aqueous cleaners - Industrial and Bearing Supplies

mold releasesGeneral PurposeSilicone Mold ReleaseA general purpose mold release used for a variety ofapplications including injection molding, compressionmolding, blow molding, and extruding. Provides fast andeasy part removal from molds.• Multiple part releases per application• Ideal for use on cold and hot molds• Medium duty silicone content (3.5%)• Non-staining, non-corrosive and fast drying• Effective temperature range (35°F to 600°F)• Meets FDA Regulation 21 CFR 175.300(release agent)Part Container UnitsNumber Size Per Case03300 16 oz aerosol 12Food Grade SiliconeMold ReleaseFormulated to be used for light duty applications.Contains the same high-quality ingredients as ourGeneral Purpose Silicone Mold Release.• Light duty silicone content (3%)• Colorless, odorless, non-staining, non-corrosive• Contains no CFCs, ODCs or chlorinatedsolvents• Long lasting lubrication helps produce moreparts in less time• Meets FDA Regulation 21 CFR 175.300(release agent)Part Container UnitsNumber Size Per Case03301 16 oz aerosol 12Heavy Duty SiliconeMold ReleaseSuperior lubrication that provides maximum releases.Formulated for difficult to remove molded parts.• Heavy-duty silicone content (5%)• Efficient, economical and effective for fastermolding• Colorless, odorless, non-staining, non-corrosive• Helps avoid mold build-up• Effective temperature range (up to 600°F)• Meets FDA Regulation 21 CFR 175.300(release agent)Part Container UnitsNumber Size Per Case03302 16 oz aerosol 12Lecithin Mold ReleaseNon-silicone mold release helps assure multiple releasesand will not interfere with parts to be painted, bonded,heat sealed or laminated. Lecithin Mold Release impartsa smooth dry, non-toxic film.• Vegetable-based lecithin is a non-silicone, foodapproved release• No special cleaning required before partdecoration• Long lasting mold lubrication and fast, easypart removal• Colorless, odorless, non-staining andnon-corrosive• Meets FDA Regulation 21 CFR 175.300(release agent)Part Container UnitsNumber Size Per Case03306 16 oz aerosol 12Boron Nitride MoldReleaseIdeal when working with the latest high temperature resins.It is also an excellent release for die-casting of lowmelting point metals such as lead, zinc and aluminum.• Forms a non-reacting layer with molten metals,salts, fluxes and slags• Protects surfaces and MIG/MAG weldingnozzles from weld spatter• High electrical resistance and thermalconductivityPart Container UnitsNumber Size Per Case03310* 16 oz aerosol 12Heavy Duty MoldCleanerSafety-solvent designed to quickly dissolve and removesilicone, grease, oil and residue on mold surfaces. Fastevaporating formulation is ideal for cleaning cold molds.• Evaporates quickly and leaves no residue• Non-flammable, chemically stable, nonconductiveand non-corrosive• VOC exempt and contains no known OzoneDepleting ChemicalsPart Container UnitsNumber Size Per Case03315 16 oz aerosol 12* This product is labeled extremely flammable. Read and observe the special usage warning on the label. Do not apply while equipment is energized.54 Customer Service: (800) 272-4620 • Technical Assistance: (800) 521-3168 More product information a click away at www.crcindustries.com/ei