All Load Data - Intoku.net

Introduction: the chicken or the egg?This is the era of immunology in canine dermatology.Canine atopic dermatitis is defined as “a genetically-predisposed inflammatory and pruriticallergic skin disease…most commonly associated with IgE antibodies to environmentalallergens” (Olivry et al., 2001). Derangements in immunological responses to allergens havebeen extensively studied in connection with their role in generating dermal inflammationand pruritus. By contrast, changes in the epidermal barrier that accompany inflammatorydermatoses have long been considered downstream participants in the disease pathogenesis.Consequently, specific or nonspecific anti-inflammatory therapy has been the focus of thetreatment of canine atopic dermatitis.The concept is emerging in human medicine that skin barrier abnormality is not just asecondary phenomenon, but rather a critical - if not primary - triggering factor in inflammatoryskin disease (Elias & Feingold, 2001). The outer layer of the epidermis (stratum corneum),the defense barrier between the outside world and the inside of the body, is not just an inertend product, but rather a sophisticated biosensor that responds to external perturbations.When the skin surface is injured or the skin barrier is compromised, a variety of signalsare produced (cytokines, growth factors, lipid mediators) that stimulate metabolic responsesin the underlying living epidermis. The responses are aimed at normalizing the stratumcorneum function. Over stimulation of this process stimulates signal cascades that initiateinflammatory events in deeper skin layers. The best-known example of this sequence isthe so-called cytokine cascade, which has been proposed to provoke or sustain severalimportant inflammatory dermatoses. According to this new outside-inside paradigm, it isthe faulty barrier that drives and sustains inflammation in underlying skin layers.It seems reasonable to think that both primary epidermal barrier dysfunction and inappropriateimmunologic response contribute to the full expression of atopic dermatitis in dogs. Therefore,therapies aimed at normalizing epidermal barrier function should not be seen as secondaryor inconsequential, and management of allergic skin disease should consider treatment ofinflammation along with selection of an appropriate barrier repair strategy.This very good idea has driven the development of a new topical lipid replacement therapyby Virbac Animal Health. We invite you to discover the Allerderm ® Spot On in the followingpages.Christophe A. Rème, DVMHugues Gatto, PhDMedical DepartmentVirbac SANancy Bathurst, DVMResearch & DevelopmentVirbac Corporationintroduction

10 mm Load DataJHP!175grLRN!175grLRN!175grLRN!175grLRN!175grLSWC!180grjhp!180grjhp!180grJHP!180grJHP!180grXTP-HP!180grJHP!180grJHP!180grJHC!180grJHC!180grXTP!Pressure: 29,500 PSI6.7 gr No. 2 1,167 fps 1.245" CCI 300 AccurateSuggested starting load: 6.0 gr8.3 gr No. 5 1,166 fps 1.245" CCI 300 AccurateSuggested starting load: 7.5 gr10.4 gr No. 7 1,199 fps 1.245" CCI 300 AccurateSuggested starting load: 9.4 gr13.6 gr No. 9 1,285 fps 1.245" CCI 300 AccurateSuggested starting load: 12.2 gr6.0 gr Unique Unknown 1.270" Win LP guestUse taper crimp to ensure function in automatics. Fired in Colt Delta Elite and Smith & Wesson1006.12.0 gr #7 1,200 fps win guest12.7 gr #7 Unknown win guest12.9 gr 2400 1,210 fps 1.25" Fed 150 AlliantSuggested starting load: 11.6 grPressure: 36,00012.5 gr accurate # 7 1,300 fps 1.250" Win LP guestUsed only new winchester brass,have fired over 400 rounds no real pressure signs.Delta Elitewas used for testing 1.75 inch groups @ 25 yards. I have killed a couple deer with this load bothclean kills.I would like to get some feedback on this load Thank you Lane.Email author: schippermomSee all of schippermom's loadsAlliant10.9 gr1,350 fps 1.325" WLP guestPower PistolThis load was developed in a S&W M-610 REVOLVER and is NOT INTENDED FOR USE IN ANYSEMI-AUTO PISTOLS! Should you decide to use this data, you accept full responsibility andshould note the OAL is over the length set by SAAMI. This is a quite accurate load in the twoSmith & Wesson Model 610 revolvers in which I have used to develop the load. With 6 1/2"barrel and 2X Burris scope, average group size is under 1 1/2". With factory iron sights, thisload goes under 3". Distance is 50 yds., and all groups were fired from a sand bag rest. This loadis quite capable as a hunting load for white tail deer and similar size game.Email author: wheelgunSee all of wheelgun's loads10.4 gr Blue Dot 1,220 fps 1.25" Fed 150 AlliantSuggested starting load: 9.4 grPressure: 35,8006.4 gr Bullseye 1,125 fps 1.25" Fed 150 AlliantSuggested starting load: 5.8 grPressure: 35,9005.8 gr HP38 1,061 fps 1.26" WLP HodgdonSuggested starting load: 5.2 grPressure: 34,900 PSI9.4 gr HS6 1,127 fps 1.26" WLP HodgdonSuggested starting load: 8.5 grPressure: 35,800 PSI6.8 gr No. 2 1,120 fps 1.25" CCI 300 AccurateSuggested starting load: 6.1 gr06/10/2004 07:068.7 gr No. 5 1,197 fps 1.25" CCI 300 Accuratehttp://www.handloads.com/loaddata/default.asp?Caliber=10%20mm&Weight=All&type=HandgunPage 4 of 8

10 mm Load Data06/10/2004 07:06180grXTP!180grXTP!180grXTP!180grJHP!180grLFP!180grJHC!180grJHP!180grJHC!180grHP!180grHP!180grHP!180grJHP!180grJHP!180grJHP!190grJFP!190grJFP!190grJFP!Suggested starting load: 7.8 gr10.7 gr No. 7 1,183 fps 1.25" CCI 300 AccurateSuggested starting load: 9.6 gr13.5 gr No. 9 1,242 fps 1.25" CCI 300 AccurateSuggested starting load: 12.2 gr8.7 gr Power Pistol 1,240 fps 1.25" Fed 150 AlliantSuggested starting load: 7.8 grPressure: 34,9008.7 gr Power Pistol 1,235 fps 1.25" Fed 150 AlliantSuggested starting load: 7.8 grPressure: 34,7006.0 gr TiteGroup 1,141 fps 1.26" WLP HodgdonSuggested starting load: 5.4 grPressure: 34,300 PSI7.0 gr Unique 1,125 fps 1.25" Fed 150 AlliantSuggested starting load: 6.3 grPressure: 35,7006.4 gr Universal 1,122 fps 1.26" WLP HodgdonSuggested starting load: 5.8 grPressure: 32,200 PSI7.9 gr VV 3N37 1,212 fps 1.256" VihtavuoriSuggested starting load: 7.1 gr6.9 gr VV N340 1,167 fps 1.256" VihtavuoriSuggested starting load: 6.2 gr7.4 gr VV N350 1,195 fps 1.256" VihtavuoriSuggested starting load: 6.7 gr5.8 gr Win 231 1,050 fps WinchesterSuggested starting load: 5.2 grPressure: 35,600 PSI7.1 gr WSF 1,150 fps WinchesterSuggested starting load: 6.4 grPressure: 35,600 PSI5.5 gr WST 1,010 fps WinchesterSuggested starting load: 5.0 grPressure: 35,200 PSI12.5 gr 2400 1,195 fps 1.25" Fed 150 AlliantSuggested starting load: 11.3 grPressure: 35,80010.0 gr Blue Dot 1,185 fps 1.25" Fed 150 AlliantSuggested starting load: 9.0 grPressure: 36,0006.3 gr Bullseye 1,050 fps 1.25" Fed 150 AlliantSuggested starting load: 5.7 grPressure: 35,500http://www.handloads.com/loaddata/default.asp?Caliber=10%20mm&Weight=All&type=HandgunPage 5 of 8

10 mm Load Data190grFMJ!190grFMJ!190grFMJ!190grFMJ!190grJFP!190grJFP!190grFMJ!190grFMJ!20grwax!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grXTP!200grXTP!200grXTP!7.2 gr No. 2 1,126 fps 1.25" CCI 300 AccurateSuggested starting load: 6.5 gr9.1 gr No. 5 1,186 fps 1.25" CCI 300 AccurateSuggested starting load: 8.2 gr11.2 gr No. 7 1,198 fps 1.25" CCI 300 AccurateSuggested starting load: 10.1 gr14.2 gr No. 9 1,267 fps 1.25" CCI 300 AccurateSuggested starting load: 12.8 gr8.2 gr Power Pistol 1,200 fps 1.25" Fed 150 AlliantSuggested starting load: 7.4 grPressure: 35,9006.7 gr Unique 1,025 fps 1.25" Fed 150 AlliantSuggested starting load: 6.0 grPressure: 35,5005.9 gr Win 231 1,030 fps WinchesterSuggested starting load: 5.3 grPressure: 35,600 PSI7.1 gr WSF 1,120 fps WinchesterSuggested starting load: 6.4 grPressure: 35,600 PSI0.0 gr NA 450 fps .99" CCI300 guestReload by pushing the case mouth first into/through the wax before priming. Wax temp shouldbe about 105 degrees F. High velocity out of a 6inch bbl: 585fps. Low velocity:340fps due toslug shatter. Wax loads are a fun way to use old cases; drill out primer flash hole to about 0.10inch to prevent primer pushback.11.2 gr 2400 1,115 fps 1.26" Fed 150 AlliantSuggested starting load: 10.1 grPressure: 34,1008.9 gr Blue Dot 1,110 fps 1.26" Fed 150 AlliantSuggested starting load: 8.0 grPressure: 33,8005.3 gr Bullseye 940 fps 1.26" Fed 150 AlliantSuggested starting load: 4.8 grPressure: 33,6005.6 gr HP38 1,011 fps 1.26" WLP HodgdonSuggested starting load: 5.0 grPressure: 35,700 PSI8.6 gr HS6 1,089 fps 1.26" WLP HodgdonSuggested starting load: 7.7 grPressure: 35,900 PSI6.3 gr No. 2 1,041 fps 1.25" CCI 300 AccurateSuggested starting load: 5.7 gr7.8 gr No. 5 1,066 fps 1.25" CCI 300 AccurateSuggested starting load: 7.0 gr9.8 gr No. 7 1,091 fps 1.25" CCI 300 AccurateSuggested starting load: 8.8 gr06/10/2004 07:06http://www.handloads.com/loaddata/default.asp?Caliber=10%20mm&Weight=All&type=HandgunPage 6 of 8

10 mm Load Data06/10/2004 07:06200grXTP!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grFMJ!200grLead!200grFMJ!200grLead!200grFMJ!200grLead!205grLRN!205grLRN!205grLRN!12.5 gr No. 9 1,170 fps 1.25" CCI 300 AccurateSuggested starting load: 11.3 gr7.7 gr Power Pistol 1,145 fps 1.26" Fed 150 AlliantSuggested starting load: 6.9 grPressure: 35,6005.3 gr TiteGroup 1,024 fps 1.26" WLP HodgdonSuggested starting load: 4.8 grPressure: 36,100 PSI5.8 gr Unique 940 fps 1.26" Fed 150 AlliantSuggested starting load: 5.2 grPressure: 33,7005.9 gr Universal 1,015 fps 1.26" WLP HodgdonSuggested starting load: 5.3 grPressure: 36,900 PSI6.9 gr VV 3N37 1,084 fps 1.256" VihtavuoriSuggested starting load: 6.2 gr8.6 gr VV N105 1,162 fps 1.256" VihtavuoriSuggested starting load: 7.7 gr5.8 gr VV N340 1,027 fps 1.256" VihtavuoriSuggested starting load: 5.2 gr6.4 gr VV N350 1,059 fps 1.256" VihtavuoriSuggested starting load: 5.8 gr5.5 gr Win 231 1,030 fps WinchesterSuggested starting load: 5.0 grPressure: 35,600 PSI5.6 gr Win 231 1,000 fps WinchesterSuggested starting load: 5.0 grPressure: 35,600 PSI6.3 gr WSF 1,080 fps WinchesterSuggested starting load: 5.7 grPressure: 35,600 PSI6.2 gr WSF 1,020 fps WinchesterSuggested starting load: 5.6 grPressure: 35,600 PSI5.0 gr WST 940 fps WinchesterSuggested starting load: 4.5 grPressure: 32,400 PSI5.2 gr No. 2 979 fps 1.25" CCI 300 AccurateSuggested starting load: 4.7 gr7.0 gr No. 5 1,063 fps 1.25" CCI 300 AccurateSuggested starting load: 6.3 gr9.3 gr No. 7 1,091 fps 1.25" CCI 300 AccurateSuggested starting load: 8.4 gr11.8 gr No. 9 1,157 fps 1.25" CCI 300 Accuratehttp://www.handloads.com/loaddata/default.asp?Caliber=10%20mm&Weight=All&type=HandgunPage 7 of 8

10 mm Load Data06/10/2004 07:06205grLRN!Suggested starting load: 10.6 grUsers assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses ordamages to persons or property (including consequential damages), arising from the use of any data, whether or notoccasioned by publisher's negligence or based on strict liability or principles of indemnity or contribution.Handloads.Com neither assumes nor authorizes any person to assume for it any liability in connection with the use ofany data.It took 0.17 seconds to build this pageQuestions or comments? | Donate to Handloads.Com | Advertise | Site Maphttp://www.handloads.com/loaddata/default.asp?Caliber=10%20mm&Weight=All&type=HandgunPage 8 of 8