Tank Lids - Sprayer Specialties, Inc.

Tank LidsPart# Description PriceNORLID5 5” Screw-On Lid w/ Ball Check $24.74NORLID7 7” 1/4 Turn Lid (Not Shown) $62.81NORLID8 8” Vented Lid Only $28.45NORLID8-FWR 8” Vented Lid w/ Ring $38.24NORLID-FWR-6 16” Lid w/ 6” Inner Lid & Ring $68.90NORLID16-6 16” Lid w/ 6” Inner Lid $60.58NORLID6 6” Inner Lid, Vented for 16” $21.64NORLID16-VNT 16” New Style Lid w/ Center Vent $62.18NORLID16 16” Lid Only, No Vent $49.78NORFWR8 8” Ring Only $11.60NORFWR16 16” Ring Only $20.10SOLAR LIDS & FILLWELL RINGSPart# Description PriceSOLLID10NS 10” Screw In Style $52.56SOLFWR10NS 10” New Style Ring $49.18SOLLID5 5” Screw on Lid $31.44 5” LidACE TANK LIDS & FILLWELL RINGSPart# Description PriceACELID5 5” Screw On Lid $31.44ACELID12 12” Screw In Lid $50.78ACELID16-6 16” Screw In Lid w/ 6” Inner Lid $63.91ACELID6 6” Inner Lid Only $22.16MISC. LIDS & FILLWELL RINGSPart# Description PriceRAVLID5 5” Raven Lid $32.88RAVFWR5 5” Raven Lid Ring $23.90RAVLID10NS 10” Raven Lid Screw-In Style $52.56RAVFWR10NS 10” Raven Lid Ring $49.18SNYLID11 11” Snyder Lid 1/4 Turn $56.9216” Hinged, Locking Tank LidStandard on Sprayer SpecialtiesVLU & XLRD Trailer SprayersPart# Description PriceLOCKLID16 16” Locking Lid w/ Fillwell Ring $198.51LL16GSK1 Gasket for Under Fillwell Ring $22.44LL16GSK2 Gasket for Lid $22.44BASKET STRAINERSPart# Size Mesh Price9950-08240 8” 18 $24.469950-12240 12” 18 $28.849950-16180 16” 18 $30.39HIGH CAPACITY EDUCTORSPart# Description Price38HCE 3/8” MPT Eductor $48.4912HCE 1/2” MPT Eductor $29.2834HCE 3/4” MPT Eductor $59.64150HCE 1 1/2” MPT Eductor $152.64VENT CAPSPart# Description PriceVC-100 1” MPT Poly Vent $10.49VC-200 2” MPT Poly Vent $24.29VC-230 2” MPT Poly Vent w/ 30 Mesh Screen $38.33TANK COMPONENTS 21316” Lid w/ Vent16” Lid w/ 6” Inner LidList PricePlease Apply DiscountRef# Part# Description PriceALL AGDU Complete Agitator Assembly $56.841 AG (1) Agitator $9.592 AGTL Agitator Tee Long (Includes Ref# 3 & 4) $10.753 AGTS Agitator Tee Short $5.494 AGEX Agitator Extension $5.065 AGCOMB 2” Adapter $22.736A AGEL12 Agitator Elbow x 1/2” Hose Barb $3.226B AGEL58 Agitator Elbow x 5/8” Hose Barb $3.226C AGEL34 Agitator Elbow x 3/4” Hose Barb $3.22Grimes, IA - (800) 351-1587 213Olathe, KS - (877) 829-85028” LidBaffle SpheresAgitator Assemblies5” LidPart#PriceBS-16 $29.261-AG 4-AGEX 3-AGTS 6-AGELShut Off ValveThe Hudson Valve is designed to maintain a constant levelof water. Once attached to your water source, it will turn onand off as needed. This valve takes the place of daily handwatering and monitoring. Available in 1/2” & 1” inlet.Part# Description PriceV-S 1/2” Inlet Shut Off Valve $73.15V 1” Inlet Shut Off Valve $82.15Tank Rinse NozzlesPart# Description PriceTRB-100 1” FPT Tank Rinse Nozzle 360 o $104.40Coverage, 3 GPM at 50 psi, 300Max PSI, Made of High Impact nylonPart# Description PriceD41892-1/2-POM-6 TeeJet Tank Rinsing $193.56Nozzle, 1/2” NPT Ports,115 Max PSITANK COMPONENTS

SEPTIC & CISTERN TANKS214TANKSBelow Ground Septic & Cistern TanksSeptic TanksAce Roto-Mold septic tanks are stronger, easier to install and less costly than old-fashioned concrete septic tanks - yet theystill offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, AceRoto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. The 1000, 1250 and 1500gallon double-compartment septic tanks have been tested by NSF to meet the IAPMO Z1000 and CAN/CSA-B-66 standards.Each tank carries an individual serial code and is fully documented from the date of manufacture, Ace Roto-Mold septic tanksare designed and manufactured with rigourous quality controls. The trapezoidal deep-rib design and interior baffle systemmake Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extrudedNitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties,eliminating the need for metal fasterners that can corrode and fail. Ace’s unique tank baffle system slows the flow of wastewaterand directs it to the middle of the tank so wastewater can seperate from solids. An outlet baffles allow the partially treatedliquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation.Septic tanks are available in one-compartment and two-compartment designs and are manufactured forcontainment of liquids up to 1.7 specific gravity.SEPTIC TANKSPart# Description Weight Dimensions PriceAST-0300 300 Gallon Pump Tank 134 54 x 56 $842.38AST-750-1 750 Gallon - 1 Compartment 259 60 x 70 x 60 $1463.12AST-1000-1 1000 Gallon - 1 Compartment 390 60 x 101 x 60 $2039.37AST-1000-2 1000 Gallon - 2 Compartment 436 60 x 101 x 60 $2355.75AST-1250-2 1250 Gallon - 2 Compartment 489 58 x 118 x 72 $2670.05AST-1500-1 1500 Gallon - 1 Compartment 528 58 x 137 x 72 $2755.63AST-1500-2 1500 Gallon - 2 Compartment 574 58 x 137 x 72 $3095.73*Neither Sprayer Specialties, Inc. nor the tank manufacturer(s) accept responsibility for lost or damaged product dueto the failure of any of the tank(s), tank fitting(s), tank valve(s) or the installation of the for mentioned items.SEPTIC TANK ACCESSORIESPart# Description PriceAST19212 16” Access Extension Assembly, Black $146.86AST19211 24” Access Cover, Black $103.50AST19257 8” Riser & Lid, Black $153.24AST10078 4” Sanitary Gasket $12.36AST10084 4” Schedule 40 Gasket $11.95AST19256 4” Gasket Retainer / Hardware $10.57AST18000-XX Internal Plumbing Kit (xx-State Specific) $179.85Cistern TanksAce Roto-Mold cistern tanks are intended for bulk storage or collection of potable water and designed for below groundlevel installations. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal,deep rib design. Only Ace tanks feature a custom molded gasket in the lid. Manufactured from extruded Nitrile rubber,the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties,eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved forpotable water and are manufactured for containment of liquids up to 1.7 specific gravity.CISTERN TANKSPart# Description Weight Dimensions PriceAST-0325-1W 325 Gallon w/ 1 Access Cover 134 54 x 56 $866.62AST-0850-1W 850 Gallon w/ 1 Access Cover 259 60 x 70 x 60 $1518.30AST-1150-1W 1150 Gallon w/ 1 Access Cover 414 60 x 101 x 60 $2108.44AST-1450-1W 1450 Gallon w/ 1 Access Cover 473 58 x 118 x 72 $2392.27AST-1700-1W 1700 Gallon w/ 1 Access Cover 567 58 x 137 x 72 $2824.98List PricePlease Apply DiscountCISTERN TANK ACCESSORIESPart# Description PriceAST19214 16” Access Assembly, White $188.20AST19213 24” Access Cover, White $117.39AST19258 8” Riser and Lid, White $153.24Grimes, IA - (800) 351-1587 214Olathe, KS - (877) 829-8502