LED Warm White Wall Washer - American Lighting
LED Warm White Wall Washer - American Lighting
LED Warm White Wall Washer - American Lighting
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>LED</strong> <strong>Wall</strong> <strong>Washer</strong> - RGB Series<br />
Dynamic, robust, DMX<br />
compatible, low maintenance<br />
4-9<br />
<strong>LED</strong> T8 Tubes<br />
120V, 4100oK dimmable <strong>LED</strong>,<br />
low maintenance<br />
12-13<br />
PRIORI T2<br />
High CRI and high light output<br />
18-21<br />
<strong>LED</strong> 4590<br />
Linkable, versatile, Nichia <strong>LED</strong>s<br />
26-27<br />
<strong>LED</strong> Clear Flex <strong>White</strong><br />
Ultra flexible, transparent<br />
and dimmable<br />
32-33<br />
Neon Flex Plus & Economy<br />
New colored jacket, two<br />
performance levels<br />
38-39<br />
NEW<br />
NEW<br />
NEW<br />
NEW<br />
<strong>LED</strong> Bandolier<br />
Ultra flexible, powerful, indoor/outdoor<br />
<strong>LED</strong> <strong>Warm</strong> <strong>White</strong> <strong>Wall</strong> <strong>Washer</strong><br />
Powerful, low maintenance,<br />
mimics halogen<br />
10<br />
<strong>LED</strong> Downlights<br />
Dimmable high power<br />
or SMD <strong>LED</strong> technology<br />
14-15<br />
PRIORI Xenon<br />
Dimmable, economical, low profile<br />
and dependable<br />
22-23<br />
<strong>LED</strong> Ruler<br />
Dimmable, sleek, linkable<br />
and multi purpose<br />
28-29<br />
Color Changing Clear Flex<br />
Ultra flexible, super bright<br />
and dynamic<br />
34-35 36-37<br />
4-Wire RGB<br />
Popular, 24V and 120V,<br />
flexible and dynamic<br />
Linear Accent Series<br />
<strong>LED</strong> and xenon dimmable festoon<br />
lamps available<br />
44-45 46-47<br />
48<br />
<strong>LED</strong> Linear WW <strong>Wall</strong> <strong>Washer</strong><br />
Low maintenance, mimics<br />
halogen, three lengths<br />
PRIORI Plus <strong>LED</strong> Under Cabinet<br />
Dimmable, high CRI and<br />
energy saving<br />
120V Xenon Under Cabinet<br />
Dimmable, economical<br />
and dependable<br />
T2 Ultra Thin<br />
Ultra thin, energy efficient<br />
and linkable<br />
RGB Neon<br />
High brightness, dynamic<br />
and DMX compatible<br />
<strong>LED</strong> 4-Wire <strong>White</strong><br />
High performance,<br />
rectangular,<br />
24V and 120V<br />
40-41 42-43<br />
Crystal Tube<br />
Safety lighting made to<br />
your specifications<br />
= Constant Current = Constant Voltage AC = Alternating Current = Direct Current<br />
NEW<br />
NEW<br />
NEW<br />
11<br />
16-17<br />
24-25<br />
30-31<br />
DC<br />
NEW<br />
NEW<br />
NEW
Mini 2-Wire<br />
Multi purpose, six colors, ultra<br />
small size<br />
49<br />
<strong>LED</strong> Rope Light Reels<br />
Economical way to buy <strong>LED</strong> rope<br />
54-55<br />
Incandescent Rope Light Reels<br />
Economical, ten color options<br />
60-61<br />
<strong>LED</strong> Lightstar Reels<br />
Economical tree lighting, low voltage<br />
and bright<br />
65<br />
<strong>LED</strong> Puck<br />
<strong>Warm</strong> <strong>White</strong> light, designer finishes<br />
68-69<br />
<strong>LED</strong> Bullet<br />
<strong>Warm</strong> <strong>White</strong>, dimmable,<br />
low profile<br />
74-75<br />
120V Pucks<br />
Economical, no transformer needed,<br />
dimmable<br />
Product<br />
80-81<br />
P = Plug-in<br />
H = Hardwire<br />
<strong>LED</strong> Flexbrite Custom Cut<br />
UL2388 compliant and dimmable<br />
50-51<br />
Custom Cut Incandescent Rope<br />
UL2388 compliant and dimmable<br />
56-57<br />
Commercial Grade Light String<br />
Heavy duty, year round with <strong>LED</strong><br />
lamp options<br />
62-63<br />
<strong>LED</strong> Mini Step Light<br />
Sleek, low level<br />
safety lighting<br />
66 67<br />
<strong>LED</strong> High Power Swivel<br />
Lots of punch, small size,<br />
high efficacy<br />
<strong>LED</strong> Thirty<br />
Versatile, economical,<br />
kits or bulk<br />
76-77<br />
Transformers/Drivers<br />
Reliable!<br />
Power Matrix, page 82<br />
<strong>LED</strong> Flexbrite Kits<br />
UL2388 compliant, quick and easy,<br />
dimmable<br />
52-53<br />
Incandescent Rope Light Kits<br />
UL2388 compliant, quick and easy,<br />
dimmable<br />
58-59<br />
Festoon Light String<br />
Robust, low voltage,<br />
custom made<br />
70-71 72-73<br />
LPL-DR10-300PI<br />
<strong>LED</strong>-DR10-350PI<br />
<strong>LED</strong>-DR12-700, <strong>LED</strong>-DR18-700<br />
<strong>LED</strong>-DR36-700D<br />
LPTR5-BK, LPTR5-WH<br />
<strong>LED</strong>-DR-12, <strong>LED</strong>-DR60-12<br />
<strong>LED</strong>-DR100-12<br />
PS-18-12VPI, PS-36-12VPI<br />
PS-60-12VPI<br />
<strong>LED</strong>-TR driver series<br />
<strong>LED</strong>-DR10-350AL, <strong>LED</strong>-DR12-350<br />
<strong>LED</strong>-DR18-350,<strong>LED</strong>-DR18-350D<br />
<strong>LED</strong>-DR-24, <strong>LED</strong>-DR60-24<br />
<strong>LED</strong>-TR driver series<br />
ALTR series (electronic)<br />
TRE series (electronic)<br />
TR series (magnetic)<br />
TRE series (electronic)<br />
Type of Output<br />
300mA 350mA 350mA 700mA 12V DC 12V DC 12V DC 12V DC 24V DC 24V DC 12V 12V 12V 24V 24V<br />
Page Constant Current<br />
Regulated DC Voltage<br />
AC Voltage<br />
24V (<strong>LED</strong>) 40,42 H<br />
4-Wire<br />
Bandolier (<strong>LED</strong>) 44 H P<br />
Bullet (<strong>LED</strong>) 74 H P<br />
Clear Flex (<strong>White</strong> 32,34 and RGB) H H<br />
Crystal Tube Light (Incand.) 48 P / H H H H H<br />
Crystal Tube Light (<strong>LED</strong>) 48<br />
Festoon Light String (Xenon) 64<br />
H<br />
Festoon Light String (<strong>LED</strong>) 64<br />
H<br />
High Power Swivel (<strong>LED</strong>) 70<br />
H<br />
<strong>LED</strong> Festoon (FSL-WW-12, 46<br />
H<br />
-24) H H H H H H<br />
<strong>LED</strong> Thirty 76 H<br />
Lightstar Reel (<strong>LED</strong>)<br />
Linear Accent Series (Xenon)<br />
Micro Neon Flexbrite (<strong>LED</strong>)<br />
Mini 2-Wire (<strong>LED</strong>)<br />
Mini Step Light (<strong>LED</strong>)<br />
Mini Swivel Series (<strong>LED</strong>)<br />
Puck Light (<strong>LED</strong>)<br />
Puck Light (12V)<br />
65<br />
46<br />
38<br />
49<br />
66<br />
72<br />
68 P<br />
78<br />
P / H<br />
H H<br />
P / H H<br />
H H<br />
H H<br />
H P<br />
H P 82-87P<br />
/ H H<br />
H<br />
H<br />
H<br />
H H<br />
H<br />
Rope 12V (Incandescent) 45 P / H H H H H<br />
Rope 12V (<strong>LED</strong>) 51 H H H H H<br />
Ruler (<strong>LED</strong>) 28 H P<br />
H P<br />
TR series (magnetic)<br />
Indoor/Outdoor Steplight<br />
Durable, indoor/outdoor,<br />
warm white light<br />
<strong>LED</strong> Mini Swivel Series<br />
Three styles, three finishes,<br />
dimmable<br />
12V Pucks<br />
Designer finishes, dimmable<br />
and reliable<br />
78-79<br />
Miscellaneous<br />
Recessed Night Lights<br />
and Dimmers<br />
= Power Supply Required = Hardwire = Plug-in = Dimmable = Suitable for Outdoors<br />
64<br />
88<br />
NEW
The RGB <strong>LED</strong> WALL WASHER SERIES is a set of robust color-washing fixtures that create<br />
dynamic, full RGB color mixes, producing up to 16 million colors and projecting light up to<br />
65 feet. High power <strong>LED</strong>s are rated for up to 100,000 hours and require no maintenance,<br />
saving energy and labor costs. The durable housing are sealed, rated IP65, manage heat<br />
dissipation efficiently, keeping the <strong>LED</strong>s cool. The fixtures meet the needs of lighting<br />
designers, architects and specifiers by offering an exciting new array of effect lighting<br />
possibilities, both interior and exterior.<br />
Building facades signs column lighting statuary<br />
BacKlighting nightcluBs hotels restaurants<br />
120 AC<br />
P
features<br />
• Full RGB color mixing produces 16 million colors<br />
• High brightness <strong>LED</strong>s create a bright wash of light,<br />
projecting up to 65 feet<br />
• Link up to 30 <strong>Wall</strong> <strong>Washer</strong>s in a single run<br />
• Link multiple controllers together to create large<br />
scale synchronized lighting effects<br />
• Adjustable angle design and easy installation<br />
maximizes on site flexibility<br />
• Long life, low maintenance <strong>LED</strong>s last up to<br />
100,000 hours<br />
• DMX 512 compatible<br />
• All units feature durable aluminum alloy housing<br />
with IP65 rating for plug-in use in wet locations<br />
(provide GFCI protection)<br />
• Housing design keeps cool and protects<br />
electronics and <strong>LED</strong>s from heat, prolonging life<br />
• Suitable for heavy duty use (more than 12 hours<br />
per day)<br />
• Three year warranty<br />
5-3/8”<br />
12-5/8”<br />
LEGEND:<br />
WALL WASHER FIXTURE (LW36-RGB)<br />
DMX INTERFACE (DMX-HD)<br />
5-3/8”<br />
8-3/4”<br />
12-5/8”<br />
120<br />
1-5/8”<br />
5-5/16”<br />
5-11/16”<br />
Zenith<br />
18<br />
8-3/4”<br />
120<br />
1-5/8”<br />
5-5/16”<br />
5-11/16”<br />
Zenith<br />
LW36-RGB, REAR VIEW LW36-RGB, SIDE VIEW<br />
18<br />
Bill of materials for Invesco<br />
Field at Mile High installation:<br />
(15) LW36-RGB<br />
(14) LW36-EC15<br />
(14) LW36-EX15<br />
(1) DMX-HD<br />
(1) CUSTOMCABLE<br />
LEGEND:<br />
WALL WASHER FIXTURE (LW36-RGB)<br />
DMX INTERFACE (DMX-HD)<br />
SIGNAL CABLE (LW36-EC15)<br />
POWER CABLE (LW36-EX15)<br />
XLR3 ADAPTER CABLE (CUSTOMCABLE)<br />
www.americanlighting.com 5
The <strong>LED</strong> LINEAR RGB WALL<br />
WASHER SERIES is a set of robust colorwashing<br />
fixtures that create dynamic, full RGB<br />
color mixes, producing up to 16 million colors and<br />
projecting light up to 65 feet. High power <strong>LED</strong>s<br />
are rated for up to 100,000 hours and require no<br />
maintenance, saving energy and labor costs. The<br />
durable housing is sealed, rated IP65, manages<br />
heat dissipation efficiently, keeping the <strong>LED</strong>s cool.<br />
The fixture meets the needs of lighting designers,<br />
architects and specifiers by offering an exciting<br />
new array of effect lighting possibilities, both<br />
interior and exterior.<br />
SIDE VIEW<br />
REAR VIEW<br />
6 www.americanlighting.com<br />
120 AC<br />
Building facades signs statuary<br />
BacKlighting nightcluBs hotels restaurants<br />
features<br />
• Full RGB color mixing produces 16 million colors<br />
• High brightness 1 watt <strong>LED</strong>s create bright, dynamic wash<br />
of light, projecting up to 20 meters (65 feet)<br />
• Sets of Red, Green and Blue <strong>LED</strong>s are controllable via<br />
RGB controller, which also can be used as DMX interface<br />
• Durable die-cast powder coated aluminum housing is<br />
sealed for use in wet locations (IP65)<br />
• Easy to install – each unit has five foot cord with<br />
grounded plug (use with GFCI weatherproof outlet for<br />
each outdoor unit) and durable standoffs with mounting<br />
holes for affixing to various mounting surfaces<br />
• Long life, low maintenance <strong>LED</strong>s last 100,000 hours<br />
(average life)<br />
• Link up to 30 units together to one controller for<br />
synchronous lighting effects<br />
• <strong>LED</strong> sources save significanlty in energy and maintenance<br />
costs when compared to any other type of flood light<br />
source<br />
• Available in three lengths with adjustable tilt with locking<br />
handle design allows on-site housing angle control<br />
• Three year warranty<br />
P
Bill of materials<br />
See linear layout example below and LW36-RGB on page 5 for<br />
assistance in determining a bill of materials.<br />
Determine height and width of area to be lighted<br />
Determine how far fixtures will be from area to be lighted<br />
Determine how many <strong>Wall</strong> <strong>Washer</strong>s to be used*<br />
For synchronous color control, order one LW36-CON for each<br />
run of thirty units or less<br />
For advanced color control, order one DMX-HD and one<br />
LW36-XLR3 for each run of thirty units or less<br />
Determine quantity of fifteen foot signal cables, if needed<br />
Determine quantity of fifteen foot power cables, if needed<br />
(indoor use only). For outdoor use, ensure that each <strong>Wall</strong><br />
<strong>Washer</strong> has a GFCI weatherproof outlet within five feet of<br />
its location.<br />
* For continuous wall wash effect, linear fixtures should be placed<br />
end-to-end and at least 4” from wall or surface to be lighted.<br />
See next page to determine level of control needed (whether to<br />
specify either LW36-CON or LW36-XLR with DMX-HD).<br />
Note: Performance is influenced or affected by surface color<br />
(reflectence) & ambient light levels. Ex. Competing light sources.<br />
Bill of materials for 40 foot wall installation below:<br />
(10) LW36X1-RGB<br />
(1) LW36-CON<br />
installation eXamPle<br />
Each Linear RGB <strong>Wall</strong> <strong>Washer</strong> requires its own outlet or extension cord to a receptacle. However, there is no “power out” cable to<br />
link power from one to the next when using the linear form factor. Data cable can be linked directly, or by using signal extension<br />
cables. See page 9 for accessories.<br />
technical sPecifications<br />
Voltage 120V ac, 60 hz<br />
Construction Aluminum alloy housing and integrated driver with IP65 rating, fully sealed for use in wet locations, black enamel finish<br />
(for lW36-rgB) silver enamel for linear <strong>Wall</strong> <strong>Washer</strong>s<br />
mounting intergrated mounting holes in housing legs/brackets<br />
dimensions lW36-rgB: h = 8-3/4”, W = 12-5/8”, d = 5-11/16”; linear units: h = 5”, W = 2-3/16”,<br />
available lengths = 15-3/4”, 31-1/2” and 47-1/4”<br />
control leads 12” input power and 12” output power adapter lead (lW36-rgB only); 12” input signal and 12” output signal,<br />
mini 3-pin signal connector<br />
switching use switched outlet to control power to controller or streamer<br />
Wattage lW36-rgB = 48 watts; lW12X1-rgB = 21.6 watts, lW24X1-rgB = 43.2 watts, lW36X1-rgB = 64.8 watts<br />
Maximum run For signal: 3,000 feet between controller and final fixture; for “daisy-chaining” indoors 120V power (LW36-RGB): 30 wall washers<br />
Linking data Interconnect directly for 18” spacing; use fifteen foot signal cables (interconnectable to create longer lengths) for linking multiples<br />
Packaging <strong>White</strong> box<br />
led specs 100,000 hour rated life, high power (1-watt) leds, red: 2.4V, green and Blue: 3.6V, 350ma, 5mm, 25° beam angle<br />
dimmers use with dmX compatible interface and dmX controller; not dimmable with wall dimmers<br />
diffuser clear polycarbonate lens<br />
dmX three channels, compatible with usitt standard dmX512 output lighting control software<br />
www.americanlighting.com 7
What leVel of color control do you need?<br />
‘Demo’ mode (continuous sequence of<br />
color fade, color sequence, color washes:<br />
for a demonstration of simple effects (such as<br />
fixed color, color sequence and color wash), you<br />
do not need a controller. Each fixture is factoryset<br />
to id as indicated on the lighted screen<br />
on the back of the array. (see illustration below<br />
for location of lighted screen) if the id is left as<br />
001, the unit will continuously advance through a<br />
factory-set color sequence “demo”.<br />
Stop on pre-programmed colors, continuous<br />
fades, color wash sequences and adjust intensity:<br />
the lW36-con controller is required to produce<br />
synchronous color changing mixes. Various<br />
preprogrammed user buttons make it easy to set<br />
specific colors and also types of color sequences with<br />
separate fade rates. the lW36-con controller must<br />
remain connected to the set of led <strong>Wall</strong> <strong>Washer</strong>s it is<br />
controlling.<br />
Customize colors, light shows, multi-channel scenes:<br />
for more advanced and/or customized lighting control,<br />
the led <strong>Wall</strong> <strong>Washer</strong> can be connected to any standard<br />
usitt dmX 512 controller (like via interface dmX-hd),<br />
allowing the led <strong>Wall</strong> <strong>Washer</strong> to be integrated into<br />
any type of automated or programmed light show. the<br />
adapter cable lW36-Xlr3 or lW36-Xlr3-15 is required<br />
to connect the lW36 <strong>Wall</strong> <strong>Washer</strong>’s signal cable to<br />
Xlr3 equipment.<br />
dmX 512 products typically interface with either 5-pin or<br />
3-pin Xlr3 type connectors. regardless of whether it is<br />
a 3-pin or a 5-pin system, the pin configurations for DMX<br />
512 are standard on pins 1, 2 and 3:<br />
Pin 1 = shield<br />
Pin 2 = dmX-<br />
Pin 3 = dmX+<br />
the city and county Building in denver, colorado utilizes over 550 individually addressed led <strong>Wall</strong> <strong>Washer</strong>s.<br />
contact american lighting for assistance when special cabling and/or expert dmX programming is required.<br />
8 www.americanlighting.com<br />
1 2<br />
3
installation eXamPles<br />
Provide a gfci protected receptacle for each unit<br />
(outdoor installations).<br />
fiXtures<br />
LW<br />
Color Changing<br />
Fixture<br />
12X1 = 12 <strong>LED</strong>s, 15-3/4” length, 21.6 watts<br />
24X1 = 24 <strong>LED</strong>s, 31-1/2” length, 43.2 watts<br />
36X1 = 36 <strong>LED</strong>s, 47-1/4” length, 64.8 watts<br />
36 = 36 <strong>LED</strong> array, 48 watts<br />
accessories<br />
LW36-EC10, LW36-EC15<br />
Ten or fifteen foot signal extension<br />
cable; male and female mini 3-pin<br />
connectors connect data between<br />
fixtures; can be interconnected to<br />
create longer lengths<br />
LW36-XLR3<br />
Two foot adapter cable for DMX;<br />
male mini 3-pin connects to first<br />
fixture, female XLR3 connects to<br />
DMX-HD<br />
DMX-HD<br />
Hardwire interface box with<br />
software for MAC and PC and<br />
adapter cable; USB connects to<br />
dedicated laptop/computer, RC232<br />
connects to DMX-HD<br />
daisy-chain power to units using lW36-eX15<br />
power extension cable (lW36-rgB indoors only).<br />
not every installation requires dmX. factory presets allow multiple static colors and simple fade operations.<br />
Specify DMX equipment when specific color matching is required and/or when fixtures need to have<br />
different colors and values simultaneously. call factory for details.<br />
RGB<br />
LW36-EX15<br />
Power extension cable for<br />
inter-connecting 120V power up<br />
to ten LW36-RGB units only, fifteen<br />
foot length<br />
LW36-XLR3-15<br />
Fifteen foot adapter cable for DMX;<br />
male mini 3-pin connects to first<br />
fixture, female XLR3 connects to<br />
DMX-HD<br />
LW36-CON<br />
Controller for <strong>LED</strong> <strong>Wall</strong> <strong>Washer</strong>,<br />
7 preset colors, some stored<br />
functions including fade and speed<br />
control, 120V AC, 6’ power cord<br />
note: custom 5-pin to 3-pin adapter cables can be ordered (customcaBle). call factory with custom cable requirements.<br />
www.americanlighting.com 9
features<br />
• 3500K white <strong>LED</strong>s provide natural light with<br />
beautiful color rendering<br />
• Durable free-standing aluminum alloy housing is<br />
sealed for use in wet locations (IP65)<br />
• 36 high brightness <strong>LED</strong>s create a bright wash of<br />
light that projects up to 65 feet<br />
• Easy to install – each unit has its own cord with<br />
grounded plug (for outdoor use, provide a GFCI<br />
weatherproof outlet for each fixture)<br />
• Delivers 2600 lumens without heat build-up, using<br />
only 48 watts<br />
• Long life <strong>LED</strong>s (up to 60,000 hours) save labor and<br />
maintenance costs – great retrofit for traditional<br />
sources<br />
• Adjustable tilt design and easy installation<br />
maximize on-site flexibility<br />
• Three year warranty<br />
LWW36-WH<br />
technical sPecifications<br />
Voltage 120V ac, 60 hz<br />
Construction Aluminum alloy housing and integrated driver with IP65 rating, fully sealed for use in wet locations, silver enamel finish<br />
mounting intergrated mounting holes in housing base (includes two masonry anchors)<br />
dimensions h = 11-5/8” (maximum), W = 13-1/2”, d = 7” (base)<br />
Control leads None, not designed to fade, flash or create shows<br />
switching use switched outlet to control power to circuit<br />
Wattage 48 watts<br />
maximum run n/a<br />
linking n/a<br />
Packaging <strong>White</strong> box<br />
led specs 60,000 hour rated life, high power (1-watt) leds, 25° beam angle<br />
dimmers not dimmable<br />
diffuser clear polycarbonate lens<br />
dmX no<br />
10 www.americanlighting.com<br />
LW36-WW<br />
120 AC<br />
Building facades signs statuary<br />
BacKlighting nightcluBs<br />
hotels restaurants<br />
P
features<br />
• 3500°K white <strong>LED</strong>s provide natural light that works great as<br />
a Halogen retrofit<br />
• High power <strong>LED</strong>s project light up to 65 feet<br />
• Linear wall washers located end-to-end create even and<br />
powerful wall washing effects for high impact areas<br />
• <strong>LED</strong>s save energy over Halogen and provide a warm white<br />
light that is not achievable using high intensity discharge<br />
sources, such as Metal Halide or High Pressure Sodium<br />
• IP65 rating allows use in outdoor applications<br />
• Long life <strong>LED</strong>s (up to 60,000 hours) save labor and<br />
maintenance costs<br />
• Adjustable tilt design and easy installation<br />
maximize on-site flexibility<br />
• Three year warranty<br />
5”<br />
fiXtures<br />
L<br />
2-1/2”<br />
2-3/16”<br />
Zenith<br />
45˚<br />
LW WW<br />
Linear<br />
<strong>Wall</strong><br />
<strong>Washer</strong><br />
12X1 = 12 <strong>LED</strong>s, 21.6 watts<br />
24X1 = 24 <strong>LED</strong>s, 43.2 watts<br />
36X1 = 36 <strong>LED</strong>s, 64.8 watts<br />
2”<br />
<strong>Warm</strong><br />
<strong>White</strong><br />
(3500°K)<br />
120 AC<br />
Building facades signs<br />
BacKlighting nightcluBs<br />
hotels restaurants<br />
technical sPecifications<br />
Voltage 120V ac, 60 hz<br />
Construction Aluminum alloy housing and integrated driver with IP65 rating, fully sealed for use in wet locations, silver enamel finish<br />
mounting intergrated mounting holes in legs/brackets<br />
dimensions h = 5” (maximum), W = 2-3/16”, available lengths = 15-3/4” for lW12X1, 31-1/2” for lW24X1, 47-1/4” for lW36X1<br />
control leads n/a<br />
switching use switched outlet to control power to circuit<br />
Wattage lW12X1-WW = 21.6 watts, lW24X1-WW = 43.2 watts, lW36X1-WW = 64.8 watts<br />
maximum run n/a<br />
linking n/a<br />
Packaging <strong>White</strong> box<br />
led specs 60,000 hour rated life, high power (1-watt) leds, 25° beam angle<br />
dimmers not dimmable<br />
diffuser clear polycarbonate lens<br />
dmX no<br />
www.americanlighting.com 11<br />
P
The <strong>LED</strong> T8 LAMPS replace<br />
conventional fluorescent two foot and four foot<br />
T8 and T12 lamps with white <strong>LED</strong> light! Reduce<br />
maintenance costs associated with lamp<br />
replacement. Polycarbonate lens hides <strong>LED</strong>s<br />
rated for 50,000 hours of trouble-free use, while<br />
modeling the look of conventional T8 lamps.<br />
125o beam angle optimizes usable light.<br />
47-5/8” M.O.L. for LT8-4841<br />
23-5/8” M.O.L. for LT8-2441<br />
1-1/8” Dia.<br />
(tube)<br />
1-1/4” Dia.<br />
(end cap)<br />
12 www.americanlighting.com<br />
120 AC H<br />
features<br />
• Instant on – no flickering<br />
• Quiet operation – no humming or buzzing<br />
• Fits into fixtures designed for 24” or 48”<br />
fluorescent lamps (ballast must be bypassed)<br />
• Bright <strong>LED</strong>s produce about 1250 lumens of light<br />
using only 19 watts (66 lumens per watt) for 48”<br />
lamps; approximately 650 lumens using only 9.3<br />
watts (70 lumens per watt) for 24” lamps<br />
• 4100°K <strong>White</strong> light with 70 CRI produces great<br />
light for most commercial and residential<br />
applications<br />
• Long life <strong>LED</strong>s (rated for 50,000 hours of life)<br />
eliminate lamp replacements for years<br />
• 125° beam angle optimizes usable light output<br />
reducing light lost into the housing or reflector<br />
• Polycarbonate lens hides <strong>LED</strong>s and mimics the<br />
look of fluorescent lamps<br />
• Three year warranty
lamPs / retrofits<br />
LT8 41<br />
<strong>LED</strong> T8<br />
Lamps<br />
24 = 24-3/4” length<br />
48 = 47-3/4” length<br />
installation eXamPle<br />
Live end is marked with warning sticker:<br />
For use with non-shunted socket at live<br />
end. Ballast bypass required.<br />
Loosen ballast mounting screws,<br />
disconnect wiring connections and<br />
remove ballast<br />
technical sPecifications<br />
4100°K<br />
Be sure power is disconnected at source.<br />
Open ballast housing cover and disconnect<br />
black and white supply wires.<br />
Using black and white 18G solid wire<br />
leads, connect leads to non-shunted<br />
tombstone sockets (one is included<br />
with each <strong>LED</strong> T8 Lamp).<br />
Determine “live end”. Remove end<br />
cap of fixture, slide existing tomb-<br />
stone sockets off mounting slots.<br />
Press new tombstone sockets into<br />
mounting slots until fully seated.<br />
Replace end cap, with non-shunted sockets attached, to live end of fixture. Attach lead wires from new sockets to supply<br />
wires, matching polarity. Check that ground wire is secure. Cut back and cap off any remaining wires at the “dead end”.<br />
Voltage 120V, 50/60 hz ac operation<br />
Construction PC board inside polycarbonate tube with integrated driver (for non-ballasted fixtures) and aluminum back (heat sink)<br />
Mounting Bi-pin socket mounts into T8 or T12 “tombstone” sockets (power at one end requires non-shunted socket at “live” end).<br />
dimensions diameter (end cap) = 1-1/4”; diameter (tube) = 1-1/8”; available lengths = 23-5/8” and 47-5/8”<br />
Wattage lt8-4841 = 19 watts; lt8-2441 = 9.3 watts<br />
Packaging six led lamps per inner box; sold in quantities of six only<br />
led specs 50,000 hour rated life, 12V low power smd 3528 leds, 70 cri, 125° beam angle<br />
dimmers not dimmable<br />
diffuser frosted polycarbonate lens<br />
www.americanlighting.com 13
• Dimmable with most standard incandescent dimmers!<br />
• Save in running costs over incandescent and eliminate frequent<br />
lamp replacements<br />
• CREE <strong>LED</strong>s ensure performance and consistency<br />
• Highly efficient – Energy Star qualified <strong>LED</strong> Downlight produces<br />
over 45 lumens per watt<br />
• Easy to install – just remove existing lamp and trim, attach<br />
adapter to existing housing and secure <strong>LED</strong> Downlight with<br />
built-in clips<br />
• Long life, low maintenance <strong>LED</strong>s last 35,000 hours (average life)<br />
• 3000°K <strong>Warm</strong> <strong>White</strong> <strong>LED</strong> light and high color rendering produce<br />
attractive area lighting with true color rendering<br />
• Suitable for damp locations<br />
• Three year warranty<br />
energy star<br />
Qualified fiXture lamP / retrofit<br />
LD6-E26-30-WH<br />
6” Recessed<br />
<strong>LED</strong><br />
Downlight<br />
LD6<br />
technical sPecifications<br />
14 www.americanlighting.com<br />
LD4-E26-30-WH<br />
4” Recessed<br />
<strong>LED</strong><br />
Downlight<br />
Voltage 120V, 60 hz ac operation<br />
construction cree leds and integrated driver with aluminum back (heat sink)<br />
Mounting Classified c/UL/us requires use with c/UL/us Listed 6" housing for this self ballasted lamp in either new<br />
construction or retrofit applications; confirm dimensions with the housing manufacturer's specification sheet<br />
Dimensions LD6: H = 5", Dia = 7”; LD4: H = 3-3/4”, Dia = 5”<br />
Wattage 12.9 watts (ld6); 10 watts (ld4)<br />
Packaging retail box, 6 boxes per case<br />
led specs 35,000 hour rated life, 83 cri for ld6, 78 cri for ld4, 85° beam angle<br />
dimmers dimmable with most standard incandescent dimmers<br />
diffuser frosted polycarbonate lens<br />
LD4<br />
120 AC H<br />
110<br />
220<br />
330<br />
Photometrics<br />
(ld6-e26-30-h)<br />
0˚ 15˚ 30˚<br />
Maximum intensity: 313 cd<br />
Luminous flux: 587<br />
Input wattage: 12.9 at 120V<br />
Efficacy: 45.5 lumens/watt<br />
Beam angle: 83°<br />
90˚<br />
75˚<br />
60˚<br />
45˚
• Dimmable with most standard incandescent dimmers!<br />
• Save in running costs over incandescent and eliminate frequent<br />
lamp replacements<br />
• Easy to install – just remove existing lamp and trim, attach<br />
adapter to existing housing and secure <strong>LED</strong> Downlight with<br />
built-in clips<br />
• Long life, low maintenance <strong>LED</strong>s last 35,000 hours (average life)<br />
• 3000°K <strong>Warm</strong> <strong>White</strong> <strong>LED</strong> light and high color rendering produce<br />
attractive area lighting with true color rendering<br />
• Highly efficient – each 6" <strong>LED</strong> Downlight produces over 45 lumens<br />
per watt<br />
• Suitable for damp locations<br />
• Three year warranty<br />
lamPs / retrofits<br />
E6-E26-30-WH E4-E26-30-WH<br />
6” Recessed<br />
<strong>LED</strong><br />
Downlight<br />
E6<br />
technical sPecifications<br />
4” Recessed<br />
<strong>LED</strong><br />
Downlight<br />
E4<br />
120 AC H<br />
Voltage 120V, 60 hz ac operation<br />
construction smd leds and integrated driver with aluminum back (heat sink)<br />
Mounting Classified c/UL/us requires use with c/UL/us Listed 6" housing for this self ballasted lamp in either new construction or<br />
retrofit applications; confirm dimensions with the housing manufacturer's specification sheet<br />
dimensions e6: h = 4-3/4”, dia = 7-1/16”; e4: h = 2-1/2”, dia = 5”<br />
Wattage 15 watts (e6); 10 watts (e4)<br />
Packaging retail box, 6 boxes per case<br />
led specs 35,000 hour rated life, 75 cri, 92° beam angle<br />
dimmers dimmable with most standard incandescent dimmers<br />
Diffuser Frosted polycarbonate lens for 6" version; Clear "Fresnel" style lens for 4" version<br />
100<br />
200<br />
300<br />
400<br />
Photometrics<br />
(e6-e26-30-Wh)<br />
0 15 30˚<br />
Maximum intensity: 377 cd<br />
Luminous flux: 650<br />
Input wattage: 14.3 at 120V<br />
Efficacy: 45.3 lumens/watt<br />
Beam angle: 92o<br />
90˚<br />
75˚<br />
60˚<br />
45˚<br />
www.americanlighting.com 15
15/16”<br />
The <strong>LED</strong> PRIORI PLUS is a new<br />
high performance under cabinet light with three<br />
different installation options and two ways to<br />
link multiple fixtures together. See page 20 for<br />
details. It measures only 15/16” high by 3-3/4”<br />
wide and is offered in four convenient lengths<br />
(8”, 16”, 24” and 32”) and two popular finishes<br />
(Dark Bronze and <strong>White</strong>). Long life <strong>LED</strong>s (35,000<br />
hours rated life) with an embedded driver<br />
eliminate any additional components that<br />
typically have a shorter life span (20,000 hours<br />
or less).<br />
16 www.americanlighting.com<br />
L<br />
*Energy Star Certified in<br />
16", 24" and 32" lengths<br />
3-3/4”<br />
120<br />
Kitchen counters comPuter desKs<br />
retail enVironments disPlay cases medical facilities<br />
WorKstations entertainment centers<br />
features<br />
• Bright <strong>LED</strong> light that is dimmable with most<br />
standard incandescent dimmers!<br />
• Long life <strong>LED</strong>s (35,000 hours rated life) with embedded<br />
driver eliminate the need for a built-in driver or<br />
additional components that typically have a shorter life<br />
span (20,000 hours or less)<br />
• 3200°K ± 300°K <strong>LED</strong>s with a color rendering index over<br />
87 deliver bright white light that mimics halogen – but<br />
without the heat!<br />
• Linkable design allows quick and easy interconnection<br />
with jumpers (sold separately) or directly end-to-end<br />
• Low profile – only 15/16”<br />
• Lens cover wraps around front of housing to prevent<br />
light leaks<br />
• Available in four convenient lengths with standard<br />
cabinet frame sizes in mind<br />
• Available in Dark Bronze (shown) and <strong>White</strong><br />
• Wiring door/access plate allows for easier installation<br />
AC<br />
P/H
fiXtures<br />
043L<br />
PRIORI<br />
PLUS <strong>LED</strong><br />
fixtures<br />
installation eXamPle<br />
accessories<br />
8 = 8-1/2” length , 9 watts<br />
16* = 16-1/2” length, 8.7 watts<br />
24* = 24-1/2” length, 13.1 watts<br />
32* = 32-1/2” length, 17.7 watts<br />
*Energy Star Certified<br />
043J-BR, 043J-WH<br />
Hardwire junction box for PRIORI<br />
fixtures, BRonze or WHite<br />
7-3/8”L x 2-1/8”W x 1”H; includes<br />
12” extension and two 3/8” cable<br />
connectors, c/UL/us Listed<br />
043A-PC6-BK, 043A-PC6-WH<br />
Six foot power cord for PRIORI<br />
fixtures, 120V AC grounded plug<br />
and 3-wire grounded molex<br />
connector, BlacK or WHite, c/UL/us<br />
DB = Dark Bronze<br />
WH = <strong>White</strong><br />
Note: <strong>LED</strong> PRIORI PLUS fixtures<br />
have 3/8” knockouts every 4”<br />
along the back and the top of the<br />
housing. Power cords, junction<br />
boxes and jumpers are sold<br />
separately.<br />
The <strong>LED</strong> PRIORI PLUS can be made up without opening the fixture and its wiring compartment. Open the access panel at the<br />
rear of the fixture, pull the wires out, make up the connections using the quick stab connectors and replace the door. Each<br />
fixture is packaged with a 3/8” wire clamp fitting and easy-to-use stab connectors for quick direct wire assembly.<br />
technical sPecifications<br />
043A-(LENGTH)-EX-WH<br />
<strong>White</strong> linking cables (jumpers)<br />
for connecting multiple PRIORI<br />
fixtures; available in 6”, 12”, 24”<br />
and 36” lengths; c/UL/us Listed<br />
043A-(LENGTH)-EX-BK<br />
Black linking cables (jumpers) for<br />
connecting multiple PRIORI fixtures;<br />
available in 6”, 12”, 24”<br />
and 36” lengths; c/UL/us Listed<br />
Voltage 120V, 60hz ac operation<br />
construction cold rolled steel housing with plastic end caps and plastic ventilation spacers for heat dissipation<br />
mounting mount to underside of shelf or cabinet, at leading edge for best performance; see also page 20.<br />
dimensions h = 15/16”, W = 3-3/4”, available lengths = 8-1/2”, 16-1/2”, 24-1/2”, 32-1/2”<br />
switching on/off rocker switch<br />
Knockouts 3/8” knockouts standard: every 4” along the back and every 4” along top of housing; middle knockout on back of<br />
housing has access panel for quick make-up for hardwire installation without entering wiring compartment.<br />
another hardwire option is to use hardwire junction box (043J-Wh or -Br, sold separately) which include four<br />
3/8” knockouts, two reducers/wire clamps, ‘stab’ connectors and a 12” extension to bring power to a fixture<br />
mounted at the front of the cabinet<br />
Wattages 043l-8 = 9 watts, 043l-16 size = 8.7 watts, 043l-24 size = 13.1 watts, 043l-32 size = 17.7 watts<br />
Power cord Six-foot power cord (043A-PC6, sold separately) for use with “Cord and Plug Installation” shown on page 20<br />
maximum run 600 watts<br />
Packaging retail box<br />
led specs seoul semiconductor leds, 35,000 hour rated life, 87cri, 3200°K ± 300°K , 20ma, 55V, 134° beam angle<br />
dimmers dimmable with most standard incandescent dimmers<br />
diffuser full length tempered prismatic glass lens; hinged lens with magnetic closure<br />
www.americanlighting.com 17
18<br />
The PRIORI T2’s low profile design hides easily in under cabinet lighting applications and<br />
other task lighting situations where a small bright white light is needed. The T2 lamp (3000°<br />
Kelvin) is both efficient and long lasting – the average lamp life is 10,000 hours – while<br />
providing excellent color rendering. Five convenient lengths (10”, 14”, 22”, 28” and 32”)<br />
and three popular finishes (Dark Bronze, Brushed Steel and <strong>White</strong>) allow many choices to<br />
make a complete task lighting system that saves energy while operating at much lower<br />
temperatures than conventional light sources.<br />
Kitchen counters comPuter desKs retail enVironments disPlay cases<br />
medical facilities WorKstations entertainment centers<br />
120<br />
AC<br />
P/H
features<br />
• Low profile design – only 15/16” high<br />
• Bright white light – 30% more light than T4s and T5s<br />
• T2 subminiature technology produces more than<br />
40 lumens per watt saving 75% or more energy over<br />
conventional incandescent sources<br />
• Front lens cover prevents light leakage<br />
• Prismatic tempered glass lens diffuses light<br />
• Full length specular reflector optimizes light output<br />
• Easy installation – lamp included with each fixture<br />
• Choose from plug-in with included power cord or<br />
hardwire featuring stab connectors and multiple<br />
knockouts<br />
• Two Energy Star qualified fixtures are available<br />
with three year warranty (see page 21 for<br />
ordering information)<br />
15/16”<br />
technical sPecifications<br />
L<br />
Magnetic lens closure reliably secures cover<br />
without clips or tabs that can bend or break.<br />
3-3/4”<br />
Quick release clip provides tool-free<br />
access to wiring compartment.<br />
New captive screw speeds installation.<br />
Voltage 120V, 60hz ac operation<br />
Construction Cold rolled steel housing, powder coat finish, full length aluminum reflector and plastic end caps with stand-offs for heat dissipation<br />
mounting mount to underside of shelf or cabinet, at leading edge for best performance; see also page 20.<br />
dimensions h = 15/16”, W = 3-3/4”, available lengths = 10-1/4”, 14-1/2”, 22-1/2”, 28-1/2” and 32-1/2”<br />
switching on/off rocker switch<br />
Knockouts 3/8” knockouts standard: every 4” along the back and every 4” along top of housing; or use hardwire junction box<br />
(043J, sold separately) which includes four 3/8” knockouts, one 12” long “jumper cable”, two reducers/wire clamps<br />
and pre-attached ‘stab’ connectors for quick connection<br />
Wattages 043t-10 = 6 watts, 043t-14 = 8 watts, 043t-22 = 13 watts, 043t-28 = 18 watts, 043t-32 = 24 watts<br />
maximum run 600 watts<br />
Packaging retail box with hang tab<br />
lamp specs 10,000 hour rated life, 90cri, 3000°K, axial base for t2 sockets, 120V<br />
dimmers not dimmable<br />
diffuser full length, captive hinged lens cover with magnetic closure<br />
www.americanlighting.com 19
installation oPtions<br />
The PRIORI T2 under cabinet and designer task light is a convertible fixture, rather than one that is specific to only a hardwire or<br />
only a plug-in installation. This means that the first fixture can be hardwired and linking extensions (“jumpers”) can be used to bring<br />
power to all the others. This also allows one SKU to serve as either a hardwire unit or a plug-in unit (power cords sold separately). In<br />
the past, hardwire fixtures were not allowed to be interconnected with “jumpers”. Each unit had to be hardwired separately.<br />
Installation with Power Cord<br />
Front of fixture<br />
20 www.americanlighting.com<br />
Power cord<br />
When installed with back of fixture facing the<br />
backsplash or back wall, the PRIORI power cord (043A-<br />
PC6) attaches to the right side of the under cabinet<br />
light (as shown above).<br />
Installation with Direct Wire Box<br />
The PRIORI T2 fixture may be hardwired without any<br />
additional parts, however the direct wire box is a<br />
hardwire accessory that allows quick installation with<br />
the added benefit of optimal light distribution over<br />
the work area. Mount under cabinet fixtures near the<br />
front edge of the upper cabinet for best task lighting.<br />
Front of fixture<br />
Hardwire Installation:<br />
Hardwire Installation:<br />
Fixture layout above shows front of fixture facing<br />
backsplash. With this mounting, power enters<br />
lead fixture on the left.<br />
layout eXamPle<br />
043J (junction box)<br />
Linking Cable<br />
043A-(LENGTH)<br />
PRIORI T2 uses the same layout options and<br />
installation accessories as the PRIORI Xenon.<br />
See page 23 for additional installation example.<br />
Bill of materials<br />
Determine installation type: options include<br />
hardwire using knockout, hardwire using junction<br />
box, or cord and plug<br />
Determine quantities and lengths of fixtures<br />
needed<br />
Order junction box (043J) separately for hardwire<br />
system using junction box<br />
Order power cord (043A-PC6) separately for plug-in<br />
system<br />
No additional accessories are required for a<br />
hardwire system using knockouts<br />
Determine layout (linking end-to-end or linking with<br />
cables)<br />
Order 043A linking cables separately (no additional<br />
parts necessary for end-to-end installation)<br />
Bill of materials for example shown above:<br />
(1) 043J-WH (includes one 12” linking cable)<br />
(2) 043T-14-WH<br />
(1) 043A-6-EX-WH
fiXtures<br />
043T<br />
PRIORI T2<br />
Fluorescent<br />
(T2 lamp included)<br />
10 = 10-1/4”<br />
14 = 14-1/2”<br />
22 = 22-1/2”<br />
28 = 28-1/2”<br />
32 = 32-1/2”<br />
note: Priori junction boxes and additional linking cables are sold separately.<br />
* Fixture finishes: BS = Brushed Steel, DB = Dark Bronze, WH = <strong>White</strong><br />
energy star Qualified fiXtures<br />
14 = 14-1/2”<br />
22 = 22-1/2”<br />
BS*<br />
DB*<br />
WH*<br />
043T ES<br />
PRIORI T2<br />
Fluorescent<br />
Shown: 043T-14-DB<br />
All hardwire fixtures include,<br />
3/8” cable clamp adapter and<br />
mounting screws.<br />
DB = Dark Bronze<br />
WH = <strong>White</strong><br />
0453J-BR, 043J-WH<br />
Hardwire junction box for PRIORI<br />
fixtures, BRonze or WHite;<br />
7-3/8”L x 2-1/8”W x 1”H; includes<br />
12” extension and two 3/8” cable<br />
connectors, c/UL/us Listed<br />
043A-PC6-BK, 043A-PC6-WH<br />
Six foot power cord for PRIORI<br />
fixtures, 120V AC grounded plug<br />
and 3-wire grounded molex<br />
connector, BlacK or WHite, c/UL/us<br />
043T<br />
PRIORI T2<br />
Fluorescent<br />
Cord and<br />
Plug<br />
10P = 10-1/4”<br />
14P = 14-1/2”<br />
22P = 22-1/2”<br />
28P = 28-1/2”<br />
32P = 32-1/2”<br />
BS*<br />
DB*<br />
WH*<br />
Note: Energy Star qualified PRIORI T2<br />
fixtures are shipped without a lamp. For<br />
energy star performance levels, use with<br />
f8t2 or f13t2 lamps rated for 10,000<br />
hours or more (average life).<br />
item Wattage # of Knockouts length<br />
043T-10 6 1 10-1/4”<br />
043T-14 8 3 14-1/2”<br />
043T-22 13 5 22-1/2”<br />
043T-28 18 5 28-1/2”<br />
043T-32 24 5 32-1/2”<br />
043T-F06/30, 043T-F08/30, 043T-F13/30, 043T-F18/30, 043T-F24/30<br />
120V T2 fluorescent replacement lamp, 3000°K, Wattages, 6W, 8W,<br />
13W, 18W, 24W; 10,000 hour rated life, CRI = 90<br />
043A-(LENGTH)-EX-WH<br />
<strong>White</strong> linking cables (jumpers) for<br />
connecting multiple PRIORI fixtures;<br />
available in 6", 12”, 24” and 36”<br />
lengths; c/UL/us Listed<br />
043A-(LENGTH)-EX-BK<br />
Black linking cables (jumpers) for<br />
connecting multiple PRIORI fixtures;<br />
available in 6", 12”, 24” and 36”<br />
lengths; c/UL/us Listed<br />
www.americanlighting.com 21
15/16”<br />
The PRIORI XENON is a<br />
convertible under cabinet light with three<br />
different installation options and two ways<br />
to link multiple fixtures to one power supply,<br />
measures only 15/16” high. Coupled with four<br />
convenient lengths (10-1/4”, 14-1/2”, 22-1/2”<br />
and 32-1/2”) and three popular finishes (Dark<br />
Bronze, Brushed Steel and <strong>White</strong>), it offers many<br />
ways to make customized lighting systems. Each<br />
fixture features 120V xenon lamps, eliminating<br />
the need for a transformer, and is dimmable<br />
with most standard incandescent dimmers.<br />
L<br />
22 www.americanlighting.com<br />
0 o<br />
3-3/4”<br />
120<br />
Kitchen counters comPuter desKs<br />
retail enVironments disPlay cases medical facilities<br />
WorKstations entertainment centers<br />
features<br />
• Low profile design – only 15/16” high<br />
• Bright dimmable white light that lasts three times<br />
• longer than halogen<br />
• 120V xenon lamps require no transformer<br />
• Front lens cover prevents light leakage<br />
• Prismatic tempered glass lens reflects light evenly<br />
• Full length specular reflector optimizes light output<br />
• Magnetic lens closure reliably secures cover without<br />
• clips or tabs that can bend or break<br />
• Easy installation – lamps included with each fixture<br />
• Tool-free access to wiring compartment<br />
• New captive screws speeds mounting and installation<br />
• Choose from plug-in with included power cord or hard-<br />
• wire featuring stab connectors and multiple knockouts<br />
• High/low/off switch<br />
AC<br />
P/H
fiXtures<br />
043X<br />
PRIORI<br />
Xenon<br />
(Hardwire)<br />
043X<br />
PRIORI<br />
Xenon<br />
(Cord and Plug)<br />
Note: Each hardwire fixture includes lamp(s) and 3/8”<br />
cable connector. each cord and plug unit includes lamp(s)<br />
and six foot power cord. captive screws (5/8” long) are<br />
standard.<br />
*Fixture finishes: BS = Brushed Steel, DB = Dark Bronze,<br />
Wh = <strong>White</strong><br />
accessories<br />
1 = 10-1/4” length<br />
2 = 14-1/2” length<br />
3 = 22-1/2” length<br />
4 = 32-1/2” length<br />
1P = 10-1/4” length<br />
2P = 14-1/2” length<br />
3P = 22-1/2” length<br />
technical sPecifications<br />
BS*<br />
DB*<br />
WH*<br />
BS*<br />
DB*<br />
WH*<br />
043J-BR, 043J-WH<br />
Hardwire junction box for PRIORI<br />
fixtures, BRonze and WHite<br />
7-3/8”L x 2-1/8”W x 1”H; includes<br />
12”extension and two 3/8” cable<br />
connectors, c/UL/us Listed<br />
043A-PC6-BK, 043A-PC6-WH<br />
Six foot power cord for PRIORI<br />
fixtures, 120V AC grounded plug<br />
and 3-wire grounded molex<br />
connector, BlacK and WHite<br />
c/UL/us<br />
Bill of materials<br />
PRIORI Xenon uses the same layout options and<br />
installation accessories as the PRIORI T2. See page<br />
20 for additional examples.<br />
Bill of materials for end-to-end installation shown<br />
below:<br />
(1) 043X-1-WH<br />
(2) 043X-2-WH<br />
(1) 043J-WH<br />
installation eXamPle<br />
043J (junction box)<br />
Note: If fixtures are mounted with front facing backsplash,<br />
power can enter on left side.<br />
043X-20BP<br />
120V Xenon replacement lamp<br />
20 watt bi-pin, G8<br />
M.O.L. = 1-3/4”<br />
043A-(LENGTH)-EX-BK<br />
Black linking extensions (jumpers)<br />
for connecting multiple PRIORI<br />
fixtures; available in 6", 12”, 24”<br />
and 36” lengths; c/UL/us Listed<br />
Voltage 120V, 60hz ac operation<br />
Construction Cold rolled steel housing, powder coat finish, full length aluminum reflector and plastic end caps with stand-offs for heat dissipation<br />
mounting mount to underside of shelf or cabinet, at leading edge for best performance; see also page 20.<br />
dimensions h = 15/16”, W = 3-3/4”, available lengths = 10-1/4”, 14-1/2”, 22-1/2” and 32-1/2”<br />
switching high/low/off rocker switch<br />
Knockouts 3/8” knockouts standard: every 4” along the back and every 4” along top of housing; or use hardwire junction box<br />
(043J, sold separately) which includes four 3/8” knockouts, two reducers/wire clamps and ‘stab’ connectors<br />
Wattages 043X-1 = 20 watts, 043X-2 = 40 watts, 043X-3 = 60 watts, 043X-4 = 80 watts<br />
Power cord six-foot power cord (043a-Pc6, sold separately)<br />
maximum run 600 watts<br />
Packaging retail box with hang tab<br />
lamp specs 8,000 hour rated life, 100cri, 2800°K, g8 base, 20 watts, 120V, 1-3/4” m.o.l.<br />
dimmers dimmable with most standard incandescent dimmers<br />
diffuser full length, captive hinged lens cover with magnetic closure www.americanlighting.com 23
The 120V XENON Under Cabinet<br />
Light is a great task light for countertops,<br />
workstations and offices; or wherever a<br />
dependable direct wire light source is required.<br />
Practical features include frosted tempered<br />
glass lens, captive hinged cover, High/Low/Off<br />
switch, full length reflector and knockouts along<br />
the back, top and at each end. Available in <strong>White</strong><br />
and Dark Bronze for hardwire applications.<br />
1-7/16”<br />
24 www.americanlighting.com<br />
0 o<br />
4-3/4”<br />
120<br />
features<br />
• Bright white light – ideal for countertops and<br />
workstations<br />
• Includes 120V xenon light bulbs - up to 8,000 hours<br />
rated life<br />
• Dimmable with most standard<br />
• Low profile, only 1-7/16” high<br />
• Front lens cover prevents light leakage<br />
• Prismatic tempered glass lens allows for even light<br />
distribution<br />
• Convenient Hi/Low/Off rocker switch<br />
• Hinged lens makes lamp replacement safe and easy<br />
• Hardwire units have knockouts every 4” along the back<br />
and one at each end and every 4” along the top at the<br />
back edge<br />
• New captive screws speed mounting and installation<br />
• High/Low/Off switch<br />
AC<br />
Kitchen counters comPuter desKs<br />
retail enVironments disPlay cases medical facilities<br />
WorKstations entertainment centers<br />
H
fiXtures<br />
LXC<br />
120V<br />
Xenon<br />
(Hardwire)<br />
accessories<br />
1H = 8-1/4” length<br />
2H = 16-1/2” length<br />
3H = 24-1/2” length<br />
4H = 32-1/2” length<br />
Note: 120V Halogen hardwire units are available in <strong>White</strong> and Dark Bronze only. Substitute LHC for LXC to order.<br />
043X-20BP<br />
120V xenon replacement<br />
lamp; 20 watt bi-pin,<br />
M.O.L. = 1-3/4”<br />
technical sPecifications<br />
DB = Dark Bronze<br />
WH = <strong>White</strong><br />
Bill of materials<br />
Determine quantity of fixtures needed<br />
Determine lengths needed (when selecting sizes for kitchen<br />
counter lighting with framed cabinets, note that the area<br />
inside a framed cabinet will be approximately 1-1/2” smaller<br />
than the cabinet frame; i.e. a 24” cabinet will have 22-1/2”<br />
for mounting a fixture)<br />
Select finish<br />
Voltage 120V, 60hz ac operation<br />
construction cold rolled steel housing with plastic end caps and plastic ventilation spacers for heat dissipation<br />
mounting mount to underside of shelf or cabinet, at leading edge for best performance<br />
dimensions h = 1-7/16”, W = 4-3/4”, available lengths = 8-1/4”, 16-1/2”, 24-1/2” and 32-1/2”<br />
switching high/low/off rocker switch<br />
Knockouts 1” knockouts standard: every 4” along the back and every 4” along top of housing; and one at each end<br />
Wattages lXc-1 = 20 watts, lXc-2 = 40 watts, lXc-3 = 60 watts, lXc-4 = 80 watts<br />
Power cord n/a<br />
maximum run n/a<br />
Packaging <strong>White</strong> box<br />
lamp specs 8,000 hour rated life, 100 cri, 2800°K, 120V bi-pin base<br />
dimmers dimmable with most standard incandescent dimmers<br />
www.americanlighting.com 25
<strong>LED</strong> 4590 This small profile, linear<br />
light fits in corners and small spaces and<br />
delivers high power <strong>LED</strong> light, now available<br />
in 3000°K and 5000°K. The angular design<br />
and mounting clips (included) position the<br />
<strong>LED</strong> 4590 so that it projects light at 45° or<br />
90° into coves, display cases, backbar areas<br />
and more. Linkable fixtures install easily<br />
end-to-end (inline connector included with each<br />
fixture). Plug-in and hardwire power supplies,<br />
along with ‘jumpers’, add to project flexibility.<br />
350 P/H<br />
DC<br />
24<br />
BacK Bar areas comPuter desKs<br />
retail enVironments disPlay cases BacKsPlashes<br />
architectural Built-ins entertainment centers<br />
features<br />
• Rated for heavy duty use (12 or more hours per day)<br />
• High power Nichia <strong>LED</strong>s provide high color<br />
rendering and excellent color consistency<br />
• Available in 3000°K <strong>Warm</strong> <strong>White</strong> and 5000°K Bright<br />
<strong>White</strong><br />
• Housing design features 45˚ and 90˚ mounting positions<br />
• Low profile housing measures only 3/4” high<br />
• Long life <strong>LED</strong>s last up to 30,000 hours<br />
• No harmful ultraviolet (UV) rays<br />
• Highly efficient light consumes only 7 watts per foot<br />
• Easy to install and linkable with inline connectors<br />
(included) or jumpers (sold separately)<br />
• Optional push button switch provides convenient control<br />
• Hardwire and plug-in power supplies available
Bill of materials<br />
Note: The minimum area for one <strong>LED</strong> 4590 is 13-1/2”<br />
(12-1/16” + 1-3/8” added to fixture length to allow<br />
power input at one end).<br />
Determine length in inches of area to be lighted.<br />
Find that length on the chart below to determine fixture<br />
quantity. Note: When using a LCL-PBS switch, add 1-5/8”<br />
to length, then use chart. Note: Lengths are approximate.<br />
For plug-in installations: order one LCL-PS50 for each run of<br />
1-6 fixtures; or one LCL-PS90 for each run up to 8 fixtures.<br />
For hardwire installations: order one <strong>LED</strong>-DR-24 for each run<br />
of 1-3 fixture; or one <strong>LED</strong>-DR60-24 for each run of<br />
1-8 fixtures<br />
For each run in hardwire applications, order one LCL-EC72<br />
to connect to driver's leads (cut off female jack, strip back<br />
to 3/8" – white wire is positive, black wire is negative).<br />
fiXtures<br />
LCL-12<br />
<strong>LED</strong><br />
4590<br />
accessories<br />
3000K = <strong>Warm</strong> <strong>White</strong><br />
5000K = Cool <strong>White</strong><br />
technical sPecifications<br />
<strong>LED</strong>-DR-24<br />
24V DC hardwire Class 2 power<br />
supply, up to 25 watts (1-3 units)<br />
c/UR/us Recognized<br />
<strong>LED</strong>-DR60-24<br />
24V DC hardwire Class 2 power<br />
supply, up to 60 watts (1-8 units)<br />
c/UR/us Recognized<br />
LCL-PS50, LCL-PS90<br />
24V DC plug-in power supply<br />
1-6 units for LCL-PS50; 1-8 units for<br />
LCL-PS90; c/UL/us Listed<br />
length to be lighted<br />
Note: Each fixture includes inline connector and two clear<br />
mounting clips with screws. mounting clips are 1” wide;<br />
mounting screws are 5/8” long. LCL-6 (4 watts, 6-1/6"<br />
length) also available, in 3000°K only, while supplies last.<br />
LCL-EC72<br />
Extension cable for <strong>LED</strong> 4590; adds<br />
72” additional lead from power<br />
supply to beginning of run<br />
LCL-EX6, LCL-EX12, LCL-EX36<br />
Jumper cables for <strong>LED</strong> 4590;<br />
includes attached power<br />
connectors, black wire; available<br />
in 6”, 12” and 36” lengths<br />
LCL-PBS<br />
On/Off pushbutton switch for <strong>LED</strong><br />
4590; includes clear mounting clip<br />
and mounting screw; adds 1-5/8”<br />
additional length to overall run<br />
Voltage 24V dc operation<br />
construction heavy-gauge, extruded aluminum with plastic end caps and leds spaced every 2”<br />
mounting 45°/90° clear plastic mounting clips (included with each fixture)<br />
dimensions h = 3/4”, W = 5/8”, available lengths = 6-1/16”, 12-1/16” and 24-1/16”<br />
switching use with switched outlet for on/off control, or control with on/off pushbutton switch (lcl-PBs) sold separately<br />
Wattage 7 watts<br />
Power cord Plug-in drivers have six foot power cords and six foot lead wire with dc jack<br />
maximum run 56 watts (approximately 100”) with either hardwire led-dr60-24 or plug-in lcl-Ps90 power supply<br />
Linking See ACCESSORIES for linking extensions allowing multiple fixtures in a run to be linked together<br />
Packaging retail box<br />
led specs 30,000 hour rated life, 85 cri, 3000°K and 5000°K high power nichia leds, 24V dc<br />
dimmers not dimmable<br />
diffuser full length, clear acrylic lens<br />
number of fixtures<br />
13-1/2” – 25” 1 x lcl-12<br />
25-1/2” – 37-1/2” 2 x lcl-12<br />
38” – 50” 3 x lcl-12<br />
50-1/2” – 62-1/2” 4 x lcl-12<br />
63” – 75” 5 x lcl-12<br />
75-1/2” – 87-1/2” 6 x lcl-12<br />
88” – 100” 7 x lcl-12<br />
100.5” 8 x lcl-12<br />
more than 113” Break into two runs
<strong>LED</strong> RULER The <strong>LED</strong> Ruler’s sleek<br />
design and ultra thin profile fits in the smallest<br />
of spaces, yet provides an abundance of white<br />
3100 Kelvin light. Durable, attractive and<br />
seamless in performance, this accent and task<br />
light is available in a satin brushed finish and<br />
four multi-purpose lengths. The <strong>LED</strong> Ruler offers<br />
a long 60,000 hour maintenance free life while<br />
emitting no harmful ultraviolet light. It operates<br />
cool, installs quickly and easily and there are no<br />
lamps to replace.<br />
1/8” 9/32”<br />
15/16”<br />
28 www.americanlighting.com<br />
350 DC<br />
P/H<br />
Kitchen counters comPuter desKs<br />
retail enVironments disPlay cases medical facilities<br />
WorKstations entertainment centers<br />
features<br />
• High light output with low energy consumption<br />
• Bright white 3100K <strong>LED</strong> light with a sleek,<br />
ultra-slim design!<br />
• Durable and attractive brushed satin aluminum<br />
finish<br />
• Long life <strong>LED</strong>s (60,000 hours average life)<br />
• Four conveniently sized units that can be<br />
interconnected to create custom lengths<br />
• Easy installation – no lamps to install<br />
• <strong>LED</strong> Rulers interconnect end-to-end with inline<br />
connectors (included) and other accessories<br />
including jumper cables and multi-angle connectors
fiXtures<br />
RULER<br />
<strong>LED</strong><br />
RULER<br />
accessories<br />
2 = 7-1/8” length<br />
3 = 10-7/8” length<br />
4 = 14-5/8” length<br />
5 = 18-3/8” length<br />
note: each led ruler includes two clear<br />
mounting clips wth screws and an inline<br />
connector for linking multiple rulers together.<br />
technical sPecifications<br />
RULER-CONKIT<br />
Power connector kit with eight foot<br />
24AWG lead and end cap<br />
Required for each run of <strong>LED</strong> Rulers<br />
<strong>LED</strong>-DR18-350<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver Class 2, 10-18 watts,<br />
6”L x 2-5/8”W x 1-3/16”H<br />
c/UR/us Recognized<br />
<strong>LED</strong>-DR12-350<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver Class 2, 6-12 watts,<br />
6-5/8”L x 1-1/2”W x 1-3/16”H<br />
c/UR/us Recognized<br />
Bill of materials<br />
Determine length(s) in inches of area(s) to be lighted<br />
For each area, divide the length in inches by 3.9 and round<br />
down to the next nearest number. This is the number of <strong>LED</strong>s<br />
needed for that length run. For example, a 36” area will fit 9<br />
<strong>LED</strong>s (36 ÷ 3.9 = 9.2, rounded to 9).<br />
Select a combination of sizes and quantities to equal this<br />
number. For example, to equal 9 <strong>LED</strong>s, select three RULER-3s<br />
(3 x 3) or one RULER-4 and one RULER-5 (4 + 5).<br />
For hardwire installations order one <strong>LED</strong>-DR10-350AL for each<br />
run up to 8 <strong>LED</strong>s; order one <strong>LED</strong>-DR12-350 for each run of 5-9<br />
<strong>LED</strong>s; order one <strong>LED</strong>-DR18-350 for each run of 8-14 <strong>LED</strong>s;<br />
order one <strong>LED</strong>-DR18-350D for each run of 3-12 <strong>LED</strong>s and/or<br />
for applications where dimmability is important<br />
Order one RULER-CONKIT for each run<br />
Order jumpers, multi-angle connectors (RULER-90) as needed<br />
<strong>LED</strong>-DR18-350D<br />
Dimmable hardwire driver,<br />
7-1/8”L x 1-3/4”W x1-1/4”H<br />
Constant current, 350mA,<br />
3-12 <strong>LED</strong>s, UL Recognized<br />
Enclosure (ENCL-11) sold separately<br />
<strong>LED</strong>-DR10-350AL<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver, Class 2, 1-10 watts,<br />
4-1/8”L x 1-3/8”W x 1-1/16”H<br />
c/UR/us Recognized<br />
RULER-EX6, RULER-EX12, RULER-EX36<br />
Jumper cable with attached power<br />
connectors; 6”, 12” or 36” length<br />
RULER-90<br />
Multi-angle connector for corners<br />
(can also be used as a 1” jumper)<br />
Voltage 350ma, 50/60hz operation<br />
construction heavy-gauge, extruded aluminum with plastic molex end sockets and high power leds mounted on integrated Pc board<br />
Mounting Mounting clips (included with each fixture)<br />
dimensions h = 5/16”, W = 15/16”, available lengths = 7-1/8”, 10-3/4”, 14-1/2” and 18-1/4” (without ruler-conKit)<br />
lead wires ruler-conKit has an eight foot lead wire, 24aWg with bare ends (end cap plus live end are 1-3/8” length)<br />
switching use a switched outlet on the primary side of the hardwire driver for on/off control<br />
Wattages ruler-2 = 2.5 watts, ruler-3 = 3.75 watts, ruler-4 = 5 watts and ruler-5 = 6.25 watts<br />
maximum run determined by driver; 17.5 watts (14 leds total) is maximum single run which equals approximately 54”<br />
linking use included inline connector for end-to-end linking; see also jumpers and ruler-90 (above)<br />
Packaging <strong>White</strong> box with label<br />
led specs 60,000 hour rated life, 350ma, high power (1 watt) leds, 3100K, 85 cri, 110° beam angle<br />
dimmers dimmable only with led-dr18-350d; see www.americanlighting.com for dimmer compatibility (driver cut sheet)<br />
diffuser clear silicone led cover<br />
www.americanlighting.com 29
T2 ULTRA THIN high output<br />
and low profile light will work for almost any<br />
application necessary; under cabinets where<br />
there is limited space, work areas, menu<br />
boards, and any tight space that needs bright<br />
light. The T2 Ultra Thin is packaged with a plugin<br />
power cord, 3” linking connector, 12” linking<br />
connector, mounting clips for vertical and<br />
horizontal mounting and T2 lamp. This fixture is<br />
available in two lengths, 13-3/8” (8 watts) and<br />
21-3/8” (16 watts).<br />
13-3/8”<br />
21-3/8”<br />
30 www.americanlighting.com<br />
coVe lighting Kitchen counters comPuter desKs<br />
retail enVironments disPlay cases medical facilities<br />
WorKstations entertainment centers<br />
features<br />
• T2 subminiature technology produces 30% more light<br />
than corresponding T4 and T5 fixtures<br />
• High color rendering provides natural light for showing<br />
true colors<br />
• Linkable 120V design speeds installation and allows runs<br />
up to ten fixtures<br />
• Small housing (only 3/4” wide by 1-7/16” high, including<br />
mounting clips) fits in small coves, under cabinets and<br />
behind surfaces for backlighting effects<br />
• Long life, T2 fluorescent lamps last 10,000 hours<br />
(average life)<br />
• Easy installation – use with Slim-line Hardwire Box<br />
(sold separately) for hardwire installations or<br />
just plug in with six foot power cord (included)<br />
• Available in two linkable lengths: 13-3/8” and 21-3/8”<br />
• On/off rocker switch<br />
90o clip mounting option<br />
end view<br />
120<br />
AC<br />
P/H<br />
"U" clip mounting option<br />
end view
fiXtures<br />
ALT2<br />
T2<br />
Ultra Thin<br />
Each fixture includes six foot power cord, 12” linking<br />
connector, 3” linking connector, 3500°K T2 lamp and<br />
mounting hardware. Mounting screws are 5/8” long.<br />
Answer to second<br />
step of B.O.M.<br />
(rounded down to<br />
nearest integer)<br />
1<br />
2<br />
3<br />
accessories<br />
13 = 13-3/8” length, 8 watts<br />
21 = 21-3/8” length, 13 watts<br />
22”<br />
Number of Fixtures Needed<br />
ALSLBOX-WH-B<br />
slim-line hardwire box allows for<br />
direct wire of 120V xenon puck light<br />
products, 2 molex outlets, 5 amp<br />
maximum each, on/off switch<br />
4”l x 2.5”W x 1”h<br />
ALT2-EX6, 24, 48<br />
Jumpers for linking multiple alt2<br />
fixtures, available in 6”, 24”, 48”<br />
lengths, <strong>White</strong> c/etl/us listed<br />
(3” and 12” length jumpers are<br />
included with each fixture<br />
T2-F08/30, ALT2-F08/35<br />
t2 replacement lamp, boxed,<br />
8 watts, 120V, m.o.l. = 12-9/16”<br />
available in 3000°K and 3500°K<br />
T2-F13/30, ALT2-F13/35<br />
t2 replacement lamp, boxed,<br />
13 watts, 120V, m.o.l. = 20-9/16”<br />
available in 3000°K and 3500°K<br />
technical sPecifications<br />
30” 38”<br />
2 x ALT2-13 1 of each 2 x ALT2-21<br />
4 x ALT2-13 2 of each 4 x ALT2-21<br />
6 x ALT2-13 3 of each 6 x ALT2-21<br />
Bill of materials<br />
Note: The minimum area for one ALT2-13 is 14-3/8”;<br />
the minimum for one ALT2-21 is 22-3/8” (1” added to<br />
fixture length to allow power input at one end). There<br />
are multiple applications for this product that produce<br />
a variety of ways to determine the bill of materials. The<br />
following directions and related example are suited<br />
toward cove/linear lighting where a continuous lighting<br />
effect is required. The chart is based on 11” of light from<br />
each ALT2-13 and 19” of light from ALT2-21.<br />
Determine length in inches of area to be lighted. If it’s<br />
less than 22-3/8”, only one fixture is required.<br />
Divide the length by 22”, 30” and 38”. Determine which<br />
divisor results in the lowest remainder (the amount<br />
after the decimal). Use that divisor’s column in the<br />
chart below to determine fixture quantities and lengths.<br />
For hardwire installations, order one ALSL-BOX for<br />
each set of lights, up to ten fixtures linked together.<br />
Note: Located ALSLBOX-WH-B in center of area and<br />
run up to ten fixtures in each direction (Slim-line<br />
hardwire box features two 5A circuits and one On/Off<br />
rocker switch.) For plug-in installations, no additional<br />
parts are necessary.<br />
coVe/linear lighting eXamPle<br />
Fixtures can be stagger mounted to have continuous light<br />
without dark spots. A 2" minimum cove width is required.<br />
Voltage 120V, 60hz ac operation<br />
construction heavy duty plastic housing<br />
Mounting "U" clips or 90o clips (included with fixture); in straight line configuration or stagger mounting option shown above<br />
dimensions h = 1-7/16” (including mounting clip), W = 1”, available lengths = 13-3/8” and 21-3/8”<br />
switching on/off rocker switch<br />
Knockouts n/a<br />
Wattages alt2-13 = 8 watts, alt2-21 = 13 watts<br />
Power cord six-foot power cord included<br />
Maximum run Ten fixtures<br />
Packaging <strong>White</strong> box<br />
lamp specs 10,000 hour rated life, 90cri, 3500°K, t2 base, 120V; 8 watt lamps are 12-9/16” m.o.l., 13 watt lamps are 20-5/8” m.o.l.<br />
dimmers not dimmable<br />
diffuser full length linear prismatic lens<br />
www.americanlighting.com 31
<strong>LED</strong> CLEAR FLEX delivers<br />
performance. CREE chips ensure white<br />
color temperature consistency and high<br />
color rendering. <strong>LED</strong>s are protected inside a<br />
rectangular PVC structure that is flexible, yet<br />
robust. Two <strong>LED</strong> spacings are available in Bright<br />
<strong>White</strong> (5500°K) and <strong>Warm</strong> <strong>White</strong> (3000°K).<br />
24V operation allows run lengths up to 20<br />
meters (approximately 65’7”). Save energy and<br />
significantly reduce maintenance costs. For<br />
dimming applications, use with <strong>LED</strong>-TR drivers<br />
and low voltage magnetic dimmers. See facing<br />
page for more details.<br />
Each kit includes the following components:<br />
• 16.40 foot (5 meter) reel of Clear Flex<br />
• 3 power connection kits (one is pre-attached)<br />
• 1 splice kit to join two sections/reels together<br />
• 16 mounting clips<br />
32 www.americanlighting.com<br />
Kitchen counters architectural Built-ins<br />
BacKlighting effects disPlays<br />
coVes aBoVe caBinets in caBinets<br />
features<br />
• New ribbon-like linear lighting that hides in the smallest<br />
of spaces - measuring less than 1/2” wide by 3/16” high<br />
for white<br />
• High quality CREE chips ensure performance, white color<br />
consistency and great color rendering<br />
• <strong>LED</strong>s at .65” spacing deliver over 100 lumens per foot<br />
(Bright <strong>White</strong>); over 70 lumens per foot (<strong>Warm</strong> <strong>White</strong>)<br />
• Ultra flexible, yet robust PVC housing allows tight bends<br />
(up to 5/8” radius)<br />
• Save over 75% in running costs over incandescent linear<br />
systems (festoon style sockets and lamps)<br />
• Long life, low maintenance <strong>LED</strong>s (50,000 hours rated life)<br />
• 24V operation allows run lengths up to 65 feet<br />
• Easy installation – <strong>LED</strong> Clear Flex kits have pre-attached<br />
power cord (<strong>LED</strong> driver required, sold separately)<br />
• Available in <strong>Warm</strong> <strong>White</strong> (3000°K) and Bright <strong>White</strong><br />
(5500°K)<br />
• Cuttable every 4” (approximately), allowing more<br />
precise lengths for specific custom projects<br />
• Can be used outdoors (IP68 rated) – all joints, end caps<br />
and connections must be properly sealed to achieve<br />
IP68 rating<br />
• Designed for light duty use (6 hours per day maximum)<br />
24<br />
DC<br />
H
fiXtures<br />
installation eXamPle<br />
36”<br />
CFX2-60<br />
CREE Single<br />
Color<br />
(2.2 watts/ft)<br />
16”<br />
accessories<br />
WW = <strong>Warm</strong> <strong>White</strong> (3000°K)<br />
WH = Bright <strong>White</strong> (5500°K)<br />
! In any outdoor installation, all conductors must be coated<br />
with dielectric grease, and properly sealed with silicone and<br />
shrink tube.<br />
108”<br />
20”<br />
CFX2-CONKIT-NP<br />
Power connection kit includes five<br />
foot power connector cord, end<br />
cap, two pieces of shrink tube<br />
CFX2-SPL<br />
Splice kit, includes 2” section of<br />
shrink tube and splice connector<br />
<strong>LED</strong>-DR-24<br />
24V DC power supply, 1-25 watts<br />
Up to approximately 11’2” run<br />
Class 2, c/UR/us Recognized<br />
<strong>LED</strong>-DR60-24<br />
24V DC power supply, 1-60 watts<br />
Up to approximately 27’2” run<br />
c/UR/us Recognized; Enclosure<br />
(ENCL-11) sold separately<br />
Bill of materials<br />
Determine total length of linear lighting to be used<br />
For lengths up to 16’ 4-3/4” (5m), order one Clear<br />
Flex kit; up to 32’ 9-1/2” (10m), order two kits; up to<br />
49’2” (15m), order three kits; for lengths up to the<br />
maximum run length of 65’7” (20m), order four kits<br />
Determine total number of watts (2.2 watts per foot)<br />
and best location for power supply<br />
Order 24V DC power supply with appropriate capacity<br />
to accommodate power load (see below)<br />
Order aluminum track (CFX2-CHAN-4) for straight runs<br />
Bill of materials for 27 foot <strong>Warm</strong> <strong>White</strong> installation:<br />
(2) CFX2-60-WW (59.4 watts for 27 feet)<br />
(1) <strong>LED</strong>-TR-100-24 (60% of capacity)<br />
or <strong>LED</strong>-DR60-24 (100% of capacity)<br />
! <strong>LED</strong>-TR Series will need 12" clearance above and<br />
around housing for heat dissipation. Otherwise the<br />
maximum load is 80% capacity.<br />
CFX2-JUMP__<br />
Jumper to connect two sections<br />
of CFX2 together, includes shrink<br />
tube; specify .5 (6”) , 1 (12”), 6<br />
(72”) or 10 (120”) lengths<br />
CFX2-ENDS<br />
Three-pack of clear plastic end caps<br />
CFX2-CLIPS<br />
Clear plastic mounting clip with<br />
mounting screws, sold in bags of 16<br />
CFX-GLUE<br />
20mL bottle of glue/sealant for<br />
proper connection of all joints,<br />
end caps and power cords<br />
<strong>LED</strong>-TR-___-24<br />
24V DC power supply; Specify<br />
30, 60, 100 or 150 watts, 40%<br />
minimum; dimmable with low<br />
voltage magnetic dimmers, c/UL/us<br />
technical sPecifications<br />
Voltage 24V dc operation<br />
construction rectangular-shaped clear PVc housing with leds spaced every .65”<br />
mounting mounting clips (included with each kit) or four foot aluminum mounting track (cfX2-chan-4)<br />
dimensions h = 3/16”, W = 13/32”<br />
reel length 16.40 feet<br />
cuttability every 3.9” (10cm)<br />
Wattage 2.2 watts per foot<br />
Maximum run Four kits can be interconnected (powered by a single “conkit”) which totals a maximum of 65’7” (20 meters)<br />
Packaging <strong>White</strong> box<br />
led specs cree leds, 50,000 hours rated life, Bright <strong>White</strong> (Wh) is 5500°K, <strong>Warm</strong> <strong>White</strong> (WW) is 3000°K; 10 ma, 24V dc<br />
dimmers dimmable with most low voltage magnetic dimmers when used in conjunction with led-tr series within minimum and<br />
maximum load specifications<br />
www.americanlighting.com 33
fiXtures<br />
COLOR CHANGING<br />
CLEAR FLEX uses a dynamic RGB<br />
fade that produces 16 million colors (with DMX<br />
control) or seven static colors with three color<br />
fade that includes white light (with handheld<br />
remote control). Small robust PVC housing fits<br />
in tight spaces and produces attention grabbing<br />
effect lighting. Save energy, reduce heat buildup<br />
into the space and reduce maintenance<br />
costs. Two <strong>LED</strong> spacings are available: .65” and<br />
1.09”. 24V operation allows run lengths up to 20<br />
meters (approximately 65’7”). See facing page<br />
for more details.<br />
CFX4<br />
Color<br />
Changing<br />
Clear Flex<br />
5/8”<br />
3/16”<br />
36-RGB = 1.09” <strong>LED</strong> spacing,<br />
1.4 watts/ft<br />
60-RGB = .65” <strong>LED</strong> spacing,<br />
2.2 watts/ft<br />
Each kit includes the following components:<br />
• 16.40 foot (5 meter) reel of Clear Flex<br />
• 3 power connection kits (one is pre-attached)<br />
• 1 splice kit to join two sections/reels together<br />
• 16 mounting clips<br />
34 www.americanlighting.com<br />
signs loBBies <strong>Wall</strong> Washing lounges<br />
retail enVironments disPlays<br />
nightcluBs BacKlighting effects coVes<br />
features<br />
• Dynamic ribbon-like color changing lighting that hides<br />
in the smallest of spaces - measuring only 5/8” wide by<br />
3/16” high<br />
• Ultra flexible, yet robust PVC housing allows tight bends<br />
(up to 5/8” radius)<br />
• Long life, low maintenance <strong>LED</strong>s (50,000 hours rated life)<br />
• 24V operation allows run lengths up to 65 feet<br />
• Easy installation – <strong>LED</strong> Clear Flex kits have pre-attached<br />
power cord (<strong>LED</strong> driver and controller required, each sold<br />
separately)<br />
• Cuttable every 3.9” (for CFX4-60-RGB) or 6.5” (for<br />
CFX4-36-RGB), allowing more precise lengths for<br />
specific custom projects<br />
• Can be used outdoors (IP68 rated) – all joints, end caps<br />
and connections must be properly sealed to achieve<br />
IP68 rating<br />
• Choose from various styles of fade and color control<br />
including with remote or using DMX<br />
• Bright white color can be achieved, however factory<br />
recommends limited running times (6 hours per day<br />
maximum) for this "all-on" mode<br />
24<br />
DC<br />
H
Bill of materials<br />
For bill of materials, first follow list on page 33, then order<br />
one fade controller for each run (see maximum run lengths<br />
and details below); order CFX4-CHAN-4 for straight runs<br />
27 foot installation with CFX4-36-RGB and custom color stop:<br />
(2) CFX4-60-RGB (91.8 watts for 27 ft)<br />
(1) <strong>LED</strong>-RGB-3S-1/30-24<br />
(1) <strong>LED</strong>-CFX4-490EC3<br />
(1) <strong>LED</strong>-TR-150-24 (61% of capacity)<br />
accessories<br />
CFX4-CONKIT-NP<br />
Power connection kit includes five foot<br />
power connector cord, end cap and<br />
two pieces of shrink tube<br />
CFX4-JUMP__<br />
Jumper to connect two sections<br />
of CFX4 together, includes shrink<br />
tube; specify .5 (6”) , 1 (12”), 6<br />
(72”) or 10 (120”) lengths<br />
CFX4-144W-24V<br />
24V DC Fade controller with handheld<br />
remote, single color selection and fade<br />
rate control; max run per power supply<br />
use with <strong>LED</strong>-DR power supply only<br />
<strong>LED</strong>-DR-24<br />
24V DC power supply, 1-25 watts<br />
Up to approximately 11’2” run<br />
Class 2, c/UR/us Recognized<br />
<strong>LED</strong>-DR60-24<br />
24V DC power supply, 1-60 watts<br />
Up to approximately 27’2” run<br />
c/UR/us Recognized; Enclosure<br />
(ENCL-11) sold separately<br />
<strong>LED</strong>-4WR-490CTRL-24V<br />
Dual output controller/DMX interface<br />
with adjustable effects and presets;<br />
connects to <strong>LED</strong>-4WR-490CTRL-24P;<br />
DMX in and DMX out leads<br />
Bill of materials for 27 foot installation with CFX4-36-<br />
RGB and handheld remote control:<br />
(2) CFX4-36-RGB (54 watts for 27 ft)<br />
(1) <strong>LED</strong>-TR-60-24<br />
(1) CFX4-144W-24V<br />
! <strong>LED</strong>-TR Series will need 12" clearance above and around<br />
housing for heat dissipation. Otherwise the maximum load<br />
is 80% capacity.<br />
In any outdoor installation, all conductors must be<br />
coated with dielectric grease, and properly sealed<br />
with silicone and shrink tube.<br />
CFX4-ENDS<br />
Three-pack of clear plastic end caps<br />
CFX4-CLIPS<br />
Clear plastic mounting clip with<br />
mounting screws, sold in bags of 16<br />
CFX4-SPL<br />
Splice kit, includes 2” section of shrink<br />
tube and splice connector<br />
<strong>LED</strong>-RGB-3S-1/30-24<br />
24V DC Fade controller for CFX4 (up to<br />
65’7” for CFX4-36-RGB, up to 42’7” for<br />
CFX4-60-RGB; speed control and color<br />
stop; use with <strong>LED</strong>-TR power supply only<br />
<strong>LED</strong>-CFX4-490EC3<br />
Controller for Color Changing Clear Flex<br />
adapter cable required for all controller<br />
types; one for each run (connects to<br />
power connection kit lead wires)<br />
<strong>LED</strong>-TR-_____-24<br />
24V DC power supply; Specify 30, 60,<br />
100 or 150 watts; 40% minimum load;<br />
dimmable with most magnetic low<br />
voltage dimmers; c/UL/us<br />
<strong>LED</strong>-4WR-490CTRL-24P<br />
24V DC power supply for use with<br />
<strong>LED</strong>-4WR-490-CTRL-24V; up to 98’4”<br />
combined max run; five foot grounded<br />
120V AC power cord and 24V DC output<br />
technical sPecifications<br />
Voltage 24V dc operation<br />
construction rectangular-shaped clear PVc housing with leds spaced every 1.09” for cfX4-36-rgB; every .65” for cfX4-60-rgB<br />
mounting mounting clips (included with each kit) and four foot aluminum mounting track (cfX4-chan-4)<br />
dimensions h = 3/16”, W = 5/8”<br />
reel length 16.40 feet<br />
Cuttability Every 6.5" (16.5cm) for CFX4-36-RGB; Every 3.9” (10cm) for CFX4-60-RGB<br />
Wattage 1.4 watts per foot for cfX4-36-rgB; 2.2 watts per foot for cfX4-60-rgB<br />
Maximum run Four kits can be interconnected (powered by a single “conkit”) which totals a maximum of 65’7” (20 meters)<br />
Packaging <strong>White</strong> box<br />
led specs 50,000 hours rated life, 10 ma, 24V dc<br />
dimmers not dimmable, see accessories for controller functions<br />
www.americanlighting.com 35
RGB NEON FLEXBRITE<br />
provides a unique replacement for traditional<br />
neon with even and bright color changing effect<br />
lighting. The durable PVC jacket blends and<br />
diffuses red, green and blue long life <strong>LED</strong>s rated<br />
up to 100,000 hours to provide the full spectrum<br />
of color options. A variety of controllers are<br />
available offering crossfades with speed<br />
control, color select, and DMX capabilities. RGB<br />
Neon Flexbrite is easily installed, requiring no<br />
transformer, and has the ability to create runs<br />
up to 150 feet*!<br />
36 www.americanlighting.com<br />
120 AC<br />
restaurant and Bar décor signs and casino games<br />
architectural details BacK lighting<br />
home theatres neon rePlacement coVes<br />
features<br />
• Even and bright color changing effect lighting<br />
• Safe, flexible and durable alternative to neon tubes<br />
• Create long runs (up to 150 feet*) with energy saving<br />
<strong>LED</strong> lighting<br />
• Produces virtually no heat for maximum safety<br />
• Long life <strong>LED</strong>s last up to 100,000 hours<br />
• Various controllers offer crossfades with speed control,<br />
color select and DMX capabilities<br />
• Easy installation – no transformer required!<br />
* Run distances greater than reel length (81 feet) will require splicing<br />
multiple lengths together<br />
P
custom cut / reels<br />
<strong>LED</strong>NF RGB<br />
RGB Neon Flexbrite<br />
! In any outdoor installation, all conductors must be<br />
coated with dielectric grease, and properly sealed<br />
with silicone and shrink tube.<br />
accessories<br />
<strong>LED</strong>NF-RGB-CHAN<br />
Aluminum mounting track for<br />
<strong>LED</strong>NF-RGB, 3.25 feet (1 meter)<br />
long, 15/16”W x 1-3/8”H<br />
(including RGB Neon)<br />
technical sPecifications<br />
<strong>LED</strong>-4WR-490CTRL<br />
RGB Neon Flexbrite controller, 120V<br />
Dual 6 amp output leads control up<br />
to 300 feet*, (2 x 150 feet), DMX<br />
compatible, requires 490EC kit(s)<br />
<strong>LED</strong>NF-RGB-490EC(LENGTH)<br />
RGB Neon Flexbrite controller-to-rope<br />
connector kit; available in 3’, 10’ and<br />
20’ lengths; includes power pin, end<br />
cap and shrink tube<br />
<strong>LED</strong>NF-RGB-JUMP(LENGTH)<br />
RGB Neon Flexbrite rope-to-rope<br />
extension kit; available in 3’, 10’ and<br />
20’ lengths; includes two power pins<br />
and two sections of shrink tube<br />
<strong>LED</strong>NF-RGB-CON1<br />
<strong>LED</strong>NF-RGB “Demo” controller, 1.25<br />
amps, with 5’ fused power cord, power<br />
connector, end cap and 2’ lead wire;<br />
controls up to 37.5 feet of <strong>LED</strong>NF-RGB<br />
Bill of materials<br />
Determine length needed to the nearest 17” increment<br />
For each run up to 90 feet*, order one <strong>LED</strong>-RGB-35-1/30-120<br />
For each run up to 300 feet (2 x 150’)*, order <strong>LED</strong>-4WR-<br />
490CTRL (user programmable, DMX compatible)<br />
For each controller output lead used, order one<br />
<strong>LED</strong>NF-RGB-490EC(LENGTH), required<br />
When a jumper is needed, order <strong>LED</strong>NF-RGB-JUMP(LENGTH)<br />
Order mounting track or channel for straight runs<br />
(recommended) and mounting clips as needed<br />
<strong>LED</strong>NF-RGB-CONKIT-NP<br />
6’ power cord, not fused, no plug<br />
includes power connector, end cap<br />
and 3” shrink tube, use with lighting<br />
control boards<br />
<strong>LED</strong>NF-RGB-SPL<br />
<strong>LED</strong>NF-RGB inline splice connector<br />
kit, includes 6” shrink tube and PWR<br />
<strong>LED</strong>NF-RGB-END<br />
End cap for RGB Neon Flexbrite,<br />
clear plastic<br />
<strong>LED</strong>NF-RGB-CLIP<br />
Aluminum mounting clip for<br />
<strong>LED</strong>NF-RGB; 2”L x 15/16”W x<br />
1-3/8”H (including RGB Neon);<br />
5/8” mounting screws included<br />
<strong>LED</strong>-RGB-3S-1/30-120<br />
<strong>LED</strong> RGB Neon FLexbrite 120V controller with 1-30 second adjustable fade rate and color<br />
select (stop) switch, one output lead, 3 amps, controls up to 90 feet*, c/ETL/us Listed;<br />
Requires <strong>LED</strong>NF-RGB-490EC(LENGTH), sold separately<br />
*run distances greater than reel length (81 feet) will require splicing multiple lengths together<br />
<strong>LED</strong>-4WR-PWR<br />
Power connector for <strong>LED</strong> RGB Neon<br />
Flexbrite<br />
Voltage 120V, 60hz ac operation<br />
Construction Heavy-duty flexible PVC housing with frosted PVC jacket and three parallel rows of <strong>LED</strong>s spaced every 1/2”<br />
mounting aluminum mounting clips or track<br />
Bulk reel 81 feet (see also maximum run below)<br />
dimensions h = 1-1/8”, W = 15/16”; order in custom cuts or bulk reels<br />
Cuttability Cuttable every 17” (± 1/4")<br />
Wattage 4 watts per foot<br />
maximum run 150 feet x 2 with led-4Wr-490ctrl (dual output, 6 amps each); 37.5 feet with demo controller lednf-rgB-con1 (1.25 amps)<br />
Packaging Bulk reel in white box<br />
led specs 100,000 hour rated life; 0.05- 0.07 watt, 5mm, 90° beam angle<br />
www.americanlighting.com 37
NEON FLEXBRITE PLUS<br />
with brighter <strong>LED</strong>s now more closely replicates<br />
the appearance of traditional neon! Evenly<br />
spaced superior grade, ultra bright <strong>LED</strong>s<br />
combined with a patented, oval-shaped jacket<br />
generate a bright, continuous line of light.<br />
The efficient Neon Flexbrite Plus new jacket<br />
enhances color, by night and day; and boasts a<br />
70% energy savings over traditional neon, but<br />
in a flexible, durable and non-breakable format.<br />
It produces very little heat making it ideal for<br />
coves, and other architectural details. Economy<br />
offers quality standard brightness <strong>LED</strong>s at an<br />
appealing price.<br />
1-1/8”<br />
9/16”<br />
5/8”<br />
3/8”<br />
visible<br />
am, re and ye cuttable every 29.5-30”<br />
Bl, gr and Wh cuttable every 17.5-18”<br />
Available in 7 colors, shown lighted below:<br />
0 o<br />
120 AC<br />
restaurant and Bar décor signs and casino games<br />
architectural details BacK lighting home theatres<br />
neon rePlacement coVes<br />
features<br />
• New colored jacket highlights color by night and day<br />
• Economy Neon features quality standard brightness<br />
<strong>LED</strong>s while Neon Flexbrite Plus uses superior grade<br />
ultra bright <strong>LED</strong>s for enhanced impact<br />
• Continuous line of light, <strong>LED</strong>s spaced every 1/2” for<br />
Plus version; 5/8” for Economy<br />
• Alternative to neon – flexible, durable, non-breakable<br />
• and produces very little to no heat<br />
• 70% energy savings over traditional neon<br />
• Long-lasting, average lifetime up to 100,000 hours<br />
• Patented, special oval-shaped jacket generates a bright<br />
• neon-like glow<br />
• Flexible – up to 1-1/2” bending radius<br />
• Numerous accessories and connectors facilitate a wide<br />
• variety of designs<br />
Amber Blue Green Red <strong>White</strong> <strong>Warm</strong> <strong>White</strong> Yellow<br />
P
!<br />
Bill of materials<br />
Determine length needed to the nearest cutting increment<br />
(18” for Blue, Green and <strong>White</strong>; 30” for Amber, Red and Yellow)<br />
Order an <strong>LED</strong>-NF-CONKIT or <strong>LED</strong>-NF-CONKIT-PART for each<br />
run up to 150 feet. Order one ASSEMBLY for pre-attached<br />
cord (non-rated)<br />
Order power and jumper accessories as needed<br />
Order aluminum channel or mounting track for straight<br />
runs (or cut into short pieces for use as mounting clips)<br />
In any outdoor installation, all conductors must be coated with<br />
dielectric grease, and properly sealed with silicone and shrink<br />
tube. For c/UL/us rated custom cut lengths, order <strong>LED</strong> Neon<br />
Flexbrite Plus or Economy by the foot with (1) <strong>LED</strong>-NF-CONKIT-<br />
PART for each length. Allow at least 12 weeks. Factory sealed<br />
connections are best for any outdoor applications.<br />
custom cut / reels<br />
<strong>LED</strong><br />
Neon<br />
Flexbrite<br />
NF = Economy Neon Flexbrite<br />
NFPLUS = Neon Flexbrite Plus<br />
<strong>LED</strong>-NF-LOUT<br />
<strong>LED</strong> Neon Flexbrite ‘L’<br />
connector for outside 90° angle<br />
(outside frame)<br />
<strong>LED</strong>-NF-LIN<br />
<strong>LED</strong> Neon Flexbrite ‘L’<br />
connector for inside 90° angle<br />
(inside sill)<br />
<strong>LED</strong>-NF-CHAN, <strong>LED</strong>-NF-TRACK-4<br />
1 meter <strong>LED</strong> Neon Flexbrite<br />
aluminum channel (CHAN) or 4<br />
foot grey plastic track (TRACK-4)<br />
AM = Amber RE = Red<br />
BL = Blue WH = <strong>White</strong><br />
GR = Green<br />
Note: Neon Flexbrite is sold by the reel (five <strong>LED</strong>-NF-CONKITs and 50 <strong>LED</strong>-NF-CLIPs are included) and by the foot (accessories sold separately).<br />
accessories<br />
<strong>LED</strong>-NF-CONKIT-PART<br />
Factory installed 5’ power cord with<br />
fused plug and end cap (allow 12<br />
weeks lead time), c/UL/us<br />
Additional accessories include <strong>LED</strong>-NF-JUMP3, <strong>LED</strong>-NF-JUMP10, <strong>LED</strong>-NF-JUMP20<br />
installation eXamPle<br />
Bill of materials for example above:<br />
(13.5’) <strong>LED</strong>-NFPLUS-BL<br />
(1) <strong>LED</strong>-NF-CONKIT<br />
(1) <strong>LED</strong>-NF-TRACK (cut into 2” pieces to make ‘clips’)<br />
WW = <strong>Warm</strong> <strong>White</strong><br />
YE = Yellow<br />
<strong>LED</strong>-NF-CONKIT<br />
5’ Power cord with fused plug, 4A<br />
inverter, power connector, 4”<br />
section of shrink tube and end cap<br />
<strong>LED</strong>-NF-L, <strong>LED</strong>-NF-T, <strong>LED</strong>-NF-X<br />
Various accessories include<br />
L, T, X connector<br />
<strong>LED</strong>-NF-SPL<br />
<strong>LED</strong> Neon Flexbrite in-line splice<br />
connector; Includes 6” shrink tube<br />
<strong>LED</strong>-NF-END<br />
<strong>LED</strong> Neon Flexbrite end cap, clear<br />
<strong>LED</strong>-NF-CLIP<br />
Aluminum mounting clip; 5/8”<br />
mounting screws included<br />
technical sPecifications<br />
Voltage 120V, 60hz ac operation<br />
Construction Heavy-duty flexible colored or frosted PVC jacket with PVC jacket and 5mm <strong>LED</strong>s spaced every 1/2” for Neon Flexbrite Plus;<br />
every 5/8” for economy neon flexbrite<br />
mounting clear plastic mounting track or aluminum mounting channel or clips<br />
Bulk reel 150 feet<br />
dimensions h = 1-1/8” (visible, illuminated portion at top is 3/8” tall), W = 9/16”; order in custom cuts or bulk reels<br />
cuttability am, re and ye cuttable every 29.5-30”; Bl, gr, Wh and WW cuttable every 17.5-18”<br />
Wattage economy: am, re and ye = .96 watt per foot; Bl, gr and Wh = 1.2 watts per foot;<br />
neon flexbrite Plus: am, re and ye = 1.2 watts per foot; Bl, gr, Wh and WW = 1.6 watts per foot<br />
maximum run 150 feet<br />
Packaging Bulk reels and custom cuts (contact factory for lead time on ul listed custom cuts)<br />
led specs 100,000 hour rated life for all colors except <strong>White</strong> (50,000 hours); 0.05 - 0.07 watt, 5mm, 120° beam angle<br />
dimmers not dimmable<br />
www.americanlighting.com 39
1/8”<br />
<strong>LED</strong> 4-WIRE RGB provides even,<br />
bright and dynamic color changing linear effect<br />
lighting. This unique product contains red, blue,<br />
and green lamps with fade rate, color select, and<br />
DMX compatibility. Available in 24V and 120V<br />
versions to accommodate any job – no matter<br />
how big or small! Ideal for restaurants, night<br />
clubs, store fronts, or anywhere eye-catching<br />
lighting effects are needed. Also available<br />
in Ultra <strong>Warm</strong> <strong>White</strong> and Cool <strong>White</strong> (see<br />
pages 42-43).<br />
7/16”<br />
7/8”<br />
7/16”<br />
0 o<br />
40 www.americanlighting.com<br />
120 AC<br />
restaurant and Bar décor signs and casino games<br />
architectural details BacK lighting<br />
home theatres coVes<br />
features<br />
• Even and bright color changing effect lighting<br />
• Long life <strong>LED</strong>s last up to 100,000 hours<br />
• Available in 24V and 120V<br />
• Easy to install<br />
• Order in either 295 foot bulk reels or custom cut pieces<br />
• Energy efficient – consumes a maximum of 2.22<br />
• watts per foot<br />
• Create long runs (up to 295 feet)<br />
• Controllers offer crossfades with speed control, and<br />
• color select<br />
• DMX controllers available for both 24V and 120V<br />
applications<br />
24<br />
DC<br />
P<br />
H
custom cut / reels<br />
<strong>LED</strong>-4WR<br />
<strong>LED</strong><br />
4-Wire<br />
(RGB Series)<br />
accessories<br />
RGB = 120V RGB<br />
RGB-24 = 24V RGB<br />
! In any outdoor installation, all conductors must be<br />
coated with dielectric grease, and properly sealed<br />
with silicone and shrink tube.<br />
<strong>LED</strong>-4WR-490CTRL<br />
<strong>LED</strong> 4-Wire RGB controller, 120V<br />
Dual 6 amp output leads control up<br />
to 300 feet*, (2 x 150 feet), DMX<br />
compatible, requires 490EC kit(s)<br />
<strong>LED</strong>-RGB-3S-1/30-120<br />
120V controller with 1-30 second<br />
adjustable fade rate and color select<br />
(stop) switch 3 amps, controls up to<br />
150 feet, c/ETL/us Listed<br />
<strong>LED</strong>-4WR-6-1/10-120<br />
120V controller controls up to 295<br />
ft with continuous fade (1-10 sec.),<br />
6 amps, c/ETL/us<br />
<strong>LED</strong>-4WR-490EC(LENGTH)<br />
<strong>LED</strong> 4-Wire rope-to-controller connector<br />
kit available in 3', 10' and<br />
20' lengths; includes power pin,<br />
end cap and shrink tube, required<br />
<strong>LED</strong>-4WR-490CTRL-24V<br />
Dual output controller/DMX<br />
interface with adjustable effects<br />
and prests; connects to<br />
<strong>LED</strong>-4WR-490CTRL-24P;<br />
DMX in and DMS out leads<br />
technical sPecifications<br />
Bill of materials<br />
Determine length needed to the nearest increment<br />
(13” for 24V or 39” for 120V)<br />
For 24V product, consider location and layout for power<br />
supplies and runs; determine total watts and order<br />
magnetic transformer(s) or <strong>LED</strong> driver(s) to cover load<br />
Determine type of controller(s) needed for application<br />
For each controller, order one <strong>LED</strong>-4WR-PWR, one<br />
<strong>LED</strong>-4WR-END and 490EC adapter cable<br />
Consider whether jumpers (between rope light sections)<br />
will be needed<br />
Order mounting track or channel for straight runs<br />
(recommended) and mounting clips as needed<br />
DMX-HD<br />
Hardwire interface box with software<br />
for MAC and PC and adapter<br />
cable; USB connects to dedicated PC,<br />
RC232 connects to DMX-HD<br />
<strong>LED</strong>-4WR-3S-1/10-24<br />
24V DC Fade controller; speed<br />
control and color stop; use with<br />
<strong>LED</strong>-TR power supply only<br />
TR Series, <strong>LED</strong>-TR Series<br />
Magnectic transformer (24V) or<br />
magnetic driver (24V DC) enclosed,<br />
rated for outdoor use, c/UL/us Listed<br />
<strong>LED</strong>-DR-24, <strong>LED</strong>-DR60-24<br />
Hardwire 24V DV <strong>LED</strong> drivers<br />
watts, c/UR/us Recognized<br />
<strong>LED</strong>-4WR-490CTRL-24P<br />
24V DC power supply for use with<br />
<strong>LED</strong>-4WR-490CTRL-24V; up tp<br />
98’4” combined with max run; five<br />
foot grounded 120V AC power cord<br />
and 24V DC output<br />
Additional accessories include: <strong>LED</strong>-4WR-TRACK = 4 foot plastic mounting track, <strong>LED</strong>-4WR-CHAN = "J" shaped aluminum mouting<br />
extrustion, <strong>LED</strong>-4WR-CLIP = clear plastic mounting clip, <strong>LED</strong>-4WR-JUMP3, JUMP10, JUMP20 = rope to rope extension kit in 3', 10', 20'<br />
lengths, <strong>LED</strong>-4WR-PWR = power connector, <strong>LED</strong>-4WR-END = clear rectangular end cap, LW36-XLR3, LW36-XLR3-15 = DMX extension<br />
cable(s), <strong>LED</strong>-4WR-INVSPL = splice connector for joining two sections together<br />
Voltage 24V dc and 120V, 60hz ac operation<br />
construction rectangular-shaped clear PVc housing with three parallel rows of 3mm leds staggered by 3/8”<br />
Mounting Clear plastic mounting clips (mounting screws included) and 4' track, and 4' aluminum mounting channel<br />
(see additional accessories noted above)<br />
Bulk reel 295 feet (*run distances greater than 295 feet exceed the bulk reel length)<br />
dimensions h = 7/16”, W = 7/8”; order in custom cuts or bulk reels<br />
cuttability 24V version is cuttable every 13”; 120V version is cuttable every 39”<br />
Wattage Power consumption will vary with the maximum being 2.22 watts per foot<br />
maximum run see controller capability chart above<br />
Packaging Bulk reel in white box<br />
led specs 100,000 hours, red: .05 watt, 2.5V, green: .07 watt, 3.5V, Blue: .05 watt, 3.5V; 120° beam angle; 20ma, 3mm<br />
dimmers not dimmable<br />
dmX led-4Wr-490ctrl is compatible with usitt (esta) standard dmX 512 software<br />
www.americanlighting.com 41
<strong>LED</strong> 4-WIRE available in Cool <strong>White</strong><br />
and Ultra <strong>Warm</strong> <strong>White</strong>, provides a bright and<br />
uniform linear light. The long life <strong>LED</strong>s – rated<br />
up to 60,000 hours – emit no harmful ultraviolet<br />
(UV) rays and operate cool to the touch. Each<br />
<strong>LED</strong> 4-Wire product consumes a mere 2.22<br />
watts per foot, which is a 92% energy savings<br />
over traditional incandescent linear light. <strong>LED</strong><br />
4-Wire is offered in either 24V or 120V versions<br />
to accommodate most linear lighting projects.<br />
1/8”<br />
7/16”<br />
7/8”<br />
7/16”<br />
0 o<br />
42 www.americanlighting.com<br />
120 AC<br />
24<br />
restaurant and Bar décor signs and casino games<br />
architectural details BacK lighting home theatres<br />
neon rePlacement coVes<br />
features<br />
• Three parallel rows of <strong>LED</strong>s staggered by 3/8” produce<br />
bright and even light output<br />
• Easy to install – 120V power cord plugs into standard<br />
receptacle<br />
• Create long runs (up to 200 feet for 120V) with energy<br />
saving <strong>LED</strong> lighting<br />
• Even and bright linear effect lighting that uses only 2.22<br />
• watts per foot<br />
• Produces virtually no heat for maximum safety<br />
• Long life <strong>LED</strong>s last up to 60,000 hours<br />
• Cuttable in increments of 6.5” for 24V and 39” for 120V<br />
• Available in 150 foot bulk reels and custom cuts<br />
DC<br />
P<br />
H
Bill of materials<br />
Determine length needed to the nearest increment<br />
(approximately 6.5” for 24V or 39” for 120V)<br />
For 24V product, consider location and layout for power<br />
supplies and runs; determine total watts and order<br />
magnetic driver or <strong>LED</strong> power supplies to cover load<br />
For each run, order one <strong>LED</strong>-4WR-CONKIT (or -NP for 24V)<br />
Consider where jumpers (between rope light sections)<br />
and extensions (from controller to rope) will be needed<br />
Order mounting track or channel for straight runs<br />
(recommended) and mounting clips as needed<br />
!<br />
In any outdoor installation, all conductors must be coated with<br />
dielectric grease, and properly sealed with silicone and shrink tube.<br />
custom cut / reels<br />
<strong>LED</strong>-4WR<br />
<strong>LED</strong> 4-Wire<br />
(<strong>White</strong> Series)<br />
accessories<br />
<strong>LED</strong>-4WR-CONKIT<br />
5’ Power cord for 120V 4-Wire, with<br />
1.6 amp inverter, power connector<br />
and end cap; for runs up to 200 feet<br />
<strong>LED</strong>-4WR-JUMP(LENGTH)<br />
<strong>LED</strong> 4-Wire rope-to-rope extension<br />
kit; available in 3’, 10’ and 20’ lengths;<br />
includes two power pins and two<br />
sections of shrink tube<br />
<strong>LED</strong>-TR series, <strong>LED</strong>-DR series<br />
Various 24V DC power supplies for<br />
<strong>LED</strong> loads; see page 83 for details<br />
and options<br />
technical sPecifications<br />
CW = Cool <strong>White</strong>, 120V<br />
UWW = Ultra <strong>Warm</strong> <strong>White</strong>, 120V<br />
CW-24 = Cool <strong>White</strong>, 24V<br />
UWW-24 = Ultra <strong>Warm</strong> <strong>White</strong>, 24V<br />
<strong>LED</strong>-4WR-TRACK, <strong>LED</strong>-4WR-CHAN<br />
<strong>LED</strong> 4-Wire clear plastic mounting<br />
track (TRACK) or aluminum channel<br />
(CHAN), sold in 4 foot pieces<br />
installation eXamPle<br />
Bill of materials for example above:<br />
(84.5” + 26” + 97.5”)* <strong>LED</strong>-4WR-UWW-24<br />
(1) <strong>LED</strong>-TR-60-24 (17.3 ft x 2.22 w/ft = 38.4 watts)<br />
(3) <strong>LED</strong>-4WR-CONKIT-NP-1.6A<br />
(5) <strong>LED</strong>-4WR-TRACK<br />
*<br />
If possible, order 24V custom cuts specifying each length<br />
and we will make the precise cuts for you. Otherwise order<br />
6.54” extra for each piece to allow for field cutting errors.<br />
<strong>LED</strong>-4WR-CONKIT-NP-1.6A, -4A<br />
5’ Power cord for 24V 4-Wire, with<br />
1.6 amp (NP) or 4A (-NP-4A) inverter,<br />
power connector and end cap; see<br />
maximum run below<br />
<strong>LED</strong>-4WR-INVSPL<br />
<strong>LED</strong> 4-Wire splice connector with<br />
shrink tube for joining two 4-Wire<br />
sections together<br />
<strong>LED</strong>-4WR-PWR, <strong>LED</strong>-4WR-END<br />
Power connector and end cap for<br />
<strong>LED</strong> 4-Wire<br />
<strong>LED</strong>-4WR-CLIP<br />
<strong>LED</strong> 4-Wire clear mounting clip with<br />
5/8" length mounting screws<br />
Voltage 24V and 120V, 60hz ac operation<br />
Construction Rectangular-shaped profile clear PVC housing with three parallel rows of 3mm <strong>LED</strong>s staggered by 3/8”<br />
Mounting Clear plastic mounting clips (mounting screws included) and 4' track, and 4' aluminum mounting channel<br />
Bulk reel 295 feet<br />
dimensions h = 7/16”, W = 7/8”; order in custom cuts or bulk reels<br />
cuttability cW-24 and uWW-24 cuttable every 6.5” ±1/8”; cW and uWW cuttable every 3.25 feet (39” ±1/4”)<br />
Wattage 2.22 watts per foot<br />
maximum run 200 feet for 120V; 42.8 feet for 24V when used with led-4Wr-conKit-nP-4a, 16.8 feet with led-4Wr-conKit-nP<br />
Packaging Bulk reel in white box<br />
led specs 60,000 hours, .067 watt, 1.11V, 60ma, 3mm, 120° beam angle; uWW (2700°K) cri=73; cW (6400°K) cri=80<br />
dimmers 24V is dimmable with most low voltage magnetic dimmers when used in conjunction with led-tr series within 40-80%;<br />
120V is dimmable with most standard incandescent dimmers<br />
90”<br />
100”<br />
27”<br />
www.americanlighting.com 43
1/4”<br />
11/16”<br />
The <strong>LED</strong> BANDOLIER is<br />
compact, waterproof, highly bendable and<br />
multi-functional. Linkable light strings, in either<br />
13” or 39” lengths, can be connected together<br />
for energy efficient cove lighting, backsplashes,<br />
bars, display cases and more. The low voltage,<br />
low maintenance waterproof design allows<br />
tight and even “hairpin” turns making it ideal<br />
for sign lighting, especially channel letter lights,<br />
offering a bright, even and safe lighting solution.<br />
<strong>LED</strong> Bandolier boasts six vibrant colors, two<br />
convenient lengths, and interconnectable DC<br />
jacks to accommodate any lighting project.<br />
3/16”<br />
1/4”<br />
3/8”<br />
11/16”<br />
44 www.americanlighting.com<br />
12<br />
DC P/H<br />
restaurant and Bar décor signs and casino games<br />
architectural details BacK lighting home theatres<br />
neon rePlacement coVes<br />
features<br />
• Small size waterproof <strong>LED</strong> source with high light output<br />
• Ultra flexible housing bends up to 180°!<br />
• Linkable sets with DC connectors allow you to easily build<br />
• your own system<br />
3/8”<br />
• Select from two string lengths that are cuttable<br />
• every 3 <strong>LED</strong>s<br />
• Long life, low maintenance linear lighting (up to<br />
• 100,000 hours)<br />
• Six bright colors to choose from including 4000°K and<br />
• 6400°K <strong>White</strong> light<br />
• Choose from hardwire and plug-in power supplies
light strings<br />
<strong>LED</strong>B<br />
<strong>LED</strong><br />
Bandolier<br />
accessories<br />
33 = 13” length<br />
99 = 39” length<br />
<strong>LED</strong>-DR-12<br />
Hardwire <strong>LED</strong> driver, 12V DC<br />
1-25 watts<br />
6-1/4”L x 1-1/4”W x 1-13/16”H<br />
c/UR/us Recognized<br />
<strong>LED</strong>-DR60-12<br />
Hardwire <strong>LED</strong> driver, 12V DC<br />
7-13/16”L x 1-3/4”W x 1-5/8”H<br />
c/UR/us Recognized; 1-60 watts<br />
Enclosure (ENCL-11) sold separately<br />
PS-(WATTAGE)-12VPI<br />
Plug-in power supply, 12V DC<br />
18, 36 and 60 watt capacities<br />
available, c/UL/us Listed<br />
technical sPecifications<br />
BL = Blue<br />
GR = Green<br />
RE = Red<br />
WH = Cool <strong>White</strong><br />
(6400°K)<br />
WW = <strong>Warm</strong> <strong>White</strong><br />
(4000°K)<br />
YE = Yellow<br />
<strong>LED</strong>-TR-____-12<br />
12V DC power supply; Specify 30,<br />
60, 100 or 150 watts; 40% minimum<br />
load; dimmable with low voltage<br />
magnetic dimmers, c/UL/us<br />
Bill of materials<br />
Determine length of light needed<br />
Break total length into runs that do not exceed 16'3"<br />
(495 <strong>LED</strong>s)<br />
Order Bandolier light strings to equal total length<br />
Order power supplies with appropriate capacity<br />
Order mounting track for straight runs<br />
(recommended) and mounting clips as needed<br />
<strong>LED</strong> color temperatures vary up to 10% between<br />
shipments. In order to ensure Bandolier strings are from<br />
the same shipment, it is highly recommended that WH or<br />
WW colors are not intermixed between 33- and 99-light<br />
strings sets.<br />
<strong>LED</strong>B-CHAN<br />
Mounting extrusion, aluminum<br />
"J" shape shields direct view<br />
48”L x 3/8”W x 1”H<br />
<strong>LED</strong>NF-M-TRACK<br />
Mounting track, grey PVC<br />
48”L x 7/16”W x 5/8”H<br />
RCA-EX24<br />
24” extension between sets or<br />
from power supply to first set<br />
RCA-Y<br />
'Y' extension for linking multiple<br />
sets, can be used with RCA-EX24<br />
<strong>LED</strong>B-CLIP<br />
Mounting clips for holding <strong>LED</strong><br />
Bandolier in a vertical position;<br />
features mounting hole and<br />
adhesive strip<br />
Voltage 12V dc operation<br />
construction copper strip conductors interconnect the leds in series parallel fashion inside machine-molded silica gel housing<br />
Mounting Adhesive mounting clips, grey PVC mounting track and "J" shaped aluminum mounting extrusion<br />
dimensions h = 11/16”, W = 1/4”; available lengths: 33-light strings are 13-1/4” of light, 99-light strings are 39-1/8” of light<br />
Wattages 33-light strings = 2.64 watts; 99-light strings = 7.92 watts<br />
maximum run 495 leds (approximately 16’ 4” of light)<br />
Packaging Bulk<br />
led specs 100,000 hours for re, Bl, gr and ye; 60,000 hours for cW and WW; each 3 mm led is .08 watt; 30° beam angle<br />
Kelvin temperatures may not match from string to string; for best results, do not intermix 33- and 99-light sets in same installation<br />
dimmers not dimmable<br />
diffuser frosted PVc lens cover<br />
!<br />
www.americanlighting.com 45
LINEAR ACCENT SERIES<br />
provides bright white light that is dimmable<br />
whether using long life <strong>LED</strong> festoon or<br />
conventional xenon lamps. The sockets are<br />
equipped with a built-in specular reflector<br />
to optimize light output. Easily install your<br />
choice of lamps by simply snapping them into<br />
pre-assembled wire and sockets. 3, 4, or 6 inch<br />
socket spacing options and the ability to field<br />
cut to your exact specifications make the Linear<br />
Accent Series a popular and convenient lighting<br />
solution for many lighting needs.<br />
2-5/16”<br />
Xenon lamp in socket<br />
2-5/16”<br />
led festoon in socket<br />
7/8”<br />
7/8”<br />
46 www.americanlighting.com<br />
15/16”<br />
15/16”<br />
features<br />
• Bright white linear light that is still field cuttable while<br />
maintaining c/UL/us safety 15/16” rating!<br />
• Lamps available in Ultra <strong>Warm</strong> <strong>White</strong> (2700°K <strong>LED</strong>)<br />
• and xenon<br />
2-5/16”<br />
12<br />
24<br />
AC P/H<br />
coVes soffits oVer caBinets under caBinets<br />
recePtion areas disPlay cases sign lighting<br />
architectural Built-ins BacK lighting<br />
• Long life, low maintenance 7/8” <strong>LED</strong> festoons rated up to<br />
60,000 hours<br />
• Choose from 12V or 24V lamps<br />
• Dimmable with most standard incandescent dimmers<br />
• Built-in specular reflector optimizes light output<br />
• Pre-assembled lamp holders at set spacing saves time<br />
on the job site<br />
• No clips required – socket bases have mounting holes<br />
• Easy installation – sockets snap into track for<br />
straight-line applications
custom cut / reels maXimum single run distance<br />
FSL<br />
Linear<br />
Accent<br />
Series<br />
accessories<br />
3 = 3” spacing<br />
4 = 4” spacing<br />
6 = 6” spacing<br />
FSL-WW-12, FSL-WW-24<br />
<strong>LED</strong> Festoon, 12V or 24V, 0.82 watt,<br />
<strong>LED</strong>-DR12-350<br />
2700°K <strong>White</strong>, M.O.L. = 1-5/8”<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver Class 2, 1-12 watts,<br />
6-5/8”L FSL-5-12, x 1-1/2”W FSL-10-12, x 1-3/16”H FSL-5-24,<br />
c/UR/us FSL-10-24 Recognized<br />
Xenon, 12V, 5 watt, Clear<br />
Xenon, 12V, 10 watt, Clear<br />
Xenon, 24V, 5 watt, Clear<br />
Xenon, 24V, 10watt, Clear<br />
FSL-5F-12, FSL-10F-12, FSL-5F-24,<br />
FSL-10F-24<br />
Xenon, 12V, 5 watt, Frosted<br />
Xenon, 12V, 10 watt, Frosted<br />
Xenon, 24V, 5 watt, Frosted<br />
Xenon, 24V, 10watt, Frosted<br />
MR-11-12-20, MR-11-24-20,<br />
MR/11/16A<br />
Halogen MR-11. 12V or 24V, 20<br />
watts with glass lens/bulb cover<br />
Use with MR-11/16A swivel socket<br />
attachment<br />
technical sPecifications<br />
TRE SERIES<br />
Electronic transformer, enclosed<br />
12V or 24V, dimmable, auto reset,<br />
circuit protection, 150 watts and 300<br />
watts; For runs up to ten feet only,<br />
c/UL/us Listed<br />
FSL-BOX<br />
Junction box for connector block<br />
FSL-BLK<br />
Connector block, 2 wire, 12 AWG<br />
max, 20 amps max<br />
FSL-TRK-3<br />
Three foot plastic mounting track,<br />
ivory<br />
FSL-CABLE<br />
Linear Accent Series lead wire, 12<br />
gauge wire, ivory<br />
FSL-END<br />
End cap for end of run<br />
FSL-COVER<br />
Clear plastic snap-on lamp cover<br />
Use with five watt lamps only!!<br />
TR SERIES<br />
Magnetic transformer, enclosed 12V<br />
or 24V, dimmable, with multiple<br />
knockouts and boost tap, c/UL/us<br />
Voltage 12V or 24V, 60hz ac or dc operation<br />
Construction Heavy-duty plastic festoon-based sockets with aluminum reflectors pre-attached to 12AWG wire (copper stranded)<br />
mounting mounting holes in socket base with appropriate fasteners (not included) or plastic mounting track<br />
Bulk reel 100 feet<br />
dimensions h = 1” (with lamp installed), W = 7/8” (base of socket); order custom cuts or bulk reels<br />
cuttability anywhere<br />
Wattages choose from 5 or 10 watt xenon or 0.82 watt leds<br />
switching hardwire installations require a switch leg to the primary side of the transformer<br />
maximum run 240 watts maximum for 12V systems; 480 watts maximum for 24V systems<br />
Packaging <strong>White</strong> box<br />
lamp specs 20,000 hours, festoon base, 12V or 24V, frosted (2550°K) or clear (2650°K), 1-11/16” m.o.l.<br />
<strong>LED</strong> specs 60,000 hours, Festoon base, 12V or 24V, 2700˚K, 1-11/16” M.O.L., .82 watt<br />
dimmers compatible with most standard incandescent dimmers<br />
diffuser lens covers (fsl-coVer) sold separately<br />
5 watt<br />
10 watt<br />
12V<br />
24V<br />
12V <strong>LED</strong><br />
24V <strong>LED</strong><br />
12 feet<br />
24 feet<br />
72 feet<br />
3"<br />
6 feet<br />
12 feet<br />
*100 feet<br />
16 feet<br />
32 feet<br />
96 feet<br />
4" 5"<br />
8 feet<br />
16 feet<br />
*100 feet<br />
24 feet<br />
48 feet<br />
*100 feet<br />
12 feet<br />
24 feet<br />
*100 feet<br />
*12V or 24V <strong>LED</strong> festoon quantity determined by 100 foot maximum reel length.<br />
www.americanlighting.com 47
features<br />
• Custom manufactured to your exact specifications<br />
• Suitable for indoor and outdoor applications*<br />
• Premium quality incandescent lamps and <strong>LED</strong>s<br />
offer reliable, low maintenance service<br />
• Compatible with durable aluminum and plastic<br />
extrusions for flood and step applications<br />
• Long life <strong>LED</strong>s last up to 60,000 hours and<br />
incandescent lamps last up to 40,000 hours<br />
• Incandescent Crystal Tube Light is dimmable<br />
• Semi-flexible polycarbonate tube can follow<br />
curved steps<br />
mounting accessories<br />
CS<br />
Carpeted Step<br />
custom<br />
ST-1003<br />
Crystal<br />
Tube LIght<br />
ST-<strong>LED</strong>-1003<br />
12V <strong>LED</strong><br />
Crystal<br />
Tube LIght<br />
PU<br />
Plastic Channel<br />
Custom Spacing 12 = 12V<br />
24 = 24V<br />
technical sPecifications<br />
PC<br />
Poured Concrete<br />
STMC-1<br />
Mounting Clip<br />
Custom Spacing WW = 2800oK <strong>White</strong><br />
CW = 6400oK <strong>White</strong><br />
12<br />
24<br />
AC P/H<br />
P/H<br />
stair safety corridor lighting decKs gaZeBos<br />
home theatres loBBies emergency lighting<br />
Bill of materials<br />
Voltage 12V or 24V ac, 50/60hz operation (for incandescent); 12V dc only (for led)<br />
Construction Clear polycarbonate tube with internal copper conductors made per specifications<br />
mounting Please see mounting accessories above<br />
dimensions h = 1/4”, W = 5/16”; order custom built length(s)<br />
lead wires 18” 22 aWg standard; specify longer length if required, up to 48”<br />
Cuttability Not field cuttable!<br />
switching use switched outlet to control on/off functions<br />
Wattage .5 watt per lamp per incandescent lamp; .25 watt per led<br />
maximum run incandescent: 120 lamps for 24V, 72 lamps for 12V; st-led-1003: 144 leds<br />
Packaging carton<br />
Linking Per specifications<br />
dimmers st-1003 is dimmable with most standard incandescent dimmers; st-led-1003 is not dimmable<br />
lamp specs 12V or 24V, .5 watt, 70ma lamps, 2600°K<br />
led specs 60,000 hour rated life, 12V dc, 0.25 watts, 20ma, 6400°K or 2800°K <strong>White</strong><br />
Diffuser Semi-flexible clear polycarbonate tube<br />
48 www.americanlighting.com<br />
led<br />
12<br />
DC<br />
Determine type of mounting<br />
Order and install extrusion<br />
Determine best voltage (incandescent only)<br />
Measure space and draw layout<br />
Determine color temperature (<strong>LED</strong> only)<br />
Order Crystal Tube Light* (send drawing if possible)<br />
Determine total wattage and power location<br />
Order TR Series transformer(s) for incandescent style<br />
(either 12V or 24V) or <strong>LED</strong>-TR Series 12V DC driver(s)<br />
for ST-<strong>LED</strong>-1003 only. See page 83 for details.<br />
*Crystal Tube Light is water-resistant, however, for any<br />
outdoor installation, factory recommends the use of<br />
clear gel fill (sold separately). Please contact factory to<br />
coordinate.
features<br />
• Low profile linear lighting system with 1" <strong>LED</strong><br />
spacing<br />
• Save 85-90% in energy costs over incandescent<br />
linear lighting<br />
• Cuttable 12V system adds design flexibility<br />
• Compatible with various durable aluminum and<br />
plastic extrusions for floor and step applications<br />
• Long life <strong>LED</strong>s last up to 100,000 hours<br />
(depending on color)<br />
• Ultra-flexible PVC housing with six different color<br />
<strong>LED</strong> options<br />
Bill of materials<br />
Determine length of area to be lighted<br />
Divide into runs up to 20 feet or 40 feet (depending<br />
on color)<br />
Determine total wattage and power location<br />
Order driver(s) or magnetic transformer(s)<br />
Order length(s) of <strong>LED</strong> Mini 2-Wire<br />
Order clips (<strong>LED</strong>-MDF-CLIP), track (<strong>LED</strong>-MDF-TRACK-4)<br />
or extrusion (see facing page) best suited to application<br />
custom cut / reels<br />
<strong>LED</strong>-MDF-12V<br />
<strong>LED</strong><br />
Mini 2-Wire<br />
5/16”<br />
1/4”<br />
0 o<br />
AM = Amber<br />
BL = Blue<br />
GR = Green<br />
RE = Red<br />
WH = <strong>White</strong><br />
YE = Yellow<br />
Additional accessories include: <strong>LED</strong>-MDF-SPL = splice kit,<br />
<strong>LED</strong>-MDF-CAP = clear end cap, <strong>LED</strong>-MDF-TRACK-4 = 4' plastic<br />
track, <strong>LED</strong>-MDF-CLIP = clear plastic mounting clip with screws;<br />
<strong>LED</strong>-MDF-L, <strong>LED</strong>-MDF-T and <strong>LED</strong>-MDF-X = "L", "T" and "X"<br />
connector kits.<br />
technical sPecifications<br />
12<br />
aisles stair safety corrridor lighting<br />
accessories<br />
decKs gaZeBos home theatres<br />
loBBies emergency lighting<br />
<strong>LED</strong>-MDF-CONKIT-NP<br />
Power cord connector kit with invertor<br />
on cord; (24V power supply required,<br />
sold separately)<br />
H<br />
<strong>LED</strong>-DR-12<br />
Hardwire 12V DC <strong>LED</strong> driver 1-25 watts,<br />
enclosed, c/UR/us Rocognized<br />
<strong>LED</strong>-DR60-12<br />
Hardwire 12V DC <strong>LED</strong> driver 1-60 watts,<br />
not enclosed, c/UR/us Rocognized<br />
<strong>LED</strong>-TR Series, TR Series<br />
Magnetic transformer, enclosed 12V or<br />
24V, dimmable, multiple knockouts and<br />
boost tap, see page 83 for more details<br />
and available wattages, c/UL/us Listed<br />
Voltage 12V ac operation (power cord includes required ac/dc inverter)<br />
construction clear PVc housing with leds spaced every 1” in series parallel fashion<br />
Mounting Clear plastic mounting clips (mounting screws included) and 4' mounting track<br />
Bulk reel 150 feet<br />
dimensions h = 1/4”, W = 5/16”; order in bulk reels or custom cuts<br />
cuttability am, re and ye cuttable every 6”; Bl, gr and Wh cuttable every 3”<br />
switching use switched outlet to control on/off functions<br />
Wattage am, re and ye = .48 watt per foot; Bl, gr and Wh = .96 watt per foot<br />
maximum run 20 feet for Bl, gr and Wh; 40 feet for am, re and ye<br />
Packaging <strong>White</strong> box or carton<br />
led specs 60,000 hour rated life, 12V dc, red, yellow and orange: 1.9 - 2.3V; green, Blue and 6400°K <strong>White</strong>: 2.8 - 3.5V; 20ma<br />
dimmers dimmable with most standard incandescent dimmers when used in conjunction with american lighting’s magnetic transformers<br />
Diffuser Clear PVC jacket, 150˚ beam angle<br />
www.americanlighting.com 49
<strong>LED</strong> FLEXBRITE CUSTOM<br />
cut is a vibrant, long lasting and cost effective<br />
alternative to traditional incandescent rope<br />
light consuming 85% less energy and lasting 3<br />
to 5 times longer (up to 100,000 hours average<br />
life). This linear lighting product uses the highest<br />
grade PVC available with a UV inhibitor to help<br />
ensure the longevity of the rope light. Order <strong>LED</strong><br />
Flexbrite in custom cut pieces to the nearest<br />
cutting increment to ensure UL2388 compliance.<br />
<strong>American</strong> <strong>Lighting</strong> is certified to make custom cut<br />
lengths at our factory for your convenience and<br />
code compliance needs.<br />
15/16”<br />
Dia.<br />
3”<br />
Factory assembled connector<br />
Amber(AM) Blue (BL) Cool <strong>White</strong> (CW) Green (GR) Red (RE) Ultra <strong>Warm</strong> <strong>White</strong><br />
(UWW)<br />
50 www.americanlighting.com<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
features<br />
• Indoor/Outdoor rated<br />
• Cost effective lighting for a variety of applications<br />
• Produces virtually no heat for maximum safety<br />
• Power cord and end cap connections are made at the<br />
factory per order for UL compliance<br />
• Order to the nearest cutting increment – every 36” for<br />
Blue, Green, Cool <strong>White</strong> and Ultra <strong>Warm</strong> <strong>White</strong>; 60” for<br />
Amber, Red and Yellow<br />
• Highest quality PVC with UV inhibitor to maximize life<br />
and performance<br />
Yellow (YE)<br />
120 AC<br />
P
custom cut<br />
ULRL-<strong>LED</strong><br />
UL2388<br />
<strong>LED</strong><br />
Flexbrite<br />
accessories<br />
ULRL-CONKIT-<strong>LED</strong>SHELL<br />
UL Listed factory-assembled<br />
connector kit for use with<br />
CUSTOM CUT 120V 1/2”<br />
Rope Light only<br />
DL-CLIP/SCREW<br />
Clear “U” shaped mounting clip<br />
that securely holds rope light in<br />
place<br />
DL-TRACK-4<br />
Four foot clear mounting track<br />
with UV rating for outdoors;<br />
recommended for use with<br />
straight line installations<br />
for non-rated custom cut 12V led flexbrite, order led-dl-Wh-12V<br />
(6400°K <strong>White</strong>) or led-dl-uWW-12V (2700°K <strong>White</strong>). Bulk reel<br />
length is 150 feet; maximum single run is 30 feet; .77 watt/foot.<br />
use with led-dl-conKit-nP and 12V dc power supply, such<br />
as led-dr-12. compatible with most rope light accessories on<br />
page 61.<br />
technical sPecifications<br />
AM-CC = Amber<br />
BL-CC = Blue<br />
CW-CC = Cool <strong>White</strong><br />
GR-CC =Green<br />
RE-CC = Red<br />
UWW-CC = Ultra <strong>Warm</strong> <strong>White</strong><br />
YE-CC = Yellow<br />
Bill of materials<br />
Determine length needed to the nearest cutting<br />
increment (3’ for Blue, Cool <strong>White</strong>, Green and Ultra<br />
<strong>Warm</strong> <strong>White</strong>; 5’ for Amber, Red and Yellow)<br />
Order one ULRL-CONKIT-<strong>LED</strong>SHELL for each<br />
non-extendable run up to 150 feet<br />
Order mounting track for straight runs (recommended)<br />
and mounting clips as needed<br />
Voltage 120V, 60hz ac operation (1.6a inverter converts ac to dc)<br />
construction heat resistant clear PVc housing with leds every 1”, vertical mount<br />
mounting Plastic mounting clips or track<br />
dimensions 1/2” diameter<br />
cuttability Bl, cW, gr and uWW cuttable every 3 feet; am, re and ye cuttable every 5 feet<br />
Wattages Bl, cW, gr and uWW = 0.77 watt per foot; am, re and ye = 0.47 watt per foot<br />
maximum run 150 feet<br />
switching Provide switched outlet for on/off and dimming control<br />
linking custom cuts are not linkable. cutting, splicing or repairing led flexbrite custom cuts voids the ul2388 rating<br />
Packaging carton and/or polybag<br />
led specs 60,000 hours average led life (cW and uWW); 100,000 hours average led life for all other colors<br />
dimmers dimmable with most standard incandescent, low voltage magnetic and low voltage electronic dimmers<br />
diffuser clear PVc jacket<br />
www.americanlighting.com 51
1-1/4”<br />
Dia.<br />
The <strong>LED</strong> FLEXBRITE KITS<br />
available in both Cool <strong>White</strong> and Ultra <strong>Warm</strong><br />
<strong>White</strong>, interconnect without the use of tools<br />
making them a convenient choice for quick<br />
installations. <strong>LED</strong> Flexbrite Kits last 3 to 5 times<br />
longer (up to 100,000 hours average life) than<br />
incandescent rope and do not build up heat.<br />
This linear lighting product uses the highest<br />
grade PVC available with a newly developed<br />
UV inhibitor to help ensure its longevity. <strong>LED</strong><br />
FlexbriteKits, packaged for retail display, include<br />
attached power cord and end cap (these are<br />
removable for interconnecting multiples) and<br />
mounting clips (one per foot of Flexbrite). Track<br />
is recommended for straight line installations.<br />
3”<br />
Interconnection of two kits<br />
52 www.americanlighting.com<br />
120 AC<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
features<br />
• Indoor/Outdoor rated<br />
• <strong>LED</strong> Flexbrite kits include: Flexbrite, pre-connected<br />
removable five foot power cord, and end cap; and<br />
one mounting clip per foot of Flexbrite<br />
• Kits are easily extendable up to 240 feet – attach<br />
multiple kits together (no tools required)<br />
• Produces virtually no heat for maximum safety<br />
• Highest quality PVC with UV inhibitor to maximize life<br />
• Available in 6400oK (Cool <strong>White</strong>) 2700oK (Ultra <strong>Warm</strong><br />
<strong>White</strong>)<br />
Cool <strong>White</strong> Ultra <strong>Warm</strong> <strong>White</strong><br />
P
Kits<br />
LR-<strong>LED</strong><br />
<strong>LED</strong><br />
Flexbrite<br />
Kits<br />
accessories<br />
CW = Cool <strong>White</strong><br />
UWW = Ultra <strong>Warm</strong> <strong>White</strong><br />
LR-<strong>LED</strong>-EXT3<br />
Three foot jumper for Flexbrite<br />
kits only, white wire; includes two<br />
power connectors<br />
LR-CLIP-20<br />
Blister pack of twenty clear<br />
mounting clips with screws<br />
DL-CLIP/SCREW<br />
Clear “U” shaped mounting clip<br />
technical sPecifications<br />
3 = 3 feet<br />
9 = 9 feet<br />
15 =15 feet<br />
30 = 30 feet<br />
75 = 75 feet<br />
150 = 150 feet<br />
Bill of materials<br />
Determine length needed to the nearest multiple of<br />
3 feet, up to 240 feet<br />
Order kits in like sizes where possible<br />
Order mounting track for straight runs (recommended);<br />
clips are included with kits<br />
RL-TRK-3<br />
Three foot clear mounting track<br />
Sold in case quantities of 40 only!<br />
DL-TRACK-4<br />
Four foot clear mounting track with UV<br />
rating for outdoors; recommended for<br />
use with straight line installations<br />
Voltage 120V, 60hz ac operation<br />
construction heat resistant clear PVc housing with leds every 1”, vertical mount<br />
mounting clear plastic mounting clips or track<br />
dimensions 1/2” diameter<br />
cuttability n/a<br />
Wattage 0.77 watt per foot<br />
maximum run 150 feet<br />
switching Provide switched outlet for on/off and dimming control<br />
linking interconnect kits with no additional parts or use lr-led-eXt3 jumper for connecting two sections together<br />
Packaging retail blister pack for 3’, 9’ and 15’ kits; retail box for 30’, 75’ and 150’ kits<br />
led specs 60,000 hours, .067 watt, 1.11V, 60ma, 3mm, 120° beam angle; uWW (2700°K) cri = 73; cW (6400°K) cri = 80<br />
dimmers dimmable with most standard incandescent, low voltage magnetic and low voltage electronic dimmers<br />
matching Kelvin temperatures may not match from kit to kit; use kits in like size as a rule<br />
www.americanlighting.com 53
<strong>LED</strong> ROPE LIGHT REELS<br />
(sold in bulk reels only) offer a vibrant, long<br />
lasting and cost effective alternative to<br />
traditional incandescent rope light, consuming<br />
85% less energy and lasting up to four times<br />
longer (up to 100,000 hours average life). For<br />
maximum project flexibility, use <strong>LED</strong> Rope Light<br />
Reels when field cuttability is important but<br />
product listing is not. Each full reel is UL Listed,<br />
however, cutting <strong>LED</strong> Rope Light Reels in the<br />
field voids the UL Listing. Bulk reels include one<br />
pre-attached power cord, five "conkits" and<br />
5 mounting clips. Track is recommended for<br />
straight line installations.<br />
7/16”<br />
1 /2”<br />
3 /4”<br />
Flexbrite in mounting track<br />
120 AC P/H<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
features<br />
• Cost effective lighting for a variety of applications<br />
• Vibrant, long lasting colors that grab attention<br />
• Produces virtually no heat for maximum safety<br />
• Bulk reels can be field cut (no longer UL Listed if reel<br />
is cut and/or spliced) for maximum project flexibility<br />
• Bulk reels include one pre-attached power cord, five<br />
"conkits" and fifty mounting clips<br />
• Sold in 150 feet reels only<br />
amBer Blue green red <strong>White</strong> <strong>Warm</strong> <strong>White</strong> yelloW<br />
54<br />
Lighted reels above are for color description only, actual colors may vary.<br />
Do not operate Rope Light while coiled on reel.<br />
www.americanlighting.com
eels<br />
<strong>LED</strong>-DL 150<br />
<strong>LED</strong> Rope<br />
Light Reels<br />
accessories<br />
AM = Amber<br />
BL = Blue<br />
GR =Green<br />
RE = Red<br />
WH = <strong>White</strong><br />
WW = <strong>Warm</strong> <strong>White</strong><br />
YE = Yellow<br />
<strong>LED</strong>-DL-CONKIT-1.6AMP<br />
Non-UL power connector kit with<br />
five foot cord, power connector<br />
and end cap; 1.6A inverter on cord<br />
Two prong polarized plug<br />
037-0002<br />
Non-UL splice connector, includes<br />
power pin connector<br />
037-0005<br />
Invisible splice connector, use with<br />
DL-ST (sold separately)<br />
DL-CLIP/SCREW<br />
Clear “U” shaped mounting clip<br />
that securely holds rope light in<br />
place, includes mounting screw<br />
technical sPecifications<br />
Bill of materials<br />
Order reel(s) in desired color(s)<br />
Order additional <strong>LED</strong>-DL-CONKIT-1.6AMP conkits as<br />
needed (five are included with each reel)<br />
Review other power accessories such as splice<br />
connectors, jumpers or ‘T’s and order as needed<br />
Order mounting track for straight runs (recommended);<br />
50 clips included with each reel<br />
! In any outdoor installation, all conductors must be<br />
coated with dielectric grease, and properly sealed<br />
with silicone and shrink tube.<br />
Voltage 120V, 60hz ac operation (1.6a inverter converts ac to dc)<br />
construction heat resistant clear PVc housing with leds every 1.2”, horizontal mount<br />
mounting clear plastic mounting cllips or track<br />
dimensions 1/2” diameter<br />
Cuttability BL, CW, GR & UWW = 43"; AM, RE & YE = 72"<br />
Wattages 0.8 watt per foot<br />
maximum run 150 feet<br />
switching Provide switched outlet for on/off and dimming control<br />
linking cutting, splicing or repairing custom cuts voids the ul2388 rating<br />
Packaging <strong>White</strong> box (sold by the 150 foot reel only)<br />
led specs 60,000 hours average led life (Wh and WW); 100,000 hours average led life for all other colors<br />
dimmers dimmable with most standard incandescent, low voltage magnetic, low voltage electronic dimmers<br />
037-0006, 037-0008<br />
Two foot (037-0006) or fifteen foot<br />
(037-0008) jumper for connecting two<br />
sections of rope together, includes<br />
two power connectors, white cord<br />
037-0009<br />
Non-UL power connector<br />
037-0010<br />
Non-UL ‘T’ connector; includes three<br />
power pin connectors<br />
DL-TRACK-4<br />
Four foot clear mounting track with UV<br />
rating for outdoors; recommended for<br />
use with straight line installations<br />
www.americanlighting.com 55
CUSTOM CUT<br />
INCANDESCENT ROPE LIGHT<br />
is a cost effective way to light a variety of indoor<br />
or outdoor applications that require an extremely<br />
flexible, reliable and easy to use light source. Multi<br />
purpose, bright and colorful, Custom Cut Rope<br />
Light uses the highest grade heat resistant PVC<br />
available with a newly developed UV inhibitor to<br />
help ensure its longevity. Order Rope Light in custom<br />
cut pieces to the nearest 24” increment to ensure<br />
UL2388 compliance. <strong>American</strong> <strong>Lighting</strong> is certified<br />
to make custom cut lengths at our factory for your<br />
convenience and code compliance needs.<br />
15/16”<br />
Dia.<br />
3”<br />
Factory assembled connector<br />
56 www.americanlighting.com<br />
120 AC<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
features<br />
• Indoor/Outdoor rated<br />
• Cost effective lighting for a variety of applications<br />
• Custom cut per your specifications to the nearest<br />
24” increment<br />
• Custom cuts include UL Listed, factory installed power<br />
cord and end cap connections (non-extendable)<br />
• Available in ten colors<br />
• Highest quality PVC with UV inhibitor to maximize life<br />
P
custom cut<br />
033<br />
UL2388<br />
Incandescent<br />
Rope<br />
AM-C = Amber<br />
BL-C = Blue<br />
CL-C = Clear<br />
FR-C = Frosted<br />
GR-C = Green<br />
series Parallel Wiring<br />
Rope light products in all their various types, whether round, rectangular, <strong>LED</strong> or incandescent, are wired in series parallel.<br />
This means that several individual lamps or <strong>LED</strong>s are wired together to equal 12V, 24V or 120V. Then the individual series<br />
are wired together to light up in unison. However, the small wires and solder joints that interconnect the individual lamps<br />
or <strong>LED</strong>s, and the resistors in the case of <strong>LED</strong>, can be damaged by flexing, impact, high ambient temperatures, among other<br />
things.<br />
If one wire, solder joint or resistor fails or breaks, a whole section will not light. Due to the number of elements involved, and<br />
the numerous extenuating circumstances beyond our control, <strong>American</strong> <strong>Lighting</strong> offers a "standard linear warranty" on most<br />
linear lighting products. The conditional warranty offers replacement product by section due to defective material and/or<br />
workmanship for the warranty period specified within each linear product category.<br />
accessories<br />
ULRL-CONKIT-INCSHELL<br />
UL Listed factory-assembled<br />
connector kit for use with Custom<br />
Cut 120V 1/2” Rope Light only<br />
(required for each length ordered)<br />
DL-CLIP/SCREW<br />
Clear “U” shaped mounting clip<br />
that securely holds rope light in<br />
place<br />
DL-TRACK-4<br />
Four foot clear mounting track<br />
with UV rating for outdoors;<br />
recommended for use with<br />
straight line installations<br />
For non-rated low voltage custom cut 1/2" Clear Incandescent<br />
Rope Light, order DL-CL-12 (12V) or DL-CL-24 (24V). Bulk reel<br />
is 150 feet; maximum single run is 16 feet for DL-CL-12 and 32<br />
feet for DL-CL-24; 5.5 watts/foot; 12V is cuttable every 2", 24V is<br />
cuttable every 4". Use with 037 series accessories on page 61.<br />
technical sPecifications<br />
PI-C = Pink<br />
PU-C = Purple<br />
RE-C = Red<br />
YE/GR-C = Lime Green<br />
YE-C = Yellow<br />
Bill of materials<br />
Determine length needed to the nearest 24” increment<br />
Order one ULRL-CONKIT-INCSHELL for each<br />
non-extendable run up to 150 feet<br />
Order mounting track for straight runs (recommended)<br />
and mounting clips as needed<br />
Voltage 120V, 60hz ac operation<br />
construction uV resistant clear PVc housing with incandescent lamps spaced every 1.09”, vertical mount<br />
mounting clear plastic mounting clips and track<br />
dimensions 1/2” diameter<br />
cuttability every 24”<br />
Wattage 4.2 watts per foot<br />
maximum run 150 feet<br />
Packaging carton and/or polybag<br />
lamp specs 25,000 hour rated life, 6.5V, 70ma, 1.09” lamp spacing<br />
dimmers dimmable with most standard incandescent dimmers<br />
7/16”<br />
1 /2”<br />
3 /4”<br />
Flexbrite in mounting track<br />
www.americanlighting.com 57
INCANDESCENT ROPE<br />
LIGHT KITS provide a quick and<br />
convenient solution to code compliance<br />
challenges. Choose between commercial grade,<br />
(packaged in a white box) and premium grade,<br />
(packaged for retail display). Various multi<br />
purpose lengths of Rope Light Kits interconnect<br />
without the use of tools to create custom<br />
lengths. Economical and dimmable, this linear<br />
lighting product uses the highest grade PVC<br />
available with a UV inhibitor to help ensure<br />
its longevity. Rope Light Kits include attached<br />
power cord and end cap (these are removable<br />
for interconnecting multiples) and mounting<br />
clips (one per foot). Track is recommended for<br />
straight line installations.<br />
Commercial Grade<br />
Premium Grade<br />
58 www.americanlighting.com<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
features<br />
• Indoor/Outdoor rated<br />
• Dimmable<br />
• Rope Light Kits include: UL2388 Listed Rope Light,<br />
pre-connected (removable) five foot power cord,<br />
removable end cap and one mounting clip per foot<br />
• Kits are easily extendable up to 240 feet for premium<br />
grade; up to 150 feet for commercial grade<br />
• Quickly attach multiple kits together without the use<br />
of tools<br />
• Highest quality PVC with UV inhibitor to maximize life<br />
1-1/4”<br />
Dia.<br />
120 AC P<br />
3”<br />
Interconnection of two kits<br />
P
Kits<br />
042-CL<br />
Commercial<br />
Grade<br />
018<br />
Premium<br />
Grade<br />
accessories<br />
2 = 2 feet<br />
6 = 6 feet<br />
10 = 10 feet<br />
18 = 18 feet<br />
30 = 30 feet<br />
50 = 50 feet<br />
0001 = 2 feet<br />
0002 = 6 feet<br />
0003 = 10 feet<br />
0004 = 18 feet<br />
0005 = 30 feet<br />
0006 = 50 feet<br />
ULRL-EXT-3<br />
Three foot jumper for Rope Light<br />
Kits, white wire; includes<br />
two power connectors, blister pack<br />
DL-CLIP/SCREW<br />
Clear “U” shaped mounting clip<br />
that securely holds rope light in<br />
place<br />
technical sPecifications<br />
10 feet<br />
Bill of materials<br />
Determine length needed to the nearest 24” increment<br />
Order kits in lengths to match target length<br />
Order mounting track for straight runs (recommended);<br />
clips are included with kits (one per foot of rope)<br />
installation eXamPle<br />
20 feet<br />
20 feet<br />
Consider using shorter length kits to build longer custom<br />
lengths. If one section should fail, a kit can be replaced<br />
(which maintains UL Listing) versus repairing a section,<br />
which voids UL.<br />
RL-TRK-3<br />
Three foot clear mounting track<br />
Sold in case quantities of 40 only!<br />
10 feet<br />
DL-TRACK-4<br />
Four foot clear mounting track with UV<br />
rating for outdoors; recommended for<br />
use with straight line installations<br />
Voltage 120V, 60hz ac operation<br />
construction uV resistant clear PVc housing with incandescent lamps spaced every 1.09”, vertical mount<br />
mounting clear plastic mounting clips or track<br />
dimensions 1/2” diameter<br />
Wattage 5.0 watts per foot for commercial grade; 3.0 watts per foot for premium grade<br />
maximum run 150 feet for commercial grade; 240 feet for premium grade<br />
switching Provide switched outlet for on/off and dimming control<br />
linking interconnect kits with no additional parts or use ulrl-eXt-3 jumper for connecting two sections together<br />
Packaging <strong>White</strong> box for commercial grade; retail blister pack or retail box for premium grade<br />
lamp specs 25,000 hour rated life; 6.5V, 70ma, 1.09” lamp spacing for commercial grade; 5V, 60ma, 1” lamp spacing for premium grade<br />
dimmers dimmable with most standard incandescent dimmers<br />
diffuser clear PVc jacket<br />
www.americanlighting.com 59
ROPE LIGHT<br />
(sold in 150 foot reels<br />
only) is a cost effective, multi purpose linear<br />
light. For maximum project flexibility, use bulk<br />
Rope Light when field cuttability is important<br />
but product listing is not. Field cut rope light<br />
is suitable for temporary or seasonal lighting,<br />
not permanent installation. Bulk reels include<br />
five power cord connector kits and 50 mounting<br />
clips. Track is recommended for straight line<br />
installations. A variety of splice connectors,<br />
jumpers and ‘T’ connectors are also available<br />
(sold separately).<br />
Do not operate Rope Light while coiled on reel.<br />
From top left to bottom right: AMber, BLue, CLear, FRosted,<br />
GReen, PInk, PUrple, REd, YEllow<br />
60 www.americanlighting.com<br />
120 AC P<br />
accent lighting decoratiVe lighting<br />
Building outlines architectural details<br />
Patios, decKs & gaZeBos holiday lighting<br />
features<br />
• Cost-effective lighting for a variety of applications<br />
• Bright, colorful, flexible and versatile linear lighting<br />
product<br />
• Field cuttable every 18” for maximum project flexibility<br />
• Available in nine different colors<br />
• Each reel includes five connector kits (conkits) and 50<br />
mounting clips<br />
P
eels<br />
RL<br />
Incandescent<br />
Rope Light<br />
Reels<br />
accessories<br />
AM = Amber<br />
BL = Blue<br />
CL = Clear<br />
FR = Frosted<br />
GR = Green<br />
PI = Pink<br />
PU= Purple<br />
RE = Red<br />
YE = Yellow<br />
037-0001, 037-0004, 037-0007<br />
Power connector kit (conkit) with<br />
5' (0001), 15' (0004) or 2' (0007)<br />
length cord, power connector and<br />
end cap; two prong polarized plug<br />
037-0002<br />
Non-UL splice connector, includes<br />
power pin connector<br />
037-0005<br />
Invisible splice connector, use with<br />
DL-ST (sold separately)<br />
DL-ST<br />
Heat shrink tube, sold by the foot<br />
technical sPecifications<br />
150<br />
DL-CLIP/SCREW<br />
Clear "U" shaped mounting clip that<br />
securely holds rope light in place<br />
Bill of materials<br />
Voltage 120V, 60hz ac operation<br />
construction uV resistant clear PVc housing with incandescent lamps spaced every 1”, vertical mount<br />
mounting clear plastic mounting clips or track<br />
Bulk reel 150 feet<br />
dimensions 1/2” diameter<br />
Wattage 5.5 watts per foot<br />
maximum run 150 feet<br />
cuttability every 18”<br />
Packaging <strong>White</strong> box<br />
lamp specs 25,000 hour rated life, 6.5V, 70ma, 1” lamp spacing<br />
dimmers dimmable with most standard incandescent dimmers<br />
Order reel(s) in desired color(s)<br />
Order additional additional conkits as needed<br />
(five 037-0001 are included with each reel)<br />
Review other power accessories such as splice<br />
connectors, jumpers or ‘T’s and order as needed<br />
Order mounting track for straight runs (recommended);<br />
50 clips included with each reel<br />
! In any outdoor installation, all conductors must be<br />
coated with dielectric grease, and properly sealed<br />
with silicone and shrink tube.<br />
037-0006, 037-0008<br />
Two foot (037-0006) or fifteen foot<br />
(037-0008) jumper for connecting two<br />
sections of rope together, includes<br />
two power connectors, white cord<br />
037-0009<br />
Non-UL power connector<br />
DL-END<br />
Clear plastic end cap<br />
037-0010<br />
Non-UL ‘T’ connector; includes three<br />
power pin connectors<br />
037-0011<br />
Non-UL ‘Y’ connector kit; includes two<br />
power connectors, requires conkit<br />
DL-TRACK<br />
Four foot clear mounting track with UV<br />
rating for outdoors; recommended for<br />
use with straight line installations<br />
www.americanlighting.com 61
COMMERCIAL GRADE<br />
LIGHT STRING adds festive lighting to<br />
interiors and exteriors including building outlines,<br />
patio lighting, gazebos and other decorative uses.<br />
Heavy-duty factory molded sockets on 14-gauge<br />
or 16-gauge wire are durable and well suited for<br />
a variety of commercial application's where UL<br />
Listing is not required. Available in several wire<br />
colors, socket sizes and socket spacings. 330 foot<br />
bulk reels are great for custom situations and kits<br />
are ready to use, just add lamps and plug in!<br />
Suspended Medium Base<br />
Max load/socket 25 watts<br />
Intermediate Base<br />
Max load/socket 10 watts<br />
62 www.americanlighting.com<br />
Medium Base<br />
Max load/socket 25 watts<br />
Candelabra Base<br />
Max load/socket 10 watts<br />
120 AC P/H<br />
decoratiVe lighting Building outlines<br />
Patio lighting tents festiVe interior<br />
eVents PaVilions<br />
features<br />
• Factory-molded sockets on 14-gauge wire is suitable for<br />
commercial applications (16-gauge for kits)<br />
• Formulated PVC sockets form a tight weatherproof seal<br />
around the bulb<br />
• Long life, low maintenance linear lighting (for use with<br />
Long Life Lamps on facing page)<br />
• Available in bulk reels in candelabra, intermediate and<br />
medium base sockets<br />
• Use with <strong>LED</strong> lamps to run full reel length and save up to<br />
98% in energy costs over incandescent
eels<br />
Kits<br />
LS<br />
48 foot,<br />
24” spacing<br />
Medium<br />
base kits<br />
LS-M-24-100<br />
100 foot,<br />
24” spacing<br />
Medium base<br />
suspended kits<br />
accessories<br />
NEW<br />
LS<br />
M-24 = Medium base , 24” spacing<br />
MS-24 = Medium base suspended, 24” spacing<br />
I-15 = Intermediate base, 15” spacing<br />
C-12 = Candelabra base, 12” spacing<br />
NOTE: LS-M-24 is not available in <strong>White</strong><br />
M* = Medium base<br />
MS = Medium base suspended<br />
*NOTE: LS-M-24-48 is not available in <strong>White</strong><br />
BK = Black wire<br />
GR = Green wire<br />
035-S14-<strong>LED</strong>-(COLOR)<br />
Medium base, 2.25 watts each,<br />
50,000 hour rated life;<br />
Colors: AMber, BLue, GReen, Pure<br />
<strong>White</strong>, REd, <strong>Warm</strong> <strong>White</strong>, YEllow<br />
B11S14-(COLOR*)<br />
Medium base, 11 watts each,<br />
8,000 hour rated life;<br />
3-1/2” M.O.L., 1-3/4” dia.<br />
Sold in boxes of 25 only<br />
B7.5C-(COLOR*)<br />
Candelabra base, 7.5 watts each,<br />
8,000 hour rated life;<br />
2-1/8” M.O.L., 1-3/8 ” dia.<br />
Sold in boxes of 25 only<br />
* Incandescent colors: AMber, BLue, CLear, FRosted, GReen, REd, YEllow and WHite<br />
technical sPecifications<br />
24 - 48<br />
LS-M-24-100-BK<br />
100 foot,<br />
24” spacing<br />
Medium base<br />
Black wire<br />
BK = Black wire<br />
GR = Green wire<br />
WH = <strong>White</strong> wire<br />
BK = Black wire<br />
GR = Green wire<br />
WH = <strong>White</strong> wire<br />
B7.5S11-(COLOR*)<br />
Intermediate base, 10 watts each,<br />
8,000 hour rated life;<br />
2-1/2” M.O.L., 1-9/16” dia.<br />
Sold in boxes of 25 only<br />
LS-M/MS-END<br />
Black end cap for medium base<br />
light string (LS-M and LS-MS)<br />
X-END<br />
<strong>White</strong> end cap for LS-C and LS-I<br />
Voltage 120V, 60Hz AC operation (<strong>LED</strong> retrofits have built-in drivers to convert AC power to DC)<br />
construction Pre-assembled sockets with set spacing on 14aWg, sPt-2 wire (for lms and ls-ms); 16 aWg for ls-i and ls-c<br />
mounting do not mount with sockets facing upward! When span distances greater than 19 feet, supplemental support cable is required<br />
Bulk reel 330 feet<br />
Wattage maximum wattage per socket is as follows: ms = 25 watts, m = 25 watts, i = 10 watts, c = 10 watts<br />
maximum run 1800 watts for bulk reels, 1200 watts for 100 foot kits (50 sockets x 25 watts), 600 watts for 48 foot kits (24 sockets x 25 watts)<br />
Power cord Bulk reels have 24” lead wire and no attached plug; kits have six foot fused power cord molded onto 24” lead<br />
Packaging Bulk reel or poly bag kits<br />
dimmers dimmable with standard incandescent dimmer – be sure to use high capacity type for loads over 600 watts<br />
lamp specs see accessories above<br />
www.americanlighting.com 63
socKet assemBly and caBle<br />
LFS-24V<br />
24V Xenon<br />
Assembly<br />
5W = 5 watts<br />
8.5W = 8.5 watts<br />
10W = 10 watts<br />
LFS-12V-1.5W-<strong>LED</strong>-WW<br />
12V DC <strong>LED</strong> Assembly<br />
LFS-CABLE<br />
Bill of materials<br />
Determine overall length(s) needed for cable<br />
(specify lead wire and tail wire lengths)<br />
Determine desired spacing for sockets and select<br />
type of low voltage lamp assembly<br />
Add total wattage – do not exceed 600 watts<br />
Send complete ordering information to factory<br />
Allow three weeks for delivery<br />
! Wire and sockets priced separately<br />
3-1/2”<br />
2-3/8”<br />
1-1/8”<br />
64 www.americanlighting.com<br />
AC P/H<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
features<br />
• Custom built to your exact specifications<br />
• Shatterproof, waterproof and resistant to vibration<br />
• c/UL/us Listed for wet locations (IP68)<br />
• Safe and reliable service even in adverse conditions - IP68<br />
• High output, low energy xenon lamps assemblies are<br />
ultra durable and reliable<br />
• Save in maintenance costs – long 20,000 hour rated life<br />
• Three year warranty<br />
technical sPecifications<br />
Voltage 12V dc or 24V, 60hz ac operation<br />
Construction Stranded tinned copper conductors in rubber cable with nylon sockets pre-assembled at specified intervals<br />
mounting use lfs-BP (mounting backplate, pre-attached) for horizontal mount to wall or vertical mount to ledge; use<br />
lfs-caBle-cliP or zip ties to mount to catenary wire (sold separately) for spans greater than 15 feet<br />
dimensions h = 3-1/2” (with globe); dia = 2-3/8”<br />
Wattage as noted above<br />
maximum run 300 watts in a single run for 12V; 600 watts in a single run for 24V<br />
maximum span 15 feet between supports<br />
Power cord n/a, specify lead wire<br />
Packaging Bulk<br />
transformer festoon light string with xenon assemblies will require a 12V or 24V magnetic transformer (see page 83), for power<br />
supplies for led assemblies, please contact factory.<br />
dimmers dimmable with standard incandescent dimmer – be sure to use high capacity type for loads over 600 watts<br />
lamp specs 12V dc led: 80,000 hours rated life, 1.5 watts each, 3000oK; 24V xenon: 20,000 hour rated life, 5, 8.5 or 10 watts each<br />
diffuser clear or colored uV stabilized polycarbonate globe included with each assembly<br />
12<br />
24
features<br />
• <strong>Warm</strong> <strong>White</strong> energy efficient <strong>LED</strong>s that save 75%<br />
in running costs over incandescent look alikes,<br />
while also reducing maintenance costs<br />
significantly<br />
• Wide viewing angle (180°) for high visibility<br />
• Long life <strong>LED</strong>s (up to 50,000 hours)<br />
• IP44 rated for protection against moisture for<br />
indoor/outdoor use<br />
• Low cost alternative to other <strong>LED</strong> low voltage<br />
light string products<br />
• Low voltage LightStar is safe for year-round use<br />
• 12V DC operation requires a 12V power supply<br />
(sold separately, see page 83)<br />
• DC power supply recommended<br />
reels<br />
LLR-6-BK-WW<br />
<strong>LED</strong><br />
LIGHTSTAR<br />
REELS<br />
technical sPecifications<br />
accent lighting coVe lighting decoratiVe lighting<br />
Building outlines architectural details<br />
BooKshelVes Patios, decKs & gaZeBos<br />
Voltage 12V dc, constant voltage<br />
construction commercial grade light string; 5mm inverted cone lenses attached to Black 18-guage sPt-1 wire, leds spaced every 6”<br />
mounting tree wrap or zip ties, consult factory for availability of track<br />
Bulk reels 344.5 feet<br />
Dimensions H = 5/8", W = 9/32" (diameter of base)<br />
cuttability every 6” (between leds)<br />
Wattage 0.15 watt per led<br />
maximum run 700 leds (one reel)<br />
Packaging sold by the reel (344.5 feet in length)<br />
leds specs 50,000 hours rated life, non-replaceable 12V dc leds, 2700°K <strong>Warm</strong> <strong>White</strong>, 180° viewing angle<br />
dimmers not dimmable<br />
5/8”<br />
9/32” Dia.<br />
120<br />
DC<br />
www.americanlighting.com 65<br />
H
features<br />
• Durable steel housing with epoxy resin and gasketed<br />
cover for indoor and outdoor use (IP65 rated)<br />
• Low glare design with <strong>Warm</strong> <strong>White</strong> (3100K) <strong>LED</strong> light<br />
• Attractive, beveled brushed steel trim<br />
• Regressed <strong>LED</strong> with frosted glass lens eliminates glare<br />
• Connect up to fourteen lights to one driver using series<br />
wiring configuration<br />
• Easy installation – steel spring clips hold light firmly in<br />
place<br />
• Long life, low maintenance <strong>LED</strong>s last up to 60,000<br />
hours<br />
• No lamps to install or replace<br />
fiXture<br />
023-0001<br />
<strong>LED</strong><br />
Mini Step<br />
Light<br />
Bill of materials<br />
The <strong>LED</strong> Mini Step Light uses the same layout and series wiring configuration as the <strong>LED</strong> Bullet.<br />
see Bullet page 75 for power supplies and accessories; and mini swivel page 73 for bill of materials and<br />
installation examples.<br />
technical sPecifications<br />
niches Wine storage home theatres<br />
stair safety corridor lighting<br />
decKs gaZeBos PathWays<br />
Voltage 350ma, 50/60hz dc operation<br />
Construction Heavy-duty gauge, powder coated steel housing with epoxy resin fill and stainless steel bevel trim<br />
mounting recessed only<br />
Dimensions H = 1/8” (recessed profile), Dia = 2”<br />
Lead wires 38” length, 24AWG with molex connector for series wiring configuration<br />
switching use switched outlet to control on/off functions<br />
cut-out 1-1/2” hole size for recessed mounting<br />
Wattage 1.25 watts each<br />
maximum run 18 watts<br />
linking accessories are required to power and link the led mini step light. see page 73 for details.<br />
Packaging <strong>White</strong> box<br />
led specs 60,000 hour rated life, 350ma, high power (1 watt) led, 3100K, 85 cri, 110° beam angle<br />
dimmers dimmable with low voltage dimmers only when powered by led-dr18-350d<br />
diffuser frosted glass lens<br />
66 www.americanlighting.com<br />
350 DC<br />
P/H
features<br />
• Durable cast zinc-magnesium faceplates in four styles and<br />
three finishes (Stainless Steel, Dark Bronze and <strong>White</strong>)<br />
• Four styles: vertical scoop, vertical louver, horizontal louver<br />
and smooth (for either vertical or horizontal applications)<br />
• <strong>Warm</strong> <strong>White</strong> 3200°K <strong>LED</strong> light mimics incandescent<br />
sources, but doesn’t build up heat<br />
• Long life, low maintenance <strong>LED</strong>s last 50,000 hours (average)<br />
• Eight <strong>LED</strong>s operate with a total load of only three watts<br />
• Save over 65% in running costs when compared to ten watt<br />
incandescent step lights<br />
• Integrated, embedded driver allows 120V AC input<br />
• IP65 rated for outdoor applications when used with<br />
watertight junction box and gasket (sold separately)<br />
fiXture facePlate oPtions<br />
SGL-<strong>LED</strong>-WW SGL<br />
Vertical<br />
Scoop<br />
<strong>Warm</strong> <strong>White</strong><br />
Light Engine<br />
(3 watts)<br />
Vertical<br />
Louver<br />
Single Gang<br />
Faceplate<br />
Note: Each Step Light Engine requires a faceplate.<br />
technical sPecifications<br />
Smooth<br />
HL = Horizontal Louver<br />
SM = Smooth Lens<br />
VL = Vertical Louver<br />
VS = Vertical Scoop<br />
Horizontal<br />
Louver<br />
DB = Dark Bronze<br />
SS = Stainless Steel<br />
WH = <strong>White</strong><br />
120 AC<br />
stair safety PathWays decKs<br />
gaZeBos corridors hallWays loBBies<br />
faceplate<br />
and light engine<br />
Voltage 100-240V ac, 50/60 hz<br />
construction heavy-duty plastic housing, acrylic lens, fully sealed for use in wet locations (iP65 rated when used with watertight junction box<br />
and gasket, sold separately)<br />
mounting mounts to single gang standard depth junction box<br />
Dimensions Light Engine: H = 4-1/2”, W = 2-3/4”, D = 1-1/2” (fits standard single gang junction box); Faceplates: SGL-SM: H = 4-3/4",<br />
W = 2-15/16", D = 3/8"; SGL-VL: H = 4-3/4", W = 2-15/16", D = 3/8"; SGL-VS: H = 4-3/4", W = 2-15/16", D = 1-1/16"<br />
lead wires 7” 18aWg leads (Black is hot, <strong>White</strong> is neutral/common)<br />
switching use switched outlet to control power to circuit<br />
Wattage 3 watts<br />
maximum run n/a<br />
linking n/a<br />
Packaging Brown box<br />
led specs 50,000 hour rated life, eight low-power leds, 110° beam angle<br />
dimmers not dimmable<br />
diffuser <strong>White</strong> acrylic lens<br />
www.americanlighting.com 67<br />
H<br />
No specialized or proprietary<br />
rough-in kit is required.<br />
Each Step Light mounts to a<br />
standard depth single gang<br />
box. For use outdoors, a<br />
watertight single gang box<br />
and gasket must be used<br />
(purchased separately) to<br />
maintain IP65 rating.<br />
gasket<br />
watertight<br />
box
The <strong>LED</strong> PUCK features a durable<br />
steel housing and three high power 3100°K<br />
<strong>LED</strong>s. Available in three attractive metal finishes<br />
– Black, Bronze and Brushed Steel – to add a<br />
distinctive touch to any lighting display. Easily<br />
convert from surface mount to an ultra low<br />
profile recess mount by removing the surface<br />
ring. Each <strong>LED</strong> Puck is rated at up to 60,000<br />
hours, uses only 3.75 watts of energy and does<br />
not emit harmful UV rays.<br />
Surface Mount<br />
2-11/16"<br />
Diameter<br />
Recess Mount<br />
2-3/8" cut-out<br />
2-11/16"<br />
Diameter<br />
68 www.americanlighting.com<br />
15/16"<br />
11/16"<br />
5/32"<br />
300 DC<br />
caBinets disPlay cases retail enVironments<br />
entertainment centers architectural Built-ins<br />
BacK Bar disPlays restaurants Wine rooms<br />
features<br />
• Bright white (3100°K) <strong>LED</strong> light<br />
• Durable steel housing in three attractive finishes<br />
• Produces minimal heat – helps keep displays cool<br />
• Recess or surface mount<br />
• Easy installation – no lamps to replace<br />
• Save energy – each puck light uses only 3.75 watts<br />
• No harmful ultraviolet (UV) rays<br />
• Long life <strong>LED</strong>s (up to 60,000 hours)<br />
P
fiXtures<br />
LPL-1<br />
<strong>LED</strong><br />
Puck<br />
accessories<br />
BK = Black<br />
BR = Bronze<br />
BS = Brushed Steel<br />
technical sPecifications<br />
LPL-DR10-300PI<br />
Plug-in <strong>LED</strong> driver with required<br />
junction box for powering<br />
and linking 1-3 <strong>LED</strong> Pucks only<br />
(300mA), c/UL/us Listed<br />
Bill of materials<br />
Determine total number of <strong>LED</strong> Puck lights to be used<br />
for the application and select finish<br />
Break total number of <strong>LED</strong> Puck lights into sets of three <br />
or less (depending on location) and specify one<br />
LPL-DR10-300PI for each set of pucks<br />
Each puck has a 36” lead with DC jack. Do not cut off<br />
the DC jack! If additional lead wire is required, order<br />
24” extensions separately. Interconnect up to<br />
ten extensions as needed.<br />
Bill of materials for installation example shown below:<br />
(3) LPL-1BR<br />
(1) LPL-DR10-300PI<br />
INSTALLATION EXAMPLE<br />
! Although the junction box contains six ports, do not connect<br />
more than three <strong>LED</strong> Pucks. Do NOT cut off the DC jacks!<br />
<strong>LED</strong> Pucks are not compatible with any other drivers<br />
RCA-EX24<br />
24” extension (interconnectable) with<br />
DC jacks, for adding additional lead<br />
wire to <strong>LED</strong> Puck lights<br />
Voltage 300ma, 50/60hz, dc operation<br />
construction heavy-gauge steel housing and surface ring<br />
mounting recessed or surface mount<br />
Dimensions H = 15/16” (surface mounted), H = 5/32” (recessed profile), Dia = 2-11/16”<br />
lead wires 36” length, 22aWg with dc jack (3/8” diameter at largest point)<br />
switching use switched outlet to control on/off functions<br />
cut-out 2-3/8” hole size for recessed mounting<br />
Wattage 3.75 watts<br />
maximum run do not connect more than three puck lights to one power supply<br />
Packaging <strong>White</strong> box<br />
led specs 60,000 hour rated life, 300ma, high power (1 watt) non-replaceable led, 3100°K, 85 cri, 28° beam angle<br />
dimmers not dimmable<br />
diffuser Prismatic integrated clear acrylic lenses (one for each led)<br />
www.americanlighting.com 69
1-5/8”<br />
cut-out<br />
The HIGH POWER SWIVEL<br />
uses a high performance 3-watt <strong>LED</strong> that<br />
delivers bright white light with a lot of punch!<br />
It measures only 2” in diameter and fits in areas<br />
with low clearance since it stands only 1-3/8”<br />
high. These are especially useful in commercial<br />
applications – save over 90% in running costs<br />
and avoid frequent lamp replacements. The<br />
<strong>LED</strong> High Power Swivel does not add heat to the<br />
space and emits no damaging ultraviolet (UV)<br />
rays.<br />
78" lead wire with<br />
molex connector<br />
1-3/8”<br />
1/8”<br />
17” lead wire with<br />
molex connector<br />
1-1/4”<br />
2”<br />
70 www.americanlighting.com<br />
700 DC<br />
soffits disPlay cases retail enVironments<br />
BacK Bar disPlays art galleries<br />
architectural Built-ins entertainment centers<br />
features<br />
• Powerful recessed light that swivels to direct light<br />
where you want it<br />
• Saves energy – each uses only 3.25 watts<br />
• Produces minimal heat – helps keep displays cool<br />
• No harmful ultraviolet (UV) rays<br />
• Link up to eleven to one driver<br />
• Long life <strong>LED</strong>s last up to 50,000 hours<br />
H
fiXture<br />
HPS-AL<br />
High Power<br />
Swivel<br />
accessories<br />
technical sPecifications<br />
<strong>LED</strong>-DR18-700<br />
Hardwire constant current (700mA)<br />
<strong>LED</strong> driver, Class 2, 3-18 watts,<br />
6”L x 2-5/8”W x 1-3/16”H<br />
c/UR/us Recognized<br />
<strong>LED</strong>-DR12-700<br />
Hardwire constant current (700mA)<br />
<strong>LED</strong> driver, Class 2, 3-12 watts,<br />
6-5/8”L x 1-1/2”W x 1-3/16”H<br />
c/UR/us Recognized<br />
<strong>LED</strong>-END-700<br />
<strong>LED</strong> end series cap for use with<br />
<strong>LED</strong>-CON2-700 (for single<br />
light systems) or when additional<br />
end series caps are needed<br />
<strong>LED</strong>-DR36-700D<br />
Dimmable hardwire constant current<br />
7000mA) <strong>LED</strong> driver, Class 2, 3-11 <strong>LED</strong>s,<br />
6”L x 2-5/8”W x 1-3/16”H<br />
c/UR/us Recognized<br />
Bill of materials<br />
Determine total number and types to be used for the<br />
application<br />
Add up total wattage to determine how many drivers will<br />
be needed<br />
Order one <strong>LED</strong>-DR12-700 for each set of 12 watts or less<br />
Order one <strong>LED</strong>-DR18-700 for each set of 18 watts or less<br />
Order <strong>LED</strong>-DR36-700D for each set up to 18 watts and/or<br />
for applications where dimmability is imortant<br />
Order <strong>LED</strong>-CON2-700 (or other series connector with<br />
enough ports in the same quantity as High Power<br />
Swivels)<br />
<strong>LED</strong>-CON2-700<br />
Power extension connector<br />
1-3/8”L x 3/4”W x 1/2”H<br />
78” lead wire<br />
<strong>LED</strong>-CON3-700<br />
Power extension connector<br />
Includes one <strong>LED</strong>-END-700 and<br />
78” lead wire<br />
<strong>LED</strong>-CON6-700HW<br />
Hardwire power connection hub<br />
Includes three <strong>LED</strong>-END-700s<br />
<strong>LED</strong>-CON6-700<br />
Power connection hub, required<br />
to complete the series wiring<br />
configuration for sets up to six<br />
Voltage 700ma, 60hz dc operation<br />
construction die-cast aluminum alloy housing and heat sink, stainless steel clips<br />
mounting recessed only<br />
Dimensions H = 3/16” (recessed profile), H = 1-3/8” (overall), Dia = 2-1/16”<br />
Wattage 3.25 watts<br />
Lead wires 17” length, 22AWG with 700mA molex connector for series wiring configuration<br />
switching use switched outlet to driver for on/off control<br />
cut-out 1-5/8” hole size<br />
Maximum run Eleven fixtures maximum with <strong>LED</strong>-DR36-700D, five fixtures maximum with <strong>LED</strong>-DR18-700, three fixtures maximum<br />
with led-dr12-700<br />
linking accessories are required to power and link the high Power swivel. see above for details.<br />
Packaging <strong>White</strong> box<br />
led specs 50,000 hour rated life, 700ma, one high power (3-watt) led, 3000°K, 90+ cri, 15° beam angle<br />
dimmers dimmable with led-dr36-700d (check dimmer manufacturer’s website for report card)<br />
diffuser clear acrylic lens cover<br />
Swivel 30° swivel on fixed axis<br />
www.americanlighting.com 71
The <strong>LED</strong> MINI SWIVEL<br />
delivers bright white light with a lot of punch!<br />
The three-watt version is powerful enough to<br />
replace small can lights to highlight artwork.<br />
The one-watt styles recess into small spaces to<br />
make jewelry sparkle and back bars come to<br />
life. The <strong>LED</strong> Mini Swivel Series does not build up<br />
heat, keeping displays cool. These are especially<br />
useful in commercial recessed applications –<br />
save over 90% in running and maintenance<br />
costs over incandescent cans.<br />
led mini swivel<br />
shown in matte Black (BK)<br />
led mini Visor<br />
shown in satin aluminum (al)<br />
2-1/16”<br />
led 3-watt swivel<br />
shown in <strong>White</strong> (Wh)<br />
1”<br />
60 swivel<br />
about axis<br />
1-1/4”<br />
72 www.americanlighting.com<br />
1-9/16”<br />
1-3/16”<br />
5/8”<br />
features<br />
• Bright white 3100˚K <strong>LED</strong> light with high color rendering<br />
• Powerful point source of light that swivels to direct light<br />
where you need it<br />
• Produces minimal heat – helps keep displays cool<br />
• Recess mount in sheetrock, wood and other materials<br />
• Easy installation – no lamps to replace<br />
• Save energy – available in 1.25 watts and 3.75 watts<br />
• No harmful ultraviolet (UV) rays<br />
• Link up to 18 watts to one power supply<br />
• Long life <strong>LED</strong>s (up to 60,000 hours)<br />
• Dimmable<br />
60 swivel<br />
about axis<br />
1-1/4”<br />
2-1/16”<br />
350 DC<br />
3-1/8”<br />
1-3/8”<br />
P/H<br />
Kitchen caBinets comPuter desKs disPlay cases<br />
retail enVironments accent lighting<br />
entertainment centers<br />
30<br />
universal<br />
swivel<br />
2-1/16”
fiXtures<br />
LMS<br />
<strong>LED</strong> Mini<br />
Swivel<br />
LMV<br />
<strong>LED</strong> Mini<br />
Visor<br />
LMS-3<br />
<strong>LED</strong> 3-Watt<br />
Swivel<br />
THREE LIGHT KITS<br />
LMS<br />
LMV<br />
LMS-3<br />
installation eXamPle<br />
AL = Satin Aluminum<br />
BK = Matte Black<br />
WH = <strong>White</strong><br />
AL = Satin Aluminum<br />
BK = Matte Black<br />
WH = <strong>White</strong><br />
AL = Satin Aluminum<br />
BK = Matte Black<br />
WH = <strong>White</strong><br />
3KIT<br />
Kit of 3<br />
! To add additional lead wire length to a light, splice<br />
in wire here (16-gauge or better) matching polarity.<br />
technical sPecifications<br />
AL = Satin Aluminum<br />
BK = Matte Black<br />
WH = <strong>White</strong><br />
Bill of materials<br />
See installation example below and accessories list on page<br />
75 for assistance in determining a bill of materials.<br />
Determine total number and types to be used for the<br />
application<br />
Add up total wattage to determine how many drivers<br />
will be needed<br />
For hardwire installations:<br />
order one <strong>LED</strong>-DR10-350AL for each set of 1-10 watts;<br />
order one <strong>LED</strong>-DR12-350 for each run of 6-12 watts;<br />
order one <strong>LED</strong>-DR18-350 for each run of 10-18 watts;<br />
order one <strong>LED</strong>-DR18-350D for each run of 3-12 <strong>LED</strong>s<br />
(3.75-15 watts) and/or for applications where<br />
dimming is required<br />
Order <strong>LED</strong>-CON2-350 (or other series connector with<br />
enough ports in the same quantity as Mini Swivels)<br />
Bill of materials for installation example below:<br />
(4) LMV-AL<br />
(1) <strong>LED</strong>-CON6-350<br />
(1) <strong>LED</strong>-DR10-350AL<br />
accessories<br />
The <strong>LED</strong> Mini Swivel Series uses the same accessories and<br />
series wiring configuration as the <strong>LED</strong> Bullet. See page 75<br />
for required drivers and power connection accessories.<br />
Each LMV and LMS Mini Swivel light includes two optical lenses (optics).<br />
The one that is installed in the fixture is a spot (25˚ beam angle). If<br />
needed, the spot can be replaced with the 80˚ optic to create a flood.<br />
The LMS-3 style is equipped with 25˚ optics only.<br />
Voltage 350ma, 50/60hz dc operation<br />
construction die-cast aluminum alloy housing and heat sink, stainless steel clips<br />
Dimensions For LMS: H = 1/8” (recessed profile), Dia = 2-1/16”, For LMV: H = 1/2” (recessed profile), Dia = 2-1/16”<br />
mounting recessed only<br />
Diameter For LMS-3: H = 3/32” (recessed profile), Dia = 3-1/8”<br />
Lead wires 38” length, 24AWG with 350mA molex connector for series wiring configuration<br />
switching use switched outlet to control on/off functions<br />
cut-out for lms and lmV: 1-7/8” hole size, for lms-3: 2-3/4” hole size<br />
Wattages lms and lmV = 1.25 watts; lms-3 = 3.75 watts<br />
maximum run 17.5 watts (14 leds) with led-dr18-350<br />
led specs 60,000 hour rated life, 350ma, high power (1-watt) led, 3100°K, 85 cri, 25° beam angle<br />
dimmers dimmable only with led-dr18-350d; see www.americanlighting.com for dimmer compatibility (driver cut sheet)<br />
diffuser all styles have clear acrylic lens covers installed with a beam angle of 25°. for lms and lmV styles, an additional<br />
optional prismatic lens cover is included that can be replaced to change the beam angle to 80°<br />
swivel lms and lmV swivel about an axis, up to 90° and 30° respectively; lms-3 has a universal swivel capability up to 30°<br />
25˚ Spot<br />
80˚ Flood<br />
www.americanlighting.com 73
The <strong>LED</strong> BULLET is a miniature<br />
recessed light that provides a point source of<br />
white accent light using a constant current and<br />
high powered 1 watt <strong>LED</strong>. The Bullet fits into<br />
small spaces making it ideal for applications<br />
such as kitchen cabinets, entertainment centers<br />
and display cases. Benefits include a long<br />
maintenance free life, the absence of harmful<br />
ultraviolet rays, and warm white light that<br />
mimics incandescent.<br />
74 www.americanlighting.com<br />
350 DC<br />
Kitchen caBinets comPuter desKs disPlay cases<br />
retail enViroments accent lighting<br />
entertainment centers<br />
P/H<br />
features<br />
• Bright <strong>Warm</strong> <strong>White</strong> (3100°K) <strong>LED</strong> light<br />
• Powerful point source of light in four attractive finishes<br />
• Produces minimal heat – helps keep displays cool<br />
• Recess mount in small spaces where standard recessed<br />
lighting fixtures are too large<br />
• Easy installation – no lamps to replace<br />
• Save energy – each Bullet uses only 1.25 watts<br />
• No harmful ultraviolet (UV) rays<br />
• Link up to 14 <strong>LED</strong> Bullets to one power supply<br />
• Long life <strong>LED</strong>s (up to 60,000 hours)
fiXtures Kits<br />
024<br />
<strong>LED</strong><br />
Bullet<br />
Bulk<br />
accessories<br />
0001 = Black<br />
0002 = Chrome<br />
0003 = Bronze<br />
0004 = <strong>White</strong><br />
technical sPecifications<br />
<strong>LED</strong>-DR18-350D<br />
Dimmable hardwire driver,<br />
7-1/8”L x 1-3/4”W x1-1/4”H<br />
Constant current, 350mA,<br />
3-12 <strong>LED</strong>s, UL Recognized<br />
Enclosure (ENCL-11) sold separately<br />
<strong>LED</strong>-DR18-350<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver, Class 2, 10-18 watts,<br />
6”L x 2-5/8”W x 1-3/16”H<br />
c/UR/us Recognized<br />
<strong>LED</strong>-DR12-350<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver, Class 2, 6-12 watts,<br />
6-5/8”L x 1-1/2”W x 1-3/16”H<br />
c/UR/us Recognized<br />
<strong>LED</strong>-DR10-350AL<br />
Hardwire constant current (350mA)<br />
<strong>LED</strong> driver, Class 2, 1-10 watts,<br />
4-1/8”L x 1-3/8”W x 1-1/16”H<br />
c/UR/us Recognized<br />
024-3KIT<br />
3 Bullet<br />
Kit<br />
BK = Black<br />
BR = Bronze<br />
CH = Chrome<br />
WH = <strong>White</strong><br />
<strong>LED</strong>-CON3-350, <strong>LED</strong>-CON2-350<br />
Power extension connector, 2-port<br />
and 3-port available, 78” lead wire<br />
(3-port includes one <strong>LED</strong>-END-350)<br />
<strong>LED</strong>-END-350<br />
<strong>LED</strong> end series cap for use with<br />
<strong>LED</strong>-CON2-350 (for single<br />
light systems) or when additional<br />
end series caps are needed<br />
<strong>LED</strong>-CON6-350HW<br />
Hardwire power connection hub<br />
required to complete the series<br />
wiring configuration for sets up<br />
to six<br />
<strong>LED</strong>-CON6-350<br />
Power connection hub, required<br />
to complete the series wiring<br />
configuration for sets up to six<br />
(includes three <strong>LED</strong>-END-350s)<br />
Bill of materials<br />
The <strong>LED</strong> Bullet uses the same layout and series wiring configuration as the <strong>LED</strong> Mini Swivel Series. See page 73 for bill of<br />
materials and installation examples.<br />
Voltage 350ma, 50/60hz dc operation<br />
construction thermal resistant aBs plastic housing with aluminum alloy heat sink<br />
mounting recessed only<br />
Dimensions H = 1/16” (recessed profile), Dia = 1-3/16”<br />
Lead wires 78” length, 24AWG with 350mA molex connector for series wiring configuration<br />
switching use switched outlet to control on/off functions<br />
cut-out 1” hole size for recessed mounting<br />
Wattage 1.25 watts each<br />
maximum run 14 Bullets with led-dr18-350; 12 Bullets with led-dr18-350d<br />
linking accessories are required to power and link the led Bullet (above)<br />
Packaging <strong>White</strong> box<br />
led specs 60,000 hour rated life, 350ma, high power (1 watt) led, 3100°K, 85 cri, 110° beam angle<br />
dimmers dimmable only with led-dr18-350d; see www.americanlighting.com for dimmer compatibility (driver cut sheet)<br />
diffuser clear acrylic integrated led cover<br />
www.americanlighting.com 75
-1/16"<br />
The <strong>LED</strong> THIRTY PUCK is<br />
a popular, energy efficient and economical<br />
alternative that’s also easy to install. Thirty long<br />
life <strong>LED</strong>s produce a warm white 3000°K light that<br />
lasts up to 60,000 hours. The low maintenance<br />
system keeps displays and cabinets cool. <strong>LED</strong><br />
Thirty Pucks are available in Black, Nickel and<br />
<strong>White</strong> finishes and can be recessed or surface<br />
mounted. Three light kits in retail boxes are<br />
compact, popular and convenient for retailers.<br />
Optional trip rings are also available for recessed<br />
applications in corresponding finishes.<br />
Surface Mount Recess Mount<br />
72" lead wire 72" lead wire<br />
72" lead wire<br />
5/32”<br />
(trim ring)<br />
2-9/16"<br />
Diameter<br />
Recess Mount<br />
1-3/4"<br />
cut-out<br />
1-15/16"<br />
Diameter<br />
2-3/4"<br />
(trim ring)<br />
1-1/16"<br />
3/4”<br />
76 www.americanlighting.com<br />
1/16"<br />
5/32”<br />
(trim ring)<br />
12<br />
caBinets disPlay cases retail enVironments<br />
BacK Bar disPlays Wine rooms restaurants<br />
architectural Built-ins entertainment centers<br />
features<br />
• <strong>Warm</strong> 1-3/4" white (3000°K) enhances natural wood tones<br />
cut-out<br />
• Very low power consumption – each puck uses only<br />
1.5 watts<br />
3/4”<br />
• Conventional 12V wiring saves time on the job site<br />
• Low operating 2" temperature keeps displays cool<br />
Diameter<br />
• Optional trim rings available 1/16" in three attractive finishes<br />
• Recess 2-3/4" or surface mount<br />
(trim ring)<br />
• Easy installation – no lamps to install or replace<br />
• No harmful ultraviolet (UV) rays<br />
• Available in three light kits and bulk<br />
• Long life – up to 60,000 hours<br />
DC<br />
P/H
fiXures<br />
Kits<br />
LP30<br />
<strong>LED</strong> Thirty<br />
(Bulk)<br />
LP30KIT<br />
<strong>LED</strong> Thirty Kits<br />
(Retail Box)<br />
accessories<br />
BK = Black<br />
NK = Nickel<br />
WH = <strong>White</strong><br />
BK = Black<br />
WH = <strong>White</strong><br />
technical sPecifications<br />
<strong>LED</strong>-DR-12<br />
Hardwire 12V DC <strong>LED</strong> driver, 25 watts<br />
maximum (up to sixteen LP30s),<br />
c/UR/us Recognized<br />
LPTR5-BK, LPTR5-WH<br />
Plug-in 12V DC power supply, 5<br />
watts maximum (up to three LP30s),<br />
24” 18-gauge lead wire with<br />
connector block, c/UL/us Listed<br />
LPT-BK, LPT-NK, LPT-WH<br />
Decorative trim ring; Available<br />
in BlacK and <strong>White</strong> (plastic); and<br />
NicKel (steel), 5/32”H x 2-3/4” Dia.<br />
Bill of materials<br />
Determine total number of <strong>LED</strong> Thirty puck lights to be<br />
used for the application<br />
For less than three, order puck(s) in bulk and one LPTR<br />
power supply<br />
For three pucks, order a kit (no additional accessories are<br />
required)<br />
For more than three, consider combining kits and bulk to<br />
complete your sets; or if one driver is preferred, order<br />
pucks in bulk and one <strong>LED</strong>-DR-12, for up to sixteen pucks<br />
Optional trim rings available for recessed installations<br />
Bill of materials for a four light system with trim rings:<br />
(4) LP30-BK<br />
(1) <strong>LED</strong>-DR-12<br />
(4) LPT-NK<br />
Voltage 12V DC operation using parallel wiring configuration<br />
construction thermal plastic housing and surface ring; steel spring clips<br />
mounting recessed or sufaced mount<br />
Dimensions H = 1-1/16” (surface mounted), H = 1/32” (recessed profile), Dia = 2-9/16” (surface mounted), Dia = 1-15/16” (recessed)<br />
lead wires 72” length, 18aWg with stripped leads<br />
switching use roll switch on power supply’s cord or locate switched outlet/switch leg to control on/off functions<br />
cut-out 1-3/4” hole size for recessed mounting<br />
Wattage 1.5 watts<br />
maximum run do not connect more than three puck lights to the lPtr-5 power supply; do not connect more than sixteen pucks to<br />
the led-dr-12<br />
Packaging four color retail box with hang tab for kits (offered in Black and <strong>White</strong>); <strong>White</strong> box for bulk units<br />
Power supply 12V dc power supply is included with retail kits. see accessories when ordering bulk pucks<br />
led specs 60,000 hour rated life, thirty 1mm non-replaceable leds, .05 watts each, 3000°K, 80 cri, beam angle is 97°<br />
dimmers not dimmable<br />
diffuser clear integrated plastic lens cover<br />
www.americanlighting.com 77
12V PUCK provide low voltage bright<br />
white light that lasts longer than halogen!<br />
The 12V Xenon Puck (plastic) is available in<br />
three colors: BlacK, CHrome, and WHite and<br />
the 12V Xenon Puck (steel) in four finsihes:<br />
BlacK, Brushed Steel, CHrome, and WHite.<br />
Easy installation for either recessed or surface<br />
mounted applications and full-range dimming<br />
with standard incandescent dimmers make this<br />
bright, dependable puck light user friendly and<br />
reliable. Choose between conveniently sized kits<br />
(plastic only) or bulk (both plastic and steel).<br />
78 www.americanlighting.com<br />
12<br />
AC<br />
P/H<br />
caBinets disPlay cases retail enVironments<br />
entertainment centers architectural Built-ins<br />
BacK Bar disPlays restaurants museums<br />
features<br />
• Bright white light – ideal for many accent<br />
lighting applications<br />
• Dimmable with standard incandescent<br />
dimmers<br />
• Long life 12V lamps included with each puck<br />
light<br />
• Frosted, glare free glass lens diffuses light<br />
evenly<br />
• Recess or surface mount<br />
• Build your own system with single pucks and<br />
a variety of transformer capacities<br />
• Easy to install kits – 2 and 3 light kits include<br />
a pre-wired plug-in transformer
BulK PucKs Kits<br />
044-12<br />
12V Steel<br />
Xenon (bulk)<br />
ALP20<br />
12V Halogen<br />
(bulk)<br />
ALPX20<br />
12V Xenon<br />
(bulk)<br />
accessories<br />
BK = Black<br />
BS = Brushed Steel<br />
CH = Chrome<br />
WH = <strong>White</strong><br />
BK = Black<br />
WH = <strong>White</strong><br />
BK = Black<br />
CH = Chrome<br />
WH = <strong>White</strong><br />
ALTR60PI<br />
<strong>Wall</strong> mount plug-in transformer<br />
12V, 20-60 watts, 24” lead with<br />
<strong>LED</strong>-DR12-350<br />
terminal block, dimmable<br />
Hardwire c/UL/us Listed constant current (350mA)<br />
<strong>LED</strong> driver Class 2, 1-12 watts,<br />
6-5/8”L ALTR60 x 1-1/2”W x 1-3/16”H<br />
c/UR/us Remote plug-in Recognized transformer, 12V<br />
20-60 watts, 24” lead with terminal<br />
block, 8 foot cord and plug<br />
Dimmable, c/UL/us Listed<br />
ALTR120<br />
Remote plug-in transformer, 12V<br />
20-60 watts, (2) 24” leads each with<br />
terminal block, 8 foot cord and plug<br />
Dimmable, c/UL/us Listed<br />
B<br />
B<br />
ALPX<br />
12V Xenon<br />
Kits<br />
20 = One puck*<br />
40 = Two pucks<br />
60 = Three pucks<br />
*ALPX20 is also available in Chrome (ALPX20CH)<br />
Each kit contains an end puck (no tail wire) that<br />
is intended to be the final puck light in a set.<br />
BK = Black<br />
WH = <strong>White</strong><br />
note: all bulk pucks and kits include 20 watt, 12V lamp(s).<br />
ALTPDIM<br />
Hinge or Touch Pad Dimmer<br />
300 watts maximum, 3 levels +<br />
Off; includes touch pad, hinge<br />
lead wire, 5’ power cord and 8’<br />
extension cord, c/UL/us Listed<br />
ALPX20B, AL20B<br />
Twin pack of 20 watt 12V lamps<br />
ALPX20B = xenon (M.O.L. = 1-1/16”)<br />
AL20B = halogen (M.O.L. = 1-3/16”)<br />
Blister card<br />
AL10BX<br />
Twin pack of 10 watt 12V halogen<br />
lamps, blister card<br />
M.O.L. = 1-3/8”<br />
technical sPecifications<br />
Voltage 12V, 60hz ac operation<br />
Construction Heavy-duty, hard durable plastic for ALPX styles; heavy-gauge steel with aluminum reflector for 044-12 series<br />
mounting recessed or surface mount<br />
dimensions 044-12: h = 13/16” (surface), 1/16” (recessed), dia = 2-13/16”; alPX: h = 1-3/8” (surface), 1/2” (recessed), dia = 2-5/8”<br />
lead wires 044-12: 72” length 18aWg, alPX: 48” length 18aWg<br />
switching control primary side of transformer via switched outlet with wall dimmer or switch; control kits with on/off roll switch on cord, or with<br />
wall dimmer or switch, via switched outlet<br />
cut-out 2-1/8” hole size for recessed mounting<br />
Wattage 20 watts per puck<br />
maximum run do not exceed the capacity of the transformer included or selected<br />
linking 12V pucks use standard low voltage (parallel) wiring – each lead homeruns to the transformer<br />
Packaging four color retail blister pack for kits; white box for bulk pucks<br />
lamp specs Xenon: 10,000 hour rated life, 100cri, 3000°K, g4 base, 20 watts, 1-1/16” m.o.l.; halogen: same except 2,000 hour rated life<br />
dimmers Plug-in transformers are compatible with altPdim (hinge/touch Pad dimmer); hardwire installations are dimmable with most<br />
standard incandescent dimmers (requires its own switch leg)<br />
diffuser frosted glass diffuser<br />
www.americanlighting.com 79
120V PUCK lights provide versatile<br />
and dimmable lighting that does not require a<br />
transformer! Up to ten of these economical and<br />
easy to install pucks can be connected and either<br />
surface or recess mounted. Frosted lens covers<br />
eliminate glare and diffuse light evenly for task<br />
and accent lighting applications. Available in<br />
both kits and bulk to build your own plug-in or<br />
hardwire system. Choose between halogen and<br />
long life xenon in four stylish finishes.<br />
1-1/8"<br />
1/2"<br />
surface mount<br />
recess mount<br />
2-1/8"<br />
cut-out<br />
2-5/8"<br />
Diameter<br />
80 www.americanlighting.com<br />
120 AC P/H<br />
Kitchen counters architectural Built-ins<br />
retail enVironments disPlay cases<br />
WorKstations comPuter desKs caBinets<br />
features<br />
• Easy to install kits – simply daisy chain together and<br />
plug in<br />
• Hardwire box available (sold separately) for use when<br />
120V power is stubbed out from the wall<br />
• Dimmable with standard incandescent dimmers<br />
• 120V lamps included, no transformer required<br />
• Frosted twist-lock lens reduces glare<br />
• Link up to ten pucks together<br />
• Recess or surface mount<br />
• Choose between xenon and halogen; kits and bulk<br />
Note: 120V Puck Lights need ventilation to operate properly<br />
without building up heat. Recess mount only where top of<br />
cabinet is not enclosed.
fiXtures<br />
LVPX<br />
120V Xenon<br />
Kits<br />
ALLVP20<br />
120V Halogen<br />
1- Light Kits<br />
accessories<br />
20 = One puck<br />
40 = Two pucks<br />
80 = Four pucks<br />
BK = Black<br />
GD* = Gold<br />
WH = <strong>White</strong><br />
LVPX20** = Xenon (one puck)<br />
ALLVP20 = Halogen (one puck)<br />
technical sPecifications<br />
BK = Black<br />
WH = <strong>White</strong><br />
BK = Black<br />
GD = Gold<br />
WH = <strong>White</strong><br />
*While supplies last<br />
**LVPX20-GD (Gold) is also available, while supplies last<br />
ALSLBOX-WH-B<br />
Slim-line hardwire box,<br />
4”L x 2.5”W x 1”H, with 2 molex<br />
outlets (5 amps each) and On/Off<br />
rocker switch, c/UL/us Listed<br />
ALLVPEX12WH, ALLVPEX24WH<br />
ALLVPEX12, ALLVPEX24<br />
12” or 24” linking extensions to link<br />
up to ten puck lights, 18AWG with<br />
male and female molex connectors<br />
<strong>White</strong> (WH) or Black, c/UL/us Listed<br />
LVPX20BP<br />
Twin pack of 20 watt 120V xenon<br />
lamps, blister pack<br />
M.O.L. = 1-3/8”<br />
B<br />
Bill of materials<br />
Determine installation type (hardwire or plug-in)<br />
For plug-in installations, and use kits and add bulk<br />
pucks and extensions as needed<br />
For hardwire installations, order hardwire box,<br />
bulk pucks, and extensions as needed, allowing for<br />
distances between pucks and to hardwire box<br />
location<br />
Lamps are included with each fixture.<br />
Bill of materials for layout below:<br />
(1) ALSLBOX<br />
(1) ALLVPEX<br />
(1) ALPX40WH<br />
(1) ALPX20WH-B<br />
ALLVP-PC6, ALLVPPC6WH<br />
6’ power cord for 120V puck lights<br />
18AWG with slide on plug, inline<br />
roll switch and molex connector,<br />
Black or <strong>White</strong>, c/UL/us Listed<br />
ALTPDIM<br />
Hinge or Touch Pad Dimmer<br />
300 watts maximum, 3 levels +<br />
Off; includes touch pad, hinge<br />
lead wire, 5’ power cord and 8’<br />
extension cord, c/UL/us Listed<br />
ALLVP20B<br />
Twin pack of 20 watt 120V halogen<br />
lamps, blister pack<br />
M.O.L. = 1-3/8”<br />
Voltage 120V, 60hz ac operation<br />
construction heavy-duty, hard durable plastic<br />
mounting recessed or surface mount<br />
dimensions h = 1-3/8” (surface), 1/2” (recessed), dia = 2-5/8”<br />
lead wires each puck light has 3” lead wire and 3” tail wire with molex connectors for linking purposes. Kits will have one puck light with only a<br />
lead wire (no tail wire) and this puck must be used as the last puck light in the run.<br />
switching control with hardwire box’s rocker switch, switched outlet or with inline switch on power cord<br />
cut-out 2-1/8” hole size for recessed mounting<br />
Wattage 20 watts per puck<br />
Power cord single puck kits include a six-foot 18aWg power cord; kits with multiple puck lights include a six-foot power cord<br />
and enough 12” linking extensions to daisy chain pucks to each other<br />
maximum run do not link more than ten puck lights in any single run<br />
linking Kits include 12” linking extension(s) to connect puck lights. to build a bulk system, order linking extensions (interconnectable up to 5)<br />
Packaging four color retail blister pack for kits; two color box for bulk<br />
lamp specs 120V xenon = 3100°K <strong>White</strong>, 8,000 hours, 1-3/16” m.o.l.; 120V halogen = 2800°K <strong>White</strong>, 2,500 hours, 1-3/16” m.o.l.<br />
dimmers Plug-in transformers are compatible with altPdim (hinge/touch Pad dimmer). hardwire installations are dimmable with<br />
most standard incandescent dimmers (requires its own switch leg).<br />
diffuser frosted glass diffuser<br />
www.americanlighting.com 81
P = Plug-in<br />
H = Hardwire<br />
LPL-DR10-300PI<br />
What is the difference between power<br />
supplies, transformers and drivers?<br />
• "Power supplies" is a general term for anything<br />
that provides a regulated output for lighting loads. A<br />
somewhat similar example of this is a ballast, which is<br />
the power supply for fluorescent and HID sources. <strong>LED</strong><br />
power supplies convert 120V AC input to regulated DC<br />
output (typically 12V DC or 24V DC) to provide the best<br />
operating condition for the <strong>LED</strong> to last its full life.<br />
• Transformers step down the 120V AC input to 12V<br />
or 24V AC output and although they have circuit<br />
protection, they do not regulate the output from<br />
voltage spikes.<br />
• Drivers are power supplies for <strong>LED</strong> loads. They<br />
are available in both constant current and constant<br />
voltage types and they isolate the <strong>LED</strong>s from line<br />
voltage spikes.<br />
82 www.americanlighting.com<br />
<strong>LED</strong>-DR10-350PI<br />
<strong>LED</strong>-DR10-350AL, <strong>LED</strong>-DR12-350<br />
<strong>LED</strong>-DR18-350,<strong>LED</strong>-DR18-350D<br />
LPTR5-BK, LPTR5-WH<br />
<strong>LED</strong>-DR12-700, <strong>LED</strong>-DR18-700<br />
<strong>LED</strong>-DR36-700D<br />
<strong>LED</strong>-DR-12, <strong>LED</strong>-DR60-12<br />
<strong>LED</strong>-DR100-12<br />
PS-18-12VPI, PS-36-12VPI<br />
PS-60-12VPI<br />
<strong>LED</strong>-TR driver series<br />
<strong>LED</strong>-DR-24, <strong>LED</strong>-DR60-24<br />
<strong>LED</strong>-TR driver series<br />
ALTR series (electronic)<br />
TRE series (electronic)<br />
TR series (magnetic)<br />
Type of Output<br />
300mA 350mA 350mA 700mA 12V DC 12V DC 12V DC 12V DC 24V DC 24V DC 12V 12V 12V 24V 24V<br />
Product<br />
Page Constant Current<br />
Regulated DC Voltage<br />
AC Voltage<br />
4-Wire 24V (<strong>LED</strong>) 40,42 H<br />
Bandolier (<strong>LED</strong>) 44 H P<br />
Bullet (<strong>LED</strong>) 74 H P<br />
Clear Flex (<strong>White</strong> and RGB) 32,34 H H<br />
Crystal Tube Light (Incand.) 48 P / H H H H H<br />
Crystal Tube Light (<strong>LED</strong>) 48 H<br />
Festoon Light String (Xenon) 64 H<br />
Festoon Light String (<strong>LED</strong>) 64 H<br />
High Power Swivel (<strong>LED</strong>) 70 H<br />
<strong>LED</strong> Festoon (FSL-WW-12, -24) 46 H H H H H H<br />
<strong>LED</strong> Thirty 76 P / H H<br />
Lightstar Reel (<strong>LED</strong>) 65 H H<br />
Linear Accent Series (Xenon) 46 P / H H H H H<br />
Micro Neon Flexbrite (<strong>LED</strong>) 38 H H H<br />
Mini 2-Wire (<strong>LED</strong>) 49 H H H<br />
Mini Step Light (<strong>LED</strong>) 66 H P<br />
Mini Swivel Series (<strong>LED</strong>) 72 H P<br />
Puck Light (<strong>LED</strong>) 68 P<br />
Puck Light (12V) 78 P / H H H<br />
Rope 12V (Incandescent) 45 P / H H H H H<br />
Rope 12V (<strong>LED</strong>) 51 H H H H H<br />
Ruler (<strong>LED</strong>) 28 H P<br />
how far away can the power supply be?<br />
TRE series (electronic)<br />
• If you locate a power supply too far away the last<br />
light bulb or <strong>LED</strong> in a lighting system, you will end<br />
up with a noticeably dimmer output at the end of<br />
the run than at the beginning. This is called voltage<br />
drop. In the case of <strong>LED</strong>s, relatively small wattages<br />
are involved, which helps the voltage maintain its<br />
strength for longer than conventional low voltage<br />
systems.<br />
In general, these are the guidelines for avoiding<br />
voltage drop:<br />
• For <strong>LED</strong> systems, use 16-gauge or better lead wire<br />
and keep the power supply within 35 feet of the last<br />
<strong>LED</strong> (42.8 for <strong>LED</strong>-4WR-24V)<br />
• For incandescent systems powered with electronic<br />
transformers, use 12-gauge wire or better and keep<br />
the power supply within 10 feet of the last lamp.<br />
• For incandescent systems powered with magnetic<br />
transformers, use 12-gauge wire or better and keep<br />
the power supply within 25 feet of the last lamp.<br />
TR series (magnetic)
features<br />
• Dimmable with most standard incandescent or<br />
low voltage magnetic dimmers<br />
• Whisper quiet operation<br />
• Compact size – innovative design has reduced overall size<br />
• Efficient and dependable: 94% efficiency rating<br />
• Easy hardwire installation – enclosed with multiple<br />
knockouts available<br />
• Magnetic circuit breakers protect each circuit<br />
• NEMA 3R rating for indoor and outdoor use<br />
• Boost tap for longer runs<br />
• Stainless steel enclosure with black powder coat finish<br />
• Three year warranty<br />
transformers<br />
TR<br />
Magnetic<br />
Transformers<br />
12<br />
24<br />
AC<br />
150 = 150 watts<br />
300 = 300 watts<br />
600 = 600 watts<br />
900 = 900 watts<br />
1200 = 1200 watts<br />
H<br />
12 = 12 volt<br />
24 = 24 volt<br />
features<br />
• Dimmable with most low voltage magnetic dimmers<br />
• 12V DC and 24V DC regulated output; 30, 60 and 100<br />
watt capacity (150 watt capacity available in 24V DC)<br />
• 40% minimum load, requires 12" clearance above<br />
and around housing if load exceeds 80%<br />
• Thermal self-reset current circuit breaker provides<br />
reliable overload protection<br />
• Stainless steel housing features powder coat finish,<br />
hang tab and standard knockouts<br />
• Highly efficient<br />
• c/UL/us rated for indoor and outdoor use<br />
(<strong>LED</strong>-TR-30-12 and <strong>LED</strong>-TR-30-24 are not c/UL/us listed)<br />
• Three year warranty<br />
led driVers<br />
<strong>LED</strong>-TR<br />
<strong>LED</strong><br />
Magnetic<br />
Drivers<br />
30 = 30 watts*<br />
60 = 60 watts<br />
100 = 100 watts<br />
150 = 150 watts<br />
*<strong>LED</strong>-TR-30-12 and <strong>LED</strong>-TR-30-24 are not c/UL/us listed.<br />
technical sPecifications<br />
Voltage 120V input, 60hz ac operation for transformers, 120V input, 120hz ac output for drivers<br />
Construction Stainless steel enclosure with hinged tension fit door, hang tab, multiple 1/2" knockouts and reset switch<br />
mounting Vertical or horizontal mount using hang tabs<br />
dimensions tr-150: 8-1/2”l x 3-1/2”W x 3-1/2”h, tr-300: 9”l x 4-1/2”W x 4-1/2”h, tr-600: 9/1-2”l x 4/1-2”W x 4-1/2”h,<br />
tr-900: 10-1/2”l x 5-1/2”W x 5-1/2”h, tr-1200: 10-1/2”l x 6-1/2”W x 6-1/2”h<br />
Wattage do not exceed the maximum capacity of the transformer, but you can use up to 100% of its capacity. When using magnetic<br />
drivers, a 40% minimum load is required. do not connect 120V power to the input side of the transformer without<br />
a secondary load attached – this may damage the secondary coil and cause it to fail.<br />
Packaging carton<br />
dimmers led drivers are dimmable with most low voltage magnetic dimmers. transformers dim well with most standard<br />
incandescent dimmers. Be sure to use high capacity dimmers for loads over 600 watts.<br />
12<br />
24<br />
DC<br />
12 = 12 volt<br />
24 = 24 volt<br />
www.americanlighting.com 83<br />
H<br />
*
12V dc & 24V dc hardWire<br />
<strong>LED</strong>-DR-12 or <strong>LED</strong>-DR-24 (Class 2 hardwire driver)<br />
6-1/4”l x 1-1/4”W x 1-13/16”h<br />
constant voltage, 12V or 24V dc, 1-25 watts<br />
use with 14aWg (min) supply wire, copper conductors only<br />
c/ur/us recognized<br />
<strong>LED</strong>-DR60-12 or <strong>LED</strong>-DR60-24 (Class 2 hardwire driver)<br />
7-13/16”l x 1-3/4”W x 1-5/8”h<br />
constant voltage, 12V or 24V dc, 1-60 watts<br />
use with 14aWg (min) supply wire, copper conductors only<br />
c/ur/us recognized; Enclosure (ENCL-11) sold separately<br />
<strong>LED</strong>-DR100-12 (hardwire driver)<br />
9”l x 2-9/16”W x 1-5/8”h<br />
constant voltage, 12V dc, 1-100 watts<br />
15” 3c 18aWg input leads<br />
15” 2c 16aWg output leads<br />
use with 14aWg (min) supply wire, copper conductors only<br />
c/ur/us recognized<br />
84 www.americanlighting.com<br />
12V dc Plug-in<br />
PS-18-12VPI (plug-in power supply)<br />
3-1/4”l x 1-7/8”W x 1”h<br />
constant voltage, 12V dc, 1-18 watts<br />
6 foot 18aWg lead wire with dc jack<br />
6 foot 18aWg power cord with 2-prong, polarized plug,<br />
c/ul/us listed<br />
PS-36-12VPI (plug-in power supply)<br />
4-3/4”l x 1-1/2”W x 2-5/16”h<br />
constant voltage, 12V dc, 1-36 watts<br />
5 foot 18aWg lead wire with dc jack<br />
6 foot 18aWg power cord with 3-prong, grounded plug,<br />
c/ul/us listed<br />
PS-60-12VPI (plug-in power supply)<br />
4-3/4”l x 1-1/2”W x 2-5/16”h<br />
constant voltage, 12V dc, 1-60 watts<br />
5 foot 18aWg lead wire with dc jack<br />
6 foot 18aWg power cord with 3-prong, grounded plug,<br />
c/ul/us listed<br />
DC<br />
12<br />
P/H
<strong>LED</strong>-DR10-350AL (Class 2, hardwire driver)<br />
4-1/8”L x 1-3/8”W x 1-1/16”H<br />
constant current, 350ma, 1-10 watts<br />
14 aWg, 75° min supply wire; copper conductors only<br />
c/ur/us recognized<br />
<strong>LED</strong>-DR12-350 (Class 2, hardwire driver)<br />
6-5/8”l x 1-1/2”W x 1-3/16”h<br />
constant current, 350mA, 6-12 watts<br />
Primary side has quick connect for 120V line and<br />
neutral connections; secondary side features built-in<br />
molex port and separate terminal block for bare leads<br />
c/ur/us recognized<br />
<strong>LED</strong>-DR18-350 (Class 2, hardwire driver)<br />
6”l x 2-5/8”W x 1-3/16”h<br />
constant current, 350mA, 10-18 watts<br />
Primary side has quick connect for<br />
120V line and neutral connections and ground wire;<br />
secondary side features built-in molex port and separate<br />
terminal block for bare leads, c/ur/us recognized<br />
LPL-DR10-300PI (Plug-in driver)<br />
2-3/4”l x 2”W x 1”h<br />
constant current, 300mA, 1-10 watts<br />
includes one rca-JBoX<br />
for use with lPl puck lights only<br />
38” 20aWg lead wire with dc jack<br />
5 foot power cord, 2-blade plug<br />
c/ul/us listed<br />
300 350 700 DC<br />
P/H<br />
<strong>LED</strong>-DR12-700 (Hardwire driver)<br />
6-5/8”l x 1-1/2”W x 1-3/16”h<br />
constant current, 700mA, 3-12 watts<br />
Primary side has quick connect for 120V connections;<br />
secondary side features built-in molex port and separate<br />
terminal block for bare leads, c/ur/us recognized<br />
<strong>LED</strong>-DR18-700 (Hardwire driver)<br />
6”l x 2-5/8”W x 1-3/16”h<br />
constant current, 700mA, 3-18 watts<br />
Primary side has quick connect for<br />
120V line and neutral connections and ground wire;<br />
secondary side features built-in molex port and separate<br />
terminal block for bare leads, c/ur/us recognized<br />
<strong>LED</strong>-DR18-350D (3-12 leds) (Class 2, hardwire driver)<br />
<strong>LED</strong>-DR36-700D (1-8 leds) (Class 2, hardwire driver)<br />
Dimmable!<br />
7-1/8”l x 1-3/4”W x 1-1/4”h<br />
constant current, 350mA or 700mA, 3-12 leds<br />
ul recognized; Enclosure (ENCL-11) sold separately<br />
11-1/2"L x 1-7/8"W x 1-3/4"H<br />
see below for compatible lutron dimmers.<br />
Lutron Control Dimming Range<br />
diva dimmer 100% to 13%<br />
grafiK eye 3000 100% to 12%<br />
homeWorks dimmer 97% to 12%<br />
homeWorks Panel 100% to 12%<br />
lP Panel 100% to 12%<br />
nova dimmer 100% to 12%<br />
nova t* dimmer 100% to 12%<br />
radiora 2 dimmer 100% to 12%<br />
skylark dimmer 100% to 13%<br />
skylark system dimmer 100% to 12%<br />
www.americanlighting.com 85
features<br />
• Dimmable with most standard incandescent or low<br />
voltage dimmers<br />
• Whisper quiet operation<br />
• Small compact size fits well in tight spaces such as coves<br />
• Efficient and dependable, with a four year warranty<br />
• Easy installation – end knockouts on enclosed versions<br />
• Overload and short circuit protection<br />
• Stainless steel enclosure with black powder coated finish<br />
• Use for shorter runs (10 feet maximum)<br />
fiXtures<br />
TRE<br />
Electronic<br />
Transformers<br />
75* = 75 watts<br />
150 = 150 watts<br />
300 = 300 watts<br />
* TRE-75 transformers are not enclosed<br />
technical sPecifications<br />
Voltage 120V input, 60hz ac operation<br />
construction stainless steel enclosure with removable lid, with six knockouts on 150-watt and 300-watt styles and auto reset<br />
mounting n/a<br />
dimensions tre-75: 2”l x 1-1/4”W x 3/4”h, tre-150: 6-1/2”l x 1-1/2”W x 1-1/2”h, tre-300: 9-1/2”l x 1-1/2”W x 1-1/2”h,<br />
Wattage do not exceed the maximum capacity of the transformer, but you can use up to 100% of its capacity. electronic<br />
transformers need to have at least 30% of the rated capacity attached to recognize a load and function properly.<br />
Packaging carton<br />
dimmers dimmable with most standard incandescent dimmers and low voltage electronic dimmers. Be sure to use high capacity<br />
dimmers for loads over 600 watts.<br />
86 www.americanlighting.com<br />
12 = 12 volt<br />
24 = 24 volt<br />
12<br />
24<br />
AC<br />
H
hardWire<br />
• Dimmable with most standard incandescent and<br />
electronic low voltage dimmers<br />
• 7” 18AWG primary and 5” 12AWG secondary leads<br />
• Thermal protection with auto reset<br />
• Mounting screw(s) included<br />
• c/UR/us Recognized<br />
12V, ac, 10-60 watts, class 2<br />
ALTR60B<br />
2-1/4”l x 1-5/16”W x 7/8”h<br />
12V, ac, 20-80 watts<br />
ALTR80B<br />
2-1/4”l x 1-5/16”W x 7/8”h<br />
12V, ac, 35-105 watts<br />
ALTR105B<br />
4-5/16”l x 1-7/8”W x 1-1/4”h<br />
12V, ac, 45-150 watts<br />
ALTR150B<br />
4-5/16”l x 1-7/8”W x 1-1/4”h<br />
Plug-in<br />
• Dimmable with most standard incandescent and<br />
electronic low voltage dimmers<br />
• Polarized plug and connector block(s) included<br />
• Thermal protection with auto reset<br />
• Mounting screw(s) included<br />
• c/UL/us Listed<br />
ALTR60PI (wall mount transformer)<br />
3-1/2”l x 1-3/4”W x 2-1/4”h(with plug)<br />
12V, 20-60 watts, class 2<br />
36” 18aWg lead with inline roll switch<br />
and connector block<br />
ALTR60 (remote mount transformer)<br />
4”l x 1-3/4”W x 1-3/16”h<br />
12V, 20-60 watts, class 2<br />
24” 18aWg lead with connector block<br />
8 foot 18aWg power cord with inline switch<br />
Blister pack<br />
ALTR120 (remote mount transformer)<br />
6-3/4”l x x 1-3/4”W x 1-3/16”h<br />
two 12V, 20-60 watts, class 2 transformers<br />
two 24” 18aWg leads each with<br />
connector block<br />
one eight foot 18aWg power cord with<br />
inline switch<br />
Blister pack<br />
12<br />
AC<br />
P/H<br />
www.americanlighting.com 87
RNLS-1 (<strong>White</strong>) / RNLS-1A (Almond)<br />
• Louver style lens cover reduces glare<br />
• Photocell – turns light on at dusk, off at dawn<br />
• On/Off switch for maximum control<br />
• 8,000 hour 120V xenon bulb (replacement<br />
is lXcP-10BP)<br />
• Requires a deep single gang box<br />
• Available in <strong>White</strong> and Almond<br />
RNLS-3<br />
• Louver style lens cover reduces glare<br />
• 15A power outlet added for convenience<br />
(120V ac)<br />
• Photocell – turns light on at dusk, off at dawn<br />
• 60,000 hour <strong>White</strong> (3500oK) led light source<br />
• Fits a standard single gang box<br />
• Available in <strong>White</strong><br />
DIMMERS<br />
ALDIMF500BK<br />
• Sturdy, easy to use foot slide dimmer<br />
• Use with 120V halogen, xenon and<br />
incandescent lamps<br />
• Fused protection – 500 watts maximum<br />
• Blister pack<br />
88 www.americanlighting.com<br />
120<br />
AC<br />
H<br />
120<br />
AC<br />
H<br />
RNLS-2 (<strong>White</strong>) / RNLS-2A (Almond)<br />
• Hooded cover eliminates glare<br />
• Photocell – turns light on at dusk, off at dawn<br />
• On/Off switch for maximum control<br />
• 8,000 hour 120V xenon bulb (replacement<br />
is lXcP-10BP)<br />
• Requires a deep single gang box<br />
• Available in <strong>White</strong> and Almond<br />
RNLS-4<br />
• Hooded cover eliminates glare<br />
• 15A power outlet added for convenience<br />
(120V ac)<br />
• Photocell – turns light on at dusk, off at dawn<br />
• 60,000 hour <strong>White</strong> (3500°K) <strong>LED</strong> light source<br />
• Fits a standard single gang box<br />
• Available in <strong>White</strong><br />
ALTPDIM<br />
• Easy to install hinge or touch pad dimmer<br />
• Use with 120V Halogen, xenon and<br />
incandescent lamps<br />
• Touch pad controls 3 levels plus off<br />
• Attach up to three standard (2-blade)<br />
plug-in lamps to 8 foot extension cord<br />
• 300 watts maximum for plug-in applications only<br />
• Not recommended for direct wire applications<br />
120<br />
AC<br />
H<br />
120<br />
AC<br />
H
Item Page Item Page Item Page<br />
018 SERIES 58 FLEXBRITE, RGB NEON 36 LS SERIES 104<br />
023-0001 66 FOOT DIMMER 88 LT8 SERIES 12<br />
024 SERIES 74 FSL ACCESSORIES/LAMPS 47 LVPX SERIES 30<br />
033 SERIES 56,60 FSL SERIES 46 LVPX20BP 33,131<br />
034 SERIES (SEE O33 SERIES) HALOGEN 120V PUCK LIGHT 81 LW36 SERIES 40<br />
035-S14-<strong>LED</strong> LAMPS 63 HALOGEN 12V PUCK LIGHT 83 LW36 ACCESSORIES 43<br />
037 ACCESSORIES 61 HIGH POWER SWIVEL SERIES 70 LXC SERIES 24<br />
042 SERIES 58 HPS SERIES 70 MAGNETIC TRANSFORMERS 83<br />
043 ACCESSORIES 17,21,23 INCANDESCENT ROPE LIGHT 56,58,60 MICRO NEON FLEXBRITE 38<br />
043A ACCESSORIES 17,21,23 LCL SERIES 26 MINI 2-WIRE, <strong>LED</strong> 49<br />
043T SERIES 18 LD6 SERIES (LD4 COMING SOON) 14 MINI STEP LIGHT, <strong>LED</strong> 66<br />
043X SERIES 24 <strong>LED</strong> 4590 SERIES 26 MINI SWIVEL, <strong>LED</strong> 72<br />
044 SERIES 78 <strong>LED</strong> 4-WIRE 40,42 MINI VISOR, <strong>LED</strong> 72<br />
120V PUCK LIGHT 80 <strong>LED</strong> 4-WIRE RGB 56 MR-11 LAMPS 47<br />
120V XENON UNDER CABINET 22,24 <strong>LED</strong>-4WR SERIES 40,42 MR-11/16A 47<br />
12V HALOGEN PUCK LIGHT 78 <strong>LED</strong> BANDOLIER 44 NEON FLEXBRITE, <strong>LED</strong> 38<br />
12V STEEL PUCK LIGHT 78 <strong>LED</strong> BULBS 12,63 NIGHT LIGHTS, RECESSED 88<br />
12V XENON PUCK LIGHT 78 <strong>LED</strong> BULLET 74 NON-RATED ROPE LIGHT 60<br />
4590 SERIES 26 <strong>LED</strong> CLEAR FLEX 32,34, OUTDOOR <strong>LED</strong> STEPLIGHT 67<br />
AL10BX 79 <strong>LED</strong> CRYSTAL TUBE LIGHT 48 PC EXTRUSION 48<br />
AL20B 79 <strong>LED</strong>-DL SERIES 54 PLUG-IN TRANSFORMERS 87<br />
ALDIMF500BK 88 <strong>LED</strong>-DL SERIES (12V) 55 POWER SUPPLIES, 12V DC 84<br />
ALFLT4 SERIES (SEE ALT2 SERIES) 38 <strong>LED</strong> DR SERIES DRIVERS 84,85 POWER SUPPLY MATRIX 82<br />
ALLVP SERIES 81 <strong>LED</strong> DRIVERS, CONSTANT CURRENT 85 PREMIUM GRADE ROPE LIGHT KITS 59<br />
ALP SERIES 79 <strong>LED</strong> FLEXBRITE 50,52 PRIORI T2 FLUORESCENT 18<br />
ALPX SERIES 78 <strong>LED</strong> FLEXBRITE KITS 52 PRIORI XENON 22<br />
ALSLBOX 79 <strong>LED</strong> MICRO NEON FLEXBRITE 39 PS SERIES POWER SUPPLIES 84<br />
ALSLBOX-WH-B 31,79 <strong>LED</strong> MINI 2-WIRE 49 PUCK LIGHTS, INCANDESCENT 78,80<br />
ALT2 SERIES 30 <strong>LED</strong> MINI STEP LIGHT 66 PUCK LIGHTS, <strong>LED</strong> 68,76<br />
ALTPDIM 79,81 <strong>LED</strong> MINI SWIVEL SERIES 72 PU-EXTRUSION 48<br />
ALTR SERIES 79,81,87 <strong>LED</strong> MINI VISOR 72 RCA-EX24 44,68<br />
B10S11-(COLOR) 63 <strong>LED</strong> NEON FLEXBRITE (ECON. & PLUS) 38 RCA-JBOX (SEE <strong>LED</strong>-DR10-300PI)<br />
B11S14-(COLOR) 63 <strong>LED</strong> NIGHT LIGHTS 88 RCA-Y 44<br />
B7.5C-(COLOR) 63 <strong>LED</strong> PUCK 68 RECESSED DOWNLIGHTS, <strong>LED</strong> 14,15<br />
BS-NATURAL 48 <strong>LED</strong> RECTANGULAR FLEXBRITE 40,42 RECESSED NIGHT LIGHTS 88<br />
BULBS, <strong>LED</strong> 63 <strong>LED</strong> RECTANGULAR RGB 42 RECTANGULAR FLEXBRITE, <strong>LED</strong> 40,42<br />
BULBS, LONG LIFE 63 <strong>LED</strong> ROPE LIGHT 50,52,54 RGB <strong>LED</strong> 4-WIRE 40<br />
BULK <strong>LED</strong> ROPE LIGHT 54 <strong>LED</strong> RULER 28 RGB <strong>LED</strong>NF 36<br />
BULK ROPE LIGHT 60 <strong>LED</strong> STEPLIGHT 67 RGB NEON FLEXBRITE 36<br />
CE-NATURAL 48 <strong>LED</strong> THIRTY 76 RGB RECTANGULAR FLEXBRITE 40<br />
CF-NATURAL 48 <strong>LED</strong> WALL WASHER 4,10,11 RL-TRK-3 53,59<br />
CFX2 SERIES 32 <strong>LED</strong>-4WR ACCESSORIES 41,43 RNLS SERIES 88<br />
CFX4 SERIES 34 <strong>LED</strong>-4WR CONTROLLERS 41 ROPE LIGHT, <strong>LED</strong> 50,52,54<br />
COLOR-CHANGING <strong>LED</strong> 4-WIRE 40 <strong>LED</strong>-4WR SERIES 40,42 ROPE LIGHT, UL LISTED 50,52,56,58<br />
COLOR-CHANGING NEON FLEXBRITE 36 <strong>LED</strong>-CON2,-CON3, ETC 71,73,75 RULER ACCESSORIES 29<br />
COMMERCIAL GRADE LIGHT STRING 62 <strong>LED</strong>-DL SERIES 55 RULER SERIES 28<br />
COMMERCIAL GRADE ROPE LIGHT KITS 58 <strong>LED</strong>-DR SERIES 84,85 SGL SERIES 67<br />
CONSTANT CURRENT DRIVERS 85 <strong>LED</strong>-END-350, -700 71, 73, 75 ST-1003 SERIES 48<br />
CRYSTAL TUBE LIGHT 48 <strong>LED</strong>-MDF SERIES 49 STEEL PUCK LIGHT 68,78<br />
CRYSTAL TUBE LIGHT, <strong>LED</strong> 48 <strong>LED</strong>-NF,-NF-M, -NFPLUS SERIES 38 ST-<strong>LED</strong>-1003 SERIES 48<br />
CS-NATURAL 48 <strong>LED</strong>NF-RGB SERIES 36 SUPER NEON (NEON FLEXBRITE PLUS) 38<br />
CUSTOM CUT <strong>LED</strong> FLEXBRITE 50 <strong>LED</strong>-RGB-3S SERIES 35,37,41 T2 ULTRA THIN 30<br />
CUSTOM CUT ROPE LIGHT 50,56 <strong>LED</strong>SNF ACCESSORIES 53 T8 TUBES, <strong>LED</strong> 12<br />
DC POWER SUPPLIES 84 <strong>LED</strong>SNF SERIES (NEON FLEXBRITE PLUS) 50 TL-CONBKL2 66,72,74<br />
DL-CLIP/SCREW 51,53,55,57,59,61 LF SERIES (SEE <strong>LED</strong>-DL SERIES) TOUCHPAD DIMMER 78,80<br />
DL-END 81,87,99 LFS SERIES 64 TR SERIES (SEE ALSO MATRIX, P. 82) 83<br />
DL-ST 81,87,99 LIGHT STRING, FESTOON 64 TRANSFORMERS, ELECTRONIC 86,87<br />
DL-TRACK-4 51,53,55,57,59,61 LINE VOLTAGE PUCK LIGHT 80 TRANSFORMERS, MAGNETIC 83<br />
DRIVERS, <strong>LED</strong> 83,84,85 LINE VOLTAGE XENON UNDER CABINET 22,24 TRE SERIES 86<br />
E6 SERIES (E4 COMING SOON) 15 LINEAR ACCENT SERIES 46 ULRL-CONKIT-INCSHELL 57<br />
ELECTRONIC TRANSFORMERS 86,87 LMS SERIES 72 ULRL-CONKIT-<strong>LED</strong>SHELL 51<br />
FESTOON LIGHT STRING 64 LMV SERIES 72 ULRL-<strong>LED</strong> SERIES 50<br />
FESTOON STRIP (SEE LINEAR ACCENT) 46 LONG LIFE BULBS 63 ULTRA THIN FLUORESCENT 30<br />
FLEXBRITE, 4-WIRE 40,42 LP30 SERIES 76 WALL WASHER, <strong>LED</strong> 4,10,11<br />
FLEXBRITE, COLOR-CHANGING NEON 36 LPL SERIES 68 WARM WHITE WALL WASHER 10,11<br />
FLEXBRITE, <strong>LED</strong> 50,52 LPT ACCESSORIES 77 XENON 120V PUCK LIGHT 80<br />
FLEXBRITE, MINI NEON 38 LR-CLIP-20 79 XENON 120V UNDER CABINET 24<br />
FLEXBRITE, NEON PLUS & ECONOMY 38 LRL SERIES (SEE RULER) XENON 12V PUCK LIGHT 78<br />
FLEXBRITE, RECTANGULAR 40,42 LR-<strong>LED</strong>-EXT3 79 XENON NIGHT LIGHT 88<br />
Product sPecifications<br />
For latest product information, updates, instructions and details concerning specifications, colors, finishes, performance, installation and design, visit<br />
www.americanlighting.com. color may vary from the color printed herein due to limitations in photographic and printing processes. american lighting inc.<br />
reserves the right to change product specifications without notice. Other product specifications such as color temperature, wavelength, characteristics and<br />
lumen output are subject to production limitations and may vary.<br />
led technology is changing rapidly, and not all color temperatures and performance levels can be duplicated at a later time. Best practices include<br />
purchasing 10-15% more for a particular project on the same initial order where white led color temperatures must be maintained over project and<br />
product life. eventual product replacement should be considered at time of design, layout and initial purchase.<br />
average incandescent bulb life, rated life and average life are terms used to describe the number of hours at which half of lamps have failed. for leds, the<br />
hours of rated life specify the point where 70% of original lumen output is reached. Below this point the effective life is over however, the led will still emit<br />
light. see information about series parallel wiring, which applies to both led and incandescent linear products (page 57). american lighting inc warrants<br />
its product to the original purchaser only. contact your sales representative for warranty details.<br />
www.americanlighting.com 89