0402 Series Thin Film Chip Resistors - Weltron Elektronik GmbH

WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.deCL Series Multilayer Chip InductorClimatic TestItem Requirements Test ConditionThermal ShockNo visible damageInductance variation within 10%Q variation within 20%Solder a test sample to printed circuit board, and conduct 100cycles of test under the conditions shown as below.Cycle:100/1hrWithin 2minHigh Humidity State Life TestHigh Humidity Load Life TestHigh Temperature State Life TestHigh Temperature LoadNo visible damage.Inductance variation within 10%.Q variation within 20%.No visible damage.Inductance variation within 10%.Q variation within 20%.No visible damage.Inductance variation within 10%.Q variation within 20%.No visible damage.Inductance variation within 10%.Q variation within 20%.-40/1hrKeep a test sample in an atmosphere with a temperature of70±2, 90~95%RH for 500±12 hours. After the test, keep thetest sample at a normal temperature for 1 to 2 hours, andthen carry out measurement.Solder a test sample to printed circuit board then keep thetest sample in an atmosphere with a temperature of 70±2,90~95%RH for 500±12 hours while supplying the ratedcurrent. After the test, keep the test sample at a normaltemperature for 1 to 2 hours, and then carry outmeasurement.Keep a test sample in an atmosphere with a temperature of100±2 for 500±12 hours. After the test, keep the testsample at a normal temperature for 1 to 2 hours, and thencarry out measurement.Solder a test sample to printed circuit board then keep thetest sample in an atmosphere with a temperature of 100±2for 500±12 hours while supplying the rated current. After thetest, keep the test sample at a normal temperature for 1 to 2hours, and then carry out measurement.Packaging SpecificationsReel DimensionsUnit: mmType A B C W TQuantity(EA)CL01 178±1 60.0±0.5 13.0±0.20 9.00±0.5 12.0±0.15 15,000CL02 178±1 60.0±0.5 13.0±0.20 9.00±0.5 12.0±0.15 10,000CL03 178±1 60.0±0.5 13.0±0.20 9.00±0.5 12.0±0.15 4,000Tape SpecificationsUnit: mmType A B T W P F K TapeCL01 0.38 0.68 0.42 8 2 3.5 - BCL02 0.65 1.12 0.60 8 2 3.5 - BCL03 1.10 1.80 0.95 8 4 3.5 - BType AType BWELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de