SprayDry® NozzleS - Spraying Systems Co.

WHIRLJET ® SprayDry ® Nozzles specificationsWhirlchamber Orifice SizesWhirlchamber Capacity No.Tangential Hole Dia. (mm)1 .067" (1.70)1.5 .083" (2.11)2 .096" (2.44)3 .125" (3.18)4 .130" (3.30)5 .136" (3.45)6 .145" (3.68)7 .152" (3.86)8 .161" (4.09)10 .172" (4.37)12 .187" (4.75)15 .159" (4.04) 2 holes20 .184" (4.67) 2 holesAccessoriesOrifice PressRemoves and installs orifice inserts from SprayDry Nozzle Caps.Request Data Sheet 22779High Pressure StrainerRequest Data Sheet 2820ordering informationType AA104 Complete Nozzle AssemblyInletNozzleInlet Slope Bottom WhirlchamberConn.Type - Type - Whirlchamber Capacity No.(NPT)Note: CP-48301-SS cap should be ordered with MFP cores for the SB-MFP.ExampleOrificeInsertNo. AA104 - 1/4 AA - TCX - 4 - 1.5Type AA104 comes standard with a slope bottom whirlchamber. Flat bottom whirlchambers and orifice inserts may be ordered separately. See component ordering information.Type SSTC Complete Nozzle AssemblyInletConn.(NPT)InletType -Slope BottomWhirlchamberNote: CP-48301-SS cap should be ordered with MFP cores for the SB-MFP.WhirlchamberCapacity No.ExampleOrificeInsertNo. 1/4 AA - SSTC 4 - 2Type SSTC comes standard with a flat bottom whirlchamber. Slope bottom whirlchambers and orifice inserts may be ordered separately. See component ordering information.WhirlchambersWhirlchamberWhirlchamberTungstenSlope Bottom*Capacity No. CarbideWC4X * -Note: CP-48301-SS cap should be ordered with MFP cores for the SB-MFP.-ExampleTC* Leave blank for flat bottomOrifice InsertsWhirlchamberNote: CP-48301-SS cap should be ordered with MFP cores for the SB-MFP.-ExampleOrificeInsert No.CarbideWI4 -YC30spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000