C O N T R O L SY ST E M S - ELGO Electric GmbH

Compact controllers Control systems ELGO Electric372 7772min. 6696Side view92min. 92Excerpt fromswitch panel Installation depth including connector = 90 mmall dimensions in mmThe P30 is a very compact, user-friendly simple controllerwith relay outputs which enable a positioning withup to three speed options. An extensive range of commonposition parameters like, for example: spindleadjustment, manipulation tolerance window, adjustmentlimit, adjustable departure functions, referencevalues, saw blade/tool corrector and many others areincluded.An integrated adjustable impulse assessment factor andflank evaluation including a programmable decimalpoint are included in order to adapt to the relevantmeasuring system (rotary encoder or magnetic lengthmeasuring system).The P30 can be operated in manual inching mode(manual operation) and, in programmed operations, hasa 99 lines memory available.Technical data:Display:Dot matrix LCD with back lightingSupply voltage:230 VAC/50 Hz or115 VAC/60 Hz +/- 10 %optional 24 VDC +/- 10 %;450 mA at 24 VDC, 25 VA at 115 VAC,5 VA at 230 VACMeasuring system supply: 24 VDCDigital input signals:PNP, (optional NPN)min. 200 ms impulse durationInput frequency of meas. syst: 15 kHz (higher available uponrequest) per channel, A or BOutput signals:potential free NOC 220 V/ 2 AConnection technology: Plug-type, tension-relieved screwterminalsHardware:32 Bit microprocessor with768 KByte flash and 24 KByte RAMHousing:MetalKeyboard:Flim, short stroke keysProtection class:IP43(in installed condition from the front)Operating temperature: 0...50°CStorage temperature:0...70°CRelative humidity: Non-condensing max. 80 %