Open - Loctite

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 3You and Loctite ® >>THE perfect partnership For design,engineering and innovationWe are the world’s most trusted provider ofbonding, sealing and coating solutions.We enable innovative designs, improveproductivity and reduce cost for handhelddevices and displays.GlobalCapabilitiesWe are the global technologyleader with extensive networkto support customers’value chain.DesignPartnershipOur large experiencedteam of engineers providedocumented design andapplication support.Cost Saving& ReliabilityOur superior adhesivesand equipment improveproductivity, durability andreduce overall cost.Innovative& SustainableSolutionsWe enable customers’innovation to meet fast designchanges and developmentwith green solutions.Best-in-ClassTechnical SupportOur professional engineeringsupport empowers ourcustomers to improve theirquality and efficiency.www.loctite.com/hhdd

6 | Bonding, Sealing and Coating Solutions for Laptops & TabletsStructural Adhesivesfor Laptop1< C Cover< AdhesiveDispensing2< Bonding3Loctite ® Structural Adhesives provide tough, durablebonds for a wide range of materials (e.g. metals,plastics, glass and composites).

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 7Structural AdhesivesReach Compliant AdhesivesREACHCOMPLIANCEREACH stands for Registration, Evaluation, Authorizationand restriction of CHemicals. It is the European Communityregulation on chemicals and their safe use.Below is a selection of Loctite ® Structural Adhesives for handheld devices and displays.These products offer following key benefits in compliance with REACH.Additional Benefits• Eliminate costly mechanical fastening methods• Improve anesthetics compared to welds• Increase high temperature/humidity resistanceSelector GuideCharacteristics Loctite ® HF8000R Loctite ® HF8025R* Loctite ® HF8150R*Mix ratio (A : B) 10 : 1 10 : 1 10 : 1Viscosity before mix(cps, 25 °C)Part A: 20,000 - 40,000Part B: 10,000 - 20,000Part A: 160,000 - 250,000Part B: 20,000 - 50,000Part A: 50,000 - 80,000Part B: 10,000 - 20,000Work time 4 - 8 minutes 4 - 8 minutes 3 - 4 minutesCuring conditionHenkel dispensing equipmentRoom temperatureLoctite ® 400D Benchtop Robot (50 ml Dual Cartridge Dispenser)Storage temperature 2 - 8 °C* HF8025R / HF8150R: under development

8 | Bonding, Sealing and Coating Solutions for Laptops & TabletsStructural Adhesives2-Part Acrylic Adhesives> > 2-part acrylates> > Superior shear strength> > Excellent impact strength> > High temperature / humidity performance> > Fast fixture> > Halogen-freeLoctite ® Structural Adhesives help you optimize yourdesign, improve reliability & reduce assembly cost.Equipment Selector GuideLoctite ® 4530-HC Robot Dispensing SystemLoctite ® 400D 2-Part Acrylates Dispensing RobotSemi-automatic dispenser (1 : 1, 2 : 1, 10 : 1)Mix nozzleADV (anti-drip valve)NeedleHenkel dedicated technical service provides assembly solution on siteto improve your product & productivity.• Design specification and testing• Process set up and optimization• Application equipment and system integrationSelector GuideCharacteristics Loctite ® HF8000 Loctite ® HF8025 Loctite ® HF8600 Loctite ® HF8800 Loctite ® HF8075LVMix ratio (A : B) 10 : 1 10 : 1 2 : 1 2 : 1 10 : 1Shear strength of An.AI(psi, 24 H @ RT)Viscosity before mix (cps, 25 °C)2,800(steel)Part A: 160,000 - 250,000Part B: 20,000 - 50,0002,800(steel)2,120(steel)Part A: 19,200Part B: 15,2002,936(cured 20 min @ 80°Cplus 24 H @ RT)Part A: 28,130Part B: 16,0352,100(steel)Part A: 70,000 - 100,000Part B: 50,000 - 70,000Working time 4 - 8 minutes 2 - 4 minutes > 5 minutes 2 - 4 minutesStorage temperature 2 - 8 °C 8 - 25 °CCuring conditionLoctite ® dispensing equipmentRoom temperatureLoctite ® 4530-HC Robot Dispensing SystemLoctite ® 400D Benchtop Robot (50 ml Dual Cartridge Dispenser)

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 9Fast Fixture Loctite ® HF8150RCharacteristicsLoctite ® HF8150RMix ratio (A : B) 10 : 1Viscosity before mix (cps, 25 °C)Mixed: 60,000 @ 20 rpmWorking time4 minutesCuring conditionRoom temperatureLoctite ® HF8150R is halogen-free 2-part MMAdesigned for laptop bonding. It has beenspecifically formulated to deliver fast fixture,excellent adhesion and damp heat resistance toMg-Al, alloys, anodized Al and PCABS.Henkel dispensing equipmentLoctite ® 400D Benchtop Robot(50 ml Dual Cartridge Dispenser)Storage temperature 2 - 8 °CLap-Shear Strength30252015Before Aging105

10 | Bonding, Sealing and Coating Solutions for Laptops & TabletsStructural Adhesives2-Part PU Adhesives> > 2-part polyurethane> > Superior flexibility> > Excellent impact strength> > Excellent shear strength> > High temperature / humidity performance> > Fast fixture> > Halogen-freeCompetitorLight SourceLoctite ® HF6005Light SourceLoctite ® HF6005 is a two-component urethane designed forlow modulus & high impact resistance. Once mixed, it curesat room temperature or can be accelerated via heat.Selector GuideCharacteristicsLoctite ® HF6005Mix ratio (A : B) 1 : 2Viscosity before mix (cps, 25 °C)Working timePart A (resin): 300 - 1,100Part B (hardener): 90,000 - 215,0004 minutesCuring condition Room temperature or 80 °CLap shear strength (IXEF, psi) 700Side impact (IXEF, J) 9.2Storage temperature 21 - 28 °C

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 11Instant AdhesivesHalogen-free*Instant AdhesivesGeneralPurposeLight Cure Toughened Low Odor / Low BloomLoctite ® Product HF382 HF4305 1 HF4307 1 435 1 438 1 HF480 HF403 HF460FeaturesPlastics• Highperformancewire tacking 2• Rubber, plasticand metalbonding• Halogen-free*• Light (UV / visible)and moisture curemechanism• Fast cure with UVminimizes blooming• Rubber, plastic andmetal bonding• Halogen-free*• Light (UV / visible)and moisture curemechanism• Fast cure with UVminimizes blooming• Positive under UVlight• Rubber, plastic andmetal bonding• Halogen-free*• Surfaceinsensitive• Hightemperatureresistant• Rubber, plasticand metalbonding• Surfaceinsensitive• Hightemperatureresistant• Rubber, plasticand metalbonding• Surfaceinsensitive• Hightemperatureresistant• Rubber, plasticand metalbonding• Halogen-free*• Surfaceinsensitive• Rubber, plasticand metalbonding• Halogen-free*• Surfaceinsensitive• Low viscosityfor close-fittingparts• Rubber, plasticand metalbonding• Halogen-free*SubstrateElastomersMetalsAcidic Surfaces3PolyolefinsColor Clear Clear / pale green Clear / pale green Clear Black Black Clear ClearViscosity High Medium Medium Low Low Low High LowTypical PropertiesMax Gap Fill (mm) 0.20 0.20 0.20 0.15 0.15 0.15 0.20 0.10Chemical Type Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Alkoxy AlkoxyViscosity (cP) 5,000 900 900 200 200 200 1,200 45Shear Strength (psi) 4 3,200 2,000 5 2,000 52,700 2,800 3,800 2,600 2,600Temperature Range (°C) -54 to 99 -40 to 80 -40 to 80 -54 to 107 -54 to 107 -54 to 82 -54 to 99 -54 to 99Fixture Speed (s) 630 < 5 < 5 30 30 90 50 50OrderingInfoItem Number 1653293 1675272 1675285 871787 871819 1658082 1659527 1659525Package Type / Size 20 g bottle 20 g bottle 20 g bottle 20 g bottle 20 g bottle 20 g bottle 20 g bottle 20 g bottleLEGEND= Good= Very Good= Good in Combination with Loctite ® 770 Primer1 Halogen-free* compliance available on request2 In combination with Loctite ® 712 or 7452 Accelerator3 Accelerator required4 For grit-blasted steel5 For polycarbonate6 Full cure = 24 hours without UV / VIS exposure; with UV / VIS exposure, see technical datasheets Fixture speed varies by substrate, gap and humidityProducts specifically designed to meet the halogen-free* specification.* Products whose halogen content has not been tested on a batch to batch basis. As batch variationsexist, some batches may therefore exceed the specified limits as set out under halogen-free definition.Henkel shall not be liable for any and all consequences (direct or consequential) resulting from (i) theabsence of test with regard to the halogen content or (ii) the products halogen content exceeding thespecified limits or (iii) batch to batch variations of the product.PLEASE NOTE: A complete line of surface primers, accelerators and cleaners is available tofurther enhance the performance of Loctite ® Instant Adhesives.The above information is presented as a guideline only. Henkel recommends evaluating the selected product in your application to determine suitability.Henkel shall not be liable for any and all inaccuracy or omission which may exist in the actual test data generated by the foregoing aforementioned third party laboratory.

12 | Bonding, Sealing and Coating Solutions for Laptops & TabletsStructural AdhesivesPUR Hotmelt Adhesives> > One-part, solvent free> > Good adhesion to plastic, metal, glass and composite> > Fast fixturing> > Very thin bondlines> > Long open time> > Low cost> > Wide variety of formulations availableLower overall assembly costwith improved productivityand yield.< Loctite® 400D BenchtopRobot Dispense SystemLoctite ® Adhesives Compared to PSA TapeCharacteristics Loctite ® PUR Hotmelts Loctite ® Cyanoacrylates PSA TapeBond very thin joints Yes, bonds > 0.4 mm May flow beyond bond areaCan’t bond very thin joints because of die-cutting design limitation,insufficient strengthStrength of bonding plastic Very strong Quite strong but can crack Weak bond, especially in very small areaFills gap caused by partsvariationYes, liquid fills gap easily Yes, liquid fills gap easily No, tape does not fill these gapsAppearance of bonded edges Very good Good GoodComplete seal Yes Yes Difficult, depend on design and parts toleranceBonding curved surfaces Yes Yes NoTotal applied cost Low Low High (die-cutting cost)Selector GuideCharacteristics Loctite ® 3541 Loctite ® 3542 Loctite ® 3572 Loctite ® 3573 Loctite ® 3580 Loctite ® ME3570Bond strengthPlastic to plastic Very high High High High High Very highPlastic to metal High Very high High High High Very highPlastic to glass Moderate Very high Very high Very high High HighMetal to glass Moderate Very high Very high Very high High HighGap fill Medium Medium High High High HighSpeed of dispense / flow rate Fast Fast Fast Fast Medium MediumFixture time * 1 - 2 minutes 1 - 2 minutes - - - -Open time * 1 - 2 minutes 2 - 4 minutes > 4 minutes > 4 minutes UV Control > 4 minutesBead sizeThin* Fixture time and open time: vary upon the operating environment conditions; high temperatures will lengthen open times, while lower temperatureswill shorten open time, and low humidity condition may extend fix time.

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 13Structural AdhesivesUV Pre-activatedPUR Hotmelt Adhesives1Dispensing as standardPUR Hotmelt AdhesivesUV Pre-activatedPUR Hotmelt Adhesives2 3UV exposure toactivate adhesiveLight SourceAssemble parts at a later timeAchieve initial strength quicklyKey Feature – Fast Curing ProfileComparison between Loctite ® 3580 and Loctite ® 35422.51.221Strength (MPa)1.51Strength (MPa)0.80.60.4Loctite ® 3580Loctite ® 35420.500.200 300 600 900 1200 1500 0 10 20 30 40 50 60Time (minutes)Time (minutes)* SS + Glass** Bonding strength measuredcross-bead push test• Curing behavior is much changed due to UV activation• Much higher initial strength than standard PUR Hotmelt Adhesives• Final bonding strength is quite similarRecommended Operation Conditions• UV Lamps type: UVA LED Flood System• UV light wavelength: UVA 375 nm• UV intensity: 25 - 75 mW/cm 2• Open time suggestion: no longer than 2 minutes for both before & after UV curing (as shorter as good)• Assembling tips: UV curing before bonding, curing time: 10 - 60 seconds• SOP will be released soon

14 | Bonding, Sealing and Coating Solutions for Laptops & TabletsOvermoldingAdhesivesOvermolding adhesives are primers or adhesion promoters used toenhance adhesion between multiple substrates during co-molding orinsert molding process.• The method replaces traditional assembly process to achieve a morecompact, light, seamless and elegant design.• Loctite ® overmolding adhesives can help to increase the adhesion strengthof the injected material to the parts surface.• Typical materials that can be processed are anodized aluminum, steel, TPU,certain plastics and glass surface.Selector GuideCharacteristics Loctite ® OM4501 Loctite ® OM4101 Loctite ® OM8200Vehicle Solvent based polyurethane Water based urethane Water based polyurethaneSolid content 50 ± 2% 40% 30 - 32%Color Clear to turbid, yellow to brown (to reddish) White WhiteViscosity(RVT #3 @ 20 rpm @ 25 °C)90 - 350 m·Pas(Brookfield LVT, spindle 2, 30 rpm at 20 °C)Remark 1 component 1 component2,100 cPs 10 - 15 cPsOM8200 can be used with OM5887 toenhance the aging resistance after cured.Mixing ratio 20 : 1 by weight

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 15Liquid Optically Clear AdhesivesTouch Panel Sensor AssemblyEnhance displays with superior performanceand easy processability.Key Benefits• Improving the viewing experienceWith LOCA and A/R glass you can increase contrast ratioby 400% in sunlight. Henkel has minimized loss due toreflection by matching the refractive index (1.5) to glass andPMMA.• Increasing display ruggednessFor large gaps up to 1 mm, you can increase the falling ballimpact resistance by up to 3X.• Extending battery lifeBy reducing light loss due to reflection, the end user can geta superior viewing experience with less power consumptiongreatly extending battery life.• Extending display product lifeLOCA makes a display more durable to heat, moisture andtemperature cycling.• Enabling thinner designsLOCA will absorb the impact of a given load when comparedto an assembly with an air gap, allowing for thinner designswhile protecting the display surface.Cover Lens BondingTouch Panel SensorAssemblyDirect BondingCover LensPlastic / GlassLOCAITOPlastic / GlassLOCAITOPlastic / GlassLOCALCDModule

16 | Bonding, Sealing and Coating Solutions for Laptops & TabletsEquipment Selector GuideAcrylic AdhesivesHand HeldDesiredApplicationMethodManualPneumatic50 ml 200 ml/400ml 50 ml 200 ml 400 mlSolutionDispensePatternViscosityRange98472 1372751 97042 983437 983439/985249Loctite ® 50 ml DualCartridge Manual ApplicatorLoctite ® Universal ManualDispenser for200 ml/400 ml CartridgesLoctite ® 50 ml DualCartridge Pneumatic ApplicatorLoctite ® 200 ml DualCartridge Pneumatic ApplicatorDot, Bead Dot, Bead Dot, Bead Dot, Bead Dot, BeadLow - High High - Paste Low - High High - Paste High - PasteLoctite ® 400 ml DualCartridge Pneumatic ApplicatorDispensingCapabilityTwo-ComponentEpoxies, Urethanes,MethacrylatesTwo-ComponentEpoxies, Urethanes,MethacrylatesTwo-ComponentEpoxies, Urethanes,MethacrylatesTwo-ComponentEpoxies, Urethanes,MethacrylatesTwo-ComponentEpoxies, Urethanes,MethacrylatesPackageTypes & Sizes50 ml Dual Cartridge200 ml and 400 mlDual Cartridge50 ml Dual Cartridge 200 ml Dual Cartridge 400 ml Dual CartridgeFeatures• Provides a convenient, costeffectivemethod to applyproduct with minimal waste• Compatible with 1 : 1 and1 : 2 mix ratio products• 983533 - Replacement Plunger,1 : 1 Ratio• 983534 - Replacement Plunger,2 : 1 Ratio• 984209 - Optional Plunger,4 : 1 Ratio• 986086 - Optional Plunger,10 : 1 Ratio• Accepts 200 ml and 400 mltwo-component cartridges• Mix ratios of 1 : 1, 2 : 1,4 : 1 and 10 : 1• Interchangeable plungerbuttons allow application of allmix ratios• Dispenses low, medium andhigh viscosity materials• Lightweight, well balanceddesign for easy use• Pneumatic assist assuresreduced operator fatigue andconsistent adhesive application• Integrated air pressure regulator• Conveniently positionedthumb wheel with 5 pressureadjustments to controldispense rate• Quick acting trigger insuresprecise bead control andminimizes product waste• Versatile cartridge holderaccepts dual 50 ml cartridgeswith 1 : 1, 2 : 1 and 10 : 1 ratios• Ideally suited for production lineapplications, these applicatorsprovide a convenient, costeffectivemethod for applyingproduct with minimal waste• The adjustable dispense rate isset via the integral air pressureregulator• Available for 1 : 1, 2 : 1 mix ratioproducts• Ideally suited for production lineapplications, these applicatorsprovide a convenient, costeffectivemethod for applyingproduct with minimal waste• The adjustable dispense rate isset via the integral air pressureregulator• Available ratios:983439: 1 : 1, 2 : 1985249: 10 : 1For more information please contact us at: www.loctiteequipment.com or mail us at loctite.equipment@henkel.com.

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 17ManualHand HeldPneumaticLight Cure and Cyanoacrylate AdhesivesSemi - AutomaticDesiredApplicationMethod98026 1294304 97006 883976 1390321/1390322 98548Loctite ® 30 ml ManualSyringe ApplicatorLoctite ® Pneumatic Hand-Held Cartridge DispenserLoctite ® Precision SyringeDispensing SystemLoctite ® Digital SyringeDispensing SystemLoctite ® Integrated DispensingSystemDot, Bead Dot, Bead Dot, Bead Dot, Bead Dot, Bead Dot, BeadLow - High Medium - High Low - Paste Low - Paste Low - High 0 - 5,000 cPLoctite ® Benchtop PeristalticDispenserSolutionDispensePatternViscosityRangeAny Fluid in a 30 mlSyringe Including25 ml SyringesGel Cyanoacrylates,Anaerobic Gasketing,Thread Sealing,Light Cure / Acrylics, SiliconesGel Adhesives,Instant Adhesives,Light Cure / AcrylicsGel Adhesives,Instant Adhesives,Light Cure / AcrylicsCyanoacrylate,Anaerobic and UV AdhesivesInstant Adhesives,Light Cure / Acrylics,Retaining Compounds,ThreadlockersDispensingCapability30 ml Syringe300 ml Cartridge/250 ml Tube(Used with Tube Adapter)3 ml/5 ml/10 ml/30 ml/55 ml Syringe3 ml/5 ml/10 ml/30 ml/55 ml Syringe250 ml/500 g/1 Litre/2 kg AnyPackageTypes & Sizes• Pistol configuration forease of application• Full-hand triggerminimizes operatorfatigue• Easy syringe loading• Smooth dispensing• Simple, quick operation• Built-in air pressureregulator allows foreasy adjustment toaccommodate variousproduct viscosities• Rotating air hose fittingwith quick disconnectfitting included• Instant dump valve forpressure relief• Drawn aluminum barrel• Quick release end cap• For use with 250 ml tubes,order Loctite ® 250 mlSqueeze Tube Adapter989347• Precision air pressureregulator for preciseapplication of small dots• Precise digital display ofdispense pressure, 0 to100 psi• Digital timer display, forprecise timer settings• Vacuum suck-backfeature to preventdripping and stringing• “Stand-up” design,requires minimal benchspace• Detects ± 10% variationfrom set pressure andalerts operator if detected• Vacuum suck-backcan effectively controlproduct dripping orstringing• Manual, Incremental,and Timed modes allowa choice of adhesivedispensing methods• Convenient “teachmode” to set timerequired for desireddispense amount orvolume• Cycle counter is clearlydisplayed in the LCDscreen• The unit can beintegrated intocustomer’s PLCprogramming to initiatea dispense cycle• Units can be stackedsecurely to saveworkspace• Integrated reservoir &controller design for simplesetup and space economy• Operates 1 or 2 dispensevalves, independently orsimultaneously• Equipped with precisionpressure regulator forreliable dispensing,eliminating air pressurefluctuations• 1390321: 0 - 7 bar,for medium to high viscosity1390322: 0 - 1 bar,for low viscosity• Timer-controlled solenoidvalve for air-actuation ofdispense valve• Level sensor to give emptywarning, visual & digital• Air-free dispensingeliminates air in product,avoiding prematureproduct clogging ofcyanoacrylates• Instant reverse for vacuumsuck-back that shuts off theflow of liquid and preventsdripping• Adjustable post-delay timefor vacuum setting• Simple and convenient loadmechanism provides foreasy tube changes• Continuous or timed modeof dispense• Large digital LED display• Includes four (4) differentfeed line tubing sizes toaccommodate variousproduct viscositiesFeatures

18 | Bonding, Sealing and Coating Solutions for Laptops & TabletsProduct Selector ChartLoctite ®productProductfamilyAppearance Mix ratio Viscosity FixturetimeShear strength Max temp.Color Resin : Hardener cP psi (N/mm²) ºF (ºC)Products specifically designed to meet the halogen-free* specification. Each batch is tested to confirm halogen-free* compliance.3261 2-step AcrylicTransparent yellow tolight amber1 Component + Primer 7,500 < 15 seconds 1,450 (10.0) 230 (110)3662 2-step AcrylicTransparent yellow tolight amber1 Component + Primer 9,000 < 15 seconds > 1,500 (10.3) N/A3351 Acrylate Optical clear 1 Component 1,0005 seconds@ 100 mW/cm 2 1.1 Mpa (Tensile strength) N/AHF8075LV Acrylate Green 10 : 1Part A: 70,000 - 100,000Part B: 50,000 - 70,00060 seconds 2,038 (14.1) 251.6 (122)Acrylate Silicone10 seconds5121Optical clear 1 Component 4,300Hybrid@ 100 mW/cm 2 > 2.5 Mpa (Tensile strength) N/AAcrylate Silicone10 seconds5122Optical clear 1 Component 3,000Hybrid@ 100 mW/cm 2 > 2.5 Mpa (Tensile strength) N/A6485 Anaerobic Green 1 Component + Primer 525 5 minutes 3,300 (22.8) 350 (177)HF382 Cyanoacrylic Clear 1 Component 5,000 30 seconds 3,200 (22.1) 180 (82)HF403 Cyanoacrylic Clear 1 Component 1,200 50 seconds 2,600 (17.9) 180 (82)HF460 Cyanoacrylic Clear 1 Component 45 50 seconds 2,600 (17.9) 180 (82)HF480 Cyanoacrylic Black 1 Component 200 90 seconds 3,800 (26.2) 180 (82)HDD210294B Epoxy Green (mixed) 2 : 1 6,000 30 minutes 2,500 (17.2) 266 (130)3987 Heat Cure Epoxy Grey 1 Component 87,000 30 minutes @ 170 °C 3,300 (22.8) 390 (199)Light CureHF4305CyanoacrylateClear to pale green 1 Component 900 < 5 seconds 1,480 (10.2) 240 (116)Light CureHF4307CyanoacrylateClear to pale green 1 Component 900 < 5 seconds 1,480 (10.2) 240 (116)HF8150R Methacrylate Green 10 : 1 60,000 (Mixed) 60 seconds 3,800 (26.2) on An-Al to Mg-Al N/AHF8000 Methyl Methacrylate Green 10 : 1 N/A 5 - 10 minutes 2,912 (20.0) 230 - 300.2 (110 - 149)HF8000R Methyl Methacrylate Green 10 : 1 N/A 5 - 10 minutes 2,912 (20.0) 230 - 300.2 (110 - 149)HF8025 Methyl Methacrylate Green 10 : 1Part A: 160,000 - 250,000Part B: 20,000 - 50,00025 - 30 minutes 3,590 (24.8) 230 - 300.2 (110 - 149)HF8025R Methyl Methacrylate Green 10 : 1Part A: 160,000 - 250,000Part B: 20,000 - 50,00025 - 30 minutes 3,590 (24.8) 230 - 300.2 (110 - 149)HF8600 Methyl Methacrylate Light blue 2 : 1Part A: 15,000 - 30,000Part B: 15,000 - 30,0005 - 10 minutes 1,500 (10.3) 225 (107)HF8800 Methyl Methacrylate Light blue 2 : 1Part A: 18,000 - 40,000Part B: 18,000 - 40,0005 - 10 minutes 1810 (12.5) 225 (107)HF6005 Polyurethane Light Blue 1 : 2Part A: 300 - 1,100Part B: 90,000 - 215,0005 - 10 minutes 700 (4.8) N/A3541354235723573ME3570PolyurethaneHotmeltPolyurethaneHotmeltPolyurethaneHotmeltPolyurethaneHotmeltPolyurethaneHotmeltTransparent when molten,light ivory after coolingTransparent when molten,light ivory after coolingTransparent when molten,light ivory after coolingBlackTransparent when molten,light ivory after cooling1 Component1 Component1 Component1 Component1 Component11,000 ± 1,500 mPa·s@ 110 °C4,000 - 7,000 mPa·s@ 100 °C4,000 - 7,000 mPa·s@ 101 °C4,000 - 7,000 mPa·s@ 101 °C4,000 - 7,000 mPa·s@ 100 °C3193HS UV Acrylic Optical clear 1 Component 4,600 - 6,8003195 UV Acrylic Optical clear 1 Component 3,000 - 4,0003195DM UV Acrylic Optical clear 1 Component 38,000 - 44,0003196 UV Acrylic Optical clear 1 Component 3,200 - 4,200N/A1.3 Mpa (Cross Pull Test, PC + PC,Curing 24 Hours, 23 ± 5 °C and50% ± 5% RH)N/A0.8 Mpa (Cross Pull Test,N/ASS + Glass, Curing 24 Hours, N/A23 ± 5 °C and 50% ± 5% RH)1.5 Mpa (Cross Pull Test, PCABS +N/APMMA, Curing 24 Hours, N/A23 ± 5 °C and 50% ± 7% RH)1.5 Mpa (Cross Pull Test, PCABS +N/APMMA, Curing 24 Hours, N/A23 ± 5 °C and 50% ± 7% RH)1.6 Mpa (Cross Pull Test, PCABS +N/APMMA, Curing 24 Hours, N/A23 ± 5 °C and 50% ± 5% RH)< 5 seconds@ 70 mW/cm 2 > 0.5 Mpa (Tensile strength) N/A< 5 seconds@ 70 mW/cm 2 > 0.5 Mpa (Tensile strength) N/A< 10 seconds@ 70 mW/cm 2 > 0.2 Mpa (Tensile strength) N/A< 5 seconds@ 70 mW/cm 2 > 0.2 Mpa (Tensile strength) N/A

Bonding, Sealing and Coating Solutions for Laptops & Tablets | 19Loctite ®productProductfamilyAppearance Mix ratio Viscosity FixturetimeShear strength Max temp.Color Resin : Hardener cP psi (N/mm²) ºF (ºC)Products specifically designed to meet the halogen-free* specification. Each batch is tested to confirm halogen-free* compliance.3344 UV Cure Epoxy Straw 1 Component 17,500 < 3 seconds N/A 390 (199)3580UV Pre-activePolyurethaneHotmeltTransparent when molten,light ivory after cooling1 Component4,000 - 7,000 mPa·s@ 100 °C5192DM UV Silicone Optical clear 1 Component 40,000 - 60,0005192UV / Moisture CureSiliconeOptical clear 1 Component 4,0003192 UV / Thermal Acrylic Optical clear 1 Component 4,000 - 5,000General product line. Individual batch halogen-free* compliance available on request.N/A2.5 Mpa (Cross Pull Test, PCABS +PMMA, Curing 24 Hours,23 ± 5 °C and 50% ± 6% RH)N/A< 30 seconds@ 70 mW/cm 2 > 0.2 Mpa (Tensile strength) N/A< 30 seconds@ 70 mW/cm 2 > 0.4 Mpa (Tensile strength) N/A< 5 seconds@ 70 mW/cm 2 > 0.5 Mpa (Tensile strength) N/A3050 2-step Acrylic Yellow 2 : 1 75,000 17 minutes 2,900 (20.0) 400 (204)331 2-step Acrylic Cream 1 Component + Activator 20,000 20 seconds 3,100 (21.4) 350 (177)401 / 770 Cyanoacrylic Colorless to straw 1 Component 110 15 seconds 3,200 (22.1) 180 (82)420 Cyanoacrylic Clear 1 Component 2 20 seconds 2,900 (20.0) 180 (82)435 Cyanoacrylic Clear 1 Component 200 30 seconds 2,700 (18.6) 240 (116)438 Cyanoacrylic Black 1 Component 200 30 seconds 2,800 (19.3) 240 (116)454 Cyanoacrylic Clear 1 Component Gel 15 seconds 3,200 (22.1) 180 (82)480 Cyanoacrylic Black 1 Component 200 90 seconds 3,800 (26.2) 180 (82)Hotmelt ReactiveR-513CUrethaneCream 1 Component 15,000 @ 120 °C 5 minutes 900 (6.2) 250 (121)Light Cure4305CyanoacrylateClear to pale green 1 Component 900 < 5 seconds 1,480 (10.2) 240 (116)Light Cure4307CyanoacrylateClear to pale green 1 Component 900 < 5 seconds 1,480 (10.2) 240 (116)5055 Silicone Light yellow, transparent 1 Component 350 < 30 seconds 795 (5.5) N/A (High)5056 Silicone Light yellow, transparent 1 Component 1,800 < 30 seconds 900 (6.2) N/A (High)5623 Silicone Ultra clear 2 Components 7001 hour @ 25 °C10 minutes @ 100 °CN/A 350 (177)U-09FL Urethane Clear 1 : 1 5,000 120 minutes 1,459 (10.1) 350 (177)363 UV Acrylic Clear to pale straw 1 Component 250 < 15 seconds 1,740 (12.0) 356 (180)3103 UV AcrylicTransparent to slightlyhazy1 Component 10,000 5 seconds 1,600 (11.0) 300 (149)3106 UV Acrylic Clear to pale straw 1 Component 5,000 < 5 seconds 3,392 (23.4) 300 (149)LEGENDREACH= = =* Ask for products designed specifically to meet these standards.Products whose halogen content has not been tested on a batch to batch basis. As batch variations exist, some batches may therefore exceed the specified limits as set out under Halogen Free Definition, Henkelshall not be liable for any and all consequences (direct or consequential) resulting from (i) the absence of test with regard to the halogen content or (ii) the products halogen content exceeding the specified limitsor (iii) batch to batch variations of the product. Henkel offers halogen content certified batches on request.Henkel shall not be liable for any and all inaccuracy or omission which may exist in the actual test data generated by the foregoing aforementioned third party laboratory.

The data contained herein is intended as reference only. Some products / package sizes may not beavailable in your country or may have a lead time. Please contact your local Henkel subsidiary forassistance and recommendation on specifications and applications of these products.Contact us at: www.loctite.com/hhdd or mail us at: loctite.hhdd@henkel.com.Henkel Asia-Pacific &China HeadquartersNo. 928 Zhangheng RoadZhangjiang High-Tech ParkPudong New DistrictShanghai 201203, P.R. ChinaTel: +86-21-2891 8000Fax: +86-21-2891 8971Henkel (Malaysia) Sdn. Bhd.46/F, Menara TelekomJalan Pantai BahruKuala Lumpur 59200MalaysiaTel: +60-3-2246 1000Fax: +60-3-2246 1188Henkel CorporationOne Henkel WayRocky Hill, CT 06067United StatesTel: +1-800-571 5100Fax: +1-860-571 5465® All trademarks, exceptwhere otherwise noted, arethe properties of or used underlicense by Henkel Corporation.© Copyright 2012. HenkelCorporation. All rights reserved.APH-AG-022 (10/2012)Henkel AdhesivesTechnologies India Pvt. Ltd.11/F Kesar Solitaire Plot No. 5Sector 19 Palm Beach RoadSanpada, Navi MumbaiMaharashtra 400 705, IndiaTel: +91-22-3929 6600Fax: +91-22-3929 6602Henkel Singapore Pte Ltd.#03-01/02Haw Par Technocentre401 Commonwealth DriveSingapore 149598Tel: +65-6266 0100Fax: +65-6266 1161Henkel Canada Corporation2225 Meadowpine Blvd.Mississauga, Ontario L5n 7P2CanadaTel: +1-905-814 6511Fax: +1-905-814 5391Henkel Japan Ltd.27-7 Shin Isogo-choIsogo-ku, Yokohama-shiKanagawa 235-0017, JapanTel: +81-45-758 1800Fax: +81-45-758 1851Henkel Korea Ltd.8/F, Henkel Tower418 Mapo-dong, Mapo-guSeoul 121-734, South KoreaTel: +82-2-3279 1700Fax: +82-2-3273 4663Henkel Taiwan Ltd.10/F, 866 Zhongzheng RoadZhonghe DistrictNew Taipei City 235, TaiwanTel: +886-2-2227 1988Fax: +886-2-2226 8699Henkel (Thailand) Ltd.35/F, Centralworld Tower999/9 Rama 1 RoadKhwaeng PathumwanKhet PathumwanBangkok 10330, ThailandTel: +66-2-209 8000Fax: +66-2-209 8008Henkel AG & Co. KGaA(Headquarters)Henkelstraße 6740589 DüsseldorfGermanyTel: +49-211 7970Fax: +49-211 798 4008