Internal Softwood Doors - Howdens Joinery

Internal Softwood DoorsDIC29** 4 Panel Knotty PineCarefully constructed from high quality pine, this classicdoor will complement many homes.G• Dowelled construction• Raised and fielded panels• Quality knotty pine timbers, suitable for staining orpaintingDFEDimensionsDoor Width 2’0” 2’3” 2’6” 2’9”Product Code DIC2930 DIC2940 DIC2960 DIC2970Building RegulationsMThickness (mm) 35 35 35 35Weights (kg) 15 16 17 18A = width (mm) 610 686 762 838B = width - stiles (mm) 418 494 570 646C = stile (mm) 96 96 96 96D = height (mm) 1981 1981 1981 1981E = bottom rail (mm) 132 132 132 132F = middle rail (mm) 124 124 124 124G = top rail (mm) 96 96 96 96All sizes subject to standard industry tolerancesPart M Doors (M) - Mobility and AccessLock BlockA lock block is not included on this dooras it is a solid construction. The lock canbe fitted in any location on either side.CBAC

Internal Softwood DoorsTechnical SpecificationConstructionVeneer SpecificationEdging InformationGeneralDowel and glue engineered stiles andrailsCore Material and Grade N/AThickness of Core Material ?Timber SpeciesEllioti / Patula, Radiata, TaedaMoisture Content 8-12%Glue Specification D3 Semi ExteriorAdditional InformationGeneralThicknessTimber SpeciesGradeCountry of OriginKnotty pineEx 1.2mm, and finished 0.8mmEllioti / Patula, Radiata, TaedaABrazilLipping Dimensions Maximum TrimTop (mm) 16 3Bottom (mm) 16 3Each side (mm) 16 3Lipping material: Natural pineAn equal amount of timber should be removed fromeach side / top & bottom. Remaining within theparameters of the maximum trim instructions ensuresthe construction of the door is not compromised.Fitting and FinishingPlease refer to door instructions for all fitting information.For identification, the Howdens Joinery logo is printed on the topof the door.This door is suitable for finishing with: paint or stain.All paints and stains sold by Howdens are suitable for use withHowdens doors (Please always follow manufacturer's instructions)Fire CertificateGlazing CertificateCertificationNot applicableNot applicableIssue Date: 21.02.2012The company has a policy of continuous product development andreserves the right to change any products and specifications at any time.