Q200/HE Hook-Up Guide for Holter - QRS Diagnostic
Q200/HE Hook-Up Guide for Holter - QRS Diagnostic
Q200/HE Hook-Up Guide for Holter - QRS Diagnostic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Q200</strong>/<strong>HE</strong> Quick-Start <strong>Guide</strong> <strong>for</strong> <strong>Holter</strong>To start recorder <strong>for</strong> <strong>Holter</strong>Step 1 Insert <strong>for</strong>matted SD Card (using <strong>Q200</strong> <strong>for</strong>mat) and battery into recorder.Step 2 Screen will display “<strong>Q200</strong>/<strong>HE</strong>” and “<strong>QRS</strong> <strong>Diagnostic</strong>” in<strong>for</strong>mation.* Press ENTER to continue to mainmenu. Erase memory if prompted to do so.Step 3 If desired, adjust Settings by using arrows – , and – to move the cursor and the ENTER buttonto select. Use arrows to navigate to General Settings menu and to adjust entries. Press ENTER toselect and return to menu.Step 4 From main menu go to New Patient screen to verify or enter Patient ID. At least one character mustbe entered <strong>for</strong> Patient ID.Step 5 Use arrows and ENTER to input ID and press EVENT when finished. (Hold down ENTER button tobackspace.) Recorder will now start automatically after 10 minutes or by pressing EVENT button <strong>for</strong>3 seconds. ECG signal and quality will appear on screen.Step 6 To remove card after recording, gently push inward to release. Never pull card out of slot, as it maydamage the recorder.*Note: If screen displays a 15 second countdown, you will need to interrupt by pressing ENTER,,, andEVENT buttons, in that order.MessagesLead Loose – Occurs when the patient is not hookedup or if there is a problem with the hook up. Theproblem may be with an electrode, a lead, or the cablethat connects the leads to the recorder. The messagewill continue to flash <strong>for</strong> about 10 seconds aftercorrected. When corrected, the ECG, then Time-of-daywill appear on the screen. If you choose, you can turnthis error message off via the main menu.Battery LOW or FAILURE – Put in new battery be<strong>for</strong>estarting recorder.Erase memory YES/NO – If the SD card has beenused <strong>for</strong> a previous patient, you will need to erase now.If the card should not be erased as it has ECG data thatyou do not want to lose, you will need to removeit and put in a new <strong>for</strong>matted SD card.SD Card errors – SD Cards must be <strong>for</strong>matted usingyour LX <strong>Holter</strong> software. Refer to your Operator’sManual <strong>for</strong> details on SD Card errors and how to <strong>for</strong>matand correct.General SettingsContrast Adjusts LCD screen contrastLead Loose Enables/Disables “Lead Loose”error messageEvent Marker Denotes event location on ECGKey Mode “Quiet” turns off key beeping.“Delayed” prevents accidental eventsby requiring patient to hold buttondown <strong>for</strong> several seconds to record aneventRec Type Switch between <strong>Holter</strong> and Event onlyrecording modes.Menu LockLanguageHi ResLocks settings on the recorderTo lock recorder enter “217”To unlock the recorder enter “151”Choose from multiple languagesEnables/Disables high resolutionrecording (<strong>Holter</strong> only.)<strong>QRS</strong> <strong>Diagnostic</strong>6901 E. Fish Lake Road, Suite 188Maple Grove, MN, USA 55369800.465.8408 | +1.763.559.8492 | Fax +1.763.559.2961info@<strong>QRS</strong>diagnostic.com | www.<strong>QRS</strong>diagnostic.comRelease Date: 04/12Advena Ltd33 Bridge St.Here<strong>for</strong>d HR4 9DQUK600005-00A0086© <strong>QRS</strong>
Change language