Arctic Cat M8 Pump Gas Turbo Install Instructions - Boondocker
Arctic Cat M8 Pump Gas Turbo Install Instructions - Boondocker
Arctic Cat M8 Pump Gas Turbo Install Instructions - Boondocker
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Important Information Before <strong>Install</strong>ing This System:<br />
The 2010 <strong>M8</strong> will require a head modification to run pump gas call <strong>Boondocker</strong> for more<br />
information.<br />
Before you begin your turbo install, read through these instructions to determine if you are<br />
comfortable installing this system. If not please take it to an experienced mechanic for your<br />
install. It is also a good idea to check the kit contents to verify all parts were provided in the kit<br />
before getting started. This install requires time and patience. Do not rush the installation, if you<br />
have any questions on your installation please contact <strong>Boondocker</strong> tech support at 1-877-522-<br />
7805.<br />
Step 1: Tear Down<br />
Parts Needed: Tools Needed:<br />
None Basic tool set<br />
Air saw<br />
A. Remove hood and side panels<br />
B. Remove pipe and can (remove the<br />
stock rubber mount from the exhaust<br />
can we will need this later).<br />
<strong>Boondocker</strong> Performance www.boondockers.com 208-542-4411 2010 <strong>M8</strong> <strong>Turbo</strong> Kit <strong>Instructions</strong> 2