CORED WIRES & ELECTRODES

SK D 12-GDIN 8555 : MF 3-GF-55-TDESCRIPTION 1Special alloy designed for the hard surfacing of tool steels.SUITABLE FOR 22Hot shear blades, hot punches, hot extrusion dies, mill guides, moulds, sheet punching tools, ingot points plier.TYPICAL CHEMICAL ANALYSIS (WEIGHT %) 33All WeldC Mn Si Cr Mo Fe Ti0.35 1.2 0.4 7.50 1.7 Bal. 0.3TYPICAL MECHANICAL PROPERTIES 44Hardness as welded55 HRCGENERAL CHARACTERISTICS 55••Microstructure••Machinability••Oxy-acetylene cutting••Deposit thickness••Shielding gas••Metal coredMartensiteGood with cubic Boron Nitride tipped toolsCannot be flame cutDepends upon application and procedure usedArgon 98% + Oxygen 2%CORED WIRES 6 TOOL STEELWELDING PARAMETERS & ECONOMICAL DATA 66Diameter[mm]Current[A]Voltage[V]Stick-Out[mm]Gas Rate[l/min]ArticlecodePackagingAvailability1,2 200-300 25-31 20 max 12-15 29599 Spool 15 KgStandard1,6 250-450 25-31 20 max 15-18 29600 Spool 15 KgStandardThe information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can'tassume any form of liability concerning the exactness of it. The information may be changed or updated without previous notice. The user isinvited to test the product with regard to his own application and responsibility.| SOUDOKAY SA | RUE DE L'YSER 2 | B-7180 SENEFFE | BELGIUM | soudokay @ soudokay.be | www. soudokay.com| SALES: T+32 (0)64 51 02 25 - F+32 (0)64 51 02 21 | LOGISTICS: T+32 (0)64 51 02 10 - F+32 (0)64 51 02 19 | FINANCE: T+32 (0)64 52 00 30 - F+32 (0)64 52 00 31211