Presentation 2nd IAG Task1 Codes of practice - ESR Technology

More documents

Recommendations

Info

Assessment and Criticality of Defects and Damage in Materials Systems• Purpose– Review & assess current industrial guidelines & codes of practicefrom a range of industrial sectors• Procedure– Review existing guidelines for defect assessment (Dow, CEN, BSI,ISO, ASME, NORSOK, ESA, NASA, Boeing, MIL HDBK-17, etc.)– Examine defect types applicable to various materials systems– Review approaches for different industry sectors– Compare defect assessment codes for metallics– Task 1 report issued to IAG for comment and subsequently revised© 2003 AEA Technology plc
MMS 13 Assessment and Criticality of Defects & Damage in Materials SystemsTask 7Case studiesIndustrysupport(range ofsectors)Task 6Draft procedural guideTask 8DisseminationTask 2 – Experimental testing (material data from MERL)Task 3 – NDE assessment (acoustic emission information from Brunel)Task 4 – Defect characterisationTask 5 – Assessment of defect criticalityTask 1- Review of industrial guidelines &Codes of PracticeOther/ past programme inputsCPD, DCC, VAMAS, MMS4, MMS5, MMS15, IACFA, AMCAPSIIAEA main tasks© 2003 AEA Technology plc
Page 1: Assessment and Criticality of Defec
Page 5 and 6: Assessment and Criticality of Defec
Page 11 and 12: Interlaminar andTransverse cracking
Page 13 and 14: Matrix cracking/delamination after
Page 19 and 20: APPLICATIONS IN INDUSTRY SECTORSPRO
Page 21 and 22: BS 4994: 1987 Table 16 - Permissibl
Page 23 and 24: © 2003 AEA Technology plc
Page 25 and 26: Allowable defects as defined by ASM
Page 27 and 28: MMS 13 Assessment and Criticality o
Page 37: Assessment and Criticality of Defec

Presentation 2nd IAG Task1 Codes of practice - ESR Technology

Create successful ePaper yourself

Delete template?

Save as template?