Zerohal 100 - Simpson Donald

Zerohal 100GTypical propertiesTest Method Typical valueMax. operating temperature VG 95218-20, ASTM D 3032 125°C (20,000 h)Insulation shrinkage (160°C) DIN VDE 0472 Pt 628,< 0.5%IEC 811-1-3Low temperature bend VG 95218 - Pt 2 -55°CPressure test at hightemperatureHeat ageing (150°C, 6 h)(140°C, 120 h)DIN VDE 0472 Pt 609,IEC 811-3-1DIN VDE 0472 Pt 303,IEC 811-1-2125°C, < 30% indentationNo cracking, no dielectricbreakdownVoltage rating VG 95218-20 750/1300 V ACAbrasion resistance VG 95218 - Pt 2 PassInsulation blocking (125°C) VG 95218 - Pt 2 PassVoltage withstand(23°C, 2.5 kV rms)DIN VDE 0472 pt 509PassInsulation resistance DIN VDE 0472 pt 502,IEC 885-1Chemical resistanceGreaseVG 95218 - Pt 2, 70°C 24h(G-354)*Hydraulic fluidVG 95218 - Pt 2, 50°C 24h(H-515, H-544)*Brake fluidVG 95218 - Pt 2, 23°C 24h(H-542)*De-icing fluidVG 95218 - Pt 2, 23°C 24h(S-745)*> 500 M ohms. km (20°C)> 0.5 M ohms. km (90°C)< 5% diameter change,no dielectric breakdown< 5% diameter change,no dielectric breakdown< 5% diameter change,no dielectric breakdown< 5% diameter change,no dielectric breakdownMEK VG 95218 - Pt 2, 23°C 1h < 5% diameter change,no dielectric breakdown70/30 ISO-Octane/VG 95218 - Pt 2, 23°C 24hTolueneInsulationTensile strength DIN VDE 0472 pt 602,IEC 811-1-1Elongation at break DIN VDE 0472 pt 602,IEC 811-1-1< 5% diameter change,no dielectric breakdown> 20 MPa> 200%*NATO code.For further details please consult the German Standard VG 95218-20, Type E.Physical characteristicsHandleabilityZerohal 100G has been designed for minimum recoil during harnessing operations, to be readilyhandleable by modern wiring and harnessing techniques and to be easily stripped with standardequipment and tools.Environmental propertiesFluid resistanceZerohal 100G wire demonstrates anoutstanding balance of resistance to awide range of commonly used solvents,fluids and lubricants.Voltage ratingZerohal 100G wire is a 750/1300 V ACrated wire.