard components and arefurnished with locks unless otherwise specified.Price Book 72AEffective July 18, 2011 • Rev. 7/11CL-5

CL • PartsTrim Collars, Strikes, Adapters, Screws36-031Trim CollarsPart Specify PriceNumber Finish Description Each36-031 • 1 3/16" diameter x 5/8" depth $7.70CL10-352CL10-354CL10-355StrikesPartPriceNumber Description EachCL10-352 Slotted strikeCL10-354 Bar strike, 3/4" x 1 31/32" x 1/4", standard $2.10CL10-355 Bar strike, 3/4" x 1 31/32" x 1/2", standardAdaptersPartPriceNumber Description EachCL10-350 Spacer $2.10ScrewsPartNumber DescriptionPriceEachCL10-301 Retaining screw $0.26CL-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Drivers and Accessories, Trim CollarsParts • CLDrivers and Accessories for CL100/200/ 725/721/ 777/888 SeriesPartPriceNumber Description EachCL10-360 Universal Driver bar for CL100/ 200 $1.60CL10-361 Driver bar for CL100/ 200PB 1.60CL10-362 Driver bar for CL100/ 200PB 1 3/8" long 1.60CL7788-PA-D Actuator for FSIC CL locks 1.60CL725-1 Spacer for 6 pins SFIC 1.40CL-ETS1 External trim plate spacer 2.10CLTR78 Trim rings 626 or 605 2.30CL-720G CamPartPriceNumber Description EachCL720-3-1 CL720 short cam inverted hand $2.10CL720-3-2 CL720 long inbent cam, vertical hand 2.10CL720-3-3 CL720 long offset cam, inverted hand 2.30CL720-3-4 CL720 long straight cam, vertical hand 2.30CL720-3-5 CL720 long shall offset cam, inverted hand 2.30CL775-SP Strike pack for CL775 (Latch lock) 2.10CL725-SP Strike pack for CL725 (Deadbolt lock) 2.10CL729-Ratchet Locks AccessoriesPartPriceNumber Description EachCL729S-2 Optional strap for 3/8" material thickness $6.70CL729S-3 Optional strap for 5/8" material thickness 9.50CL720/920 Trim CollarsPartPriceNumber Description EachTR201 Trim collar for CL720/ 920, 1/8" (626,605) $2.90TR202 Trim collar for CL720/ 920, 1/4" (626,605) 3.50TR203 Trim collar for CL720/ 920, 3/8" (626,605) 3.90TR200A Trim collar package for CL720/ 920, includes all three 10.40Price Book 72AEffective July 18, 2011 • Rev. 7/11CL-7

CLNotesCL-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionTOOLS & KITSTable of ContentsKeying Tools & KitsTool-2Full Size Pin Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-2Full Size Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-3Small Format Interchangeable Core Pin Kits . . . . . . . . . . Tool-4Small Format Interchangeable Core ServiceEquipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-4Competitive Keying Kits . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-5Competitive Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . Tool-5ToolsTool-6Installation Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tool-6Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-7Torx ® Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-7KitsTool-8Portable Security Repair Kit . . . . . . . . . . . . . . . . . . . . . . Tool-8Home Secure RCK Accessories . . . . . . . . . . . . . . . . . . . Tool-8Maintenance Kits (Replacement Parts Assortments) . . . . . Tool-8Installation JIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool-9Mortise JIG (wood) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tool-10How To OrderForms & ExamplesPrice Book 72AEffective July 18, 2011 • Rev. 7/11Tool-1

TOOLS & KITS • Keying Tools & KitsFull Size Pin Kits40-119 40-133 40-134Full Size Pin KitsPartPriceNumber Description Contents Each40-070 Primus ® pin kit Sidebars Finger pins Sidebar springs $367.00Finger pin springs Plug holder40-119 Pin kit, seal-tight metal box Bottom pins Retainer cap pins Removal tool 312.00Master pins Retainer cap pin springs T-Pin SpringTop pins Shim stock T-pinPin springs Tweezers Removable CapRetainer caps Follower bar40-132 Retail Keying Kit, seal-tight Bottom pins B-Series cylinder bars T-Pin Spring 200.00metal box Top pins Key gage T-pinPin springs Follower bar Removable CapCylinder caps Cap-removal toolCap spring and pins Retaining Rings40-133 Home Secure Pin kit Bottom pins Tweezers Construction balls 344.00Top pins Retaining rings Retainer cap pinsMaster pins Retainer caps T-Pin SpringFollower bar Retainer cap pin springs T-pinRemoval tool B-Series cylinder bars Removable CapKey gage B-Series driversCylinder springs Shim stock40-134 Pin kit, snap-tight plastic box Bottom pins Key gage Removable Cap 93.40Top pinsFollower barPin springs T-Pin SpringRetainer cap pins T-pinNote: 1) For replacement pins and springs, see Cylinders.Tool-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

92 10PROFESSIONALTOOLS®Full Size Keying ToolsKeying Tools & Kits • TOOLS & KITS40-104 40-074 40-075BLUE PUNCH #BP201PRO-LOKPRO-LOK T OLS & A CE SORIESORANGE, CA 92 67QUALITY9 8 58 7 6 5 4 3 2 1 0PRO-LOK®40-116 M204-20040-0997 6 4 3M540-000Aluminum follower andMaster Pin RemoverM540-056M540-051Full Size Keying ToolsPartPriceNumber Description Each40-066 Primus ® plug holder $94.6040-074* Everest vise jaw upgrade kit 67.5040-075** Key bitting punch for Everest ® C Family andobverse keys2,280.0040-104 Key gage (All Schlage keys except SFIC) 13.1040-116 Shell loading tool 110.0040-099 Key bitting punch for Everest D-Family 2,734.00M204-168 Lubriplate 5.90M204-200 Tweezers 31.20M204-201 Shim (pack of 25) 24.40M540-051 Follower 2.70M540-056 Retainer cap removal tool 47.50M204-200 Tweezers 31.30M540-000 Aluminum Follower and Master Pin Remover 43.00* Adds Everest ® C Family capability to Blue Punch key machines(designed for Obverse keys) with serial numbers below 990358,manufactured before July 1999.** For all conventional and Primus ® keys with Obverse and Everest ® CFamily sections onlyPrice Book 72AEffective July 18, 2011 • Rev. 7/11Tool-3

92 10PROFESSIONALTOOLS®TOOLS & KITS • Keying Tools & KitsSmall Format Interchangeable CorePin Kit and Service EquipmentSmall Format Interchangeable Core Pin KitsPartPriceNumber Description Contents Each40-129 A2 System pin kit Blocking pin springs Plug retainers $634.00Blocking pinsCapping blockBottom pinsCapping toolCapsEjector toolMaster/build-up/top pins Key gageTumbler springs TweezersNote: 1) For pin kit refills, see Cylinders.40-071Everest ® B Family Key Bitting Punch40-181Falcon/Best ® SFIC Key Bitting Punch40-128SFIC Key GageBLUE PUNCH #BP201PRO-LOKPRO-LOK T OLS & A CE SORIESORANGE, CA 92 67QUALITY9 8 59 8 7 6 5 4 3 2 1 07 6 4 38 7 6 5 4 3 2 1 0PRO-LOK40-171IC Decode, Dump Tool40-172Ejector Pin40-173Staking ToolM540-000Aluminum Follower andMaster Pin RemoverSmall Format Interchangeable Core Service EquipmentPartNumber DescriptionPriceEach40-071* Key bitting punch, Everest ® B Family keys only $2,870.0040-128 Key gage, A2 system 12.9040-181 Key bitting punch, Falcon/Best ® 2,702.0040-171 IC decode, rekey, dump tool 193.0040-172 Ejector Tool 36.4040-173 Staking Tool 36.40M540-000 Aluminum Follower and Master Pin Remover 43.00* For service of this keymachine, contact:Pro-Lok655 North Hariton St.Orange, CA 92668(714) 633-0681FAX (714) 633-0471Tool-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Competitive Keying Kits and Keying ToolsKeying Tools & Kits • TOOLS & KITS40-090Titan/Kwikset Keying Kit40-094Weiser Keying KitCompetitive Keying Kits enable Schlage Residential B and F-Series cylinders to be keyed into a competitorʼs key system.Competitive Keying KitsPartPriceNumber Description Contents Each40-090 Titan/Kwikset competitive Bottom pins Follower bar Retainer cap pinskeying conversion kit Top pins Cap removal tool Retainer cap pin springsPin springs Key gage B-Series plugsTweezers Retainer rings F-Series plugs40-094 Weiser competitive keying Bottom pins Follower bar Retainer cap pins$387.00conversion kit Top pins Cap removal tool Retainer cap pin springsPin springs Key gage B-Series plugsTweezers Retaining rings F-Series plugsNote: 1) For replacement pins, springs and plugs, see Cylinders: Competitive Keying Kit Refills.Competitive Keying ToolsPartPriceNumber Description EachM504-435 Titan/Kwikset Key gage with bag$12.10M504-439 Weiser key gage with bagPrice Book 72AEffective July 18, 2011 • Rev. 7/11Tool-5

TOOLS & KITS • ToolsInstallation40-149Universal Clamp40-154AL & ND Template40-155L-Series Template (front side)40-1521 3/8" Thick Door Adapterx 2 3/8" Backset40-159H-Series Template40-157L-Series Template (reverse side)40-1535" Backset Adapter40-158Mortise Pocket Filler (edge)40-0261 1/2" Bushing (old style)Strike Marking Chisels40-029 40-030Latch Marking Chisels40-0311" Front40-0321 1/8" FrontTool-6Price Book 72AEffective July 18, 2011 • Rev. 7/11

Installation ToolsInstallation ToolsPart Description PriceNumberEach40-017 AL and D-Series Lever castle nut wrench $9.6040-026 Bushing, 1 1/2", for 40-012 jig 36.2040-029 Strike marking chisel - full lip strikes 57.9040-030 Strike marking chisel - 1 1/8" x 2 3/4" 64.1040-031 Latch marking chisel - 1" x 2 1/4" 55.3040-032 Latch marking chisel - 1 1/8" x 2 1/4" 55.3040-049 Tool box, for 40-006 kit 204.0040-050 Tool box, for 40-055 kit 180.0040-112 Circular strike bit for machine equipment 630.0040-149 Universal Clamp 174.0040-152 Backset Adapter for 1-3/8" doors and/or 2-3/8" Backset 170.0040-153 Backset Adpter for 5" Backset 118.0040-154 AL and ND Series Template 171.0040-155 L Series Template (front side) 250.0040-157 L Series Template (reverse side) 250.0040-158 L Series mortise pocket filler (edge) 126.0040-159 H Series Template 215.0040-035 Strike locator - 7/8" 39.7040-015 7/8" Boring bit 149.0040-179 Strike locator - 1" 39.7040-175 1" Boring bit 76.8040-176 2-1/8" Multi-spur bit 193.0040-177 1-1/2" Muliti-spur bit 168.0040-178 Quick change bit adapter 132.00M204-198 Boring jig, for AL or D-Series Levers 12.20M504-271 Tool to remove AL and D-Series levers 1.40M504-306 Circular faceplate wrench 1.80021415 Spanner wrench, D-Series Knobs and L-Series 3.10M504-347 Socket screw key, for 40-012 jig 1.70M504-413 Installation tool, interchangeable core 12.80N523-108 Tool to remove AL and D-Series levers 1.20Tools • TOOLS & KITS021415M504-413M504-271Torx ® ToolsPart Number Description Price EachM504-424 Tool T-8 $31.20M504-425 Tool T-15M504-426 Tool T-20M504-427 Tool T-30M504-428 Tool T-1030.10N523-108Price Book 72AEffective July 18, 2011 • Rev. 7/11Tool-7

TOOLS & KITS • KitsRCK Accessories, Maintenance KitsHome Secure RCK AccessoriesPartNumber DescriptionPriceEach50-110 Home Secure Keying Chart $398.00Fifteen construction key combinations, each with 600compatible home owner combinations for a total of 9,000key combinations. Includes userʼs manual.P513-024 Home Secure Construction Key Envelopes 0.40P513-023 Home Secure Owner Key Envelopes 0.4034-401 Home Secure Replacement Construction Balls (pack of 32.901,000 construction balls)Maintenance Kits (Replacement Parts Assortments)PartNumber DescriptionPriceEach40-054 L-Series maintenance kit $696.0040-097 ND-Series Lever maintenance kit 512.00KZ390ALPortable Security Repair KitPortable Security Repair KitsPartPriceNumber Description EachKZ390AL Portable Security Repair Kit supports all Portable $508.00Security Commercial Padlocks and Locking Cables,SFIC and KNK. See PS-9 for additional detailsTool-8Price Book 72AEffective July 18, 2011 • Rev. 7/11

Installation KitsKits • TOOLS & KITS40-147Complete Installation Kit40-148Installation JIGM504-497Case Only40-1762 1/8" Multi Spur Bit40-1771 1/2" Multi Spur Kit40-175 1" Bit40-015 7/8" Bit40-1791" Strike Locator40-0357/8" Strike Locator40-178Quick Change Bit Adapter40-029Full Lip Strike Chisel40-0301 1/8" x 2 3/4"Strike Chisel40-0311" x 2 1/4" Latch Chisel40-0321 1/8" x 2 1/4"Latch ChiselInstallation KitsPartNumber Description ContentsPriceEach40-147 Installation Kit for Locksets & Deadbolts40-148 40-175 $1,824.00Kit includes JIG, Case, (2) Multi-spur bits, (4) latch/strike M504-497 40-179chisels, (2) Bushing Plates, Quick Change bit adapter,40-176 40-17840-177 40-0291” Auger bit & strike locator40-030 40-03140-032M504-497 Case Only — 161.0040-148 Installation JIG only — 1,383.00Notes:1) For F-Series installation, 40-015 and 40-035 (Page Tool-7) is required.2) For 40-147, doors requiring thrubolt holes and/or 7/8" edge bores, bits sold separately. Reference Tool-7.Price Book 72AEffective July 18, 2011 • Rev. 7/11Tool-9

TOOLS & KITS • Kitsinstallation Kits40-160Mortise Lock JIG40-1615/8" Wood Cutter Bit40-16211/16" Wood Cutter Bit40-1633/4" Wood Cutter Bit40-16413/16" Wood Cutter Bit40-1657/8" Wood Cutter Bit40-16615/16" Wood Cutter Bit40-1671" Wood Cutter Bit40-1681 1/16" Wood Cutter Bit40-1691 1/4" Wood Cutter Bit40-170Long Boring ShaftInstallation KitsPartNumber Description ContentsPriceEach40-160 Installation kit for mortise lock 40-160 40-169 $958.00Kit includes: Jig, Case (3 wood 40-165 40-170cutter bits and long boring shaft) 40-167Installation ToolsPart Description PriceNumberEach40-161 5/8" Woodcutter Bit $91.1040-162 11/16" Woodcutter Bit 91.1040-163 3/4" Woodcutter Bit 91.1040-164 13/16" Woodcutter Bit 91.1040-165 7/8" Woodcutter Bit 98.9040-166 15/16" Woodcutter Bit 98.9040-167 1" Woodcutter Bit 98.9040-168 1-1/16" Woodcutter Bit 98.9040-169 1-1/4" Woodcutter Bit 124.0040-170 Long boring shaft for locks up to 6" 188.00Tool-10Price Book 72AEffective July 18, 2011 • Rev. 7/11

IntroductionMERCHANDISING AIDSTable of ContentsDisplay MountsMerch-3Solid Oak Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3Special Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3MiscellaneousMerch-4Finish Selector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4Plastic Lock Case Cover . . . . . . . . . . . . . . . . . . . . . . Merch-4Promotional Items . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4How To OrderForms & ExamplesProduct literature is available, contact Customer Service.Price Book 72AEffective July 18, 2011 • Rev. 7/11Merch-1

®®®®®®®®®®®®®®®®MERCHANDISING AIDS • Display MountsSolid Oak MountsSolid Oak Mounts44-104 44-105 44-106 44-10744-108 44-109* 44-110 44-11144-112 44-113 44-119* 44-120*44-121XL11-80644-16144-162* Top and bottom holes are 4" center to center.Dexter by Schlage44-070 44-133 44-132 44-157Merch-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

Display Mounts, Special PartsDisplay Mounts • MERCHANDISING AIDSMount DimensionsFaceplate C A BacksetWidthBCross BoreDisplay MountsPart Dimensions PriceNumber Description A B C Overall Each44-104 B (except BR260 & B260E) 2 3/8" 1 1/2" 1 1/8" 6" x 9 1/2" $84.6044-105 A, F/FA, B/BA (single) and BE 2 3/8" 2 1/8" 1" 6" x 9 1/2" 84.6044-106 A with B/BA, F/FA, FE,and H (double) 2 3/8" 2 1/8" 1" 6" x 14" 102.0044-107 A, F/FA, B/BA (triple) 2 3/8" 2 1/8" 1" 6" x 14" 108.0044-108 A, F/FA, B/BA (quadruple) 2 3/8" 2 1/8" 1" 6" x 24 1/2" 136.0044-109 F/FA, FE300 2 3/8" 2 1/8" 1" 6" x 24 1/2" 112.0044-110* L9000 2 3/4" — — 8 1/2" x 14" 107.0044-111 A, B600/700/800, D Knob, S (single) 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" 120.0044-112 D Lever, AL (single), ND Lever 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" 141.0044-113 A, S, D Knob (triple) 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 24 1/2" 168.0044-115 Clear plastic mount ring — 2 1/8" — 2 1/2" x 1" 33.4044-119 F300 BOW 2 3/8" 1 1/2" (top)2 1/8" (bottom)1" 6" x 24 1/2" 85.7044-120 F300 CEN 2 3/8" 1 1/2" (top)2 1/8" (bottom)1" 6" x 24 1/2" 85.7044-121 S200, H 2 3/8" 1 1/2" (top)2 1/8" (bottom)1" 6" x 14" 110.0044-161 FE & BE Keypad Lock Mount 2 3/8" 2 1/8" 1" 6 " x 14" 88.4044-162 FE & BE Keypad Lock & 1 1/2" (top)Keypad Deadbolt Mount2 3/8"2 1/8" (bottom) 1" 6 " x 19 " 109.00* For special L lock mount, see Special Parts.Notes: 1) Price does not include lock.2) L400-Series mounts are not available.Dexter by Schlage MountsPart No. Description List44-070 Dexter 3 Hole Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) $63.4044-132 Dexter 1 Hole Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) 46.9044-133 Dexter Handleset Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) 71.4044-157 Dexter Handleset Decorative Trim - Cirrus - Mount (2-1/8˝ Cross Bore, 1˝ Edge Bore) 71.40Special Parts⧖ Extended Factory Lead Time Not subject to standard discount termsPartNumber DescriptionPriceEachXL11-806 Modified 44-110 display mount with see-through window $405.00Note: 1) If you are unable to find your required hardware solution in this price book, please refer to ourCustom Product Request Process on page iv.Price Book 72AEffective July 18, 2011 • Rev. 7/11Merch-3

MERCHANDISING AIDS • MiscellaneousFinish Selector Kit, Plastic Lock Case Cover,Promotional Items,39-029Finish Selector KitPartPriceNumber Description Each39-029 Finish selector kit$35.30Finishes: 505, 605, 606, 609, 612, 613, 619, 620, 622, 625, 626, 629, 630, 716, 643ePlastic Lock Case CoverPartPriceNumber Description Each39-042* Plastic lock case cover (for display), L-Series $59.40* For lock cases manufactured after January, 1998.Merch-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

GlossaryAActive Door (in a pair of doors): The leaf that opens first and the oneto which the lock is applied.AHC: Indicates that the individual so identified is a qualified ArchitecturalHardware Consultant and member of the Door and Hardware Institute.Anti-Friction Bearing: Any bearing having the capability of effectivelyreducing friction.Anti-Friction Latch Bolt: A latch bolt designed to reduce friction whenthe bolt starts to engage the lock strike.Architectural Hardware: Term applied to all hardware used in buildingconstruction but particularly that used on or in connection with doors,windows, cabinets and other movable members.Armored Front: A lock that consists of two plates: one, the under plate,is fastened to the case and is unfinished; two, the finish plate, is fastened tothe under plate and when in place covers the cylinder set screws thus protectingthem from tampering. Used on mortise locks.Armor Plate: A plate similar to a kick plate but covering the door to agreater height, usually 40" (1040 mm) or more from the bottom.Astragal: A molding or strip whose purpose is to cover or close the gapbetween the edges of a pair of doors. Some types overlap, others meet atthe center line of the gap. (See Coordinator.)Auxiliary Dead Latch: A supplementary latch that automatically deadlocksthe main latch bolt when the door is closed. (Also called DeadlockingLatch Bolt.)Auxiliary Lock: A lock having a latch bolt or a dead bolt operated by akey or a thumbturn or both. This lock is often used in addition to anotherlock, which may or may not be key operated but which has a latch boltoperated by knobs or levers.BBack Check: Optional feature in hydraulic door closers slowing theopening swing of door somewhere between 60 and 85 degrees of opening.Designed to protect an object behind the door. Not intended to act as anoverhead stop.Backset (of a lock): The horizontal distance from the face of the lock tothe center line of knob hub, keyhole or cylinder. (Measured from the highside of a beveled door.)Backset (of a hinge): The distance from the edge of the door to thehinge.Ball-Bearing Hinge: A hinge equipped with ball bearings between thehinge knuckles to reduce friction (See Anti-Friction Bearing.)Bevel (of a door): The angle of the lock edge in relation to the face ofthe lock stile. Standard bevel is 1/8" in 2" (3.2 mm in 50.8 mm). If otherwisedetailed it must be so noted in ordering locks.Bevel (of a lock): A term used to indicate the direction in which the latchbolt is in dined: regular bevel for doors opening in, reverse bevel for doorsopening out.Bevel (of a lock front): The angle of a lock front when not at rightangle to the lock case, allowing the front to be applied flush with the edge ofa beveled doorBit (of a key): The projecting blade, cut in a manner that actuates thetumblers and permits the lock bolts to be operated.Bored Lock (or Latch): Lock or latch whose parts are intended forinstallation in holes bored in a doorBox Strike: A strike that also provides a complete housing to protect thebolt openings.Builders Hardware: See Architectural Hardware.Butt (Hinge): A type of hinge designed for mortising into the edge of thedoor and into the rabbet of a door frame.CCam (of a cylinder): A rotating piece attached to the end of the cylinderplug to engage the locking mechanism.Cane Bolt: A heavy cane-shaped bolt with the top bent at right angles;used on the bottom of doors.Case (of a lock): The box containing the lock mechanism.Casement Hinge: A hinge to swing a casement window. The term isoften used to describe a hinge designed to throw the sash out far enough topermit cleaning the outside of the glass from the inside of the room on anoutward-swinging casement.CDC: Indicates that the individual so identified is a Certified DoorConsultant and member of the Door and Hardware Institute.Chain Bolt: A spring bolt actuated by a chain attached to the spring boltfor application at the top of the door.Chain Door Fastener: A device that limits the opening of a door bymeans of a chain.Changes (Key): The different bittings or tumbler arrangements in a seriesof locks.Checking Floor Hinge: A device placed in the floor that combines topand bottom pivots for hanging the door with a controlled speed dosingmechanism.Continuous Hinge (also called Piano Hinge): A hinge designedto be the same length as the moving part to which it is applied as, forexample, the lid covering the keyboard of a piano.Coordinator: A device used on a pair of doors to ensure that the inactiveleaf is closed before the active leaf. Necessary when an overlapping astragalis present and exit devices, automatic or self latching bolts are used withclosers on both door leaves.Cremone Bolt: A device of surface application that, by a turn of knob orlever handle, locks the door or the sash into the frame, top and bottom.Cup Escutcheon: A door plate, for use on sliding doors, having arecessed panel to afford finger hold and to contain a flush ring andsometimes a cylinder, all being flush with the surface of the plate.Cylinder (of a lock): The cylindrical-shaped assembly containing thetumbler mechanism and the keyway, which can be actuated only by thecorrect keys.Cylinder Collar: A plate or ring used under the head of a cylinder.Cylinder Lock: A lock in which the locking mechanism is controlledby a cylinder.Cylindrical (locks and latches): A term used to describe boredlocks, which have a cylindrical case into which a separate latch bolt casefits.Cylinder Screw: The set screw that holds a cylinder in place bypreventing the cylinder from being turned after installation.DDeadbolt (of a lock): A lock bolt having no spring acton nor bevel, andwhich is operated by a key or a turn piece.Deadlock: A lock equipped with a dead bolt only.Deadlocking Latch Bolt: A latch bolt incorporating a plunger that isheld in a retracted position when a door is closed, thus preventing the boltfrom being retracted by end pressure.Dogging Device: As used in exit devices, a mechanism that fastens thecross bar in the fully depressed position, and also retains the latch bolt orbolts in a retracted position, thus permitting free operation of the door fromeither side.Door Bolt: A manually operated rod or bar attached to a door providingmeans of locking.Door Closer Bracket: A device whereby a door closer may be installedon the frame rather than directly on the door.Door Closer or Check: A device combining a spring for closing and acompression chamber into which the liquid or air escapes slowly, thusproviding a means of controlling the speed of the dosing action.Door Holder: A device that holds a door open at selected positions.Door Pivot: A hinging device embodying a fixed pin and a single joint.Most types include lateral fastening.Price Book 72AEffective July 18, 2011 • Rev. 7/11Gloss-1

GlossaryDoor Stop: A device to stop the swing or movement of a door at a certainpoint. Also an architectural term defining that part of a door frame againstwhich the door closes.Double Cylinder Dead Bolt: Any type of auxiliary lock requiring a keyto project or retract the dead bolt (lock or unlock) from either side.Double-Throw Bolt: A bolt that can be projected beyond its firstposition into a second, or fully extended one, thus providing extra security.Drawer Roller: A device used to ease the sliding of a drawer open orshut, usually with a metal or fiber wheel rotating in a metal frame.Drawer Slides: A mechanism employing guides and rollers that guideand support the drawer, permitting easy operation.Drivers: The upper set of pins in a pin tumbler cylinder, which, activatedby the springs, project into the plug until raised by insertion of the key.Drop Escutcheon (or Key Plate): One having a pivoted plate thatcovers the key hole.Drop Ring: A ring handle attached to a spindle that operates a lock orlatch. The ring is pivoted but remains in a dropped position when not in use.Dummy Cylinder: A mock cylinder without any operating mechanismfor use where effect is desired.Dummy Trim: Trim only, without lock; usually used on the inactive door ina pair of doors.Dust-Proof Strike: A strike with a spring plunger that completely fills thebolt hole when the bolt is not projected.Dutch Door Bolt: Device for locking together the upper and the lowerleaves of a Dutch door.EEdge Plate: An angle or channel-shaped guard used to protect the edgeof a door.Edge Pull: A pull mortised into the edge of a sliding door.Elbow Catch: A spring-loaded device embodying a rocker arm and anglestrike, for locking the inactive leaf of a pair of cabinet locks.Electric Strike: An electrical device that permits releasing of the doorfrom a remote control.Escutcheon (Elongated): A plate long enough to span a lock caseand having holes for knob bushing, bit key, cylinder, turn knob and similaroperating members as required.Escutcheon (Key): See Key Plate.Exit Device: A door-locking device de signed to grant instant exit bypressing on a cross bar that releases the locking bolt or latch.Extension Flush Bolt: A flush bolt in which the connection betweenbolt head and operating mechanism is by means of a rod inserted through ahole bored in the thickness of the door.Extension Link: A device used to provide long backsets in bored locks.FFace (of a lock): The exposed surface that shows in the edge of a doorafter installation. (See Front.)Fast Pin Hinge: One in which the pin is fastened permanently in place.Finish Builders Hardware: Hardware that has a finished appearanceas well as a functional purpose and that may be considered a part of thedecorative treatment of a room or building. Also termed ArchitecturalHardware, Finish Hardware and Builders Finish Hardware.Fire Exit Bolt: See Exit Device.Floor Closer: A closing device installed in the floor under a door.Floor Hinge: A combined pivot hinge and closing device set either in thefloor or in the bottom of the door. It may be spring type only or may becombined with liquid control.Flush Bolt: A door bolt so designed that when applied it is flush with theface or edge of the door.Flush Cup Pull: A pull mortised flush into a door, having a ring pull thatfolds Hat into the cup of the pull.Flush Ring: A flush door pull mortised in a door, having a ring pull thatfolds flat into the cup of the pull.Foot Bolt: A type of bolt applied at the bottom of a door and arranged forfoot operation. Generally the bolt head is held up by a spring when the dooris unbolted.Friction Catch: Any catch which when it engages a strike is held in theengaged position by friction.Friction Hinge: A hinge designed to hang a door and hold it at anydesired degree of opening by means of friction control incorporated in theknuckle of the hinge.Front (of a lock): The plate through which the latching or locking boltsproject. (See Face.)GGrand Master Key: A key that operates locks in several groups, each ofwhich has its own master key.Guard Bar: A series of two or more cross bars generally fastened to acommon back plate to insure protection of glass or screen in a door.HHand (of a lock, etc.): A term used to indicate the direction of swing ormovement, and/or locking security side of a door.Handed (locks, etc.): A term used to indicate that the article is for useonly on doors of the designated hand.Harmon Hinge: A hinge designed to swing a door into a pocket at aright angle with the frame.Hasp: A fastening device consisting of a loop and a slotted hinge plate,normally secured with a padlock.Hinge: Two plates pined together by a pin and attached to a door and itsframe whereby a door is supported and is enabled to swing or move.Hinge Stile (of a door): The stile to which the hinges are applied asdistinguished from the lock stile.Horizontal Spring Hinge: A spring hinge mortised horizontally into thebottom rail of a door and fastened to the floor and head frame with pivots.Hub: The part of a lock through which the spindle passes to actuate themechanism.IInactive Door (or leaf): That leaf of a pair of doors that does notcontain a lock, but is bolted when closed, and to which the strike is fastenedto receive the latch or bolt of the active door.Indicator Button: A device used in connection with a hotel lock toindicate whether or not the room is occupied.Integral (locks and latches): A term used to describe a type ofmortise lock having cylinder in the knob.Interconnected Lock: (Also known by a number of different tradenames) A lock having a separate latch and dead bolt mechanically interconnectedand installed in round bored openings in the face and edge of a door.It is best known for providing dead bolt security with the life safety feature ofsimultaneous retraction. When the dead bolt is projected, a single turn of theinside knob retracts both the dead bolt and the latch bolt. This simultaneousretraction function is also available with some functions of mortise locks.Invisible Hinge: A hinge so constructed that no parts are exposed whenthe door is closed.KKeeper: Synonymous with Strike.Key Change: The combination of cuts in a key that enable it to operatethe lock for which intended.Key Plate: A small plate or escutcheon having only a keyhold.Keyway: The aperture in lock cylinders that receives the key and closelyengages with it throughout its length.Gloss-2Price Book 72AEffective July 18, 2011 • Rev. 7/11

GlossaryKick Plate: A protective plate applied on the lower rail of the door toprevent the door from being marred.Knob: A projecting handle for operating a lock.Knob Shank: The projecting stem of a knob into which the spindle isfastened.Knob Top: That part of the knob that the hand grasps.Knuckle: The enlarged part of a hinge into which the pin is inserted.LLatch Bolt: A beveled spring bolt, usually operated by a knob, handle orturn.Leaf (of a pair of doors): One of the two doors forming a pair ofdoors.Letterbox Back Plate: A plate, similar to a letterbox plate, attached tothe inside of a door to allow the passage of mail.Letterbox Plate: A date attached to the door with an opening to permitinsertion of mail.Lever Handle: A horizontal handle for operating the bolt(s) of a lock.Lever Tumbler: Flat tumbler having a pivoted motion actuated by theturning of the key and controlling the locking function.Lip of a Strike: The projecting part on which the latch bolt rides.Lock Rail (of the door): The horizontal member of a door intended toreceive the lock case.Lock Set: A lock, complete with trim, such as knobs, escutcheons orhandles.Lock Stile (of a door): The stile to which the lock is applied asdistinguished from the hinge stile.Loose Joint Hinge: A hinge having but two knuckles; the pin isfastened permanently to one knuckle, the other contains the pinhole,whereby the two parts of the hinge can be disengaged by lifting. Thesehinges are handed.Loose Pin Hinge: A hinge having a removable pin to permit the twoparts of the hinge to be separated.MMagnetic Catch: A cupboard catch that uses a magnet to hold the doorclosed.Master Key: Operates any quantity of cylinders of different individual keychanges.Masterkeying: An arrangement of cylinders having individual keychanges, which permits them all to be operated by a simple key called amaster key.Mono Lock: See Preassembled Lock.Mop Plate: A narrow plate similar to a kick plate, of sufficient height toprotect against the swish of the mop.Mortise: A cavity made to receive a lock or other hardware; also the act ofmaking such a cavity.Mortise Bolt: A door bolt designed to be mortised into a door rather thanapplied to its surface.Mortise Lock (or Latch): A lock designed to be installed in a mortiserather than applied to the door's surface.Mullion: A fixed or movable post dividing an opening vertically.NNightlatch: An auxiliary lock having a spring latch bolt and functioningindependently of, and providing additional security to, the regular lock of thedoor.OOlive Knuckle Hinge: A paumelle hinge with knuckles forming an ovalshape.Overhead Concealed Closer: A closer concealed in the head framewith an arm connecting with the door at the top rail.PPanic Exit Device: See Exit Device.Paracentric: A term used in connection with cylinder plugs havingprojections on the sides of the keyway that extend beyond the verticalcenter line of the keyway.Paumelle: A style of hinge embodying a single pint of the pivot type,generally of modern, or streamlined design.Pin Tumblers: Small sliding pins in a lock cylinder, working against coilsprings and preventing the cylinder plug from rotating until the pins areraised to the proper alignment by bitting of key.Pivot: See Door Pivot.Plug (of a cylinder): The round part containing the keyway and rotatedby the key to transmit motion to the bolt(s).Preassembled Lock: A lock that has all the parts assembled as a unitat the factory, and when installed in a rectangular notch cut into the dooredge, requires little or no disassembly.Prison Lock: A heavy lock designed especially for use on jail cells.Push Plate: A plate applied to the lock stile to protect the door againstsoiling and wearQQuadrant (Dutch Door): A device to fasten together the upper and thelower leaves of a Dutch door.RRabbet: A term used to describe the abutting edges of a pair of doors orwindows so shaped as to provide a tight fit. One half of the edge projectsbeyond the other half, usually 1/2 . Also used to define that portion of a doorframe into which the door fits.Rabbeted Lock (or Latch): A lock in which the face conforms to therabbet found on a rabbeted door.Rail (of a door): A horizontal member that pins the stiles. May beexposed as in a paneled door, or concealed as in a flush doorReinforcing Unit: A metal box-shaped reinforcement for use in a metaldoor in which a bored lock is to be installed. It provides both vertical andhorizontal latch support.Reverse Bevel: See Bevel.Reversible Lock: A lock which, by reversing the latch bolt, may be usedby any hand. On certain types of locks, other parts must also be changed.Rigid Lock: See Preassembled Lock.Rim: A term indicating articles of hardware designed for application to thesurface of doors and windows.Roller Latch: A friction door latch employing a roller latch head underspring tension, which engages a strike having a recess formed to receive theroller.Roller Strike: A strike having a rolling member at the point of latch boltcontact to minimize friction.Rose: A trim plate attached to the door under the knob. It sometimes actsas a knob bearing.Rounded Front: A lock or bolt front conforming to the rounded edge ofa double acting door. The standard radius is 4" (101.6 mm).SSash Balance: A spring device used to counterbalance the weight of awindow sash or other vertical sliding part.Sash Center: A pivoted support for transom or sash and comprised oftwo parts, one of which contains a pivot, the other a socket for the pivot.Sash Chain: A metal chain adapted for use with sliding sash, attached tothe sash and to the counterbalancing sash weight.Price Book 72AEffective July 18, 2011 • Rev. 7/11Gloss-3

GlossarySash Cord: Cord or rope used similarly to sash chain and in place ofchain.Sash Cord Iron: A small metal holder inserted in the edge of the sash,to which sash cord or sash chain is attached.Sash Fast: A fastener attached to the meeting rail of double-hungwindows.Sash Lock: A sash fast with a locking de vice controlled by a keySash Pole: A wood or metal pole to which a sash pole hook is attached.Sash Pole Hook: A metal hook attached to a wooden or metal poleused to lower or raise a transom or sash beyond hand reach.Sash Pulley: A pulley mortised into the frame of a double-hung sashframe over which the sash cord or sash chain passes.Sash Socket: A metal plate containing a hole or cup to receive a sashpole hookSash Weight: A weight used to balance sliding sash, usually of cast ironor, if conditions require, of lead.Screen Door Latch: A small locking or latching device used on screendoors and operated by a knob or a lever handle.Screwless Knob: A knob attached to a spindle by means of a specialwrench as distinguished from the more commonly used side knob screw.Screwless Rose: A rose with concealed method of attachment.Secret Gate Latch: A surface-applied latch operated by a concealedbutton or other device; usually used on office gates.Shank (of a knob): The projecting stem of a knob into which the spindleis fastened.Shelf Pin: A pin for supporting a shelf; also called a shelf support or shelfrest.Shutter Operator (also called a Shutter Worker): A deviceincorporating a hinge and a method of opening or closing a shutter bymeans of a crank or turn from inside without opening window.Side Knob Screw: A set screw used to fasten a knob to a spindle.Signal Sash Fastener: A sash fastening device to lock double-hungwindows that are beyond reach from the floor It has a ring for a sash polehook. When locked, the ring lever is down; when the ring lever is up, itsignals by its upright position that the window is unlocked.Spindle (of a knob): The bar or tube connected with the knob or leverhandle that passes through the hub of the lock or other wise engages themechanism to transmit the knob action to the bolt(s).Split Astragal: An astragal that is split through the middle, allowing eachdoor leaf to operate independentlySpring Hinge: A hinge containing one or more springs to move the doorinto the de sired position. It may be either single or double acting.Stile (of a door): A vertical member of the door structure; each door hastwo, a lock stile and a hinge stile.Stop (of a lock): The button, or other small device, that serves to lockthe latch bolt against the outside knob or thumb piece or unlock it if locked.Another type holds the bolt retracted.Store Door Handle: A heavy grip or pull mounted on sectional orelongated plates and provided with a thumb piece to operate the latch tripof a store door lock.Strap Hinge: A surface hinge of which one or both leaves are ofconsiderable length.Strike: A metal plate or box that is pierced or recessed to receive the boltor latch when projected. Sometimes called Keeper.Surface Hinge: One having both leaves surface applied.Swinging Latch Bolt: A bolt that is hinged to a lock front and isretracted with a swinging rather than a sliding action. Sometimes calledHinged Latch Bolt.Swivel Spindle: A spindle having a joint midway in its length to permitthe knob at one end to be made rigid by the stop works while the other endis free to operate.TT Handle: A cross handle for actuating the bolt of a lock and used inplace of a knob.T Hinge: A surface hinge with the short member attached to the jamb andthe long member attached to the door.Template Hardware: A term indicating any item of hardware that ismade to template; that is, exactly matching the master template drawing asto spacing of all holes and dimensions.Thimble: The socket or bearing attached to an escutcheon plate in whichthe end of the knob shank rotates.Three-Point Lock: A device sometimes required on three-hour firedoors to lock the active leaf of a pair of doors at three points.Threshold: A strip fastened to the floor beneath a door, usually requiredto cover the joint where two types of floor material meet.Throw (of a deadbolt or latch bolt): Measurement of the maximumprojection when bolt is fully extended.Thumb Piece (of a handle): The small pivoted part above the grip ofa handle to be pressed by the thumb to operate a latch bolt.Transom Bar: That part of a door frame that separates the top of a dooror a window from the bottom of the transomTransom Catch: A fastener applied to a transom and having a ring bywhich the latch bolt is retracted.Transom Chain: A short chain used to limit the opening of a transom;usually provided at each end with a plate for attachment.Transom Lift: A vertically operated device attached to a door frame andtransom by which the transom may be opened or closed.Tubular Lock (or Latch): A type of bored lockTumbler: A guard or obstruction that pre vents operation of a bolt exceptby insertion of the proper keyTurn Piece: A small knob, lever or tee turn with spindle attached foroperating the deadbolt of a lock or a mortise bolt.Two-Point Latch: A device sometimes required on three-hour fire doorsto lock the inactive leaf of a pair of doors at top and bottom.UUnit Lock: See Preassembled Lock.Universal: A term used to describe a lock, a door closer or other devicethat can be used on doors of any hand without change.VVertical Spring Pivot Hinge: A spring hinge mortised into the heel ofa door and fastened to the floor and head with pivots.WWard: An obstruction projecting from the lock case of side of a keyholeintended to prevent entrance or rotation of an improperly cut key.Gloss-4Price Book 72AEffective July 18, 2011 • Rev. 7/11

Ingersoll Rand's Security Technologies Sector is a leading global provider of products and services that make environments safe, secureand productive. The sector's market-leading products include electronic and biometric access-control systems; time-and-attendanceand personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steeldoors and frames; and other technologies and services for global security markets.877.671.7011 www.schlage.com www.ingersollrand.com© 2011 Ingersoll Rand SC-2008 Rev. 7/11 Printed in U.S.A.