Lowell Custom Installation Racks and Power - OffGridGraphics.com

YÜxxáàtÇw|ÇzFloor cabinets and racks are perfect for largehome theater, boardroom, and whole-houseelectronic distribution systems wherecentralized control and security is desired.jxÄwxw Vtu|Çxàá \ÇvÄâwxMWÉÉÜáShown with optional solid,perforated or plexiglas front door.Ask for L2150 Series.f|wxáOptional lift offconvenienceand lock-downsecurity. Flush rear door with vents and lock. Adjustable/reversible mounting rails(see below) with printed RU increments. Solid top panels fit flush in top rails. Removable knockout panels above.and below rear door for easy wiring. PilotPoint TM panel hardware (10-32). Durable and fingerprint resistantpowder paint finish in wrinkle black.Accessorize with front doors, bases & fans!jxÄwxw etv~á \ÇvÄâwxM Flush rear door with vents and lock. Adjustable/reversible mounting rails(see below) with printed RU increments. Solid top panels fit flush in top rails. Removable knockout panels aboveand below rear door for easy wiring. PilotPoint TM panel hardware (10-32). Durable and fingerprint resistantpowder paint finish in wrinkle black.Accessorize with front doors, bases, sides & fans!UtáxáOptional bases provide mobility or abottom mounting surface.MB SeriesPB SeriesPBS SeriesMobile platformStationary platformShallow platform22”D 27”D Mounting Overall OverallModel* Model* Height Height Width(55.9cm) (68.6cm) rack unit, inches (cm) inches (cm) inches (cm)L265-77 L267-77 44RU, 77.125 (195.9) 83.125 (211.1) 23.062 (58.6)L265-70 L267-70 40RU, 70.125 (178.1) 76.125 (193.4) 23.062 (58.6)L265-61 L267-61 35RU, 61.375 (155.9) 67.375 (171.1) 23.062 (58.6)L265-42 L267-42 24RU, 42.125 (107) 48.125 (122.2) 23.062 (58.6)L265-36 L267-36 21RU, 36.875 (93.7) 42.875 (108.9) 23.062 (58.6)*For deeper installations 32”D L268 Series is also available.27”D 32”D Mounting Overall OverallModel* Model* Height Height Width(68.6cm) (81.2cm) rack unit, inches (cm) inches (cm) inches (cm)L277-77 L278-77 44RU, 77.125 (195.9) 83.125 (211.1) 23.062 (58.6)L277-70 L278-70 40RU, 70.125 (178.1) 76.125 (193.4) 23.062 (58.6)L277-61 L278-61 35RU, 61.375 (155.9) 67.375 (171.1) 23.062 (58.6)L277-42 24RU, 42.125 (107) 48.125 (122.2) 23.062 (58.6)*For shallower or deeper installations; see 22”D L275 Series or 36”D L279 Series.exäxÜá|uÄx et|ÄáModels include Lowell’sunique 2-sided rails with 10-32threaded holes on one side andsquare punched holes on theother. Simply reverse the railsfor installations that require cage nuts and a mixture of10-32, 12-24 or 6mm hardware. Printed RU incrementsmake installation easy.100 Integram Drive, Pacific MO 63069 636-257-3400 www.lowellmfg.comG

VÜxwxÇétVersatile, low-height racks allow forbuilt-in mounting of electronics intocabinetry or under counters anddesks. They are the ideal solution formounting smaller or specializedsystem components.Uâ|Äw@|Ç@ÑÄtvx áçáàxÅM X Series Versatile frame system allows custom-height racks to easily be built. Ships unassembled for UPS delivery. 14-gauge US steel with self-clinching studs for fast assembly. Front and rear rackrail has threaded 10-32 mounting holes.X-1720 shown withRMK Series shelf withcustom fascia andblank panels.X-2820X2820 shownwith optionalexpansion kit andoptional mid rails.jxÄwxw TááxÅuÄçM LCR-2120.125”D Mounting Overall Overall Opt’l Opt’l HeightModel Height* Height Width Mid Rail Expansion Kit(51.1cm) rack unit, inches (cm) inches (cm) inches (cm)X-1720 10RU, 17.5 (44.4) 17.687 (44.9) 19.25 (48.6) XRR-17 XK 1720 (+17.5”) or XK2820 (+28”)X-2820 16RU, 28 (71.1) 28.187 (71.6) 19.25 (48.6) XRR-17 XK 1720 (+17.5”) or XK2820 (+28”)*This is maximum mounting height with front and rear 1RU vent panels replaced by equipment.Rugged welded frame ships ready to install.14-gauge US steel top and bottom.11 gauge front and rear rackrail has threaded 10-32 mounting holes.16”D Mounting Overall OverallModel Height Height Width(40.6cm) rack unit, inches (cm) inches (cm) inches (cm)LCR-21 12RU, 21.125 (53.7) 23 (58.4) 19.25 (48.9)eÉÄÄ|Çz âÇwxÜ wxá~ vtu|ÇxàM L45-21Fits under standard height counters & work surfaces.Sloped front with 12RU provides comfortable viewingof equipment from a seated position.Locking front door opens from the top and slides intobase for unobstructed access to equipment.Short, flush rear door with lock has 1RU wire access.Twin-wheel caster provide smooth operation oncarpets and floors.Covered device cut-outs above front door allowoptional use of low voltage decora-style devices.25.5”D Mounting Overall Overall Opt’l TopModel Height Height* Width (Laminate)(64.8cm) rack unit, inches (cm) inches (cm) inches (cm) graphite greyL45-21 12RU, 21.125 (53.7) 26.875 (68.3) 22.187 (56.4) L45-GT*Height includes castersH100 Integram Drive, Pacific MO 63069 636-257-3400 www.lowellmfg.com

TvvxááÉÜ|xáProfessionally mountnon-rackmountequipment using RMKSeries rackmount kits.f{xÄäxá ã|à{ vâáàÉÅ ytáv|tM RMK Series Tailor-dress non-rackmount equipment with shelves and custom fascia fora professional and secure installation. Each RMK shelf kit includes rear bracket stops and a fascia plate that will becustom-made to your specifications (see template at www.lowellmfg.com). Vented shelves ship flat and are hinged - no assembly! Choose 2RU to 5RU sizes in painted or black anodized finish.RMK2-14Hingedsides requireno assembly.Custom fasciaattaches afterequipment ismounted.L15-3XL28-193L6-193L9-193PLD3-RMPLWF-195-3LCRS4LCRSL10-315L22-197LD8-RMPLTC-1Series* Description* See website (www.lowellmfg.com) and pricing for individual model numbers in each series. SelectionShelvesRMK Shelf with custom face plate-Rack Kit (black anodized avail-see above) 2RU-5RUL15 Shelf with solid base 10”D (25.4cm) or 14”D (35.6cm) 2RU-3RUL15-3X Shelf with vents and expandable depth 20” - 32”D (50.8 - 81.3cm) 2RUL10 Shelf with vents, hold-down brackets & rear stops 15”D (38.1cm) 2RU-4RUDrawers & Media HoldersL18 Drawer 16.5”D (41.9cm) with optional lock (black anodized avail) 2RU-6RUL28 Drawer 14.5”D (36.8cm) with optional lock 2RU-4RUL22 Media holder for CD’s 4RUPanelsRacking HeightL2 Panel blank aluminum (16ga) formed edge (black anodized avail) 1RU-6RUL2V Panel vneted aluminum (16ga) formed edge (black anodized avail) 1RU-2RUL3 Panel blank steel (16ga) with formed edge 1RU-12RUL6 Panel vented steel (16ga) with formed edge 1RU-2RUL9 Panel security cover with plexiglas or vents 1RU-2RULD3-RMP Panel with cutouts for 3 decora LV devices 1RULD8-RMP Panel with cutouts for 8 decora LV devices 3RULD9-RMP Panel with cutouts for 9 decora LV devices 3RUThermal ManagementLWF-195 Panel with 2 or 3 whisper fans 50cfm ea. 3RULWF-1912 Panel with 4 whisper fans 50cfm ea. 7RULWF-RD2 Panel for rear door with 2 whisper fans 50cfm ea N/ALWF-KIT Single fan in 4.7” (11.9cm) housing with guard 50cfm N/ALTC-1 Fan thermostat control 50-90 O F, 1 duplex outlet N/AWire Management & HardwareLCRS Cable lacing rod 1/4” (.64cm) Dia. straight N/ALCRS4 Cable lacing rod 1/4” (.64cm) Dia. with 4” (10.2cm) offset N/ALCMP Cable lacing panel slotted .625”H (1.6cm) N/ACLB Cable lacing bar 2.625”W x 32”L or 77”L (6.7 x 81.3 x 195.6cm) N/ARSP-500 Jar of 500 PilotPoint screws/washers 10-32 phillips finish headLCMPRSP-500CLB-32100 Integram Drive, Pacific MO 63069 636-257-3400 www.lowellmfg.comI

cÉãxÜACSPR-SCS4-1509Protect your equipmentusing the latest technologiesand meet or exceed all applicable standards.Model* Description OutletsSwitched / unswitchedAC Panels - 19”W with cord and 15A or 20A plugACSPR-SCS4-2009-RT2 20A + 4-step Sequencer + Surge + trigger 6 / 3ACSPR-SCS4-1509 15A + 4-step Sequencer + Surge protection 6 / 3ACR-SCS4-2009-RT2 20A + 4-step Sequencer + trigger 6 / 3ACR-SCS4-1509 15A + 4-step Sequencer 6 / 3ACSPR-2009-VTEACSPR-2009-VTE 20A + Surge + over/under protection 5 / 4ACSPR-1509-VTE 15A + Surge + over/under protection 5 / 4ACSPR-2009 20A + Surge protection 5 / 4ACSPR-1509 15A + Surge protection 5 / 4ACSPR-RPC1-1509L184-TVSSACR-2009 20A 5 / 4ACR-1509 15A 5 / 4ACSPR-RPC1-2009 20A + Surge + Remote power control 6 /3ACSPR-RPC1-1509 15A + Surge + Remote power control 6 /3AC Panels - 19”W with wire leadsL184 15A with blank front, rear outlets 4 duplexL184-TVSS 15A with blank front, rear outlets + surge 4 duplexModels with surge suppression exceed independent testing laboratories most*stringent requirements (1000 strikes @ 6000 volts) x 5 and have a 10 year warranty!Model Description OutletsAC Strips with cordUL180-2C-PTACS-1506 15A strip 20”L x 1.5”W x 1.625”H (50.8 x 3.8 x 4.1cm) 6 singleACS-1512 15A strip 32”L x 1.5”W x 1.625”H (81.3 x 3.8 x 4.1cm) 12 singleACS-1524 15A strip 60”L x 1.5”W x 1.625”H (152.4 x 3.8 x 4.1cm) 24 singleU180-20A 20A strip 30”L x 2”W x 2”H (76.2 x 5.1 x 5.1cm) 6 duplexAC Strips with wire leadsUL180-20A-TVSS-PT 20A strip + surge 30”L x 2”W x 2”H (76.2 x 5.1 x 5.1cm) 6 duplexUL180-WW-PT 15A strip 30”L x 2”W x 2”H (76.2 x 5.1 x 5.1cm) 9 singleUL180-2C-PT Two 15A circuits 30”L x 2”W x 2”H (76.2 x 5.1 x 5.1cm) 6 single, 2 duplexL188 Ten 20A circuits 56”L x 4”W x 2”H (142.2 x 10.2 x 5.1cm) 10 duplexL188-IG Ten 20A circuits 56”L x 4”W x 2”H (142.2 x 10.2 x 5.1cm) 10 iso duplexACS-1512L188J100 Integram Drive, Pacific MO 63069 636-257-3400 www.lowellmfg.com

`ÉÜx cÉãxÜ_Éã iÉÄàtzx fxÖâxÇvxÜá 9 fã|àv{xáSCS8R-ASMChoose 8-step or 4-step sequencers to power connected systemsup and down in time-specified sequence. Features include alarminterface and an Alternate Sequence Mode for secondaryactivation on the 8-step model. Sequencers may be activatedusing a remote switch. Includes power supply.SCS4RKSCS8R-ASM Sequencer 8-step with alternate sequence mode 1RUSCS4RK Sequencer 4-step with key switch activation 1RU_Éã iÉÄàtzx exÅÉàx gÜ|zzxÜ|ÇzRPS SeriesswitchesRPC1RPC-5-CDfâÜzx fâÑÑÜxááÉÜáVersatile controls combine with switches to provide a costeffective method of turning equipment on and off from a remotelocation. Plug-in operation with low voltage connections makesystem installation and future modification easy.Multi-circuit models and versions with wire leads are also available.RPC1RPC1-TVSS-CDRPC-5-CDR-control, 15A 1-circuit, 7.5”L x 1.75”W 3.25”H (19.1 x 4.4 x 8.3cm)R-control, 20A 1-circuit, surge 7.5”L x 2.75”W 3.25”H (19.1 x 7 x 8.3cm)R-control strip, 20A 1-circuit 5 duplex, 30”L x 2”W x 2”H (76.2 x 5.1 x 5.1cm)Professional level surge protection defeats surges up to 72,000 amps andhas a 10-year warranty. Single and multi-circuit models areoffered in 20A and 30A versions with optional GTF filter (a Lowellexclusive). GTF removes high frequency transient noise from the groundavoiding expensive ‘unexplained’ damage to sensitive electronics.ACSP2004IGACSP2004IG-GTFACSP3001IGACSP20C-6C-GTFACSP30C-3CfxÖâxÇvxw _ÉtwvxÇàxÜáSurge 20A 1-circuit, 7”W x 8”H x 3”D (17.8 x 20.3 x 7.6cm)Surge 20A 1-circuit + ground filter, 7”W x 8”H x 3”D (17.8 x 20.3 x 7.6cm)Surge 30A 1-circuit, 7”W x 8”H x 3”D (17.8 x 20.3 x 7.6cm)Surge 20A 6-circuit + ground filter, 14”SQ x 4”D (35.6 x 10.2cm)Surge 30A 3-circuit 14”SQ x 4”D (35.6 x 10.2cm)Enjoy one switch remote control of circuit breakers for time sequencedAC power distribution to all or a partial set of AV components. Systemsinclude an 8-step, 24 circuit sequencer, 1-phase loadcenter and threeswitches. May also be used with multi-circuit surge suppressors (above).ACSP2004IG-GTFStand-alone,rack, or wall useACSP20C-6C-GTFACSP30C-3CACSC-100-20-SC248-ASMACSC-200-30-SC248-ASMSequencer + 100A 20 space breaker for 20 circuitsSequencer + 200A 30 space breaker for 40 circuitsACSC-100-20-SC248-ASMLowell makes every effort to provide accurate information and reserves the right to change specifications and/or improve manufacturing methods.Printed in USA 0208K