CATALOGUE

CATALOGUE 2008INDEXIntroduction 2Graphic Index 4Alphabetical Index 6Reference Index 81 Wrenches 132 Torque tools 353 Sockets, accessories and sets 514 Bench vices 595 Pipe tools 976 Screwdrivers and bits 1037 Striking tools 1098 Pliers, pincers and bolt cutters 1299 Pulling tools 13910 Cutting tools, measuring tools 15911 Tool presentations anddisplay units 16912 Air tools 17313 Workshop tools, equipment 18914 Tool presentations and display units 263

1Page 13 - 342Page 35 - 503Page 51 - 584Page 59 - 965Page 97 - 1026Page 103 - 1087Page 109 - 1288Page 129 - 1389Page 139 - 158

Page 159-16810Page 169-17211Page 173-18812Page 189-26213Page 191-195Page 196-214Page 215-228Page 229-231Page 232-252Page 253-262Page 263-27014

1ALPHABETICAL INDEX, INDUSTRIAL TOOLS234567891011121314ABCD5 point keysAbrasive wheelsAdjustable wrenchesAir pullerAngular gaugesAxial gripsBall joint separatorsBattery toolsBearing extractorsBearing separatorBench viceBit holder 1/4"Bits 1/4"Bits 10 mm.Bits 5/6"Body shop hammersBody shop holderBody shop leversBody shop scrapersBody shop toolsBolt cuttersBoostersBorescopeBoxes for toolsBrake bleederBrake liquid testerBrake toolsCable cutterCable strippersCamshaft toolsCape chiselsCar boostersCar protectorCarpenters´pincersCement layer pincersChain cutterChain pipe viceCirclip pliersClutch alignerClutch toolsCodes protectorCold chiselsCombination pliersCombination wrenchesCooling liquid testerCooling system testerCooling system toolsCranesCrowfoot adjustable wrenchCrowfoot wrenchesCutting pliers for plasticCylinder head toolsDiagonal cutting nippersDiesel compression meterDiesel compression meterDiesel plug toolsDiesel plug torque wrenchDiesel timing lightDisk holderDisplay unitsDisplaysDolliesDouble end offset socket wrenchesDrillsDrive line toolsElectricians scissorsPage23718637261-262244153,257226205164164981121239412725326025525625315520521021218219218-220156145, 230242130206212147147201105146249249231130, 1321414124824624619343-23542-43144244143233233197-198198234176264270254-25547177226156EFGHIJKLMElectricity toolsElectronic circuit protectorEngine booster chargerEngine locking and timing toolsEngine oil pressure testerEngine toolsEngraving penExhaust smoke extractorExhaust toolsFile blade holderFilesFlare nut wrenchesFlat long nose plierFlat nose pliersFlat ring wrenchFlat tip screw driversForged double end socket wrenchesGasket cuttersGasoline compression meterGasoline timing lightGasoline, compression meterGauge setsGrease gunsGreasersGrindersHacksaw bladesHacksawsHalf moon wrenchHammer handlesHammersHeavy duty wrenchesHexagonal key wrenches in plastic holdersHinged pipe viceHook wrenchesHose clamp pliersHub extractorHydraulic pressImpact hub pullerImpact screwdriverImpact sockets and accessories 1"Impact sockets and accessories 1.1/2"Impact sockets and accessories 1/2"Impact sockets and accessories 3/4"Impact sockets and accessories 3/8"Impact wrenches 1"Impact wrenches 1/2"Impact wrenches 3/4"Impact wrenches 3/8"Injection circuit and pump toolsInjection pump timing toolsInjection pumps timing kitInjector socketsInsulated screwdriversInterchangeable heads for torque wrenchesJack standsJacksKnivesLiftingLight testerLubricationLubricatorMagnetic pick-up toolMagnetic traysMeasuring tapesMechanical pullersMini bolt cuttersPage22923120523823423218321320825613543142141431104810623323423317221121117617117044134133174119-12210545248215191215126878982858017517417517423523823823511554194193-195192156213211186167210171-1721611554

ALPHABETICAL INDEX, INDUSTRIAL TOOLS1NOPQRSMini die grinderModular systemModular trays with toolsModular trays without toolsMultiple pullersNut driversNut spliterOffset hex keys wrenchesOffset ring wrenchOil cansOil chage toolsOil filter toolsOil filter wrenchesOil plug bit setOil plug wrenchesOpen end wrenchesOxigen sensor socketsOxigen sensor testerPaint scrapersParallel pin punchesPhillips screwdriversPipe cuttersPipe cutting pliersPipe toolsPipe wrenchesPiston ring groove cleanerPiston ring tightenerPiston ring tongPiston toolsPliers for brake springsPliers for pistonsPneumatic cut off toolsPneumatic filtersPneumatic hammersPneumatic hose reelsPneumatic ratchetsPneumatic regulatorsPneumatic rivetersPneumatic toolsPolishersPullers, spare partsQuick connectorsRatcheting combination wrenchesRatcheting wrenchesRatchetsReciprocating sawRefractometer for liquidsRefrigerating circuit leak detectorRivetersRound nose pliersRubber malletSandersScrew clampsScribersSelf grip pliersSheet metal punchesSheet toolsShock absorber compressorsSilicon applicatorSingle open end wrenchSlugging ring wrenchSlugging wrenchesSnipe nose pliersSocket wrenchesSockets and accessories 1"Sockets and accessories 1.1/2"Page17627253316348,11216711639211199198200203202382082331061301111052491041042452452452452202451801861821851811861811741791681854241-42,4462-66-71-76180233247259142134178102132149167253221183454646142607968TUVWSockets and accessories 1/2"Sockets and accessories 3/4"Sockets and accessories 3/8"Sockets for wheelsSockets with bitsSpanish hammersSpark plug pliersSpark plug toolsSpark plug torque wrenchesSpark plug wrenchesSpecial pullers for carsSpecial retaining ping pliersSpiral hosesSpoons (Body shop tools)Spray gunsStethoscopeStub setter and extractorSurface cleanerSuspension spring compressorSuspension toolsSwivel socket wrenchesT handle screwdriversTable viceTap wrenchesTaper punchesTensioning yoke pullerTerminal crimping pliersTesterThermometer for liquidsThermometer with laserTin snipsTool boxes with toolsTool cabinetsTool kitsTorque multipliersTorque toolsTorque wrenchesTORX flat wrenchTORX offset key wrenchesTORX screwdriversTrolleysTubular wrenchesTyre leverUniversal locking toolUpholstery pliersVacuum and blow gunValve spring compressorValve toolsVoltage testerWaterpump pliersWelding self grip pliersWheel toolsWheel wrenchesWindscreen toolsWinscreen suction cupsWire strippersWork benchesWork shop panelsWorkshop accesoriesWorkshop compositionsWorkshop creeperWorkshop equipmentWorkshop lampsWorkshop self grip pliersPage60756421790-93134197196196196215,226,241,258147185255184232166,24118222222149114101167131162229117232210157201416565253-554412111221-2548217240258183242,243242116,2311481542152162601841431421420918-20,25-26212172092012345678910111213145

1REFERENCE INDEX234567891011121314REF.00100501001101501601801902002102302402502602802903003103203304004104204504604704804905005105205505605806006100611061206130615061610616206163061650616606167061680616906170620062106220623062506260627Page37, 43, 235, 27037, 27038, 2703839, 2703941, 4241, 42, 44434342, 434140, 270, 274404444, 4546464645118118, 119114119118, 11912012012047474748, 27048222, 225200, 201243245245220242, 245, 248220, 243244220258243, 258217, 243243243247202202203203211211211REF.062806290630640650661066206630670680700720730751011021031041051061071091121131151171190119111921193119411951196119712112212312412512612712901291129312941295129612971298131132135139141145149Page211205, 248196, 19749216, 217210217208, 230, 24853, 55, 565653545424460, 270606023761, 62, 114, 27061, 909060, 62, 63, 6664, 656465, 669167676765, 91, 1141146464, 676768, 270681966869, 70, 71, 270696972, 7372, 7372, 73, 7472, 73, 7472, 73, 7430686875, 2287575, 76777878, 7979REF.160161162163166167168169170172173174175176177178179180183184185190191192201202206207216217255256302303304307315317321324330332333401405407408409413414415417418419427429Page818181818382, 2178283, 84838685858688878788, 899293, 2449293, 24449, 11249, 11449981001009999101102102104104104104105105105105106106106111116110110, 11111111111211248, 112115115116117, 231REF.452453454457458459460461470471472475476501502503504505506511512513514515516517518519521522523525529530531532534535536540546600601602604608609612613621622623624625626629Page237121122120116, 121113, 115, 11611412294, 126, 20395, 12794111, 123, 124, 125237130132132130130130130, 132130131131131131132132131133133133133134134253, 254254, 255135, 136, 137, 25625625610625921141, 145, 147, 270141141, 270142142142, 270143146147, 227144143143144145, 230REF.6306316326346410641164126413641464156416641764186419645650651655658661664701705706707708709710711713714715716717718720721730740796801803902903905906907908910011910021910051910061910081910181910191Page116, 229, 230, 231147147148149,150,201150, 151, 152, 201, 208149-152, 208, 220, 256149, 150, 153, 257151, 256, 257149,150,151,153149, 257256151,256151154155155156, 230157, 158156156, 270160161161, 162162215164164, 165165163208, 226166166166167167, 210137, 197, 205, 220167167163170, 1711712114, 15, 16, 172122, 2326 - 3327 - 3274, 266101, 269160, 269155, 26977, 266145, 268113, 2676

REFERENCE INDEX1REF.9102Page265REF.ELP30Page206, 207, 209REF.P701Page181REF.ST1020Page218REF.ZG12Page22029103264, 265, 266, 267ELP31209P704174ST1030233ZG20220, 227910401115, 267ELP32206, 209P799183ST1040233ZG3079201910411910421910431113, 267266152, 265ELP35ELP862EPR235206207241P800P801P802174174175ST2010ST3010ST4010204204204ZG3621ZG3933ZG395226208247, 2483910461115, 267ERV100225P803S174ST7030231ZG397236910471910481910491910641267113, 267113, 267125, 268ETRFRFREGAF258247, 248, 250, 251, 252219, 248197P804SP805SP806SP807S181177180176SUP02T49TDCTLVC260244238251, 252ZG3997ZG4108ZG4118ZG41262412362362084910651125, 268GE1000192P808175TMS106225ZG414257, 2599106819107219107514174, 266153, 269GFFGMFLMT102219225192P809P810PA03179179247V06VEVID02204195203ZG4176ZG4182ZG4199235196248591076177, 266LS234PBG184VID04203ZG422420891080174, 266MO215PBK30184WIN214ZG4268256910821910881910891160, 269145, 268145, 268NINR-1P10124953181PBSC156PBUPC1184184219WXNYZL11Z0101214, 215235203ZG4280ZG44ZG4415255258241691090133, 264P107K182PDB196Z0110218, 227ZG51321691107120P108K182PEC1903187Z0112260ZG5352197911081911171911181182519P109P110P115176180176PH10PM01PM4185185, 228180, 182, 186Z0113Z0309Z0401227225199, 236ZG85ZGDC16ZH1226, 227247197, 210, 241791119118P116176PM50185Z0403228ZH4232980981990A180171, 172172245195P117P121MAP125P127176177181182PM51PM5248PN010PN15004185185183177Z12Z15000Z2002Z2003227156200200ZH5ZH6ZH7ZH8210232216, 218, 246, 2582108BCT100196P144175PN20510180Z23239, 240ZHV100210BCT150BHBO04BPR198253, 254, 255196196, 198P150MAP153P157MAP204177177177179PN21201PN234PN251PN30179180186184Z260Z3041Z3110Z3300M12201243242198ZK100ZK113ZK141ZK1482412412161989BV204P209178PN76217Z334198ZKJ259CBCD300CE25194233233P212P215P218179183183PNSPNVPR184202191Z404BZ420Z4332233205240ZL04ZL05ZL1123221223510CF198, 199P219183RAT64, 68Z4355241ZL20213, 236CH193, 194, 212P231177RBR226Z4361242ZL22209CJ01FCPDCS260238221, 223, 225P233P234P254184180186REP01RET1RI218228, 242, 249246Z4400Z4440Z4494238240234ZL23ZL24ZL423621320911CXW200P255186RMM249Z4500240ZL81232DRZ246P265180RPF150235Z4650240ZLF2030233DV01E107E108210195195P277KP404P405181175175RSRT10RWI23215196Z534Z541Z620260260205ZMZRZS37185, 209191, 210, 218, 219233, 246, 24712E14192P42186RWS196ZB3050205ZS4235, 237ECBEL32ELP12AELP18195230231206, 207P43P500P511P601186185178178RWURWYRXDRXONM246246242244ZB700ZC2331ZC3000ZFBH260261262233ZS5533ZT5000ZW3201ZWB24321326120913ELP2206, 231P610178ST1010204ZG04248ZWS261, 262147

safety instructionsThis chapter contains important safety and operating instructions.Sometimes tools are not used for the specific purpose for whichthey were designed, with the following results:safety instructionsA quality job is not guaranteed.Tools can be damaged.The user can be injured.Remember these rules:Use quality tools.Use the right tool.Renew worn-out or damaged toolsUse goggles. Renew tools in a poor condition.IRIMO manufacture tools according to ISO, UNE and DIN regulations. These regulations ensure that tools are safe for the purpose theywere designed for. Buying tools that comply with international regulations is the best guarantee against accidents.SPANNERS90°Wherever possible align spanners and head ofscrews for better tightening. It will mean longerlife and less damage to head of screws.Do not use hammers with standard spanners.Impact wrenches have been specificallydesigned for this use.SPANNERS AND SOCKETSDo not use lever extensions. Pull rather thanpush. Try to keep your balance. Ring spannersare recommended for high torque.Always use correct wrenches or socketsizes for screw-heads. Check state ofscrews and tools before starting the job.IMPACT SOCKETSDo not grab sockets oraccessories duringrotationMake sure that impact sockets arecorrectly fixed to power nut runnersby means of pins or safety rings.Do not use hand sockets with impactdrivers or power tools.Wear safety gogglesand gloves.8

1000Vsafety instructionsSCREWDRIVERSDo not use screwdrivers whilst holdingthe piece of work in your hand; place iton a solid surface so that your hand is ata safe distance.If screwdriver tips are thinner than the slots of the screws, both the screwsand screwdrivers might bend. On the other hand, if they are thicker donot force tip in, as it will not get in deep enough and will jump out of placewhen tightening. This also applies to Philips and Pozidriv where thedimensions of screw and tip must be the same.If your screwdriver tip is smaller than the slot of the screw, you are notusing the maximum tightening capacity of the screwdriver. If, on thecontrary it is wider, you will not be able to fully tighten the screw. Useentire tip surface when tightening.For optimum tightening performance,use correct tip.Use insulated screwdrivers for live working.PLIERSWear safety goggles (user and bystander)specially when cutting wire and fittingcirclips or rivetsDo not hit pliers with ahammer.Always use insulated pliers when workingwith live components1000VUse pliers with correct ringdiameters onlyBENCH VICESDo not use extensions orhammers to tighten vices.Clean vices periodically,including guides and housings.9

safety instructionsBENCH VICESDo not hit material while withinthe jaws, there is a specificallydesignedtool for this purpose..Fix vices firmly and securely to a firmtable of appropriate thickness or abench.FILESTO FIT HANDLES TO FILESDo not work with files without ahandle. Fix file body toa bench vice.Press file on tohandle.Hold file firmly and strike gently with a woodenhammer.HAMMERSHit evenly.Do not use hammers with parts withhardness greater than 46Hrc. For greaterhardness use a mallet.> 46 HRC > 46 HRCHold hammers firmly by thehandle.Hammers with wooden handles must be conveniently stored.Check state of handle before use.Do not use hammers to hit hammers. Do not hit with side of hammer.Do not use worn-out hammers. Chipped, mushroomed or crackedhammers can cause flying10

safety instructionsCHISELSPlace chisels so that you mayproperly see object beingworked on.Wear safetygoggles.Use tools of appropriate size and shapewhen hitting chisels.The chisel point has a 50/58 Hrchardness, under no circumstancesshould it be used with materials ofa hardness greater than 40Hrc.> 40 HRC< 40 HRCChange chiselif worn out.Hold tool correctly.CUTTING TOOLSDo not place hands in front ofthe tool.Always point cutting edgeoutwards.Protect points oftools when storingthem.11

This Catalogue replaces all previous editions.The reproduction rights are reserved for all countries, any total or partial reproduction can not be made without theauthorisation of SNA Europe.SNA Europe, reserves all rights to modify all its models and specifications, as well as to introduce changes and improvementswithout prior notice.This information does not imply to contractual compromise. SNA Europe, does not assume responsability for possibletypographic mistakes on this catalogue.The instructions for use do not substitute the rules and/or professional and national laws in force.TORX® is to registered trademark of Comcar division of Textron Inc. PHILLIPS and POZIDRIV are registered trademarks of PHILLIPS SCREW Co.XNZ is to registered trademark of BAUER SCHAULTE.12

123456781 COMPOSITIONSAND WORKSHOPEQUIPMENT910Ref. 903.211page 14Ref. 902.011page 2111Ref. 911.081page 18Ref. 906.131page 2212Ref. 911.181page 19MODU SYSTEMpage 241314

1WORK BENCH AND TOOL CABINET WHIT TOOLS23456789REF.903.211Contentskg.124 Pcs.216Same contents as 903.161 +:• Workshop bench 1.850 x 800 x 880• Bench vice, square guide, FCP-12510Lp11Hh121314L=1.850P=800h=880H=1.780p=170WORK BENCH AND CABINET WITHOUT TOOLSREF.903.111- Board and legs in2 mm. steel sheet- Epoxy painting- Solid construction- Reinforcing beams- Double drawer guidesSizes1.850 x 800 x 1.780Pkg.18514

TOOL CABINET, WITH TOOLS123456TOOL CABINET WITH BLINDER WITHOUT TOOLSREF.903.061Sizes1.850 x 170 x 900kg.50Lp78HREF.903.161REF.Contents122 Pcs.Nº Pcs.kg.69DescriptionREF.L=1.850H=900p=170Nº Pcs.- Board and legs in 2 mm. steel sheet- Epoxy painting- Solid construction- Reinforcing beams- Double drawer guidesDescription910001010015045048055121125125125125401401429407408409115131098202111111222Irimo adjustable wrench 5/8"Double open end wrench: 4-5, 6-7, 8-9, 10-11, 12-13, 14-15,16-17,18-19, 20-22, 21-23, 24-26, 24-27, 25-28, 27-29, 30-32Offset ring spanner: 6-7, 8-9, 10-11, 12-13, 14-15,16-17, 18-19, 20-22, 21-23, 24-26, 25-28, 27-29, 30-32Hex key wrench (black finished):2 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10Ball point hex key wrench:1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 (9 wrenches)Double forged tubular wrench set: 6-7, 8-9, 10-11,12-13, 14-15, 16-17, 18-19, 20-22 (8 wrenches)Socket wrenches #1/2", hexagonal: 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32.1/2" Deep socket, 125 mm and 250 mm1/2" Sliding handle1/2" Universal joint1/2" Reversible ratchet, 250 mmStubby screwdriver, 1,2 x 6,5 x 25 mmScrewdrivers PH2, 6x25Voltage tester 100-250 V., 3,5x100Forged screwdriver 1,2x6,5x125 - 1,2x8x175Screwdriver protected shank0,5x3x100 and 0,8x5x125Screwdrivers, PH1 5x80 and PH2 6x100458501505511513515521529534534534601621621624634641661801903980821222111111111111111Torx® knife set: T9, T10, T15, T20, T25,T27, T30, T40. (8 wrenches)Cold chisel 150 mm and 200 mmCape chisel 150 mmCentre punch 2,5 and 8 mmNail punches 3 and 6 mmParallel pin punches 3 and 10 mmBall Pein hammer model C, 450 grs.Soft face hammer Ø =35 mm8" Flat file8" Half round file8" Square fileFlat universal plier 180 mm, pvc handleCirclip Seeger plier, straight internal, 180 mm, 19-60Circlip Seeger plier, straight external, 180 mm, 19-60Wire cut diagonal plier 150 mm, pvcGroove joint waterpump plier, 250 mm, pvcCurved cutting grip, 250 mm.Electrician’s scissors, 125 mm, pcv.Hacksaw frame, nº 3Wall cabinet 1.850 x 170 x 900Standard measure tape, 2 m1112131415

12 DOOR TOOL CABINET WITH TOOLS2345LL=600P=220H=1.00067891011121314REF.903.261REF.001010015046048121125125.081125.051125.501401401407418408409511.061513.061517.061521.031529.171601604.161608.161612.191613.191621624634.101641.031641.321661.051801.031903.071980.391Nº Pcs.315101092021111142221111121111221111111Contents106 Pcs.kg.45DescriptionHeavy duty adjustable wrenches 3/8", 1/2" and 5/8"Open end wrenches: 4-5, 6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22, 21-23, 24-26, 24-27, 25-28, 27-29, 30-32Offset ring wrenches: 6-7, 8-9, 10-11, 12-13, 14-15,16-17, 18-19, 20-22, 21-23, 24-26Hex key wrenches (black finish):2 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10Ballpoint hex wrench set:1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 (9 keys)1/2" Socket wrenches, hexagonal: 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32.1/2" Extension bars, 125 mm and 250 mm1/2" Sliding “T” handle1/2" Universal joint1/2" Reversible ratchet, 250 mmEngineers’s stubby screwdriver, 1,2 x 6,5 x 40 mmPhillips stubby screwdriver PH2, 6x40Engineers’ flared tip screwdriver: 5,5x1256,5x150, 8x175 and 10x200 1000 V, 0,5x3x100 and 1x5x125Electricians’ screwdrivers parallel tip, 1000 V,0,5x3x100 and 1x5x125Electricians´ screwdrivers 0,8x4x100 and 0,8x5x125Phillips screwdrivers PH-1x100 and PH-2x125Phillips screwdrivers, PH1 5x100 and PH2 6x125Centre punch 6 mmTaper punch 6 mmParallel pin punch, long series 6 mmBall pein hammer C, 450 grs.Nylon faced hammer Ø =35 mmCombination pliers, 160 and 180 mm, PVC handlesFlat nose plier, 160 mm PVCRound nose plier, 140 mm PVCSnipe nose plier, straight jaws, 200 mm PVCSnipe nose plier, bent jaws 200 mm, PVC handlesInternal circlip plier, straight, 180 mm, 19-60External circlip plier, straight, 125 and 250 mm, PVC handlesDiagonal cutting nippers, 190 mm, PVCGroove joint waterpump plier, 235 mm.Self grip plier, straight jaws, 250 mm.Self grip plier, round jaws, 130 mm, PVCHacksaw, pistol grip handle, nº 32 Door tool cabinet 600 x 220 x 1.000Steel tape, 3 m2 DOOR TOOL CABINET WITHOUT TOOLSREF.Sizes903.071600 x 220 x 1.000REF.903.081903.091Hkg.27ALUMINIUM SHUTTERWALL CABINETSizes (mm)1.500 x 155 x 9151.850 x 155 x 915kg.4043P- 1 mm. steel sheet- Epoxy painting- Double sheet doors- Double pin- Safety lockNew housing cabinet with a very light alu shutterAlu guides makes opening/ closing of the shutter very easy thanks also to the plasticparts included in the area of frictionPunched holes in back side for easy and safe hangingComplete set of 25 tool holdersSafety locking system with 2 keys16

WORK BENCH WITHOUT TOOLS123REF.SizesSteel thickness 2mm.Reinforced with profiles.Epoxy Painting.1 key for all drawerskg.REF.SizesSteel thickness 2mm.Reinforced with profiles.Epoxy Painting.kg.4903.0111.850 x 800 x 880135903.3711.850 x 800 x 88097WORK BENCH WITHCABINETWORKSHOP BENCH567REF.903.381903.391Sizes (mm)1.850 x 800 x 1.7801.850 x 800 x 1.795ShutterMetallicAluminiumkg.185178Steel thickness2mm.Reinforced withprofiles.Epoxy Painting.Steel thickness 1,5mm.Reinforced with profiles.Epoxy Painting.REF.903.031903.041903.051Sizes1250x700x8801500x700x8801750x700x880Drawers112Kg.9010512589WORKSHOP BENCH WITH TOOL PANEL1011Bench steel thickness 1,5mm.Panel steel thickness 1,5mm.Reinforced with profiles.Epoxy painting.Key lock.12REF.SizesDrawersKg.13903.131903.141903.1511250x700x16301500x700x16301750x700x16301121011181401417

1WORKSHOP COMPOSITIONS234567REF.911.081COMPOSITIONContents91 Pcs.kg.16REF.001.041010015028048063065.021129.031167401429.101407408.031409458.071501511.051517521.031529.171601.471612.261621625.551626.061634.101Nº Pcs.1128392113+5221412721611112111DescriptionHeavy duty adjustable wrench 5/8”-10”Open end wrench: 6-7/27-32Offset ring wrench:6-7/20-22Half moon wrench 11-13, 14-17, 19-22Ballpoint, long hex key wrench:1,5/10Spark plug wrench Nº 3 (400x21) -Nº7 (300x16)Wheel nut wrench17-19-22-1/2”1/2" Socket set, hexagonal: 2121/2” Impact socket 17R-19RStubby screwdriver 1,2x6,5x25 mm -PH2 6x25 mmVoltaje tester 6-24V / 0,5x3x55Engineers’ screwdriver: 4x100-5,5x125-6,5x150-8x175Electricians’ screwdriver 0,5x3x100Phillips, PH1 5x100 - PH2 6x125Torx® key wrench set T10/T40Cold chisel 150 mm - 200 mmRound centre punch 5 mmLong round pin punch long series 2 - 8 mmBall pein hammer C-450 grs.Nylon faced hammer Ø = 35 mmCombination plier180 mm (Chromed)Snipe nose plier 160 mm (Chromed)Internal circlip plier180 nn - 19-60High leverage diagonal cutting plier 180 mm (PVC)End cutting plier 160 mm (PVC)Groove joint waterpump plier 250 mm (PVC)89BODY SHOP COMPOSITIONREF.010015046Nº Pcs.889DescriptionOpen end wrench: 6-7 / 20-22Offset ring wrench: 6-7 / 20-22Long hex. key wrench (black finished): 2 / 101011121314REF.911.191Contents84 Pcs.kg.18417191407408409458.071501.061502.091505.061511.041517531532532.221532.321534.001534.111536.011601.421625.551634.101641.321658.101661.051665337111133411114111111Nut driver 4-7 mmNut driver “T” handle 8-14 mmEngineers’ screwdriver: 5,5x125-6,5x150-8x17510x200 - 12x250Electricians’s screwdriver.3x75 - 4x100 - 5,5x125Phillips, PH1 5x100 -PH2 6x125 - PH3 8x150Torx® key wrenches set T10 / T40Cold chisel 150 mmExtraflat cold chisel 240 mmCape chisel 150 mmRound centre punch 4 mmLong round pin punch long series 4-5-6 mmBall pein hammer 531.23 - 531.30 - 531.33Dollies Nº 2-3-6-8Curved face medium spoonSpoon Nº 2Body shop file holder=355 mmCurved tooth file 12”Scrapers 50 - 80 -105 - 120Combination plier, 180 mm (Chromed)High leverage diagonal cutting plier 180 mm (PVC)Groove joint waterpump plier 250 mm (PVC)Round jaws grip plier, 235 mmTin snips, 250 (Dcha.)Electrician’s scissors, 130mm (PVC)18

WORKSHOP COMPOSITIONS1INDUSTRIAL VEHICLE TOOL COMPOSITION WITH TROLLEYREF.911.181Contents90 Pcs.kg.9923456REF.Nº Pcs.Description601.421625.551634.101511.081515.061515.081521.031529.031501.061501.081459.201016.181026.141129.031011.161046.021139.0111111111111612121881013Combination plier 180 mmHigh leverage diagonal cutting plier 180 mmGroove joint waterpump plier 250 mmRound centre punch 8 mmParallel pin punch 6 mmParallel pin punch 8 mmBall pein hammer “C”Nylon faced hammer 35”Cold chisel 150 mmCold chisel 200 mmScrewdrivers set 6 pcs.Offset ring wrench 6-7 to 30-32 mmCombination wrench 10 to 32 mm1/2” Socket sets 10 to 32 mmOpen end set 6-7 to 30-32 mmHex. key wrench set 2 to 12 mm3/4” Socket set 22 to 50 mm789906.1611Roller cabinet 3000 serie101112131419

1WORKSHOP COMPOSITIONS23WORKSHOP COMPOSITIONREF.Contentskg.45678AHBA=500B=210H=245- Epoxi painting911.071REF.001010015046122125125125125407409501505511517521602625634641801902Nº Pcs.18810132111213421112111111163 Pcs.15DescriptionHeavy duty adjustable wrench 5/8"Open end wrenches: 6-7, 8-9, 10-11, 12-13, 14-15,16-17, 18-19, 20-22Offset ring wrenches: 6-7, 8-9, 10-11, 12-13,14-15, 16-17, 18-19, 20-22Hex key wrenches set,1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 (9 keys)1/2" Socket wenches, hexagonal: 10, 11, 12,13, 14, 15, 17, 19, 22, 24, 27, 30, 32.1/2" Extension bars, 125 mm and 250 mm1/2" Sliding “T” handle1/2" Universal joint1/2" Reversible ratchet, 250 mmSocket rail 220 mm for 1/2" socketsClips for 1/2" socketsEngineers’ screwdrivers: 0,8x4x1001x5,5x125, 1,2x6,5x150 and 1,2x8x175Phillips screwdrivers, PH1 5x80 and PH2 6x100Cold chisel, 150 mmCape chisel, 150 mmCentre punch 4 mmParallel pin punches, long series, de 4 and 5 mmBall pein hammer C, 450 grs.Combination pliers, 160 mm PVCDiagonal cutting nipper, 180 mm PVCGroove joint waterpump plier, 250 mm, PVCSelf grip plier round jaws, 250 mm.Hacksaw, nº 11Tray tool box 500x210x245. Cód. 902.139101112131420

TOOL BOXES AND CARTS12343 TRAY TOOL BOX5 TRAY TOOL BOX5REF.DescriptionAxBxCkg.u.REF.DescriptionAxBxCkg.u.902.011902.021902.031N. 1N. 2N. 3300x210x190400x210x190500x210x1902,83,44,1111902.121902.131N. 12N. 13400x210x245500x210x2454,65,4116CAB7891011CADDIE 2REF.905.021FeaturesWheels Ø = 60 mmAxBxC650 x 400 x 540kg.22,2TWO SHELVES ROLL CARTREF.mm.60051800 x 410 x 910kg.18u.112• Not Assembly delivered• Two shelves of 760x400x75mm• 100mm Ø Swivel wheels; 2 with brake• Total weight capacity 150kg.13CAB1421

1MODULAR ROLLER CABINETS24000 SERIESACCESORIES 4000 SERIES (AND 1000 SERIES)3AC144AC105AC09678• 6 drawers with ball bearing slides.3 drawers 525x350x75 mm.2 drawers 525x350x115 mm.1 drawer 525x350x145 mm.• Anti-tip Security system: 2 or more drawers cannot beopened simultaneously.• Central locking• 2 fixed wheels 100 mm.• 2 revolving wheels 100 mm.• Rounded edges that avoid injuries.• ABS top with big work surface.• Plastic handle of great robustness.• Many accessories available.REF.906.171mm.730x450x920 (EXT.)Drawers6kg.54u.1AC12AC11REF.906171AC09906171AC10906171AC11906171AC12906171AC13906171AC14DescriptionTop extension with holder (Series 1.000)Support rollsWastebasket (Series 1.000)Small container holderBig container holder (Series 1.000)Support documentsAC139103000 SERIES111213• 5 drawers with maximun storage capacity. Ball slides.4 drawers of 525x440x80 mm.1 drawer of 525x440x240 mm.• 4 revolving wheels of 100 mm (1 with brake).• Anti-tip security system.• Central locking.• Wooden top.• Ergonomic plastic handle.REF.mm.Drawerskg.u.14906.161630x530x920 (ext)573122

MODULAR ROLLER CABINETS12000 SERIES2000 SERIESREF.RS2091RS2101RS2111DescriptionTop extension + holderHoldersWaste basket2RS2101RS209134RS21115REF.906.131mm.Drawers640x450x920 (ext) 55 drawers with ball bearings:2 drawers 525x350x65 mm.1 drawer 525x350x125 mm.1 drawer 525x350x155 mm.1 drawer 525x350x225 mm.2000 SERIES• Central blocking of drawers.• 2 fixed anti-tip wheels of 100 mm.• 2 revolving wheels (1 with brake) of 100 mm.• Flat corners, that avoid structural damage.• ABS work top with tool holding areas.• Resistant metal handle.1000 SERIESkg.60u.1REF.906.151906.151R500 SERIESmm.Drawers640x450x920 (ext) 66 drawers with ball bearing slides:3 drawers 525x350x65 mm.2 drawers 525x350x125 mm.1 drawer 525x350x180 mm.Same trolley inred colourkg.62u.167891011• 4 ball bearing sliding drawers that open from both sides3 drawers of 525x350x45 mm.1 drawer of 525x350x70 mm.• 1 large compartment for big tools525x350x330 mm.• 4 revolving wheels of 100 mm.• Flat corners that avoid injuries.• Central locking of drawers.• ABS workshop.• Accesories available (see previous page).• 2 sliding compartments with rubber worktop. Max. weight percompartment when open: 50 kg.• 1 sliding tray inside.Max. weight: 20 kg.• 2 fixed wheels of 100 mm.• 2 revolving wheels (1 with brake) of 100 mm.• Protected on outside against impact.• Blue cataphoresis paint.• Top locking with key.• User friendly plastic handle.1213REF.mm.Drawerskg.u.REF.mm.kg.u.906.141700x450x910 (ext)4461906.351810x525x8405211423

1MODU SYSTEM23456789101112131424T2T3How toadapt theSPACE REVOLUTIONA new concept in storage modules offering numerous advantages:87 x 174 mm.87 x 261 mm.174 x 261 mm.T6T2T3T6to the trolleys?Maximum storage capacityGreater number of storage trays per drawerMultiple possibilities for tool storageMaximum usage of storage tray surface areaAdaptable to the majority of trolleys in the marketTT10T8For IRIMO trolley drawers1000, 2000 y 4000similar sizes to other brands525x350 mm.T6T6T6T6T6 T6 T6T3T6 T6T2 T2T6T2T8T8T8T3T8T8T8174 x 435 mm.174 x 348 mm.With the MODU System, achievemaximum benefits from tool storage to.Your own personalSATISFACTION!T10The MODU System allows tool storage with the maximum of order and no waste of spaceT8For IRIMO trolley drawers3000525x435 mm.T6 T6 T6T6T6 T6T8T6 T6T8T6T2T6T2T8T2T8 T8 T8T3T3

WORKSHOP COMPOSITIONS123456APPRENTICE TOOL COMPOSITIONREF.Contents911.17173 Pcs.kg.557REF.907.001907.241907.421907.321907.031907.511907.831046.281Nº Pcs.821931399DescriptionOpen end wrench set 6-7 to 20-22 mm1/2” Socket set hex. 8-32 mmScrewdrivers’ setPlier setCombination wrench set 7-19 mmStriking tool setStorage tray setHex. key wrench set 1.5 to 10 mmModuleT-6T-8T-8T-6T-6T-82 T-389906.1411Roller cabinet 1000 series101112131425

1BASIC COMPOSITION 69Pcs IN TRAYS ABSCOMPOSITION 122Pcs IN TRAYS ABS2345FILLS 2 DRAWERS IN TROLLEYS 1000, 2000 AND 4000 SERIES.REF.907.961907.001907.031907.101907.271907.301907.421907.521Trays78 open end wrench 6 to 22 mm.13 combination wrenches 7 to 19 mm.6 forged socket wrench 8 to 19 mm.socket sets 1/2 - 21 pcs.3 pliers9 screwdrivers9 striking toolsKg.9,2COMPOSITION 138Pcs IN TRAYS ABSFILLS 3 DRAWERS IN TROLLEYS 1000, 2000 AND 4000 SERIES.REF.907.901907.001907.031907.061907.211907.241907.301907.421907.431907.511907.821907.841Trays98 open end wrenches 6 to 22 mm.13 combination wrenches 7 to 19 mm.6 offset ring wrenches 6 to 17 mm.socket sets 1/4 - 45 pcs.socket sets 1/2 - 21 pcs.3 pliers9 screwdrivers7 torx screwdrivers9 striking tools3 empty modules T22 module T3 + 1 empty module T2Kg.9,0COMPOSITION 164Pcs IN TRAYS ABS678910FILLS 4 DRAWERS IN TROLLEYS 1000, 2000 AND 4.000 SERIES.REF.907.911907.001907.011907.031907.061907.071907.101907.211907.241907.311907.321907.421907.431907.511907.821907.831Trays138 open end wrenches 6 to 22 mm.3 open end wrenches 21 to 32 mm.13 combination wrenches 7 to 19 mm.6 offset ring wrenches 6 to 17 mm.4 offset ring wrenches 18 to 30 mm.6 forged socket wrench 8 to 19 mm.Socket sets 1/4” - 45 pcs.Socket sets 1/2” - 21 pcs.2 pliers and 1 grip plier2 pliers and 1 tweezer9 screwdrivers7 Torx screwdrivers9 Striking tools3 empty modules T22 empty modules T3Kg.14,2COMPOSITION 130Pcs IN TRAYS ABSFILLS 4 DRAWERS IN TROLLEYS 1000, 2000 AND 4.000 SERIES.REF.907.941907.001907.011907.031907.101907.151907.211907.271907.301907.421907.431907.511907.631907.751907.821Trays138 open end wrenches 6 to 22 mm.3 open end wrenches 21 to 32 mm.13 combination wrenches 7 to 19 mm.6 offset ring wrenches 8 to 19 mm.6 forget socket wrench 21 to 32 mm.Socket sets 1/4” - 45 pcs.Socket sets 1/2” - 21 pcs.3 Pliers9 screwdrivers7 Torx screwdrivers9 Striking toolsTorx sockets and bits - 25 pcs.9 oil filter tools3 empty modules T2Kg.18,0BODY COMPOSITION98 Pcs IN TRAYS ABS11121314FOR TROLLEY 3000 SERIES.REF.907.931907.001907.011907.031907.061907.071907.101907.211907.241907.311907.321907.421907.511907.841Trays128 open end wrenches 6 to 22 mm.3 open end wrenches 21 to 32 mm.13 combination wrenches 7 to 19 mm.6 offset ring wrenches 6 to 17 mm.4 offset ring wrenches 18 to 30 mm.6 forged socket wrench 8 to 19 mm.Socket sets 1/4” - 45 pcs.Socket sets 1/2” - 21 pcs.2 pliers and 1grip plier2 pliers and 1 tweezer9 screwdrivers9 striking tools2 module T3 + 1 empty module T2Kg.13,5FILLS 3 DRAWERS IN TROLLEYS 1000, 2000 AND 4.000 SERIES.REF.907.951907.001907.011907.061907.071907.141907.211907.311907.321907.701907.711907.821Trays108 open end wrenches 6 to 22 mm.3 open end wrenches 21 to 32 mm.6 offset ring wrenches 6 to 17 mm.4 offset ring wrenches 18 to 30 mm.7 articulated keys 6 to 19 mm.Socket sets 1/4 - 45 pcs.2 pliers and 1 grip plier2 pliers and 1 tweezer4 dolliers, 1 bumping blade, 1 Microgrip plier2 hammers and 4 Microgrips3 empty modules T2Kg.16,026

MODULAR TOOL TRAYS12MODULE 00REF.907.001908.031Nº Pcs.86-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-22T6MODULE 11&12REF.907.111907.121908.071Nº Pcs.108, 10, 11, 12, 13, 14, 16, 17,18, 1998, 9, 10, 11, 12, 13, 14, 15, 16T8345MODULE 01REF.907.011908.011Nº Pcs.321-23, 24-27, 30-32T8MODULE 13REF.907.131908.251Nº Pcs.617,18, 19, 21, 22, 24T1067MODULE 02REF.907.021908.031Nº Pcs.88-9, 10-11, 12-13, 14-15, 16-17 18-19, 20-22, 21-23T6MODULE 16REF.907.161908.031Nº Pcs.88, 10, 11, 12, 13, 14, 17, 19T689MODULE 0310REF.Nº Pcs.907.031908.121137-8-9-10-11-12-13-14-15-16-17-18-19T6MODULE 14REF.907.141908.261Nº Pcs.76x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19T61112MODULE 15REF.907.151908.251Nº Pcs.621 - 22 - 24 - 27 - 30 - 32T10131427

1MODULAR TOOL TRAYS23MODULE 06REF.Nº Pcs.MODULE 10REF.Nº Pcs.4907.061908.05166-7, 8-9, 10-11, 12-13, 14-15, 16-17T6907.101908.02168-9, 10-11, 12-13, 14-15, 16-17, 18-19T656MODULE 07MODULE 53 – RATCHET WRENCHREF.Nº Pcs.REF.Nº Pcs.7907.071908.081418-19, 21-23, 22-24, 27-30T8907.531908.03176 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19T68HEX1/4”9HEXMODULE 08 – HEX - HEXMODULE 20101112REF.907.081908.171Nº Pcs.108, 10, 11, 12, 13, 14, 16, 17, 18, 19T8BIHEXHEXREF.907.201908.131Nº Pcs.39 ( 1 /4”) HEX4- 4,5- 5- 5,5- 6- 7- 8- 9- 10- 11- 12- 13- 14105.501105.201105.251105.01150 mm.105.021150 mm.105.081105.701PH1- PH2- PH3PZ1- PZ2- PZ30,5x4 - 0,8x5,5 - 1,2x6,53 - 4 - 5T10-T15-T20-T25-T27-T30-T40T61314MODULE 09 – HEX - BIHEXREF.907.091908.171Nº Pcs.108, 10, 11, 12, 13, 14, 16, 17, 18, 19T828

MODULAR TOOL TRAYS11/4”1/2”2MODULE 21REF.907.211908.131MODULE 22Nº Pcs.45 ( 1 /4”) HEXMOD. 20 + 041.111(2 - 2,5 - 3 - 4 - 5 - 6)1/4”MODULE 24REF.907.241908.091Nº Pcs.21 ( 1 /2”) HEX8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 1819 - 22 - 24 - 27 - 30 - 32125.551125.011125 mm.125.021250 mm.125.081125.251345REF.907.221908.191Nº Pcs.52 ( 1 /4”) HEXMOD. 20+ 4L - 4,5L - 5L - 5,5L - 6L - 7L - 8L - 9L10L - 11L - 12L - 13L - 14L105.501105.201105.251105.01150 mm.105.021150 mm.105.081105.701PH1- PH2- PH3PZ1- PZ2- PZ30,5x4 - 0,8x5,5 - 1,2x6,53 - 4 - 5T10-T15-T20-T25-T27-T30-T40MODULE 25REF.907.251908.091Nº Pcs.21 ( 1 /2”) BIHEX= MOD. 24 ( )1/2”6783/8”1/2”9MODULE 23REF.907.231908.141Nº Pcs.22 ( 3 /8”) BIHEX6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 -16 - 17 - 18 - 19 - 20 - 21 - 22115.551115.251115.01175 mm.115.041275mm.115.081MODULE 27REF.907.271908.091Nº Pcs.21 ( 1 /2”) HEX= MOD. 24 (125.501 )10111/2”3/8”12MODULE 26REF.907.261908.141Nº Pcs.22 ( 3 /8”) BIHEX115.501MODULE 28REF.907.281908.091Nº Pcs.21 ( 1 /2”) BIHEX= MOD. 24 ( )131429

1MODULAR TOOL TRAYS21/4”34MODULE 57REF.907.571908.231Nº Pcs.221/4” E4-E5-E6-E7-E8-E101/2” E12-E14-E16-E18-E20-E24TORX T20-T25-T27-T30-T40- T45-T50-T55-T60TORX T70L.MODULE 61REF.907.611908.241Nº Pcs.10TORX T20-T25-T27-T30-T40- T45-T50-T55-T60TORX T70L.567MODULE 58REF.907.581908.231Nº Pcs.251/4” E4-E5-E6-E7-E8-E101/2” E12-E14-E16-E18-E20-E24TORX T30-T40-T45-T50-T55TORX T70L.HEX. 5-6-7-8-10-12-14MODULE 62REF.907.621908.241Nº Pcs.8HEX 5-6-7-8-10-12-14-178MODULE 63910MODULE 59REF.907.591908.231Nº Pcs.251/4” E4-E5-E6-E7-E8-E101/2” E12-E14-E16-E18-E20-E24TORX T55TORX T70L.XZN 10-12-14RIBE 12-14HEX. 10-13-14-17-19-22REF.907.631908.271Nº Pcs.25E6xE8 - E10xE12 - E14xE18 - E20xE241/4” E8 - E10 - E12 - E14 - E16 - E18 - E20 - E24TORX T20 - T25 - T27 - T30 - T40 - T45 - T50 - T55 - T60TORX T40L - T45L - T55LCód. 470.041 - Bit holder 1 /2”1112The TORX® solutionTORX® SET IN MODULAR BOX13MODULE 60REF.907.601908.241Nº Pcs.16TORX T27-T30-T40-T45-T50-T55-T60TORX T70L.HEX 5-6-7-8-10-12-14-17REF.129.601Nº Pcs.301/4” E4-E5-E6-E7-E8-E101/2” E12-E14-E16-E18-E20-E24TORX T20-T25-T27-T30-T40-T45-T50-T55-T60TORX T70L.REF. 453.901 - T9-T10-T15-T20-T25-T27-T30-T401430

MODULAR TOOL TRAYS12MODULE 75REF.907.751908.301Nº Pcs.91/2” 8-101/2” 12-14-171/2” 101/2” TORX T55Ref. 125.481 1/2” offset handleRef. 060.011 Oil filter wrench (65-110 mm.)MODULE 34REF.907.341908.061Nº Pcs.4621.571 Int. Straight 19-60621.671 Int. Curved 19-60621.771 Ext. Straight 19-60621.871 Ext. Curved 19-60L1803456MODULE 30REF.907.301908.041Nº Pcs.3180 mm. - 601.471160 mm. - 624.191200 mm.- 612.291MODULE 56REF.907.561908.221Nº Pcs.6REF. 546.011 -REF. 641.021 -235 mm.789MODULE 31REF.907.311908.041Nº Pcs.3180mm. - 625.651200 mm. - 612.291235 mm. - 641.021MODULE 42REF.907.421908.201Nº Pcs.93x 75 - 4x100 - 5,5x125 - 6,5x150 - 8x175PH1x100 - PH2x1256,5x25PH2x25101112MODULE 32REF.907.321908.041Nº Pcs.3180 mm. - 601.471160 mm. - 624.191240 mm. - 634.101MODULE 43REF.907.431908.201Nº Pcs.7T10-T15-T25-T27-T30-T40131431

1MODULAR TOOL TRAYS23MODULE 50REF.Nº Pcs.MODULE 51REF.Nº Pcs.4907.501908.1618”6907.511908.1819Cód. 529.171 + 521.031200 mm.2-3-4-5-6 mm.4 mm.567MODULE 70REF.Nº Pcs.MODULE 52REF.Nº Pcs.8907.701908.2816Ref. 532.731 SpoonRef. 532.401 Round dollieRef. 532.481 Heel dollieRef. 532.541 Wedge dollieRef. BHC Rubber dollieRef. 641.571 Microgrip907.521908.1819Cód. 529.171 + 522.051200 mm.2-3-4-5-6 mm.4 mm.91011MODULE 71MODULE 64REF.Nº Pcs.REF.Nº Pcs.12907.711908.2916Ref. 531.201 Hammer nº 1Ref. 531.331 Hammer nº 5Ref. 641.571 Microgrip x 4907.641908.1819Cód. 529.171 + 525.731200 mm.2-3-4-5-6 mm.4 mm.131432

EMPTY TRAYS12MODULE 80MODULE 833REF.REF.907.801T6 (174 x 261)907.8312 T3 (87 x 261)45MODULE 81REF.907.811T8 (174 x 348)MODULE 84REF.907.8411 T2 + 2 T367MODULE 828REF.907.8213 T2 (87 x 174)9MODULAR TRAY SET DISPENSER10111213REF.Cap.grs.910.9015 mod.6101433

123456789101112131434

123456782WRENCHES9Ref. 001.021page 37Ref. 020.011page 43Ref. 030.241page 4610Ref. 010.001page 38Ref. 028.021page 44Ref. 051.061page 4711Ref. 015.011page 39Ref. 025.061page 40Ref. 019.511page 44Ref. 033.061page 45Ref. 055.011page 48Ref. 417.011page 4912Ref. 018.511page 41Ref. 029.351page 45Ref. 192.011page 491314

1HEAVY DUTY ADJUSTABLE WRENCH32better accesibilityDimensionsaccording toISO 67874567TorsiontorquesISO 6787+125%greater capacityREF.001.021001.031001.041001.051001.061001.071001.081Desig.3/8”1/2”5/8”3/4”1"1. 1 /4”1. 5 /8”inch681012162030Lmm.150200250300400500750Cap. (s)194619273036465672Cap. (s)mm212934394857,1577newinchThe strongest of these characteristicsunique in the world13/161. 1 /81. 5 /161. 1 /21. 7 /82. 1 /4389Wider30” wrench, forged in one pieceoptimal for hexagonalnuts1011NewmoreergonomicdesignProduced byEurotools, the onlyEuropean manufacturerof these wrenches1213RounderMorecomfortableInvented byIRIMO in 19461436

HEAVY DUTY ADJUSTABLE WRENCHES1UNE 16532ISO 6787DIN 311723B4Hardness: 40÷45 HRcFinishing: CromadoCHROME VANADIUM STEELREF.Desig.ABDELgrs.u.EADL5001.021001.031001.041001.051001.061001.071001.081150 mm. 6" - 3/8200 mm. 8" - 1/2250 mm. 10" - 5/8300 mm. 12" - 3/4400 mm. 16" - 1"500 mm. 20" - 1.1/4750 mm. 30" - 1.5/82129343949627818,52632364453706,58910141723121417202630371552052553054055007501402905107951.6202.8605.550111111167ADJUSTABLE WRENCHES8UNE 16532ISO 6787DIN 3117Hardness: 40÷45 HRcFinishing: ChromedCHROME VANADIUM STEELEADBL9REF.005.011005.021005.031005.041005.051005.061005.071Desig.100 mm. - 4"150 mm. - 6"200 mm. - 8"250 mm. - 10"300 mm. - 12"375 mm. - 15"450 mm. - 18"A13202429364357B13,5212629,5364553D3,55,57,59111315E91213,516192427,5L115160205260310385465grs.601302504056501.2302.000u.5555511101112131437

1OPEN END WRENCHES2UNE 16521ISO 10102DIN 311034Hardness: 44÷50 HRcFinishing: ChromedB1S1LS2B2ESETSREF.S1xS2B1B2ELgrs.u.REF.Nº Pcs.Contentsgrs.56789010.001010.021010.011010.031010.041010.051* 010.061010.821010.071* 010.081010.101010.091010.111010.121010.131010.141* 010.831010.161010.171010.181010.191010.201010.211010.221010.241010.231* 010.811010.251010.271010.261010.281010.291010.3014x55,5x76x78x98x1010x1110x1210x1312x1313x1413x1714x1514x1716x1717x1918x1918x2119x2220x2221x2322x2424x2624x2725x2827x2927x3027x3230x3232x3634x3636x4141x4646x5013161619192323232828313131353939394242454549495353536060666674829315181821212626263030343434374141414646494953535858586767747483931003,2444,34,34,84,84,85,55,55,95,95,96,36,86,86,87,37,37,57,58,18,18,78,78,79,39,311,311,311,812,312,8105120120135135150150150165165180180180195210210210225225240240260260280280280300300355355385415445152121303046464666669595951241601571541901882112082932843663623604714817147008801.1851.550101010101101101011101101010111055515511511111011.111011.121011.131011.141011.151011.161011.171011.181011.311011.321011.3316681010812126686-7, 8-9, 10-11, 12-1314-15, 16-176-7, 8-9, 10-11, 12-1314-17, 19-226-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-226-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-266-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-276-7, 8-9, 10-11, 12-1314-17, 19-22, 24-27, 30-326-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-26, 25-28, 30-326-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-27, 25-28, 30-323/8-7/16, 7/16-1/2, 1/2-9/16,9/16-5/8, 11/16-3/4, 13/16-7/81/4-5/16, 3/8-7/16, 1/2-9/16,5/8-11/16, 3/4-7/8, 15/16-1"1/4-5/16, 3/8-7/16, 1/2-9/16,19/32-5/8, 11/16-3/4, 13/16-7/8,15/16-1", 1.1/16-1.1/84204907701.2701.2851.2352.1552.1206557801.28510REF.SB1B2ELgrs.u.11121314010.311010.331010.341010.351010.361010.371* 010.381010.401010.411010.421010.451010.461010.481010.491010.521010.531010.571010.581010.591010.6111/4 x 5 /165/16 x 3 /83/8 x 7 /167/16 x 1 /21/2 x 9 /169/16 x 5 /819/32 x 5 /85/8 x 11 /165/8 x 3 /411/16 x 3 /43/4 x 7 /813/16 x 7 /87/8 x 15 /1615/16 x 1"1. 1 /16 x 1. 1 /81. 1 /16 x 1. 1 /41. 5 /16 x 1. 1 /21. 7 /16 x 1. 5 /81. 5 /8 x 1. 13 /161. 13 /16 x 2"* Hasta agotar existencias.16192328283131353539424245495360667482931821263030343437374146464953586774839310044,34,85,55,55,95,96,36,36,87,37,37,58,18,79,311,311,812,312,8120135150165165180180195195210225225240260280300355385415445213046666695951231221601901902102933624717108901.1201.52011111111111111111111SETSREF.011.411011.421011.431011.441Nº Pcs.681212Contents6-7, 8-9, 10-11, 12-1314-15, 16-176-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-226-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-26, 25-28, 30-326-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-27, 25-28, 30-32- Quicker use due to its 15ºangle head desing.- Small size head.grs.4358102.2702.22038

OFFSET RING WRENCHES1UNE 16522ISO 10104DIN 83823HE2Hardness: 42÷48 HRcFinishing: ChromedE1HLB1 S1 S2 B2SETS4REF.S1xS2B1B2E1E2HLgrs.u.REF.Nº Pcs.Contentsgrs.015.011015.031015.051015.071015.091015.121015.131(1) 018.131015.141015.161015.171(2) 018.181*015.181015.191015.201015.211015.221015.241015.261015.231015.251015.271015.281015.291015.3016x78x910x1112x1314x1516x1717x1917x19(Seat)18x1919x2220x2221x22 R21x2322x2424x2624x2725x2827x2927x3027x3230x3232x3636x4141x4646X5010,51316,118,722,52527,52727,530,630,63732,732,735,735,737,8424241,546,549,55561,567,51214,518,120,824,52729,529,529,533,733,73835,735,740404346,146,14849,555,561,567,57456788,59,510,51010,511,511,5151212131313,5141414151718,5202166,57,58,59,5101111111212151313141414,5151515,5161819,521221819212324262845,52830303330303232333535353539,54244461651801902102252452652652652902903033053053253253353513513603614164444825405069921171482012522522443163215953493704404505255945916036791.0151.2151.5501.9301010101010101010101555151551151111016.111016.131016.141016.151016.171016.181016.281016.2916810101212566-7, 8-9, 10-11, 12-1314-15, 16-176-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-226-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-266-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-276-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-26, 25-28, 30-326-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-27, 25-28, 30-325/16-3/8, 7/16-1/2, 1/2-9/16,9/16-5/8, 3/4-7/81/4-5/16, 3/8-7/16, 1/2-9/16,5/8-11/16, 3/4-7/8, 15/16-1"6901.2452.0902.5303.2803.2657801.2355678DEEP OFFSETHEAVY DUTY*Until stock runs out9REF.015.311015.331015.341015.351015.361015.371015.401015.421015.451015.461015.481015.491015.521015.531015.591015.551S1xS21/4x 5 /165/16x 3 /83/8x 7 /167/16x 1 /21/2x 9 /169/16x 5 /85/8x 11 /1611/16x 3 /43/4x 7 /813/16x 7 /87/8x 15 /1615/16x11. 1 /16x1. 1 /81. 1 /16x1. 1 /41. 1 /4x1. 7 /161. 5 /16x1. 1 /2B110,51316,118,718,722,52527,530,630,632,735,74241,549,549,5B21214,518,120,822,524,52729,533,733,735,74046,14855,555,5E1567888,59,510,511,511,5121314141717E266,57,58,58,59,51011121213141515,51818H181921232324262830303032353439,539,5L165180190210210225245265290290305325351357416416grs.506981117117148201244316321349440594610980990u.1111111111111111SETSREF.016.421016.431016.441Nº Pcs.81212Contents6-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-226-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-26, 25-28, 30-326-7, 8-9, 10-11, 12-1314-15, 16-17, 18-19, 20-2221-23, 24-27, 25-28, 30-32grs.1.3503.4903.465101112- Chrome vanadium steel13Extra thin ringsOffset shape providesgreater accesibility1439

1COMBINATION WRENCH2UNE 16538ISO 7738DIN 31133B1SS B24Hardness: 44÷50 HRcFinishing: ChromedE1LE2REF.SB1B2E1E2Lgrs.u.REF.Nº Pcs.Contentsgrs.567891011121314025.061025.071025.081025.091025.101025.111025.121025.131025.141025.151025.161025.171025.181025.191025.201025.211025.221025.231025.241025.251025.261025.271025.281025.291025.301025.321025.341025.361025.411025.461025.501025.751025.761025.771025.781025.79167891011121314151617181920212223242526272829303234364146505560657075161819212326283031343537394142454549495353585860606767748292100113125132140150REF. S B1025.511 1/4 16025.521 5/16 19025.531 3/8 21025.541 7/16 26025.551 1/2 30025.561 9/16 31025.571 5/8 35025.581 11/16 39025.591 3/4 41025.601 13/16 45025.611 7/8 45025.621 15/16 49025.631 1 53025.641 1. 1 /16 58025.651 1. 1 /8 58025.671 1. 1 /4 67025.681 1. 3 /8 74025.691 1. 7 /16 74025.731 1. 1 /2 74025.701 1. 5 /8 80025.711 1. 13 /16 91025.721 2 100- Chrome vanadium steel10,5121314,51616,518,51919,821,42324,82627,52932323535393941414545484854616673849098102108B210,51314,516,51919,8232627,5323235394141485454546166733,73,74,4,4,74,75,25,25,85,866,5777,57,77,78,38,38,98,98,98,99,59,59,59,510,41215171820212225E13,7444,75,25,86777,77,78,38,98,98,99,510,410,410,411,5151755,566,577,588,38,999,51010,511,211,212121313141414,514,5151516161719,523262830343538E2566,57,58,38,99,510,511,21212131414,514,51617171719,52326105110120125135144155165175184195204215229240250250270270290290310310330330350350401436556602612660710760810L105120125144165175195215229250250270290310310350401401401435555602141924283845596777891101231391721812042012822643523453923894654565525507871.0701.7502.2003.0703.5004.7505.5506.800grs.1424284567771101391722042042823523923925527877877871.0501.8502.21510101010101010101010101010105551511511551111111111u.1111111111111111111111026.111026.121026.131026.141026.151026.311026.321026.331REF.026.411026.421026.431026.441026.451026.461026.511026.52168121214Extra thin rings.Countersunk shape provideseasier tool placement.81214Nº Pcs.68121417268128, 10, 11, 13, 14, 178, 10, 11, 13, 14, 17, 19, 228, 9, 10, 11, 12,13, 14, 15, 16,17, 19, 2210, 11, 12, 13, 14, 17, 19, 22,24, 27, 30, 328, 9, 10, 11, 12, 13, 14, 17, 19,22, 24, 27, 30, 323/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 7/83/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 7/8, 15/16, 1.1/16, 1.1/8,1.1/43/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 13/16, 7/8, 15/16, 1"1.1/16, 1.1/8, 1.1/4Contents8, 10, 11, 13, 14, 178, 10, 11, 13, 14,17, 19, 2210, 11, 12, 13, 14, 17, 19, 22,24, 27, 30, 3210, 11, 12, 13, 14, 16, 17, 19, 21,22, 24 ,27, 30, 326, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 21, 226, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 21, 22, 23, 24, 25,26, 27, 28, 29, 30, 323/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 7/83/8, 7/16, 1/2, 9/16, 5/8, 11/16,3/4, 7/8, 15/16, 1.1/16, 1.1/8, 1.1/43777421.0353.5052.5258141.0802.785grs.4108102.5502.9001.6005.2508902.600New wave-shape, NPP, which appliestorque to the nut sides withoutdamaging the weaker nut corners.* Up to 32 mm.40

OFFSET RATCHET WRENCH41u.11111111grs.40507090130170210250L115128150170190200230245E26,56,97,78,69,410,311,213,0E16,36,57,38,29,09,910,311,2D21720222530323440D11417202327303234S1x S26x78x910x1112x1314x1516x1718x1920x22REF.019.611019.621019.631019.641019.651019.661019.671019.681LS2D2S1D1E1E2RATCHETINGCOMBINATION WRENCHRATCHETINGCOMBINATIONWRENCH DISPLAY58grs12.000910.681REF.018.531018.551018.561018.571018.581018.591018.621018.641018.661018.6718 510 1011 512 513 1014 517 519 522 424 4CompositionREF. u.mmSLB1SB2E2E1Strong ratchet exceeds ISO plus endurance15ºReverse lever15º angle forbetter handlingand accessREF.018.511018.521018.531018.541018.551018.561018.571018.581018.591018.601018.611018.621018.631018.641018.651018.661018.671018.681018.691018.721B11517171921232527293133363840464652576366B21417171820222325272830323334404046535963E13,94,64,64,95,35,66,06,46,87,07,27,78,28,89,09,010,010,511,412,5E26,36,56,56,97,37,78,28,69,09,49,910,310,711,213,013,014,515,517,017,5L128140140150159165172178191200208226237248290290323359493425grs.2735384857678295113130158180213233343345503550750900u.11111111111111111111S678910111213141516171819212224273032SETSREF.018.701018.711018.901Nº Pcs.7129Contents8,10,11,12,13,17,198,9,10,11,12,13,14,15,16,17,18,1910, 13, 19 + 6 adaptgrs.7901.4655001141312111098765324

REF.018.161018.171018.191D11,115,515,5L151621grs.51515u.1111/4"5/16"10101313Converts wrench into bit holderLDREF.018.001Nº Pcs.6grs.110JUEGOISO- 1711-1LSB1B2SE2E1REF.018.751018.771018.801018.841018.861S810131719B11721273640B21720253234E14,04,85,87,28,2E26,57,38,610,311,2L9095108127139grs.253563113143u.11111REF.018.951Nº Pcs.5Contents8, 10, 13, 17, 19grs.410SETS42SETSgrs.635Contents10-22Nº Pcs.10REF.023.7013/8 CROWFOOT WRENCHES,BIHEX AND HEAVY DUTY FORMBCSEFLREF.023.501023.511023.531023.541023.551023.571023.581023.591023.611023.621S10111314151718192122B25252529293535354242C781011121414151517E9,59,59,510,510,512,512,512,51414F16161619192020202323L37373742424646465050grs.3535354747707070100100u.1111111111FLEX HEAD RATCHETINGCOMBINATION WRENCHREF.019.351Nº Pcs.8Contents8-19grs.900SETSREF.019.081019.101019.111019.121019.131019.141019.171019.191B11721232527293640B21720222325273234E14,35,05,45,86,16,47,68,6E26,57,37,78,28,69,010,311,2L127136141148154160190215grs.3555638393113173233u.11111111S810111213141719SLB1SB2E2E1REF.018.111018.121018.141D11,214,621,5L182330grs.102045u.1111/4"3/8"1/2"101319ADAPTORSConverts wrenchinto ratchetLDRACHETING COMBINATIONWRENCH SHORT SERIES*Until stock runs out***********Contentsadaptors1413121110987654321

ADJUSTABLE 3/8"CROWFOOT WRENCHDOUBLE END FLARENUT WRENCHES1DIN 31182Hardness: 42÷48 HRcFinishing: ChromedE1LB1 C1C2 B2E23REF.001.831A29B26C56D65E14,5L66grs.170u.1REF.S1xS28x1010x1111x1312x14023.031023.061* 023.081023.121* 023.221* 023.261* 023.301* 023.331* 023.381* Without NPP.S1xS217x1919x2222x2424x2730x32B11818202229,532384250B2202022263238424652C16,37,18,691415,8171822C27,18,6101115,817182024E17,48,98,99,412,313,214,816,319,7E28,98,99,410,813,214,816,316,721,7L150165165190215230245260288grs.536768103144181264317445u.11111111145FLAT RING WRENCHES6UNE 16545ISO 10103DIN 837New wave-shape, NPP, whichapplies torque to the nut sideswithout damaging the weakernut corners.7L8Hardness: 42÷48 HRcFinishing: ChromedREF.020.011020.031020.051020.071020.091020.121020.131020.141020.171020.181020.201020.211020.221020.241020.251S6x78x910x1112x1314x1516x1717x1918x1920x2221x2324x2624x2725x2827x2930x32B19,812,51518,5212426,526,52930353537,537,543B2111416,52022,52527,527,5323337,537,5414145,5E4,55,566,577,58899,51111111112B1S1L95110125140155170183185205225250250275275300grs.1422324657739694125154210208280272367u.10101010101011010551115S2B2SETSREF.021.121021.131021.141021.151021.161Nº Pcs.810101212Contents6-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-226-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-266-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-276-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-26, 25-28, 30-326-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-27, 25-28, 30-32grs.4708558501.4751.4759101112SETSREF.021.221021.251Nº Pcs.812Contents6-7, 8-9, 10-11, 12-13, 14-15, 16-17,18-19, 20-226-7, 8-9, 10-11, 12-13, 14-15, 16-17,18-19, 20-22, 21-23, 24-27, 25-28, 30-32grs.5001.550131443

1TORX ® FLAT RINGWRENCHRATCHETINGWRENCHES23E1LE2B1B245REF.S1 S2 B1 B2 E1 E2 L029.031 E6 x E8 5,7 7,5 10 12 5 6 105029.051 E10 x E12 9,4 11,1 15 18 7,5 8,5 140029.071 E14 x E18 12,9 16,6 20 23 10 11 165029.081 E20 x E24 18,4 22,1 27 30 12 13 210"Torx® is a registered trade name of Camcar Division of Textron Inc."S1grs.203575160u.1111S2Hardness:REF.019.511019.521019.531019.541019.551019.561019.571019.581Chrome plated shankBlack finish gearS1xS26x78x910x1112x1314x1516x1718x1920x22D11417202327303234D21720222530323440E16,36,57,38,29,09,910,311,2E26,56,97,78,69,410,311,213L115128150170190200230245grs.35456080120160200250BIHEXu.111111116D2D1SETSREF.Nº Pcs.Contentsgrs.S2LS17029.1014E-6 x E8 – E-20 x E-24300E8HALF MOONWRENCHESThe ratchet accelerates the fasteningof screws and bolts, improving theperformance of other wrenches.he turning angle can be smaller than inopen end or ring wrenches.There is no problem to work with longstuds.9UNE 16515ISO 331812 pointsProfessional Profile1011Hardness: 40÷45 HRcFinishing: ChromedE1S1D1LS2D2E2REF.SD1D2E1E2Lgrs.u.12028.021028.111028.16111x1314x1719x2217,5232920,526337911791115318523580150262111131444

45SINGLE OPEN ENDWRENCHUNE 16513DIN 894grs.1091518202730364342425557741151151601902603203154104105808001.0601.3251.6151.8802.2102.7253.2103.8003.5256.6006.3508.9009.0008.900u.111111111111111111111111111111111111111L7878931001051101201301351401401501501701901922152352702702703003203353754104574925285706056426866908478521.0001.0001.000B16,517192223,52627,527,532323235,536414749515665656574748294102112122132140152162172172195195220225225A33,53,54,24,2555,55,55,55,5666,57,5891011,511,51213,513,51415181818,520,52121,52224242626,5282828678910111213141516171819212224273032343638414650556065707580859095100105115120SREF.033.061033.071033.081033.091033.101033.111033.121033.131033.141033.151033.161033.171033.181033.191033.211033.221033.241033.271033.301033.321033.341033.361033.381033.411033.461033.501033.551033.601033.651033.701033.751033.801033.811033.831033.851033.871033.891033.931033.951BSAL15ºHardness: 39÷44 HRcADJUSTABLE HOOKWRENCHDIN 137-BABSLHardness: 40 HRc15-3535-5050-8080-120120-180SA568911B33406085118L165202280338465grs.871533677151.475u.11111REF.029.351029.361029.371029.381029.391FIXED PINDIN 137-BLBASHardness: 40 HRc15-3535-5050-8080-120120-180SA1012141821B33445890125L165205280335465grs.851583956951.530u.11111REF.029.751029.761029.771029.781029.791INTERCHANGEABLE PINu.11111grs.2591934D34568029.751029.761029.771029.781029.791For wrenchREF.029.801029.811029.821029.831029.841DSPARE PINS1141312111098765324

SLUGGING RINGWRENCHES46UNE 16550DIN 7444Hardness:From 24 to 46 mm. 34÷40 HRcFrom 50 to 120 mm. 30÷36 HRcFinishing: ChromedLDSEUNE 16571ISO 691DIN 133LABS15ºHardness:From 30 to 46: 34÷40 HRcFrom 50 to 85: 30÷36 HRcSLUGGING OPEN ENDWRENCHESREF.030.241030.271030.301030.321030.341030.361030.381030.411030.461030.501030.551030.601030.651030.701030.751030.801030.811030.831030.851030.871030.891030.911030.931030.951S24273032343638414650556065707580859095100105110115120D434653535959596574798693102110110126126142142155155170170182E151618181818182022,5242526303333363640404545484854L165180195195205205205230240255270280300330330360360390390420420450450480grs.2352904354155105105107109801.0501.4101.6401.9602.9302.7003.9303.8005.3405.0606.4005.8007.4506.7258.900u.111111111111111111111111grs.4404356859251.2321.5652.0702.6103.3804.6454.3005.6705.700L190190215232255272295320340375375410410B6161758697106117128138155155172172A17171919212224,52528,530303334S30323641465055606570758085REF.031.301031.321031.361031.411031.461031.501031.551031.601031.651031.701031.751031.801031.851u.1111111111111HEAVY DUTY DEEPOFFSET RING WRENCHESUNE 16502ISO 691DIN 475BADLSHardness: 35÷40 HRcgrs.3904204987288157809701.1601.3451.4602.1752.5002.8503.0403.7653.5355.1504.9004.8004.650L180190200235245250270285295303350360370380390390410410415415D18,518,518,521,521,521,521,524,524,524,529,529,529,529,529,529,529,529,529,529,5B374046485454626974789096105108124124140140146146A17171818,520212223262830333738414145454545S242730323638414650556065707580859095100105REF.032.241032.271032.301032.321032.361032.381032.411032.461032.501032.551032.601032.651032.701032.751032.801032.851032.901032.951032.971032.991u.11111111111111111111BAR HANDLESLDgrs.7451.1202.7552.855L460610760860D18,821,824,829,8SFor sizes24-3032-4146-5560-105REF.032.011032.021032.031032.041u.1111HEX KEY WRENCHESSee chapter 71413121110987654321

47UNE 16594-1 UNE 16594-2Hardness: 42÷48 HRcFinishing: Chromedu.55555555555555555551111111grs.424477861021161651812582763704104364645856446957459339881.0441.0911.3181.3571.3981.606L97105115126136145157168178187200208220232243252266278288299312323334345357381H1719212225282931333638404243464850525558606164666872D101112131516,517,51920,521,52324,525,5272829,53132,533,53536,53739404144S.678910111213141516171819202122232425262728293032REF.050.061050.071050.081050.091050.101050.111050.121050.131050.141050.151050.161050.171050.181050.191050.201050.211050.221050.231050.241050.251050.261050.271050.281050.291050.301050.321LDDSHHardness: 42÷48 HRcFinishing: ChromedHPSBDLDREF.BIHEX-HEX051.061051.071051.081051.091051.101051.111051.121051.131051.141051.151051.161051.171051.181051.191051.201051.211051.221051.231051.241051.251051.261051.271051.281051.291051.301051.321REF.HEX-HEX052.061052.071052.081052.091052.101052.111052.121052.131052.141052.151052.161052.171052.181052.191052.201052.211052.221052.231052.241052.251052.261052.271052.281052.291052.301052.321S678910111213141516171819202122232425262728293032D1011121314,516,517,51920,521,52324,525,5272829,53132,533,53536,53739404144H1719242527293134363843444548505153586058586363637575B55778899101013131414151516161818202022222424P2425272831344040424550505356596063687173757881828691L95100110115125130145160175180190195200210220225235245255260265275285295305330grs.324656731001191431801942172993083153584354694995556077557858939901.1001.0971.402u.55555555555555555551111111Contents8, 10, 11, 13, 14,17, 19, 228, 10, 12, 13, 14,17, 19, 22Nº Pcs.88REF.BIHEX-HEX051.601051.611grs.1.8301.850grs.1.450Contents8, 9, 10, 11, 13, 14, 17, 19Nº Pcs.8REF.HEX-HEX052.501REF.BIHEX-HEX051.501FORGED DOUBLE ENDOFFSET SOCKETWRENCHESFORGED DOUBLE ENDOFFSET OPEN SOCKETWRENCHESSET IN PLASTIC POUCHOPEN SOCKET WRENCH SETS1141312111098765324

1FORGED DOUBLE END SOCKET WRENCHES2UNE 1658634D5D4Hardness: 42÷48 HRcFinishing: ChromedS2D2LS1567REF.055.011055.031055.051055.071055.091055.121055.141055.171055.181055.201055.211055.221055.241055.251S1xS26x78x910x1112x1314x15*16x17*18x19*20x22*21x23*24x26*24x27*25x28*27x29*30x32* With hole to locate stud.ØD41012,5151720222528293333343740ØD51113,5161921242630313537373943D279111314161820212424252730L103108120138143153163173183193193203208208grs.315378127152185235312359438466535592737u.1010101010101010551555REF.056.111056.131056.141056.151056.171056.181Nº Pcs.6810101212ØD56-7, 8-9, 10-11, 12-13, 14-15, 16-176-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-226-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-266-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-276-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24-2625-28, 30-326-7, 8-9, 10-11, 12-13, 14-15, 16-1718-19, 20-22, 21-23, 24--2725-28, 30-32grs.7306302.1202.1353.1203.1308UNE 16583DIN 90091 2 3 4 5 6Hardness: 42÷48 HRcFinishing: ChromedLSET IN PLASTIC POUCH1011REF.055.301055.311Sliding diameter mm.13,16,824,37,835,39,845,811,85812,86-14L175270NUT DRIVERSBAR HANDLESUso en llaves6x7 a 14x1516x17 a 30x32grs.54251REF.056.231056.271Nº Pcs.812Contents6-7, 8-9, 10-11, 12-13, 14-15,16-17, 18-19, 20-226-7, 8-9, 10-11, 12-13, 14-15,16-17, 18-19, 20-22, 21-23,24-26, 25-28, 30-32grs.1.1503.200121314UNE 16502ISO 691DIN 3125BCLREF.417.011417.021417.031417.041417.051417.061417.071417.081417.091417.101417.111417.121417.131417.141S3,244,555,567891011121314C125125125125125125125125125125125125125125B5,76,97,58,28,89,411,012,213,514,716,017,218,519,7L215215215250250250260260260260270270270270grs.606060707070120120120120155155155155u.5555555555555548

NUT DRIVER FLEXIBLESHANK“T” HANDLE SWIVELSOCKET WRENCH1UNE 16507-1ISO 2725HARDNESS:FINISHING: CHROMED2ABLSDL13REF.SABLgrs.u.L190.461190.471190.481190.501UNE 16502ISO 691DIN 3125678109,41112,214,4135135135135260270270270125125125125"T" HANDLE NUT DRIVERS1111REF.064.071064.081064.091064.101064.111064.121064.131064.141064.151064.161064.171064.181064.191S78910111213141516171819D10,812,113,314,715,81718,719,720,92223,42526L395395395400400400430430445445445445500L’145145145160160160175175200200200200230grs.165165165280270270380380555580580555885u.1111111111111456L 1ACREF.SL 1ACLgrs.u.L7191.361191.371191.381191.401191.421191.43167810121313716416416416416491011,514171885105105105105105187222222222222222587377100115120555555REF.064.901Nº Pcs.6Contents8-10-12-13-14-17grs.2.1108SWIVEL SOCKET WRENCH9UNE 16595ISO 691DIN 475Hardness: 42÷48 HRcFinishing: chromed10S1 D1 D2 S211LSWIVEL SOCKET WRENCH SETREF.192.011192.031192.051192.061192.071192.091192.121192.131192.141192.171192.181192.211192.251S1xS26x78x 910x1110x1312x1314x1516x1717x1918x1920x2221x2324x2730x32D110,112,814,214,116,62022,323,625,127,528,831,840,5D211,313,815,417,81821,223,626,126,130,231,236,743,0L186188200221226219250250250290290330363grs.100125145155155235390400400630650675800u.2222222222221REF.192.901Nº Pcs.6Contents10-11, 12-13, 14-15, 16-17, 18-19, 20-22grs.2.07512131449

1HEXAGONAL FEMALE SCREWSmm.U.S.A.G.B.2SDIN 912DIN 6912DIN 7984DIN 7991DIN913-916USAS B 18-3-1969BS 2470-1954Sddddd d ddd34mm.1,522,53456789101214171922mm.1,6-22,53456810121416-1820-2224-2730mm.3456810121416-1820-2224mm.2,533,5-4568101214-1618-20mm.345681012162024"1/165/643/327/641/89/645/323/167/321/45/163/81/29/165/83/4mm.1,591,982,382,783,173,573,974,755,556,357,949,5212,7014,2915,8819,05"Nº 1Nº 2-Nº 3Nº 4-Nº 5Nº 6Nº 8Nº 101/45/163/87/16-1/25/83/47/8-1"Nº 3-Nº 4Nº 5-Nº 6Nº 8Nº 101/45/163/87/161/25/83/47/811 1/8"Nº 5-Nº 6Nº 8Nº 101/45/163/87/161/25/83/47/81-1 1/81 1/4-1 3/81 1/26 BA5 BA-4 BA3/16-2 BA-1 BA1/4-0 BA5/163/8-7/161/25/83/4-7/815 BA-4 BA3 BA3/16-2 BA-1 BA0 BA-1/45/163/8-BSP 1/87/161/2-BSP 1/45/8-BSP 3/83/4-BSP 1/27/8-BSP 5/81-BSP 3/45THREAD DIAMETERS AND DIAMETER/KEYSmm.UNIFIED U.S.A. G.B.6ISO 2721982UNE 170521978DIN 9311970NFE 271111930DS 2074-51968S S SBS 1769BS 1768BS 1768ASA B 18-2-2ASA B 18-2-1ASA B 18-2-1ASA B 18-2-2BS 916-1083BA BS 57W BS 192ddddddddddddd7891011121314mm.3,23,544,555,56789101112131415161718192122232426272829303234353638414246505455586063656770717577808285889094951001051101151161201,622,5345678101214161820222427303336394245485256606468727680851,622,5345678101214161820222427303336394245485256606468727680851,61,722,32,633,545678101214161820222427303336394245485256606468727680852,533,54-4,555,56789101112141618202224273033363942454852566064687276801/45/163/87/161/25/83/47/811 1/81 1/41 3/81 1/21 5/81 3/41 7/822 1/42 1/22 3/433 1/4A.F.3/321/85/323/167/321/49/325/1611/323/87/161/29/1619/325/811/163/413/167/815/1611 1/161 1/81 3/161 1/41 5/161 3/81 7/161 1/21 5/81 11/161 3/41 13/161 7/822 1/162 3/162 1/42 3/82 7/162 9/162 5/82 3/42 13/162 15/1633 1/83 3/83 1/23 3/43 7/84 1/84 1/44 1/24 5/8mm.2,383,173,974,765,566,357,147,948,739,5211,1112,7014,2915,0815,8817,4619,0520.6422,2223,8125,4026,9928,5830,1631,7533,3434,9236,5138,1041,2842,8644,4546,0447,6250,8052,3955,5657,1760,3261,9165,0966,6869,8571,4474,6176,2079,3885,7288,9095,2598,42104,78107,95114,30117,481/45/163/87/161/25/83/47/811 1/81 1/41 3/81 1/21 3/421/45/163/87/161/29/165/83/47/811 1/81 1/41 3/81 1/21 3/421/45/163/87/161/29/165/83/47/811 1/81 1/41 3/81 1/21 3/421/45/163/87/161/29/165/83/47/811 1/81 1/41 3/81 1/21 5/81 3/41 7/822 1/42 1/22 3/431/45/163/87/161/29/165/83/47/811 1/81 1/41 3/81 1/21 5/81 3/41 7/822 1/42 1/22 3/431/45/163/87/161/29/165/83/47/811 1/81 1/41 3/81 1/2"0,1170,1310,1520,1720,1930,2200,2480,2820,3240,3400,3650,4130,4450,5250,6000,7100,8200,9201,0101,1001,2001,3001,3901,4801,6701,8602,0502,2202,4102,5802,7603,1503,5503,8904,1804,5304,850mm.2,973,323,864,374,905,596,307,168,238,649,2710,4911,3013,3415,2418,0320,8323,3725,6527,9430,4833,0235,3137,5942,4247,2452,0756,3961,2165,5370,1076,7080,0190,1798,81106,17115,06123,193/161/45/163/87/161/29/165/811/163/47/815/1611 1/81 1/41 3/81 1/21 5/81 3/422 1/42 1/22 3/433 1/43 1/210 BA9 BA8 BA7 BA6 BA5 BA4 BA3 BA2 BA1/8 W1 BA0 BA3/16 W1/4 W5/16 W3/8 W7 /16 W1/2 W9/16 W5/8 W11/16 W3/4 W13/16 W7/8 W1 W1 1/8 W1 1/4 W1 3/8 W1/2 W1 5/8 W1 3/4 W1 7/8 W2 W50

123456783 TORQUETOOLSRef. 070.061page 53Ref. 073.011page 5491011Ref. 068.701page 56121314

123TORQUE WRENCHES "CLICK" TYPECharacteristics of IRIMO torque wrenches and screwdrivers:• Traceable calibration certificate which guarantees accuracy of the tool.• Superior accuracy than required by ISO 6789 - UNE EN 26789.• Guaranteed minimum accuracy between 20 and 100% of the nominal capacity• Scale of great visibility.• Individual serial number.• Automatic reset• Ratchets and reduced heads for improving accessibility.• Reduced weight.45As general norm isrecommended to recalibratethese wrenches each 5.000tighten or 12 month of useHIGH RESOLUTION DOUBLESETTING SCALECOMPACTDESIGN± 3% ACCURACY67CLOCKWISETIGHTENINGPOSITIVE "CLICK" CANBE HEARD AND FELTAUTOMATICRESET(ISO 6789)SCALE OFGREAT VISIBILITYSYSTEM OF SECURITYBLOCKINGHIGH PRECISION INTORQUE SETTING8INDIVIDUAL SERIALNUMBERCHROMEDSTEEL BODY9SOCKETLOCKINGMECHANISMREVERSIBLERATCHET1011121314The IRIMO factories have obtainedthe ISO 9001:2000 QualityAssurance Certificate andISO:14001:1996 EnviromentalCertificate52AFTER SALES SERVICEIRIMO has a new Repair and Calibration Center (TS: Technical Support)with 3 people of the highest professional level, that report to the QualityDirector.The main functions of the Repair and Calibration Center (TS) are:- Repair hand tools- Repair and verify pneumatic tools- Repair, Calibration and Verification of torque tools- Hotline for technical questions- Guidance on use and maintenance of tools, machines, etc.For the calibration of torque tools, the TS uses a Snap-on TTC2000torque tester with mechanical loader.This torque tester allows calibrate a torque range between 0,1 Nm and2.711 nm.

TORQUE WRENCHES "CLICK" TYPE1Accuracy ± 3% (ISO 6789)23REF.070.061070.101070.131070.161070.191Desig.-067.091067.111067.121067.131Desig.Lladina-20Lladina-60Lladina-100Lladina-200Lladina-340Nm2-2010-6010-10020-20060-3403/8"3/8"1/2"1/2"1/2"Nm0,10,50,512L355415415510510grs.8001.1001.1001.2501.250432 teeth reversible ratchet. Non reversible wrench. Matt chrome finishing.Supplied in double wall plastic box5Accuracy ±3% clockwise and ±6% counter clockwise (ISO 6789)67REF.Desig.Desig.NmNmLgrs.070.251070.281067.201067.221Lladina-801Lladina-1500150-800300-150032 teeth reversible ratchet (070.251) and 36 teeth (070.281).Reversible. Bright chrome finishing.3/4"1"5101.0801.0804.8507.5008Supplied in double wall plastic box(070.251) or metal box (070.281)9BREAK BACK TORQUE WRENCH10Accuracy: ±4% (ISO 6789)11REF.Desig.NmNmLgrs.12067.181Lladina-800200-800 3/4"101.1406.40048 teeth ratchet head. Reversible.Once torque setting is reached, the wrench breaks back.Supplied in carton box.REF.NR - 12297NR - 12307Square spare partRepair kit131453

TORQUE WRENCHES, INTERCHANGEABLE HEADS54Accuracy ± 3% (ISO 6789)ADJUSTABLESBIT HOLDERSBACBA ScBcA SBASCINTERCHANGEABLE HEADSL181412914 x 18REF.072.121072.181072.361072.411Desig.Nm20-20060-340Nm12L492492grs.1.1001.2009 x 12C5,55,57788,59REF.073.011073.021073.031073.041073.051073.081073.101B17,517,517,517,517,517,517,5A26263030353842S10111213141719grs.40404545506070C99121212131315REF.073.401073.421073.431073.441073.451073.481073.501073.531S1011121314171922A17,218,52021,52327,230,334,5B17,517,517,517,517,517,517,517,5grs.404050505050608014 x 18REF.073.131073.151073.181073.201073.231073.251073.281073.311073.331S131417192224273032A303538425053606666B252525252525252525C789101112131414grs.130130135140170180220240240REF.073.641073.651073.681073.701073.731073.751073.781073.811073.831073.871073.921grs.120120130140145145170180180205235C1111121215151719191920B2525252525252525252525A21,52327,230,534,537,541,545,47,55359S1314171922242730323641REF.073.981grs.320C24,5B27A43S# 1/2"C2424REF.073.961073.971A3333S# 3/8"# 1/2"B17,517,5grs.140150C17B17,5A17SHex 5/6"REF.073.991grs.409 x 12REF.072.021072.051072.081072.211–072.261Desig.Nm2-2010-6010-100Nm0,10,50,5L335335381grs.7208508501413121110987654321

LOW TORQUE, TORQUE WRENCH1Accuracy ± 3% (ISO 6789)2LREF.067.041Desig.Lladina-5Nm.1-5 1/4"- To be used with 1/4” hex bits or 1/4” sockets.- Supplied in a plastic storage case.- Fixed square, no ratchet- Specially suitable for:Automatic gear cases.Fuel injection systems.Electric and electronic assembling industries.NR-28900 SQUARE SPARENm0,1L170grs.12034UNIT CONVERSION TABLE5De ft Ib a N mft Ib01020304050607080901000N m013.5627.1140.6754.2267.7881.3394.89108.45122.00135.561N m1.3614.9128.4742.0255.5869.1482.6996.25109.80123.362N m2.7116.2729.8343.3856.9470.4984.0597.60111.16124.723N m4.0717.6231.1844.7358.2971.8585.4098.96112.51126.074N m5.4218.9832.5446.0959.6573.2086.76100.31113.87127.435N m6.7820.3333.8947.4561.0074.5688.11101.67115.23128.786N m8.1321.6935.2548.8062.3675.9189.47103.03116.58130.147N m9.4923.0536.6150.1663.7177.2790.83104.38117.94131.498N m10.8424.4037.9751.5165.0778.6292.18105.74119.29132.859N m12.2025.7639.3252.8766.4279.9893.54107.09120.65134.20ft Ib x 1.3556 = N mDe ft Ib a m kgft Ib01020304050607080901000m kg01.3832.7664.1495.5326.9158.2989.68111.0612.4513.831m kg0.1381.5212.9044.2875.6707.0538.4369.81911.2012.592m kg0.2771.6603.0434.4265.8097.1918.5749.95711.3412.733m kg0.4151.7983.1814.5645.9477.3308.71310.0911.4812.864m kg0.5531.9363.3194.7026.0857.4688.85110.2311.6213.005m kg0.6912.0743.4574.8406.2237.6068.98910.3711.7513.146m kg0.8302.2123.5964.9796.3627.7459.12810.5111.8913.287m kg0.9682.3513.7345.1176.5007.8839.26610.6512.0313.428m kg1.1062.4893.8725.2556.6388.0219.40410.7912.1713.559m kg1.2452.6284.0115.3946.7778.1599.54310.9212.3113.69ft Ib x 1.383 = m kgDe N m a in ozN m.0.1.2.3.4.5.6.7.8.91.0in oz014.1628.3242.4856.6470.8184.9799.13113.29127.45141.611in oz1.4215.5829.7443.9058.0672.2286.41100.54114.70128.872in oz2.8316.9931.1545.3259.4873.6487.80101.96116.12130.283in oz4.2518.4132.5746.7360.8975.0589.21103.38117.54131.704in oz5.6619.8333.9948.1562.3176.4790.63104.79118.95133.115in oz7.0821.2435.4049.5663.7277.8992.05106.21120.37134.536in oz8.5022.6636.8250.9865.1479.3093.46107.62121.79135.957in oz9.9124.0738.2352.4066.5680.7294.88109.04123.20137.368in oz11.3325.4939.6553.8167.9782.1396.30110.46124.62138.789in oz12.7426.9141.0755.2369.3983.5597.71111.87126.03140.19.01 N m x 141.6112 = .01 in oz67De in Ib a N min Ib01020304050607080901000N m01.132.263.394.525.656.787.919.0410.1711.301N m.1131.242.373.504.635.766.898.029.1510.282N m.2261.362.493.624.755.887.018.149.2710.403N m.3391.472.603.734.865.997.128.259.3810.514N m.4521.582.713.844.976.107.238.369.4910.625N m.5651.702.833.965.096.227.358.489.6110.746N m.6781.812.944.075.206.337.468.599.7210.857N m.7911.923.054.185.316.447.578.709.8310.968N m.9042.033.164.295.426.557.688.819.9411.079N m1.022.153.284.415.546.677.808.9310.0611.19in Ib x .1130 = N mDe N m a ft IbN m01020304050607080901000ft Ib07.3814.7522.1329.5036.8844.2551.6359.0066.3873.761ft Ib0.748.1115.4922.8630.2437.6244.9952.3759.7467.122ft Ib1.488.8516.2323.6030.9838.3545.7353.1060.4867.863ft Ib2.219.5916.9624.3431.7239.0946.4753.8461.2268.594ft Ib2.9510.3317.7025.0832.4539.8347.2054.5861.9669.335ft Ib3.6911.0618.4425.8133.1940.5747.9455.3262.6970.076ft Ib4.4311.8019.1826.5533.9341.3048.6856.0563.4370.817ft Ib5.1612.5419.9127.9934.6742.0449.4256.7964.1771.548ft Ib5.9013.2820.6528.0335.4042.7850.1557.5364.9172.289ft Ib6.6414.0121.3928.7636.1443.5250.8958.2765.6473.021 N m = 0.73756 ft IbDe N m a m kgN m01020304050607080901000m kg01.0202.0393.0594.0795.0996.1187.1388.1589.17710.1971m kg.1021.1222.1413.1614.1815.2006.2207.2408.2609.2792m kg.2041.2242.2433.2634.2835.3026.3227.3428.3629.3813m kg.3061.3262.3453.3654.3855.4046.4247.4448.4649.4834m kg.4081.4282.4473.4674.4875.5066.5267.5468.5659.5855m kg.5101.5302.5493.5694.5895.6086.6287.6488.6679.6876m kg.6111.6322.6513.6714.6915.7106.7307.7508.7699.7897m kg.7141.7332.7533.7734.7935.8126.8327.8528.8719.8918m kg.8161.8352.8553.8754.8955.9146.9347.9548.9739.9939m kg.9181.9372.9573.9774.9976.0167.0368.0569.07510.095N m x .10197 = m kg (ó m kp)89De in oz a N min oz01020304050607080901000N m0.071.141.212.282.353.424.494.565.635.7061N m.007.078.148.219.289.360.431.501.572.6422N m.014.085.155.226.297.367.438.508.579.6503N m.021.092.162.232.304.374.445.515.586.6574N m.028.098.169.240.312.381.452.522.593.6645N m.035.106.177.247.318.388.459.530.600.6716N m.042.113.184.254.325.395.466.537.607.6787N m.049.120.191.261.332.402.473.544.624.6858N m.056.127.198.268.339.409.480.551.621.6929N m.064.134.205.275.346.417.487.558.628.669in oz x .00706 = N mDe N m a in lbN m01020304050607080901000in Ib088.51177.01265.52354.03442.53531.04619.55708.06796.56885.071in Ib8.8597.36185.86274.38362.88451.36539.89628.40716.91805.412in Ib17.70106.21194.72283.22371.73460.24548.74637.25725.76814.263in Ib26.55115.06203.57292.07380.58469.09557.59646.10734.61823.124in Ib35.40123.91212.42300.92389.43477.94566.44654.95743.46831.975in Ib44,25132,76221,27309,77398,28486,79575,30663,80752,31840,826in Ib53.10141.61230.12318.62407.13495.64584.15672.65761.16849.677in Ib61.95150.46238.98327.48415.98504.49592.10681.50770.01858.528in Ib70.81159.31247.82336.33424.83513.34601.85690.35778.86867.379in Ib79.66168.16256.67345.18433.68522.19610.70699.20787.71876.22N m x 8.8507 = in IbDe m kg a ft Ibm kg01020304050607080901000ft Ib072.4144.7217.0289.3361.7434.0506.3578.6651.0723.31ft Ib7,2379,6151,9224,2296,6368,9441,2513,5585,9658,22ft Ib14,4786,8159,1231,5303,9376,1448,4520,8593,1665,43ft Ib21.7094.0166.4238.7311.0383.3455.7528.0600.3672.74ft Ib28.93101.3173.6245.9318.3390.6462.9535.2607.6679.95ft Ib36.17108.5180.8253.2325.5397.8470.1542.5614.8687.16ft Ib43.40115.7188.1260.4332.7405.0477.4549.7622.0694.47ft Ib50.63123.0195.3267.6340.0412.3484.6556.9629.3701.68ft Ib57.86130.2202.5274.9347.2419.5491.8564.2636.5708.89ft Ib65.10137.4209.8284.1354.4426.7499.1571.4643.7716.1m kg x 7.233 = ft Ib1011De m kg a N mm kg01020304050607080901000N m098.07196.13294.20392.27490.33588.40686.47784.53882.60980.671N m9.81107.87205.94304.00402.07500.14598.21696.27794.34892.412N m19.61117.68215.75313.81411.88509.95608.01706.08804.15902.213N m29.42127.49225.55323.62421.69519.75617.82715.89813.95912.024N m39.23137.30235.36333.43431.49529.56627.63725.70823.76921.835N m49.03147.10245.17343.23441.30539.37637.43735.50833.57931.636N m58.84156.90254.98353.04451.11549.17647.24745.30843.37941.447N m68.65166.71264.78362.85460.91558.98657.05755.11853.18951.258N m78.45176.52274.59372.65470.72568.79666.86764.92862.99961.059N m88.26186.33284.40382.46480.53578.60676.66774.73872.79970.86m kg (ó m kp) = 9.80665 N m11111oz. in.lb. in.lb. ft.kgmNmUNIT CONVERSION TABLEounce inchpound inchpound footkilograme metrenewton metreequalsequalsequalsequalsequals0.007060.112981.3569,80.73756NmNmNmNmlb. ft.newton metrenewton metrenewton metrenewton metrepound footThe shadow area indicates the way to find the correspondence. Example: 65 m kg = 470.1/ft Ibkgf.m 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25N.m. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240lb.ft 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180lb.in 0 120 240 360 480 600 720 840 960 1080 1200 1320 1440 1560 1680 1800 1920 2040 216012131455

1TORQUE MULTIPLIERS2Torquemultiplicationratio1:5REF.068.901068.921067.851Max Input Max Out put TorqueTorque Torque MultiplicationNm Nm Ratio Input Output2605401.3002.700DiameterØHeighth5:15:11/2"3/4"3/4”1”108108126129Square output spare / 3/4” for 068.90Kgrs.7,107,1043Calibrationcertificatenot included• Accuracy better than ± 4%• Reaction bar and arm included• Supplied in a double wall plastic storage caseWarning: Torque multipliers, are Torque multipliers, that should be used with torquewrenches even when loosening.If the torque multiplier overloads, the tool can be seriously damaged.Torque multipliers must always be used with torque wrenches.Never use an impact machine or slugging wrench.5Øh678Case 1, 150x200x400 mm.Case 2, 200x250x500 mm.REF.068.701068.711068.931068.941068.761068.961068.791Parmáximoentrada Nm340686801361200240380Max Output TorqueNm1,7001,7003,4003,4006,0006,0009,500AntiTorque Wind-upMultiplica RatchettionRatio 5:1 –25:1 SI5:1 –25:1 SI5:1 –25:1 SI25:1 SIInput3/4"1/2"3/4"1/2"3/4"1/2"3/4"Output1"1"1"1"1. 1 /2"1. 1 /2"1. 1 /2"DiameterØ108108119119144144184Heighth126156143187165226209STANDARD SERIESLenghtI máx.217217264264333333351Casenumber1111222Kgrs.5,27,87,210,014,417,025,7LØ910hLREF.068.511068.531068.541068.551068.571068.581Parmáximoentrada Nm2006060020024080Max Output Torque TorqueNm MultiplicationRatio5:125:11,0001,5003,0003,0006,0006,0005:115:125:175:1AntiWind-upRatchet–SI–SISISIInput1/2"1/2"3/4"1/2"1/2"1/2"Output3/4"1"1"1"1. 1 /2"1. 1 /2"SMALL DIAMETER SERIESDiameterØ7272108108119119Heighth144166190224271301LenghtI máx.143143141141154154Casenumber111111Kgrs.4,14,57,09,014,616,111121314Torque multipliers permit high torque tightenings:• Using low input torque = in an easy and safe way.• In confines spaces: accessibility.Torque multipliers are precision tools that should be used with torque wrenches evenwhen loosening.If the torque multiplier overloads, the tool can be seriously damaged. Product withlimited warranty.FeaturesAccuracy better than ±4%The torque multiplication ratio is the true torque ratio, no the velocity ratio. As anexample, to obtain a torque ratio of 25:1, the velocity ratio can be 29,8:1.The differences are energy losses due to friction.The torque multipliers indicated (see the table) are supplied in a leather carrying case.de cuero de bandolera.Calibration certificate not included.56Anti wind-up ratchet mechanismTorque multipliers with a multiplication ratio of 15:1 or more include an anti wind-upratchet located at the input module.This mechanism helps to contain the reaction that originates at the input, whenremoving the wrench (or ratcheting back) in order to get more of an angle to retighten.The non-existence of such a mechanism makes the use of the multiplier, in somecases, uncomfortable, dangerous or quite simply impossible.The anti-wind-up ratchet mechanism locks the multiplier onto the bolt once torque isapplied. The multipliers can then be used upside down, and will support their ownweight.

BOLTS AND NUTS,PRE-LOAD AND TORQUE DATA57P R O P E R I T Y C L A S S , C O A R S E P I T C H4,8 5,8 6,8 8,8 10,9 12,9Pre-loadNTorqueNmPre-loadNTorqueNmPre-loadNTorqueNmPre-loadNTorqueNmPre-loadNTorqueNmPre-loadNTorqueNmmm 2 .mm.mm.mm.resistent areafrictioncoefficientM2M2,5M3M3,5M4M5M6M7M8M10M12M14M16M18M20M22M24M27M30M33M36M39M42M45M48M52M56M60M64M680,400,450,500,600,700,801,001,001,251,501,752,002,002,502,502,503,003,003,503,504,004,004,504,505,005,005,505,506,006,00455,567810111316182124273034364146505560657075808590951001,522,5-345-681012141417171919222427-32-36-41-46-2,073,395,036,788,7814,2020,1028,9036,6058,0084,30115,00157,00192,00245,00303,00353,00459,00561,00694,00817,00976,001.120,001.310,001.470,001.760,002.030,002.360,002.680,003.060,000,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,140,100,14448,0449,5813,5749,91.219,91,125,91,638,21,511,32,115,41,950,93.461,63.196,84.874,74.499,17.134,56.599,68.947,18.265,614.244,513.167,420.766,619.204,028.389,926.261,239.242,136.364,247.533,043.986,161.238,056.747,176.305,270.791,988.232,481.761,8115.778,8107.441,5140.999,5130.770,6175.618,1163.058,0206.081,7191.241,8247.520,0229.902,6283.225,0262.939,0332.751,5309.151,8372.429,3345.862,9448.108,9416.499,0516.202,9479.683,4602.498,5560.267,5683.339,5635.299,9782.799,9728.201,80,150,190,310,380,540,600,841,031,251,532,463,024,245,196,978,6010,2012,5420,1124,7634,4342,4254,7767,5685,14105,80117,48145,16166,08206,39227,22283,79287,16356,84420,04525,08572,83714,49774,65970,43998,601.248,411.291,811.620,961.601,252.005,462.005,512.519,552.406,513.018,113.099,963.900,523.838,144.824,404.754,645.992,715.746,177.235,136.939.648.758,24610,6561,91.016,9937,41.524,91.407,42.047,81.889,22.644,32.438,74.327,03.996,06.093,45.623,98.918,28.249,511.183,910.332,017.805,616.459,225.958,324.005,035.487,432.826,549.052,745.455,359.416,354.982,776.547,570.933,995.381,588.489,8110.290,5102.202,2144.723,5134.301,9176.249,4163.463,3219.522,6203.822,5257.602,2239.052,3309.400,0287.378,3354.031,2328.673,8415.939,4386.439,7465.536,6432.328,7560.136,1520.623,8645.253,6599.604,2753.123,1700.334,4854.174,4794.124,9978.499,8910.252,20,190,230,390,480,680,831,051,281,561,913,083,785,306,488,7110,7612,7515,6725,1430,9543,0353,0368,4684,45106,43132,26146,85181,45207,61257,98284,02354,74358,94446,05525,05656,35716,03893,11968,321.213,031.248,251.560,511.614,772.026,202.001,572.506,832.506,893.149,433.008,143.772,643.874,954.875,654.797,686.030,505.943,307.490,887.182,719.043,928.674,5510.947,80732,7674,31.220,21.124,91.829,91.688,92.457,32.267,03.173,12.926,45.192,34.795,27.312,16.748,610.701,89.899,413.420,712.398,421.366,819.751,131.149,928.806,042.584,939.391,858.863,254.546,371.299,665.979,291.857,085.120,6114.457,8106.187,8132.348,6122.642,7173.668,2161.162,2211.499,3196.155,9263.427,1244.587,0309.122,6286.862,7371.279,9344.853,9424.837,4394.408,5499.127,3463.727,7558.644,0518.794,4672.163,4624.748,5774.304,4719.525,1903.747,8840.401,21.025.009,0952.949,81.174.200,01.092.303,00,230,280,470,580,821,001,261,541,882,293,704,536,357,7810,4512,9015,3018,8030,1637,1451,6463,6382,15101,34127,72158,71176,22217,74249,13309,58340,82425,69430,73535,26630,06787,62859,241.071,731.161,981.455,641.497,891.872,611.937,722.431,442.401,883.008,203.008,263.779,323.609,774.527,174.649,935.850,785.757,217.236,607.131,968.989,068.619,2510.852,7010.409,4613.137,36976,9899,01.627,01.499,82.439,92.251,93.276,43.022,64.230,83.901,96.923,16.393,79.749,48.998,214.269,113.199,217.894,216.531,228.489,026.334,841.533,238.408,056.779,852.522,478.484,372.728,595.066,187.972,3122.476,0113.494,2152.610,4141.583,7176.646,9163.523,6231.557,6214.883,0281.999,0261.541,2351.236,2326.115,9412.163,5382.483,6495.039,9459.805,2566.449,9525.878,0665.503,0618.303,6744.858,6691.725,8896.217,8832.998,01.032.406,0959.366,81.204.997,01.120.535,01.366.679,01.270.600,01.565.600,01.456.404,00,310,370,630,771,091,341,682,052,503,064,936,048,4710,3713,9417,2120,4125,0740,2249,5268,8684,84109,53135,13170,29211,61234,96290,32332,17412,78454,43567,58574,31713,68840,081.050,161.145,651.428,971.549,311.940,861.997,192.496,812.583,633.241,923.202,514.010,934.011,025.039,094.813,036.036,236.199,917.801,047.676,299.648,809.509,2811.985,4211.492,3414.470,2713.879,2817.516,481.373,81.264,32.288,02.109,13.431,03.166,74.607,54.250,65.949,65.487,09.735,78.991,113.710,112.653,720.065,918.561,425.163,723.247,040.062,737.033,358.406,154.011,279.846,673.859,6110.368,5102.274,4133.686,7123.711,0172.231,9159.601,2214.608,3199.102,1248.153,7229.955,1325.627,9302.179,2396.561,1367.792,3493.925,8458.600,5579.604,8537.867,6696.149,8646.601,0796.570,1739.516,0935.863,6869.489,31.047.457,0972.739,41.260.306,01.171.404,01.451.821,01.349.110,01.694.527,01.575.752,01.921.892,01.786.781,02.201.625,02.048.068,00,430,520,881,081,531,882,362,893,524,306,938,5011,9214,5919,6024,2028,7035,2656,5669,6496,83119,31154,03190,02239,47297,58330,41402,26467,11580,47639,05798,16807,631.003,611.181,361.476,791.611,082.009,492.178,722.729,332.808,553.511,143.633,234.558,964.503,535.640,375.640,507.086,236.768,328.488,458.718,6310.970,2110.794,7813.568,6313.372,4316.854,4916.161,1020.348,8219.517,7424.632,551.648,61.517,12.745,62.531,04.117,23.800,05.528,95.100,77.139,56.584,411.682,810.789,316.452,215.184,424.079,122.273,630.196,527.896,548.075,344.439,970.087,364.813,595.816,088.631,5132.442,2122.729,3160.424,1148.453,2206.678,2191.521,5257.530,0238.922,5297.784,4275.946,1390.753,4362.615,0475.873,4441.350,8592.711,0550.320,6695.525,8645.441,1835.379,8775.921,3955.884,2887.419,21.123.036,01.043.387,01.256.949,01.167.287,01.512.368,01.405.684,01.742.185,01.618.931,02.033.432,01.890.903,02.306.271,02.144.137,02.641.950,02.457.681,00,520,631,061,301,842,262,843,474,225,168,3210,2014,3017,5123,5229,0434,4442,3167,8783,56116,20143,17184,84228,03287,36357,09396,49489,92560,54696,56766,85957,80969,151.204,331.417,631.772,151.933,292.411,392.614,463.275,193.370,264.213,374.359,885.470,755.404,236.768,446.768,608.503,478.121,9810.186,1410.462,3613.164,2512.953,7316.282,3616.046,9120.225,3919.393,3224.418,5823.421,2929.559,06MSScoarse pitch1141312111098765324

123456789101112131458

12345678Ref. 109.541 1/4” 3/8” 1/2” 3/4” 1”page 60 64 68 75 784 SOCKETS,ACCESSORIESAND SETSRef. 166.051 1/2” 3/4” 1”page 83 86 88910Ref. 125.001 1/4” 3/8” 1/2” 3/4” 1”page 61 65 69 75 78Ref. 109.541 1/4” 3/8” 1/2”page 90 91 9211Ref. 129.061 1/4” 3/8” 1/2” 3/4” 1”page 63 67 72 77 79Ref. 167.081 3/8” 1/2” 3/4” 1” 1.1/2”page 80 82 85 87 89Ref. 169.101 3/8” 1/2” 3/4” 1” 1.1/2”page 81 84 86 88 89Ref. 472.011 10 mm.page 94Ref. 471.161page 95121314

1SOCKETS 1 /4”2UNE 16507 ISO 2725 DIN 31243SSAC41/4"6,3 mm.ABLCSBLDEEP SERIESHEX.BIHEX.HEX.567REF.101.021101.031101.041101.051101.061101.071101.081101.091101.101101.111101.121101.131101.141HEX.REF.102.041102.051102.061102.071102.081102.091102.101102.111102.121102.131102.141S44,555,567891011121314A6,87,48,18,79,310,811,913,414,515,916,918,019,6B6,57,57,58,08,08,08,08,09,011,511,511,511,5C11,911,911,911,911,911,911,912,413,014,115,015,616,0L24,724,724,724,724,724,724,724,724,724,724,724,724,7grs.14141414141414141418182323u.1111111111111REF.103.021103.031103.041103.051103.061103.071103.081103.091103.101103.111103.121103.131103.141S44,555,567891011121314A6,87,48,18,79,310,811,913,414,515,916,918,019,6B6,57,58,59,59,515,515,515,515,519,519,519,519,5C11,911,911,911,911,911,911,913,414,515,916,918,019,6L50505050505050505050505050grs.20202020202525303540404550u.111111111111189REF.101.581101.591101.601101.611101.621101.631101.641101.651101.661101.681101.701101.711S1/85/323/167/321/49/325/1611/323/87/161/29/16A6,26,87,98,99,911,011,913,014,515,917,619,6B2,56,57,58,08,08,08,08,09,011,511,511,5C11,911,911,911,911,911,911,913,014,515,917,619,6L252525252525252525252525grs.101010101012121515202528u.111111111111101112SOCKET RAIL SETSSOCKET RAIL SETSHEX.BIHEX.HEX.1314REF.109.541–REF.–109.641TypestandardstandardLength.22,222,2Nº Pcs.1311Contents4 - 4,5 - 5 - 5,5 -6 - 7 - 8 - 9 - 10 -11 - 12 - 13 - 145 - 5,5 - 6 - 7 - 8 -9 - 10 - 11 - 12 -13 - 14grs.275255REF.109.551TypelargoLength.50,8Nº Pcs.8Contents6 - 7 - 8 - 9 - 10 -11 - 12 - 13grs.38560

1 / 4” TORX® SOCKETS12ALCSSOCKET RAIL SETS3REF.106.041106.051106.061106.071106.081106.101E-4E-5E-6E-7E-8E-10A5,46,77,78,39,611,3S3,84,75,76,27,59,4C121212121212L252525252525grs.101010101010u.111111REF.106.201SE-4, E-5, E-6, E-7, E-8, E-10grs.115u.141/4” ACCESSORIESUNE 16511ISO 3316AL56ABLREF.LABgrs.EXTENSIONu.REF.LWOBBLE PLUS EXTENSIONAgrs.u.7105.011105.001105.021501001501212127,87,87,8244965111105.111105.131UNE 16512ISO 33155015012,312,324651189BALFLEXIBLE EXTENSIONABCLSLIDING “T” HANDLE10REF.LABgrs.u.REF.ABCLgrs.u.105.041 14812,58571105.0811462311544111UNE 16511ISO 3316UNE 16520ISO 8764DIN 526212LUNIVERSAL JOINTALL 1SCSPINNER “T” HANDLE13REF.ALgrs.u.REF.SCL1Lgrs.u.105.2511434201105.2211/4”105 441054011461

1ACCESSORIES 1/ 4”2UNE 16512ISO 33153BLAC72 TEETH REVERSIBLE RATCHET1/4” REVERSIBLE RATCHETREF.ABCLgrs.u.REF.ABCLgrs.u.4105.501105.71125 23 21 122 150Repair Kit (Square, Pawl, Spring, Cover, Screw)11105.061105.71125 23 21 122 110Repair Kit (Square, Pawl, Spring, Cover, Screw)1156REF.AB36 TEETH REVERSIBLE RATCHETCLgrs.u.REF.AQUICK RELEASE RATCHET 36 TEETHBCLgrs.u.105.551105.72125 23 20 122Repair Kit15011105.561105.73125 25 20 122Repair Kit150117UNE 16503ISO 1174UNE 16503ISO 1173ISO 11748INCREASING ADAPTOR 1 /4” - 3 /8”ALHEX BIT HOLDER 1 /4”ALREF.ALgrs.u.REF.ALgrs.u.9105.60112,7 24131105.70112 25131LE10DFLAT ADAPTORFLAT ADAPTOR SET11REF.105.611 1/4” 3/8”E3,3D L29 13grs.20u.1REF.109.6111/4”3/8”1/2”3/8”1/2”3/4”grs.105u.112UNE 16512ISO 331513SPINNER HANDLEALREF.ABLgrs.u.14105.201608155115162

1/4” SOCKET SETS11/4"6,3 mm.23Double wall plastic box, 205 x 130 x 45 mm.Double wall plastic box, 205 x 130 x 45 mm.4REF.DesignationTypeRatchetNº Pcs.grs.REF.DesignationTypeRatchetNº Pcs.grs.109.051109.071109.091Jullavaso 014Jullavaso 014PHexHex105.501105.551323232Jullavaso 014Q Hex 105.56113 hex socket 4- 4,5- 5- 5,5- 6- 7- 8- 9- 10- 11- 12- 13- 143 bits ph1- ph2- ph33 bits pz1- pz2- pz33 plain slot bits 0,5x4 - 0,8x5,5 - 1,2x6,54 hex bits 3 - 4 - 5 - 61 spinner handle 105.2011 universal joint 105.2511 extension 50 mm 105.0111 extension 150 mm 105.0211 bit holder hex de 1/4” 105.701725725725109.041109.061109.081Jullavaso 013Jullavaso 013PHexHex105.501105.551191919Jullavaso 013Q Hex 105.5613hex socket 4- 4,5- 5- 5,5- 6- 7- 8- 9- 10- 11- 12- 13- 141 spinner handle 105.2011 universal joint 105.2511 extension 50 mm 105.0111 extension 150 mm 105.0211 sliding “t” handle 105.08167567567556REF.109.141REF.109.261Designation Type Nº Pcs.Jullavaso 025 Bihex3011 vasos bihex 5- 5,5- 6- 7- 8- 9- 10- 11- 12- 13- 143 bits ph1- ph2- ph33 bits pz1- pz2- pz33 plain slot bits 0,5x4 - 0,8x5,5 - 1,2x6,54 hex bits 3 - 4 - 5 - 61 ratchet 105.5011 spinner handle 105.2011 universal joint 105.2511 extension 50 mm 105.0111 extension 150 mm 105.0211 bit holder 105.701Designation Type Nº Pcs.Jullavaso 054 Hex3112hex socket 1 /8 - 5 /32 - 3 /16 - 7 /32 - 1 /4 - 9 /32 - 5 /16 -11/32 - 3 /8 - 7 /16 - 1 /2 - 9 /163 bits ph1- ph2- ph33 bits pz1- pz2- pz33 plain slot bits 0,5x4 - 0,8x5,5 - 1,2x6,54 hex bits 3 - 4 - 5 - 61 ratchet 105.0611 spinner handle 105.2011 universal joint 105.2511 extension 50 mm 105.0111 extension 150 mm 105.0211 bit holder 105.701grs.725grs.725REF.109.131REF.109.251Designation Type Nº Pcs.Jullavaso 024 Bihex1711 vasos bihex 5- 5,5- 6- 7- 8- 9- 10- 11- 12- 13- 141 ratchet 105.0611 spinner handle 105.2011 universal joint 105.2511 extension 50 mm 105.0111 extension 150 mm 105.0211 sliding “t” handle 105.081DesignationType Nº Pcs.Jullavaso 053 Hex1812hex socket 1 /8 - 5 /32 - 3 /16 - 7 /32 - 1 /4 - 9 /32 - 5 /16 -11/32 - 3 /8 - 7 /16 - 1 /2 - 9 /161 ratchet 105.0611 spinner handle 105.2011 universal joint 105.2511 extension 50 mm 105.0111 extension 150 mm 105.0211 sliding “t” handle 105.081grs.675grs.675789101112New wave-shape, NPP, which appliestorque to the nut sides withoutdamaging the weaker nut corners.131463

3 / 8” SOCKETS64UNE 16507 ISO 2725 DIN 31243/8"10 mm.SACLBu.11111111111111111grs.1414141414142727272727274159597272L25,525,525,525,525,525,525,525,527,027,027,027,027,029,029,029,031,0C1717171717171717191920202021242426B77888899131313131314141416A9,310,911,813,414,615,917,018,419,620,922,023,424,525,626,827,929,6S678910111213141516171819202122HEXREF.112.261112.271112.281112.291112.301112.311112.321112.331112.341112.351112.361112.371112.381112.391112.401112.411112.421BIHEXREF.112.061112.071112.081112.091112.101112.111112.121112.131112.141112.151112.161112.171112.181112.191112.201112.211112.221REF.112.621112.641112.661112.681112.701112.711112.731112.751112.761112.781112.791BIHEXS1/45/163/87/161/29/165/811/163/413/167/8A10,011,814,316,018,420,222,023,925,627,930,0B78889131313141416C17,017,017,017,018,420,222,023,925,627,930,0L2626262626272727292931grs.1414141427272741597272u.11111111111SSALBCDEEP SERIESu.1111111111111grs.48484848484848688594104132132L64646464646464646464646464C17,017,017,017,017,017,018,419,620,922,023,424,525,6B12141525252525252525252525A10,911,813,414,615,917,018,419,620,922,023,424,525,6S78910111213141516171819HEXREF.113.071113.081113.091113.101113.111113.121113.131113.141113.151113.161113.171113.181113.191REF.119.541HEX119.641BIHEXREF.TypestandardNº Pcs.8Contents8-10 -11-12-13-14-17-19grs.309SOCKET RAIL SETSSOCKET RAIL SETSgrs.644Contents8-10 -11-12-13-14-17-19Nº Pcs.8TypelargoREF.119.551HEXSOCKET RAILgrs.60100Number of clips1017L2404003/83/8REF.RAT113RAT1141413121110987654321

3 / 8” TORX ® SOCKETS12S ACLFEMALE TORX ®TORX ® SOCKET SETS3REF.112.881112.901112.911112.921112.941112.961112.981E-8E-10E-11E-12E-14E-16E-18A10,212,313,314,315,819,621,0S7,59,41011,112,914,716,6C17171717172021L31313131313131ACCESSORIES 3/8”grs.36374041414450u.1111111REF. Nº Pcs.Contents119.311 7E8 - E10 - E11 - E12 - E14 - E16 -E18"Torx ® is the registered trademark of Camcar Division of Textron Inc."grs.31545UNE 16511ISO 33166ALBAL7EXTENSIONSWOBBLE PLUS EXTENSIONREF.115.011115.071115.041L75150250A181818B11,511,511,5grs.83150269u.111REF.115.111115.171L75150A17,817,8grs.70135u.118UNE 16511ISO 33169LAAL10LOCKING EXTENSIONUNIVERSAL JOINTREF.115.211L150A17,8grs.135u.1REF.115.251AL19 50grs.57u.111UNE 16512ISO 331512BASLIDING “T” HANDLELC13REF.ABCLgrs.u.115.08122113220019011465

1ACCESSORIES 3 /8”2UNE 16512ISO 3315UNE 16512ISO 33153BALCBALC72 TEETH REVERSIBLE RATCHET REVERSIBLE RATCHET4REF.115.501A29B30C24L197grs.230115.701 Repair Kit (Square, Pawl, Spring, Cover, Screw)u.1REF.115.551A31B26C24L200grs.2351 115.721 Repair Kit (Square, Pawl, Spring, Cover, Screw)u.15UNE 16512ISO 33156BCALL'SWIVEL HANDLEQUICK RELEASE RATCHET 36 TEETHREF.ABCLL’grs.u.REF.ABCLgrs.u.7115.4211612291802002651115.561115.731312928 200Kit de reparación23511UNE 16503ISO 11748AL9REF.115.751 5/16”A175/16” HEX BIT HOLDERL grs. u.28 32 1LE10UNE 16503ISO 1174FLAT ADAPTORDREF.EDLgrs.u.11Due to the special workingconditions of this adaptor,it is not guaranteed againtsmale failure.AL3/8” TO 1 /4” REDUCING ADAPTOR115.611 3/8” 1/2”3,23816251REF.ALgrs.u.12115.651UNE 16503ISO 117416,528,525113AL3/8” TO 1 /2” INCREASING ADAPTORREF.FLAT ADAPTOR SETgrs.u.14REF.115.601A22L38grs.50u.1109.611 1/4”3/8”1/2”3/8”1/2”3/4”100166

3 / 8” SOCKETS SETS13/8"10 mm.23Metal box, 310 x 120 x 46 mm.Metal box, 345 x 155 x 46 mm.4REF.119.001119.051119.041119.071Desig.Jullavaso 104“ 114“ 104 P“ 114 PTypeHexBihexHexBihexRatchet115.501115.501115.551115.55112 sockets: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 191 universal joint 115.2511 EXTENSION 75 mm 115.011REF.119.251Desig.Jullavaso 154TypeBihexNº Pcs.1411 sockets: 1/4 - 5 /16 - 3 /8 - 7 /16 - 1 /2 - 9 /16 - 5 /8 - 11 /16 -3/4 - 13 /16 - 7 /81 Ratchet 115.5011 universal joint 115.2511 EXTENSION 75 mm 115.011Nº Pcs.15151515grs.1.6001.6001.6101.610grs.1.620REF.119.081119.061119.091119.101Desig.Jullavaso 105Jullavaso 115Jullavaso 105 PJullavaso 115 PTypeHexBihexHexBihexRatchet115.501115.501115.551115.551Nº Pcs.22222222119.111 Jullavaso 105 Q Hex 115.561 2217 sockets: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 221 universal joint 115.2511 EXTENSION 75 mm 115.0111 EXTENSION 275 mm. 115.0411 sliding “T” handle 115.081grs.2.5102.5102.5202.5202.520567891011Double metal box, 280 x 190 x 55 mm.Double metal box, 280 x 190 x 55 mm.REF.119.601119.701Desig.Jullavaso 160Jullavaso 170TypeHexBihexNº Pcs.2222grs.1.9501.95017 sockets: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 -18 - 19 - 20 - 21 - 221 Ratchet 115.5011 universal joint 115.2511 EXTENSION 75 mm 115.0111 EXTENSION 275 mm. 115.0411 sliding “T” handle 115.081REF.119.611119.711119.741Desig.Jullavaso 160 PJullavaso 170 PJullavaso 170 QTypeHexBihexBihexRatchet115.551115.551115.561Nº Pcs.22222217 sockets: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 -18 - 19 - 20 - 21 - 221 Ratchet 115.5511 universal joint 115.2511 EXTENSION 75 mm 115.0111 EXTENSION 275 mm. 115.0411 sliding “T” handle 115.081grs.1.9601.9601.96012131467

1/ 2” SOCKETS68UNE 16507ISO 2725DIN 31241/2"12,5 mm.SSACLBu.101010101010101010101010101010555555555grs.525252546161616371626471838099105105110120120135145155180L383838383838383838383838383841414141444444444444C222222222222222223232425262626262628303032343436B101112121212131313131818181821212121232324242424A131415171819202223242527282930313233353638394042S8910111213141516171819202122232425262728293032REF.122.081122.091122.101122.111122.121122.131122.141122.151122.161122.171122.181122.191122.201122.211122.221122.231122.241122.251122.261122.271122.281122.291122.301122.321BIHEXREF.121.081121.091121.101121.111121.121121.131121.141121.151121.161121.171121.181121.191121.201121.211121.221121.231121.241121.251121.261121.271121.281121.291121.301121.321HEXu.111111111111111111grs.5252605962726472788097100120125125140160185REF.122.661122.681122.701122.711122.721122.731122.751122.761122.771122.781122.791122.801122.811122.821122.831122.841122.851122.861BIHEXS3/87/161/29/1619/325/811/163/425/3213/167/815/1631/3211. 1 /161. 1 /81. 3 /161. 1 /4A151719212223252728293032333436384042B121212131313131818182121212123242424C222222222223232526262626283030323436L383838383838383838384141414144444444REF.129.701HEXREF.129.801BIHEXgrs.800Contents10 -11-13-14-15-16-17-19-20-22Nº Pcs.10TypestandardSOCKET RAIL SETSSSALBCDEEP SERIEu.1111111111111111grs.150150150150150150150165165180210235250338495540L77777777777777777777777777777777C22,022,022,022,022,021,622,924,125,426,528,529,932,036,039,842,0B25252525253030303030353535353535A15,416,617,919,120,421,622,924,125,426,528,529,932,036,039,842,0S10111213141516171819212224273032REF.124.101124.111124.121124.131124.141124.151124.161124.171124.181124.191124.211124.221124.241124.271124.301124.321BIHEXSOCKET RAIL SETSNew wave-shape, NPP, whichapplies torque to the nut sideswithout damaging the weakernut corners.grs.1.755Contents10-13-14-17-19-21-22-24-27Nº Pcs.9TypelargoREF.129.821BIHEXSOCKET RAILgrs.60100L2404001/21/2REF.RAT111RAT112Number of clips8141413121110987654321

TORX ® SOCKETS 1/2”1UNE 16519ISO 2936DIN 9112REF.126.101126.111126.121126.141126.161126.181126.201126.241E-10E-11E-12E-14E-16E-18E-20E-24S9,410,011,112,914,716,618,422,1A12,313,314,315,819,621,023,028,0C2323232323232328L4040404040404040Agrs.50505050656575120Lu.11111111CSREF.126.501REF.126.511Nº Pcs.6Nº Pcs.8ContentsE-12, E-14, E-16E-18, E-20, E-24ContentsE-10, E-11, E-12, E-14,E-16, E-18, E-20, E-24L260L260grs.460grs.560TORX®u.1TORX®u.14356ACCESSORIES 1/2”UNE 16511ISO 3316A1/2"12,5 mm.LBAL78EXTENSIONWOBBLE PLUS EXTENSIONREF.125.001125.011125.021L75125250A232323B141414grs.110170315u.555REF.127.001127.011127.021L75125250A242424grs.150210360u.111910UNE 16511ISO 3316A11ALLREF.LALOCKING EXTENSIONgrs.u.REF.ALUNIVERSAL JOINTgrs.u.12127.111125242351125.25125681505131469

1ADAPTORS 1 /2”2LEUNE 16503ISO 1174DAL3REF.EDFLAT ADAPTORL grs. u.REF.AL5/16” HEX BIT HOLDERgrs.u.125.6111/2” 3/4” 3,24422551125.75118385014UNE 16503ISO 1174UNE 16503ISO 11745AA6REF.A1/2 TO 3 /4” INCREASING ADAPTORLgrs.u.LDue to the special working conditions of this adaptor, it is notLguarantead against male square failure.1/2” TO 3 /8” REDUCING ADAPTORREF.ALgrs.u.125.60125461101125.651234063178UNE 16512ISO 33151/2" ACCESORIESUNE 16512ISO 33159BECBAA10SLIDING “T” HANDLELCSPEED BRACELREF.ABCLgrs.u.REF.ABCELgrs.u.11125.081251342 2803705125.35122121251104235351UNE 16512ISO 3315UNE 16512ISO 33151213BALOFFSET HANDLECSWIVEL HANDLESLL'BAREF.ABLgrs.u.REF.L’LABCgrs.u.14125.48145 131802151125.421125.4312543812343613535121240404807405570

NEW RATCHET HANDLES1The Rudolit assures a perfecthandle-body assenbly.2The elastomerguarantees a firm gripthanks to the adherenceof the material.3The ergonomic design allowsmaximum performance with aminimum effort.4The greater legth ofhandle allowsplacing the wholehand withonttouching metallicparts.The hole on the handleallows hanging the tool eitherat the point of sale or at atool cabinet.567UNE 16512ISO 33151/2"12,5 mm.8BLREF.AB72 TEETH REVERSIBLE RATCHETCLgrs.u.9AC125.501125.70139 41 30 251 614Repair Kit (Square, Pawl, Spring, Cover, Screw)1110UNE 16512ISO 3315Socketlocking deviceQuick releasebutton11BB12ACACREVERSIBLE RATCHETLQUICK RELEASE RATCHETL13REF.ABCLgrs.u.REF.ABCLgrs.u.125.551125.72135 4234 268KIT REP6141125.561125.711354234 268KIT REP61411471

11 / 2” SOCKET SETS21/2"12,5 mm.354Metal box, 310 x 130 x 50 mm.REF.129.001129.101DesignationJullavaso 232Jullavaso 242TypeHexBihexNº Pcs.131312 sockets:10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 221 ratchet 125.501grs.2.2902.290Metal box, 450 x 200 x 50 mm.REF.129.061129.161DesignationJullavaso 213Jullavaso 223TypeHexBihexNº Pcs.262620 sockets: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 -20 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 30 - 321 ratchet 125.5011 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.2511 speed brace 125.351grs.5.4905.49067Metal box, 440 x 200 x 50 mm.Metal box, 310 x 130 x 50 mm.8910REF. Designation Type Nº Pcs.129.031 Jullavaso 212 Hex18129.131 Jullavaso 222 Bihex1813 sockets:10 - 11 - 12 - 13 - 14 - 15 - 17 - 19 - 22 - 24 -27 - 30 - 321 ratchet 125.5011 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.251grs.4.2004.200REF. Designation Type Nº Pcs.129.401129.501Jullavaso 233Jullavaso 243HexBihex161613 sockets: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 -20 - 21 - 221 ratchet 125.5011 extension 250 mm. 125.0211 sliding “T” handle 125.081REF. Designation Type Nº Pcs.129.351 Jullavaso 264 Bihex1411 sockets: 3/8 - 7 /16 - 1 /2 - 9 /16 - 5 /8 - 11 /16 - 3 /4 - 13 /16 - 7 /8 -15/16 - 1"1 ratchet 125.5011 extension 250 mm. 125.0211 sliding “T” handle 125.081grs.3.0903.090grs.2.9451112Metal box, 440 x 200 x 50 mm.REF.DesignationTypeNº Pcs.grs.Metal box, 445 x 225 x 50 mm.REF.DesignationTypeNº Pcs.grs.1314129.411 Jullavaso 212 P Hex18129.511 Jullavaso 222 P Bihex1813 sockets:10 - 11 - 12 - 13 - 14 - 15 - 17 - 19 - 22 - 24 -27 - 30 - 321 ratchet 125.5511 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.2514.2104.210129.091129.191Jullavaso 216Jullavaso 226HexBihex252520 sockets: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 -20 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 30 - 321 ratchet 125.5011 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.2514.8504.85072

1 / 2” SOCKET SETS11/2"12,5 mm.23Metal box, 440 x 200 x 50 mm.Metal box, 450 x 200 x 50 mm.REF. Designation Type Nº Pcs.129.481 Jullavaso 212 Q Hex1813 sockets:10 - 11 - 12 - 13 - 14 - 15 - 17 - 19 - 22 - 24 -27 - 30 - 321 ratchet 125.5611 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.251grs.4.210REF. Designation Type Nº Pcs.129.111 Jullavaso 216 Q Hex2520 sockets: 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 -20 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 30 - 321 ratchet 125.5611 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.251grs.4.8504567Double wall plastic box, 430 x 240 x 65 mm.Double wall plastic box, 430 x 240 x 65 mm.REF.DesignationTypeNº Pcs.129.051 Jullavaso 217 Hex27129.151 Jullavaso 227 Bihex2722 sockets: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 30 - 321 ratchet 125.5011 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.251grs.4.9604.960REF. DesignationType Nº Pcs.129.471129.571Jullavaso 217 PJullavaso 227 PHexBihex272722 sockets: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 30 - 321 ratchet 125.5511 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.251grs.4.9704.970891011Double wall plastic box, 430 x 240 x 65 mm.REF.DesignationTypeNº Pcs.grs.Metal box, 440 x 210 x 50 mm.REF.DesignationTypeNº Pcs.grs.12129.491129.591Jullavaso 217 QJullavaso 227QHexBihex272722 sockets: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 - 24 - 26 - 27 - 28 - 30 - 321 ratchet 125.5611 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.2514.9704.970129.391 Jullavaso 263 P Bihex2418 sockets: 3/8 - 7 /16 - 1 /2 - 9 /16 - 19 /32 - 5 /8 - 11 /16 - 3 /4 - 25 /32 -13/16 - 7 /8 - 15 /16 - 31 /32 - 1" - 1. 1 /16 - 1. 1 /8 -1. 3 /16 - 1. 1 /41 ratchet 125.5511 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.2511 speed brace 125.3515.600131473

11 / 2” SOCKET SETS21/2"12,5 mm.3Metal box, 440 x 200 x 50 mm.Metal box, 440 x 200 x 50 mm.54REF.129.441DesignationJullavaso 219 FPTypeHexNº Pcs.26grs.4.60014 sockets: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 228 combination wrenches: 6-7, 8-9, 10-11, 12-13, 14-15, 16-17, 18-19, 20-221 ratchet 125.5511 extension 125 mm. 125.0111 extension 250 mm. 125.0211 universal joint 125.251REF.129.551DesignationJullavaso 240 CTypeBihexNº Pcs.2614 sockets: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 228 combination wrenches: 8 - 10 - 11 - 12 - 13 - 14 - 17 - 191 ratchet 125.5011 extension 125 mm. 125.0111 extension 250 mm. 125.0211 universal joint 125.251grs.4.49067Metal box, 440 x 210 x 50 mm.89REF.DesignationTypeNº Pcs.129.361 Jullavaso 263 Bihex2418 sockets: 3 /8 - 7 /16 - 1 /2 - 9 /16 - 19 /32 - 5 /8 - 11 /16 - 3 /4 - 25 /32 -13/16 - 7 /8 - 15 /16 - 31 /32 - 1" - 1. 1 /16 - 1. 1 /8 -1. 3 /16 - 1. 1 /41 ratchet 125.5011 extension 125 mm. 125.0111 extension 250 mm. 125.0211 sliding “T” handle 125.0811 universal joint 125.2511 speed brace 125.351grs.5.59010EXPOSITORES 1/2”111213REF.910.011910.721910.801Nº Pcs.1202ContentsDispenser empty mm.HEX202BIHEX12 sockets 10 - 11 - 12 - 13 - 14 - 1511 sockets 16 - 1710 sockets 18 - 199 sockets 20 - 218 sockets 22 - 23 - 247 sockets 26 - 27 - 286 sockets 29 - 30 - 327 ratchets 250 mm Cód. 125.501grs.5.45027.45027.45014308 x 300 x 42574

3/ 4” SOCKET SETS1UNE 16507 ISO 2725 DIN 31243/4"20 mm.2SSABLCNPP Profile that movestensions away towardsthe flanks and avoidswearing the edges.3HEXREF.BIHEXREF.SABCLgrs.u.BIHEXREF.SABCLgrs.u.4131.191131.221131.231131.241131.251131.261131.271131.281131.291131.301131.321131.331131.341131.351131.361131.381131.401131.411131.421131.461131.501131.551131.601132.191132.221132.231132.241132.251132.261132.271132.281132.291132.301132.321132.331132.341132.351132.361132.381132.401132.411132.421132.461132.501132.551132.601192223242526272829303233343536384041424650556033,036,036,036,035,036,036,036,038,038,038,038,038,042,042,045,045,045,045,048,048,048,048,0141414171717222222242626262628283030303436404229,232,233,234,236,037,038,039,540,542,044,046,047,048,050,052,054,056,057,062,068,074,080,050,050,050,051,052,052,052,052,052,054,056,056,056,058,058,060,062,064,064,068,072,076,078,01852102202202452552502552752753103303804204304605105505407407751.1301.32011111111111111111111111132.791132.801132.821132.831132.841132.851132.861132.871132.881132.891132.901132.911132.921132.931132.941132.951132.961132.971132.981132.991132.7717/815/1611. 1 /161. 1 /81. 3 /161. 1 /41. 5 /161. 3 /81. 7 /161. 1 /21. 5 /81. 11 /161. 3 /41. 13 /161. 7 /822. 1 /162. 1 /82. 1 /42. 3 /83234373840424446485052565860626468707276801416162222242426262828303232343436363840403636363638383838424245454547474848484848485051525252545656585860646566687072727476782102202202202402602903203704004705405806206507408008208509501.0501111111111111111111115678ACCESSORIES 3/ 4”UNE 16511 ISO 3316UNE 16511ISO 33109ALBAL10EXTENSIONUNIVERSAL JOINTREF.135.001135.011135.021L125200400A363636B232323grs.5007101.390u.111REF.A135.251 40L grs.u.107610111UNE 16512 ISO 331512CBSLIDING “T” HEADAABCLSLIDING “T” HANDLE13REF.ABCgrs.u.REF.ABCLgrs.u.135.10137,520603051135.081 37,520 604551.38011475

1ACCESSORIES 3/4”2UNE 16512ISO 3315UNE 16512ISO 3315AL3HLSWIVEL HANDLE72 TOOTH REVERSIBLE RATCHETBCREF.HLgrs.u.REF.ABCLgrs.u.4135.421UNE 16512ISO 3315405051.8001135.511 60 58 20 567 2.175135.701 Repair Kit (Square, Pawl, Spring, Cover, Screw)115ABCALLBC672 TOOTH REVERSIBLE RATCHET HEAD PASS THROUGH RATCHETREF.135.501A60B58C20L165grs.1.080u.1REF.135.531A67B60C20L525grs.2.160u.17ABCL8PASS THROUGH RATCHET HEADLBAR HANDLECREF.ABCLgrs.u.REF.LCgrs.u.9135.521135.731135.7216760 20 145Pass through squareRepair Kit1.130111135.151450201.0851UNE 16503ISO 117410ABALL11REF.ABLOFFSET HANDLEgrs. u.REF.AL3/4 TO 1" INCREASING ADAPTORgrs.u.135.48175254001.7101135.6013860295112UNE 16503ISO 11741314Due to the especial workingconditions of this adaptor,it is not guaranteed against malesquare failure.76REF.135.651A34AL3/4 - 1 /2" REDUCING ADAPTORL grs. u.56 200 1

3 / 4” SOCKET SETS13/4"20 mm.23REF.DesignationMetal box, 460 x 125 x 85 mm.TypeNº Pcs.grs.REF.DesignationMetal box, 460 x 180 x 85 mm.TypeNº Pcs.grs.4139.011139.111Jullavaso 310Jullavaso 320HexBihex9 sockets 22 - 24 - 27 - 30 - 32 - 36 - 41 - 46 - 501 extension 200 mm 135.0111 extension 400 mm 135.0211 ratchet head 135.5011 sliding “T” handle 135.081131311.00011.000139.021 Jullavaso 311 Hex21139.121 Jullavaso 321 Bihex2115 sockets 22 - 23 - 24 - 26 - 27 - 28 - 30 - 32 - 34 - 36 - 38 -41 - 42 - 46 - 501 extension 200 mm 135.0111 extension 400 mm 135.0211 ratchet head 135.5011 sliding “T” handle 135.0811 joint 135.2511 reducing adaptor 135.65114.20014.20056REF.DesignationTypeNº Pcs.grs.REF.DesignationTypeNº Pcs.grs.139.311 Jullavaso 360 Bihex13 12.0009 sockets 1. 1 /4 - 1. 5 /16 - 1. 7 /16 - 1. 1 /2 - 1. 5 /8 - 1. 11 /16 - 1. 13 /16 -1. 7 /8 - 21 extension 200 mm 135.0111 extension 400 mm 135.0211 ratchet head 135.5011 sliding “T” handle 135.081139.321 Jullavaso 361 Bihex22 15.40016 sockets 7/8 - 15/16 - 1 - 1.1/16 - 1.1/8 - 1.1/4 - 1.5/16 - 1.3/8 - 1.7/16 -1.1/2 - 1.5/8 - 1.11/16 - 1.3/4 - 1.13/16 - 1.7/8 - 21 extension 200 mm 135.0111 extension 400 mm 135.0211 ratchet head 135.5011 sliding “T” handle 135.0811 joint 135.2511 reducing adaptor 135.651783/4” DISPENSER910REF.910.081Nº Pcs.1104910.7618 sockets 197 sockets 22 - 23 - 24 - 26 - 27 - 286 sockets 29 - 30 - 32 - 335 sockets 36 - 384 sockets 41 - 42 - 46 - 504 ratchet heads 135.501ContentsDispenser empty mm.Bihexkg.7,046,01112470 x 320 x 480131477

11” SOCKETS2UNE 16507 ISO 2725 DIN 31241"25 mm.3S4HEX.REF.SABCLgrs.u.ABLCHEX.REF.SABCLNPP Profile that moves tensionsaway towards the flanks andavoids wearing the edges.grs.u.567141.411141.461141.501141.541141.551141.581141.601141.631141.651141.671141.701141.711141.751141.771141.801141.82141465054555860636567707175778082576369747579828688909495101103108110293335383941424344464748505254564848484854545454545460606060606067717478798283858689919295981011046257408801.0401.1751.2851.3601.5901.6251.7251.9702.0252.3002.5002.8852.9001111111111111111141.111141.141141.151141.161141.181141.191141.201141.211141.221141.231141.241141.251141.261141.271141.2811. 5 /81. 13 /161. 7 /822. 1 /82. 3 /162. 1 /42. 3 /82. 1 /22. 9 /162. 5 /82. 3 /42. 15 /1633. 1 /857636569747579828688909410110310829333435383941424344464750525448484848485454545454546060606067717374787982838586899195981016207457858751.0501.1101.3101.3801.5301.6101.7651.8651.9652.3202.5851111111111111118UNE 16511 ISO 3316ACCESSORIES 1”91"25 mm.ABLLC10REF.LABkg.EXTENSIONu.REF.LCkg.BAR HANDLEu.145.011145.021200400484827271.1752.08511145.151508251.940111UNE 16512 ISO 33151213BACSLIDING “T” HEADABCLSLIDING “T” HANDLEREF.ABCgrs.u.REF.ABCLgrs.u.14145.1015025786851145.0815025785082.625178

ACCESSORIES 1”1UNE 16512 ISO 33151"25 mm.UNE 16512 ISO 33152AABLBLC372 TOOTH REVERSIBLE RATCHET HEAD72 TOOTH REVERSIBLE RATCHETREF.145.501145.701A B L grs.67 73 190 1.870Repair Kit (Square, Pawl, Spring, Cover, Screw)u.11REF.145.511A67B73C25L640grs.3.870u.14B5ACSWIVEL HANDLE HEADLSWIVEL HANDLEL6REF.ALgrs.u.REF.LBCgrs.u.145.431 50UNE 16503 ISO 11741671.2001145.42162425803.154171" TO 3 /4" REDUCING ADAPTORALDue to the special working conditions of this adaptor,it is not guaranteed againts male failure.REF.145.651A48L73grs.535u.181” SOCKET SETS1"25 mm.910Metal box, 560 x 210 x 120 mm.REF. Designation Type149.011 Jullavaso 410 Hex8 sockets: 46 - 50 - 55 - 60 - 65 - 70 - 75 - 801 extension 200 - 145.0111 extension 400 - 145.0211 ratchet head 145.5011 sliding “T” handle 145.081Nº Pcs.12kg.25,2Metal box, 605 x 225 x 120 mm.REF.DesignationTypeNº Pcs.149.021 Jullavaso 411 Hex1914 sockets: 46 - 50 - 54 - 55 - 58 - 60 - 63 - 65 - 67 - 70 - 71 -75 - 77 - 801 extension 200 - 145.0111 extension 400 - 145.0211 ratchet head 145.5011 sliding “T” handle 145.0811 reducing adaptor 145.651grs.37,01112Metal box, 560 x 210 x 120 mm.Metal box, 605 x 225 x 120 mm.REF.DesignationTypeNº Pcs.kg.REF.DesignationTypeNº Pcs.grs.149.211 Jullavaso 450 Hex128 sockets: 1. 7 /8 - 2 - 2. 3 /16 - 2. 3 /8 - 2. 5 /8 - 2. 3 /4 - 3 - 3. 1 /81 extension 200 - 145.0111 extension 400 - 145.0211 ratchet head 145.5011 sliding “T” handle 145.08125,4149.221 Jullavaso 451 Hex1914 sockets: 1. 13 /16 - 1. 7 /8 - 2 - 2. 1 /8 - 2. 3 /16 - 2. 1 /4 - 2. 3 /8 -2. 1 /2 - 2. 9 /16 - 2. 5 /8 - 2. 3 /4 - 2. 15 /16 - 3 - 3. 1 /81 extension 200 - 145.0111 extension 400 - 145.0211 ratchet head 145.5011 sliding “T” handle 145.0811 reducing adaptor 145.65136,0131479

13/ 8” IMPACT SOCKETS2UNE 16507 ISO 2725 DIN 3129 3/8"10 mm.HEXREF.SABCLgrs.u.354ABSLC160.071160.081160.091160.101160.111160.121160.131160.141160.151160.161160.171160.181160.191160.201160.211160.221160.241789101112131415161718192021222412,512,914,515,916,718,119,720,521,322,824,525,326,928,529,230,133,24,34,65,167,17,17,49,29,210,410,41111,712,212,51314,51919191919222222222222222222222222262626262627272728282929303131333430303031323149454548585662707174931111111111111111163/ 8” IMPACT SOCKETS DEEP SERIES78SHEXREF.SABCLgrs.u.9ABLC161.101161.131161.17110131715,919,724,59,610,411,21919226554676887175111103/ 8” TORX ® IMPACT SOCKETS11B12SCLAREF.SABCLgrs.u.REF.Nº Pcs.Contentsgrs.1314163.051163.061163.071163.081163.101163.121163.141E - 5E - 6E - 7E - 8E - 10E - 12E - 144,75,76,27,59,411,112,98,59,710,311,613,515,317,54,84,86,16,67,68,910,21919191919191928282828282828293031323334361111111163.2017E-5 – E-6 – E-7 – E-8 – E-10 –E-12 – E-1432580

3/8” ACCESSORIES13/8"10 mm.UNE 16503 ISO 1174UNE 16503 ISO 11742ABLAL3EXTENSIONSUNIVERSAL JOINTREF.162.001162.021L75150A2020B grs. u.12,6109015011REF.A162.501 20L58grs.115u.14UNE 16503 ISO 1174UNE 16503 ISO 117456Due to the special working conditions of this adaptor,it is not guaranteed againts male failure.3/8 TO 1 /4" REDUCING ADAPTORAL3/8 TO 1 /2" INCREASING ADAPTORAL7REF.ALgrs.u.REF.ALgrs.u.162.6512232481162.601205087189ALB103/8” ADAPTOR FOR 1 /4" BITS3/8" SAFETY RINGSREF.A162.551 1/4” 12C19L30grs.28u.1REF.162.931162.9413/8”3/8”7-1213-24E5-E14grs.22u.111112131481

11 / 2” IMPACT SOCKETS2UNE 16507 ISO 2725 DIN 3129 1/2"12,5 mm.3SACAC56784HEXREF.167.081167.091167.101167.111167.121167.131167.141167.151167.161167.171167.371167.181167.191167.391167.201167.211167.221167.231167.241167.251167.261167.271167.301167.321167.341167.361S89101112131415161717 heavy duty181919 heavy duty202122232425262730323436A1516171920212323252630282933303133343536383942444548B7889910101012128131410141414141919212124222323C2525252525252530303030303030303030303030303030383838LB3838383838383838383838383840383838383845454550505050Lgrs.75808085858080125125120145125125165128140140140170187180195225273397458u.11111111111111111111111111SREF.168.101168.111168.121168.131168.141168.161168.171168.181168.191168.211168.221168.231168.241168.271168.301101112131416171819212223242730A171819,5212223,52626283132,532,5353842B7,68,69,410,210,71212,712,714,214,214,216,316,320,321,6C252525252530303030303030303030L787878787878787878787878787878LONG SERIESgrs.109113141154181230230230237258319339342364400Bu.111111111111111L91011REF.167.661167.681167.701167.711167.731167.751167.191167.771167.791167.801167.821167.271167.841167.861S3/87/161/29/165/811/163/4 = 1913/167/815/1611. 1 /16 = 271. 1 /81. 1 /4A1718,520,522,52526,52931333536,53940,744B7778881010101414151520C2525252530303030303030303038L3838383838384040404545464640grs.85838585130130130130150175190200205256u.11111111111111REF.168.901Nº Pcs.7SOCKET RAIL SETSContentsgrs.10 - 13 - 17 - 19 - 22 - 24 - 27 1.7351213SOCKET RAIL SETS1/2” IMPACT SOCKET SET IN MODULAR BOXREF.Nº Pcs.Contentsgrs.REF.ContentsPzas.14167.901167.911958 - 10 - 12 - 14 - 17 - 19 - 22 - 24 - 2717 - 19 - 22 - 24 - 271.180835167.92110 - 13 - 14 - 17 - 19 - 21 - 22 - 24 -27 - 30 - 17 - 191282

SOCKETS FOR WHEELS123SEE RANGEIN CHAPTER 121/2” TORX ® IMPACT SOCKETS456B7CAREF.169.101169.121169.141169.161169.181169.201169.241E - 10E - 12E - 14E - 16E - 18E - 20E - 24S9,411,112,914,716,618,422,1A151618,520222528,5B8,98,911,411,412,51416,5CS25252525253030L38383838383845grs.687073747683121Lu.1111111REF.169.291Nº Pcs.7ContentsE-10 – E-12 – E-14 – E-16 – E-18 –E-20 – E-24RAIL SOCKETS SETgrs.660891/2” IMPACT SOCKETWITH TORX ® BIT1/2” IMPACT SOCKETWITH HEXAGONAL BIT1011L1BSLDLA12REF.SCLgrs.u.REF.ABLgrs.u.170.251170.271170.301170.401170.451170.501170.551170.601T25T27T30T40T45T50T55T604,45,05,56,67,88,811,213,225252525252525255555555555555555787880808284929811111111166.051166.061166.081166.101166.121166.141166.171166.191568101214171925252525303030308912161821262644444447505050506565656514014014014011111111131483

11/2” ACCESSORIES2UNE 16503 ISO 1174 1/2"12,5 mm.UNE 16503 ISO 11743ABALL4REF.LABgrs.EXTENSIONSu.REF.ALUNIVERSAL JOINTgrs.u.5169.031169.011169.02175125250252525171717130265475111169.251306018016UNE 16503 ISO 1174UNE 16503 ISO 11747AA8LDue to the special working conditions of this adaptor,it is not guaranteed againts male failure.L9REF.169.651A25L381/2 TO 3/8" REDUCING ADAPTORgrs.u.1201REF.169.601A251/2 TO 3/4" INCREASING ADAPTORLgrs.u.451051101112REF.169.921169.9311/2”1/2”10-1415-36E10-E18E20-E241/2" SAFETY RINGS5-1012-19T25-T60grs.33u.11131484

3/4” IMPACT SOCKET1UNE 16507 ISO 2725 DIN 3129 3/4"20 mm.HEXREF.173.751173.191173.771173.791173.801173.821173.271173.841173.861173.871173.881173.891173.381173.911173.931173.461S11/163/4 = 1913/167/815/1611. 1 /16 = 271. 1 /81. 1 /41. 5 /161. 3 /81. 7 /161. 1 /2 = 381. 5 /81. 3 /41. 13 /16 = 46A31333537394143454950545455616567B12121212121215151717181820202222C44444444444444444444444444444444L50505050505050505356565658586363grs.355360360370375375390390440470495540540615710745u.1111111111111111423ACBLS5HEXREF.SABCLgrs.u.173.171173.181173.191173.211173.221173.231173.241173.271173.281173.291173.301173.321173.331173.341173.361173.381173.411173.461173.501173.551173.60117181921222324272829303233343638414650556030,031,032,535,036,037,538,542,544,045,046,048,550,051,053,556,060,066,071,077,583,514141414141414202020202121212121222530323244,044,044,044,044,044,044,044,044,044,044,044,044,044,044,044,044,044,044,054,054,051,051,051,051,051,051,051,053,053,053,053,057,057,057,057,057,058,062,068,072,072,03303303403503503603703904004004304604805005105506507008301.1001.200111111111111111111111REF.173.011Nº Pcs.8SET IN METAL BOXContents24, 27, 29, 30, 32, 34, 36 and 38grs.4.000u.167893/4” LONG SERIE10SABLC11HEXREF.174.171174.191174.211174.221174.241174.271174.301174.321174.331174.341174.361174.411S171921222427303233343641A313336374043474951525561B12,714,214,215,815,817,61922,422,422,422,422,4C444444444444444444444444L959595959595959595959595grs.5585816767037538038989571.0129841.0841.270u.11111111111112131485

13/4” SQUARE DRIVE HEX BIT IMPACT SOCKET234BLAHEXREF.172.121172.141172.171172.191172.221172.241S121417192224A383838444444B182126262626L676767677171grs.280280280450460500u.11111153/4"20 mm.3/4” ACCESSORIESUNE 16503 ISO 1174 UNE 16503 ISO 117467ABLEXTENSIONSUNIVERSAL JOINTAL8REF.175.011175.101175.021in3/4”3/4”3/4”in3/4”3/4”3/4”A444444L175250330grs.8501.1901.460u.111REF.175.251A44L88grs.580u.19UNE 16503 ISO 1174 UNE 16503 ISO 117410Given the special conditionsof work of this product, it isnot guaranteed against thebreakage of the squaresliding handle.ALAL3/4 TO 1 /2" REDUCING ADAPTOR3/4 TO 1” INCREASING ADAPTOR11REF.175.651in3/4”in1/2”A44L56grs.350u.1REF.175.601in3/4”in1”A44L63grs.410u.112133/4" SAFETY RINGSREF.grs.u.14175.911179.9313/4”3/4”17-4650-6012-24691186

1” IMPACT SOCKETS1UNE 16507 ISO 2725 DIN 31291"25 mm.HEXREF.177.011177.271177.021177.031177.381177.051177.461177.071S1”1. 1 /16 = 271. 1 /41. 7 /161. 1 /2 = 381. 5 /81. 13 /16 = 461. 7 /8A4346525760637071B1618212324252627C5454545454545454L5959626667697578grs.6556706858208459201.1501.260u.1111111123AB LCS4HEXREF.177.221177.241177.271177.301177.321177.331177.341177.361177.381177.411177.421177.461177.501177.551177.601177.651177.701177.751177.801S22242730323334363841424650556065707580A4042465052535457606364707480869198105110B14161820212121232425252629303233343739C54545454545454545454545454545454548686L5959596162626266676969758186909498102105grs.6456506706806956957208008459209501.1501.3751.5401.7001.9402.4502.9003.300u.1111111111111111111REF.177.101Nº Pcs.7SET IN METAL BOXContents24, 27, 30, 32, 33, 36 and 38grs.5.500u.156781” LONG SERIE910ABLCS11HEXREF.SABCLgrs.u.178.221178.241178.271178.301178.321178.331178.341178.361178.381178.411178.461178.501178.551178.6012224273032333436384146505560404246505253555760647075818715,919,119,121,922,422,422,422,925,428,530,232353854545454545454545454545454541001001001001001001001001001001001001001059751.0161.1341.2561.2971.3111.2971.4741.4791.5331.7101.8962.1552.3721111111111111112131487

11” SQUARE DRIVE HEX BIT IMPACT SOCKET23REF.mm.ABLgrs.u.4BLA176.171176.191176.221176.2711719222754545454262626267474787868070073079011115UNE 16503 ISO 11741” ACCESSORIES6ABA7EXTENSIONSLUNIVERSAL JOINTLREF.LABgrs.u.REF.ALgrs.u.8179.001179.011179.0211251753305454543333331.0851.3902.395111179.521541101.0701UNE 16503 ISO 11749AA10LGiven the special conditions ofwork of this product, it is notguaranteed against the breakageof the square sliding handle.L1 TO 1. 1 /2" INCREASING ADAPTOR1 TO 3 /4" REDUCING ADAPTOR11REF.179.601A54L83grs.1.000u.1REF.179.651A54L72grs.650u.112131" SAFETY RINGSREF.grs.u.14179.931179.9411”1”19-7075-8017-279131188

1.1/2” IMPACT SOCKETS1AB LCSHEXREF.179.151179.161179.171179.181179.191179.201179.211179.221179.231179.241179.251179.261179.271179.281179.291179.301S4650556065707580859095100105110115120A7680879399106112118125131137143150156162169B29313436384244465151545761646771C86868686868686868686127127127127127127L8484909095100105110110115120125130135140150grs.2.0502.2412.3862.8493.1713.4933.9104.2825.1895.3308.7508.9139.0959.1499.88810.673u.111111111111111142351.1/2” ACCESSORIESAGiven the special conditionsof work of this product, it isnot guaranteed against thebreakage of the square slidinghandle.REDUCTOR 1. 1 /2 A 1"67LREF.ALgrs.u.179.851861002.000189101.1/2" SAFETY RINGSREF.179.941179.9911. 1/2”1.1/2”46-9095-120grs.1315u.111112131489

1/4” SOCKET DRIVERS90SLOTTEDHEXAGONALTORXPHILLIPSLBALBALBAREF.107.111107.121107.131A121212B191919L373737grs.151515u.111PH1PH2PH3REF.107.521107.531107.541107.551107.561107.571107.581107.591107.601B191919191919191919L373737373737373737grs.151515151515151515A121212121212121212S2,32,52,73,33,84,45,05,56,6T8T9T10T15T20T25T27T30T40u.111111111SLBAREF.107.021107.031107.041107.051A12121212B19191919L37373737grs.15151515u.11110,8x41,0x5,51,2x6,51,2x8REF.107.331107.341107.351107.361107.381B1919191919L3737373737grs.1515151515u.11111A121212121234568REF.106.211106.221106.231grs.250250205Contents0,8x4 1,0x5,5 1,2x6,5 1,2x8PH1 PH2 PH3 HEX 3,4,5,6,80,8x4 1,0x5,5 1,2x6,5 1,2x8PZ1 PZ2 PZ3 HEX 3,4,5,6,8T8-T40Nº Pcs.12129SOCKET RAIL SETSPOZIDRIVREF.107.211107.221107.231A121212B191919L373737grs.151515u.111PZ1PZ2PZ3LBA1413121110987654321

3/8” SOCKET DRIVERS1AA2REF.117.031117.041117.051117.061117.0711 x 5,51,2 x 6,51,2 x 81,5 x 81,6 x 10A1818181818B2626262626L4848484848Bgrs.3535353535LSLOTTEDu.11111REF.117.331117.341117.351117.361117.371117.381117.40134567810A18181818181818B26262626262626L48484848484848Bgrs.35353535353535LHEXAGONALu.111111143ABLPHILLIPSREF.117.441117.451117.461117.481117.501456810A1818181818B2626262626L9292929292HEXAGONAL LONG SERIESgrs.7070707070HEXAGONAL, BALL POINT, LONG SERIESu.1111156REF.ABLgrs.u.REF.ABLgrs.u.117.111117.121117.131PH1PH2PH3181818262626484848353535111117.641117.651117.661117.681117.70145681018181818182626262626929292929270707070701111178AASBLPOZIDRIVBLTORX9REF.ABLgrs.u.REF.SABLgrs.u.117.211117.221117.231PZ1PZ2PZ3181818262626484848353535111117.541117.551117.561117.571117.581117.591117.601117.611117.621T10T15T20T25T27T30T40T45T502,73,33,84,45,05,56,67,88,8181818181818181818262626262626262626484848484848484848353535353535353535111111111101112REF.119.321Nº Pzas.11Contents1x5,5 1,2x6,5 1,2x81,5x8 1,6x10PH1, PH2, PH3PZ1, PZ2, PZ3SOCKET RAIL SETgrs.455REF.119.331119.341119.351Nº Pcs.12129BHEX 3,4,5,6,7,8,10HEX L 4,5,6,8,10HEX 3,4,5,6,7,8,10HEX L B 4,5,6,8,10T10 - T50SOCKET RAIL SETgrs.665665340131491

11/2” SOCKET DRIVERS2DIN 7422HEX1/2"12,5 mm.RIBE CV 843AABBLL54REF.180.041180.051180.061180.071180.081180.101180.121180.141180.171180.191456781012141719A23232323232323232828B22222222222222222424L60606060606060606060grs.777778797990100115190200u.1111111111REF.184.051184.061184.071184.081184.091184.101184.121184.141184.161M 5M 6M 7M 8M 9M 10M 12M 14M 16A232323232323232323B252525252525252525L636363636363636363grs.63707172768085112123u.11111111167LONG SERIELONG SERIE89REF.180.351180.361180.371180.381180.401180.42156781012A232323232323B626262626262L100100100100100100grs.100100100100145150u.111111EXTRA LONG SERIEREF.184.271184.401184.441184.461M 7M 10M 14M 16A23232323B62628282L100100120120grs.100120175195u.1111REF.ABLgrs.u.10180.451180.461562323142182180220160190111112SETSETREF.Nº Pcs. Contentsgrs.REF.Nº Pcs. Contentsgrs.13180.901 105 - 6 - 8 - 10 - 12 - 14 - 177 - 8 - 10Long. 60Long. 1001.130184.301 7M5 - 6 - 8 - 10 - 12 - 14 - 166751492

1/2” SOCKET DRIVERS1DIN 74221/2"12,5 mm.XZN2BASBA3LLTORX ® u.REF.SABLgrs.REF.ABLgrs.u.183.201183.251183.271183.301183.401183.451183.501183.551183.601T - 20T - 25T - 27T - 30T - 40T - 45T - 50T - 55T - 603,844,404,965,496,607,778,7911,1713,202323232323232323231717171717171717175555555555555555557074747476767987105111111111185.051185.061185.081185.101185.121185.141185.161185.181M 5M 6M 8M 10M 12M 14M 16M 18232323232323232317171717172020205555555555586060757575858710512513011111111456REF.SABLLONG SERIEgrs.u.REF.ABLLONG SERIEgrs.u.7183.411183.461183.511183.561183.711T - 40T - 45T - 50T - 55T - 706,607,778,7911,1715,49232323232382826210210212012010014014019020019025028011111185.361185.381185.401185.421M 6M 8M 10M 12232323236262626210010010010080100115165111189REF.183.901Nº Pcs.9ContentsT20 - 25 - 27 - 30 - 40 - 45 -50 - 55 - 60grs.785SETREF.185.901Nº Pcs.9ContentsM5 - 6 - 8 - 10 - 12 - 14M8 - 10 - 12Long. 55Long. 100grs.945SET101112SEE OTHER SOCKET SETSIN CHAPTER 1131493

110 MM. DRIVE HEX BITS2HEXXZN1010mm.mm.3LSLREF.Lgrs.u.REF.Lgrs.u.564472.011472.021472.031472.071472.081472.131472.141472.161472.171472.221472.231472.261472.29145566778810101214303072307230723072301153030131440144015421543207525305555555555555472.351472.381472.391472.421472.431472.461472.471472.501472.511472.531M 5M 6M 6M 8M 8M 10M 10M 12M 12M 14SQUARE303072307230723072301314401542174520562555555555557TORX ®LS10mm.8SL10mm.REF.472.951472.9618103030grs.1823"Torx® is the registered trademark of Camcar Division of Textron Inc.""Lu.5591011REF.472.551472.571472.591472.611472.631472.641472.671472.681472.721472.731472.771472.781472.821T 20T 25T 27T 30T 40T 40T 45T 45T 50T 50T 55T 55T 60S3,844,404,965,496,606,607,777,778,798,7911,1711,1713,20L303030303072307230723011530grs.13131314144015401642187523u.555555555555510mm.REF.470.041BIT HOLDERA B C L17 13,5 22 38ABLgrs.55Cu.31/2"12,5 mm.BIT SET121314set and composition on page 24494

10 MM. DRIVE HEX BIT SETS1HEXXZN23Metal box 185 x 70 x 32REF.Nº Pcs.CompositionsizeLgrs.Metal box 185 x 70 x 32REF.Nº Pcs.CompositionsizeLgrs.4471.161 10 HEX5-6-8-10-12-146-8101 bit holder3072115590471.181 10 XZN M5-6-8-10-12-14 30M8-10-12721 bit holder5605TORX ®HEX, TORX ® , XZN67Metal box 185 x 70 x 32REF.Nº Pcs.CompositionsizeLgrs.Metal boxa 200 x 105 x 35REF.Nº Pcs.CompositionsizeLgrs.8471.17111TORXT20-25-27-30T40-45-50-55T45T551 bit holder303072115"Torx® is the registered trademark of Camcar Division of Textron Inc.""540471.15132HEX 4-5-6-8-10-12-146-810TORX T20.25-27-30T40-45-50-55T45T55XZN M5-6-8-10-12-14M8-10-12Square 8-101 bit holder30721153030721153072301.2609101112SEE OTHER TYPE OF WRENCHESIN CHAPTER 2131495

123456789101112131496

123456785 BENCHVICES910Ref. 201.231page 98Ref. 207.041page 99Ref. 202.401page 100Ref. 202.561page 100Ref. 201.431page 98Ref. 217.161page 101Ref. 255.011page 10211121314

1234567811CUTTING TOOLSMEASURINGTOOLS9Ref. 801.101page 170Ref. 803.211page 1711110Ref. 980.331page 17112Ref. 980.451page 17213Ref. 981.081page 17214

1HACKSAW FRAME23456• All-hard blade.• Very precise cutting and long life.• For heavy-duty work and all kind of materials(alloy, stainless steel).• The workpiece must be firmly clamped.• A toothed high-speed steelstrip welded to a backingblade made of spring steel.• Flexible and safe (unbreakable).• High performance.• The blade can withstand veryhigh tension; has stableproperties and produces verystraight, uniform cuts.78HAHALLSTRAIGHT HANDLEPISTOL GRIP HANDLE9REF.801.011Desig.N. 1A100H128L512grs.575u.10REF.801.031Desig.N. 3A100H128L477grs.665u.1010111213• A professional and stable hacksaw frame.• Blade storage inside the rectangular back section.• Can be used as a Compass saw.• Alternative 55 degree blade mounting for flush cutting.• Supplied with a 24 TPI bimetal hacksaw blade.ALUMINIUM INJECTED / TENSIONING SCREWHALREF.Desig.AHLgrs.u.14801.101N. 111101514006655170

SAW BLADES12LABCARBON STEEL, FLEXIBLELABHIGH SPEED STEEL (HSS), SEMI-FLEXIBLE3REF.Points per inchABLgrs.u.REF.Points per inchABLgrs.u.803.011803.021803.0311824320,650,650,65131313300300300171717505050803.120803.121803.1311824320,650,650,6513131330030030017171750505045LAH6BLREF.803.321803.211803.221803.231BIMETAL, FLEXIBLE, (SUPER HSS)Points per inch24182432A0,650,650,650,65B13131313L250300300300grs.14,5171717u.50505050REF.801.145L229ALUMINIUM HOLDER, WITH 24 TPIBIMETAL BLADE, IN CLIPH51grs.140• A useful mini-hacksaw for difficult-to-reach positions.• Easy to handle• Supplied with a 250mm bimetal hacksaw blade, 24 TPI.u.178SPARE SCREWREF.801.145-1grs.10u.19MEASURING TAPES10ALAL1112REF.980.331980.341980.381L3 m.5 m.8 m.A19 mm19 mm25 mmBIMATERIAL CASESTOP SYSTEMDISPLAY BOXgrs.170225390u.121212REF.980.391980.601L3 m.5 m.A16 mm19 mmDOUBLE STOP SYSTEMMATT TAPEDISPLAY BOXgrs.105175u.24121314171

1LONGS TAPES2ALAL34REF.Lgrs.FIBERGLASS TAPEu.REF.STEEL TAPE / BIMATERIAL CASELgrs.u.5980.451980.46110 m.20 m.215300GAUGE SETS11980.561980.57110 m.20 m.2053401167891011REF.981.351PitchMetric 60°0,25 to 6 mm.Nº blades240,25-0,30-0,35-0,40-0,45-0,50-0,60-0,70-0,75-0,800,90-1-1,25-1,50-1,75-2-2,5-3-3,5-4-4,5-5-5,5-6REF.981.311REF.981.411PitchWhitworth 55°4 to 62 TPI4-4,5-5-6-7-8-9-10-11-12-13-14-16-18-1920-22-24-25-26-28-30-32-36-40-48-60-62PitchMetric 60°0,25 to 6 mm.0,25-0,30-0,35-0,40-0,450,50-0,60-0,70-0,75-0,800,90-1-1,25-1,50-1,75-2-25-3-3,5-4-4,5-5-5,5-6SCREW PITCH GAUGE SETSNº blades28PitchWhitworth 55°4 to 62 TPI4-4,5-5-6-7-8-9-10-1112-13-14-16-18-1920-22-24-25-26-2830-32-36-40-48-60-62grs.38grs.43u.10u.10Nº blades grs.52 76u.10REF.981.511REF.981.531REF.981.551Contents1 to 7 mm.1-1,25-1,5-1,75-2-2,252,5-2,75-3-3,5-4-4,5-55,5-6-6,5-7Contents7,5 to 15 mm.7,5-8-8,5-9-9,5-10-10,511-11,5-12-12,5-1313,5-14-14,5-15Contents15,5 to 25 mm.15,5-16-16,5-17-17,518-18,5-19-19,5-20-2122-23-24-25RADIUS GAUGE SETSNº blades grs. u.17 65 5Nº blades grs. u.16 110 5Nº blades grs. u.15 105 5FEELER GAUGE SETSREF.ContentsNº bladesgrs.u.12981.081REF.0,05 to 0,60 mm.0,05-0,10-0,15-0,200,25-0,30-0,35-0,40-0,50Contents9Nº blades27grs.5u.1314Blade length: 80 mm.981.131REF.981.2010,05 to 1 mm.0,05-0,10-0,15-0,20-0,25-0,300,40-0,50-0,60-0,70-0,80-0,90-1Contents0,05 to 1 mm.0,05-0,10-0,15-0,20-0,25-0,30-0,350,40-0,45-0,50-0,55-0,60-0,65-0,700,75-0,80-0,85-0,90-0,95-113Nº blades2052grs.835u.5172

1ROUND GUIDE BENCH VICE23Greasing pointsfor maintenanceExtendedanvilSingle piece steelblocks for higher loadcapacity• Interchangeable jaws• Diamond grinded, forbetter grip• Termically treated, fordurability• Perfect jaws alignment45678Optionalswivel baseCapacity range from 3,5 Ton(80 mm) to 9 Ton (150 mm)at maximum openingReinforced cantileversupport, to assureresistance at maximumopeningRolled threadspindle, for easylocating andtightening parts• Protected spindle• Round shape helps adjusting all the way• Bigger guide diameter for increased resistance9UNE 16598ROUND GUIDE101112SADdLBCSWIVEL BASE1314REF.201.231201.241201.251201.261Desig.FR-80FR-100FR-125FR-150S80100125150A80100125150B42567280C130166196229D55758097kg.6,111,418,229,7REF. Ø201.431 80 100201.451 100 125201.461 125 150201.471 150 175Suitable for all round and square vices.L90115145165d11131317grs.8501.1501.5002.50098

SQUARE GUIDE BENCH VICEExtendedanvilOptional pipejaws• Interchangeable jaws• Diamond grinded, for better grip• Thermically treated, for durability• Perfect jaws alignementSingle piecesteel parts forhiger loadcapacity123Optionalguideadjusting systemOptionalswivel base54Reinforced cantileversupport, to assureresistance at maximum opening6Improved resistancefor all openings.Excellent life spanTop and sides spindleprotection.Perfect guide adjusting,on 4 machined surfaces.Rolled thread spindle,for easy locating andtightening parts78SQUARE GUIDEUNE 16598 UNE 16598910S11SADBADCBC12REF.207.041207.051207.061207.071Desig.FCP-100FCP-125FCP-150FCP-175S100125150175INTERCHANGEABLE JAWSA100150200225B488092108C100147170200D35x4053x7066x8075x92kg.5,512,419,029,4REF.216.041216.051216.061216.071Desig.FCP-100 RTFCP-125 RTFCP-150 RTFCP-175 RTS100125150175INTERCHANGEABLE JAWS,ADJUSTING SCREWSAND PIPE GRIPSA100150200225B488092108C100147170200D35x4053x7066x8075x92PipeØ Capacity1/4" - 3 /4"1/2" - 2. 1 /2"1/2" - 3"3/4" - 4"kg.5,813,019,630,0131499

1SPARE PARTS FOR ROUNDGUIDE BENCH VICESPARE PARTS FOR SQUAREGUIDE BENCH VICE2SPARE JAWS FOR ROUNDGUIDE MODEL FORREF. 201SPARE JAWS FOR SQUAREGUIDE MODEL FORREF. 207-2163REF.202.401202.411202.421202.431forFR- 80FR-100FR-125FR-150mm.15 x 8020 x 10020 x 12525 x 150u.1111REF.202.441202.421202.451202.461forFCP-100FCP-125FCP-150FCP-175mm.15 x 10020 x 12520 x 15025 x 175u.111145PAIR OF JAWS FOR SQUAREGUIDE VICEREF. 207-216MAIN SPINDLEAND NUT FORREF. 207-2166REF.206.721206.741206.761forFCP-100FCP-125FCP-150/175grs.150200225u.111REF.206.821206.831206.841206.851forFCP-100FCP-125FCP-150FCP-175mm.100125150175L287352432471u.11117MAIN SPINDLEAND NUT FORREF. 2018REF.202.811202.821202.831202.841mm.FR-80FR-100FR-125FR-150L251317364428u.11119BENCH VICES, ACCESSORIES AND SPARE PARTS1011JAW SETPROTECTIVE MAGNETIC JAW SETS,ALUMINIUM WITH DEEPHORIZONTAL AND VERTICAL GROOVE TYPE A1:REF.202.561202.571202.581mm.100125150grs.180200220u.111SJAW SETPROTECTIVE MAGNETIC JAW SETS,POLYURETHANE WITHDEEP HORIZONTAL AND VERTICAL GROOVEREF.202.661202.671202.681mm.100125150grs.150175200u.111STYPE P1:12SS1314JAW SETPROTECTIVE MAGNETIC JAW SETS,ALUMINIUM WITH NORMALHORIZONTAL GROOVEREF.202.511202.521202.541mm.100125150grs.180200220u.111TYPE A2:JAW SETPROTECTIVE MAGNETIC JAW SETS,POLYURETHANE WITHUNIFORM MILLINGTYPE P2:REF.202.761202.771202.781mm.100125150grs.150175200u.111100

DISPENSERTABLE VICE12LBAHD3CREF.Desig.ABCDHLgrs.u.4217.161 SM-60 60 60 75 47 225 210 4.500• Nodular casting • Interchangeable jaws • Protected shaft • Swivel156REF.mm.u.217.26160178REF.217.271mm.60u.19EMPTY DISPENSERREF.910.021Capacity: 4 vices (round or square guide)Size: 400 x 400 x 1.570kg.5,61011121314101

1SCREW CLAMPS23BSAHBSAHREF.ABH x Sgrs.u.REF.ABH x Sgrs.u.4256.001256.011256.021256.031256.041150200250300400909090909030 x 830 x 830 x 830 x 830 x 81.1001.2001.3001.4001.60055555256.131256.141256.151256.161256.181256.2013004005006008001.00012012012012012012035 x 835 x 835 x 835 x 835 x 835 x 82.0002.2002.4002.6003.0003.40055555556SHB78REF.256.231256.241256.251256.261256.281256.301256.321A3004005006008001.0001.200B150150150150150150150H x S40 x 1040 x 1040 x 1040 x 1040 x 1040 x 1040 x 10grs.3.1003.4003.7004.0004.6005.2005.800Au.5522221910LIGHT SCREWCLAMPS11SHB1213REF.255.011255.021255.031255.041255.051A120150200250300B7070707070H x S18 x 718 x 718 x 718 x 718 x 7grs.420450500550600u.1010101010A14102

123456786 PIPETOOLSRef. 302.081page 104Ref. 304.101page 104Ref. 321.281page 105Ref. 332.511page 10691011Ref. 307.301page 104Ref. 303.081page 104Ref. 315.021page 105Ref. 330.021page 106Ref. 540.021page 106121314

1STILLSON WRENCHALUMINIUM WRENCH2UNE 16552UNE 165543S4• Forged template steel• Hardened gripping teeth 55÷60 HRc• Epoxy paintingREF.LSABLBASgrs.Lu.• Comfortable aluminium alloy handle withsection in double T• Light, 40% less weight and great resistanceREF.LSABLBAgrs.Lu.5302.081302.101302.121302.141302.181302.241302.3618"10"12"14"18"24"36"1"1. 3 /8"1. 3 /4"2"2. 3 /8"3"4"19252628303948111517192326302102603103654656159002906208001.1201.8903.2006.1003333111304.101304.141304.181304.241304.36110"14"18"24"36"1. 1 /2"2"2. 1 /2"3"5"222629334417212628322503504506009004309501.6502.5005.200221116MOBILE JAWNUTMOBILENUTFIXED JAW78REF.302.401302.411302.421302.431302.441302.451302.461L8"10"12"14"18"24"36"u.1111111REF.302.501302.511302.521302.531302.541302.551302.561L8"10"12"14"18"24"36"u.1111111REF.304.411304.431304.441304.451304.461L10"14"18"24"36"u.11111REF.304.511304.531304.541304.551304.561L10"14"18"24"36"u.11111REF.304.611304.631304.641304.651304.661L10"14"18"24"36"u.111119UNE 16555CHAIN PIPEWRENCHESUNE 16523PIPE WRENCHES,SWEDISH MODEL1011• Forged steel• Epoxy painting• Hardened gripping teethBASL• Forged steel• Epoxy painting• Hardened gripping teethASBLREF.Desig.SABLgrs.u.REF.SABLgrs.u.12307.301307.311307.321307.331N. 30N. 31N. 32N. 331/5" - 1. 1 /2"1/8" - 2. 1 /2"1/4" - 4"3/4" - 6"8 - 149 - 1612 - 2112 - 2138,55263783505456808801.3002.5505.20010.8001111303.081303.111303.121303.131303.1711/2"1"1. 1 /2"2"3"20252730368111213172403154255506556651.1451.8903.2756.425111111314REF.307.401307.411307.421307.431N-30 chain pipe wr. spare chainN-31 chain pipe wr. spare chainN-32 chain pipe wr. spare chainN-33 chain pipe wr. spare chainL340 mm475 mm560 mm830 mm104

HINGED PIPE VICECHAIN PIPE VICE1UNE 1656023B• Forged steel jaws• Annealed cast iron body• Enamelled• Zinc plattingSAC• Forged steel jaws• Annealed cast iron body• Enamelled• Zinc plattingSALB4REF.315.021315.101315.111S1/8" - 2"A160Upper jawLower jawB131C208grs.4.350REF.317.051317.111S1/8" - 4"A125Spare chainB131L395grs.5.5255PIPE CUTTERSUNE 16549UNE 1654867s• Enamelled• Phosphated finishSMALL COPPER PIPE CUTTERL• Enamelled• Phosphated finishSTEEL PIPE CUTTERSL8REF.SCapacityLgrs.REF.SCapacityLgrs.321.161 1/8" - 5 /8"3 - 16 58 122 2UNE 16557321.501UNE 165581/8" - 2"3 - 503852.520 1910ss• Enamelled• Phosphated finishL• Enamelled• Phosphated finishL11COPPER PIPE CUTTERTELESCOPIC COPPER PIPE CUTTERREF.SCapacityLgrs.REF.SCapacityLgrs.321.281321.3211/8" - 1. 1 /8"1/8" - 1. 3 /8"3 - 303 - 35303532139311321.3511/8" - 1. 3 /8"E3 - 35167389 112dDSPARE PARTSREF.321.511321.551324.541forforfor321.161321.281321.321321.351321.501324.041D202020203141d555599E55551919grs.55552850u.1111111314105

1GASKET CUTTERS234Metal box 145 x 75 x 40 mm.Metal box 155 x 115 x 45 mm.REF.Nº Pcs.grs.REF.Nº Pcs.grs.332.51111700332.521161.200510 punches: 3, 4, 6, 8, 10, 12, 14, 16, 18, 201 handle 332.721 3-2015 punches: 3, 4, 6, 8, 10, 12, 14, 16, 18, 20,22, 24, 26, 28, 301 handle 332.731 3-306Operating instructions:Place the block and the punches on the work surface with the cuttingedge facing upwards. Position correctly the gasket material that is tobe cut. Using a plastic tip hammer, first of all cut the inner part. (Thesmaller punches, from 3 to 10, are slightly longer in order to facilitatethis operation). Then complete the job by effecting the outer cut.7GASKET CUTTERSASL8L91011REF.333.031333.041333.061333.081333.101333.121333.141333.161333.181333.201333.221333.241333.261333.281333.301S34681012141618202224262830Type1/2 x 24 Z”1/2 x 24 Z”1/2 x 24 Z”1/2 x 24 Z”1/2 x 24 Z”FlatFlatFlatFlatFlatFlatFlatFlatFlatFlatA141414141425252525253535353535L313131313130303030303535353535grs.151515151530303030305050505050REF.330.021Capacity6 punches2-2, 5-3-3, 5-4-4, 5REVOLVER WAD PUNCHES- Interchangeable gasket cutters washer cutters- Cuts all gasket materials: leather, rubber, cardboard, fibre, asbestos,lead, felt, plastic, etc.- Triple shapening: inside, outside and cutting edge- Atmosphere protected tempered alloy steel punchesA90L220Agrs.26012SCRAPERSPLASTIC HANDLE, FLEXIBLE TEMPEREDREF.SLgrs.u.1314DIN 7216 UNE 16608SL540.021540.031540.041540.051540.061540.071540.081540.091540.101540.121203040506070809010012022022022022022022022022022022050556065707580859010010101010101010101010106

1071/641/323/641/16mm.0,3970,7941,1911,58825,40025,79726,19426,59126,98850,80051,19751,59451,99152,38876,20076,59776,99477,39177,788101,600102,997102,394102,791103,188127,00127,40127,79128,19128,59152,40152,80154,49153,59153,99177,80178,20178,60178,99179,39203,20203,60204,99204,39204,79228,60229,00229,39229,79230,19254,00254,40254,79255,19255,59279,40279,80280,19280,59280,99304,80305,20305,59305,99306,391/641/323/641/164" 5" 6" 7" 8" 9" 10" 11" 12" "3"2"1"0"1" = 25,4 mm.5/643/327/641/81,9842,3812,7783,17527,38427,78128,17828,57552,78453,18153,57853,97578,18478,58178,97879,375103,584103,981104,378104,775128,98129,38129,78130,18154,38154,78155,18155,58179,78180,18180,58180,98205,18205,58205,98206,38230,58230,98231,38231,78255,99256,38256,78257,18281,39281,78282,18282,58306,79307,18307,58307,985/643/327/641/89/645/3211/643/163,5723,9574,3664,76328,97229,36929,76630,16354,37254,76955,16655,56379,77280,16980,56680,963105,172105,569105,966106,363130,57130,97131,37131,76155,97156,37156,77157,16181,37181,77182,17182,56206,77207,17207,57207,96232,17232,57232,97233,36257,57257,97258,37258,76282,97283,37283,77284,16308,37308,77309,17309,569/645/3211/643/1613/647/3215/641/45,1595,5565,9536,35030,55930,95631,35331,75055,95956,35656,75357,15081,35981,75682,15382,550106,759107,156107,533107,950132,16132,56132,95133,35182,96183,36183,75184,15208,36208,76209,15209,55233,76234,16234,55234,95259,16259,56259,95260,35284,56284,96285,35285,75309,96310,36310,75311,1513/647/3215/641/4157,56157,96158,35158,7517/649/3219/645/166,7477,4447,5417,93832,14732,55432,94133,33857,54757,94458,34158,73882,94783,34483,74184,138108,347108,744109,141109,538133,75134,14134,54134,94184,55184,94185,34185,74209,95210,34210,74211,14235,35235,74236,14236,54260,75261,14261,54261,94286,15286,54286,94287,34311,55311,94312,34312,7417/649/3219/645/16159,15159,54159,94160,3421/6411/3223/643/88,3448,7319,1289,52533,73434,13134,52834,92559,13459,53159,92960,32584,53484,93185,32885,725109,934110,331110,728111,125135,33135,73136,13136,53186,13186,53186,93187,32211,53211,93212,33212,73236,93237,33237,73238,13262,34262,73263,13263,53287,74288,13288,53288,93313,14313,53313,93314,3321/6411/3223/643/8160,73161,13161,53161,9325/6413/3227/647/169,92210,31910,71611,11335,32235,71936,11636,51360,72261,11961,51661,91386,12286,51986,91687,313111,522111,919112,316112,713136,92137,32137,72138,11187,72188,12188,52188,91213,12213,52313,92214,31238,52238,92239,32239,71263,92264,32264,72265,11289,32289,72290,12290,51314,72315,12315,52315,9125/6413/3227/647/16162,32162,72163,12163,5129/6415/3231/641/211,50911,90612,30312,70036,90937,30637,70338,10062,30962,70663,10363,50087,70988,10588,50388,900113,109113,506113,903114,300138,51138,91139,30139,70189,31189,71190,10190,50214,71215,11215,50215,90240,11240,51240,90241,30265,51265,91266,30266,70290,91291,31291,70292,10316,31316,71317,10317,5029/6415/3231/641/2163,91164,31164,70165,1033/6417/3235/649/1613,09713,49413,89114,28838,49738,89439,29139,68863,89764,29464,69165,08889,29789,69490,09190,488114,697115,094115,491115,888140,10140,49140,89141,29190,90191,29191,69192,09216,30216,69217,09217,49241,70242,09242,49242,89267,10267,49267,89268,29292,50292,89293,29293,69317,90318,29318,69319,0933/6417/3235/649/16165,50165,89166,29166,6937/6419/3239/645/814,68415,08115,47815,87540,08440,48140,87841,27565,48465,88166,27866,67590,88491,28191,67892,075116,284116,681117,078117,475141,68142,08142,48142,88192,48192,88193,28193,68217,88218,28218,68219,08243,28243,68244,08244,48268,69269,08269,48269,88294,09294,48294,88295,28319,49319,88320,28320,6837/6419/3239/645/8167,08167,48167,88168,2841/6421/3243/6411/1616,27216,66917,06617,46341,67242,06942,46642,86367,07267,46967,86668,26392,47292,86993,26693,663117,872118,269118,666119,063143,27143,67144,07144,46194,07194,47194,87195,26219,47219,87220,27220,66244,87245,27245,67246,06270,27270,67271,07271,46295,67296,07296,47296,86321,07321,47321,87322,2641/6421/3243/6411/16168,67169,07169,47169,8645/6423/3247/643/417,85918,25618,65319,05043,25943,65644,05344,45068,65969,05669,45369,85094,05994,45694,85395,250119,459119,856120,253120,560144,86145,26145,65146,05195,66196,06196,45196,85221,06221,46221,85222,25246,46246,86247,25247,65271,86272,26272,65273,05297,26297,66298,05298,45322,66323,06323,45323,8545/6423/3247/643/4170,26170,66171,05171,4549/6425/3251/6413/1619,44719,84420,24120,63844,84745,24445,64146,03870,24770,64471,04171,43895,64796,04496,44196,838121,047121,444121,841122,238146,45146,84147,24147,64197,25197,64198,04198,44222,65223,04223,44223,84248,05248,44248,84249,24273,45273,84274,24274,64298,85299,24299,64300,04324,25324,64325,04325,4449/6425/3251/6413/16171,85172,24172,64173,0453/6427/3255/647/821,03421,43221,82822,22546,43446,83147,22847,62571,83472,23172,62873,02597,23497,63198,02898,425122,634123,031123,428123,825148,03148,43148,83149,23198,83199,23199,63200,03224,23224,63225,03225,43249,64250,03250,43250,83275,04275,43275,83276,23300,44300,83301,23301,63325,84326,23326,63327,0353/6427/3255/647/8173,43173,83174,23174,6357/6429/3259/6415/1622,62223,01923,41623,81348,02248,41948,81649,21373,42273,81974,21674,61398,82299,21999,616100,013124,222124,619125,016125,413149,62150,02150,42150,81200,42200,82201,22201,61225,82226,22226,62227,01251,22251,62252,02252,41276,62277,02277,42277,81302,02302,42302,82303,21327,42327,82328,22328,6157/6429/3259/6415/16175,02175,42175,82176,2161/6431/3263/6424,20924,60625,00349,60950,00650,40375,00975,40675,803100,409100,806101,203125,809126,206126,603151,21151,61152,00202,01202,41202,80227,41227,81228,20252,81253,21253,60278,21278,61279,00303,61304,01304,40329,01329,41329,8061/6431/3263/64176,61177,01177,40INCHES TO MM. CONVERSION TABLE1141312111098765324

1234567891011121314108

123456787 SCREWDRIVERSAND BITS910Ref. 407.011page 110Ref. 418.011page 115Ref. 475.1111 /4”page 12311Ref. 459.201page 113Ref. 459.601page 116Ref. 470.011page 12612Ref. 910.481page 113Ref. 429.041page 117Ref. 470.4815 /16”page 12613Ref. 460.101page 114Ref. 040.001page 118Ref. 471.011page 12714

1SCREWDRIVERS23Made with the best materials for best performaceVapour-blasttreatment,optimalprotectionagainstcorrosion45Greatertorques thanrequired byinternationalstandardsInnovative design6• Bimateriale handle• Hardness 59±1 HRcShort bladefor the finaltightening7High-gradechromium vanadiummolybdenum blades89BIMATERIAL SCREWDRIVERS10UNE 16516ISO 2380DIN 5265UNE 16516ISO 2380DIN 526511B A B ACCLLENGINEERS’ SCREWDRIVERELECTRICIANS’ SCREWDRIVER121314REF.407.011407.021407.041407.061407.091407.101407.121407.131407.161407.181407.191A x B x CDesig.0,8 x 4 x 750,8 x 4 x 1001 x 5,5 x 1001 x 5,5 x 1251,2 x 6,5 x 1251,2 x 6,5 x 1501,6 x 8 x 1501,6 x 8 x 1751,6 x 10 x 2002 x 12 x 2502,5 x 14 x 250Diam.mm445566778910Lmm165190200225235260260285320370370grs.40406570100105119127175230260u.10101010101010101055REF.408.011408.021408.031408.041408.061408.071408.091408.101408.121A x B x CDesig.0,4 x 2,5 x 750,5 x 3 x 750,5 x 3 x 1000,6 x 3,5 x 1000,8 x 4 x 1000,8 x 4 x 1251 x 5,5 x 1251 x 5,5 x 1501,2 x 6,5 x 150Diam.mm2,5333,5445,55,56,5Lmm165165190190190215225250260grs.3435404045456590110u.101010101010101010110

BIMATERIAL SCREWDRIVERS1UNE 16516ISO 2380DIN 5265UNE 16516ISO 2380DIN 52652BABACLCL3ELECTRICIANS’ SCREWDRIVERENGINEERS’ STUBBYREF.408.151408.161408.171A x B x CDesig.0,5 x 3 x 2000,8 x 4 x 2501 x 5,5 x 300Diam.mm345,5Lmm290340400grs.4560106u.555REF.401.551401.561A x B x CDesig.1,2 x 5,5 x 251,2 x 6,5 x 25Diam.mm56Lmm8585grs.3535u.101045UNE 16520ISO 8764DIN 5262UNE 16520ISO 8764DIN 52626AACLPHILLIPSCLPOZIDRIV7REF.A x Cmm.Diam.mmLmmgrs.u.REF.A x Cmm.Diam.mmLmmgrs.u.409.001409.011409.021409.031409.041PH-0 x 75PH-1 x 100PH-2 x 125PH-3 x 150PH-4 x 20035689165200235270320356510016020010101055413.001413.011413.021413.031PZ-0 x 75PZ-1 x 100PZ-2 x 125PZ-3 x 15035681652002352703565100160555589UNE 16520ISO 8764DIN 5262UNE 16520ISO 8764DIN 526210ACLLONG-PHILLIPSACLPHILLIPS STUBBY11REF.409.111409.121A x Cmm.PH-1 x 250PH-2 x 300Diam.mm56Lmm350410grs.89130u.55REF.401.511401.521A x Cmm.PH-1x25PH-2x25Diam.mm56Lmm8585grs.3535u.1010121314111

1BI-MATERIAL SCREWDRIVERS21/4"6,30 mm.1/4"6,30 mm.3CLCL4REF.475.091Lmm.235Cmm.1251/4“ MAGNETIC BITDRIVERgrs.112u.5REF.475.391Lmm.2701/4” MAGNETIC BIT DRIVER,FLEXIBLE BLADECmm.160grs.135u.156UNE 16502ISO 691DIN 3125C7BLCLANUT DRIVERTORX ®8910REF.417.011417.021417.031417.041417.051417.061417.071417.081417.091417.101417.111417.121417.131417.141S3,244,555,567891011121314C125125125125125125125125125125125125125125B5,76,97,58,28,89,411,012,213,514,716,017,218,519,7L215215215250250250260260260260270270270270grs.606060707070120120120120155155155155u.55555555555555REF.414.101414.151414.201414.251414.271414.301414.401A x Cmm.T-10 x 75T-15 x 100T-20 x 100T-25 x 125T-27 x 125T-30 x 150T-40 x 150Diam.mm33,5455,567Lmm1165190190225225260260grs.3545457070105120u.10101010101051112ABL1314REF.190.461190.471190.481190.501S67810A9,41112,214,4B135135135135FLEXIBLE NUT DRIVERL260270270270grs.125125125125u.1111112

SETS OF BIMATERIAL SCREWDRIVERS123IN BLISTERIN CARDBOARD BOX4FOR ENGINEERSFOR ENGINEERSREF.459.131Pcs.6Contents0,5 x 3 x 75 / 0,8 x 4 x 1001 x 5,5 x 125 / 1,2 x 6,5 x 150PH-1 x 100 / PH-2 x 125grs.505u.1REF.459.201Pcs.6Contents0,5 x 3 x 75 / 0,8 x 4 x 1001 x 5,5 x 125 / 1,2 x 6,5 x 150PH-1 x 100 / PH-2 x 125grs.570u.15REF.459.141REF.Pcs.5Pcs.Contents0,5 x 3 x 75 / 0,8 x 4 x 1001,2 x 6,5 x 150PH-1 x 100 / PH-2 x 125Contentsgrs.435grs.u.1TORX ®u.REF.459.211Pcs.6Contents0,5 x 3 x 100 / 0,8 x 4 x 125 / 1 x 5,5 x 150PH-1 x 100 / PH-2 x 125100 - 250 V.L.FOR ELECTRICIANSgrs.505u.1TORX ®76459.151DISPENSERS5T-10 / T-20 / T-25 / T-30 / T-404951REF.459.221Pcs.6Contentsgrs.470T-10 x 75 / T-15 x 100 / T-20 x 100T-25 x 125 / T-27 x 125 / T-30 x 150u.18910REF.910.481910.411ContentsEmptyNº Pcs. 152Dimensions (mm)775 x 450 x 250775 x 450 x 250grs.3.80014.10011Contents0,4 x 2,5 x 750,5 x 3 x 750,6 x 3,5 x 1000,8 x 4 x 1001 x 5,5 x 1251,2 x 6,5 x 150PH-2 x 25Nº Pcs.888876PH-0 x 75PH-1 x 100PH-2 x 125PH-3 x 150Nº Pcs.87660,8 x 4 x 1001 x 5,5 x 1251,2 x 6,5 x 1501,6 x 8 x 1751,6 x 10 x 200Nº Pcs.6 T-10 x 75T-15 x 100T-20 x 100T-25 x 125T-30 x 150Nº Pcs.877761,2 x 6,5 x 25Nº Pcs.87666Nº Pcs.6REF.910.491910.191COMPOSITION0,5 x 3 x 750,8 x 4 x 1001 x 5,5 x 1251,2 x 6,5 x 150ContentsEmptyNº Pcs. 83Nº Pcs.8876Dimensions (mm)500 x 450 x 250500 x 450 x 2500,8 x 4 x 1001 x 5,5 x 1251,2 x 6,5 x 1501,6 x 8 x 1751,6 x 10 x 200Nº Pcs.87666grs.2.0308.500PH-0 x 75PH-1 x 100PH-2 x 125Nº Pcs.876121314113

1BIMATERIAL “T” HANDLE SCREWDRIVERS2UNE 16502ISO 691DIN 31253L 1CBCLL45REF.042.311042.321042.331042.341042.351042.361042.381042.401S22,53456810L1103103103136136185185185L150150150187194247247247C85858585105105105105HEXAGONALgrs.232528485973150210u.55555555REF.191.361191.371191.381191.401191.421191.431Size678101213L 1137164164164164164A91011,5141718C85105105105105105L187222222222222222NUT DRIVERgrs.587377100115120u.55555567UNE 16520ISO 8764DIN 5262CLL 1D8LTORX ®SCSOCKET DRIVER 1 /4”REF.TORXL 1LCgrs.u.REF.SCL1Lgrs.u.9460.101460.151460.201460.251460.301460.401T-10T-15T-20T-25T-30T-40103136136136185185150186186194246246858585105105105274242496197555555105.2211/4”105 441059011011“T” HANDLE SETS12HEXAGONALREF.Contentsgrs.u.13042.201 3, 4, 5, 6, 8 and 104001TORX ®REF.Contentsgrs.u.14460.701 T-10, 15, 20, 25, 30 and 404001114

INSULATED 1000 V1EN60900CLEN609002BASLOTTEDCLA3REF.418.011418.031418.041418.061418.091418.121418.131A x Cmm.0,4 x 2,5 x 1000,5 x 3 x 1000,6 x 3,5 x 1000,8 x 4 x 1001 x 5,5 x 1251,2 x 6,5 x 1501,2 x 8 x 175Diam.mm2,533,545,56,58Lmm165190190190225260295grs.3565394065100115u.1010101010105REF.419.001419.011419.021A x Cmm.PH-0x100PH-1x150PH-2x175Diam.mm356Lmm190260285grs.4080120PHILLIPSu.1010104567INSULATED 1000 V8EN60900IN CARDBOARD BOXEN60900IN BLISTERREF.459.231Uns.6Contents0,4 x 2,5 x 100 / 0,8 x 4 x 1001 x 5,5x125 / 1,2 x 6,5 x 150PH-1 x 150 / PH-2 x 175grs.580u.1REF.459.161Uns.6Contents0,5 x 3 x 100 / 0,8 x 4 x 1001 x 5,5 x 125 / 1,2 x 6,5 x 150PH-1 x 150 / PH-2 x 175grs.520u.191011REF.EN60900ContentsDimensions (mm)grs.12910.461910.401EmptyNº Pcs. 84500 x 450 x 250500 x 450 x 2502.0309.075COMPOSITIONPH-0 x 100PH-1 x 150PH-2 x 175Nº Pcs.8760,4 x 2,5 x 750,5 x 3 x 1000,6 x 3,5 x 1000,8 x 4 x 100Nº Pcs.88881 x 5,5 x 1251,2 x 6,5 x 1501,2 x 8 x 1751,6 x 10 x 200Nº Pcs.7661314115

1SET OF 6 ELECTRONIC SCREWDRIVERS234REF.459.601Description1,2x50 - 1,5x50 - 2x50PH00x50 - PH0x50 - PH1x5056ENGINEERS’SCREWDRIVERWOODEN HANDLEREVERSIBLEUNE 16516 - 16520 ISO 2380 - 87647ALSCBALNS C B8REF.S x C x ABPOUND THROUGHLgrs.u.REF.S x CNºABLgrs.u.405.451405.461405.5711,2 x 6,5 x 1251,2 x 8,5 x 1501,6 x 10 x 17567823025529085100155101010427.4111 x 6PH 26661604810910MAGNETIZER/DEMAGNETIZERTENSION ANDCONTINUITY TESTER11121314REF.Lgrs.458.02125090In plastic of high quality, with great impact resistanceu.1REF.630.151L210grs.33• For alternating and direct current• With 12 V battery• Luminous voltage scale• Continuity controlled by means of an acoustic and luminous signalu.1116

TESTERS1UNE 16516 ISO 2380UNE 16516 ISO 23802S CS CALAL3REF.S x C x AVLgrs.u.REF.S x C x AVLgrs.u.429.0310,5 x 3 x 65100 - 250 V140165429.0410,6 x 3,5 x 100100 - 250 V1853654UNE 16516 ISO 23805SCREF.S x C x AVLgrs.u.6AL429.101 0,5 x 3 x 55For use in garages.6 - 24 V1302457891011121314117

1HEX KEY WRENCHES2UNE 16519ISO 2936DIN ISO 29363SL2L14Steel: CrNiMoHardness: From 1,5 to 8 mm. 53÷57 HRc.From 9 to 14 mm. 49÷53 HRc.From 17 to 22 mm. 46÷50 HRc.Finishing: Nickel plated.SET567REF.Nickel plated040.001040.011040.021040.031040.041040.051040.061040.071040.081040.091040.101040.121040.141040.171040.191040.221REF.Black finish045.001045.011045.021045.031045.041045.051045.061045.071045.081045.091045.101045.121045.141045.171045.191045.221S1,522,53456789101214171922L147525966748596102108114122137154177199222L2151821232933384144475057708089102grs.0,81,635101829415776100163253427600910u.1010101010101010105551111REF.041.011041.071041.021041.091041.031041.101041.041041.051041.061Desig.N. 0N. 6N. 1N. 8N. 2N. 9N. 3N. 4N. 5Nº Pcs.68101113155912Contents2 - 2,5 - 3 - 4 - 5 - 62 - 2,5 - 3 - 4 - 5 - 6 - 7 - 82 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 - 122 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 -10 - 122 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 -12 - 14 - 17 - 192 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 -12 - 14 - 17 - 19 - 221/8 - 5/32 - 3/16 - 7/32 - 1/41/8 - 5/32 - 3/16 - 7/32 - 1/4 - 5/16 -3/8 - 7/16 - 1/21/8 - 5/32 - 3/16 - 7/32 - 1/4 - 5/16 -3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 3/4NICKEL PLATEDgrs.761804605301.8052.830955801.8658Hardness: From 1/16 to 5/16” 53÷57 HRc.From 3/8 to 9/16” 49÷53 HRc.From 5/8 to0 3/4” 46÷50 HRc.Finishing: Black finish.91011REF.Nickel plated040.541040.011040.561040.581040.041040.601040.611040.621040.641040.661040.681040.701040.731040.191REF.Black finish045.541045.011045.561045.581045.041045.601045.611045.621045.641045.661045.681045.701045.731045.191S1/165/643/321/85/323/167/321/45/163/87/161/25/83/4L147525966748590,596108122129145168199L215182123293335,538445053637689grs.11,6351016243260100140182370601u.555510555551111REF.046.011046.021046.091046.031046.101Desig.N. 20N. 21N. 28N. 22N. 29Nº Pcs.610111315Contents2 - 2,5 - 3 - 4 - 5 - 62 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 - 122 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 -10 - 122 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 -12 - 14 - 17 - 192 - 2,5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 -12 - 14 - 17 - 19 - 22BLACK FINISHgrs.761804601.8052.83012046.041046.051046.061N. 23N. 24N. 2559121/8 - 5/32 - 3/16 - 7/32 - 1/41/8 - 5/32 - 3/16 - 7/32 - 1/4 - 5/16 -3/8 - 7/16 - 1/21/8 - 5/32 - 3/16 - 7/32 - 1/4 - 5/16 -3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 3/4955801.86513RING SETSNICKEL PLATEDREF.Desig.Nº Pcs.Contentsgrs.14041.111041.121N. 30N. 31682 - 2,5 - 3 - 4 - 5 - 62 - 2,5 - 3 - 4 - 5 - 6 - 8 - 1077240118

HEX KEY WRENCHES123NICKEL PLATED HEX KEY WRENCH SET, IN PLASTIC HOLDERBLACK FINISH HEX KEY WRENCH SET, IN PLASTIC HOLDER4REF.Nº Pcs.Contentsgrs.REF.Nº Pcs.Contentsgrs.041.151041.161691,5 - 2 - 2,5 - 3 - 4 - 51,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 1078284046.151046.161691,5 - 2 - 2,5 - 3 - 4 - 51,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 1078284567KNIFE SETKNIFE SETREF.Desig.Nº Pcs.ContentsBLACK FINISHgrs.REF.Desig.Nº Pcs.ContentsBLACK FINISHgrs.8046.201046.211046.221N. 39N. 40N. 417671,5 - 2 - 2,5 - 3 - 4 - 5 - 62,5 - 3 - 4 - 5 - 6 - 82,5 - 3 - 4 - 5 - 6 - 8 - 10130170275BALL POINT HEX KEY WRENCH046.301046.311N. 42N. 43673/32, 1/8, 5/32, 3/16,1/4, 5/163/32, 1/8, 5/32, 3/16,1/4, 5/16, 3/82203709UNE 16519ISO 2936DIN ISO 293610SSteel: CrNiMoHardness: From 1,5 to 8 mm. 53÷57 HRc.From 9 to 14 mm. 49÷53 HRc.L2L1Finishing: Black finish.11REF.045.801045.811045.821045.831045.841045.851045.861045.871045.881045.891045.901045.921045.941S1,522,53456789101214L191,5102114,5129144165186197208219234262294L215182123293338414447505770grs.1,435817315164100134175283439u.5555555551111REF.046.251046.261Nº Pcs.69SET IN PLASTIC HOLDERContents1,5 - 2 - 2,5 - 3 - 4 - 51,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10grs.105451121314119

1BALL POINT HEX KEY WRENCHES2UNE 16519ISO 2936DIN 911Steel: CrVHardness:Finishing: Black finish.From 1,5 to 8 mm. 53÷57 HRc.From 10 to 12 mm. 49÷53 HRc.SREF.SL1L2grs.u.34L2L1S047.001047.011047.021047.031047.041047.051047.061047.081047.101047.1211,522,534568101291,5102114,5129144165186208234262151821232933384450571,43581731501001712755555555511567REF.048.011048.021Nº Pcs.69SET IN PLASTIC HOLDERL21,5 - 2 - 2,5 - 3 - 4 - 51,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10grs.105451REF.048.051048.061Nº Pcs.69MAGNETIC SETIN PLASTIC HOLDERContents1,5 - 2 - 2,5 - 3 - 4 - 51,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10grs.1304718910REF.048.101Nº Pcs.13BALLPOINT LONG HEX KEY WRENCH SETContents0,05 - 1/16 - 5/64 - 3/32 - 7/64 - 1/8 -9/64 - 5/32 - 3/16 - 7/32 - 1/4 - 5/16 - 3/8u.11REF.049.011Nº Pcs.7L22,5 - 3- 4 - 5 - 6 - 8 - 10KNIFE SETgrs.28011TORX ® KEY WRENCHES121314Hardness: 54÷58 HRcMaterial: CrVFinishing: Black finishL2L1EREF.457.061457.071457.081457.091457.101457.151457.201457.251457.271457.301457.401457.451457.501TorxT-6T-7T-8T-9T-10T-15T-20T-25T-27T-30T-40T-45T-50E2,52,52,53,03,04,04,05,05,06,07,08,09,0L175808080869095100105114124133152L215161616171819202124262932grs.44,44,655,41010,5171929436188u.5555555555511120

TORX ® KEY WRENCH SETS123SET IN PLASTIC HOLDERSET IN PLASTIC HOLDERWITH MAGNETIZER4REF.458.031458.041Nº Pcs.58ContentsT-9, T-10, T-15, T-20, T-25T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40grs.89201REF.458.061Nº Pcs.Contents8 T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40grs.226567SET IN BAGKNIFE SET8REF.Nº Pcs.Contentsgrs.REF.Nº bocasContentsgrs.458.0717T-10, T-15, T-20, T-25, T-27, T-30, T-40150458.1018T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-402059BALLPOINT TORX ® KEY WRENCHES10E11Hardness: 54÷58 HRcMaterial: CrVFinishing: Black finishREF.453.091453.101453.151453.201453.251453.271453.301453.401453.451453.501TorxT-9T-10T-15T-20T-25T-27T-30T-40T-45T-50E3,03,04,04,05,05,06,07,08,09,080869095100105114124133152"Torx ® is the registered trademark of Camcar Division of Textron Inc."L1L216171819202124262932L2grs.45710142230466182L1u.1111111111REF.453.911453.901Nº Pcs.58SET IN PLASTIC HOLDERContentsT-9, T-10, T-15, T-20, T-25T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40grs.89201121314121

1TAMPER RESISTANT TORX ® KEY WRENCHES23E45Hardness: 54÷58 HRcMaterial: CrVFinishing: Black finishREF.454.091454.101454.151454.201454.251454.271454.301454.401TorxT-9T-10T-15T-20T-25T-27T-30T-40E3,03,04,04,05,05,06,07,0L180869095100105114124L21617181920212426L2grs.45810,517192943L1u.55555555SET IN BAGREF. Nº Pcs.Contentsgrs.454.011 7 T-10, T-15, T-20, T-25, T-27, T3-0, T-40 150"Torx ® is the registered trademark of Camcar Division of Textron Inc."678SET IN PLASTIC HOLDERKNIFE SET9REF.454.031454.041Nº Pcs.58Contents u.T-9, T-10, T-15, T-20, T-25T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-4011grs.89201REF.454.021Nº Pcs.Contents8 T-9, T-10, T-15, T-20, T-25, T-27, T-30, T-40grs.200u.110HEX KEY WRENCH XZN11L212HEX KEY WRENCH XZNL11314REF.461.051461.061461.081461.101461.121461.141461.161XZNM5M6M8M10M12M14M16L1758698110124139156L230344046525972grs.15254080125190300u.5555555SET IN BAGREF. Nº Pcs. Contentsgrs.461.011 7 M5 - M6 - M8 - M10 - M12 - M14 - M16 825122

1/4” BITS1In order to guarantee a good service to our customers, we do not supply bits in quantities different from multiples of the pack quantity (u.) determined for each code.UNE 16506 ISO 2351UNE 16506 ISO 2351SSCC1/4"1/4"2L6,30 mm.SLOTTEDL6,30 mm.LONG SLOTTED BITS3REF.S x CLgrs.u.REF.S x CLgrs.u.475.111475.121475.131475.141475.151475.1610,5 x 40,6 x 4,50,8 x 5,51 x 61,2 x 6,51,6 x 8252525252525455556101010101010475.611475.621475.631475.641475.651475.6610,5 x 40,6 x 4,50,8 x 5,51 x 61,2 x 6,51,6 x 8505050505050910111212155555554UNE 16520 ISO 8764UNE 16520 ISO 87645N1/4"N1/4"L6,30 mm.PHILLIPSL6,30 mm.LONG PHILLIPS, BITS6REF.S x CLgrs.u.REF.NºLgrs.u.475.211475.221475.231PH-1PH-2PH-3252525555555475.711475.721475.731PH-1PH-2PH-35050505555557100 UNITS PACKS:475.218PH-1475.228PH-22525500500118UNE 16520 ISO 8764N1/4"UNE 16520 ISO 8764N1/4"9L6,30 mm.L6,30 mm.REF.NºLTITANIUM COATEDPHILLIPS BITSgrs.u.REF.NºLTITANIUM COATEDLONG PHILLIPS BITSgrs.u.10475.171475.181475.191PH-1 TINPH-2 TINPH-3 TIN252525556555475.671475.681475.691PH-1 TINPH-2 TINPH-3 TIN50505010121255511UNE 16520 ISO 8764/1UNE 16520 ISO 8764/1N1/4"N°1/4"12L6,30 mm.L6,30 mm.REF.NºLgrs.POZIDRIVu.REF.NºLLONG POZIDRIV BITSgrs.u.13475.311475.321475.331PZ-1PZ-2PZ-3252525666555475.811475.821475.831PZ-1PZ-2PZ-350505011121255514123

11/4” BITS2In order to guarantee a good service to our customers, we do not supply bits in quantities different from multiples of the pack quantity (u.) determined for each code.UNE 16506 ISO 23513LS1/4"6,30 mm.LS1/4"6,30 mm.TORX ®LONG TORX ® BITS45REF.475.501475.581475.591475.601475.511475.521475.531475.541475.551475.561475.571ST-6T-7T-8T-9T-10T-15T-20T-25T-27T-30T-40L2525252525252525252525grs.44555555667u.1010101010101010101010REF.475.741475.751475.761475.771475.781475.791475.801UNE 16506 ISO 2351ST-10T-15T-20T-25T-27T-30T-40L50505050505050grs.9101010101113u.555555561/4"SL6,30 mm.87UNE 16510 ISO 3109SL1/4"6,30 mm.HEX BITSREF.475.241475.251475.261475.271475.281475.291475.301ST-10T-15T-20T-25T-27T-30T-40L25252525252525TORX ® TAMPER RESISTANTgrs.5555667u.5555555REF.SLgrs.u.9475.411475.421475.431475.441475.4513456825252525255566101010101051/4"6,30 mm.1011REF.475.941475.951475.961475.971475.9815,5781013MAGNETIC NUTSETTER 1 /4“L5050505050grs.3030303030u.333331/4"6,30 mm.UNE 16509ISO 3317DIN 742812BLBL1/4"6,30 mm.13REF.BLMAGNETIC HOLDERgrs.u.REF.ADAPTER FOR MACHINE 1 /4“ AND 3 /8“BLgrs.u.14475.081*475.101* With retaining ring.505075754242105475.041475.0511/4”1/4”Connection with pin.1/4”3/8”8125050152155124

1/4” BITS1ISO 1173DIN 3126 / 74272AMAGNETIC ADAPTER 1 /4“WITH QUICK RELEASE SYSTEMCLADAPTER 1/4” FOR BITS1/4“ WITH MAGNETIC SCREWHOLDER3REF.475.061475.071Amm- 6,3- 6,3Cmm2228L5075grs.2535u.33REF.475.021Amm.- 6,3Cmm.25Lmm.82grs.37u.541/4” BIT DISPENSER56Plastic box105 x 60 x 30 mm.7DISPENSER WITH 20 SETS OF 30BITS+ADAPTER+BIT HOLDER* Sets are only sold in 20 set dispenser.BIT DISPENSER 1/4”REF.ContentsPzas.475.011Contains 20 sets of 30 bits+adapter+bit holder 6406 Slotted 0,5x4 / 0,6x4,5 / 0,8x5,5 / 1x6 / 1,2x6,5 / 1,6x86 Hexagonal 3, 3, 4, 4, 5, 68 Tamper resistant Torx T-10, T-15, T-20, T-20, T-25, T-30, T-30, T-405 Phillips PH-1, PH-1, PH-2, PH-2, PH-35 Pozidriv PZ-1, PZ-1, PZ-2, PZ-2, PZ-31 magnetic adapter with quick release system1 Bit holder 1/4”89In order to guarantee a good service to our customers, we donot supply bits in quantities different from multiples of thepack quantity (u.) determined for each code.REF.910.641910.651DenominationDispenser with bitsEmpty dispenserDimensions (mm)340 x 300 x 250Pzas.340u.1110COMPOSITION0,5 x 40,6 x 4,50,8 x 5,51 x 61,2 x 6,51,6 x 825 mm25 mm25 mm25 mm25 mm25 mmNº Pcs.101010101010Nº Pcs.PZ-1PZ-2PZ-325 mm25 mm25 mmNº Pcs.101010Nº Pcs.T-10T-15T-20T-25T-27T-30T-4025 mm25 mm25 mm25 mm25 mm25 mm25 mmNº Pcs.101010101010101112The dispenser has additional spaces to put sizesthat are not included in the contents."Torx ® is a registered trademark of Camcar Division de Textron Inc.”PH-1PH-2PH-30,5 x 40,6 x 4,50,8 x 5,51 x 61,2 x 6,525 mm25 mm25 mm50 mm50 mm50 mm50 mm50 mm101010Nº Pcs.10101010103456PH-1PH-2PH-325 mm25 mm25 mm25 mm50 mm50 mm50 mm10101010Nº Pcs.101010PZ-1PZ-2PZ-350 mm50 mm50 mmNº Pcs.1010101314125

1IMPACT SCREWDRIVER2UNE 165965/16"8 mm.1/2"12,5 mm.3ACL´L4REF. C L A L’ grs.REF.Designation470.011 33 132 24 40 655470.051Bit holder55/16” BITSIn order to guarantee a good service to our customers, we do not supply bits in quantities different from multiples of the pack quantity (u.) determined for each code.6UNE 16506 ISO 2351 UNE 16510 ISO 3109L5/16"L5/16"7SC8 mm.S8 mm.SLOTTEDHEX BITS89REF.470.481470.491470.501470.511470.521470.531S x C0,8 x 5,51,2 x 6,51,2 x 81,6 x 102 x 122,5 x 14Serie extradura470.801470.8111,2 x 81,6 x 9470.821 2 x 12Contents414141414141414141grs.111215202429141724u.555555555REF.470.701470.711470.721470.731470.741470.751S4567810L303030303030grs.8910111316u.55555510UNE 16520 ISO 876411L5/16"L5/16"N8 mm.S8 mm.12PHILLIPSTORX ®REF.NºLgrs.u.REF.Smm.Lgrs.u.1314470.591470.601470.611470.621Extra hard serie470.901470.911470.921PH-1PH-2PH-3PH-4PH-2PH-3PH-432323238323232111111141111115555555470.401470.411470.421470.431470.441470.451470.461470.471T-20T-25T-27T-30T-40T-45T-50T-553,844,404,965,496,607,778,7911,1735353535353535358911111213142155555555126

SETS1UNE 16596 Metal box 170 x 60 x 45234REF.471.011REF.471.021REF.471.031DesignationNº Pcs.Judestor 113Contents: Impact screwdriver 470.01Slotted bits 8 - 10 - 12Phillips bits PH2-3-4Hex bits 4-5-6-7-8-10DesignationNº Pcs.Judestor 27Contents: Impact screwdriver 470.01Slotted bits 8-10-12Phillips bits PH2-3-4DesignationNº Pcs.Judestor 35Contents: Impact screwdriver 470.01Slotted bits 10-12Phillips bits PH2-3grs.1.140grs.1.055grs.1.015REF.471.041REF.471.061DesignationJudestor 413Contents: Impact screwdriver 470.01Extra hard slotted bits 8 - 9 - 12Extra hard Phillips bits PH2-3-4Hex bits 4-5-6-7-8-10DesignationNº Pcs.Nº Pcs.Judestor 613Contents: Impact screwdriver 470.01Slotted bits 8 - 10 - 12Extra hard Phillips bits PH2-3-4Torx® bits T-25-27-30-40-45-50grs.1.140grs.1.1257568UNE 16596Plastic box 205 x 130 x 45910REF.471.071DesignationNº Pcs.Judestor 723Contents: Impact screwdriver 470.01Slotted bits 5,5 - 6,5 - 8 - 10 - 12 - 14Phillips bits PH 1-2-3-4Hex bits 4-5-6-7-8-10Torx® bits T-25-27-30-40-45-50"Torx ® is the registered trademark of Camcar Division of Textron Inc."grs.1.17011121314127

1234567891011121314128

123456788 STRIKINGTOOLS910Ref. 501.061page 130Ref. 511.511page 132Ref. 530.261page 13411Ref. 505.061page 130Ref. 511.021page 130Ref. 521.011page 133Ref. 522.221page 133Ref. 529.021page 134Ref. 529.251page 13412Ref. 513.021page 131Ref. 515.021page 131Ref. 523.121page 133Ref. 525.711page 133Ref. 534.241page 135Ref. 721.021page 1371314

1COLD CHISELSFLAT COLD CHISELS2UNE 16567CHROME VANADIUMDIN 7250CHROME MOLIB. VANADIUM3SLASLBAREF.LSAgrs.u.REF.LSAxBgrs.u.4501.061501.071501.081501.101501.121150175200250300182122252610111213141331922433575521010101010504.061504.071504.081504.101504.121150175200250300212428283211x1712x2013x2313x2313x26181269390500602555555CAPE CHISELSFLAT CAPE CHISELS6UNE 16568CHROME VANADIUMDIN 7250CHROME MOLIB. VANADIUM7SLBASLBAREF.LSAxBgrs.u.REF.LSAxBgrs.u.8505.061505.081505.1011502002506,58,59,511x1712x2114x24129241404555506.061506.071506.08115017520067811x1712x2013x231522313355559UNE 16574ROUND CENTREPUNCHESCHROME VANADIUMDIN 7250OCTOGONAL CENTREPUNCHESCHROME MOLIB. VANADIUM10LBSBASLA1112REF.511.021511.041511.051511.061511.081S2,54568L100105110115130A8881012B3535404550grs.3134376098u.1010101010REF.512.101512.121S45L120120A1012B4040grs.6288u.10101314REF.511.911511.921Nº Pcs.45ROUND CENTRE PUNCH SETSContent2,5 - 4 - 6 - 82,5 - 4 - 5 - 6 - 8grs.234275130

TAPER PUNCHESOCTOGONAL TAPERPUNCHES1UNE 16576CHROME VANADIUMDIN 6458CHROME MOLIB. VANADIUM2LBREF.SLABSgrs.Bu.AREF.SLABSgrs.u.LA3513.021513.031513.041513.051513.061513.081513.1012345681010010011511513015017088101012121435354545505560313255599411718310101010101010514.021514.031514.041514.051514.0612345612012012012012010101010124040404040606062649355555456SETSETREF.513.911513.921Nº Pcs.57Content2 - 4 - 6 - 8 - 102 - 3 - 4 - 5 - 6 - 8 - 10grs.502602REF.519.911Nº Pcs.6ContentTaper punches 2 - 3 - 4 - 5 - 6Center punch 4grs.4097UNE 16575PARALLEL PINPUNCHESDIN 6450OCTOGONAL PARALLELPIN PUNCHES8CHROME VANADIUMCHROME MOLIB. VANADIUMSBLASBLA9REF.515.021515.031515.041515.051515.061515.071515.081515.091515.101S2345678910L100100100115115115130130130A888101010121214B282828333333434353grs.2930315355589196143u.101010101010101010REF.516.021516.031516.041516.051516.061516.081S234568L150150150150150150A101010101012B354050505055grs.6363636470106L555555101112SETSET13REF.Nº Pcs.Contentgrs.REF.Nº Pcs.Contentgrs.515.91192 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10622519.92162 - 3 - 4 - 5 - 6 - 840914131

1ROUND PARALLEL PINPUNCHES, LONG SERIESOCTOGONAL PINPUCHES, LONG SERIES2UNE 16575CHROME VANADIUMCHROME MOLIB. VANADIUMLB3REF.SLABSgrs.Bu.AREF.SLABSgrs.u.LA4517.021517.031517.041517.051517.061517.0812345681201301351401451508881010123040455055603335376064100555555518.041518.06146175175101080806172555EXTRAFLAT COLD CHISELCHROME MOLIB. VANADIUM6SETSLBAREF.SContentgrs.REF.LSABgrs.u.517.91162 - 3 - 4 - 5 - 6 - 8355502.0912302672628557ELECTRICIANS’ COLD CHISELSCROMO MOLIBDENO VANADIO8910REF.503.081503.101503.121L200250300S121212A888Sgrs.93119142Lu.555AREF.519.931Nº Pcs.6ContentCold chisel 150, Ref. 504.06Cape chisel 150, Ref. 506.06Centre punch 4, Ref. 512.10Taper punch 3, Ref. 514.03Taper punch 4, Ref. 514.04Parallel pin punch 5, Ref. 516.05grs.600SET11SCRIBER121314REF.511.501L (mm)150u.1REF.511.511511.521L (mm)150Spare partu.1132

BALL PEIN HAMMERSJOINER’S HAMMER12REF.Descr.HeadweightABLmm.BHANDLE WITH WEDGESHICKORY HANDLEAgrs.u.LREF.TRIMATERIAL HANDLE, WITHFIBERGLASS CORE AND COVEREDWITH POLIPROPILENE ANDELASTOMERE FOR A GOOD GRASPDescr.HeadweightABLmm.BAgrs.u.L34521.011521.021521.031521.041521.051521.061521.071521.081ABCDEFGH2253404555606809101.1351.36025273033353738407887971061161271341443183183183183433433783853504655806858551.0851.3601.56511111111522.221522.231522.241522.251522.261522.271ABCDEF1551702052703804601820222528308191991071101202802822882913093112502653303955406201111115RIVOIR HAMMER6Wooden handleREF.521.201521.211521.251521.271BALL PAIN HAMMER HANDLEForAB/C/DE/FG/HREF.525.711525.731525.751525.761525.771525.781Size263035404550Headweight3104757259651.2051.415A263035404550B8091102106125135Lmm.261281301334361391BAgrs.3755708301.1001.4651.810u.L111111879BCLAW HAMMERTRIMATERIAL HANDLE, WITHFIBERGLASS CORE AND COVEREDWITH POLIPROPILENE ANDELASTOMERE FOR A GOOD GRASPALB10REF.521.521521.531521.541521.551521.561521.571521.581Descr.BCDEFGHHeadweight3404555606809101.1351.360A27303335373840B90100108120131139148Lmm.317320324335337387390grs.4956107159051.1351.3951.620u.1111111REF.523.121523.131523.141Descr.ABCHeadweight350475550A28,231,131,6B107,3118,3125,5CONICAL HANDLELmm.330330330Agrs.500625700u.111L1112Fiber glass handleREF.523.211523.231CLAW HAMMER HANDLEclaw hammer A/Bclaw hammer C1331314

134BLACK RUBBER MALLETREF.529.251529.261529.271529.291A55657590B90115125139Lmm.320340360360grs.250440600720FOR FLOORING AND WALLSABu.111grs.152250Bmm.283544Amm.192227REF.529.071529.081529.091NYLON FACEDMETAL HANDLE, RUBBER GRIPu.666grs.3256501.105L255285300A80100125S283544REF.529.021529.031529.041ALSNYLON FACEDHAMMERSWOODEN HANDLEu.66666grs.1452605001.0101.480L215270295345380A6580100125140S2228354455REF.529.151529.161529.171529.181529.191ABNYLON FACEDu.11111grs.5070110150170Mod.2228354455REF.529.751529.761529.771529.781529.791NYLON HAMMER HANDLENYLON FACEDHAMMERSu.111grs.5001.0001.560L370390420A115120125S355060REF.529.611529.621529.631WOODEN HANDLELSAABANTIREBOUND NYLON FACED HAMMERu.111grs.205090Bmm.355060Amm.252830REF.529.701529.711529.721ANTIREBOUND NYLONFACED HAMMERSu.111grs.90140215Mod.355060REF.529.801529.811529.821ANTIREBOUND HAMMER HANDLEALSu.11grs.1.1801.430Lmm.290290B128138A3843Headweight1.0001.250Descr.ABREF.530.261530.311CONICAL HANDLESPANISH HAMMER HANDLEspanish hammer A/BREF.530.611SPANISH STONINGHAMMERABLALBØINT.91013u.11111grs.1015205080Bmm.2228354455Amm.1219222732REF.529.061529.071529.081529.091529.101ØINT.891013161413121110987654321

FILES1• Top quality European steel: High chrome and carbon content affording the fileresistance and hardness.• Impeccable control of the surface grinding operations and the subsequent cut of theteeth.• Tempering the file to reach a hardness of 65 HRc.• Particular attention to the washing operation and especially to the corrosion inhibitorapplied to each file.• Laser marking for greater flexibility and improved management of the stock.• Diverse quality control checks throughout the process.2345New bimaterial handleComfortable non-slip grip.Smooth contour.Security: reduce muscle tension.Tells the user which way the file is.6No sharp edges exposed to the fingers.It prevents excessive force being applied.Smooth connection between the file and the handle.Gentle connection between the handle and the file.Large hanging hole.7ENGINEERS’ FILESISO 234/1 & 2HARDNESS: 63÷65 HRcISO 234/1 & 2HARDNESS: 63÷65 HRc89BAA ØFLAT FILE• To file flat surfaces, corners and general polish. It’s facilitates anglesand corners access.• Double pitted and simple edges pitted.LROUND FILE• To file holes, concave surfaces.• Double surface pitted.L10REF.BASTARDLABgrs.Teeth/“u.REF.BASTARDLAgrs.Teeth/ “u.11534.521534.531534.541534.551534.821150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”350 mm - 14”162025303545666,590160275413615131098766666534.601534.611534.621534.631534.841150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”350 mm - 14”67,59,510125910217429248513109876666612SECOND CUTSECOND CUTREF.534.241534.251534.261534.711534.771534.831L100 mm - 4”150 mm - 6”200 mm - 8”200 mm - 10”300 mm - 12”350 mm - 14”A121620253035B2,545666,5grs.2760130275413615Teeth/ “221814121110u.666666REF.534.301534.311534.321534.721534.781534.851L100 mm - 4”150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”350 mm - 14”A467,59,51012grs.3959102174292485Teeth/ “221814121110u.6666661314135

1ENGINEERS’ FILES2ISO 234/1 & 2HARDNESS: 63÷65 HRcISO 234/1 & 2HARDNESS: 63÷65 HRcB3LALA4FLAT FILE• To file flat surfaces, corners and general polish.• Double surface pitted, simple pitted edge, no pitted.REF.BASTARDLABgrs.Teeth/ “u.THREE SQUARE• To file and polish angles, inside corners, concave surfaces and flat files.• Double pitted surface.REF.SECOND CUTLABgrs.Teeth/ “u.5534.561534.571534.581534.591534.861150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”350 mm - 14”162025303545666,590160275437650131098766666534.331534.341534.351534.741100 mm - 4”150 mm - 6”200 mm - 8”250 mm - 10”8111517,51957160275195716027522181412666667REF.534.271534.281534.291534.731534.791534.871SECOND CUTL100 mm - 4”150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”350 mm - 14”A121620253035B2,545666,5grs.3073145280437650Teeth/ “221814121110u.6666668ISO 234/1 & 2HARDNESS: 63÷65 HRcISO 234/1 & 2HARDNESS: 63÷65 HRc9A10HALF ROUND• To file flat surfaces, concaves and big holes. Ideal for polish.• Double pitted surface.LBSQUARE• To file grooves square and rectangular holes, internal corners and fine adjustment.• Double surface pitted.LØA11REF.BASTARDLABgrs.Dientes / “u.REF.SECOND CUTLAgrs.Dientes / “u.12534.681534.691534.701534.801534.881150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”350 mm - 14”16202531354,55691082157273480675131098766666534.391534.401534.411534.761100 mm - 4”150 mm - 6”200 mm - 8”250 mm - 10”4,568104566129212221814126666SECOND CUTREF.LABgrs.Dientes / “u.13534.361534.371534.381534.751534.811100 mm - 4”150 mm - 6”200 mm - 8”250 mm - 10”300 mm - 12”10,51620253134,5679155212727348022181412116666614136

ENGINEERS’ FILES1234DISPENSERREF.534.951534.961Dimensions555 x 520 x 300555 x 520 x 300Composition534.25534.26534.71534.31534.32534.72534.35534.37534.38534.75ContentemptyN.º pieces 60Flat file“ ““ “Round file““Three squareHalf round“ ““ “6” E8” E10” E6” E8” E10” E8” E6” E8” E10” Egrs.4.20012.4006 unid.“““““““““REF.534.501Nº Pcs.6LComposition534.261 Hand file 8”534.291 Flat file 8”534.321 Round file 8”534.351 Three square 8”534.381 Half round 8”534.411 Square 8”FILES SET567HANDLES FOR FILESREF.SizeLgrs.u.CLEANING BRUSH*534.421534.431534.441*534.451534.461534.491534.471534.5113,2455,278913* Black monomaterial handle.11011011011011011011011045454545454545456666666689CORRESPONDENCE HANDLES-FILES10Profiles of files4”6”8”10”12”14”REF.721.021mm.70 x 55 x 175grs.70u.1Flat fileFlat fileHalf roundRound fileSquareThree square–5,25,23,23,23,255544499955799977713131381313131311121314137

1234567891011121314138

123456789 PLIERS,PINCERS,BOLT CUTTERS910Ref. 601.461page 141Ref. 609.271page 142Ref. 632.091page 147Ref. 634.311page 148Ref. 651.111page 155Ref. 664.081page 15611Ref. 613.291page 143Ref. 641.301page 149Ref. 661.051page 15612Ref. 624.081page 143Ref. 621.751page 146Ref. 641.571page 153Ref. 645.011page 154Ref. 658.421page 157Ref. 658.101page 1581314

1PLIERS2345678Assured hardness58÷62 HRc.It gets longer the strength of cutting.Tri-lobular jointIt improves the play and minimizeslooseness.Stylized designIt helps the access to difficult areas and increases the leverage,therefore the cutting effort is lower.Highest quality steelRef. 601, 602, 624, 625, 626Special cutting steelIt optimizes the cuting capacity of the pliers along its life.Ref. 604, 608, 609, 612, 613, 629Chrome vanadium steelLonger strength of the pliersLESS 420EFFORT440460480500520540HIGHER 560EFFORT 580Nº OF CUTSa perfect combinationof materials Gripping zoneA non-slipping material, elastomer, for gripping areas. Handling zoneSlipping material, Polypropylene, for opening and closing areas. Indelible markingsSantoprene letters raising from the neighbouring, Polyproline. A unique trait!Nº of cutsN CUTTING EFFORT COMPARATIVE TEST 601 - 180 mm. Irimo Others1 500 1000 1500 2000 2500 3000 3500 4000 4500 5000MINIMUM EFFORT IN ALL THE LIFE OF PLIER!special design9 Protection and extra-gripPreventing the hand from reaching a dangerous area, too closefrom the head and helping the hand to be automatically in theright working position. ErgonomicsCurved profile: optimized hand contact.10 Efficiency12% more of gripping surface. Guarantees an steady grip anda better transmission of force.11121314capacity of cuts (CT) andwire depends on UNE DIN-ISOW140TYPE OF WIRESoft wireMMedium-hard wireSpring wireHTensilestrengthCopper230 N/mm 2-23 kg/mm 2Bronze780 N/mm 2-78 kg/mm 21.600 N/mm 2-160 kg/mm 2ØmmRef.0,5 62411,251,51,61,42.100-2.250 1,6Hard wire-N/mm 2210-225 kg/mmPiano wire2 1,82Wire according to UNE 16.526 ISO 5744.601, 602, 612, 613632625, 626601, 602, 624,612, 613, 631, 632626625, 626625625, 6261Black finishPVC Dipped Handles2Chromed PlatedBimaterial HandleAEpoxy PaintedBlackfinishes

COMBINATION PLIERS1UNE 16528DIN - ISO 5746UNE 16528DIN - ISO 57462CL3ABTotal hardness: 45÷50 HRcHardness at the cutting edge: 60÷63 HRcSPECIAL CUTTING STEELTotal hardness: 45÷50 HRcHardness at the cutting edge: 60÷63 HRcSPECIAL CUTTING STEEL4REF.601.411601.421601.431Lmm.160180200A232629B333741C111212grs.179266330CT: Ø mm.W M H2,73422,531,822,5Finish111u.555REF.601.461601.471601.481Lmm.160180200A232629B333741C111212grs.179266330CT: Ø mm.W M H2,73422,531,822,5Finish111u.5555UNE 16528DIN - ISO 5746COMBINATION PLIERSUNE 16528DIN - ISO 574667CTotal hardness: 45÷50 HRcHardness at the cutting edge: 60÷63 HRcSPECIAL CUTTING STEELABLTotal hardness: 45÷50 HRcHardness at the cutting edge: 60÷63 HRcSPECIAL CUTTING STEEL8REF.602.411602.421602.431Lmm.160180200A232629B333741C111212grs.190268337CT: Ø mm.W M H2,73422,531,822,5Finish111u.1055REF.602.461602.471602.481Lmm.160180200A232629B333741C111212grs.190270340CT: Ø mm.W M H2,73422,531,822,5Finish222u.5559FLAT NOSE PLIER10UNE 16527DIN - ISO 5745UNE 16527DIN - ISO 57451112ADTotal hardness: 45÷50 HRcCHROME VANADIUM STEELSERRATED GRIPPINGREF.LABCDECEDBFinishLu.REF.LABCDEgrs.Total hardness: 45÷50 HRcCHROME VANADIUM STEELSERRATED GRIPPINGFinishu.13604.141604.16114016014,516,539498,08,52345120170111010604.26116016,5498,5351702514141

1ROUND NOSE PLIER2UNE 16527DIN - ISO 5745UNE 16527DIN - ISO 574534Total hardness: 45÷50 HRcCHROME VANADIUM STEELSERRATED GRIPPINGEABCLTotal hardness: 45÷50 HRcCHROME VANADIUM STEELSERRATED GRIPPINGREF.LABCEgrs.Finishu.REF.LABCEgrs.Finishu.5608.141608.16114016016163742771,51,5100115111010608.261160164271,5120256UNE 16527DIN - ISO 5745FLAT LONG NOSE PLIERUNE 16527DIN - ISO 574578Total hardness: 45÷50 HRcCHROME VANADIUM STEELFLAT JAWSAEDBCLTotal hardness: 45÷50 HRcCHROME VANADIUM STEELFLAT JAWS9REF.609.171L180A17B65C9D2E8grs.147Finish1u.5REF.609.271L180A17B65C9D2E8grs.170Finish2u.510UNE 16527DIN - ISO 5745SNIPE NOSE PLIERS, STRAIGHT JAWSUNE 16527DIN - ISO 57451112A13Total hardness: 45÷50 HRcHardness and cutting edge: 58÷62 HRcCHROME VANADIUM STEELSERRATED GRIPPING – SIDE CUTTINGREF.LABCEgrs.CT: Ø mm.W MEFinish u.BCLREF.LABCEgrs.Total hardness: 45÷50 HRcHardness and cutting edge: 58÷62 HRcCHROME VANADIUM STEELSERRATED GRIPPING – SIDE CUTTINGCT: Ø mm.W MFinish u.14612.161612.19116020016174972892,52,5150160111,61,6111010612.261612.29116020016174972892,52,5160170111,61,62255142

SNIPE NOSE PLIERS, BENT JAWS1UNE 16527DIN - ISO 5745UNE 16527DIN - ISO 574523Total hardness: 45÷50 HRcHardness and cutting edge: 58÷62 HRcCHROME VANADIUM STEELSERRATED GRIPPING – SIDE CUTTINGAEBCLTotal hardness: 45÷50 HRcHardness and cutting edge: 58÷62 HRcCHROME VANADIUM STEELSERRATED GRIPPING – SIDE CUTTING4REF.613.191L200A17B70C9E2grs.160CT: Ø mm.W M1 1,6Finish1u.10REF.613.291L200A17B70C9E2grs.180CT: Ø mm.W M1 1,6Finish2u.55DIAGONAL CUTTING NIPPERSUNE 16531DIN - ISO 5749UNE 16531DIN - ISO 574967Total hardness: 45÷50 HRcHardness and cutting edge: 60÷63 HRcSPECIAL CUTTING STEELACBLTotal hardness: 45÷50 HRcHardness and cutting edge: 60÷63 HRcSPECIAL CUTTING STEEL8REF.624.081624.091624.101L140160180A202224B202224C10,51212grs.149221267CT: Ø mm.CT: Ø mm.W M H Finish u.REF. L A B C grs. W M H Finish u.22,731,622,51,41,62111101010624.191624.2011601802224202212122252802,7322,51,6222559HIGH LEVERAGE DIAGONAL CUTTING NIPPERS10UNE 16531DIN - ISO 5749UNE 16531DIN - ISO 574911CL12Total hardness: 45÷50 HRcHardness and cutting edge: 60÷63 HRcSPECIAL CUTTING STEELREF.625.541625.551625.561Lmm.160180200A232526B182021C101212grs.181262290ABDTotal hardness: 45÷50 HRcHardness and cutting edge: 60÷63 HRcSPECIAL CUTTING STEELCT: Ø mm.CT: Ø mm.W M H Finish u.REF. L A B C grs. W M H Finish u.2,73422,531,822,511110105625.651625.661180200252620211212260310342,5322,522551431314

AA1END CUTTING NIPPERS2UNE 16530DIN - ISO 57483ATotal hardness: 45÷50 HRcHardness and cutting edge: 60÷63 HRcSPECIAL CUTTING STEELREF.LABCgrs.CT: Ø mm.W HFinishu.CBL626.161626.18116018027327824272153501,51,51,622255456CUTTING PLIERFOR PLASTIC90 0 CUTTINGPLIER FOR PLASTIC78A9Total hardness: 45÷50 HRcHardness and cutting edge : 55÷62 HRcCBLTotal hardness: 45÷50 HRcHardness and cutting edge : 55÷62 HRcCBLREF.LABCgrs.CT: Ø mm.PlasticFinishu.REF.LABCgrs.CT: Ø mm.PlasticFinishu.10623.011 160 19 21 11 150623.011-1 Spare spring8151623.031 145 15 12 22 133623.011-1 Spare spring6151111245 0 CUTTINGPLIER FOR PLASTIC13Total hardness: 45÷50 HRcHardness and cutting edge : 55÷62 HRcREF.LABCgrs.CT: Ø mm.PlasticBCFinishLu.14623.021 155 15 24 17 130623.011-1 Spare spring5151144

WIRE STRIPPERS1máx. 5 mm.2máx. 10 mm 2 .Total hardness: 45÷50 HRcSPECIAL CUTTING STEEL3CABLREF.629.161L160A15B46C8grs.170Stripping capacityØ mm Sec. mm 2max. max.510Finish2u.54DISPENSER567REF.N.º Pcs.CompositionREF.N.º Pcs.Composition8910.89130555555602.471601.471601.481624.191625.651625.661910.88130555555602.421601.421601.431624.091625.551625.5619REF.910.181N.º Pcs.EmptyREF.910.181N.º Pcs.Empty10SETS IN DOUBLE BLISTER1112REF.601.701601.801A33Composition602.421625.551612.191602.471625.651612.291grs.690730u.111314145

1CIRCLIP PLIERSThe IRIMO cylindrical tips allow circlips to grip firmly to the tips, avoiding tension risks.23The circlip is held firmly thanks to thedesign of the tipMakes your work easier, quicker andsafer. Maximum performance withminimum effort.Patented tip:- Maximum resistance withoutdeformation of circlip- Patent number P200402604- Long life of the plier45Exceed the standard of capacityof tips, without deformationHigh precision joint:- Easy handling- Wear resistant spring protected inside the joint- It doesn´t hinder work. Can´t get dirty or lost. It makes workmore comfortable.- The plier will keep in perfect working conditions for years.Maximum opening of the circlip:- The handle design allows a greater openign of the tipsThin and streamlined head and tips:- Great accessibility to difficult places or pieces.67UNE 16593DIN 5256INTERNAL CIRCLIP PLIERSUNE 16593DIN 5256B8Total hardness: 45÷50 HRcCHROME VANADIUM STEELEBLTotal hardness: 45÷50 HRcCHROME VANADIUM STEELELREF.LBEgrs.CapacitymmFinishu.REF.LBEgrs.CapacitymmFinishu.9621.551621.561621.571621.581621.59114014018022531038385769950,81,21,72,23,180801702754908 a 1312 a 2519 a 6040 a 10085 a 1401111155551621.651621.661621.671621.681621.69112712716520828925254352740,81,21,72,23,180801702754908 a 1312 a 2519 a 6040 a 10085 a 140111115555110UNE 16592DIN 5254EXTERNAL CIRCLIPL PLIERSUNE 16592DIN 5254B11EBLEL12Total hardness: 45÷50 HRcCHROME VANADIUM STEELTotal hardness: 45÷50 HRcCHROME VANADIUM STEEL1314REF.621.751621.761621.771621.781621.791L140140180225295B3838576995E0,81,21,72,23,1grs.8080170275490Capacitymm3 a 1010 a 2519 a 6040 a 10085 a 165Finish11111u.55551REF.621.851621.861621.871621.881621.891L127127165208289B2525435274E0,81,21,72,23,1grs.8080170275490Capacitymm3 a 1010 a 2519 a 6040 a 10085 a 165Finish11111u.55551146

CIRCLIP PLIER SETSET IN MODULARTRAY123REF.601.911mm.Straight interior 19-60Curved interior 19-60Straight exterior 19-60Curved exterior 19-60L182168173163grs.750SEE RANGEIN CHAPTER 145SPECIAL RETAININGRING PLIER6DATotal hardness: 45÷50 HRcBENT NOSEBL7REF.LABDgrs.Finishu.622.07120030552,4200118CEMENT LAYERPINCERS9CARPENTERS’PINCERSUNE 16535ISO 9243UNE 16536ISO 924210Total hardness: 45÷50 HRcHardness at the cutting edge: 60÷63 HRcREF.631.061631.071631.081631.091631.101L160180200225250A4450535660B2022242628C1922242626grs.195305370470550CT: Ø mm.M1,61,61,61,61,6ACBFinishAAAAALu.55555Special cutting steel.To twist and cut wire in one operation.Very precise cutting. Each cut requires a minimum effort.Long-lasting edges. Optimum working condition along its life.Handy and light. Perfect for a continuous utilization.Total hardness: 45÷50 HRcHardness at the cutting edge: 60÷63 HRcREF.632.091632.101632.111L225250280A293337B171819C222324grs.340360450ACBCT: Ø mm.W M1,251,251,251,61,61,6FinishAAALu.55511121314147

1SLIP JOINT WATERPUMP PLIER2UNE 16537DIN - ISO 8976UNE 16537DIN - ISO 89763ABLABLCC4Total hardness: 45÷50 HRcREF. L ABCgrs.FinishSLIP JOINTu.Total hardness: 45÷50 HRcScrew hardness: 28÷40 HRcREF.LABMACHINED GROOVE JOINTCgrs.Finishu.5634.0212404031934515634.201634.211634.221634.2311902503004003039541052532425581112131953457051.130111155216UNE 16537DIN - ISO 8976UNE 16537DIN - ISO 897678Total hardness: 45÷50 HRcScrew hardness: 28÷40 HRcABLCGROOVE JOINTTotal hardness: 45÷50 HRcScrew hardness: 28÷40 HRcGROOVE JOINTREF.LABCgrs.Finishu.REF.LABCgrs.Finishu.9634.10125032351138515634.1112503235114212510UNE 16537DIN - ISO 8976B11CAL121314Total hardness: 45÷48 HRcHardness of teeth: 58÷60 HRcREF.634.311L250A47B39C9QUICK ADJUSTINGgrs.285Finishs2u.5Direct grip on any piece9 positionsMaximun opening:- Round pieces of 71 mm. of diameter- Flat pieces of 69 mm.One hand operated adjusting button. Avoids unintentional changes inopening.Heat treated teeth (58 HRC) for a longer life.Sturdy legsStreamline profile for better accessibility148

SELF GRIP PLIERS14 positions* Long jawsS23BCBREF.641.601*641.611L235255S50100ADJUSTABLE GRIP PLIERB6072C1717Cgrs.500650u.11LREF.641.051641.061L190235STRAIGHT AND CONVEX JAWSS3043B2125Cgrs.9 370 513 600 5To hold and work with different shapesu.L45SS6CBLCBL7REF.641.001641.011641.021641.291L135190235300ROUND JAWS, WITH CUTTERS30426375B23334052C6,591012grs.180370600890Multifunctional, with cutter for multiple jobsu.5555REF.641.301641.311641.321641.331L155190235300CURVED JAWSS30426375B23334052C6,591012grs.180370600890u.5555Multipurpose grip for workshops, garages and general maintenance98S10B11CLREF.SSELF GRIP PLIERS GRIP HOLDERSuitable forgrs. u.REF.LSBCGRIP OMNIUMgrs.u.12641.5010 - 50All self grip pliers 235 and 3001951641.531641.5412353006363555512,512,56308801113Universal tool, suitable to hold round, flat and large objects14149

1SELF GRIP PLIERS2S3BBCLSCL4REF.LSBCLARGE CAPACITYgrs. u.REF.LSBCHOSE CLAMPgrs.u.5641.0713001002217810 5Ideal for the removal of oil filters641.27123530 80 6 380 5Specially designed to pinch tubes and hoses without damaging them(i.e. brake repairs)SS67BCLSTRAIGHT JAWSBCLPARALLEL JAWSREF.LSBCgrs.u.REF.LSBCgrs.u.8641.081641.031641.041641.10113519023530030426375233340529.51316201903906309105555Strong tool for use in garages and workshops641.091235452614600 5For a firm grip on flat pieces9S10BSBE11- “C” shape to house square parts- Appropriate for workshop and garage useALUMINIUM “C” CLAMPSCLD CSTEEL “U” CLAMPL12REF.641.221641.231L300360S90180- Aluminium jaws avoid welding pellets getting stuck to the tool- Lightweight, appropriate for intensive workB65120C1220grs.670870u.11REF.641.171641.181L200300S6090B6787C3030grs.690960u.1113REF.LSBSTEEL “C” CLAMPSCgrs.u.14641.341641.241641.5211653004606010010350942604,512122408901.300111150

SELF GRIP PLIERS12BBS3SCLLCREF.LSBCgrs.LONG NOSEu.REF.STEEL “C” CLAMP, LARGE & LONG REACHL S B C grs. u.4641.131641.141165235557060804,5619040055Suitable to reach difficult areas (i.e. engines)641.251REF.641.821500L500270S270285B28540C401.700grs.9501u.156SBS7BCLSELF ADJUSTING PARALLEL JAWSSTEEL “C” CLAMP, SWIVEL PADSCL8REF.LSBCgrs.u.REF.LSBCgrs.u.641.421641.431235300451002882141464079051For a firm grip on flat pieces, even when sloped641.461641.4711653005080469018,23227097011Knurled swivel pads allow a more solid grip910SC11CCHAIN CLAMPLSB12REF.641.111641.211L250300S160160C2525grs.9001.140u.11Holds easy and quickly irregular shapes, oil filters, mufflers, etc.REF.LSBCSHEET METAL GRIPgrs. u.L13REF.641.4512004550805205641.901 RepWide jaws to hold and work with thin sheets in body shop and metal work14151

1SELF GRIP PLIERS2CS3B4PIPE “U” CLAMPSLCCHAIN PIPE CUTTERLREF.LSBCCap.grs.u.REF.LSCgrs.u.5641.191300709370909351641.121641.281250300757528288001.020- To cut stainless steel, PVC and copper tubes (max. 2,6 mm.)- Perfect for exhaust pipes- The cutting job can be done with a turning angle of just 90°116REF.641.511RepGRIP DISPLAY7891011• 13 pc grip plier display• Tools are hung from theadjusting screws• Front holes for 165-190 mm.grips• Side holes for 235-300 mm. grips12REF.910.431CompositionEmpty1314152

AXIAL GRIPS1• Powerful clamping pressure 0,4 tons• Small size for getting into narrow spaces• Straight motion of movable jaw• Push-button easy release• Ergonomic tool, rounded shapes• Body of anodized finishing aluminium alloy.• Permits correction of earth cables when welding.• Very light.• Once handed action.• Resistant rust and corrosion.• Spatter resistant.• Allows the exection of up to half a ton force without deformation.23MICROGRIP4Suitable for flat workpiecesREF.641.571L91Cap.0 - 12grs.120u.15AXIAL GRIP LREF.641.351Desig.LOpening0 - 18Depth–L190grs.410u.1678Suitable for spot weldingAXIAL GRIP W9REF.Desig.OpeningDepthLgrs.u.641.371W0 - 153619547511011121314153

1WELDING SELF GRIP PLIERS23BSLDOUBLE SPINDLEDOUBLE SPINDLE4REF.645.011Desig.N. 1S x B32 x 30L193grs.690u.5REF.645.021Desig.N. 2S x B70 x 30L196grs.765u.556LBS7REF.645.031Desig.N. 3S x B70 x 62L240DOUBLE SPINDLEgrs. u.935 5REF.645.041Desig.N. 4S x B150 x 62L240DOUBLE SPINDLEgrs. u.1.180 58SPARE PARTS9REF.645.511645.521645.541N. 1N.2/3N. 4u.1111011121314154

BOLTCUTTERSHigh resistance hardwareDouble blade heat treatment- Body blade heat treatment.- Local induction hardened cut.Blades individually testedEach boltcutter is factory testedwith hard rod. See the fooprint!1SecuritystopsHigh qualitypaintingLacquered bycataphoresisGreat cuttingcapacityManufacturingbatch informationTraceabilityForce multiplyingmechanismLevering system.Forgedcomponents234UNE 16584 UNE 16584Central cutVersatility to cut hard orsoft materials5ABLABL6REF.LABgrs.u.REF.651.101L320-0A48B77grs.500u.1651.111651.121651.131651.141470-1630-2750-3900-466851001201041371601821.7852.8604.4105.80011117MAXIMUM CUTTING CAPACITY80 kg/mm 2120 kg/mm 2160 kg/mm 28320-0470-1630-2750-3900-4ØØØØØ5791113468910357899SPARE HEADSDISPENSER10REF.LABgrs.u.REF.Nº Pcs.Contentskg.651.201N651.211N651.221N651.231N651.241N320-0470-1630-2750-3900-4486685100120771041371601821803708751.2951.93011111910.061910.75117Empty dispenser, 500 x 300 x 175Dispenser with tools2 bolt cutters 470-1 cod. 651.1112 bolt cutters 630-2 cod. 651.1212 bolt cutters 750-3 cod. 651.1311 bolt cutter 900-4 cod. 651.1413,527,511MINI BOLT CUTTER,SIDE CUTTING12LTo cut rivets, screws, bits, nails, etc.Use on steel of 130 kg./mm2 maximumOpening and locking mechanism.REF.LABgrs.CT=Ø130 kg/m 2u.13A650.10121540152801,51B14155

1COPPER-ALUMINIUMCABLE CUTTERSCOPPER-ALUMINIUMELECTRIC CABLE CUTTER2OPENING AND LOCKING MECHANISM345Total hardness: 55÷59 HRcREF.655.091655.101655.091-1655.101-1L170230A2938B1621C1012spare spring 655.091spare spring 655.101Mu = Multi strand / Mo = Monoblock / A = AlmelecACBCHROME, PVC FINISHgrs.220460CT: Ø mm.Mu Mo A1420815510LFinish11u.2211CT: Ø mm.REF.Lgrs. Mu Mo A655.701 170 220 10 8 6Mu = Multi strand / Mo = Monoblock / A = AlmelecA66ELECTRICIANS’ KNIVES AND SCISSORS7ALAL8REF.664.081L200A85WOODEN HANDLEgrs.u.8310REF.661.051L130A47,5grs.70u.109AL10REF.LAPLASTIC HANDLEgrs.u.REF.Lu.664.181200856010661.061152111QUICK CHANGE CUTTER1213• Blade safety system.• Quick blade changing system.• 6 blade stock.• Delivered with 6 blades.• Ergonomic rubber handle.• Injected metal body.• For high accuracy knives of 0,6 mm.• Allow blades of, straight, curved, of mark, etc... cutting.REF.Z150003L170grs.250u.114Z150008ZSet of 12 spare blades156

TIN SNIPS1234 Chrome-Molybdenum Alloy steel forgedblades for greater strength. Precision ground edges. Superior cuttingquality and positive hold on work. Induction hardened cutting edges: longerdurability of the blades. Center Fastener: High tensile strengthand adjustable. Double Overwing Spring for longer life. Compound leverage gives more cuttingaction. Ergonomic handles with non-slip material. Hand hole. Safety auto catch one hand release.567Most practical and economical rangePerfect for both professional and DIY users8658.421 658.411 658.4019Hardness at the cutting edge: 60÷62 HRcACTION SNIPSREF.658.421658.411658.401CutStraightRightLeftL - Total250250250L - Cut353535Copper1,501,501,50Coll rolled steel1,201,201,20Cutting capacityHard wireHRc 301,001,001,00HRc 400,600,600,60Stainless steel 3040,700,700,70101175 mm cutting lengthMultiuse12REF.CutL - TotalL - CutHardness at the cutting edge: 60÷62 HRcCopperColl rolled steel658.431Cutting capacityHard wireHRc 30ACTON SNIP LONG CUTHRc 40Stainless steel 30413658.431Straight290751,100,940,700,700,5314157

12Cutting capacity superiorFor tough tasksTIN SNIPS658.321 658.311Hardness at the cutting edge: 60÷62 HRc3REF.CutL - TotalL - CutCopperColl rolled steelCutting capacityHard wireHRc 30COMPOUND TIN SNIPSHRc 40Stainless steel 3044658.321658.311RightLeft260260Special for very long and lose cutsKeeps the handles away from the work piece35351,801,801,501,501,001,001,001,000,900,9056REF.CutL - TotalL - Cut658.361CopperHardness at the cutting edge: 60÷62 HRcColl rolled steelCutting capacityHard wireHRc 30 HRc 40658.351OFFSET TIN SNIPSStainless steel 3047658.361658.351RightLeft26026032321,801,801,501,501,001,000,600,601,001,008RIGHTCUTTYPES OF SNIPSLEFTCUTSTRAIGHTCUTSPARESETS OF SPRING, AXIS AND NUTREF.Foru.658.421-1658.321-1658.421-411-401-431658.321-311-361-35111910TIN SNIPSTIN SNIPS1112LL13Hardness at the cutting edge: 53÷57 HRcREF.LCutAgrs.Au.Hardness at the cutting edge: 53÷57 HRcREF.LCutAgrs.Au.14658.101658.111250250RightLeft424249548511658.201658.251658.301200250300RightRightRight384450350525730666158

1234567810 PULLINGTOOLS9Ref. 701.011page 16010Ref. 705.201page 161Ref. 709.101page 164Ref. 718.211page 16711Ref. 705.221page 161Ref. 710.021page 165Ref. 720.011page 16712Ref. 707.211page 162Ref. 713.001page 163Ref. 711.031page 165Ref. 715.211page 166Ref. 730.011page 167Ref. 740.011page 1671314

1PULLERS23SAFETY INSTRUCTIONS FOR USE OF PULLERSUsing a good quality puller, the task will be safely done. However, it is necessary to follow theseadditional instructions:• Use the most suitable puller for each application• Do not sharpen or modify a puller.• Keep puller shafts clean, greased and threads undamagedUNIVERSAL PULLERS• When pulling, the shaft must turn only leaning on the edge, this is, on the ball or pin. Thefriction of any other part, specially with big tensions, can cause damage to the puller.• Do not strike the puller with hammers or simmilar tools.4UNE 1659756LB7STANDARDABLEGS89REF.701.011701.021701.031701.041701.051701.061701.071Desig.N. 1N. 11N. 2N. 21N. 3N. 31N. 32A80120160200250350520B100100150150200200200L135135205205270270310Pot.Tn4488131314• Body and legs manufactured in forged steel.• Beam shape section, light and strong.• Chrome-vanadium claws forged completely, maximum accuracy.• Sharp leg hooks, greater accesibility to narrow places.grs.1.0401.1403.0003.2757.4008.20013.600u.1111111Para701.011701.021701.031701.041701.051701.061701.071Desig.N. 1N. 11N. 2N. 21N. 3N. 31N. 32Included legREF. Bleg mm701.211701.221701.231701.231701.251701.251701.251100100150150200200200Long optionREF. Bleg mm721.211721.221701.241701.241701.261701.261701.261200200300300380380380Extra long optionREF. Bleg mm––––701.271701.271701.271––––500500500101112UNIVERSAL PULLER DISPENSERREF.Nº. Pcs.Contentskg.1314910.051910.82116Empty exhibitor 440 x 300 x 630Exhibitor with tools111111Nº 1Nº 11Nº 2Nº 21Nº 3Nº 3180 x 100120 x 100160 x 150200 x 150250 x 200350 x 200REF.701.011REF.701.021REF.701.031REF.701.041REF.701.051REF.701.061527160

MECHANICAL PULLERS1FOR PULLING SMALL PIECESUNE 1658023BBTWO LEGSATHREE LEGSA4REF.ABgrs.Pot.Tnu.REF.ABgrs.Pot.Tnu.705.201705.211556545651401650,50,511705.301705.311556545651702100,750,75115MECHANICAL PULLERSHEAVY DUTY6BB7AATWO LEGSTHREE LEGS8REF.ABgrs.Pot.Tnu.REF.ABgrs.Pot.Tnu.705.221705.231705.241705.2518012016018080120160200** Legs with two adjusting positions4007001.9003.70012581111705.321705.331705.341705.3518012016022580120160200** Legs with two adjusting positions5001.0002.6005.1001,537,51211119MECHANICAL PULLERSLEG HOOKS CLAMP AUTOMATICALLY UNDER TENSION10UNE 1658011BA12THREE LEGS, CONVERTIBLE IN PULLER OF TWO CLAWS13REF.ABgrs.Pot.Tnu.706.33130030012.00012114161

1MECHANICAL PULLERSUNE 165802REF.ABgrs.Pot.TnTHREE LEGSu.3BA706.301706.311706.651706.321706.611706.621706.631100150150220300350500100150200*220270*400*500*6501.1001.3002.9006.1007.1008.2001,533,57,512121211111114* Legs with three adjusting positions5MECHANICAL PULLERS6UNE 165807BBAA8TWO LEGSTHREE LEGS9REF.707.211707.221707.231A90120305B80130220grs.1.0002.0804.400Pot.Tn2510u.111REF.707.311707.321707.331A90120305B80130220grs.1.5003.0606.500Pot.Tn37,510u.111* Can also be used as two legs.1011TENSIONING-YOKE PULLERS1213BFor removing flush-seated parts, such as axle bearings, ball bearings, pinions, etc. Theextra-sharp hooks work as a separator when the yoke is actioned. Great clamping reachREVERSIBLE14AREF.707.611A110B175grs.2.100Pot.Tn5u.1162

MULTIPLE PULLERn-1 n-2 n-3 n-41B2BAREF.BSPARE CLAWFor puller3Economical tool. Two or more legs can be attached in line,obtaining greater reachREF.713.001713.011Amin. - max.20 - 17375 - 250Bmin. - max.65 - 14077 - 182grs.2.7006.000Pot.Tn510u.11796.511796.521796.531796.541796.551REF.713.511713.521713.531713.541796.571n-1n-2n-3n-4n-1n-2n-3n-4140 THIN14010065SPRINGB182 THIN18212277SPRING713.001713.001713.001713.001713.001For puller713.011713.011713.011713.011713.011456MULTIPLE PULLER SPINDLESPARE BODYREF.796.491713.611For puller713.001713.011u.11REF.796.501796.561For713.001713.0117891011121314163

1234BEARING SEPARATORSPULLER FOR SEPARATORADirections of use: for a correct extraction place perfectly the edge of the separator in thegroove of the external ring of the bearing, and turn alternately both shafts until the wholemachined edge is hidden behing the bearing.ONLY AT THAT POINT THE EXTRACTIONSHOULD BE CONTINUED, USING THE CORRECT PULLER.REF.709.101709.111709.121709.131709.141709.151Amin. max.5 6012 7522 11530 15530 20030 250Forpuller709.201709.211709.221709.231709.241709.251grs.4501.0002.3004.4008.90016.300u.1111115B6APULLEREXTENSION SETS78REF.709.201709.211709.221709.231709.241709.251Amin. max.40 12060 16570 21590 300125 380140 440B160230250270350400Forseparator709.101709.111709.121709.131709.141709.151Ringconnection10 x 1,510 x 1,514 x 1,518 x 1,522 x 1,524 x 1,5grs.1.0002.4503.8007.20011.30018.000u.111111REF.709.321709.331709.341709.351709.361L100100100200200Forpuller709.201/709.211709.221709.231709.241709.251grs.2505006502.1002.700u.11111SETS9REF.709.421709.431709.441Separator709.101 (05-060)709.111 (12-075)709.121 (22-115)Contentspuller709.201 (160)709.211 (230)709.221 (250)Extension709.321 (100)709.321 (100)709.331 (100)grs.2.8004.1009.10010BEARING EXTRACTORS, WITH HOOKS1112HOOK SETSHUB SPINDLE SETSREF.Lgrs.u.REF.LFor hooksgrs.u.1314710.111710.121710.131710.141710.151710.161710.171710.181*140145185175185190230-1230-2Each set is made up of 4 identical hooks* Includes supporting rings8010020020030040060080011111111710.221710.231710.241710.251710.261175210225265270710.111/121710.131/141/151710.151/161710.171/181710.1811502804207501.10011111164

BEARING EXTRACTOR SETS, WITH HOOKS1REF.710.021REF.710.031CapacityShadedareaCapacityCompletechartContents3 Hub-spindle sets, 710.221 a 710.2416 Hook sets, 710.111 a 710.1611 Bar handleContents5 Hub-spindle sets, 710.221 a 710.2618 Hook sets, 710.111 a 710.1811 Bar handle4 Supporting ringsINSTRUCTIONS• Choose the suitable hook set for the bearing according to the chart (right)• Place the four hooks approximately at 90°• Place the hub, placing the shaft in the axle• Turn the shaft carefully, and extract the bearinggrs.4.700grs.8.0006000600160026003600460056007600860096010HUB AND HOOK ELECTION CHARTFOR BALL BEARING REF. HOOK REF. HUB6200620162026006 6203601160126204620562066207620862096210621162126300630163026303630463056306630764036308* 640464056309* 6406*6310*6311** Need to use the rings providedBALL BEARING INTERNAL EXTRACTORS710.111710.121710.131710.141710.151710.161710.171710.181710.221710.231710.241710.251710.2612345678SETSSUPPORT PULLER9REF.711.031711.041711.051Capacity12 - 3012 - 4512 - 70ExtractingheadContents4 (711.131 to 711.161)6 (711.131 to 711.181)8 (711.131 to 711.201)Supportpuller1 (711.311)2 (711.311 to 711.321)2 (711.311 to 711.321)grs.2.4005.90010.000REF.711.311711.321Capacity8 - 3636 - 70grs.6001.400u.1110R11EXTRACTING HEADREF.711.111711.121711.131711.141711.151711.161711.171711.181711.191711.201711.211Capacity5 - 88 - 1212 - 1414 - 1919 - 2424 - 3030 - 3636 - 4646 - 5656 - 7070 - 100Ring10 x 1,510 x 1,510 x 1,510 x 1,510 x 1,510 x 1,510 x 1,514 x 1,514 x 1,514 x 1,514 x 1,5Supportbridge711.311711.321711.331For use withImpactpuller711.411711.421grs.1501601701702003003506508001.4002.900u.11111111111REF.711.411711.421Capacity5 - 1414 - 56grs.3503.500IMPACT PULLERINSTRUCTIONSChoose the extracting head according to the internal diameter of the piece to be extracted.Place the head, and operate the head shaft: the tapered edge grips securely the piece to beextracted.Finish the task using the support puller or the impact puller.u.11121314165

1AUTOMOTIVE PULLERS234SEE AUTOMOTIVE PULLERSIN CHAPTER 1356STUD SETTER & EXTRACTOR78ECCENTRIC TYPEREF.Ø mm.grs.u.9715.211715.2214 - 138 - 19410435111011121314REF.717.901Contents4 piece setØ 6 - 8 - 10 - 12SET, ROLLER TYPEgrs.u.9501REF.716.211716.221716.231Contents5 pcs. 1 - 2 - 3 - 4 y 56 pcs. 1 - 2 - 3 - 4 - 5 y 68 pcs. 1 - 2 - 3 - 4 - 5 - 6 - 7 y 8grs.110215690u.111SET166

TAP WRENCHES12ADJUSTABLERATCHET TYPE3REF.ContentsLgrs.u.REF.mm.Lgrs.718.011718.031718.0512 - 64 - 95,5 - 161802805001202801.100111718.211718.231718.21R718.23R2,6 - 5,54,6 - 885110Repair kit of jaw“ “ “ “1803004MAGNETIC PICK-UP TOOL5ALREF. Power A L grs. u.720.011 1.000 gr. 10 550 130 1720.041 3.000 gr. 13 550 280 16SHEET METAL PUNCHES7REF.Cut sizeØ mm.Screwgrs.u.ROUND8740.021740.041740.051740.061740.081740.091740.101740.1211620222530354050M 8M 10M 10M 10M 12M 12M 14M 14801201601803205006601.040111111119NUT SPLITTERS1011A12LSCREWREF.730.011730.131796.641796.651795.741795.751Desig.N. 1N. 2A3240LFornuts126 6 - 27 mm.170 6 - 36 mm.Spare spindle nº 1Spare spindle nº 1Spare spindle nº 2Spare spindle nº 2grs.180300u.11REF.740.251740.261740.271740.281740.291Ø mm.M8M10M12M14M201314167

SPARE PARTS168BODY——————————————————795.381—795.441795.471795.361795.361795.511795.521795.531795.541795.381—795.441795.571795.571795.241795.511795.521795.531795.571795.571796.131795.471795.471795.471795.241—795.541795.541795.541796.131795.521—795.441796.461795.521795.531796.481——795.681795.651795.681795.681——————796.011796.031796.051—796.091796.111————————————————701.211701.221701.211701.221701.231701.241—701.231701.241—701.251701.261—701.251701.261—701.251701.261701.271—701.251701.251701.261701.271795.321795.291795.271795.331795.341795.351795.321795.291795.271795.331795.341795.351795.371795.391795.431795.561795.581795.231795.371795.391795.431795.561795.581795.231795.461795.491795.501796.431795.421795.461795.491795.501796.431795.421795.251795.261796.451795.251795.261796.451—795.641795.671795.701795.711795.721796.261796.141——796.201——796.021796.041796.061796.081796.101796.121——————————————795.961—BRIDLE————————————————795.311795.311795.281795.411795.451795.481795.311795.311795.281795.411795.451795.481795.281795.411795.451795.591795.591795.731795.281795.411795.451795.591795.591795.731795.481795.481795.481795.731795.411795.481795.481795.481795.731795.411795.411795.451796.471795.411795.451796.471—795.661795.691795.661795.691795.691—————————————————————————————SCREW701.311701.311701.321701.421701.321701.421701.331701.431701.331701.431701.341701.431—701.341——795.021795.061795.111795.151——795.021795.061795.111795.151795.021795.051795.111795.201—795.221795.021795.051795.111795.201—795.221795.151795.151—795.221795.061795.151795.151—795.221795.061795.041795.101796.441795.041795.101796.441795.081795.091795.141795.111——795.171796.151796.171796.191796.211796.231796.251795.041795.101795.131795.181795.191795.201795.861795.861795.871795.881795.881795.891795.891795.901795.901—795.921795.871795.881795.951——796.491713.611796.351701.011L-200701.021L-200701.031L-300Desde 2007701.041L-300Desde 2007701.051L-400Desde 2007701.061L-400Desde 2007701.071L-400L-500Desde 2007701.601701.701L-400L-500705.201705.211705.221705.231705.241705.251705.301705.311705.321705.331705.341705.351706.201706.211706.221706.231706.241706.251706.301706.311706.321706.331706.341706.351706.511706.521706.531706.541706.551706.611706.621706.631706.641706.651707.211707.221707.231707.311707.321707.331707.511707.521707.531707.611707.621707.631708.011709.101709.111709.121709.131709.141709.151709.201709.211709.221709.231709.241709.251711.111711.121711.131711.141711.151711.161711.171711.181711.191711.201711.211711.251711.261711.311711.321711.331713.001713.011714.301DIM.M14x1,5x135M14x1,5x135M20x1,5x231G1/2”x14 tpi x210M20x1,5x231G1/2”x14 tpi x210M28x2x302G3/4”x14 tpi x265M28x2x302G3/4”x14 tpi x265G1”x11 tpi x310G3/4”x14 tpi x265M55x 2G1”x11 tpi x310M10x1,5x60M10x1,5x80M12x1,5x110M14x1,5x155M18x1,5x200G1/2x250M10x1,5x60M10x1,5x80M12x1,5x110M14x1,5x155M18x1,5x200G1/2x250M12x1,5x110M14x1,5x140M18x1,5x200G1x360—1 3/8” UNF12hM12x1,5x110M14x1,5x140M18x1,5x200G1x360—1 3/8”UNF12hG1/2x250G1/2x250G1/2x3501 3/8”UNF12hM14x1,5x155G1/2x250G1/2x250G1/2x3501 3/8”UNF12hM14x1,5x155M14x1,5x125M18x1,5x170M20x1,5x330M14x1,5x125M18x1,5x170M20x1,5x330M18x1,5x130M18x1,5x130G1/2x175M18x1,5x200G1/2x350G1/2x350G3/4x200M10M10M14x1,5M18x1,5M22x1,5M24x1,5M14x1,5x125M18x1,5x170G1/2x210G3/4x280G1x310G1x360M10M10M10M10M10M10M10M14x1,5M14x1,5M14x1,5M14x1,5M10M10M10——9/16” UNC 12 h3/4” UNC 10 h.CLAWPULLER1413121110987654321

1234567811CUTTING TOOLSMEASURINGTOOLS9Ref. 801.101page 170Ref. 803.211page 1711110Ref. 980.331page 17112Ref. 980.451page 17213Ref. 981.081page 17214

1HACKSAW FRAME23456• All-hard blade.• Very precise cutting and long life.• For heavy-duty work and all kind of materials(alloy, stainless steel).• The workpiece must be firmly clamped.• A toothed high-speed steelstrip welded to a backingblade made of spring steel.• Flexible and safe (unbreakable).• High performance.• The blade can withstand veryhigh tension; has stableproperties and produces verystraight, uniform cuts.78HAHALLSTRAIGHT HANDLEPISTOL GRIP HANDLE9REF.801.011Desig.N. 1A100H128L512grs.575u.10REF.801.031Desig.N. 3A100H128L477grs.665u.1010111213• A professional and stable hacksaw frame.• Blade storage inside the rectangular back section.• Can be used as a Compass saw.• Alternative 55 degree blade mounting for flush cutting.• Supplied with a 24 TPI bimetal hacksaw blade.ALUMINIUM INJECTED / TENSIONING SCREWHALREF.Desig.AHLgrs.u.14801.101N. 111101514006655170

SAW BLADES12LABCARBON STEEL, FLEXIBLELABHIGH SPEED STEEL (HSS), SEMI-FLEXIBLE3REF.Points per inchABLgrs.u.REF.Points per inchABLgrs.u.803.011803.021803.0311824320,650,650,65131313300300300171717505050803.120803.121803.1311824320,650,650,6513131330030030017171750505045LAH6BLREF.803.321803.211803.221803.231BIMETAL, FLEXIBLE, (SUPER HSS)Points per inch24182432A0,650,650,650,65B13131313L250300300300grs.14,5171717u.50505050REF.801.145L229ALUMINIUM HOLDER, WITH 24 TPIBIMETAL BLADE, IN CLIPH51grs.140• A useful mini-hacksaw for difficult-to-reach positions.• Easy to handle• Supplied with a 250mm bimetal hacksaw blade, 24 TPI.u.178SPARE SCREWREF.801.145-1grs.10u.19MEASURING TAPES10ALAL1112REF.980.331980.341980.381L3 m.5 m.8 m.A19 mm19 mm25 mmBIMATERIAL CASESTOP SYSTEMDISPLAY BOXgrs.170225390u.121212REF.980.391980.601L3 m.5 m.A16 mm19 mmDOUBLE STOP SYSTEMMATT TAPEDISPLAY BOXgrs.105175u.24121314171

1LONGS TAPES2ALAL34REF.Lgrs.FIBERGLASS TAPEu.REF.STEEL TAPE / BIMATERIAL CASELgrs.u.5980.451980.46110 m.20 m.215300GAUGE SETS11980.561980.57110 m.20 m.2053401167891011REF.981.351PitchMetric 60°0,25 to 6 mm.Nº blades240,25-0,30-0,35-0,40-0,45-0,50-0,60-0,70-0,75-0,800,90-1-1,25-1,50-1,75-2-2,5-3-3,5-4-4,5-5-5,5-6REF.981.311REF.981.411PitchWhitworth 55°4 to 62 TPI4-4,5-5-6-7-8-9-10-11-12-13-14-16-18-1920-22-24-25-26-28-30-32-36-40-48-60-62PitchMetric 60°0,25 to 6 mm.0,25-0,30-0,35-0,40-0,450,50-0,60-0,70-0,75-0,800,90-1-1,25-1,50-1,75-2-25-3-3,5-4-4,5-5-5,5-6SCREW PITCH GAUGE SETSNº blades28PitchWhitworth 55°4 to 62 TPI4-4,5-5-6-7-8-9-10-1112-13-14-16-18-1920-22-24-25-26-2830-32-36-40-48-60-62grs.38grs.43u.10u.10Nº blades grs.52 76u.10REF.981.511REF.981.531REF.981.551Contents1 to 7 mm.1-1,25-1,5-1,75-2-2,252,5-2,75-3-3,5-4-4,5-55,5-6-6,5-7Contents7,5 to 15 mm.7,5-8-8,5-9-9,5-10-10,511-11,5-12-12,5-1313,5-14-14,5-15Contents15,5 to 25 mm.15,5-16-16,5-17-17,518-18,5-19-19,5-20-2122-23-24-25RADIUS GAUGE SETSNº blades grs. u.17 65 5Nº blades grs. u.16 110 5Nº blades grs. u.15 105 5FEELER GAUGE SETSREF.ContentsNº bladesgrs.u.12981.081REF.0,05 to 0,60 mm.0,05-0,10-0,15-0,200,25-0,30-0,35-0,40-0,50Contents9Nº blades27grs.5u.1314Blade length: 80 mm.981.131REF.981.2010,05 to 1 mm.0,05-0,10-0,15-0,20-0,25-0,300,40-0,50-0,60-0,70-0,80-0,90-1Contents0,05 to 1 mm.0,05-0,10-0,15-0,20-0,25-0,30-0,350,40-0,45-0,50-0,55-0,60-0,65-0,700,75-0,80-0,85-0,90-0,95-113Nº blades2052grs.835u.5172

1234567812PNEUMATIC ANDELECTRIC TOOLS9Cód. P817pág. 176Cód. P121MApág. 181Cód. P107Kpág. 1861011Cód. P801Kpág. 178Cód. P601pág. 182Cód. ZM7200pág. 18912Cód. P803Spág. 178Cód. P806Spág. 184Cód. PM0189pág. 18913Cód. P116pág. 180Cód. P804Spág. 185Cód. PEC2020pág. 19114

1NEW PNEUMATIC LINE2New professional range.Using the most modern of materials.High quality tools with unbeatable features, with special emphasis on light weight and low vibration.33/8” IMPACT WRENCHP816COMPOSITE3/8” RATCHETP82041,20561/2” IMPACT WRENCH

6mm MINI DIE GRINDERP822RECIPROCATING SAWP824COMPOSITE123425.0003,700,5155” DISK GRINDERP823COMPOSITE1/2" 13mm DRILLP825COMPOSITE6

13/8” IMPACT WRENCHP7041/2” IMPACT WRENCHP8OO2341506005• P704K• P800K6781/2” IMPACT WRENCHP8011/2” IMPACT WRENCHP803SCOMPOSITESILENT97458131011• P801K• P803SK12REF.P704P800P801P803S3/8"1/2"1/2"1/2"6,36,36,36,31,4"-181,4"-181,4"-181,4"-1810101010127999910855-120100-57068-610135-61015060074581310.0007.5006.8007.0001.2001.3001.0001.14089,0090,0088,0084,005,922,573,753,171601921871920,902,402,601,9513KITS14P704KP800KP801KP803SK444475,1257575758,9,10,11,13,15,16,179,10,11,13,14,17,19,22,24,279,10,11,13,14,17,19,22,24,279,10,11,13,14,17,19,22,24,278,10,11,13178

3/4” IMPACT WRENCH 1" IMPACT WRENCHP8O8P4041.6265Kg.123For an intensive use451" impact wrench for heavyvehicles671" IMPACT WRENCH1" IMPACT WRENCHP802P4058LONG ENVIL6”-150mm.2.5003.796910For trucksMaximum power1112REF.P808P802P404P4053/4"1"1"1”6,36,36,36,33/8"-181/2"-141/2"-141/2"-1413131313110416270235407-1.085950-2.030500-1.100813-1.8981.6262.5001.7003.7964.5003.8005.5004.00097550045050092,0098,0090,0092,003,60

12MINI DIE GRINDERP109DIE GRINDERP1163COMPOSITECOMPOSITE4• P109Kmm.26.000134• P116Kmm.22.00016556SILENTDIE GRINDERP807SDIE GRINDER LOWSPEEDP1177COMPOSITE22.0004.0008• P807SKmm.165 mm.2109ANGLE DIE GRINDERP11520.00010mm.140• P115KCOMPOSITE1112REF.P109P116P807SP117P1151/4"- 6mm1/4"- 6mm1/4"- 6mm1/4"- 6mm1/4"- 6mm6,36,36,36,36,31/4"-181/4"-181/4"-181/4"-181/4"-181010101010853001133205926.00022.00022.0004.00020.00086,0091,0076,0086,0093,003,60

AIR DRILL 10 MMREVERSIBLE AIRDRILL 10 MM1P150MA2.200P805SSILENT2.00023REVERSIBLE AIRDRILL 10 MMREVERSIBLE AIRDRILL 13 MM4P121MAP157MA2.20045056ANGLE AIRDRILL 10 MMSPOTWELDREMOVAL DRILL7P153P2311.900 1.8008Includes two 8mm. drills (P23140)9REF.10P150MAP805SP121MAP157MAP153P2313/8"- 10mm3/8"- 10mm3/8"- 10mm1/2"- 13mm3/8"- 10mm8mm6,36,36,36,36,36,31/4"-181/4"-181/4"-181/4"-181/4"-181/4"-18101010101010-113--113237--------0,250,200,380,210,200,182.2002.0002.2004501.9001.80084,0082,0087,0090,0087,0084,00

1RANDOM ORBITALSANDERP601RANDOM ORBITALSANDERP6102mm.15211.000mm.15211.00035 mm.5mm2,5 mm.2,5mm456FINISHING SANDERP511mm.15211.000DUAL ACTION SANDERP209mm.15211.0005 mm.5mm0-5 mm.0-5mm78910REF.P601P610P511P209mm.1521521521526,36,36,36,31/4"-181/4"-181/4"-181/4"-1810101010255255255142--- -11.00011.00011.00010.00080,0080,0080,0079,00

HEAVY DUTY ANGLESANDERP810HEAVY DUTY ANGLEPOLISHERP809123mm.180mm.1804.5002.5004HIGH SPEED SANDERBELT SANDER5P204mm.10014.000P212With three belts of:- 80 grs.- 100 grs.- 120 grs67mm.10x33016.00089REF.mm.P810P809P204P21217817810010x3306,36,36,36,31/4"-181/4"-181/4"-181/4"-18101010105605601543904.5002.50014.00016.00081,0081,0087,0083,00

12CUT-OFF TOOLP110ANGLE DIE GRINDERP265347520.00012711.0005RECIPROCATING SAWRECIPROCATING SAW6P234P806SSILENT7810.00010.00095-3295-329REF.10P110P265P234P806S75 mm127 mm----95-3295-326,36,36,36,31/4"-181/4"-181/4"-181/4"-181010101012511323017020.00011.00010.00010.000--10.00010.00088,8090,5490,0083,003,9313,366,906,801902502352350,801,700,700,901112ACCESSORIESINT.EXT.13KITSP11030PM408PN20510PN23406PN23407For P110For P110For P2659,529,5223,0--7563115-----95-3295-24x 1,6 mm. Reinforced cutting diskx 10 mm. Reinforced deburring diskx 1,2 mm. Set of 10 cutting disksPM408P1103014PN20510PN23406184

1/4” RATCHETP7003/8” RATCHETP701120-3431/2” RATCHET1/2” RATCHET4P804SSILENTP101567-816-627PNEUMATIC RIVETERPNEUMATICRIVETER KIT8P1256,413.800 NP277K4,88.629 N9Heavy duty riveting power10REF.SPARE JAWSmm.Standard rivetingpower11P12510P125115 - 6 - 6,42,4 - 3,2 -4 - 4,812REF.P700P701P101P804SP125P277K1/4"3/8"1/2"1/2"--6,36,36,36,36,36,31/4"-181/4"-181/4"-181/4"-181/4"-181/4"-18101010101010136136119851131130-270-346-627-81--300250160160--94,0090,4788,0582,5678,0076,003,603,734,242,91

1ROUND SHAFTHAMMER KITHEX SHAFTHAMMER KIT2P107KP108K3453.60010 mm.3.60010 mm.67CHISELSSURFACE CLEANERP127REF.89P108K25P108K50P108K51P108K52P108K53P107K25P107K50P107K51P107K52P107K5317517517517517532620202010P107K09- -3.000111213REF.P107KP108KP127P1271710x175 Round chisels10x175 Hex chisels3x180 mm.6,36,36,31,4"-181,4"-181,4"-1819 units needle set for P217101010115115160(min -1 )3.6003.6003.00094,4795,6697,0056,141,112,61701703151,441,443,0014186

VACUUM AND BLOW GUNP219BLOW GUNP2181234REF.P21915CARTRIDGE APPLICATOR310 ml.DUST BAGCLEANING PISTOLPN01056P21578PNEUMATIC MARKERCARBURE TIPSPARE CARBURE TIP9P799REF.P79912101112REF.P219P218P215PN010P7996,36,32,5-5,26,26,31,4"-18-1,4"-181,4"-181,4"-1810-10101095-801202892,00-N/A-78,000,40-N/A-

1WINDSCREEN REMOVERP2332- Supplied with 1 blade (PBG5725)3REF.P2336,2 1,4"-18 10 260 20.000 80,50

NEUMATIC HOSE REEL123ZM5200ZM6200ZM72004REF.mm.m.ZM6200ZM5200ZM72008x1210x1510x151510204,04,04,05IMPACT WRENCH MAGNETIC HOLDER6130mmThe metallic holder has a couple of very strong magnetsin the back side that allows to maintain even3/4” impact wrench maximum4 impact sockets1 torque toolThe painting is special and avoids damaging thewrenches stored in it78Ø 90mm.353mmREF.9P5000,3801011AIR LINE COUPLERS12REF.inchmm.REF.inchmm.PM0189PM5002PM50031/41/43/8For Hose 9-10MaleMalePM5142PM5143PM5152PM51531/43/81/43/8MaleMaleFemaleFemale13PM5012PM50131/43/8FemaleFemalePM5248-For Hose 814189

1ABRASIVE WHEELSPAIR IN BLISTERLL26mm.ØREF.mm.mm.3mm.ØREF.mm.mm.P420M6725P430M55123P421M5314P431M4813P422M4626P432M44154P423M5325P433M43145P424M5719P434M42136REGULATORS-FILTERS-LUBRICATORSP254-P2557P254P255When compressing atmospheric air, that allways has a humidity rate, liquid wateris generated in the pneumatic circuits. It is necessary to filter this water toprotect the circuit and the air operated tools.89Technical dataAir connectionTankGauge ØRegulation rangeMinimum tem.Maximum temp.Nominal flowFiltering sizeP254-P2551/2100 ml50 mm0,5-10 bar+5º60º3.200 NL/mn20mUse an air filter and regulator(P254) for the spray guns.For pneumatic tools used in repairor body shop, it is necessary an airfilter, regulator and oiler (P255)REF.P254P2551,041,421011IN LINE LUBRICATORPN251Install either in the tool air input, or in the hose 1/4” thread.12REF.PN251inch1/4"0,101314190

DESCRIPCIÓN CORDLESS MACHINES DE PICTOGRAMAS1234567ChuckDrive sizeSpeed/ RPMIPMMax. TorqueGear boxElectric brake switchVoltageBattery AmpBattery chemistryExternal changeable carbon brushNumber of batteriesSquare1/2"2.0001/2" IMPACT WRENCH - 18VPEC20202.600400 Nm1 speedyes18V2,8AhLi- ionyes2PEC2020BAT3/8" 2 SPEED DRILL SET 10.8VPEC2015Automatic chuck withautospindle lock3/8" - 10 mm.L: 0-345 - H: 0-1.240 - 20 Adjustablespeed 20 torque setting + drill mode–27Nm/ 240 in-lbs2 speedesyes10,8V1,1 AhLi- ionyes2PEC2010BAT1/4" IMPACT DRIVER SET - 10.8VPEC2010Autospindle1/4"0-2.2002.700105Nm/ 920 in-lbs1 speedyes10,8V1,1 AhLi- ionyes2PEC2010BAT1/4" MINI DRIVER W/BITS SET - 3.6VPEC2011Autospindle1/4"0-180–4,9Nm1 speedyes3.6V1,1 AhLi- ion–1 incorporated–8910Battery load indicatorSound pressure levelSound power levelVibration levelPlastics case includesBattery chargerAnti-slip bimaterial soft grip handleLED light pointerWeight w/ 1 batteryunit packagesyes97,74dBA107,66dBA9,61m/s21 tool2 batteries1 chargerQuick and intelligent charger.Maxi charging time 30min.PEC2020CHA 220Vyesyes3.1501–72,00dBA83,00dBA1,25m/s21 tool2 batteries1 chargerPH1-PH2-PH3Flat screw 5&62,0-2,5-3,0-4,0-5,0-6,0mm TI-coateddrillsPair of sparebrushesQuick and intelligent charger. Maxicharging time 60min.PEC2010CHA 220Vyesyes1.1451–86,18dBA97,18dBA11,82m/s21 tool2 batteries1 chargerPH1-PH2-PH3Flat screw 5&62,0-2,5-3,0-4,0-5,0-6,0mmTI-coated drills1 Auger bit3/8" Adapter. Pair of spare brushesQuick and intelligent charger.Maxi charging time 60min.PEC2010CHA 220Vyesyes1.1501–75,00dBA88,00dBA0,35m/s41 tool1 charger32 short bits1 long bit holder2 long bits1/4" adapterQuick and intelligent charger.Maxi charging time 60min.PEC2011CHA 220Vyesyes320112111314191

11/4" MINI DRIVER W/BITS SET - 3.6V234Compact Composite Housing• Lighter tool: 320Grs• Anti- slip bi-material soft grip handle• Insulation against low temperatures• Reduces the vibration level• Huge accessibility!1/4” Hex drivechuckForward / reverse switch• The direction can be changed easily withthe thumb finger of the same hand = Moresafety• 1 Full power level3.6V Li-ion technologybattery- 4,9Nm• Full control that avoidsscrew breaks, etc.• Long lasting machinery56Durable metal housing• Avoids high temperatures in one ofthe most critical parts of the machineBig trigger• Accessible and easy toaction triggerQuick & intelligent charger• 60min. for full battery charge• When charging, the light is red.When it is charged, it goes off789101/4" IMPACT DRIVER SET - 10.8VForward/ neutral/ reverse switch• The direction can be changedeasily with a finger of samehand = More safety• In Neutral position the machinealso provides light for spaceinspection = More safetyExternal changeable carbon brushes• Quick and easy system of changingthe brushes=Time saving10.8V Li-ion technology battery/ engine• IPM: 2.700 & 105Nm Max torque: Allowsunfastening really stick screws• RPM: 0-2.200: useful for all kind of applicationsdue to its turning controlCompact composite housing• Lighter tool: 1.150Grs• Anti-slip bi-material soft grip handle• Insulation against low temperatures• Reduces the vibration level• Huge accessibility!111/4” Hex drivequickreleaseQuick & intelligent charger• 60min. for full batterycharge1312Durable metal gear box• Avoids high temperatures inone of the most critical partof the machineLed light integrated• When first trigger touching, thelight switches on providing fullvision in the working areaVariable speed trigger• Full control over the machine as the usercontrols the speedCompact batteryVery slim, it is inserted inthe handle14192

3/8" 2 SPEED DRILL SET 10.8V1Forward/ neutral/ reverse switch• The direction can be changed easily with afinger of the same hand = More safety• In Neutral position the machine also provideslight for space inspection = More safety2 speed gear box• Low: 0-345RPM: ideal formetal works• High: 0-1.240RPM: ideal forwood works220 Torque settings 1drill mode• The desiredtorque can befixed easilyExternal changeable carbon brushes• Quick and easy system of changingthe brushes = Time savingCompact composite housing• Lighter tool: 1.145Grs• Anti-slip bi-material soft grip handle• Insulation against low temperatures• Reduces the vibration level• Huge accessibility343/8” automatic chuck• Time savingVariable speed trigger• Full control over the machine asthe user controls the speedLed light integrated• When first trigger touching, the light switches onproviding full vision in the working areaCompact battery• Very slim, it is inserted in the handle10.8V li-ion technologybattery/ engine• 27Nm Max torque:allows working hardmaterialsQuick & intelligentcharger• 60min. for full batterycharge5671/2" IMPACT WRENCH - 18VForward/ neutral/ reverse switch• The direction can be changed easily with afinger of the same hand = More safety• In Neutral position the machine also provideslight for space inspection = More safetyDurable metal clutch housing• Avoids high temperatures inone of the most critical partof the machine• Long lasting impactmechanism1/2” Square driveLed light integrated• When first trigger touching, thelight switches on providing fullvision in the working areaVariable speed trigger• Full control over themachine as the usercontrols the turningspeedExternal changeable carbon brushes• Quick and easy system of changingthe brushes = Time savingBattery load indicator• No memory effectCompact composite housing• Lighter tool: 3.150Grs• Anti- slip bi- material soft grip handle• Insulation against low temperatures• Reduces the vibration level• Big accessibility and well balanceddue to its vertical battery18V li-ion technologybattery/ engine with 400nmmax torque!• IPM: 2.600: will allowunfastening really stickscrews• RPM:0- 2.000 the widerotating range allows theuser to work in diversapplicationsQuick & intelligent charger• 30min. for full battery charge891011121314193

1PICTOGRAMS DESCRIPTIONS23DRIVESOUNDPRESSUREKwPOWERmm. - wwwBLADESIZE4AIR PRESSUREVIBRATIONLEVELREVERSIBLEmm.RIVET5AIR INLETLENGHTDISCDIAMETERinch mm. mm. mm.CHISEL6DIAMETER WEIGHT VELCROinch-mm. velcro® mm.LONGSOCKET7l/minAIRCOMSUMPTIONPRICESVSELFVACUUMmm.STANDARTSOCKET8Nm.TORQUERANGESOUNDPOWERROTATINGEXHAUSTmm.EXTENSION9MAXIMUMTORQUEMINI HOSEBORE DIAMETEREXCENTRICNm. mm.5 mm. mm.HEXOFFSET KEY10FREESPEED CHUCK 2,5 mm. EXCENTRIC OIL11(min -1 )BLOWSmm.PER MINUTE KEY DIMENSION OILER121314194

1234567813 AUTOMOTIVETOOLS ANDEQUIPMENT91011121314

13AUTOMOTIVE TOOLS ANDEQUIPMENT1.HYDRAULICEQUIPMENTPresses 197Lifting 198Jacks 1992. AUTOMOTIVE TOOLSFAST SERVICE Spark plug tools 202Diesel plug tools 204Oil filter tools 204Oil plug tools 208Battery tools 211Car booster 12/24V 211Exhaust tools 215Garage accessories 216Lubrication 218Workshop equipment 219UNDER CAR TOOLS Wheel tools 221Brake tools 226Suspension tools 229Drive line tools 234ELECTRICAL Electric tools 237ENGINE Diagnostic 240Injection circuit and pump 243Engine setting/locking and, timing tools,diesel injection pump timing 246Valve and camshaft tools 250Cylinder head tools 252Piston tools 253Cooling system tools 254Clutch tools 257Accessories for air conditioning 258BODY SHOP TOOLS Sheet tools-welding 262Metal sheet puller 269196

HYDRAULIC EQUIPMENT13PRESSESHYDRAULIC PRESS WITH15-50T CAPACITYIn accordance with Directive98/37/CE2 speeds manual pump for overload situationsAutomatic return of ramChrome barGaugeMechanic adjustment of bech for PRP30 and PRP50 pressesREF.PRP15MPRE20MPRP30MPRP50MCapacidad15T20T30T50TAmm.1930203020602280Bmm.730800900985Cmm.650650680750Dmm.550620700785Emm.170170200210F-mm.856511570F+mm.950103010201050Gmm.160160145145Hmm.92094010201220kg150180230370PRP15M20T PRESS WITH LATERALSLIDING RAM2 speeds manual pump for overload situationsGaugeOperation of the bomb with hand or footChrome barLateral sliding ramAFG50DEBHCREF.Amm.Bmm.Cmm.Dmm.Emm.Fmm.Gmm.Hmm.kgPRE20CPRE20C 1760 87060068517095050106021010T WORKBENCH PRESSEXTRACTION DEVICES(OPTIONAL)BGCDFJEIAREF.Amm.Bmm.PRP10 540 900Cmm.420mm. Emm.390Fmm.300Lateral sliding ramHand operated hydraulic pumpwith quick connectionControl gaugeGmm.140kg70REF.ZR10010PRP1510MPRP2010MPRP3010MPRP5010MAdaptable to 10T pressAdaptable to 15T pressAdaptable to 20T pressAdaptable to 30T pressAdaptable to 50T press197

I13LIFTINGIn accordance with Directive98/37/CECRANESGF43 2 1HLAMNDECBGE1000"Dead man" safety mechanismOverload valveSwivel safety hook4 position armE140MFolding craneCapacity 500KgE141MFolding craneCapacity 1000KgE144MFolding craneCapacity 2000KgGE1000Folding craneCapacity 1000kgPumpingsystemREF.1Cap. Kg.Positions234Arm length mmFGMElevation heightmmNLIABDimensionsmmCEHDkgmanualmanualmanualmanualGE1000E140ME141ME144M100050010002000750400800160050025050012002501503007001100130016001950870110013001470182021502450295019502400265033105307005007702505005005001550160017201990152013001500190510009001020110085075090097016515018021044060070011009075100310SPARE PARTS FORCRANE GE1000REF.GE100001GE100026GE100032GE1000RPGE1000RFSpare part cylindricalSpare part hookSpare part rolls pilotSpare pivoting wheelSpare part rolls frontgrs.11.0003002001.000600CONVEY VEHICLESUPPORT HANDLESupplied with hook and chainREF.CHCREF.LMT102198

EXTRA LONG JACK 1,5 TEXTRA COMPACT JACK 3T1312CH1500ZExtra long frame 860 mm.Foam protection on armSaddle rubber protectionQuick approach with twoplungersSynthetic wheelsOverload valveCH3000ZFoam protection on armSaddle rubber protectionQuick approach with twoplungersSynthetic wheelsOverload valveEXTRA LOW JACK 2TEXTRA LONG JACK 4,5 TCH2000ZMinimum height: 68 mm.Foam protection on armQuick approach with twoplungersSaddle rubber protectionSynthetic wheelsOverload valveCH4500ZMinimum height: 158 mm.3 position leverSteel wheelsLONG JACK 8TALUMINIUM JACK 2TCH8000ZMinimum height: 169 mm.3 position leverSteel wheelsQuick approach with pedalCHA2000ZLight, only 24 Kgs. !Foam protection on armSaddle rubber protectionSynthetic wheelsSemi-aluminium jack, with some partsin steel in order to be more robustRUBBER PROTECTIONCH2000Z43• For:CH1500ZCH2000ZCH3000ZREF.CapacitykgPedalQuickapproachØ SaddlemmFramedimensions mmArmlenght mmkgCH1500ZCH2000ZCHA2000ZCH3000ZCH4500ZCH8000ZCH2000Z43150020002000300045008000–NOYESNONOYESYES–746898102158169–595498472495584597–YESYESYESYESYESYES–120120110120165165–86069566071014651580–381381310368382465–5341245299149–In accordance with Directive98/37/CE199

13JACK STAND PAIRREF.Capacitykg/u.Basekg/pairCHB3000CHB60003.0006.000298403435622190x222254x3051019HEAVY VEHICLE JACK STANDSNew jack stands for trucks, heavyvehicles, trailers, etc.• Safety locking system and rubberprotector in saddle• Sold individually.REF.Capacitykg/u.kg/u.CHB8000CHB12000CHB16000CHB200008.00012.00016.00020.0003853454807456005157201.2007101832BOTTLE JACKSPNEUMATIC JACKSIn accordance with Directive98/37/CEECB20ECB30The lowest pneumatic jacks in themarket, 155 mm. and 220 mm.High quality professional jacksWorking conditions -20ºC to +70ºCWide range for several usesAll references include a safety valve inaccordance to VGB 8 standardCBADREF.ECB20Capacity2TWorkingpressure/bar72 STEPS PNEUMATIC JACKKg155 326 12REF.CB2CCB4CCB6CCB8CCB12CCB20CCapacity máx.Kg200040006000800012.00020.000Amm170195210215230235Bmm112127130138140135Cmm485870828575Dmm330380410435455445kg2,53,45,05,27,813,0REF.ECB30Capacity2TWorkingpressure/bar73 STEPS PNEUMATIC JACKKg220 477 14OptionExtension ECB21: 50mmExtension ECB22: 100mmLIGHT HYDRAUPNEUMATICJACK28Kg. jack with 22T capacityFoldable and extremely compact.Double piston with very low entrance: 166mm.– Step 1: 238mm & 22T capacity.– Step 2: 320mm & 8T capacity.The long handle allows to put the jack in the middle of the vehicle.Includes one saddle with "V" shape and one extensionIdeal for road service."Dead man" safety mechanismIn accordance with Directive98/37/CEREF.CH2208 238mm/22T 320mm/8T 160kg28u.1200

HYDROPNEUMATIC JACK1312Hydropneumatic jack specially manufactured to be used withnew generation industrial vehicles and trailers having lowpneumatic suspensions, or with low profile tires. Thanks to itsdesign it can be placed in narrow spaces and in any type ofvehicle.These jacks are in accordance with Directive 98/37/CE and arecertified according to the European Standard EN1494.2 extensions included(70 and 120 mm.)In accordance with Directive98/37/CEREF.1mm.2mm.3mm.Length of frame(mm.)Width(mm)Length of arm(mm)KgCH3015LCH6030222mm/30T213mm/60T300mm/15T269mm/30TN/A335mm/18T700mm730mm1501503003001.4001.4004754TRANSMISSION JACKSINGLE PISTONTRANSMISSION JACKDOUBLE PISTON"Dead man" safety mechanism.In accordance with Directive98/37/CE"Dead man" safety mechanismREF.PowerkgCDkgu.REF.PowerKgmm.CDEVE300MBVE500MBVE1000MB30050010001.1601.1601.1501.9601.9601.960570570570570570570252730111E107E1088001.5008508901.8701.950480480480480360360SWIVEL HEADSwivel head to be used whenworking with gear boxesREF.Max. KgVES5OO 500201

AUTOMOTIVE TOOLSSpark plug tools13CONTROLLEDTIGHTENING HANGERSPARK PLUG SOCKETS360 x 420REF.ZG418214 Hex3/8L230grs.260REF.ContentsTightening stops at preset torquegrs.PDBRWS123.73116 Hex16 Hex16 Bihex3/83/81/22509565300100130BO042 Torque wrench: BPR175, BPR286 Sockets PDB, RWI, RWS, ZB95616, PDB21,RWS213.000PDB21RWS21123.78121 Hex21 Hex21 Bihex3/83/81/22509065480280155CONTROLLEDTIGHTENING SETPRESET TORQUE SPARKPLUG WRENCHESREF.Contentsgrs.REF.NmColourLgrs.BCT1001 Torque wrench BPR1754 Sockets PDB, RWI, RWS, ZB956161 Reducing adaptor ADB 952800BPR175BPR2817,528RedGrey3/83/8200200450380202

SPARK PLUG WRENCHESL’L’STANDARDPROFESSIONAL13REF.L’Lgrs.REF.L’ Lgrs.063.181063.17116 Hex21 Hex6665285300345375063.431063.221063.241063.051063.01114161621216563636464300300450300450300310420320430SPARK PLUG PLIERSTo pull spark plug caps with no cable damageREF.063.301L290grs.265SEE GAUGE SETS INCHAPTER 11REF.ZG5352L200To pull spark plug caps with no cable damagegrs.200SPARK PLUG BRUSHSPARK PLUGTHREAD RESTORERGAFREF.mm.grs.REF.Compositiongrs.721.01145x15x13515TUBULAR INSERTGAF1 Short threading bit2 Inserts M14 x 1,25 x 12,72 Inserts M14 x 1,25 x 192 Conical inserts110203

GLOW PLUG SOCKET SETGLOW PLUG SOCKET SET13Spring ring ball type retainer system for avoiding the glow plug to fall down when removingor installing itComplete set of 1/4” drive 5 sockets for working almost all the glow plugs of the marketCardan system allows to reach difficult places and gives flexibility to the socketsBi- hexagonal sockets for allowing to work more efficiently400mm long 1/4” drive T- handle available for working with these sockets (ZH1210)REF.ContentL’ (mm)L (mm)L’LZH1200ZH1201ZH1202ZH1203ZH1204ZH12058, 9, 10, 12 y 14mm8mm9mm10mm12mm14mmApplicationPeugeot/Renault/Citröen/Ford/Mercedes…Opel/Fiat/Lancia/Alfa/Seat/VW…Merdedes/Peugeot/Audi/Seat/VWPeugeot/Renault/Citröen/BMW/Opel…Universal52525252527272727272HANDLE FOR GLOWPLUGSDIESEL PLUG TORQUEWRENCHLong T- handle with sliding bar that allows to reach anydifficult place when working with glow plugs1/4” drive for applying few torque to the glow plugsFor tightening at the correct torque.16º-22 teeth ratchet mecanism.REF.L (mm)REF.NmColorLgrs.ZH12101/4” 440 x 10BPR9 9 Amarillo 3/8200380Oil filter toolsPURFLUX FILTERWRENCHMETAL SHEETWRENCHREF.CF11Z040141Z040144768696ApplicationPeugeotCitröenRenault–RenaultTypebentbentflatL290300320grs.200300200For PURFLUX filterOperated by 1/2 or hex 27* Until stock runs out METAL SHEET WRENCHREF.CF04*CF05CF06CF07CF0866768696106grs.160240280300360204

CUP TYPE OIL FILTER WRENCH SET- 30 PIECES12Complete set of 29 cups and one 3 leg oilfilter wrench for making the oil service toany kind of vehicleVery good coverage due the various shapesincluded in the setREF.CF30CF3010015FCF3010615FCF3010815FCF3010818FCF3015103 3 Leg oil filter wrench 65- 120CF30656714F 65-67mm 14 FlutesCF306514F 65mm 14 FlutesCF306614F 66mm 14 FlutesCF30666F 66mm 6 FlutesCF306814F 68mm 14 FlutesCF307314F 73mm 14 FlutesCF307415F 74mm 15 FlutesCF30747615F 74-76mm 15 FlutesCF30757715F 75-77mm 15 FlutesCF307612F 76mm 12 FlutesCF307614FCF307630FCF30768FCF307815FCF308015FCF30808215FCF308616FCF308618FCF309015FCF309210FCF309315FCF309336FCF309345FCF309515FCF309618FDescription100mm 15 Flutes106mm 15 Flutes108mm 15 Flutes108mm 18 Flutes76mm 14 Flutes76mm 30 Flutes76mm 8 Flutes78mm 15 Flutes80mm 15 Flutes80-82mm 15 Flutes86mm 16 Flutes86mm 18 Flutes90mm 15 Flutes92mm 10 Flutes93mm 15 Flutes93mm 36 Flutes93mm 45 Flutes95mm 15 Flutes96mm 18 FlutesApplicationISUZU, MITSUBISHI…FIAT Ducato 2.5D, TD…VOLVO C70, S70, Tdi, 850Tdi…RENAULT Espace, Laguna, Master,Safrane, Traffic 2.4, 2.5, 2.8D, TD…FIAT Group, DAIHATSU, NISSAN…DAIHATSU, TOYOTA, NISSAN…FIAT Punto, RENAULT Clio, Express,Kangoo, Twingo…MAZDA, FORD Escort, Capri, SUBARU…TOYOTA, LEXUS…AUDI, GM, ROVER, CHRYSLER…FORD OPEL, ACURA, SATURN…GM, FORD, ISUZU, MERCEDES,VW Group…FIAT Ducato, Scudo, Ulysee, RENAULTMegane, Laguna, Espace IIIAUDI A3TDI, PORSCHE, MERCEDES,BMW…FORDFIAT Marea, LANCIA Delta…FORD, TOYOTA, HONDA Accord…NISSAN, HONDA, MAZDA, ISUZU,SUBARU, TOYOTA…MAZDA, SUBARU, TOYOTA…VOLVO S40, S60, S70, S80…VW Group TDI, RENAULT Clio, Laguna,Safrane, Espace D, Citröen, Peugeot,MERCEDES CDI…HONDA, MITSUBISHI, ISUZU…Group FIATGM, MAZDA, VOLVO, MITSUBISHI,NISSAN, VW Group, RENAULT…FORD…Group VW TDI 2.4, 2.6, 2.8….GM, ALFA ROMEO, CHRYSLER…AUDI A4, A6, TDI VW Passat TDI 87,RENAULT Laguna, Safrane, Espace 2.2DBMW…grs.7.10021521022021534513011511511513015013515515012514513013514516016518515518018017017018018517513CUP TYPE OIL FILTER WRENCHREF.CF30246FCF30276FCF30326FCF30366FCF30386FCF3066514F*Not included in the set24mm 6 Flutes27mm 6 Flutes32mm 6 Flutes36mm 6 Flutes38mm 6 Flutes66,5mm 14 FlutesApplicationMERCEDES, SMART…OPEL, MERCEDES…MERCEDES, BMW, Group VW, MINI,OPEL, FORD…OPEL…PEUGEOT, MITSUBISHI…grs.8080859595115205

OIL FILTER WRENCHTHREE LEGGED OILFILTER WRENCHREF.grs.REF.grs.CXW 761/2”300Z2002 70-1283/886013STRIP WRENCHREF.grs.Z2002A60-1183/81.160REF.grs.060.011060.021060.111060.12165-110110-155Spare strip 65-110Spare strip 110-1554354453030Application: MAN - KNECHTREF.grs.Z2003 85-1401/21.300THREE LEGGED OIL FILTERWRENCHSMAGNETIC OIL FILTERPULLERREF.Lgrs.060.20168-1102437720SREF.Øgrs.u.060.261060.271060.28155- 7268-110110-1424028002700111Non reversible wrench.REF.Lgrs.ADJUSTABLE WRENCHSTEPPED WITH HANDLE060.25165-1202155420SREF.060.221060.23162-9362-1213/83/8L3030grs.309325REF.060.171 80-110Steel strip.grs.370206

OIL FILTER CHAIN WRENCHOIL FILTER PUNCHER12The newest updated oil filter chain wrench providesmaximum power for removing even the strongest filtersCardan system allows to work in various sensesTwo different sizes for cars and heavy vehiclesNew PVC handle for having a better gripREF.Z010110ApplicationTo punch oil filter 76-96To extract remaining oil in filterTo extract vertical filtersL370grs.60013REF.L (mm)Øgrs.u.ZG3079ZG3080ZG3079CHZG3080CH350520350 (spare chain)520 (spare chain)50- 12050- 16050- 12050- 1607251.1004307501111UNIVERSAL STRAPWRENCHSELF GRIP PLIERSSUniversal.For filers, caps, exhauts,wheels, etc.BCLREF.grs.LARGE CAPACITYZ260196160200REF.LSBCgrs.u.641.07130010022178105Ideal for the removal of oil filtersADJUSTABLE WRENCH,STEPPEDSELF GRIP PLIERSSCLCHAIN CLAMPSteel strip, to be usedwith 1/2 accessoriesREF.LSCgrs.u.REF.grs.641.111641.21125030016016025259001.14011060.14180-1101/2220Holds easy and quickly irregular shapes, oil filters, mufflers, etc.207

AOil plug toolsOIL PLUG WRENCH13REF.SApplicationgrs.PNV8-10Citröen, Renault, Peugeot300SLREF.SApplicationgrs.u.062.0818Citröen, Peugeot23010REF.SApplicationgrs.u.062.1018-10Citröen, Renault, Peugeot28010SEE SOCKETS WITH BITIN CHAPTER 4OIL PLUG BIT SET5/16” OIL PLUG BITSREF.Descriptiongrs.REF.grs.u.062.351470.051 Bit holder 1/2062.211 Hex. bit 12 mm062.221 Square bit 10 mm062.231 Square bit 8 mm135062.211062.221062.2315 /165 /165 /1612–––1083126195555/16” BIT HOLDERREF.470.051 1/25/16grs.50208

OIL DRAIN PLUG SOCKET SET12The set includes 17 units of 3/8” square drive sockets withdifferent bits delivered in a plastic boxSockets are chrome vanadium with a polished finishingREF.u.8-9-10-12-13-14-17mm8-9.5-10-10,5-11-12-13,1mm10mm10mm16mmVID04VID0401VID0402VID0403VID0404VID0405VID0406VID0407VID0408VID0409VID0410VID0411VID0412VID0413VID0414VID0415VID0416VID0417ContentsHEX8HEX9HEX10HEX12HEX13HEX14HEX17S8S9,5S10S10,5S11S12S13,1XS10 femaleXT-10 triangularXZN M16 TamperedForBMW, FORD, Group GMGroup GMFORDFIAT, LANCIA, PEUGEOTUniversalLANCIA, MERCEDESGroup VWCITROËN, PUEGEOT, RENAULT, VOLVOHONDA, MAZDA, PEUGEOT, SAAB, VOLVOUniversalUniversalFORDTOYOTAUniversalBMW, FORD, RENAULT, TOYOTARENAULTGroup VW1111111111111111113OIL PLUG REPLACEMENT SETOIL RECOVERING TRAY- 20 l Capacity.- Manufactured in poliester.- For easy recovery of oils,refrigerating fluids, etc.For damaged threadsREF.Descriptiongrs.u.REF.a x b x cgrs.BVX5 replacement plugs Ø 145 replacement plugs Ø 165 replacement plugs Ø 185 replacement plugs Ø 208501V061.360 x 1.340 x 10010.000OIL PLUG REPLACEMENTConical thread, 150 pitchREF.Øgrs.u.BVABVBBVCBVD14161820204040601111209

BMW OBDII SERVICERESETTERVW, AUDI, SKODA, SEATOBDII SERVICE RESETTER13BMWVAGREF.Aplic.grs.REF.Aplic.grs.ST2010For all models after 2001 withOBDII plug inside the car200ST4010For all models from 1996 withOBDII plug in the car200OPEL OBDII SERVICERESETTERSERVICE LIGHTRESETTEROpelREF.ST3010Aplic.for OPEL Astra and Zaphira from1998 and Corsa C from 2000grs.200REF.ST1010Characteristics/ApplicationFully automatic, for all BMWmodels from 1892 to 2000grs.104VIDEO ENDOSCOPE WITH TFT SCREEN- 5,5mm tip• TFT LCD 3.5" screen for a perfect vision• Image and video recording system with downloading possibility• Adjustable focus• Ideal for inpecting places difficult to reach such as combustion chambers• Includes 4 LEDs in the tip for having light in the working area and a 45º mirror as anaccessory• All the necessary compact flash, cables, etc included in the carrying caseREF.ZHVIDEO210

Battery toolsDENSITY TESTERDIGITAL BATTERYTESTER 12V 100 A13REF.062.901Characteristics/ApplicationTo verify the battery chargethrough the acid density.Manufactured in hardened glassgrs.150BATTERY TERMINAL BRUSHREF.ZB3050Characteristics/ApplicationPolarity control function, battery chargetester & charging system readoutgrs.1400REF.721.041AplicaciónInternal and externalcleaninggrs.50CHARGERS-BOOSTERS 12/24VProtection against overcharges and polarity inversionRemember that the machines can be used as boosters but of batteriesthat are just a little bit weak. If you need to start a vehicle with a veryweak battery you need to use a booster which is designed for thatpurpose.We suggest charging the battery as long as possible before using themachines.REF.Single-phaseinput voltageFrequencyChargingvoltagePowerKWEffectivechargingcurrentCharging currentEN60335-2-29ªBoostingcurrentNominal capacity4h 15h (min./max.)ChargingpositionsDimensionsmm.Krs.Z420Z620230V230V50/60HZ50/60HZ12V - 24V12V - 24V1,6 - 102 - 107590507040057020/100020/155044330x360x650325x465x7301826211

BOOSTERSWith intelligent chargers that protect the boostersNo memory effect batteriesEasy and quick fuse checking systemUltra resistant polietilene housingNew accessories available, ask your distributor1312 V FOR CARSFor intensive useFor powerful 12V enginesAccessories adaptor12 V FOR CARSREF.12 VSTARTING/POWERLCABLESKg.REF.12 VSTARTING/POWERLCABLESKg.ELP1800A760CA/ 2.250A1,85m9,5ELP2400A1.200CA/ 3.100A1,85m14,5For those ones that need also a24V system from time to timefor boosting some light engines12/24V FOR LIGHT VANSFor those ones that need bothsystems and a very powerful boosterIdeal for big vans, trucks, agriculturalvehicles, etc12/24V FOR TRUCKSREF.12 VSTARTING/POWER24 VSTARTING/POWERLCABLESKg.REF.12 VSTARTING/POWER24 VSTARTING/POWERLCABLESKg.ELP3000A1.520CA/ 4.500A760CA/ 2.250A1,85m22,0ELP3200A2.400CA/ 6.200A1.200CA/ 3.100A1,85m26,0One of the most powerful booster of the marketBoosts diesel engines above 1.000HPIdeal for trucks, mining heavy vehicles, ships, littleaircrafts, helicopters, etc12/24 V HEAVY VEHICLESREF.12 VSTARTING/POWER24 VSTARTING/POWERLCABLESKg.ELP3500A3.200CA/ 7.750A1.600CA/ 3.875A1,95m55,0212

BOOSTERSBOOSTERSELP1800AELP2400AELP3000AELP3200AELP3500ATensionCranking ampsPeak ampsProtect against high tensionNo memory effect batteriesNumbers of batteriesExternal automatic chargerCharging capacityCharging max voltageAutomatic chargerCigarette lighter chargerAuxiliary connectorReverse polarity signal buzzerInsulated clampsCables lenghtCooper section of cableVoltmeterPolyetilene bodyNet WeightGross weightDimensions12V760CA2.250A11,3Ah14,7✕✕1,85m25mm29,5Kg12,5Kg380 x 430 x 120mm12V1.200CA3.100A11,3Ah14,7✕1,85m35mm214,5Kg14,9Kg380 x 430 x 120mm12/ 24V1.520/ 760CA4.500/ 2.250A21,3Ah14,7✕✕1,85m50mm222,0Kg23,5Kg400 x 450 x 220mm12/ 24V2.400/ 1.200CA6.200/ 3.100A21,3Ah14,7✕1,85m50mm226,0Kg27,0Kg400 x 450 x 220mm12/ 24V3.200/ 1.600CA7.750/ 3.875A27Ah14,7✕1,95m70mm255,0Kg59,6Kg1.050x500x300mm13CABLES FOR CARBOOSTERSAccessories for ELP2400A:REF.ELP860043DescriptionCable 4mx50mm-red-redREF.ELP860016DescriptionCable 3x50mm2-red-1000A clampsAUXILIARY JUMPCABLESWill allow a direct connection for specific usesAccessories for ELP3200A:Accessories for ELP3200A:REF.DescriptionREF.DescriptionELP860043Cable 4mx50mm2-red-redELP976001Cable 2mx50mm2-red-aviationREF.DescriptionELP860016 Cable 3mx50mm2-red-1000A clampsREF.DescriptionELP976003 Cable 3mx50mm2-red-CATERPILLARREF.DescriptionREF.DescriptionELP860015Cable 2mx50mm2-red-NATOELP860032Cable 1,2mx35mm2-red-NATOx2Accessories for ELP3500A:Accessories for ELP3500A:REF.DescriptionREF.DescriptionELP860038Cable 4mx50mm2-grey-redELP976002Cable 2mx70mm2-grey-aviationREF.DescriptionELP860034 Cable 4mx70mm2-grey-1000A clampsREF.DescriptionELP976004 Cable 3mx50mm2-grey-CATERPILLARREF.DescriptionREF.DescriptionELP860025Cable 5mx50mm2-grey-NATOELP860033Cable 3mx50mm2-grey-NATOx2213

JUMP CABLE FOR VEHICLES• With one red connector on one side and 2 rings on the other sideto connect to the battery terminals of the vehicle• For a quick connection, direct and totally safe (no risk of mistake)REF.ELP860039DescriptionCables of 1m, Ø50mm213CABLE ADAPTERSA 50cm cable with:• A very small clamp: for an easy connection on every small terminals suchas bike batteries, lawnmower batteries…• A small straight clamp: for an easy connection on the American andauxiliary terminalsREF.ELP860055DescriptionSmall Batteries• A 50cm cable with a small curved clamp and a small, straight clamp.• For an easy connection on terminals which are difficult to reach.REF.ELP860056DescriptionSmall BatteriesSPARE PARTS FOR BOOSTERSBATTERIESWALL CHARGERREF.PARAREF.ForELP180001ELP862120ELP862160ELP1800, ELP1800A, ELP3000 & ELP3000AELP2400A, ELP3200 & ELP3200AELP3500 & ELP3500AELP18001060ELP862502ELP30001071ELP862504ELP862500ELP862517ELP1800ELP1800A & ELP2400AELP3000ELP3000AELP3200 & ELP3200AELP3500 & ELP3500AFUSEREF.PARAELP862007ELP862009ELP832005300A - ELP1800A & ELP3000A x 5 units.500A - ELP2400A, ELP3200A & ELP3500A x 5 units.16A x 1 units.214

Exhaust toolsEXHAUST PIPECUTTERSELF GRIP PLIERSS13LCCHAIN PIPE CUTTERREF.Applicationgrs.REF.LSCgrs.u.ZG3933ZG3933ROCapacity: Ø 30 to 65 mm. Maximumthickness 3,2 mm. Suitable for stainless steel.Easy cutting without unassembling exhaust.Works in narrow spaces.1 spare blade3 blades are needed1.500641.121641.281250300757528288001.020- To cut stainless steel, PVC and copper tubes (max. 2,6 mm.)- Perfect for exhaust pipes- The cutting job can be done with a turning angle of just 90°11EXHAUST SPRINGPULLEROXYGEN SENSORSOCKETREF.Applicationgrs.REF.Lgrs.714.401Volkswagen, Audi400066.371 221/2” 2492235Heavy DutyREF.Lgrs.REF.Lgrs.ZG4224300280ZG41260122 1/2” 24 82280215

Garage accessoriesWorkshop lamp13WORKSHOP LAMPWITH CABLE REELWORKSHOPLAMP 230 VREF.ZM510ZM540ZM525ZM145ZM956Coiler (1)With neon lamp 220 VWith high luminosity 220 VWith lamp 220 VWith lamp 24 V (2)With female connector(1) Power: 2.000 W extended, 800 W winded. L cable = 15 m.(2) CONVERTER NOT INCLUDED.REF.ZM510BAZM51001ZM510PRZM831020ZM831060CharacteristicsLamp holders for ZM510Spare neon lamp 220 V for ZM510Spare screen for ZM510Metal protector for ZM525-ZM145Plastic protector for ZM540Kg.Cable3 x 1,5 mm 2 42 x 1 mm 2 42 x 1 mm 2 32 x 1 mm 2 62 x 1 mm 2 4ZM 510ZM 540ZM 525ZM 145ZM 956grs.20050505050SPARESREF.ZL2216ZL22160111 WattsCable length 5 mQuick onLow consumptionProtection IP54Againts the dustAgainst the water projectionsLife light bulb: 8000 hoursPolycarbonate screenImpact accuracySpare bulbCharacteristicsRECHARGEABLELED LAMP• Triple layer super resistant construction• Oil and chemical resistant• Swivel hook• Intelligent charger• Bright and very white light for easy colorrecognition• Lasting: 4 hours• IP54• Batery: NiMhgrs.700WORKSHOP LAMP 24 VREF.ZL30ZL80BatteryVoltage7.29.6BatteryAmps0,950,95L mm.320385Ø4040grs.350410u.11220V TO 24 VCONVERTERREF.Characteristicsgrs.ELP30ELP32ELP3001ELP300224VSwivel footL cable: 6 m.Rubber protection12VSpare bulb 24VSpare bulb 12V1.100REF.ELP31ApplicationFor feeding the lamp ELP30Exit 2 x 25 Wgrs.1.060216

FLEXIBLE LAMPMAGNET ANDMIRROR SET400mmREF.Applicationgrs.ZH10150Flexible arm to access difficult placessuch as doors, dashboards etc.80ZH12100Spare bulbREF.DV01ApplicationTo recover parts and toolsfallen in hard to reach placesL710mmgrs.26013LIGHTED ORIENTABLEMIRROR530mm14mmMAGNETIC DISH & TRAYREF.ZH5240ZH50103To control leaks in pipes, in all liquid conductionsSpare bulbApplicationgrs.180EXTRACTOR FLEXIBLEDE GARRASL:240mmW:150mmW:140mmL:150mmThe dish includes 1 powerful magnet while the tray has 2 with rubber coatedfor surface protection.Material: stainless steel mirror finishing with stamped brandingThe plastic part is an interesting improvement of this item.– Don't need a flat area for keeping the screws/nuts– It works even having aluminum, titanium and other type of screws/nuts not containing steel. It can be used as a hanger for carrying thematerial from one place to another.REF.grs.u.REF.Lgrs.ZR150ZR24042048011720.031 65080THERMOMETER WITH LASERPrecision ±1°.For temperature measuring withouttouching the object.Applications: verification of- Disc and drum brakes.- Thermostats.- Escape pipes.- Cooling systems.Resolution 8:1 (Example: 2 metersaway measures the temperature in adiameter of 25 mm.UNIVERSAL LEVERREF.Tº Rarge grs.REF.Lgrs.ZH880-50 to +550º C300066.101400480217

LubricationECONOMY GREASEGUNPROFESSIONALGREASE GUN13Universal grease gun with rigid extension and coupler.For 400 gr. cartridges or bulk 500 cc.With grease loading fitting.Universal grease gun with flexible extension and coupler.For 400 gr cartridges or bulk 500 cc.With grease loading fitting.REF.LBargrs.REF.LBargrs.062.501 4004131.000062.551 4006901.000FLEXIBLE GREASEHOSEHYDRAULIC COUPLERHeavy duty.Diagonally reinforced.Heavy duty.Hardened steel.4 jaws.With ball check.REF.dxDBar*Lgrs.REF.D x LBargrs.062.701062.721Pair work/breakage4,1 x 10,84,1 x 10,8400/950400/9503004505050062.791 15 x 3750050AIR OPERATEDGREASE GUNLEVER BARRELPUMPWith rigid and flexible extension and coupler.For 400 gr cartridges or bulk 500 cc.Discontinued action.For light and heavy oils and other noncorrosive fluids.For 50 to 205 l barrels.1. 1/2” and 2” threading.REF.062.601LBar420 345grs.1.200REF.Cap.062.651 16 l/minL1.200grs.4.000ROTARYBARRELPUMPOIL CANSFor continuous transfer of diesel and non corrosivepetroleum based fluids of light to medium viscosity.For 50 to 205 l barrels.1” threading.Reversible.Brass pump.Two steel valves.With flexible and rigid spout.REF.CCgrs.REF.Cap.062.661 30 l/minL1.340grs.4.000062.811062.841062.8612005001.000150200300218

12Workshop equipmentWORKSHOP CREEPER6 pivoting wheelsArm recessElevating head restREF.DimensionsHeightgrs.13CHV10001010 x 435 mm.150mm.8.000CHV10001Spare wheelWORKSHOP CREEPER & STOOLGeneric works all around the car such as works under the car, dismounting parts...etc4 swivel wheelsPlastic tray just under theseat area and lateralfabric pouches will allowus to have all thenecessary tools besideus.Using a creeper we make easy the action of going under the carREF.Descriptiongrs.u.6 swivel wheels and very comfortable lying area.PACKCONFORTWorkshop creeper & stool11.2901CAR PROTECTORWith magnets and suctionpads for an optimum graspREF.Dim.grs.ZL05900x580 mm480219

LIGHT TESTERFor standard and xenon lamps.Double laser for headlight andcar centering.Digital luxometer for newgeneration lamps.13REF.ZL2400ZL2401ZL2066ViCharacteristicsQuick action swivel base, with locking leverQuick action swivel base, with locking leverWith RS232C connectionlaser systemKg.43430,35EXHAUST SMOKE EXTRACTORAdjustable height. (10-80 cm.)Quiet operation.Portable.Small footprint and size.Vacuum capacity: 730 m3/hourDisposable filters: NOREF.ZT5000ZT500012CharacteristicsMotor 220 V 0,75 CV - 2.800 rpmInput diameter: 230 mm.Output flexible reinforced pipe: 125 mm. x 6 m.Spare pipe 6 m.Kg.30,01,3220

UNDER CAR TOOLSWheel toolsHYDRAULIC HUBEXTRACTOR SETHYDRAULIC HUBEXTRACTORREF.Descriptionkg.720 x 42013MOY03TComplete set25REF.Descriptionkg.REF.ContentsØ maxkg.RT10Hidraulic extractor8,020RT1001RT1002MOWAAMOXMTMOXBPWXNØ 140 body10T Hydraulic pressUniversal bodyAxle and sliding hammerHook Ø 16Metal panel 720x4201402302,22,24,58,00,82,7REF.RT1001RT1002MOXBPContentsRound dish10T hydraulic press4 hooks of 016Ø max140kg.2,22,20,8IMPACT HUB PULLER.CARS AND VANSHUB EXTRACTORBAREF.ANº hooksBkg.u.708.0412004193,7251REF.MOYApplicationImpact hub pullerkg.15,6REF.ContentsØ maxkg.MOWAAMOXMTMOXBPHexagonal dishSliding hammer4 hooks of 0162304,58,00,8221

WHEEL BEARINGTOOL SETLONG TORQUESOCKETS FOR WHEELSTo be used with IMPACT 1/2 tools. The slim diameter, its length, and theimpact action produces the torque indicated in the chart.Not to be used in loosening. Use only with impact power toolsREF.Size x torqueØ SocketØ AxleLgrs.ADAPTADORPULLERCAGEZK141001ZK141002ZK141003ZK141004ZK141005ZK141006ZK141007ZK141008ZK141009ZK141010ZK14101114 x 95Nm17 x 60Nm17 x 75Nm17 x 95Nm17 x 110Nm17 x 120Nm19 x 60Nm19 x 90Nm19 x 120Nm19 x 170Nm21 x 100Nm22.025.725.725.725.725.728.228.228.228.230.7111212121212131313131420821622821421921321922321621021423022724025628528423727529733228813REF.ZH70970Contents9 adaptors Ø 55,5 to 84 mm.1 cage - lining 76 mm.2 cages 86 and 91 mm.1 pullers 38 mm.1 centre axis, screw, pinApplication: VW, Audi, Opel, Fiat, Mercedes,Peugeot, Citröen, Renault, Ford, Honda, Mazda,Mitsubishi, Nissan, Austin-Maestro, BMWgrs.6.000UNE 16518ISO 6788DIN 3119WHEEL WRENCHESBSLBALL BEARINGSEPARATOR AND PULLERREF.065.011065.041Desig.N. 1N. 4S17x19x13/16x2224x27x32x 38B26x30x31x3336x40x47x65L380700grs.1.1405.600UNE 16518ISO 6788DIN 3119BSLREF.Desig.SBLgrs.065.021065.051N. 2N. 517x19x22x 1/2"24x27x32x 3/4"26x29x3336x40x473757001.2305.200REF.ZG513ContentsØ 45 a 90 mm.Depth 240 mmgrs.3.800UNE 16518ISO 6788DIN 3119BFOLDINGWRENCHSREF.Desig.SBLgrs.065.071N. 7 17x19x2226x30x333551.450222

WHEEL TOOLSBSTRUCK WHEEL WRENCHWHEEL WRENCH BARREF.SBLgrs.REF.LØgrs.065.101065.111065.121065.13124-2727-3232-3832-3336-4040-4646-5245-484004004004061.4001.4601.7901.500065.15150019995WHEEL TOOLS13BEXTENSIBLES“C”REF.Desig.SBLgrs.065.081N8 1928455extended795ALBMade with CrV material for the toughest work of levering the tyresThe special shape is design for helping the mechanic when acting, specially thebended one for truck wheelsBALWHEEL BALANCING PLIERSREF.LABgrs.061.671 250 2283355To place and install wheel balancing wheights.REF. L:mm A B grs. u.066.231066.241066.251066.261066.271300380530650650C2224282828771111112453459501.0801.08511111TYRE LEVER223

DEAD BLOW HAMMERS• Steel structure and PU layerhammers. Anti- sliding handle.• The striking area will not bemarked.• Ideal for wheel change,transmission works, etc.REF.Ø mm.Lmm.grs.u.REF.Ø mm.Lmm.grs.u.531.511531.53145653003001.5002.00011531.5511059105.400113SPECIAL IMPACT THIN WALL SOCKETSFOR WHEELS AND PLATFORMS• These special thin wall sockets allows towork in wheels and platforms even if theaccess is difficult.• For safety reasons, we recommend you touse the impact socket clip retainersREF. Bihex HexL grs. u.HVIS1265 •65 87 92 2.000 1HVIS0670HVIS0677HVIS0680HVIS0685HVIS0690HVIS0695HVIS06100HVIS06105••••••••70778085909510010596105108,5115121127134140961021021061081101151172.2002.3002.5002.6003.0004.5005.2505.50011111111224

SOCKETS FOR WHEELSSBPlastic protectionfor wheels onsocket wallsCAPlastic protectionfor wheels nutsinside the socketLREF.ABCLgrs.u.167.471167.491167.511167.521167.541171921222427293133351717222222303030303086868686862002302552602601111113The internal spiral profile makes it easyto remove rounded screw/ nuts fromwheels or any other placeThe best solution for tyre shopsTWIST SOCKETSREF.N° Pcs.Contentsgrs.PN760PN76010PN76011PN76012PN76013PN76014PN76015PN76016PN76017PN760193/8"3/8"3/8"3/8"3/8"3/8"3/8"3/8"3/8"3/8"1011111111110,11,12,13,14,15,16,17,19mm+bar10mm11mm12mm13mm14mm15mm16mm17mm19mm820303535555555607595REF.N° Pcs.ContentsSET IN PLASTIC BOXgrs.u.PN761PN76117PN76119PN76121PN76122PN761241/2"1/2"1/2"1/2"1/2"1/2"61111117,19,21,22,24mm+bar17mm19mm21mm22mm24mm1.400110130135145150167.931167.9513517, 19, 2117, 19, 21, 22, 248201.40011225

Brake toolsBRAKE BLEEDERPNEUMATIC BRAKEBLEEDERREF.Aplic.grs.13REF.Characteristicsgrs.ZH70855• Fast, efficient, air operated, brake bleeding procedure• 1,5l container equipped with over- fill check valve• 0,6l re- filler reservoir• Quick release locking trigger• Universal rubber bleed screw fitting• 700mm bleeder hose• Convenient hanging hook1300Z011001Z01100108Z01100110Z01100102• Suitable for brake liquid changing, andbleeding by aspiration in anyhydraulic and clutch circuit.• Suitable for ABS brakes,avoiding emulsion.• To be used with compressedair at 8 to 10 bar• Works by vacuumin the deposit.• Completely bleeds the circuitby aspiration• Avoids using additional capsin the brake liquid deposit• Avoids contact between brakefluid and air humidity• Plastic container for fluid recuperationsafe for liquid corrosion• Spare pipe and floater.• Spare connecting pipe.• Spare rubber connector.7.00030080BRAKE LIQUID DEPOSITACCESSORYREF.Aplicacióngrs.LEFT THREAD BRAKEPISTON PUSHING SETREP01Peugeot - Citroën, to beused with Z011001.120BRAKE FLUID TESTERREF.Contentsgrs.REF.Aplicacióngrs.ZRP2100450Left thread toolAdaptor Renault Master1.200ST1020To test the humidity degreein the brake fluid300226

UNIVERSAL BRAKEPISTON PUSHING SETDIGITAL MICROMETERADAPTORHOLDING PLATE0 - 25mmIncrease 0,001mmUniversal set for car.Left side winder included.REF.Contentsgrs.RETRACTING DEVICEREF.FRE06ApplicationTo check brake platethickness (0 - 25 mm.)grs.200ZRP21001 Right thread tool1 Left thread tool1 Base plate4.0001 Adaptor 3/8 - Hex 1214 Adaptors D32 to D63Alfa Romeo, Audi, Citroën, Citroën C5, Fiat, Ford, Renault, Renault Master, Seat,Subaru, Honda, Rover, Saab, BMW, VW, Jaguar, Peugeot, Lancia, Volvo.BRAKE PISTON PUSHERMAGNETIC BASEMICROMETER13Capacity 10 mm.Increase 0,01 mm.REF.Aplicacióngrs.REF.Applicationgrs.ZRP2100417Para pistones traseros Boschmontados en los Peugeot 206 RC, HDI y CC200FRE03FRE04To check brake disks flatness.Comparator only3.200200BRAKE PRESSURETESTER-160BAR.2 MANOMETERBRAKE TOOLSLREF.Usegrs.GFFAllows controlling the brake circuit pressureSpecially suitable when it is needed to checkfront and rear braking differences2 connectors of each model3.000For brake piston precise adjustment. Universal.REF.Lgrs.061.611210180227

HOSE CLAMPSTo temporary close flexible pipes. Forbrake flexible pipes.REF.LSBCgrs.u.CBL641.271235Ø 308063805METALLIC BRUSH13REF.721.111721.121L290(x3)290(x4)grs.150165REF.721.101L260grs.155BRAKE TOOLSREF.grs.REF.grs.ZG1210Brake spring plierL: 220 mm280061.311061.331Brake spring plierL: 220 mm.Brake spring plierL: 330 mm.240390LLREF.grs.REF.grs.061.351Brake spring plier, swivel headL: 300 mm.470061.301Truck brakespring plierL: 500 mm.1.055REF.grs.REF.grs.ZG1212Brake spring plierL: 300 mm.280ZG2050Hand brakespring plier280228

Suspension toolsMAC PHERSON SHOCK ABSORBER COMPRESSORPneumatic spring compressor with integrated protection.Universal.Independent jaws setting.Quick to use and fully safe.Working pressure 5-10 atm.Capacity 670 kg. at 6 bar.Jaws separation 380 mm.Spare air output.13REF.HLL’grs.u.CS5701.15047045050.0001MOVING STAND FOR SHOCK ABSORBER COMPRESSORTo be used with ref. CS570.REF.CS570OP1H300Kg.7,6229

SUSPENSION SPRING COMPRESSORTO BE USED WITH MAC PHERSON SUSPENSIONSMAXIMUM SAFETY• No risk of the compressed spring escaping•The body gets stronger when compressing springs• Includes a safety pin to avoid overloading• Forged steel forks, hardened to 65 - 85 kg/mm2.• Forks kept by fixed ends• Heavy duty body, composed by three machined steel tubes,with hardened surface• The forks holding nuts are trapped in the tubes, preventingloseningVERSATILITY• System composed by a universal body and interchangeableforks13DURABILITY• Internal trapezoidal thread, hardened to 100 kg/mm2 againstwearing under load• Closed telescopic mechanism avoids abrassive dirt arriving tothe thread• Factory greased for 1000 hours of use• Manufactured with high quality steelsWARRANTY• The tool is guaranteed for three years against anymanufacturing defect. Patented productMAXIMUM SAFETY, EASE OF USE, ECONOMYDissassembling and assembling MacPerson suspensions is a risky and complicated operationWith the IRIMO spring compressor the task is done easy and safelyThe important saving in time means the cost of the tool is quickly recoveredSUSPENSION SPRING COMPRESSOR SETSOpel*, Peugeot*, Citroen*, Ford*, Seat*, Volkswagen*.Opel*, Peugeot*, Citroen*.SETSETREF.Contentskg.REF.Contentskg.058.411CS500 - CS501 - CS502 - CS50517,0058.421CS500 - CS501 - CS50213,7* CONSULT APPLICATION CHART.230

SUSPENSION SPRING COMPRESSORSPRING COMPRESSOR BODYWide forks rangeCan be operated with pneumatic ratchetNot to be used with impact toolsHex 22 mm operationIncludes a safety pin to protect user and toolREF.CS500CS500G0CharacteristicsExtended lenght 530 mm.Minimum lenght 300 mm.Maximum wide 72 mm.Maximum opening 230 mm.Yield point 135.000 N10 spare pins baggrs.5.57020FORKS FOR SUSPENSIONSPRING COMPRESSOR13Standard forksnº 1 - 115 mm.Standard forksnº 2 - 175 mm.REF.ColourDgrs.REF.ColourDgrs.CS501Yellow99-1564.100CS502Red129-1744.100Standard forksnº 3 - 210 mm.Standard forks nº 4C15 rear - 305 rearREF.ColourDgrs.REF.ColourDgrs.CS503White139-2184.800CS504Green75-1303.600Standard forksnº 5 - 120 mm.Special forksPeugeot 607406 - 306 -206REF.ColourDgrs.REF.Colourgrs.CS505Blue71-1193.300CS512Pink4.100231

SUSPENSION SPRING COMPRESSOR,APPLICATION CHARTBRAND MODEL FRONT REARBRANDMODEL FRONT REAR13ALFA ROMEO 33 (1:993) - 145 - 146 - 155164166AUDIA390 - 90 - A480 QUATTRO - 90 QUATTRO100 - 200 - A6 2.0 & A6 2.5 TDI - A8200 VBBMW SERIE 3SERIE 5& 7740i 8cil.320i328i coupé525i - 530i VB525 TDSZ3CHRYSLERCITROËNDAEWOODAIHATSUFIATFORDVOYAGER - SARATOGA 3.0 V6VISIONNEON 2.0STRATUS 2.0 & 2.5 V6JEEP CHEROKEEJEEP GR. CHEROKEEJEEP WRANGLERLINA - AX - ZX AURA BREAKZX - C 25JUMPER - JUMPYEVASIONC15C15 EXSARAC3CUORE - SPARCARSIRION - CHARADE - APPLAUSEGRAN MOUE TERIOSCINQUECENTOPANDAUNO & 16 - FIORINO - RITMO - PUNTO 60PUNTO ELX - PUNTO GL - BARCHETTA 1.7 16 VBRAVO - BRAVA - MAREATREMPRA - TIPO - DUCATO 2.5 D - SAICENTOCROMA & 2.5 TDI TURBOCROMA TDI & 2.0 TURBO - SCUDO 1.9 TDPALIO WEEK-ENDULYSSE - SCUDOFIESTA - ESCORT - ORION - KA - PUMA - FOCUSFIESTA 1.3 COURIER - SIERRA - SCORPIOTRANSIT (MINIBUS)SCORPIO 2.0 16VESCORT D & RX3 - ESCORT BREAKMONDEOMONDEO V6 24VHONDA CMC 1.3 CRX - 16 VTI - PRELUDE 2.2 & 2.3LEGENDCIVIC 1.5 (91) & 1.6i - accord 2.0 ILS COUPECIVIC 1.5 SI COUPE - ACCORD 2.3I SRACCORD - PRELUDE 2.0ICONCERTO 1.4, 1.6 & 1.8 TDSHUTTLEHUNDAIKIALADAESPERO GIX - NEXIA GTXMATIZLANOS - NUBIRAATOS - ACCENTCOUPELENTRASEPHIA SLXSPORTAGE 2.0 - PREGIO - BESTHAPRIDECLARUSNOVANIVASAMARA - BATTICLANCIA Y 10PRISMA - DELTA - BETA - INTEGRALETHEMA - EPSILONEKAPPATHEMA TD V6 - IE - 16VDEDRA - DELTA 1.6 - 1.8 - 1.9DELTA 1.6 GT EIZETAMAZDA 121 1.3121 1.8 D - ASTINA GLX 1.5 - 323 1.3 - LX - 5323ASTINA 2 GT V6626626 1.8626 2 Oi 16 & 2.5L V6626 2.0 D929XEDOS 6 V6 2.0 - XEDOS 9 V6 2.5MX5 (97)MX5 (98)MX3 - MX6321111321213212233311112332121151511-2512332-133311125231552512211532111222333351212332351215111551113512144411135125121551121515211111511221152511NISSANMICRACHERRY - PRAIRIE - SILVIAALMERA 1.4 - 1.6 - ALMERA 2.0 DSUNNY - 100 NX 1.6, 2.0 & 1.6 SLXSERENA 2.0 SLXPRIMERAPRAIRIE 1.8 SLX - 2.0PRAIRIE 2.4MAXIMAOPEL KADETT - 185 & GSI (91) & 1.65 (92)KADETE 85 I - ASCONACORSA - ASTRA - VECTRA TURBO 4x4 - CALIBRAVECTRA 1.6 16V - 1.8 16V - 1.7 TDVECTRA 2.0TIGRA 1.4i & 1.6 16V - ASTRA ECCOTURBOREKORD - OMEGA - MONZA - SINTRAARENA - MOVANOPEUGEOT 104106205 - 206 - 305 - 309 - 405 - 406305 BREAK504 - 505 - 604 - 605 - J5806 - EXPERTBOXERPARTNER607PORSCHE 924 - 944928 - 968 - 993 - 911RENAULTTWINGO - ALPINE - A310MEGANE - SCENICSUPER 5 - EXPRESS - CLIOR9 - R11 - R19 - MEGANE - TRAFICR18 - R20 (81-1) - ESPACE 1, PH 1R20 - R30R21 - NEVADA - LAGUNAR25*R25 GTSSAFRANE* (SALVO SUSPENSIÓN PILOTADA)TRAFICESPACE* JE, XX, SE (97-)MASTERRAPID - KANGOOMASTER 98ROVER214 - 218 - 414 SLI620 S623 SI220 SDI220 E TURBO - LAND ROVER 200 - AUSTIN200 (96)400LAND ROVERRANGE ROVERSAAB 900 - 900 2.0 COUPE 9.3 - 9.59000SEATSKODASUBARUSUZUKIMARBELLA - TERRA VITREIBIZA 1.05 CIIBIZA - CORDOBA - TOLEDO - IBIZA 1.8 GTITOLEDO GT 2.0FURA - MALAGATERRAAROSAALHAMBRA130L - 150S - 150L - RAPIDOCTAVIALEGACY 20 GL 4WDLEGACY GX 4WD ABSVANILLEIMPREZA TURBO 16VFOSTER - SVXALTOSWIFTBALENOVITARAJIMNYWAGONTOYOTA STRALET - PASEO - MR 2COROLLA - CARINA E TD - PICNIC 2.0COROLLA GL (92- CARINA 2L & GLI)CELICA - CARINA 1.6 (16V) - TERCELSUPRA 3LCAMRY - CELICA 2L GTI - AVANSISCAMRY 2.2 (16V) - COROLLA 1.8 GTIPREVIA 2.4L - CAMRYRUNNERRAV-4VOLKSWAGENPOLO - GOLF - JETTA - SIROCCO - POLO 1.3 16VVENTO - PASSAT 1.6PASSAT - CORRADOSHARAN 2.0SHARAN 1.9 TDI - VW BUS T2LUPO511131-53312111122122-122233212151322673252-25323112252125531251111512111-313351215112152331112315112555151552-155511551351152325155512111215123MERCEDESMITSUBISCHICLASSE ACLASSE V - VITOCOLT - LANCERCOLT 1.5 GLXI-GALANT 1.8 & 2.0-CARISMA 1.9 TDCOLT GTI 1.8 - GALANT 2.0 GLS (92)GALANTRUNNER 1.8 GLX & 3.0 GLXSPACE WAGONSIGMA12112-51233551VOLVO S.40 1.8 - 2.0240 - 440 - 460 - 480 - 740 - 760 - 940 - 960850SYMBOLS:C = SlidingF = Fixed* = Renault 21, conical springs, use 3F fork (botton) and 2C fork (top).1325232

SPRING COMPRESSORTURNBUCKLE SET FORMC PHERSON SHOCKABSORBER'S TOP LIDLREF.058.611058.621L300400grs.2.0002.390Simple threadREF.grs.Complete set of 39 pieces for making theservice of McPherson shock absorbersThis special set allows the mechanic to do theservice safer and much more quickerCovers the majority of the market cars usingMcPherson suspensions13GMF2.500REF.Descriptiongrs.u.CS1000Set8.0001MECHANICAL PUSHERVW GOLFREF.ERV100SUSPENSION PULLINGCABLE SETPEUGEOT 106REF.TMS106grs.700grs.40CABLE AND BIT SETPEUGEOT 305-309-405CITROËN C 15CS100001CS100002CS100003CS100004CS100005CS100006CS100007CS100008CS100009CS100010CS100011CS100012CS100013CS100014CS100015CS100016CS100017CS100018CS100019CS100020CS100021CS100022CS100023CS100024CS100025CS100026CS100027CS100028CS100029CS100030CS100031CS100032CS100033CS100034CS100035CS100036CS100037CS100038CS100039HEX FEMALE14- HEX MALE19MMHEX FEMALE16- HEX MALE19MMHEX FEMALE17-HEX MALE19MMHEX FEMALE18-HEX MALE22MMHEX FEMALE19-HEX MALE22MMHEX FEMALE21-HEX MALE22MMHEX FEMALE22-HEX MALE22MMHEX FEMALE24-HEX MALE22MMHEX FEMALE27-HEX MALE22MMBOCA PLANA 3MM-HEX10MMBOCA PLANA 3.5MM-HEX10MMBOCA PLANA 4MM-HEX10MM4MM-HEX10MM5.2MM-HEX10MM6MM-HEX10MM6.3MM-HEX10MM7MM-HEX10MM8MM-HEX10MM9MM-HEX10MM10MM-HEX10MM12MM-HEX10MMHEX MALE 5MM-HEX10MMHEX MALE 6MM-HEX10MMHEX MALE 7MM-HEX10MMHEX MALE 8MM-HEX10MMXZN 12MM-HEX10MMTORX T60-HEX10MMTORX T50-HEX10MMD5-HEX10MMD10-HEX10MMHEX FEMALE8-HEX10MMHEX FEMALE9-HEX10MMHEX FEMALE10-HEX10MMHEX FEMALE11-HEX10MM10.5X3.5MM-HEX2212.5X3.5MM-HEX2214.5X5MM-HEX2214.5X3MM-HEX2214X2.5MM-HEX221301501401851701852252452958085808590100959510510510511010010010010010095809011510095951055545506055111111111111111111111111111111111111111REF.Z030901grs.160233

Drive line toolsBALL JOINT SEPARATORBFor the removal of the ball pin from the taperedhousing on steering and suspension armsTo disassemble spherical joints in the drive andsuspension of automobiles and vans.AREF.ALgrs.REF.ABgrs.13714.121714.131714.141714.151714.16118232940453403403603603607508001.0001.1001.200714.301714.321223250857102.400A'BBAAREF.AA’Bgrs.FORD, BMW, VOLVO, TOYOTA, OPEL, VW, AUDI, RENAULT, NISSAN,FIAT, OPEL REKORD E, SENATOR, MONZA, VW TRANSPORTER.ZG3621ZG8534242887090801.5601.440UNIVERSALREF.ABgrs.A'714.341714.361* 2 positions202050*50-80*1.0001.400BAREF.AA’Bgrs.714.221714.241714.261714.2811823374740506075354556783005007001.500OpelREF.ABgrs.714.38170701.000REF.AA’Bgrs.RBR224745640234

HOSE CLAMPMANUFACTURING SET SETHOSE CLAMPPLIERFor clips of stainless fix,pipes, sleeves.For preparing your own hose clamps:sleeves, transmission foldinghoods...INSTRUCTIONS OF USE1 2 3REF.Z1200grs.2804 5STAINLESS COIL 5 mm x 0,3SETREF.grs.Z0113421.260OETIKER HOSECLAMP PLIER13COMPOSITIONLREF.Z1200Z011336Z011337Z011340PlierStrip 25 m.100 endsStrip holdergrs.28028040220REF.ZG854L230grs.470SETSTAINLESS COIL 10 mm x 0,3REF.Z011343grs.1.680LEVER ACTIONLCOMPOSITIONREF.grs.REF.ZG2087L275grs.395Z1200Z011338Z011339PlierStrip 25 m.100 ends280580120PRE-CUT HOSE CLAMPSCARDAN SPRINGRINGS PLIERGROUP WV, BMW, CITROËN,PEUGEOT, FORD, OPELREF.Z1211Z1214DescriptionSet 50 unitsSet 50 unitsL420870Ø55130grs.260540CHROME PLATED, PVC HANDLESBENT NOSEREF.622.071L200A30B55C2,4grs.200u.1ABL235

AXIAL JOINT TOOLWHEEL DRIVINGGEAR TOOLRENAULTRENAULTFor replacement of axial joints.Use ful with RET 109REF.grs.REF.grs.RET1091.680RET110360WHEEL DRIVINGGEAR TOOL3/4 REAR HUB SOCKETRENAULTPEUGEOT13For replacement of axial joints.Use ful with RET 109REF.grs.REF.grs.Z040307240PM013/4 36430For rear hub nut. Fiat-Peugeot131.411 3/4 41 550For transmission Peugeot J5236

ELECTRICALCRIMPING GRIP PLIERCRIMPING PLIERNON INSULATEDLProfessional crimping grip plier for open end barrel terminals, from 0,5 to 6 mm.Double action lever tightening mechanism reduces effort required.LREF.630.011Desig.N. 1L220mm 2cable0,5 - 6grs.195u.5NON INSULATEDREF.Desig.Lmm 2cablegrs.630.141N. 42200,5 - 6500NON INSULATEDLREF.Desig.Lmm 2cablegrs.u.630.071N. 32200,5 - 62105For open barrel terminals.13Professional crimping grip plier for insulated barrel terminals, from 0,5 to 6 mm.Double action lever tightening mechanism reduces effort required.LINSULATEDINSULATEDLREF.Desig.Lmm 2cablegrs.REF.Desig.Lmm 2cablegrs.u.630.111N. 42200,5 - 6500630.041N. 22200,5 - 62105SETSREF.25 of eachgrs.REF.25 of eachgrs.630.901(standard)630.0411.290630.911(adjustable)630.1111.290237

CRIMPING PLIERREF.mm 2cableu.REF.mm 2cableu.630.1610,5 - 2,51630.1910,08 - 6,01PACKARDCONNECTION TOOLSELECTRIC CABLECUTTER13REF.066.361L140grs.100REF.655.701L170grs.220CABLESTRIPPING PLIERWIRE STRIPPERProfessional plier lubricated permanently thanks to its petroleumjelly deposit.Pressure of cut of adjustable cable isolation with adjustingsystem. Adjustable length between 5 and 10 mm. Patentedsystem of adjustment to the diameter of the cable.Light weight reinforced nylon tool. Ergonomic tool ideal for electrical/electronicmaintenance and production line applications.Stripping capacity: 0,08 mm2 to 6,0 mm2.Cutting capacity: 4,0 mm2 (stranded copper).Built-in cutter. Gripping power adjustment. Self adjusting throughout its capacity range.Adjustable length stop.REF.EL32Cap.grs.0,2-6 mm 2 200REF.629.101629.111grs.0,08 - 6,0Repair kitu.11238

TRAILER ELECTRICALPLUG TESTERSECURITY CODESAND ELECTRONICCIRCUIT PROTECTORFor 7 pin connectorSingle person operated. Includes 4m long cableREF.ST7030grs.300ELECTRONICCIRCUIT PROTECTORTo save radio, airbag, and alarm codes if battery is removedProtection against current peacksREF.VFeaturesgrs.ELP20AELP20BELP20D121224Wall socket 220Battery 12 VWall socket 2201.3209001.040VOLTAGE DETECTORUNE 16516ISO 238013To be used with the car batteryProtection against current peaks originated by welders or starters.In the case of receiving a stroke of high power,it is made unusable like a fuse, after protecting the vehicle.REF.ELP12AELP24V1224grs.750750SCALREF.S x C x AVLgrs.u.429.1010,5 x 3 x 556 - 24V130245TENSION ANDCONTINUITY TESTERREF.630.151Cap-Vol6 - 690 Vgrs.140239

ENGINEDiagnosticPRESSURE ANDVACUUM PUMPGARAGE STETHOSCOPEREF.Applicationgrs.REF.Applicationgrs.ZH405ZH405MZH4100Metal body. Pressure 1,5 bar. Vacuum 0,9 bar.Universal toolFor controlling: Depression, turbo (waastegate valve),gasoline pressure regulator, EGR valve,brakes, etc.Spare gaugeSpare kit of piston1.58010050ZH6606To hear and identifyvehicle noise.• On the road under car noises.• Engine noises, hearing moving partsinside the carter.• Includes a swicht selector to activatedifferent sensors.2.380ZH65010Composition:- 6 sensors and cables.- Direct hand bore- 6 input cables.- 2 batteries 9V.Earphones13TURBO PRESSURETESTERTHERMOMETER FORLIQUIDSREF.Applicationgrs.REF.Applicationgrs.ZL04To check the pressure andvacuum of turbosScale from -1 to +3 bar.1.080ZL810 - 1600 Water-oil280240

REFRACTOMETERFOR LIQUIDSDIESEL FUEL PRESSURETESTERREF.Applicationgrs.ZLF2030It performs three functions visuallyChecks the antifreezing capacity ofthe cooling and windscreen wiperliquids, and battery acidAdjustable crystal lensTriple scale150REF.ApplicationBargrs.RenaultPeugeotZ23700Diesel fuel pressure tester for Peugeot andRenault vehicles. It is supplied with two quickconnectors 8 and 10 mm.51300QUICK OXIGENSENSOR TESTERHEATERS HDI8 x 1,001/4 GAS10 x 1,50REF.Applicationgrs.REF.grs.ST1040Without dissassemblingthe sensor160ZFBH150DIESEL PLUG TESTERSPARE KIT HDIREF.ST1030ApplicationTo verify individually diesel plugs withoutdisassembling them or starting the engineDIESEL COMPRESSIONMETERgrs.260REF.Z404B28grs.300GASOLINECOMPRESSION METER13REF.Applicationgrs.REF.CD300CD30001ApplicationPressure 5 to 60 bar. Remote starter includedDelivered with 100 cards, and 13 adaptorsBox with 50 spare cards.grs.16050CE25CE2501CE25JCE2502CE2503Pressure 1 to 18 bar. Remote starter.Supplied with 50 cards. Patented automaticspark plug hole connection.50 spare card bag.Spare rubber bitSpare melallic bitSpare complete valve2.080501015100241

GASOLINE TIMINGLIGHTDIESELTIMING LIGHTREF.Applicationgrs.REF.Applicationgrs.LSE200For 2T and 4T engines• Tachometer range 400 - 9.900 rpm.• Advance 01.60 degrees. Valve angle,by cylinder 20 - 99,9 degrees.• Peak tension 0,2 - 60 V• Reading memory 6 s.• Three readings at the same time.Automatic selection of number of cylinders1.660LSD350Piezolectric captor• Tachometer range 300-600 rmp• Advance range 2 to 60º• Operating range 0,2 to 60 V• Peak tension 0,2 - 60 V• Reading memory 6 s• Includes Ø6 captor1.940ADAPTORAPPLICATION CHARTENGINE OILPRESSURE TESTER13CONECTORROSCAVEHÍCULOALFA ROMEOAUDIAUSTINROVERBMWBRISTISH LEYLANDCHRYSLERCITROËNDAFFIATFORDLADALANCIAMAZDAMERCEDESOPELPEUGEOTPORSCHERENAULTSAABVOLVOVWTOYOTAZ4494-1M10 x 1•••••••Z4494-2M12 x 1,5•••••Z4494-3M14 x 1,5••••••••••Z4494-4M16 x 1,5•••Z4494-5M18 x 1,5••••Z4494-61/8” x 28••••Z4494-71/8” x 27•••••Z4494-81/4” x 18•••••REF.Z4494Z4494 MAZ4494 TUApplicationIncludes 8 adaptors. 8 bar gaugeSpare gaugeSpare hosegrs.800150200242

Injection circuit and pumpINJECTOR SOCKETDIESEL INJECTORTESTING PUMPZS4468ZS4469REF.ApplicationLgrs.ZS4468ZS446922 mm - Universal27 mm - Universal1/21/280mm82mm190223INJECTOR OFFSET WRENCHREF.ZL11YZL1102YZL1103ApplicationOperates up to 600 bar. To test diesel injectors outside theengine. Test the opening pressureVerify the different jets in shape.The pump can also serve to check the injection circuit, toverifly leacks.Includes a pressure gauge, in bar and lb/inch2.Heavy duty design. Includes 14 x 14 mm and14 x 12 mm. connectorSpare bucketSpare gaugegrs.6.000REF.Applicationgrs.ZG417617 mmFor high pressure pipeCommon rail G97Opel - Peugeot - Renault3/8135AJUSTABLE CROWFOTINJECTION SETTINGWASHER SETS13REF.ABCDELgrs.u.REF.Applicationgrs.001.8312926566514,5661701*RPF150European cars washers520* Until stock runs out243

GASOLINE INJECTIONAND PRESSURE TESTERFUEL PUMP REMOVERSApplication: Opel, Renault,Peugeot, CitroënREF.ZG4118ZG4108Pipe Ø75 a 120120 a 160grs.360400PSA GROUP FUEL TANKGAUGE PULLERCovers all PSA Group carsREF.Applicationgrs.ZL201ZL200CZL20026• Mechanical and electronic systems• Mono and multipoint systems• Efi systems Bosch, Lucas, Weber, Marelli,Ford GM, Rover…Spare gauge 0-2,5 bar D 60Spare gauge 0-10 bar D 905.000100100REF. Ø min. Ø max. grs. u.Z97801001708501GASOLINE PRESSUREADAPTORS SETPUMP INJECTIONFLYWHEEL PULLERREF.Applicationgrs.ZL23665Renault: Twingo, Clio, Megane, KangooPeugeot: 206, motor 1,1 y 1,4 l.Ford: all modelsThose adaptors are included in the set ZL201500REF.Z040139ApplicationChrysler, Fiat, Opel, Renault, VolvoS8V - S9V - J8S - F8M - F8Qgrs.86013FUEL LINE DISCONNECT TOOLSZG3971ZG3972ZG3973REF.ZG3971ZG3972ZG3973Line Ø8108 - 10grs.707070ZG3974COMPLETE SET244

TOOLS PROFILE 5 POINTS5 POINT BIT SOCKETNEW PROFILE 5 POINTSTABLE FOR THEIDENTIFICATIONOF SIZEUse:• Injection pumps Cummins, CAV, Rotodiesel.• System of injection Bosch.• Application in VW, Mercedes, Audi, BMW and Opel Corsa C.es1015202527304045e2,63,03,64,24,75,16,17,4REF.104.101104.151104.201104.251104.271104.301104.401104.451S1015202527304045L2828282828282828D1212121212121212grs.13131414141415155 POINT KEYSREF.Descriptiongrs.104.011Set of 8 sockets1255 POINT BITSREF.SL1L2grs.452.101452.151452.201452.251452.271452.301452.401452.4511015202527304045545760646876849021232426273034374456661525REF.476.101476.151476.201476.251476.271476.301476.401476.451S1015202527304045L2626262626262626grs.5555555513REF.Descriptiongrs.REF.Descriptiongrs.452.011Set of 8 bits71476.011Set of 8 bits50ANGLE METERREF.ZS4099Application0 to 360° graduationsØ 240 mmInjection pump and engineto be used with cod.RXO-DXgrs.100245

Engine setting/locking and timingtools Diesel Injection pump timing** See other injection pump tools in previous sectionMASTER KITDIESEL ENGINE AND INJECTION PUMP TIMINGINJECTION PUMPS TIMING KITREF.Applicationgrs.REF.Applicationgrs.CPD85Peugeot, Citroën, Audi, VW, Seat, Ford, Opel,Fiat, Mazda, Rover, Volvo, Bosch VE Rotary,Diesel Kiki, Nippondenso, CAV, Rotodiesel.5.000Z4400ABosch VE, CAV, Rotodiesel, Kiki, Nippondenso20013DISTRIBUTION BELT SERVICING SETBELT TENSION TESTERREF.grs.REF.Applicationgrs.CPD831.460TDC01TDC0107To easily test the tension in2 to 8 mm belts.Spare tip n° 75205246

MASTER KITENGINES RENAULT, DIESEL AND GASOLINEENGINES RENAULT dCi / OPEL DTI / NISSAN dCiREF.Applicationgrs.REF.Applicationgrs.Z23069RENZ2306950Z2306958ZG3997Diesel: 1.9D/TD, 2.1/2.2 D/TD, 2.5D/TD, 2.8DGasolina: 1.2/1.4/1.7, 1.4/1.6/1.8/2.0 16V,2.28V,2.5 20VTiming tool kitTiming pulley alignment toolTiming belt tensioning tool6.5001.930600280Z23173Renault: 1.5 dCi, 1.9D, 1.9dCi, 1.9TD, 2.2 dCiOpel: 2.2dTi, 2.5 dTiNissan: 1.5 dCi2.80013ENGINES PSA, DIESEL AND GASOLINEENGINES OPEL, DIESEL AND GASOLINEREF.Applicationgrs.REF.Applicationgrs.Z23061PSACitroën C5 2.0 HPi, Peugeot 2.0 16V / CitroënXantia, Xsara, Picasso, Dispatch, Jumpy,Synergie, Evasion, C5 / Peugeot 206, 306,307, 406, 607, 806, DW10 2.0HDi / C5 , 406 /607 DW12 2.2 HDi3.600Z23058OPELDiesel: 1.5 D / TD, 1.6 / 1.7 / DTD,2.0 /2.2 Di,2.0 / 2.4 TDi, 3,0 / 3,1 TD, Isuzu 2.0 DGasoline: 1.2 / 1.3 / 1.4 / 1.6 / 1.0 IZV / 1.216V / 1.4, 1.6 16V / 1.8, 2.0 16V6.400247

MASTER KIT(B)(D)(L)(A)(I)(K)ENGINES FORD, DIESEL AND GASOLINEENGINES VAG, DIESEL AND GASOLINEREF.Applicationgrs.REF.Applicationgrs.Z23160FORDDiesel: 1.8 / 1.9 TD, 1.9 TDi, 2,5 Di / TurboGasoline: 1.25 / 1.3 / 1.4 / 1.6 50HC y 1.6 /1.8 / 2.0 16V2.400Z4440VAGZ2304401Z2304403Z2305602Z2306912Z2316103Z231611BDiesel: 1.0 / 1.2 / 1.3 / 1.4 / 1.9TDi,1.7 / 1.9 SDi y 2.8 30VLong tensioning keyLong tensioning keyCamshaft blocking tool V6 TDITension blocking keyCranckshaft blocking toolCamshaft blocking tool(A)(B)(D)(I)(L)(K)3.600ENGINES FORD AND GROUPE PSA DIESELREF.ApplicationZ23175 Ford Diesel: 1.4TDCi - 1.6TDCi - 2.0Di/TDCi -2.2TDCi - 2.4TDCiGrupo PSA Diesel: 1.4HDi - 1,1.6HD/Digrs.2.040ENGINE SETTING/ LOCKINGAND TIMING TOOLSu.1ENGINES BMW, DIESEL AND GASOLINEREF.Z23048BMWApplicationBMW diesel and gasoline M42,M44, M50 Y M52grs.2.40013ENGINES OPEL, DIESELREF.Diesel enginesZ4332Motores diesel.grs.900ENGINES FIAT GROUP, DIESEL AND GASOLINEREF.Z23111ApplicationDiesel: 1.7D/TD, 1.9D /TD/JTD, 2.0&2.4JTD.Gasoline: 1.2, 1.4, 1.6, 2.0Lgrs.7.000LOCKING DEVICEREF.Z4500ApplicationTwin cam engines.Quad cam engines. Diesel engines.grs.300LOCKING DEVICEREF.Z4650ApplicationUniversalgrs.200248

2 ARM PULLER- EXTRATHIN LEGSCAR V-BELT PULLEYPULLER SETL SHAPE ARMS80-140mmW SHAPE ARMSLB135-235mmAREF.Applicationgrs.REF.ZK10014ZK10024A130200B100150Torquemax.80 Nm190 NmPowerTn4,56,5EPR235EPR2351EPR2352W shape armsL shape arms2.620Cap. 135-235mmCap. 80-140mmALTERNATOR PULLEYPULLER COMBI SETLBAREF.ZK11314ZK11324A130200B100150Torquemax.80 Nm200 NmPowerTn5,57,0SPLINE EXTRACTOR SETREF.ZH1300Contentgrs.4 Pins* H1785030mm*H221/2”*H1033 teeth*H15, H221/2”* T50, M10H10* T40, T50, M8, M10, H8, H10Complete 13 pieces set for extracting alternator pulleysCovers almost all needs of the car parSPROCKET HOLDINGTOOL13REF.Z4355ApplicationRenault, Peugeot, Citroën.grs.850Complete set of 15 for extracting any kind ofbroken splineDivers sizes includedNiCrMo material gives a perfect quality levelto the bitsBELT TENSION TOOLREF.L mmgrs.ZH11001/2”283- 4- 5- 5,5- 6- 8- 10mm1/8"- 3/16"- 1/4"- 3/8"1.0005/8”2811- 12- 14mm1/2"REF.ZG3997ApplicationG8T, Renaultgrs.220249

FLYWHEEL HOLDINGTOOLSEXTRA FLATRATCHETREF.Applicationgrs.REF.Applicationgrs.RXDRenault 1.7, 2.2 gasolina, 1.8 D, 12.1 D diesel, Renault20 RET1123/8 and 1/4 L=140Reversible, Extra-flatLaguna diesel 2.2 to use withFemale Torx E14 (cod. 112.94)3/8 socket120ECCENTRIC TENSIONERSCREW WRENCHUNIVERSAL TOOLS1/2T50REF.RET115ApplicationG8T Renaultgrs.200REF.Z4361ApplicationS8U, S9U, J9R, J5R, J6T, E6J, E5F,E7F, E7J, F7R. Fiat, Renault.grs.200Valve and camshaft toolsVALVE COLLETINSTALLING SETVALVE COLLET TOOLREF.Applicationgrs.REF.ApplicationLgrs.Z3110Especial Opel1.5 - 1.5T - 1.7T diesel engines used in the Astra/Belmont,Astra - F, Cavalier, Corsa, Kadett, Vectra-AFor valve maintenance. For a quick and easy collet installing280061.551061.571Cars Volkswagen, Audi, FiatSpare jaws275–2401013VALVE SPRING COMPRESSORREF.Applicationgrs.REF.Applicationgrs.RET11102For slot pusherRenault350RET11107For slotless, edged pusherRenault350250

VALVE GASKET PLIERVALVE REMOVING TOOLFor removing valve stem gasket and dismounting valve springretainer. Suitable for all VW-Audi cars with overhead camshaft suchas Golf, Passat, Audi 80 and Audi 100.REF.061.631061.621ApplicationStandardEngines 24 valvesL250270grs.335330REF.Z3041ApplicationOpel / Vauxhall - Head positioned camshaftengines 1.3 - 1.4 - 1.6 - 1.8 - 2.0 (petrol) 1.6 DA -1.7 D up to 1992, 1.7 DR (diesel) - Nova - Corsa -Astra - Astravan - Belmont - Kadett - Ascona -Cavalier - Vectra.Allows valve removing without taking away thecamshaft and without damaging the upper partgrs.140VALVE SPRING COMPRESSORVALVE SPRINGCOMPRESSORREF.Applicationgrs.REF.ApplicationCapacitygrs.ZS5533Renault - Citroën - FiatCompression tool for valveclearance setting300061.051061.081061.091Buses, lorries, agriculturalIncludes straight and bent jawsSpare jaws, straightSpare jaws, bent90 - 280120 - 28090 - 2502.540100110VALVE SPRING TOOLVALVE SPRINGCOMPRESSORVALVE SPRINGCOMPRESSOR13Lever for camshaft elevatingfor collet replacing.To be used with thetool cod. 061.55REF.Desig.LApplicationgrs.REF.ApplicationCapacitygrs.061.751061.681061.691061.701N. 1N. 2N. 3N. 4220245200210(VW / Audi de 4 cylinders + modelsDiesel from 7/82)(VW / Audi de 4 - 5 - 6 cylinders +Engines Diesel from 8/82:Volvo de 6 cylinders and Diesel)(Fiat 128; 128 Rallye, Coupé, Ritmo,UNO)(Ford 1,6 Diesel).200220135230061.011061.031Cars and vansSpare jaws60 - 125-1.115110251

Cylinder head toolsMany modern cars use adhesives to fix cylinder head bolts. To unscrew them,use a hot air pistol to weak the adhesiveCYLINDER HEAD BITSOCKETS XZNCYLINDER HEAD JOINTKNIFEREF.SLApplicationgrs.REF.SLgrs.185.401185.421M10M12100100Rover, ToyotaRenault, VW, Audi, SeatMercedes, Opel, Volvo.115165061.28122255170CYLINDER HEAD BITSOCKETS TORX®BIT SOCKET SETComplete set of socketswith diverse bits forengines and automotive ingeneralAvailable within a set orloosenREF.SLApplicationgrs.183.561183.711T55T70140140Citroën, Peugeot, RenaultMotor Ford 1800 Diesel.240240320x180x55ANGULAR GAUGEREF.DescriptionNº Pcs.grs.T49Bit socket set in metal box493.600Contents13REF.075.761075.711075.721REF.RXONM1/21/23/4L415450550DescriptionComplete setTypeClipMagnetMagnet1/2grs.267313410grs.280CLIPMAGNETREF.T4901T4902T49T30XLT49T40XLT49T45XLT49T70HLT49T80HLREF.T49H4T49H5T49H6T49H7T49H8T49H10T49H12T49M5T49M6T49M8T49M10T49M12T49T20HT49T25HT49T27HT49T30HT49T40HT49T45HT49T50HT49T55HT49T60H30mmHEX 04 - 30mmHEX 05 - 30mmHEX 06 - 30mmHEX 07 - 30mmHEX 08 - 30mmHEX 10 - 30mmHEX 12 - 30mmXZN M5 - 30mmXZN M6 - 30mmXZN M8 - 30mmXZN M10 - 30mmXZN M12 - 30mmTORX T20 - 30mmTORX T25 - 30mmTORX T27 - 30mmTORX T30 - 30mmTORX T40 - 30mmTORX T45 - 30mmTORX T50 - 30mmTORX T55 - 30mmTORX T60 - 30mmDescriptionSocket 1/2Socket 3/8Bits TORX T30 200mmBits TORX T40 200mmBits TORX T45 200mmBits TORX T70 100mmBits TORX T80 100mmREF.75mmT49H4L HEX 04 - 75mmT49H5L HEX 05 - 75mmT49H6L HEX 06 - 75mmT49H7L HEX 07 - 75mmT49H8L HEX 08 - 75mmT49H10L HEX 10 - 75mmT49H12L HEX 12 - 75mmT49M5L XZN M5 - 75mmT49M6L XZN M6 - 75mmT49M8L XZN M8 - 75mmT49M10L XZN M10 - 75mmT49M12L XZN M12 - 75mmT49T20HL TORX T20 - 75mmT49T25HL TORX T25 - 75mmT49T27HL TORX T27 - 75mmT49T30HL TORX T30 - 75mmT49T40HL TORX T40 - 75mmT49T45HL TORX T45 - 75mmT49T50HL TORX T50 - 75mmT49T55HL TORX T55 - 75mmT49T60HL TORX T60 - 75mm252

Piston toolsPISTON RING TONGPISTON RINGTIGHTENERAnti wind-up ratchetREF.Øgrs.REF.ØLgrs.061.111061.13155 - 10080 - 120260290061.211061.231061.251061.27140 - 7557 - 12580 - 17590 - 175508080165100215260515PISTON RING TONGRATCHET PISTON RINGTIGHTENERIncludes a spring operated ratchet.Easy releaseREF.Øgrs.061.15160 - 160200REF.ØLgrs.061.17157 - 12580255PISTON RINGGROOVE CLEANER13REF.ØeLgrs.061.16150 - 1752 - 2,5 - 3 - 3,5330560Spare bladesREF.990.021990.031990.041e2 - 2,5 - 3 - 3,54 - 4,5 - 5 - 5,53/32”, 1 /8”, 5 /32”, 3 /16”.grs.505050253

Cooling system toolsCOOLING CIRCUIT TESTING ANDREFILLING MACHINEFEATURES:* Controls the correct operation of the expansion cap valve* Controls leaks in the cooling systems* Allows to make the vacuum in the circuit* It fills the system without needing to use bleedersREF.DRZ2000DRZ50010Set of caps for DRZ2000COOLING SYSTEMTESTERCOOLING SYSTEMTESTER13REF.Applicationgrs.REF.ZH70889ApplicationUniversal cooling circuit and cap tester. Controlsde circuit, the caps and detects leaks.Alfa, Audi, BMW, Citroën, Daewo, Daihatsu, Fiat,Ford, Honda, Hyundai, Jeep, Lancia, Land Rover,Mazda, Mercedes, Mitsubishi, Nissan, Opel,Peugeot, Renault, Rover, Saab, Seat, Skoda,Suzuki, Toyota, VW, Volvo...grs.2500ZS3720ZS3722RIUAERIKRIIRIXRWURWYSetFor testing radiator leaks, expansion vase, hosingand cylinder head coverZS3722, RIUAE, RIK, RII, RIX, RWU, RWY.Pressure pumpRenault radiator capVW Audi ø50 capStandard bayonet ø60 capCX, 104, R 18 Saviem, Renault Express capCap valve tester, ø60 bayonetExpansion vase cap valve tester, CX, 104, R 182.0001.0008012080100160120254

UNIVERSAL CAPCOOLING SYSTEMVACUUM FILLERREF.ZS3725ApplicationTo be used with ZS3722 pump.grs.460REFRIGERATINGCIRCUIT LEAK DETECTORREF.PA03ApplicationUsing vacuum, refrigerating circuit isfully filled without air bulbsgrs.1.500FLEXIBLE HOSECLAMP PLIERSREF.CharacteristicsØLgrs.REF.Applicationgrs.ZG39502 positions18 - 53280450ZGDC16ZGDC161If leak exist, the CO2 from combustion goes to the coolingsystem. The testing material will change colour. Includesdetector, cap and reactive.Spare reactive 480 ml.620280FLEXIBLE HOSE CLAMPPLIERS WITHLOCKING PAWLLEAK DETECTION SET,ULTRAVIOLET LAMPREF.ApplicationØLgrs.ZG3951Retainer foreasy useTurning heads12 - 5528043013FLEXIBLE HOSECLAMP PLIERREF.Applicationgrs.FR704CRFR704LFR70003FR7040CFR4838Detection of liquid. For all liquid refrigeration,without the alteration of the colour.Composition: Lamp for LED FR704BGlasses of protection FR70003Automatic loader FR704C12 bottles of liquid FR4838500REF.061.761ApplicationTo be used withsmall head clamps, used inVAG: VW, Audi, Seat, SkodaL190grs.165255

SPRING HOSECLAMP PLIERFLEXIBLE HOSE PLIERFRE10To temporary throttle flexible pipes.Quick and easy to use. Light and strong.REF.061.511CharacteristicsTurning head jawsL210grs.180REF.FRE08FRE09FRE10ØUp to ø1313 - 1919 - 57grs.4080140HOSE CLAMP PLIERCOOLING LIQUID TESTER(ETHANOL)REF.ZG040514UseFor installing and removingL200grs.180REF.062.911Capacity-35º - 0ºCharacteristicsTempered glassºC direct readingPlastic caseL540grs.160GR HOSE CLAMP PLIERUNIVERSAL FLEXIBLEHOSE CLAMP PLIER13REF.ZG4199ApplicationFor easily installing and removing EGR typeclamps in difficult or hard to reach places.Softgrip handlePeugeot, Citröen, Renault, Audi,VW, Mercedes, Toyota, etc.L850grs.700REF.ZG3954ZG3954 CAZG3954 KITApplicationTo operate hard to reachflexible clampsRatchet type holdingmechanismSpare cableRepair kitØ18 - 54L630grs.700UNIVERSAL FLEXIBLE HOSE CLAMP PLIERREF.ApplicationØLgrs.ZG5414To grip the plastic hose clamps usedin the cooling systemsRatcheting type holding mechanismSoftgrip handle18 - 54560675ZG3954KITRepair kit256

SOFT PIPE CUTTERHOSE CLIPSRELEASING SETWarning: Sharpened bladeNever place fingers insideREF.FRE11Ø3 - 25Application/CharacteristicsFor cutting plastic, rubber, nylon pipesOne hand operated.grs.180REF.066.321Capacity5/16” - 3 /8” - 1 /2” - 5 /8” - 3 /4” - 7 /8”grs.80Clutch toolsCAR AND VANUNIVERSALCLUTCH ALIGNERCLUTCH ALIGNERREF.Contentgrs.REF.Applicationgrs.NILBarDouble cone, Ø14,5 to Ø30Cone, Ø28,5 to Ø4011 cylinder, Ø12 to Ø22.1.440NIMFor clutch aligning before installing engine200CLUTCH STOPREMOVING PLIERELASTIC PIN INSTALLER13REF.Applicationgrs.REF.Applicationgrs.RET108Renault120RMMFor Ø5 pinsRenault3 rod set.200257

Other tools / Accesories for airconditioningDYE INJECTORDYE INJECTORTo be used withFR399To be used with FR49912 bottlesREF.grs.REF.grs.FR331Includes 2 dye bottles of 30ml400FR13601300SET OF 4 DYE BOTTLESSET OF 12 A/C DYESREF.R12 and R134A gasTo be used with FR331injectorml.REF.ml.R12 and R134A gasFR3994 uses per bottle30FR499127,5DYE INJECTORMULTI USE DETECTORLIQUID13REF.FR471Includes a dye bottle of 120mlTo be used with FR49910 bottlegrs.800REF.FR4832ml,30DYE BOTTLEWATER LEAKSDETECTORR12 and R134A gasREF.ml.REF.ml.FR4991032 uses per bottle240FR4877,5258

UV PORTABLE 12 LED LAMPQUICK COUPLERREF.FR704Lgrs.58012 high intensity leds, to detectfluorescent dyes3 hours lastingSafety googles and automaticcharger includedUV LED FLEXIBLE LAMPFOR LEAK DETECTIONTo be used with reference FR480 on high pressure circuitsREF.grs.FR48001100VACUUM OIL PUMPREF.FR134HUml.500REF.LSupplied with UV shield glasses and3 batteries AAgrs.A/C O-RING SETFR430450mm340A/C DYE CLEANERTo be used in A/C R12 and R134A circuitsREF.FR128grs.540REF.FR481ml.960RACORDS, VALVES ANDUNIVERSAL CAPS KIT13A/C LEAK STOPPERTo transform R12 circuits into R134AREF.grs.REF.grs.FR480250FRRFK1.000259

O-RING KITSET OF 2 QUICKCONNECTORS HIGH ANDLOW PRESSUREREF.ApplicationFRBMW1FRFIA1FRFDE1FRFDE2FRMER1FRNIS1FROPV1FROPV2FRPSA1FRREN1FRVOS1FRVAW1BMWFIATFORD EUROPA 1FORD EUROPA 2MERCEDESNISSANOPEL VAUXHALL 1OPEL VAUXHALL 2PEUGEOT – CITROEN 1RENAULT 1VOLVO-SAABVW – AUDIREF.FR51grs.300R12-R134 VALVECORE TOOLCONNECTOR OF 3 METERSFOR A/CREF.TLVC2grs.65R12 VALVE CORE TOOLREF.Y13401Y13402Connector high pressure 3mConnector low pressure 3mgrs.350330MULTI-PORT DIGITALTHERMOMETER13REF.TLVC4grs.100VALVE CORE TOOL, FORJAPANESE CARSIt controls the sufficiency of the refrigerant in the system. Auto-Control of thebottle when dehydrating.Extra large probe storage area protects the two 15ft / 4.5 m general purpose probes (included). °F or °C selectable.Multipurpose temperature measurement instrument with three remote temperature stations.Temperature range: -40º to 150ºCOperating temperature : 32°to 140°F / 0°to 60°C9V alkaline battery - 20hrs continuous useREF.grs.REF.grs.TLVC6105FR1261.345260

ELECTRONIC THERMOMETERELECTRONIC LEAKDETECTORREF.FR201The unit incorporates a highly accurate stainless steel 96mm puncture probe with a 1m cord.Packed full of features, including a user selectable temperature alarm, a countdown timer,Min/Max, °F/°C selectable and memory functions.Measured temperature range from - 50°c to +260°cgrs.120LASER THERMOMETERWITH INFRAREDREF.FR120FR122grs.575585GAS COLLECTORSERVICE STATIONTemperature measured range: -50ºC to 550ºCPrecision +-1%Ratio 8/1REF.ZH880grs.220UV LEAK DETECTION SET WITHDIGITAL THERMOMETER ANDSTOP-LEAK1 UV LED lamp (FR430)Dye injector for low pressure(FR48003)1 leak stopper with dye integrated (FR480)6 universal dye for UV leakdetection (FR49912)1 digital thermometer (FR201)4 batteries and 1 UV shieldglasses (FR70003)REF.FR600grs.1.800SPECIAL HOSE CLIPSRELEASING SETThis portable station allows the gas recovering in the air-conditioning system and to collect this gas in a collectortank (ref. Y13436)Could be used by one person.This station is not bulky and is equipped with a safe automatic shutt-off feature once the pressure 17 bars isreached.Application: For gas recovering in the air-conditioning system of damaged vehicles or intended for destruction.Compressor recovery capacity : 15 Kg/hProtector fuse of 6AVoltage : 220 VREF.FR100Dim.450x250x300mmPeso16kgAIR CONDITIONINGPERFORMANCE TESTERThis digital tester analyses the ambient andvent temperature of the A/C system and withprobes indicates instantly if coolingperformances are acceptable.This tester is equipped with an automatic shuttofffeature and suspends from hood latch orattaches to your manifold gauge set andperform quickly performance test under anyambient temperature condition.Supplied with a probe cord length 3 meters forthe ambient temperature and another one of1.5 m for the inside temperature of the vehicle.9V battery included13REF.u.grs.REF.grs.0663216 units105FR707245261

BODY SHOP TOOLSSheet tools-WeldingBODY SHOP HAMMERHardened and tempered to 52 /58 HRcAsh wood handleHardened and tempered 52/58 HRcAsh wood handleREF.NºØLgrs.u.REF.NºLgrs.u.531.201140353084401BHN1228 308290 1Hardened and tempered 52 /58 HRcAsh wood handleRound face groovedHardened and tempered 52/58 HRcAsh wood handleREF.NºØLgrs.u.REF.NºØLgrs.u.531.231240353084401BHP132828 308290 113REF.BHMBHMD22Nº11Ø2822L308308Hardened and tempered 52 /58 HRcAsh wood handlegrs.315300u.11REF.531.261Nº3A x B50 x 30L295Hardened and tempered 52/58 HRcAsh wood handlegrs.u.320 1262

BODY SHOP HAMMERHardened and tempered 52/58 HRcAsh wood handleGrooved beating face.Hardened and tempered 52/58 HRcAsh wood handleFlat beating face.REF.NºLgrs.u.REF.NºØALgrs.u.BHZ1450 x 30 295200 1531.30144020308390 1Hardened and tempered 52/58 HRcAsh wood handleBentHardened and tempered 52/58 HRcAsh wood handleBarrel round face.REF.NºØALgrs.u.REF.NºØALgrs.u.531.36164320308475 1531.33154020308390 1SPARE HANDLESREF.531.401Nº7Ø40L308Hardened and tempered 52/58 HRcAsh wood handleConical point.grs.u.360 1REF.531.951531.961for531.201-531.231531.301-531.331531.361-531.40 -BHM-BHN-BHP531.261 - BHZu.1ROUND DOLLIEAMERICAN DOLLIEHardened and tempered 52/58 HRcHardened and tempered 52/58 HRc13REF.Øgrs.u.REF.mm.grs.u.532.40155780 1532.45182 x 64 x 34980 1263

HEEL DOLLIESPOONHardened and tempered 52/58 HRcREF.mm.grs.u.532.48165 x 80 x 289001CURVED DOLLIEREF.532.701Ø270 x 50Hardened and tempered 52/58 HRcgrs.u.850 1Hardened and tempered 52/58 HRcREF.mm.grs.u.Hardened and tempered 52/58 HRc532.511127 x 64760 1REF.mm.grs.u.AMERICAN DOLLIE532.731400 x 601.200 1BUMPING BLADEHardened and tempered 52/58 HRcREF.mm.grs.u.BHR85 x 55 x 25800 1Hardened and tempered 52/58 HRcRADIAL DOLLIEREF.532.761mm.500 x 60grs.u.1.800 1Hardened and tempered 52/58 HRcHEAVY BUMPING BLADEREF.mm.grs.u.BHJ140 x 55 x 157501WEDGE DOLLIEHardened and tempered 52/58 HRcREF.532.791mm.525 x 60grs.u.2.300 1Hardened and tempered 52/58 HRcREF.532.541Nº grs.u.127 x 66 x 271.300 113ALU BODY HAMMER AND DOLLIES SETThis special set allows to work the more andmore common alu body parts of the new carsThe set, delivered in a plastic case, includes– 1 hammer– 3 hammer heads– 3 “stones” with different weight for the head60 gr. – 100 gr. – 140 gr.– 1 wrench for tightening the hammer head– 3 dolliesThe composition of the material of the hammerand dollies is– Polyamide: gives structure to the wrench– Elastomer: gives flexibility– Mineral base: gives hardener to hits and tohigh temperaturesREF.ZG4280grs.u.4.000 1264

BODY SHOP SCRAPESFILE BLADESLABLAAREF.ABgrs.u.CURVEDREF.STRAIGHTREF. Z”ALgrs.535.011535.021535.031535.041508010512090120120120132835401111534.101534.111––534.201*534.2119 rough12 medium9 rough12 medium35353535350350350350290290290290SETREF.Contentsgrs.u.536.0114 50 - 80 - 105 - 1201201AXIAL GRIPS“C” CLAMPSBSCL“C” STEELSuitable for flat workpiecesREF.SBCLgrs.u.AXIAL GRIP L*641.251270290405001.700 1REF.Desig.OpeningDepthLgrs.u.PANEL EDGE PLIER641.351L0 - 18–1904101REF.UseLgrs.ZG4268For disassembling unions ofpanel edges in bodyworks280570BODY FILE FRAMESuitable for spot weldingAXIAL GRIP WREF.Desig.OpeningDepthLgrs.u.641.371W0 - 15361954751Confortable handleTwo positions user friendly soft grip handle systemFor 14” milled filesBLA13REF.ABLgrs.u.534.05114030370700 1* Until stock runs out265

SHEET METAL GRIPWINDSCREEN WIPERSREMOVERCBSREF.641.451S45B50C80L200grs.520u.5LREF.ETR100ApplicationRenaultgrs.160WINDSCREEN WIPERSREMOVERMICRO GRIPREF.641.571L92grs.u.115 1REF.Applicationgrs.EXTRA LONG GRIPSETR110Renault300WINDSCREEN WIPERSREMOVERSLALUMINIUM JAWSCREF.SBCLgrs.u.*641.631*641.64112516560080040407859851.9002.10011REF.ETR40ETR60ApplicationUniversal 17-23mmUniversal 28-34mmgrs.100100UPHOLSTERYSTAPLE PLIERDOOR UPHOLSTERYREMOVE PLIER13For installing staplesin airbag fitted seats.For easy removal of car upholstery clips andstaples.REF.grs.REF.Lgrs.u.ZG4147280061.6512301901* Until stock runs out266

UPHOLSTERYREMOVE LEVERTOOL SETREF.Lgrs.u.061.66128017014 OFFSET LEVER SETREF.Contentsgrs.ZG4144For M4 to M8 nut crimpingGM6 GM5, 2 ESM6300RIVETERLREF.Contentsgrs.ZH706104 levers1.400AZH70611ZH70612ZH70613ZH70614210 mm lever310 mm lever460 mm lever610 mm leverTRIM REMOVER SET200300400500REF.546.011Remache2,43,0 - 3,24,04,8L250Aluminium••••A75CAPACITYCopper••grs.520Steel-cupronickel••u.1SPARE DIE - 546.01REF.546.101546.111546.121546.131546.151ContentsDie 2,4 mm.Die 3-3,2 mm.Die 3,8-4 mm.Die 4,8-5 mm.3 jaws setCBALREF.LABCgrs.u.546.02152016022581.8001Riveting capacityThese tools avoid any damage in the dismounted partsSave time and any potential injury to the mechanic for using screwdrivers and soGives the possibility of combining 2 or more wrenches at a timeREF. grs.u.ZG4401Set 4 pieces1501Riveter3,0 - 3,24,04,86,06,4SPARE DIE - 546.02REF.546.201546.211546.221546.251Aluminium•••••Copper•••••ContentsDie 3,8-4 mm.Die 4,8-5 mm.Die 6-6,5 mm.3 jaws setSteel-cupronickel•••••13267

HAND TOOL SET FORTHREATED INSERTSM3:M8WINDSCREENJOINT CUTTERREF.grs.ZKJ21Set that includes a nut riveter with 5 inserts .Sizes: M3/M4/M5/M6/M82.300REF.Applicationgrs.ZB700169CJ01FCJ01PTo removewindscreens.Single person operatedSpare cable 25 m.2.000160NUT RIVETER SETUNIVERSAL BODYSHOP HOLDERREF.Contentsgrs.ZKJ28For nuts Ø 3, 4, 5, 6, 8, 104.100REF.Usegrs.SPARE SHAFTREF.ZKJ2803ZKJ2804ZKJ2805ZKJ2806ZKJ2808ZKJ2810NUTSØ3456810SUP02To keep in position doors,bumpers, mirrors, etc.Suitable for paintingLight and with wheels7.000BOD WORKSHOP STANDSREF.SContentsgrs.ZKJM3ZKJM4ZKJM5ZKJM6ZKJM8ZKJM10M3M4M5M6M8M10200 nuts bag200 nuts bag200 nuts bag200 nuts bag200 nuts bag200 nuts bag4005007007001.0001.60013For roof works.For painting, roof panel beating,roof windows installing, etc.Light, stable and foldableMax. load 120 grs.REF.Z534CharacteristicsLength 1.310 height 550Length 1.030 height 300Kg.11,5268

SPRAYING PISTOLHANGING ACCESSORYSUCTION CUPSREF.ContentsØFLgrs.Z011263For windscreen handling2 double suction cups and belt120150 kg.4002.200To be used withbody workshopstands.For hanging lighttools like aspraying pistol or alight welder.REF.HKg.REF.ØFgrs.Z541534Does not include platform900 m.2,8Z01120712075 kg.400Metal sheet pullerWELDING AIR PULLERBODY SHEETPULLER COMBGROUNDCONNECTORREF.ØLgrs.ZWS0676Bag of 50 units2350600REF.ZWS100ZWS3112ZC2331Characteristics/ContentsPneumatic operated, four phases: welding,pulling, turning and coolingPistol ZWS101, electrodes ZWS3112, fileZWS3118, screwdriver ZWS3119Ground connector D13mm male5 electrodes setStar shape soldering tipgrs.5.0004034u.1SOLDERING ELECTRODE13REF.Usegrs.ZWS0680To be used withZWS0676100269

MAINS TRANSFORMERTRACTION HOOKREF.ConexiónUsegrs.ZWS0669M 14To traction pullerZWS0668200LEVERREF.ZW3201CharacteristicsTo be used with welding air puller ZWS100Three phased, 380 V 1100 A210 x180 x390 mmgrs.16.000REF.ZWS0690UseTo be used with the pullerZWS0668grs.1.760PULLERSPOTTERREF.ZWS0668UseTo be used with comb Cod. ZWS0676It can be used with hands,with hook ZWS0669,with lever ZWS0690, or with weld stationgrs.900OPTIONAL CONECTORSREF.Characteristicsgrs.13ZWS1825ZWS1826ZWS1891ZWS1890ZWS5590ZWS1827COMPATIBILITYCEBORATELWINTECNOMECZECAHELVIFIMERW&SPower connectorPower connectorPower connectorGround connectorGround connectorConnectorCEMONTPower connectorZWS1825ZWS1826ZWS1891D 19 mm3 leggedclipD 13 mm5 leggedthreadD 19 mm5 leggedclipD 13 mm femaleD 13 mm maleD 13 mm femalecable + terminalD 12 mm604060220260100Ground connectorWithout adaptorZS5590Without adaptorQuick puller for metal body workingCapacity to weld all type of accesories ( washers, rivets...)Capacity to weld only in one side, to leave the parts ready for the work380 V. Two phases + earthREF.ZC3000ZWS3112ZC2331Includes1 3000A spot1 pistol1 pulling bar1 mass cable1 accesory tool1 trolley5 electrodes setstar shape soldering tipkg.34,500,0400,034270

1TOOL DISPLAYS2345678Supports and accessories to be used on the exhibitor guaranteea maximum use of it.EXHIBITOR WITH LIGHTThe flexibility of the system allows you to have an exhibitor foreach need.MODULAR TRAYDISPENSER910REF.Cap.grs.11910.9015 mod.610SUGGESTED HOOKS FORA SINGLE EXHIBITOR12EXHIBITORREF.N.º Pcs.u.REF.N.º Pcs.u.1314910.301910.331SIZES: 1.000 x 2.250 x 400REF.910.311emptywith 65 hooksN.º Pcs.1.000 x 300OPTIONAL SHELFu.111910.32164 P40 P - 910.2215 P - 910.2416 P - 910.2512 P - 910.2614 P - 910.2713 P - 910.2814 P - 910.2911264

GRIP DISPLAYSINGLE HOOK123REF.910.431N.º Pcs.EmptyREF.910.221910.231mm.Ø 5 x 200Ø 3 x 200u.114DOUBLE HOOKOPEN END WRENCHHOOK567REF.mm.u.REF.Foru.910.2412001910.261910.271910.281910.2916 x 7 - 8 x 1010 x 11 - 16 x 1717 x 19 - 22 x 2424 x 26 - 30 x 3211118PLIER HOOKSELF WITHDIVIDERS910REF.910.251mm.200u.1REF.910.381910.391Sizes1.000 x 250ContensTray with 15 dividers10 additional dividers11Versatile tray for display of sockets, hex keys, chisels... and other product difficult to hang.1213Allows the positionning of accessories. For all socket sizes.14265

1PLIER SHELFCURVED HOOK23For pneumatic pistols 1/2REF.mm.u.REF.mm.u.4910.361500 x 2501910.37185156470 x 320 x 4801/2” SOCKET DISPENSER308 x 300 x 4253/4” SOCKET DISPENSER78CONTENT IN mm.REF.N.º Pcs.Contentskg.REF.N.º Pcs.Contentsgrs.910910.081910.7611104Empty dispenser mm.BIHEX8 socket 197 socket 22 - 23 - 24 - 26 - 27 - 286 socket 29 - 30 - 32 - 335 socket 36 - 384 socket 41 - 42 - 46 - 504 ratchet head Cod. 135.5017,046,0910.011910.721910.8011202202Empty dispenser mm.HEXBIHEX12 socket 10 - 11 - 12 - 13 - 14 - 1511 socket 16 - 1710 socket 18 - 199 socket 20 - 218 socket 22 - 23 - 247 socket 26 - 27 - 286 socket 29 - 30 - 327 ratchet head 250 mm. 125.5015.45027.45027.45011SINGLE HOOK FORDISPLAY UNITS1213REF.910.421L30grs.402 units of the hook 912.42 will allow you to hang the rapid wrench dispenser and thescrewdriver and the screwdriver dispensers on the display unit.14266

SCREWDRIVER DISPENSER123EN609004REF.ContentsSizes (mm.)REF.ContentsSizes (mm.)910.491910.191CONTENSEmptyNº Pc: 83500 x 450 x 250500 x 450 x 250910.461910.401CONTENSEmptyNº Pc: 84500 x 450 x 250500 x 450 x 2505Nº Pcs.Nº Pcs.Nº Pcs.Nº Pcs.Nº Pcs.Nº Pcs.0,5 x 3 x 750,8 x 4 x1001 x 5,5 x1251,2 x 6,5 x15088760,8 x 4 x1001 x 5,5 x1251,2 x 6,5 x1501,6 x 8 x1751,6 x 10 x20087666PH-0 x 75PH-1 x 100PH-2 x 125876PH-0x 100PH-1x 150PH-2x 1758760,4 x 2,5 x 750,5 x 3 x1000,6 x 3,5 x1000,8 x 4 x10088881 x 5,5 x 1251,2 x 6,5 x 1501,2 x 8,0 x 1757666SCREWDRIVERDISPENSERSCREWDRIVERDISPENSER789REF.910.481910.411CONTENS0,4 x 2,5 x 750,5 x 3 x 750,6 x 3,5 x 1000,8 x 4 x 1001 x 5,5 x 1251,2 x 6,5 x 150PH-2x25ContentsEmptyNº Pc: 152Nº Pcs.8888766PH-0x 75PH-1x 100PH-2x 125PH-3x 150T-10 x 75T-15 x 100T-20 x 100T-25 x 125T-30 x 150Sizes (mm.)775 x 450 x 250775 x 450 x 250Nº Pcs.8766877760,8 x 4 x1001 x 5,5 x1251,2 x 6,5 x1501,6 x 8 x1751,6 x 10 x2001,2 x 6,5 x25Nº Pcs.876666REF.910.341910.471ContentsPhillips PHPhillips PHPhillips PHPhillips PHPozidriv PZPozidriv PZPozidriv PZTorx®Torx®Torx®Torx®Torx®Torx®StubbyStubbyEngineers’Engineers’Engineers’Engineers’ElectriciansElectriciansElectriciansElectriciansElectricians+ Shelf 75 cm.N.º Pcs.Empty144L x A750 x 300750 x 300size0 x 751 x 1002 x 1253 x 1500 x 751 x 1002 x 12510 x 7515 x 10020 x 10025 x 12527 x 12530 x 1502 x 251,2 x 6,5 x 250,5x 3 x 750,8x 4 x1000,8x 5,5 x1251 x 6,5 x1500,8x 4 x1001 x 5,5 x1251,2x 6,5 x1501,6x 8 x1751,6x 8 x1751,6x 10 x200pcs.6666666666666666666666661011121314267

1PLIER DISPENSER234LAIREF.N.º Pcs.L x A x lREF.N.º Pcs.L x A x l56910.88130470 x 300 x 210Contents5 Conbination pliers 180 mm. black finish 602.4215 Conbination pliers 180 mm. black finish 601.4215 Conbination pliers 200 mm. black finish 602.4315 Diagoned cutting pliers 160 mm. black finish 624.0915 High leverage diagoned cutting pliers 180 mm. black finish 625.5515 High leverage diagoned cutting pliers 200 mm. black finish 625.561910.891REF.30750 x 300 x 210Dotación5 Combination pliers 180 mm. pavon 602.4715 Combination pliers 180 mm. pavon 601.4715 Diagonal cutting pliers 200 mm. pavon 601.4815 Diagonal cutting pliers 160 mm. pavon 624.1915 High leverage diagonal cutting pliers 180 mm.pavon 625.6515 High leverage diagonal cutting pliers 200 mm. 625.661910.181Empty78BIT DISPENSER 1/4”910REF.910.641910.651DescriptionDispenser with toolsEmptyDimensions (mm.)340 x 300 x 250u.1Contens11121314The dispenser has additional spaces to put sizes that are notincluded in the contents."Torx® is a registered trademark of Camcar Division of Textron Inc."0,5 x 40,6 x 4,50,8 x 5,51 x 61,2 x 6,51,6 x 8PH-1PH-2PH-30,5 x 40,6 x 4,50,8 x 5,51 x 61,2 x 6,525 mm25 mm25 mm25 mm25 mm25 mm25 mm25 mm25 mm50 mm50 mm50 mm50 mm50 mmNº Pcs. Nº Pcs. Nº Pcs.1010101010101010101010101010PZ-1PZ-2PZ-33456PH-1PH-2PH-325 mm25 mm25 mm25 mm25 mm25 mm25 mm50 mm50 mm50 mm10101010101010101010T-10T-15T-20T-25T-27T-30T-40PZ-1PZ-2PZ-325 mm25 mm25 mm25 mm25 mm25 mm25 mm50 mm50 mm50 mm10101010101010101010268

BOLT CUTTERDISPENSERUNIVERSALPULLER DISPENSER 1234DISPENSERREF.910.061910.751Nº Pcs.17ContentsEmpty dispenser, 500 x 300 x 175Dispenser with tools2 boltcutters 470-1 ref. 651.1112 boltcutters 630-2 ref. 651.1212 boltcutters 750-3 ref. 651.1311 boltcutter 900-4 ref. 651.141BENCH VICE DISPENSERkg.3,527,5REF.910.051910.821Nº Pcs.16ContentsEmpty dispenser 440 x 300 x 630Dispenser with tools1 Nº 1 80 x 100 REF.701.01111111Nº 11Nº 2Nº 21Nº 3Nº 31120 x 100 REF.701.021160 x 150 REF.701.031200 x 150 REF.701.041250 x 200 REF.701.051350 x 200 REF.701.061kg.52756789101112REF.kg.EMPTY DISPENSER13910.021Capacity: 4 vices (Round or square guide)Size: 400 x 400 x 1.5705,614269

1TOOL PRESENTATIONS2CL CLCLCL CL CL3456Heavy duty adjustable wrenchCombination wrench1/2” SocketsREF.DescriptionPresentREF.DescriptionPresentREF. Description Present.78910111213001.035001.045001.055Adjustable wrench005.025005.035005.045Open end wrench010.015010.035010.055010.075010.095010.125010.145010.175010.185010.205010.215010.225010.255Offset ring wrench015.015015.035015.055015.075015.095015.125015.145015.175015.205015.225015.245015.2551/25/83/46"8"10"6- 78- 910-1112-1314-1516-1718-1920-2221-2324-2624-2725-2830-326- 78- 910-1112-1314-1516-1718-1920-2224-2625-2827-2930-32CLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCL025.065025.075025.085025.095025.105025.115025.125025.135025.145025.155025.165025.175025.185025.195025.205025.215025.225Forged double end socket wrenches055.015055.035055.055055.075055.095055.125055.175055.185Oil filter wrench060.015 65-110CL1/4” Sockets101.085101.105101.1356789101112131415161718192021226-78-910-1112-1314-1516-1720-2221-23HEX. 8HEX. 10HEX. 13CLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCL1/4” Accessories105.015 50 CL121.115121.125121.135121.145121.155121.165121.175121.185121.195121.205121.215121.225121.235121.245121.275121.305121.3251/2” Accessories125.015125.025125.085125.255125.655Combination plier601.475601.485Flat nose plier604.145604.165125250--1/2 - 3 /8140 pvc160 pvcCLCLCLCLCLCLCLSnipe nose plier, straight jaws612.265 160 ergo. CLWaterpump plier634.025634.105Knife664.185HEX. 11HEX. 12HEX. 13HEX. 14HEX. 15HEX. 16HEX. 17HEX. 18HEX. 19HEX. 20HEX. 21HEX. 22HEX. 23HEX. 24HEX. 27HEX. 30HEX. 32180 ergo.200 ergo.250 pvc250 pvc200CLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLCLGauges14981.415W-M 52 P.CL270

1234567891011121314271

GUARANTEE1.2.3.4.5.All hand tools in the catalogue are offered with a lifetime warranty; a warranty against material and manufacturing defects for the normal lifetimeof the tool in question. “Lifetime” is defined as the period of time a tool can be expected to last under normal use and conditions.SNA Europe's range of power tools, pneumatic tools and measuring tools are excluded from point 1 and each has a separate warranty cardsupplied with the product covering the specific warranty conditions. Products are designed and manufactured for professional use. The warrantyperiod is one year (12 months) for professional use and two years (24 months) for private use. The warranty period starts on the purchase date.This date may be verified with the invoice or any other document of legal value.Defective product will be repaired, replaced or substituted. SNA Europe does not provide for the transportation cost for repaired, replaced orsubstituted product.Any product that has been incorrectly used and/or maintained or that is worn from improper use or that has suffered unauthorized modificationsis not covered by this warranty.A warranty claim must be submitted within the warranty period. This requires the submission or shipment of the complete tool in question withverification of sale documentation, which must validate the purchase date and the product designation, to the retailer or distributor.6.Replacement or repair of the product will be carried out as quickly as possible. At the reception of the replaced or repaired product the customeris asked to validate conformity. Replacements and repairs provided under the warranty do not lengthen or renew the warranty period for the tool.272