Anti Vibration Mount Brochure (PDF Format) - M Barnwell Services Ltd

ContentsA, B, C, D, E - Cylindrical Mounts 5These standard mounts are suitable for most applications. They are widely used for verylight equipment as well as heavy machinery. Various sizes and variants are available.AD - Shear and Compression Mount 51Typically used to isolate vibration from electronic control units that are fitted tomachinery, the shear mount has superior performance compared to standard mounts,offering isolation from both transit shock and vibration.AMV - Angle Mount 53The angle mount is designed to withstand load in shear and compression that act atthe focal point of machinery. This mount gives low roll frequency and offers excellentvibration isolation on light portable equipment.AH - Hexagonal Mount 54The major advantage of the hexagonal mount over standard mounts is its hexagonal plates,which allow the mount to be held during installation, reducing torsional stress on the rubber.O - Low Frequency Mount 55This is a unique mount, often used to mount light medical pumps,small electric motors and cameras.DS & ES - Concave Buffers 56These cylindrical buffers are extensively used as secondary feet to isolate vibration on portablemachinery. They are available in both male and female type to suit different applications.DD & ED - Cylindrical Buffers 57Also known as spring mounts, their key feature is their linear and non-linear deflection toabsorb higher impact load energy.DP & EP - Parabolic Buffers 58Also known as spring mounts, their key feature is their linear and non-linear deflection toabsorb higher impact load energy.CP - Clamp Mount 60Also known as spring mounts, their key feature is their linear and non-linear deflection toabsorb higher impact load energy.DM - Buffers 61This is a low cost rubber spring mount typically used as a hard stop to absorb shock.1