70 - Bridon

REVISED 08/10/08A D V A N C E D R O P E L U B R I C A N T S706ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONSSpilt product presents a significant slip hazard. Avoid exposure of product to sourcesof Ignition.ENVIRONMENTAL PRECAUTIONSPrevent entry of hot material into drains, sewers and watercourses.SPILL CLEAN UP METHODSScrape or shovel up and transfer to suitable containers. Clean affected area.7HANDLING AND STORAGESTORAGE PRECAUTIONSStore between 0° - 40°C8EXPOSURE CONTROLS/PERSONAL PROTECTIONName Std LT-ppm LT-mg/m3 ST-ppm ST-mg/m3RESIDUAL OILS (PETROLEUM), OES 5 mg/m3 10 mg/m3SOLVENT-DEWAXED; BASEOIL - (Oil mist) (Oil mist)UNSPECIFIEDINGREDIENT COMMENTSOES = Occupational Exposure Standard. MEL = Maximum Exposure Limit.PROTECTIVE EQUIPMENTENGINEERING MEASURESProvide sufficient ventilation during operations which cause vapour formation.HAND PROTECTIONUse suitable protective gloves if risk of skin contact.EYE PROTECTIONWear approved safety goggles.OTHER PROTECTIONWear appropriate clothing to prevent any possibility of skin contact.HYGIENE MEASURESWash at the end of each work shift and before eating, smoking and using the toilet.9PHYSICAL AND CHEMICAL PROPERTIESAPPEARANCEGreaseCOLOURBlackODOURCharacteristicRELATIVE DENSITY 0.85 - 0.95 20 FLASH POINT (°C) >230 CC (Closed cup).