rent. purchase. calibrate. - TR Corporation

ent.
purchase.
calibrate.

When the leading names in industry need test equipment they come
to TechRentals.
Trusted to deliver you the right equipment to get your job done right first
time, we’ll offer flexible solutions from an inventory of over 10,000 items
from respected manufacturers including Fluke, Agilent, Panametrics, Hioki,
Anritsu, Megger, Tektronix and Yokogawa.
With over 20 convenient locations across Australasia, you can rely on
our knowledgeable team to tailor flexible equipment solutions for your
projects, short or long. Depending on your needs that might include; rental,
purchase, rent-to-own, or even a total asset management package which
includes calibration and maintenance.
With over 33 years experience, we understand that you need the right gear,
at a competitive price, delivered when and where you need it. And it needs
to work first time. Plus we know you’ll appreciate our “no risk guarantee”
should the equipment be found unsuitable for the specified task within
24 hours.
This understanding is what makes TR the choice of equipment managers,
engineers and business owners around the region.

HoW to Use tHIs GUIDe
There are various ways to find the equipment
you need:
>
>
>
>
by product category – use the
contents (on this page) to see our
key product categories
by industry application – use our qu ck
find gu de (page vi) to assist identifying
your needs
by manufacturer or product code
– use the manufacturers ndex
(page 76) to see products from a specific
manufacturer
by keyword – use the general ndex
(page 78)
Still can’t find what you are looking for
or need some technical advice? Call our
helpful customer service team.
australia 1800 632 652
new zealand 0800 832 473
malaysia 603 5632 1135
neW Items
As technology evolves, manufacturers often
upgrade their equipment. It’s important
that we keep up-to-date with these
advancements, so scattered throughout
this guide you will find:
This identifies all the NEW products that
we’ve added to our inventory in the last
twelve months.
contents
flexible options ii
ten reasons to rent iii
office locations iv
calibration v
quick find guide vi
electron cs & data 1
> digital storage oscilloscopes > probes & accessories > multimeters
& electrometers > dc power supplies > function generators > pulse
generators > lcr meters > electrical calibrators > prom programmers
> logic/analysers/testers > frequency response analysers > frequency
counters > rf signal generators > rf sweep generators > rf amplifiers
> high frequency spectrum analysers > network analysers/antenna
& cable test > field strength meters & antennas > emc test equipment
> communications test sets > power meters & sensors - rf > filters
> rf accessories > lf signal generators > distortion analysers
> rf attenuators > tv test equipment > telecommunications > lan
analysers/management > lan/wan analysers > wan analysers > lan
cable testers > fibre optics > cable/pipe testers & locators
electr cal power 21
> magnetic field meters - gauss tesla > insulation/condition/resistance
testers > power analysers & recorders > protection relay testing
systems > hi pot testers > electrical transducers > electrical testers
> current injectors > power line conditioner/ups > power transformers
> ac sources/inverters/generators
general ndustr al 39
> data loggers > instrumentation amplifiers > memory recorders
> strip chart recorders > voltage current recorders > plotter printer
> pressure & humidity transducers > distance measurement &
surveying > tachometers/stroboscopes > endoscopes > microscopes
> high speed video > pressure vacuum gauges/recorders > position
transducers > inclinometers > force gauges > load cells > materials
testing > scales & balances > vibration & alignment analysis > gloss
measurement > automotive > non-destructive testing > concrete
testing equipment > hardness testers > industrial calibrators
> ultrasonic baths > environmental test chambers/ovens > temperature
meters/ir thermometers > temperature/humidity/barometric recorders
> thermal imaging cameras > humidity & moisture meters > metal
detectors > retail traffic flow counters > security equipment
env ronmental 63
> liquid flow meters > gas flow meters > air flow measurement/air
quality > air conditioning balancing instruments > leakage detectors
> weather stations > light & uv measurement > sound signal analysis
> noise & sound analysers > oh&s and environmental > gas analysis
& monitoring > electrochemistry, water quality > spectroscopy
> materials testing
manufacturers index 76
general index 78

Whether it’s a short term project, or you’re outfitting a new facility – we’ll
work with you to determine the most appropriate test equipment option
for your business. Delivering a solution offering flexibility, practicality
and affordability.
casual rental
When you need equipment for one day, a week or even a few months, you’ll find our casual
rental both convenient and flexible. Our competitive daily and monthly rates can be extended
if required, offering a hassle-free solution for short term or unanticipated use.
project rental
A rental package can be tailored to suit the specific needs of projects small or large, helping
you deliver yours on time and within budget. The rates will be based on the length of your
project and additonal equipment can be added to your contract as, or if it’s needed.
long term rental
Long term rental is a practical option for businesses to acquire equipment they use
frequently, usually for periods greater than three months. Our long term monthly rates are
very competitive and you’ll receive full product support. Should your needs change you can
return, upgrade or even purchase the equipment.
rental w th opt on to purchase
We also offer flexible rental solutions for those wanting an option to purchase in the future.
This is available on both new and ex-rental equipment, with a warranty on all.
rental purchase opt on (RPo) - Austral a & malays a
With RPO, rent the equipment for a fixed period (typically 12/24/36 months), with the
equipment yours after a final payment equal to one months rental.
rental w th an opt on to sell (Ros) - new Zealand
With ROS, rent the equipment for a fixed period (typically 12 - 23 months) and at the
end we may offer to sell the equipment to you for a single final payment generally equal
to one months rental rate.
purchase ex-rental
We also offer competitve purchase options on well maintained ex-rental equipment
from leading name manufacturers. Based on stock availability, with a warranty provided
on all items.
no-r sk guarantee
Whatever rental option you choose, as a TechRentals customer you have the safety of our
No-Risk Guarantee, enabling you to return the equipment should you notify us that it’s
unsuitable for the specified task within the first 24 hours.
cal brat on & support
TR can also maintain and calibrate your own test equipment, at IANZ/NATA accredited
laboratories in both Australia and New Zealand. We’re also the Authorised Service Agent
for both Fluke and Tektronix in Australia.

ten reasons rental
makes good
business sense
1. stretch your budget
Test equipment is often used just some of the time. Rental allows you to pay for it only when
you use it, as well as stretching your budget by accessng more equipment than you could
if you purchased it outright.
2. conserve cap tal
Test equipment is expensive and often sits on a shelf collecting dust; not effective use of your
valuable business capital. With rental you can release your capital into other parts of the
business where it can be used to generate additional profits.
3. conduct product research before purchas ng
It is not always clear immediately which make and model will fulfil your requirements best.
Trialling it on casual rental gives you hands-on experience to guide purchase decisions.
4. recover costs more qu ckly
Generally rental payments are fully tax deductable and the expense can be recovered far
more quickly than the tax allowances for ongoing asset depreciation. †
5. el m nate runn ng costs
The expense of maintaining, calibrating and warehousing your test and measurement
equipment can be high. With rental you avoid these costs, as well as freeing up storage
space within your premises.
6. cost allocat on s s mpl fied
Rental payments are easy to track and account for in your business, making it easy to allocate
appropriate costs to departments, clients or specific projects.
7. respond to sudden demands
At peak periods, for unexpected projects, or when essential equipment equipment breaks
down, rental can put the necessary equipment in your hands ensuring seamless operations.
8. apply new technolog es & avo d obsolescence
Rental allows you to update your equipment in line with other businesses and take advantage
of new technologies. It also avoids the potential cost of of owning equipment that can
be quickly superceded.
9. preserve cred t
Renting avoids the potential cost of utilising credit facilities such as an overdraft or credit
cards, which are often used for equipment purchases.
10. techn cal support
When you rent from TR you’ll have the support of an
experienced team of product experts, who’ll help you get
the most from your equipment. And in the unlikely event
of equipment failure we will do our utmost to rectify the
issues as soon as possible.
econom cal.
flex ble.
access ble. †
Please ensure you obtain independent professional taxation advice

v
office locations
austral a
AdelAide
81-83 Stephens Avenue
Torrensville South Australia 5031
P +61 8 8302 8800
F +61 8 8302 8899
BrisBAne
Unit 1 46 Longland Street
Newstead Queensland 4006
P +61 7 3850 7700
F +61 7 3850 7799
dArwin
Unit 3 101 Coonawarra Road
Winnellie Northern Territory 0820
P +61 8 8947 2860
F +61 8 8947 2901
Gold CoAst
103-105 Spencer Road
Nerang Queensland 4211
P +61 7 5596 3451
F +61 7 5596 4119
MelBourne
6 Joseph Street
Blackburn North Victoria 3130
P +61 3 9896 3000
F +61 3 9896 3099
newCAstle
Unit 2 1 Hartley Drive
Thornton New South Wales 2322
P +61 2 4966 5910
F +61 2 4966 3586
Perth
122 Kewdale Road
Kewdale Western Australia 6105
P +61 8 9441 3900
F +61 8 9441 3999
sydney
Metro Centre Unit 13
38-46 South Street
Rydalmere New South Wales 2116
P +61 2 9933 1100
F +61 2 9933 1199
townsville
Unit 8 15-17 Castlemaine Street
Kirwin Queensland 4817
P +61 7 4773 7788
F +61 7 4723 5397
new zealand
AuCKlAnd
669 Great South Road
Penrose Auckland New Zealand
P +64 9 589 2030
F +64 9 589 2031
malays a
KuAlA luMPur
38 Jalan PJS 11/3 Bandar Sunway
46150 Petaling Jaya
Selangor Darul Ehsan Malaysia
P +60 3 5632 1135
F +60 3 5632 5409
austral a (cal brat on)
vMs AMBerley
RAAF Base Amberley, Building 364
Amberley Queensland 4306
P +61 7 5461 1458
vMs BrisBAne
Unit 1&4 30 Lensworth Street
Coopers Plains Queensland 4108
P +61 7 3344 1866
F +61 7 3344 1744
vMs sydney
Unit 34 244 Horsley Road
Milperra New South Wales 2214
P +61 2 9771 9300
F +61 2 9711 9600

calibration
TR Corporation services also include calibration and service support.
These services are delivered through TECHRENTALS and VMS.
Our laboratories are staffed by experienced technical engineers
and technical officers to provide internationally recognised calibration
services. Utilising state-of-the-art specialised instrumentation, each
is NATA or IANZ accredited, with ISO quality systems in place
for traceability and control.
And the convenience of our easy online facility lets you stay informed
about the status of your job, without leaving your desk.
our serv ces:
>
>
>
>
>
>
Calibration
Repairs
Authorised Australian Service
Agent for Fluke & Tektronix
Equipment sales
Mobile calibration facilities
Total asset management
supported ndustr es:
>
>
>
>
>
>
>
Aviation
Defence
Electrical
Electronic
Biomedical
Mechanical
Telecommunications
talk to your
consultant
about solv ng
your cal brat on
problems
v

v
quick find guide
Agriculture mAintenAnce & mAnAgement
chemical analysis 75
data logging 39
environmental testing 72
humidity measurement 66
light & UV measurement 69
liquid & gas flow measurement 63
microscopes 47
pressure measurement 44
temperature measurement 59
weather recording 69
Air conditioning & refrigerAtion
air conditioning system balancing 69
air flow measurement 66
air quality testing 66
data logging 39
dust detection 66
gas analysis & monitoring 72
gas leakage detectors 69
humidity measurement 44
liquid & gas flow measurement 63
noise analysis 70
pressure measurement 48
temperature measurement 59
temperature/humidity/barometric recording 60
vibration measurement 51
Automotive engineering & design
air flow measurement 66
air quality testing 66
data logging 39
dc power supplies 4
electrical insulation testing 22
endoscopes 46
force gauges 49
gas analysis & monitoring 72
high speed video recording 48
humidity measurement & recording 59
instrumentation amplifiers 41
light & UV measurement 69
liquid & gas flow measurements 63
microscopes 47
noise analysis 70
non-destructive testing (NDT) 51
pressure & vacuum measurement 48
tachometers & stroboscopes 45
temperature measurement & recording 59
thermal imaging camera 60
vibration measurement 51
Building & construction
ac power sources/inverters/generators 38
air flow measurement 66
air quality testing 66
cable & pipe location 19
cable integrity testing 19
concrete testing 53, 61
distance measurement 45
electrical insulation testing 22
endoscopes 46
gas analysis & monitoring 72
hardness testing 54
humidity & moisture measurement 61
light & UV measurement 69
liquid & gas flow measurement 63
load measurement 49
noise measurement 70
non-destructive testing (NDT) 51
pressure measurement 48
security equipment 61
temperature/humidity/barometricrecorders 59
thermal imaging cameras 60
vibration measurement 51
weather recording 69
Business & office equipment
ac generators & UPS 37
network test equipment 16
security equipment 61
chemicAl AnAlysis
air quality measurement 66
ground water logging 74
salinity testing 74
spectrophotometers 75
water quality testing 74
dAtA communicAtions
ac generators & UPS 37
dc power supplies 4
fibre optics cable testing & splicing 18
LAN analysis and management 16
LAN cable testing 17
WAN analysis & management 16
defence, police, fire & emergency
ac generators & UPS 37
ac power sources/inverters/generators 38
air flow measurement 66
air quality 66
cable, pipe testing & location 19
data logging 39
endoscopes 46
environmental - testing 72
gas analysis & monitoring 72
high speed video capture 48
light & UV measurement 69
microscopes 47
noise & vibraton analysis 70
non-destructive testing (NDT) 51
sound signal analysis 70
spectroscopy 75
temperature measurement 59
thermal imaging cameras 60
TV test equipment 15
weather recording 69
educAtion
security & surveillance equipment 61
electricAl – industriAl & domestic
ac generators & UPS 37
ac power analysis & recording 21
ac power sources/inverters/generators 38
cable, pipe testing & location 19
current injection 36
data logging 39
dc power supplies 4
digital storage oscilloscope 1
electrical calibrators 6
electrical transducers 34
field strength measurement 10
general electrical testing 36
high voltage testing 2, 33
instrumentation amplifiers 41
insulation testing 21
magnetic field measurement 21
multimeters & electrometers 3
power transformers 37
temperature measurement 59
thermal imaging cameras 60
voltage current recording 43
emergency services
ac generators & UPS 37
ac power sources/inverters/generators 38
air flow measurement 66
air quality 66
cable, pipe testing & location 19
data logging 39
endoscopes 46
environmental - testing 72
gas analysis & monitoring 72
high speed video capture 48
light & UV measurement 69
microscopes 47
noise & vibraton analysis 70
non-destructive testing (NDT) 51
RF & microwave testing equipment 7
sound signal analysis 70
spectroscopy 75
temperature measurement 59
thermal imaging cameras 60
TV test equipment 15
weather recording 69
environmentAl testing
air flow measurement 66
air quality measurement 66
data logging 39
electrochemistry 74
gas analysis & monitoring 72
humidity & moisture measurement 61
light & UV measurement 69
liquid & gas flow measurement 63

noise & sound 70
spectroscopy 75
temperature measurement 59
temperature/humidity/barometric recorders 59
thermal imaging cameras 60
vibration analysis 51
water quality testing 74
weather recording stations 69
event mAnAgement
metal detectors 61
security & surveillance 61
food mAnufActuring
air quality monitoring 66
endoscopes 46
high speed video capture 48
humidity measurement & logging 59
metal detectors 61
moisture meters 61
process control test equipment 55
scales & balances 50
temperature measurement & logging 59
water quality testing 74
gAs industry
cable, pipe testing & location 19
data logging 9
gas analysis & monitoring 72
high speed video capture 48
humidity & moisture measurement 61
liquid & gas flow measurement 63
non-destructive testing (NDT) 51
OH&S & environmental testing 71
pressure vacuum gauges & recorders 48
spectroscopy 75
thermal imaging cameras 60
voltage current recording 43
generAl electronics test equipment
data logging 39
dc power supplies 4
digital storage oscilloscopes 1
distortion analysers 13
electrical calibrators 6
EMC test equipment 11
field strength meters & antennas 10
frequency counters 7
frequency response analysers 6
function generators 5
instrumentation amplifiers 41
LCR meters 5
LF signal generators 13
logic/analysers/testers 6
memory recorders 41
multimeters & electrometers 3
probes & accessories 2
PROM programmers 6
pulse generators 5
strip chart recorders 43
tape recorders 43
TV test equipment 15
ultrasonic baths 58
voltage current recorders 43
heAlth & sAfety
air flow measurement 66
air quality measurement 66
data logging 39
electrical insulation testing 22
electrochemistry 74
gas analysis & monitoring 72
light & UV measurement 69
magnetic field measurement – Gauss, Tesla 21
noise & sound analysis 70
OH&S & environmental compliance testing 71
vibration analysis 51
water quality measurement 74
it depArtments
ac generators & UPS 37
air conditioning testing 66
air flow measurement 66
cable location 19
data comms test equipment – LAN/WAN 16
security & surveillance equipment 61
temperature measurement & recording 59
locAl government
ac generators & UPS 37
air flow measurement 66
air quality testing 5, 67
cable, pipe testing & location 19
concrete testing equipment 53
data logging 39
electrical insulation testing 22
electrical testers 36
electrochemistry 74
gas analysis 72
LAN analysis & monitoring 16
LAN/WAN analysers 16
light & UV measurement 69
magnetic field meters 21
noise & sound analysis 70
OH&S & environmental equipment 71
temperature measurement 59
thermal imaging cameras 60
vibration analysis 51
WAN analysers 16
water quality testing 74
mAnufActuring & process industry
ac generators & UPS 37
cable, pipe testing & location 19
data logging 39
distance mesurement 45
endoscopes 46
gloss mesurement 52
hardness testing 54
high speed video capture 48
humidity & moisture measurement 61
inclinometers 48
light & UV measurement 69
liquid & gas flow mesurement 63
materials testing 49, 74
memory recorders 41
microscopes 47
noise & sound analysis 70
OH&S & environmental 71
position transducers 48
pressure & humidity measurement 44
pressure vacuum measurement 48
PROM programmers 6
scales & balances 50
strip chart recorders 43
tachometers/stroboscopes 45
tape recorders 43
temperature measurement 59
temperature/humidity recorders 60
thermal imaging cameras 60
vibration analysis 51
mArine
dc & ac power testing 21
endoscopes 46
liquid & gas flow measurement 63
non-destructive testing (NDT) 51
see general electronics test equipment 58
mining & explorAtion
ac generators & UPS 37
air flow measurement 66
air quality measurement 66
cable,pipe testers & locators 19
data logging 39
dc power supplies 4
distance measurement & surveying 45
electrochemistry 74
endoscopes 46
force measurement 49
gas analysis 72
high speed video capture 48
humidity & moisture measurement 61
inclinometers 48
light & UV measurement 69
liquid & gas flow measurement 63
load measurement 49
Logic analysers & testers 6
memory recorders 41
microscopes 47
noise & sound analysis 70
non-destructive testing (NDT) 51
OH&S & environment compliance testing 71
power analysis & recording 21
pressure & humidity measurement 44
pressure vacuum gauges/recorders 48
protection relay testing 32
RF amplifiers 7
RF signal ge nerators 7
RF sweep generators 7
spectroscopy 75
strip chart recorders 43
telecommunications testing 11
temperature measurement 59
temperature/humidity/barometric
measurement 60
thermal imaging cameras 60
v

v
vibration & alignment analysis 51
weather monitoring & recording 69
non-destructive testing
acceleration measurement 51
cover meters 54
gloss measurement 52
hardness testing 54
liquid & gas flow measurement 63
shock testing 51
thickness measurement 53
vibration measurement 51
occupAtionAl heAlth & sAfety
air flow measurement 66
air quality measurement 66
data logging 39
electrical insultation testing 22
electrochemistry 74
gas analysis & monitoring 72
light & UV measurement 69
magnetic field measurement – Gauss, Tesla 21
noise & sound analysis 70
OH&S & environment compliance
testing 71
vibration analysis 51
water quality measurement 74
petrochemicAl
data logging 39
electrochemistry 74
force measurement 49
gas analysis & monitoring 72
high speed video capture 48
liquid & gas flow measurement 63
load measurement 49
memory recorders 41
microscopes 47
non-destructive testing (NDT) 51
pressure & humidity measurement 44
pressure vacuum gauges/recorders 48
strip chart recorders 43
tachometers/stroboscopes 45
temperature measurement 59
thermal imaging cameras 60
vibration & alignment analysis 51
water quality measurement 74
plumBing & gAsfitting
see ‘water, waste water & plumbing’ section
power generAtion & distriBution
cable, pipe testers & locators 19
combustion gas analysis & monitoring 72
current injectors 36
data logging 39
distance measurement & surveying 45
endoscopes 46
force measurement 49
hi pot testing 33
high speed video capture 48
humidity & moisture measurement 61
inclinometers 48
insulating testing 22
LCR meters 5
liquid & gas flow measurement 63
load measurement 49
magnetic field measurement – Gauss, Tesla 21
noise & sound analysis 70
non-destructive testing (NDT) 51
power analysis & recording 21
protection relay testing 32
strip chart recorders 43
tachometers/stroboscopes 45
temperature/humidity/barometric
measurement 60
thermal imaging cameras 60
vibration & alignment analysis 51
voltage current recorders 43
weather monitoring & recording 69
refrigerAtion
see ‘air conditioning & refrigeration’ section
retAil
security & surveillance equipment 61
rf & microwAve
communications test sets 11
EMC test equipment 11
field strength meters & antennas 10
filters 13
frequency counters 7
logic analysers & testers 6
RF amplifiers 7
RF signal generators 7
RF sweep generators 7
spectrum analysers - high frequency 8
telecommunications testing 11
TV test equipment 15
roAd, rAil & civil construction
ac power sources/inverters/generators 38
air flow measurement 66
air quality measurement 66
cable, pipe testing & location 19
concrete testing equipment 53
dc power supplies 4
distance measurement & surveying 45
electrochemistry 74
force measurement 49
gas analysis & monitoring 72
hardness testers 54
inclinometers 48
load measurement 49
magnetic field measurement – Gauss, Tesla 21
noise & sound analysis 70
non-destructive testing (NDT) 51
power analysis & recording 21
vibration & alignment analysis 51
water quality testing 74
weather monitoring & recording 69
security & crowd control
bug detectors 61
CCTV 61
metal detectors – person & walk thru 61
surveillance equipment 61
thermal sensing cameras 60
telecommunicAtions
distortion analysers 13
fibre optics testing & splicing 18
frequency counters 7
LAN/WAN analysis 16
logic analysers & testers 6
pulse generators 5
RF & microwave 7
RF amplifiers 7
RF signal generators 7
RF sweep generators 7
WAN analysers 16
trAining
security & surveillance 61
trAnsport
automotive general testing 52
data logging 39
dc power supplies 4
distance measurement 45
endoscopes 46
load measurement 49
noise & sound analysis 70
non-destructive testing (NDT) 51
scales & balances 50
thermal imaging cameras 60
vibration & alignment analysis 51
trAvel & leisure
metal detectors 61
security equipment 61
wAter, wAstewAter & plumBing
data logging 39
distance measurement & surveying 45
electrochemistry 74
endoscopes 46
gas analysis & monitoring 72
inclinometers 48
liquid & gas flow measurement 63
pipe locators 19
water quality testing 74
workplAce environment
air flow measurement 66
air quality measurement 66
data logging 39
electrical insulating testing 22
electrical test & tagging 22
electrochemistry 74
gas analysis & monitoring 72

DIGITAL STORAGE OSCILLOSCOPES
Model Channels Bandwidth
(MHz)
DIGItAL stoRAGe oscILLoscoPes
tektron x tDs2014 100mHz 4 channel colour Dso
TEK,TDS2014 AU
Sampling rate 1GS/s. Sensitivity 2mV~5V/div. Bandwidth
limited to 20MHz when set to

2
DIGItAL stoRAGe oscILLoscoPes contInUeD
PROBES &
ACCESSORIES
PRoBes & AccessoRIes
tektron x tDs3054B 500mHz 4 channel Dso
TEK,TDS3054B AU
Sampling rate 5GS/s. Memory length 10 k. Sensitivity 1 mV - 10
v/div. Time base 1ns~10s/div. Trigger functions include video.
Extensive automatic waveform measurements. Including FFT, TV
trigger, advanced analysis (TDS3AAM), & limit testing (TDS3LIM).
Colour LCD with digital phosphor function. VGA, GPIB (IEEE-488)
& RS232 interfaces included (TDS3GV). In-built FDD. Comes with
TDS3BATB for battery operation.
tektron x DPo4054 4 channel memory scope
TEK,DPO4054 AU
Wave Inspector® controls, delivers the performance you need
to visualize even your most demanding signals. 10 Megasample
record length on all channels.
tektron x tHs730A 200 mHz Battery Dso
TEK,THS730A AU
Dual channel battery portable digital storage oscilloscope with
digital multimeter facilities. Max sampling rate 1GS/s. Max input
640V rms, max float 600Vrms. Waveform processing including
watts calculations. Video trigger. RS232 interface.
tektron x Wavestar software for tDs Dso
TEK,WAVESTAR AU
Acquires, prints, & exports waveforms & screen images as
graphics images or data values. Exports to common packages, eg.
MS Word, Excel. Obtains data via RS232, GPIB & FDD.
Fluke 80K-40 H gh Voltage Probe
FLU,80K-40 AU
1~40kV dc or peak ac, 28kV ac rms. Input resistance 1GΩ,
division ratio 1,000:1. Note: input impedance of DVM must be
10MΩ or reading will be wrong.
nat onal Instruments GPIB-UsB Interface w th Plotter
software
NAT,GPIB-USB-HS AU
High speed GPIB to USB interface. Provides control of GPIB/HPIB/
IEEE488 devices from a USB equipped PC (requires Win 2000 or
later operating system). Includes software to allow PC to emulate
a GPIB plotter. Plotter software outputs plots as HPGL, HPGL/2,
JPEG, TIFF, BMP & WMF. Plotter software can emulate HP 7440,
HP 7470, HP 7475, HP 7550 & HP 7570 pen-plotters.
tektron x P5200 Isolated D fferent al Probe
TEK,P5200 NZ
High voltage differential probe to provide a safe means of
measuring circuits with floating potentials up to 1kV from earth
to ground & up to 1,300V differential. Range settings are 1/50
& 1/500. Bandwidth: dc to 25MHz accuracy is ±3%, input
impedance is 8MΩ, 3.5 pF between inputs. Rise time is 14ns.
Fluke 199c scopemeter 200mHz Hand-held
FLU,199C-SCOPEMETER AU
FLU,199 NZ
Colour digital oscilloscope, 200MHz bandwidth, 2 channel with
DMM feature. Colour display 14.4cm with persistence feature. Real
time sampling 2.5GS/s. Input sensitivity 5mV/div~100V/div. Glitch
capture 3ns using pulse width triggering. Timebase range in scope
mode 5ns/div~2min/div. Trigger types auto, free run, single shot,
edge, delay, video, video line, selectable pulse width & external.
Automatic capture & replay of last 100 screens. Measures electrical
power properties such as VA, VAR, etc. Inputs are isolated (1kV CAT
II/600V CAT III). PC software. Battery operation 4h.
HP/Ag lent mso6104A 1GHz D g tal osc lloscope
w th Log c
HP,6104A AU
Agilent 6104A 1 GHz 4 + 16 channel mixed signal oscilloscope
(MSO). 4Gsa/s. XGA Colour display updates 100,000 waveforms/
sec with 256 levels intensity. 4 analogue channels & 16 logic
channels. Deep memory. 8 digit frequency counter function.
Triggering includes video, HDTV, I2C, SPI, LIN, CAN, & USB. FFT
analysis included. LAN, USB, GPIB, & XGA interfaces standard.
Yokogawa DL1540L 150mHz 4 channel Dso
YEW,DL1540L AU/MY
In-built printer & FDD. Amplifier bandwidth 150MHz. Sampling rate
200MS/s. Sample memory of 2Mword for 2 channels & 1Mword
for 4 channels. BMP, TIF HPGL, postscript & comma separated
waveform formats. GO/NOGO testing of waveforms. External
sample rate input - useful for rotating machinery work. Waveform
computations including FFT. Averaging function to reduce the S/N
ratio, accumulate function. GPIB interface.
Model Type Bandwidth Attenuation Voltage Max Current Max (A)
FLU,80K-40
NAT,GPIB-USB-HS
Voltage high DC~100MHz 1:1,000 40kV dc, 28kV ac
TEK,P6015 Voltage high 75MHz 1:1,000 40kV
TEK,P6158 Passive probe 30GHz 1:20
TEK,P5200 Differential probe dc to 25MHz 1300V
USB,232CONVERTER
See Electrical Transducers
USB to RS232 Converter
tektron x P6158 Pass ve RF Probe dc 3GHz 20X
TEK,P6158 AU
Attenuation dc~3GHz 20X. Input resistance 1kΩ.
tektron x P6015 40kV H gh Voltage Probe
TEK,P6015 AU
Bandwidth 75MHz. Input rating: 40kV pulse, 20kVdc plus peak
ac. Derating with frequency applies. Input impedance 100MΩ.
Attenuation x 1000.
UsB to Rs232 converter
USB,232CONVERTER AU
Stackable expansion module that connects to a PC or server via
the USB port. Provides 1 high speed RS-232 serial port. System
Requirements; pentium class, USB type A, Win 98, ME, 2000, XP,
MAC 8.6 & later.

MULTIMETERS &
ELECTROMETERS
Model Type Application Scale (digit) Interface True RMS Max (V)
FLU,177 Multimeter General Digital Yes
FLU,189 Multimeter High End Digital Yes
MET,MX51EX Multimeter Intrinsically safe 4½ Yes 1,000
MET,MX53 Multimeter General 4½ 1,000
MET,MX54 Multimeter General 4½ Yes 1,000
MET,MX55 Multimeter General 4½ Yes
HP,3400A RMS voltmeter Audio/RF Analogue Analogue output Yes 300
LEM,UNIGOR355 Multimeter General 4¾ IR interface Yes 1,000
LEM,UNIGOR380 Multimeter General 6 IR interface Yes 1,000
HP,34401A Multimeter General 6½ RS232/HPIB 1,000
SIM,SS2X Charge measurement Electrostatic Analogue 200 kV/m
mULtImeteRs & eLectRometeRs
Fluke mult meter w th Backl ght
FLU,177 AU
General purpose multimeter. True RMS voltage & current
measurements, digital display with analog bargraph & backlight,
manual & automatic ranging, display Hold & Auto Hold, frequency
& capacitance measurements. Overvoltage category EN61010-1
CAT III 1000V/CAT IV 600V.
Fluke Logg ng mult meter
FLU,189 AU
Higher end multimeter. PC interface for data exchange, internal
memory allows stand-alone logging of up to 1000 measurements.
Extremely fast readings true RMS AC + DC measurements,
100kHz ac bandwidth for voltage & current, dual display with
bargraph & two-level backlight, min/max/average with real time
clock & 250µs Fast Min-Max, Temperature measurement -
200ºC~1350ºC,dBV/dBm with selectable reference. Overvoltage
category EN 61010-1 (IEC 1010-1) CAT III 1000V/CAT IV 600V.
metr x mX51eX Intr ns cally safe D g tal mult meter
MET,MX51EX AU
Resolution 5,000 count with 0.1% basic accuracy. Measures
AC/DC voltage & current, & resistance. Voltage sensitivity 100µV.
Max voltage 1kV dc, 750Vac. Max current 10A. Intrinsic safety
limits of 60V & 500mA.
metr x mX53 Hand Held D g tal mult meter
MET,MX53 AU
Display 50,000 count with 34 segment bar graph. Vdc
range 500mV~1kV. Vac range 500mV~750V. Current range
500µA~10A. Resistance range 500Ω~50MΩ. Capacitance
range 50nF, 50mF. Frequency range 0.6Hz~500kHz. Min & max
value mode. Continuity & diode checking functions.
metr x mX54 D g tal mult meter
MET,MX54 AU
Measures AC/DC voltage & current, resistance, frequency, &
capacitance. 4½ digit display giving a sensitivity of 10µV &
10nA. Ranges: voltage 500mV~1,000V (750V ac), current
500µA~10A, resistance 500Ω~50MΩ with a max resolution
of 10mΩ, frequency; 0.6Hz ~500kHz;dB measurement over
impedance range 1~9,999Ω.
metr x mX55 tRms mult meter
MET,MX55 MY
True rms digital multimeter measuring AC/DC voltage & current,
resistance, frequency.
4.5 digit display.
HP 3400A Ac true Rms 10mHz Analogue Voltmeter
HP,3400A AU
Analogue display 10Hz~10MHz, 1mV~300V FS. Recorder
output.
Lem Un gor 355 Hand-held D g tal mult meter/s gnal
Generator
LEM,UNIGOR355 AU
Measures dc, ac trms voltage & current, resistance, frequency,
capacitance, temperature & time. Display 4¾ digit. Resolution
10µV, 10nA, 10mΩ, 1pF & 0.01Hz. Ranges voltage
300mV~1kV, current 300µA~10A, resistance 300Ω~30MΩ,
frequency 300Hz~100kHz, -48~63dB, temperature ºC/ºF, Pt
100 -200~100ºC, Pt 1000 100~850ºC. Features automatic
socket shutters, IR interface, split second chronograph, automatic
measurement value storage, etc.
Lem Un gor 380 D g tal mult meter
LEM,UNIGOR380 AU
Precision 6 digit multimeter. Measures dc, ac trms voltage &
current, resistance, frequency, capacitance, temperature & time.
Resolution 1µV, 1nA, 1mΩ, 1pF & 0.001Hz. Ranges voltage
300mV~1kV, current 300µA~10A, resistance 300Ω~30MΩ,
frequency 300Hz~300kHz,dB -48~63, temperature ºC/ºF K
-200~1,372ºC, J -210~1200ºC. Features automatic socket
shutters, IR interface, split second chronograph, automatic
measurement value storage, etc.
HP 34401A D g tal mult meter
HP,34401A AU
Precision 6½ digit multimeter. 100nV sensitivity on dc 120mV
range. Max dc input 1kV. Measures ac voltage, dc & ac current to
3A, 2 or 4 wire resistance to 120MΩ, period & frequency. Max
reading rate 1,000/s. Maths functions including limits test. 512
point storage. RS232 & HPIB interfaces.
s mco ss2X electrostat c charge meter (Analogue)
SIM,SS2X AU
Designed for detecting & measuring the voltage & field strength
associated with static charges on objects & materials. Capable
of measuring voltages from 0 ~200 KV & field strength from
0~4000MV/M
3

4
DC POWER SUPPLIES
Model Current Max (A) Voltage (Vdc) Dual Variable
HP,E3640A 3, 1.5 8, 20 Yes No
BWD,246A 5 36 Yes Yes
INV,MPS48DC2400W 50 48 Yes
SOR,DCR10-120B 120 10 Yes
SOR,DCS60-50 50 60 Yes
TTI,CPX-200LPS 10 35 Yes
TRI,PD35-20 20 35 Yes
TRI,PD35-10D 10 35 Yes
XAN,XFR600-4 4 600 Yes
XAN,XKW60-50 50 60 Yes
Dc PoWeR sUPPLIes
Ag lent e3640A Programmable Dc Power supply
HP,E3640A AU
30W single-output programmable power supply with built-in GPIB
& RS232 connectivity & SCPI language compatibility. 0~8V/3A
or 0~20V/1.5A. Over-voltage protection & remote sensing. Low
noise & excellent regulation. Front & rear output terminals.
BWD 246A Dual Power supply
BWD,246A AU
Dual output 0~36V, 0~5A per section. Use in series, parallel or
tracking modes.
Invensys Intergy m n Power system 48V dc
2.4kW supply
INV,MPS48DC2400W AU
Sub-rack Mini System 19” rack mount range. Ideal solution
for low power telecommunications applications (Premises Data
Networks & IP Routers, Local Loop Transmission Systems &
Wireless) requiring compact, efficient & flexible dc power supplies.
Includes an integral dc distribution panel & an SM30 Series
Intergy Supervisory Module. All system settings are fully adjustable
in software. Input: R1148: 220/240Vac, 50/60Hz (nominal).
Power factor: >0.98@30~100% max system current. Efficiency:
>89%. Output; voltage 48V, 45~60Vdc, current@48Vdc 50A
(2400W). Dimensions: 133H x 275W mm overall. Weight: 12kg
typical configuration.
sorensen DcR10-120B dc Power supply
SOR,DCR10-120B MY
0~10V, 0~120A.
sorensen Dcs60-50, 60V 50A dc Power supply
SOR,DCS60-50 AU
0~60V, 0~50A. Max power on a 240V 3ph supply 3kW, 2.5kW
on a 1ph 240V supply. On 1ph 50V@50A or 60V@42A.
Remote programming.
ttI cPX200 tw n 175W Dc Power
supply 0~35V/0~10A
TTI,CPX-200LPS AU
High performance auto ranging output, dual isolated outputs, 175
watts maximum. PowerFlex design gives variable voltage & current
combinations within the range 0~35V, 0~10A. Guaranteed 5A
capability at 35V maximum current of 10A below 12V variable
OVP trips, precision control & metering.
tr o PD35-20 Dc Power supply
TRI,PD35-20 AU
Output 0~35V, 0~20A. Constant current, constant voltage.
Multiple parallel or series operation. Remote programming of
voltage or current by external voltage or resistance.
tr o Kenwood PD35-10D 35V 10A Power supply
TRI,PD35-10D AU
Output 0~35V, 0~10A. Constant current, constant voltage.
Multiple parallel or series operation. Remote programming of
voltage or current by external voltage or resistance.
Xantrex XFR 600-4 Power supply
XAN,XFR600-4 AU
2.8kW programmable DC power supply 0~600V, 0~4A. RS-232
and isolated analogue control options.
Xantrek XKW60-50 60V 50A dc Power supply
XAN,XKW60-50 AU
3 KW DC power supply, 0-60 V, 0-50 A. Constant current &
constant voltage. Isolated Analogue programming. Operation of
multiple units in series or parallel is possible.

FUNCTION
GENERATORS
Model Frequency Max (MHz) Frequency Min (µHz) Voltage Max Arbitary
TEK,AFG3022 25 MHz 1 10Vp-p Yes
TEK,AFG3102 100 MHz 1 10Vp-p Yes
HP,33120A 15 MHz 100 10Vp-p Yes
HP,33220A 20MHz 1 10Vp-p Yes
HP,33250A 80 MHz 1 10Vp-p Yes
FUnctIon GeneRAtoRs
tektron x 3022/25mHz Arb trary Funct on Generator
TEK,AFG3022 AU/NZ
Dual channel function/arbitrary waveform generator. Frequency
range 1mHz ~25MHz sine, 12.5MHz square & pulse waveforms,
250 kHz triangle, ramp, noise & DC waveforms. Arbitrary
waveform generation 12.5MHz. Gaussian noise to 25MHz. Output
into 50Ω 10mV~10V P-P. AM, FM, FSK, & burst modulation.
HPIB, USB, & LAN interfaces used with included software allows
waveforms to be created on PC & imported into unit. Full screen
display also allows display & editing of waveforms on unit itself.
tektron x 3102/100mHz Arb trary Funct on Generator
TEK,AFG3102 AU
Dual channel function/arbitrary waveform generator. Frequency
range 1mHz~100MHz sine, 12.5MHz square & pulse waveforms,
& 250kHz triangle, ramp, noise, & DC waveforms. 12.5MHz
Arbitrary waveform generation. Gaussian noise to 25MHz. Output
into 50Ω 10mV~10V P-P. AM, FM, FSK, & burst modulation.
HPIB, USB, & LAN interfaces used with included software allows
waveforms to be created on PC & imported into unit. Full screen
display also allows display & editing of waveforms on unit itself.
HP 33120A Funct on/Arb trary Generator
HP,33120A AU/MY
Frequency range 15MHz sine & square waveforms, & 100kHz
triangle & ramp waveforms. Gaussian noise to 10MHz. Output into
50, 50mV~10V pp. AM, FM, FSK, & burst modulation. Optional
Benchlink software allows waveforms to be captured & played
back. HPIB & RS232C interfaces. Some assets include option
001 phase lock & high stability TCXO timebase - input & output
10MHz with phase offset.
Ag lent 33220A 20mHz Funct on/Arb trary Generator
HP,33220A AU
Function/arbitrary waveform generator. Frequency range 20MHz
sine & square waveforms, 200kHz pulse, triangle, ramp, noise,
& DC waveforms. Gaussian noise to 10MHz. Output into 50Ω
10mV~10V P-P. AM, FM, FSK, & burst modulation. Includes
option 001 external timebase reference. With optional Benchlink
software waveforms can be captured & played back. HPIB, USB,
& LAN interfaces.
HP/Ag lent 33250A 80mHz Funct on/Arb trary
Waveform Generator
HP,33250A AU
Frequency range 80MHz sine & square waveforms. 50MHz
pulse waveforms with variable rise/fall times. 25MHz arbitrary
waveforms, 1MHz triangle & ramp waveforms. White noise to
50MHz. Output into 50Ω 10mVpp~10Vpp. AM, FM, FSK, &
burst modulation. Intuilink software for programming arbitrary
waveforms. HPIB & RS232C interfaces.
PULse GeneRAtoRs
HP 8012B Pulse Generator
HP,8012B AU
Pulse generator 1Hz~50MHz. Variable transition times down to 5ns. Amplitude +10V with
selectable source impedance. Pulse width 10ns~1s. External trigger & gate.
LcR meteRs
stanford Research sR1720 LcR Br dge
SR,SR1720 AU
Automatic LCR bridge with 0.05% accuracy. Ranges: inductance
0.0001µH~99,999H; capacitance 0.0001pF~99,999µF;
resistance 0.0001Ω~2,000MΩ. Also measures Q & D. Test
frequencies 100/120Hz, 1/10/100kHz. Indicates value, deviation,
% deviation, or bin number. DC bias internal 0~2V, external
0~40V. Complete with optional Kelvin leads.
tegam 3550 45Hz-5mHz Programmable LcR meter
TEG,3550 AU
Programmable Impedance/LCR Meter. User selectable test
frequency from 42.0Hz~5.00MHz. 18mS measurement speed.
0.10% basic accuracy. Fully programmable with18 measurable
parameters & absolute or percentage comparator. Binning function
supports 10 output bins. Output to 3 highly visible LED displays.
Standard RS232C & I/O interfaces
5

6
ELECTRICAL
CALIBRATORS
Model Type Description Accuracy %
DAN,DR60 Resistance Box Decade resistance box
GR,1432T Resistance Box Decade resistance box
GR,1433-20 Resistance Box Decade resistance box
GR,1433B-NATA Resistance box 1~11.1MΩ Decade resistance box. 6 decades x 1Ω 0.01
GR,1433F-NATA Resistance box 0.01Ω~11kΩ Decade resistance box. 7 decades x 0.01Ω 0.01
YEW,2553 DC voltage & current standard 0.02
YEW,2554 Portable DC voltage & current standard 0.05
eLectRIcAL cALIBRAtoRs
PRom PRoGRAmmeRs
Danbr dge DR60 Decade Res stor Res stance
DAN,DR60 MY
Decade Resistor. Maximum 10kΩ. Smallest resolution 0.01Ω.
Genrad 1432t Decade res stance box
GR,1432T AU
Ten steps of the following: 0.01Ω, 0.1Ω, 1Ω, 10Ω, 100Ω.
Maximum resistance 1KΩ.
Genrad 1433-20 Decade Res stor
GR,1433-20 MY
Resistance range from 1mΩ~111MΩ. High accuracy 0.01%
up to 10MΩ steps. Low temperature coefficient, 5 ppm/°C.
Good frequency characteristics, excellent stability (10ppm/yr,
25ppm/3yrs), low zero resistance (

FREQUENCY
COUNTERS
FReQUencY coUnteRs
Ph l ps Pm6666 1.1GHz Un versal counter
PHI,PM6666 AU
Frequency, period, time interval, totalise, & ratio measurements.
GPIB interface. High stability MTCXO timebase option fitted.
HP 53181A 3GHz Frequency counter
HP,53181A AU/MY
Option 010 high stability timebase included. HPIB interface. PC based Benchlink meter
software available.
HP 5350A 20GHz Frequency counter
HP,5350A MY
Automatic Microwave Counter. Input 1: 500MHz~20.0GHz 50Ω input impedance. Input 2
10Hz~525MHz at 50Ω. 10Hz~80MHz at 1 MΩ. HPIB interface standard. Option 006 input
damage protection included.
RF SIGNAL
GENERATORS
Model Type Frequency (GHz)
PHI,PM6666 Universal frequency counter dc~1
HP,53181A Universal frequency counter dc~3
HP,5350A Universal frequency counter
HP,5352B Automatic microwave counter 10Hz~20GHz
HP,5385A Universal frequency counter, DC operation dc~1GHz
RF sIGnAL GeneRAtoRs
Ag lent 83623B synthes zed swept
s gnal/cW Generator.
HP,83623B AU
Frequency range 0.01~20GHz. 1 Hz frequency resolution (Opt
008), -110dB~+17dBm o/p power, (Opt 001, minimum settable
output power is -110dBm. Maximum leveled output power is
reduced by 1.5dB~20GHz). For applications requiring the high
performance and accuracy of a synthesized source and the speed
and versatility of a sweep oscillator. Ideal for the demanding
requirements of signal simulation, local oscillator, and stimulus/
response component or subsystem test applications.
HP e4432B esG-D3000A 3GHz RF D g tal s gnal Generator
HP,ESG-D3000A MY
RF signal generator with digital modulation facilities. Frequency range 250kHz~3GHz, resolution
0.01Hz. AM, FM, phase, & pulse modulation. Wideband AM modulation. DC to 10MHz. Internal
modulation and pulse generator to 50kHz. Step sweep of frequency and power. Included option
UN3 provides DECT, GSM, NADC, PDC, PHS, & TETRA standards. External analogue I & Q
modulation inputs. Option 1E5 high stability reference 0.1ppm/yr included.
HP e4433B esG-D4000A 4GHz RF D g tal s gnal Generator
HP,ESG-D4000A AU
Signal generator with digital modulation facilities. Frequency range 250kHz~4GHz, resolution
0.01Hz. AM, FM, phase, & pulse modulation. Wideband AM modulation. DC to 10MHz. Internal
modulation and pulse generator to 50kHz. Step sweep of frequency and power. Option 1E5
high stability reference 0.1ppm/yr included.
HP 8648B 2GHz s gnal Generator (Analogue)
HP,8648B AU/MY
Frequency range 9kHz~2GMHz. Output range 13dBm~-136dBm, 1dB accuracy over entire
frequency range, resolution 0.001Hz. Full remote control via GPIB (IEEE488) interface.
HP 8648c-1e5 3GHz s gnal Generator
HP,8648C MY
Signal generator 9kHz~3.2GHz with AM/FM/Phase modulation output range from
+10~-136dBm with ±1 accuracy up to 2.5GHz. 0.001Hz resolution. Complete
with option 1E5 high stability timebase (

8
HIGH FREQUENCY SPECTRUM ANALYSERS
Model Type Frequency Resolution (Hz)
HP,8562A Spectrum analyser 9kHz~22GHz 100Hz – 2MHz
HP,8563E Spectrum analyser, high resolution 9kHz~26.5GHz 1kHz
HP,8593E Spectrum analyser 9kHz~22GHz 30
HP,8594E Spectrum analyser 9kHz~2.9GHz 1kHz
HP,8594E-G Spectrum analyser with tracking generator 9kHz~2.9GHz 1kHz
AGI,N9340A-TG Spectrum analyser with tracking generator 100kHz~3GHz 1MHz
HP,E4407B Spectrum analyser 9kHz~26.5GHz 30
AIR,AIRMAG SPEC AN Spectrum analyser 2.5~2.5GHz; 4.9~5.9GHz
ANR,MS2711A Portable spectrum analyser 9kHz~3GHz 10kHz
ANR,MS2711D Spectrum analyser, colour, portable 9kHz~3GHz 100
ANR,MS2711D-6-29 Spectrum analyser with power meter 9kHz~6GHz 100
RS,FSH3-TG Spectrum analyser with tracking generator
and return loss bridge
RS,FSH3-TG-V Spectrum analyser with tracking generator
and vector measurements
HIGH FReQUencY sPectRUm AnALYseRs
HP 8562A 22GHz spectrum Analyser
HP,8562A MY
RF Spectrum Analyser, 9kHz~22GHz. resolution 100Hz to 2MHz.
HPIB plotter interface.
HP 8563e spectrum Analyser
HP,8563E MY
Range 9kHz~26.5GHz. Resolution 1Hz~2MHz. Sensitivity up to
-139dBm. HPIB plotter and printer interface.
HP 8591e 1.8GHz spectrum Analyser
HP,8591E AU
Range 9kHz~1.8GHz. Resolution 1kHz~3MHz. Card reader
allows data storage and also downloading of a range of
measurement options (not included). Most assets include option
010 tracking generator and option 021 HPIB interface. One
analyser includes; option 130 gives 30~300Hz resolution, option
041 HPIB interface and quasi peak detector and option 103
AM/FM demodulation.
Ag lent n9340A-tG 3GHz spectrum
Analyser /track ng Generator
AGI,N9340A-TG AU
Portable handheld spectrum analyser with a frequency range
from 100kHz~3GHz. Resolution bandwidth 30Hz~1MHz. Colour
display. Includes tracking generator. Displayed average noise level
-126dBm (Typical). Sweep time 10ms. USB connectivity allows
for PC control and data transfer. 4hr battery life & colour display.
HP 8593e 22GHz spectrum Analyser
HP,8593E AU/MY
Frequency range 9kHz~22GHz. Max resolution 30Hz. Noise level
-102~-127dBm according to frequency. Centre frequency display
with a resolution of up to 10Hz. Some assets include GPIB/parallel
and narrow resolution black/white options (041 & 130).
HP 8594e spectrum Analyser
HP,8594E MY
Range 9kHz~2.9GHz. Average Noise Level 400kHz~5MHz equal
to or less than 122dBm & 5MHz~2.9GHz equal to or less than
127dBm for 30Hz RBW.
HP 8594e-G spectrum Analyser w th track ng
Generator
HP,8594E-G MY
Range 9kHz~2.9GHz. Average Noise Level 400kHz~5MHz equal
to or less than 122dBm & 5MHz~2.9GHz equal to or less than
127dBm for 30Hz RBW. With tracking generator option installed.
100kHz~3GHz 1kHz
100kHz~3GHz 1kHz
RS,FSH6-TG Portable spectrum analyser 100kHz~6GHz 1kHz
ADV,U3771 Portable spectrum analyser 9kHz~31.8GHz 100
ADV,R3365A Spectrum analyser 100kHz-8GHz 10Hz
ANR,FCN4760 Frequency converter
HP/Ag lent e4407B 26.5GHz spectrum Analyser
HP,E4407B AU
Frequency range 9kHz~26.5GHz. Resolution bandwidth down to 30Hz. Noise level
-105~-136dBm according to frequency. Centre frequency display with a resolution of up
to 10Hz. Stores up to 200 traces in internal memory and 200 traces on disk. Some assets
include GPIB/parallel interface with benchlink software (option A4H) and narrow resolution
black/white (option 1DR).
A rmagnet spectrum Analyser
AIR,AIRMAG SPEC AN AU
Laptop base spectrum analyser. Specifically identify sources of interference in all Wi-Fi bands
2.4~2.5GHz and 4.9~5.9GHz, and track them to their physical source. Automatic and real
time identification of Bluetooth, cordless phones, microwaves, analog video cameras, RF
jammers and more. Immediately “see” and name each device.
Anr tsu ms2711A Portable spectrum Analyser
ANR,MS2711A MY
Portable spectrum analyser, 9kHz~3GHz. Light weight battery
powered spectrum analyser with LCD. Resolution bandwidth down
to 10kHz. Suitable for cellular telephone walk or drive tests to
determine coverage and base station positioning. Can also be
used for VHF/UHF signal surveying. N type connector.
Anr tsu ms2711D colour Portable spectrum Analyser
ANR,MS2711D AU
Colour portable spectrum analyser, 9kHz~3GHz. Light weight battery powered spectrum
analyser with colour LCD. Resolution bandwidth from 100Hz~1MHz. Has feature which can
identify the type of interfering signal. Can be used in applications such as cellular telephone
walk or drive tests to determine coverage and base station positioning and also VHF/UHF signal
surveying. N type connector.
Anr tsu ms2711D 6GHz spectrum Analyser w th Power meter
ANR,MS2711D-6-29 AU
Portable spectrum analyser, 9kHz~6GHz with power meter. Light weight battery powered
spectrum analyser with LCD. Resolution bandwidth from 100Hz~1MHz. Has feature which can
identify the type of interfering signal. Can be used in applications such as cellular telephone
walk or drive tests to determine coverage and base station positioning and also VHF/UHF signal
surveying. Has N type connector.
Rohde & schwarz FsH3 spectrum Analyser/track ng
Generator
RS,FSH3-TG AU/NZ
Handheld portable battery operated spectrum analyzer
100kHz~3GHz. Resolution bandwidth 1kHz~1MHz. Noise level
to 3GHz -112dBm typical, 5-6GHz -102dBm typical. Colour
liquid crystal display. Suitable for RF surveying applications.
Includes tracking generator, VSWR bridge and distance to fault
(DTF) options making it suitable for antenna and cable testing.
Four hours of continuous operation on battery power. Cable for
data transfer to PC.

HIGH FReQUencY sPectRUm AnALYseRs contInUeD
NETWORK ANALYSERS/
ANTENNA & CABLE TEST
Rohde & schwarz FsH3 spectrum Analyser/track ng
Generator/Vector measurements
RS,FSH3-TG-V AU
Handheld portable battery operated spectrum analyser
100kHz~3GHz. Resolution bandwidth 1kHz~1MHz. Less than
-105dBm noise level (-114dBm typical). Colour liquid crystal
display. Suitable for RF surveying applications. Includes Vector
Transmission and Reflection Measurements option, tracking
generator, VSWR bridge and distance to fault (DTF) options
making it suitable for antenna and cable testing. 4h of continuous
operation on battery power. Comes with cable for data transfer
to PC.
Rohde & schwarz FsH6 spectrum Analyser/track ng
Generator
RS,FSH6-TG AU/NZ
Specification as above but capacity is 6GHz.
netWoRK AnALYseRs/AntennA & cABLe test
Anr tsu s331D colour s temaster Antenna
ANR,S331D AU/MY
Antenna and cable test set. Battery operated with colour
display. Frequency range 25~4000MHz. Measures return loss,
SWR, cable loss, and distance to fault. Integral synthesized
signal generator. Return loss range 0~60dB. SWR range
1~65. Distance to fault range 1,197m. Insertion loss range
-120~+100dB. Cable loss range (one port) 0~30dB. Type
n(f) port. RS232 interface for printer or PC. Analysis software
discs included containing distance to fault and Smith chart tools.
Complete with Instacal calibration standard, AC/DC adaptor and
12Vdc car cigarette lighter adaptor.
Anr tsu s332D colour s temaster ncl 3GHz spectrum Analyser
ANR,S332D AU/NZ
Antenna and cable test set with spectrum analyser. Battery operated with colour display.
Standard signal table allows automated setup. Frequency range 25MHz~4GHz for cable and
antenna test. 9kHz~3GHz for spectrum analysis. Measures return loss, SWR, cable loss,
and distance to fault. Integral synthesized signal generator. Return loss range 0~60dB. SWR
range 1~65. Distance to fault range 1,197m. Cable loss range 0~30dB. Spectrum analyser
resolution bandwidth 100Hz~1MHz. Interfering signal feature allows identification of type of
interference. Type N(f) port. RS232 interface for printer or PC. Analysis software discs included
containing distance to fault and Smith chart tools. Complete with calibration components,
AC/DCadaptor and 12Vdc car cigarette lighter adaptor.
Anr tsu s820A m crowave s temaster 3~20GHz
ANR,S820A AU
Microwave antenna and cable test set. Portable (1.14kg) single post analyser, providing
return loss (SWR) insertion loss and distance to fault measurements in the frequency range of
3.3GHz~20GHz. RS232 interface. Smith chart and software management tools, AC/DC and
automotive adaptor. A comprehensive range of precision waveguide components and adaptors
are available.
Anr tsu s temaster Wavegu de components
ANR,WAVEGUIDE-ADAP AU
Calibration components and wave guide to co-ax adaptors for Anritsu S820A Sitemaster
antenna. Set includes 1/8 and 3/8 shorts, termination, and waveguide to co-ax adaptor.
Advantest 31.8GHz Portable spectrum Analyser
ADV,U3771 AU
Portable 9k to 31.8GHz spectrum analyser. 3 way power Battery,
240V & DC. RBW 100Hz-3MHz, sensitivity -117dBm@34GHz
(typ). Includes a wide variety of data analysis functions & zoom
function. With signals applied to both Input 1 and Input 2, two
signals such as an IF signal and a carrier can be measured. 5 min
warm-up, Support for USB for printer and memory Storage Image
formats: PNG, BMP, configuration file BIN, XML. Colour LCD.
OPT.20-High-stability frequency reference crystal.
Advantest R3365A 8GHz spectrum Analyser w th track ng Generator
ADV,R3365A AU
Frequency range 100kHz~8GHz. Sensitivity -145dBm. Resolution 10Hz. Adjacent channel
leakage power measurement and digital radio measurement functions. Gated sweep function
for TDMA and video signal analysis. In-built tracking generator 100kHz~3.6GHz. GPIB &
RS232 interfaces for plotter functions. Memory card reader.
Anr tsu Frequency converter module Fcn4760
ANR,FCN4760 AU/MY
Block down converter for the 4.7GHz~6.0GHz frequency range designed to work with
an ANR,MS2711D (with Option 6). Adds frequency range 4.7GHz ~6.0GHz to the
ANR,MS2711D.
Model Type Frequency Return Loss SWR RS232 dc Supply
ANR,S331D Antenna & cable test set 25MHz~4GHz Yes Yes Yes Yes
ANR,S332D Antenna & cable test set plus spectrum analyser 25MHz~4GHz Yes Yes Yes Yes
ANR,S820A Antenna & cable test set 3GHz~20GHz Yes Yes Yes Yes
ANR,S820D Microwave antenna and cable test set 25Mhz~20GHz Yes Yes Yes Yes
HP,8753D Vector network analyser S parameter test set 30kHz~6GHz
HP,8753ES Vector network analyser S parameter test set 30kHz~3GHz Yes Yes
HP,8757C Scalar network analyser 60GHz
HP,8757D Scalar network analyser 10Mhz Yes Yes
Anr tsu s820D m crowave s temaster 25mHz~20GHz
ANR,S820D AU
Microwave antenna and cable test set. Portable single post analyser, providing return
loss (SWR) insertion loss and distance to fault measurements in the frequency range of
25MHz~20GHz. Unit comes standard with RS232 interface, Smith chart and software
management tools, AC/DC and automotive adaptor. A comprehensive range of precision
waveguide components and adaptors are available.
HP 8753D 6GHz Vector network Analyser
HP,8753D AU
Vector network analyser with integral S-parameter test set. Frequency range 30kHz~6GHz with
included option 006. In-built 1Hz resolution synthesized signal source. Calibration kit included.
HP 8753es 3GHz Vector network Analyser
HP,8753ES AU/MY
3GHz Vector Network Analyser allows complete characterization of RF components. Includes
an integrated synthesized source, test set and tuned receiver. The built-in S-parameter test set
provides a full range of magnitude and phase measurements in both the forward and reverse
directions.
HP 8757c scalar network Analyser
HP,8757C AU
Scalar network analyser 10 MHz~40 GHz. 76dB (+16 to -60dBm) dynamic range. Three
detector inputs. Two display channels. Color display. Complete with 3 x HP,11664A detectors.
HP 8757D scalar network Analyser
HP,8757D AU
Measures insertion loss, gain, return loss, SWR, and power from 10MHz~110GHz.
HP 11679A Detector extens on cable
HP,11679A MY
Extension cable for use with HP,11664A detectors and HP,8757 network analysers. Length
7m. Extends the power and detected signal cable length.
HP 85032B cal brat on K t
HP,85032B AU
Calibration kit contains precision 50Ω type-N standards used to calibrate network analysers
for measurement of devices with 50Ωtype-N connectors. Standards include fixed terminations,
open circuits, and short circuits in both sexes.
9

10
FIELD STRENGTH METERS & ANTENNAS
Model Type Frequency
ANR,WIFI-ANTENNA WIFI antenna 2.4GHZ~5.8GHz
ANR,ANTENNA Dipole antenna 25MHz~1.7 GHz
ADV,TR1720 Loop vertical antenna system 100kHz~30 MHz
AH,SAS-200/550 Monopole rod antenna 100kHz~60 MHz
AH,SAS-200/571 Double ridge guide horn antenna 700MHz~18 GHz
AH,SAS-200/574 Double ridge guide horn antenna 18GHz~40 GHz
RS,HL013 Log periodic antenna 80MHz~1300 MHz
HOL,HI-3002 Isotropic RF radiation monitor 500kHz~6 GHz
HOL,HI-3004 Isotropic RF low level field strength meter 0.5MHz~6 GHz
NAR,8616 Radio frequency radiator monitor 300MHz~26 GHz
NAR,8217 Field strength meter for microwave ovens 2.4GHz
SE,MONITOR 4 Alpha, Beta, Gamma and X-Ray radiation monitor
PRO,3201 RF signal analyser & meter 100kHz~2.06GHz
PRO,3290 RF signal analyser & meter 100kHz~2.9GHz
AH,ANTENNA Log periodic antenna 300MHz~12GHz
Also see TV Test Equipment
FIeLD stRenGtH meteRs & AntennAs
Advantest tR1720 100kHz ~30mHz Antenna
ADV,TR1720 AU
Loop and vertical antenna system. Frequency range 100kHz~30MHz. Suitable for use with
ADV,R4131D for field strength and EMI measurements. Antenna tuner included which can be
used as an input/output filter to reject noise below the measuring frequency.
AH systems sAs-200/550-2B 100Hz~60mhz Rod Antenna
AH,SAS-200/550 AU
Monopole rod antenna. Frequency range 100Hz~60MHz. Active unit with battery power. Rod
height 220mm~1.09m. Ground plane 450 x 450mm. Antenna factor 0~24.
AH systems sAs-200/571 Antenna
AH,SAS-200/571 AU
AH,SAS-571 MY
Double ridge guide horn antenna. Frequency range 700MHz~18GHz. Continuous power
300W. Impedance 50Ω 200V/m max radiated field. Type N(f) connector.
AH systems sAs-200/574 18~40GHz Antenna
AH,SAS-200/574 AU
Double ridge guide horn antenna 18~40GHz. Gain in excess of 15dB. Type K(f) connector
compatible with 3.5mm connectors including SMA. Complete with tripod.
AH systems 300mHz ~12GHz Antenna system
AH,ANTENNA AU
Log periodic antenna system. Comprises two antennas: A: 300MHz~1.8GHz, power handling
1kW, antenna factor 15~32dB, B: 1~12GHz, power handling 10W, antenna factor 25~44dB.
Complete with tripod.
Anr tsu D pole Antenna K t
ANR,ANTENNA AU
Comprises types MP534A and MP651A antenna covering 25~520 & 470~1,700MHz.
Complete with tripod type MB9A and coaxial cable.
Anr tsu 2.4/5.8GHz WIFI 802.11A/B/G Antenna
ANR,WIFI-ANTENNA AU
High precision antenna set for wireless network test applications (802.11A/B/G, 11Mbps &54
Mbps). Includes 2.4GHz and 5.8GHz antennas with reverse SMA connectors. Also includes
precision reverse SMA to N type adapter to fit standard test equipment.
Rohde & schwarz HL013 80mHz~1.3GHz Log-Per od c Antenna
RS,HL013 AU
Complete with tripod.
Holaday HI-3002 F eld strength meter
HOL,HI-3002 AU
Isotropic RF radiation monitor. E-field & H-field probes spanning
500kHz~6GHz (E-field) & 5~300MHz (H-field). Operates from
batteries.
Holaday HI-3004 F eld strength meter
HOL,HI-3004 AU
Isotropic broadband field strength meter designed primarily
to measure low level fields for EMI/EMC studies. Meter scale
calibrated in v/m, with pointer deflection proportional to
v2/m2. Supplied with HSE high sensitivity E-field probe & STE
E-Field probe. HSE probe has 4 ranges, 1v/m ~30v/mFS,
0.5~1,500Mhz. STE probe has 4 ranges 100v/m~3,000v/mFS,
0.5Mhz~6Ghz. Recorder output (0~1Vdc).
narda 8616 Rad at on Hazard mon tor
NAR,8616 AU
Radio frequency radiation monitor complete with probes. Battery
operated with analogue meter and recorder output (3Vdc full
scale). Probe type 8623B has a calibrated frequency range of
300MHz~40GHz over a range of 0.05~100mW/cm2; frequency
range up to 8GHz is calibrated to NATA standard. Probe type
8633 has a frequency range of 10~300MHz over a range of
0.05~100mW/cm2; frequency range up to 200MHz is calibrated
to NATA standard.
narda 8217 m crowave oven survey meter
NAR,8217 AU
Microwave oven survey meter complete with beaker and
thermometer for oven power measurement. Calibration frequency
2.45GHz. Measurement range 0.5~10mW/cm2. Battery operated.
se Internat onal mon tor 4 nuclear/X-Ray mon tor
SE,MONITOR 4 AU/MY
Alpha, Beta, Gamma & X-ray radiation monitor. Meter, LED &
audible indication. Range; 0~0.5, 5, 50mR/hr, 0~500, 5,000,
50,000CPM, 0~5, 50, 500µSv. Energy sensitivity Alpha 2.5MeV,
Beta 50KeV, Gamma & X-ray 10KeV. Battery operated.
Protek 3201 RF Analyser/s gnal meter
PRO,3201 AU/NZ
RF signal analyser and level meter. Provides spectrum
display up to 2.06GHz, audio output, level measurement,
and frequency measurement. Inbuilt antenna. Frequency
range 100kHz~2.06GHz with frequency steps from 5kHz.
Modulation types narrow and wide band FM, AM, and SSB.
Level measurement min frequency - narrow band FM 1MHz,
wide band FM, AM, SSB 10MHz. Bandwidth - narrow band FM
12.5kHz, wide band FM 180kHz, AM & SSB 2.4kHz. Frequency
measurement 9MHz~2.06GHz. Input impedance 50Ω.
Protek 3290 RF Analyser/s gnal meter 2.9GHz
PRO,3290 AU
RF signal analyser and level meter. Provides spectrum display
up to 2.9GHz, audio output, level measurement, and frequency
measurement. Inbuilt antenna. Frequency range 100kHz~2.9GHz
with frequency steps from 5kHz. Modulation types narrow and
wide band FM, AM, and SSB. Level measurement minimum
frequency - narrow band FM 1MHz, wide band FM, AM, SSB
10MHz. Bandwidth - narrow band FM 12.5kHz, wide band FM
180 kHz, AM & SSB 2.4 kHz. Input impedance 50Ω.

emc test eQUIPment
Laplace RF Absorb ng clamp
LAP,RF-CLAMP AU
For measurement of emissions from power and other lines to
CISPR and VDE standards. Frequency range 30 MHz~1GHz.
Output 50Ω.
Laplace sA1000 emc test system
LAP,SA1000 AU
Comprises PC controlled spectrum analyser 10kHz~1.1GHz,
SA1020 pre-amplifier, RF200 broadband antenna 30MHz~1Hz,
TTI LISN1600 LISN, and RF100 E-field & H-field probes.
Supplied with notebook PC and EMC software.
schaffner modula-6100 Immun ty test system
SFN,MODULA 6100 AU
Multifunction generator to simulate electro-magnetic field
interference effects for immunity testing in conformity with
international, national and in house standards including the new
IEC/EN standards. Generates Interference pulses such as burst
and surge and power quality simulations.
schaffner 438 30kV stat c D scharge Generator
SFN,438 AU
Generates an electrostatic charge in a range from 2~30kV. This
instrument is in a ‘gun’ form. Removable discharge network which
can be interchanged with other (optional) impedance networks.
Performs test to IEC1000-4-2 standards.
schaffner Automated step transformer
SFN,INA-6502 AU
Integrated function unit to Modula system. Power line dips to
0%, 40%, 70% and 80%. Complies with EN/IEC 61000-4-11.
Includes EUT power control switch.
schaffner BestPlus B-1
SFN,BEST+ AU
EMC, ESD, PQT, Burst and Surge Immunity generator simulators.
Includes ESD generator/gun.
commUnIcAtIons test sets
marcon 2945 commun cat ons test set
MAR,2945 AU
Output frequency range 400kHz~1.05GHz. Input frequency range
to modulation monitor and spectrum analyser 100kHz~1.05GHz.
Tracking generator with offset tracking inbuilt. Power measurement
to 150W. Full duplex operation. AMPS cellular option included.
Spectrum analyser with 1kHz resolution. AC mains, external
11~32V and internal battery operation. RS232C remote control
interface.
marcon 2945A commun cat ons test set
MAR,2945A AU
Output frequency range 400kHz~1.05GHZ. Input frequency
range to modulation monitor and spectrum analyser
100kHz~1.05GHz. Tracking generator with offset tracking in-built.
Power measurement to 150W. Full duplex operation. Spectrum
analyser with 1kHz resolution. AC mains, external 11~32V dc
on some assets, and external battery operation. RS232C remote
control interface.
HP 8920A commun cat ons test set
HP,8920A AU
RF Communications Analyser test set. Frequency range of
250KHz~1GHz. Includes an AM/FM signal generator, AM/FM
modulation analyser, duplex offset generator, SSB demodulator, RF
power meter, frequency counter, AC/DC voltmeter, SINAD meter,
Distortion meter, oscilloscope and two variable audio sources.
Includes Spectrum analyser with tracking generator. Antenna &
microphone are included.
11

12
POWER METERS & SENSORS - RF
Model Type Frequency Power
HP,8508A Vector voltmeter 100kHz~2GHz 90dB range
HP,E4419B-001 Power meter, high speed, dual channel *9kHz~110GHz *100µW~25mW; *-70~44dBm
HIO,3134 Digital power meter
HIO,3136 Clamp-on power meter 40~500Hz 200~1000kW
BIR,43 RF Thru-line power meter ∆ 450kHz~2.3GHz
According to element
BIR,4391 In-line digital RF power meter ∆ 450kHz~2.3GHz
According to element
PoWeR meteRs & sensoRs - RF
HP 8508A Vector Voltmeter
HP,8508A AU
Narrowband measuring technique gives a range of over 90dB
and a sensitivity of 10µV to trace the smallest signal. Measures
the phase difference between its two input channels with at least
0.1º resolution over a full 180°~-180° range, so they can be
used for another complete set of measurements such as electrical
length, phase distortion, or impedance. 100kHz~1GHz with
high impedance inputs. 300kHz~2GHz with 50Ω inputs. Circuit
probing to facilitate the design process. Easy programming for
ATS’s. Narrowband measurement capability for high sensitivity
applications.
H ok 3134 D g tal Power meter
HIO,3134 MY
AC line power meter, 3 phase W/V/A 1000kw uses two-wattmeter method for 3 wire systems.
Can do 4 wire systems. Digital display plus analogue O/P for all display values V/A/W/VAR.
Watts/VAR can both be O/P together to derive power factor. Supplied with 2x CT’s 3x volts I/P
leads in case.
H ok 3136 clamp-on Power meter
HIO,3136 MY
Power meter 3ph, 4 wire. FSD 200/1000kW 1kA 600/3V 200/1000 kVAR recorder O/P
2V/50Ω 40~500Hz complete with 3 x CT’s 9002 unit will measure 1ph V, A & W. VA & VAR
will need to be calculated. On 3ph it will measure VAR, VA will need to be calculated.
Fluke 36 true Rms Ac/Dc clamp meter
FLU,36 MY
Jaws accept 1 x 750 MCM (1.2 (3mm)) cable or 2 x 500 MCM, (0.98 (24.6mm)) cables
up to 38mmØ. True-rms responding. Display 3.5 digit, 2000 count. Rugged design. AC
current(45~400Hz), range 600A/200A, resolution 1A/.1A, accuracy 10~600A ±(2%+3)
or 0.5~200A ±(2%+5), crest factor 2

PoWeR meteRs & sensoRs - RF contInUeD
B rd RF element for model 43 Power meter
BIR,ELEMENT AU
BIR,ELEMENT-LF MY
BIR,ELEMENT-HF MY
Bird watt meters. Available in various power and frequency ranges.
marcon 6970 D g tal Power meter
MAR,6970 MY
NiCd battery operated with digital display. Complete with ac adaptor. Requires sensor. Sensors
available for 10MHz~26.5GHz frequency range.
Rohde & schwarz nRt-Z43-Z44 D rect onal Power meter
R&S,NRT-Z43-Z44 MY
Measures power and reflection under operational conditions. Wide frequency range from
200(400)MHz~4GHz covers all relevant frequency bands. Measurement method is compatible
with all common analog and in particular digital modulation standards: GSM/EDGE, 3GPP
(W-/TD-CDMA), CDMA (IS-95), CDMA2000, PHS, NADC, PDC, TETRA, DECT, DAB, DVB-T
and many more.
Rohde &schwarz nRt Power Reflect on meter
RS,NRT MY
Measures power and reflection under operational conditions. Wide frequency range from
200(400) MHz ~4GHz covers all relevant frequency bands. Measurement method is
compatible with all common analog and in particular digital modulation standards. GSM/EDGE,
3GPP (W-/TD-CDMA), CDMA (IS-95), CDMA2000, PHS, NADC, PDC, TETRA, DECT, DAB,
DVB-T and many more.
Ag lent Power sensor 1µW~25W, 10mHZ~8GHz
HP,E9300B AU
Power sensor for HP EPM series power meters. E-series
average power sensor. 10MHz~18 GHz, 1µW~25W
(-30dBm~+44dBm).
Rohde & schwarz Power sensor for Rs,FsH
10mHz~8GHz
RS,FSH-Z1 AU
Power sensor for RS,FSH 10MHz~8GHz. 200pW~200mW
(-67dBm~23dBm).
HP e9300H Power sensor 10nW~1W, 10mHz~18GHz
HP,E9300H AU
Power sensor for HP EPM series power meters. E-series Average Power Sensor.
10MHz~18GHz, 10nW~1W (-50dBm~+30dBm).
HP 8481A 10mHz~18GHz Power sensor for HP43X ser es meters
HP,8481A AU
For HP436A, HPE4418B & HPE4419B. 10MHz~18GHz, 1µW~100mW.
Ag lent Power sensor 1mW to 25W, 10mHz to 18GHz
HP,8481B AU
Power sensor for HP 436A, E4418 or E4419 series power meters. 10MHz~18GHz,
1mW~25W.
HP 8484A 10mHz~18GHz Power sensor
HP,8484A AU
Power sensor 10MHz~18GHz, 0.1nW~10µW. Complete with HP,11708A 30dB reference
attenuator.
marcon 6910 Power sensor
MAR,6910 MY
Frequency range 10MHz~20GHz. Power range -30dBm~20dBm (1μW~100mW). Max
RF i/p 25dBm (300mW) CW 42dBm (15W) peak for 2μs. Sensing element semiconductor
thermocouple. VSWR 1.25: 10MHz~30MHz, 1.1: 30MHz~2GHz, 1.18: 2~16GHz, 1.28:
16~18 GHz, 1.4: typical 18~20GHz. Linearity factor provided with sensor. Accuracy ±0.5%
at 25C between 10 & 20dBm. Improves by a factor of 10 for each lower range. Calibration
factor provided with sensor. Accuracy uncertainty provided with sensor. Resolution 0.01%. RF
connector precision N-type (M) 50Ω.
marcon 6912 Power sensor
MAR,6912 MY
Frequency range 30kHz~4.2GHz. I/p power range 30dBm (1μW) to 20dBm (100mW).
marcon 6913 Power sensor
MAR,6913 MY
Frequency range 10MHz~26.5GHz. I/p power range 30dBm (1μW) to 20dBm
(100mW). Max 25dBm (300mW) CW, 42dBm (15W) peak for 2μs. Sensing element
semiconductor thermocouple. VSWR 1.40: 10MHz~50MHz, 1.15: 50MHz~100MHz, 1.10:
100MHz~2GHz, 1.15: 2~12.4GHz, 1.20: 12.4~18GHz, 1.25: 18~26.5GHz. Calibration
factor provided at 1GHz intervals (500MHz intervals above 20GHz) with each sensor. Accuracy
uncertainty provided with each sensor. Resolution 0.01%. Linearity factor accuracy ±0.5% at
100mW, decreasing by 0.005% per 1mW.
marcon 6920 Power sensor
MAR,6920 MY
High sensitivity diode sensor. Frequency range 10MHz~20GHz. I/p power range 70dBm
(0.1nW) to -20dBm (10μW), max 26dBm (400mW) CW +30dBm (1W) peak for 2μs.
Sensing element Shottky barrier diode. VSWR 1.4~1.2 10~40MHz, 1.20 40MHz~10GHz,
1.35 10~18GHz, 1.40 typical 18~20GHz. Calibration factor provided at 1GHz intervals with
each sensor. Accuracy uncertainty provided with each sensor.
marcon 6923 RF Power sensor
MAR,6923 MY
High sensitivity diode sensor. Frequency range 10MHz~26.5GHz. I/p power range -65dBm
(0.3nW) to -20dBm(10μW), max 26dBm (400mW) CW, +30dBm (1W) peak for 2μs. Sensing
element Shottky barrier diode. VSWR 1.4 10~40MHz, 1.15 40~100MHz, 1.12 0.1MHz,
1.17 2~8GHz, 1.30 8~18GHz, 1.50 typical 18~26.5GHz. Calibration factor provided at
1GHz intervals with each sensor. Accuracy uncertainty provided with each sensor. Resolution
0.01%. Linearity factor provided with each sensor. Accuracy ±1% between -30 & -20dBm.
RF connector type N (M) precision 50Ω.
FILteRs
Krohn-H te 3550 Bandpass F lter
KRO,3550 AU
Band pass, band reject, low pass, high pass filter. Frequency range 2Hz~200kHz. Bandwidth
2Hz~3MHz. Max attenuation 62dB. Slope 24dB per octave.
RF AccessoRIes
HP 85021A RF D rect onal Br dge
HP,85021A AU
For HP,8757A scalar network analyser.
HP 11667A Power spl tter
HP,11667A AU
For HP,8757A scalar network analysers, dc~18GHz, 0.5W max. N (F) connector on all ports.
RF connector K t n, Bnc, tnc, smA, APc7
TR,RF-CONN AU
RF connection adaptors. Comprises 10 couplers with interchangeable connectors; 3 x N, BNC,
SMA, & 1 x TNC, all (M) & (F). Includes APC~7 to N (F) adaptor.
HP 11692D Dual D rect onal coupler
HP,11692D MY
Frequency range 2~18GHz.
HP 778D Dual D rect onal coupler
HP,778D AU
Frequency range 100MHz~2GHz.
Rad all R-404850 RF term nat on
RAD,R-404850 AU
RF load. 100W, 50Ω, dc~4GHz. Type N (M).
Flann 1713320 Wavegu de D rect onal coupler
FLA,1713320 AU
20dB.
LF sIGnAL GeneRAtoRs
tektron x AsG100 Aud o Generator
TEK,ASG100 MY
Dual CH for stereo applications. Balanced i/p & o/p. Connects in-line for easy test signal
insertion. Quick identification of insertion pt with voice ID. Short duration audio test sequence for
rapid automatic checkout of audio lines. Single button selection of line-up tone. Manual mode
allows selection of freq & amplitude. RS-232 for remote control.
Genrad 1390B Random no se Generator
GR,1390-B MY
Frequency range 5Hz~5MHz, range selectable 20kHz, 500kHz & 5MHz. Output level 3V,
2V, 1V for each frequency range respectively. Gaussian output. Frequency response 1dB,
20Hz~20kHz. Pink noise filter optional.
DIstoRtIon AnALYseRs
HP 8903B-010-051 Aud o Analyser
HP,8903B AU
Audio analyser for communications and other applications. Measures distortion, sinad, signalto-noise,
ac V, dc V, frequency. Low distortion programmable sine wave source. Frequency
range 20Hz~100kHz. Optional 400Hz high pass and CCITT weighting filters fitted.
13

14
RF ATTENUATORS
Model Type Attenuation (dB) Frequency (GHz) Power Max (W)
WEI,33-10-34 Fixed 10 dc~8 25
WEI,34-30-34 Fixed 30 dc~4 24
WEI,46-03-34 Fixed 3 dc~18 50
WEI,46-06-34 Fixed 6 dc~18 25
WEI,46-10-34 Fixed 10 dc~18 25
WEI,46-20-43 Fixed 20 dc~18 25
WEI,82-30-34 Coaxial attenuator 30 dc~3 1000
WEI,AS6 Calibrated attenuator 3 dc~18 5
WEI,AS20 Variable attenuator 30 dc~26.5 2
WEI,M2-20 Attenuator 20 dc~18
HP,8494B-8496B Coaxial step attenuator 121 dc~18 1
HP,8494B Coaxial step attenuator 11 dc~18 1
HP,8495B Coaxial step attenuator 70 dc~18 1
HP,8494/5B Coaxial step attenuator 81 dc~18 1
HP,8495D Step attenuator 70 dc~26.5 1
BIR,25A-10 Fixed 10 dc~4 25
BIR,8080 Coaxial resistor dc~3.5 25
NAR,705-69 Attenuator 30 dc~18 25
RF AttenUAtoRs
We nschell 33-10-34 25 W 10dB 8.5GHz RF Attenuator
WEI,33-10-34 AU
10dB, 25W, dc~8GHz. Type N connectors.
We nschell 34-30-34 25W 30dB 4GHz RF Attenuator
WEI,34-30-34 AU
30dB, 25W, dc~4GHz. Type N connectors.
We nschell 46-03-34 50W 3dB 18GHz RF Attenuator
WEI,46-03-34 MY
We nschell 46-06-34 50W 6dB 18GHz RF Attenuator
WEI,46-06-34 MY
DC - 18GHz, 6dB, average power 25W, 200W peak. Type N connector.
We nschell 46-10-34 50W 10dB 18GHz RF Attenuator
WEI,46-10-34 MY
DC - 18GHz, 10dB, average power 25W, 200W peak. Type N connector.
We nschell 46-20-43 25W 20dB 18GHz RF Attenuator
WEI,46-20-43 AU/MY
DC~18GHz, 20dB, 25W. Type N connectors.
We nschel 82-30-34, 30dB 1000W 3GHz coax al
Attenuator
WEI,82-30-34 AU
30dB 1000W 3GHz Coaxial Attenuator. DC to 3GHz.
We nschell As6 cal brated Attenuator set
WEI,AS6 MY
Frequency range DC-18GHz, set consists of 4 different nominal value 3, 6, 10 & 20dB.
Connector type N per mil-STD-348, power rating 5W.
We nschell As20 Prec s on Attenuator set
WEI,AS20 AU
DC~26.5GHz. Attenuator values 6,10,30dB. Average power 2W. 3.5mm connectors.
We nschell m2-20 Attenuator
WEI,M2-20 MY
20dB attenuator. DC to 18GHz, double male N type
HP 8494B/8496B Attenuator set 121dB x 1dB
HP,8494B-8496B AU
Coaxial step attenuator set. DC-18GHz. 0.11dB in 1dB steps and 10-110dB in 10dB steps.
Type N(f) connectors. Comprises a connected set of types 8494B & 8496B with 11716A rigid
interconnect kit.
HP 8494B 11 x 1dB 18GHz coax al step Attenuator
HP,8494B AU
DC~18GHz. 0~11dB in 1dB steps. 1W average power handling. Option 001. Type N(f)
connectors.
HP 8495B 70dB x 10dB coax al step Attenuator
HP,8495B AU
DC~18GHz. 0~70dB in 10dB steps.
HP 8494/5B coax al step Attenuator set 81dB x 1dB
HP,8494/5B MY
DC~18GHz. 0~11dB in 1dB steps. 11~81dB in 10dB steps. Comprises a connected set of
types 8494B & 8495B. Type N(f) connectors.
HP 8495D 70dB 26.5GHz step Attenuator
HP,8495D AU/MY
70dB step attenuator in 10dB steps. Frequency range dc~26.5GHz. Max continuous power
1W. Note attenuator uses 3.5mm connectors.
B rd 25-A-mFn-10 10dB 25W 4GHz AttenUAtoR
BIR,25A-10 AU
RF Attenuator, DC~4GHz, 10dB, 25W, .
B rd 808 RF co-ax al Res stor 25W 50Ω
BIR,8080 MY
50Ω, 25 W, DC-3500MHZ. Dummy Load.
narda 705-69 69 x 1dB GHz Attenuator
NAR,705-69 MY
Step Attenuator. 0 - 69dB in 1dB steps. Frequency range DC - 18GHz

tV test eQUIPment
Rohde & schwarz eFA tV test Rece ver 43
RS,EFA43 AU
DVB-T test receiver, fully compatible with the ETS300 744
standard, receives, demodulates, decodes and analyzes
OFDM (orthogonal frequency division multiplex) signals. All key
parameters for demodulating the receive signal can be selected
automatically or manually. Features, 7MHz SAW filter. 6MHz,
7MHz or 8MHz operating bandwidth. 2K or 8K OFDM modulation.
QPSK, 16QAM or 64QAM constellation diagram. 1/2, 2/3, 3/4,
5/6 or 7/8 code rate. 1/4, 1/8, 1/16 or 1/32 guard interval.
Hierarchical demodulation. Reed-Solomon error correction
204/188.
Promax mc360B cable/sat tV Level
meter
PRO,MC360B AU
TV analyser Integrates all functions for installing, surveying and
servicing television signal distribution systems, whether individual
or collective, in FM, TV and satellite bands. As S band is covered
too, this unit can be used in cable television (CATV) fittings as well.
Accurate level measurement in the 48~856MHz band. Signal
demodulation is available both in AM and FM enabling audio
monitoring. SAT TV frequency range (950~2,050 MHz) includes
detection function for searching the parabola positioning and
since it is not frequency selective any signal in a covered band is
detected. Frequency tuned is read digitally.
Promax tV explorer Prod g-5
PRO,PRODIG-5 AU/NZ
For the installation, maintenance and surveillance of terrestrial,
satellite and cable TV systems. Automatically provides information
about the channels available in the network and their quality.
Displays analogue and digital channel picture. Includes a high
resolution spectrum analyser function and MPEG decoding. Foxtel
approved.
Promax Prol nk 4c Prem um Analogue/D g tal tV
test set
PRO,PROLINK4C-PREM AU
Measures terrestrial, satellite and cable TV systems including
analogue and digital VHF & UHF bands. Built in colour monitor
provides measurement readout and can be used to display video
signal. Measurement functions include spectrum analysis, direct
signal level readout, carrier to noise, channel power, digital carrier
to noise, digital bit error ratio (BER) and digital QAM constellation.
DVB digital TV channel identifier. Logs to PC and includes software
for remote control and channel plan management.
Barco Quasar modulator
BAR,MODULATOR AU
Digital television signal converter. Rack mounted. Supports a full
range of variable data rates, signal bandwidths and constellations.
Complies with ITU-TJ.83 standards, annex A (DVB), B (open
cable) & C Japan. ASI input interface (with active loop-through).
Variety of input interfaces available. Bit stuffing on/off and PCR
re-stamping. Static PID filtering. Tuneable or fixed output RF
frequency. IF loop. Front panel RF testpoint (-20dB). 60dBmV
(rms) output level. Front panel LCD and buttons for easy set-up.
Full remote control and diagnostics with ROSA management.
Back-up and automatic level control available with ROSA.
teLecommUnIcAtIons
nettest L te 3000e s gnall ng Analyser for
telecommun cat ons systems
GNE,L3000E-ND AU
Simultaneous monitoring in both directions of 2Mb/s PCM lines.
Tests framed Nx64 Kb/s & unframed 2Mb/s PCM systems.
Remote operation with MS Windows. Frame Relay installation
testing, trouble shooting & decode. All-layer protocol analysis and
decode options for ISDN. ISDN Call Emulation option provides the
necessary functionality for testing ISDN connections, can setup
and receive ISDN calls with user-specified parameters.
Anr tsu me538mLA tX & RX m crowave L nk Analyser
ANR,ME538M AU
Measures group delay, modulator/demodulator linearity & sensitivity, differential gain & phase,
IF/BB amplitude response, IF/BB return loss, frequency spectrum & deviation, am to pm
conversion coefficient, power, gain attenuation and dc characteristics. Features: LED display,
autorange CRT, push button parameter selection and remote monitoring. 70/140MHz bands:
83.333, 250, 500kHz & 2.4, 3.58, 4.43, 5.6, 8.2, 12.39MHz.
nettest ePe06/7 2,8,34,140 mPPs BeRt
GNE,EPE06/7 AU
PCM BERT tester for 2, 8, 34 & 140 Mb PCM systems. Performance according to G.821 with
BNC type connectors. For unbalanced inputs.
nettest mPA7400 mult channel s gnall ng Protocol Analyser
GNE,MPA7400 AU
Multichannel telecom protocol analyser for detailed analysis of signalling systems such as SS7. Able
to analyse 4 channels at the same time. Some emulation capability. Additional protocol decodes
available on request. Set up to handle signalling analysis for cellular telephone exchanges.
trend Aurora sonata BRA/PRI IsDn test set
TRE,AURORA-SONATA AU
BRI/PRI/POTS test set. Provides simulation and monitor capabilities for Primary Rate, Basic
Rate, and POTS services. Provides decoding of ETSI ISDN protocols. Has S,U,E1 and RJ11
POTS interfaces. Battery operated hand held device.
D g tal L ghtwave nIc 2.5G stm16 2.5Gb sDH test set
DLW,NIC2.5G AU
Portable analyser with touch screen PC built in. Provides testing at
SDH rates of STM0e/1e/0/1/4c/4/16c/16 (52,155,622Mbps
& 2.5Gbps). Also tests PDH at E1,E3, E4, DS1 & DS3
(2,8,140,1.5,45 Mbps) . Dual wavelength 1310/1550nm for
all STM rates. SC Optical connectors. BERT and signal level
functionality included. Comes complete in portable hardcase..
D g tal L ghtwave nIc10G stm16/64 sDH Analyser
DLW,NIC10G AU
Network information computer. Verifies and qualifies the performance of OC-192c/OC-48c
SONET, STM-64/STM-16 (10/2.5Gbps) SDH and DWDM telecommunications networks. Optical
interfaces (1550/1310nm for STM16 & 1550nm for STM64). Includes concatenated payload
support and OC-48/STM-16 add/drop. 10.4” active matrix touch screen GUI operation. Measures
optical power and frequency. PCMCIA slots for memory cards and peripherals.
D g tal L ghtwave nIcPlus 10G sDH tester w th Gb ethernet
DLW,NICPLUS10G AU
Portable Gb/OC-192/STM-64 Network Information Computer (5 slot chassis). Multirate interface
for STS-1 OC-1/3/3c/12/12c/48/48c STM-0e/1e/0/1/1c/4/4c/16/16c and interface for OC-
192/192c STM-64/64c with the ability to monitor down to the STS-1/STM-0 level inside of any
supported optical rate. Use to verify & qualify the performance of SDH & DWDM & GbE telecomm
networks. Electrical & optical interfaces (1550nm for 10G, all other rates 1310/1550). Includes
concatenated payload support & OC-48/STM-16 add/drop. G.709/975 OTU 1 / OUT 2 FEC
software installed 10.4 inch active matrix touch screen GUI operation. Measures optical power and
frequency. PCMCIA slots available for memory cards and peripherals.
Fluke 990DsL copperPro telecom L ne & DsL test
set Analyser
FLU,990DSL AU
CopperPro wide range Plain Old Telephone Services (POTS) fault
location and line qualification capabilities. Includes Wideband/TDR
option which adds high frequency transmission testing and
qualification functions for services like ADSL, HDSL, HDSL2,
HDSL4, ISDN, T1, E1 and DDS. TDR feature adds precise fault
location and analysis. Includes TN2100 remote terminator
W&G/Acterna Ant 20 sDH/PDH Analyser
WG,ANT20 AU
Interfaces for PDH data streams at 2, 8, 34, & 140Mb/s, electrical and optical interfaces for
SDH at STM1 (155Mb/s). Jitter and wander generators and analyser options are fitted. Internal
PC with FDD for transferring results. Serial, parallel, keyboard and pen interfaces.
15

16
LAn AnALYseRs/mAnAGement
Fluke nettool LAn Analyser
FLU,NETTOOL AU
VoIP monitoring. Bi-directional LAN test tool. Diagnose VoIP
phone boot-up problems, call control and measure key call quality
metrics. Compatible with IP phones employing either SIP or SCCP
call control protocols. VoIP Log displays call control events, QoS
configuration, and call quality metrics. Boot Log displays key boot
events such as DHCP address acquisition, DNS lookup of call
servers and gateways, downloading of operating files, and call
server registration. Inline testing of LANs at the workstation level.
Tool is plugged in-line between workstation and LAN. Provides
indications of NIC and hub functionality, cable connectivity, and
protocol compatibility between LAN and workstation. Use as a first
line fault finding tool for IT departments.
A rmagnet Portable 802.11 a/b/g survey system
AIR,AIRMAGNET-SURVEY AU
Portable wireless network survey tool for 802.11a, 802.11b and
802.11g wireless networks (5 & 2.4GHz). Provides mapping of
wireless network coverage with optional GPS location facility. Preloaded
on laptop computer with approved wireless network card.
A rmagnet Portable 802.11 a/b/g W reless
network Analyser
AIR,AIRMAGNET-TRIO AU
Portable wireless network analyser for 802.11a, 802.11b and
802.11g wireless networks (5 & 2.4GHz). Validates WEP, 802.1x,
LEAP, TKIP, MIC, VPNs. Provides security policy validation and
intrusion detection. Detects denial of service attacks. Provides
active performance analysis and identifies and pinpoints WLAN
Faults. Includes Find Tool for tracking down rogue devices and
70+ configurable alarms with expert advice. Pre-loaded on P3
notebook computer.
Fluke networks etherscope G gab t LAn Analyser
FLU,ETHERSCOPE-EX AU
Full duplex 10, 100 and Gigabit Copper and Fibre LANs, for
troubleshooting, verification, installation and maintenance.
(Wireless analysis with FLU,Etherscope-WLAN model.) RFC 2544
tests - use to fully characterize link performance. ITO tests - use
to quickly verify the throughput of a link. Document network
performance. Troubleshoot in a switched environment. Comes
complete with cable ID accessory for tracking cable routes.
Fluke opt v ew Pro G gab t 10/100/G gab t LAn
Analyser
FLU,OPTIVIEW-GIG AU
Provides network analysis on 10/100/Gigabit Ethernet networks
(multimode fibre & copper). Active discovery in switched networks,
full 7 layer analysis, fully automatic IP configuration even without
DHCP, address-to-name mapping, packet capture and decode,
SNMP device analysis, RMON II traffic analysis. Gigabit testing
capabilities, and basic cable testing (wiremap, return loss, etc).
HP J3446c 10/100 ethernet Analyser
HP,J3446C AU
Has RJ45 and AUI ports. AUI ports allow fibre or co-ax
connections to be made with appropriate adaptor (adaptor not
supplied). For use with HP internet advisor undercradles for FDDI
or similar analysis.
W&G/Acterna Dom no G gab t
WG,GIGABIT AU
For monitoring, troubleshooting, and simulation of Gigabit Ethernet
networks. Provides full line rate, full duplex analysis of Gigabit
Ethernet networks. All transmit, capture, filtering, and statistics are
provided at full line rate. Expert analysis software provides easy
diagnosis of network faults, and decodes over 300 protocols.
Link configuration status is detected automatically and equipment
auto configures itself to suit the detected status. Provided with
hot swappable modules for single mode and multi mode fibre
interfaces (LX & SX interfaces). Complete with laptop computer
configured for the analyser.
LAn/WAn AnALYseRs
Fluke networks etherscope G gab t W-LAn Analyser
FLU,ETHERSCOPE-WLAN AU/NZ
Etherscope extended kit full duplex 10/100/gigabit LAN & WLAN
ITO, RFC, 2544 & 802.11a/b/g analyser. Handheld analyser
for discovery of network elements and fault location. Discovers
devices by IP subnets, NetBIOS domains, and IPX networks. VLAN
discovery shows interface status, connected host details, and
trending data. Allows measurement of device details and statistics.
Complete with cable ID accessory for tracking cable routes.
nettest W npharoah 2 LAn/WAn Analyser
GNE,WINPHARAOH2 AU
Capable of 10/100Mbps Ethernet and up to 2Mb WAN with the following interfaces: V.35,
RS-232, RS-449, and V.11/X.21. Has BERT testing for WAN. Report writing software installed
for quick overview of network status.
sp rent/netcomm smartb ts smB200 Router tester
SPI,SMB200-10/100 AU
4 port 10/100 ethernet/STM1 ATM system for determining router performance including latency,
latency variation and jitter. Can load network with specific definable traffic to determine routing
performance & discover throughput bottlenecks. Includes 4x ML7710 10/100 interface cards.
sp rent netcomm smartb ts smB600 ma nframe
SPI,SMB600 AU
Mainframe for router test system for determining router and network performance including
latency, latency variation and jitter. Can be used to load network with specific definable traffic
to determine routing performance and discover throughput bottlenecks. Supplied with standard
software and 30 version of Smartflow application. Requires appropriate interface cards.
sp rent smartb ts LAn-3101A Interface for smB600/6000 chass s
SPI,SMB600-3101A AU
sp rent smartb ts LAn-3201B Gb card for smB600/6000
SPI,SMB600-3201B AU
sp rent smartb ts LAn-3310A 2Port Gb card for smB600/6000
SPI,SMB600-3310A AU
sp rent netcomm smartb ts smB6000 ma nframe
SPI,SMB6000 AU
12 card Mainframe for router test system for determining router and network performance
including latency, latency variation and jitter. Can be used to load network with specific definable
traffic to determine routing performance and discover throughput bottlenecks. Supplied with
standard software and 30D version of Smartflow application. Requires appropriate interface cards.
WAn AnALYseRs
HP 4951c 19.2Kbps Protocol Analyser
HP,4951C AU
Serial data and protocol analyser. 50~19,200 baud data transfer rates for monitoring,
simulating and triggering. Data codes: ASCII, EBCDIC, BAUDOT, six bit transcode (SBT), IPARS
and EBDIC. Protocols: X.25. BSC, HDLC, SDLC, IPARS and user definable. Error checking:
CRC-CCITT, CRC-6/12/16, LRC, parity and block error rate testing (BERT), 5, 6, 7 or 8 bit
per character parity, 1,1.5 or 2 stop bits. Full ASCII keyboard, up to 63 triggers, 32kb buffer
memory, 618kb integral microfloppy drive, video output, separate printer output. Complete with
HP,18179A RS-232C/V24 interface with full breakout box.
HP 4957A 64Kbps Protocol Analyser
HP,4957A AU
Protocol analyser. For up to 64kb/s (option included for asynchronous 8-bit and NRZ/NRZI bit
oriented protocols up to 256 kbps). Protocols include ISDN Q.921, X.25, SDLC, HDLC, IPARS,
BSC, ASYNC, and most character synchronous protocols, (option included for X.21). BERT
function. Data codes ASCII, EBCDIC, BAUDOT, 6 bit transcode (SBT), IPARS, EBCD and HEX.
32 kB non-volatile memory, 786 kB volatile memory, 613kb microfloppy, 128kb non-volatile
RAM disk. Complete with RS-232C, RS-449 and V35 interfaces, printer and video outputs.
nettest Fastnet Probe
GNE,FP1601SR AU
Fastnet probe for Frame Relay. Provides monitoring and statistical information for Frame Relay
Networks. Complete with interface cable and management software.
HP J2302B 2 mbps WAn Analyser
HP,J2302B AU
Internet advisor. WAN analyser from 50b/s~2.048Mb/s. CEPT-E1 and V series WAN protocol
analyser. Includes: RS232/V24, V35, RS449, and CEPT-E1 analysis to 2Mb/s with BNC
connectors. ISDN primary rate analysis available with HP,18284A pod. Full monitor and
decoding of major protocols over any channel. Fractional channel or full CEPT-E1. Complete
English decodes with customizable displays. Time stamp for captured data or statistics, 100ns
resolution. Extensive data filtering capability. Real time statistical including LAN traffic analysis
over WANS. 100% capture. performance during full line loading. Simultaneous decodes
statistics, triggers, and filters. Log to hard drive. Full Bit Error Rate tests to 2mb/s (BERT)
including G821. Over 150 prewritten tests included.

LAn cABLe testeRs
Fluke DtX1200 category 6 cable cert ficat on tester
FLU,DTX1200 AU/NZ
Cable certification tester up to 350MHz; Cat 6 Autotest time of
12 seconds. Comes complete with latest category 6 PM-06
personality modules, Linkware PC software, and USB cable.
Internal memory stores results. Tests to Category 3,4,5,5E, & 6.
Fluke DtX1800 category 7 cable cert ficat on tester
FLU,DTX1800 AU/NZ
Cable certification tester up to 900 MHz; Cat 6 Autotest time
of 12 seconds. Linkware PC software, and USB cable included.
Internal memory stores results. Tests to Category 3,4,5,5E, 6,
6a and 7.
Fluke DtX-GFm F bre Adapter for DtX
cable Analyser
FLU,DTX-GFM AU
Set of two DTX Gigabit Multimode Fiber Modules. Incorporating:
850nm VCSEC source and 1310nm laser source combined
into a single output port, 850/1300/1310/1550nm power
meter, integrated VFL, for qualification of 50/125 and 62.5/125
multimode fiber.
Fluke DtX compact otDR sm-mm
FLU,DTX-OTDR AU
Full featured Multi & Singlemode OTDR module that snaps onto
a DTX CableAnalyser. With the addition of the DTX1200 or
1800, it makes this powerful certification tool a complete, easy
to use OTDR that shoots and analyses traces on singlemode and
multimode fiber.
Fluke DtX 10 G g copper test ng and cert ficat on K t
FLU,DTX-10G KIT AU
Used in conjunction with the FLU,DTX1800. Enables testing
and certification of twisted pair cabling for 10 Gigabit Ethernet
deployments - whether it is an existing Cat 6 or newly installed
augmented Cat 6 cabling system. Measures the performance for
10 Gig and Alien Crosstalk (ANEXT and AFEXT) in full compliance
with the industry standards to 500 MHz.
Fluke DtX-mFm mult mode F bre Adaptor for DtX
cable Analyser
FLU,DTX-MFM AU/NZ
DTX1200/1800 multimode fibre interface. Tests fibre installations
in local area networks. Fits in the slot on the back of DTX cable
analyser (standard copper cable adaptors can be connected but
not used simultaneously). Provides fibre testing and certification.
Bi-directional testing at 850nm & 1300nm at the same time.
Measures optical power loss, length, and propagation delay
for multimode fibres. Pass/fail results based on common fibre
standards. SC optical connectors. Includes in built visual fault
locater. (VFL)
Fluke DtX-sFm s nglemode F bre Adapter for DtX
cable Analyser
FLU,DTX-SFM AU
DTX1200/1800 singlemode fibre interface. Use for testing fibre
installations in local area networks. Fits in the slot on the back
of DTX cable analyser (standard copper cable adaptors can be
connected but not used simultaneously). Provides fibre testing
and certification. Bi-directional testing at 1310 nm and 1550
nm at the same time. Measures optical power loss, length, and
propagation delay for multimode fibres. Pass/fail results based on
common fibre standards. SC optical connectors. Includes in built
visual fault locater. (VFL)
Fluke DsP Personal ty module for DsP4X00 ser es
FLU,DSP-PM AU
Personality module for Fluke DSP4X00 cat6 Permanent Link
heads. RJ45 connector sets (PM-01, PM-06, PM-25) include
2 modules. Block connector sets include one module (PM-12B,
PM-13B). Modules available include PM-06 (most systems),
PM-25 (most unshielded systems), PM-01 (legacy), PM-12B
Paduit GIGA-PUNCH 110 block, PM-13B Siemon S210 block.
Fluke networks cableIQ cable & network
Ident ficat on tool
FLU,CABLEIQ AU
CableIQ cable and network tester for twisted-pair, coax, and
audio cabling. Allows troubleshooting connectivity problems and
qualify cabling bandwidth to see whether an existing cabling link is
qualified to support 10/100, VoIP or Gigabit Ethernet. Discovers
what is at the far end of any network cable. Detects speed and
duplex settings of attached switches and PCs. Intelligent wiremap
graphically shows distance to faults (e.g., pin 1 break at 31m).
Can also test cable set-up for audio application (intercom/PA).
Hand held and lightweight, powered by 4 x AA Alkaline batteries.
Can be used as a signal source for optional Intellitone cable tracer.
17

18
FIBRe oPtIcs
K ngfisher KI7822B- KI7600A sm
L ght source & Power meter
KIN,KI7822B-7600A AU
Light source (KI7822B) and Power meter (KI7600A) optical fibre
test set for singlemode applications (1310nm and 1550nm).
Both units have SC, FC and ST interchangeable connectors.
Power meter has large user memory and flexible real-time PC
reporting software. Autotest provides automatic multi wavelength
loss testing. The meter displays mW, uW, nW,dB,dBm to 0.01dB
resolution, with no range changing delays. Power meter can be
used for multiple single and multimode wavelengths. Laser output
power 0dBm.
K ngfisher KI7827 sm APc - KI7600A
Power meter
KIN,KI7827B-7600A AU
Light source (KI7827B) and Power meter (KI7600A) optical
fibre test set for singlemode applications such as FTTH (1310,
1490 and 1550nm). Light Source has Angled SC, FC and ST
interchangeable connectors. Power meter has large user memory
and flexible real-time PC reporting software. Autotest provides
automatic multi wavelength loss testing. The meter displays
mW, uW, nW,dB,dBm to 0.01dB resolution, with no range
changing delays. Power meter can be used for multiple single and
multimode wavelengths. Laser output power 0dBm.
F ber V deo D splay scope
FLU,FT330 AU
Handheld battery operated video scope for fiber inspection.
F ber Inspect on V deo Probe X 250 magn ficat on
FLU,FT350 AU
Connects to a FLU,OPTIFIBER or FLU,FT330 to let you inspect the
ends of fiber optic connectors. 250 X magnification reveals dirt,
scratches, and other defects that can cause poor performance or
failures in fiber optic networks.
F ber Inspect on V deo Probe X 250
& 400 magn ficat on
FLU,FT650 AU
Fibre probe for use with Fluke Optifiber OTDR or FLU,FT330
handheld video scope. Has switchable 250 and 400 times
magnification.
Fluke FtK150 opt cal F bre L ght
source/meter
FLU,FTK150 AU
Light source is multi-mode 850nm and 1300nm. Power meter
has calibrated measurements at 850/1300nm multimode
and 1310/1550nm single mode. +3dBm+E23-55dBm
measurement range with 0.01dB resolution. Manage results and
print reports via power meter memory, PC and supplied software.
Supplied with various connectors and patch leads.
Fluke FtK200 opt cal F bre Power meter/L ght
source
FLU,FTK200 AU
Comprises light source and power meter. Light source is
multi-mode 850nm & 1300nm (-20dBm into 62.5µm fibre).
Stability is ±0.1dB per 8h at 250C. Power meter has calibrated
measurements at 850/1300nm multi-mode & 1310/1550nm
single-mode. 6dBm~-50dBm measurement power with 0.01
resolution & accuracy of ±0.25 at 250C & -10dBm. Power
meter memory stores up to 500 results at each wavelength which
can be downloaded to PC with supplied software (also compatible
with Fluke Cable Manager used for the DSP4000/4100 series).
ST connector on power meter and light source.
Fluke opt fibre mult -mode otDR
FLU,OPTIFIBER-MM AU/NZ
Short range multimode OTDR designed for testing, troubleshooting
and certifying network cabling. 850/1,300nm, 62.5mm (100m
launch cable included) & 50mm (requires launch cable) fibres with
SC connectors. Attenuation deadzone 850nm: 4.5m typical, 5.5m
max 1,300nm: 10.5m typical, 15m max. 3km range for 850nm &
7km range for 1,300nm. Measures insertion loss and fibre length,
allows automatic and manual OTDR analysis including channel map
of connectors. Included LinkWare PC software documents, reports
and manages all test data. Battery operated with colour display.
Acterna omK-6 F bre opt c Power meter
WG,OMK-6 NZ
OMK-6 optical power meter with multi mode and single mode light sources. Level
measurement is -65~+10dBm. Measurement errors are eliminated because the power
meter automatically detects the wavelength being transmitted by the light source. Single
mode dynamic range with continuous wave is 58dB (approx 145km@1310nm &
230km@1550nm). Multi mode dynamic range with continuous wave is 40dB (approx 20km
at 850nm & 50km at 1310nm).
Acterna omK-14 opt cal measurement K t
WG,OMK14 MY
Kit consists of WG,OLS-15 (light source) and WG,OLP-15 (power meter). WG,OLS-15;
1310nm & 1550nm, o/p; 7dBm (into 9/125µm) mod frequency: 270Hz, 1kHz, 2kHz.
WG,OLP-15; 800~1700nm, switchable at; 850, 980, 1310, 1480 & 1550nm. Sensor type
InGaAs, suitable fiber type 9/125a~50/125µm. Mod detection; 270Hz, 330Hz, 1KHz, 2KHz.
Display range -70~11dBm.
nettest cmA 5000 s nglemode 43/45dB otDR
GNE,CMA5000SM-45 AU
Single mode OTDR with SC/APC (angled) adaptor.
1310/1550/1625 dynamic range 43/45/43dB. +20dBm meter
and light source, and VFL (Visual Fault Locator). OTDR has built in
CD-R/W and 20GB hard drive. Dedicated touch screen and hard
key user interfaces. Mains and battery operation, battery life >3h.
10/100MB Ethernet port for network connectivity. USB ports.
nettest cmA 5000 s nglemode 40 otDR
GNE,CMA5000SM-40 NZ
Single mode OTDR with SC/PC adapter. 1310/1550 Dynamic range 40/40dB. This
instrument has built in CD-R/W and 20GB hard drive. Dedicated touch screen and hard key
user interfaces. Mains and battery operation, battery life >3 hours. 10/100MB Ethernet port
for network connectivity. USB port.
Anr tsu cmA 4500 s ngle &
mult mode 35/25dB otDR
GNE,CMA4500SM-MM AU
Singlemode and Multimode OTDR. Includes wavelengths
multimode 850/1300nm (24/26dB) and singlemode
1310/1550 (35dB) with SC/PC connecters. Built-in CD R/W
drive, Ethernet connectivity, USB and PS2 ports. Touch screen and
hard key interfaces.
nettest cmA4000 s ngle mode otDR
GNE,CMA4000SM AU
Includes mainframe and 1310/1550nm and 1625nm (38/40 &
39dB) single-mode module (module part number TD-14M25003
Model 4425). Instrument has built in FDD and supplied with
SC/PC, FC/PC, and ST/PC connectors.
nettest cmA4000 1310/1550nm (40dB) s ngle mode module
GNE,TD-14M36003 AU
For the GN Nettest CMA4000 OTDR mainframe. Module has SC/PC & FC/PC connectors.
Operating wavelengths are 1,310nm (40dB) & 1,550nm (40dB).
Yamasak Y16 F bre cleaver
YAM,Y16 AU
Precision fibre cleaver. This cleaver can be used with precision splicers for single and
multimode fibres.
Yamasak Y80 core Al gnment Fus on spl cer
YAM,Y80 AU
Precision core alignment single and multi mode fusion splicer.
Instrument is fully automatic or manual and provides a typical
splice loss of 0.02dB on single mode fibre, and 0.01dB on multi
mode fibre. The instrument has automatic environment sensors,
operates from -10C~50C, 95% humidity and operates up to
4000m. Includes a built-in heater for applying splice protectors
and a splice tension tester. Front mounted colour display and can
be operated from AC (176-264V, 47-63Hz), or battery.

FIBRe oPtIcs contInUeD
F tel s325A Prec s on F bre cleaver
FIT,S325A AU
Can be used with precision splicers for single and multi mode
fibres. Features a built in sharps collection bin which automatically
stores fibre offcuts as each fibre is cleaved.
F tel s177A core Al gnment Fus on spl cer
FIT,S177A AU/NZ
Precision core alignment single and multi mode fusion splicer. Fully
automatic and provides a typical splice loss of 0.02dB on single
mode and 0.01dB on multi mode. Splice time 9sec. Temperature
range -10~50ºC, humidity range up to 90% at 38ºC, and altitude
sensors operate up to 4000m which adjust arc time and intensity
as required. Includes a built-in heater for applying splice protectors
and a splice tension tester (200g). Front mounted colour display.
AC mains operation 100~240V, or battery (up to 70 splices).
Excludes cleaver which must be rented separately.
F tel s323B F bre cleaver
FIT,S323B AU/NZ
Use with precision splicers for single and multi mode fibres. Built
in sharps collection bin automatically stores fibre offcuts as each
fibre is cleaved.
F tel s121A V-Groove Fus on spl cer
FIT,S121A AU
Splice loss is 0.1dB for single mode & 0.05dB multi mode. Splice
time is 13s. Includes splice protector heat shrink heater and splice
tension tester (200g). Operates from ac (100~240V) or battery
(up to 30 splices & heatings per charge). Cleaver excluded.
F tel s176cF core Al gnment s ngle & mult mode
Fus on spl cer
FIT,S176 AU
Fully automatic. Typical splice loss of 0.02dB on single-mode
& 0.01dB on multi-mode. Splice time 13s. Temperature range
-10~500C, humidity range up to 90%RH at 380C & altitude
sensors (operates up to 3,658m) adjust arc time & intensity.
Includes heater for applying splice protectors and splice tension
tester (200g). Front mounted colour display. AC mains operation
100~240V, or battery (up to 60 splices & heat shrinks per
charge). Cleaver excluded.
300m mult mode F bre opt c Launch cable
FIB,MULTI/300M AU
Multimode fibre test cable. 300 metres.
Anr tsu mG921A 1300nm stab l sed L ght source
ANR,MG921A MY
Use with multi-mode/single-mode fibre of 1.3µm wavelengths.
Unprecedented light o/p level & wavelength stability through use
of APC & temperature control ccts. Internal & external modulation
functions are provided, permitting removal of stray light.
nettest tD-4791-cL DWDm opt cal spectrum
Analyser module
GNE,OSA-TD4791CL AU
For dense wavelength division multiplexing applications. Can
be used over optical fibre C (1,530nm~1,570nm) & L bands
(1,570nm~1,628nm). Use with CMA-4000 mainframe.
Resolution to 10GHz. For all WDM applications including high
density of 80 channels and above.
nettest nexus Polar sat on mode D spers on Analyser
GNE,PMD AU
For optical C-band measurements. 55dB dynamic range. For
measurements on optical fibre for qualification for DWDM or
analogue video applications.
noyes oFs300 F bre opt c cable m croscope
NOT,OFS300 AU
Fibre optic cable microscope
cABLe/PIPe testeRs & LocAtoRs
megger mPP1002 cable Fault P npo nter/P n Po nt Locator
MEG,MPP1002-FAULT PP AU
Specifically designed for service, industrial and power utility companies. Pinpoints faults in
shielded and direct buried primary cables via a single Geophone or dual Geophone probe.
Stand-alone unit (without probes) measures electromagnetic surge and supplies the amplitude
of that surge which aids in finding the fault. The versions can successfully detect both the
electromagnetic and acoustic pulses emitted from an arcing fault when it is surged. Can also
be used with any Megger PFL Power Cable Fault Locating system (or) any surge generator.
Advantages:- Cable fault distance and direction via single or dual detection configuration,
Rugged, compact weather resistant housing, Ambient noise reduction headphones, easy,
trouble-free probe connection with a detachable cable system, fault detection up to 50ft away
and extended battery life, ballistic pulse scale provides thump magnitude and surge period,
background interference elimination via selectable acoustic frequency band.
Fluke Intell tone Pro 200 K t
FLU,INTELLITONE PRO AU
Locate, isolate, and validate twisted pair (UTP, Cat 5e, Cat 6), coax
cables (RG6, RG59, and others for CATV/CCTV), bare wire (such
as speaker wire and security network wire), and Cat 3 telephone
cabling. The toner also lets you validate voice and data services.
tempo te-508s cable Locator
TEM,508S AU/NZ
Tempo 508S Cable Locator for locating buried or in-wall wiring.
Compact design. Provides results on buried cables to depths
of 1 meter and lengths up to 300 meters. Can be used to
determine approximate depth of a wire or cable before you dig.
Fully adjustable transmitter output and receiver gain Transmitter
frequency is 447.5KHz. Transmitter can be connected directly
to AC power outlet. Transmitter runs approximately 35 hrs and
receiver runs approximately 20 hrs from standard 9V batteries.
Pathfinder PF610 c rcu t tracer K t
PAT,PF610 AU
For tracing concealed power cabling and other signal or data conductors. Comprises a
transmitter and a detector. Transmitter when connected to a cable generates a 4.6kHz current
pulse by drawing low current from the cable circuit. In the case of data and signal circuits
a 9V battery can be used to power the cable. This may require disconnection of computer
equipment, etc. Detector gives audible and visual indication of the signal field. Trace 1 & 3
phase cables, coax, buried unpowered cable, locate fuses, etc.
Haganuk teleflex 2000 cable Fault tester
HAG,2000 AU
Time domain reflectometer for power cables. Measuring ranges : 250, 500, 1,000, 2,500,
5,000, 10,000, 25,000 & 50,000ft. Pulse widths: 10, 100, 200, 1,000, 2,000 &
10,000ns. Accuracy: ±1% typical,

20
cABLe/PIPe testeRs & LocAtoRs contInUeD
megger tDR2000 tDR cable Fault Locator
MEG,TDR2000 NZ
Minimum resolution of 0.1m and a maximum range of 20km
at 0.9VF and 16km at 0.65VF. Perform single or dual channel
measurements on a wide range of metallic cables. Active channels
can be compared with each other or with previously stored traces
from memory. Differential channel measurements are possible and
cross talk between channels can also be identified.
megger tDR20002Rm Dual channel tDR
MEG,TDR2000/2RM AU
Range 20km at VF =0.90. Monochrome display with backlight,
dual cursor measurement, output pulse amplitude and width
control. No blocking filter required for direct connection to
live systems up to 300Vac. 15 memory trace storage, down
loadable to PC via RS232C interface, software supplied. Ranges
50m, 100m, 200m, 400m, 1km, 2km, 4km, 8 km & 16km.
Resolution 0.1m up to 200m, 0.2m up to 400m, 0.1% of range
above 400 m. Measurement accuracy 0.1% of range. Input
impedance 120Ω. Velocity factor variable from 0.300~0.999
in steps of 0.001. Powered via rechargeable NiMH powerpack,
charger supplied.
Dynatel 2273 Bur ed cable and Fault Locator
DYN,2273 NZ
Features include ac V meter, Ω meter, cable depth meter (non
energised cables only) and multiple frequency transmitter (user
selectable). Trace path of energised and unenergised cables,
indicate cable depth and locate the position of shorted conductors
to ground using the A frame accessory. Max depth is 2.5m.
tektron x 1503c tDR cable tester
TEK,1503C AU/MY
Distance range 50,000’, resolution 0.04’ & 50, 75, 93,
125Ω output impedance. LCD display. Internal battery or mains
operation. Supplied with ethernet testing and isolation network
options.
tektron x 1503 t me Doma n Reflectometer
TEK,1503 MY
Time Domain Reflectometer for long cable fault location. Display
from 0~5,000 to 0~50,000 feet. Internal battery or mains
operation.
Rad odetect on RD4000 type 7 cable Locat on K t
RAD,RD4000TYPE7KIT AU
Includes transmitter and locator. Receiver has 640Hz, 8, 33 &
82kHz, 2 power and radio modes. 3 locating modes. Modes,
2 peak, 1 null, location arrows, simultaneous digital depth and
current readout. Transmitter T10 version, FF, 640Hz, 8, 33 &
82kHz transmission freq. LCD display for freq, power, battery and
connection readout, multimeter function, cable fault find function,
10W output, high efficiency induction mode. Signal clamp
100mmØ. Connection leads and carry bag.
Rad odetect on A Frame for RAD,RD4000 type 7 K t
RAD,AFRAME FORRD4000 AU
A-Frame accessory for RAD,RD4000Type7KIT. For sheath to
ground type fault finding.
Rad odetect on Flex sonde P pe tracer
RAD,FLEXISONDE AU
Sonde for use with RD400PXL. Flexible rod on reel 50m long
complete with 2 sondes. Small sonde transmitter is suitable
for insertion into plastic pipes of 25mmØ & 150mm min bend
radius. Can be detected at depths up to 1.5m. Larger sonde can
be detected at 5m depth and is suitable for insertion into plastic
pipes of 80mmØ & 210mm min bend radius. Sondes are battery
operated.
Rad odetect on supersonde
RAD,SUPERSONDE AU
Can be connected to the RAD,FLEXISONDE cable if required.
Detectable to 15m depth.
Rad odetect on 100mm clamp Antenna
RAD,CLAMP-ANT AU
For use with RAD,RD400PXL. Identify an individual cable out of
a bunch. Good for cable tracing. Transmitter is connected to one
end and placed around individual cables for identification. Clamp
is 100mmØ.
Rad odetect on RD400PXL P pe and cable Locator
RAD,RD400PXL AU
Can measure current in buried lines. Includes transmitter and
locator, peak and null location by audio and meter, very useful
in congested areas. Has power /radio/8kHz/33kHz modes, can
read depth to 3m. Includes direct connect lead and signal clamp
(tong) (10cm). Works with optional sondes to trace sewers and
plastic pipes.
cscope cAtXDsGV-KIt cable and P pe Locator
CSC,CATXDSGV-KIT AU/NZ
Cable location tool. Includes 33kHz generator with touch button
controls and LCD, XD receiver/ locator with 33kHz, power or radio
modes. Direct connection cable, stake and 75mm tong set. The
transmitter can operate with direct connection, tongs or induction.
The instrument will also determine cable depth, range 0.2m~3m .
It will operate with the Radiodetection 33kHz sondes.
Icc LD400 Ultrasound Leak and em ss on Detector
ICC,LD400 AU
Used to detect water and gas leaks, from ultrasonic emission.
Also used for mechanical noise location. Supplied complete
with an ultrasonic transmitter to enable leaks within containers
to be detected, e.g. vehicle bodies, fuel tanks. Aural and visual
indication. Battery operated.
Icc LD408 no se Leak Detector
ICC,LD408 MY
Used to detect water & gas leaks, etc. from ultrasonic emission.
Also may be used for mechanical noise location. Supplied
complete with an ultrasonic transmitter to enable leaks within
containers to be detected, e.g. vehicle bodies, fuel tanks. Aural &
visual indication. Battery operated.
Ultra Probe UP100Kt Ultrason c Leakage Detector
ULT,UP100KT AU/NZ
Hand held pistol type with stainless steel sensor enclosure.
Frequency reponse 20~100kHz, (centred at 28 ~42kHz), 10
segment LED bargraph (red). Sensitivity 8 precision attenuation.
Response time 300ms, operating temperature range 0~500C.
Kit includes contact stethoscope module with different wave guide
extension rods for direct for use on pipes, bearing housings,
steam traps, etc. Rubber focusing probes, head set, warble tone
generator for determining leaks in seals of empty containers, etc.
Pr mayer om kron Water Leak Detector
PRI,OMIKRON-AG AU
Water leak locating listening probe and ground microphone
system designed to locate leaks in water pipe. Supplied with
headphones and interconnection cables. Probe detects leak noise
directly at available valves hydrants, etc. High sensitivity and wide
band amplification of leak noise particularly at lower frequencies.
Microphone will detect noise reaching the ground surface.

MAGNETIC FIELD
METERS - GAUSS TESLA
mAGnetIc FIeLD meteRs - GAUss tesLA
Bell 5180 Gauss/tesla meter
BEL,5180 AU/NZ
Magnetic measuring equipment, portable gaussmeter. Built-in
software eliminates the need for complex calibration procedures.
Key features include Auto Zero, Min./Max./Peak Hold, Auto
Range and Relative Mode. Allows the user to select Gauss, Tesla
or Ampere/Meter readings. With Hall effect transverse probe.
Frequency bandwidth DC~30kHz, range up to 30kG. Analogue
output (±3V FS) and USB interface. Battery operated.
Bell 4080 eLF Gaussmeter
BEL,4080 AU
Handheld digital ELF gaussmeter. Resolution 0.1mG. Auto ranging
0.1~511mG. Probe: 3 axis technology, maintains accuracy
regardless of orientation. True RMS measurement. Typical
accuracy error: ±2%, +1 digit. Frequency response: ±5%
40~600Hz, -3dB 25/1,000Hz. Applications include detecting
magnetic field emissions from overhead ac power lines, video
display terminals, office equipment and household appliances. This
unit is not suitable for measuring field strength of “neodymium” or
“rare earth” magnets or any permanent magnets.
Bell 5080 Gauss/tesla meter
BEL,5080 AU
Portable gaussmeter complete with Hall effect transverse probe. Frequency bandwidth DC -
20kHz, ranges 300G~30kG. Max resolution 0.1G (10µT). Max and min hold. Analogue output
and RS232 interface. Battery operated.
Holaday HI-3627 magnet c F eld meter
HOL,HI-3627 AU
Three orthogonal field sensors. Dynamic range 0.2mG~20G. True RMS detection. Frequency
range 5Hz~2kHz with an in-built 30Hz high pass filter. Meets requirements of the Swedish
protocol and the IEEE P-1140 protocol.
electr cal power
Model Type Frequency (Hz) Range (G) Electric Field Output
HOL,HI-3627 Vector AC magnetic field meter 5~2,000 0.2 ~ 20
HOL,HI-3604 AC field strength meter 50~100 0.1 ~ 20,000mG 1~200,000V/meter
HMI,GM04 Digital gauss meter dc~10kHz 30 ~ 30,000
BEL,4080 Digital gauss meter 40~600 0.1mG ~ 511mG
BEL,5080 Digital gauss meter dc~20kHz 300 ~ 30,000 Analog & RS232
BEL,5180 Digital gauss meter dc~20kHz 300 ~ 30,000 Analog & USB Port
BEL,4090-20 Digital ELF gauss meter 40~400 0.1 ~ 1999mG
Holaday HI-3604 LF e & H F eld mon tor
HOL,HI-3604 AU/MY
Low frequency field meter. Designed to evaluate electric and magnetic fields associated
with 50Hz power lines. Frequency range 30~2,000Hz. Measures magnetic fields from 0.1
milligauss to 20 gauss. Measures electric fields from 1 volt/meter to 200 kilovolts/meter. LCD
display. 127 reading data memory. Meets the interim requirements of the Australian Radiation
Laboratory for normal levels of AC power exposure.
H rst Gm04 m croprocessor controlled Gaussmeter
HMI,GM04 AU
Facilities: store and recall on 0~99 samples, hold. Analogue peak
with digital storage. Auto and manual ranges. Automatic reading
conversion between different units. (Note 1mT = 10G)
Range 1: 0~to more than 3T resolution 1mT.
Range 2: 0~299.9mT resolution 100µT.
Range 3: 0~29.99mT resolution 10µT.
Range 4: 0~2.999mT resolution 2µT.
Accuracy (at 200C): ± 1%. Frequency range: dc and
15Hz~10kHz. Functions: dc, dc peak, ac RMS, ac RMS max,
& ac peak. Applications include measurement of magnetic flux
density of magnets and assemblies, electric motor air gaps and
drive actuators.
Bell tr -ax al m ll gauss magnet c F eld meter
BEL,4090-20 NZ
Handheld digital ELF gaussmeter. Resolution 0.1mG. Auto ranging, 0.1~1999mG. Resolution
0.1mG in high-sensitivity mode & 1mG resolution in low-sensitivity mode. Probe 3 axis
technology, maintains accuracy regardless of orientation. True RMS measurement. Typical
accuracy error: ±1% + 1 digit. Frequency response: ±10% 40~400Hz, -3dB, 20/2000Hz.
Applications include detecting magnetic field emissions from overhead ac power lines, video
display terminals, office equipment and household appliances.
21

22
INSULATION/CONDITION /RESISTANCE TESTERS
Model Type Voltage (V) Resistance (Ω) Current (A) Frequency
(Hz)
SEW,X3760PKIT+ Portable Appliance
Tester
SEW,EUROPA PAT Portable Appliance
Tester
MEG,CBT2 RCD Tester 6~500mA
Features
LEM,SATURN GEO EASY Soil Resistivity Tester 48ac 0~20kΩ 50mA 128 Battery,RS232
AS3760:2001 Compliant, full keyboard,
barcode scanner, RS232, Automatic
label/tag printer
AS3760:2001 Compliant, barcode scanner,
RS232
LEM,SATURN-GEO-X Soil Resistivity Tester 48ac 1mΩ~300kΩ 250mA 94~128 Battery, Stakeless measurement, earth
loop impedance,RS232
MEG,DET2/2 Diagnostic Earth Tester 50V 0.01~19.99kΩ 50mA 10.5~160
MEG,DET4TD 4 Pole Earth Tester 25 & 50V 0.01~2kΩ 2, 3 & 4 wire test
MEG,DET5/3R Soil Resistivity Tester 0.1~19,999 128 Battery
MEG,DET20C Earth Resistance Clamp 25mΩ~1550Ω 0.2~35 Battery, USB output of data
MEG,BM11D Insulation Tester 500, 1kV, 2.5kV, 5kV 10kΩ~500GΩ dc Battery
MEG,BM21 Insulation Tester 25~5000 5TΩ 2mA/kV dc Battery
FLU,1630-EARTH CLAMP Ground clamp meter 0.025Ω 0.2~30A Stakeless testing, Display hold button
MEG,BM25 Insulation Tester 500~5kV 2mA
MEG,10-01-10KV Insulation Tester 10kV 1TΩ 99µA dc Operates from main supply or rechargeable
battery
MEG,S1-552 5KVDIT Insulation Resistance 1kV~5kV 15TΩ USB, RS232
MEG,S1-1052 10KVDIT Insulation Resistance 1kV~10kV 35TΩ USB, RS232
LEM,SATURNISO Insulation Tester 50 ~ 1,000 30GΩ dc Battery
HIO,3455HVIT-5KV Insulation Tester 250, 500, 1kV, 2.5kV,
5kVdc
5TΩ 1mA dc Battery, data storage & USB interface
MEG,SK-MDP3 Distribution Profiler 4~30kV 1000Ω lightweight; advance MDP software
HVD,HVA30-DC/VLF High Voltage Insulation
DielectricsTest Set
HVD,HVA60-DC/VLF High Voltage Insulation
DielectricsTest Set
33kV, 5µF 190hm 15mA dc/VLF Four in one HV test set; VLF/DC/Jacket
Sheath/Fault Conditioning
60kV, 50mA dc/VLF
CHK,LM05 Micro-Ohm Meter 1µΩ~20Ω 10 dc Battery
CRO,D07 Micro-Ohm Meter 600µΩ~60Ω 10 dc c/w Probe/Lead Set
T&R,DSM200 Micro-Ohm Meter 200µΩ~4Ω 200/10 dc
VAL,4300B Micro-Ohm Meter 2µΩ~20kΩ 100mA~10 dc Heavy duty Kelvin leads
MEG,DLRO10 Micro-Ohm Meter 0.1mΩ~2kΩ 10 dc Alpha-numeric keypad for entering test
notes, autoranging with manual option,
realtime or from storage via RS232, large
backlit LCD
MEG,DLRO-10X Micro-Ohm Meter 0.1mΩ~2kΩ 10 dc Alpha-numeric keypad for entering test
notes, autoranging with manual option,
realtime or from storage via RS232, large
backlit LCD
MEG,DLRO200 Micro-Ohm Meter 0.1µΩ~999.9mΩ 10~200 dc Alpha-numeric keypad for entering test
notes, autoranging with manual option,
realtime or from storage via RS232, large
backlit LCD
MEG,DLRO600 Micro-Ohm Meter 0.1µΩ~999.9mΩ 10~600 dc RS232, Software
MEG,CM500 Multifunction Installation
Tester
LEM,SATURN100+ Multifunction Installation
Tester
280~1kV 0.01~499MΩ 0~250mA 16~460 RS232, Software, RCD tester, Loop
impedance, Prospective short circuit
1~400 0.01~9.99kΩ 0~1 15.3~457 Battery
BAU,DPA75 Oil Insulation Tester 0~ 75kV RMS RS232
AVO,OTS60PB Oil Insulation Tester 60kV RMS Battery, RS232
BJM,ALL-TEST4 Motor, Coil Tester 1 kV 0~20MΩ 100~2,400 Power Factor, Capacitance
3M,701 Megohm Meter 10 ~ 100 0~10GΩ ESD Surface Testing
MEG,RCDT330 Residual Current Device 0~300 10mA~1kmA 25~450 USB, Battery, IP54
PRO,ITX125VA-RCD Test Transformer 240 150mA 50

InsULAtIon/conDItIon/ResIstAnce testeRs
megger s1-552 H gh current
Insulat on Res stance tester 5kV
MEG,S1-552 5KVDIT AU
High output current 5mA for fast charging of capacitive loads.
Testing up to 5kV, mains or battery powered, digital/analogue
backlit display, variable test voltage from 50 to 5000V, automatic
IR, PI, DAR, SV and DD tests. Measures to 15TΩ, RS232 and
USB download of results.
megger s1-1052 H gh current
Insulat on Res stance tester10KV
MEG,S1-1052 10KV-DIT AU
High output current 5 mA for fast charging of capacitive loads.
Testing up to 10kV, mains or battery powered, digital/analogue
backlit display, variable test voltage from 50 to 10000V, automatic
IR, PI, DAR, SV and DD tests. Measures to 35TΩ. RS232 and
USB download of results.
megger mIt1020 D agnost c 10kV Insulat on
Res stance tester
MEG,MIT1020-10KV DIT AU
Backlit display, variable test voltage from 50~10000V, Automatic
IR, PI, DAR, SV and DD tests, measures to 35TΩ, RS232 & USB
download of results. IEEE 43-2000 recommends the use of 10kV
for motor windings rated above 12kV. Protection rating of IP54.
Mains or battery powered.
megger 10-01 10kV Insulat on tester
MEG,10-01-10KV AU
Compact, Microprocessor controlled high voltage dc Insulation
tester. Test voltage: 500V~10kV.
megger sK-mDP3 D str but on Profiler
1000Amps/35kV
MEG,SK-MDP3 AU
Records currents up to 1000A, with an additional 200A overrange.
Waveform capture and harmonic analysis up to the 32nd
order. Power factor/power and relative voltage RMS magnitude,
metal spring device secures the unit tightly in place on overhead
lines, accurate data capture via advanced MDP software,
Lightweight, durable unit housed in a weatherable urethane case.
Sturdy battery compartment with easy plug-in access for quick
data retrieval.
HV D agnost cs 30kV-15mA Dc/VLF H gh Voltage
Insulat on D electr cstest set
HVD,HVA30-DC/VLF AU/NZ
VLF (0.1Hz), DC (±), cable fault conditioning (Burning), and
sheath/jacket testing modes all included. 0.1Hz & 0.02Hz. For
solid dielectric cables such as XLPE and EPR. Fully automatic
or manual cable test sequences complying with International
Standards/Guides such as IEEE 400.2, VDE 0296, CENELEC, etc.
True symmetrical sinusoidal, load independent, output waveform
across the full load range. Real-time display of actual output
waveform. Easy to use, menu guided, large backlit user interface.
Large output load capability (up to 5µF). Automatic and integrated
load capacitance measurement with optimum frequency selection.
Storage of test results for later retrieval or download to laptop.
Short circuited protected.
HV D agnost cs 60kV-50mA Dc/VLF H gh Voltage
Insulat on D electr cs test set
HVD,HVA60-DC/VLF AU/NZ
True sine wave low frequency output. 0.1Hz & 0.02HZ. For
VLF, DC and jacket/sheath testing. Fault conditioning capability.
Test result storage capability. Short circuit protection. Complies
with CENELEC, IEEE 400.2, VDE 0296 and other international
standards. Manual or fully automatic test sequence selection.
Real-time display of actual output waveform. High voltage power
source suitable for testing electrical plant including cables: XLPE,
PE, EPR, PILC etc, capacitors, switchgear, transformers, rotating
machines, insulators and bushings.
H ok 3455 H gh Voltage Insulat on tester
HIO,3455HVIT-5KV AU
PI and DAR function to check insulation quality and step voltage
test to detect for signs of deterioration. Generates a wide range of
test voltages, from 250V to 5kV. The voltage may be chosen from
the commonly used presets of 250V, 500V, 1kV, 2.5kV & 5kV, or
set to desired level by increments or decrements of 25V or 100V.
Insulation diagnoses for automatic calculation and indication of
PI (Polarisation index) and DAR (Dielectric absorption ratio), step
voltage testing and temperature correction. Large memory stores
up to 100 manual records and a logging function for 10 data
(360 times). Stored data may be displayed on the LCD or downloaded
to a PC. The date and time of measurement also recorded.
H ok D g tal mΩ H tester Insulat on tester
HIO,3454-51-3 AU
Continuity function with 200mA and 3 range voltage selectable
250V, 500V & 1kV. Easy to read digital display, auto-discharge,
live-wire warning, safety system for high voltage measurement,
sliding cover. Back-lighting liquid crystal display for easy reading
in dark areas, checks ground wire continuity with a short circuit
current of 200mA. Capable of testing the continuity of electrical
facility grounds in accordance with IEC 60364. Measurement
range insulation resistance maximum 4000MΩ @ 1kV. Other
functions:- insulation and low resistance mode - comparator,
measurement value hold, insulation resistance mode - auto
discharge, insulation and ac voltage mode - live wire warning
(when voltage of 70V+ or -10V exists across measurement
terminals). Low resistance mode - zero adjust. All measurement
modes - battery indicators, auto power off. Maximum rated
working voltage 600Vac.
cHK Lm05 m cro-ohm meter 10A
CHK,LM05 AU/MY
Operates from internal batteries or external power supply. Max test
current 10A. Resistance range up to 20Ω with a max sensitivity
of 1µΩ. Includes power supply-charger, duplex helical test leads,
length 2m.
megger DLRo10 m cro-ohm meter
MEG,DLRO10 AU
Self contained automatic micro-ohm meter, selecting the most
suitable test current, up to 10A dc to measure resistance from
0.1mΩ~2kΩ on one of seven ranges. Instrument is built into a
strong, lightweight case that is equally at home in the field or in
the laboratory. Light enough to be worn around the neck, small
enough to be taken into areas which were previously too small
to access. DLRO10 uses a large, bright 4½ digit LED display.
Resolution: 0.1µΩ. Battery: rechargeable NiMH, typical life 1,000
test at full load.
RcD Isolat on test transformer for test ng Portable
RcD Un t
PRO,ITX125VA-RCD AU
RCD Isolation Test Transformer for Testing Portable RCD units.
Input 240V 50Hz and output 230V 125VA thermally protected
isolation transformer. This is only suitable for testing portable RCDs
and by using this isolation transformer will avoid tripping of the
whole circuit. It comes with 15Amps Australian / New Zealand
Socket. Isolation test transformer can be used to test up to
150mA trip current
crop co Do7 m cro-ohm meter complete w th
Probe/lead set
CRO,DO7 AU
Low resistance measurement for use in workshop, field or test
facilities. Rugged construction, in a sealed plastic case with lid and
carry handle. Advanced features including protection up to 415V
RMS at the measuring terminals, digital calibration and long scale
length, 6,000 count. Rechargeable batteries >1h of continuous
operation on lowest ranges, & 20h on all others. Battery charge
indicators are provided. Internal charger will boost charge to 90%
of full charge, switching automatically to a maintenance charge.
Warning LEDs illuminate when an open circuit lead condition is
detected. RS-232 output for connection to an external printer or
PC. Plug is provided for the connection of external start switch, eg.
foot switch. Supplied with batteries, mains cord and test leads. For
special lead sets we offer a variety of different styles, together with
calibration standards.
23

24
InsULAtIon/conDItIon/ResIstAnce testeRs
contInUeD
megger DLRo10X D g tal Low Res stance ohmmeter
MEG,DLRO10X AU/NZ
Automatically selects the most suitable test current, (up to 10Adc)
to measure resistance from 0.1µΩ~2kΩ on 1 of 7 ranges.
Real-time download of results and on-board storage for later
download to a PC. Automatically detects continuity in potential and
current connections. Visible warning of high voltages present at
the terminals. Visible warning of current flowing in the test sample.
Multiple operating modes including fully automatic. Alpha-numeric
keypad for entering test notes. User selectable high and low limits.
Autoranging with manual option.
megger 200A m cro-ohm DLRo200
MEG,DLRO200 AU
Digital low resistance micro-ohm meter 200A.
megger DLRo600 D g tal m cro-ohm meter- H gh current
MEG,DLRO600 AU
Measures resistance between 0.1µΩ & 1Ω at high currents. Provides test currents from
10A~600A subject to the load resistance and supply voltage. Backlit liquid crystal display
shows information needed to perform a test; all test parameters and measurement results are
displayed. Range: 0.1µΩ~999.9mW [subject to supply voltage and load resistance]. Accuracy:
voltage ±0.5%, ±0.1mV, current ±0.5%, ±0.1A. Resistance: better than µΩ~100mW. Power
supply for full output: 207~265V 50/60Hz with a load less than 7mΩ including current leads
[i.e. standard 5m 50mm² current leads only, 4mΩ load]. Reduced output: down to 100V
50/60Hz. Test current range 10A~600A unsmoothed dc in 1A steps, accuracy ±2%, ±2A.
Test Modes manual, auto, continuous. Test Time 7s NORMAL /AUTO mode. Refreshed every
2s in CONTINUOUS mode. Voltmeter input impedance >200kW. Data Transfer real time or
batch download via RS232 using AVO Download Manager. Storage Capacity 300 result sets
and memo, battery backed for 10y.
t&R Dsm200 200A m cro-ohm meter
T&R,DSM200 AU
Max 200A. Max resolution 0.1µΩ. Digital display with RS232 output. AC mains operation.
Complete with 3m leads.
Valhalla 4300B D g tal m cro-ohm meter
VAL,4300B AU
Selectable current ranges 100µA~10A. Suitable for large electrical machinery. Resistance
ranges 2mΩ~20KΩ with a max resolution of 0.1µΩ. Basic accuracy 0.03% with a 4½ digit
display. Supplied with heavy duty Kelvin leads.
megger Bm21 500V/1/2/5kV Insulat on test set
MEG,BM21 AU
Test voltages 25~5,000V in 25V steps. Insulation range to 1TΩ at 500V, 5TΩ at 5kV. AC/dc
voltage measurement 50V~1kV. Leakage current measurement. Capacitance measurement at
end of test. Automatic discharge of capacitance. In-built test timer. Insulation burn mode - short
circuit current 1mA nominal. Battery life 8h, in-built charger for charging from mains or 12V dc.
AVo/megger Bm11D Analogue/D g tal 5kV Insulat on tester
MEG,BM11D MY
Test voltages 500V, 1kV, 2.5kV and 5kV. Insulation range 10kΩ~500GΩ digital. AC/dc voltage
measurement 50V~1kV. Timer 0~60min. Automatic discharge of capacitance. Battery life 8h,
in-built charger for charging from mains or 12V dc.
megger Bm25 Insulat on tester
MEG,BM25 AU/NZ
Five kV insulation tester which is battery-powered, housed in a
rugged case and has a large, analogue/digital LCD. A built-in timer
makes both spot tests and Polarisation Index (PI) testing easier to
carry out. Pre-set standard test voltages at 500V, 1, 2.5 & 5kV
with variable test voltage in 25V steps. Displays capacitance at the
end of a test to 10µF. Performs automatic PI, Step Voltage and
Dielectric Discharge tests as well as providing an optically isolated
RS232 port for downloading results during a test. Short circuit
current: nominal 1.8mA, max 2mA. Battery life: typically 8h.
megger Bm80 Insulat on tester
MEG,BM80 NZ
Analogue/digital insulation and continuity tester. Insulation test voltages are: 50, 100, 250,
500, 1,000Vdc. Resistance resolution is 0.01 MΩ. Voltage range is 0~600Vac.
megger cm500 mult funct on Installat on tester
MEG,CM500 AU/NZ
Combines the function of several instruments. Non-tripping loop test for tests on RCD protected
circuits. RCD ramp test features actual tripping current. Functions are insulation, continuity,
loop testing, RCD tests, voltage & frequency measurement. Phase indication, outlet polarity
indication. Stores approximately 750 test results in memory for uploading to PC.
megger RcDt330 Res dual current Dev ce tester
MEG,RCDT330 AU
Tests standard, dc, selection and programmable RCDs. Ramp
testing. Auto (remote) testing. 3ph safe. Enables testing on 110V
centre tapped supplied. Performs 1/21, 1xI & 50xI tests on RCDs
rated at 10mA, 30mA, 100mA, 300mA, 500mA & 1000mA
on general and selective (time delayed) RCDs. Tough rubber
armoured case with built-in cover. Weatherproof to IP54. USB
interface for downloading test result.
Lem saturn Insulat on tester
LEM,SATURNISO AU
Test voltages 50~1,000V in steps of 10V. Max range 30GΩ. Measures AC/DC voltage to
600V, resistance to 30kΩ. Digital and analogue display. Battery operated.
megger cBt2 earth Leakage Breaker tester
MEG,CBT2 AU
Residual current device (RCD)/safety switch, circuit breaker tester. Twelve ranges from
6~500mA. Displays tripping time in ms.
megger Lt330 non-tr pp ng loop
tester,3Ph safe,1ph or ph-ph
MEG,LT330 EN-AU AU
Non-tripping loop tester. 3 phase safe, single or phase-phase loop
testing. Enables testing on 110V centre tapped supplies. Easy
Intuitive operation, tough rubber armoured case with built-in cover,
weatherproof to IP54, result storage and downloading and USB
interface.
megger LtW335 Fault Loop
Impedance tester
MEG,LTW335-FLIT AU
2 Wire Non-tripping loop tester. 50V to 440V operation, 110V
centre-tap loop testing, CATIV installation testing, AUTO start
- operation, 0.01Ω resolution. MaxZ + (R1+R2) + Download.
metrel It3017- Installat on tester for
test ng to As/nZs3000
MET,IT3017INSTALTEST AU
Multifunction installation tester with measurement functions and
Pass/Fail limits set to AS/NZS3000 Wiring Rules, and storing of
test results for printing compliance test reports. In-built Australian
measurements and Pass/Fail limits, and guarantees accountability
and traceability with storing of test results. Simply conduct the
test, press the Memory button to save the result and assign the
result to a location, then download results to PC software and
print-out compliance test reports with actual test results. Earth
Continuity & Resistance, Insulation Resistance, Polarity, Correct
Circuit Connections, Fault Loop Impedance and RCD Testing.
“Auto-Sequence Test” mode further speeds up compliance testing
and reporting.
metrel mI 2121 AUs Advanced RcD tester
MET,MI2121AUS AU
Exceeds all requirements of AS/NZS3760:2003. Stores up to
500 tests. Interface RS232 Software.
K k su tos-5051 5kV Ac/Dc H -Pot tester
KIK,TOS-5051 AU
High voltage AC/DC insulation test set. Ranges 0~2.5kV &
0~5kV. Max output ac 100mA, dc 10mA. Pass/fail comparator
included.

InsULAtIon/conDItIon/ResIstAnce testeRs
contInUeD
Fluke 1630 earth Ground clamp
FLU,1630-EARTH CLAMP AU
For commercial, industrial, and utility applications. Compact
and rugged design. Simplifies ground loop testing and enables
non-intrusive leakage current measurement. Easy to use in
small places and harsh environments, while the ‘display hold’
and the continuity testing with an audible alarm function ensures
convenience; earth ground loop testing and continuity testing can
be completed without breaking the circuit. Uses the Stakeless
testing method; eliminates the need to disconnect parallel ground
rods and find suitable locations for placing auxiliary ground
stakes. Saves time and enables users such as industrial and
utility electricians, and field service electricians and contractors,
to perform earth ground loop tests in locations where it is not
possible to use other techniques, including inside buildings or on
power pylons.
megger D g tal earth test clamp
MEG,DET20C AU
Measures ground resistance from 25mΩ~1550Ω . Measures
ground leakage current from 0.2mA~35A. Automatic self
calibration. Auto ranging. High and low alarms. Large memory.
Download to Megger Download Manager. Measures earth
resistance in installations such as buildings, pylons and RF
transmitter sites. Use for the inspection and verification of lightning
protection systems. Large jaw opening.
megger Det2/2 H gh Accuracy
configurable D agnost c earth tester
MEG,DET2/2 AU
Provides a wide resistance range from 0.010Ω to 19.99kΩ
for testing larger or more complex grounding systems and for
difficult testing environments, with ±0.5% accuracy and 0.001Ω
resolution. Microprocessor control and advanced filtering simplify
testing in environments with high levels of interference.
megger Det4 4-term nal earth/Ground Res stance testers
MEG,DET4 NZ
2, 3 and 4 point testing; ART (Attached Rod Technique) testing capability and stakeless testing
technique; Warning indicators prevent test failure; IP54 rated; Complete with leads, stakes and
rugged carry case; Simple one button operation; Calibration test certificate included.
megger Det4tD Four Pole so l
Res st v ty test ng K t
MEG,DET4TD AU
Four pole soil resistivity testing kit. IP54 rated, 2, 3 and 4 point
testing. Selectable 25V or 50V output, complete with lead and
stake kit. Simple one button operation, hardwearing carry case,
delivered with calibration certificate. With the ability to conduct
soil resistivity and 2 & 3 pole earth electrode testing offering full
flexibility.
megger Det5/3R Ground Res stance tester
MEG,DET5/3R AU
MEG,DET5 NZ
Checks resistance of electrical systems including soil resistivity. Measures resistance from
0.01~19,999Ω in 4 ranges. LCD 3½ digit display. Operating frequency 128Hz. Complete
with earth testing kit including spikes and wire.
3m model 701 m cro-ohm esD surface tester
3M,701 AU
Tester for static control surfaces, table mats, field service kits, floor coverings, etc. Test voltages
10 & 100V. Resistance range 0~100GΩ.
Baur DAP75 Insulat ng o l tester
BAU,DPA75 AU
Output voltage 0~75kV RMS. Selectable programmes to international standards. Integral
printer. RS232 interface.
AVo ots60PB transformer o l tester
AVO,OTS60PB AU
Test voltage 60kV max at 61.8Hz. Fully automatic operation. Rechargeable battery operation.
RS232C interface.
BJm All test IV PRo 2000
BJM,ALL TEST 4 AU
Tests single or polyphase ac motors, generators, transformers or
dc motors. Use to test any motor, coil or winding to determine
insulation condition between windings, windings and frame,
open circuits. Measure phase balance and angle. Impedance
(z) 5Ω~1kΩ. Inductance (L) 0.35mH~1.6H. Capacitance (C)
100mF~50nF. Power factor (Fi) 0-90O. Insulation: 0~20MΩ @
1kV. Frequency range 100, 300, 850Hz & 2.4kHz (times 2).
Lem saturn Geo easy earth tester
LEM,SATURN GEO EASY AU
Waterproof instrument (rubber protective cover IP56). Measures earth resistance, 3 or 4
pole. Soil resistivity. Measures resistance from 0~20kΩ. Display 4 digit back light 25mm
LCD. Operating frequency 128Hz. Single button user interface. Complete with earth testing kit
including 4 stakes, 3 reeled cables, clips and carry case.
Lem saturn Geo X earth/so l Res stance tester
LEM,SATURN-GEO-X AU
Automatically tests earth/soil resistance 3, 4 pole and stakeless with CT. Optimise output
frequency (manual or automatic) 0.001~300kΩ at 20 & 48Vac, frequency 94, 205, 111,
& 128Hz. Displays all measuring results for as long as desired. Programmable limits. Optical
and audible over-limit warning. Splash-proof case IP56 (outdoor application). Measurements
with current clamps: selective, stakeless. Resistance measurements with 250mA short circuit
current. Output of measured values via interface on printer or PC.
Lem saturn 100plus safety tester
LEM,SATURN100+ AU
Confirms correct operation of RCD protection, resistance of all aspects of protective earthing
systems, loop impedance, line-neutral polarity, predictive short circuit current, phase sequence
and voltage. RCD current 10mA~1A. Tripping time 1~500ms. Tripping current measurement
with intelligent ramp. Fault voltage 0.1~99.9V. Loop and earthing resistance 0.15W~10kW.
Earth electrode voltage (SEV 3569) up to 199V. Short-circuit current 1A~9.99kA. Loop/line
internal resistance RLOOP 0.07~200W. Nominal line voltages 100~435V. Battery-saving,
automatic switch-off, typical battery service-life 3,500 insulation measurements.
mult -amp met-2 clamp-on earth tester
MUL,MET-2 NZ
Clamp-on earth tester 0.01~300Ω. Measures earth resistance by using 2 clamp CTs without
disconnecting the earth conductor. Measures dc loop resistance without any influence from
other conductors.
seaward europa Advanced Portable Appl ance tester
SEW,EUROPA PAT AU
Records results, compliant with AS/NZS 3760: 2001/2003 can be printed as a certificate
using the serial/parallel adaptor. Bar-code reader included. Earth continuity output current
100mA~25A ac. Range 0.01~20Ω. Accuracy ±5% of reading ±2 digit. Insulation test range,
100kΩ~100MΩ. Test voltage, 250, 500Vdc. Resolution 0.01MΩ. Includes plug adaptor to
test, EPODs and extension leads (IEC - IEC and Australian).
seaward europa Advanced Portable
Appl ance tester system w th Pr nter & scanner
SEW,EUROPAPLUS NZ
“Automatic/manual portable appliance tester [PAT] system kit.
Includes results label/tag printer and barcode scanner. Performs
all AS/NZS3760: 2001/2003 compliant tests, including class
1 and class 2 leakage current 5mA/1mA, an earth conductor
bond test up to 25A at 3V (approx. 100W) and 250Vdc MOV
insulation resistance tests. Stores 5000 tests in internal memory
by appliance ID including: test type, detailed results, test time &
date, next test due date, site and location. Calibrated resolution
better than the required 5% of full scale across all ranges as
specified by the Standard. Full QWERTY keyboard and bar code
reader for input. Durable plastic adhesive test label/tags printed to
attach to appliances and leads includes user ID [logo optional on
request] and test barcode ID. Compatible with Seaward PATGuard
plus software package.”
trolley su table for seW,Xe3760PKIt+ sUPeRnoVA PAt tester
SEW,TROLLEY-3760PKIT AU
This trolley is specially designed for SEW,XE3760PKIT+ and very useful for Portable Appliance
Tester, Seaward XE 3760 PKIT+. This trolley comes with the following accessory and contains
four layer shelving, extension board with five socket 240V / 10 Amps, extension cable
approximately 25 meters, 2 Nos. of elastic tie rope and a plastic bin. By using this trolley
one can fit all the required instruments for Portable Appliance Testing and this will improve
performance and higher productivity.
25

26
InsULAtIon/conDItIon/ResIstAnce testeRs
contInUeD
seaward PAc 3760 Appl ance checker
SEW,PAC3760 AU
Performs the following tests in conformance to AS/NZS
3760:2000, earth bond, insulation & polarity tests, also leakage
current tests for Class I & Class II appliances and leads (leakage
current testing of appliances, which requires power to “switch”
them on, is the method required by AS/NZS3760: 2003).
Features simple pass/fail indication. Unique 3 button operation.
Class I, class II and leakage current. Automatic test sequence
senses an IEC or extension lead then performs a polarity test.
Detects that the appliance under test is switched “On”. Earth bond
test is set at 10A and is capable of fusing a poor earth. Large
LCD.
seaward supernova Xe3760+ PAt system w th
Pr nter and scanner
SEW,XE3760PKIT+ AU
Includes results label/tag printer and barcode scanner. Performs
all AS/NZS3760: 2001/2003 compliant tests, including class 1
& class 2 leakage current 5mA/1mA, an earth conductor bond
test up to 25A at 3V (approx. 100W) and 250Vdc MOV insulation
resistance tests. Stores 5,000 tests in internal memory by
appliance ID, including test type, detailed results, test time & date,
next test due date, site & location. Calibrated resolution better
than the required 5% of full scale across all ranges as specified
by the Standard. Full QWERTY keyboard, and bar code reader for
input. Durable plastic adhesive test label/tags printed to attach to
appliances and leads includes user ID (logo optional on request)
and test barcode ID, saves transcription. Compatible with Seaward
PATGuard plus software package.
seaward Protag oPtImA-300 test ng
and tagg ng system
SEW,PT-300 AU
Compact appliance and RCD testing, tag printing and record
keeping system. Comprises of the Seaward PrimeTest 300
appliance and RCD tester, ProTag Optima test tag printer and the
BCS-Blue bar code scanner. Battery powered and together the
system weighs around 2kg. Carries out all of the tests required
under AS/NZS3760 for appliances and leads, and carries out
30mA RCD tests. Also operates as a handheld data logging
device by recording any type of test, inspection or risk assessment
with user defined inspection routines and an in-built library of
measurement and engineering units for recording actual results.
Eliminates the need for a PDA or laptop for recording the results
of various inspections and risk assessments, from microwave oven
leakage and emergency lighting through to thermal surveys of
switchboards.
PRo-tAG thermal transfer Pr nter
PRO,TAG-PRINTER AU
Print durable and permanent synthetic test tags on-site directly
from your Europa XE, Europa Plus or Supernova XE appliance
safety testers. Easy - test the appliance, print the tag, peel it off
and stick it on. Accountable - the Pro-Tag systems are fool proof
and tamper evident. Test tags are generated direct from the
tester’s test results. Fast & Cheap - no more hand writing test
tags and Pro-Tag test tags are less than half the price of vinyl
tags. Accurate - tags are printed with appliance number, appliance
bar code, test date, user name and test status from the tester’s
memory. Customise - you can personalise the test tag with your
own company logo.

POWER ANALYSERS & RECORDERS
Model Type Volt
Inputs
BMI,A116
Current
Inputs
BMI,A120 3 kA
HIO,2332-20RPMS
Current (A)
(Max,RMS)
Features Output
YEW,CW140 3 500 A~700 A 400Hz, Harmonics 13th Display, FDD, RS232,
optional printer
VOL,PM3000A-NATA
LEM,ANALYST-2060 1 ph Power Demand 1 2 kA Harmonics 25th Display,RS232, IR, software
LEM,MEMOBOX300
MET,MX2040 1ph power demand 1 1CT 2 kA Display, analogue out
CHK,CK1 3ph current converter 1
CHK,CK5 3ph current converter 5
MET,MX200 Clamp on Ammeter 200 A Display
BMI,A112 CT 600
CHK,CR100 CT 100
CHK,CR500 CT 500
CHK,CT1000L CT 1Ka
CHK,CT3000L CT 1
DRA-BMI,PR150 CT 150 A Universal current clamp AC/DC
DRA-BMI,PR1500 CT 1500 A Universal current clamp AC/DC
DRA,TR2015 CT 3 kA
DRA-BMI,TR2021 CT 1-30A Instrument CT, 48Hz – 10kHz
DRA-BMI,TR2510 CT 10A ac Instrument CT, 1-10A
MET,PF-1-F Current logger 69kV RS232, software
ACR,POWERWATCH Disturbance Logger 1 Voltage disturbance recorder RS232
ALG,RET Flexible CT 3 kA
DRA-BMI,PR6035A/36 Flexible CT 6000A ac Flexible CT, 36” length
MEG,PA9PLUS Portable power analyser 4 5 6 kA Up to 63rd harmonics & THD; Sample rate
256/cycle; Current voltage simultaneously;
600~6,000 flexible CTs
HIO,2331-20RPMS Power demand 4 440 0~500 A Remote power measurement Ethernet
12Mb internal memory;
256Mb compact flash card
BMI,8800 Power Quality 4 4 CTs 400Hz, Harmonics 30th, Sampling 2MHz Chart, FDD, RS232, Viewing
software
ALG,UPM6100 Power quality/demand 4 4 20 A direct
3 kA
ALG,UPM6100-PLUS Power quality/demand 4 4 20 A direct
3 kA
Harmonics 50th, 14~500Hz
Harmonics 50th, 14~500Hz; flexible current
clamps
CHK,PM30PLUS Power quality/demand 3 4 3 kA THD and individual to 48th harmonics; Flexible
Cts/Clamp Cts
RS232 POWERview
software, 4Mb memory
CHK,PM20 Power quality/demand 3 4 1 kA/3 kA Sampling 11.4kHz, THD Display, RS232, software
CHK,PM30 Power quality/demand 3 4 1 kA/3 kA Sampling 11.4kHz; Harmonics 48th, IP56 Display, RS232, Software
CHK,PM40PQA Power quality/demand 3 4 3 kA THD and individual to 48th harmonics; Flexible
Cts/Clamp Cts
RS232, USB, 15Mb
Memory
HIO,3196-PQA Power quality/demand 3 4 5 kA Sampling 2 MHz; Harmonics 50th Display, ethernet, RS232;
Compact flash card
HIO,3197PQA Power quality/demand 3 4 5 kA Harmonics 50th Display, USB
HIO,3169-20 CLAMPONPT Power demand 3 3 5 kA Harmonics RS232C, PC card
HIO,3169-21 CLAMPONPT Power demand 3 3 Harmonics RS232, PC card
HIO,9670 PRINTER Printer
HIO,9694CT5A CT 1 5~500 A for HIO,3169 50mV
HIO,9660CT100A CT 1 100 A for HIO,3169 50mV
LEM,TOPAS1000 Power quality/demand 4 4 3kA Sampling 10MHz; Harmonics 50th RS232,Ethernet, software
REL,1600 Power quality/demand 5 5 1 kA Sampling 4MHz; Harmonics 63rd Parallel, software
PRO,MAGNUS-2.2KV Step Up Transformer 1 1 Prepare excitation curves for instrument
transformer, demagnetize CT and conduct
turn ratio test on VT
27

28
POWER ANALYSERS &
RECORDERS
Model Type Volt
Inputs
DRA-BMI,PG4400 Universal power quality/
demand
DRA-BMI,PX5 Universal power quality/
demand
DRA-BMI,PX5-400 Universal power quality/
demand
PoWeR AnALYseRs & RecoRDeRs
Current
Inputs
Dranetz Ac/Dc current clamp 3 - 150A
DRA-BMI,PR150 AU/NZ
AC/dc current clamp/probe 3 - 150A RMS, max conductor size is
52mmØ. Current clamp/probe is suitable for any of Dranetz-BMI
models DRA-BMI,PG4400, DRA-BMI,PX5, DRA-BMI,PX5-400.
Current clamp/probe is very useful for current measurement
through CT current transformer. CT Ratio can be selected on the
Dranetz-BMI above-mentioned models.
Dranetz Ac/Dc current clamp 3 - 1500A Rms
DRA-BMI,PR1500 AU/NZ
Max conductor size is 52mmØ. Current clamp is suitable for any
of Dranetz-BMI models DRA-BMI,PG4400, DRA-BMI,PX5,
DRA-BMI,PX5-400. Current clamp/probe is very useful for
current measurement through CT current transformer. CT Ratio
can be selected on the Dranetz-BMI above-mentioned models.
Dranetz-BmI Power Xplorer PX5
DRA-BMI,PX5 AU/NZ
Provides the full range of measurements include V, I, W, VA, VAR,
TPF, DPF, Demand, Energy, Harmonics & Inter-harmonics, THD,
Harmonics spectrum (V, I, W) to the 63rd, Flicker (Pst, Plt), Crest
factor, K factor, transformer de-rating etc. Min/Max/Avg values
are determined in ½ cycle RMS steps. Asset comes with ac
flexible current clamp DRA-BMI,RR3035A/24, current range
30/300/3,000A ac only. Can be extended to different ranges
of measurement both ac & dc by selecting appropriate current
clamps. High-speed transient capture (1MHz sampling rate) and
the full range of arithmetic, vector and sequence parameters
to evaluate distorted and un-balanced loads as defined in IEEE
1459. Exceeding high/low limits of any active parameter can
trigger logging. Voltage & current disturbances can be triggered
by peak value, wave-shape change & cycle-by-cycle RMS value
change. Pre-event & post-event waveform capture cycles are user
adjustable. Voltage & current channels can be cross-triggered.
Suitable for both AC/DC power quality measurements. (Universal
Power Quality Analysers). DRA-BMI,PX5 analysers can be used
for power quality measurements, current inrush (cycle-by-cycle
current logging), fault recording (cycle-by-cycle voltage logging),
long term monitoring and continuous logging at 1s intervals.
Four differential voltages and current channels can be used
independently. DRA-BMI,PX5 is Class A compliant with IEC
Standard 61000-4-30 ‘Power Quality Measurement Methods’
(also AS DR04066), AS61000-4-7 ‘Harmonic & Inter-harmonic
Measurements’ and AS61000-4-15 ‘Flicker-meter’. All data is
collected at 256 samples/cycle/channel.
Current (A)
(Max,RMS)
Features Output
4 4 3 kA/6 kA Sample rate 256/cycles; Harmonics 63rd;
Flicker, Pst, Plt
4 4 3 kA/6 kA Sampling 1Mhz transient; Harmonics 63rd;
Flicker, Pst, Plt
4 4 3 kA/6 kA Sampling 1Mhz transient; Harmonics 63rd;
Flicker, Pst, Plt
CCI,POWER-MATE 15A Demand 1 1 15A Power usage & greenhouse gas omissions/
display
MAR,PSC1424-585 3 Phase tester for motor testing
128Mb, compact flashcard
128Mb, compact flashcard
128Mb, compact flashcard
Dranetz-BmI Power Xplorer PX5-400Hz
DRA-BMI,PX5-400 AU
400Hz capability suitable for aviation and military use. Provides
the full range of measurements include V, I, W, VA, VAR, TPF,
DPF, Demand, Energy, Harmonics & Inter-harmonics, THD,
Harmonics spectrum (V, I, W) to the 63rd, Flicker (Pst, Plt), Crest
factor, K factor, transformer de-rating etc. Min/Max/Avg values
are determined in ½ cycle RMS steps. Asset comes with ac
flexible current clamp DRA-BMI,RR3035A/24, current range
30/300/3,000A ac only. Can be extended to different ranges
of measurement both ac & dc by selecting appropriate current
clamps. High-speed transient capture (1MHz sampling rate) and
the full range of arithmetic, vector and sequence parameters
to evaluate distorted and un-balanced loads as defined in IEEE
1459. Exceeding high/low limits of any active parameter can
trigger logging. Voltage & current disturbances can be triggered
by peak value, wave-shape change & cycle-by-cycle RMS value
change. Pre-event & post-event waveform capture cycles are user
adjustable. Voltage & current channels can be cross-triggered.
Suitable for both AC/DC power quality measurements. (Universal
Power Quality Analysers). DRA-BMI,PX5 analysers can be used
for power quality measurements, current inrush (cycle-by-cycle
current logging), fault recording (cycle-by-cycle voltage logging),
long term monitoring and continuous logging at 1s intervals.
Four differential voltages and current channels can be used
independently. DRA-BMI,PX5 is Class A compliant with IEC
Standard 61000-4-30 ‘Power Quality Measurement Methods’
(also AS DR04066), AS61000-4-7 ‘Harmonic & Inter-harmonic
Measurements’ and AS61000-4-15 ‘Flicker-meter’. All data is
collected at 256 samples/cycle/channel.
Dranetz current clamp 1 - 30A 48Hz~10kHz
DRA-BMI,TR2021 AU
Set of 3 current clamps 1~30A RMS, 48Hz~10kHz. Max
conductor size 0.47”. Current clamps are suitable for any of
Dranetz-BMI models. Current clamp/probe is very useful for
current management through CT current transformer. CT Ratio can
be selected on the Dranetz-BMI above-mentioned models.
Dranetz current clamp Probe 0 - 10 Amps Rms.
DRA,TR2510 NZ
Current clamp/probe 0 - 10 Amps RMS. Max conductor size
0.47” This current clamp/probe comes as a set of 3 and suitable
for any of new Dranetz-BMI Models. DRA-BMI,PG4400 / DRA-
BMI,PX5 / DRA-BMI,PX5-400. This current clamp/probe is very
useful for current measurement through CT current Transformer.
The CT Ratio can be selected on the New Dranetz-BMI above
mentioned models

PoWeR AnALYseRs & RecoRDeRs contInUeD
Dranetz-BmI Power Gu de 4400
DRA-BMI,PG4400 AU/NZ
Provides the full range of measurements include V, I, W, VA, VAR,
TPF, DPF, demand, energy, harmonics & inter-harmonics, THD,
harmonics spectrum (V, I, W) to the 63rd, flicker (Pst, Plt), crest
factor, K factor, transformer de-rating etc. Min/max/avg values
are determined in ½ cycle RMS steps. Asset comes with ac
flexible current clamp DRA-BMI,RR3035A/24, current range:-
30/300/3,000A ac only. Can be extended to different ranges
of measurement AC/DC by selecting appropriate current clamps.
Has the full range of arithmetic, vector and sequence parameters
to evaluate distorted and un-balanced loads as defined in IEEE
1459. Exceeding high/low limits of any active parameter can
trigger logging. Voltage & current disturbances can be triggered
by peak value, wave-shape change & cycle-by-cycle RMS value
change. Pre-event & post-event waveform capture cycles are user
adjustable. Voltage & current channels can be cross-triggered.
Suitable for both AC/DC power quality measurements.(Universal
Power Quality Analysers). DRA-BMI,PG4400 analysers can be
used for power quality measurements, current inrush (cycle-bycycle
current logging), fault recording (cycle-by-cycle voltage
logging), long term monitoring and continuous logging at 1s
intervals. Four differential voltages and current channels can also
be used independently. DRA-BMI,PG4400 is Class A compliant
with IEC Standard 61000-4-30 ‘Power Quality Measurement
Methods’ (also AS DR04066), AS61000-4-7 ‘Harmonic & Interharmonic
Measurements’ and AS61000-4-15 ‘Flicker-meter’. All
data is collected at 256 samples/cycle/channel.
Dranetz Flex ble current clamp 60/600/6,000A
DRA-BMI,PR6035A/36 AU
Set of 3 flexible current clamps 60/600/6,000A RMS, max
conductor size/length of clamp is 36”. Current clamps are
suitable for any of Dranetz-BMI Models. DRA-BMI,PG4400 /
DRA-BMI,PX5 / DRA-BMI,PX5-400. Current clamp/probe is very
useful for current measurement through CT current transformer.
CT Ratio can be selected on the Dranetz-BMI above-mentioned
models.
Dranetz-BmI, 128 mB Flash memory card (Industr al
Grade)
DRA-BMI,128MBFMC AU
Suitable for the following Dranetz -BMI Models:- DRA-BMI,PX5,
DRA-BMI,PX5-400, DRA-BMI,PG4400.
Dranetz commun cat ons Adapter - F bre to ethernet
w th node L nk sW
DRA-BMI,CAF-ETHERNET AU
Communications Adapter - Fibre to Ethernet with NodeLink
Software and Moxa Networking Software for the following
Dranetz-BMI Models:- DRA-BMI,PX5, DRA-BMI,PX5-400, DRA-
BMI,PG4400.
Dranetz V ew math Dr ver software (Add on)
DRA-BMI,DVMDS AU
In 4 essential areas, the Math Package will improve measurements:- Rescue Kit. Ever hooked
up a probe the wrong way? May be forgotten to check if the actual time in your instrument is
running correctly? Or could you have possibly forgotten to set the correct K-factors? The Math
-Package helps you to correct these errors, re-calculate parameters from available waveform
data, invert waveforms and much more. Improve Measurements / Reports. Calculate additional
parameters for your Multi-DAQ TASK Card, fault-recorder/inrush mode measurements, with
the math driver the following additional trends will be created for Multi-DAQ data files: V RMS,
Watts, VAR’s, VA, True PF, V thd (%fundamental), I thd (abs current) Voltage Frequency (for
internal trigg) and Net Totals V RMS, Amps, W, VAR & VA. Generate More parameters from
waveform data. Showing Displacement Power Factor (DPF) instead of K-factor. Rename inputs.
Energy ON/OFF peak calculations. Mathematical expressions and formulas can be used to
plot additional user-defined channels within both the time-plot chart and the waveform chart.
Advance analysis, watt harmonics, symmetrical components, etc.
Dranetz 646-3 D sturbance Recorder
DRA-BMI,646-3 AU
Accepts up to 3 ac line inputs 50~600V, 1 neutral to ground input 5~200V, & 1 dc voltage
input 1~100V. Monitors and records impulses, sags, surges, under and over voltages and
frequency variations on 1~3ph ac, 47~63Hz. Impulse duration 1~1,000µs.
AcR Voltage D sturbance Logger
ACR,POWERWATCH NZ
Single phase 230V disturbance logger. Plugs into a standard 230V 3pin power point. Stores
up to 4000 events such as sags, surges, outages, impulses & frequency variations. Supplied
with software & serial cable for programing, uploading and printing results.
BmI 8800 Power D sturbance Analyser
BMI,8800 AU
Eight inputs giving simultaneous voltage and current (optional probes required) monitoring of
up to 4 channels each. FDD included. Each disc stores 600 disturbances for transfer to the
internal graphics printer. Harmonics measurement option included for up to the 40th harmonic
of 50Hz. Max input voltage 600V RMS or dc. Eight extra channels included for sensor outputs,
etc. Operates from ac mains or 11~16Vdc. In-built UPS.
BmI A112 current Probe for BmI 8800
BMI,A112 AU
For BMI,4800/8800. Measures current waveforms to 600A and allows graphic representation
on BMI,4800 printout. Jaw opening 50mm. True RMS measurements for motor startup,
current surges, etc. Range can be extended to 3kA by using DRA-BMI,TR2015 in secondary
loop configuration.
BmI A116 600 Amp clamp-on Probe for 8800
BMI,A116 AU
Aperture 50mmØ. Bandwidth 3kHz.
BmI A120 3000 A clamp-on Probe for 8800
BMI,A120 AU
Aperture 63 x 160mm. Bandwidth 3kHz.
metroson cs PF-1-F overhead Profiler
MET,PF-1-F AU
Distribution line profilers for current measurement on power lines. Logs current consumption
to internal memory. Set of 3 profilers with one display module. Windows software included.
Current range 5~1000A. Resolution 1A. Accuracy 1.5% ±5A. Conductor voltage to 69kV
nominal. Sample rate 1s~10min. Memory 64k readings. Data storage modes: stop when
full or wrap around. Data retention after low battery shutdown 30d. Min conductor spacing
600mm.
H ok Remote Power measurement system 2331-20
RPms smarts te
HIO,2331-20RPMS AU
For multi-channel power recording 1ph 2 wire up to 6 circuits
or 1ph 3 wire & 3ph 3 wire up to 3 circuits. Provides via a
PC, management of measurement data to support energy and
environmental management. Modulated measurement units take
advantage of a variety of infrastructure to collect measurement
data. Use as a stand alone logger and for remote monitoring. Use
as a PC measurement logger keeps measuring and continuously
saves the data. Measurement modules comes with memory
and clock. Build a customised and remote measuring system by
utilizing existing data network. Modules for temperature, humidity,
instrumentation and pulse, power module for multiple circuits.
Large internal memory. Communication module with built-in realtime
clock tracks the data of each measurement module to the
second. Air Module for constructing SS wireless systems.
H ok Remote Power measurement system 2332-20 RPms smarts te
HIO,2332-20RPMS AU
For multi-channel power recording 1ph 2 wire up to 6 circuits or 1ph 3 wire & 3ph 3 wire
up to 3 circuits. Provides via a PC, management of measurement data to support energy
and environmental management. Modulated measurement units take advantage of a variety
of infrastructure to collect measurement data. Use as a stand alone logger and for remote
monitoring. Use as a PC measurement logger keeps measuring and continuously saves the
data. Measurement modules comes with memory and clock. Build a customised and remote
measuring system by utilizing existing data network. Modules for temperature, humidity,
instrumentation and pulse, power module for multiple circuits. Large internal memory.
Communication module with built-in real-time clock tracks the data of each measurement
module to the second. Air Module for constructing SS wireless systems.
Dranetz tR2015 clamp-on current transformer
DRA,TR2015 AU
Ranges 1, 2 & 3kA. Requires DRA-BMI,635-G5 termination.
Lem Analyst 2060 Hand-held 1 Phase clamp-on Power meter Analyser
LEM,ANALYST-2060 AU
Measure, record and log W, VA, VAR, kWh, and power factor. Current to 2kA auto-ranging ac or
dc. Peak, Crest Factor, THD, DF and frequency for voltage (4~750V) and current. Harmonics to
the 25th order. Time base is selectable from 2ms/div~50ms/div. Large backlit multi parameter
display, with oscilloscope and chart modes. Memory size: 8 screens smart save and up to
10,000 readings. Jaw opening capacity 60mmØ. Typical battery (6 x AA alkaline) life 24h
without backlight.
29

30
PoWeR AnALYseRs & RecoRDeRs contInUeD
Lem topas 1000 Power network Analyser
LEM,TOPAS1000 AU
Measures all relevant parameters in one measurement system.
Inputs (isolated) voltage 4 channels, 200mV~1kV, current 4
channels, supplied with 4 x 0~10A, 10~100A ac clamp-on
CTs and 4 x (unit powered) 0~3kA LEM-Flex current sensors.
Can be configured for 8 voltage channels. Measuring functions
RMS, V(U) voltage imbalance, positive, negative & zero phase
sequence, phasor (vector) diagrams, amps (I)a, pf, kVA, kVAr, f(Hz),
energy, on-line oscilloscope, power and multimeter, harmonics (by
power/direction, magnitude & phase), inter-harmonics, THD, flicker,
transients (100kHz~10MHz), will capture events from 0.1µs
in duration. Software configured manual or auto trigger levels,
ethernet or serial interface, memory >540Mb/HDD.
Lem memobox 300 network Performance Analyser
LEM,MEMOBOX300 AU
Weatherproof (IP65)3ph power analyzer. High accuracy to Class A IEC 61000-4-30. Suitable
for 50Hz or 60Hz systems. LEMflex flexible current probes with ranges 15, 150, 1,500 &
3,000A suitable for conductors up to 178mmØ. Voltage ranges from 115~830V on 3 or 4wire
systems. Measures V, A, kW, kVA, kVAR, kWHr, PF, Hz, crest factor, distortion power, THD,
individual harmonics of volts & current up to 50th harmonic, flicker and ripple control signal
levels. Power measurements by either 2 or 3 wattmeter method. Power supply 88~415V
either from measurement leads or separate supply. Memory size 4Mb with 5,700 sampling
intervals. Sampling intervals selectable from 1s~60min. Sample interval of 5min records for
>19Days. Linear or circular (overwrites earliest data once full) memory. Records average, 10ms
min & 10ms max in each interval. Captures motor start current spikes with corresponding
voltage-dips. Captures up to 13,000 voltage sag/surge events 10ms or longer. Weight 1.1kg.
Rel able Power systems 1600 Analyser
REL,1600 AU
Power analyser for parameter, demand, and disturbance measurement and long term
monitoring. PC required for download - no onboard display. Complete with 1kA CT’s & 5A
CT’s. V & I sampled at 8kHz, min/max values have 1 cycle response. Impulses sampled at 2 &
4MHz software selectable. Max input voltage 700V RMS. Notebook PC with Win 95 and Office
97 included.
Algodue UPm6100 - Power Qual ty
Portable Analyser
ALG,UPM6100-PLUS AU
Portable analyser to measure the electrical parameters on single-,
two- and three-phase systems, as well as on direct current
systems. Compact, rugged, user friendly, flexible and it offers a full
range of functions. Functions: wattmeter/energy meter, harmonics
analyzer, historical data logger, network anomalies recorder,
calculation of Power Factor compensation. Five languages can
be selected easily: English, German, Italian, French and Spanish.
FFT harmonic analysis up to 50th order, Sag & Swell detection,
4 MBytes removable flash card memory for data, logging, large
graphic LCD display with excellent visibility, Integrated printer.
DEDALO Software included. Application:- Power Quality Analysis,
Power System Optimization, Demand Control, Power Factor
Control, Consumption Analysis & Reporting.
Algodue UPm6100 Un Power meter 500Hz & Rogowsky 3kA opt ons
ALG,UPM6100 AU
Power meter 3kA Rogowski current transducer (flexible CTs), 14~500Hz, harmonic distortion
current and voltage 50th order. Large 4Mb memory.
Algodue Ret set of 3 Rogowsk transducer
ALG,RET
Use with the ALG,UPM6100. Ranges 300A/3kA. Powered from analyser.
H ok 3197 Power Qual ty Analyser w th 3x1000A
clamp-on cts
HIO,3197PQA AU
Monitors inrush current, voltage swell, voltage dips, transient
over-voltage and interruptions. Measure and records power and
power factor, active/reactive energy, demand, load changes (with
graph display), voltage and current. Measures impulsive voltage
quality. RMS voltage quality, voltage swell, voltage dips & voltage
interruption. Power quality, frequency, voltage, current, current
peak, active/reactive/apparent power & power factor (displaced
power factor). Three phase quality, voltage unbalance ratio, current
unbalance ratio, harmonic quality (up to 50th order). Harmonic,
voltage, current, ower, voltage/current phase angle. Total harmonic,
voltage distortion, current distortion (THD-F, THD-R).
H ok 3169-20 clamp-on Power H tester for Power
measurements
HIO,3169-20CLAMPONPT AU
Allows measurement of 1ph~3ph 4-wire circuits with a single unit.
In addition to measuring standard parameters such as voltage,
current, power, power factor, and integrated values, this unit can
simultaneously perform demand measurements required for
carrying out power management and energy-saving measures,
as well as harmonic measurements. Features PC card data
storage and comes equipped with an RS232C interface for PC
communications. Can measure the power of just a few cycles,
enabling more detailed and effective energy-saving measures.
Supplied with Hioki 9625 power measurement support software
for data analysis. Measure up to 3ph, 3 wire system (displays
voltage and current for 3 lines), up to 4 x 1ph, 2 wire systems,
5A~5kA range, PC card data storage, power recording for
individual waveforms. Simultaneous recording of demand values
and harmonics. Applications are energy maintenance/control,
energy control under ISO 14000, saving energy activities,
power consumption measurement of specific device/equipment,
harmonic analysis.
HIoKI 3169-21 clamp-on Power
H tester w th 500Amps ct’s 4nos
HIO,3169-21 CT500AMP AU
Measurement of single-phase to three-phase 4-wire circuits with
a single unit. In addition to measuring standard parameters such
as voltage, current, power, power factor, and integrated values,
can simultaneously perform demand measurements required for
carrying out power management and energy-saving measures,
as well as harmonic measurements. Features: PC card data
storage, RS-232C interface for PC communications, and supplied
with Hioki 9625 Power Measurement Support Software for data
analysis.
HIoKI 3169-21 clamp-on Power
H tester w th 1000Amps ct’s
HIO,3169-21CT1000AMP AU
Measurement of single-phase to three-phase 4-wire circuits
with a single unit. Measures standard parameters such as
voltage, current, power, power factor, and integrated values, can
simultaneously perform demand measurements required for
carrying out power management and energy-saving measures,
as well as harmonic measurements. Features: Measure up to
3-phase, 3-wire system (displays voltage and current
for three lines), Measure up to four single-phase, 2-wire
systems, 5A~1000A range, compact and light weight, power
recording for individual waveforms, simultaneous recording of
demand values and harmonics. Main application’s are Energy
Maintenance/Control, Energy Control Under ISO 14000, Saving
Energy Activities, Power Consumption Measurement of Specific
Device/Equipment, Harmonic Analysis, RS-232C interface for PC
communications, supplied with Hioki 9625 Power Measurement
Support Software for data analysis
HIoKI 3169-21 clamp-on Power H tester
HIO,3169-21 CLAMPONPT AU
Measure up to 3-phase, 3-wire system (displays voltage and current for three lines), Measure
up to four single-phase, 2-wire systems, 5A~5000A range. Compact and light weight, PC card
data storage, power recording for individual waveforms, simultaneous recording of demand
values and harmonics. Main applications: energy maintenance/control, energy Control Under
ISO 14000, saving energy activities, power consumption Measurement of specific device/
equipment and harmonic analysis. Complete with RS232C interface for PC communications.
Supplied with Hioki 9625 Power Measurement Support Software for data analysis.
H ok 3196 3 Phase Power Qual ty Analyser
HIO,3196-PQA AU
High speed (0.5µs 2MHz) field unit. Channels 4 voltage, 150~600V RMS 4 ranges (isolated),
4 current 0~5kA (3ph and neutral) RMS 2 ranges. Supplied with 4 x 5kA flexible clamp-on
CTs (length 945mm). Memory 13Mb internal, 512Mb compact flash card. Display internal high
resolution colour LCD. Records V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to
50th order) flicker IEC6100-4-15. Total energy, tariffs, max demands, transient and sub-cycle
disturbances. Software provides graphs and summaries to PC. Interfaces RS232 and 10base
ethernet.

PoWeR AnALYseRs & RecoRDeRs contInUeD
H ok 9670 thermal Pr nt ng method Pr nter, Input
Rs232c
HIO,9670 PRINTER AU
Uses stationary type, thermal printing method printer which prints
date input via RS232C from a computer or the other host system.
Convenient battery that makes easy to carry around. Provides
high-speed printing with very little noise. Provides clear printing of
16 x 16 dots and 24 x 24 dots (as well as Japanese characters
JIS Level I and II), and can print bar codes. Provides various
settings such as enlarged-character printing. Graphics can be
printed using bit images.
H ok 9694 clamp-on ct 5A
HIO,9694CT5A AU
Rated primary current 5A ac. Amplitude accuracy ±0.5% rdg. ±0.2% fs (at 45~66Hz),
66Hz~5kHz ±1% or less. Max circuit voltage 300V RMS/insulated wire. Core jaw 15mmØ.
Size: 46w × 21d × 135hmm, cord length 3m.
H ok clamp-on 100A ac ct
HIO,9660CT100A AU
Rated primary current 100A ac. Amplitude accuracy: ±0.5% rdg. ±0.2%fs (at 45~66Hz).
66Hz~5kHz ±1% or less. Max circuit voltage 300V RMS/insulated wire. Core jaw: 15mmØ.
Size: 46w x 21d x 135hmm, cord length 3m.
Fluke 43B Power Qual ty Analyser
FLU,43 NZ
Single phase power quality analyzer. Combination power quality analyzer, multimeter and
scope. Scope displays voltage and current waveforms. Measures true-RMS voltage, current
and frequency. Measures voltage, current, and power harmonics up to 51st harmonic. Total
harmonic distortion (THD). Phase angle of individual harmonics. Continuously measure volts and
amps on a cycle-by-cycle basis for up to 24h. Use cursors to read time and date of sags and
swells. Supplied with 500A current probe, software and cable.
megger PA9Plus Portable Power Qual ty
& Demand Analyser
MEG,PA9PLUS AU
Integral graphic backlit LCD and compact flash card memory.
Measures and records all voltage/current power and waveform
activity. Input voltage, 4 differential channels auto ranging between
20~300, 300~600V ac, V dc scales, accuracy ±0.25% of
reading, ±0.05% of range to the 63rd harmonic. Crest factor
voltage 3.5 limited to 1.5kV peak. Current 1.4 of full scale at
peak input. Current 5 channels resolution 0.1% fs, accuracy
±0.25% of reading, ±0.05% of range to the 63rd harmonic.
Frequency fundamental 50Hz response dc to 3.15kHz (63rd
harmonic). Resolution 0.01Hz. Sample rate 256/cycle current and
voltage simultaneously. Harmonic distortion current and voltage
to the 63rd order and THD. Power supply 90~600Vac, 50Hz,
100~600Vdc either via channel 1 or from independent IEC lead.
Memory 12Mb internal, 512Mb compact flash card. Current
sensors 4 x 600~6,000A Rogowski flexible. Report generation
software included. Set-up and download can be done through
RS232 or flash card.
ccI Power-mate 15A s ngle Phase Power/energy
measurements
CCI,POWER-MATE 15A AU
Can accurately measure and calculate power, volts, amps and
energy being used by an electrical appliance. Also measures the
greenhouse gas emission created by an appliance. Can determine
the actual running cost, how much energy the appliance used
in kilowatt-hours and how many kilograms of greenhouse
gas emissions it produced all in hourly, yearly, quarterly and
accumulated figures. Features an LED display for easy reading
and high visibility at all times. 15-amp version - to a maximum
continuous capacity of 15A, but readings are accurate to 18A
and the cable is rated to 15A. Provides a variety of measurements
including: power in watts, voltage and current. Provides the
minimum, maximum as well as instantaneous readings.
cHK Pm20 Power Qual ty Analyser/Logger
CHK,PM20 AU
Three phase, weatherproof IP65 field unit. Three voltage channels 63~440V (isolated). Four
current channels 0~3kA RMS (3ph & neutral). Supplied with 3 x 1kA clamp-on CTs (cable
capacity 50mm), 3kA for large conductors and 500A for neutrals clamp-on CTs are available.
Memory 4Mb. In-built 2 line LCD display. Records V, A, pf, f(Hz), kW, kVA, kVAr, THD, total
energy and tariffs, high speed RMS waveform capture events outside preset limits (10ms
intervals). Software provides graphs and summaries to PC. Download files while logging.
RS232 interface. PC using Win 95, 98 or NT4 O/S, is required with the CHK POWERview
software to configure this unit before operating.
cHK Gr dsense Pm30 3 Phase Powermon c Power Logger
CHK,PM30 AU/NZ
Weatherproof IP65 field unit. Channels 3 voltage, 63~440V (isolated), 4 current 0~3kA (3ph
& neutral) RMS. Supplied with 3 x 1kA clamp-on CTs (cable capacity 50mm). Clamp-on
CTs of 3kA, 1kA for large conductors and 500A & 100A for neutral conductor current
measurement are available. Memory 4Mb. In-built 2 line LCD display. Records V, A, pf, f(Hz),
kVA, kVAr, kW, harmonics, (THD and individual to 48th ). Total energy, tariffs, max demands,
transient and sub-cycle disturbances. Software provides graphs and summaries to PC.
Download files while logging via RS232 interface. PC using Win 95, 98, NT4, 2000, XP, O/S,
is required with the CHK POWERview software to configure this unit before operating.
cHK Gr dsense Pm30 Plus 3 Phase Powermon c
Logger
CHK,PM30PLUS AU
Weatherproof IP65 field unit. Channels 3 voltage, 63-440V
(isolated), 4 current 0 to 3kA (3ph & neutral) RMS. Supplied
with 3 x flexible 3kA clamp-on CTs (flexible CT length 600mm
& 190mmØ). Clamp-on CTs of 3kA, 1kA for large conductors
and 500A & 100A for neutral conductor current measurement
are available. Memory 4 Mb. Inbuilt 2 line LCD display. Records
V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, (THD and individual to
48th ). Total energy, tariffs, maximum demands, transient and
sub-cycle disturbances. Software provides graphs and summaries
to PC. Download files while logging via RS232 interface. PC
using Win 95, 98, NT4, 2000, XP, O/S, is required with the CHK
POWERview software to configure this unit before operating.
cHK Gr dsense Pm40 Power Qual ty Analyser
CHK,PM40PQA AU/NZ
Weatherproof IP65 field unit. Channels: 3V, 63-440V (isolated).
4 current 0 to 3,000A (3ph and neutral) RMS. Supplied with
4 flexible 3,000A clamp-on CTs (flexible CT length 600mm
and Diameter 190mm). (In addition, clamp-on CTs of 3,000A,
1,000A for large conductors and 500A and 100A for neutral
conductor current measurement are available.) Memory: 15 Mb.
Inbuilt Graphic 128x64 bits LCD display, 7 rows x 20 characters.
Records: V, A, pf, f(Hz), kVA, kVAr, kW, harmonics, Inter harmonics,
voltage and current imbalance (THD and individual to 48th ) and
Flicker. Total energy, tariffs, maximum demands, and transient and
sub-cycle disturbances. Included software provides graphs and
summaries to PC. Download files while logging USB interface. A
PC using Windows 95, 98, NT4, WIN2000 or XP O/S, is required
with the CHK PowerView software to configure this unit before
operating.
cHK 3 Phase converter for cts 1A Input to 200mA output
CHK,CK1 AU
Adaptor for CTs with 1A secondary outputs, this unit suits CHK,PM30/20.
external modem 56k Remote commun cat on for cHK,Pm30/PQA
CHK,MODEM-56K AU
External modem 56k for CHK PM20, CHK PM30, CHK PM30PLUS or any other power quality
analyzer. Modem gives remote access control to set-up/download any connected Instrument.
cHK 3 Phase converter for cts 5A Input to 200mA output
CHK,CK5 AU
Adaptor for CTs with 5A secondary outputs, unit suits CHK,PM30/20.
cHK cR100 clamp-on ct
CHK,CR100 AU
Jaws 43mmØ inside. Use with CHK,PM20 or PM30 for use as fourth CT to measure neutral
current. Accuracy Class 1.
cHK cR100s clamp-on ct
CHK,CR100S AU
CHK CR100s Clamp on CT 100A is suitable for all the CHK Power Quality Analysers like
CHK,PM20, PM30, PM30 PLUS and PM40.
cHK cR500 clamp-on 500 ct
CHK,CR500 AU
Jaws 43mmØ inside. Use with CHK,PM20 or PM30 for use as fourth CT to measure neutral
current. Accuracy Class 1.
cHK ct1000L Large 1kA Pr mary clamp-on ct
CHK,CT1000L AU
Large 123 x 35mm 1kA primary clamp-on CT for CHK,PM20/30.
31

32
PoWeR AnALYseRs & RecoRDeRs contInUeD
Gr dsense 3000 Amps Flex ct 600 mm
CHK,CT3000 PLUS AU
cHK ct3000L Large 3kA Pr mary clamp-on ct
CHK,CT3000L AU
Large 123 x 35mm 3kA primary clamp-on CT for
CHK,PM20/30.
metr x mX200 Ac/Dc cl p-on Power meter
MET,MX200 AU/MY
Ranges 19.99 & 199.9A. Measures voltage to 750V, frequency
to 999Hz, power 1.99 & 19.99kW, apparent power 1.99 &
19.99kVA, & pf. Recorder output via special leads (supplied) for
current range only, 5mV/A on 199.9A range. Switch in battery
compartment gives ac as well as dc output. Internal battery for
70h operation. Clamp capacity 23mmØ or 20 x 10mm bars.
metr x mX2040 Ac/Dc clamp-on meter
MET,MX2040 AU/NZ
Measures A, V, Hz, kW, kVA, kVAR, kWH, PF and resistance.
Ranges 200A & 2kA, 600V & 1kV, 20, 200kW & 2MW & kWH.
Scale length 3,000. 1 & 3ph operation. Motor rotation indication.
Peak, min, max, average, RMS, and crest factor indication. Peak
response time 1µs. Analogue output option fitted giving dynamic
signals and calculated parameters (energy, etc).
mart ndale Phase sequence & cont nu ty Ind cator
100~600V, 50/60Hz
MAR,PSCI424-585 AU
Tester may be used, on 3ph circuits, to check the presence &
sequence of the phases. Important on motor circuits as a phase
reversal will cause a motors direction to reverse. Tester will give
visual indication of loss of phase or an incorrect sequence. Tester
is supplied in 2 forms - Probe style, the connection to the tester is
via 3 insulated cables to 3 fused test probes, 1 with an insulated
crocodile clip. Plug style, a 16A, 4 pin, 3ph & earth, BS4343
plug is fitted to the tester. Use as a socket tester prior to plugging
in 3ph equipment. Testers supplied in a plastic wallet, with full
instructions. Caution, the unit should be checked for correct
operation using a known voltage before use.
Yokogawa cW140 Demand/Harmon cs Analyser
YEW,CW140 AU/NZ
Includes 4 x 500A clip on current transformers, jaws 30mmØ
inside. Current transformers are accurate at currents of

PRotectIon ReLAY testInG sYstems contInUeD
om cron cmc256-6 Advanced Protect on
Relay test set
OMI,CMC256-6 AU
Advanced 3ph dynamic automatic protection relay test system.
Current, integral 3ph current source max 140VA, 6 output
sources, resolution 500µA, suitable for most relay types, including
some high burden units. Voltage, 3ph 0~300rms. Auxiliary
dc supply, 0~264V, 0.2A. Relay monitoring trip, monitoring 6
isolated inputs, can be configured to be voltage free or 0~250V.
Contact outputs 6 isolated change-over relay contacts (software
controlled). Max 250Vac, 10A or 125Vdc 1A. Interface connector,
16 TTL digital inputs and outputs. Scope analogue inputs, 2
isolated analogue inputs ±500V peak max 12 bit resolution. Input
supply 90~260Vdc, 400Hz. Intuitive on-line help. Laptop and
Test-Universe software up to TU V 2.01 supplied with test set,
interface parallel port.
Programma sverker 760 Relay test set
PRO,SVERKER760 AU
Relay test set for 1ph protective relay equipment. Three phase
relays can be tested 1 phase at a time or by synchronising more
than one unit. Current ranges to 100A with full load current
to 250A. AC outputs to 250V & dc outputs to 300V. In-built
capacitor and resistors for current output phase shifting (3600).
In-built timer, ammeter, and voltmeter. Measures phase angle, PF,
and impedance. RS232 communications and control interface.
t&R DVs3-HP stat c Relay test system
T&R,DVS3-HP AU
Test system for testing voltage and frequency protection relays and
transducers. Tests Automatic Voltage Regulating (AVR) relays with
line drop compensation, under and over voltage relays, directional
over~current relays, df/dt (ROCOF) relays, vector surge (step
change of phase) relays and check synchronising relay. Generates
a 3ph voltage output from a 1ph supply, and may be used in
conjunction with a current source to test directional protection.
Requires 1ph 50/60Hz supply of 115V or 230V (±15%). Unit
automatically selects the correct range. Max power requirement
of the unit is 0.5kVA. DVS3-HP has 3ph star connected output
and the rating of each phase is:- voltage 0~133V phase
to neutral, current 5min on/15min off 330mA @ 133V, or
200mA continuous, phase lock 45Hz~65Hz, variable frequency
40~999.9Hz, variable phase angle ±180O. Delta loads may be
connected directly to the output or through the DVS-T VT box.
Max voltage obtainable is 133V between any phase & neutral and
266V between 2 phases (if the phase angles of the 2 phases are
set to 180O apart). DVS-T VT box may be used to double these
output voltage (Ratio 1:2).
Programma eGIL c rcu t Breaker Analyser
PRO,EGIL-CB ANALYZER AU
One main contact per phase. Three time channels are connected
together on one side. Events at parallel contacts equipped with
pre-insertion resistors are recorded and displayed simultaneously.
Two separate time channels for measurement of auxiliary contacts.
On-site hookup comes with ready-made multi-cable sets for
both main and auxiliary contacts. Coil currents are measured
automatically, presented together with other readings immediately
after testing on the display window or via the built-in printer. A
built-in sequencer (program unit) sets the instrument automatically
for the next sequential breaker operation. Intended primarily for
measuring travel (motion). Can be equipped with an optional serial
interface (RS232C) for communication with a PC and the CABA
Win Breaker Analysis Software.
HI Pot testeRs
H gh Voltage test set 30kV/50 Hz Ac H Pot tester
HIV,PFT303 AU
Rated 1kVA into resistive load, 3kVA into capacitive load. Duty
cycle at 3kVA ½ hours on 2 hours off, at 2 kVA 1 hour on 1 hour
off. For a field and repair shop HV testing applications. Tests the
integrity of items including insulating materials, isophase bus duct,
switchgears, transformers, vacuum bottles & interrupters, vacuum
switches, automatic circuit reclosers, bushings, fuses, arrestors,
circuit breakers, transformers, capacitors, motor and generator
windings.
H gh Voltage PFt503, 50kV ac test set
HIV,PFT503 AU
Rated 1kVA into resistive load, 3kVA into capacitive load. Duty
cycle at 3kVA ½h on 2h off, at 2kVA 1h on 1h off.
H gh Voltage Inc Very Low Frequency (VLF) 6022 60
kV H -pot test set
HIV,VLF6022 AU
For field testing of ac high/medium voltage cables, bushings, and
insulators. Input 230V, 50Hz, 6A peak, 2.5A average. Output
sinusoidal, 0~60kV ac peak, frequency 0.1, 0.05 & 0.02Hz.
Duty continuous. Test load capacitance 1.1µF (approx 3kms of
cable at 0.1Hz), 2.2µF (approx 9 of cable at 0.05Hz) & 5.5µF
(approx 13kms of cable at 0.02Hz). Display 0~60 peak kV.
Interconnect cable length 3m, control unit to HV transformer.
RG8/U output cable length 3m. Shorting stick braid 6m. HV tank
and control units shipped in travel cases weighing 70 & 40kg
respectively.
megger Ft6/12 Ion sat on, Leakage &
Breakdown tester
MEG,FT6/12 AU/MY
AC ranges 0~2kV, 0~6kV, dc ranges 0~4kV, 0~12kV. Output
currents 7.4mA, 8.9mA ac & 2.1mA, 2.5mA dc. Breakdown and
flashover indication by latching indicator for periods exceeding
1ms. Current threshold 100µA~1mA. Ionisation indication by
internal speaker. Meter indication of ac, dc and ac capacitive
currents. Complete with probes.
t&R kV30-40, 30kV Ac H pot test set
T&R,KV30-40 AU
0~30kV, max output 40mA with a duty cycle of 5min on & 15min
off. Max continuous current 20mA. Overload trip may be set from
4~44mA. Zero interlock and key operated safety features.
H gh Voltage test set VLF 90 Kv
HIV,VLF90 AU
Very low frequency (VLF - 90 CM) ac hipot test set with 90kVac peak output, is suitable for
testing cables up to 50kV. High load capacity enables it to test up to approx 7 miles of cable,
depending on type. Model includes a charging current and load capacitance meter, test dwell
timer, and polarity indicating lights. Output voltage & frequency,- sinusoidal 0~90kVac peak &
selectable, 0.1, 0.05,0.02Hz. Test frequency and rated loads with approximate cable lengths
are:- 0.1Hz/0.55µF 1,673m of cable, 0.05Hz/1.1µF 3,353m of cable, 0.02Hz/2.2µF
6,706m of cable. Kilovoltmeter scaled 0~100kVac peak, ammeter scaled 0~100mAac &
0~6µF load capacitance. Weight of the unit 167kgs. HV Cable output is 6m flexible, shielded
x-ray with alligator clamp, inter connect cable length 3m, shorting stick 6m lead with clip.
H gh Voltage Inc VLF 4022 40kV H -pot test set
HIV,VLF4022 AU
For field testing of ac medium voltage cables, bushings, and insulators. Consists of control
unit and HV tank. Input: 230V, 50Hz, 6A peak, 2.5A average. Output sinusoidal, 0~40kVac
peak, frequency 0.1, 0.05 & 0.02Hz. Duty continuous. Test load capacitance 1.1µF (approx
3kms of cable at 0.1Hz), 2.2µF (approx 9kms of cable at 0.05Hz) & 5.5µF (approx 13kms of
cable at 0.02Hz). Display 0~40 peak kV. Interconnect cable length 3m. RG8/U output cable
length 3m. Shorting stick braid 6m. HV tank and control in travel cases weighing 50 & 35kgs
respectively.
Danbr dge type JP30A Insulat on tester
DAN,JP30A AU/NZ
DC high voltage insulation tester. Output voltage 0~3kV, 0~10kV, 0~30kV, in 3 ranges. Max
output short circuit 2µA. Audible indication of ionisation. Current and voltage meters which may
be used to calculate resistance.
33

34
ELECTRICAL TRANSDUCERS
Model Type Input Type (V) Input Ranges Output (V)
CAT,CL-8-36 PH STICK Indoor two-pole tester 2~36kV
HIO,3293 CLAMPON-LT Clamp-on sensor 1,000A
HIO,9661-01 CCT-500A Clamp-on sensor 500A 500-mVac
HIO,9669-CCT-1000A Clamp-on sensor 1,000A 500-mVac
UNI,P75-3C HYBRID-DP Clamp-on 2VAC/DC 7,5000A/1.5V
HIO,3290CLAMPONAC/DC Clamp-on dc to 15kHz 2840A peak 1mV/A
CHK,CR100S Clamp-on 100A
LEM,CURRENT PROBE10A Clamp-on 1~10A for LEM,TOPAS
ALG,C173 High sensitivity clamp-on ammeter & earth leakage Algodue only 0.001 ~ 1,000A 1mV~1V/A
BEL,CG-120A Current clamp AC/DC current 50, 500A 0 ~ 0.5 AC/DC
UNI,P75-3C Current clamp AC/DC current 4, 7.5kA 0~2/ 0~1.5 AC/DC
HIO,3109 Current clamp AC/DC current 100, 250, 500,1kA 0~1 dc
HIO,3285 Current clamp AC/DC current 200A, 2kA, 1kHz 0~1 AC/DC, 0~1 V
JR,CT-005 ac current dc volts AC/DC current 1, 2, 5kA 0~1dc
ROB,543 Rogowski coil AC/DC current 1A ~ 2MA 0~2 ac
LEM,LEM-FLEXII Rogowski coil AC/DC current 30, 300, 3kA 0~3 ac
LG,FIC-51E True RMS transducer ac voltage 500V 0~5 dc
TR,M05 Instrument transformer ac voltage 100V, 500V RMS 0~5 ac RMS
YEW,2215 Current shunt AC/DC current 1A, 1kA 0~50mV ac
YEW,2255-01 Current transformer 10Aac 5Aac
YEW,2261-01 Med voltage transformer (3.3kV) 220, 440V,2.2, 3.3kV 0~110 ac
MOR,FDT Frequency transducer 0~20ac 50~1.6kHz 1~5 dc
CI,253/50 Frequency transducer 240 ac 45~55 Hz 0~1mA
CT,891040-110 Frequency transducer 110 ac 55~65 Hz 0~10 V dc
MEG,MML850CLAMPMETER AC clamp meter AC current 200A
eLectRIcAL tRAnsDUceRs
cAtU c-8-36 Phas ng st ck-two pole Phase
comparator for Indoor Use
CAT,CL-8-36 PH STICK AU
Detect differences in voltage between any 2 points of an
installation indicated by LED’s. Enables assessment of the residual
voltage induced by nearby live lines or circuits, and differentiates
it from the one provided directly from a high voltage source.
Features, range of voltages 2kV~36kV, high luminosity, compact
0.62m with probes dismounted, high dielectric quality insulating
material, 2 x 1.25m elements with removable probes, connected
via a high-insulation lead, max use distance 2.25m (with probe
extenders), operation testing with a checking device.
Fluke 771 4~20mA Dc Process
clamp meter
FLU,771 AU
Milliamp 4~20mADC process clamp. Measures: mA signals for
PLC and control system analog I/O, 4 to 20 mA output signals from
transmitters without breaking the loop. Best in class 0.2 % accuracy
megger mmc850 mult /s ngle core
Ac clampmeter - 200Amps
MEG,MMC850CLAMPMETER AU
Multi/Single Core AC. Clampmeter single, two or three core cable
measurement. Flat or round section cables; no need to split wires.
Measures up to 200A on single-core, 100A on multi-core cables.
Cable centralising clamp, backlit display, 50Hz and 60Hz supplies,
IEC 1010-2-032, CAT III 600V safety protection.
HIoKI 3293 cLAmP on LeAK
H testeR - 1mA to 1000A
HIO,3293 CLAMPON-LT AU
Dynamic 0.6mA~1000A range for measuring Leak to Load.
Start measuring simply by opening the clamp jaw. Flip display to a
maximum of 180 degrees to see readings at any angle. Filter out
high frequency noises for a clean signal. Slim 11mm core lets you
into measure crowded wiring conditions with ease.
HIoKI 9661 cct-500A clamp-on
sensors 500A, 500mV Ac output
HIO,9661 CCT-500A AU
500A rated, 500mV AC f.s. output, core jaw dia Ø46mmm.
Designed with a safety barrier to protect the user from being in
direct contact with live conductors and completely meet all CE
marking requirements. Basic specifications: Rated input current
500Aac, rated output current 0.5Vac, accuracy (at 45~66 Hz),
amplitude: ±0.5 % rdg ±0.2 % f.s. Full scale (f.s.) is the 3196
range value, phase: ±0.5 ° or less, frequency characteristics
66Hz~5kHz (±1 % or less from accuracy), max allowable input
continuous 550A RMS (45~66Hz), max circuit voltage 600Vac
RMS (insulated wire), core jaw Ø 46mm, dimensions, mass
77mmWx151mmxHx42mmD, 360g, cord length 3m.
H ok 9661-01 cct-500A clamp-on sensors
HIO,9661-01 CCT-500A AU
500A rated, 500mVac fs output, jaw 46mmØ. Rated input current
500Aac, rated output current 0.5Vac, accuracy (at 45~66Hz).
Amplitude ±0.5%rdg, ±0.2%f.s., fs is the 3196 range value,
phase ±0.5° or less, frequency characteristics 66Hz to 5 kHz
(±1%), max. Allowable input continuous 550A RMS (45~66Hz),
max circuit voltage 600Vac RMS (insulated wire). Dimensions
77w x 151h x 42dmm, cord 3m. Suitable for Hioki models:
3196PQA, 3197PQA, 3169-20CLAMPONPT, 2331-20RPMS,
8715-01, any data logger/scope which takes up to 1.7mVac
input.
H ok 9669-cct-1000A clamp-on sensors
HIO,9669-CCT-1000A AU
Jaw 55mmØ, 80mmx20mm busbar. Rated input current
1000Aac, rated output current 0.5Vac, accuracy (at 45~66Hz)
amplitude ±1% rdg, ±0.01% fs, fs is the 3196 range value,
phase ±1° or less, frequency characteristics 66Hz~5kHz (±1%),
max. Allowable input continuous 1000A RMS (45~66Hz), max
circuit voltage 600Vac RMS (insulated wire). Dimensions 99.5w x
188h x 42d mm, cord 3m. Suitable for Hioki models 3196PQA,
3197PQA, 3169-20CLAMPONPT, 2331-20RPMS, 8715-01,
any data logger/scope which takes up to 1.7mVac input.

eLectRIcAL tRAnsDUceRs contInUeD
Un versal techn c clamp-on Ac/Dc current Probe
4000/7500A
UNI,P75-3C HYBRID-DP AU
Ranges 7,500A/1.5V & 4,000A/2V with hybrid power fitted for
battery and external power supply, 3V operation. Safety sockets
4mm. Clamp is suitable for use with any instrument with an input
range of 2Vac or dc, and an input impedance greater than 10kΩ.
e.g. voltmeter, chart recorders, oscilloscopes, and power quality
analysers.
H ok 3290 clamp-on Ac/Dc H tester
HIO,3290CLAMPONAC/DC AU
Current Measurement at dc and from 1Hz ac~1000Hz. Current
Clamp Hioki 9693 Clamp-on AC/DC sensor ranges - 20, 200 &
2000A, jaw opening 55mm.
cHK,cR100s clamp-on ct 100A
CHK,CR100S AU
Suitable for CHK power quality analysers like CHK PM20, PM30,
PM30 Plus and PM40.
Lem current Probe 10A~1A for Lem,toPAs 1000
Power Qual ty Analyser
LEM,CURRENT PROBE10A AU
Current Probe 10A~1A suitable for LEM Topas 1000 power
quality analyser.
Algodue c173 Prec s on clamp-on ct m croamps
to 1Ka
ALG,C173 AU
High resolution clamp-on CT, for measuring differential and or
earth loop or leakage current. Compatible with Algodue UPM6001
and the later UPM6100 analyser’s fourth current channel.
Current range 0.001~1.2, 0.01~12, 0.1~120A & 1A~1.2kA.
Bandwidth 10Hz~3kHz. Max jaw opening 53mm.
Bell cG-120A current Gun (clamp-on Probe)
BEL,CG-120A AU
Clamp-on hall effect current probe. For primary 0~500A ac or dc
(two scales 0~50 & 0~500). Frequency response dc to 1kHz.
Output 0.5V full scale suitable for DMMs. Termination shielded
4mm banana plugs. Jaw opens to accept 19mmØ conductors.
Battery 9V alkaline typical life 100h.
sh maden 4~20mA to 0~1V Isolat ng Interface
SHI,20/0-1 NZ
Suitable for use with chart recorders, loggers and other devices
requiring isolation from 4~20mA process signals.
H ok 3109 Ac/Dc clamp-on current meter
HIO,3109 AU
Current meter with recorder outputs. In dc mode is a voltage
waveform. Ranges 100, 250, 500A & 1kA. Measures to 2kA
with reduced accuracy. Voltage range 10, 25, 50, 250 & 500
AC/DC. Accuracy 2.5%FSD. Recorder output 1V/FSD. Operates
for 36h from dry batteries or via external ac.
H ok 3285 Ac/Dc clamp-on meter w th
Analog output
HIO,3285 AU
Ranges 200A/2kA AC/DC. Measure volts, ranges 30, 300 &
600V AC/DC. Frequency ranges 10, 100Hz & 1kHz. Display LCD,
counts max 2,500 current, 3,750 voltage and 1,250 frequency.
Output voltage 1V for 2,000 count fs for each current range, can
select Rec RMS output, response time about 250ms rise time, fall
about 500ms. Select Mon for waveform output. 1V is produced
for 1,000 count on full scale frequency range. Output not available
for voltage measurements. Supplied with signal output cord,
4mm to BNC convertor, carry case and ac adaptor. Powered with
internal 9V battery or ac adaptor.
Land s & Gyr FIc-51e Voltage transducer
LG,FIC-51E AU
AC voltage to dc voltage transducer. Max input 500V. Output voltage 1Vdc per 100Vac input.
tech-Rentals,m05 Instrument transformer
TR,M05 AU
Permits monitoring of ac power lines with low input level instruments. Input 100~500V RMS.
Output 1~5V RMS. Distortion less than 0.5%. Bandwidth 40Hz~10kHz.
Yokogawa 2255-01 10A ~ 5A current transformer
YEW,2255-01 AU
Input 10Aac, output 5Aac, max circuit voltage 3.45kV, burden 15VA, accuracy 1% of rated
value, bus bar connectors.
Yokogawa 2215 current shunt
YEW,2215 AU/MY
50mV output, available in range of 1A~1kA.
moore FDt Frequency to Volts transducer
MOR,FDT AU
Input range 6.5~12.5kHz at up to 20V peak to peak. Output 5Vdc at 12kHz.
crompton 235/50 Frequency transducer
CI,253/50 AU
Input 240V ac, 45~55Hz, output 0~1mA.
cambr dge Frequency transducers 891040 55~65Hz 110Vac
CT,891040-110 AU
Frequency transducer for frequency from 55~65Hz with analogue voltage output 0~10Vdc.
Powered from 110Vac only.
Yokogawa 2261-01 2.2kV Potent al transformer
YEW,2261-01 AU
3.3, 2.2kV, 440 & 220V primary to 110V secondary.
Jacobs Rad o ct-005 current transducer
JR,CT-005 AU
Range 5kA, 2kA & 1kA. 1V dc output. Transformer can be split in two to accommodate cable
or bus 22 x 55mm.
Un versal techn c P75.3c dc/ac Amp clamp
UNI,P75-3C AU
Max current 7,500A dc & ac peak. Bandwidth 1KHz. Min range 1kA. Accuracy at 75A 10%
of reading. FS accuracy 2% of reading. Max bus size 122 x 54mm or 100 x 64mm. Max
cable size 83mm. Battery 9V - life 100h. Output sockets 4mm. DC current gives dc output, ac
current gives ac output, 4kA range 0.5mV per amp, 7.5kA range 0.2mV per A.
Rob nson 543 L near ac current transducers
ROB,543 AU
Wide bandwidth and very wide dynamic range. Supplied with an open ended flexible coil of 3m
length which may be wrapped around a very large conductor or power pole, etc. Frequency
range 10Hz~10kHz with 1% accuracy. Current range for 1 wrap of coil 1A~2MA at 50Hz.
Phase error < 0.04deg. Min bending radius 60mm. External insulation is required for metallic
conductor. Output voltage 2V RMS ac waveform. Also dc rectified output. In-built digital display.
Lem FLeXII 30, 300 & 3,000A transducer
LEM,LEM-FLEXII AU
Flexible wrap-around ac current transducer. Length 600mm. Ranges 30, 300A & 3kA.
Frequency response 1~20kHz. Accuracy 1%. Phase error 0.5O. Output 3Vrms @ full scale.
Requires 3 units for 3ph. Designed for multimeters and oscilloscopes (4mm banana plug or
BNC connectors) but can also be used with the VOL,PM3000A. Other instruments may be
attached providing the correct adaptor/transducer and connection is available. Operates for
100h from 2 x 9V batteries.
35

36
eLectRIcAL testeRs
Phase sequence meter 110 - 600 volts 50 / 60 Hz
KYO,PSM8031 AU
KYO,8031 MY
Phase indicator with open phase checker and phase indicator
designed to check the presence of open phase and also the
phase sequence by rotating disk and lamps. Check a wide range
of 3ph power source from 110~600V. Operational voltage
110~600Vac, time limit for continuous >500V within 5min.
Frequency response 40~200Hz(ac 110~200V), 40~400Hz
(AC 200~600V) safety standard IEC61010-1 CAT.III 600V
pollution degree 2 withstand voltage 2.2kVac for 5s. Dimensions
106L × 75W × 40Dmm, weight 350g approx. Cord 1.5m
(R: red S: white T: blue)
Beha 5774e 3 Phase sequence/Rotat on Ind cator
BEH,5774E AU
For determing the rotational direction and sequence of a 3ph
supply. Necessary to pre-determine the correct rotational direction
of 3ph motors.
K kusu PLZ1002W electron c Load
KIK,PLZ1002W AU/MY
Voltage range 3~110V. Current range 0~200A. In-built oscillator
provides for dynamic load testing by switching between two
different load levels. Load current may be remotely controlled by
voltage or resistance signals. Multiple units may be operated in
parallel. In-built digital volt/current meter. For dc inputs only.
B ddle 550005 turns Rat o test set
BID,550005 AU
Single phase (can be used on 3ph individual phase windings).
Turns ratio 0.001~129.999. Exciting current 0~1A. Accuracy
0.1%. Hand cranked operation.
AVo Penta-Plus Dmm Analyser
AVO,PENTA-PLUS-DMM AU
Multifunction meter for measuring 1 & 3ph volts ac, primary
and secondary current, true and reactive power, amplitude and
phase angle, and also frequency. Easily configured to measure
the amplitude and phase angle between any 2 current or voltage
inputs. Displayed simultaneously on a backlight graphic LCD
screen. Internal memory records up to 60 test results. Logging via
RS232C port. Parallel printer port. Voltage 0~650Vac, 9 ranges
with 0.1% resolution. Max 1kV. Current 0~100A ac in 11 ranges,
with 0.1% resolution. Phase angle 0~360O with 0.1O resolution.
Power true and reactive ±0-100kW & ±0~100kVAr. Frequency
45~65Hz. Timer 0~999.999. Line or battery operated, 3h
continuous on full charge.
H ok 3282 clamp-on H tester (V, I, Hz & t)
HIO,3282 AU
Measures True RMS, peak, min/max & hold. Ranges auto/manual,
current 30A, 300A & 1kA RMS. Voltage 300/600V (1kVmax).
Resistance 1/10kΩ. Frequency 40~100Hz & 66Hz~1kHz.
Jaw capacity 46mmØ (50mm opening). Battery life approx 1.5h
continuous.
cURRent InJectoRs
smc Pte-100-c secondary current test set
SMC,PTE-100-C AU/NZ
AC current and voltage outputs in 4 ranges 200V/5A, 40V/25A,
20V/50A & 10V/100A. Additional outputs ac voltage 0~220V
at 1A (4A 1min), dc voltage 0~350V at 0.7A (2.8A 1min),
dc voltage 0~250V at 0.25A, fixed 110V ac at 0.3A. Timer
1ms~99,999s. Additional functions include measurement of
the phase angle between the voltage and the current output tap
selected, and the measurement of the impedance of the load
connected in the current output taps.
mult -Amp ms-2 H gh current test set
MUL,MS-2 AU
Designed to test overload relays, circuit breakers and earth fault
trip devices. Input 240V 50/60Hz. Output continuously adjustable
in 4 ranges 120V/5A, 24V/25A, 6V/120A & 3V/240A. Short
term over current of several times the rated current ranges is
possible. Digital current meter has read and hold facilities for short
duration currents. Digital timer measures elapsed time between
energisation and the test device operating.
t&R PcU1-sP w th ct Rat o/Polar ty and nLU5000A
Load ng Un t
T&R,PCU1-SP NLU5000A AU
Medium powered primary current injection system. Features 5kA
maximum output current (higher overload current for 2s). Multifunction
digital timing system. Digital true RMS memory ammeter.
Solid state switching. 2000A and 5000A load units. Three range
outputs on loading units. Rugged, compact design. Optional trolley
mounting of system. Secondary injection up to 100A. Direct
reading CT ratio and polarity. May be configured to either give a
maximum current of 5000A on the 2.3V range, 2500A on the
4.6V range or 1250A on the 9.2V range.
t&R PcU1/e 2000 A Pr mary current test set
T&R,PCU1/E AU
Comprises control unit and 2kA loading unit. Control unit includes
timer, current and voltage meters, and variable output transformer.
Current output to 100A at 5V ac, 50A at 10V ac. Voltage output
to 25A at 240V ac. External loading unit output to 30A at 240V
ac. Outputs 2kA at 0~3V, 1kA at 0~6V. Two units: weigh 35 &
45kg plus cables.
t&R 200 ADm current Inject on system
T&R,200ADM AU
Single phase portable current injection system with main and
auxiliary ac, dc current and voltage outputs. Output ranges
main voltage, 10, 35, 100 & 240Vac & 240Vdc. Main current
continuous, 1~25A, intermittent up to 200A. Auxiliaries stabilised
dc isolated and protected 1.04A @ 24V~0.11A @ 220V.
Variable 300mA @ 0~130Vac. Resolution 100mV, 1mA, Phase
0.10. Timing range 0~999.999 with resolution 1ms. Metering
LCD backlit true RMS with a memory ammeter. Interface RS232.
Protection main output duty cycle and auxiliaries, electronic
thermal and fuse. Supply requirements 1ph 115~230Vac
50/60Hz 2.3kVA max.
t&R cIt/LU2000 Pr mary current Inject on test set
T&R,CIT AU
Comprises control unit and 2kA loading unit (LU). Control unit
includes timer, current and voltage meters, and variable output
transformer. External loading unit output 0~2kA, duty 5min on
15min off at 6V ac, continuous 0~1kA at 3V ac. Two units weight
35 & 45kg plus 2 quad 70mm2 cable sets each 3m long.
Control unit connects to LU with supplied interface cable.
t&R 200A-3PH/eD 3 Phase current Inject on tester
T&R,200A3PHEDIT AU
0~200A/phase output capacity. Power supply 4 wire 5A/phase
3ph 240/415V. Typically 10A 5 pin 3 phase socket outlet HPM.

POWER LINE
CONDITIONER/UPS
PoWeR LIne conDItIoneR/UPs
sola 66-102-8 2kVA electron c Power cond t oner 2kVA
SB,66-102-8 AU
Input voltage 240V +15% & -25%. Efficiency 94%. Distortion 0.5%.
sola 210-26-725 2.5kVA Power cond t oner
SB,210-26-725 AU
Input range 240V ±40% for +5% & -8% regulation. Max distortion on linear loads 3%, on
typical computer loads 5%. Efficiency 90%.
sola 0601-2000A 2kVA on-l ne UPs
SB,0610-2000A AU
SB,610-2000VA NZ
Run time 10min or 25min at half load. Novell/RS232 communications interface included
providing relay contacts for mains failure and low battery, input for remote shut down, and
RS232 send/receive, all via a DB9 connector.
sola 625 Battery Pack
SB,625-BATT NZ
sola 625-3000VA on-l ne UPs
SB,625-3000VA NZ
Output regulation is ±3%, run time at full load is 8min or 20min at half load. 125% overload
capacity for 10s.
POWER
TRANSFORMERS
Model Type Capacity (VA)
SB,66-102-8 Conditioner 2,000
SB,210-26-725 Conditioner 2,500
SB,0610-2000A UPS 2,000
SB,625-3000VA UPS 3,000
EAT,9120-2KVA UPS 2,000
CHL,5000 UPS 5,000
CHL,ACTIVE3000 UPS 3,000
UPS,IH3000 UPS 3,000
UPS,BATTERY BANK-7AH UPS 3,000
PoWeR tRAnsFoRmeRs
eaton corp Powerware 9120 2kVA onl ne UPs
EAT,9120-2KVA NZ
The double conversion online PW9120 with its wide input voltage
is capable of working with mains power in most conditions without
discharging batteries. Capacity 2kVA 12min IEC 10 A 5 Aust 10A
215 x 470 x 365 mm.
D mmer Dot Var able Ac Voltage Auto transformer 3 Phase 23~28A
VAR,D-283-OB AU
Manual operated air cooled; Input 400/415V, 50Hz. Output 0~415/470V. 23-28A. Total
Weight 95kgs.
Ferguson 115-1,000 240V 1kW transformer
FER,115-1000 AU
240~115Vac, 1kVA stepdown transformer.
chlor de Powerlan 5kVA UPs
CHL,5000 AU
Sinewave output. Dual PC interfaces. Typical run time 10min. Weight 120kg. Vigilant 7 network
interfacing software included.
chlor de Act ve 3kVA UPs
CHL,ACTIVE3000 AU
Double conversion sinewave output. Dual PC interfaces. Typical run time 20min. Input (nominal)
2220/230/240V ac 1ph + N. Output 220/230/240V ac 1ph + N ±3%. Efficiency >90%.
Dimensions 200w x 875d x 350hmm. Weight 81kg. MopUPS Professional software for
system monitoring and shutdown included. USB port & RS232 communication port for UPS
monitoring and management.
Upson c Power 3kVA smart on-L ne UPs
w th 10 m n Run t me Full Load
UPS,IH3000 AU
Industrial isolation double conversion “True On Line” UPS System. 3kVA, 240V, 10 min Run
Time at Full Load. Required 15A socket.
Upson c Battery Bank - 7AH su table for UPs,IH3000
3kVA UPs
UPS,BATTERY BANK-7AH AU
Battery Pack 32 x 12V7Ah suitable for UPS,IH3000 3kVA UPS unit. Fitted with in-built charger
card IH 3KVA 500W 120V DC. Back-up run time 2-3h at 1000W Load.
H ok Battery H tester
HIO,3551BATTERYTEST AU
Takes on-the-spot measurements of the internal resistance,
voltage and temperature of lead-acid batteries, principally for UPS
and similar applications, without needing to shut off the battery.
Instantaneous results, on a three-rank scale of Pass, Warning, or
Fail, using a composite decision based on the internal resistance
and the voltage. Resolution of 1µΩ, necessary for high capacity
batteries (of at least 500Ah). Includes Hioki 9460 clip type
temperature leads.
Model Type Phases VA Output (VAC)
VAR,D-283-OB Auto Transformer 3 16,000 0~470
FER,115-1000 Power Transformer 1 1,000 115
FER,115-2000 Power Transformer 1 2,000 115
VAR,3000 3,000
VAR,6500-3 3 8A/Ph 0~470 Ph-Ph
Ferguson 115-2000 2kVA 240/115V transformer
FER,115-2000 AU
240~115Vac, 1kVA stepdown transformer.
Var ac 3kVA 0~260Vac output
VAR,3000 MY
Var ac 6500-3 3ph 6.5kVA
VAR,6500-3 AU
Variac 3ph 6.5kVA. 0~470Vac output for 415Vac input, max current 8A/ph.
37

38
AC SOURCES/
INVERTERS/
GENERATORS
Model Type VA Output (VAC)
ELG,501 AC Power Amp 500 0~270
CHR,61501 PAC PS AC Power Source 500 300
RED,DA3179 Motor generator 12 V 400 240
PC,300I-24 Power Inverter 24 V 300 240
HON,EU3000IS Petrol Generator 3000 240
YAM,EF3KISE Petrol Generator/Inverter Set 3000 240
TRA,230-115 Transformer 1000 115
Ac soURces/ InVeRteRs/GeneRAtoRs
elgar 501 Ac Power source
ELG,501 AU
AC power amplifier. Operates from 240V 1ph ac. Output ranges
on tapped transformer 0~65, 0~130, 0~260Vac. Output
power 500VA. Alternative oscillators available for 10Hz~10kHz
operation. Amplifier output rated over 45Hz~5kHz. Two units may
be connected for 1kVA output. Three units may be used with a
single 403 oscillator to give a 3ph output at 1.5kVA.
chroma 61501 Programmable Ac
Power source
CHR,61501 PAC-PS AU
Power: 500VA. Voltage: 0-150V/0-300V/AUTO. Compact size
and weight attributable to advance PWM technology. AC, DC,
AC+DC output mode. Programmable output impedance for
IEC 61000-3-3. IEC 61000-4-11 voltage dips and variation
simulation. Harmonics, inter-harmonics waveform synthesizer
for IEC 61000-4-13 testing. Power line disturbance simulation
capability. Programmable voltage, current limit. Comprehensive
measurement capability, including current harmonics. High output
current crest factor, ideal for inrush current testing. Turn on, turn off
phase angle control. TTL signal which indicates output transient.
Software for IEC regulation test. Analog programmable interface.
Optional GPIB and RS232 interface.
Red l ne DA3179 12/240V dc-ac Inverter
RED,DA3179 MY
Motor generator. 12Vdc to 240Vac sinewave output. Continuous
rating 400W. Intermittent use 600W. Lower duty cycle 50% on,
25% off, 1.2kW, auto starts on load. Overload protected. Weight
12kg. Overall frequency regulation 47~53Hz.
Power Inverter 300W 24Vdc output 240V
PC,300I-24 AU
Sinewave inverter. Output Power continuous (peak) 300W (1kW).
Frequency 50Hz ±1%.
Honda eU3000 s Generator 240V/3kVA
Inverter output
HON,EU3000IS AU
3kVA /240Vac generator inverter type. Working on Petrol.
Yamaha eF3000 se 3kVA Petrol Generator/Inverter
YAM,EF3KISE AU
Output ac 3kVA 2.8kW @ 240V 50Hz, max harmonic distortion
2.5% (mains supply can exceed 5%), 12Vdc @ 14A. Sound
attenuated enclosure (level 57dB(A) @ 7m) with 4 wheels.
Dimensions 680w x 445d x 555hmm. Dry weight 70kg. Engine
4 stroke, air cooled ohv, fuel tank 13L (unleaded), duration at
25% load 20h with auto throttle on. Electric and pull start.
230 to 115 VAc transformer 1 kVA
TRA,230-115 NZ
Maximum power is 1kW. USA power socket.

DATA LOGGERS
Data Loggers Analogue in
(Ch)
DAtA LoGGeRs
Digital in
(Ch)
Digital out
(Ch)
DC
Supply
H ok 3632-20 temperature Logger w th Internal
sensor only
HIO,3632-20 AU
Temperature logger (1 channel) includes 1 x RS232C & 1 x USB
communication base, utility software, RS232C and USB interface
cables. Temperature range -20~70ºC. Accuracy
-20~-0.1ºC ±1.0ºC. 0~35ºC ±0.5ºC, 35.1~70ºC ±1.0ºC.
Internal thermistor sensor, water resilience IP67. Built in LCD.
H ok 3641-20 temperature/Hum d ty Logger w th
Rs-232ºc & UsB
HIO,3641-20 AU/MY
Includes 1 x RS232C & 1 x USB communication base, utility
software, RS232C & USB interface cables. Temperature range
-40~85ºC, humidity range 0%~100%RH. Accuracy temperature
-40~-0.1ºC ±1, 0~35ºC ±0.5, 35.1~70ºC ±1 & 70.1~85ºC
±2. Humidity typical between ±5~±10%RH depends on
temperature and humidity range.
Voltage Ranges RTD Strain
Gauge
general ndustr al
TC Comms Memory Sample
Rate (Hz)
HIO,3632-20 1 1 Yes
HIO,3641-20 1
TES,177-H1 4 48000 0.5
TES,177-T4 4 48000 0.5
FOU,DAQPRO-2 8 0~50mV, 0~10V Yes No Yes, J, K USB 512kB 0~10kHz No
FOU,MICROLOG-KIT
Flashcard
MB
DE,DT605 10 (30 unbal) 5 5 Yes 25mV~100V Yes Yes Yes RS232 13.65kB 1 SRAM 1
DE,DT605-3 10 (30 unbal) 5 5 Yes 25mV~100V Yes Yes Yes RS232 166.538kB 1 SRAM 1
DE,DT800 12 (42 unbal) 16 8 Yes 10mV~10V Yes Yes Yes 10BaseT/
RS232
DE,DT800-4PRO 12 (42 unbal) 16 8 Yes 10mV~10V Yes Yes Yes 10BaseT/
RS232
64MB 100kHz 64
64MB 100kHz 64
HIO,8421-01 16 Yes 100mV~60V Yes No Yes LAN 8Mb 256
HIO,8421-51 16 Yes 100mV~60V Yes No Yes LAN 8Mb 256
YEW,MV200 20 Yes Yes Yes
YEW,DA100-40CH 40 Yes 20mV~50V Yes Yes RS232 0.5
H ok 3641-20-K t of 8 temperature & Hum d ty
Loggers
HIO,3641-20-KIT AU
Kit of 8 x temperature and humidity loggers. Includes 1 x RS232C
and 1 x USB communication base, utility software, RS232C and
USB interface cables. Temperature range -40ºC~85ºC, humidity
range 0.0%RH to 100% RH. Accuracy: Temperature -40~-0.1ºC
± 1.0ºC , 0.0~35ºC ± 0.5ºC, 35.1~70ºC ± 1ºC, 70.1~85ºC
± 2ºC. Humidity typical between ±5 to ±10% depends on
temperature and humidity range. 8000 data points X 2 channels,
recording interval 2,5,10,15,20,30 sec,1,2,5,10,15 ,20,30,60
min.
Datataker Dt5LtP-R one channel Logger
DE,DT5LTP-R AU
One channel platinum resistance probe temperature logger.
Range -50~50ºC up to 0.1 resolution, -50~250ºC up to 0.3
resolution. Memory store up to 4,048 readings. External probe.
Lithium battery.
39

40
DAtA LoGGeRs contInUeD
Datataker 1mb PcmcIA card for Dt ser es 2
DE,DT-MEM1024 AU
Memory card for DataTaker DT600 series loggers. Capacity 1.024Mb.
Datataker Dt500/600 expans on module
DE,CEM-AD AU
Channel expansion module for DT500 & DT600 data loggers. Adds 10 differential analogue
and 20 digital state inputs. Also adds 10 digital outputs.
escort three channel Low temperature Logger
ESC,3EXT-LO/SS NZ
Range -40~40ºC, accuracy 0.5ºC, resolution 0.3ºC. Supplied with 3 temperature sensors and
software.
escort Four channel temperature Logger
ESC,4 EXT NZ
Range -20~60ºC. Resolution 0.3ºC. Accuracy 0.5ºC. Stores 30,000 readings. Supplied with
software, interface and 3m long temperature sensors.
escort temperature Hum d ty Logger set of 5
ESC,HUM/T-KIT AU
ESC,HUM-KIT NZ
Includes software and communication base for down loading of data from loggers to a PC. Data
presented in table or graph form.
escort Analogue Adaptor
ESC,ANALOGUE NZ
Analogue adaptor for dc voltage and dc current inputs. Inputs: 0~20mA, 0~2 VDC, 0~10Vdc.
escort pH Adaptor
ESC,PH-ADAPTOR NZ
Glass electrode type pH adaptor probe. Range 0~14pH, resolution 0.015pH. User calibration
via offset and slope adjustment screws. Supplied with 10m temperature compensation
probe. WARNING!! Do not use the electrode in perchlorate, silver, sulphide or any hydrofluoric
solutions containing more than 1M acid or base, or at temperatures more than 50ºC. Use at
high temperatures may shorten the life of the electrode.
testo 177-H1 Logger w th D splay
TES,177-H1 MY
Parameters: Humidity/Temp/Dew Point. Sensors: Humidity Sensor/NTC(internal). No of
Channels: 4 CH. Measuring Range: 0~100%RH & -20~+70 celcius(internal). Memory:
48,000 readings.
testo 177-t4 Logger w th D splay
TES,177-T4 MY
Parameters: Temperature(C/F). Sensors: Thermocouple Type-K. No of Channels: 4
CH(external). Measuring Range: -100~+1000 celcius(external). Memory: 48,000 readings
Four er DAQPRo8 Batter operated hand held 8 channel Data Logger
FOU,DAQPRO-2 AU
Portable, hand held, battery operated 8 channel data logger. 16-bit resolution, built in
graphic LCD, for setting up, graphical display of logged data. PC communications via USB
interface. Signal inputs 0-24mA, 0-50mV, 0-10V. Temperature input via NTC 10kΩ, 100kΩ,
range -25~150ºC, PT100 range -200~400ºC, T/C ranges J type, -300~1500ºC, K type
-250~1100ºC, T type -200~400ºC. Frequency input one channel only, 20~4000Hz,
sensitivity 20mV, pulse counter one input 0~65000 counts. Memory capacity 512KB,
sampling rates from 1S/Hr to 4,000S/sec. Supplied with analysis and setting up software.
Four er m crolog temp/Hum Logger K t w th W reless cradles
FOU,MICROLOG-KIT AU
Set of 5 temperature and humidity loggers mounted in RF transmitter cradles, one receiver
for PC. Transmission range up to 300m or RS232C & USB interface also included if direct
connection to PC for down loading required. Temperature range -30~50ºC, accuracy ±1O,
0~100%RH accuracy ±3%RH, 2 digit LCD, memory capacity 16,000 data points between
2 channels. User defined sampling rate from 10s~2h. MicroLog Plus management control
software included to control and monitor all the loggers remotely on PC within transmission
range.
Datataker Dt605 Data Logger
DE,DT605 NZ
Input capacity 100V. LCD display enabling use as a measuring instrument if preprogrammed
for channel parameters. Ten differential or 30 single ended channels. Channels/sec 25. Digital
inputs 4TTL/CMOS. Three counter channels up to 1MHz. Up to 120 alarms with 1 digital
I/O and 3 front panel LED’s. Internal memory up to 11,000 readings. Optional memory card
to 170,000 readings. RS232C data communications port and RS485 port for networking
up to 32 loggers. Maths processing included. Inputs voltage 25mV~2.5Vdc & 100Vdc.
Max sensitivity 2µV. Current 0.25~25mA. Current loop 4~20 mA. Resistance up to 7kΩ.
Thermocouples B, C, D, E, G, J, K, N, R, S and T from -250~1,800ºC. Thermistors and RTD’s.
Strain gauges. Supplied with Determinal and Delogger software. Operates from internal battery,
external battery or ac mains.
Data taker Dt605-3 ser es 3 Data Logger
DE,DT605-3 AU
Input capacity 100V and built in SRAM Card Slot. LCD display
enabling use as a measuring instrument if pre-programmed for
channel parameters. Ten differential or 30 single ended channels.
Channels/sec 25. Digital inputs 4TTL/CMOS. Three counter
channels up to 1MHz. Up to 120 alarms with 1 digital I/O and
3 front panel LED’s. Internal memory up to 166,530 readings.
Optional 1Mb memory card to 343,980 readings. RS232C data
communications port and RS485 port for networking up to 32
loggers. Maths processing included. Inputs V 25mV~2.5Vdc &
100Vdc. Max sensitivity 2µV. Current 0.25~25mA. Current loop
4~20mA. Resistance up to 7kΩ. Thermocouples B, C, D, E, G,
J, K, N, R, S and T from -250~1,800ºC. Thermistors and RTD’s.
Strain gauges. Supplied with Determinal and Delogger software.
Operates from internal battery, external battery or ac mains.
Datataker Dt800 Data Logger
DE,DT800 AU
Universal input channels 12 balanced or 42 unbalanced analog channels. Eight bi-directional
digital channels & 8 digital input channels. Solid state multiplexer protected to ±40V. Max in/out
voltage ±12V. Serial sensor channel can be used with GPS systems. Measures V, 4~20mA,
strain, TC, RTD etc. Sampling rate 200Hz up to 100kHz in burst mode. Instrument has RS232,
RS422, USB, Ethernet (10baseT) & PC card modem communications. Plugable 64Mb memory
card stores up to 300,000 (compressed) readings per Mb. Instrument stores 600,000
(compressed) readings in internal memory. Total memory capacity 10.2Mb (compressed).
Datataker Dt800 Data Logger w th Delogger 4Pro &
trans t case
DE,DT800-4PRO AU
Universal input channels 12 balanced or 42 unbalanced analog
channels. Eight bi-directional digital channels & 8 digital input
channels. Solid state multiplexer protected to ±40V. Max in/out
voltage ±12V. Serial sensor channel can be used with GPS
systems. Measures V, 4~20mA, strain, TC, RTD etc. Sampling
rate 200Hz up to 100kHz in burst mode. Instrument has
RS232, RS422, USB, ethernet (10baseT) and PC card modem
communications. Plugable 64Mb memory card stores up to
300,000 (compressed) readings per Mb. Instrument stores
600,000 (compressed) readings in internal memory. Total
memory capacity 10.2Mb (compressed). Supplied with Delogger
4Pro & IP67 PE-800 portable enclosure with mounting frame.
H ok 8421-01 16 channel Data Logger w th colour D splay
HIO,8421-01 AU
Sixteen analogue, 4 pulse input channels data logger with colour display, PCMCIA card slot,
LAN interface built in, TCP/IP communication supports real time PC logging, FTP, SMTP
and HTTP. Signal inputs 100mVdc, 1Vdc, 10Vdc, 60Vdc, 1~5Vdc fs. Thermocouples K,E,
J, T, N, W (WRe5~26) R, S, B, -100~100ºC, -200~500ºC, -200~2,000ºC, RTD Pt100
-200~800ºC. Pulse input, accumulation 50,000 counts fs, 500,000 counts fs, 5M counts
fs, 100M counts fs, 2,500M counts fs. Rotation 5,000/n (r/s) fs. Recording interval is
selectable from 100, 200, 500ms, 1, 2, 5, 10, 20, 30s, 1, 2 & 5min. Max sampling rate is
dependent upon type of input signal. Internal Memory 8Mb, 256Mb Flashcard, 9334 logger
communicator software, 9642 LAN cable, 9641 pulse signal input cable all supplied.
H ok 8421-51 16 channel Data Logger w th colour D splay
HIO,8421-51 AU
Sixteen Analogue, 4 pulse input channels data logger with colour display, PCMCIA card slot,
LAN interface built in, TCP/IP communication supports real time PC logging, FTP, SMTP and
HTTP. Signal inputs- 100 mVdc, 1Vdc, 10 Vdc, 60Vdc, 1-5Vdc f.s. Thermocouples K,E,
J, T, N, W (WRe5-26) R, S, B, -100~100ºC, -200~500ºC, -200~2000ºC, RTD Pt100
-200~800ºC. Pulse input, accumulation 50,000C f.s, 500,000C f.s, 5MC f.s, 100MC f.s,
2,500MC f.s. Rotation 5,000/n (r/s) f.s. Recording interval selectable from 100ms, 200ms,
500ms, 1s, 2s, 5s, 10s, 20s, 30s, 1min, 2min, 5min. Max sampling rate is dependent upon
type of input signal. Internal Memory 16MW, 512MB PCMCIA FLASH card, 9334 Logger
Communicator software, 9642 LAN cable, 9641 pulse signal input cable all supplied. Improved
common mode rejection- 100dB or better when 50/60Hz, 140dB or better when 50Hz,
using ch1 to ch16, interval 5s, digital filter 50Hz selected. Faster sampling when using Pt100,
improved temperature characteristics.
Yokogawa mV200 twenty channel Logger
YEW,MV200 NZ
Twenty channel voltage, RTD and thermocouple logger. Color LCD display 10.4” TFT,
removable PCMCIA ATA flash memory card. Supports data collection over ethernet networks.
Supplied with RJ-45 cable and standard software.
Yokogawa Data Logger for Pc Acqu s t on
YEW,DA100-40CH AU
PC based datalogger with dc supply. Channels 40, 50V max input 0.05% basic accuracy.
Accepts RTD and TC inputs. Must be used in conjunction with a PC includes analysis software.
Scan rate 2s.

InstRUmentAtIon AmPLIFIeRs
V shay 2100 e ght channel Instrument Ampl fier
VIS,2100 AU
Eight channel signal conditioner/amplifier system comprising 4 dual amplifiers with power
supply, digital output display and rack frame. Accepts low level signals and conditions and
amplifies them to drive recorders. Bridge balancing for quarter (120 & 350Ω), half & full bridge
(50~1kΩ). Quarter bridge dummy resistors provided. Gain 100~2100. Bandwidth dc ~5kHz
at 0.5dB, 13kHz at 3dB. Output ±10V @ 30mA, 50mA into 150Ω, 100 mA into 15Ω. Type
2130 digital readout can be switched to each output in turn and also to an external source.
Ranges ±1,999mV & 19,999mV.
MEMORY RECORDERS
memoRY RecoRDeRs
Analogue in
(channels)
Digital in
(channels)
Yokogawa oRP1200 8 channel memory Recorders
YEW,ORP1200 AU/MY
In-built waveform display. Input ranges 100mV~500V. Max input
voltage is 500V peak or 350V rms ac. Memory 32k per channel,
may be combined for 2 channel 128k operation. Memory may
be divided into 16 blocks of 2k. 128k memory at 1kHz sampling
(20 points of 50Hz cycle) gives 128s storage. Real time recording
10mm/hr~100mm/s. Real time recorder with memory trigger
facility. 4 triggers including high, low, rise, fall, with and/or facility.
X-Y operation with up to 4 channels. Memory card facility for
storing memory dumps and setups. Memory card not included.
Yokogawa oRm1200 8 channel memory Recorders
YEW,ORM1200 AU
Similar to YEW,ORP1200 except it has 128K RAM per channel
(ie. 512K when used as
a 2 channel recorder) includes FDD.
Yokogawa oRm1300 16 Analogue channel memory
Recorders
YEW,ORM1300 AU
Similar to YEW,ORM1200 except it has 16 analog channels rather
than 8.
Yokogawa DL708 8 channel Recorder/D g tal scope
YEW,DL708E AU/MY
Eight channels 10M/s sampling 10 bit 8M word of memory,
1.2Gb HDD (100k/s sampling continuously to disk). In-built
printer, FDD, RS232, GPIB and VGA. Input ranges 5mV/
div~200V/div . 800V isolated input capability (using x10 probes).
Input filters, FFT, color display, measurement of 26 waveform
parameters. Simple and advanced trigger including a window
trigger.
HIoKI 8826 32 channel memory
Recorder w th all Isolated Inputs
HIO,8826-32CRECORDER AU
32 channel recorder with all isolated inputs. Simultaneous
sampling, display and recording of all 32 analog and 32 logic
channels. Large capacity memory of max. 16M word Memory
expandable four times (option). High resolution of 12-bit, 1M
sampling/second. B4 size (paper width 264mm) wide printer.
High-visibility waveforms displayed on a 10.4” color TFT liquid
crystal display.
Chart Paper (mm) Chart Speed (mm/s) FDD Voltage Ranges Memory per ch RS232 Sample Rate
YEW,ORP1200 8 200 100 100mV ~500V 3k 100kHz
YEW,ORM1200 8 200 100 Yes 100mV ~500V 128k 100kHz
YEW,ORM1300 16 200 100 Yes 100mV ~500V 128k 100kHz
YEW,DL708E 8 100 Yes 50mV ~800V 1 M Yes 10MHz
HIO,8810 4 110 8 kB
HIO,8811 4 110 8 kB
HIO,8826-32 32 32 264 25 Yes ~60V 1M 1MHz
HIO,8835 4 16 100 9 Yes 100mV ~400V 100kW No 1MHz
HIO,8835-01 4 16 100 9 Yes 100mV ~400V 1Megaword No 1MHz
HIO,8841 8 16 200 9 Yes 100mV ~400V 1M No 1MHz
HIO,8842 16 16 200 9 Yes 100mV ~400V 2M No 1MHz
HIO,8860 8 16 200 20 No No Var
H ok 8860 8 channel H gh speed memory Recorder
HIO,8860 AU
High speed memory recorder, 20MS/s sampling rate, 8 analog
channels, 16 logic channels, built in printer. 512MW or direct
access memory, 60GB hard drive built-in, PC card type II slot up
to 4GB ATA flash card (optional) USB, LAN interface and large
colour screen.
H ok 9725 memory V ewer software
HIO,9725 AU
Data processing software for Hioki 8860 High Speed Memory
Recorder. Functions: file loading, maximum loadable data size
2GW file saving, measurement of data binary, partial saving
between A/B cursors is possible. Screen images BMP and PNG,
calculation results. Display of saved binary files, displayable
channels per sheet analog 32, logic 16 channels. Displayable
sheets 16.
H ok 8938 FFt Input s gnal module
HIO,8938 AU
FFT Module with anti-aliasing filter. Frequency range dc to
400kHz, sampling rate 1MS/s. Maximum input voltage 400Vdc,
240Vrms.
H ok 8810 4 channel memory Recorders
HIO,8810 AU
4 functions: memory X-T, continuous X-T, memory X-Y, continuous X-Y. 3 channel X-Y
is possible. Input amplifier bandwidth 0~100kHz limited by max sampling rate of 4µs in
memory mode and 100~200µs in continuous modes. Memory size per channel 8k with 8
bit resolution. Paper 110mm x 30m. Full scale 90mm in 10 divisions. Time axis up to 160
divisions in memory mode giving 32ms~1,600s display. Continuous mode chart speed 1s/
div~50min/div in 12 steps. Input floating 10mV/div~5V/div in 12 steps with fs offset. Internal
trigger with level control. External trigger TTL or contact closure. Successive transient recording
possible. Multiple recorder synchronization possible.
H ok 8811 3 Analogue 8 D g tal channel memory Recorders
HIO,8811 AU/MY
Four functions, memory X-T, continuous X-T, memory X-Y & continuous X-Y. Three channel
X-Y is possible. Input amplifier bandwidth 0~100kHz limited by max sampling rate of 4µs in
memory mode and 100~200µs in continuous mode. Memory size per channel 8k with 8
bit resolution. Paper 110mm x 30m. Full scale 90mm in 10 divisions. Time axis up to 160
divisions in memory mode giving 32ms~1,600s display. Continuous mode chart speed
1s~50min/div in 12 steps. Input floating 10mV~5V/div in 12 steps with full scale offset.
Internal trigger with level control. External trigger TTL or contact closure. Successive transient
recording possible. Multiple recorder synchronization possible. Hioki 9306 and 9307 probes
optional.
41

42
memoRY RecoRDeRs contInUeD
H ok 8835 4 channel Waveform & 16 channel
memory Recorder
HIO,8835 AU
Memory 12 bits x 100k per channel or 500k for a single channel.
Analog input channel ranges 10mV~50V/div, 10X div, 400Vdc,
240Vac rms max. In-built FDD and type-III PC card slot. Fastest
sampling rate 1MHz. Paper 110mm x 30m. Colour TFT display.
Additional functions include waveform parameter calculation
including rms values, area value, rise and fall times. AC mains
operation.
H ok 8835-01 4 Analogue, 16 Log c channel
Waveform Recorder
HIO,8835-01 AU
Memory 12 bits x 1 megaword per channel or 4 megaword for a
single channel. Analog input channel ranges 10mV~50V/div, 10X
div, 400Vdc, 240Vac rms max. In-built FDD & type-III PC card
slot. Fastest sampling rate 1MHz. Paper 110mm x 30m. Colour
TFT display. Additional functions include waveform parameter
calculation including rms values, area value, rise and fall times. AC
mains operation. Logic probes must be rented seperately.
H ok 8841 8 Analogue, 16 channel
memory Recorder
HIO,8841 AU/NZ
Memory 12 bits x 4 megawords/ch for 2 analog ch, to 1
megawords/ch for 8ch. In-built FDD, type III PCMCIA card slot
(for flashcard & HDD up to 520Mb). Sampling rate of 1MHz
max. Functions memory, real time record, rms, real time/memory,
X-Y memory, FFT. Trigger functions level, window in, window
out, voltage drop, rms level, cycle, logic pattern trigger 1,0 or
X (disregard). When using logic channels, logic probes must be
rented seperately. Measurement range 400Vdc, 240V rms, low
pass filters 5Hz, 500Hz, 5kHz or 100kHz, input coupling dc, GND,
ac. Large 10.4” colour TFT display for settings and waveform
display, wide thermal printer fitted. On screen help function. All
settings and waveforms can be saved to media, waveforms can
be saved as binary, text or bmp files.
H ok 8842 16 Analogue, 16 Log c channel
Waveform Recorder
HIO,8842 AU
Memory 12 bits x 16 megawords/ch for 2 analogue ch, to
2 megawords/ch for 16 ch. Analogue input channel ranges
10mV~50V per div, 10X div, 400V dc, 240V ac rms max.
In-built FDD, type III PCMCIA card slot (for flashcard & HDD up
to 520Mb). Sampling rate of 1MHz max. Functions memory,
real time record, rms, real time/memory, X-Y memory. Trigger
functions level, window in, window out, voltage drop, rms level,
cycle, logic pattern trigger 1,0 or x (disregard). When using logic
channels, logic probes must be rented seperately. Measurement
range 400V dc, 240V rms, low pass filters 5Hz, 500Hz, 5kHz,
or 100kHz, input coupling dc, GND, ac. Large 10.4” colour TFT
display for settings and waveform display, wide thermal printer
fitted. On screen help function. All settings and waveforms can
be saved to media, waveforms can be saved as binary, text or
bmp files.
H ok 9305 tr gger cord for H ok memory Recorders
HIO,9305 AU
Plug each end of cable 3.5mm. Trigger cord enables master
slaving of the Hioki 8835, 8810 and 8811 memory recorders.
One end connected to the trigger output socket of master
recorder the other end connects to the trigger input socket of the
second recorder which is the slave. Trigger pattern set up for the
master and the slave recorder set just to external trigger.
H ok 4 channel D g tal Probe for use w th HIo,8835
HIO,9306 AU
Contact interface for HIO, 8811, 8835, 8835-01, 8841 & 8842
memory recorders. Threshold digital >1.4V maximum input 50V.
Contact closure input, 2kΩ input resistance 30V allowable input.
Response time 2µs.
H ok 9320 4 channel contact & D g tal Log c Probe
HIO,9320 AU
For HIO, 8811, 8835, 8835-01, 8841 & 8842 memory
recorders, 4 channels per probe, max of 4 probes per recorder.
Use in conjunction with 9321 line logic probe. Threshold digital
selectable 1.4V, 2.5V & 4V. Response time 500ns max. Relay dry
contact detection. Max allowable input 50Vdc.
H ok 9321 L ne Log c Probe
HIO,9321 AU
Four channels (insulated) per probe. Detection of 60~150Vac,
170~250Vac, 20~150Vdc & 70~250Vdc in 2 ranges.
Response time slope rise 1ms, fall 3ms. Max input low range
150V rms, high range 250V rms. Max rated voltage to earth
250V rms. Connector cable 1.5m. Probe tip cable 1m.
H ok K t of three 9322 H gh Voltage true rms
Interface
HIO,9322-KIT AU
Used with many memory recorders, eg. Hioki 8835. Operating
modes 3. DC mode for waveform monitor output dc to 3MHz, ac
mode detection of power surge noise 1 kHz~10MHz. Rectified
true rms output of dc & ac voltages. 40Hz~100kHz response
speed 200ms or less. Max voltage dc 2kV, ac 1kV CATII, AC/DC
600V CATIII, balanced differential input 1/1,000 divider.
H ok 520mb PcmcIA Hard D sk for HIo,8835 &
8841
HIO,8835-HD520 AU
Data can be stored as mem file which is binary, data can be
replayed on recorder, txt file which is text so as data can be read
using excel, bmp file so screen dump can be saved for import
to word document, single or dual FFT binary file for playback on
recorder. File can be saved as setting file, useful for customers
who rent the memory recorder for same applications again.
Transfer files to a PC and reload next time recorder is rented,
saves time in use of recorders. Card can be plugged in to a
PCMCIA Type III slot on a laptop, files can be stored or viewed.
sand sk compact Flash card 512mB w th PcmcIA
Adaptor
COM,FLASH512MB AU
Compact Flash Card 512MB typeI with PCMCIA Adaptor.
H ok 9132 cl p-on ac current transducer
HIO,9132 AU
Ranges 20~1kA fs. Short term overload capability 2kA. Output
0.2Vac. For use with Hioki 8800 series recorders, for current
waveform recording.
H ok 9018-10 500A ac clamp-on transducer
HIO,9018-10 AU
Selectable ranges 10~500A. Output voltage 200mVac fs per
range selected. Up to 3kHz frequency response. BNC connection.
H ok 9555 s gnal cond t oner w th 9278 200A
Ac/Dc clamp-on transducer
HIO,9555-9278 AU
Frequency bandwidth dc to 100kHz, rated output 2V for fs of
range. Clamp 20mmØ. Suitable to view waveforms with memory
recorders.
H ok 9304 Input Attenuator for 8800 ser es
Recorders
HIO,9304 AU
Max input 600Vdc/ac peak.

STRIP CHART
RECORDERS
Hybrid & Pen
Recorders
Analogue
in (Ch)
stRIP cHARt RecoRDeRs
Chart Paper
(mm)
Yokogawa 3057-22 2 Pen Portable Recorder
YEW,3057-22 AU
Twelve input ranges 10mV~50V fs, 150mm x 15m Z fold or roll chart, speeds 20mm/
h~600mm/min. Accuracy 0.5%. Power 240/50Hz, rechargeable NiCad battery or 12Vdc
external.
Yokogawa 3712-31 3 Pen Vert cal chart Recorder
YEW,3712-31 AU
Input ranges dc voltage 10mV~200V fs. Thermocouples including type T & K. Chart speed
10mm/h~20mm/s. Pen offset compensation. Memory card optional.
Yokogawa 3712-41 4 Pen Vert cal chart Recorder
YEW,3712-41 AU
Input ranges: dc voltage 10mV~200V fs. Thermocouples including type T & K. Chart speed
10mm/h~20mm/s. Pen offset compensation. Memory card optional.
Yokogawa 3750 10 channel mult po nt Recorder
YEW,3750 AU
Ten channel hybrid recorder. Input ranges dc 20mV~20V, thermocouple, RTD. Scans 10
channels in 2s. AC mains operation.
Yokogawa 3750-Dc 20 channel Hybr d Recorder
YEW,3750-DC AU
Input ranges dc 20mV~50V, thermocouple & RTD. Scans 20 channels in 2s. Operates from
10~32V external dc. RS232C interface option fitted.
Yokogawa 3760 30 channel Recorder
YEW,3760 AU
Analogue and digital printout. Ten colour with channel identification number. Scans in 2s. Chart
speeds 1~1500mm/h. Inputs dc (20mV~50V range), thermocouple (R, S, B, K, E, J, T, L, U,
N, W, Kp) & RTD. Memory card reader. Memory card included with several typical set-ups.
Yokogawa DR130 Hybr d 20 channel Recorder FDD
YEW,DR130 AU
Includes 3.5” FDD. Input unbalanced floating 20mV~50Vdc, TC, RTD and contact. Accuracy
0.05%. Reads 20 channels in 2s. Recording width 150mm. Data can be saved to 500k of
internal RAM either directly or due to alarm conditions. The saved data can be copied to a 3.5”
FDD file suitable for inclusion in standard spreadsheet programmes.
Yokogawa 512K memory card for Yokogawa Recorders
YEW,MEM512 AU
Memory card 512k. For YEW,3750, YEW,3760, YEW,3712-31 YEW,3712-41 and
YEW,3701-85 recorders.
Chart Speed DC Supply FDD Voltage Ranges (V) TC RTD Sample Rate
(Hz)
YEW,3057-22 2 150 10mm/s 10mV – 50
YEW,3712-31 3 250 1,200mm/min 10mV – 200 Yes 135 Yes
YEW,3712-41 4 250 1,200mm/min 10mV – 200 Yes 135
YEW,3750 10 150 1,500mm/h 20mV – 50 Yes 0.5 Yes
YEW,3750-DC 20 150 1,500mm/h Yes 20mV – 50 Yes Yes 0.5 Yes
YEW,3760 30 250 1,500mm/h 20mV – 50 Yes 0.5 Yes
YEW,DR130 20 150 1,500mm/h Yes 20mV – 50 Yes 0.5 Yes
VoLtAGe cURRent RecoRDeRs
PLotteR PRInteR
RS232
tech-Rentals ct term nat ons for H ok 8710, etc
TR,CT-5 AU
Termination box for 5A output current transformers. For use mainly
with HIO,8710. Comprises quantity 3 shunts 0.04Ω. Output 0.2V
@ 5A. Use with DRA,TR2015’s.
H ok 8206 2 channel Voltage & current ac chart
Recorder
HIO,8206 AU
The chart records a true rms. Equivalent reading. AC voltage
channel, 3 ranges 50~140V, 100~280V & 250~600V. AC
current channel, 0~10, 0~20, 0~50, 0~100, 0~200 &
0~500. Chart speeds 600mm/h~20mm/h. Note the supplied
9651 clamp-on current probe will measure max 46mmØ
conductor. Frequency range of the clamp 40Hz~1kHz.
H ok 8710 3 channel Ac/Dc Recorder
HIO,8710 AU
Intended mainly for recording ac line voltage and current. Data is
recorded graphically and printed. Input voltage ranges 70~750V
rms ac in 4 ranges with optimised scale, 0.05~7.5V dc in 5
ranges. AC current ranges using 9008 and 9132 clamp-on
probes 10~1000A. Uses type 9221 thermal paper 110mm x
30m. The recorder is suitable for voltage measurements from
PAM thyristor inverters but not all voltage levels with PWM
inverters. Chart speed up to 30 div/min (1div is 9mm). Response
time 0.6s.
HP 7440A 8 Pen Plotter
HP,7440A MY
Media sizes. 210 X 297mm (ISO A4) 8.5 X 11in (ANSI A). Regular plotter paper,glossy
presentation paper, fast-dry overhead transparency film. 8 fiber-tip pens, automatic pen
changing & capping. Max plotting area: Y-axis 191mm (7.5in) for A & A4 size paper, X-axis
257mm (10.1in) for A size paper. Resolution: addressable step size: 0.025mm (0.001 in).
Pen Velocity: pen up 52cm/s (20 in/s). pen down max 40cm/s (16 in/s), programmable
1~40cm/s in 1cm/s increments. Acceleration: approx 1.2g’s. Interface Options: RS-232-
C/CCITT V.24 Asynchronous serial, ASCII, 60-byte buffer size.Switch selectable baud rates:
75~9600. Switch selectable parity: odd, even, or off. HPIB: Switch selectable addresses:
0~31 (31 sets listen-only mode). Size: 308(d) x 460(w) x 125(h)mm. Weight: Plotter 4.1kg.
Power supply 1.4kg.
43

44
PRESSURE & HUMIDITY TRANSDUCERS
Model Type Analog Out Pressure (Bar) Differential Humidity ( %) NATA Operating
Temp (°C)
ASH,1000 Pressure 4~20mA 1,000
DRU,PTX1400-4 Pressure 4~20mA 4
DRU,PTX1400-25 Pressure 4~20mA 25
DRU,PTX1400-40 Pressure 4~20mA 40
DRU,PTX1400-400 Pressure 4~20mA 400
DRU,PTX1400-600 Pressure 4~20mA 600
FLU,PV350 Pressure 42 Yes
SHA,P1241-500 Pressure 0~5V 35
SHA,P1241-10000 Pressure 0~5V 690
SHA,P3061-4D Pressure 0~5V 280mBar Yes
SHA,P53363-500 Pressure 0~5V 34.5
TRA,8204-1D-20A Pressure 4~20mA 4
TRA,8891-4-10V Pressure 0~10V 4
TRA,8891-4-20A Pressure 4~20mA 4
VEG,BAR20-1 Pressure 4~20mA 1
E&H,PMP-1BAR Pressure 4~20mA 1
E&H,PMP-4BAR Pressure 4~20mA 4
E&H,PMP-40BAR Pressure 4~20mA 40
E&H,PMP-100BAR Pressure 4~20mA 100
JUM,40BAR Pressure 4~20mA 40 -40~85
KUL,HEM375-5000 High temp pressure 0~100mV 345

PRessURe & HUmIDItY tRAnsDUceRs contInUeD
trafag 8204 1Bar ,14PsI, 4~20mA, D fferent al
Pressure transducer
TRA,8204-1D-20A AU
Accuracy ±0.3% FS. Overpressure 10bar (145psi). Output
4~20mA. Pressure connection G ¼” male. Bandwidth 1kHz.
Media temperature 125ºC. IP65 rated. Power supply 10~30V.
Vega Bar 20 0~1Bar transducer w th D splay
VEG,BAR20-1 AU
Output 4~20mA. LCD display and is rated IP65. Over pressure
resistant to 10bar & -1bar. Measurement accuracy 0.5%, linearity
deviation 0.085%. May be set to bar, psi, kpa, mpa,mmH2O,
mH2O & mbar. Output can be 4~20mA or 20~4mA. Integration
time 0~10s. Density factor may be entered formm & m, output
simulation indication module has 20 segment bar graph and
4 digit display which may be scaled (has factory default reset).
Supply required 12~36Vdc.
schaev tz P53363 500 PsI, 0~5V Pressure
transducer ncl snubber
SHA,P53363-500 AU
Output 0~5V.
schaev tz P1241 500PsI Pressure transducer
SHA,P1241-500 AU
Output 0~5 V. Port ¼”BSP (f). Operation12Vdc or mains.
schaev tz P1241 10,000PsI 0~5V Pressure
transducer ncl snubber
SHA,P1241-10000 AU
Pressure transducer 10,000psi, includes snubber, 0~5V output.
Fluke PV350 Vacuum/Pressure Ind cator
FLU,PV350 AU
Can be used with a digital multimeter (eg Metrix MX45) to act as
an indicator. Range, pressure to 600psi (4137kPa) & vacuum
0~29.22”Hg (0~76cmHg ). Results in either psi or kPa.
Connector ½”NPT (m). Cable 2.4m provided. Battery powered.
Ashcroft 1,000 Bar Pressure transducer
ASH,1000 AU
Range 10~36Vdc supply. Output 4~20mA. Connection ¼”NPT
(M).
Rotron c temperature/Hum d ty transducer for
Datataker Dt600/605
ROT,HTO45R001V AU
Humidity range 25~90%RH 10mV/%RH accuracy 3% resolution
0.6%. Temperature range 5~50ºC, 10mV/1ºC accuracy 1O, rep
0.2ºC. Datataker will supply around 100mA through switched
supply. Response time 10s humidity, 20s temperature. Duct
mount model 120mm long x 25mmØ. Supply 4.8~24Vdc draws
4mA.
Va sala HmP 135Y 160ºc Hum d ty Probe
VAI,HMP-135Y AU
High temperature humidity and temperature transmitter. Sensor
head operates from 0~180ºC. Measurement range 0~100%RH.
Accuracy of 1%RH at 20ºC. Output 0~5Vdc. Other outputs easily
set including 4~20mA. Operates from 0~160ºC.
Va sala HmP 235Y 180ºc Hum d ty Probe
VAI,HMP-235Y AU
High temperature humidity and temperature transmitter. Sensor
head operates from 0~180ºC. Measurement range 0~100%RH.
Accuracy of 1%RH at 20ºC. Output 0~5Vdc. Other outputs easily
set including 4~20mA. Operates from 15~30Vdc or ac mains.
DIstAnce meAsURement & sURVeYInG
tAcHometeRs/stRoBoscoPes
Le ca D sto Pro Laser D stance measurement
LEI,DISTOPRO AU/NZ
Typical accuracy ±1.5mm. Will average over 8 measurements
for greater accuracy. Built in function for height measurement and
enclosed angles,etc. Memory can be divided into groups, e.g. 200
groups with 5 measurements. Includes PC interface and software,
telescope to help find dot in daylight and bubble level to enable
horizontal measurement.
m tutoyo 500-172 D g mat c cal per
MIT,500-172 AU
Range 0~200mm (0~8”), resolution 0.01mm (.0005”). Absolute
measurement, LCD display. Temperature operating range 0~40ºC,
storage temperature -10~60ºC. Button settings ON/OFF, inch/
mm. Origin, zero/ABS.
Phantom 53550 Radar Gun kph, w th case and
tun ng Fork
PHA,53550 AU
Professional doppler K band (24.150GHz) stationary radar
gun. Fast action, pull the trigger and the speed display appears
instantly. Unit is invisible to all radar detectors. Power requirements
10.5~16.5Vdc, 13.5Vdc nominal, 1.5A max, external source,
connection via 6’ coiled power cord with fused lighter plug.
Operating environment -20~60ºC, 90%RH @ 37ºC (noncondensing).
Accuracy ±0.17kph. Accuracy verification tuning
fork (K-Band), internal 90kph. Speed range 17~332kph.
Jenopt k Lem300-Geo Laser Range F nder
& speed Gun
JEN,LEM300-GEO AU
Includes precision inclinometer and compass. Measures up to
300m horizontal or sloping distances. Distance measurements
updated at 50Hz so accelerations can be analysed via RS232
interface. Overall accuracy ±10cm. Rechargeable batteries.
H lt Pm10 mult D rect onal Laser
HIL,PM10 AU
Triple laser alignment system. Instrument produces 3 visible lasers
each at 90O. Supplied with contractors kit including clamps,
magnetic bracket, targets in case. Accuracy ±3mm in 10m, selfleveling
from ±4O to horizontal.
monarch Palmstrobe compact s ze Portable
stroboscope
MON,PALMSTROBE AU
Compact size portable stroboscope, flash rate from
100~12,500FPM, 6 digit alphanumeric backlit LCD. Tachometer
range 5~250,000RPM (only with external sensor connected,
not included). External sensor input TTL only. Supplied with 2 x
removeable rechargeable battery packs, charger and transit case.
monarch PLt200-KIt D g tal contact/non contact
tacho
MON,PLT200-KIT AU
Hand held digital contact/non contact tacho kit. Ranges optical/
non contact 5~200,000 RPM, contact 0.5~20,000 RPM.
Display 5 digits, 5 alpha numeric LCD. Non contact operating
range 90cm, tripod mounting. Direct contact tips and contact
wheel supplied. Programmable for IPM, FT/M, YPM, cm/M, m/M,
RPM, RPS, RPH and Totaliser up to 200,000. Output TTL pulse.
H ok 3404 opt cal/contact tachometer
HIO,3404 AU/NZ/MY
Autoranging 4 digit display. Ranges in RPM mode 30~99.9,
1,000~9,999 & 1,000~9999 x 10. Ranges in RPS mode
0.5~99.99, 100~999.9 & 1,000~1,600. Analogue output
1mV/10RPM or 1mV/100RPM, accuracy 4%. Tripod mounting.
Internal battery or external ac operation. Contact adaptor included
with cone and peripheral ring.
45

46
ENDOSCOPES
Model Type Diametermm Length - Metre Articulation
FIB,MTFS15-1000 Fibreoptic endoscope 1.5 1 None
MOR,MSGI-1350 Fibreoptic endoscope 8 1.3 Semi rigid
MAC,FB5-1400A Fibreoptic endoscope 4.3 1.25 2 way
OLY,IF8C5-30 Fibreoptic endoscope 8 3 4 way
OLY,IF11D4-20 Fibreoptic endoscope 11 2 4 way
OLY,IV6C6-20-ZOOM Video endoscope 6 2 4 way
OLY,IV8D3-20 Video endoscope 8.4 2 4 way
OLY,IPLEX-MX Video endoscope 6 3 4 way
SIL,PF136 Video endoscope 9 1.32 Semi rigid
AQU,SNAKEEYE Colour video flexible cable 30 9.1 None
WOH,MINISPRING Colour video rigid push rod 22 20 None
WOH,VIS220 Colour video flexible cable 26 19.5 None
WOH,VIS230-S CAMERA Camera 25 30 Semi-flexible
WOH,VIS250-S CAMERA Camera 26 30 Flexible
WOH,VIS2000 Colour video flexible cable 51 30 Rotating head
RAD,GATORCAM-25-30 B&W videoscope and recorder 25 30 None
PEA,FLEXI-CAM Colour video pipeline inspection system 25 15 None
HEI,TECHNO-6X320 Borescope 6 320mm
OLY,G100-034-090 55 Borescope 10 340mm
SYK,4-30-ARTHRO Borescope 4 180mm
DYO,750 Camera and video processor
enDoscoPes
Pearpo nt Flex -cam P pel ne Inspect on system
PEA,FLEXI-CAM AU
Compact colour video 25mm colour camera with 3lux sensitivity, (light
source white LED’s) on 15m of fully retracting flexi-rod. Flexi-cam
navigates multiple 90O bends in 32mm pipes and images are
displayed on the internal colour TFT screen. Images can be recorded
to an external video recorder (not supplied). System operates
from internal fully rechargeable batteries which provide up to 5h
of continuous use when fully charged. Hand-held portability. Fully
waterproof, manually set focus camera. Inspects pipes 25~100mm.
Rad odetect on Gatorcam-25-30 Dra n V deo
Inspect on system
RAD,GATORCAM-25-30 AU
Monochrome video scope 30m x 25mmØ. Kit includes video
display and VCR combination and 33kHz sonde capability so the
camera location can be determined using the RAD,RD400PXL.
Has fixtures to centre the camera in larger diameter pipes.
Camera includes variable illumination. Length of cable extended is
displayed and comments can be added to the image.
Wohler m n spr ng B&W Inspect on camera
WOH,MINISPRING AU
Semi rigid push rod 20m long with 22mm colour camera.
Waterproof to 15m. Kit includes a small battery operated display
with a video output. Large display and recorder option.
Wohler V per camera K t for m n spr ng
WOH,VIPER CAMERA KIT AU
Optional camera with remote control movement of camera for
WOH,MINISPRING. Cannot be used on its own.
Wohler VIs 220 V sual Inspect on system for P pes
and Dra ns
WOH,VIS220
Compact colour video pipeline inspection system, 26mm colour
camera with bright white LED’s on 19.5m of flexible push rod with
metric marking. Camera sensitivity 3 Lux, lens f=2.5mm, F=2.0,
view angle 120º, waterproof to 30m water depth. Suitable for
insertion in pipes and spaces from 40 to 150mm diameter. The
system is supplied with 2 battery packs and an AC charger/power
pack, each battery pack lasts approx 1.5h. Supplied with 5.6”
TFT display with extension cable, video output suitable for video
recorder (not supplied).
Wohler VIs230 serv ce camera V sual
Inspect on system
WOH,VIS230-S CAMERA AU
Features: complete mobile set in rugged case, versatile
applications (pipes from 40mm upwards etc) drainage/sewer/
water pipes, heat exchanger, twin walls, etc. Battery operation,
super bright 5.6” TFT color monitor brilliant pictures, monitor
comes with 2m cable for “out of case” operation. Integrated
RCA video output for documentation purposes, 2 rechargeable
batteries for approximately 2 hours of working time, colour camera
head 25mm Ø, waterproof to 3 bar (IP68), waterproof to 3 bar
(IP68). Extremely bright lighting with switchable white high intensity
LED’s, GFK Semi Flexible Rod with integrated cable, 30 meters
with distance markings, Optional RF radio frequency locator.
Applications: Damage analysis in water/drainage/sewer pipes from
40mm Ø. Inspection of hollow spaces, e.g. front-wall installations,
Control of down pipes, ventilation ducts etc.
Wohler VIs250 serv ce camera V sual
Inspect on system
WOH,VIS250-S CAMERA AU
Compact colour video pipeline inspection system, 26mm colour
camera with bright white LED’s on 30m of flexible push rod with
metric marking. Camera sensitivity 3 Lux, lens f=2.5mm, F=2.0, view
angle 120°, waterproof to 30m water depth. Suitable for insertion in
pipes and spaces from 40~150mm diameter. Supplied with 2 battery
packs and an AC charger/power pack, each battery pack lasts approx
1.5h. Supplied with 5.6” TFT display with extension cable, video
output suitable for video recorder (not supplied).
Wohler VIs2000 30m x 51mm steerable color camera
WOH,VIS2000 AU
For inspection of ventilation ducts, chimneys, chambers and flue gas systems, etc. Kit consists
of color display with joy stick to control the camera. Flexible 30m cable on a reel, with nonwaterproof,
splash resistant, 51mmØ colour camera with illumination. Accessories included to
assist for chimney inspection: a fixture to allow the camera to be lowered down chimneys, a
guide to centre the camera inside chimney-like spaces and a holder to allow the camera to
look up rather than down.
Aqua snakeeye 9m x 25mm V deo Inspect on
AQU,SNAKEEYE AU/MY
For remote inspection work. Very light and compact. Includes a 127mm TFT-LCD display &
30mmØ camera including illumination. Various adaptors are supplied for mounting the camera
to, your hand, 457mm with 90O articulation arm or 9.1m extension cable.

enDoscoPes contInUeD
mach da FB5-1400A 4.3mmØ x 1.25m endoscope
MAC,FB5-1400A AU
End section steerable in 2 axis, 120O. Instrument is fragile due to the narrow diameter and lack
of a thick protective sheath. Light source included.
mor tex msGI-1350 1.35m x 8mm sem r g d endoscope
MOR,MSGI-1350 AU
MOR,MSGS-1350 NZ
Size 8mmØ x 1.35m long. Kit includes a 90O side view adaptor, when used diameter is then
10.1mm. Includes battery light source. View angle 27O. Focal length 10mm~infinity. Working
temperature 0~60ºC. Image 13,000 pixel. Optional video camera available.
mor tex Palmscope V deo capture Dev ce for JPeG &
mov e cl p Recorder Inspect on
MOR,PALMSCOPE AU
Digital Video Recorder, image capture and storage. Used in
conjunction with an endoscope, borescope or videoscope the
PalmScope is an alternative to a VCR for onsite inspection
applications. Unit records, store video sequences and full frame
resolution jpeg images on supplied 512Mb Compact Flash Card.
View images on built in 6.4” TFT LCD screen. Stores jpeg still
images and or mjpeg movie clips. Signal input video NTSC or
PAL, auto-selecting.
mor tex 2c mount Adaptor
MOR,2CMOUNT AU
2C mount adaptor.
camera mount for mor tex eye P ece
MOR,CAM-MOUNT AU
Mount to allow the connection of a standard camera to a Moritex endoscope. Adaptors connect
to where you would normally add a filter to a camera. Ring sizes which this can adapt to
include 52mm, 49mm ,46mm & 37mm. Sony Mavica (SNY,MAVICA-FD95) can be used, or
check the size of the filter which is used on the camera.
s lverado PF136 Portable F brescope
SIL,PF136 AU
Portable fibrescope, 9mm diameter, 1320mm working length,
gooseneck semi rigid insertion tube, supplied with 90º side view
adaptor mirror. Built in battery compartment for LED light source.
Viewing direction 0°, viewing angle 45º, Depth of view 30mm to
150mm. Side view adaptor viewing direction 90º, viewing angle
45º, depth of view 30mm to 150mm, tip diameter 10mm.
olympus IPLeX- mX Portable Industr al V deoscope
OLY,IPLEX-MX AU
IPLEX MX battery powered industrial videoscope, lightweight just
4.5kg out of transit case. 6mmØ, 3m length tungsten insertion
tube, articulation 4 way UP/DOWN/LEFT/RIGHT 120O. Field of
view 120O, depth of field 18mm to infinity, illumination method
LED. Brightness adjustment 11 step, long exposure up to 1sec,
zoom electronic linear up to 3x, built in 5.6inch TFT full colour
display, image recording built in, image format JPEG, over 230
images with supplied CF card. Powered from either rechargable
Li-ion 2X battery packs (4 hours) or AC adaptor.
olympus IPLeX mX t p Adapter - IV76X2-At50s
OLY,IV76X2-AT50S TIP AU
Suitable for OLY,IPLEX-MX. A mirror image is reflected on part of the forward-viewing image.
After underwater use, remove the adaptor immediately to clean and dry it. Otherwise, corrosion
and expansion may make it impossible to remove or mount the adaptor. Diameter 7.4mm.
Direction of view Forward-oblique 50°. Field of view 50°. Depth of field 5mm infinity.
olympus endoscope/Recorder tV camera Inspect on
OLY,VIDEO AU
Video camera, monitor, VCR and adaptor kit to suit Olympus endoscopes. Two mount adaptor.
olympus IF8c5-30 8mm x 3m Long endoscope
OLY,IF8C5-30 AU
Length 3.25m (effective 3m), 8mmØ, angulation range, 4 direction, up/down 120O, right/left
100O, light guide cable length 2m. Optical adaptor fitted AT60DFF, field of view 60O, forward
viewing, depth of field 20mm~infinity. Outer diameter 8.4mm. Operating temperature in air
-10~80ºC, in water 10~30ºC. Operating pressure water 1,013~1,317hPa (1~1.3atm), air
1,013hPa (1-1.3atm). Fluid resistance insertion tube withstands machine oil, light oil. Only
insertion tube can be placed in water. Supplied with eye piece and light source.
olympus IF11D4-20 11.3mm x 2m Length endoscope
OLY,IF11D4-20 AU
Working length 1.7m. Large sharp images with adjustable focus regardless of distance. Depth
of field of view 8mm~infinity, field of view 78O, direction of view forward. Easy up/ down
120O, right/left 100O angulation of bending section which can be locked at any angle. Includes
Olympus ILK-5 light source, halogen lamp. Operating temperature insertion tube including
optical adaptor, in air -10~80ºC, in water 10~30ºC.
olympus IV6c6-20-Zoom V deoscope 6mm x 2m Long
OLY,IV6C6-20-ZOOM AU
Fitted with AT120D/NF optical adaptor, field of view 120O,
direction of view forward, depth of field 5mm~infinity. Angulation
4 way, 150O up/down & left/right, heavy duty tungsten insertion
braid tube. Operating temperature for insertion tube in air
-10~80ºC, in water 10~30ºC. Liquid resistance for insertion tube
- withstand machine oil, light oil and 5% salt water. Supplied with
IV-6A video control unit, which has zooming and virtual scrolling
(panning) with moving images function, extended exposure time
for darker areas, built in image enhancement and freeze frame.
ILH-2B light source, Panasonic 7” LCD colour monitor mounted
on extension arm all fitted to transit case for ease of use. Video
VHS recorder also included in package.
olympus IV8D3-20 8.4mmØ, 2m Long V deoscope
OLY,IV8D3-20 AU
Industrial flexible videoscope, 2m long, 8.4mmØ, distal tip non removeable, field of view 100O,
depth of field 7-122mm (fixed focal point). Angulation 4 way, 120O UP/DOWN, 100O RIGHT
/LEFT. Heavy duty tungsten insertion braid tube. Operating temperature for insertion tube in air
0~50ºC, in water 10~30 ºC. Liquid resistance for insertion tube - withstand machine oil, light
oil and 5% salt water. Supplied with IV-5 video processor unit, ILK-5 light source and TV/Video
VHS recorder.
Dyon cs model 750 V deo camera & Processor
DYO,750 AU
For endoscopes and borescopes with British standard eye piece. TV/Video recorder not
included.
He ne techno 6mm x 320mm t.05.26.302 Borescope
HEI,TECHNO-6X320 AU
Direction of view 70O, with angled extension tube 120O x 120O.
Battery pack included, dc supply cord, battery charger and mains
power pack.
olympus G100-034 090 55 Borescope
OLY,G100-034-090 55 AU
G series rigid borescope 340mm, 10mmØ, direction of view
90O, field of view 55O. Stainless steel insertion tube, operating
temperature -20~150ºC. Includes Olympus ILK-5 cold light
source, Sony CCD-IRIS colour video camera, AK2-10C adaptor
for Sony CCD-IRIS. View via eye piece or via video connection
to TV.
stryker Borescope 4mmx 180mm Long, 27.5o V ew
SYK,4-30-ARTHRO AU
Supplied with Quantum 4,000 light source, 597 camera head and video processing unit. Very
high quality system.
F brescope mtFs15-1000 1.5mm x 1m endoscope
FIB,MTFS15-1000 AU
Working length 1.5mmØ x 1,000mm. Includes light source. Operating temperature -20~60ºC
at atmospheric pressure.
mIcRoscoPes
Proscope scA-12770 V deo m croscope K t
PRO,SCA-12770 AU
Hand-held USB video microscope complete kit. Includes 200X, 100X, 50X, 1~10X
interchangeable lenses, C Mount adaptor, stand and carry case. Connects to a PC via USB
interface. Software allows snap shot still images and real time movie files to be saved.
Resolution is 640 x 480 pixels.
Polaro d m crocam m croscope camera
POL,MICROCAM AU
Instant film camera for binocular microscopes. Simple over eyepiece fitting permits use with
virtually any model.
47

48
HIGH sPeeD VIDeo
PRESSURE VACUUM
GAUGES/RECORDERS
Redlake mot onmeter H gh speed D g tal camera
RED,MOTIONMETER AU/NZ
Up to 1,000frames/s, selectable 50, 60, 125, 250, 500 &
1,000frame/s, exposure rates 1X, 2X, 3X, 4X, 5X, 10X & 20X
the recording rate. Manual record, trigger record, adjustable pre
trigger 0~100%. Storage 4,098 frames. Playback rates 1,2,3,4
,5,10,15,25,30,50, 60,125,250,500 & 1000frame/s. Output
composite video NTSC or PAL (monochrome) also supplied with
video to USB converter, flood lights and tripod.
PRessURe VAcUUm GAUGes/RecoRDeRs
Br stol Babcock 5,000PsI mech chart Recorder
BRI,5000-NATA AU
Circular pressure chart recorder 5,000psi. 12”Ø. Accuracy ±0.5% NATA calibrated. Fitted with
2 speed spring wound chart drive giving 7d or 24h recording. Pressure connection ¼”NPT.
Br stol Babcock 10,000 PsI mech chart Recorder
BRI,10000-NATA AU
Circular pressure chart recorder 10,000psi. 12”Ø. Accuracy ±0.5% NATA calibrated. Fitted
with 2 speed spring wound chart drive giving 7d or 24h recording. Pressure connection
¼”NPT.
crystal XP2 D g tal Logg ng Pressure
Gauge 7bar nAtA cal brated
CRY,XP2I-100-NATA AU
Range 7bar (100psi) resolution 0.1mbar (0.1psi). Accuracy
1.4~7bar ±0.1% of reading. 0~1.4bar ±1.4mbar. Vacuum
±17.5mbar. It also has a 6000 point logging capability. Logging
intervals from 1sec up can be set. Will log either actual pressure,
average pressure or average pressure with max and min. Will also
log on demand.
crystal XP2 D g tal Logg ng Pressure Gauge 10kps
nAtA cal brated
CRY,XP2I-10K-NATA AU
Range 700bar (10Kpsi) resolution 1psi(.01bar) accuracy .1% of reading. Also has a logging
capability. 6000 point pressure logging capability. Logging interval can be set from 1 sec up.
Will log either Actual Pressure, Average Pressure, or Average pressure with Max & Min or log on
demand. NATA Calibrated.
crystal XP2 D g tal Logg ng Pressure Gauge 210bar
nAtA cal brated
CRY,XP2I-3K-NATA AU
Range 200bar (3000psi) resolution 0.01bar (0.1psi). Accuracy 40~200bar ±0.1% of
reading. 0~40bar ±0.04bar. Also has a 6000 point logging capability. Logging intervals from
1sec up can be set. Will log either actual pressure, average pressure or average pressure with
max and min. It will also log on demand.
Floyd Pressure Gauge 0-160bar 4”dB Graduat ons 5BAR
scale
FLO,PG 0-160BAR AU
Analog pressure gauge filled with fluid 0-160BAR 100mm 3/8”BSPT graduations 5bar.
Floyd Pressure Gauge 0-250bar 4”dB Graduat ons 10bar
FLO,PG 0-250BAR AU
Analog pressure gauge filled with fluid 0-250bar 100mm 3/8”BSPT Graduations 10bar.
stewart Buchanan 12 1,000 PsI Gauge nAtA
STE,1000-NATA AU
Stainless steel, accuracy ±0.5% NATA calibrated. Pressure connection ¼”NPT.
Redlake 1000 Frames/sec mot on scope
RED,S1000 AU
Triggering facilities similar to a digital oscilloscope. 4,096 frames can be captured at up to
1,000frames/sec. Images can be viewed from a frame by frame basis to real time. Shutter
speeds 1/60~1/10,000s. Monochrome image 336 x 243 x 8-bit pixels. Weight 5.5kg. PAL
video output. Trigger input TTL. Use any standard oscilloscope to supply the signal. Adaptor can
be used with endoscope.
or on VPDc Ac/Dc Powered V deo Recorder
ORI,VPDC AU
PAL B/G portable video recorder includes NTSC Playback on PAL TV. Two rotary heads, helical
scanning system, 1 track audio.
Model Type Pressure (Bar) NATA Accuracy
BRI,5000-NATA Mechanical Chart Recorder 345 Yes
BRI,10000-NATA Mechanical Chart Recorder 690 Yes
STE,1000-NATA Pressure gauge 69 Yes 0.5%
STE,5000-NATA Pressure gauge 345 Yes 0.5%
STE,10000-NATA Pressure gauge 690 Yes 0.5%
TR,PRESS-NATA Pressure gauge 100 Yes 0.5%
CEC,30BAR Digital gauge & logger 30
CEC,140BAR Digital gauge & logger 140 No ±0.1%
stewart Buchanan 12 5,000 PsI Gauge nAtA
STE,5000-NATA AU
Stainless steel, accuracy ±0.5% NATA calibrated. Pressure connection ¼”NPT.
stewart Buchanan 12 10,000 PsI Gauge nAtA
STE,10000-NATA AU
Stainless steel, accuracy ±0.5% NATA calibrated. Pressure connection ¼”NPT.
tech-Rentals 4,000, 6,000 & 10,000kPa Pressure Gauges nAtA cal brated
TR,PRESS-NATA AU
Three gauges. Accuracy ±0.5% 4,000kPa, 6,000kPa & 10,000kPa.
XP2 D g tal Gauge & Logger 30Bar
CEC,30BAR NZ
Intrinsically safe high accuracy temperature compensated pressure data logger with IANZ
calibration certificate. Records up to 3,000 pressure measurements. Recording intervals or
1s~8h. Data download and analysis on any Windows equipped laptop or PC. Data can be
saved directly into MS Excel. Internal battery powers unit up to 3m. Can be used as a reference
gauge with or without a hand pump.
XP2 D g tal Gauge & Logger 140Bar
CEC,140BAR NZ
Intrinsically safe high accuracy temperature compensated pressure data logger with IANZ
calibration certificate. Records up to 3,000 pressure measurements. Recording intervals or
1s~8h. Data download and analysis on any Windows equipped laptop or PC. Data can be
saved directly into MS Excel. Internal battery powers unit up to 3m. Can be used as a reference
gauge with or without a hand pump.
PosItIon tRAnsDUceRs
Houston 1850-40 Pos t on transducers
HOU,1850-40 AU
Linearity 0.1% travel 40” (1m). Cable tension 280g. Max velocity 132cm/s. Output is a
variable resistance arranged to provide both high level (V) and low level (mV) outputs when
powered from an external source.
Un measure P510-40 Pos t on transducer
UNI,P510-40 AU
Travel 40” (1m). Output 0~5V or 0~10V selectable. Requires 12~30Vdc source.
IncLInometeRs
Wyler cl n tron c 45 Incl nometer Rs-232c
WYL,CL45 AU/MY
Resolution 0.01O. Accuracy better than 30arc sec. Display inclination in all common
measurements. Includes RS232 interface for remote display of inclination and also logging.
Settling time

FORCE
GAUGES
FoRce GAUGes
Ametek cadet 25 D g tal Force Gauge
AME,CADET-25N AU
RS232C interface. Range 0~25N (2.5kg), resolution 0.3N (1g), accuracy 0.5% of full scale.
Deflection 1mm. Display 4 digit LCD. Bi-directional with peak hold for compression & tension.
NiCd operated. 1Vdc recorder output.
mecmes n AFG-1000n D g tal Force Gauge
MEC,AFG-1000N AU
Range 0~1,000N accuracy 0.1% (1 ton) 5 digit display. Sampling rate 1kHz. Overload
protection and counter. Outputs analog, RS232 & Mitutoyo. Accessories, test hook, 12mmØ
compression plate, 30mm & 130mm extension rods.
LOAD CELLS
LoAD ceLLs
Model Type Analog Out (V) RS232 Nata Range(kg) Resolution (g)
AME,CADET-25N Force gauge 0 ~ 1 2.5 12.5
MEC,AFG-1000N Force gauge 0 ~ 1 Yes 100 100
MEC,AFG-1000NALC Force gauge 0 ~ 1 Yes No 100 100
Barlo mtc-150 150lb/68kg Load cell
BAR,MTC-150 AU
Range 68kg compression and tension. Complete with interface operating from 12Vdc or ac
mains giving 0~5Vdc output.
Barlo stc-500 500lb/230kg Load cell nAtA cal brated
BAR,STC-500NATA AU
Specification as above but with NATA calibration. This load cell is suitable for tension only.
AIc sG-Ast-500 500kg s type Load cell w th Panel D splay
AIC,SG-AST-500 AU
Tension and compression 500kg. Nominal output 2mV/V, max excitation 15Vdc, IP67
protection, safe load 125%, compensated temperature range -10~40ºC. Thread M12 x
1.75P. Supplied with 2 x detachable rod end bearings, PM4 -SG-dc-5E load cell panel meter,
power 12~48V dc, ac adaptor supplied, output 0~10V. Panel indication in kg.
Barlo stc-4000 4,400lb/2,000kg Load cell
BAR,STC-4400 AU
Range 2,000kg compression and tension. Complete with series interface operating from
12Vdc or ac mains. Output 0~5Vdc. Cable to digital display unit 6m. Uses ¾”UNF thread.
Barlo stc-5000 5,000lb/2,270 kg Load cell
BAR,STC-5000 AU
Range 2,270kg compression and tension. Interface operates from 12Vdc or ac mains. Output
0~5Vdc. Display resolution 1kg.
mecmes n AFG-1000nALc D g tal Force Gauge
MEC,AFG-1000NALC AU
Range 0~1000N accuracy 0.1%. 5 digit back lit display. Peak data sampling rate 5kHz.
120% overload warning, display invert (reverse) function, dual max, max tension & max
compression plus current reading. Outputs: analogue, RS232 & Mitutoyo. Accessories: test
hook, compression plate, 130mm & 30mm extension rods, rotary coupling. Mounting tapped
holes x 2, M5 x 0.8 x 5.5mm deep max. Optional smart sensors can be used, such as TW60
static torque wrench.
mecmes n tW60 torque Wrench
MEC,TW60 AU
Range to 60Nm, optional accessory to be used with MEC,AFG-1000NALC Force Gauge.
Smart interface, as soon as plugged into force gauge scaled accordingly.
Model Type Range (g) Output (V)
BAR,MTC-150 Load cell 68 0~5
BAR,STC-500 Load cell 230 0~2
AIC,SG-AST-500 Load cell 500 0~10
BAR,STC-4400 Load cell 2,000 0~5
BAR,STC-5000 Load cell 2,270 0~5
BAR,STC-10000 Load cell 4,536 0~5
BAR,STC-20000 Load cell 9,072 0~5
BAR,STC-25000 Load cell 12,000 0~5
EMC,1000KG Tension load cell 1000 Yes
Barlo stc-10000 10,000lbs/5,000kg Load cell
BAR,STC-10000 AU
Range 4,536kg compression and tension. Interface operates from
12Vdc or ac mains. Output 0~5Vdc.
Barlo stc-20000 20,000lb/10,000kg Load cell
BAR,STC-20000 AU
Range 9,072kg compression and tension. Interface operates from
12Vdc or ac mains. Output 0~5Vdc.
Barlo 25,000 lb/12,000 kg Load cell and D splay
BAR,STC-25000 AU
Complete with 10m cable. Includes D shackles, analog and
RS232 output. 12,000kg load capacity.
emc 1000kg tens on Load cell
EMC,1000KG NZ
1,000kg S type tension load cell with digital indicator.
Specification as per EMC,100kg
D ll on eD2000 5,000 kg crane scale
DIL,ED2000-5K AU
Complete with shackles. Range 5,000kg. Accuracy 0.1%.
Resolution 1kg. i.e. 20kg uncertainty. Units of measure: kg, kt, mt,
& lb. Proof load 200% of rated load. Displays gross and net force.
Continuous measurement and peak hold.
49

50
mAteRIALs testInG
SCALES & BALANCES
scALes & BALAnces
Anton Paar DmA 35n Portable Dens ty meter
PAA,DMA35N AU
Portable density, specific gravity & concentration meter. Measuring
range 0.000~1.999g/cc and 0.0~40.0ºC. Built-in pipette style
pump for sample aspiration, with port for optional syringe-filling.
Display of specific gravity, ºBrix, ºBaumé, %alcohol, proof, ºPlato,
API, or %H2SO4. Rated intrinsically safe [ATEX] for use with
batteries, petrochemicals and solvents. Data storage of up to
1024 results, with recall, and infrared port for RS232 download
to serial printer or PC. Wetted parts glass and PTFE. Battery
powered.
A&D GR-202 mercury Dual Range Analyt cal Balance
AND,GR-202 AU
Two-layer construction, splash-proof keyboard and front operating door-lever. Range 210g x
0.1mg & 42g x 0.01mg. One-touch calibration and automatic self-calibration outside preset
temperature limits. Functions include multiple weighing units, counting or %, data memory,
adjustable environment setting and GLP management. Bidirectional RS232C standard. Lowvoltage
operation with ac adaptor.
A&D mercury Fc-10K count ng scales
AND,FC-10K AU
High resolution 10kg scales with sample counting facility. Display resolution 1g, internal
resolution 0.02g. Sample size user selectable – normally 10 pieces. Max count size up to
999,999. AC & NiCd battery operation.
A&D HP-40KA 40kg count ng scale
AND,HP-40KA AU
Capacity 40kg with 0.5g resolution. Can be used to determine battery weight change with
charge, etc.
Ish da 25kg D g tal count ng scales
ISH,CCS3025 NZ
Maximum capacity 25kg, resolution 5g. Features: unit weight, sample weight and tare.
A&D HF-300G mercury 300g count ng scales
AND,HF-300G AU
Scales 310g, resolution 0.001, repeatability 0.001. Includes RS232 port. Includes counting
software. Can be used as counting scales.
Hydramot on V scol te 700 Portable V scometer
HYL,V700S-21 AU
Advanced portable viscometer with stainless-steel probe.
Operating range 0.1~10,000mPaps (cP) with integral
temperature correction -40~150ºC. Probe tip 21mmØ,
immersion length 115mm (viscosity only) or 145mm (viscosity/
temperature). Acetal polymer probe base for handheld or clamped
operation, with coiled-cable connection to meter unit with 5 digit
display. Battery powered.
Model Type RS232 Range (g) Resolution (g)
AND,GR-202 Analytical balance Yes 210 or 42 0.1mg or 0.01mg
AND,FC-10K Counting scale 10kg 0.02
AND,HP-40KA Counting scale 20kg 0.5
ISH,CCS3025 Counting scale 25kg 5mg
AND,HF-300G Counting scale Yes 310 0.001
OHA,EXP4100 Counting scale Yes 4,100 0.01
MET,PB80001 Counting scale 8.1kg 100mg
AND,FG-150KB Platform scale Yes 150kg 0.05
AND,HL400 Scale 400 0.1
AND,FS-15KA Weighing Scales 15kg 1
MET,15KG Weighing Scales 15kg
MET,60KG Weighing Scales 60kg
ohaus eXP4100 4100g Balance and count ng scale
OHA,EXP4100 AU
Capacity 4.1kg. Display resolution 0.01g. Multi-unit display. Repeatability 0.005g. RS232
interface.
mettler PB8001 8kg count ng scales
MET,PB8001 AU
Capacity 8.1kg with 0.1g readability. Sample size selectable 5~100. Can do taring, percent
and dynamic weighing. Powered by battery eliminator.
A&D mercury FG-150KB 150kg scales
AND,FG-150KB AU
Capacity 150kg, 0.05 resolution. Includes RS232 port. National Standards Commission
approved (NSC).
A&D mercury HL400 scale 400g x 0.1g
AND,HL400 AU
Battery operated balance, range 400g, resolution 0.1g
A&D mercury Fs-15kg We gh ng scales
AND,FS-15KA AU
High resolution 15kg scales. Display resolution 1g. AC & NiCad battery operation.
mettler 15kg We gh ng scales
MET,15KG MY
mettler 60kg We gh ng scales
MET,60KG MY

VIBRATION & ALIGNMENT ANALYSIS
Model Type Application Feature Frequency Range (Hz) Max Acc. (G)
ARL,EL-235 Ground vibration logger Monitoring vibration for pile driving
and general construction vibration
BK,2635 Accelerometer charge amp
VIBRAtIon & ALIGnment AnALYsIs
Pruftechn k Rotal gn Ultra Laser shaft Al ghment
PRU,ROT-ULTRA AU
Laser based rotating shaft alignment system. Maximum separation
between emitter and receiver 10m. Aligns horizontal and vertical
machines, aligns coupled and uncoupled shafts equally well. Ultra
modern computer design, backlit colour display, Intel XScale
400MHz CPU, USB for peripheral devices, PC, printer, also
Bluetooth communication. Backlit keyboard, rechargeable Li-Ion
battery pack. Machine train alignment- 14 machines. Alignment
results in 3 quick steps, thermal growth computation. Rotalign
Ultra Reader software included.
Pruftechn k 1500mm Length tens on cha ns
PRU,AL12.116 AU
1500mm length tension chains for PRU,ROT-ULTRA.
Pruftechn k magnet c sl d ng Bracket
PRU,MAG-BRKT AU
Designed to be used with the Rotalign. Used when shafts to be aligned cannot be rotated. A
bracket is required for each non-rotating shaft to be aligned (ie. usually 2 will be required).
madgetech shock101-eB tR-Ax al transportat on Logger
MAD,SHOCK101 NZ
Battery powered, stand alone 3-axis shock recorder, extended battery life of up to 60 days
typical. Measures and records shock as the peak acceleration levels over the user defined
interval. Designed for documenting dynamic environments such as moving vehicles, containers,
ships, etc.
t ny tag, set of 6 Loggers: 3 x shock, 2 x temperature, 1 x Hum d ty
TIN,SHOCKSET AU
For shipping and transport testing. Includes 3 x shock loggers; these record the max G force
in the programmed period. Includes a humidity logger, an internal temperature logger and
temperature logger with external probe. Set also includes an f computer to download and view
the results.
svantek 912A sound V brat on Analyser
SVA,912A AU
Type 1 sound level meter including a single axis accelerometer. Provides standard sound
measurements and vibration measurements including 1/1 octave, 1/3 octave and full
spectrum. Unit will store 1Mb of spectrum analysis information for waterfall plots etc. PC
interface software included. Unit can make part body vibration measurements. If whole body
vibration measurements are to be made the SVA,SV06A accessory must be used.
Logging outdoors enclosure
BK,4333 Accelerometer 10,000
BK,4343 Accelerometer 2~12,000 10,000
BK,8301 Accelerometer 2~12,000 10,000
BK,4371 Accelerometer 0.2~12.7kHz 20,000
PCB,300A20 Accelerometer Low G will operate down to DC dc~300 20
LIN,LSPC-1 Accelerometer
BK,8202 Impact Hammer Frequency response Three different tips
TEX,ATM Blast logger and ground vibration logger Explosion and general construction
vibration monitoring
Logging outdoor enclosure, tri-axial
geophones
BLA,UMX-SM-6 Blast logger Explosion monitoring Tri-axial geophones
PRU,ROT-ULTRA Optical machinery shaft alignment
RIO,VA-10 Vibration analyser Machinery condition monitoring Hand held accelerometer
RIO,VA-11 Vibration analyser Machinery condition monitoring Hand held & magnetic accelerometer;
PC memory card capability
RIO,VM82 Vibration meter Machinery and monitoring Magnetic accelerometer
4.5~500
SVA,912A Tri-axial accelerometer & analyser Whole body vibration measurement Includes whoopee cushion ±50
SVA,SV06A Tri-axial accelerometer & analyser Whole body vibration measurement Includes whoopee cushion ±50
TIN,SHOCKSET Single axis shock logger Shipping and packaging analysis Logging capability
PIE,308B Accelerometer with amp 1~3kHz
MAD,SHOCK101 Tri-axial Bump Logger Logging vibration for transportation
i.e. trucks, containers
Tri-axial transportation logging
svantek sV06A tr -ax al Accel Interface for 912A
SVA,SV06A AU
Accessory kit for human whole body vibration measurement.
Provides 4 accelerometer inputs for the SVA,912A and a tri-axial
accelerometer ‘whoopee cushion’ for whole body vibration.
Can operate as an interface for a standard B & K tri-axial
accelerometer.
svan 948 sound & V brat on data
logger
SVA,948 AU
Includes a triaxial accelerometer an environmental enclose, mic
stand and long life batteries. Logs ground vibration or whole body
and part body measurements. Can simultaneously measure noise
and vibration. Has all the appropriate weighting filters. Large 32MB
internal memory supports advanced time history (RMS or Peak
values) logging of all four channels over the whole working day.
Measurement results can be easy downloaded to any PC using
the USB 1.1 interface and SvanPC+ software.
svan 949 type 1 sound & no se
Analyser & case
SVA,949 AU
Includes an environmental enclose, mic stand and long life
batteries. Three acoustic profiles allow parallel measurements with
independently defined filters and RMS detector time constants.
Each profile provides significant number of results (like for sound
Leq , LMax , LMin , LPeak , SPL, SEL etc). Advanced time
history logging for each profile provides complete information
about measured signal in non-volatile 8MB internal memory and
can be easy downloaded to any PC using USB 1.1 interface
and SvanPC+ software. All required weighting filters (eg: A , C ,
Wk , Wc , Wh ) including the latest ISO 2631-1&2 standard are
available. Measurement results can be stored in large 8MB , nonvolatile
memory and easy downloaded to any PC using the USB
interface and SvanPC+ software.
PcB Low G Accelerometer dc to 300 Hz
PCB,300A20 AU
Single axis accelerometer includes charge amplifier. Range ±20g,
frequency (±5%) dc~300Hz, (±10%) ~500Hz. Shock limit
±5kg. Operating temperature -40~85ºC. Weight 15g. Voltage
sensitivity 100mV/g.
51

52
VIBRAtIon & ALIGnment AnALYsIs contInUeD
B&K 2635 charge Ampl fier
BK,2635 AU/MY
Built-in integrators for displacement and velocity. Sensitivity to 10V/PC. Bandpass filters.
Operates also from external 6~28Vdc or ±14Vdc. Battery operated 100h life. Required with
accelerometers.
B&K 4333 Accelerometer
BK,4333 MY
Frequency range: 2~10,000Hz. Voltage sensitivity 14~24mV/g. Charge sensitivity
14-20pc/g. Maximum sinusoidal acceleration 7500g. Maximum shock 10,000g.
B&K 4343 Accelerometer
BK,4343 MY
Accelerometer. Frequency range: 2~12,000Hz. Charge sensitivity 10~mV/g. Charge sensitivity
10pc/g. Maximum shock 10000g.
B&K 4371 Accelerometer
BK,4371 AU/MY
Frequency range 0.2Hz~12.7kHz. Voltage sensitivity 10mV/G or 0.8mV/Ms2 (approximately)
into 20GΩ. Charge sensitivity 10PC/G or 1PC/MS2. Max sinusoidal acceleration 6,000G. Max
shock 20,000G. Requires 1 charge amplifier.
B&K 8301 Accelerometer
BK,8301 MY
Accelerometer. Frequency range: 2~12000Hz. Sensitivity 10mV/g. Charge sensitivity 10pc/g.
Maximum shock 10000g.
B&K V brat on Impact Hammer
BK,8202 AU
For determining frequency response functions. Individually calibrated force transducer. Comes
with 3 different tips and additional mass to enable pulse duration and frequency range to be
determined.
P ezotron cs Accelerometer and Ampl fier
PIE,308B AU
Accelerometer frequency range 1Hz~3kHz ±5%, 0.7Hz~6kHz ±10%, voltage sensitivity
100mV/g or 10.2mV/m/s2 ±2%. Range: ±50g, ±5V output, resolution 0.001g, vibration
max 500G, shock max 5,000G. Supplied with PCB482A10 ICP line power unit.
L near Accelerometer ±1G dc Response
LIN,LSPC-1 AU
Designed for very low force levels ±1G measurement range. Operates down to dc in frequency.
Output ±5V. Linearity 0.05%, resolution 0.001%. Shock Survivability 100g. Natural Frequency
100Hz.
R on Vm82 V brat on meter
RIO,VM82 NZ
Single axis. Measure acceleration from 0.02~200m/s2. Velocity from 0.1mm~1m/s rms.
Displacement from 0.001~100mm. AC/dc output of 1V full scale.
R on VA-10 V brat on Analyser
RIO,VA-10 AU/MY
Vibration analyser for rotating machinery. Measures acceleration, velocity and displacement.
Stores 500 readings. LCD display with waveform, spectrum and data readout. Auto
measurement function. Includes printer interface.
R on cP-10 Rs-232 Pr nter VA10 nL05 nL14
RIO,CP-10 MY
Printer for RIO,VA-10. Operates from optional NiCd battery pack.
R on VA-11 V brat on Analyser
RIO,VA-11 AU/MY
Includes 2 pickup types hand held (PV55) and magnetic type (PV57). Instrument will measure
acceleration, velocity and displacement. Displays rms, peak and crest factor. Uses FFT to
display power and vibration spectrum. Incorporates PCMCIA card flash memory for data
storage. RS-232 interface is available. Specifications PV57 1Hz~5kHz, PV55 3Hz~20kHz
(velocity 3kHz, displacement 500Hz). Acceleration 0.02~316mm/s2 rms. Velocity
0.1~1,000mm/s rms. Displacement 0.003~28.3 (EQ PP). High pass filter 3Hz, 10Hz &
1kHz. Low pass 1kHz, 5kHz & 20 kHz. Stores 500 measurements.
GLoss meAsURement
AUtomotIVe
texcel Atm explos on and Ground V brat on Logger
TEX,ATM AU
Triaxial geophone and overpressure (airblast) microphone
with logger used to determine explosion and ground vibration
characteristics. Geophone range to ±55.6mm/s, resolution
0.014mm/s up to 6.95mm/s, 0.109mm/s up to 55.9mm/s.
Microphone range 80-dBL~140dBL, resolution 0.049Pa up
to 122dBL (25Pa), 0.40Pa up to 140dBL (201Pa). Sample
rate 20, 50, 100, 200, 500Hz & 1kHz. Bandwidth: geophone
4.5Hz~500Hz, microphone 2Hz~500Hz. Includes software
and download cable. Internal memory 2Mb. Power internal 12V
dc 7Ah batteries. Continuous operation 240h. Supplied with
90~260V 50/60Hz charger, recharge time 8h approx. Instrument
with 16 character LCD display, built into weatherproof pelican
enclosure, rated IP65. Operating temperature range 0~70ºC,
display 0~50ºC. Also supplied with alarm light, reset button and
2 x 15m cable, ideal for vibration sensitive construction projects.
External dc power supply cable also supplied.
ARL eL-235 tr -ax al Ground V brat on Logger
ARL,EL-235 AU
Portable logger with human exposure capability. Monitors ground
and building vibration for long periods. Calculates and stores triaxial
vibration stats, vector sum stats, peak particle velocity (PPV),
rms particle velocity and human exposure (HEF) stats. Includes PC
based analysis software. Sensor frequency response 1Hz~500Hz.
Logs interval, date, time, Leq, Lmax, temperature, battery, L0.1,
L1.0, L10 & L90. Event mode logs date, time, max and duration
(Real time mode = 1000 samples/s). Stores up to 4,096
intervals or events. Power 70mA @ 12V.
Blastron cs UmX-sm-6 explos on Logger
BLA,UMX-SM-6 AU
Triaxial geophones, microphone with logger used to determine
explosion characteristics. Geophones auto-ranging to 110mm/s,
resolution ±0.1mm/. Microphone auto-ranging to 140dBL,
resolution ±0.25dB. Sample rate 250, 500Hz & 1kHz.
Bandwidth geophones 4.5~500Hz. Microphone 2~500Hz.
Includes software and download cable. Internal memory 4Mb.
Power internal 6Vdc 2,600mAh Gel-cells, operating consumption
40mA, sleep mode 10mA. Continuous operation 65h, with 1w
programmable timer schedule. Instrument has a display.
elcometer 402 Glossmeter
ELC,402 AU
Measures the gloss or specular reflection from a variety of
surfaces. Range 0~199.9 gloss units per ISO 2813-1978.
Measuring angles 60O & 20O. Aperture 16 x 33mm ellipse.
Digital display. Statistical functions – min, max, average, standard
deviation. Stores up to 4,000 readings. RS232C interface for a
printer. Operates from ac mains or internal rechargeable batteries.
translock Brake tester and L ght
transm ttance meters
TLI,BTM2-LTM2 AU
Kit contains a brake tester and a light tester check vehicle
conformance for the NSW Road Worthy Certificate. Brake tester
measures the deceleration rate of the vehicle and the light tester
measures the transmission levels of light through the windscreen.

non-DestRUctIVe testInG
Panametr c nDt epoch-Lt Ultrason c Flaw Detector
PAN,EPOCH-LT AU
Handheld flaw detector with fast and bright LCD mono display,
update rate 60Hz, automated transducer calibration. Display
freeze holds waveform and soundpath data, soundpath data
viewable in inch,mm or microseconds. Peak memory feature, RF
display mode, alarms, theshold positive/negative, or minimum
depth. Numeric data logger. EMAT probe compatibility (E110-SB).
Standard DAC and TVG. Software options fitted- Echo-Echo and
Square wave pulser. No probes supplied or connection cables.
Phyn x Ferrous/non Ferrous coat ng
th ckness tester
PHY,SURFIX FN AU
Thickness tester with memory and statistics. Supplied with external
probe, calibration standards and carry pouch. Measurement
range 0~1,500µm or 0~60mils (selectable), tolerance ±1µm
+3% of reading, resolution 0.1µm. Display back light, 4 digit
alphanumeric. Min measuring 5 x 5mm, min substrate thickness
type F 0.5mm, type N 50µm. Calibration factory, zero, foil. Data
memory 80 readings max. Interface infra-red down load data to
PC utilising hyper terminal.
Defelsko Fns2 Ferrous & non Ferrous coat ng
th ckness tester
DEF,FNS2 AU
Storage of up to 250 readings. Supplied with external probe,
calibration standards and carry pouch. Measurement range
0~1.5m or 0~60mils (selectable), tolerance 0~50mm ±1mm,
+1% of reading, greater than 50mm ±2µm, +1%, resolution
0.1mm. Backglow display, HiLo limits audible and visible alerts
when measurements exceed specified limits. Continually displays
updates average, standard deviation, min/max thickness and
number of readings while measuring. Hi resolution mode for
greater precision. Built in infra red port for down loading data.
Defelsko Pos test Pull off Adhes on tester for
concrete & metal
DEF,POSITEST AU
Measures the force required to pull a specified test diameter of
coating away from its substrate using hydraulic pressure. Pressure
is displayed in both MPa and PSI on a precision dial indicator
and can be related to the strength of adhesion to the substrate.
Suitable for coatings on both metal and concrete surfaces.
Conforms with standards ASTM D4541 and ISO 4624.
PcWI 40kV Pulse Poros ty (Hol day) Detector
PCW,P40-PULSE AU
Pulse porosity (Holiday) detector. Detects pinholes in coatings
and wrapping above 150µm on metal substrates such as pipes
and tanks. Can be used on dry or wet surfaces. 0~40kV output,
4 digit LED display of voltage, alarm sensitivity setting between
dry and wet. Supplied with rechargeable battery, 10h charger,
red probe handle and 2m length of rubber coated cable, 60mm
connector for flat brushes, 7m earth cable with clamp, fan brush,
250mm flat brass wire brush, 450mm probe extension and
80mm probe extension.
PcWI 30kV Dc Por s ty (Hol day) Detector
PCW,DC30 AU
DC Porosity (Holiday) detector. Detects pinholes in coatings above
150um on metal substrates such as pipes and tanks. 0-30kV, 3.5
digit LCD display with battery indicator, display of voltage level.
Alarm indicated on front panel, supplied with rechargeable battery,
10h charger, probe handle with neon and 2m length cable, 60mm
connector for flat brushes, 7m earth cable with clamp, fan brush,
250mm flat brass wire brush, 450mm probe extension. Dry
conditions.
m tutoyo s-211 surface Roughness Gauge
MIT,S-211 AU
Surface roughness tester comprising an LCD display and a
detachable detector/drive unit. Parameters measured in Ra, Rz,
and Rmax units. Tip radius 5mm. Data output. NiCd batteries.
m tutoyo sJ-201P surface Roughness tester
MIT,SJ201-NATA AU
Comprises LCD display and a detachable detector/drive unit.
Parameters measured in Ra, Rq, Ry, Rz, Rt, Rp, R3z, Rk, Rpk,
Rvk, S, Sm, Pc, mr, Mr1, Mr2, A1, A2, Vo units. Ranges: 350,
100, 50µm & 10µm, resolution from 0.01~0.4µm. Tip radius
5mm. Data output. NiCd batteries.
m tutoyo 293-330 D g tal m crometer
MIT,293-330 AU
Water resistant and coolant proof (IP65) digimatic micrometer,
measuring range 0~1”, 0~25mm. Resolution .00005”,
0.001mm , quantizing error ±1 count, LCD display. Temperature
operating range 5~40ºC, storage -10~60ºC. Button settings:
origin, zero/ABS, inch/mm, hold.
Panametr cs 26 mg Pocket th ckness Gauge
PAN,26MG AU/NZ
Range 1~500mm, fast min mode. Resolution 0.01mm. Probe
operates -20~150ºC.
Panametr cs nDt 37DL-Plus Ultrason c th ckness
Gauge
PAN,37DL-PLUS AU
Thickness gauge with large display (A-scan), which will display
the returned waveform. It has echo-echo through-paint capability.
Supplied with WIN37DL PLUS software and cable. The supplied
probe is 11mm diameter with a 1~500mm operating range and
a -20~500ºC temperature operating range. The instrument has a
MIL-STD-810E hazardous area operation.
Panametr cs 36DL Plus th ckness Gauge
PAN,36DLPLUS AU
Large display (A-scan), which displays the returned waveform.
Echo-echo through-paint capability. Supplied with WIN95 software
and cable. Supplied probe is 11mmØ with 1~500mm operating
range and -20~500ºC temperature operating range. Instrument
has a MIL-STD-810E hazardous area operation.
Panametr cs 25DLHP th ckness Gauge
PAN,25DLHP AU
Designed for fiberglass, rubber composites and castings.
Measures standard steel, copper, etc. Does echo-echo
measurements. Measures the thickness of material under paint,
etc. Built in 5,000 reading datalogger and an RS232 port.
Krautkramer Dms th ckness Gauge
KRA,DMS AU
Complete with echo verification and logger. Includes high
temperature probe and cable. Incorporates a wave form display
for accurate assessment of material under test, measurement
of thickness whilst ignoring external paint. Probe will operate to
200ºC without cooling, up to 540ºC with cooling. Measurement
ranges 0.75mm~250mm (for different ranges other probes are
available). Resolution 0.01mm. Stores up to 80,000 readings or
1,200 readings with full waveform information.
sonatest th ckness Gauge
SON,T-GAGE-IV+ MY
Range 0.63~500mm, resolution 0.01mm, high speed scanning
mode, selectable backlight, alarm mode, differential mode,
RS232C output, data send using hyper terminal. Supplied with
high temperature probe, temperature range 0~340ºC.
53

54
concRete testInG eQUIPment
eLe type eL35-2020 concrete cover meter
ELE,EL35-2020 AU/NZ
Non-destructive measurement of concrete thickness above
steel reinforcement rods. Measures rod diameter. Depth range
360mm for rod diameters 6~40mm & 200mm depth for rod
up to 6mmØ. Small search head 80H x 50mmØ. Provides a high
resolution capability when mapping out reinforcement structures.
Range 100mm with 6mm bar to 120mm with 40mm bar. Battery
operated.
Profometer-4 Rebar Locator
PRO,PROFO-4 MY
Rebar locator.
Prot meter sm mo sture meter
PRO,SM AU
Moisture meter for survey work. Very good for determining wet
points. Can be used on both concrete and timber. Subsequent
accurate measurements can then be made.
Proceq LR concrete test Hammer
PRO,LR AU
Concrete hardness tester (Schmidt hammer). Supplied with in-built
mechanical chart recorder. Impact energy 0.735Nm, 0.075kgm.
For concrete thickness less than 100mm.
Prot meter cmIII concrete mo sture meter
PRO,CMIII AU
Measures concrete moisture content using 2 methods. Firstly
using impedance as a direct instant method. Secondly an accurate
method requiring placing a box on the concrete and measuring
the humidity generated by the concrete.
Prot meter mo sture measurement system
PRO,MMS-PLUS AU
Moisture meter for detection of moisture in non conductive
solid materials such as wood and masonry. Two measurement
modes, search for qualitaive measurements and measure mode
for precise and locaised moisture content. Supplied with pin
type probes, deep wall probes, hygrometer probe and extention
cord,for RH, ambient temperature or dew point temperature.
Hygrostick probe supplied for surface temperature measurement.
Logging software and RS232 computer interface supplied.
Proceq 2000-nD D g schm dt test Hammer
PRO,2000-ND AU
Concrete hardness tester (Schmidt hammer). Supplied complete
with inbuilt graphical LCD for setting up and graphical display of
results,up to 500 results can be stored. RS232 interface and
software supplied for down loading. Impact energy 2.207Nm.
Engineering units of results in N/mm2, MPa, psi, kg/cm2. For
concrete thickness greater than 100mm.
olsen FtG concrete th ckness Gauge
OLS,FTG AU
Concrete thickness gauge utilising the impact Echo test method.
Can measure concrete thickness in two ranges: 6 to 60cm and
up to 1.8m. This concrete thickness gauge is a battery operated
handheld system for measuring the flaws and thickness of
concrete slabs, pavements, walls and other plate-like structures
from one side. Up to 300 readings can be stored in the field
before the memory is full. RS232 interface and transfer software
supplied.
H lt Ps20 Rebar, copper P pe & electr cal
cable Locator
HIL,PS20 AU
Localise and position of reinforcement, (rebars) copper, aluminium
pipes and unshielded live electric cables. Depth range for
detection of rebars 0~100mm, for copper & aluminium pipes
60mm, rebar diameter 8~36mm, depth detection accuracy
10~30mm ±2mm, above 30-60mm ± 2mm ±10% depth,
above 60~80mm ±5mm ±10% depth, based on 12mm rebars.
Detection of copper & aluminium pipes based on 10~30mmØ,
only detection with depth of 0~60mm, no depth reading, same
for live electric cables, cannot detect live cables in metal conduit
or shielded cables.
HARDness testeRs
H lt Ferroscan concrete Reo scanner
HIL,FERROSCAN AU
Reinforced concrete imaging system. Displays depth of concrete
coverage, location of reinforcement rods and anchor setting
points. Fast, simple operation. Depth mode allows reinforcement
rods at different depths to be viewed. Printer interface and PC
interface and software allow images to be printed and/or stored
for further use. Depth coverage up to 180mm. Reinforcement rod
diameter measurement range 6~36mm. Area covered in a single
measurement run 600 x 600mm; 42 image memory allows total
15m 2 coverage without downloading.
H lt Ps200 Ferroscan system
HIL,PS200 FERROSCAN AU
Portable, quick and easy to use for detecting rebar and other
ferrous objects in concrete structures. Provides accurate on-site
rebar location, depth and rebar diameter. Scans can be evaluated
on the monitor or transferred to a PC or laptop for further
evaluation and report generation. Portable wireless operation,
easy Integrated LCD display makes setting up the scan easy while
providing information over the scan process, fast data download
via infra-red beam from scanner to monitor, convenient Scanner
stores up to 9 imagescans and 98ft of Quickscans and PS 200M
monitor allows you to perform on-site evaluation of rebar depth,
diameter and location.
Krautkramer DynaPocket Rebound Hardness tester
KRA,DYNAPOCKET AU
Based on the Leeb’s method HL, utilising a 3mm tungsten carbide
ball. Other hardness scales can be selected, HS Shore, HB Brinell,
HRB Rockwell B, HRC Rockwell C, HV Vickers and N/mm2 tensile
strength. Choice of 9 material groups can be selected, they are
St Low-alloy/unalloyed steel and cast steel, ASt Tool steel, SSt
Corrosion resistant steel, GCI Gray cast iron, NCI Nodular graphite
cast iron, AL Aluminium cast alloys, brS Brass, brZ Bronze, Cu
Wrought copper alloys.
Proceq equot p Hardness tester
PRO,EQUOTIP AU
Test probe on a flexible lead. Probe type D is standard catering
for most materials. Measurement ranges steels 80~650HB,
80~940HV, 20~68HRC, aluminium castings 20~160HB, cast
iron 90~380HB, brass 40~170HB & copper wrought alloys
43~315HB. Test hardness must not exceed 940HV. Battery
operated.
Bare ss HPe Fm02177 shore A Hardness tester
BAR,HPE-FM02177 AU
Durometer tester for general rubber, elastomer, soft plastic, tires,
rubber rolls & rubber hoses. Surface min 35mmØ, material
thickness of 6mm are necessary for a hardness test according
to the standards. Hardness tests can be conducted in a vertical,
horizontal positions and on places which are difficult to reach. Test
time setable from 0~30s. Reading exactness of ±0.5 Shore and
according to set down standards deviation of ±1 Shore.

NDUSTRIAL CALIBRATORS
Model
Type
Analog Out
Pressure (Bar)
Vacuum (Bar)
Battery
RS232
Accuracy %
AME,PPCE-NATA* Pressure hydraulic 700 Y 0.04 reading 50 30
AME,HL2700N Dead weight tester Y
BEA,BIC200 Industrial incl. Pressure 1 Y 100 50 48 200 100
DRU,DPI603-10-NATA* Pressure pneumatic 10 0.85 Y 0.075 fs 55 55 24 50
DRU,DPI603-20 Pressure pneumatic 20 0.85 Y 0.075 fs 55 55 24 50
DRU,DPI610-160 Pressure pneumatic 160 Y 0.025 fs 55 24 24 24 10
DRU,UPS-IS Current loop Y 0.25 55 55
FLU,725 Industrial 50 5 24 11kΩ Y 300 11
FLU,725-NATA* Industrial Y 55 50 5 24 11kΩ Y 300 11
FLU,743B Industrial Y Y 55 500 5 24 11kΩ Y 300 11
FLU,744 Industrial (hart) Y Y 500 24 11kΩ Y 300 11
GRA,W6-NATA* Water bath 0.1 0~150
HAL,KAL84 Very low pressure 10 Y Linearity ±0.5%
DRU,DBC150TC Dry well temperature 0.3°C -45~150
HAR,9100-A Dry well temperature 0.5°C 40~300
HAR,9105-NATA* Dry well temperature Y 0.1 40~650
HAR,9107-NATA* Dry well temperature Y 0.1°C -45~140
HAR,9141-NATA* Dry well temperature Y 0.5 40~650
JOF,C650 Calibrator
JOF,LPC-NATA* Pressure Y 10 0.8 Y 0.1 fs 200m
SI,PC6-20-NATA* Calibrator & Pump 20 1.0
SI,PC6-40-NATA* Calibrator & Pump 40
SI,PC6-700-NATA* Calibrator & Pump
SI,PC6-1000-NATA* Calibrator & Pump
SI,HTP1 Pressure pump 1000
HAR,9150 Thermocouple furnace N Y ±0.5°C 150~1200
HAR,9170-R-NATA* Metrology well
calibrator
Y ±0.01°C -45~140
HAR,3125-NATA* Temperature surface
Y ±0.5°C~200°C,
35~400
probe calibrator
±1%~400°C
JOF,1200SE Temperature calibrator 150~200°C 150-1200
HAR,7102-NATA* Temperature micro bath Y ±0.25°C -5~125
SI,PC6-PRO 350 Temperature micro bath 350
DRU,DPI610-2-NATA* Temperature micro bath 2 -1 Y 0.025°C ±55 0~24 +50 10,
24
DRU,DPI610-20IS Pressure
DRU,DPI610-20-NATA* Pressure
DRU,DPI610-400-NATA* Temperature micro bath 400 Y 0.025°C ±55 0~24 +50 10,
24
*NATA calibrated
Current mA
Current Source mA (Bar)
Frequency kHz
Frequency Source kHz
Loop Power V
Resist measurement Ω
RTD/TC
Temp Source °C
Voltage Max V
Voltage Source V
55

56
InDUstRIAL cALIBRAtoRs
Fluke 5500A mult Product cal brator w th nAtA cal brat on
FLU,5500A-NATA AU
Calibrator sources direct voltage & current, alternating voltage and current, with multiple
waveforms and harmonics, 2 simultaneous voltage outputs or voltage & current. Simulates
power with phase control, resistance, capacitance, thermocouples and RTDs. Selectable ranges
include the following outputs Vdc from 0~1.02kV, Vac from 1mV~1.02kV with output from
10Hz~500kHz. AC current from 0.01µA~11A with output from 10Hz~10kHz. DC current
from 0~11A. Resistance values from short circuit to 330MΩ. Capacitance values from
330pF~1,100µF. Temperature t/c B, C, E, J, K, L, N, R, S, T, U, RTD Pt385 100Ω, Pt3926
100Ω, Pt3916 100Ω, Pt385 200Ω, Pt385 500Ω, Pt385 1kΩ, Ni120 120Ω & Cu427
10Ω.
Fluke 725 Process cal brator
FLU,725 NZ/MY
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current
measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resistance measurement
0.05%, 11kΩ max, source 0.01%, 11kΩ max. Frequency measurement 5 counts
1Hz~50kHz, source 1 count 20Hz~5kHz. ‘K’ thermocouple measurement 0.3ºC, source
0.3ºC. Pt100 RTD measurement 0.5ºC, source 0.2ºC. Measures and simulates 4~20mA, t/c
E, N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs and frequency. Operates from drycell batteries.
Fluke 725 Process cal brator nAtA cal brated
FLU,725-NATA AU
DC voltage measurement 0.025%, 300V max, source 0.02%, 11V max. DC current
measurement 0.025%, 110mA max, source 0.01%, 22 mA max. Resistance measurement
0.05%, 11kΩ max, source 0.01%, 11kΩ max. Frequency measurement 5 counts
1Hz~50kHz, source 1 count 20Hz~5kHz. ‘K’ thermocouple measurement 0.3ºC, source
0.3ºC. Pt100 RTD measurement 0.5ºC, source 0.2ºC. Measures and simulates 4~20mA, t/c
E, N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs and frequency. Operates from drycell batteries.
Includes NATA calibration.
Fluke 743 cal brator
FLU,743B MY
Includes RS232 interface. DC voltage measurement 0.025%, 300V max, source 0.01%, 15V
max. DC current measurement 0.025%, 110mA max, source 0.01%, 22mA max. Resistance
measurement 0.05%, 11kΩ max, source 0.01%, 11kΩ max. Frequency measurement 0.5%,
+5, 40~500Hz, source 1 count 20Hz~5kHz. ‘K’ thermocouple measurement 0.3ºC, source
0.3ºC Pt100. RTDs measurement 0.3ºC, source 0.1ºC. Measures and simulates 4~20mA,
t/c E, N, J, K, T, B, R, S, & C, 2, 3 & 4 wire RTDs, frequency, test limit switches. Can use scaling
factors for measurement & source. Built in calculator. Autostep function. Allows user entered
values. Operates as a 8k point data logger. Note PC software only supports 15 tags.
Fluke 744 Doc cal brator w th Hart
FLU,744 AU/NZ/MY
Documenting process calibrator which includes HART communication protocols for
communicating with and setting up smart transmitters. RS232 interface. DC voltage
measurement 0.025%, 300V max, source 0.01%, 15V max. DC current measurement
0.025%, 110mA max, source 0.01% 22mA max. Resistance measurement 0.05%, 11kΩ
max, source 0.01% 11kΩ max. Frequency measurement 0.5%, +5, 40~500Hz, source
1 count 20~5kHz. ‘K’ thermocouple measurement 0.3ºC, source 0.3ºC Pt100. RTDs
measurement 0.3ºC, source 0.1ºC. Measures and simulates 4~20 mA, t/c E, N, J, K, T, B, R,
S & C, 2, 3 & 4 wire RTDs, frequency, test limit switches. Uses scaling factors for measurement
& source. Built in calculator. Autostep function. Allows user entered values. Operates as an 8k
point data logger. Note PC software only supports 15 tags.
Druck DBc150tc Dry Well cal brator cal brator
DRU,DBC150TC AU
Temperature range -45(below ambient)~150ºC. Accuracy
0.3ºC, resolution 0.01ºC, stability 0.03ºC. Well standard insert
supplied 145mm deep, 5, 6.6 & 9.8mmØ. Heating time 14min
20~120ºC, cooling time 22min 25~-20ºC. Calibrator also
measures sensor outputs, it can measure 5 types of RTD & 11
types of thermocouple. Supports 2, 3, 4 wire RTD and provides
cold junction compensation for thermocouples.
Hart 9100-A Dry Block temperature cal brator
30~300ºc
HAR,9100-A NZ
Stability is 0.2ºC @ 50ºC & 0.3ºC @ 300ºC. Accuracy for
35~200ºC ±0.5 for 200~300ºC ±1, for well holes greater than
¼” ±2ºC.
emerson Process management 375 F eld
commun cator
EME,375 MY
Will configure, test, and diagnose your HART ® and Foundation
FieldBus devices. Able to communicate with any device, by any
manufacturer. Intrinsically safe. Easy upgrade over the Internet.
Interfaces with AMS PC Suite Software.
Hart 9103 Dry Block temperature
cal brator -25~140ºc
HAR,9103 NZ
Dry Block Calibrator. Temperature range: -25° to 140°C. Stability:
±0.02°C at -25°, ±0.04°C at 140°C. Accuracy: ±0.25°C.
Inserts with metric holes from 3mm to 15mm. Well depth:
124mm. Stabilisation: 7mins. Heating time: 18mins ambient to
140°C. Cooling time: 20mins ambient to -25°C. Supplied with PC
Software and RS232 cable.
Hart 9105 Dry Block temperature cal brator -25~140ºc nAtA
HAR,9105-NATA AU
HAR,9105 MY
Range -25~140ºC, accuracy 0.1, resolution 0.01, stability 0.02. RS232 interface for ramp
and soak programming. Well dimensions 150mm deep, 19, 5, 3 & (2x) 6mmØ. Heats and
cools in less than 10min. NATA certified.
Hart 9107 Dry Block temperature cal brator -45~140ºc nAtA
HAR,9107-NATA AU
Range -45~140ºC, accuracy 0.1, resolution 0.01, stability 0.02. RS232 interface for ramp
and soak programming. Well dimensions 150mm deep, 19, 5, 3 & (2x) 6mmØ. Heats and
cools in less than 10min. NATA certified.
Hart 9170-R metrology Well cal brator w th Bu lt- n
Reference & nAtA cert ficat on
HAR,9170-R-NATA AU
Temperature range -45~140ºC with bult in reference
thermometry. Reference input accepts (not supplied) 100, 25
and 10ohm PRT’s. Display accuracy ±0.1ºC, stability ±0.005ºC
full range, resolution 0.001ºC. Well depth 6.3”, insert type A
1/4, 3/16, 1/4, 1/8, 1/4, 3/8”. Large LCD, numeric keypad
and on screen menus. Heating time 32min 23~140ºC, 45min
-45~140ºC, cooling time 44min 23~-45ºC, 19min 140~23ºC.
Supplied with RS232C interface and CD-ROM software.
Hart 3125 surface Probe cal brator 35~400ºc nAtA
cert ficat on
HAR,3125-NATA AU
Temperature range 35~400ºC. Display accuracy ±0.5~200ºC,
±1~400ºC. Stability ±0.2~300ºC, ±0.3~400ºC. Resolution
0.01º. Heating time 25~400ºC 22min. Cooling time
400~100ºC 65min. Temperature surface plate 3.8”Ø accessible.
Hart 9141 Dry Block temperature cal brator
50~650ºc
HAR,9141-NATA AU/NZ
Range 50~650ºC, basic accuracy 0.5% (holes > ¼” 2ºC).
Insert hole sizes 1/16”, 1/8”, 3/16”, ¼”, 3/8” & ½”. Includes PC
software and interface cable. Heating time 1min to 650ºC. Cooling
25min from 650ºC~100ºC. Well depth 4.875”. Stabilization time
7min.
Hart 9150 Furnace 150-1200ºc
HAR,9150 AU
Temperature range 150~1200ºC. Stability ±0.5ºC, display
accuracy of ±5ºC across entire range. Display resolution
0.1º~999.9ºC, 1º above 1,000ºC. Well diameter 1.25”, well
depth 5.5”, insert type A. 1/16”, 1/4”, 3/8”, 3/16”, 1/8”, 1/2”.
Heating time 35min to 1,200ºC, cooling time 140min.
Jofra 1200se Prec s on temperature cal brator
JOF,1200SE MY
Lightweight, portable for lab and general use. Simple single
step zero setting. Temperature range 300~1200ºC. Excellent
performance characteristics. Accuracy +2ºC. Stability +0.5ºC.
Display in ºC or ºF to 0.1 resolution. Fast cooling and heating.
User-selectable slope rates for controlled thermo switch testing.
Self diagnostics includes semi-auto Switch Test & Hysteresis Test.
Grant W6 temperature Bath nAtA cert fied
GRA,W6-NATA AU
Water/oil bath calibrator for calibrating temperature probes.
Ranges water ambient 100ºC; silicon oil ambient; 150ºC.
Requires 3L oil (not supplied). Digital temperature controller and
display. Stability 0.004ºC. Uniformity 0.01ºC. Display resolution
0.1ºC. Tank size 300w x 150d x 150hmm.

InDUstRIAL cALIBRAtoRs contInUeD
Hart 7102 temperature m cro Bath -5~125ºc
HAR,7102-NATA AU
Range -5~125ºC. Tank diameter 1.9”, 5.5” deep, volume
0.75L, includes tank lid. Accuracy ±0.25ºC, stability ±0.015ºC
at -5ºC, ±0.03ºC @ 121ºC, resolution ±0.01ºC. Heating time
25~100ºC 30min, cooling time 25~0ºC 30min. RS232C
interface and CD-ROM sofware supplied.
Beamex BIc200 Instrument cal brator
BEA,BIC200 MY
For both electronic and pneumatic instruments. Output ranges settable to 119.9% of range
0~10V, 1~5V, 4~20mA, 0~20mA, 10~50mA & 0~50mA. Output source for current ranges
24 & 48V. Input ranges to 4½ digit display 100mV, 1, 10 & 100V, 100mA, 4~20mA, 200Ω.
Pressure measurement ranges 0~1bar & 0.2~1bar. Operates from internal NiCd batteries or
external ac.
Halstrup KAL84 0-1kPa Portable Pressure cal brator
HAL,KAL84 AU
Portable battery operated 0-1.000kPa (0-10mbar) low pressure
calibrator. Linearity ±0.5% ±1 digit, hysteresis 0.1%, medium
- air and all non aggressive gases, pressure connections 6.5mm
hose NW5, interior tubing 5mmØ. Analogue output 0-1V, display
41/2 digit, power supply via mains adaptor 100-240Vac & NiCd
re chargable battery pack.
Jofra c650 cal brator
JOF,C650 MY
A fast, timesaving, and reliable true temperature calibrator
designed for on-site use. Produces temperatures between
33~650°C. Display resolution ±0.1°C, accuracy ±0.9°, stability
0.1°C. Well depth 120mm x 28Ømm. Comes with a multi-hole
insert of 3/2”,1/4”, 3/16” & 1/8” Ø holes. Light weight and
portable.
Jofra LPc Pressure cal brator nAtA cal brated
JOF,LPC-NATA AU
Range to 10bar (145psi). Display 4½ digit, can display in bar, psi, mercury & H2Og. Analogue
output 2Vdc. Includes adaptors ¼”BSP to various BSP & NPT. Measures pressure and
vacuum. Battery operated.
sI Pc6 Pressure cal brator & Pump 20 Bar 0.025% Accuracy
SI,PC6-20-NATA AU
Basic accuracy 0.025%. Range output pressure to 20Bar, output vacuum to -1Bar. NATA
certified Instrument. Measures voltage 0~100mV (1µV resolution), 0~5V (0.1mV resolution)
& 0~50V (1mV resolution) and current 0~50mA (1µA resolution) all at 0.025% accuracy.
Sources 0~10V (0.2mV resolution) & 0~50mA (1µA resolution) also at 0.025% accuracy.
Voltage output regulated 10V ±0.1% current 30mA and unregulated supply 24V ±10%
current 50mA. Pressure switch status. Battery operation 10h or mains operation via charger.
Complete with a full range of pressure connection adaptors.
sI Pc6-40-nAtA Pressure cal brator & Pump nAtA cert fied
SI,PC6-40-NATA AU
Basic accuracy 0.025%. Range is 40bar. Measures voltage 0~100mV (1µV resolution),
0~5V (0.1mV resolution) & 0~50V (1mV resolution) & current 0~50mA (1µA resolution) all
at 0.025% accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA (1µA resolution) also at
0.025% accuracy. Voltage output regulated 10V ±0.1% current 30mA and unregulated supply
24V ±10% current 50mA. Pressure switch status. Complete with a full range of pressure
connection adaptors. Record logging capability 444 and RS232 interface download to spread
sheet files. Battery operation 10h or mains operation via charger.
sI Pc6-PRo 350Bar Pressure cal brator & HtP1 Hydraul c Pump
SI,PC6-PRO 350 MY
Range 0~350Bar. Measures 0~100mV (1µV resolution), 0~5V (0.1mV resolution), 0~50V
(1mV resolution) & current 0~50mA (1µA resolution) all @ 0.025% accuracy. Sources
0~10V (0.2mV resolution) & 0~50mA (1µA resolution) @ 0.025% accuracy. Voltage output
regulated 10V ±0.1% current 30mA & unregulated supply 24V ±10% current 50mA.
Pressure switch status. Pressure media oil, water & non corrosive gases. Battery operation 10h
or mains operation via charger. Complete with a full range of pressure connection adaptors.
sI Pc6 700Bar Pressure cal brator & HtP1 Hydraul c Pump nAtA cal brated
SI,PC6-700-NATA AU
SI,PC6-700 MY
Range 0~700Bar. Measures 0~100mV (1µV resolution), 0~5V (0.1mV resolution), 0~50V
(1mV resolution) & current 0~50mA (1µA resolution) all @ 0.025% accuracy. Sources
0~10V (0.2mV resolution) & 0~50mA (1uA resolution) @ 0.025% accuracy. Voltage output
regulated 10V ±0.1% current 30mA & unregulated supply 24V ±10% current 50 mA.
Pressure switch status. Pressure media oil, water & non corrosive gases. Battery operation 10h
or mains operation via charger. Complete with a full range of pressure connection adaptors.
sI Pc6 Pressure cal brator & Pump 1000 Bar
SI,PC6-1000-NATA
Range is 1,000Bar. Nata calibrated Instrument. Measures Voltage
0~100mV (1µV resolution), 0~5V (0.1mV resolution) & 0~50V
(1mV resolution) & current 0~50mA (1µA resoultion) @ 0.025%
accuracy. Sources 0~10V (0.2mV resolution) & 0~50mA (1µA
resolution) @ 0.025% accuracy. Voltage output regulated 10V
±0.1% current 30mA and unregulated supply 24V ±10% current
50mA. Pressure switch status. Pressure media oil and water (unit
can measure non corrosive gases but not pump them). Battery
operation 10h or mains operation via charger. Complete with a full
range of pressure connection adaptors.
sI Pressure HtP1 Pressure Pump
SI,HTP1 NZ
Hand operated hydraulic pressure pump, capable of 700bar.
Quick priming and pressure generation. High pressure/priming
selector. Fine adjustment control. Pressure release valve. Supplied
with integral IANZ calibrated digital gauge. Uses paraffin oil as the
working fluid.
sI Pressure tP1-40 Pressure Pump
SI,TP1-40 NZ
Fully portable hand operated dual source of pneumatic pressure and vacuum. Generates up
to 40bar pressure or 96% vacuum. Adjustable stroke to provide over pressure protection.
Supplied with thread adaptors. Reference gauge is required, see optional Fluke Pressure
modules FLU,700Pxx.
Druck DPI603 2 Bar Pressure cal brator
DRU,DPI603-2 NZ
2 bar pressure calibrator. 0.075% FS Accuracy includes pump for
vacuum and pressure. Unit will pump up to 2 bar pressure and -
850 mBar vacuum. Measurements can be made to 2 bar positive
pressure and -1 bar vacuum. The unit has a 24 V energising
voltage. Monitors loop current to 55 mA DC loop voltage to 50 V.
Sealed to IP65. Rechargeable battery operated. Unit can display
in 24 different units. BSP 1/8 interface.
Druck DPI603 Pressure cal brator 10 Bar nAtA cert fied
DRU,DPI603-10-NATA AU/NZ
Displays in 24 different units. Interface 1/8” bsp. Accuracy 0.075%fs, includes pump for
vacuum and pressure. Pumps to 20bar pressure & -850mbar vacuum. Measurements can be
made to 20bar positive pressure & -1bar vacuum. Unit has a 24V energising voltage. Monitors
loop current to 55mA dc @ ±0.075% reading & 0.005%fs. Monitors loop voltage to 50V @
±0.15% of reading & 0.02%fs. Unit sealed to IP65. Battery life per charge is approx 40h (no
24V load). *Vacuum not available on NZ model.
Druck DPI603 Pressure cal brator 20 Bar
DRU,DPI603-20 NZ/MY
Accuracy 0.075%fs. Pumps up to 20bar pressure & -850mbar vacuum. Measures up to
20bar pressure & -1bar vacuum. In-built 24V energising voltage. Monitors loop current to
55mA. Loop voltage to 50V. Interface 1/8” bsp. Battery operated.
Druck DPI603 Pressure cal brator 20 Bar nAtA cert fied
DRU,DPI603-20NA AU
Includes pump for vacuum and pressure can display in 24 different units. Interface 1/8” bsp.
Accuracy 0.075%fs. Pumps 20bar pressure & -850mbar vacuum. Measurements can be
made to 20bar positive pressure & -1bar vacuum. Unit has a 24V energising voltage. Monitor
loop current to ±55mAdc @ ±0.075% reading & 0.005%fs. Monitor loop voltage to 50V @
±0.15% of reading & .02%fs. Unit is sealed to IP65. Battery life per charge is approx 40h (no
24V load)
Druck DPI615Pc20BG Portable
Pneumat c cal brator -1to+20bar
DRU,DPI615PC20BG AU
Ranges -14.7~10,000 psi. Accuracy from 0.025% full
scale (FS). Integral combined pressure/vacuum pump. Dual
readout: input and output. 4~20 mA loop test: auto step and
ramp. Intrinsically safe (IS) version. RS232 interface and fully
documenting version. Remote pressure sensors.
Druck DPI610Hc 160Bar Pressure cal brator
DRU,DPI610-160 AU
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range
160bar ±0.025%fs. Voltage input ±50Vdc, ±0.05% reading & ±0.004%fs. Current input
±55mA, ±0.05% reading & ±0.004%fs. Temperature 10~40ºC, ±1 (ambient) switch
open/closed. Voltage output 10Vdc, ±0.1% or 24V ±5%. Current output 0~24mA, ±0.05%
reading & ±0.01%fs. Datalogger stores up to 10,000 values. mA ramp configurable. Pressure
port G 1/8“(f). Pump includes screw adjustment.
57

58
InDUstRIAL cALIBRAtoRs contInUeD
Druck DPI610-2-nAtA 2 Bar Pressure cal brator
DRU,DPI610-2-NATA AU
Pneumatic pressure calibrator including pump and current voltage
standard. Pressure range -1~2bar, ±0.025%fs. Voltage input
±50Vdc, ±0.05%rdg, ±0.004%fs. Current input ±55mA,
±0.05%rdg, ±0.004%fs. Temperature -10~40°C, ±1 (ambient)
switch open/closed. Voltage output 10Vdc, ±0.1% or 24V ±5%.
Current output 0~24mA ±0.05% rdg ±0.01%fs. Data logger stores
up to 10,000 values. mA ramp configurable. Pressure port G 1/8” (f),
includes flexible hose kit. Pump includes screw adjustment.
Druck DPI610-20-nAtA 20Bar Pressure cal brator nAtA cert ficat on
DRU,DPI610-20-NATA AU
Pneumatic pressure calibrator including pump and current voltage standard. Pressure
range -1~20bar ±0.025%fs. Voltage input ±50Vdc, ±0.05%rdg, ±0.004%fs. Current
input ±55mA, ±0.05%, rdg ±0.004%fs. Temperature -10~40°C ±1°C (ambient) switch
open/closed. Voltage output 10Vdc ±0.1% or 24V ±5%. Current output 0~24mA ±0.05%
rdg ±0.01%fs. Data logger stores upto 10,000 values. mA ramp configurable. Pressure port G
1/8f, includes flexible hose kit. Pump includes screw adjustment.
Druck DPI610-20Is Pressure cal brator
DRU,DPI610-20IS MY
Ranges -1~20bar. Accuracy 0.025% fs all ranges. Integral combined pressure/vacuum pump.
Dual readout: input & output. 4~20mA loop test: auto step and ramp. RS232 interface and
fully documenting version. Remote pressure sensors. Intrinsically safe version.
Druck DPI610-400-nAtA 400Bar Pressure cal brator
DRU,DPI610-400-NATA AU
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range
0~400bar ±0.025%fs. Voltage input 50Vdc, ±0.05%rdg, ±0.004%fs. Current input 55mA,
±0.05%rdg, ±0.004%fs. Temperature -10~40ºC ±1ºC (ambient) switch open/closed.
Voltage output 10Vdc ±0.1% or 24V ±5%. Current output 0~24mA, ±0.05% rdg,
±0.01%fs. Data logger stores up to 10,000 values. mA ramp configurable. Pressure port G
1/8” (f), includes flexible hose kit. Pump includes screw adjustment.
ENVIRONMENTAL
TEST CHAMBERS
& OVENS
enVIRonmentAL test cHAmBeRs/oVens
Acs cH106c temperature & Hum d ty env ronmental
chamber
ACS,CH160C AU
Temperature range -70~180ºC, humidity range from
20~95%RH in the range of 10~80ºC, dew point range 5~79ºC
for continous tests. Realtive humidity accuracy ±1%~±3%.
Useful capacity 178L, internal 560w x 564d x 560hmm. External
dimensions 760w x 1115d x 1370hmm. Control by micro PLC
and control panel placed on the door (4 lines alphanumeric
display and keyboard). PLC programs Temp & RH cycles and to
control all chamber functions and alarms. Entry port 80Ømm, door
with 230 x 230mm window, internal lighting, 1 shelf, RS232C
interface. Dissipation at -55ºC,100W. Electrical power 4.5kW
(average 3.3kW). Voltage; 230V +6%, -10%, 50Hz, 1ph. Noise
60dBA measured at 1m from the front in a non reverberating
room. Weight; 390kg (excluding transit case).
Acs W nkratos software for cH160c temperature &
Hum d ty env ronmental chamber
ACS,WINKRATOS AU
Software for remote control of ACS,CH160C temperature and
humidity chamber. Remote programming and control of chamber
plus report generation. Includes Compaq Armada E500 Pentium III
500MHz notebook computer & RS232C interface cable.
Druck DPI610-400 400Bar Pressure cal brator
DRU,DPI610-400 NZ/MY
Hydraulic pressure calibrator including pump and current voltage standard. Pressure range
0~400bar ±0.025%fs. Voltage input 50Vdc, ±0.05%rdg, ±0.004%fs. Current input 55mA,
±0.05%rdg, ±0.004%fs. Temperature: -10~40ºC ±1ºC (ambient) switch open/closed.
Voltage output 10Vdc ±0.1% or 24V ±5%. Current output 0~24mA, ±0.05% rdg,
±0.01%fs. Data logger stores up to 10,000 values. mA ramp configurable. Pressure port G
1/8” (f), includes flexible hose kit. Pump includes screw adjustment.
Druck UPs-Is current Loop cal brator
DRU,UPS-IS AU
Intrinsically safe 4~20mA source and measurement. Provides 24V loop power. Accuracy
0.25%. Input and output resolution 10µA.
Ametek PPce 700 Bar Pressure cal brator w th nAtA cert fied cal brat on
AME,PPCE-NATA AU/MY
High pressure calibrator with pump 700bar (10,000psi). Digital display with 5 digit resolution.
Accuracy over 70bar ±0.07. Accuracy below 70bar ±0.35. Current and voltage measurement
ranges 4~20mA, 0~50mA & 0~30V.
Ametek Hydralyte HL2700n Dead We ght tester
AME,HL2700N MY
Dual range interchangeable piston:-100~4,500kPa, 0.5kPa increments, 500~22,500kPa,
1kPa increments. Accuracy 0.05% of reading. Includes special calculator for high accuracy
pressure calculations and also conversion of units.
ULtRAsonIc BAtHs
son clean 2000Ht Ultrason c clean ng Bath
SON,2000HT AU
Tank size 495w x 295d x 299hmm includes heater and timer.
Model Type Temp C Humidity %RH Size L
ACS,CH160C Temperature chamber -70~180 20~95 178
ACS,CH340C Temperature chamber -75~180 10~98 336
LAB,OTWMD18 Laboratory oven 30~200 66
MEM,ULE400 Laboratory oven 30~200 53
Acs trolley for cH160c temperature & Hum d ty
env ronmental chamber
ACS,TROLLEY AU
Angelanton cH340 env ronmental temperature
chamber
ACS,CH340C AU
Temperature range -75~180ºC, humidity range from 10~98%
RH in the range of 10~80ºC, dew point range 2~94ºC for
continuous tests. Relative humidity accuracy ±1%~±3%.
Capacity 336lt. Internal 600w x 800d x 700hmm. External
dimensions 850w x 1725d x 1516hmm. Control by uPLC &
graphical control panel on the door. Program temp & RH cycles
and control all chamber functions and alarms. Entry port, door with
inspection window, internal lighting, 1 shelf, RS232C interface.
Electrical rated power 5.7kW, maximum used power 9kW. Voltage
400 +6%, -10%, 50Hz, 3ph. Noise 63dBA , weight 750kg
approximately including transit case.
Labec otWmD18 Laboratory oven
LAB,OTWMD18 AU
Fan forced laboratory oven, ambient to 200ºC. Capacity 66L,
digital temperature controller.
memmert ULe400 Laboratory oven
MEM,ULE400 AU
Range 30~220ºC. Capacity 53L, internal 400w x 400d x
330hmm. Two shelves. Electronic temperature control with max
deviation of 0.8~4ºC.

TEMPERATURE METERS/IR
THERMOMETERS
Model Type Temperature
Range ºC
temPeRAtURe meteRs/IR tHeRmometeRs
Fluke 576 Photo temp Infrared thermometer w th
bu lt- n camera
FLU,576 AU/MY
Range -30~900ºC. Minimum measurement 19mmØ, laser class
II, 3 point spot. Includes adjustable emissivity from 0.1~1 by
0.01. Target size 1/60 of distance. Max, min, dif and av displayed
on backlit lcd with bar graph. Data output USB or 1mV/ºC,
windows software and cable included. Accuracy ±0.75% of
reading or ±1ºC which ever is greater. Response time 250ms.
Display resolution 0.1ºC. Continuous measure mode.
Fluke 52-2 D g tal thermometer
FLU,52-2 MY
Relative time clock on MIN, MAX, and AVG provides a time
reference events. Electronic Offset function allows compensation
of thermocouple errors to maximize overall accuracy . Measures
J, K, T, & E-types of t/c. Readout in ºC, ºF, or Kelvin (K). Battery
life: typical 1000h. Battery door allows easy replacement without
breaking the calibration seal. Large backlit dual display shows any
combination of T1, T2, T1-T2 plus MIN, MAX, or AVG. Additional t/
c type R, S, & N (a total of 7 types). Recall function allows logged
data to be reviewed on the display. IR communication port allows
data to be exported to optional FlukeView Forms® Temperature
PC software for further analysis and graphing. Data Logs up to
500 points of data with user adjustable recording interval.
Fluke 54 Dual Input tc w th Logg ng
FLU,54 AU
Digital thermometer with data logging. Takes most t/c inputs.
Accuracy ±0.05% +0.3ºC. Logging 500 points with date
and time stamp. Records min, max or avg. Logged data
can be reviewed on meter or downloaded via IR port (see
FLU,54FLUKEVIEW).
Fluke 54-2 Dual Input tc
FLU,54-2 AU
D series 2, dual input digital thermometer with data logging. Takes
J, K, T, E, R, S, N T C inputs. Accuracy ±0.05%+0.3ºC. 500
point logging with date and time stamp. Records min, max or
avg. Logged data can be reviewed on meter or downloaded via
IR port (see FLU,54FLUKEVIEW : Fluke 54 with IR/RS232 cable
& Flukeview software or FLU,54-2FLUKEVIEW : Fluke 54-2 with
IR/RS232 cable & Flukeview software).
Fluke 54 Dual Input tc w th Flukev ew
Logg ng software
FLU,54FLUKEVIEW AU
Specification as above. Logged data can be reviewed on meter or
downloaded via IR port using cable and Flukeview software included.
Fluke 54-2 Dual Input tc w th Flukev ew
Logg ng software
FLU,54-2FLUKEVIEW AU
Series 2, dual input digital thermometer with data logging. Will take
most TC inputs. Accuracy ±0.05% +0.3ºC. 500 point logging
with date & time stamp. Also records min, max or avg. Logged
data can be reviewed on meter or downloaded via IR port RS232
interface, (using cable and Flukeview software included).
Output Ratio Type K Type J, T,
E, N, R, S
FLU,52-2 Digital thermometer IR communications port Yes Yes
FLU,54 Dual channel digital logging thermometer -250~1,767 Logging with IR interface RS232 2 Ch Yes
FLU,54-2 Dual channel digital logging thermometer -250~1,767 Logging with IR interface RS232 2 Ch Yes
FLU,54FLUKEVIEW Dual channel digital logging thermometer -250~1,767 IR interface & software 2 Ch Yes
FLU,54-2FLUKEVIEW Dual channel digital logging thermometer -250~1,767 Logging with IR interface USB 2 Ch Yes
FLU,576 Photo temperature Infrared thermometer with built in camera -30~900 USB or 1mV/ºC 60:1 No No
FLU,80TK Type K transducer Analogue out No
HAR,1521-NATA Precision thermometer NATA -200~420 RS232 No
MIC,M90Z IR thermometer, narrow field of view -50~1,000 No
RAY,MX4+ IR thermometer laser sighted -30~900 60:1 1 Ch No
RAY,MX6 IR thermometer laser sighted plus digital camera -30~900 Analogue & USB 60:1 1 Ch No
TES,845 IR thermometer with humidity probe & thermocouple probe -35~950 USB 75:1 Yes
Fluke 80tK thermocouple module
FLU,80TK AU
Use with DVM’s and recorders. Accepts K thermocouples.
Temperature range -50~1,000ºC. Output 1mV/ºC. Type 80KP-1
probe included.
Hart 1521 nAtA Prec s on Handheld thermometer
HAR,1521-NATA AU
Accuracy 0.025ºC. Includes 5614 probe ¼”Ø x 12” long.
Calibrated in the -183~500ºC range. Probe operating range
-200~420ºC (cable and transition to 150ºC max).
m kron m90Z-B Infrared thermometer
MIC,M90Z AU
Features through lens sighting and sharp focusing. Temperature
displayed in view finder. Data hold, peak valley and average
functions. Temperature range -50~1,000ºC. Accuracy 1%,
1ºC. Field of view for measurement 1:180. Rechargeable NiCd
batteries give 8h life.
Raytek mX4+ Infrared thermometer
RAY,MX4+ AU/NZ
Range -30~900ºC. Size of measurement target is indicated by
lasers. Instrument includes Type K t/c for additional temperature
measurement to set emissivity. Target size 1/60 of distance. Built
in emissivity table, audible/visible high low alarm. Max, min, dif and
ave display. RS-232 and analog output, windows software and
cable included. Accuracy ±1%, ±1ºC. Response time 250m/s.
Display resolution 0.1ºC. Continuous measure mode.
Raytek mX6 Photo temp Infrared thermometer w th
bu lt n camera
RAY,MX6 AU/NZ
Range -30~900ºC with built in digital camera. Min measurement
19mmØ, laser class II, 16 point circle spot. Includes adjustable
emissivity from 0.1~1.0 x 0.01. Target size 1/60 of distance.
Max, min, dif and av display with backlit lcd with bar graph. Data
output USB or 1mV/ºC, windows software and cable included.
Accuracy ±0.75% of reading or ±1ºC which ever is greater.
Response time 250m/s. Display resolution 0.1ºC. Continuous
measure mode. Digital camera and flash built in.
testo 845 IR thermometer W th Hum d ty Probe and
t/c Probe
TES,845 AU
Range -35~950ºC with built in humidity probe, range 0~100%RH.
Switchable distance ratio far field 75:1 16mm, distance 1200mm,
close focus 1mm, distance 70mm. Laser class II, 4 point spot/cross
far field, 2 point/1point close focus. Includes adjustable emissivity
from 0.1~1, max, min, displayed on backlit LCD . Data output USB
windows software and cable included. Accuracy ±0.75% of reading
100~950ºC. Display resolution 0.1ºC. Continuous measure mode.
Plug in T/C probe supplied.
59

60
temPeRAtURe/HUmIDItY/BARometRIc RecoRDeRs
tHeRmAL ImAGInG cAmeRAs
Haenn KRK thermohygrograph
HAE,KRK501 MY
Temperature -10~50ºC. Humidity 0~100%. Accuracy,
thermograph ±1%fs, hygrograph: ±4%fs.
Hobo Pressure Logger
HOB,PRES AU
Range 0.5~16psia. Safe operating temp range -39~75ºC. Size
46w x 148d x 15hmm & 255g. Stores 1,800 measurements,
42 preset intervals. Data can be exported to spreadsheet. Logs in
meters, feet, mbar and Hg. Battery life 2y.
marcon Argus2 Black & Wh te thermal camera
MAR,ARGUS2 AU
Gives live thermal image, quick and clear image. Good for
fast assessment. Applications include general industrial work,
electrical work, surveillance work and termite inspection. Displays
temperature in the centre of image. If the image needs to be
recorded you can use the NOG,USBVIDEO or the Cannon MV400i
and use the analog video in (The ARGUS2 video out is an NTSC
signal). The accuracy of the temperature measurement is ±2ºC
or ±2% and the range is 0~500ºC ±2 or ±2%. Ambient
temperature measurement is ±2ºC or ±5%. Display indicates a
temperature difference of 0.1ºC. Uses the 0.8~14µm thermal
range. Dust and water proof to IP67. Battery life is 120min per
battery (4 supplied).
IsI 525 snapshot thermal camera
ISI,IR777 AU/NZ
Uncooled thermal imaging system with a 4” high resolution TFT
LCD display which captures and stores an image to a PCMCIA
card. A cursor on the display can be driven to any point on the
image and a temperature at that point read out. Measurement
range is 0~350ºC. PAL video output. In-built PCMCIA card stores
72 images.
external Battery Pack for IsI,IR777 thermal
Imag ng amera
ISI,BATTPACK-EXT AU
Optional sealed lead acid battery pack for ISI,IR777 Thermal
Imaging Camera. Battery capacity 10Ah, includes carry case for
battery with shoulder strap, smartcharger and special connector
with 2m of connection cable.
Fl r InfracAm thermal Imag ng camera
FLI,INFRACAM AU
Simple to use battery operated real time thermal imaging camera.
In-built 3.5” colour LCD, detector resolution 120 x 120. Ranges,
spectral 7.5~13µm, temperature -10~350ºC, accuracy ±2 or
±2% of reading. Imaging frame rate 9Hz, video output via USB
interface, stores 50 images. Down load to PC via USB. Operating
range -15~50ºC. Supplied with Quickview s/w and digital camera.
Fixed spot on LCD, maximum 3 spots via software
Fl r InfracAm thermal Imag ng
camera w th sD Flash card
FLI,INFRACAM-SD AU
Light weight simple to use battery operated real time thermal imaging
camera. Built in 3.5” colour LCD, detector resolution 120X120,
spectral range 7.5 to 13um. Temperature range -10~350°C,
accuracy ± 2.0°C or ± 2% of reading. Imaging frame rate 9Hz, video
output via USB interface, image storage 50 images. Image down load
to PC via SD Flash Card , operating temperature range -15~50°C.
Also supplied with Quickview software and digital camera. Fixed spot
on LCD, maximum 3 spots via software.
Fl r BcAm thermal Imag ng camera
w th sD Flash card
FLI,BCAM-SD AU
Smaller temperature differences and sharper images on the
large LCD. Improved sensitivity (0.10 NETD) of the new BCAM
SD. Easier to use with “Area min-max function”; instantly finds
the hottest or coldest temperature of a target and eliminates the
risk of missing key information. Lightweight, easy to operate and
ergonomically designed for industrial environments. Simply point,
shoot and capture your IR images. SD card stores up to 1,000
infrared images, allowing you to move standard JPEG images to
a computer without cables. Following features available: Finds
problems fast, rugged, ergonomic and lightweight, flexible JPEG
image storage, pinpoint problems with precision,view sensitive
thermal images, download and report, Smart Power Management,
automatic colour alarm and fast detection.
Fl r systems e45 thermacam thermal Imag ng camera
FLI,E45 AU
In-built 2.5” colour LCD, detector resolution 160 x 120. Ranges,
spectral 7.5~13µm, temperature -20~250ºC, accuracy ±2 or
±2% of reading. Imaging frame rate 50Hz, video output standard
RCA composite video, stores 200 images, image run or freeze.
Download to PC via USB. Operating range -15~45ºC. Supplied
with download software and Panasonic digital camera. Single
moveable spot for temperature measurement. Built in tripod
mounting, 1/4”-20.
sAt s160 Real t me thermal Imag ng camera
SAT,S160 AU/NZ
With 2.5” colour LCD, detector resolution 160 X 120. Ranges,
spectral 8~14µm, temperature -20~250ºC ±2 or ±2%. Imaging
frame rate 50Hz, video output PAL, image storage 500 pictures,
image run or freeze. Image download to PC via USB. Ambient
operating range -15~50ºC. Supplied with download software and
Panasonic DMC-FZZA digital camera.
sAt tr pod F tt ng Adaptor For sAt s160 camera
SAT,TRIPOD-FIT AU
Tripod fixture clamps around the SAT,S160 thermal imaging
camera and then allows this camera to be mounted on a tripod.

HUMIDITY &
MOISTURE
METERS
HUmIDItY & moIstURe meteRs
Ge Panametr cs Pm880 Industr al mo sture Analyser
PAN,PM880 AU
Intrinsically safe moisture analyser for compressed air systems,
non-corrosive gases & hydrocarbons such as natural gas (IS
certification to ATEX and CSA). Displays dew point, moisture
concentration, pressure & temperature. Dew point calibrated
measurement range -80~20°C with data to -110°C. Pressure
range 7~69bar limited by sensor, gauge and safety-valve
(operating range from 5µHg). Temperature range -30~70°C.
Gas flow operating range from static to 10,000 cm/sec velocity.
Supplied with compact sample system with gauge, safety-valve,
sampling valves and fittings (¼” Swagelok). Data logging of
up to 100K moisture points, with infrared port and software for
download. Battery powered only (15-24h operation) with second
battery and charger (note charger is not IS).
Panametr cs mms35 A r/natgas mo sture Analyser
PAN,MMS35 AU
Intrinsically safe for compressed air systems and hydrocarbons
such as natural gas. Displays dew point & ppm moisture by
volume. Pressure set as a constant. Data logging with RS232 port
for download. Operating temperature range -110~70ºC. Pressure
range 5µHg~5,000psig. Accuracy 60~-60ºC ±2, -66~-110ºC
±3. Repeatability: 60~-60ºC ±0.5, -66~-110ºC ±1. Response
time

LIQUID FLOW METERS
env ronmental
Model Type Features Max Flow Temp °C Pipe Ø mm Major Application
GLO,FP101 Propeller flow counter Telescopic handle, Velocity
averaging, Digital counter
PAN,PT868 Ultrasonic; Transit time; Non-contact Data logging; RS232C;
4~20mA
PAN,PT878 Ultrasonic; Transit time; Non-contact Data Logging; IR interface;
Large LCD
4.5m/s 5cm min depth Rivers & streams, Irrigation
channels
~12m/s -20~150 50~2,000 Liquids, Energy flow, Low gas/solids
content, Pipes (clamp-on),
Note: NATA versions available
~12m/s -20~150 50~2,000 Liquids, Energy flow, Low gas/solids
content, Pipes (clamp-on),
Note: NATA versions available
PAN,C-LP-40NM Transducer set, PT868/878 -40~120 12~50 Small diameter pipes
PAN,C-PT-10HB Transducer set, PT868/878 -20~210 50~2,000 Wide temperature range
PAN,OKS Transducer set, PT868/878 -200~400 80~600 Very wide temperature range
PAN,2CHRT-1-1 Temperature sensors, PT868/878 -20~130 Clamp-on
PAN,2CHRT-1-2 Temperature sensors, PT868/878 -20~260 Clamp-on
POL,HYDRA-SX30-2 Ultrasonic; Doppler; Non-contact Dual frequency; Data logging;
RS232C, 4~20mA
UNI,6526B-21 Ultrasonic; Doppler Log rate 5s –1 week; Flow/
Depth/Temp
UNI,6526B-21LCD Ultrasonic; Doppler Log rate 5s –1 week; Flow/
Depth/Temp; LCD display
HYS,OSSB1 Propeller flow counter with fieldcomputer
Stainless fan, Adjustable depth,
storage & download
10m/s -40~122 12~5,000 Liquids, Slurries; High gas/solids
content; Pipes
~5m/s -0~60 Liquids, Slurries, Open Channel,
Logging System
~5m/s -0~60 Liquids, Slurries, Open Channel,
Logging System
5m/s Water Current Measurements,
Hydrology
63

64
LIQUID FLoW meteRs
Global FP101 D g tal Water Veloc ty meter
GLO,FP101 AU
Portable flow probe - current meter for water velocity
measurements in streams, channels and partially filled pipes.
Propeller sensor in 50mmØ housing, fitted to telescopic handle
[1.8m] with gauging marks to 900mm depth. Digital LCD
flowmeter display for instantaneous liquid velocity and average,
maximum, stopwatch or clock. Minimum depth about 50mm.
Range 0.1~4.5m/s ±0.05.
Hydrolog cal serv ces Un versal current
meter oss-B1
HYS,OSSB1 AU
Water current meter for measurement of flow velocity in rivers,
streams, channels and open water. Robust streamlined stainless
body fitted with high precision 100mmØ fan [flow range
0.025~5m/s]. Set of stainless wading rods for depths to 3m.
Rechargeable “Hydromate” ruggedised field computer with IP65
case. Storage of fan calibration formulae for direct readout of
volume-flow. Touch screen entry for set up, input, storage and
download. Supplied with PC download software and cable.
Panametr cs Pt868 Ultrason c Flowmeter
PAN,PT868 AU
Portable non-contact liquid flowmeter using transit-time principle.
Includes transducers for pipe diameters 50mm~2m and
temperatures -10~50°C [additional transducers available] with
clamping fixture. Flow velocity range 0.03~12.2m/s. Accuracy
typically 1%. Data logging capacity. Analog [current loop] and
RS232C outputs, and analog inputs compatible with temperature
transmitters for energy-flow calculations. Totalised flow and trend
analysis. Rechargeable (NiCd) operation for 8~10h or operation
from ac mains or external dc 10~28V supply.
Panametr cs software for PAn,Pt868 & PAn,mms35
PAN,SOFTWARE AU
Software for PAN,PT868 flowmeter and PAN,MMS35 moisture
analyser. Allows storage, recall and download of instrument
setup routines. Versions available to match instrument firmware
revisions.
Panametr cs Pt878 Ultrason c Flowmeter
PAN,PT878 AU/NZ/MY
Portable non-contact liquid flowmeter using transit-time principle.
Includes transducers for pipe 50mm~2mØ & temperatures
-10~50°C (various alternative transducers available) with
clamping fixture. Flow velocity range 0.03~12.2m/s. Accuracy
typically 1%. Data logging for over 100K data points. Analog
inputs compatible with temperature transmitters for energy-flow
calculations. Outputs analog 4~20mA, digital (pulse or frequency)
and printer/computer (Infrared port). Large LCD display for
velocity, volumetric and energy flow rate, totalised flow and trend
data in alphanumeric and graphical formats. Rechargeable NiMH
batteries and ac power supply/charger.
Panametr cs Pt878 Ultrason c Flowmeter w th
nAtA cert ficat on
PAN,PT878-NATA AU
Portable non-contact liquid flowmeter using transit-time principle.
Includes transducers for pipe 50mm~2mØ & temperatures
-10~50°C (various alternative transducers available) with
clamping fixture. Flow velocity range 0.03~12.2m/s. Accuracy
typically 1%. Data logging for over 100K data points. Analog
inputs compatible with temperature transmitters for energy-flow
calculations. Outputs analog 4~20mA, digital (pulse or frequency)
and printer/computer (Infrared port). Large LCD display for
velocity, volumetric and energy flow rate, totalised flow and trend
data in alphanumeric and graphical formats. Rechargeable
NiMH batteries and ac power supply/charger. Includes NATA
certification.
Panametr cs 12~50mm transducers
PAN,C-LP-40NM AU/MY
Transducer pair for PAN,PT868/878 transit-time flowmeter to suit
pipe 12~50mmØ. Complete with CF-LP-50M mounting bracket.
Temperature range -40~120°C.
Panametr cs -20~210°c transducers
PAN,C-PT-10HB AU
High temperature transducer pair for PAN,PT868/878 transit-time
flowmeter. Operates on pipe sizes 50mm~2mØ. Working
temperature range -20~210°C.
Panametr cs -200~400°c transducers
PAN,OKS AU
Very high temperature, wide range transducer pair for
PAN,PT868/878 transit-time flowmeter. Temperature range
-200~400°C, for pipe 80mm~600mmØ. Uses special clamp
system supplied. Appropriate protection and safe-handling
equipment is required for fitting and operation at very high or low
temperatures.
Panametr cs 2-cH RtD tX for Pt868/878 energy
calcs
PAN,2CHRT-1-1 AU
Two channel 4~20mA RTD transmitter, range -20~130°C for
energy rate and consumption measurements with PAN,PT868 or
PAN,PT878 ultrasonic flowmeters. Provides supply and return
temperatures for flowing liquid. Panametrics cable and connector
supplied. Fitted with pair of clamp-on Pt100 RTDs and cables.
Powered from flowmeter.
Panametr cs 2-cH tX for Pt868/878 energy calcs
PAN,2CHRT-1-2 AU
Two channel 4~20mA RTD transmitter, range -20~260°C for
energy rate and consumption measurements with PAN,PT868 or
PAN,PT878 ultrasonic flowmeters. Provides supply and return
temperatures for flowing liquid. Panametrics cable and connector
supplied. Fitted with pair of clamp-on Pt100 RTDs and cables.
Powered from flowmeter.
Polyson cs Hydra sX30 Dual Freq
Doppler L qu d Flowmeter
POL,HYDRA-SX30-2 AU
Dual frequency Doppler ultrasonic non-contact flowmeter. Velocity
range 0.06 to 10m/sec, accuracy ±1%. Pipe size range
12~5,000mm diameter. Data logging for 90,000 points, with PC
software and interface cable for download via RS232C interface.
Transducer temperature range -40~122°C. Analog output
4~20mA. Battery operated, 12h continuous use (8hr recharge).
Un data open channel L qu d Flow Logger
UNI,6526B-21 AU
Open channel flow logger, programmed in-situ for flow-channel
profile (laptop PC required). Measurement of flow-velocity
(by Doppler), depth (by pressure) and temperature. Includes
10m cable. Memory 120k, RS232 interface. Log rate 5
sec~1 week. Operating temperature range 0~60°C. Velocity
21~5,000mm/sec ±2% (resolution 1); depth 0~2,000mm
±2% (resolution 2). Temperature: -17~60°C (resolution 0.1).
Programmable output to control devices such as water samplers.
Detects and measures reverse flows. Charger and batteries
supplied. Workhead size 290 x 70 x 25mm.
Un data open channel L qu d Flow Logger w th
LcD module
UNI,6526B-21LCD AU
Open channel flow logger with field LCD display module and
10 m cable (2m depth rating). Measurement and logging of
flow-velocity (by Doppler), depth (by pressure) and temperature.
Programmable for flow-channel profile (laptop PC required for
in-situ programming via RS232C). Operating temperature range
0~60°C. Velocity 21~5,000 mm/sec ±2%; depth 0~2,000
mm ±2%. Temperature: -17~60°C ±0.1; log-interval 5 sec~1
week; memory 120k. Programmable output to control devices
such as water samplers. Detects and measures reverse flows.
Charger and batteries supplied. Workhead dimensions 290 x 70
x 25mm.

GAS FLOW METERS
Model Type Features Max Flow Temp °C Pipe Ø mm Major Application
KUR,2443-24 Thermal mass-flow Cold tap fittings, RS232C, Logging, 4 12,000sfpm -40~200 50mm~ Gases
insertion meter ~ 20mA output
PVL,CLIMA3 Insertion micro-turbine Hot-tap rig, RS232, Pressure 40m/s -20~80 ~150mm (450mm Compressed air
transducer
without hot-tap)
SIE,S100-5 Mass-flow thermal “Dial-A-Gas” for 10 gases, RS232C, 5slpm ¼” (at meter) Low – flow gases
sensor
Analog outputs
TSI,4040-6 Mass-flow thermal Temp measurement, RS232C, ~300slpm 0~50 In-line 22mm ISO Clean air flow, Use as
sensor
Mains/battery
calibrator
TSI,4143-6 Mass-flow thermal Temp measurement, RS232C, 0.01~20slpm 0~50 In-line 9.5mm Clean air flow, Use as
sensor
Mains/battery
calibrator
GAs FLoW meteRs
cl maA r 3 Flow meter for compressed A r & Gases
PVL,CLIMA3 AU
Portable gas flowmeter for compressed air and other applications.
Fitted with “Combisensor” insertion probe for simultaneous
measurement of flow, pressure and temperature. Measuring
ranges flow 0.06~40m/s, pressure to 15Bar, temperature to
-20~80ºC. Supplied with valve and adaptor-kit for hot-tapped
pipes approx 25~150mm ID, and fitting-kit for pipes to 450mm.
Flow computer functions include flow correction, volumecalculation,
and data logging for about 15,000 values. With
RS232 interface and cable, and software for data download.
Rechargeable with AC adaptor.
Kurz 2443 A r Veloc ty meter
KUR,2443-24 AU
Portable air velocity meter and flow-computer. Velocity range
0~12,000sf/min (60m/s) at pressures to approx 10bar
(probe rated to 20bar). Temperature range -40~200°C with
compensation. User selected English or metric units for velocity
or mass-flow. Thermal sensor probe 9.5mmØ & 330mm long
with sensor-shield, with compression fitting and nylon ferrules for
probe removal or position adjustment in tapped pipe. Suitable for
use in ducts or pipes, min pipe 50Ømm. Calibrated for air, and
suitable for use with other non-hazardous gases. Recording of
up to 1,500 data sets with time and date. Two analog 4~20mA
outputs, and RS232C serial port for configuration upload and data
download. Rechargeable NiMH batteries.
s erra ser es 100 Gas mass-flowmeter 0~5l/m n
SIE,S100-5 AU
Smart-Trak mass flowmeter. Digital display of mass flow rate for
gases in the range 0~5l/min. Dial-A-Gas set up for direct readout
of flow for 10 different common gases without adjustment or
recalibration. Analog and serial RS232 ports, with software and
cable provided for connection to PC. Portable configuration with
case, battery, ac power supply and flexible gas connection set.
tsI Portable mass Flowmeter & cal brator
0~300 sLPm
TSI,4040-6 AU
Thermal mass flowmeter or field calibrator for operation in the
range 0~300SLPM (standard litres/min). LCD display for flow,
temperature and pressure . Suitable for flow measurements on
clean air, or for calibration checks on personal sampling pumps.
Accuracy ±2%/0.05SLPM [whichever is greater] for air or oxygen
[±3%/0.10SLPM for nitrogen or air-mixtures]. Operating pressure
range 50-199kPa absolute [approx 95kPa gauge]. With HEPA
filter, adaptor and tubing. RS232C/analog connector with cables
supplied. AC adaptor or battery operation.
tsI Portable mass Flowmeter & cal brator
0.01~20 sLPm
TSI,4143-6 AU
Thermal mass flowmeter or field calibrator for operation in the
range 0.01~20SLPM (standard litres/min). LCD display for
flow, temperature and pressure . For flow measurements on
clean air, or for calibration checks on personal sampling pumps.
Accuracy ±2%/0.005SLPM [whichever is greater] for air or
oxygen (±3%/0.010SLPM for nitrogen or air-mixtures). Operating
pressure range 50-199kPa absolute [approx 95kPa gauge]. With
HEPA filter, adaptors and tubing. RS232C/analog connector with
cables supplied. AC adaptor or battery operation.
65

66
AIR FLOW MEASUREMENT/AIR QUALITY
AIR FLOW MEASUREMENT/AIR QUALITY
Model Type Air Velocity
m/s
SHO,CFM88-3 Balometer 12~944
Flow l/s Max
Temp °C
TSI,8370 Balometer 15~1,000 60
TSI,8371 Balometer 15~1,000 60
Pressure Functions Notes
TSI,8373 Balometer 15~1,000 60 Logging
TSI,8375 Accubalance modular air
balancing tool
0.13~41
depending on
probe
11~1,000 ±3735Pa diff;
135kPa abs
DRU,DPI705 Manometer (electronic) 0~20 kPa Analog output
Logging Hood, Pitot, Velocity Matrix
SHO,ADM-860 Manometer (electronic) ~50 0.025~14,700Pa With Velgrid
AIR,DM2 Manometer (digital) ±200kPa Recorder output
DPM,TT370S Manometer (digital) 1.2~100 99.9Pa; 999Pa;
7.0kPa
DPM,TT570CL Manometer (digital) 10~100 10~100 99.9Pa; 999Pa;
7.0kPa
Logging RS232C
Without Pitot tube
TSI,8705 Manometer (digital) Logging RS232C Pitot Tube
TSI,8710 Manometer (digital) 10~100 3735Pa Logging RS232C Static Tip, Pitot Tube, Velocity
Matrix
TSI,8345 Anemometer (hot wire) 0.15~30 93 Logging RS232C
TSI,8355 Anemometer (hot wire) 0.15~30 93 Logging RS232C
TSI,8384 Anemometer (hot wire) 0.1~50 60 Logging RS232C
TSI,8324 Anemometer (vane, 100 mm) 0.25~30 80 Logging; Max, Min &
Sweep
AIR,AV2 Anemometer (vane, 100 mm) 0.25~30 70 Analog output; Logging
RS232C
AIR,AV6 Anemometer (vane, 100 mm) 0.25~30 70 Analog output; Logging
RS232C
SCH,MINI-2 Anemometer (vane, 22 mm) 0.3~40 Analog output; Logging
RS232C
TES,445 Anemometer (vane, 16mm) 0.4~60 140 Logging; Ma, Min &
Mean
TES,450 Anemometer (vane, 16mm) 0.4~40 130 Results averaging
Min/Max display
Articulated telescopic
extension
NATA version available
Micro-vane probe
Telescopic probe
AIR,UA30 Anemometer (vane, 16mm) 0~30 Low flow turbulence; Reads
to 0.001 m/s
KUR,2443-24 Air Velocity Meter 0~60 200 10*/20bar Logging Flow – computer; With
pipe-fittings*
Model Type Temp °C RH% CO ppm CO2 ppm NO ppm Dust & Aerosol Notes
TSI,8520 Particle measurement 0.001~100mg/m3;
0.1~10µ
ABA,301 Particle measurement 0.3~5µ Logging
TSI,8525 Ultra fine particle measurement 0.01 ~ 5x105 particles/
cm3; 0.02~1µ
Logging, TSI,8520-1
Outdoor enclosure
TSI,8386A Multifunction air quality meter 60 5~95 Logging, Wet bulb, Dew
point, Differential pressure
TSI,8554 Multifunction air quality logger Logging, RS232C/Software
YES,205-5 Multifunction air quality logger 50 5~95 200 10,000 300 Logging, RS232C/Software
TES,635 Humidity & dewpoint meter Robust stainless probe
TES,635-2 Humidity & dewpoint meter Robust stainless probe
TES,645-1 Humidity & dewpoint meter 120 2~98 Robust stainless probe
CAS,MICROTHERM Area heat stress monitor air: 60°;
wet: 40°;
globe: 120°
Logging
WBGT indes, RH &
Dewpoint;

AIR FLoW meAsURement/AIR QUALItY
css Portable smoke Generat ng mach ne
CSS,COLT4 AU
Portable smoke generator with variable smoke emission rate.
Suitable for air flow visualisation, HVAC ductwork leak-testing, fire
training and general work. Pump-free operation with smoke fluid
supplied from consumable aerosol cans or refillable containers
[pump supplied for pressurisation]. Manual or continuous
operation and off-power facility. Maximum output 31 cubic
meters/min at 1.5m visibility. Operation for 18min from one can
at maximum capacity.
A rflow eDm2500 electron c manometer 0~2500 Pa
AIR,EDM2500 NZ
Pressure ranges 125, 500 & 2,500Pa. Air velocity measurement using pitot-static tube with
ranges 14 & 28m/s. Supplied complete with pitot static tube, balancing valve, and tubing.
Fitted with 1mA fsd recorder output. Battery operated.
A rflow Dm2 med um Pressure manometer
AIR,DM2 NZ
Handheld medium pressure digital manometer. Suitable for positive, negative and differential
pressure measurements. Displays readings in mBar, kPa & psi. Ranges are ±2,000mBar,
200kPa & 29.99psi. Resolution is 1 or 0.1mBar & 0.1 or 0.01kPa. Accuracy on all ranges
is 0.5% of reading. Serial interface for uploading stored results. Maximum stored readings
during logging is 700. Analogue output of ±1V at 0.5mV per mBar.
A rflow 36 P tot tube
AIR,PITOT-36 AU
Pitot tube (36”) for use with manometers and micro manometers.
tsI 8710 DP-cALc D fferent al m cro-manometer
TSI,8710 AU
Micro-manometer for static or differential pressure, velocity,
volumetric flow, atmospheric pressure and temperature. With
statistical analysis, density correction, K factor and automatic
actual/standard flow calculation. Differential pressure range
±3735Pa. Velocity display to 78m/s (range depends on probe).
Supplied with static tip, Pitot tube, velocity matrix and temperature
probe. Datalogging (1,000 point) with RS232C interface and
software. Rechargeable cells or AC adaptor.
tsI 8705 DP-cALc D fferent al m cro-manometer
TSI,8705 AU
Differential micro-manometer measuring differential pressure,
velocity, average, volumetric flow, maximum and minimum. With
static pressure calculations, density correction and K factor.
Pressure range -1245~3735Pa. Velocity range 1.27~78.5m/s.
Supplied with 200~980mm telescopic pitot tube. Datalogging
(1000 point) with RS232C interface and software. Battery
powered.
DPm tt370s D g tal manometer
DPM,TT370S NZ
Digital micromanometer with an extendable pitot tube kit. DP ranges are 199.9Pa, 1,999Pa &
7kPa. Velocity range with pitot kit is 1.2~100m/s. DP accuracy is 1% of reading +2 counts.
Recorder output of 1mV per count.
DPm tt570cL D g tal manometer nAtA cert ficat on
DPM,TT570CL-NATA NZ
Digital micromanometer with an extendable pitot tube kit. DP ranges are 199.9Pa, 1,999Pa &
7kPa. Velocity range with pitot kit is 1.2~100m/s. DP accuracy is 1% of reading +2 counts.
Built-in data logger holds 1,400 readings.
Druck DP1705 manometer 0~20 kPa
DRU,DPI705 AU
Handheld digital manometer range 0~20kPa, accuracy 0.2 %. Displays all common
engineering units.
shortr dge ADm-860 electron c manometer
SHO,ADM-860 MY
Electronic micro manometer for air balance and similar
applications. Measures differential pressure, air velocity and
temperature. Differential pressure range 0.0025~1,500mm
wg. Velocity range 7.5~3,000m/min (750m/min with velgrid).
Memory 100 point with sum and average. Accessories include
pitot tube and 16 point velgrid for face velocity work including
exhaust hoods, clean room outlets, and large filters or coils.
Kurz 2443 A r Veloc ty meter
KUR,2443-24 AU
Portable air velocity meter and flow-computer. Working velocity
range 0~12,000 sf/m (60m/s) at pressures to approx 10bar
(probe rated to 20bar). Temperature range -40~200°C with
compensation. Selectable English or metric units for velocity or
mass-flow. Thermal sensor probe 9.5mmØ x 330mm long with
sensor-shield. Compression fitting and nylon ferrules for probe
removal or position adjustment in tapped pipe. Suitable for use in
ducts or pipes, min pipe 50mmØ approx. Calibrated for air and
suitable for use with other non-hazardous gases. Recording of
up to 1,500 data sets with time and date. Two analog 4~20mA
outputs, and RS232C serial port for configuration upload and data
download. Rechargeable NiMH batteries.
tsI 8370 Accubalance Balometer
TSI,8370 MY
Balometer including 5-hood kit and hard case. Flow range 15~1,000 litres/sec
(50~3,500m 3 /hr) accuracy ±5%, reading ±2.4 l/s (8.5m 3 /hr). Operating temp range
0-60°C. Weight (610x610mm hood) 3.4 kg hood provided 610x610mm (standard),
610x1220mm, 305x1220mm, 305x1525mm and 915x915mm.
tsI 8371 Accubalance Balometer
TSI,8371 NZ
Airflow hood 610 x 610mm. Measures air volume flowing through registers, diffusers, and
grilles. Range is 15~1,000l/s, accuracy is ±5%. Temperature range is 0~60ºC. Sample
and hold function displays reading of one sample. Automatic conversion between actual and
standard flows when user initially inputs temperature and barometric pressure, variable time
constant modes available for a steady display when measuring fluctuating flows, K factor
function enables flexibility for measuring a variety of diffusers, back-lit display is easy to read in
poor lighting conditions.
tsI 8373 Balometer W th Logg ng
TSI,8373 AU
Flow range 15~1,000L/s (50~3,500m3/hr); accuracy ±5% [to ±2.4L/s]. Operating
temperature range 0~60°C. Includes 5 hood kit & hard case. Hoods provided 610 x
610mm (standard), 610 x 1,220mm, 305 x 1,220mm, 305 x 1,525mm & 915 x 915mm.
tsI 8375 Accubalance modular A r Balanc ng
TSI,8375 NZ
Balometer with detachable micromanometer for air balancing applications. 610 x 610mm air
capture hood for measurements in the range 42~4,250m3/h with automatic compensation for
barometric pressure and air temperature, 450mm pitot probe (range 0.13~41m/s), 16-point
velocity matrix probe (0.13~13m/s) and static pressure probes (differential pressure range
±3,735Pa with safe limit 37kPa, absolute pressure range 47~135kPa). Accuracy typically
2% for pressure, 3% for flow. Large, multi-line backlit LCD display for single or statistical
readings with min, max and average of up to 1,000 values of each measured parameter.
Manual result storage or automatic data logging up to 1,000 time/date stamped readings.
RS232 port for data transfer to PC or serial printer, with cable and “LogDat” download software.
Rechargeable with approx 12h operation, or ac adaptor.
shortr dge cFm88-3 electron c Balometer
SHO,CFM88-3 AU
Measures supply and exhaust flow in cfm and l/sec. Ranges 25~2500cfm supply and
25~1500cfm exhaust. Compensated for air density and back pressure. Hood sizes 600 x
600mm, 600 x 1,200mm & 300 x 1,200mm.
A rflow AV2 100mmØ Anemometer w th Volume d splay
AIR,AV2 AU/NZ
Vane anemometer with 900mm (35”) telescopic probe extension.
Velocity measurement range 0.25~30m/s (50~6,000ft/min).
Averaging mode available. Volume display based on duct or other
area. Head operating range -10~70°C (lower limit of -30°C for
short periods). Output 0~1V.
A rflow AV2 100mmØ Anemometer nAtA cert ficat on
AIR,AV2-NATA AU
Specification as above but with NATA certification.
A rflow AV6 100mmØ Anemometer w th Volume
AIR,AV6 NZ
Vane anemometer 100mmØ with articulating extension handle. Measures velocity, volume
flow and temperature. Vane head operating range is -10~70ºC, -30 possible for short
periods. Accuracy is ±1% of reading +1 digit. Resolution is 0.01 m/sec. Velocity range is
0.25~30m/s. RS-232C interface for data logging & real time data retrieval. Stores up to 99
readings of velocity & temperature. Analogue output of 0~1v.
sch lknecht m n A r 2 Vane Anemometer
SCH,MINI-2 AU
Probe 22mmØ. Range 0.3~40m/s. Min, max & time averaging functions with 0~1V analog
output.
67

68
AIR FLoW meAsURement/AIR QUALItY contInUeD
testo 445 Vane Anemometer w th 16mm vane
TES,445 AU
Micro-vane probe. Simultaneous digital display of air velocity and
temperature, with continuous-update, max, min & mean functions.
Volume-flow option with entry of duct dimensions .Telescope
mounted metal probe, vane 16mmØ. Operating range 0.4~60
m/sec, accuracy ±0.2m/s, ±1%mv up to 40m/sec. Temperature
range -30~140ºC for short-term measurements. Selectable sitelocations,
and 3,000 point internal memory for manual saving or
automatic data logging. Battery powered.
testo 450 Vane Anemometer w th 16mm Vane
TES,450 AU
Anemometer with micro-vane probe. Digital display of air velocity and temperature. Telescope
mounted metal probe, diameter 16mm. Operating range 0.4~40m/s ±0.2 and to 60m/s
±unspec. Temperature range -30~140°C for short-term measurements. Battery powered.
tsI 8345 Hot W re Anemometer
TSI,8345 AU
Thermal anemometer range 0.15~30m/s; accuracy ±3%;
volumetric flow display; averaging capability up to 255 readings.
Probe operating temperature range -17.8~93.3°C. Probe
98mm long x 6mmØ at tip. Digital display. RS232C printer
interface. Battery or mains operation.
tsI 8355 Hot W re Anemometer
TSI,8355 MY
Range 0.15~50m/s. Probe will operate over a temp range of -17.8~93.3ºC. Digital
display with averaging capability of up to 255 reading. Temperature measurement range
-17.8~+93.3 C RS 232 printer interface. Battery & AC operation.
tsI 8384 Hot W re Anemometer
TSI,8384 NZ
Handheld hot wire anemometer. Velocity range is 0.1~50m/sec, accuracy is ±3% of reading
or ±0.015m/s whichever is greater. Resolution is 0.01 m/s. Probe temperature range is
-10~60ºC and 0~80%RH. Stores 1,394 samples of velocity, volumetric flow-rate and
temperature with time and date stamping. Data can uploaded to a PC or printed. Supplied
with 10mmØ x 1m telescopic probe.
tsI 8324 Veloc calc 100mm Vane Anemometer w th
Volume D splay
TSI,8324 AU
Vane anemometer with 100mm head, supplied with handle and 900
mm articulated telescopic extension. Velocity measurement range
0.25~30 m/s ±1%; temperature measurement range 0~80ºC
±0.5 ºC. Volume display range 0~4.36x106m3/h with input for
circular or rectangular duct dimensions. Variable time-constant; sample
statistics average, max and min; and “sweep” mode for extended
continuous sampling. Internal memory for single point measurements
or time-based data logging, for up to 2849 samples and 1000 test
IDs, with serial interface, cable and software for data download. Direct
data acquisition [polling] from PC terminal modes. Battery powered
with auto-power-off, and optional AC adaptor.
tsI 8386A Veloc calc A r cond t on ng effic ency meter
TSI,8386A AU
Portable efficiency measurement system for HVAC and related work, with hot wire anemometer,
static and differential pressure, temperature and humidity measurement with heat flow efficiency
calculation. Velocity (hot wire) 0~50m/s, accuracy ±3.0%. Temperature -10~60°C, accuracy
±0.3. Wet bulb temperature 5~60°C. Relative humidity 0~95%RH, accuracy ±3%. Dewpoint
-15~49°C. Static/differential pressure -1,245~3,735Pa, accuracy ±1%. Probe length 100cm,
tip diameter 7mm, base diameter 10mm. Includes data logging and printing. Battery operated.
A rflow UA30 H gh Resolut on Ultrason c
Anemometer 0~30m/s
AIR,UA30 AU/NZ
Precision anemometer range 0~30m/s, accuracy better than 1% of
reading, resolution 0.001m/s, non-directional. Temperature range
0~70°C, accuracy 1°C, resolution 0.1°C. Flow turbulence range
0~99%. Capable of measuring very low air velocities. Includes
articulating telescopic rod 0.4~1.1m. Logs up to 99 readings of
velocity, temperature and turbulence, intervals 1s~99min. RS232C
interface. Operates for 20h on alkaline batteries.
testo 635 Hum d ty & Dewpo nt meter
TES,635 NZ/MY
Temperature, humidity and dew point meter. Probe temperature range is -20~70ºC. Humidity
range is 0~100%RH resolution: 0.1%, accuracy is ±2%. Dew point range is -50~40ºC.
testo 635-2 Hum d ty, temperature & Dewpo nt meter
TES,635-2 AU
Portable humidity meter fitted with robust stainless probe with
sintered filter-cap for general or duct measurements to 120ºC,
and fast-action K-type surface temperature probe. Displays
relative humidity, absolute humidity, dew point, degree of
humidity, enthalpy, temperature, and differential temperature
(dewpoint~surface). Operating range 2~98%RH (±2%). Air
temperature -20~120ºC (±0.2/0.5). Surface temperature
-60~300ºC (±0.1). Internal memory for 10,000 values with
USB interface, cable and software for download and presentation.
Battery operated.
testo 645 Hum d ty & Dewpo nt meter
TES,645-1 AU
Portable humidity meter fitted with robust stainless probe for ambient work or duct
measurements to 120°C. Displays relative humidity, absolute humidity, dew point, degree
of humidity, enthalpy and temperature. Operating range 2~98%RH [±2%], -20~120°C
[±0.4/0.5]. Battery operated.
Abacus Hand-held A rborne Part cle counter
ABA,301 AU
Portable particle measuring system typically used in clean room applications. 4 x fixed size
channels 0.3, 0.5, 1.0 & 5.0micron. Count data automatically stored in a 500 sample
memory which can be downloaded to a PC. Selectable sample time. Includes zero count filter
for checking backgrounds. When used with included software will check clean rooms to ISO
14644 and BS5295 requirements. Battery operated.
Va sala WAA151 W nd speed/D rect on transducer
VAI,WAA151 AU
Range 0.4~75m/s. Current output with selectable ranges including 4~20mA & 0~20mA.
Requires indicator module such as DE,DT600 datalogger for indication of windspeed and
direction.
tsI Q-trak plus Indoor A r Qual ty mon tor w th Logg ng
TSI,8554 AU/NZ
Indoor air quality (IAQ) monitor for temperature and humidity
measurements, CO and CO 2 concentrations. Humidity range
0~95%, temperature range 0~50°C. Electrochemical cell for CO
0~500ppm. NDIR cell for CO 2 0~5000ppm. Data logging for
48,671 data points with interval adjustable 1s~1h. Fitted with
RS232 interface, and software included for download, storage and
reporting. Battery or mains operation with ac adaptor.
Yes 205-5 Indoor A r Qual ty mon tor w th Logg ng
YES,205-5 AU
5 channels for temperature, humidity, CO 2 , CO & NO 2 . Temperature range 0~50°C, resolution
0.1, accuracy ±0.5. Humidity 5~95 %RH, accuracy ±2%. CO 2 0~10,000 ppm, resolution
0.5ppm. CO 0~200 ppm, resolution 0.5ppm. NO 2 0~300 ppm, resolution 0.5ppm.
Logging of CO and NO 2 allows checking of indoor air for contamination by vehicle emissions
from nearby carparks, loading docks etc. Includes interface and software. Mains/battery
operation.
casella m crotherm WBGt Area Heat stress mon tor
CAS,MICROTHERM AU
Portable area heat stress WBGT monitor with real-time graphical display. Measures heat stress
potential [WBGT index] according to ISO7243. PRTD sensors with internal calibration-reference
for wet-bulb, dry-bulb and globe temperatures. Large LCD display for numerical or graphical
indication of temperatures and processed values for WBGT [indoor/outdoor plus TWA], relative
humidity and dewpoint. Simple keypad/menu setup. Data logging for up to 32 separate
runs and 49,100 records, with interval 30s~1h. RS232C port with included PC software for
download and reporting or realtime display. Low water-level warning, and settable audible/
visible WBGT alarm. Handheld, free-standing or tripod-mount. Battery operated.
tsI 8520 Dusttrak A rborne Part cle mon tor
TSI,8520 AU/NZ
Portable aerosol monitor. Laser photometer with 90O scattering detection, Range:
0.001~100mg/m3 [Calibrated for A1 test dust, ISO 121203-1], resolution: 1% of reading or
0.001; particle size range: 0.1~10µm. Internal pump flow rate 1.4~2.4L/min (1.7 nominal).
Data logging 30,000 data points (21d@1min), log interval: 1s~1h. RS232C interface and
software included. Battery operated.
tsI 8520-1 env ronmental enclosure for Dusttrak
TSI,8520-1 AU
Weatherproof outdoor housing for TSI,8520 aerosol monitor. Rugged case with tripod mount,
fitted with sample inlet and water trap. Includes extended-life battery pack and charger/adaptor.
tsI 8525 P-trak Ultrafine Part cle counter
TSI,8525 AU
Range 0.01~5 x 105 particles/cm3. Particle size range 0.02 to greater than 1micron.
Includes PC software and cable. Suitable for detection of ultrafine particles associated with
pollutants. Battery powered [8h operation using alkaline batteries].

AIR conDItIonInG BALAncInG InstRUments
LeAKAGe DetectoRs
WeAtHeR stAtIons
testo 560-2 electron c man fold for Refr gerat on test ng
TES,560-2 AU
Three-way valve bank, for commissioning, maintenance and
repair of refrigeration systems. Stainless-steel block for use
with common pressure media including CFC, FC, N, CO 2 and
ammonia; with stored data (including saturation properties) on
36 refrigerants. Measurement of vacuum (0~200hPa), pressure
(0-50bar), ambient [case] temperature for compensation
(-10~50ºC) and system temperature (-100~400ºC instrument
range; supplied with pipe-wrap probe 0~120ºC). Calculations
for absolute/relative pressure, vacuum drying-efficiency, system
cooling/heating capacity, leakage testing, superheating or subcooling
values. Data storage, or interval-logging up to 100,000
readings, with serial interface and software for download, analysis
and documentation. Battery or AC adaptor powered.
tour & Anderson cBI Balanc ng meter
TA,CBI AU
Digital pressure balancing instrument with LCD display. For cooling
water valve balancing in air conditioning plants and similar applications.
Firmware revision 3A. Includes facility for entry of Kv value to allow
balancing of all hydronic valve types. Differential pressure range
-0.5~20.5m water gauge at a total pressure of less than 200m.
Resolution 0.001m. Flow resolution 0.001L/s. Battery operated.
Haloteck Refr gerant Gas Leak Detector
HAL,78000 AU
For use by refrigeration engineers. Rapid response 0.2s, audio
output, zero warm up time. Single control, battery operated, sensor
tip insensitive to draughts. Sensitivity better than 3g/y R12, 25g/y
R134A. Responds to halogenated hydrocarbons and many fire
extinguishant gases, [also sulphur hexafluoride SF6]. Battery life
30h. Duty cycle continuous. Probe length 240mm. Weight 280g.
Bacarach Leakator 10 combust ble Gas
Leak Detector
BAC,LEAK10 AU
Flexible probe with solid-state sensor for rapid area checks and
pinpointing of large or small leaks. Sensitive to combustible
vapours including common solvents, and gases including natural
gas. Adjustable sensitivity with detection limit approximately
20ppm [methane]. Indication by ultra-bright LEDs and audible
speaker. Battery powered.
Gascheck 3000 Portable General-Purpose
Leak Detector
ION,GASCHECK3000 AU
Micro thermal-conductivity sensor for high-sensitivity detection of
gases with a thermal conductivity different to that of air, including
helium, carbon dioxide, refrigerants, sulphur hexafluoride, natural
gas, etc in 5 groups. Direct reading of leak rate in ml/sec with
audio and visible signals. Detection limit for helium 2E-5ml/s.
Battery powered.
env rondata Weatherone W nd speed & D rect on
Logger
ENV,DL20WSD AU
Logging system for wind speed and direction. Tripod-mounted
cross-arm stand with 3-cup windspeed sensor range 0-75m/s
and independent vane direction sensor. Sealed dual-channel
logger with memory for 35,000 readings with time and date, fitted
with backup battery, rechargeable sealed main battery and solar
panel for in-field recharge. Power supply for charging or operation
from mains supply. “EasiAccess” software on CD for office or field
connection via RS232C compatible computer (not included),
for set-up, download and real-time operation, with functions for
tabular or graphical display.
env rondata Weathermaster 2000 Weather stat on
ENV,WM20 AU
Measures air temperature -15~50°C ±0.2, relative humidity 10~90%RH ±5%, rainfall
0.2mm resolution. Wind speed starting threshold 1kph. Wind direction resolution 6O ±3%.
One spare input channel. Capable of storing up to 3mths of data. Includes RS232 interface
and software for download. Mounts on star-picket. Solar-rechargeable batteries.
LIGHt & UV meAsURement
H ok Lux H tester D g tal Illum nance meter
HIO,3423 AU/MY
HIO,3423-NATA NZ
Manual switching and autoranging. LCD display with 3½ digits
(“1999”) for five measuring ranges to 20/200/2000lx in 1-count
steps, 20,000lx in 10-count steps and 200,000lx in 100-count
steps with accuracy ±4%. Response time in autorange mode
5sec (2sec in manual range mode). Autozero, hold and backlight
function with delay for taking readings in low light. Input for ac
power adaptor, connecting-cable to allow separation of sensor
unit and meter, and 200mVdc analog output with cable. Battery
powered.
extech D g tal L ght meter nata
EXT,407026 NZ
NATA calibrated portable digital light meter. Ranges; 2,000, 20,000 & 50,000 lux. Accuracy
is ±4%. Displays in foot candles or lux for tungsten, daylight, fluorescent, sodium or mercury
lamps. Data logging of measured values, Min/Max & Average, software and serial interface for
uploading results.
m nolta t-1 Lux meter
MIN,T-1 NZ
Microprocessor controlled digital light meter. Measuring time can be adjusted for accurate
readings of both continuous and flickering light sources. Illuminance deviation between sources
can also be determined, or integrated illuminance over a period of time can be calculated.
Range is 0.01~99,900lx. Accuracy is ±2%.
ILI 1400ABc Rad ometer for UV measurements
ILI,1400ABC AU
International Light model 1400 radiometer with backlit LCD
display, autozero and autoranging. Continuous reading with hold
function, or integrated “dose” measurement up to 24h. Smart
detectors with storage of units and detector-calibration data.
Analogue recorder output. Mains adaptor or battery power.
Supplied with three sensors: UV actinic hazard (UVC with B & A
components matched to OSHA requirements), range 2.50e-7
to 2.50e-3 W/cm 2 eff. UVB + A (total “solar” radiation), range
1.16e-7 to 4.07e-1 W/cm 2 . UVB, range 1.54e-6 to 1.54e-2
W/cm 2 .
m nolta cL-200 chroma meter for Illum nance &
colour measurement
MIN,CL-200 AU
Konica Minolta model CL-200 portable colour meter. LCD
display for illuminance, tristimulus values, chromaticity, correlated
colour temperature and colour difference. Illuminance range
0.1~99,990lx ±2%. Colour accuracy ±0.002 [xy] or ±20°K
[Tcp]. Fitted with RS232C interface. Battery powered, or AC
adapter.
topcon Bm-9 Lum nance meter
TOP,BM-9-2 AU
Portable luminance meter with digital display. Field-of-view 5O, measurement acceptance
angle 2O, with 10mm min spot diameter. Measuring distance 0.35m to infinity. Silicon
photodiode sensor with automatic or manual range selection. Measurement range
0.01~199,900cd/m 2 ±4% of reading. Built-in RS232C interface and analogue output.
Battery powered.
topcon Im-2D D g tal Luxmeter
TOP,IM-2D AU
Digital illuminance meter. Measuring range from 0.1~19,999lx. Accuracy ±5%, +1 digit.
Autoranging with silicon sensor. Battery operated.
topcon Im-2D Lux meter nAtA cert ficat on
TOP,IM-2D-NATA AU
Digital illuminance meter with NATA certification. Measuring range
from 0.1~19,999lx. Accuracy 5%, ±1 digit. Autoranging with
silicon sensor. Battery operated.
topcon Im-5 Lux meter nAtA cert ficat on
TOP,IM-5-NATA AU
Digital wide-range illuminance meter with NATA certification. Measuring range
0.01~199,000lx. Accuracy ±2% +1 digit. Autoranging with silicon sensor. Analog output
and RS232 interface. Battery operated.
69

70
NOISE & SOUND ANALYSERS
Model Description Type/Class Features RS232C Major Applications
BK,4443 Noise dosemeter (2) Built-in set up routines, 53,000 values Yes OH&S
BK,2237A Sound level meter 2 40 data records, ac output Yes OH&S; General
BK,2237A-NATA Sound level meter 2 NATA certificate, ac output Yes OH&S; General
RIO,NL-04 Sound level meter 2 ac & dc outputs Yes OH&S; General
RIO,NL-05 Sound level meter 2 Recorder outputs Yes OH&S; General
BK,2239A-NATA Sound level meter 1 NATA certificate, ac output Yes OH&S; General
RIO,NL-11FP Sound level meter 1 Octave filter,printer OH&S; General
RIO,NL31 Sound lever meter 1 1/1, 1/3 octave filter OH&S; General; Analysis
RIO,NL-32RTA-NATA Sound level meter 1 NATA certificate, Data logging, Realtime frequency analysis, (1/1,
1/3 octave), “Flashcard”
OH&S; General; Analysis
BK,2238E-NATA Sound level meter 1 Enhanced sound level meter firmware, Data logging, Frequency
analysis, NATA certificate
Yes OH&S; General; Analysis
BK,7815 Software n/a Compatible with BK4443, 2239A, 2238E-NATA n/a Advanced applications
ARL,EL-315 Environmental noise logger 2 7,500 data sets, DisplayWeatherproof Yes Long term outdoor logging
ARL,EL-316 Environmental noise logger 1 7,500 data sets, Display, Weatherproof Yes Long term outdoor logging
BK,2238NMT-KIT Environmental noise logger 1 25MB memory, Weatherproof, With sound level meter Yes Long term outdoor logging
IVI,IE35-2P Audio Analysis System 1 Includes PDA, real time analysis, FFT, signal generation, reverb,
General Analysis, Engineering,
“seat-to-seat”, PC download
Audiovisual
soUnD sIGnAL AnALYsIs
noIse & soUnD AnALYseRs
HP35660A 100kHz Dual channel spectrum Analyser
HP,35660A AU
401 line resolution. Displays frequency response, power
spectrum, linear spectrum, coherence, cross spectrum, power
spectral density, and time. Signal sources: fixed sine, random
noise, chirp. Built-in disk drive. HPIB plotter interface. Bandwidth
is 102.4kHz for single channel measurements and 51.2kHz for
dual channel measurements.
ARL eL-315 env ronmental no se Logger
ARL,EL-315 AU/NZ/MY
Environmental noise logger with display for field-reading of
summary results. Portable, self-contained and weatherproof.
Continuous 90dB dynamic range, frequency weightings A and
C. Monitors environmental noise continuously for up to 3 weeks,
calculates and stores over 7500 sets of Ln indices. PC required
to set up system and download data using software supplied. Set
up also possible from front-panel.
ARL eL-316 env ronmental no se Logger type 1
ARL,EL-316 AU
Environmental noise logger with display for field-reading of
summary results. Portable, self-contained and weatherproof. Type
1 performance, continuous 90dB dynamic range, fast response,
frequency weightings A and C. Monitors environmental noise
continuously for up to 3 weeks, calculates and stores over 7500
sets of Ln indices. PC required to set up system and download
data using software supplied. Set up also possible from frontpanel.
Iv e Ie-35 type 1 Aud o Analys s systems
IVI,IE35-2P AU
Audio Analyser with Dell Axim X51v PDA. Fitted with half-inch
free-field Type 1 microphone and pre-amplifier. Functions include
SPL (sound level), Real-time analysis, “seat-to-seat” variation for
audio setup, reverberation measurement, “strip-chart” recording on
display, voltage and oscilloscope displays and signal generation.
Supplied with field-calibrator, microphone extension cable, spare
battery and software for data-download to PC. SPL facilities
include time and frequency weightings - fast, slow, peak or
impulse and A, C or Flat. FFT based Real Time Analysis includes
1/1, 1/3, or 1/6 octave bands with a maximum resolution
of about 1/24 octave. Additional functions include spectrum
subtraction, averaging, Noise Critera or Reduction contours and
reverberation-decay to ISO-20 and ISO-30. Signal-generation
includes sine, square, triangle and white or pink noise.
B&K no se mon tor ng term nal w th model 2238F sLm
BK,2238NMT-KIT AU
Noise logging system with B&K model 2238F Class 1 Sound
Level Meter equipped with internal software for Basic SLM
and Logging. Portable, wheeled weatherproof case. Standard
SLM operation for fast, slow and impulse time weighings and
A, C or linear frequency weightings RMS. Linear or C frequency
weightings for peak detection. Internal memory 2MB total for
logging up to 12 parameters including auxiliary signals. Fitted
with serial RS232 interface, and provided with BKlink software
for download of logged data to PC. Supplied with field calibrator,
charger and 12V, 18Ah battery, for operation for up to 14 days
logging at 15min intervals.
B&K 4443 no se Dose meter w th Logg ng
BK,4443 AU/NZ
Fitted with remote microphone, for OH&S surveys. Logging of
1 or 2 parameters from a range of 6, with variable interval. 4
built-in and 3 user-defined setup routines, 5 selectable statistical
levels Lx. Storage of up to 53,000 values over 16 measurement
periods, and download [or setup] via PC using software provided.
Supplied complete with field calibrator. Battery powered.
B&K 2237A type 2 Integrat ng sound Level meter
BK,2237A AU
Measures RMS and peak simultaneously. Linearly weighted
analogue output for sound recording, 0~0.5V ac (rms).
Measurement range 30~140dB. Time weightings fast, slow &
impulse. Independent frequency weightings A [for RMS readings
SPL, MaxL, MinL, Leq, Inst] and C [for peak readings Peak and
MaxP]. Real time clock for time and date stamp. Records 40
measurements for download to PC. Calibrator included. Battery
operated.
R on nL-04 sound Level meter
RIO,NL-04 MY
Meets IEC type 2. Five measurement functions: Lp(SPL),
Leq, LAE, Lmax & Lx(L5,L10,L50,L90,L95). 6 automatic
measurements & data store. Built-in RS232C interface for
computer communication. 70dB dynamic range (digital display),
27~130dB (A) measuring range. Wide range of time settings
for Leq, LAE, Lmax & Lx;10s,1,5,10, 15, 30min,1, 8, 24h
& manual time setting (up to 99h 59min 59s). RMS: fast,
slow,10ms. 4 digit LCD display, 0.1dB resolution, updated every
second, plus 60dB analog display display 1dB resolution showing
the instantaneous value. Memory battery back-up. AC & DC signal
o/p for level expanding system by optional filters, memory card &
others.

noIse & soUnD AnALYseRs contInUeD
R on nL-05 type 2 sound Level meter
RIO,NL-05 AU
Sound level meter to IEC 651/1979 & IEC 804/1985 type 2
requirements. Measures Lp, Lmax, Leq, Lae. Response types
A, C, and flat. Fast and slow time weightings. Complete with
calibrator. Internal memory and print-out for Leq data (printer
CP-10 optional, also prints other parameters), RS232C interface.
Recorder outputs 1V ac rms & 3.5V dc. Operates from batteries
or ac adaptor.
R on nL-11FP sound Level meter system
RIO,NL-11FP MY
Sound level meter complete with type NX-01A octave filter,
CP-01 printer, & calibrator. Measures Leq, Le (Lax), Spl and time.
Weighting filters A, C, and flat. Detector reads fast, slow, impulse,
and peak (IEC 651). Measurement range 29 ~140 dB rms.
B&K 2239A type 1 sound Level meter nAtA
cert ficat on
BK,2239A-NATA AU
Type 1 (class 1) integrating sound level meter with backlit LCD
display, NATA certification. Simultaneous rms (A,C) & peak (C)
detection with independent frequency weightings. Measuring
range 30~140dB. Time weightings fast, slow and impulse.
Parameters Leq, MaxP, MaxL, MinL, Peak, SPL and Inst. Memory
for 40 data records with realtime clock. Serial port for data
download. Calibrator included. Operates with 4 x AA alkaline
batteries.
R on nL-31 type 1 sLm w th 1/1 & 1/3 octave F lter
RIO,NL31 NZ
Complies with standards, IEC60651: 1979 Type 1, IEC60804:
1985 Type 1, IEC/CDV: 61672-1 Class 1. Simultaneous
measurement of: sound level (Lp), equivalent continuous sound
presure level (Leq), sound exposure level (LE), Maximum (Lmax)
& Minimum (Lmin), percentile sound pressure level (LN), 5
selectable settings. Measurement ranges are: A weighting:
28~138dB, C weighting: 33~138dB, flat: 38~138dB, peak
sound level: 141dB. Time weightings are: fast, slow, impulse
(impulse is selectable only for auxiliary processing functions).
Ranges 100dB dynamic, frequency 20~12,500Hz (including
microphone). Timer function for automatic measurement over
extended periods. Supplied with NX-21SA 1/1 and 1/3 octave
filter card.
R on nL-32 sLm w th RtA & nAtA cert ficat on
RIO,NL-32RTA-NATA AU
Precision integrating sound level meter to IEC type 1 (class 1)
specification, with NATA calibration. Fitted with internal Compact
Flash Card reader and supplied with NC-74 field calibrator.
Frequency range 20~20,000Hz with weightings A, C, and flat.
Time weightings fast, slow and impulse. Measurement range (A)
28~138 dB. Broadband measurement functions Lp (SPL), Leq,
Lmax/min, Lae, Lx, and selectable auxiliary functions with manual
or auto storage [logging]. Measurement time (Leq) from 10
seconds to 200 hours. Inbuilt memory for up to 100 data sets,
or to limit of fitted CF card using manual or auto storage. AC or
dc outputs, RS232C interface and cable CC-93 for serial printer.
Supplied with NX-22RT card for real time 1/1 and 1/3 octave
analysis and display, for measurement functions Lp, Leq, LE, Lmax
and display of AP (all-pass) AP(A) and 1/1 or 1/3 octave values
as selected, with manual data storage only to NX-22RT card.
Download of card-data to PC requires flashcard reader. Alkaline
batteries (24h operation) or AC adaptor.
R on nL-32 sLm w th RtA
RIO,NL-32 NZ
Precision integrating sound level meter to IEC type 1 (class 1)
specification, with IANZ calibration. Fitted with internal Compact
Flash Card reader and supplied with NC-74 field calibrator.
Frequency range 20~20,000Hz with weightings A, C, and flat.
Time weightings fast, slow and impulse. Measurement range (A)
28~138 dB. Broadband measurement functions Lp (SPL), Leq,
Lmax/min, Lae, Lx, and selectable auxiliary functions with manual
or auto storage [logging]. Measurement time (Leq) from 10
seconds to 200 hours. Inbuilt memory for up to 100 data sets,
or to limit of fitted CF card using manual or auto storage. AC or
dc outputs, RS232C interface and cable CC-93 for serial printer.
Supplied with NX-22RT card for real time 1/1 and 1/3 octave
analysis and display, for measurement functions Lp, Leq, LE, Lmax
and display of AP (all-pass) AP(A) and 1/1 or 1/3 octave values
as selected, with manual data storage only to NX-22RT card.
Download of card-data to PC requires flashcard reader. Alkaline
batteries (24h operation) or AC adaptor.
B&K 2238e type 1 Integrat ng sLm enhanced
software & Logg ng
BK,2238E-NATA AU
Type 1 (class 1) Integrating sound level meter with additional
functions including enhanced software, frequency analysis and
data logging. Standard routines include functions for workplace
measurements and general sound-level checks; enhanced
software (firmware) offers additional measurements and statistics
for assessment of environmental noise problems; frequency
analysis automates measurements in the 9 single octave
bands and 29 1/3 octave bands. Supplied with field calibrator.
Compatible with BK,7815 Noise Explorer Environmental software
for download, data analysis and display.
B&K 7815 env ronmental software - no se explorer
BK,7815 AU
Software package for downloading and reporting of noise data
measured with B&K meters. Compatible with sound level meters
(2239, 2238) and noise dosemeters (4443). Offers data transfer,
formatting of data for export, display and print in tabular or
graphical form, file management and calculation of sound power
or sound reduction index from intensity measurements.
oH&s & enVIRonmentAL - GeneRAL
tsI s dePak sP730 Personal sampl ng Pump
TSI,SP730 AU
Personal sampling pump with internal digital flowmeter. Flow
range to 3,000ml/min with internal low-flow bypass for precise
control and measurement at low and high rates. Keypad
programming with lockout option. Multimode operation for
manual control and preset programs with intermittent sampling.
Supplied with “TrakPro” data analysis software and USB interface.
Battery powered, 2,700mAH rechargable NiMH gives up to
18.5h at 1L/min. Intrinsically safe.
severn model tortus II Floor sl p tester
SEV,TORTUSII AU
Floor friction tester. Measures and records the dynamic coefficient
of friction. Applications in assessing floor safety, evaluating
cleaning methods and maintenance procedures, accident
investigation, etc. Meets the draft requirements of international,
Australian and New Zealand standards.
L on Breath Alcohol Analyser
LIO,SD-400P AU
Portable breath alcohol analyser with attached printer. Uses
disposable mouthpieces. Approved by most law-enforcement
agencies.
71

72
GAS ANALYSIS & MONITORING
GAS ANALYSIS & MONITORING
Model Type Temp °C
Max
GAs AnALYsIs & monItoRInG
testo 300m combust on Gas Analyser
TES,300M AU/NZ/MY
Flue gas analyser for combustion efficiency measurement.
Temperature range -40~1200°C ±0.5 (100)
with gas probe operation to 1,000°C max. Draught/pressure
range 80mBar, ±0.03 . Gases measured: O 2 0~21%, ±0.2%;
CO 2 [calculated] 0~CO 2 max %vol ±0.2%; CO 0~8,000ppm,
±20 (

GAs AnALYsIs & monItoRInG contInUeD
PPm 400 Portable Formaldehyde meter
PPM,FORM400 AU
Portable Formaldehyde meter for measuring airborne
formaldehyde in the workplace. Electrochemical sensor, with
internal pump for rapid response. Operating range 0.05~10ppm
with readout on 4 digit LCD display. Kit includes field calibration
standard. Operates from 9V alkaline battery.
testo 350 combust on Gas Analyser
TES,350 AU
Measures O 2 , CO, CO 2 , NO, NO 2 , and SO 2 concentrations.
Calculates CO 2 concentration and indicates draught, temperature,
excess air, and gross/net efficiency values. Ranges: O 2
0~21% vol, CO with H 2 compensation 0~10,000ppm, NO
0~3,000ppm, NO 2 0~500ppm, SO 2 0~5,000ppm, draught
(50hPa), temperature -40~1,200°C. Complete with printer and
RS232C interface. Battery and ac mains operation.
testo 350XL Portable Flue Gas Analyser
TES,350XL AU/NZ
Portable flue gas analyser. Measures O 2 , CO, CO 2 (measured
by NDIR), NO, NO 2 , and SO 2 concentrations plus draught,
temperature, excess air, and gross/net efficiency values. Ranges:
O 2 0~25% vol, CO 2 0~50% vol, CO with H 2 compensation
0~10,000 ppm with measuring-range extension and selectable
dilution factor, NO 0~3,000 ppm, NO 2 0~500 ppm, SO 2
0~5,000 ppm, draught 50 hPa, temperature -40~+1,000°C.
Includes switch-off and rinse function for CO cell and fresh
air rinse for longer term measurements. Internal memory for
250,000 readings, with RS232C interface and software provided.
Operation from mains or rechargeable battery.
novatech o 2 & co 2 combust on Gas Analyser
NOV,1637-5CGA AU
Oxygen and carbon dioxide analyser for flue gas/combustion gas
applications. Special version of model 1637-5, with steel transfer
tubing, closed IR cell (sapphire windows) and ruggedised internal
flow path. Fitted with filtration system for moisture protection.
240V, 50Hz.
Aeroqual Portable Logg ng ozone mon tor
AER,500L AU
Portable ozone monitor fitted with low concentration-range
detection head. Operating range 0.000 to 0.500 ppm ozone
with display in ppm or mg/m3. Gas sensitive semiconductor
[GSS] sensor for accurate low-level measurements, T90 response
approximately 100 sec. Operation from mains power supply or
battery pack (4 hours operation). Internal data logging for 8000
points with software and cable for download to PC, or data logging
direct to PC. Application for indoor air quality measurements.
Isc mG140 4-Gas Personal mon tor for cH 4 , o 2 , co
& H 2 s
ISC,MG140 AU
Four gas personal monitor for combustible gases (% LEL), oxygen
(% O 2 ), carbon monoxide (ppm CO) and hydrogen sulphide (ppm
H2S). International approvals UL & CSA - class 1, groups A, B,
C & D. Audible [90dB] and visual alarms. Supplied with case and
belt-loop, calibration cup and battery charger. Run time 8-10h
on full charge.
Isc mX6 Personal Gas mon tor w th
colour D splay
ISC,MX6 NZ
A versatile multigas personal gas monitor for use in hazardous
areas and confined spaces. Default sensors are as follow:
Combustible gas (LEL): 0-100%, Oxygen: 0-30%, Carbon
Monoxide: 0-999ppm, Hydrogen Sulphide: 0-500ppm. Weighing
just over 400g and housed in a rugged impact resistant housing,
the unit will run on the Lithium Ion battery for up to 24 hours
between charges. Coloured LCD screen and intuitive interface
makes the unit easy to use even in adverse lighting. Alarms
include: vibration, 95dB audible alarm, screen alerts and flashing
lights. Additional sensors including Ammonia, Chlorine, NO X , CO 2
are available by special order.
Isc Gas mon tor for cH 4 , o 2 , co & H 2 s
ISC,TMX412 AU/NZ
Four gas monitor complete with confined space entry kit. Detects
4 gases flammable (CH 4 ), oxygen (O 2 ), carbon monoxide (CO)
and hydrogen sulphide (H 2 S). Measures % LEL flammable, %
O 2 , ppm CO & H 2 S. Intrinsically safe EEx ia T4 rated (Australian
Approved). Confined space entry kit includes sampling pump,
tubing, filters and carry case. Designed to test confined spaces
from a safe area prior to entry. Supplied in carry case complete
with training video and battery charger. Other sensor options
available at extra cost. Battery pack run time 8h (18h with lithium
batteries).
Isc ItX 4-Gas mon tor confined space & Logg ng
ISC,ITX-STD AU
Multi-gas monitor with confined-space kit and logging option.
Configured for 4 gases: combustible 50ppm~100%LEL, oxygen
0~30%, CO 0~999ppm & H 2 S 0~999ppm. Intrinsically safe:
Ex ia d I/IIC T4[Australia]. Confined space kit includes motorised
pump, tubing, calibration cup and regulator. Logging option by
time or event, up to 300h survey data at 1min intervals, with
datalink/software for download. Includes training video, Li-ion
battery pack with charger, and backup alkaline-battery pack.
Gascheck 3000 Portable General-purpose
Leak Detector
ION,GASCHECK3000 AU
Portable leak detector. Micro thermal-conductivity sensor for highsensitivity
detection of gases with a thermal conductivity different
to that of air, including helium, carbon dioxide, refrigerants, sulphur
hexafluoride, natural gas, etc in five groups. Direct reading of
leak rate in ml/s with audio and visible signals. Detection limit for
helium 2E-5ml/s. Battery powered.
RAe systems m n rae 2000 Portable PID
RAE,MR2000 AU
Portable handheld V°C (Volatile Organic Compound) monitor
with data logging. 3-D PID sensor (Photo-Ionisation Detector)
fitted with 10.6eV lamp. Ranges 0~999ppm (resolution 0.1) or
100~10,000ppm (resolution 1) V°C expressed as isobutylene.
Built-in correction factors for 102 compounds from a total
standard library of 250. Integrated pump for local or remote
(30m) sampling, with stall protection against liquid ingress.
Downloadable data logging for 1,500 points with time, data and
header. Intrinsically safe. Up to 10h operation with rechargeable
(NiMH) or alkaline batteries.
novatech o 2 and co 2 Analyser/transm tter
NOV,1637-5 AU
Oxygen and carbon dioxide analyser for packaging atmosphere,
general industrial and research use. Oxygen sensor reading
1ppm to 100% with 1% accuracy. NDIR carbon dioxide analysis
0~100% ±3% of full scale. 2 x 4~20mA outputs, 1 common &
3 selectable alarm relays. Gas connection 1/8 Swagelok. Flow
rate with internal pump 100~500cc/min. AC operation.
Isc mDU420 Logg ng methane mon tor
ISC,MDU420 AU
Dual-range methane monitor with non-dispersive infrared sensor.
Low range 0~100% LEL, and auto-range 0~100% methane
by volume. Internal pump for ambient air or stream sampling.
Datalogging included, with software and cable for download.
Supplied with 450mm stainless steel probe for flue gas analysis.
Rechargeable, with alkaline-battery pack as backup.
73

74
eLectRocHemIstRY, WAteR QUALItY
Anton Paar DmA 35n Portable Dens ty meter
PAA,DMA35N AU
Portable density, specific gravity & concentration meter. Measuring
range 0.000~1.999 g/cc and 0.0~40.0ºC. Built-in pipette style
pump for sample aspiration, with port for optional syringe-filling.
Display of specific gravity, ºBrix, ºBaumé, %alcohol, proof, ºPlato,
API, or %H2SO4. Rated intrinsically safe [ATEX] for use with
batteries, petrochemicals and solvents. Data storage of up to
1024 results, with recall, and infrared port for RS232 download
to serial printer or PC. Wetted parts glass and PTFE. Battery
powered.
tPs WP-80 pH and temperature meter
TPS,WP-80 AU
Portable hand-held meter for pH, mV and temperature. Supplied
with combination pH electrode and separate temperature
sensor on 1m cables. Operating ranges 0.00~14.00pH and
-10.0~120.0ºC [automatic sensor recognition with auto pH
correction 0~100ºC]. Case water resistant to IP67, connectors
to IP65. Menu driven, with alphanumeric display. Auto storage
of time and date of last calibration for GLP. Memory for 2400
readings of data, time and date, for Notepad results collection, or
for AutoLog with logging intervals between 1 sec and 90 hr. Fitted
with RS232C interface and supplied with download-software,
charger and solutions. Rechargeable NiMH battery gives up to 50
hr operation.
tPs Redox electrode
TPS,REDOX AU
Silver/chloride Redox electrode for use with TPS LC80A Ph meter.
Supplied with 2 bottles of Zobell solution for calibration. 1:1
dilution gives approx. 231mV.
tPs WP-88 turb d ty & temperature meter w th
8m cable
TPS,WP-88 AU
Portable hand-held turbidity and temperature meter for field or
laboratory use. Sensor probe diameter 45mm, with 8m cable.
Turbidity ranging 0.1~ 200/2000NTU ±1NTU with autoselection.
Temperature compensation and sensor range 0~ 60ºC
±0.1ºC. Case water resistant to IP67, connectors to IP65, with
detachable cable and sensor. Menu driven, with alphanumeric
display. Auto storage of time, date and results of last calibration
for GLP. RS232C interface, and memory for 150 readings of
data, time and date, for Notepad results collection, or for AutoLog
results collection with logging intervals between 1min and 24h.
Rechargeable NiMH battery gives up to 50h operation. Supplied
with download-software, charger and calibration solutions.
tPs WP-82 D ssolved oxygen meter
TPS,WP-82 AU
Portable hand-held dissolved oxygen and temperature meter.
Operating ranges 0~20ppm, 0~240% saturation, 0~45%
gaseous and ppm with salinity correction. temperature range
-10~120°C. Case water resistant to IP67, connectors to IP65,
with 3m detachable cable and ED1 electrode. Menu driven,
with alphanumeric display. Auto storage of time and date of last
calibration for GLP. RS232C interface, and memory for 150
readings of data, time and date, for Notepad results collection, or
for AutoLog results collection with logging intervals between 1min
& 24h. Rechargeable NiMH battery gives up to 75h operation.
Supplied with download-software, charger and solutions.
tPs WP-84 conduct v ty sal n ty temperature meter
TPS,WP-84 AU
Portable hand-held meter for conductivity, TDS (Total Dissolved
Solids) and temperature. Automatic range selection with 5 ranges.
Case water resistant to IP67, connectors to IP65. Menu driven,
with alphanumeric display for full-text prompting. Storage of time
and date of last calibration for GLP. Memory for 150 readings of
data, time and date, for Notepad results collection, or for AutoLog
results collection with logging intervals between 1min & 24h.
Rechargeable NiMH battery gives up to 75h operation. Supplied
with sensor (k=1), charger and solutions.
YsI 55D D ssolved oxygen meter
YSI,55D NZ
Measures dissolved oxygen in mg/L or percent saturation. Range
is 0~20mg/L, resolution is 0.01mg/L, accuracy is 0.3mg/L.
Provides simultaneous readings of O 2 & °C. Dissolved O 2 readings
are automatically compensated for temperature. Offering pushbutton
calibration with a built-in calibration chamber, direct salinity,
and altitude compensation. Supplied with 3m cable to probe.
YsI 550A D ssolved oxygen meter w th 12ft cable
YSI,550A NZ
Handheld microprocessor based dissolved oxygen meter for use
in fresh water, sea water or polluted water. Range 0~50mg/l
resolution is 0.01 or 0.1. Air saturation range is 0~500%
resolution is 0.1 or 1 air saturation. Temperature range is -
5°C~45°C resolution is 0.1. Features: Self-diagnostics on power
up. Compensation for altitude, salinity & temperature, waterproof
to IP-67, push-button calibration, built-in calibration cha mber.
Over 2,000h (alkaline) battery life at 25°C. Supplied with 4m
probe lead.
YsI 63 pH sal n ty and conduct v ty meter
YSI,63-10 NZ
Measures temperature, pH, conductivity, and salinity. Ranges
are: 0~14pH, resolution 0.01, conductivity is 0~200mS/cm
over 4 ranges, salinity is 0~80 ppt, resolution 0.1, temperature
is -5~75°C, resolution 0.1. Stores 50 readings with ID, userselected
scale or autoranging for conductivity. Supplied with a
15m cable to probe.
Hor ba U-20 mult -funct on Water Qual ty meter
HOR,U-20XD1 AU
Multi-parameter water quality monitor with 30m cable. Waterproof
Meter unit rated to IP67 with LCD display, analog output and
RS232C interface for data download using software supplied.
Detachable probe, 47mmØ with stainless steel cover suitable for
use in 50mm wells, with sensors for pH/ORP, dissolved oxygen,
conductivity/salinity/TDS/seawater specific gravity, temperature,
turbidity and depth. Data logging up to 1m@15min intervals.
Alkaline battery operation.
Hydrolab Quanta mult probe Water Qual ty meter
HYD,QT-MP-A AU
Multi-parameter water quality analyser with 15m cable. Meter unit
rated to NEMA6 (waterproof), with simultaneous parameter display,
realtime manual storage of 100 frames of data and SDI interface.
Transmitter probe with sample circulator, fitted with sensors for
temperature, specific conductance/salinity, dissolved oxygen, pH,
ORP and turbidity. Operates on 3 x C size batteries.
tPs Water Qual ty meter
TPS,90FL-T AU
Field meter and logger for water quality measurements.
Configured with independent probes for pH, conductivity/
salinity[TDS]/temperature, dissolved oxygen[DO] and turbidity.
Cables 5m with probe holder and safety harness. LCD display
readout with simultaneous display of all measurements. Manual,
“notepad” storage or automated data logging for up to 1,808 sets
of readings by time and date. RS232C interface, with WinTPS
software included. Supplied with rechargeable battery, and cliplead
for operation from a 12V source such as a car-battery.
Anal te neP160-1 turb d ty meter
ANA,NEP160 NZ
Portable turbidity meter suitable for potable or waste water
measurements depending on the probe type. Supplied with either
NEP280 100~20,000NTU waste water retro-scatter probe on
a 5m cable or NEP260 0~3,000NTU potable water probe with
25m cable. Display resolution for the NEP280 probe is 10NTU,
NEP260 probe is 1NTU. Repeatability is ±2% +1 digit on all
ranges. Data logging up to 100 time & date stamped readings
with sample intervals from 1s~90min. Analogue output with a
range of 0~2V fs on any range. RS232C interface which can
output readings on request or at preset intervals from 1~99s
or min.

eLectRocHemIstRY, WAteR QUALItY contInUeD
DKK toA model Rc-24P Portable Res dual
chlor ne meter
DKK,RC-24P-DP AU
Portable, direct-reading residual chlorine meter for water analysis.
Range 0~2mg/L [ppm]. Reagent-free measurement with
electrode, 3m cable, float and sample container for in-situ or
grab-sampling. Compatible with direct chlorination, hypochlorite
or dichloroisocyanurate dosing. Calibration data stored in
electrode with correlation with DPD methods. Waterproof to
IP67. ISO validation functions, storage of 300 measurements and
RS232 printer output. Battery operated.
Aquafluor Handheld Fluor meter for Rhodam ne
Wt & Fluoresce n
TUR,AQF-RF AU
Dual-channel handheld field fluorimeter. Configured for
water-tracing by detection of rhodamine WT and fluorescein
dyes, detection limit ~0.4ppb. RWT channel excitation 540nm,
emission >570nm; Fluorescein channel excitation 475nm,
emission 515nm. Internal data logging for 1000 data points, with
download. Battery operated.
Van essen Depth/temperature Groundwater Logger
VAN,TD30 AU
Groundwater depth and temperature logger for operation to 30m.
Independent probe 22mmØ x 125mm long with internal memory
for 2 x 24,000 measurements, battery-life 8~10y. Reader for
set-up and download of data using standard computer. Supplied
with “Baro Diver” - ambient/surface logger for atmospheric
pressure correction.
Isco 6700 ser es Water sampler w th Bubbler
Flow module
ISK,6700-730 AU
Advanced water sampler for fully programmed collection.
Samples can be collected in 1, 2, 8, or 24 glass or plastic sample
containers based on time, flow, and/or parameter set points. Fitted
with NEMA 4X,6 (IP67) sealed controller featuring an exclusive,
built-in pump, flash memory for easy programming changes, and
a plug-in module port for connection of a flow meter module
or parameter measurement module to enhance monitoring
capabilities. Provided with bubbler flow module. Sample bottles
available. Run from rechargeable 12V sealed batteries.
sPectRoscoPY
mAteRIALs testInG
sh madzu UV-m n 1240 spectrophotometer
UV-V s ble
SHI,UV-1240 AU
Single beam scanning UV-visible spectrophotometer,
190~1,100nm with 5nm bandwidth. Large LCD display for onscreen
viewing of results, calibration curves and spectra. Standard
applications include photometric measurement, spectrum
scanning and quantitation. IC data card system for storage of
raw data, methods and results, with optional program packs for
additional applications. Interface ports for printer or computer.
220~240V, 50/60Hz.
X-R te sP60 Portable sphere colour spectrophotometer
XRI,SP60 AU
Portable spectrophotometer for surface colour measurements.
Diffuse 8O [d/8] optical geometry with fixed 8mm aperture.
Tungsten source for illuminant types C, D50, D65, D75, A, F2,
F7, F11 & F12. Standard observers 2 & 10O. Blue-enhanced
photodiode detectors with spectral range 400~700nm.
Measures opacity and colour by chromatic, apparent or tristimulus
calculation, with simultaneous included and excluded specular
component, and spectrum at 10nm intervals. Storage of up to
2,000 samples with results download to serial printer or computer.
Operation from internal rechargeable battery or ac adaptor.
spectron c Hel os eps lon spectrophotometer V s ble
SUV,EPSILON1 AU
Single beam visible spectrophotometer, 325~1,000nm with 8nm
bandwidth, operating in the range -0.1~2.5A. Wide view-angle
LCD display and sealed membrane keypad with push button
auto-zero. Sealed optics, with wavelength slew >4500nm/min.
Operational modes absorbance, transmission, concentration and
factor. Supplied with standard cellholder for 10mm square cells.
RS232C port for computer and parallel interface for printer.
Anton Paar DmA 35n Portable Dens ty meter
PAA,DMA35N AU
Portable density, specific gravity & concentration meter. Measuring
range 0.000~1.999g/cc and 0.0~40.0ºC. Built-in pipette style
pump for sample aspiration, with port for optional syringe-filling.
Display of specific gravity, ºBrix, ºBaumé, %alcohol, proof, ºPlato,
API, or %H2SO4. Rated intrinsically safe [ATEX] for use with
batteries, petrochemicals and solvents. Data storage of up to
1024 results, with recall, and infrared port for RS232 download
to serial printer or PC. Wetted parts glass and PTFE. Battery
powered.
Hydramot on V scol te 700 Portable V scometer
HYL,V700S-21 AU
Advanced portable viscometer with stainless-steel probe.
Operating range 0.1~10,000mPaps (cps) with integral
temperature correction -40~150ºC. Probe tip 21mmØ,
immersion length 115mm (viscosity only) or 145mm (viscosity/
temperature). Acetal polymer probe base for handheld or
clamped operation, with coiled-cable connection to meter unit with
5 digit display. Battery powered.
75

76
manufacturers index
3m
3M,701 25
ABAcUs
ABA,301 67
AcR
ACR,POWERWATCH 29
AnGeLAntonI
ACS,CH160C 58
ACS,CH340C 58
ACS,TROLLEY 58
ACS,WINKRATOS 58
ADVAntest
ADV,R3365A 9
ADV,TR1720 10
ADV,U3771 9
AeRoQUAL
AER,500L 73
AGILent
AGI,N9340A-TG 8
AH sYtems
AH,ANTENNA 10
AH,SAS-200/550 10
AH,SAS-200/571 10
AH,SAS-200/574 10
AH,SAS-571 10
AIc
AIC,SG-AST-500 49
AIRmAGnet
AIR,AIRMAG SPEC AN 8
AIR,AIRMAGNET-SURVEY 16
AIR,AIRMAGNET-TRIO 16
AIRFLoW
AIR,AV2 67
AIR,AV2-NATA 67
AIR,AV6 67
AIR,DM2 67
AIR,PITOT-36 67
AIR,UA30 68
ALGoDUe
ALG,C173 35
ALG,RET 30
ALG,UPM6100 30
ALG,UPM6100-PLUS 30
AmeteK
AME,CADET-25N 49
AME,HL2700N 58
AME,PPCE-NATA 58
AnALIte
ANA,NEP160 74
A&D meRcURY
AND,FC-10K 50
AND,FG-150KB 50
AND,FS-15KA 50
AND,GR-202 50
AND,HF-300G 50
AND,HL400 50
AND,HP-40KA 50
AnRItsU
ANR,ANTENNA 10
ANR,FCN4760 9
ANR,ME538M 15
ANR,MG921A 19
ANR,MS2711A 8
ANR,MS2711D 8
ANR,MS2711D-6-29 8
ANR,S331D 9
ANR,S332D 9
ANR,S820A 9
ANR,S820D 9
ANR,WAVEGUIDE-ADAP 9
ANR,WIFI-ANTENNA 10
AQUA
AQU,SNAKEEYE 46
AcoUstIc ReseARcH
LABoRAtoRIes
ARL,EL-235 52
ARL,EL-315 70
ARL,EL-316 70
AsHcRoFt
ASH,1000 45
AVe
AVE,VSIPLUS 61
AVo
AVO,OTS60PB 25
AVO,PENTA-PLUS-DMM 36
BAcHARAcH Inc
BAC,LEAK10 69
BARLo
BAR,HPE-FM02177 54
BAR,MODULATOR 15
BAR,MTC-150 49
BAR,STC-10000 49
BAR,STC-20000 49
BAR,STC-25000 49
BAR,STC-4400 49
BAR,STC-5000 49
BAR,STC-500NATA 49
BAUR
BAU,DPA75 25
BeAmeX
BEA,BIC200 57
BeHA
BEH,5774E 36
FW BeLL (UsA)
BEL,4080 21
BEL,4090-20 21
BEL,5080 21
BEL,5180 21
BEL,CG-120A 35
BIDDLe
BID,550005 36
BIRD
BIR,25A-10 14
BIR,43 (M) 12
BIR,4391 12
BIR,4391A 12
BIR,4421 12
BIR,8080 14
BIR,APM16 12
BIR,ELEMENT 13
BIR,ELEMENT-HF 13
BIR,ELEMENT-LF 13
BJm coRPoRAtIon UsA
BJM,ALL-TEST-4 25
BRUeL & KJAeR
BK,2237A 70
BK,2238NMT-KIT 70
BK,2238E-NATA 71
BK,2239A-NATA 71
BK,2635 52
BK,4333 52
BK,4343 52
BK,4371 52
BK,4443 70
BK,7815 71
BK,8202 52
BK,8301 52
BLAstRonIcs
BLA,UMX-SM-6 52
BAsIc meAsURInG InstRUments
BMI,8800 29
BMI,A112 29
BMI,A116 29
BMI,A120 29
BRIstoL
BRI,10000-NATA 48
BRI,5000-NATA 48
BWD
BWD,246A 4
PAcom
CAM,COL-AUTO 61
DVmR
CAM,DVMR-4C 61
cAseLLA
CAS,MICROTHERM 67
cAtU
CAT,CL-8-36 PH STICK 34
ccI
CCI,POWER-MATE 15A 31
cec
CEC,140BAR 48
CEC,30BAR 48
GRIDsense
CHK,CK1 31
CHK,CK5 31
CHK,CR100 31
CHK,CR100S 31
CHK,CR100S 35
CHK,CR500 31
CHK,CT1000L 31
CHK,CT3000 PLUS 32
CHK,CT3000L 32
CHK,LM05 23
CHK,MODEM-56K 31
CHK,PM20 31
CHK,PM30 31
CHK,PM30PLUS 31
CHK,PM40PQA 31
cHLoRIDe PoWeRLAnD
CHL,5000 37
CHL,ACTIVE3000 37
cHRomA
CHR,61501 PAC-PS 38
cRomPton
CI,253/50 35
sAnDIsK
COM,FLASH512MB 42
cRoYDon PRecIsIon
InstRUments
CRO,DO7 23
cRYstAL enGIneeRInG
coRPoRAtIon
CRY,XP21-100-NATA 48
CRY,XP21-10K-NATA 48
CRY,XP21-3K-NATA 48
cscoPe
CSC,CS550 61
CSS,COLT4 67
cAmBRIDGe
CT,891040-110 35
DAnBRIDGe
DAN,DR60 6
DAN,JP30A 33
DAtA I/o
DAT,CHIPWRITER 6
DAtAtAKeR
DE,CEM-AD 40
DE,DT5LTP-R 39
DE,DT605 40
DE,DT605-3 40
DE,DT800 40
DE,DT800-4PRO 40
DE,DT-MEM1024 40
DeFeLsKo
DEF,FNS2 53
DEF,POSITEST 53
Detec
DET,DH-50 61
DET,DH-50-KIT4 61
DILLon
DIL,ED2000-5K 49
DKK toA Inc
DKK,RC-24P-DP 75
DIGItAL LIGHtWAVe
DLW,NIC10G 15
DLW,NIC2.5G 15
DLW,NICPLUS10G 15
DP meAsURement
DPM,TT370S 67
DPM,TT570CL-NATA 67
DRAnetZ-BmI
DRA,128MBFMC 29
DRA,646-3 29
DRA,CAF-ETHERNET 29
DRA,PG4400 29
DRA,PR150 28
DRA,PR1500 28
DRA,PR6035A/36 29
DRA,PX5 28
DRA,PX5-400 28
DRA,TR2015 29
DRA,TR2021 28
DRA,TR2510 28
DRA-BMI,DVMDS 29
DRUcK
DRU,DBC150TC 56
DRU,DPI603-10-NATA 57
DRU,DPI603-2 57
DRU,DPI603-20 (AU/MY/NZ) 57
DRU,DPI603-20NA 57
DRU,DPI610-160 57
DRU,DPI610-20IS 58
DRU,DPI610-20-NATA 58
DRU,DPI610-2-NATA 58
DRU,DPI610-400 (MY/NZ) 58
DRU,DPI610-400-NATA 58
DRU,DPI615PC20BG 57
DRU,DPI705 67
DRU,PTX1400-25 44
DRU,PTX1400-4 44
DRU,PTX1400-40 44
DRU,PTX1400-400 44
DRU,PTX1400-600 44
DRU,UPS-IS 58
DYnAteL
DYN,2273 20
DYonIcs
DYO,750 47
enDRess & HAUseR
E&H,PMP-100BAR 44
E&H,PMP-1BAR 44
E&H,PMP-40BAR 44
E&H,PMP-4BAR 44
eAton
EAT,9120-2KVA 37
eLBeX
ELB,CCTV2 61
eLcometeR
ELC,402 52
KoLectRIc ReseARcH LtD
ELE,EL35-2020 54
eLGAR
ELG,501 38
emc
EMC,1000KG 49
emeRson
EME,375 56
e.n.I.
ENI,604L 7
enVIRoDAtA
ENV,DL20WSD 69
ENV,WM20 69
escoRt
ESC,3EXT-LO/SS 40
ESC,4EXT 40
ESC,ANALOGUE 40
ESC,HUM/T-KIT 40
ESC,HUM-KIT 40
ESC,PH-ADAPTOR 40
eXcALIBeR
EXA,1000 61
MIN,EX-1000 61
eXtecH
EXT,407026 69
FeRGUson
FER,115-1000 37
FER,115-2000 37
FIBReoPtIc
FIB,MTFS15-1000 47
FIB,MULTI/300M 19
FIteL
FIT,S121A 19
FIT,S176 19
FIT,S177A 19
FIT,S323B 19
FIT,S325A 19
FLAnn
FLA,1713320 13
FLIR sYstems
FLI,BCAM-SD 60
FLI,E45 60
FLI,INFRACAM 60
FLI,INFRACAM-SD 60
FLoYD InstRUments PtY LtD
FLO,PG 0- 250BAR 48
FLO,PG 0-160BAR 48
FLUKe
FLU,1630-EARTH CLAMP 25
FLU,177 3
FLU,189 3
FLU,199 2
FLU,199C-SCOPEMETER 2
FLU,36 12
FLU,43 31
FLU,52-2 59
FLU,54 59
FLU,54-2 59
FLU,54-2FLUKEVIEW 59
FLU,54FLUKEVIEW 59
FLU,5500A-NATA 56
FLU,576 59
FLU,725 (AU/NZ/MY) 56
FLU,725-NATA 56
FLU,743B 56
FLU,744 (AU/NZ/MY) 56
FLU,771 34
FLU,80K-40 2
FLU,80TK 59
FLU,990DSL 15
FLU,CABLEIQ 17
FLU,DSP-PM 17
FLU,DTX-10G KIT 17
FLU,DTX1200 17
FLU,DTX1800 17
FLU,DTX-GFM 17
FLU,DTX-MFM 17
FLU,DTX-OTDR 17
FLU,DTX-SFM 17
FLU,ETHERSCOPE-EX 16
FLU,ETHERSCOPE-WLAN 16
FLU,FT330 18
FLU,FT350 18
FLU,FT650 18
FLU,FTK150 18
FLU,FTK200 18
FLU,INTELLITONE PRO 19
FLU,NETTOOL 16
FLU,OPTIFIBER-MM 18
FLU,OPTIVIEW-GIG 16
FLU,PV350 45
FoURIeR sYstems
FOU,DAQPRO-2 40
FOU,MICROLOG-KIT 40
GARRett
GAR,CS5000 61
GLoBAL WAteR
GLO,FP101 64
nettest
GNE,CMA4000SM 18
GNE,CMA4500SM-MM 18
GNE,CMA5000SM-45 18
GNE,EPE06/7 15
GNE,FP1601SR 16
GNE,L3000E-ND 15
GNE,MPA7400 15
GNE,OSA-TD4791CL 19
GNE,PMD 19
GNE,TD-14M36003 18
GNE,WINPHARAOH2 16
GenRAD
GR,1390-B (M) 13
GR,1432T 6
GR,1433-20 6
GR,1433B-NATA 6
GR,1433F-NATA 6
GRAnt
GRA,W6-NATA 56
HAennI
HAE,KRK501 60
HAGenUK
HAG,2000 19
HALoteK
HAL,78000 69
HALstRUP WALcHeR
HAL,KAL84 57
HARt
HAR,1521-NATA 59
HAR,3125-NATA 56
HAR,7102-NATA 57
HAR,9100-A 56
HAR,9103 56
HAR,9105 56
HAR,9105-NATA 56
HAR,9107-NATA 56
HAR,9141-NATA 56
HAR,9150 56
HAR,9170-R-NATA 56
HDW
HDW,T19 19
HeIne tecHno
HEI,TECHNO-6X320 47
HILtI
HIL,FERROSCAN 54
HIL,PM10 45
HIL,PS20 54
HIL,PS200 FERROSCAN 54
HIoKI
HIO,2331-20RPMS 29
HIO,2332-20RPMS 29
HIO,3109 35
HIO,3134 (M) 12
HIO,3136 (M) 12
HIO,3169-20CLAMPONPT 30
HIO,3169-21 CLAMPONPT 30
HIO,3169-21 CT1000AMP 30
HIO,3169-21 CT500AMP 30
HIO,3196-PQA 30
HIO,3197PQA 30
HIO,3282 36
HIO,3285 35
HIO,3290CLAMPONAC/DC 35
HIO,3293 CLAMPON-LT 34
HIO,3404 45
HIO,3423 69
HIO,3423-NATA 69
HIO,3454-51-3 23
HIO,3455HVIT-5KV 23
HIO,3551BATTERYTEST 37
HIO,3632-20 39
HIO,3641-20 39
HIO,3641-20-KIT 39
HIO,8206 43
HIO,8421-01 40
HIO,8421-51 40
HIO,8710 43
HIO,8810 41
HIO,8811 41
HIO,8826-32CRECORDER 41
HIO,8835 42
HIO,8835-01 42
HIO,8835-HD520 42
HIO,8841 42
HIO,8842 42
HIO,8860 41
HIO,8938 41
HIO,9018-10 42
HIO,9132 42
HIO,9304 42
HIO,9305 42
HIO,9306 42
HIO,9320 42
HIO,9321 42
HIO,9322-KIT 42
HIO,9555-9278 42
HIO,9660CT100A 31
HIO,9661 CCT-500A 34
HIO,9661-01 CCT-500A 34
HIO,9669-CCT-1000A 34
HIO,9670 Printer 31
HIO,9694CT5A 31
HIO,9725 41
HIGH VoLtAGe Inc
HIV,PFT303 33
HIV,PFT503 33
HIV,VLF4022 33
HIV,VLF6022 33
HIV,VLF90 33
HIRst mAGnetIc InstRUments
HMI,GM04 21
HoBo
HOB,PRES 60
HoLADAY
HOL,HI-3002 10
HOL,HI-3004 10
HOL,HI-3604 21
HOL,HI-3627 21
HonDA
HON,EU3000IS 38
HoRIBA
HOR,U-20XD1 74
HoUston
HOU,1850-40 48
HeWLett PAcKARD/AGILent
HP,11667A 13
HP,11679A 9
HP,11692D 13
HP,16500C 6
HP,1652B 6
HP,1662A 6
HP,33120A 5
HP,33220A 5
HP,33250A 5
HP,3400A 3
HP,34401A 3
HP,35660A 70
HP,35660A 6
HP,35670A 6
HP,4951C 16
HP,4957A 16
HP,53181A 7
HP,5350A 7
HP,5352B 7
HP,5385A 7
HP,6104A 2
HP,7440A 43
HP,778D 13
HP,8012B 5
HP,8350B 7
HP,83592C 7
HP,83623B 7
HP,8481A 13
HP,8481B 13
HP,8484A 13
HP,8494/5B 14
HP,8494B 14
HP,8494B-8496B 14
HP,8495B 14
HP,8495D 14
HP,85021A 13
HP,85032B 9
HP,8508A 12
HP,8562A 8
HP,8563E 8
HP,8591E 8
HP,8593E 8
HP,8594E 8
HP,8594E-G 8
HP,8648B 7
HP,8648C 7
HP,8648D 7
HP,8753D 9
HP,8753ES 9
HP,8757C 9
HP,8757D 9
HP,8903B 13
HP,8920A 11
HP,E4407B 8
HP,E9300B 13
HP,E9300H 13
HP,ESG-D3000A 7
HP,ESG-D4000A 7
HP,J2302B 16
HP,J3446C 16
HV DIAGnostIcs
HVD,HVA30-DC/VLF 23
HVD,HVA60-DC/VLF 23
HYDRoLAB
HYD,QT-MP-A 74
HYDRAmotIon LtD UK
HYL,V700S-21 50, 75
HYDRoLoGIcAL seRVIces
HYS,OSSB1 64
Icc
ICC,LD400 20
ICC,LD408 20
IcetecH
ICE,LV48 6
InteRnAtIonAL LIGHt
ILI,1400ABC 68
InVensYs
INV,MPS48DC2400W 4
Ion scIence
ION,GASCHECK3000 69
Isc
ISC,ITX-STD 73
ISC,MDU420 73
ISC,MG140 73
ISC,MX6 73
ISC,TMX412 73
IsHI
ISH,CCS3025 50
mAsteR InstRUments
ISI,BATTPACK-EXT 60

IsI
ISI,IR777 60
Isco
ISK,6700-730 75
IVI3
IVI,IE35-2P 70
JenoPtIc
JEN,LEM300-GEO 45
JoFFRA
JOF,1200SE 56
JOF,C650 57
JOF,LPC-NATA 57
JAcoBs RADIo
JR,CT-005 35
JUmo
JUM,1030-0-10BAR 44
JUM,40BAR 44
KIKIsUI
KIK,TOS-5051 24
KIK,PLZ1002W 36
KInGFIsHeR
KIN,KI7822B-7600A 18
KIN,KI7827B-7600A 18
KRAUtKRAmeR GmBH &co
KRA,DMS 53
KRA,DYNAPOCKET 54
KRoHn-HIte
KRO,3550 13
KULIte
KUL,HEM375-5000 44
KURZ
KUR,2443-24 65, 67
KYoRItsU
KYO,8031 36
KYO,PSM8031 36
LABec
LAB,OTWMD18 58
LAncom
LAN,SERIES2-6 72
LAPLAce
LAP,RF-CLAMP 11
LAP,SA1000 11
LeIcA
LEI,DISTOPRO 45
Lem
LEM,ANALYST-2060 29
LEM,CURRENT PROBE10A 35
LEM,LEM-FLEXII 35
LEM,MEMOBOX300 30
LEM,SATURN GEO EASY 25
LEM,SATURN100+ 25
LEM,SATURN-GEO-X 25
LEM,SATURNISO 24
LEM,TOPAS1000 30
LEM,UNIGOR355 3
LEM,UNIGOR380 3
LAnDIs AnD GYR
LG,FIC-51E 35
LIneAR
LIN,LSPC-1 52
LIon
LIO,SD-400P 71
mAcHIDA
MAC,FB5-1400A 47
mADGe tecH IncoRPoRAtIon
MAD,SHOCK101 51
mARconI
MAR,2945 11
MAR,2945A 11
MAR,6910 (M) 13
MAR,6912 (M) 13
MAR,6913 (M) 13
MAR,6920 (M) 13
MAR,6923 (M) 13
MAR,6970 13
MAR,ARGUS2 60
MAR,PSCI424-585 32
mecmesIn
MEC,AFG-1000N 49
MEC,AFG-1000NALC 49
MEC,TW60 49
meGGeR
MEG,10-01-10KV 23
MEG,BM11D 24
MEG,BM21 24
MEG,BM25 24
MEG,BM80 24
MEG,CBT2 24
MEG,CM500 24
MEG,DET/3R 25
MEG,DET2/2 25
MEG,DET20C 25
MEG,DET4TD 25
MEG,DET5 25
MEG,DLRO10 23
MEG,DLRO-10X 24
MEG,DLRO200 24
MEG,DLRO600 24
MEG,FT6/12 33
MEG,LT330 EN-AU 24
MEG,LTW335-FLIT 24
MEG,MIT1020-10KV DIT 23
MEG,MMC850CLAMPMETER 34
MEG,MPP1002-FAULT PP 19
MEG,PA9PLUS 31
MEG,RCDT330 24
MEG,S1-1052 10KVDIT 23
MEG,S1-552 5KVDIT 23
MEG,SK-MDP3 23
MEG,TDR1000 19
MEG,TDR2000 20
MEG,TDR2000/2RM 20
memmeRt
MEM,ULE400 58
mettLeR
MET,15KG 50
MET,60KG 50
MET,PB8001 50
metReL
MET,IT3017INSTALTEST 24
MET,MI2121AUS 24
metRIX
MET,MX200 32
MET,MX2040 32
MET,MX51EX 3
MET,MX53 3
MET,MX54 3
MET,MX55 3
metRosonIcs
MET,PF-1-F 29
mIKRon
MIC,M90Z 59
KonIcA-mInoLtA
MIN,CL-200 69
MIN,T-1 69
mIneLAB
MIN,SD2000 61
mItUtoYocoRPoRAtIon
MIT,S-211 53
MIT,SJ201-NATA 53
MIT,293-330 53
MIT,500-172 45
monARcH InstRUments
MON,PALMSTROBE 45
MON,PLT200-KIT 45
moRIteX
MOR,2CMOUNT 47
MOR,CAM-MOUNT 47
MOR,FDT 35
MOR,MSGI-1350 47
MOR,PALMSCOPE 47
nARDA
NAR,705-69 14
NAR,8217 10
NAR,8616 10
nAtIonAL InstRUments
NAT,GPIB-USB-HS 2
noYes
NOT,OFS300 19
noVAtecH
NOV,1637-5 73
NOV,1637-5CGA 73
oHAUs
OHA,EXP4100 50
oLson InstRUments Inc
OLS,FTG 54
oLYmPUs
OLY,G100-034-090 55 47
OLY,IF11D4-20 47
OLY,IF8C5-30 47
OLY,IPLEX-MX 47
OLY,IV6C6-20-ZOOM 47
OLY,IV76X2-AT50S TIP 47
OLY,IV8C6-35 47
OLY,IV8D3-20 47
OLY,VIDEO 47
omIcRon
OMI,CMC156-3 32
OMI,CMC256-6 33
OMI,CMC256-6 EP 32
OMI,CMGPS 32
OMI,CPC100PTS 32
OMI,C-PROBE1 32
oPtALIGn
OPT,BUG 61
OPT,OPTOLOG 61
oRIon
ORI,VPDC 48
Anton PAAR
PAA,DMA35N 50, 74, 75
PAnAmetRIcs
PAN,25DLHP 53
PAN,26MG 53
PAN,2CHRT-1-1 64
PAN,2CHRT-1-2 64
PAN,36DLPLUS 53
PAN,37DL-PLUS 53
PAN,C-LP-40NM 64
PAN,C-PT-10HB 64
PAN,EPOCH-LT 53
PAN,MMS35 61
PAN,OKS 64
PAN,PM880 61
PAN,PT868 64
PAN,PT868-NATA 64
PAN,PT878 64
PAN,PT878-NATA 64
PAN,SOFTWARE 64
PAtHFInDeR
PAT,PF610 19
PoWeR conVeRsIons
PC,300I-24 38
PRomAX
PRO,MC360B 15
PRO,PRODIG-5 15
PRO,PROLINK4C-PREM 15
PcB
PCB,300A20 51
PcWI InteRnAtIonAL PtY LtD
PCW,DC30 53
PCW,P40-PULSE 53
PeARPoInt LtD
PEA,FLEXI-CAM 46
AstRo PRoDUcts
PHA,53550 45
PHILIPs
PHI,PM6666 7
PHYnIX GmBH &co
PHY,SURFIX FN 53
PIeZotRonIcs
PIE,308B 52
PoLYsonIcs
POL,HYDRA-SX30-2 64
PoLARoID
POL,MICROCAM 47
PoPtRon
POP,RF-CCD 61
PPm tecHnoLoGIes
PPM,FORM400 73
PRImAYeR
PRI,OMIKRON-AG 20
PRoceQ sA ZURIcH
PRO,2000-ND 54
PRoteK
PRO,3201 10
PRO,3290 6
PRO,3290 10
PRotImeteR
PRO,CMIII 54, 61
PRO,SM 54, 61
PRoGRAmmA PRoDUcts
PRO,EGIL-CB ANALYZER 33
PRO,MAGNUS-2.2KV 32
PRO,SVERKER760 33
PRoceQ
PRO,EQUOTIP 54
PRO,LR 54
PRotAG
PRO,ITX125VA-RCD 23
PRO,TAG-PRINTER 26
Ge PRotImeteR PLc
PRO,MMS-PLUS 54
PRoFometeR
PRO,PROFO-4 54
scALAR coRPoRAtIon
PRO,SCA-12770 47
PRUFtecHnIK
PRU,AL12.116 51
PRU,MAG-BRKT 51
PRU,ROT-ULTRA 51
PVL - UK
PVL,CLIMA3 65
RADIoDetectIon
RAD,AFRAME FORRD4000 20
RAD,CLAMP-ANT 20
RAD,FLEXISONDE 20
RAD,GATORCAM-25-30 46
RAD,R-404850 13
RAD,RD4000TYPE7KIT 20
RAD,RD400PXL 20
RAD,STETH-L 19
RAD,SUPERSONDE 20
RAe sYstems
RAE,MR2000 73
RAYteK
RAY,MX4+ 59
RAY,MX6 59
ReDILIne
RED,DA3179 38
ReDLAKe
RED,MOTIONMETER 48
RED,S1000 48
ReLIABLe PoWeR meteRs
REL,1600 30
RIon
RIO,CP-10 52
RIO,NL-04 70
RIO,NL-05 71
RIO,NL-11FP 71
RIO,NL-31 71
RIO,NL-32 71
RIO,NL-32RTA-NATA 71
RIO,VA-10 52
RIO,VA-11 52
RIO,VM82 52
RoBInson
ROB,543 35
RotRonIc
ROT,HTO45R001V 45
RoHDe & scHWARZ
R&S,NRT 13
R&S,NRT-Z43-Z44 13
RS,EFA43 15
RS,FSH3-TG 8
RS,FSH3-TG-V 9
RS,FSH6-TG 9
RS,FSH-Z1 13
RS,HL013 10
GUAnGZHoU sAt InFRAReD
tecHnoLoGY co LtD
SAT,S160 60
SAT,TRIPOD-FIT 60
soLA BAsIc
SB,0610-2000A 37
SB,0610-2000VA 37
SB,210-26-725 37
SB,625-3000VA 37
SB,625-BATT 37
SB,67-102-8 37
scHILtKnecHt
SCH,MINI-2 67
se InteRnAtIonAL
SE,MONITOR 4 10
SEV,TORTUSII 71
seAWARD eLectRonIc LtD (UK)
SEW,EUROPA PAT 25
SEW,EUROPAPLUS 25
SEW,PAC3760 26
SEW,PT-300 26
SEW,TROLLEY-3760PKIT 25
SEW,XE3760PKIT+ 26
scHAFFneR
SFN,438 11
SFN,BEST+ 11
SFN,INA-6502 11
SFN,MODULA 6100 11
scHAeVItZ
SHA,P1241-10000 45
SHA,P1241-500 45
SHA,P53363-500 45
SHA,P3061-4D 44
sHImADZU
SHI,20/0-1 35
SHI,UV-1240 75
sHoRtRIDGe
SHO,ADM-860 67
SHO,CFM88-3 67
sI PRessURe InstRUments
SI,HTP1 57
SI,PC6-1000-NATA 57
SI,PC6-20-NATA 57
SI,PC6-40-NATA 57
SI,PC6-700 57
SI,PC6-700-NATA 57
SI,PC6-PRO 350 57
SI,TP1-40 57
sIeRRA InstRUments UsA
SIE,S100-5 65
sILVeRADo PF136 PoRtABLe
FIBRescoPe
SIL,PF136 47
sImco
SIM,SS2X 3
smc
SMC,PTE-100-C 36
sonIcLeAn
SON,2000HT 58
sonAtest GRoUP
SON,T-GAGE-IV+ 53
soRensen
SOR,DCR10-120B 4
SOR,DCS60-50 4
sPectRonIcs
SPE,ERASER2 6
sPIRent
SPI,SMB200-10/100 16
SPI,SMB600 16
SPI,SMB6000 16
SPI,SMB600-3101A 16
SPI,SMB600-3201B 16
SPI,SMB600-3310A 16
stAnFoRD ReseARcH
SR,SR720 5
steWARt BUcHAnAn
STE,10000-NATA 48
STE,1000-NATA 48
STE,5000-NATA 48
tHeRmo sPectRonIc UnIcAm
SUV,EPSILON1 75
sVAnteK
SVA,912A 51
SVA,948 51
SVA,949 51
SVA,SV06A 51
sWIse
SWI,COLOR 61
stRYKeR
SYK,4-30-ARTHRO 47
t&R test eQUIPment PtY LtD
T&R,200A3PHEDIT 36
T&R,200ADM 36
T&R,CIT 36
T&R,DSM200 24
T&R,DVS3-HP 33
T&R,KV30-40 33
T&R,PCU1/E 36
T&R,PCU1-SP NLU5000A 36
TA,CBI 68
teGAm
TEG,3550 5
teKtRonIX
TEK,1503 20
TEK,1503C 20
TEK,AFG3022 5
TEK,AFG3102 5
TEK,ASG100 13
TEK,DPO4054 2
TEK,P5200 2
TEK,P6015 2
TEK,P6158 2
TEK,TDS2014 1
TEK,TDS2024B 1
TEK,TDS3052B 1
TEK,TDS3054 1
TEK,TDS3054B 2
TEK,THS730A 2
TEK,TPS2014 1
TEK,WAVESTAR 2
temPo
TEM,508S 19
testo
TES,177-H1 40
TES,177-T4 40
TES,300M (AU/NZ/MY) 72
TES,325-1 72
TES,325M 72
TES,335 72
TES,350 73
TES,350XL 73
TES,445 68
TES,450 68
TES,560-2 69
TES,635 (NZ/MY) 68
TES,635-2 68
TES,645-1 68
TES,845 59
teXceL PtY LtD
TEX,ATM 52
tInY tAG
TIN,SHOCKSET 51
tRAnsLocK InDUstRIes
TLI,BTM2-LTM2 52
toPcon
TOP,BM-9-2 69
TOP,IM-2D 69
TOP,IM-2D-NATA 69
TOP,IM-5-NATA 69
tPs
TPS,90FL-T 74
TPS,REDOX 74
TPS,WP-80 74
TPS,WP-82 74
TPS,WP-84 74
TPS,WP-88 74
tecHRentALs
TR,CT-5 43
TR,M05 35
TR,PRESS-NATA 48
TR,RF-CONN 13
tRAFAG
TRA,230-115 38
TRA,8204-1D-20A 45
TRA,8891-4-10V 44
TRA,8891-4-20A 44
tRAFFIc PRo
TRA,RETAILPACK 61
tRenD
TRE,AURORA-SONATA 15
KenWooD
TRI,PD35-10D 4
TRI,PD35-20 4
tsI
TSI,4040-6 65
TSI,4143-6 65
TSI,8324 68
TSI,8345 68
TSI,8355 68
TSI,8370 67
TSI,8371 67
TSI,8373 67
TSI,8375 67
TSI,8384 68
TSI,8386A 68
TSI,8520 68
TSI,8520-1 68
TSI,8525 68
TSI,8554 68
TSI,8705 67
TSI,8710 67
TSI,SP730 71
ttI, UK
TTI,CPX-200LPS 4
Ue sYstems Inc
ULT,UP100KT 20
UnImeAsURe
UNI,6526B-21 64
UNI,6526B-21LCD 64
UNI,P510-40 48
UNI,P75-3C 35
UNI,P75-3C HYBRID-DP 35
UPsonIc PoWeR PtY LtD
UPS,BATTERY BANK-7AH 37
UPS,IH3000 37
UsB
USB,232CONVERTER 2
VAIsALA
VAI,HMP-135Y 45
VAI,HMP-235Y 45
VAI,WAA151 67
VALHALLA
VAL,4300B 24
VAn essen
VAN,TD30 75
VARIAc
VAR,3000 37
VAR,6500-3 37
AUstRALIAn RectIFIeRs
VAR,D-283-OB 37
VeGA
VEG,BAR20-1 45
VIsHAY
VIS,2100 41
WeInscHeLL
WEI,33-10-34 14
WEI,34-30-34 14
WEI,46-03-34 14
WEI,46-06-34 14
WEI,46-10-34 14
WEI,46-20-43 14
WEI,82-30-34 14
WEI,AS20 14
WEI,AS6 14
WEI,M2-20 14
WAnDeL & GLoteRmAnn
WG,ANT20 15
WG,GIGABIT 16
WG,OMK14 18
WG,OMK-6 18
WoHLeR
WOH,MINISPRING 46
WOH,VIPER CAMERA KIT 46
WOH,VIS2000 46
WOH,VIS220 46
WOH,VIS230-S CAMERA 46
WOH,VIS250-S CAMERA 46
WYLeR
WYL,CL45 48
XAntReX
XAN,XKW60-50 4
XAN,XSRF600-4 4
X-RIte
XRI,SP60 75
YAmAHA
YAM,EF3KISE 38
YAM,Y16 18
YAM,Y80 18
Yes
YES,205-5 67
YoKoGAWA
YEW,2215 35
YEW,2255-01 35
YEW,2261-01 35
YEW,2553 6
YEW,2554 6
YEW,3057-22 43
YEW,3712-31 43
YEW,3712-41 43
YEW,3750 43
YEW,3750-DC 43
YEW,3760 43
YEW,CW140 32
YEW,DA100-40CH 40
YEW,DL1540L 2
YEW,DL708E 41
YEW,DR130 43
YEW,MEM512 43
YEW,MV200 40
YEW,ORM1200 41
YEW,ORM1300 41
YEW,ORP1200 41
YsI
YSI,550A 74
YSI,55D 74
YSI,63-10 74
77

78
general index
a
AC
see Electrical Power
Accelerometer 51
Acoustic Spectrum Analysis 70
Adhesion Tester
Air
53
Compressor Output 65
Flow 65
Quality
Air Conditioning
66
Coolant Flow 64
Electronic Manifold 69
Measurement 66
Valve Balancing
Air Quality
69
Monitoring 66, 73
Particles 66
Temperature & Humidity 66
Air Velocity Meter 65, 67
Alcohol Breath Analyser 71
Alignment 51
Ammeter 34
Amplifier Instrumentation 41
Anemometer 66
Angle Measurement 36
Antenna & Cable Test 9, 56
Antennas 10, 20
Appliance Tester 25
Area Heat Stress 66
Audio Analyser 13
Autoclave Logger 39
Automotive Testing
b
52
Balances 50
Balancing Machinery 69
Balancing Machinery Analyser 51
Balometer 66
Barometric 60
Barometric Recorder
Bath
60
Constant Temperature 55
Ultrasonic 58
Bit Error Rate (BERT) 15
Blast Logger 52
Body Vibration Measurement 51
Bore Hole Depth 75
Bore Hole Water Quality 74
Borescope 46
Brake Tester 52
Bridge LCR 5
c
Cable
Fault Locator 19
LAN Test 17
Locator 17, 19
Tester 17, 19
Cable Locator 19
Cable Tester 19
Cable TV 15
Calibrator
Current 55
Current Loop 55
Dry Block Temperature 55
Electrical 6
Hydraulic 55
Industrial 55
Loop 55
Pneumatic Instruments 55
Pressure 55
Process 55
Resistance 55
Temperature 55
Voltage 55
Caliper 45
Camera
Digital 61
Endoscope 46
High Speed 48
Pipe Inspection 46
Surveillance 61
Thermal Imaging 60
Video 47
Carbon Dioxide (CO 2 ) 66, 72
Carbon Monoxide (CO) 66, 72
Cat 5, 5E, 6 17
CCTV Surveillance 61
Charge Amplifier 51
Chart Recorder 43, 48
Circuit Breaker Analyser 33
Circuit Tracer 19
Clamp Meter 34
Clean Room Monitor 68
Cleaver - Fibre Optic 18
Coating Thickness 53
Coil & Winding Test 22, 25
Combustion Gas Analysis 72
Communications Test Set 11
Compressed Air Flow 65
Compressor Output
Flow 61
Quality 61
Concrete Testing
Adhesion 53
Cover Meter 54
Moisture Meter 54, 61
Reo Depth 54
Test Hammer 54
Conductivity & Salinity 74
Confined Space Entry 72
Counting Scales 50
Crane Scales 49
Current
Clamp 25, 30, 34, 42
DC Source 4
Injection 36
Input Logger 39
Loop 55
Meter 27, 32, 34, 64
Primary Injection 36
Probe 2, 34
Secondary Injection 36
Shunt 34
Transducer 30, 34, 42
Transformer (CT) 27, 31, 34
d
Data Communications
Cable Test 17
Etherscope 16
Fibre Optics 18
LAN Analyser 16
Protocol Analyser 15
WAN Analyser 16
Data Logger 39, 48
DC High Voltage 2, 33
DC Power Supplies 4
Decade Resistance Box 6
Demand Analyser 27, 32
Density Meter 50, 74
Depth Logger 75
Dewpoint 61, 66
Digital Camera 61
Digital Storage Oscilloscope 1
Dimension Measurement 45
Dissolved Oxygen 74
Distance Measurement 45
Distortion Analyser/Generator 13
Dose Meter (Noise) 70
Dust Measurement
e
66
E1/E3 Tester 15, 16
Earth Leakage 22, 27, 33
Earth Tester 25
Electric Motor Test 25
Electrical 21
Electrical Cable Test 22, 33
High Voltage 33
Surge Generator 19
TDR 19
VLF
Electrical Installation & Test
33
Appliance Tester 25
Earth Leakage (RCD) 22, 27, 34
High Voltage Test (Hi-Pot) 24, 33
Insulation Test 21, 33
Phase Rotation 36
Resistance Test 22
Soil/Ground Resistance 22, 25
Electrical Power 21
Electrical Power Generation & Transmission
Current Injection 36
High Voltage Test (Hi-Pot) 33
Power Quality 27
Protection Relay Test 32
VLF Test
Electrical Power Quality
33
Demand Analyser 30
Harmonics 27
Power Factor 27, 36
Power Quality Analyser 27
Voltage Current Recorder
Electrical Power Sources
43
Current Injectors 36
Generator 38
Line Conditioners 37
Programmable 38
UPS 37
Electrical Testers 36
Electrical Transducers 34
Electrochemistry 74
Electrometer 3
Electronics & Data 1
Electrostatic Charge Measurement 3
EMC/EMI Test Equipment 11
Endoscopes 46
Environmental 63
Environmental Chambers/Oven 58
Environmental Noise 70
Ethernet Analyser
f
16
Fault Loop Impdenace Tester 24
Fibre Optic Microscope 19
Fibre Optics 18
Fusion Splicer 19
LAN Cable Test 17
OTDR 18
PMD 19
Power Meter/Light Source
Field Strength Meter
18
Gauss 21
RF 10
Field Strength Meters & Antennas 10
Filters 13
Flash Card 42
Flaw Detector 53
Floor Slip Tester 71
Flow Meters 64
Compressed Air 64
Doppler 64
Gas 63
Liquid 63
Non-Intrusive 64
Open Channel 64
Transit Time 64
Ultrasonic 64
Flue Gas Analysis 72
Flue Inspection 46
Fluorimeter 75
Force Gauge 49
Formaldehyde Meter 72
Frequency Counter 7
Frequency Response Analysers 6
Frequency Transducer 34
Function Generator 5
Fusion Splicer
g
19
Gamma Radiation
Gas
10
Alcohol 71
Carbon Dioxide (CO2) 68, 72
Carbon Monoxide (CO) 68, 72
Flammable (LEL) 73
Formaldehyde 72
Hydrogen Sulphide (H2S) 72
Methane (CH4) 72
Nitric Oxide (NO) 68, 72
Nitrogen Dioxide (NO2) 72
Oxygen (O2) 72
Ozone (O3) 73
Refrigerant 69
Sulphur Dioxide (SO2) 72
VOC 72
Gas Analysis & Monitoring 72
Gauss/Tesla Meter 21
General Industrial 39
Generator (AC) 38
Glossmeter 52
GPIB Interface 2
Ground Vibration 52
Groundwater
h
75
Hardness Tester 54
Harmonics (Power) 27, 31
Heat Stress 66
High Voltage Insulation Dielectrics 23
Hi-Pot Tester 24, 33
Holiday Detector 53
Hot Wire Anemometer
Humidity
66
Chamber 58
Concrete 54
High Temp Probe 44
Indoor Air 66
Logging 39
Natural Gas 61
Recorders 60
Thermohygrograph 60
Transducer 44
Weather 69
HVAC & IAQ 65
Hybrid Recorders 43
Hydraulic Pressure
i
53, 55, 58
Illuminance Meter 69
Inclinometer 48
Indoor Air Quality 66
Infrared Camera 60
Infrared Thermometer 59
Injection Test Set 36
Instrumentation Amplifier 41
Insulation Tester
Intrinsically Safe
22, 33
Current Loop Calibrator 55, 58
Digital Multimeter 3
Gas Monitor 73
Moisture Analyser 61
Noise Dose Meter 70
Photo-Ionisation Detector (PID) 72
Inverter 38
Ionisation Tester 33
ISDN
l
15
Laboratory Oven
LAN
58
Analyser 16
Cable Certification 17
Cable Tester
Laser
17
Distance & Speed 45
Level 45
LCR Meter
Leak Detector
5
Gas Pipe 20, 69, 72
Microwave Oven 10
Refrigerant 69
Water 20
Light Measurement 69
Light Meter 69
Linear Position Transducer 48
Load Cell
Logger
see also Recorders
49
Accessories 40
Autoclave 39
Data 39, 48

Environmental Noise 70
Explosion 52
Flow 64
Ground Vibration 52
Humidity 39
Oven 39
Pressure 60
Shipping & Transport 51
Temperature 39
Logic Analyser 6
Logic Programmer
Low Frequency
6
Frequency Response Analysers 6
Signal Generator 13
Luminance Meter 69
Lux Meter
m
Machinery
69
Balancing 51
Vibration 51
Magnetic Field Meter 21
Manometer 67
Materials Testing 50, 74
Memory Recorder 41
Metal Detector 61
Methane Monitor 72
Micro-Ohm Meter 22
Microscope 47
Microwave Leakage Detector 10
Microwave Oven Survey Meter
Modified Atmosphere
10
Packaging Test
Moisture
72
Concrete 54, 61
Timber 54, 61
Multimeter 3
Natural Gas
Network Analyser
61
Antenna & Cable Test 9, 56
LAN/WAN 16
Power 27
RF 7, 9, 13
Telecommunications 15
Noise & Sound 70
Noise Dose Meter 70
Noise Logger 70
Non-Destructive Testing (NDT) 51, 53
Non-tripping Loop Tester
o
24
Occupational Health & Safety 69, 71
Air Quality 66
Appliance Testing 25
Confined Space Entry 72
Floor Slip Tester 71
Formaldehyde 72
Heat Stress 66
Lighting 69
Noise & Sound 70
Ozone 72
Radiation 10
Toxic Gas 72
UV Exposure 69
Vibration 51
Oil Insulation Tester
Optical Networking
22, 25
DWDM 19
Optical Spectrum Analysis
Oscilloscopes
19
Digital Storage 1
Portable 1
OTDR 18
Oven 58
Oven Logger 39
Oxygen & CO2 Analyser 72
Oxygen (O2) 72
Ozone (O3) 72
Ozone Monitor
p
72
Particle Counter 66
PAT 25
PCM Test Equipment 15
PDH Analyser 15
People Counter 61
Petrol Generator 38
pH Measurement 74
Phase Angle 36
Phase Rotation Meter 36
Phase Sequence Meter 36
Photo-Ionisation Detector (PID) 72
Pinhole Detector 53
Pipeline Inspection 46
Pitot Tube 67
Plotter Printer 43
Polarisation Mode Dispersion (PMD) 19
Portable Appliance Tester 25
Position Transducer 48
POTS
Power
see Electrical
15
Power Analyser 27, 36
Power Demand Analyser 27, 30
Power Disturbance 27
Power Line Conditioner 37
Power Supplies - DC
Pressure
4
Calibrator 55
Circular Chart Recorder 48
Indic10ator/Gauge 48
Indicator/Gauge 44, 48
Logging Gauge 48
Transducer
Probe
44
Current 2, 27, 32, 34
Digital 42
Frame Relay
High Voltage
16
Line Logic 42
Process Calibrator
Programmer
56
EPROM, EEPROM 6
Protection Relay Test 32
Protocol Analyser 15
Pulse Generator 5
Pulse Porosity Detector 53
Pump
r
55
Radar Speed Gun 45
Radiation Monitor 10
Radiometer 69
Random Noise Generator 13
RCD Test 22
Recorders
see also Loggers
39
Barometric 60
Chart 43, 48
Hybrid 43
Memory 41
Pressure 48
Tape 43
Temperature Humidity 39
Rectifier 4
Refrigerant Leak Detection 69
Relative Humidity
see also Humidity
60
Relay Test
Resistance
32, 36
Calibration 55
Decade 6
Ground/Soil 25
Micro-Ohm 22
Static 22, 25
Tester 22
Retail Traffic Flow Counter
RF & Microwave
61
Accessories 13
Amplifier 7
Antenna/SWR 9, 56
Antennas 9, 56
Attenuator 14
Communications Test Set 11
EMC/EMI Test 8, 10
Field Strength Meters 10
Frequency Counter 7
Function Generator 5
Network Analyser 7, 9
Power Meter 12
Power Sensors 13
Radiation Monitor 10
Sensor 13
Sensor 12
Signal Generator 7, 10
Spectrum Analyser 6, 8
Sweep Generator 7
Voltmeter 12
Rogowski Coil 27, 30
Rotating Balancing 52
Roughness 53
Router Test System 16
RTD Calibrator
s
55
Salinity & Conductivity 74
Scales 49
Scopemeter
Security
1, 2
Bug Detector 61
Metal Detector 61
Surveillance 61
Shaft Alignment 51
Shaker Table
Signal Generator
51
Low Frequency 13
RF 7
Signalling Analyser 15
Smoke Generating Machine 67
Soil Resistivity 22, 25
Sonde 20
Sound 70
Dose Meter 70
Logger 70
Measurement 70
Signal Analysis 70
Sound Level Meter 51, 70
Vibration 51
Spectrophotometer 75
Spectroscopy
Spectrum Analyser
75
Acoustic 70
Optical 19
RF 6, 8
Speed Measurement 45
Splicer - Fibre Optic 19
Startup Current 27
Static Discharge Generator 11
Step Transformer 11
STM1 ... STM65 15
Strip Chart Recorder 43
Stroboscopes 45
Surface Roughness 53
Surge Generator
Surge Transient Generator
19
EMC/EMI Test 11
Survey Equipment 45
Sweep Generator
t
7
Tachometers 45
Tape Recorders 43
TDR
Telecommunications
20
BERT 15
CDMA 13
Communications Analyser 15
Fibre Optics 18
GSM 15
ISDN 15
PDH 15
POTS 15
SDH 15
Signalling Analyser 15
System Tools 15
WAN analyser 16
W-CDMA
Temperature
12
IR Thermometer 59
Logging 39, 75
Recorders 60
Thermocouple 59
Thermometer 59
Tension 49
Test & Tagging 22, 25
Thermal Imaging Camera 60
Thermocouple 59
Thermohygrograph 60
Time Domain Reflector (TDR) 19
Torque Wrench 49
Total Dissolved Solids (TDS) 74
Toxic Gas Monitor 72
Tracking Generator
Transducers
8
Current 30, 34
Electrical 34
Frequency 34
Humidity 44
Instrument Transformer 34
Position 48
Pressure 44, 48
Temperature 44
Voltage 34
Transformer Oil Test 25
Transient Burst
Transport
11
Inclinometers 48
Turbidity 74
TV Test Equipment
u
15
Ultrafine Particle Counter 66
Ultrasonic Bath 58
Uninterruptable Power Supplies - UPS 37
UV Exposure
v
69
V24, V35 16
Valve Balancing (Air Conditioning) 69
Vane Anemometer 66
Variacs 37
VCR
Vibration
48, 61
Accelerometer 51
Analyser 51
Blast Logging 52
Impact Hammer 52
Logging 51
Table 51
Transport Testing 51
Whole Body
Video
51
Endoscope 47
High Speed 48
Microscope 47
Pipeline Inspection
Video Camera
46
Digital 61
VHS 61
Video Security 61
Viscometer 50, 75
VLF MV Cable Test 33
Volatile Organic Compounds (VOC) 72
Voltage Calibrator 55
Voltage Transducer 34
Voltmeter
w
3, 12
Walk Through Metal Detector 61
WAN Analysers
Water
16
Analysis 75
Conductivity 74
Depth 64, 74
Flow 64
Leakage Detection 20
pH 74
Quality 74
Sampling 75
Water/Oil Bath Temp Calibrator 55
Waveform Generator 5
WBGT 66
Weather 69
Wind Speed & Direction
Workplace Safety
68
see Occupational Health & Safety
x
X.21, X.24 16
X-Ray Measurement 10
79

Our strength lies in our strong technical capacity and the
synergies between our different business units.
test & measurement
TechRentals offers specialised test equipment product solutions
for a wide range of industries. Products offered include power
measurement and analysis, general electronic, environmental
and OH&S, plus telecommunications. The leader in the
industrial rental arena for more than 30 years, TechRentals also
offers flexible purchasing options on selected product ranges.
www.techrentals.com.au
www.techrentals.co.nz
www.techrentals.com.my
aud ov sual & bus ness equ pment
Vidcom is raising the standards in the dynamic audiovisual
industry, offering solutions for both long
term equipment procurement and event management.
The New Zealand operation is well established, providing
extensive solutions including video conferencing alongside
the more traditional event AV. The Australian operation, known
as TR Vidcom, focuses on niche markets, such as boutique
events, training and corporate outsourcing solutions for
business equipment.
www.trvidcom.com.au
www.vidcom.com
m n ng commun cat ons
One of a handful of specialist companies worldwide, MineCom
designs and manufactures communications, tracking and
collision avoidance solutions for the demanding mining
sector. The Australian head office in Melbourne is home to
the MineCom manufacturing and R&D facility, and the direct
account management team, which supports our mining
Channel Partner network which extends from Newcastle to
Kalgoorlie, from Chile to Poland.
www.minecom.com
satell te commun cat ons
TR Telecom is the region’s largest satellite telephony distributor,
with a customer support team working from the Australian head
office in Melbourne, and offering comprehensive product sales
and connections to the global Iridium network and Inmarsat.
Our New Zealand operation is also an exclusive reseller for the
Iridium product through TR Telecom.
www.trtelecom.com/satellite
cal brat on
Utilising state-of-the-art technology, our experienced team
delivers calibration and repair services to customers in defence,
manufacturing, aviation and other high tech sectors. Our
calibration group has NATA accredited facilities in both Australia
and New Zealand, plus mobile calibration labs operating as
needed to meet customers’ on-site demands.
www.vms.net.au
rad o commun cat ons
As Asia Pacific’s most awarded radio communications group,
Bearcom supplies commercial communications solutions to
major companies and government. With a reputation built on
delivering quality, Bearcom offers renowned brands such as
Motorola in Australia and Tait in New Zealand, plus Navman
fleet management. Solutions include product sales, systems
engineering, service and maintenance, and equipment rentals
to many of the region’s major international events.
www.bearcom.net.au
www.bearcom.co.nz
w reless connect v ty
A distributor of wireless connectivity solutions for large scale
commercial applications, TR Telecom has built a strong
Australasian Channel Partner network comprising leading IT&T
experts. Also a member of the WiMax Forum, our product suite
comprises both leading edge and field-proven technologies.
www.trtelecom.com/wireless

austral a
1800 632 652
www.techrentals.com.au
new zealand
0800 832 473
www.techrentals.co.nz
malays a
603 5632 1135
www.techrentals.com.my
Your trusted partner in technology.
Offering innovative solutions through
our leading brands: