SES code marker cards SS EEE SSS --- MMM AAA RRR KKK EEE ...

Protective varnishfor SES code markersSES ® - MARKERSProperties :The film remaining after the solvents of the varnish have evaporated offers highadhesion, is odourless, flexible and perfectly transparent. It offers very goodresistance to abrasion, heat, light and damp.EZ varnish protects SES-MARKERS strips from dirt and it offers excellentresistance to esters (ethyl acetate), to ketones (acetone and methyl ethyl ketone),to solvents (trichlorethylene), to aromatic solvents (benzene and toluene), topetrol, oils and grease, water and diluted alkalis. It is not resistant to weak alcoholsolutions or acids.Instructions for use :EZ protecting varnish can be applied with a spray gun or a brush. Use the very softbrush in the lid to avoid mechanical damage of SES-MARKER printing. Thevarnish viscosity can be reduced by adding methanol, ethanol or butanol. EZprotective varnish is difficult to ignite. However, it is not to be used in the proximityof fire or an incandescent source, and working premises must be well ventilated.All safety regulations relative to solvent containing lacquers or flammable liquidsare to be respected when using EZ protective varnish.Type article Désignation packnumberSES-Markers 0706 0003 000 Protective varnish for SES-MARKERS 1 canVarnishin a can of 0,3 litrewith brush in the lidB1/10- 01IX/03B1/10 - 01