Multiprocess <strong>MIG</strong>/<strong>MAG</strong> <strong>pulse</strong> <strong>welding</strong> <strong>machines</strong>Pi<strong>co</strong>mig/Phoenix/Phoenix Car Expert • Options/accessoriesOptions/accessoriesWire feed unitsIntermediate drive unitIntermediate hose package, 7-polePhoenix Progress drive 4Wire feeder, water, Euro torch <strong>co</strong>nnector4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresSpool diameter up to 300 mmPhoenix Progress drive 4 HSWire feeder for high performance <strong>welding</strong>Can only be used on Phoenix 551 Progress4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresSpool diameter up to 300 mmPhoenix Progress drive 4LWire feeder, water, Euro torch <strong>co</strong>nnector4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresSpool diameter up to 300 mmPhoenix Progress drive 300CWire feeder, water, Euro torch <strong>co</strong>nnectorAdjustment of the gas quantity directly on the wirefeed unit4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresSpool diameter up to 300 mmPhoenix Progress drive 200CWire feeder, water, Euro torch <strong>co</strong>nnectorAdjustment of the gas quantity directly on the wirefeed unit4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresSpool diameter up to 200 mmPhoenix Progress drive 4DDouble wire feederTwo <strong>welding</strong> tasks with just one power source foralternating <strong>welding</strong> of root and final passes, solidand flux <strong>co</strong>red wire, or a variety of materials andwire thicknessesThe torch trigger is used for changeover betweenthe wire feeds; no special torch or changeover onthe machine required!4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresSpool diameter up to 300 mmNo changing of rollers, no torch <strong>co</strong>nversion required,changeover times are greatly reducedu Can be operated with the Phoenix Progresspuls D series only!M drive 4Z WWire feed intermediate drive, water, steel4-roller wire feed equipped for 1.0 mm + 1.2 mmsteel wiresu Special intermediate hose package availableon request!u Especially for alpha Q, Phoenix Progress,Phoenix Expert and Taurus Synergic S. Notsuitable for high-speed <strong>welding</strong>!<strong>MIG</strong> G 7POL 70MM²Intermediate hose package, gas-<strong>co</strong>oled, 7-poleIntermediate hose package, 7-poleIntermediate hose packages, 19-poleTorchesFunction torch 19-poleGouging<strong>MIG</strong> W 7POL 70MM²Intermediate hose package, water-<strong>co</strong>oled, 7-pole<strong>MIG</strong> W 19POL 70MM²Intermediate hose package, water-<strong>co</strong>oled, 19-poleMT series EZA<strong>MIG</strong>/<strong>MAG</strong> <strong>welding</strong> torch, gas-<strong>co</strong>oledEquipped for 1.2 mm <strong>welding</strong> wireMT451W F EZA M9<strong>MIG</strong>/<strong>MAG</strong> <strong>welding</strong> torch, water-<strong>co</strong>oled, fumeextractionEquipped for 1.2 mm <strong>welding</strong> wireTIG 150 GD 1T EZA 4MTIG <strong>welding</strong> torch, Euro torch <strong>co</strong>nnectorMT series U/D<strong>MIG</strong>/<strong>MAG</strong> <strong>welding</strong> torch, 1 x up/down, water<strong>co</strong>oledEquipped for 1.2 mm <strong>welding</strong> wireMT series 2U/D<strong>MIG</strong>/<strong>MAG</strong> <strong>welding</strong> torch, 2x up/down, water-<strong>co</strong>oledEquipped for 1.2 mm <strong>welding</strong> wireMT series PC1<strong>MIG</strong>/<strong>MAG</strong> <strong>welding</strong> torch, Power<strong>co</strong>ntrol 1, water<strong>co</strong>oledEquipped for 1.2 mm <strong>welding</strong> wireu Not possible in <strong>co</strong>mbination with PhoenixExpert drive 4/4L M3.00!MT series PC2<strong>MIG</strong>/<strong>MAG</strong> <strong>welding</strong> torch, Power<strong>co</strong>ntrol 2, water<strong>co</strong>oledEquipped for 1.2 mm <strong>welding</strong> wireu Not possible in <strong>co</strong>mbination with PhoenixExpert drive 4/4L M3.00!GT 600 SKK95 3Gouging torchAir arc gouging torch for separating metalsu Suitable carbon electrodes can be found inthe Accessories section of the price list!56EWM HIGHTEC WELDING GmbHTel.: +49 2680 181-0, Fax.: -244
Multiprocess <strong>MIG</strong>/<strong>MAG</strong> <strong>pulse</strong> <strong>welding</strong> <strong>machines</strong>Pi<strong>co</strong>mig/Phoenix/Phoenix Car Expert • Options/accessoriesRemote <strong>co</strong>ntrolsR10 19POLRemote <strong>co</strong>ntrol, wire speed setting, <strong>welding</strong> voltage<strong>co</strong>rrectionRobust metal casing with rubber feet, retaining clipand holding magnet, 19-pole <strong>co</strong>nnection socketFor alpha Q, Phoenix, Taurus Synergic and TaurusSynergic SRG10 19POLRemote <strong>co</strong>ntrol to set the wire speed and <strong>welding</strong>voltagePlastic casing with retaining clip, 19-pole <strong>co</strong>nnectionsocketLight, robust and <strong>co</strong>nvenientVoltage <strong>co</strong>rrection from -10 V to +10 VInfinitely variable setting of wire-feed speed(0.5–24 m/min)With pre-fitted 5-m <strong>co</strong>nnection cableFor alpha Q, Phoenix, Taurus Synergic and TaurusSynergic S machine seriesR20 19POLRemote <strong>co</strong>ntrol, program switchingRobust metal casing with rubber feet, retaining clipand holding magnet, 19-pole <strong>co</strong>nnection socketChangeover and display of up to ten <strong>welding</strong>programmesFor alpha Q, Phoenix Progress, Phoenix Expert (notin <strong>co</strong>mbination with Phoenix Expert Drive M3.00)as well as Taurus Synergic SR40 7POLRemote <strong>co</strong>ntrol, 16 programsRobust metal casing with rubber feet, retaining clipand holding magnet, 7-pole <strong>co</strong>nnection socketSwitch between <strong>MIG</strong> standard <strong>welding</strong> and <strong>pulse</strong>darc <strong>welding</strong>For alpha Q, Phoenix Progress, Phoenix Expert andTaurus Synergic Su Cannot be used with double or two separatewire feed units!Cooling unitsTransport carts<strong>co</strong>ol50 U40Air <strong>co</strong>oling unit with centrifugal pumpModular design, tool-free assemblyTrolly 35-1Transport cartsFor Pi<strong>co</strong>mig 180, Pi<strong>co</strong>tig 180/180 MV, Tetrix 180 andPi<strong>co</strong> 180For transporting a power source and a gas cylinderTrolly 55-2Transport cartsFor transporting a power source, a <strong>co</strong>oling unit anda gas cylinderFor Tetrix 230, 270 DC, Tetrix 230 AC/DC, as well asPhoenix and Taurus 335EWM HIGHTEC WELDING GmbHTel.: +49 2680 181-0, Fax.: -24457