owners manual cc25-2290 - Schuurman B.V.

WINCHMOUNT KITFor KAWASAKI ATVsOWNER’S MANUALMODEL NUMBER: 25-2290CUSTOMER MUST RECEIVE A COPY OF THISOWNER’S MANUAL AT TIME OF SALE© 2009 Cycle Country Accessories Corp.4/11/12MAN0136

Cable Clamp, Cable Stop & Roller Hawseare included in all Cycle Country Winch Kits4 16572Front of ATV3Model Number 25-2290Parts ListITEM NO. QTY. PART NO. DESCRIPTION1 1 CYC1618 Winch Mount Plate2 1 CYC1619 Brace3 1 CYC1620 Back Plate4 2 CYC1621 U-Bolt M8 x 35mm x 50mm5 10 CYC1621 Locknut M8 Nylock6 8 CYC1621 Flatwasher M87 6 CYC1621 M8 x 25mm Hex BoltHardware package part No. CYC16212

THIS WINCH MOUNTING KIT CAN BE USED TO MOUNT EITHER ACYCLE COUNTRY 1500/2500 WINCH, SUPERWINCH ATV2500 OR AWARN 15, 25 or 30 SERIES WINCH TO YOUR ATV. All directions referring to right and left are when the rider is sitting on the machine. Please Note: Theroller hawse, cable clamp, cable stop and related hardware are included with the winch. Read and understand installation steps before beginning installation.MODEL NUMBER 25-2290WINCH MOUNT INSTALLATION INSTRUCTIONS1. Remove the front bumper shroud.2. Install bracket and back plate (Items 2 & 3) to the location shown on the bumper. Do nottighten at this time as adjustment forward or backward may be required. (See image below )3

5. Wire the winch according to the manufacturer instructions.6. Route the winch cable through the roller fairlead and then install the roller fairlead to thewinch mount plate. (Depending on the style of fairlead and winch installed, you may berequired to insert the mounting bolts before the winch is installed.)7. Re-install the front bumper shroud.5

CAUTIONBE AWARE OF THE CABLE STOP CONTACTING THE ROLLERHAWSE WHEN THE CABLE IS WOUND IN.FAILURE TO RELEASE THE SWITCH MAY CAUSE DAMAGE TOWINCH PARTS OR TO THE ATV.When using the Winch to raise and lower a Cycle Country Plow, aCable Stop must be installed.Hook the Winch Cable to the CYC0345 (U608) (item #4 on your 15-0001 push tubekit) through the slotted hole. Carefully raise the blade until the top of the push tubeare no closer than 1” anywhere on the ATV. Place the Cable Stop onto the WinchCable up against the Winch Hawse. Secure the Cable Stop to the Winch Cable usingthe Cable Clamp Assembly as shown in the pictures below.6

One Year Limited WarrantyFor the period of one (1) year from the purchase date, Cycle Country (a Kolpin Powersports Brand) will replacefor the original purchaser, free of charge, any part or parts found upon examination by Cycle Countryto be defective in material, workmanship, or both.All transportation costs incurred submitting product to Cycle Country for warranty consideration must beborne by the purchaser. If Cycle Country determines that the product must be returned to the factory forcredit, please call 1-800-841-2222 for a Return Merchandise Authorization (RMA) number and shippinginstructions.This warranty does not apply to parts that have been damaged by accident, alteration, abuse, impropermaintenance, normal wear, or other causes beyond the manufacturer’s control. In order to protect you andyour ATV, certain parts of the plow system and/or hardware are designed to fail when the equipment isover-stressed.Peripheral products such as engines, electric motors, and actuators may carry an original manufacturer’swarranty. Please call Cycle Country for more information.7