Lasting Jack Do It Yourself

Jack Stand - Instructions for UseAdjustable PinCan be adjusted by screwingin or out to fit any heel heightof shoe or boot last.Sculptured Toe Restwith Leather PaddingWhen properly adjusted the toewill rest gently on the leather pad.For very soft leather shoes youmay want to use a soft cottoncloth for extra protection on theleather pad.Rubber Band SpringTension spring made with car tireinner tube, easily replaceable.Adjust the tension by moving theband up or down.Foot Rest BaseFor holding the jack stand inplace while you work withyour hands free.Floor Mounting Holes4 pre-drilled holes on the base formounting to the floor or largerpedestal base.Carriage Bolt Pivot5/8” x 8” long carriage boltStep 1 : Place your foot on the“Foot Rest” and pull back on themovable post.Step 2 : Align the “Adjustable Pin”with the thimble in the heel of the last.Step 3 : Place the “Adjustable Pin”into the thimble of the last. Be surethe last goes all the way down on pin.Step 4 : Rest the toe of the last onthe leather pad and release the springloaded post. Adjust for a snug fit.© Copyright June 2011 ShoeSchool. All Rights Reserved.PAGE 2