CORRECTIONS - R. Nicholls Distributors

CORRECTIONS 

Always at your side in the line of duty

2 


R.Nicholls • www.rnicholls.com • 450.442.9215 

TABLE OF 

CONTENTS 

Armour ..........................................................p.3-5 

Apparel ..........................................................p.6-10 

Bags ...............................................................p.11 

Batons & Accessories ...............................p.12-14 

Duty Gear ......................................................p.15-16 

Drug and Explosive Detection..................p.17-24 

Exothermic Cutting Torch ........................p.25-28 

Flashlights ....................................................p.29-30 

Firearms Training Tools ............................p.32-33 

Firearms Unloading Station .....................p.31 

Firearms P2000 Parts .............................p.34-35 

Handcuffs and Keys & Rings ....................p.36-42 

Helmets .........................................................p.43-45 

Less Lethal ...................................................p.46-61 

Metal Detectors .........................................p.62-65 

Mirrors ..........................................................p.66 

Night Vision / Thermal / Light ...............p.67-69 

Protective Equipment ................................p.70-73 

Restraints ....................................................p.74-78 

Shields ...........................................................p.79-80 

Spinet and Transport Nets ......................p.78 

Small Arms Pistols .....................................p.81 

Small Arms Ammunition ...........................p.82-84 

Small Arms Carbine and Optics ..............p.85-86 

Training Equipment ....................................p.87-89 

Training Ammunition ..................................p.90-91

Always at your side in the line of duty! 

Model NIJ Model# 

PRISM ® SERIES 

Threat 

Type 

Areal 

Density 

Thinness 

V50 

(9mm) 

V50 

(.40 Cal) 

V50 

(.357 Mag) 

V50 

(.357 Sig) 

V50 

(.44 Mag) 

PS 1.0 PS 1.0 Spike 1 0.29 0.079 — — — — — 

PS 2.2 PS 2.2 Spike 2 0.42 0.098 — — — — — 

PS 3.0 PS 3.0 Spike 3 0.58 0.118 — — — — — 


The Second Chance Prism Series provides stab and multi-threat (stab and ballistic) protection for the Corrections market. Featuring woven aramid Corrections material, 

the Prism Series provides a spectrum of product offerings in all protection levels and most threat types. 

PRISM – SPIKE 

• NIJ Standard-0115.00 approved 

• Trusted Corrections armor as part 

of the Second Chance legacy 

• Stab protection for the Corrections environment 

• Spike 1, Spike 2 and Spike 3 protection levels 

• Lightweight and flexible utilizing Twaron ® MicroFlex ® 

Corrections material 

PRISM – MULTI-THREAT 

• NIJ Standard-0101.06 and 0115.00 approved 

• Trusted multi-threat armor as part of the Second Chance legacy 

• Combined ballistic and stab protection for the Corrections environment 

• Optimum ballistic stopping power with patented Curv ® Technology 

• Lightweight and flexible utilizing Twaron ® MicroFlex ® Corrections material 

Model NIJ Model# 

Threat 

Type 

MT21 MS-2020S-MT21 II/Spike 

2 

MT01 MS-3A30S-MT01 IIIA/ 

Spike 3 

Areal 

Density 

Thinness 

V50 

(9mm) 

V50 

(.40 Cal) 

V50 

(.357 Mag) 

V50 

(.357 Sig) 

V50 

(.44 Mag) 

1.29 0.353 1663 1723 — — — 

1.44 0.410 — — — 1810 1695 

CONCEALABLE 

CARRIERS 

• Detachable shoulder and side 

straps for infinite adjustability and comfort 

• Both vests are available with front and rear plate pockets 

• Accommodates the PROTECH line of IMPAC special threat plates 

• Available Colors: Black, Navy, White, Tan, Brown, Gray and Olive 

TACTICAL ASSAULT 

CARRIERS 

• Available with a full range of spike and 

multi-threat armor solutions 

• Both vests are available with front and 

rear plate pockets 

• Accommodates the PROTECH line of IMPAC special threat plates 

• Available Colors: Black, Navy, White, Tan, Brown, Gray and Olive 

TACTICAL CARRIERS 

• PROTECH Rapid Response Carrier offers a 

high-speed entry vest for optimum mobility 

• Duty belt compatible with the ability to carry 

equipment loads 

• Compatible with standard tactical accessories 

• Available Colors: Black, Tactical Green, 

Digital Woodland, Navy, Ranger Green, Khaki, MultiCam ® , 

Digital Urban Camo and ACU 

R.Nicholls • www.rnicholls.com • 450.442.9215 3


4 

SPECIFICATIONS 

FOR PURCHASE OF BODY ARMOR 

Multi-Threat Vest 

CBA / CIP 

Level II / 2 

Test Standard 

Combination Concealable style armour manufactured 

to NIJI 0101.04 Ballistic Level II and NIJ 0115.00 Stab Level 2 

Model 

CBA / CIP 

Threat Level 

Multi-Threat II / 2 

Configuration 

Unstructured 

Material 

Ballistic – Twaron Superflex 2000, 840 Denier Lincoln Fabric Style 3517 

Stab – DuPont Kevlar Corrections 200 Denier Lincoln Fabric Style 3041 

Panel Covering 

Nylon Linebacker Water-resistant coated fabric 200 denier 

Ballistic Pass Results 9 MM 

371 meters per second 

(average velocity) 

Ballistic Pass Results .357 

434 meters per second 

(average velocity) 

Stab Drop Results 

Pass. 

Independent Ballistic / Stab Tests 

Performed by Bosik Technologies Ltd. 

Ottawa, Ontario 



Ballistic Wrap around Body Armour 

Our concealable wraparound vest offers a high degree of coverage 

for the chest, back, and sides, in a soft flexible design that can be worn 

comfortably. The front panel wraps around the body to meet the back 

panel under the arms, providing excellent coverage. 

Manufactured from DuPont Kevlar® 129-840 or 

Twaron® Superflex 2000 fabric in 840 denier. 

Comes complete with a poly/cotton cover in sizes S, M, L, XL. 

Individual measurements are required for body armour. 

CBAIIA Men’s, with Poly/Cotton Cover, Level IIA 

CBAII Men’s, with Poly/Cotton Cover, Level II 

CBAIIIA Men’s, with Poly/Cotton Cover, Level IIIA 

FMBAIIA Women’s, with Poly/Cotton Cover, Level IIA 

FMBAII Women’s, with Poly/Cotton Cover, Level II 

FMBAIIIA Women’s, with Poly/Cotton Cover, Level IIIA 

Ballistic & Stab Wraparound Body Armour 

CBA/CIP Men’s, Level II Ballistic & 

Level II Stab Protection 

CBA/CIP/CM Men’s, Level II Ballistic & 

Level II Stab Protection with CoolMax Cover 

CBA/CIP/N Men’s, Level II Ballistic & Level II Stab 

Protection with OPP Style Vest Carrier 

CBA/CIP/MAW Men’s, Level II Ballistic & Level II Stab 

Protection for Mawashi Protective Suits 

FMBA/CIP Women’s, Level II Ballistic & 

Level II Stab Protection 

FMBA/CIP/CM Women’s, Level II Ballistic & Level II Stab 

Protection with CoolMax Cover 

FMBA/CIP/N Women’s, Level II Ballistic & Level II Stab 

Protection with OPP Style Vest Carrier 

FMBA/CIP/MAW Women’s, Level II Ballistic & Level II Stab 

Protection for Mawashi Protective Suits 

Stab Wraparound Body Armour 

Manufactured from DuPont Kevlar® Correctional 159-200 denier fabric 

IP1 Stab protection Level I 

IP2 Stab protection Level II 

IP3 Stab protection Level III


Over The Shirt Carrier with ID flap 

A removable carrier for wraparound vests made of heavy duty nylon with 

two breast pockets and with “pull-out” POLICE panel on front. Features 

Velcro closure on each side. Available in sizes S, M, L, XL. 

OPP/VC/BLK Black 

OPP/VC/NB Navy Blue 

OPP/VC/BRN Brown 

OPP/VC/GRN Green 

Maintained 

THE CORRECTIONS BRAND 


Protech Corrections is the industry’s first brand solely focused on 

understanding and defeating the daily threats faced by Correctional 

officers everywhere. 

• PROTECH Corrections offers spike, bullet-, and multi-threat 

armor package that are durable and cost-effective. 

• Certified by the NAtional Institute of Justice. 

• Products: CRV, Persuader, Prisoner transport vest, CAPS 

(Corrections Arterial Protection System) 



JACKET EA1FC 

The Evin ‘’All-in-1’’ event! 

A uniform system that provides Waterproof Breathable protection for every 

situation and more. 

• Reversible 

• Side Opening 

• Fleece Inner Jacket 

• Wear the navy outer alone in wet weather 

• Add inner fleece vest for cooler weather 

• Add fleece sleeves to the inner layer for maximum cold protection 

• Machine Washable 

Reverse EA1FC to CSA Lime, combines full Waterproof Breathable comfort with certified 

CSA visibility in the stormiest weather. Add the same inner fleece combinations, 

to provide flexible protection from the cold, while maintaining full CSA visibility. 

Wear the fleece alone, when the time is right, as a jacket or vest. Wearing provides 

the dependable comfort and utility of the Telescopic Sleeves system, as well as all 

the other thoughtful features that will keep you healthy and effective in your work. 

Hi-Vis side has CSA Z96-02, Class 2 visibility with 2’’ 3M heat transferred silver 

reflective striping on Hi-Vis Lime. Its Hiptex 3000 barrier is Waterproof Breathable, 

with taped seams. 

Hiptex 3000 Waterproof Breathable Reversible Combo with Fleece Jacket 

• Navy Hiptex 3000 Taslan reverses to 

• Lime CSA Z96-02, Class 2 Taslan. 

• Fleece Jacket (with zip-off sleeves) 

• Can be worn alone or as a liner for the reversible outer jacket. 

6 

EVIN 



JACKET EA2FC 

The Evin ‘’All-in-1’’ event! 

A uniform system that provides Waterproof Breathable protection for every 

situation and more. 

• Outer JACKET REVERSIBLE 

• Perfect for cold weather 

• Machine Washable 

• Waterproof Reversible Combo 

FLEECE INNER JACKET 

....provides added warmth as a liner to the reversible outer jacket (connects to either 

side), or can be a stand alone jacket. It has Supplex nylon yokes, front and back, 

and reinforcing sleeves, which close with knit cuffs. Can be worn with or without zip 

off sleeve. Front pockets and 2 inner pockets are zipper closing. Front zipper (with 

inner storm flap) zips to collar points for complete throat protection. 

8 in 1 

Outer Jacket With Inner Fleece Fleece Alone 

• Alone • Jacket • Jacket 

• Vest • Vest


TACTICAL PANT 

You demand a lot from your pants when you’re on the move. Like nine pockets for 

everything from your smartphone to your multi-tool. Ripstop fabric for maximum 

breathability and strength. An elastic waistband for comfort. And with our innovative 

wallet “pocket in a pocket” you’ll appreciate not sitting on your wallet all day 

long. 

• Fade, shrink and wrinkle resistant 

• DuPont Teflon® fabric protector repels stains and liquids 

• Includes D-ring for keys or tools 

• Extra-large belt loops designed for nylon duty belt 

• Action-stretch waistband for enhanced comfort 

• Reinforced seat and knee 

• Zipper fly with sturdy snap closure 

• Nine-pocket design 

• Two hook and loop back pockets with wallet “pocket in a pocket” 

• Two front pockets with reinforced opening for folding knife or tool clip 

• Internal openings for knee pads 

• Two hidden coin pockets 

• Comes with a FREE matching belt 

MEN ’S I F5243-50 

6.5oz. 65% polyester/ 35% cotton ripstop I Imported 

black 001, charcoal grey 015, grey 020, sheriff’s brown 200, 

coyote 236, khaki 250, olive 330, LAPD navy 450 

MEN ’S I F5220-82 

8.5oz. 65% polyester/ 35% cotton canvas I Imported 

black 001, khaki 250, olive 330, dark navy 405 

30 - 44 even sizes (30, 32, 34, 36 inseam options) 

28, 46 - 56 even sizes (37.5 unhemmed*) 

WOMEN ’S I F5249-50 

6.5oz. 65% polyester/ 35% cotton ripstop I Imported 

black 001, charcoal grey 015, grey 020, sheriff’s brown 200, 

coyote 236, khaki 250, olive 330,LAPD navy 450 

WOMEN ’S I F5236-82 

8.5oz. 65% polyester/ 35% cotton canvas I Imported 

black 001, khaki 250, olive 330, dark navy 405 

*FREE hemming on open inseams 

2 - 24 even sizes (36.5 unhemmed*) 

KHAKI 


001 015 

020 

200 

236 250 330 

450 

Cell phone pocket large 

enough to hold a smartphone 

Reinforced front pocket 

opening prevents ripping 

and fraying 

Tactical pant 

comes with free 

matching belt 

LAPD 

NAVY 



TACTICAL SHIRT 

• Fade, shrink and wrinkle resistant 

• DuPont Teflon® fabric protector repels stains and liquids 

• Hidden collar stays provide a clean, professional look 

• Shoulder epaulets with buttons 

• Two box-pleated chest pockets with hook and loop closure 

• Two zippered chest pockets 

• Hidden zipper (mock button) front for ease of use 

• Gusseted underarm increases range of motion 

• Includes optional badge tab 

• Reinforced elbows (long sleeve version) 

MEN ’S SHORT SLEEVE I F5311-50 

4oz. 65% polyester/ 35% cotton ripstop I Imported 

black 001, charcoal grey 015, grey 020, sheriff’s brown 200, coyote 236, 

khaki 250, olive 330, LAPD navy 450 

XS - 4XL Regular 

MEN ’S LONG SLEEVE I F5312-50 

4oz. 65% polyester/ 35% cotton ripstop I Imported 

black 001, charcoal grey 015, grey 020, sheriff’s brown 200, coyote 236, 

khaki 250, olive 330, LAPD navy 450 


S - 3XL Long 

001 015 

020 

200 

236 250 330 

450 

8 

Hidden zipper closure 



OLIVE 

KHAKI


BDU SHIRT 

The BDU Shirt is designed to tuck into the BDU Trouser to create a durable, multi-use 

uniform. The pocket flaps and collar are fused to keep the shirt looking professional 

even after multiple washes. Felled side seams and sleeves give the shirt extra 

durability where it counts. 

SHORT SLEEVE I F5456-38 

Battle Rip® 65% polyester/ 35% cotton ripstop 

Made in Dominican Republic 

black 001, dark navy 405 

• Shoulder epaulets with buttons 

• Two front cargo pockets with hidden button flaps 

• Covered button front 

• Extended length for tucking into pant 


S - 3XL Long 

LONG SLEEVE I F5452-38 

Battle Rip® 65% polyester/ 35% cotton ripstop 


black 001, grey 020, dark grey 024, sheriff’s brown 200, khaki 250, 

olive 330, dark navy 405, LAPD navy 450 

LONG SLEEVE I F5452-12 

60% cotton/ 40% polyester twill 


black 001, dark navy 405 

• Two-piece, double-reinforced elbows 

S - L S hort 


S - 3XL Long 

OLIVE 

DARK NAVY 




The second generation for EMS & Station 

EMS & STATION 

Standard classification: NFPA 1999-2008 

CAN/CSA-Z195-2009 

ASTM F 2413-2005 

Art. No.: 605109 

Upper Material: Waterproof Leather 

Color: Black 

Leg height: 8 inches 

Inside: CROSSTECH 

Sole: Airpower® R 

Sizes: 4 1/2 - 15 & half sizes 

Widths: Medium, Wide, Extra Wide 

Chem Bio certified boot 

10 



AIRPOWER ® R2 

Upper Material: 

soft and supple waterproof leather, hydrophobic, breathable, 1.8 – 2.0 mm thick 

HAIX® Climate System 

Moisture Barrier: 

CROSSTECH®footwear waterproof, breathable, bacteria and chemical resistant, 

bloodborne pathogen resistant 

Inner Lining: 

CROSSTECH®footwear, 4 layers, with inner Cambrelle® lining especially abrasion 

resistant, softly padded with breathable foam 

Footbed: 

anatomically formed, quick change, machine washable insert with excellent 

moisture absorption and quick drying qualities 

Insole: 

anatomically formed, Texon (fleece) absorbs moisture and supports ankle 

Protective toe cap: 

anatomically formed protective toe cap to meet ASTM F 2413-05, CAN/CSA Z 

195-2002 standard for personal protection - protective footwear 

Protective flexible midsole: 

stainless, cast into the sole, to meet ASTM F 2413-05, CAN/CSA Z 195-2002 

standard for personal protection - protective footwear 

Sole: 

newly developed extremely slip resistant rubber sole with polyurethane 

damping wedge, self cleaning tread, non-marking, oil and fuel resistant, with 

antistatic characteristics 

Other: 

anatomically formed and softly padded tongue, integrated heel bend, raised tip, 

patented HAIX® Lacing System: combined lacing and zipper unit, exchangeable, 

antistatic, reflective zone in the heel and instep bend 

HAIX® AS System: 

the Arch Support System features built in arch support


D1 

Patrol Duty Bag 

For all your essential gear, the D1 is constructed of 840 denier, waterresistant 

nylon with PVC backing and features heavy-duty zippers and 

removable nylon web shoulder strap. 

•The spacious interior compartment has an adjustable divider and 

removable rigid bottom, two zippered cargo pockets and six 

pen/pencil pockets 

•The exterior features two zippered cargo pockets, two flip-top 

pockets, and three open-top pockets 

•Hook and loop straps on the padded top can secure a baton 

or flashlight 

•Dimensions: 25”L x 10”W x 12”H (63.5 cm x 25.5 cm x 30.5 cm) 

- Interior compartment 18”L x 8”W x 12”H (45.7 cm x 20.3 cm x 30.5 cm) 

BLACK •D1 (BLACK) BLUE •D1 (BLUE) 


G3 


Giant SWAT Bag 

The G3 has a large open-cavity design for carrying a wide variety of gear. 

•Construction consists of a 600 denier, water resistant polyester shell 

with PVC backing and heavy-duty reinforced handles and straps 

• Nylon web carry handles are on both the sides and ends 

•The G3 may be worn as a backpack using the 2 inch wide (5 cm) padded 

adjustable straps affixed to the bottom 

•The exterior features two zippered mesh end pockets and a total of 

five clear vinyl map/document pockets on the top and sides 

• The interior has four expandable zippered mesh pockets, four zippered 

pockets and one zippered pouch with padded walls for fragile gear 

•Dimensions: 41.5”L x 14”W x 12”H (105.4 cm x 36 cm x 35.5 cm) 

E4 

ExoTech Carry Bag 

• Weight: 8 lbs 

• Constructed of 1000 denier Cordura nylon 

• Nylon web carry handles are on both sides and ends 

• Features a separate helmet section 

• Padded shoulder strap 

• Dimensions: 40”L x 15”W x 16”H (102 cm x 38 cm x 41 cm) 

- Large interior compartment: 26”L x 15”W x 16”H 

(66 cm x 38 cm x 41 cm) 

- Small interior compartment: 14”L x 15”W x 16”H 

(36 cm x 38 cm x 41 cm) 



AUTOLOCK ® 

STRENGTH YOU CAN COUNT ON 

• Patented locking mechanism ensures the baton will stay locked open while 

striking, blocking or jabbing 

• Open passively or in a high-profile manner 

• Closes with a push of a button—no need to strike the baton on the ground; 

easy to open with either a flick of your wrist or a simple pull to achieve a 

passive draw 

• Rotating shafts help maintain control of the baton during a struggle 

• 18”, 21”, 22” and 26” (45.72 cm, 53.34 cm, 55.88 cm and 66.04 cm) 

• Choose from a variety of tips and grips 

• Lifetime repair or replacement guarantee 

• Made in the USA 

TIPS 

FINISHES 

GRIPS 

12 

Safety Tip ® Power Safety Tip ® 3xT Tactical Training 

Targeting Tip (Lime Green) 

Black Chrome Nickel 

Foam Grip Super Grip ® 



AUTOLOCK ® 

FRONT DRAW ® HOLDER 

• 360˚ swivel capability and 8 locking positions. 

Also available in 45˚ locking versions 

• Multi-position clip-on holder with molded tension 

springs for baton security 

• Concave molded bottom to accommodate Power Safety Tip ® 

3034 

3634 

HINDI 

BATON CAP 

• Provides added baton retention 

• Easier to pick up the baton off a flat surface 

• More effectively draw baton from holder 

• Fits 21” / 22” AutoLock® batons 

6213 

PATENTED 

9130 

PATENTED


AUTOLOCK JR. ® 

AUTOLOCK ® BLACK CHROME FINISH 

AUTOLOCK ® BLACK CHROME FINISH 

Part No. Length Weight Grip Style Tip Style 

AUTOLOCK ® NICKEL FINISH 

• Operates just like any other AutoLock® baton, but in a miniature size 

• Grooved handle allows for added baton retention 

• Power Safety Tip® creates greater follow through momentum when 

performing a strike 

• Great for personal protection, whether in Law Enforcement, Corrections or any 

other setting in which concealment is a primary requirement 

• Available in Flat Black finish 

• Holder available - Bianchi Model 7311 

Holder 

Plain 

9170 18" (45.72 cm) 19 oz. (.54 kg) Foam Grip Power Safety Tip ® 3042 3642 

9172 18" (45.72 cm) 19 oz. (.54 kg) Super Grip ® Power Safety Tip 3042 3642 

9120 21" (53.34 cm) 19 oz. (.54 kg) Foam Grip Safety Tip ® 3030 3630 

9141 21" (53.34 cm) 19 oz. (.54 kg) Super Grip Safety Tip 3030 3630 

9130 22" (55.88 cm) 22 oz. (.62 kg) Foam Grip Power Safety Tip 3034 3634 

9152 22" (55.88 cm) 22 oz. (.62 kg) Super Grip Power Safety Tip 3034 3634 



AUTOLOCK ® NICKEL FINISH 

Part No. Length Weight Grip Style Tip Style 

Holder 

Plain 

9220 21" (53.34 cm) 19 oz. (.54 kg) Foam Grip Safety Tip 3030 3630 

9241 21" (53.34 cm) 19 oz. (.54 kg) Super Grip Safety Tip 3030 3630 



*45 degree locking holders also available 

9010 


Holder 

Basketweave 

Holder 

Basketweave 

9152 

9230 

AUTOLOCK ® JR. 

Part No. Length Weight Grip Style 

9010 9.5" (24.13 cm) 10 oz. (.28 kg) Grooved 



FRONT DRAW ® 

FOR AUTOLOCK ® BATONS 

• Designed with clip-on backs specifically for the AutoLock batons; also available 

in slide-on versions; design allows holder to slide off belt without having to strip 

the whole belt 

• Made from durable polycarbonate, all holders feature a molded tension spring 

for baton security 

• Rotates 360˚ and locks in one of 8 locking positions; also available in a 

version that rotates only 45˚ forward and backward 

• Baton may be re-holstered in the locked position either open or closed, as 

necessary, saving time to control the suspect 

• Accommodates either the Foam grip or Super Grip ® 

• 21” (53.35 cm) baton holder has the half-moon bottom for Safety Tip ® 

style batons 

• 18” (45.72 cm), 22” (60.96 cm) and 26” (66.04 cm) baton holders have 

a concave bottom to be able to receive the Power Safety Tip® style baton 

• Available in high or low carry models 

• Fits 2.25” (58 mm) belt widths; 

• Finishes: Plain, Basketweave 

Note: It is important to choose the appropriate holder for the 

style of AutoLock used. This is to facilitate the ability of 

the officer to put the baton in the holder while in the 

locked open position 

14 

See www.safariland.com 

for full list of models 

3034 

PATENTED 



HOLDERS 

Monadnock offers a wide selection of baton holders in different styles and materials to fit the needs of each 

of its batons. Safariland and Bianchi Duty Gear also offer baton holders for several Monadnock baton styles. 

FRONT DRAW ® 

FOR PR-24 ® , CLASSIC FRICTION LOCK & 

STRAIGHT EXPANDABLE BATONS 

• Offered with clip-on or slide-on backs; design allows holder to slide off belt 

without having to strip the whole belt 

• Made from durable polycarbonate, all holders feature a molded tension spring 

for baton security 

• Rotates 360˚and locks in one of 8 locking positions; also available in a version 

that rotates only 45˚ forward and backward 

• Baton may be re-holstered in the locked position either open or closed, as 

necessary, saving time to control the suspect 

• Accommodates either the Foam grip or Super Grip ® 

• 21” (53.35 cm) baton holder has the half-moon bottom for Safety Tip ® 

style batons 

• 18” (45.72 cm), 22” (60.96 cm) and 26” (66.04 cm) baton holders have 

a concave bottom to be able to receive the Power Safety Tip ® style baton 

• Available in high or low carry models 

• Fits 2.25” (58 mm) belt widths 

• Finishes: Plain, Basketweave 

See www.safariland.com 

for full list of models 

3011 

PATENTED 

3627 

PATENTED


3144X 

313XX 

31304 31306 31305 


CSC DUTY GEAR 

Bianchi Patroltek Belts & Accessories (Nylon) 

CODE MODEL DESCRIPTION PRICE 

3144X Bianchi 8110 Duty belt 2” 18.50$ 

313XX Bianchi 8106 Liner Belt 14.50$ 

31304 Bianchi 8006 Belt Keepers (Set of 4) 7.50$ 

31306 Bianchi 8007 MK4 OC Holder 10.50$ 

31305 Bianchi 8007 MK3 OC Holder 10.50$ 

31300 Bianchi 8000 Handcuff Case 10.50$ 

31460 Bianchi 8012 Expandable Baton Holder 10.50$ 

31317 Bianchi 8013S Swivel Expandable Baton Holder 28.75$ 

31313 Bianchi 8016 Silent Key Holder 8.00$ 

25406 Bianchi 8044 Slimline Double Mag Case 19.50$ 

31404 Bianchi 8014 Universal Radio Case Holder 17.75$ 

31311 Bianchi 8014S Universal Radio Case Holder (Swivel) 21.00$ 

31316 Bianchi 8028 Flat Glove Holder 9.00$ 

4325-X-4CSC Safariland – Nylon Buckleless Reversible Belt 1.5" (38 mm) 

31300 31460 31317 31313 25406 31404 31311 

31316 



CSC DUTY GEAR 

CODE DESCRIPTION PRICE 

6360-97-131-2 Holster ALS R/H 92.50$ 

6360-97-132-2 CODE Holster DESCRIPTION ALS L/H CODE 92.50$ DESCRIPTION PRICE 6360-97-132-2 Holster ALS L/H 

PR 

4110-76-4BL 

6360-97-131-2 

6360-97-132-2 

Double Mag Pouch 

Holster ALS R/H * 

Holster ALS L/H CODE 

22.00$ 

4110-76-4BL Double Mag Pouch 

9141 Monadnock 92.50$ Baton Autolock with Safety Tip and Super Grip 

6360-97-131-2 

6360-97-132-2 4110-76-4BL 

DESCRIPTION 3030 Monadnock 92.50$ Front Draw Holder PRICE 

94. 6 

20.5 

4110-76-4BL 

9141 

Double Mag Pouch 

Monadnock Baton Autolock with Safety Tip and Super Grip 

22.00$ 

94.50$ 

24. 

CODE 

9141 

DESCRIPTION 


PRICE 

94.50$ 

3030 Monadnock Front Draw Holder 20.50$ 

CODE 

9141 

24.50$ 

3030 

DESCRIPTION 


PRICE 

94.50$ 

3030 Monadnock Front Draw Holder 6210 

The ALS 

6210 

20.50$ 

9141 

24.50$ 

3030 

9141 

® PRICE 

92.50$ 

92.50$ 

6210 

3030 Monadnock Front Draw Holder 

6210 

9141 

22.00$ 

6360-97-131-2 

6360-97-132-2 4110-76-4BL 

for HK P2000 model 

6210 

* Available for other pistol models. Call us for more information. 

system is the latest 

PRICE 

evolution in retention holsters 

and builds upon the success- 

h Safety Tip and Super Grip 94.50$ 

ful Self Locking System (SLS). 

20.50$ 

With several patents to its 

24.50$ 

credit, the key to this system is an 3030 internal locking device that 

1- The ALS is a unique design that locks into the ejection port 

and is operated by the thumb once the SLS is released. 

2- The SLS rotating hood has been tested and proven for 

many years on the 6280 and 6004 series of holsters. 

Simply push down and rotate forward as you obtain your 

shooting grip. To close, pull back on the hood, and the SLS 

secures the weapon in all directions simply upon reholstering. 

self locks. No snaps or straps to manipulate. 

Level III Retention is achieved when used in conjunction with the 

3- The Hood Guard helps protect the SLS from impact and 

SLS, which can also be elevated to Level IV Retention with the 

6210 

addition of the Sentry. Also available in Level I Retention and 

9141 

premature release, especially in an attempted takeaway. 

Included with all duty and tactical versions. 

Level II Retention versions. Additionally, holsters with this ad- 

4- Constructed of SafariLaminate, a thermal-molded 

vanced ergonomic design are completely operable with the thumb, 

holster to help protect the handgun and gun mounted 

making training easy, and the straight-up draw makes them very 

instinctive to use, yet difficult for an assailant’s attempted takeaway. 

And finally, once the retention devices are released, the 

weapon can be drawn straight out of the holster with no twisting or 

other motion required. The ALS series holsters cover a wide array of 

market needs, from retention duty holsters to models in our popular 

tactical offerings to a belt loop, belt clip and paddle holster for the 

accessories for years of use. 

concealment markets, both with and without the SLS. 

6365 DUTY 6305 TACTICAL 6342 EDW 6377 CONCEALMENT 

16 


CODE DESCRIPTION PR 

6360-97-131-2 Holster ALS R/H 92. 

6360-97-132-2 Always at Holster your ALS side L/H in the line of duty! 92. 

4110-76-4BL Double Mag Pouch 22. 

6360-97-131-2 

CODE DESCRIPTION PRICE 

6360-97-131-2 Holster ALS R/H 92.50$ 

6360-97-132-2 Holster ALS L/H 92.50$ 

4110-76-4BL Double Mag Pouch 22.00$ 

6360-97-131-2 

CODE DESCRIPTION 

6360-97-132-2 4110-76-4BL 

6360-97-131-2 Holster ALS R/H 

3030 Monadnock Front Draw Holder 20.50$ 

6360-97-131-2 

24.50$ 6360-97-132-2 3030 

4110-76-4BL 

CODE DESCRIPTION 

9141 Monadnock Baton Autolock with Safety Tip and Super G


Real-time Explosives and Narcotics Trace Detection 

Features and benefits: 

• Non-radioactive ion sources eliminate licensing, inspection, transport, 

and end-of-life issues 

• Automatic, continuous self-calibration adjusts to environmental changes 

• No operator intervention 

• No calibration traps 

• Fast clear-down, typically 10 seconds or less, means more sampling 

and less waiting 

• Rapidly detects and identifies explosives and narcotics 

• Low maintenance design delivers low total cost of ownership 


QUANTUM SNIFFER 

QS-B220 

Bench-top Explosives & 

Narcotics Trace Detector 

QUANTUM SNIFFER TECHNOLOGY 

The Quantum Sniffer QS-B220 provides fast, accurate detection of trace amounts 

of a wide variety of military, commercial, and homemade explosives, as well as 

narcotics with unsurpassed ease of use and minimal maintenance requirements. 

Incorporating Implant Sciences’ patented non-radioactive Ion Mobility Spectrometry 

(IMS) analysis technology, the QS-B220 brings new levels of performance and 

convenience to bench-top trace detection users. 

LOWER TOTAL COST OF OWNERSHIP 

Operation and maintenance expenses are extremely low with the QS-B220. 

Routine maintenance consists only of care and cleaning using common supplies and 

desiccant replacement, as required. 

No radioactive material is used in the QS-B220, so there are no certification, 

licensing, inspection, transportation, or end-of-life disposal issues. 

ACCURATE AND EFFICIENT 

The Quantum Sniffer performs real-time detection with fast clear-down. When 

detection occurs, the QS-B220 provides audio and visual alarm indications, 

including substance identification, on the integrated high resolution color touch 

screen. Authorized users can also access spectrogram display and analysis, 

administrative, and diagnostics tools through the touch screen interface. 

Automatic and continuous self-calibration prevents errors that could 

result from an uncalibrated instrument. The QS-B220 monitors its 

environment, senses changes that would affect its analysis, and 

recalibrates without user intervention, calibration consumables, 

or system down-time. 



QUANTUM SNIFFER 

QS-B220 

Bench-top Explosives & Narcotics Trace Detector 

QS-B220 SYSTEM CHARACTERISTICS 

Detector Type Ion Mobility Spectrometer (IMS) with non-radioactive 

ionization 

Analysis Time Less than 10 seconds 

Clear-down Time Less than 10 seconds (typical) • No user intervention 

Sample Acquisition Particulate collection via wiping 

Power 100-240 VAC, 47-63 Hz 

Warm-up Time 30 minutes maximum 

Operating Temperature -10° C to 55° C (14° F to 131° F) 

Operating Altitude 4,572 m (15,000 ft) 

Operating Humidity 0 to 95% non-condensing 

Product specifications and descriptions are subject to change without notice. 

18 



Substances Identified Explosives: Military, Commercial, and HomeMade 

Explosives (HMEs) including: Ammonium Nitrate, 

ANFO, Black Powder, C-4, Detasheet, Detonating 

Cords, Dinitrotoluene, DMNB, Dynamite, EGDN, HMTD, 

HMX, Nitroglycerin (NG), Peroxides, PETN, RDX, 

Smokeless Powder, Tetryl, Triacetone Triperoxide 

(TATP), Trinitrotoluene (TNT), Urea Nitrate, Semtex 

Narcotics: Cocaine, Heroin, THC, Methamphetamine, 

L-amphetamine, MDMA, MDA, Morphine, Ketamine 

Additional substances can be added through user 

expandable detection library 

Alarm Method Configurable visible and audible alarms 

Substance identification by name 

Data Display 12.5 in high-resolution color touch screen display 

Expandability and External VGA port 4 USB 2.0 ports for optional 

Connectivity keyboard, printer, mouse and barcode scanner. 

RJ-45 Ethernet network port supports control station 

monitoring, remote control, and remote diagnostics. 

Calibration Automatic and continuous self-calibration 

Dimensions 11 in x 12.5 in x 13.5 in 

(280 mm x 318 mm x 343 mm) 

Weight 2.5 lbs (14.8 kg) 

Consumable Materials Low cost molecular sieve drying agent high durability 

sample traps 

Additional semi-annual preventative maintenance 

supplies may be required 

The QS-B220 has been granted “Developmental Testing & Evaluation Designation” as a Qualified Anti-Terrorism Technology by the U.S. Department of Homeland 

Security pursuant to 6 U.S.C. § 441-444 (the Support Anti-terrorism by Fostering) 

Effective Technologies Act of 2002, or “SAFETY Act”) and 6 C.F.R. § 25.4(f) (2006) (Regulations Implementing the SAFETY Act).


6071-A Box of 10 

6072-B Box of 10 

6073-C Box of 10 

6074-D Box of 10 

6075-E Box of 10 

6076-F Box of 10 

6077-G Box of 10 

6078-H Box of 10 

6089-I Box of 10 




20 

6079-J Box of 10 

6080-K Box of 10 

6081-L Box of 10 

6082-M Box of 10 

6083-N Box of 10 

6090-O Box of 10 



6084-P Box of 10 

6085-Q Box of 10 

6086-R Box of 10 

6091-T Box of 10 

6087-U Box of 10 

6088-W Box of 10


60000398 Master-Pac (130 Tests) 




22 


Always at your side in the line of duty!





24 



WILCOX’S ® PATRIOT • Exothermic Cutting Torch Module 




WILCOX’S ® PATRIOT • Exothermic Cutting Torch Module 


26 



WILCOX’S LINE OF MINI CUTTING TORCH SYSTEMS 


Document #� TDS030 

Revised: 03/10/11 

Page 1 

Mini Cutting Torch 

System with 56 Cu In 

Cylinder and 

CGA Charging Port (PN: 

40400G04) 

Wilcox’s Line of 

Mini Cutting Torch Systems 

Mini Cutting Torch System 

with 95 Cu In Cylinder and 

CGA Charging Port (PN:� 

40400G03) 

Wilcox Industries Corp. 

25 Piscataqua Drive 

Newington, NH 03801 


PROUDLY MADE 

IN THE USA 

The Wilcox line of Mini Cutting Torch Systems utilizes oxygen as a fuel source to perform 

utility cutting. These torch systems provides an expedient alternative when other 

methods of breaching are inappropriate for technical or tactical reasons. This system 

features a distinct advantage over competitor products in that they are very light weight, 

low profile, and scalable to meet a variety of mission requirements. It also easily 

integrates with the Wilcox Portable Oxygen Supply System (sold seperately) for easy 

on-site cascade charging to accommodate larger jobs. 

Features: 

�� Allows the Breacher to Melt or Burn 

Through Objects for Gaining Entry to 

Secured or Confined Spaces. 

�� Utilizes Torching Rods of Various 

Lengths to Generate an Exothermic 

Burn. 

�� Polycarbonate Handle Resists the Heat 

Generated by the High Temperatures of 

Exothermic Operation. 

�� Carry Pouch is Black for Covert Use. 

�� Green Oxygen Supply Hose Conforms 

to DOT Color Coding Standards for 

Oxygen Products. 

Kit Configurations Available 

(PNs 40400G09—95 cu in; 40400G11—56 cu in) 

Specifications: 

Weight� (with Oxygen): 

40400G03 8.42 lbs. 

40400G04 6.21 lbs. 

Dimensions: 

40400G03 4.14 in. DIA x 19.5 in. H 

40400G04 3.52 in. DIA x 11.0 in. H 

Cylinder Capacity (3,000 PSI): 

40400G03 11.3 cu. ft. (325.0 L) 

40400G04 6.66 cu. ft. (190.5 L) 

VOICE 603-431-1331 

FAX 603-431-1221 

E-MAIL marketing@wilcoxind.com 

WEB www.wilcoxind.com 


WILCOX’S LINE OF MINI CUTTING TORCH SYSTEMS 


28 

Document #� TDS030 

Revised: 03/10/11 

Page 2 

The Wilcox Line of Mini Cutting Torch Systems provide the 

following features: 

Mini Cutting Torch Systems: 

1) A� Flow Valve Adjuster located within the tip of the Cylinder Valve 

allows the O2 flow to be adjusted. 

2) A� Cylinder Valve allows the breacher to secure the cylinder when not in 

use 

3) Pressure Gauge displays remaining cylinder pressure in 1,000 PSI� 

increments. 

4) Quick Disconnect attachments on the cylinder and Torch Handle allow 

the hose to be quickly disassembled. 

5) Pressure Relief Valve releases O2 in the event that the Second Stage 

Regulator becomes overpressurized. 

6) CGA� Charging Port is quickly accessible for O2 charging. A threaded 

cap secures the port when not in use. 

7) Light weight Composite Cylinder stores up to 3,000 PSI of Oxygen. 

8) A� Carry Pouch provides a secure waist attachment and removable 

carry strap. A locking pull string at the top secures the cylinder in 

place within the pouch. 

9) Torch Handle features locking trigger assembly that prevents 

accidental ignition when dropped, and accommodates rod sizes of 

1/4”� and 3/8” 

10) A� light-weight Velcro carry pouch pocket allows the breacher to stow 

the torch handle when not in use. 

11) Burst Valve ruptures to release O2 from the cylinder in the event that 

the the cylinder becomes overpressurized. 

12) Quick Disconnect attachments on the cylinder and Torch Handle allow 

the hose to be quickly disassembled. 

1 

3 

2 

Mini Cutting Torch System - Manifold Assembly 

(Depicted with CGA Charging Port) 

Order Numbers: 

40400G03 Mini Cutting Torch System with 95 CI Cylinder, 

CGA 

40400G04 Mini Cutting Torch System with 56 CI Cylinder, 

CGA 

40400G09 Mini Cutting Torch Kit with 95 CI Cylinder, CGA 

40400G11 Mini Cutting Torch Kit with 56 CI Cylinder, CGA 



Wilcox’s Line of 

Mini Cutting Torch Systems 

4 

5 

6 

INSERT TORCH ROD 

INTO TIP OF TORCH 

HANDLE AND 

ROTATE TIP CW TO 

SECURE (RODS SOLD 

SEPARATELY). 

Wilcox Industries Corp. 

25 Piscataqua Drive 

Newington, NH 03801 

Torch Handle Assembly 

PROUDLY MADE 

IN THE USA 

Mini Cutting Torch System with 95 CI� Cylinder and 

CGA� Charging Port (PN 40400G03) 

VOICE 603-431-1331 

FAX 603-431-1221 

E-MAIL marketing@wilcoxind.com 

WEB www.wilcoxind.com 

This brochure does not constitute an offer or commitment to sell. © 2008-2011 Wilcox Industries Corp. Other aspects of the Wilcox Mini 

Cutting Torch Systems are Patent Pending. WILCOX ® is a registered trademark of Wilcox Industries Corp. Modular by Design TM and 

Hellboy TM are trademarks of Wilcox Industries Corp. All rights reserved. Printed in USA. Contact Wilcox for Warranty Statement. 

8 

10 

4 

9 

7


FLASHLIGHTS 

INOVA T1 LITHIUM POWERED 

LED FLASHLIGHT 

The INOVA T1® is a compact high performance, palm sized LED flashlight, 

small enough to fit in a uniform pocket, but powerful enough to shoot a 

beam up to a far-reaching 394 feet. 

ANSI/NEMA FL1 STANDARDS 


PRODUCT INFORMATION 

Powered by 2-123A lithium batteries, the T1 has a patented optical system that 

provides thermal management while harnessing and projecting a powerfully 

bright (120 lumens) uniform focused spot with flood beam. Engineered with 

the professional in mind, the T1 has a patented tactical end-cap switch activates 

constant and momentary High, Low, Strobe, and Lockout modes. With a precision 

machined, aluminum body from solid bar stock and military-spec Type III hard 

coat anodized black finish; the T1 also features an aggressive knurling pattern for 

positive grip. It’s the ideal size flashlight under any circumstance. 

PRODUCT DETAILS 

• LED Color: White 

• Lumens: High - 120 | Low - 16 

• Run Time: High 5 hours | Low 38 hours 

• Effective Range (up to): 394 ft (120 m) 

• Battery Type: 2-123A Lithium Batteries included 

• Impact-Resistant Head protects optical system 

• Mineral Glass optical window has double-sided AR-coating and Teflon ® seal 

to withstand environmental pressures 

• High-powered energy efficient 50,000 hour LED 

• Electronically controlled for uniform light output 

• Patented optical system machined aluminum reflector for optimal thermal 

management and beam projection. 

• Uniform focused spot with flood beam pattern 

• Aerospace-Grade Aluminum Body from solid bar stock with military-spec, 

Type III hard coat anodized finish 

• Aggressive knurling for positive grip 

• Color Available: Black – Type III hard coat anodized finish 

• Shockproof, crushproof and water-resistant construction 

• O-Ring compression sealing throughout 

• Tactical end-cap switch activates constant and momentary High, Low, 

Strobe, and Lockout modes 

• Generous size lanyard hole for added security and transport options 

• Dimensions (Length x Diameter): 4.56” (11.58 cm) x 1” (2.54 cm) 

• Weight: 3.99 oz. (113 g) 

• Limited Lifetime Warranty USA 



FLASHLIGHTS 

LITE HOLSTER STRETCH 

With its two side panels of superior quality elastic, our durable, 

ballistic nylon Nite Ize Lite Holster Stretch expands to keep flashlights 

from AAA to D secure and safe at your side. 

30 



PRODUCT INFORMATION 

With its sturdy construction, molded foam insulation, and high-quality elastic side panels, 

our Lite Holster Stretch keeps flashlights of nearly every size safe at your side. In its relaxed 

state, a mini AAA flashlight is snug and secure, and the panels expand to provide a close fit 

for larger flashlights up to and including wide D cell models. Because its “over and under” 

clip rotates 360 degrees and locks in eight different positions, our Lite Holster Stretch also 

doubles as a useful hands-free device—angle up to see, read, or work with both hands 

on anything above waist level, or downward to illuminate your footpath in dim light. Openended 

design allows easy access to the flashlight’s tail cap. 

PRODUCT DETAILS 

• Rugged Holster for AAA, AA, L123, C & D cell flashlights – 

fits from 5/8” to 1 ½” diameter barrels. 

• Durable rotating clip fits belts up to 2-3/8 inches wide 

• External Case dimensions: 5.85” x 2.0” x 1.6” 

These FLEXLITE work lights are rechargeable devices that produce high 

luminosity, designed to give wide angle lighting that will illuminate a 

technician’s entire work area. Unlike conventional flashlights which give 

a narrow beam, our products diffuse light equally over 130 °. 

These products have been designed for maximum endurance in industrial environments. The FLX2L2 and 

FLX3L4 models are designed to be worn on a helmet or on the chest using an optional harness. Its very bright 

lighting covering 130° and its powerful battery pack are impressive. 

Possible configuration options include: • “quick connect” connecters • magnetic mount adapter • harness 

and clip tailored to your needs • wall charger adapter The extremely lightweight light head and independent 

battery pack ensure freedom of movement and user comfort. 

The performance of our lightweight FLEXLITE’s far exceeds industry standards. 

• SEARCH AND RESCUE 

• EMERGENCY UNITS 

• HIGHWAYS 

CHEST LIGHT SYSTEM HELMET LIGHT SYSTEM 

Code : FLX2L2H110 Code : FLX34B110


Portable Bullet Trap 

The Portable Bullet Trap (PBT) is designed to be used as a low-priced 

safety device for protection against accidental discharge of a weapon 

during loading or unloading of the weapon. 

FEATURE: 

• Prevent penetration and ricochet of the selected weapons 

• Lead absorbing 

• Low cost and light weight 

• Wall or table top mountable 

• Integral mounting bracket and lifting handle 

• Dimensions: 6” W x 9” H x 10” L 

• Weight: 14 lbs. 

TESTING: 


The Portable Bullet Trap has been ballistic tested to the following cartridges: 

• 9mm 116gr FMJ 

• 44 MAG 240gr JHP 

• 7.62mm 148gr FSJ M80 (Rifle) 

For Hand Guns and Rifles 

PBT-1 Portable Bullet Trap 

PBT-ST Optional Stand 

WARNING: 

The barrel of the gun must be aimed towards the centre of the chamber. 



32 




LONGGUNS 




34 



P2000 V5 I EXPLODED VIEW



P2000 V5 



Model 8210-0 

Compact Spare Cuff 

• Compact version of Spare Cuff 

• User friendly, easy to carry and store 

• Ideal backup to steal handcuffs; can be carried in back pocket, 

briefcase, glove compartment, etc 

• Available in White and Black 

Model 8210-1 

FLEX-CUF Restraints 

• The Flex-Cuf was designed to be a quick, 

temporary alternative to handcuffs 

• Featuring a unique Strength Barb System contained 

within the Flex-Cuf head makes them virtually pickproof 

• The smooth inside surface, combinded with rounded edges, were 

designed to minimize the chance of abrasion or tissue damage 

• Nylon construction offers dimensional stability as well as flexibility 

Model 8210-3 

Spare Cuff 

• Standard single cuff for controlling both wrists/forearms and ankles 

• 22” (55.88cm) when laid flat 

• 1/2” (1.27cm) wide with beveled edges 

to reduce potential for subject injury 

• Tensile strength of more than 400 lbs. (240kg) 

• Ample space for writing down subject information 

• Available in Black & White 

36 



Model 8220-0 

Compact Double Cuff 

• Compact version of Spare Cuff 

• User friendly, easy to carry and store 

• Ideal backup to steel handcuffs; can be carried in pocket, briefcase, 

glove compartment, etc 

• Available in White and Black 

Model 8220 

Double Cuff 

• The Double Cuff features gives the officer greater control and 

the ability to stabilize the subject after one cuff is in place 

• Two individual cuffs rather than the standard sinfle cuff 

for controling both wrists/forearms and ankles 

• Standard length is 34” (86.36cm) 

• 1/2” (1.27cm) wide beveled edges to reduce potential for subject injury 

• Ample space for writing down subject information 

• Tensile strength for more than 400lbs. (240kg) 

• Two cuffs in one, which allows for quicker subject control 

• Available in White, Black, Blue, OD Green, Orange, Pink, Purple, 

Yellow, Lime Green and Tan 

Model 8500-1 

Safety Cutter 

• Lever action for smooth cutting of disposable plastic 

• Simple, fast, one-squeeze operation 

• Pocket-sized for easy carry 

• Safety design assures blade cannot be used as a weapon 

• Easy left or right handed use


8112 

Standard Chain Style 

8122 

Standard Hinge Style 

8112-1-31 NIJ CERTIFIED 

• Top-quality, heavy-duty steel construction 

• 18-tooth, 3-retaining-bar system for uncompromising security 

• Positive swing-through action 

• Built-in backloading for fast cuffing 

• Reinforced steel swivels for added strength and durability 

• Available in Nickel and Black 

8112-1-31 NIJ CERTIFIED 

• Solid links connect the cuffs as opposed to 

the roller chain 

• Heavy-duty, solid hinges for reinforced holding power 

• Hinged models provide greater subject control 

• More comfortable feel in your hand 


8112C 

Colored Chain Style 

RESTRAINTS 


Based on a heritage of quality more than two centuries old, Safariland now 

offers the finest, most durable restraints available anywhere in the world. 

Unique security features provide an extra measure of confidence in a comprehensive 

lineup of handcuffs and other restraints. 

8112-2 

Oversized Chain Style 

• 17% larger than the standard model 

• Ideal for restraining larger subjects 

• 18-tooth, 3-retaining-bar system for uncompromising security 




8122-2 

Oversized Hinge Style 

• 17% larger than the standard model 

• Ideal for restraining larger subjects 



• More comfortable feel in your hand 


• All the features of our standard handcuff with added ability to color code subjects 

• Features a durable powder-coat finish 

• Can be used to classify threat levels, ages, agency, medical conditions and other factors 

• Available in Pink, Purple, Green, Blue, Red, Yellow and Orange 



8132 

Rigid Cuff 

• Top quality, heavy-duty, steel construction 

• Added power and control that can only come from a solid bar rigid design 

• 18 tooth, 3-retaining-bar system for uncompromising security 




• Available in Nickel or Black 

8142 

Ultimate Hinge Cuff 

• Heavy-duty construction with oversized rivet heads for added strength 

• 18 teeth – 3 retaining bars with 6 teeth on each bar makes cuffs 

extremely difficult to pick 

• Built-in backloading feature for faster cuffing 

• Leaf spring double locking system is very difficult to defeat 

• True Swing Technology ensures the shackle hits the center of the cuff 

every time 

• Snaps open to a flat profile, then locks into position, 

becoming rigid for use 

• Folds for easy storage 

• Lock and double lock like regular handcuffs using a standard handcuff key 


38 



8121 

Steloy Hinge Style 

• Top quality, heavy-duty, steel and Steloy construction 

• Steloy material makes the handcuff 40% lighter and 

17% larger than standard cuffs 

• Solid links connect the cuffs as opposed to the roller chain 








8111 

Steloy Chain Style 

• Top quality, heavy-duty, steel and Steloy construction 

• Steloy material makes the handcuff 40% lighter and 

17% larger than standard cuffs 





• Available in Nickel or Black





40 



Model Weight Material Finish Minimum Minimum Inside Maximum Inside Maximum Overall Dbl. Keys Made 

Opening Perimeter Perimeter Length Lock Supplied In 

HANDCUFFS 

Model 700 - Chain Link 10 oz./283 gms Carbon Steel Nickel or Blk Oxide 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm 9.3 in./236 mm Yes 2 USA 

Model 750 - Chain Link 10 oz./283 gms Carbon Steel EPP 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm 9.3 in./236 mm Yes 2 USA 

Model 710 - Chain Link 14 oz./397 gms Carbon Steel/Aluminum Nickel or Blk Oxide 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm 9.3 in./236 mm Yes 2 Restricted USA 

Model P010 - Imported Chain Link 10 oz./283 gms Carbon Steel Nickel 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm 9.3 in./236 mm Yes 2 Korea 

Model 700-6X - Chain Link 10.5 oz./298 gms Carbon Steel Nickel 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm 12.5 in./317.5 mm Yes 2 USA 

Model 7030 - Oversize Chain Link 12 oz./340 gms Carbon Steel Nickel or EPP 2.75 in./70 mm 7.5 in./191 mm 10 in./254 mm 10.5 in./266 mm Yes 2 USA 

Model 7030-6X - Oversize Chain Link 14 oz./298 gms Carbon Steel Nickel 2.75 in./70 mm 7.5 in./191 mm 10 in./254 mm 14.25 in./362 mm Yes 2 USA 

Model 7030HS - Oversize Chain Link 16 oz./454 gms Carbon Steel/Aluminum Nickel 2.75 in./70 mm 7.5 in./191 mm 10 in./254 mm 10.5 in./266 mm Yes 2 Restricted USA 

Model 801 - Hinged 12 oz./340 gms Carbon Steel Nickel or Blk Oxide 2.2 in./56 mm 6.4 in./163 mm 9.1 in./231 mm 8.5 in./216 mm Yes 2 USA 

Model 850 - Hinged 12 oz./340 gms Carbon Steel EPP 2.2 in./56 mm 6.4 in./163 mm 9.1 in./231 mm 8.5 in./216 mm Yes 2 USA 

LEG IRONS 

Model 703 15 oz./425 gms Carbon Steel Nickel or EPP 2.75 in./70 mm 7.5 in./191 mm 10 in./254 mm 24.25 in./616 mm Yes 2 USA 

Model 703HS 19 oz./539 gms Carbon Steel/Aluminum Nickel 2.75 in./70 mm 7.5 in./191 mm 10 in./254 mm 24.25 in./616 mm Yes 2 Restricted USA 

Model 705 - Oversize Leg Iron 17 oz./482 gms Carbon Steel Nickel 3.25 in./82.5 mm 9.75 in./247 mm 12.25 in./311 mm 26.00 in./660 mm Yes 2 USA 

WAIST CHAINS 

Model 7002 - Cuffs at Hips 29 oz./822 gms Carbon Steel Nickel 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm N/A Yes 2 USA 

Model 7002HS - Cuffs at Hips 33 oz./935 gms Carbon Steel/Aluminum Nickel 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm N/A Yes 2 Restricted USA 

Model 7003 - Cuffs in Front 29 oz./822 gms Carbon Steel Nickel 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm N/A Yes 2 USA 

Model 7003HS - Cuffs in Front 33 oz./935 gms Carbon Steel/Aluminum Nickel 2.0 in./51 mm 5.9 in./150 mm 8.3 in./211 mm N/A Yes 2 Restricted USA 

Model 700TC32 - Transport Chain 2.2 lbs. Carbon Steel Nickel Handcuff: Handcuff: Handcuff: N/A Yes 2 USA 

1 kg 2.0 in / 51 mm 5.9 in / 150 mm 8.3 in / 211 mm 

Leg Iron: Leg Iron: Leg Iron: 

2.75 in / 70 mm 7.5 in / 191 mm 10 in / 254 mm 

End Link End Link Chain Link Max. Overall Adjusting 

Model Weight Material Finish Size Opening Size Length Clip 

ADJUSTABLE SECURITY CHAIN 

Model PSC60 

Model PSC78 

1 lb. 4 oz. Steel Nickel 3 1/2” x 3/4” x 3/16” 2 1/2” x 1/2” x 3/16” 1 1/2” x 5/8” x 3/16” 60 inches Yes 

589 gms 1.525 meters 

1 lb. 10 oz. Steel Nickel 3 1/2” x 3/4” x 3/16” 2 1/2” x 1/2” x 3/16” 1 1/2” x 5/8” x 3/16” 7860 inches Yes 

736 gms 1.98 meters


HANDCUFF CLEANING SYSTEM 

HCS 200 Dual Purpose 

Product Code: 26584 

Cleans weapons & disinfects handcuffs 

L&R’s NEW HCS-200 Dual Purpose Handgun/Handcuff Cleaning System 

gives you the opportunity to clean handguns and clean and disinfect handcuffs 

using the ultimate in ultrasonic technology. This multi-purpose setup is ready 

to use. As endorsed by Peerless Handcuff Co. 

Includes: 

• 1 HCS-200 Setup 

• 1 Pack L&R CounterZorb Ultra Absorbent Mats 

• 1 Bottle L&R Barrier Milk Ready to Use Spray 

• 1 Bottle L&R UltraDose Germicidal Hospital Grade Cleaner Concentrate 

• 1 Q90 Half basket 

• 1 Q90 Auxilary pan 

Specifications: 

• Tank Dimensions: 

(L) 11.75 in. (W) 6.0 in (H) 4.0 in. 

(29.84 cm x 15.24 cm x 10.16 cm) 

• Shipping Weight: 

26 lbs (12kg) 


Handcuff keys are of a standard design and are compatible with all standard 

series handcuffs. All keys are made of heat treated stainless steel and are 

designed to provide an indefinite period of service. Because of the high grade 

material and craftsmanship employed, it is possible and practical for us to 

offer an unlimited lifetime guarantee. 

ZT 7P 

Carbon Fiber Flat Grip Key 

ZT 10 

Round Swivel Key - Silver 

ZT 11-LG 

5” Large Grip - Swivel Key 

Black 

ZT 11X 

Round Swivel Key 

Polymer 

ZT 13-BLU 

Aluminum Pocket Key 

Blue 

ZT 13-ORN 


Orange 

ZT 9P 

Flat Knurl Swivel Key 

Polymer 

ZT 10-PNK 

Round Swivel Key - Pink 

ZT 11P 

Carbon Fiber Swivel Key 

Black 

ZT 12C 

Carbon Fiber Pocket Key 

Black 

ZT 13-GRAY 


Gray 

ZT 13-PNK 


Pink 

ZT 9P-PNK 

Flat Knurl Swivel Key 

Polymer 

ZT 11 

Round Swivel Key - Black 

ZT 11S 

Short Round Swivel Key 

Black 

ZT 13 


Silver 

ZT 13-GRN 


Green 

ZT 13-PRPL 


Purple 



ZT 13-RED 


Red 

ZT 14P 

Pocket Key - Polymer 

ZT 15P 

Extension Tool w/ Key 

Pocket 

ZT 21 

Alloy Steel Pocket Key 

Black 

ZT 57 

Combo Pocket Window 

Punch & Handcuff Key - Black 

ZT 100 

Swivel Key with USA Flag 

Black 

42 

ZT 13-YLW 


Yellow 

ZT 14XL 

5” Large Grip Aluminum 

Pocket Key - Black 

ZT 15-SW 

Extension Tool for Smith 

& Wesson issue key 

(only) - Swivel 

ZT 25 

Flat Grip Key w/ Zak 

Logo - Black 

ZT 70B 

5” Corrections Cuff Key 

DHS-KEY 

Swivel Key with Dept of 

Homeland Security Medallion. 

Limited Edition 

ZT 14 


Black 

ZT 15 

Extension Tool w/ Key 

Swivel 

ZT 17 

Concealable Belt Keeper 

Key - Removable 

ZT 50 

Standard handcuff key - 

Gold Plated (12 pack) 

ZT 99 

Survival Key Holder - 

Black 2-Pc set 

COVERT KEY 

Black, non-metallic . 

Size: 0.5” x 0.8”. 

Weight: 0.014 oz. 



Laser Engraving 

Products may be customized with Logo art 

or text – minimum order 100. 

Please inquire via fax or email for further 

information, pricing, and production details. 

ZAK Tool products are designed especially for Police and Fire agencies. Made 

in the U.S.A. of the highest quality materials, our products are built to last. 

ZT 52 

Key Ring Holder 

Fits Up To 2-1/4” Wide Belt 

Black 

ZT 55 


Fits Up To 2-1/4” Wide 

Duty Belt - Black 

ZT 54 


Fits Up To 1-1/2” Wide Belt 

Black 

ZT 55-C 

Connector Clip 

Secures two ZT55 Key Ring 

Holders - 1.5” apart 

ZT 65 

Key Ring Holder Fits Up 

To 2 1/4” Wide Duty 

Belt - Stainless finish 

(example) Connector Clip 

Shown with two ZT55 

Key Ring Holders 

Key Rings 

IN PACKS OF 25: ZT33 2” Silver 

ZT34 1.5” Silver ZT35 1.5” Black





44 

TACTICAL HELMETS 

All models have the following features: 

• Non-ballistic materials, lightweight construction for comfort 

• Expanded polystyrene liner for added protection 

• Three shell sizes: S/M - 6 1/2” -7 3/8”; L/XL - 7 1/2” - 7 3/4”; 

Jumbo - 7 7/8” - 8 1/4” 

• Choice of Sizing Strips or Combi Fit Pad System (except TR-I) 

• All models with tactical face shield include liquid seal protection 

• Available in flat black or flat navy 

• Optional accessories available 

TR2000/2001 

FG Helmet – Half Shell 

TR2200/2201 

FG Helmet – Half Shell with Brim 

• Molded fiberglass/KEVLAR ® -reinforced shell 

• New Echo ® quick-release buckle 

• High-retention strap system with soft flexible chin cup 

• Washable, removable Hydrofil® Dri-Lex ® fabric liner and 

Aero-Spacer ® insert for moisture wicking and air flow 

• Includes 3 mm polycarbonate face shield 

• Choose Sizing Strips (TR2000/TR2200) 

or Combi Fit Pads (TR2001/TR2201) 

• Available with gridded face shield 

(TR2000GRD/TR2001GRD/TR2200GRD/TR2201GRD) 

• Weight: 2.8 lbs. 

TR2200 



TR-I 

PC Helmet – Half Shell 

• Basic, value priced non ballistic model 

• Injection molded polycarbonate shell 

• Retention system with high-tensile strength steel chrome plated D-ring 

• Permanently mounted injection-molded neck protector with high-density 

foam padding for added protection 

• Combi Fit Pad System 


SWAT2000/2001 

FG Helmet - Full Shell with Brim 

• Molded fiberglass/KEVLAR ® -reinforced shell 

• Quick release buckle with high retention strap system 

with soft flexible chin cup 

• Injection-molded neck protector with high density foam padding 

for added comfort 

• Washable, removable Hydrofil ® Dri-Lex ® fabric liner and 

Aero-Spacer ® insert for moisture wicking and air flow 

• Includes 4mm polycarbonate face shield 

• Choose Sizing Strips (SWAT2000) or Combi Fit Pads (SWAT2001) 

• Available with gridded face shield (SWAT2000GRD/SWAT2001GRD) 


SWAT2000GRD


HELMETS 

The lightweight, high-performance protection of PROTECH Tactical helmets set 

the industry standard for ergonomic comfort and superb ballistic performance. 

PROTECH’s broad product range allows you to choose the helmet that is precisely 

right for your needs. 

DELTA 4 BOLTLESS 

Type IIIA 

• NIJ-0106.01 tested 

• ACH/warrior-style helmet (brimless) 

• Boltless design for uncompromised ballistic 

and impact protection 

• High-performance ballistic aramid fiber 

• Adjustable four-point retention system 

• Ventilated, adjustable mesh crown and chin strap 

• Weight (medium): 3.1 lbs. (1.4 kg) Approx. 

• Sizes: Small, Medium, Large, Extra-Large 

• Optional military padding suspension system and 

non-ballistic nape curtain available 

DELTA 4 LT 

Type IIIA 



• Ultra-light, high-tenacity 

aramid/polyethylene materials 





• Optional military padding suspension system and 

non-ballistic nape curtain available 

DELTA 4 

Type IIIA 



• High-performance ballistic aramid fiber 





• Optional military padding suspension system 

and non-ballistic nape curtain available 




46 

906FS6 W/GAS MASK FACE SHIELD 

ILK1 INTERIOR LINER KIT 

SSWK906 SCREW, SPACER 

AND WASHER KIT 

CP1 CHIN PAD 



Model 906FS6 pictured with 

PC1000 gas mask. 

906 Riot Duty Helmet 

SIRCHIE 

Our most popular tactical helmet provides outstanding protection and 

superior comfort. The model 906 features an optically clear, UV resistant, 

polycarbonate face shield with an integrally molded liquid seal. 

The model 906 is trusted by thousands of law enforcement agencies around 

the world to protect their valuable men and women in any riot situation. 

accessories 

CC1 CHIN CUP 

FS4 STANDARD FACE SHIELD 

FS6 GAS MASK FACE SHIELD 

Front view of model 906C. 

NAP1 CORDURA ® NAPE PAD / 

NAP4 NOMEX ® NAPE PAD 

CB1 J. CARRYING BAG


G2 

2035 LED 

INTRUDER G2 Type IIIA 

• NIJ-0108.01 Type IIIA protection 

• Manufactured with advanced, high-performance 

polyethylene fiber 

• Enlarged 6.75" x 15.50" (17.2 cm x 39.37 cm), triangular 

ballistic viewport with multiple-hit capabilities 

• Unique triangular ballistic viewport offers increased 

vertical and horizontal peripheral vision 

• Standoff platform and padded forearm rest to 

provide additional ballistic impact protection against 

backface deformation 

• High-intensity, strobe-capable LED dual lighting 

system with pressure switch 

• Ambidextrous horizontal handle 

• Rake Bars 

• Vacuum-formed skin for greater durability 

• 20" x 34" (50.8 cm x 86.36 cm) ballistic coverage 

• Available in the following model: 

– 2035G2 (LED lights) 21 lbs. (9.5 kg) Approx. 

2035 WL 


INTRUDER HS Type IIIA 

• NIJ-0108.01 Type IIIA protection 

• Manufactured with advanced, high-performance 

polyethylene fiber 

• Curved 4" x 17" (10.16 cm x 43.18 cm) multi-layered 

viewport for multiple-hit capabilities 

• Overlapping front and back viewport provides a 

reinforced viewport seam for optimum protection 

• 18˚ curvature design for increased peripheral vision 

• Ambidextrous horizontal handle 

• Vacuum-formed skin for greater durability 

• Rake Bars 

• High-intensity or LED light system options 

• 20" x 34" (50.8 cm x 86.36 cm) ballistic coverage 

• Available in the following models: 

– 2035 W (without lights) 16.5 lbs. (7.5 kg) Approx. 

– 2035 LED (LED lights) 20 lbs. (9.1 kg) Approx. 

– 2035 WL (HIL lights) 21 lbs. (9.5 kg) Approx. 



UCT SPECIFICATIONS 

F7007 DISTRACTION DEVICE ® 

4-Gram Training Reload 

er .78 in / 5.0 cm 

Length 2 7/8 in / .7256 cm 

Product Specifications 

r 

pe 

PRODUCT To be SPECIFICATIONS 

used with reloadable steel bodies: 

Part No: 7000 

Diameter .78 in / 5.0 cm 

Part No: 8933 

Overall Length 2 7/8 in / .7256 cm 

M201A1 

Level 

. 

Less than 175 Part dB No: at 7000 5’ (1.5m) 

Part No: 8933 

7007 

Canister To be used with reloadable steel bodies: 

PRODUCT SPECIFICATIONS 

Always Diameter at your side .78 in / 5.0 in cm the line of duty! 



Part No: 7000 

Part No: 8933 

Fuze Type M201A1 

Sound Level Less than 175 dB at 5’ (1.5m) 

Part No. 7007 

Warranty* 5 years from date of manufacture 

All Specifications are Averages and Subject to Change 

*Please See Complete Warranty Information Below 

7007 DISTRACTION DEVICE ® 


4-GRAM TRAINING RELOAD 

The 4-Gram training reload incorporates an M201A1 type fuze that was 

designed for use with the 7000 Multi-Port Plus reloadable steel body. The 

4-Gram reloads are only to be used when properly inserted and tightened into 

the Distraction Device ® body. Do not discharge the reload without the use of the 

body. The Distraction Device ® unit should only be deployed in areas that have 

been visually observed to be clear of potential hazards. The 4-Gram reload has 

a charge tube diameter of 0.78, and on overall length of 2 7/8 in. The device 

produces a medium report and flash. WARNING: 

CORRECTIONA 

SUCCESSFULL 

DEPLOYMENT 

OF THE DISTR 

OR SERIOUS 



Part No. 7007 











produces a medium report and flash. WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, 

CORRECTIONAL OR MILITARY PERSONNEL WHO HAVE 

SUCCESSFULLY COMPLETED A TRAINING PROGRAM FOR THE 

DEPLOYMENT OF DISTRACTION DEVICE ® UNITS. IMPROPER USE 

OF THE DISTRACTION DEVICE ® All Specifications are Averages and Subject to Change 


The 4-Gram training reload incorporates an M201A1 type fuze that was designed 

for use with the 7000 Multi-Port Plus reloadable steel body. The 4-Gram reloads 

are only to be used when properly inserted and tightened into the Distraction Device 

UNIT CAN RESULT IN DEATH 

OR SERIOUS BODILY INJURY. 

® body. Do not discharge the reload without the use of the body. The Distraction 

Device ® ty* 5 years from date of manufacture 

ations are Averages and Subject to Change 

e Complete Warranty Information Below 

am training reload incorporates an M201A1 type fuze that was 

for use with the 7000 Multi-Port Plus 

unit should only be deployed in areas that have been visually observed 

to be clear of potential hazards. The 4-Gram reload has a charge tube diameter of 

0.78, and on overall length of 2 7/8 in. The device produces a medium report 

and flash. 

reloadable steel body. The 

eloads are only to be used when properly inserted and tightened into 

ction Device ® body. Do not discharge the reload without the use of the 

Distraction Device ® unit should only be deployed in areas that have 

ally observed to be clear of potential hazards. The 4-Gram reload has 

tube diameter of 0.78, and on overall length of 2 7/8 in. The device 

a medium report and flash. WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, 




OF THE DISTRACTION DEVICE ® WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, CORRECTIONAL OR MILI- 

TARY PERSONNEL WHO HAVE SUCCESSFULLY COMPLETED A TRAINING PROGRAM 

FOR THE DEPLOYMENT OF DISTRACTION DEVICE 

UNIT CAN RESULT IN DEATH 


® UNITS. IMPROPER USE OF THE 

DISTRACTION DEVICE ® UNIT CAN RESULT IN DEATH OR SERIOUS BODILY INJURY. 

MUNITIONS WARRANTY 

Defense Technology ® MUNITIONS WARRANTY 

Defense Technology 

(the “Company”) warrants its munitions products to be free from defects in materials and workmanship under normal use or service for a period of five years from date of manufacture. If you 

believe this product has any defects in materials or workmanship, cease use immediately and contact customer care for a remedy. If a product proves to be defective in material or workmanship, we will repair or replace 

the product and send it to you at our expense. 

This is a LIMITED WARRANTY, and is the sole and exclusive warranty of this product by the Company. This LIMITED WARRANTY applies only where the product has been properly stored and maintained, has been used in 

® (the “Company”) warrants its munitions products to be free from de 

or service for a period of five years from date of manufacture. If you believe this product h 

immediately and contact customer care for a remedy. If a product proves to be defective in 

product and send it to you at our expense. 

This is a LIMITED WARRANTY, and is the sole and exclusive warranty of this product by 

where the product has been properly stored and maintained, has been used in accordanc 

and has not been subject to misuse or negligence. 

THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCL 

OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. 

IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR 

PROFITS, INCIDENTAL DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR EXP 

THE PRODUCT, REGARDLESS OF THE FORM OF THE ACTION, WHETHER IN TORT (INCLU 

OTHERWISE, AND REGARDLESS OF WHETHER THE COMPANY HAS BEEN ADVISED OF TH 

For any warranty issue please contact customer care for a prompt resolution to your con 

www.safari 



48 R.Nicholls • www.rnicholls.com • 450.442.9215 

® ONS WARRANTY 

Technology (the “Company”) warrants its munitions products to be free from defects in materials and workmanship under normal use 

or service for a period of five years from date of manufacture. If you believe this product has any defects in materials or workmanship, cease use 

immediately and contact customer care for a remedy. If a product proves to be defective in material or workmanship, we will repair or replace the 


This is a LIMITED WARRANTY, and is the sole and exclusive warranty of this product by the Company. This LIMITED WARRANTY applies only 

where the product has been properly stored and maintained, has been used in accordance with agency and Defense Technology’s instructions, 


THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY 


IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ANTICIPATED OR LOST 

PROFITS, INCIDENTAL DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR EXPENSES THAT ARISE FROM ANY CAUSE RELATING TO 

® accordance with agency and Defense Technology’s instructions, and has not been subject to misuse or negligence. 

THE COMPANY (the MAKES “Company”) NO OTHER WARRANTIES warrants EXPRESS, IMPLIED, its munitions OR STATUTORY; products INCLUDING WITHOUT to be LIMITATION free from ANY IMPLIED defects WARRANTY in materials OF FITNESS FOR and A PARTICULAR workmanship PURPOSE OR MERCHANTABILITY. under normal use 

e for a IN period NO EVENT SHALL of five THE COMPANY years from BE LIABLE date FOR ANY of PUNITIVE, manufacture. EXEMPLARY, OR If CONSEQUENTIAL you believe DAMAGES, this ANTICIPATED product OR has LOST any PROFITS, defects INCIDENTAL in DAMAGES, materials LOSS OF or TIME, workmanship, OR OTHER INDIRECT LOSSES cease OR use 

tely and EXPENSES contact THAT ARISE customer FROM ANY care CAUSE RELATING for a remedy. TO THE PRODUCT, If a REGARDLESS product OF proves THE FORM OF to THE be ACTION, defective WHETHER in IN material TORT (INCLUDING or workmanship, NEGLIGENCE), CONTRACT, we STRICT will LIABILITY repair OR OTHERWISE, or replace AND the 

nd send REGARDLESS it to you OF WHETHER at our THE expense. COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH CONSEQUENTIAL DAMAGES. 

LIMITED WARRANTY, and is the sole and exclusive warranty of this product by the Company. This LIMITED WARRANTY applies only 

e product has been properly stored and maintained, has been used in accordance with agency and Defense Technology’s instructions, 

not been subject to misuse or negligence. 

PANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY 

SS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.




The 15-Gram Distraction Device 

R.Nicholls • www.rnicholls.com • 450.442.9215 49 

® reload incorporates an M201A1 type fuze 

that was designed for use with the Distraction Device ® reloadable steel 

body. The 15-Gram Distraction Device ® reloads are only to be used when 

properly inserted and tightened into the Distraction Device ® body. Do not 

discharge the reload without the use of the steel body. The Distraction 

Device ® body should only be deployed in areas that have been visually 

observed to be clear of potential hazards. 


Defense Technology ® WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, 



DEPLOYMENT OF DISTRACTION DEVICE 

(the “Company”) warrants its munitions products to be free from defects in materials and workmanship under normal use or service for a period 

of five years from date of manufacture. If you believe this product has any defects in materials or workmanship, cease use immediately and contact customer care for 

a remedy. If a product proves to be defective in material or workmanship, we will repair or replace the product and send it to you at our expense. 

This is a LIMITED WARRANTY, and is the sole and exclusive warranty of this product by the Company. This LIMITED WARRANTY applies only where the product 

has been properly stored and maintained, has been used in accordance with agency and Defense Technology’s instructions, and has not been subject to misuse 

or negligence. 

THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF FITNESS 

FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. 

® UNITS. IMPROPER 

USE OF THE DISTRACTION DEVICE ® F8901 DISTRACTION DEVICE 


Reload Steel collar w/cardboard tube 



Part No.: 7000 


Overall Length 5.0 in / 12.7 cm 


Explosive Content Flash Powder 

.52 oz /15.0 gm 

Sound Level 175 dB at 5’ (1.5m) 

Light Level 6 - 8 million candelas 

Light Duration 10 milliseconds 

Part No. 8901 






The 15-Gram Distraction Device® reload incorporates an M201A1 type fuze that was designed for use with the Distraction Device® reloadable steel body. The 15-Gram 

Distraction Device® reloads are only to be used when properly inserted and tightened into the Distraction Device® body. Do not discharge the reload without the use of 

the steel body. The Distraction Device® body should only be deployed in areas that have been visually observed to be clear of potential hazards. 

UNIT CAN RESULT IN 

DEATH OR SERIOUS BODILY INJURY. 

® 

15-Gram Reload 

WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, CORRECTIONAL OR MILI- 


FOR THE DEPLOYMENT OF DISTRACTION DEVICE® UNITS. IMPROPER USE OF THE 

DISTRACTION DEVICE® UNIT CAN RESULT IN DEATH OR SERIOUS BODILY INJURY. 


Defense Technology ® Warranty* 5 years from date 

All Specifications are Averages and Subject to Chan 


The 4-Gram training reload incorporates an 

designed for use with the 7000 Multi-Port Pl 

4-Gram reloads are only to be used when pro 

the Distraction Device 





accordance with agency and Defense Technology’s instructions, and has not been subject to misuse or negligence. 

THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. 

IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ANTICIPATED OR LOST PROFITS, INCIDENTAL DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR 

EXPENSES THAT ARISE FROM ANY CAUSE RELATING TO THE PRODUCT, REGARDLESS OF THE FORM OF THE ACTION, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, STRICT LIABILITY OR OTHERWISE, AND 

REGARDLESS OF WHETHER THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH CONSEQUENTIAL DAMAGES. 

® body. Do not discharge 

body. The Distraction Device ® unit should only 

been visually observed to be clear of potential 

a charge tube diameter of 0.78, and on overa 

produces a medium report and flash. 


Defense Technology ® Canister To be used with reloadable steel bodies: 

Part No: 7000 

Part No: 8933 



Part No. 7007 





designed for use with the 7000 Multi-Port Plus 

(the “Company”) wa 

or service for a period of five years from d 

immediately and contact customer care for 


This is a LIMITED WARRANTY, and is the 

where the product has been properly stor 

and has not been subject to misuse or ne 

THE COMPANY MAKES NO OTHER WARRA 

OF FITNESS FOR A PARTICULAR PURPOSE 

IN NO EVENT SHALL THE COMPANY BE 

PROFITS, INCIDENTAL DAMAGES, LOSS O 

THE PRODUCT, REGARDLESS OF THE FOR 

OTHERWISE, AND REGARDLESS OF WHET 

For any warranty issue please contact cu 

reloadable steel body. The 






produces a medium report and flash. W 


CO 

SU 

DE 

OF 

OR 

Defense Technology ® (the “Company”) warrants its munitions products to be fre 

or service for a period of five years from date of manufacture. If you believe this 

immediately and contact customer care for a remedy. If a product proves to be d 


This is a LIMITED WARRANTY, and is the sole and exclusive warranty of this p 

where the product has been properly stored and maintained, has been used in 


THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUT 


IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMP 

PROFITS, INCIDENTAL DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSE 

THE PRODUCT, REGARDLESS OF THE FORM OF THE ACTION, WHETHER IN TO 

OTHERWISE, AND REGARDLESS OF WHETHER THE COMPANY HAS BEEN ADVIS 

For any warranty issue please contact customer care for a prompt resolution to 

The 15-Gram Distraction Device 

w 

® reload incorporates an M201A1 type fuze 

that was designed for use with the Distraction Device ® reloadable steel 

body. The 15-Gram Distraction Device ® reloads are only to be used when 

properly inserted and tightened into the Distraction Device ® body. Do not 

discharge the reload without the use of the steel body. The Distraction 

Device ® body should only be deployed in areas that have been visually 

observed to be clear of potential hazards. 


Defense Technology ® WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, 



DEPLOYMENT OF DISTRACTION DEVICE 









IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ANTICIPATED OR LOST PROFITS, INCIDENTAL 

DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR EXPENSES THAT ARISE FROM ANY CAUSE RELATING TO THE PRODUCT, REGARDLESS OF THE FORM 

OF THE ACTION, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, STRICT LIABILITY OR OTHERWISE, AND REGARDLESS OF WHETHER THE COMPANY 

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH CONSEQUENTIAL DAMAGES. 

For any warranty issue please contact customer care for a prompt resolution to your concern at the number provided below. 

® UNITS. IMPROPER 

USE OF THE DISTRACTION DEVICE ® PRODUCT SPECIFICATIONS 








Explosive Content Flash Powder 

.52 oz /15.0 gm 

Sound Level 175 dB at 5’ (1.5m) 



Part No. 

Warranty* 

8901 

5 years from date of manufacture 



UNIT CAN RESULT IN 

DEATH OR SERIOUS BODILY INJURY. 

800.347.1200 


15-GRAM RELOAD 


15-GRAM RELOAD


F8901SC DISTRACTION DEVICE ® 

15-Gram Reload W/Safety Clip 



RODUCT SPECIFICATIONS 





Part No: 7000 

Part No: 8933 

Fuze Type 

Sound Level 

Light Level 

M201A1 

Part No: 7000 

175 dB at 5’ (1.5m) 

Part No: 8933 

6 - 8 million candelas 







Always Diameter at your side .78 in / 5.0 in cm the line of duty! 



Part No: 7000 

Part No: 8933 



Part No. 7007 




8901SC DISTRACTION DEVICE ® 








produces a medium report and flash. WARNING: 

CORRECTIONA 

SUCCESSFULL 

DEPLOYMENT 

OF THE DISTR 

OR SERIOUS 



The 15-Gram Reload w/Safety Clip incorporates an M201A1 type fuze that was 

designed for use with the 8933 Low Roll and 7000 Multi-Port Plus reloadable 

steel body. The safety clip is designed to keep the pull-pin against the device body 

to prevent the pin from protruding and possibly snagging on other objects. The 15- 

Gram Reload w/Safety Clip is only to be used when properly inserted and tightened 

into the Distraction Device ® body. Do not discharge the reload without the use of 

the steel body. The Distraction Device ® WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, CORRECTIONAL OR MILI- 


FOR THE DEPLOYMENT OF DISTRACTION DEVICE 

unit should only be deployed in areas that 

have been visually observed to be clear of potential hazards. 

® UNITS. IMPROPER USE OF THE 

DISTRACTION DEVICE ® UNIT CAN RESULT IN DEATH OR SERIOUS BODILY INJURY. 


Defense Technology ® MUNITIONS WARRANTY 






accordance with agency and Defense Technology’s instructions, and has not been subject to misuse or negligence. 

THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. 

IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ANTICIPATED OR LOST PROFITS, INCIDENTAL DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR 

EXPENSES THAT ARISE FROM ANY CAUSE RELATING TO THE PRODUCT, REGARDLESS OF THE FORM OF THE ACTION, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, STRICT LIABILITY OR OTHERWISE, AND 

REGARDLESS OF WHETHER THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH CONSEQUENTIAL DAMAGES. 

® Light Duration 10 milliseconds 

Part No. 8901SC 

(the “Company”) warrants its munitions products to be free from de 

or service for a period of five years from date of manufacture. If you believe this product h 


immediately and contact customer care for a remedy. If a product proves to be defective in 




This is a LIMITED WARRANTY, and is the sole and exclusive warranty of this product by 

where the product has been properly stored and maintained, has been used in accordanc 

The 15-Gram Reload w/Safety Clip incorporates an M201A1 type fuze that was 


designed for use with the 8933 Low Roll THE COMPANY MAKES NO OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY; INCL 


IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR 

PROFITS, INCIDENTAL DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR EXP 

THE PRODUCT, REGARDLESS OF THE FORM OF THE ACTION, WHETHER IN TORT (INCLU 

OTHERWISE, AND REGARDLESS OF WHETHER THE COMPANY HAS BEEN ADVISED OF TH 

For any warranty issue please contact customer care for a prompt resolution to your con 

www.safari 

and 7000 Multi-Port Plus reloadable 

steel body. The safety clip is designed to keep the pull-pin against the device 

body to prevent the pin from protruding and possibly snagging on other objects. 

The 15-Gram Reload w/Safety Clip is only to be used when properly inserted and 

tightened into the Distraction Device ® body. Do not discharge the reload without 

the use of the steel body. The Distraction Device ® unit should only be deployed in 

areas that have been visually observed to be clear of potential hazards. WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, 




OF THE DISTRACTION DEVICE ® UNIT CAN RESULT IN DEATH 



Defense Technology ® Sound Level 175 dB at 5’ (1.5m) 



Part No. 8901SC 


ll Specifications are Averages and Subject to Change 

Please See Complete Warranty Information Below 

he 15-Gram Reload w/Safety Clip incorporates an M201A1 type fuze that was 

esigned for use with the 8933 Low Roll 









IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ANTICIPATED OR LOST PROFITS, INCIDENTAL 

DAMAGES, LOSS OF TIME, OR OTHER INDIRECT LOSSES OR EXPENSES THAT ARISE FROM ANY CAUSE RELATING TO THE PRODUCT, REGARDLESS OF THE FORM 

OF THE ACTION, WHETHER IN TORT (INCLUDING NEGLIGENCE), CONTRACT, STRICT LIABILITY OR OTHERWISE, AND REGARDLESS OF WHETHER THE COMPANY 

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH CONSEQUENTIAL DAMAGES. 

For any warranty issue please contact customer care for a prompt resolution to your concern at the number provided below. 

and 7000 Multi-Port Plus reloadable 

teel body. The safety clip is designed to keep the pull-pin against the device 

ody to prevent the pin from protruding and possibly snagging on other objects. 

he 15-Gram Reload w/Safety Clip is only to be used when properly inserted and 

ghtened into the Distraction Device ® body. Do not discharge the reload without 

e use of the steel body. The Distraction Device ® unit should only be deployed in 

reas that have been visually observed to be clear of potential hazards. WARNING: TO BE USED BY TRAINED LAW ENFORCEMENT, 




OF THE DISTRACTION DEVICE ® UNIT CAN RESULT IN DEATH 


UNITIONS WARRANTY 

efense Technology ® (the “Company”) warrants its munitions products to be free from defects in materials and workmanship under normal use or service for a p 

f five years from date of manufacture. If you believe this product has any defects in materials or workmanship, cease use immediately and contact customer ca 

remedy. If a product proves to be defective in material or workmanship, we will repair or replace the product and send it to you at our expense. 

his is a LIMITED 50 WARRANTY, R.Nicholls and is the • sole www.rnicholls.com and exclusive warranty • of 450.442.9215 

this product by the Company. This LIMITED WARRANTY applies only where the pro 

as been properly stored and maintained, has been used in accordance with agency and Defense Technology’s instructions, and has not been subject to mi 

r negligence. 

800.347.1200 

15-GRAM RELOAD W/SAFETY CLIP 

®


SPECIALTY 

IMPACT 

Whether it’s additional crowd routing requirements or 

targeting instigators, these munitions are designed for 

a range of effects from pain compliance to delivering 

maximum energy for incapacitation or disorientation of 

aggressive subjects. In both 12-gauge and large bore 

options, specialty impact munitions offer an effective and 

dynamic solution. 

8 safariland.com/lesslethal • defense-technology.com 

DIRECT IMPACT ® Inert, OC, Marking, CS and LE 

EXACT IMPACT 


40mm Sponge Round 

The 40mm Sponge Round has been rigorously tested to ensure 

that its impact, energy and accuracy remain consistent and 

accurate through engagement distances from five to 100 or more 

feet. It gives you a single choice of munition, so when it’s time to 

make critical decisions, you don’t have to spend time deciding 

between short- or long-range munitions. Plus, smokeless powder 

gives you consistent velocities and unobscured vision. 

40MM SPONGE ROUND PART NO F6325 

The 40mm Direct Impact incorporates maximum deliverable energy and extreme 

accuracy in a “point of aim, point of impact” round. The crushable foam nose 

provides sufficient pain stimulus through blunt trauma with the added feature of 

an irritant powder to maximize the potential for incapacitation without serious 

injury. A smokeless powder propellant ensures unobscured visibility and more 

consistent velocities with the Direct Impact round. 

The Defense Technology brand has once again responded to the needs of our 

professionals, with the release of their new Extended Range 40mm munitions 

series for law enforcement. Offering the same payload as their acclaimed Direct 

Impact series, only with the ability to go further. 

1 40MM INERT PART NO F6323 

2 40MM OC 

PART NO F6320 

3 40MM MARKING PART NO F6326 

4 40MM CS 

PART NO F6322 

EXTENDED RANGE ROUNDS (NEW) 

5 40MM OC LE PART NO F6420 

• 40MM CS LE PART NO F6422 

• 40MM INERT LE PART NO F6423 

• 40MM MARKING LE PART NO F6426 

40mm Marking Round 

1 2 3 4 

5 

40MM RELOADABLE Training Round 

The eXact iMpact 40MM Reloadable Training Round 

was the first to produce a highly accurate 40MM less 

lethal impact round. Introducing our newly revised 

reloadable training round. This is the perfect munition to 

use for certification, function drills, and to teach distance 

management. Offered in a 250 shot kit, these reloadable 

shells will help you train your officers at a fraction of the 

cost of live ammunition. 

40MM RELOADABLE PART NO F6530 



52 

STINGER ® 

1 

3 4 5 

Rubber Ball Grenade 

To psychologically and physiologically maximize less lethal force against the 

most stubborn of crowds, the Stinger ® rubber ball grenade offers the multiple 

stimulus of light, sound, rubber pellets and optional CS or OC chemical agents. 

1 RUBBER PELLET ONLY PART NO F1090 

2 CS 

PART NO F1088 

3 OC 

PART NO F1089 

HAN-BALL 

Pyrotechnic Outdoor Chemical Grenades 

The Han-Ball grenade is a fast burning, high volume continuous 

discharge grenade available in CN, CS, and Saf-Smoke . The outdoor 

use grenade expels its payload in approximately 15-20 seconds. 

1 CS 

PART NO F1092 

2 CN 

PART NO F1091 

3 SAF-SMOKE PART NO F1093 

1 2 


2 


12-GAUGE DRAG STAbILIZED 

bean-bag Round 

The revolutionary 12-gauge Drag Stabilized Bean-Bag Round is the most accurate 

12-gauge specialty impact round available today, up to sixty feet and beyond. This 

pinpoint accuracy is made possible by the round’s tear shape and unique multi-tail 

design. It’s built so strong, it reduces fabric rupture either in the air or on impact. Their 

marking round will leave a visible UV indicator which will last several days. 

1 DRAG STABILIZED ROUND PART NO F3027 

2 DRAG STABILIZED MARKING ROUND PART NO F3028 

12-GAUGE ROUNDS 

These 12-gauge rounds were specifically developed for routing, 

protecting chemical devices or targeting instigators. 

3 FIN STABILIZED ROUND 

PART NO F3021 

® 4 32CAL. STINGER RUBBER BALLS PART NO F3016 

® 5 32CAL. STINGER RUbb ER b ALLS HIGH VELOCITy PART NO F3020 

1 2 3 

RUBBER BALL BLAST Grenade 

While the Stinger ® Rubber Ball Grenade is a combination specialty-impact munition and 

diversion device, the Rubber Ball Blast Grenade is a combination irritant and diversion device. 

Designed for maximum effect, it delivers up to three stimuli for psychological and physiological 

effect: light, sound and chemical agent or OC. 

1 CS BLAST PART NO F1097 

2 OC BLAST PART NO F1095 

3 CN BLAST PART NO F1096 (NOT SHOWN) 

4 PRACTICE PART NO F1098 (NOT SHOWN) 

1 2 3 

800.347.1200 

9


SPECIALTY 

IMPACT 


1 

MULTIPLE FOAM BATON 


The 37MM Foam Baton round is most widely used as a pain 

compliance option by law enforcement and corrections where 

stand-off distances are limited. It has proven successful in 

numerous instances as a dynamic energy single subject round 

for incapacitation at close ranges. 

1 37MM PART NO F1178 

2 37/40MM PART NO F6299 


2 

37/40MM ROUNDS 

Through a unique design feature, they offer 4 rounds which will fit either a 

37 or 40MM launcher. This is most advantageous with regional response 

teams where equipment which has been purchased over the years by 

different departments, and will be brought to one event. Being able to 

utilize both platforms currently owned, saves money in upgrading to a new 

weapons platform. 

® 1 32 CAL. STINGER RUBBER BALLS PART NO F6296 


3 MULTIPLE WOOD BATON 

PART NO F6298 

4 BEAN BAG 

PART NO F6225 

1 2 3 4 


3


SPECIALTY 

IMPACT 

54 

1 

2 3 4 


1 


37MM ROUNDS 

40MM ROUNDS 37/40MM ROUNDS 

MULTIPLE FOAM BATON 

Their family of 37MM offers various configurations to address the 

diverse threats and environments which law enforcement and 

corrections will encounter. From low trajectory area dispersal 

to targeting 

The 37MM 

a single 

Foam 

subject, 

Baton 

their 

round 

37MM 

is most 

rounds 

widely 

are 

used 

ready 

as 

for 

a 

the 

pain 

compliance option by law enforcement and corrections where 

threats you face. 

stand-off distances are limited. It has proven successful in 

numerous instances as a dynamic energy single subject round 

® 1 32 for CAL. incapacitation STINGER RUBBER at close BALLS ranges. PART NO F1196 



PART NO F1176 


4 MULTIPLE RUBBER BATON 

PART NO F1177 

2 37/40MM PART NO F6299 

5 BEAN BAG 

PART NO F1225 


5 

2 

The adoption of the Through 40MM a systems unique design as a less feature, lethal they delivery offer 4 platform rounds which offers will many fit either advantages a 

over other systems. 37 or The 40MM smokeless launcher. powder This is and most rifled advantageous barrel produce with regional higher velocities response and 

greater accuracy, teams while launching where equipment a larger payload which has with been less purchased smoke emitted over from the years the barrel. by 

different departments, and will be brought to one event. Being able to 

® utilize both platforms currently owned, saves money in upgrading to a new 

1 32 CAL. STINGER RUBBER BALLS PART NO F6096 

® 2 60 CAL. STINGER RUBBER weapons BALLS platform. PART NO F6097 


PART NO F6098 

4 MULTIPLE RUBBER BATON 

® 1 32 CAL. STINGERPART 

RUBBER NO F6064 BALLS PART NO F6296 

5 BEAN BAG 

® 2 60 CAL. STINGERPART 

RUBBER NO F6025 BALLS PART NO F6297 


PART NO F6298 

4 BEAN BAG 

PART NO F6225 

1 2 3 4 

1 2 3 4 5 


3 

800.347.1200 

11


CHEMICAL 

When crowd resistance elevates, our chemical grenades 

and projectiles offer solutions for both indoor and outdoor 

situations. Alternatives such as OC, CN, CS, and Smoke 

provide coverage in pyrotechnic and non-burning carriers. 

These grenades and munitions offer the maximum force 

option in the management of crowds and the control of civil 

and correctional disorder. 


TRIPLE-CHASER ® 


The Triple-Chaser ® is a fast burning pyrotechnic grenade designed for crowd management. 

It consists of three separate canisters pressed together with separating charges between 

each. When deployed, the canisters separate and land approximately 20 feet apart allowing 

increased area coverage in a short period of time. OUTDOOR ONLY. 

1 CS 

PART NO F1026 

2 CN 

PART NO F1025 


1 2 3 

1 2 3 

37MM SKAT-SHELL ® 

The Skat-Shell ® is widely used as a crowd 

management tool for the rapid and broad deployment 

of chemical agents by a single grenadier. The 

Skat-Shell ® contains separate sub-munitions that 

function individually once the round is discharged. 

The scattering effect and the rapid burning of the 

sub-munitions provide a wide area of coverage, 

minimizing the potential of being thrown back. 

OUTDOOR ONLY. 

1 CS 

PART NO F1172 

2 CN 

PART NO F1171 




56 

1 

1 

2 3 

2 

1 2 3 4 


3 


4 

PYROTECHNIC 

OUTDOOR CHEMICAL 

DEVICES 

Designated for outdoor use, as in crowd 

control situations, their collection of 

pyrotechnics devices, deliver an extended 

and consistent burn time while producing 

large plums of agent. Their proven designs 

have been a leading force within crowd 

control for years. 

1 CS TRIPLE CHASER PART NO F1026 

2 CS RIOT CONTROL PART NO F1082 

3 CN SPEDE-HEAT 

PART NO F1071 

4 CS POCKET TACTICAL PART NO F1016 

NON-Py ROTECHNIC CHEMICAL DEVICES 

Their non-pyrotechnic devices safely deliver chemical agents into environments 

where the risk of fire is a concern. The diversity of their products is reflected in the 

wide variances of distances to which your target can be safely engaged. 

1 OC INSTANTANEOUS BLAST POWDER GRENADE PART NO F1040 

2 37MM CN MUZZLE BLAST POWDER 

PART NO F1141 

3 40MM CN MUZZLE BLAST POWDER 

PART NO F6041 

PYROTECHNIC 

OUTDOOR WHITE & 

COLORED SMOKE 

GRENADES 

Both their (HC) and Saf-Smoke grenades 

produce full white or colored clouds with 

burn times which match their chemical 

agent grenades. This allows for clocking 

the delivery of chemical agents and 

masking movement. 

1 MILITARY STYLE GREEN SMOKE PART NO F1065 

2 MILITARY STYLE RED SMOKE PART NO F1067 

3 HC-S LARGE MAx SMOKE PART NO F1073 

4 HC MILITARY STYLE MAX SMOKE PART NO F1083 

800.347.1200 

13


TACTICAL 


MINI BANG Distraction Device ® 

Ergonomically designed to fit in your hand, the Mini Bang 

packs all the power of our Multi-Port Distraction Device. 

Boasting an amazing 175(+) dbs, and 8 million Candelas, 

this all steel body is designed to reduce rolling, fit in tactical 

pockets easily and deliver the hyper stimulation you need 

when you need it. This non-reloadable device is ready when 

you are. 

MINI BANG PART NO F8922 

FUEL AIR Distraction Device ® 


A revolutionary advancement in the safe deployment of a Light/ 

Sound Device. With the combustion taking place outside of 

the canister body, over 169(+) dbs of ear piercing sound and 

8 million of Candelas over load your senses. Offered in a non 

and reloadable configuration, their Fuel Air Distraction Device is 

the perfect tool for first responders and operators working in 

buildings, trains, buses, schools, or malls. 

FUEL AIR PART NO F8001 

PART NO F8001NR 

LOW ROLL Distraction Device ® 

Completing the family of state of the art designs, 

their Low Roll body continues the ergonomic 

features which complement its powerful output 

of light and sound. Rated at 175(+) dbs and 8 

million Candelas. Available in non-reloadable and 

reloadable devices, the distinctive shape and 

capabilities will continue their legacy of delivering 

dynamic tools for dynamic entries. 

LOW ROLL PART NO F8933 



LAUNCHERS/ 

SCOPES 

Renowned for its smooth single action and reliability, the 

Defense Technology launchers are a recognized platform 

in the less lethal arena. Whether for crowd management, 

tactical deployment, or first responders, this family of 

launchers provides accuracy, quality and value. 


58 



40MM LAUNCHER 

The 40MM single- or double-action launcher can fire all Defense Technology brand 40MM 

rounds. With a one-piece steel frame, it incorporates an aluminum rifled barrel that comes 

equipped with a weaver scope-mounting rail and a removable post sight. A padded nylon 

sling is included. 

40MM LAUNCHER PART NO F1325 

37MM FULL STOCK Gas Gun 

The full stock gas gun can fire all Defense Technology brand rounds and is capable of 

launching select grenades. Advantages include fixed front sight and rear leaf sight with 50 

yard, 75 yard, and 100 yard increments, lighter weight and stronger stock and grip. 

37MM LAUNCHER PART NO F1315 

37MM FOLDING STOCK Multi-Shot Launcher 

Based upon the #1319 gun, the #1322 is fitted with a flip over folding stock which reduces 

the overall length to 20.55 inches. Still weighing 9 lbs., this compact package will offer 

improved portability and storage options. This smooth bore launcher will afford rapid 

application of up to six, 8” 37MM rounds in under 3 seconds. 

37MM FOLDING STOCK MULTI-SHOT LAUNCHER PART NO F1322


Launching Cartridge to be used with 37mm 

gas weapons. 

LAUNCHING 37MM CARTRIDGE Launching Cartridge 

PART NO F1270 


gas weapons. 

LAUNCHING CARTRIDGE PART NO F1270 

1 2 3 

1 2 


37MM Launching Cartridge 

1 2 3 

1 2 

37MM Launching Cartridge 


gas weapons. 

1 2 3 

1 2 


Launching Cartridge to be used for 

12-gauge weapons. 

LAUNCHING 12-GAUGE CARTRIDGE Launching PART NO Cartridge F1210 




12-GAUGE LAUNCHER CUP 

1 CANISTER GRENADE 

PART NO F1350 

Used in conjunction with the launching cartridge, this accessory 

2 HAN-b ALL GRENADE 

PART NO F1380 

3 will POCKET propel TACTICAL our grenades GRENADE to stand PART off targets. NO F1370It 

also can be used 

a standoff brace of the TKO rounds while breaching doors. 


PART NO F1350 


PART NO F1380 

3 POCKET TACTICAL GRENADE PART NO F1370 

37MM LAUNCHER CUP 


12-GAUGE Launching Cartridge 



PART NO F1350 


PART NO F1380 

3 Used POCKET in conjunction TACTICAL GRENADE with the launching PART NO cartridge, F1370 this accessory 

will propel our grenades to stand off targets. It also can be used 



12-GAUGE Launching Cartridge 




Used in conjunction with the launching cartridge, this accessory 

will propel our grenades to stand off targets. It also can be used 



This attachment adds another level of options to the grenadier. 

Being able to deploy grenades further away enhances safety 

and diversity of responses the team commander can call upon. 

® 1 TRIPLE CHASER GRENADE (ONLY) PART NO F1365 


PART NO F1390 

This attachment adds another level of options to the grenadier. 



® 1 TRIPLE CHASER GRENADE (ONLY) PART NO F1365 

2 This CANISTER attachment GRENADE adds another level PART of options NO F1390 to the grenadier. 




1 ® TRIPLE CHASER GRENADE (ONLY) PART NO F1365 


PART NO F1390


60 

AEROSOLS 

First Defense ® is the world’s most widely used pepper spray in law 

enforcement and corrections. In recognizing the diverse environments 

and challenges our public safety professionals face each day, the 

comprehensive First Defense line utilizes a color code system to identify 

the intensity of that product. 

ELECTRICAL DISCHARGE WEAPON (EDW) AND OC 

With the growing use of EDW’s in the law enforcement community, many officers 

are concerned about how their OC aerosol spray will react if an EDW is deployed. 

The First Defense family of OC aerosol sprays are EDW safe. 

FIRST DEFENSE ® 

MK-2 

• Allows upgrading to a higher quality OC product, 

without the expense of buying new sized 

carriers 

• Various delivery options of stream, cone and 

foam offered in this classic canister size 

• Available in all intensities of OC formulas 

F56125 MK-2 Stream .2% 

F56325 MK-2 Stream .4% 

F56725 MK-2 Stream .7% 

F56324 MK-2 Cone .4% 

F56724 MK-2 Cone .7% 

F56825 MK-2 Stream 1.3% 

F56824 MK-2 Cone 1.3% 

F56822 MK-2 Foam 1.3% 

F56025 MK-2 OC/CS* 

* Non EDW Safe 

FIRST DEFENSE ® 

360° 

• The First Defense ® 360° design allows 

deployment of OC formulas from any angle 

• The unique system ensures all of the OC is 

delivered on target 

• Accurate delivery formula in a stream 

pattern under adverse conditions 

F5439 MK-3 Stream/360° .2% 

F5449 MK-4 Stream/360° .2% 

F5239A MK-3 Stream/360° .4% 

F5249A MK-4 Stream/360° .4% 

F56733 MK-3 Stream/360° .7% 

F56343 MK-4 Stream/360° .7% 

F56833 MK-3 Stream/360° 1.3% 

F56843 MK-4 Stream/360° 1.3% 

CLASSIC PATROL Size MK-2, 3, 4 

• Proven actuator / safety 

• Options in formula and delivery system 

• Designed to work with multiple carrier sizes 

F56125 MK-2 Stream .2% F56334 MK-3 Cone .4% 





F5249 MK-4 Stream .4% F56824 MK-2 Cone 1.3% 



F4005 MK-4 Stream .7% F56825 MK-2 Stream 1.3% 

F56324 MK-2 Cone .4% F43345 MK-3 Stream 1.3% 



STREAM AEROSOL 

SIZE SPECS 

MK-2: 7-10 Short bursts 10-12 ft. 






MK-46: 26 Short bursts 23-30 ft. 

PERSONAL DEFENSE 

MK-6, 8 

• Built for those times when a lower profile is 

required 

• Molded belt clip for carry during non-uniformed 

activities 

• Same intense formula options in a compact size 

Provides an effective civilian carry option 

F5069 MK-6 Stream .2% 



F56185 MK-8 Stream .2% 

F56785 MK-8 Stream .7% 

F43665 MK-6 Stream 1.3% 

F56764 MK-6 Cone .7% 

F56884 MK-8 Cone 1.3% 

F56784 MK-8 Cone .7% 

F56864 MK-6 Cone 1.3% 

F43445 

F56822 

F56332 

F56342 

F56832 

F56025 

F56035 

F56045 

MK-4 Stream 1.3% 

MK-2 Foam 1.3% 

MK-3 Foam .4% 

MK-4 Foam .4% 

MK-4 Foam 1.3% 

MK-2 OC/CS* 

MK-3 OC/CS* 

MK-4 OC/CS* 

* Non EDW Safe


OC AEROSOL 

GRENADE FOGGER 

• One ounce canister will fully discharge under 

15 seconds 

• Six ounce canister will fully discharge under 

25 seconds 

• Delivers intense irritant in an area fogger 

F56814 Aerosol Grenade 1.3%, 1 oz. 

F56854 Aerosol Grenade 1.3%, 6 oz. 

GRENADE 

INERT Training Unit 

• Duplicates the delivery system of 

live products 

• Provides safe application on targets 

during training 

• Key tool for the development of 

deployment and decision making 

skills 

F5129 MK-2 Stream 

F5146 MK-4 Foam* 

F5125 MK-2 Cone 





F5199F MK-9 Cone 

F5439I MK-3 Stream/360° F5196 MK-9 Foam* 


F5546I MK-46 Stream 


F49950 MK-9 Cone w/Wand Adapter 


F56544I Aerosol Grenade 1 oz. 

F5449I MK-4 Stream/360° F56594I Aerosol Grenade 6 oz. 




CROWD MANAGEMENT MK-9, 46H, 46V, 46R 

• Proven actuator / safety 

• Options in formula and delivery system 

• Extended stand-off from threats 


F5746 MK-46V Stream .2% 

F5846L MK-46H Stream .2% 

F5546 MK-46R Stream .2% 


F56346V MK-46V Stream .4% 

F56346H MK-46H Stream .4% 

F56346R MK-46R Stream .4% 

F56795 MK-9 Stream .7% 

F56392 MK-9 Foam .4% 

F9005 MK-9 Cone .7% 

F56746V MK-46V Stream .7% 

F56746H MK-46H Stream .7% 

F56746R MK-46R Stream .7% 

F56895 MK-9 Stream 1.3% 

F43953 MK-9 Cone 1.3% 

F43046 MK-46V Stream 1.3% 

F56846H MK-46H Stream 1.3% 

F43046R MK-46R Stream 1.3% 

F56792 MK-9 Foam 1.3% 

F56095 MK-9 Stream OC/CS 

F56046V MK-46V Stream OC/CS* 

F56046H MK-46H Stream OC/CS* 

F56046R MK-46R Stream OC/CS* 

F43950 MK-9 cone 1.3% w/Wand 

Adapter 

F43950W MK-9 Hose & Wand 




62 

AEROSOL ORDER INFORMATION 

ALL ENVIRONMENTS, ALL ENVIRONMENTS, 

ACCURATE, ACCURATE, TARGETS 

TARGETS EyES EyES, INVERTED 



MOST ENVIRONMENTS, ALL ENVIRONMENTS, 

AREA, RESPIRATORy / EyES ACCURATE, TARGETS EyES 

FORMULATION SIZE STREAM STREAM / 360° CONE FOAM FORMULATION SIZE STRE 

.2% MK-2 F56125 — — — .2% MK-2 F56 

.2% MK-3 F5039 — — — .2% MK-3 F5 

.2% MK-4 F5049 F5449 — — .2% MK-4 F5 

.2% MK-6 F5069 — — — .2% MK-6 F5 

.2% MK-9 F5099 — — — .2% MK-9 F5 

.2% MK-46 F5746 — — — .2% MK-46 F5 

.2% MK-46 F5846L — — — .2% MK-46 F58 

.2% MK-46 F5546 — — — .2% MK-46 F5 

.4% MK-2 F56325 — — — .4% MK-2 F56 

.4% MK-3 F5239 F5239A — — .4% MK-3 F5 

.4% MK-4 F5249 F5249A — — .4% MK-4 F5 

.4% MK-6 F5269 — — — .4% MK-6 F5 

.4% MK-9 F5299 — — — .4% MK-9 F5 

.4% MK-46 F56346V — — — .4% MK-46 F563 

.4% MK-46 F56346H — — — .4% MK-46 F563 

.4% MK-46 F56346R — — — .4% MK-46 F563 

.7% MK-2 F56725 — F56724 — .7% MK-2 F56 

.7% MK-3 F3005 — F3035 — .7% MK-3 F3 

.7% MK-4 F4005 — F4035 — .7% MK-4 F4 

.7% MK-6 F6005 — F56764 — .7% MK-6 F6 

.7% MK-8 F56785 — F56784 — .7% MK-8 F56 

.7% MK-9 F56795 — F9005 — .7% MK-9 F56 

.7% MK-46 F56746V — — — .7% MK-46 F567 

.7% MK-46 F56746H — — — .7% MK-46 F567 

.7% MK-46 F56746R — — — .7% MK-46 F567 

1.3% MK-2 F56825 — F56824 — 1.3% MK-2 F56 

1.3% MK-3 F43345 — F43344 — 1.3% MK-3 F43 

1.3% MK-4 F43445 — F43444 — 1.3% MK-4 F43 

1.3% MK-6 F43665 — F56864 — 1.3% MK-6 F43 

1.3% MK-9 F56895 — F43953 — 1.3% MK-9 F56 

1.3% MK-46 F43046 — — — 1.3% MK-46 F43 

1.3% MK-46 F56846H — — — 1.3% MK-46 F568 

1.3% MK-46 F43046R — — — 1.3% MK-46 F430 

NON EDW MK-2 — — — F56822 NON EDW MK-2 — 





OC / CS MK-2 F56025 — — — OC / CS MK-2 F56 




OC / CS MK-46 F56046V — — — OC / CS MK-46 F560 

OC / CS MK-46 F56046H — — — OC / CS MK-46 F560 

OC / CS MK-46 F56046R — — — OC / CS MK-46 F560 

INERT MK-2 F5129 — F5125 F5126 INERT MK-2 F5 

INERT MK-3 F5139 F5439I 

INERT MK-4 F5149 F5449I 

F5139F F5136 INERT MK-3 F5 

F5149F F5146 INERT MK-4 F5 

INERT MK-6 F5169 — — — INERT MK-6 F5 

INERT MK-9 F5199 — F5199F F5196 INERT MK-9 F5 

INERT MK-9 — — F49950 — INERT MK-9 — 

FORCE ARRAY 

AEROSOL ORDER INFORMATION 

There was a time when officers carried only a baton, a gun and maybe a can of Mace ® . But the options today 

are much wider and more complex. To put them in perspective, Defense Technology has created a circular 

ALL ENVIRO 

ACCU 

TARGET 

FORCE 

There was a t 

are much wid


ORDER INFORMATION CHART 

PART NO Description Force Range 

Array (Meters) 

SPECIALTY IMPACT MUNITIONS 

37MM BLACK POWDER ROUNDS 

F1197 

F1199 

F1176 

F1178 

F1177 

F1225 

Stinger ® 32 Cal. Rubber Balls HPT 3-10M 

Stinger ® 60 Cal. Rubber Balls HPT 3-10M 

Multiple Wood Baton Round - 5 INT 10-45M 

Multiple Foam Baton Round - 5 HPT 1.5-10.5M 

Multiple Rubber Baton Round - 5 INT 10-30M 

Bean Bag Round INT 3.5-12M 

37/40MM SMOKELESS POWDER 

F6296 

F6297 

F6298 

F6299 

F6225 

Stinger ® 32 Cal. Stinger Rubber Balls HPT 3-10M 

Stinger ® 60 Cal. Stinger Rubber Balls HPT 5-16M 

Multiple Wood Baton Round - 3 INT 10-45M 

Multiple Foam Baton Round - 3 HPT 1.5-10.5M 


40MM SMOKELESS POWDER 

F6064 Multiple Rubber Baton INT 10-30M 

F6096 

F6097 

F6098 

F6099 

F6025 

F6320 

F6323 

F6326 

F6420 

F6422 

F6423 

F6426 

F6325 

32 Cal. Stinger ® Rubber Balls HPT 3-10M 


Wood Multiple Baton Round INT 10-45M 

Foam Rubber Multiple Baton Round HPT 1.5-10.5M 


Direct Impact OC INT 1.5-40M 

Direct Impact Inert INT 1.5-40M 

Direct Impact Marking INT 1.5-40M 

Direct Impact OC LE INT 1.5-40M 

Direct Impact CS LE INT 1.5-40M 

Direct Impact INERT LE INT 1.5-40M 

Direct Impact Marking LE INT 1 .5-40M 

eXact TM iMpact Sponge Round INT 1.5-40M 

F6530 40MM Reload Training Round N/A N/A 

12-GAUGE (2-3/4” TRANSPARENT CASING) 

F3016 

F3020 

F3021 

F3027 


32 Cal. Stinger ® Rubber Balls High Velocity HPT 5-12M 

Rubber Fin Stabilized HPT 3 -10.5M 

Drag Stabilized Round INT 6-21M 

FERRET ® BARRICADE PENETRATING ROUNDS 

F1162 

F1192 

CS Ferret Liquid Barricade Penetrator HPT 10-50M 

CS Ferret Powder Barricade Penetrator HPT 10-50M 

F1262 40mm CS Liquid Ferret ® Round HPT 10-50M 

12-GAUGE PROj ECTILES bARRICADE PENETRATING ROUNDS 

F3012 

F3090 

F1095 

F1096 

F1097 

F1098 

CS Liquid Barricade Penetrator HPT 10-30M 

OC Powder Barricade Penetrator SPT 10-30M 

OC Rubber Ball Blast Grenade INT 3-25M 

CN Rubber Ball Blast Grenade INT 1.6-10M 

CS Rubber Ball Blast Grenade INT 1.6-10M 

Practice Rubber Ball Blast Grenade N/A 1.6-10M 

RETAIL DISPLAYS 

MK-2, MK-3, 



CHEMICAL AGENT DEVICES 

GRENADES 

F1071 

F1082 

F1073 

F1083 

F1026 

F1092 

F1016 

F2040 

CN Spede-Heat Continuous Discharge HPT 10-50M 

CS Riot Control Continuous Discharge HPT 10-50M 

MAX HC Large Continuous Discharge HPT 15-40M 

MAX HC Military Style Smoke HPT 15-40M 

CS Triple Chaser Sep. Canister (3) HPT 10-50M 

CS HanBall Rubber Ball HPT 10-150M 

CS Pocket Tactical HPT 10-150M 

OC Flameless Expulsion SPT 1-10M 

F2041 CN Flameless Expulsion SPT 1-10M 

F2042 CS Flameless Expulsion SPT 1-10M 

F2043 P Flameless Expulsion SPT 1-10M 

F1044 

OC Instantaneous Blast SPT 3-10M 

F1031 CN Flameless Tri-Chamber HPT 1-10M 

F1032 

CS Flameless Tri-Chamber HPT 1-10M 

F1033 Smoke Flameless Tri-Chamber HPT 1-10M 

F1050 

F1140 

F1065 

F1067 

OC/CS Aerosol SPT 1-5M 

OC Muzzle Blast Powder Blast Disp. SPT 3-10M 

Military Style Green Smoke HPT 10-50M 

Military Style Red Smoke HPT 10-50M 

F1040 Instantaneous Blast Powder Grenade SPT 3-10M 

F6040 40mm OC Muzzle Blast Powder SPT 3-10M 

F6181 40mm CN Long-Range Spede-Heat HPT 80-150M 

F56544 Aerosol Grenade, 2 oz. SPT 1-10M 

F56594 Aerosol Grenade, 6 oz. SPT 3-10M 

37MM PROj ECTILES 

F1181 

F1182 

F1171 

CN Long Range Spede-Heat - 150 yds HPT 80-150M 

CS Long Range Spede-Heat - 150 yds HPT 80-150M 

CN Skat-Shell Mult. Projectile (5) HPT 75-100M 

DISTRACTION DEVICE ® ,STINGER ® , 

BREACHING ROUNDS AND ACCESSORIES 

DISTRACTION DEVICES ® MODELS AND ACCESSORIES 

F7000 Multi-Port Plus Body INT 1.6-10M 

F7001 

Multi-Port Plus 15 Gram Reload, 

Dist. Dev. Charge (Case of 24) INT 1.6-10M 

F7001SC 15 Gram Reload, Dist. Device Charge 

(Case of 24) With secondary safety clip INT 1.6-10M 

F7001NR #25 Tactical Distraction Device INT 1.6-10M 

F8001 

Fuel Air Distraction Device ® INT 1.6-10M 

F8001NR Fuel Air Distraction Device ® INT 1.6-10M 

F8922 Mini Bang Distraction Device ® INT 1.6-10M 

F8933 Low Roll Distaction Device INT 1.6-10M 

F7001CI CMD INT Command Initiation Reload INT 1.6-10M 

F150944 1000’ Spool of Shock Tube N/A N/A 

F7023 

F7040 

F7030 

24-Pack of Shock Tube Splicers N/A N/A 

Initiator (Pin Flare) N/A N/A 

Staging Spike N/A N/A 




STINGER ® RUBBER BALL GRENADES 

F1088 

CS Stinger ® 32 Cal. Rubber Balls with CS INT 3-25M 

(Case of 10) 

F1089 OC Stinger ® 32 Cal. Rubber Balls with OC INT 3-25M 

(Case of 10) 

F1090 RP Stinger ® 32 Cal. Rubber Balls with RP INT 3-25M 

(Case of 10) 

BREACHING ROUNDS 

F3105 

TKO Breaching Round N/A N/A 

LAUNCHERS & ACCESSORIES 

GAS GUNS 

F1314 

F1315 

F1316 

Smooth Bore Gas Pistol N/A N/A 

Smooth Bore Full Stock Gas Gun N/A N/A 

Smooth Bore Tactical Grip Gas Gun N/A N/A 

F1319 37mm Multi-Launcher w/Composite Stock N/A N/A 

F1322 37mm Multi-Launcher w/Folding Stock N/A N/A 

F1325 40mm Single Shot N/A N/A 

F1375 40mm Multi Shot N/A N/A 

F1377 40mm Penn Arms Multi-Launcher N/A N/A 

LAUNCHING CARTRIDGES 

F1210 

F1270 

GAS MASKS 

12-gauge Launching Cartridge N/A N/A 

37 MM Launching Cartridge N/A N/A 

OPTI-FIT CBRN GAS MASK 

F1740 Small N/A N/A 

F1741 Medium N/A N/A 

F1742 Large N/A N/A 

F1745 

CBRN Canister N/A N/A 

OPTI-FIT TACTICAL GAS MASK 

F1787 Small N/A N/A 

F1788 Medium N/A N/A 

F1789 Large N/A N/A 

F1785 

Tactical Riot Control Canister N/A N/A 

BREACHING TOOLS 

WALLBANGER KITS 

F1005 Premium WallBanger System N/A N/A 

F1006 Bang-N-Breach System N/A N/A 

F1007 WallBanger Tool Kit N/A N/A 

F1008 Standard Double WallBanger Bang Pole Kit N/A N/A 

F1009 Deluxe Double WallBanger Bang Pole Kit N/A N/A 

F1010 Remote DoorKey System N/A N/A 

WALLBANGER COMPONENTS 

F1001 Single WallBanger N/A N/A 

F1002 Double WallBanger N/A N/A 

F1003 OC Blaster N/A N/A 

F1004 DoorKey N/A N/A 


PREMOLDED


64 



Code:1168410


Code:1167700 




66 



Code:1165800


Code:1165900 




Model 527/526 

Hand held investigation mirrors 

Code #SM526 

The series 527 is our economical lightweight fiberglass telescoping, 

complete with wheels. 

• Length: extended 55”(139.7 cm), collapsed to 27”(68.58 cm) 

• Complete with 8”(20.32 cm) convex (optional flat) acrylic mirror 

• Mirror lens is replaceable and interchangeable 

• Multi angle mirror & permanent tension arm allows flexible mirror adjustment 

• Optional flashlight Clip for “D” cell flashlights 

• Complete with 4 multi directional caster wheels 

• Low wheel base


AN/PAS-23 

Mini Thermal Monocular (MTM) 

L-3 Warrior Systems’ pocket-sized MTM has an ergonomic design that is 

handheld or tripod mountable and features an integrated laser pointer. This 

thermal imager allows high resolution observation and target identification 

under adverse conditions from low to no light. 

Features 

• Available with either IR or visible laser pointer 

• Optional 3X extender lens for long range man-sized detection 

• Optional weapon mount or helmet-mounted accessories 

• Optional LCD screen for larger viewing area 

• Optional cable enables capture, download, and storage of 

160 thermal images 

Note: Please contact our office for more details 

Thermal Imaging 

Systems 

Thermal Imaging 

Systems 


WTM 

Weapon Thermal Monocular 

Based upon the Mini Thermal Monocular design, the rugged, lightweight WTM 

has a Picatinny rail interface and is designed to withstand the recoil of tactical 

loads. It can also be used handheld or tripod mounted. This WTM allows for 

high resolution observation and target identification under adverse conditions 

from low to no light and features an integrated laser pointer. 

Features 

• Available with either IR or visible laser pointer 

• Optional 3X extender lens for long range man-sized detection 

• Optional weapon mount or helmet-mounted accessories 

• Optional LCD screen for larger viewing area 

• Optional cable enables capture, download, and storage of 

160 thermal images 

M963 

Night Vision Goggle (NVG) 

Night Vision Goggle (NVG), (M963) 

The NVG with Gen III night vision image tube is typically worn either head 

or helmet mounted. When used with optional helmet mount, goggle will 

The NVG automatically with Gen III night shut vision off image in the tube up is position. typically worn An either integrated head or helmet infrared mounted. (IR) LED When 

used with illuminator optional helmet provides mount, short goggle range will automatically illumination shut allowing off in the up such position. activities An integrated as 

infrared map (IR) LED reading, illuminator night provides repairs short or range maintenance illumination allowing tasks in such extreme activities darkness. as map reading, 

night repairs Features or maintenance tasks in extreme darkness. 

• Hands-free or one-hand operation 

Features • Integrated IR illuminator 

• Hands-free • High or light one-hand cut-off operation tube protection 

• Integrated • Low-battery IR illuminatorindicator 

in eyepiece 

• High • light Self-contained cut-off tube protection system operating on a single AA battery 

• Low-battery indicator in eyepiece 

• Self-contained system operating on a single AA battery 


Thermal 

Systems


70 

The M914 A is one of the most 

versatile night vision systems available 

today. It can be used as a hand-held pocket scope, a helmet 

mounted monocular, or a weapon sight when mounted in 

tandem with an infrared laser aimer or other night vision 

compatible primary optic. Additional features include a 

low battery indicator located in the eyepiece and an active 

projected infrared LED that provides short range illumination 

for activities such as map reading. 



Great for Day & 

Night Operations! 

Benefits of L3 M 914 Night Vision M-914 A: 

• Hands-free or one-hand operation 

• High light cut-off tube protection 

• Mounts available for head, helmet or weapon interfaces 

• Compact, lightweight and multi-purpose 

• Generation III night vision 

• U.S. manufactured image intensifier tube 

Features of L 3 M-914 Night Vision M-914A: 

• One of the most versatile night vision systems available 

• Offers capabilities of a hand-held pocketscope, a right or left 

eye-mounted monocular and a weapon sight when mounted 

in conjunction with an infrared laser aimer night vision-compatible 

primary optic 

• An Active projected infrared LED provides short range illumination 

allowing such activities as map reading 

• Self-contained system operation on a single AA battery 

• Low-battery indicator in eyepiece 

• Optional 3X and 5X Magnification 

• Hands-Free or One-Hand Operation 

• High Light Cut-Off Tube Protection 

• Manual Gain Control 

• One-Year Warranty Standard 

Package Contents: 

• L-3 Infrared Products M914 PVS-14 Type Night Vision Monocular 

• Operation Manual 

• Soft Carrying Case 

• Battery 

• Demist Shield Assembly 

• Lens Paper 

• Shoulder Strap 

• Retainer Cord 

• Head Mount Assembly 

• Weapon Mount and Head/Helmet Mount Adapter 

Code : 245620-005


Code : 7070410-0001 

FOCAL PLANE 

ARRAY 

THERMAL 

IMAGING 

PERFORMANCE 

OPTICS 

VIDEO 

POWER 

ENVIRONMENTAL 

CHARACTERISTICS 

PHYSICAL 

CHARACTERISTICS 

ORDERING 

INFORMATION 

CAMERA 

FEATURES 

STANDARD 

EQUIPMENT 

FEATURES xp 

MATERIAL & STRUCTURE Amorphous Silicon Microbolometer 

PIXEL COUNT RESOLUT 160 x 120 

SPECTRAL RESPONSE 

THERMAL SENSITIVITY ≤50 mK 

START ~ 4 seconds (includes 2 second display of start-up logo) 

BRIGHTNESS/CONTRAST Fully automatic 

RANGE TO DETECT 

HUMAN ACTIVITY 

SUSCEPTIBILITY TO 

BLINDING VISIBLE LIGHT 

Up to 1500ft (450m) 

INFRARED POLARITY White Hot 

FOV H x V 11° x 8° 

FOCAL LENGT 25mm 

MINIMUM FOCUS DISTANCE ~ 3ft (1m) 

OUTPUT FORMAT Analog: NTSC or PAL on rear outlet jack 

VIEWFINDER DISPLAY Monochrome LCD (320 x 240 pixels) 

VIEWFINDER DIMMING I 

POWER SOURCE 2 AA batteries 

OPERATING TIME ~ 2.5 hours with alkaline, ~ 6 hours with lithium 

AUXILIARY POWER 12VDC input on rear outlet jack 

OPERATING TEMPERATURE -4°F to 140°F (-20°C to 60°C) 

STORAGE TEMPERATURE -4°F to 176°F (-20°C to 80°C) 

WATER & SHOCK RESISTANCE Waterproof to 9ft (3m) submersion, buoyant in fresh water. Shockproof to 6ft (2m) drop. 

EMC COMPLIANCE FCC Part 15 & CE Mark 

SIZE 5-1/4"L x 4-1/2"W x 2"H (13.4 x 11.4 x 5.1cm) 

WEIGHT 13oz. (381g), batteries installed 

EYE CUP Integral to camera body with 2" eye relief 

CAMERA PART NUMBERS NTSC: 7070410-0001 / PAL: 7070410-0003 

– Enhanced DSP image processing 

– On-screen battery level indicator 

– Left- or right-hand operation with rugged slip-resistant grip 

– 1/4-20 tripod mount 

– Hard protective case 

– 2 AA alkaline batteries 

– Neck strap & wrist strap 

BENEFITS: 

X200xp x TECHNICAL TECHN SPECIFICATIONS: 

None 

– Tactile battery loading feature for stealth nighttime operation 

– External power input and video output jacks 

– L 

– Lens cover 

– Lens cleaning cloth 


- Greater scene detail with improved clarity, sharpness and overall image quality 

- 

darkness with no blooming from lights 

- Fully dimmable display minimizes night blindness 

- 

on the run 

FEATURES: 

- 

- 

up to 450 meters away 

- Sophisticated image processing for best-in-class image quality 

- Rugged design with integral rubber eye cup can survive accidental drops and 

submersion to 9 feet 

- Pocket-sized, weighing only 13 ounces 

- Operates on 2 AA lithium or alkaline batteries 



FM2000 

Friskmaster with Honeywell Spectra ® 

• Honeywell Spectra® knit liner protects from sharp objects 

• Constructed of water-resistant premium leather 

• Short elasticized cuff 

• Sizes XS-XXXL 

SB8500 Friskmaster Supermax 

• Premium goatskin leather construction 

• Dyneema ® liner offers unparalleled cut protection to prevent injuries from 

knives, razors and other sharp objects - for the ultimate in cut protection, 

comfort and dexterity 

neema ® offers the protection required for the highest class in the 

88 test standard 

is impregnated with a water and fade-resistant treatment 

, extended cuff 

L 

SB8500 

Friskmaster Supermax • Premium goatskin leather construction 

• Dyneema® liner offers unparalleled cut protection to prevent injuries from 

knives, razors and other sharp objects - for the ultimate in cut protection, 

comfort and dexterity 

• Dyneema® offers the protection required for the highest class in the 

EN 388 test standard 

• Leather is impregnated with a water and fade-resistant treatment 

• Elasticized, extended cuff 

• Sizes XS-XXXL 

72 



MP100 

Defender MP 

• High-density EVA foam padding for knuckles, fingers and forearm protection 

• 100% goatskin leather with water-repellant finish 

• Hatch® signature Ergo-Cut in palm for superior fit and 

maximum dexterity 

• Elasticized wrist 

• Hook and loop closures keep glove taut 

• Index finger is left unpadded for trigger control 

• Sizes S-XXL 

RFK300 

Street Guard with KEVLAR ® 

• Design offers excellent protection from cuts and sharp objects 

over the entire hand 

• Digitized synthetic leather palm with Extreme-Grip nonslip 

cradle, offering sure grip and positive weapon control 

• 9 oz. KEVLAR® interlock liner in the inside of the hand and fingers 

as an extra safeguard 

• Neoprene and nylon spandex laminated back allows air 

circulation for maximum comfort while providing a proper, snug fit 

• Hook and loop closure keeps glove firmly in place 

• Sizes XS-XXXL


SP100 

Defender II with Steel Shot 

• Double-layered goatskin palm for extreme durability; the most advanced, 

weighted defense glove available 

• Spandex back, Ergo-Cut design, double-layered goatskin palm, and hook 

and loop closures offer a comfortable fit and grip 

• Each finger is foam-padded for protection, while 4 oz. of steel shot in each 

knuckle area stops aggressors in their tracks 

• Spandex fabric allows for freedom of movement 

• Hook and loop closures help keep glove taut 

• Sizes S-XXL 

EXOTECH ® 

Hard Shell Riot Control System 

• The back panel features attachment points to accommodate the HUEX100 

Hydration System 

• Provides substantial protection from blunt force trauma 

• Contour molded polyethylene outer shell features impact ridges that disperse 

the brunt of the blows 

• EVA foam inner padding cushions the body 

• Soft brushed tricot and mesh lines the inside to reduce abrasion and provide 

long-term comfort 

• Each piece of the ExoTech system fastens and adjusts quickly with durable 

polypropylene and elastic straps with hook and loop closures, allowing a 

custom fit for a wide variety of body types 

Sizing 

PATENTED 

Proper sizing for the ExoTech System must be obtained from the following 

series of measurements and information. 

ECB100 

Upper Body/Shoulder 


• Polyethylene outer shell 

• L2500 EVA foam & 3 mm polyethylene plate chest/back/arm padding 

• EVA foam & polyethylene plate shoulder padding 

• Sponge foam & polyester tricot chest/back/shoulder lining 

• Mesh chest/back/shoulder outer covering 

• Mesh arm protector lining 

• Moisture-wicking fabric for comfort 

• Double riveted polypropylene connector straps and hook and loop fasteners 

• Commercial-grade elastic adjustment straps with hook and loop fasteners 

• Optional reflective POLICE, SHERIFF or CORRECTIONS labels are available 

and can be affixed to the front of the system 

• Sizes S, M, L, XL 

• Chest circumference 

• Waist circumference 

• Thigh circumference 

• Forearm (wrist to elbow) circumference 

• Knee to ankle length 



74 

TS70 

Hard-Shell Shin Guard 

• PVC knee cap 

• EVA foam knee padding 

• 600-denier black polyester outer covering 

• Tricot & sponge knee and foot protector inner lining 

• Polyethylene knee and foot protector outer shell 

• PVC padded suspension braces 

• Polyester adjusters with hook and loop fasteners 

• Adjustable/removable foot protector 

• Padded ankle protector 

• All components are riveted to outer shell with hook and loop fasteners 

• Sizes XS/S, M/L, XL/XXL 

ETP200 

Thigh & Groin Sections 

Thigh Section 


• Laminated EVA foam & L2500 EVA foam 

• Mesh inner lining 

• 150-denier polyester outer covering 

• Elastic adjusters with hook and loop fasteners 


Groin Section 

• EVA foam padding with mesh outer covering 

• Inner polyethylene shell 

• Commercial-grade elastic adjusters and connectors 



EFP150 

Forearm 


• EVA foam & polyurethane sponge padding 

• Mesh inner lining 

• 420-denier nylon outer covering 

• Commercial-grade adjusters with hook and loop fasteners 


EXOTECH ® SIZING REFERENCE GUIDE 

TORSO / SHOULDERS - ECB100 

XS / SMALL - 3511 

Height 5’0” - 5’8” (152.4 - 172.7 cm) 

Weight 95 - 140 lbs. (43 - 63.5 Kg) 

Chest 36” - 40” (91.4 - 101.6 cm) 

MEDIUM / LARGE - 3512 

Height 5’6” - 6’ (167.6 - 182.9 cm) 

Weight 140 - 200 lbs. (63.5 - 91 Kg) 

Chest 40” - 44” (101.6 - 111.8 cm) 

LARGE / XLARGE - 3510 

Height 5’10” - 6’2” (177.8 - 188 cm) 

Weight 160 - 220 lbs. (72.75 - 100 Kg) 

Chest 44” - 50” (111.8 - 127 cm) 

XXLARGE / XXXLARGE - 3513 

Height 5’10” - 6’4” (177.8 - 193 cm) 

Weight 200 - 260 lbs. (91 - 118 Kg) 

Chest 50” - 60” (127 - 152.4 cm) 

ELBOW & FOREARM - EFP150 

XS / Small - 3517 14” wrist to elbow (35.6 cm) 

Medium / Large - 3518 15” wrist to elbow (38.1 cm) 

XLarge / XXLarge - 3519 16” wrist to elbow (40.6 cm) 

SHIN GUARD - TS70 

Medium - 3514 9” shin 13.25” TL (22.9 - 33.7 cm) 

Large - 3515 10” shin 14.5” TL (25.4 - 36.8 cm) 

XLarge - 3516 11” shin 16.5” TL (27.9 - 41.9 cm) 

THIGH / GROIN - ETP200 

XS / Small - 3520 26” - 34” (66 - 86.4 cm) 

Medium / Large - 3521 34” - 38” (86.4 - 96.5 cm) 

XLarge / XXLarge - 3522 38” - 44” (96.5 - 111.8 cm)


KNEE/ELBOW PADS 

XTAK 

100/300/400/500 

XTAK Knee Pads 

• Extremely light and flexible with superior protection 

and shock absorption with the flexibility to move the 

way your body moves 

• Unique X-shaped thermal plastic urethane (TPU) shell 

• EVA high-density foam for superior shock absorption 

• Lightweight TPU and Cordura® nylon construction 

• Forceful spring-back action that gives you the protection you need 

• Cool Max ® inner surface for wicking moisture away 

• Anti-skid inner surface to keep pad secured 

• Spandex adjustable straps with Hatch Rapid Deployment Clips and hook 

and loop closure for secure fit 

• One size fits all 

XTAK150/350/450/550 

XTAK Elbow Pads 

• Elbow pads with the identical features listed above 

• Elbow attachment features comfortable neoprene back with 

adjustable hook and loop and other features 

• Stretch neoprene attachment straps with hook and loop closure 


BLACK 

XTAK150 

EP300 

Centurion Elbow Pads 

DIGITIZED 

CAMO 

XTAK350 

• Elbow pads with all of the identical features as the KP250 

OD 

XTAK450 

PATENTED 

K 

BLAC 

0 

XTAK10D 

DIGITIZE 

CAMO0 

XTAK30 

OD 

XTAK40 

0 

COYOTE 

XTAK500 

PATENTED 

COYOTE 

XTAK550 

KP250 

Centurion Knee Pads 


• Half inch, high-density foam covered in durable Cordura ® nylon 

• Polyurethane thermoplastic nonslip caps fastened with 

color-keyed grommets provide additional shock absorption and ensure long-lasting wear 

• Dual hook and loop fastened 1.5” wide (3.8 cm) elastic straps with reinforced bar tacking 

provide a comfortable and secure fit for all sizes 

• Hatch Rapid Deployment Clips for quick don and doff 


BLACK 

OD 

NE35 

Centurion Neoprene 

Elbow Pads 

• Elbow pads with all of the identical features as the NK45 

NK45 

Centurion Neoprene 

Knee Pads 

EP300/KP250 

• Padding consists of shock-absorbing 10mm foam and a second 

layer of polyurethane foam, covered by a durable nylon 

laminated neoprene outer layer 

• Strategically placed Eastex ® Slip-Not material provides 

excellent grip and extends wear 

• Non-reflective and silent 

• Flexible design fits comfortably under or over clothing 

• Hook and loop elastic closures provide a comfortable and secure fit 


EP300G/KP250G 



76 







78 







Model 8320 

Tranzport Hood 

• Detainees who spit or bite are unpleasant to deal with and can be 

hazardous to the health of your personnel 

• The Tranzport Hood features a bacteria-filtering medical-grade fabric, 

which helps to contain contaminants and makes attempts at biting ineffective 

• A secure-lock tab and elastic neckband allow for convenient application 

and prevents self-removal of the hood, without limiting the individuals 

range of vision 

80 



Model 8310 

Spit Net 

• The Spit Net affixes under the arms for additional security while transporting 

threatening subjects 

• Ideal for prisoner transport, it protects against spitting and biting 

• The mesh netting and bacteria-filtering fabric gives the subject full visibility 

and breathability while helping restrict the spread of biological contaminants





82 

SHIELDS 

2036H/2448H Peacekeeper Shield 

• Constructed of 4 mm shatter-resistant polycarbonate 

• Lightweight 

• Ambidextrous 

• Weight: 6 lbs., 6.8 lbs. 

Triangle Handle 

2036H: 20" x 36" (50.8 cm x 91.4 cm) 

2448H: 24" x 48" (60.9 cm x 121.9 cm) 

2448E Capture Shield 


• Ambidextrous 

• Features a convex design to restrain an attacker against 

a vertical structure without excessive force 


Capture Handle 

2448E: 24" x 48" (60.9 cm x 121.9 cm) 

H7000/7001/7002/7003 Shield Decals 

• Premium outdoor-quality vinyl 

• Silkscreen printed 

• Fade-resistant 

• White lettering with black background (as shown) 

• Dimensions: 5" W X 23" L (12.7 cm x 58.4 cm) 

• Available in: 

- POLICE (H7000) 

- SHERIFF (H7001) 

- CORRECTIONS (H7002) 

- POLICÍA (H7003) 

• All shields meet ASTM D3763 and ASTM D1929 standards 

• Shields are shipped disassembled 

• Optional decals are available as shown below 

OPTIONAL POLICE 

DECAL SHOWN 



2036C/2448C Peacekeeper II Shield 


• Lightweight 

• Ambidextrous if rotated 180° 

• Comfort-molded cradle handle features high-density foam for comfort 

and strength 

• Weight: 6 lbs., 6.8 lbs. 

Comfort-Molded Handle 

2036C: 20" x 36" (50.8 cm x 91.4 cm) 

2448C: 24" x 48" (60.9 cm x 121.9 cm) 

OPTIONAL SHERIFF 

DECAL SHOWN 

safariland.com/protectivegear 

HATCH 

RMOR


P2000 

The Heckler & Koch P2000 

The design specifications when starting development on the P2000 were tough, 

concise and short. They reflected the difficulties faced by today’s police service and 

the resulting requirements to be met by a service pistol. 

A pistol had to be designed with features that offer a high degree of safety and also 

effectively minimise the probability of so-called “Handling related stress drivers” 

during a police mission. 

Highest possible safety and operational reliability under all conditions Optimum 

ergonomics, capable of being adapted to each individual user. Simple and easy 

operation by both right and left handed shooters. 

P30 

The Heckler & Koch P30 - 

safety with function 

The P30 is one of the most modern pistols of our time. During its development, 

the most important requirements were flexibility, functionality and safety. Ergonomics 

of the grip have been markedly improved by interchangeable backstrap inserts 

and lateral plates. In combination with the ambidextrous operating controls, this 

pistol can be individually adapted to almost any user. No compromises have been 

made regarding safety. The P30 has a self-decocking, double action hammer with 

a firing pin block safety that eliminates the need for a manual safety. Its advanced 

loaded chamber indicator, which is easily seen and felt, positively indicates a loaded 

chamber. 

P226 X-Five 


SIG SAUER has been selling superb firearms to civilians, 

military, and law enforcement for decades. SIG SAUER handguns 

have been a leader in these markets because they are tough and reliable. 

Specifications : 

• Calibre: 9mm Para, .40 S&W • Adjustable trigger pull weight 

• Conversion kit: 9mm Para available • Adjustable trigger distance 

• Extended slide for 5” barrel • Adjustable trigger stop 

• Extended frame • Short trigger path 

• Manual safety on both sides • Wide curved beavertail 

P250 Compact 

The P250, a modular pistol that allows the shooter to 

change caliber and size at will. The SIG SAUER P250 was designed 

specifically to address the future needs of the military, law 

enforcement, and civilian shooters around the world. 

The P250 is available in the most popular calibers (9mm, .357SIG, .40S&W and 

.45ACP). The P250’s innovative design enables the shooter to quickly remove the 

functional mechanism and place it into the polymer grip size of his choice. This 

allows an immediate change in caliber and size; (subcompact, compact and full). 

And after each change the pistol delivers both outstanding accuracy and reliable 

functionality. 

Sig Sauer P226R 

The P226 is the pistol that sets the standard by which 

all other combat handguns are measured. In use by the U.S. Navy 

SEALs, Federal agents, and numerous law enforcement agencies in 

Canada, the P226 has continually proven itself. The P226’s 

exceptional ergonomics and balance make this high capacity full-sized pistol easy 

to fire. Its longer barrel yields better ballistic performance and accuracy. Its solid 

stainless steel slide is Nitron treated for added strength and wear resistance. 

The P226 is available in 9mm, .357 SIG or .40 S&W. Available with or without 

picatinny rail. 


®


AMMUNITION PROGRAM 

84 



ITEM PRODUCT PRICE P 

NO CODE PROJECTILE VELOCITY ACCURACY PERFORMANCE CHARACTERISTICS 1000 RD 

1 53880 

2 P40HST1 

3 53824 

5 P9HST2 

40 S&W, 180 grain, Total Metal Jacket, 

plated flat nose bullet. Ogive replicates 

that of the gold Dot Hollow Point service 

cartridge. 

40 S&W, 180 grain, HST Jacketed Hollow 

Point lead core, brass jacket (Alloy No. 

220). 

9MM LUGER, 124 grain, TMJ 

electrochemically bonded bullet. Lead 

core of bullet is seamlessly encapsulated 

inside a 100% pure copper jacket. 

9MM LUGER, 147 grain, HST Jacket 

Hollow Point lead core, brass jacket (Alloy 

No. 220) 

6 T223A .223 REM, 55 grain, Hi‐Shok SP 

8 LE12700 12 GAUGE, 2‐3/4" , 9 pellets 

10 GM308M 

.308 WINCHESTER, 168 grain, Sierra 

Match King Boat‐Tail Hollow Point 

11 F13000 12 GAUGE, 2‐3/4" , 12 pellets 

12 53378 

.40 S&W, Reduced Hazard Training, 115 

grain Clean Fire Frangible. Sintered 

copper‐tin bullet. 

1,000 +/‐ 50 fps 

from a SAAMI 

barrel 

1,000 +/‐ 25 fps 

using a 4" SAAMI 

barrel. 

1,090 +/‐ 50 fps 

from a standard 4" 

SAAMI barrel 

1,000 +/‐ 25 fps 


barrel 

3,215 +/‐ 50 fps 


barrel 

1,325 +‐ fps at 3' 

from the muzzle of 

a SAAMI barrel 

2,650 +/‐ 50 fps 


barrel 

1,290 +/‐ 50 fps at 

3' from the muzzle 

of a SAAMI barrel 

1,410 +/‐ 50 fps 

from a 4" SAAMI 

barrel. This velocity 

very closely 

replicates recoil and 

trajectory of service 

loads. 

Average of 5, 5‐shot consecutive 

groups not to exceed 3" at 25 yds 

3, 5‐round groups with maximum 

average extreme spread of 2" at 50 

yds, using a SAAMI barrel 


groups not to exceed 3" at 25 yds. 


average extreme spread of 2" at 50 

yds, using a Mann Rest Test System. 


average extreme spread of 3" at 

200 yds, using a Mann Rest Test 

System. 

5 round maximum average 

extreme spread of 15" at 25 yards 

(IC choke) 


average extreme spread of 1.5" at 


System. 

75% at 40 yds in a 30" circle (full 

choke) 



Practice/Training round with 180 grain. TMJ bullet. 

Bullet ogive replicates that of other .40 S&W Gold 

Dot Hollow Point service cartridge. Accuracy of 

this product is excellent 

Training Ammunition. Accuracy of this bullet is 

excellent due to the uniformity of thickness of the 

bonded jacket. Airborne lead at the firing pint is 

eliminated by seamlessly enclosing the lead core. 

No toxic heavy metals are present in the primer 

formulation. 

This bullet is designed to break into very small 

pieces when impacting a hardened steel plate. 

Five‐Pie identifier for easy recognition by recruits. 

Special single piece bullet is accurate, feeds 

flawlessly, and breaks up with greatly reduced 

ricochet risk. 

$ 2 

$ 2 

$ 2 

$ 2 

$ 4 

$ 4 

$ 8 

$ 8 

$ 3




ITEM PRODUCT PRICE P 

NO CODE PROJECTILE VELOCITY ACCURACY PERFORMANCE CHARACTERISTICS 1000 RD 

13 53365 

9MM LUGER, Clean Fire, Reduced Hazard 

Training, Frangible, 100 grain compressed 

and sintered bullet. 

14 T223L .223 REM, 64 grain, SP 

16 LEB127RS 12 GAUGE, 2‐3/4" Shotshell, 1 oz. slug 

17 53880 

18 53826 

40 S&W, 180 grain, Total Metal Jacket, 

plated flat nose bullet. Ogive replicates 

that of the gold Dot Hollow Point service 

cartridge. 

9MM LUGER, 147 grain Total Metal 

Jacket plated flat nose bullet 

19 F127RS 12 GAUGE, 2‐3/4" Shotshell, 1 oz. slug 

1,270 +/‐ 50 fps 


barrel. 

3,050 +/‐ 50 fps 


barrel 

1,600 +‐ 50 fps at 3' 

from the muzzle of 


1,000 +/‐ 50 fps 

from a SAAMI 

barrel 

985 +/‐ 50 fps from 


1,600 +/‐ 50 fps at 



21 LE308TT2 308 WIN, 168 grain, Tactical bonded tip 2,650 fps 

23 LE13200 12 GAUGE, 2‐3/4" Shotshell, 9 pellets 

1,145 +/‐ 50 fps at 







200 yds using a Mann Rest Test 

System 


groups not to exceed 3" at 25 yds 



5" E.S. at 50 yds in test barrel 




System 

100% lead free, superbly accurate, frangible 

bullet. Primer conforms to SAAMI sensitivity 

requirements while excluding toxic ingredients. 

This velocity provides reliably functioning, realistic 

recoil and breaks into very fine particles without 

backsplash after impact with hard steel targets or 

backstops 

Practice/Training round with 180 grain. TMJ bullet. 

Bullet ogive replicates that of other .40 S&W Gold 

Dot Hollow Point service cartridge. Accuracy of 

this product is excellent 

Ballistic equivalent of Speer 9mm, 147 grain Gold 

Dot Hollow Point. Very clean burning. Excellent for 

indoor range training and practice. 

24 XM200CS 5.56MM, M200 blank $ 3 

25 P45HST2 

26 AE223N 

45 ACP, 230 grain, HST Jacketed Hollow 

Point Lead core, copper alloy jacket. 

.223 REMINGTON, 62 grain, Full Metal 

Jacket, Boat‐Tail 

890 +/‐ 25 fps using 

a 5" SAAMI barrel 

3,050 +/‐ 50 fps 


barrel 



50 yds, using a SAAMI barrel. 




System 


$ 4 

$ 4 

$ 5 

$ 2 

$ 2 

$ 7 

$ 2,0 

$ 4 

$ 4 

$ 4



ITEM 

NO 

86 



PRODUCT 

CODE PROJECTILE VELOCITY ACCURACY PERFORMANCE CHARACTERISTICS 

27 LE13300 12 GAUGE, 2‐3/4" Shotshell, 8 pellets 

28 BC223NT5A 

29 LE223T3 

30 BC556LOTM2 

31 LE223T3 

32 53378 

33 XMBC13200LS 

34 LE132DB 

223 REMINGTON, 55 grain, Frangible 

Copper/Tin 

.223 REMINGTON, 62 grain, Bonded Soft 

Point 

5.56 X4 45MM NATO< 50 grain Copper 

Jacketed Non‐toxic 

.223 REMINGTON, 62 grain, Bonded Soft 

Point 

.40 S&W, Reduced Hazard Training, 115 

grain Clean Fire Frangible. Sintered 

copper‐tin bullet. 

12 GAUGE, 00 Buckshot, 9 pellets, 

Copper/Tin Frangible 

12 GAUGE, 2‐3/4", 475 grain, Powder 

Metal Frangible, Non‐Toxic Components. 

Powder metal is contained in one‐piece 

plastic wad. 

1,145 +/‐ 50 fps at 



3,100 +/‐ 50 fps 


barrel 

3,050 +/‐ 50 fps 


barrel 

3,100 +/‐ fps using 

a 24" SAAMI barrel 

3,050 +/‐ 50 fps 


barrel 

1,410 +/‐ 50 fps 


barrel. This velocity 

very closely 

replicates recoil and 

trajectory of service 

loads. 

1,500 +/‐ 50 fps at 


of a SAAMI barrel. 

1,300 +/‐ 50 fps at 


of SAAMI barrel 

5 round maximum average 

extreme spread of 14" at 25 yards 

(IC choke) 

Maximum average extreme spread 

of 5" at 100 yds, using a Mann Rest 

Test System 




System 

Maximum average extreme spread 

of 3.5" at 200 yds, using a Mann 

Rest Test System 

3 5‐round groups with maximum 



System 



Warning: This product may damage steel targets. 

Severe damage may occur with target material 

softer than AR500 steel armor plate. Target should 

be tilted down a minimum of 10° from vertical to 

minimize bullet splash back. 

62 grain bonded soft point bullet consists of a lead 

slug, 0% antimony, a precision drawn jacket of 

copper alloy, 95/5 copper/zinc. The core is 

chemically coated, inserted in the jacket and 

bonded at a precise high temperature. The 

bonding permits the bullet to display positive and 

consistent expansion through barrier test 

material. Bonding greatly reduces th risk of jacket 

core separations. 

Warning: This product may damage steel targets. 

Target should be tilted down a minimum of 10° 

from vertical to minimize bullet splash back. 

This bullet is designed to break into very small 

pieces when impacting a hardened steel plate. 

Five‐Pie identifier for easy recognition by recruits. 

Special single piece bullet is accurate, feeds 

flawlessly, and breaks up with greatly reduced 

ricochet risk. 

Conforms to US Military Performance 

Specification: PRF1990872, Rev. Feb.2007 

PRICE P 

1000 RD 

$ 4 

$ 5 

$ 1,0 

$ 5 

$ 1,0 

$ 3 

$ 7 

$ 3,1

R Nicholls Always at your side in the line of duty ! 


2 

PLATFORMS 

PLATFORMS 

HK416 

Caliber : 5.56 (.223 rem.) 

Action : Semi-automatic, short stroke piston, 

20/30 rounds magazine. 

Barrel : 14.5’’ cold forged steel with corrosion protective liner. 

Sight: Flip and/or Diopter 

The HK 416 is a 100% Mil. Spec. platform that is well known for 

its durability and reliability in harsh environments. All levers and 

functions are located at the same position as the M4/C-8 Platform. 

It comes standard with a 6 position adjustable stock, ambidextrous 

fire selector and Picatinny quad rails for accessories. 

Ruger SR556 

Caliber : 5.56 (.223 rem.) 

Action : Semi-Automatic short stroke piston 

20/30 rounds Magazines. 

Barrel : 16’’ cold forged steel with chrome liner. 

Sight : Flip Sight from Troy Industries. 

The Ruger SR556 is a 100% Mil. Spec. platform and all features, 

levers and functions are located in the same positions as the 

M4/C-8 platform. It comes standard with a Troy Industries 

Picatinny Quad Rail and flip sights. 

SIG 516 

Caliber : 5.56 (.223 rem.) 

Action : Semi-automatic, Short stroke 

piston 20/30 rounds magazines. 

Barrel : 16’’ cold forged steel corrosion protective treatment. 

Sight : Optional. 

HK G36K 

Caliber : 5.56 (.223 rem.) 

Action : Semi-automatic Short 

Stroke Piston 20/30 rounds magazines. 

Barrel : 12.5’’ Cold forged steel with corrosion 

protective liner. 

Sight : Flip and/or Diopter sight 

The SIG Sauer 516 is a 100% Mil. Spec. Platform. All levers and functions 

are located at the same position as the M4/C-8 platform. It 

is equipped with a picatinny quad rail, 5 position adjustable stock 

and integrated QD sling attachment. 

The Heckler & Koch G36 is a 100% Mil. Spec. platform fully modular, 

with ambidextrous fire selector, ambidextrous adjustable cocking 

handle, folding stock and the accessory rail can be mounted at 

3, 6 & 9 o’clock positions on the hand guard. 

Ruger Mini-14 

Caliber : 5.56 (.223 rem.) 

Action : Semi-automatic Garant Action, 

20/30 rounds Magazines. 

Barrel : 16’’ Corrosion protective treatment. 

Sight : Peep Sight. 

The Ruger Mini-14 benefits from the same legendary Garant Action 

as the Springfield M14. It is equipped with a 5 position. 

adjustable/folding stock and picatinny rails for accessories. 




R Nicholls 

88 

Always at your side in the line of duty ! 

CORRECTIONS ELECTRONIC SIGHTING SYSTEMS 

Electronic Sight Systems provide several advantages 

compared to iron sights: 

• Faster target acquisition • No loss of peripheral vision 

• No loss of depth perception • Single reference point of aim 

• No blurry vision of the target 

• Sight acquisition in a dark environment 

• Same point of aim/ point of impact for multiple users 

• Decreased training/qualification time 



• Can be used in conjunction with an iron sight EOTEC XPS2-0 

1/1. 

Battery : CR123A 3 volts lithium. 

Runtime : 600 hours. 

Reticle : Dot 1 MOA/ circle 65 MOA. 

AIMPOINT MICRO H-1 

1/1. 

Battery : CR2032 3 volts lithium. 


Reticle : Dot 4 MOA. 

INSIGHT TECH MRDS 

1/1. 



Reticle : Dot 3.5 MOA. 

DESIGNATED MARKSMAN 

1/4. 



Reticle : Permanent, illuminated 

or not, Dot 1 MOA. 

ELECTRONIC SIGHTING SYSTEMS 

EOTEC G23.FTS 

3/1 

AIMPOINT P.R.O. 

1/1. 

Batteries : DL 1/3 N lithium. 


Reticle : Dot 2 MOA. 



5103 

SB-WT 

• High density, closed-cell foam training baton 

• Flexible for lower impact 

• 2 sizes: 5103 - 24” (60.96 cm); 1” diameter 

5106 - 36” (91.44 cm); 1.5” diameter 

• Color: White 

• Weight: 24” 9.4 oz. 

36” 9.8 oz. 

5106 

Ultimate Straight Training Baton 

• Durable DuPont ® nylon material covers a neoprene sleeve, 

which is applied over a rigid core 

• Tip is dipped in vinyl for added strength and durability 

• Energy-absorbing construction allowsgeneral and / or specialized scenarios to 

be performed with greater ease and comfort 

5101 

PR-24 STSWT 

• High density, closed-cell foam training side handle baton 

• Color: White 

• Weighs 10 oz. 

5120 

Monadnock ® Practice Suit 

• Color-coded based on the escalation of-trauma charts 

• Provides realistic training opportunities 

• Easy to put on and take off 

• Breathable liner 

• Cleans with soap and water 


5002 

Universal Training Bag (UTB) 

• Helps bridge the gap between static and dynamic movement in training 

• Tactically used for baton physical encounter training: 

– Simulated training scenarios 

– Punching, kicking, elbowing, kneeing, etc. 

– Action-reaction response drills, including unarmed self-defense training and 

baton training 

• Easy to carry and store 

5006 

Universal Training Bag2 (UTB2) 

• Features a high-tech Force Deceleration Core to dissipate training blows 

from knees, elbows, fists or training-baton strikes with ease and comfort 

• Offers six hand positions to create multiple target positions around the human 

body, which develops target acquisition and application skills for more realism 

in training 

• Easy to carry and store 



90 







92 








Service & Sales Outlets 

Mississauga 

Longueuil 

2475 rue de la Province 

Longueuil, Quebec, J4G 1G3 

Tel.: 450-442-9215 

Toll Free: 1-888-442-9215 

Fax: 450-442-9581 

longueuildetail@rnicholls.com 

Toronto 

2199 Midland ave, unit 4 & 5 

Toronto, ON, M1P 3E7 

Téléphone : 416-285-0103 

Télécopieur : 416-285-9484 

torontoretail@rnicholls.com 

Ottawa 

Alberta 

Steve Olivier (Clothing) 

780-995-0190 

Glenn Stark (Equipment) 

780-233-5822 

British Columbia 

Mike Brownell (Clothing) 

778-772-0911 

Doug Anderson (Equipment) 

250-809-2200 

Manitoba 

Steve Olivier (Clothing) 

780-995-0190 

5300 Canotek Road, Unit 4 

Ottawa, Ontario, K1J 1A4 

Tel.: 613-747-3456 

Fax: 613-747-9882 

ottawaretail@rnicholls.com 

Mark Mlynarski (Equipment) 

306-842-1503 

New Brunswick 

Brent O’Connor (Clothing & Equipment) 

506-333-0198 

New Foundland & Labrador 

Brent O’Connor (Clothing & Equipment) 

506-333-0198 

Nova Scotia 

Sean McDonald (Clothing & Equipment) 

902-229-0822 

Gregg Flynn (Equipment Federal Agencies) 

902-850-3111 

Your Sales representatives / Vos représentants aux ventes... 

Ontario 

Tritchew, Ted (Sales Manager/ Ontario 

and western Canada) 

416-697-8975 

Anna Cardadeiro (Clothing) 

647-226-2521 

Bob Gleason (Clothing) 

647-223-9841 

Steve Sarault (Equipment Federal Agencies) 

613-371-6234 

Tom Opper (Southern Ontario /Equipment) 

647-223-1047 

6325 Dixie Rd., Unit 11 

Mississauga, Ontario, L5T 2E5 

Tel.: 905-670-4000 

Fax: 905-670-0670 

mssgaretail@rnicholls.com 

Quebec 

1175 boul. Charest Ouest 

Quebec City, Quebec, G1N 2C9 

Tel.: 418-688-9111 

Fax: 418-688-1424 

quebecdetail@rnicholls.com 

Halifax Area 

275 Rocky Lake Drive, Unit 11 

Bedford, NS, B4A 2T3 

Tel.: 888-834-1819 

Fax: 902-835-2470 

halifax.retail@rnicholls.com 

Prince Edward Island 

Sean McDonald (Clothing & Equipment) 

902-229-0822 

Quebec 

Meo, Mirella (Clothing) 

514-774-5149 

Millette, André (Clothing) 

514-951-1762 

Lech, Gabriel (Outaouais, Eastern 

Ontario / Clothing & Equipment) 

613-293-2613 

Frédéric Firenze (Equipment, 

Quebec North Shore) 

514-246-4249 

Fullerton Peter (Equipment, 

Quebec South Shore) 

514-606-9965 

Saskatchewan 

Olivier, Steve (Clothing) 

780-995-0190 


306-891-8611 

Yukon, Northwest Territories, 

Nunavut 

Olivier, Steve (Clothing) 

780-995-0190 


306-891-8611 

Always at your side in the line of duty 

2475 de la Province, Longueuil, Quebec, J4G 1G3 

Tel.: 450-442-9215 • Toll free: 1-888-442-9215 • Fax: 450-442-9581 

www.rnicholls.com • info@rnicholls.com 

CORRECTION_03/2012

CORRECTIONS - R. Nicholls Distributors

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?