Full details for Landustrie surface aerator

S URFACEA ERATION

S URFACEA ERATIONINTRODUCTIONThis brochure gives an overview of the activitiesof Landustrie Sneek BV in the field of surfaceaeration. Landustrie has a long history andbroad experience in this field. For almost half acentury Landustrie has designed, manufactured,supplied, installed and maintained many types ofaeration system. Since the introduction of a fullscale aeration test tank and the availability ofprocess know-how, back in the mid eighties,Landustrie is the market leader in surfaceaeration. This scientific approach has resultedin the successful introduction of the Landy-7,the fourth generation slow speed surfaceaerator, which can easily compete with all otheraeration systems on the market. The Landy-7is in itself complete proof of Landustrie’sleading position in this market.HIGH AND CONSTANT EFFICIENCYThe efficiencies that can be obtained with slowspeed surface aerators depend on a numberof factors. It is important to be aware of this,particularly when comparing slow speed aeratorswith other aeration systems. An importantadvantage of the surface aerator is that theefficiency will be constant over the full lifetime ofthe aerator, often up to 30 years. One importantfactor is the geometry of the basin in which theaerator will be installed. For different applicationsone can use, as a rule of thumb, the followingdata:-oxidation ditches 2.2 -2.5 kg O2/kWhrectangular basins 1.8 – 3.3 kg O2/kWhlagoonsup to 2.0 kg O2/kWhA second consideration is the influence of the-factor. For slow speed surface aerators this isnormally about 0.9.This is a general scientificallyaccepted value. Particularly with fine bubbleaeration systems -factors are often assumedwhich can only be met at laboratory scale.Moreover, often no consideration is given to thecomposition of the waste water, which can havea detrimental influence on the function of theinstalled aerator.Because of the character of the slow speedsurface aerator it is impossible to avoid splashingof the waste water. The strength of a wellLANDY-7The Landy-7 is characterized by the followingfeatures:high and constant efficiencyextreme low reaction forcesexcellent mixing qualitiessimply regulatedwide oxygenation rangewide range of applicationssimple and robust constructionself cleaninglow maintenance costsoxygenation capacity [kg 02/kWh]comparing surface aeration/fine bubble aerationinvestments new elementstimeLANDY-7fine bubble aerationdesigned aerator is that oxygen transfer isachieved with a controlled splash pattern.This is another area in which the Landy-7distinguishes itself from other designs. If furtherrestrictions are in place regarding splashing ornoise production then Landustrie can supplyspecially designed aero caps (see photographof Stora Enso, Sweden).

S URFACEA ERATIONFloating arrangementOxidation ditchForces according FEAWIDE RANGE OF APPLICATIONSNaturally, the Landy-7 can be installed in eithera fixed or a floating arrangement. Regardingthe geometry of the basins the options arevirtually unlimited; square or rectangulartanks, round tanks, shallow or deep tanks(if necessary with suction tubes) oxidationditches, MBR- and SBR-systems, lagoons,ponds, mixing or buffer tanks. The Landy-7can be applied anywhere and still maintain itshigh efficiency.The floatinginstallationarrangement hasbeen newlydesigned byLandustrie.It is a more compactinstallation whichis not only morestable underoperating conditions,Square tanks but also mucheasier to balancedue to the reversed pyramidconstruction. Anotheradvantage is that the floatingunit can be manufacturedlocally, allowing the use ofless expensive local materials.SIMPLE AND ROBUSTCONSTRUCTIONThe starting point of the design of the Landy-7was not only that the available power had tolead to a higher oxygen transfer, but also thatthe aerator had to be easy to manufactureand thereforecheaper. This is true for both the steel epoxycoated option and the stainless steel optionin AISI 304 and AISI 316. The applied forcesgenerated in the Landy-7 are very low. Thiscan be proved by using Finite Element Analysismethods in the Landy-7 design. For biggerdiameter Landy-7 aerators an intermediateflange can be supplied in order to reducetransport costs.SELF CLEANINGThe design and the shape of the blades isconfigured in such a way that it is impossiblefor any rag or other detritus to attach to theimpellor. This is largely due to the virtual coneshape created by the seven blades.LOW MAINTENANCE COSTSBecause the complete surface aerator unit issimply built up from impellor, gearbox andelectric motor, maintenance is limited to ayearly oil check and periodical checking of allgreasing points.Low maintenance

WIDE OXYGENATION RANGEDepending on the specific circumstances it ispossible that one single Landy-7 can transfer1 to 500 kg O2/h into the waste water.In any specific Landy-7 aerator, the range ofoxygen transfer is very large. The efficiency ofthe surface aerator is constant over a widerange of both speed and submergence.INDUSTRYAn important application for Landy slow speedsurface aerators is in the pulp and paperindustry. Whether the Landy-7 is installed inthe classic aeration tank or after an anaerobicbioreactor, in both cases the Landy-7 is up tothe job.Oxygen transfer LANDY-7 surface aeratorOC(10) [kg 02/hr]diameter LANDY-7 [cm]Stora Enso, SwedenSIMPLY REGULATEDThe selection of the size of the surface aerator isprimary based on the amount of oxygen whichhas to be introduced into the water.The oxygen capacity of the selected Landy-7 canbe regulated in two ways, either by regulating thespeed by means of a variable frequency drive(VFD), or by a pole-changeable electrical motor.Alternatively, this regulation can be achieved byvariation of the degree of submergence of thesurface aerator, normally achieved by changingthe height of the overflow weir. The actualregulation is nearly always monitored by means ofan oxygen probe.REFERENCESFor half a century Landustrie has been involvedin aeration projects, and many prestigiousreferences have been achieved. In this brochurewe restrict ourselves to some more recentexamples of the over 5000 units suppliedworld-wide.

REFERENCESShanghai, ChinaBeetham, Trinidad & TobagoBASF, GermanyHamburg, GermanyVienna, AustriaAmersfoort, The Netherlands

LANDUSTRIE TEST FACILITIESSince the middle of the eighties Landustrie hashad the necessary facilities to undertake aeratortesting in their own full scale test tank. This tankis unique in Europe, and probably in the world,in terms of size and testing possibilities. Thedimensions are 20 * 20 * 6 m, creating aneffective volume of 2200 m 3 , at a water depth of5.5 m. In the tank a height adjustable bridge isinstalled in order to be able to simulate lowerwater depths.There is also the option of inserting extra wallsin the tank to reduce the volume.The standard drive-unit of the test installation isa 90 kW drive-unit provided with a variablefrequency drive (VFD). The foundation plate isflexibly mounted and provided with 4measurement probes using strain gauges, tomeasure the radial and axial forces. The rise inoxygen content is measured by 4 oxygenprobes. The measured value of the axial andradial forces, the torque and the oxygen contentis monitored by data loggers. In short, themonitoring is fully automatic.Apart from oxygen measurements, vibration,noise level and water flows can be measured.Oxygen measurements are undertaken inpotable water, corrected to standard conditions(T= 20 0 C en P0 = 1013 hPa) in compliance withthe ATV norms (ATV M209E).In this tank nearly all Landy-7 aerators aretested under different conditions. Landustrie istherefore capable of predicting the efficiencywhich can be expected under the givenconditions. Besides measurements forLandustrie’s own use, measurements for thirdparties can be carried out in the presence ofthe client.Landustrie test tank

A ERATIONR OTORSLANDY-700Pasveer oxidation ditchLANDY AERATION ROTORSThe Landy-700 is an upgrade of the well-knowncage rotor. The construction of the Landy-700 issimilar to the Landy-1000 type, however thediameter of the brush aerator is limited to700 mm.Normally the Landy aeration rotor is supplied asa package unit, complete with bridge rotor,bearings, drive-unit, splash guards and a bridge.This compact unit not only allows for a simplecivil engineering construction but also facilitatesa very simple installation procedure. When nobridge is supplied, the bearings are locateddirectly onto the civil construction.The Landy-700 has a diameter of 700 mm and isavailable up to a length of 9 m. The oxygenationcapacity is, under standard conditions,54 kg O2/h, at a rotor length of 9 m and anefficiency of 1.8 kg O2/kWh.For more than 50 years Landustrie has designed,manufactured, supplied and installed severaltypes of aeration rotors. Initially, the aeratorswere installed in the classical Pasveer oxidationditch, but later they were also applied in severalother configurations. Every Landy aeration rotorconsists of the following components;rotorbearingsdrive-unitsplash platesbafflesOptionally, Landy aeration rotors can be suppliedwith heated bearings, in order to avoid freezingduring cold weather, and splash covers for theavoidance of aerosols.DIFFERENT TYPESLandustrie has developed two standard types,the Landy-700 and the Landy-1000, both ofwhich have the following features;high efficiencyrobust and reliable constructionwide oxygenation capacity rangelow maintenance costslong lifelow exploitation costsDepending on specific requirements, it ispossible to supply other sizes of aeration rotors.Landy-700 prefabREGULATION OF OXYGENATIONFor regulation of the oxygenation capacity thereare two options:Variation of the rotational speed, effectedby a variable frequency drive (VFD) or apole-changeable electric motor.Variation of the immersion depth of theaerator, effected by overflow weirs.

LANDY-1000The Landy-1000 aeration rotor is the result ofrecent research and extensive testing.The Landy-1000 consists of a hollow seamlesssteel tube. Around the tube twelve blades areclamped in a star-shaped configuration. This isdone by means of bolted connections (notwelded). The width of the blades is 75 mm andthe star-shaped blades are slightly staggeredfrom one another. Thus, when rotating, not allthe blades will hit the water simultaneously, inorder to reduce the load on the bearings. Onboth ends of the tube splash plates are mountedto avoid splashing of the water onto thebearings. The Landy-1000 can also be suppliedwith a prefabricated bridge construction.The Landy-1000 has a diameter of 1000 mmand is available up to a length of 9 m.The oxygenation capacity under standardconditions is 85 kgO2/h, at a rotor length of 9 mand an efficiency of 2.0 kg O2/kWh.Landy-1000APPLICATIONSLandy aeration rotors can be installed in bothmunicipal and industrial waste water treatmentplants. Landustrie has also supplied Landyaeration rotors for use in potable waterinstallations.LANDY aeration rotor100 120 140 160 180 200 220 240 260 280 300Landy-1000 without bridgeLandy-700 with bridge

R ENTALA ERATORSRENTAL OF SURFACE AERATORSIn order to fulfill the growing demand fortemporary aeration installations, Landustrieoffers the hire of a floating Landy-7 slowspeed surface aerator. If requested the unitcan also be hired without the floatingconstruction.These rental aerators can be used during therebuild or renovation of existing waste watertreatment plant. Of course it is also possible toapply these units for additional aeration, for usein lagoons or pond aeration or for tests in whichone wants to compare different aerationsystems.PRICINGThe rental price comprises a weekly rental price,with separate costs for transport, assembling,dismantling and other options.New Landy floating constructionRENTAL SUPPLYa Landy-7 high efficiency slow speed surfaceaeratorquick deliveryassembling and dismantling of both theexisting and rental unit(s)optional supply of variable frequency drive(VFD)minimum rental period is one weekTECHNICAL DATA ON RENTALAERATORS*Motor power 37 kW 55 kWOxygenation capacity ± 80 kg O2/h ± 110 kg O2/hDiameter (Landy-7) 1800 mm 2000 mmPeripheral speed max. 5 m/s max. 5 m/sLandy rental aerator* On request other units might be available.Landustrie Sneek BVP.O. Box 199NL-8600 AD SneekThe NetherlandsWatertechnologyTel. +31 515 - 48 68 88Fax +31 515 - 41 23 98e-mail info@landustrie.nlwebsite www.landustrie.nlOffice address Pieter Zeemanstraat 6, Sneek01-2007-1500 ENG.