Preset Counters, electronic - Multiprox

Preset Counters, electronicLED Preset Counters – Type 572Position- and Difference DisplayAC/DC00000065max.60 kHz24/17... 260 30 V DIN 48 x 961 MHz 1 126/8 LEDs1 2 3 4 6 10 ... 5/24V 30VDC mA, V42Supply voltageAC/DC panelfrequency with gloves RS422-InputDIN front High IP value High Operation TTL, HTL and 6/8 LEDs 2 x Sensor OutputsupplyDCOUTTransistor-Output00000RS232RS 422485InterfaceInnovative:• 2 separate freely scalable count inputs -HTL or TTL; Both also with invertedinputs, max. input frequency1 MHz/ channel• Very bright LED display 15 mm high (6digit) and 10 mm high (8 digit)• 4 freely programmable fast solid-stateoutputs, each with 350 mA outputcurrent• Step or tracking preset• Simple programming – with functioncodes, dependent on the operatingmode selected• With 8 different permanent count functions,such as simple count, differencecount and total count of both inputs,batch counters etc.RoHSCompact:• Up to 3 display values in a single device,Display Counter 1, Display Counter 2 aswell as the display calculated fromCounter 1 and 2• AC and DC supply voltages in one device• Simple programming with 4 keys, all keyscan be assigned dual programming functions.• 4 fast solid-state outputsVersatile:• Can be used as a counter or positiondisplay with limit values• Monitoring function, where 2 values aremonitored or calculated with respect toeach other• 4 fast programmable inputs with variousfunctions such as reset, gate, displaymemory , reference input or switchingbetween the display values.• Scalable analogue outputs 0/4 ... 20 mA,+/-10 V or 0 ... 10 V• 2 auxiliary power supplies for sensors:5.2 V DC and 24 V DC• Standard interface RS 232- for parameter setting- for reading out the values to a PC or PLC- for modifications during operationApplication examples:s =s0 +s1 + s2s0 s1 s2Encoder 1 Encoder 2Count 1 Count 2d = s1 - s2ds1s2Encoder 1 Encoder 2Count 1 Count 2OS2 software for parameter setting can bedownloaded at www.kuebler.comCounter series for demanding applications,with two individually scalable encoderinputs, in each case A, A, B, B for countfrequencies up to 1 MHz per channel. Operatingmodes can be selected for positionor event counter, total counter, differencecounter, cut-to-length display, diameter calculatorand more.Reset, Preset, Inhibit ...Total-Position displayReset, Preset, Inhibit ...Difference-Position displayMeasuring wheelCut pulseEncoder 1Accessories for DIN rail mountOrder code: G 300 005Encoder 1Encoder 2Alarm 1Alarm 4Encoder1 Encoder 1Encoder 2MotorMeasurement of the effective cut amountMonitoring of torsion, shafts or gear breakage144 www.kuebler.com 6/2009

Preset Counters, electronicLED Preset Counters – Type 572Supply voltage:- 24 V AC, + 10%24 (17 ... 30) V DCCurrent consumption [DC]: 100 mA + Current consumption encoderConnected load [AC]: 15 VAAuxiliary power supply 2 x 5,2 V DC, each 150 mAoutput for sensors: 2 x 24 V DC, each 120 mADisplay:15 mm high LED-Display, 6 digit10 mm high LED-Display, 8 digitInputs:2 universal incremental encoder inputsCount frequency: RS422 and TTL with inv. 1 MHzHTL asymmetric 200 kHzTTL asymmetric200 kHz(per encoder)Control inputs:4 control inputs HTL, Ri = 3,3kOhmlow < 2,5 V, high > 10V,min. pulse duration 50 µsSwitch outputs:4 fast power transistors 5 ... 30 V DC350 mA, reaction time < 1ms*, inductiveloads require a freewheeling diodeSerial interface:RS232, 2400 ... 38400 BaudAnalogue outputs: 0/4 ... 20 mA, load max. 270 Ohm0 ... +10 V (max. 2 mA)Resolution 14 Bit, precision 0,1 %reaction time < 1 msAmbient temperature: 0 ... 45 °C [32 ... 113 °F]Storage temperature: -25 ... +70 °C [-13 .... 158 °F]Housing:Noryl UL94-V-0Protection class: IP65 (front side)Screw terminal: Cable cross-section max. 1,5 mm 2Conformity and norms: EMV 89/336/EWG: EN 61 000-6-2EN 61 000-6-3NS73/23/EWG EN 61010-1Weight:ca. 250 g*Intensive serial communication can temporarily prolong the reaction timePreset CountersDimensions:Electrical connections:GeberGeberApplication examples:encoder 1Example shows encoderwith 5 V-supply and TTL/ RS422-outputencoder 2DigitalcontrolinputsSupply voltagefastswitch outputsfastanalogue outputsOrder code specification:Position display, 6 digits, with 4 fastswitch outputs and serial interface:Position display, 6 digits, with 4 fastswitch outputs and serial interfaceand scalable analogue outputs:Position display, 8 digits, with 4 fastswitch outputs and serial interface:Position display, 8 digits, with 4 fastswitch outputs and serial interfaceand scalable analogue output:Delivery contents:• Controller 572• Gasket, fastening set6.572.0116.D056.572.0116.D956.572.0118.D056.572.0118.D95• Instruction manualGerman/English6/2009www.kuebler.com 145