Operator Manual
Operator Manual
Operator Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operation067903-004R1 LX Series Work PlatformEMERGENCY LOWERINGSERIAL # 4022 TO 4274The Emergency LoweringControl is located at the rearof the machine at the base ofthe elevating assembly.1. Open the Emergency LoweringValve by pulling onthe knob and holding it.2. Once the platform is fullylowered, release the knobto close the valve.Figure 4:LX31 AND LX41, SERIAL # 4275 TO CURRENTThe Emergency Lowering Control Knob islocated at the rear of the machine at thebase of the elevating assembly.1. Open the Emergency Lowering Valve bypulling on the knob and holding it.2. Once the platform is fully lowered,release the knob to close the valve.Figure 5: Emergency Lowering Knob, LX31 and LX41LX50, SERIAL # 4275 TO CURRENTThe Emergency Lowering Control Switch islocated at the rear of the machine at thebase of the elevating assembly.1. Open the Emergency Lowering Valve bypusshing down on the toggle switch andholding it.2. Once the platform is fully lowered,release the toggle switch to close thevalve.Figure 6: Emergency Lowering switch, LX50<strong>Operator</strong> <strong>Manual</strong> Page 9