Premium CERTI-CRIMP Hand Tools

Premium CERTI-CRIMP Hand ToolsCatalog 65780Revised 4-98Product Facts■ Designed to exactingspecifications■ Ratchet control providescomplete crimping cycle■ For most military, UL andCSA applications■ Manufactured using thehighest quality materials■ Requires minimum skill■ Repairable■ Calibrated; recalibrationrecommended every6 months or 5 000 cycles■ Many SAHT and DAHTcrimping heads, and manydie sets, can be adaptedfor use with the 626Pneumatic Tool System(Request Catalog 124208)■ Produced under a QualityManagement System certifiedto ISO 9001A copy of thecertificate is availableupon request.Need more information?For information specificallyabout tooling, call the AMPTooling Assistance Center(TAC) at 1-800-722-1111.For drawings, technicaldata, or instant informationby the AMP FAX Service24 hours a day, call theAMP Product InformationCenter at 1-800-522-6752.©1993, 1994 and 1998 by AMPIncorporated. All Rights Reserved.AMP, AMP FAX, AMPLI-BOND,AMPLIMITE, AMPMODU,CERTI-CRIMP, COAXICON, FASTON,MATE-N-LOK, PIDG, PLASTI-GRIP,PLASTI-STRIP, SOLISTRAND, T-HEAD,and TETRA-CRIMP are trademarks.CERTI-CRIMP Hand Toolsare top-of-the-line, premium,hand-operated tools forcrimping a broad array ofterminals, contacts andspecial wiring devicesavailable from AMP. Theyare designed to exactingspecifications to produceconsistent, high-qualityterminations. A potentialservice life of over 50 000cycles is possible, dependingon operator care.AMP currently offers eightbasic styles ofCERTI-CRIMP Hand Tools.The choice depends on theproduct being appliedand/or your preferredmethod of application. Forexample, open barrel contactstypically requirestraight-action die movementto minimize possiblerotation during crimping.Or, if your applicationrequires crimping differentsizes of terminals, you mayprefer using a single toolwith a combination ofcrimping nests, rather thantwo or three separate tools.Other options includeinsulation crimp adjustmentfor different insulation thicknesses,a locator for properlypositioning and supportingthe terminal or contactin the tool, a wire stop,and color coding and/orwire size information on thehead of the tool or on thehandles.All CERTI-CRIMP HandTools feature the reliableratchet control. The ratchetis connected between bothhandles. It will not releaseuntil the handles are fullyclosed and the dies bottomed.This helps eliminatepartial crimps.CERTI-CRIMP Hand Toolsare well suited for low productionruns, prototypework, and repairs—almostany application requiringconsistent, highly-reliableterminations. Check appropriateAMP product catalogsfor qualification to militaryspecifications, ULrecognition and CSA certification.1For drawings or technical data, contact your AMP sales engineer, or call the AMP Tooling Assistance Center at 1-800-722-1111.Dimensions are in inches and millimeters unless otherwise specified.Specifications subject to change. Consult AMP for latest specifications.

Premium CERTI-CRIMP Hand ToolsCatalog 65780Revised 4-98Connector/Terminal to Tool Reference (Continued)Connector/TerminalStyleWire Range Max. Hand Tool Part Numbers Die Set forInsul. Dia.ToolAWG mm 2 in mm DAHT SADAHT TETRA-CRIMP T-HEAD HHHT FramePIDG FASTON 22-18 0.3-0.8 .100 2.54Receptacles Insulated 16-14 1.25-2 .170 4.32 — — 59824-1 — — —(6409oo P/N Series Only) 12-10 3-5 .250 6.35PIDG 26-22 0.12-0.3 .082 2.08 46121 — — 59275 — 69344 1Terminals and Splices,22-16 0.3-1.25 .125 3.18 47386 — 59824-1 59250 — 47806-2Insulated1PLASTI-GRIP 16-14 1.25-2 .150 3.81 47387 — 59824-1 59250 — 47807-1 1Terminals12-10 3-5 .230 5.84 — — 59824-1 — 59239-4 47808-6 1PLASTI-GRIPButt SplicesAMPLI-BONDTerminals,PLASTI-GRIPTerminals26-22 0.12-0.3 .080 2.03 46121 — — — — —Insulated 22-16 0.3-1.25 .170 4.32 45160 — — — — —16-14 1.25-2 .215 5.46 45575-1 — — — — —Insulated 8 7 .377 9.58 — — — — 69959 —PLASTI-STRIP 22-18 0.3-0.8 .135 3.43 — — — — — 58079-3 2Terminals,InsulatedUltra-Fast PlusFASTON Receptacles16-14 1.25-2 .160 4.06 — — — — — 58080-3 2Ultra-Fast FASTON22-18 0.3-0.8 .230 5.84 — — — — — 90390-3Insulated2Tabs and Receptacles 16-14 1.25-2 .260 6.60 — — — — — 90391-3 2SOLISTRANDTerminals and Splices22-16 0.3-1.25 — — 49935 — — — — 47812 1Uninsulated 16-14 1.25-2 — — 49935 — — — — 47813 112-10 3-5 — — 49935 — — — — —58 RG/U — — 220187-1 — — — — 220217-1 159 RG/U — — 220187-2 — — — — 220217-2 1Belden 8281 — — 220043-1 — — — — 220088-1 150-Ohm CommercialDual CrimpBNC/TNCConnectors 174 RG/U — — — 69245-1 — — — 6942250-Ohm Military1Single Crimp58 RG/U — — — 69140-1 — — — 69223-1 159 RG/U — — — 69141-1 — — — —N ConnectorsMiniature UHFConnectorsSMA Connectors50 Ohm Military 58 RG/U — — 220045-2 — — — — —Dual Crimp 8 RG/U — — — — — — 220015-1 —Dual Crimp 58 RG/U — — 220149-1 — — — — 58158-1 1Military174 RG/U,58 RG/U— — 220061-1 — — — — 220091-1 1Twin BNC Connectors — 108 RG/U — — — 69667 — — — 69708 11Use with “C” Head Straight Action Hand Tool, Part Number 69710-1.2Use with Platform Die Hand Tool, Part Number 58078-3.Note: For Instruction Sheets for thepart numbers listed on pages 2-4, callthe AMP Product Information Center at1-800-522-6752. Choose option "1" forAMP FAX Service.Insertion/Extraction Tools (Continued) Refer to chart on page 2.Extraction ToolPart No. 318851-1Extraction ToolPart No. 455822-2Extraction ToolPart No. 465644-1For drawings or technical data, contact your AMP sales engineer, or call the AMP Tooling Assistance Center at 1-800-722-1111.Dimensions are in inches and millimeters unless otherwise specified.Specifications subject to change. Consult AMP for latest specifications.Extraction/Lance Reset ToolPart No. 843996-33

Premium CERTI-CRIMP Hand ToolsCatalog 65780Revised 4-98Tooling OptionsDouble ActionHand Tool (DAHT)■ Dies travel in arc-likepath.■ Locator on tools forFASTON, MATE-N-LOK,PIDG and PLASTI-GRIP,and RF connectors.■ Insulation adjustment ontools for FASTON,MATE-N-LOK, PIDG andPLASTI-GRIP terminals.■ Approximate weight1.2 lb [0.54 kg].Straight ActionHand Tool (SAHT)■ Dies close in a straightline.■ Contact locator andsupport.■ Wire stop.■ Insulation crimpadjustment lever whenapplicable.■ Ejects crimped contact.■ Approximate weight1.3 lb [0.59 kg].Straight Action,Double Action Hand Tool(SADAHT)■ Same handles as DAHT.■ Dies close in a straightline.■ Contact locator andsupport.■ Approximate weight 1.5 lb[0.68 kg].T-HEADHand Tool■ Dies close in a straightline.■ Locator.■ Quick take-up on handlefor holding terminal orsplice in place.■ Adjust insulation crimpwith a four-positionscrew.■ Color coded.■ Approximate weight1.3 lb [0.59 kg].Heavy HeadHand Tool (HHHT)■ Designed to terminatemost large coaxial cableand heavy-gage wire.■ Dies close in a straightline.■ Locator and wire stopwhen applicable.■ Insulation adjustment ontools for AMPLI-BOND,PIDG and PLASTI-GRIPterminals.■ Approximate weight2.1 lb [0.95 kg]."C" Head Straight ActionHand ToolPart No. 69710-1■ Dies close in a straightline.■ Dies are interchangeable.■ Locators and other applicablefeatures included withdies.■ Approximate weight1.9 lb [0.86 kg].TETRA-CRIMP Hand ToolPart No. 59824-1■ Dies travel in arc-likepath.■ Multiple color-codedcrimping cavities.■ Terminal locator and wirestop.■ Ratchet control release.■ Approximate weight 1.4 lb[0.64 kg].Platform Die Hand ToolPart No. 58078-3■ Same frame configurationas TETRA-CRIMP HandTool.■ Dies are interchangeable.■ Adjustable terminal locator.■ Approximate weight1.4 lb [0.64 kg].4Printed on recycled paper.65780—5M—ASG—FP—4-98—T12—015Printed in USAAMP Incorporated, Harrisburg, PA 17105; Phone 717-564-0100, TAC fax: 717-810-2310; Internet: http://www.amp.comFor drawings or technical data, contact your AMP sales engineer, or call the AMP Tooling Assistance Center at 1-800-722-1111.Dimensions are in inches and millimeters unless otherwise specified.Specifications subject to change. Consult AMP for latest specifications.