CORED WIRES & ELECTRODES

SK F-EHCR65-GDIN 8555 : MF 10-GF-65-GTDESCRIPTION 1Chromium-Niobium-Molybdenum alloy with addition of Tungsten and Vanadium designed to resist high stress grinding abrasion with low impact andsolid erosion at service temperatures up to 650°C. The deposits will readily stress relief check crack. This coreSUITABLE FOR 22Wear plates, Sinter finger crushers, exhaust fan blades in pellet plants, perlite crushers, bucket teeth and lips on bucket-wheel excavators inphosphate mines, Boiler fan blades in the sugar cane industry, burden area in blast furnace bells, wear platesTYPICAL CHEMICAL ANALYSIS (WEIGHT %) 33All WeldC Mn Si Cr Mo Nb W V Fe5.30 0.2 0.7 21.00 6.3 6.00 1.9 0.75 Bal.TYPICAL MECHANICAL PROPERTIES 44Hardness as welded63 HRCGENERAL CHARACTERISTICS 55••MicrostructureAustenitic matrix with complex carbides of different typesChromium rich hexagonal primary carbides,••eutectic carbides and nodular Niobium carbides.••MachinabilityGrinding only••Oxy-acetylene cutting Cannot be flame cut••Deposit thickness 8 to 12 mm in 2 or 3 layers••Metal cored••Shielding gasI1 (100%Ar), M11(Ar+2.5%CO2), M13(Ar+2%O2) : acc. to EN 439WELDING PARAMETERS & ECONOMICAL DATA 66Diameter[mm]Current[A]Voltage[V]Stick-Out[mm]Gas Rate[l/min]ArticlecodePackagingAvailability1,6 180-300 27-30 20 max 15-20 45812 Spool 15 KgOn request316CORED WIRESThe information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can'tassume any form 7ofliability concerning the exactness of it. The information may be changed or updated without previous notice. The user isHIGH METAL CARBIDESinvited to test the product with regard to his own application and responsibility.| SOUDOKAY SA | RUE DE L'YSER 2 | B-7180 SENEFFE | BELGIUM | soudokay @ soudokay.be | www. soudokay.com| SALES: T+32 (0)64 51 02 25 - F+32 (0)64 51 02 21 | LOGISTICS: T+32 (0)64 51 02 10 - F+32 (0)64 51 02 19 | FINANCE: T+32 (0)64 52 00 30 - F+32 (0)64 52 00 31