Mowilith LDM 760.IN Liq - Clariant

Mowilith LDM 760.IN LiqWorking Principle of a Prime Coat1. Strongly reduced absorption ability of the substrate2. The entry of rain into the substrate through defects in thecoating is avoided3. Deactivation of cracks in the substrate4. Dirt agglomeration is avoided5. Humidity creeping is avoided6. Neither water nor water soluble aggressive salts or bases mayconcentrate in direct vicinity of the coating7. Loosened particles of sanding substrates are boundPenetration Behaviour of anOptically Brightened Emulsioninto Mortarusage of a 17 wt-% solutionCoatingPrime Coaton the SubstrateBinding Power Determinationof a Prime Coat2 ml primersolutionSubstrateAfter putting theQuartz Sand W6 primer into thesand dry at 50°Cover nightWeighing of the formed sand bodyDetermination of thetoughness of the sandbody by Kempf-Stampwww.clariant.inClariant Chemicals (India) Ltd.TLP DivisionP.O. Sandoz Baug, Kolshet RoadThane 400 607Phone: 91 22 25315118Fax: 91 22 2531 5131Email: asis.patnaik@clariant.comMany of their dyestuffs, pigments, and chemicals are patented by Clariantin numerous industrial countries.® Trademark of Clariant registered in numerous countries.® * Trademark registered in numerous countries and licensed to Clariant.® + Other Manufacturer's registered trademarkThe signs ® , ® * and ® + appear only at the first mention of the productThe information and recommendations presented here were compiledwith the utmost care, but cannot be extended to cover every possiblecase. They are intended to serve as non-binding guidelines and must beadapted to the prevailing conditions.