Littac MSDS - Pest Control Management - BASF

Page: 8/15BASF Safety data sheet according to Regulation (EC) No. 1907/2006Date / Revised: 06.02.2013 Version: 2.0Product: LITTAC(ID no. 30275898/SDS_GEN_GB/EN)Date of print 06.02.2013Flash point:(DIN EN 22719; ISO 2719)No flash point - Measurement madeup to the boiling point.Evaporation rate:not applicableFlammability:not flammableLower explosion limit:not determinedUpper explosion limit:not determinedIgnition temperature: 425 °CThe product has not been tested.The statement has been derived fromsubstances/products of a similarstructure or composition.Vapour pressure: approx. 23.4 hPa(20 °C)Information applies to the solvent.Density:approx. 1.00 - 1.05 g/cm3(OECD Guideline 109)(20 °C)Relative vapour density (air):not determinedSolubility in water: dispersiblePartitioning coefficient n-octanol/water (log Kow):not applicableThermal decomposition: not determinedViscosity, dynamic: 21 mPa.s(OECD 114)(40 °C, 100 1/s)Viscosity, kinematic: 20.6 mm2/s(40 °C)Explosion hazard: not explosiveFire promoting properties: not fire-propagating9.2. Other informationOther Information:If necessary, information on other physical and chemical parameters is indicated in this section.SECTION 10: Stability and Reactivity10.1. ReactivityNo hazardous reactions if stored and handled as prescribed/indicated.Corrosion to metals:mild steel tin10.2. Chemical stabilityThe product is stable if stored and handled as prescribed/indicated.10.3. Possibility of hazardous reactionsNo hazardous reactions if stored and handled as prescribed/indicated.