GRS Instructions - TrueRife
GRS Instructions - TrueRife
GRS Instructions - TrueRife
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>GRS</strong> <strong>Instructions</strong>Galvanic Resonant ScannerThank-you for purchasing the <strong>GRS</strong> Intercept / Phaser model. This is thefirst scanning device to interface with a Rife Plasma system!First plug in the <strong>GRS</strong> to the F-117 Intercept using the supplied BNC cable aspictured. Some Intercepts may have the BNC located at a different locationon the back of the machine than pictured.The Galvanic Resonant Scanner is designed to pick up which frequencies ina session may be the ones producing results, often referred to as "hits" byRife researchers.Hits are the frequencies that are causing a physiological response, possiblyindicating the need to extend this frequency or repeat in further Rifesessions.This can reduce the time needed to run additional sessions, as targetfrequencies are isolated! Typical Rife session may run from 30-60 minutesor in some cases even hours!1. Plug the <strong>GRS</strong> control module and into an electrical outlet.Page 4
Change language